View
117
Download
0
Category
Preview:
Citation preview
ETS4- Was ist neu?- Wie fange ich an?- Noch Fragen?
KNX Association International Page No. 2; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
Was ist neu?
KNX Association International Page No. 3; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
ETS4 – Fakten & Zahlen
Wichtige ETS4 Neuigkeiten!
3. Es ist offen!ETS4 erlaubt Zugriff auf Import/ Exportdaten und auch zur Laufzeit Zugriff auf Im-/ Exportdaten durch XML basiertes Austauschformat Neue Add In Schnittstelle erlaubt Zugriff zur ETS4 auch zur Laufzeit
2. Es ist schnell!ETS4 beschleunigt den Projektierungsablauf und Datenaustausch Projekt und Produktdatenimport ist mind. zweimal schnellerNotwendige Schritte von Projekterzeugung bis Download sind effizienter
1. Es ist einfach!Die neue ETS4 Oberfläche macht es einfacher mit KNX anzufangen! Einfaches ETS Projekt Setup sowie Projekt Erstellung für KNX EinsteigerBessere Oberfläche, schneller Zugriff auf meist genutzten Funktionen
KNX Association International Page No. 4; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
Gehen wir mehr ins Detail …
KNX Association International Page No. 5; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
ETS4 – Fakten & Zahlen
1. Es ist einfach!Die neue ETS4 Oberfläche macht es einfacher mit KNX anzufangen! Einfaches ETS Projekt Setup sowie Projekt Erstellung für KNX EinsteigerBessere Oberfläche, schneller Zugriff auf meist genutzte Funktionen
Direkte Dateneingabe in der Seitenleiste
Direkte Dateneingabe in der Seitenleiste
Parameterdialog direkt sichtbar
im Hauptfenster
Parameterdialog direkt sichtbar
im Hauptfenster
Zugriff auf viele Zusatzfunktione
n
Zugriff auf viele Zusatzfunktione
n
KNX Association International Page No. 6; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
ETS4 – Fakten & Zahlen
2. Es ist schnell!ETS4 beschleunigt den Projektierungsablauf und Datenaustausch Projekt und Produktdatenimport ist mind. zweimal schneller Notwendige Schritte von Projekterzeugung bis Download sind effizienter
ETS4 ETS3
KNX Association International Page No. 7; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
ETS4 – Fakten & Zahlen
3. Es ist offen!ETS4 erlaubt Zugriff auf Import/ Exportdaten und auch zur Laufzeit Zugriff auf Im-/ Exportdaten durch XML basiertes Austauschformat Neue Add In Schnittstelle erlaubt Zugriff zur ETS4 auch zur Laufzeit
ETS4
KNX Association International Page No. 8; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
Wie fange ich an?
KNX Association International Page No. 9; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
Wichtigste ETS4 Arbeitsschritte! Lassen Sie uns die wichtigsten ETS4 Arbeitsschritte abarbeiten, die Erzeugung einer KNX Installation von Beginn an. Folgende Schritte führen wir durch:
1.Starten der ETS4
2.Erzeugen einer neuen Datenbank
3.Import Hersteller Produkt (Kataloge)
4.Erstellen eines neuen Projektes
5.Erstellen einer Installation
6.Anpassen von Produkt Parametern
7.Download und Prüfung des Projektes
8.Beenden der ETS4
ETS4 – Fakten & Zahlen
KNX Association International Page No. 10; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
1. Starten der ETS4
ETS4 – Live Demo
Doppelklick auf das Desktop Symbol
Doppelklick auf das Desktop Symbol
KNX Association International Page No. 11; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
2. Erzeugen einer neuen Datenbank
ETS4 – Live Demo
Klick zur Erstellung neuer Datenbank
Klick zur Erstellung neuer Datenbank
KNX Association International Page No. 12; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
2. Erzeugen einer neuen Datenbank
ETS4 – Live Demo
Datenbank Namen eingeben und OK klicken
Datenbank Namen eingeben und OK klicken
KNX Association International Page No. 13; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
2. Erzeugen einer neuen Datenbank
ETS4 – Live Demo
“OK” bestätigen wenn beendet
“OK” bestätigen wenn beendet
KNX Association International Page No. 14; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
3. Import Hersteller Produkt (Kataloge)
ETS4 – Live Demo
Katalog Tab selektieren Katalog Tab selektieren
KNX Association International Page No. 15; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
3. Import Hersteller Produkt (Kataloge)
ETS4 – Live Demo
Importiere Produkte via klick “Import”
Importiere Produkte via klick “Import”
Kataloge noch leer (keine Produkte)
Kataloge noch leer (keine Produkte)
KNX Association International Page No. 16; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
3. Import Hersteller Produkt (Kataloge)
ETS4 – Live Demo
Selektiere Produkt Daten Datei
Selektiere Produkt Daten Datei
KNX Association International Page No. 17; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
3. Import Hersteller Produkt (Kataloge)
ETS4 – Live Demo
Import beendet! Import beendet!
KNX Association International Page No. 18; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
4. Erstellen eines neuen Projektes
ETS4 – Live Demo
Selektiere Projekt Tab
Selektiere Projekt Tab
KNX Association International Page No. 19; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
4. Erstellen eines neuen Projektes
ETS4 – Live Demo
Klick “Neu” (Projekt)
Klick “Neu” (Projekt)
KNX Association International Page No. 20; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
4. Erstellen eines neuen Projektes
ETS4 – Live Demo
Projektnamen eingeben
Projektnamen eingeben
KNX Association International Page No. 21; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
4. Erstellen eines neuen Projektes
ETS4 – Live Demo
Projekt erstellt Projekt erstellt
KNX Association International Page No. 22; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
4. Erstellen eines neuen Projektes
ETS4 – Live Demo
Projekt wählen und „Öffnen“ klicken
Projekt wählen und „Öffnen“ klicken
KNX Association International Page No. 23; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
“Gebäudeansicht” ist offen
“Gebäudeansicht” ist offen
KNX Association International Page No. 24; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
“Gebäude” und “Raum” hinzufügen
“Gebäude” und “Raum” hinzufügen
KNX Association International Page No. 25; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
“Gebäude/ Raum” erzeugt
“Gebäude/ Raum” erzeugt
KNX Association International Page No. 26; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
Geräte hinzufügenGeräte hinzufügen
KNX Association International Page No. 27; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
“Produkt Sucher ”offen
“Produkt Sucher ”offen
KNX Association International Page No. 28; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
Auswählen/ ziehen der Produkte zum “Raum”Auswählen/ ziehen der Produkte zum “Raum”
KNX Association International Page No. 29; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
Produkte eingefügt Produkte eingefügt
KNX Association International Page No. 30; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
“Produkt Sucher” schließen
“Produkt Sucher” schließen
KNX Association International Page No. 31; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
“Gruppenadress Ansicht” hinzufügen
“Gruppenadress Ansicht” hinzufügen
KNX Association International Page No. 32; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
Haupt/ Mittel & Gruppenadresse
hinzufügen
Haupt/ Mittel & Gruppenadresse
hinzufügen
KNX Association International Page No. 33; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
1. Hauptgruppe1. Hauptgruppe
KNX Association International Page No. 34; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
2. Mittelgruppe2. Mittelgruppe
KNX Association International Page No. 35; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
3. Gruppenadresse3. Gruppenadresse
KNX Association International Page No. 36; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
Gruppenadresse Gruppenadresse
KNX Association International Page No. 37; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
Ziehen der “Objekt(e)” zur
Gruppenadresse
Ziehen der “Objekt(e)” zur
Gruppenadresse
KNX Association International Page No. 38; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
5. Erstellen einer Installation
ETS4 – Live Demo
Verbindungen erzeugt
Verbindungen erzeugt
KNX Association International Page No. 39; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
6. Anpassen von Produkt Parametern
ETS4 – Live Demo
Gerät wählen und “Parameter” klicken
Gerät wählen und “Parameter” klicken
KNX Association International Page No. 40; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
6. Anpassen von Produkt Parametern
ETS4 – Live Demo
Parameter ändernParameter ändern
KNX Association International Page No. 41; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
7. Download und Prüfung des Projektes
ETS4 – Live Demo
Gerät wählen und “Download” Dialog öffnen
Gerät wählen und “Download” Dialog öffnen Download beendetDownload beendet
KNX Association International Page No. 42; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
7. Download und Prüfung des Projektes
ETS4 – Live Demo
Gerät wählen und “Geräte Info” Dialog öffnen
Gerät wählen und “Geräte Info” Dialog öffnen
KNX Association International Page No. 43; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
7. Download und Prüfung des Projektes
ETS4 – Live Demo
“Geräte Info” Upload läuft“Geräte Info” Upload läuft
KNX Association International Page No. 44; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
7. Download und Prüfung des Projektes
ETS4 – Live Demo
Geräte Info aufklappenGeräte Info aufklappen
KNX Association International Page No. 45; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
8. Exit ETS4
ETS4 – Live Demo
Wechseln zum ETS Menü
Wechseln zum ETS Menü
KNX Association International Page No. 46; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
8. Beenden der ETS4
ETS4 – Live Demo
ETS4 beendenETS4 beenden
KNX Association International Page No. 47; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
Noch Fragen?
KNX Association International Page No. 48; 11 Apr 2023KNX: The worldwide STANDARD for home & building control
Wichtige ETS4 Fragen!
ETS4 - Facts & Figures
4. Läuft die ETS4 auch unter Windows 7? Ja.
Die ETS4 kann auf Windows XP, Vista und Windows 7 32/64 Bit Versionen installiert werden. Die ETS4 kann parallel zu einer ETS3 installiert werden (wo die ETS3 Installation erlaubt ist).
3. Ich habe schon eine ETS gekauft; sind hier Upgrades verfügbar? Ja.
Der Preis hängt von der ETS Version ab von der Sie das Upgrade wollen (ETS2/3). In jedem Fall ist dieser Preis geringer, verglichen mit einer neuen Lizenz.
2. Geht es die ETS4 kostenlos zu testen wenn diese veröffentlicht wird? Ja.
Sie können eine kostenlose DEMO Version downloaden. Die einzige Limitierung ist die Anzahl der Geräte die man pro Projekt nutzen kann (3). Auch Buszugriff (Online gehen) ist möglich.
1. Kann ich meine ETS2 und ETS3 Projekte auch in der ETS4 nutzen?Ja.
ETS4 erlaubt den Import von Projekten/ Produkten ab der ersten ETS2 und allen ETS3 Versionen.
Danke für Ihre Aufmerksamkeit!
Recommended