View
3
Download
0
Category
Preview:
Citation preview
LORO-XP Druckrohrschelle PN 12*LORO-XPAnchor Clip for Pressure Pipes PN 12*
Als Bestandteil des LORO-X Stahlab-flussrohr-/LORO-XCL Edelstahlabfluss- rohr- Programms hat das LOROWERK für den Bereich Feuerlöschleitungen unter dem Namen LORO-XP Druckrohr ein leichtes, flexibles, druckfestes, sicheres, nach IACS-Regeln geprüftes System mit besonders geringen Maßtoleranzen entwickelt. Der Vorteil der druckfesten LORO-XPRohrverbindung liegt in der leichten Verlegung, bei der keine Passstücke erforderlich sind. Die Rohre können einfach abgelängt werden. Zertifizierung:Die Prüfung der LORO-XP Druckrohrschelle PN 12 (Prüfdruck 48 bar)erfolgte nach IACS UR P2.11 Regeln und wurde durch den Germanischen Lloyd zertifiziert. LORO-XP Druckrohrschellen sind in DN 50 - DN 125 lieferbar.Dichtelemente sind in den Qualitäten NBR, SBR, VQM und EPDM erhältlich.
As a part of the LORO-X galvanised steel/LORO-XCL stainless steel drainage pipe programm, LOROWERK has developped a new pipe system called LORO-XP pressure pipe. This pipe system with especially small dimensional tolerances is lightweight, flexible, pressure-resistant, safe and tested according to IACS-standards. The advantage of the steady pressure LORO-XP pipe connection is the easy installation, without the demand of fitting pieces. The pipes can be cut to length simply. Certification:The testing of the LORO-XP Anchor Clip for pressure pipes PN 12 (test pressure 48 bar) according to IACS P2.11 rules and is certified by Germanischen Lloyd. The LORO-XP Anchor Clip for pressurepipes are available in DN 50 - DN 125.Sealing elements can be supplied inNBR, SBR, VQM and EPDM qualities.
Technischer Stand/Technical Status: Mai 2011Technische Änderungen vorbehalten/Subject to technical modifikation
AKTUELL 114 DRS_3.indd
aktu
ell 1
14
*nur einsetzbar im LORO-XPSystem aus Orginal-LORO-X Rohren und Formteilen.
*only applicable at LORO-XP system composed of originalLORO-X pipes and fittings.
AKTUELL 114 DRS_3.indd 15.3.21 Vb/Hop 2/2
LORO-XP Stahlabflussrohre/LORO-XP Steel Discharge Pipes
Druckrohrschelle/Anchor Clip for Pressure Pipes
LOROWERK K.H. Vahlbrauk GmbH & Co. KGKriegerweg 1 • 37581 Bad Gandersheim, Postfach 13 80 • 37577 Bad Gandersheim Tel. +49(0)53 82.710 • Telefax +49(0)53 82.71203 • Internet: www.loro.de • e-mail: infocenter@lorowerk.de
DruckrohrschelleLORO-X Anchor Clip for Pressure Pipes
DichtelementSealing element
AnkerringAnchor ring
StützringSupport ring
LORO-XStahlabflussrohrDN 50 - DN 125LORO-XSteel Discharge PipesDN 50 - DN 125
Sechskantmutter mit FlanschDN 50 - DN 100: 4xDN 125: 6xHexagon nut with flangeDN 50 - DN 100: 4xDN 125: 6x
Sechskantschraube mit FlanschDN 50 - DN 100: 4xDN 125: 6xHexagon screw with flangeDN 50 - DN 100: 4xDN 125: 6x
Einzelteile/Single Parts
Abmessungen / Dimensions
D
h DN Art.-Nr./No. D h
50 08070.050X 130 52
70 08070.070X 150 63
80 08070.080X 170 79
100 08070.100X 190 94
125 08070.125X 230 95
Recommended