View
27
Download
0
Category
Preview:
Citation preview
A1 WLAN Box
Ihre A1 WLAN Box funktioniert nicht und/oder die LEDs auf der Funktionsanzeige leuchten nicht?
LED Funktionsanzeige
• Überprüfen Sie, ob das Netzgerät mit Strom versorgt wird und die A1 WLAN Box eingeschaltet ist.
• Überprüfen Sie, ob Ihre A1 WLAN Box richtig verkabelt ist.• Starten Sie die A1 WLAN Box durch Aus- und Einstecken
des Stromkabels neu.
Schnellstart
1
130.8m
m
2
x2
x2 15
3.89~3.98
2.1-2.3
6.8~7.1
Unit: mm
Wall Mount Screw
1
2
3
1
2
3
EN
DE
Drill two holes on the wall at the distance of 130.8mm.
Insert screw anchors and screws (not provided) into the holes.
Place the DX3101-B0 so the wall mount holes line up with the screws. Slide the DX3101-B0 down gently to fix it into place.
Bohren Sie zwei Löcher im Abstand von 130.8mm in die Wand.
Schieben Sie Dübel in die Löcher und schrauben Sie jeweils eine Schraube hinein (nicht im Lieferumfang enthalten).
Stellen Sie das DX3101-B0 so auf, dass die Bohrungen für die Wandmontage mit den Schrauben übereinstimmen. Schieben Sie das DX3101-B0 vorsichtig nach unten, um es zu fixieren.
(Optional)
(Optional)
4 Wall Mounting / Wandbefestigung (Optional)
2/2
Schnellstart-Assistent
Lassen Sie uns starten.
1Zeitzone
2Internet
3WiFi
Benutzername
PasswortXXXXXXXXXX
admin
Login
Login
10.0.0.138
6
6
DE
Open a web browser and go to http://10.0.0.138. Enter the default User name (admin) and admin Login Password (on the device label), and then click Login. The wizard runs. Follow the wizard prompts to complete the setup.
Öffnen Sie einen Webbrowser, und rufen Sie http://10.0.0.138 auf. Geben Sie den GUI Benutzernamen (admin) und das GUI Passwort für admin (auf dem Etikett des Geräts) ein und klicken Sie anschließend auf Login. Ein Assistent wird ausgeführt. Folgen Sie den Anweisungen des Assistenten.
5-a
5-b
5-c
EN
EN
5-a
5-b
5-c
DE
Use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.
Scan the QR code on the device label then follow the prompts to connect to the WLAN on your mobile device.
Press the WPS button until the WPS LEDs blinks amber. Press the WPS button on the client. If the WPS method fails, use the manual method (5-a).
Der WLAN Name und der WLAN-Schlüssel befinden sich auf dem Etikett am Gerät. Suchen Sie diesen WLAN Namen auf Ihrem Smartphone oder Notebook. Geben Sie den WLAN-Schlüssel für die WLAN-Verbindung ein.
Scannen Sie den QR-Code auf dem Geräteetikett und befolgen Sie die Anweisungen, um eine Verbindung zum WLAN auf Ihrem Mobilgerät herzustellen.
2 WiFi Connection / WLAN-Verbindung
3 Quick Start Wizard / Installationsassistent
WiFi
A1_XXXXXX
Connect
within
2 minutes
More than 1 second
6
WLAN Name
WLAN Passwort
A1_XXXXXX
XXXXXXXXXX
OR
10.0.0.138
3
WLAN Name: A1_XXXXXXWLAN Passwort: XXXXXXXXXXGUI Login: 10.0.0.138GUI Benutzername: adminGUI Passwort: XXXXXXXXXX
Typschild
5-a 5-b
5-c
Drücken Sie auf die WPS-Taste, bis die WPS LED orange blinkt. Drücken Sie die WPS Taste
am Client-Gerät. Wenn die WPS Einrichtung fehlschlägt, benutzen Sie bitte die manuelle
Einrichtung (5-a).
WPSON
Willkommen bei Ihrer A1 WLAN Box!
Paketinhalt
Wichtige Hinweise
A1 WLAN Box Stromkabel Netzwerkkabel Y-Kabel
Vorb
ehal
tlich
Sat
z- u
nd
Dru
ckfe
hle
r. St
and
08/
2020
Eine ausführliche Schritt für Schritt Anleitung zurInstallation finden Sie auf A1.net/Installationsanleitung
• Platzieren Sie die A1 WLAN Box für eine optimale WLAN-Qualität möglichst freistehend.
• Bitte beachten Sie, dass es nach der Installation bis zu 24 Stunden dauern kann, bis Sie mit voller Geschwindigkeit surfen können. Die A1 WLAN Box lassen Sie in dieser Zeit bitte eingeschaltet.
Selbst installieren geht ganz einfach.
1-40
0-00
4-38
2
Status Anzeige Aktivität
Package Contents / Inhalt
Power Adapter
Netztteil
Ethernet Cable
Ethernetkabel
Quick Start Guide
Kurzanleitung
DoC
Declaration of Conformity
Safety Warnings
CE-ErklärungSicherheitshinweise
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.https://www.zyxel.com/dk/da/
1-a
1-b
1-a
1-b
OR
1/2
1 Hardware Installation
DX3101-B0
DSL
1-a
WAN
1-b
Connect the DSL port directly to the telephone socket on the wall (1-a) using an appropriate DSL cable (not included).OR Use an Ethernet cable to connect the WAN port to the ONT box on the wall (1-b).Connect a phone to the phone port using a phone cable (optional).Connect a computer to the LAN port using the Ethernet cable (optional).Connect the power cable to the Zyxel Device and press the power button .
Verbinden Sie den DSL-Anschluss über ein entsprechendes DSL-Kabel (nicht im Lieferum-fang enthalten) direkt mit der Telefondose an der Wand (1-a).ODER Verbinden Sie den WAN-Anschluss mit der ONT-Box an der Wand (1-b). Verwenden Sie dazu ein Ethernet-Kabel.Schließen Sie ein Telefon mit dem Telefonkabel an den Telefonanschluss an (optional).Schließen Sie einen Computer mit dem Ethernet-Kabel an den LAN-Port an (optional).Schließen Sie das Netzkabel an das Modem an und drücken Sie auf die Ein/Aus-Taste.
32
4
234
EN
DE
Quick Start GuideKurzanleitungENGLISH | DEUTSCH
VDSL2 35b 2+2 11ac Dual Band Concurrent IAD Zyxel DeviceDX3101
Support InformationEUhttps://support.zyxel.eu
Copper Connection / Kupferanschluss Fiber Connection / Glasfaseranschluss
(Optional) (Optional)
OR
LANPHONE1
POWER ON
POWER
42 3
Phone Socket / Telefondose ONT Box / Glasfasermodem
Power
On - Internet is connected.Blinking - Sending or receiving data through default gateway.On - Failed to get IP address.One Blink - PPP authentication failed.Off - No connection.
Green
Red
---
---
On - LAN is connected.Blinking - Sending or receiving data.
Off - No connection.
Green
---
On - WiFi is ready.Blinking - Establishing WPS connection.
Blinking - No connection.
Off - WiFi is disabled, or link is down.
Green
Amber
---
On - SIP account is registered and VoIP is ready.Blinking - Incoming VoIP call, or phone is off the hook.
Off - SIP account not working, or no VoIP network connection.
Off - VoIP disabled, or no SIP account is registered to the phone port .
Green
Amber
---
On - Device is ready.Blinking (Slow) - Starting up.Blinking (Fast) - Upgrading firmware.
Green
Red On - Device error.Off - Power is off.
On - DSL or WAN Ethernet port is connected.Blinking (Slow) - Detecting DSL carrier signal.Blinking (Fast) - Establishing DSL connection.
Green
Internet
LAN
2.4G/5G
Phone
Off - DSL port not active or WANoE modem not connected.WAN
LAN
Power
AN - Datenübertragung über den ausgewählten Port aktiv.Blinkend - Datenübertragung aktiv.
An - PPP-Authentifizierung fehlgeschlagen.1 x blinkend - Authentifizierung fehlgeschlagen.
Aus - keine Internetverbindung.
Grün
Rot
---
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.
Aus - Kein Gerät am LAN-Port angeschlossen.
Grün
---
An - Gerät betriebsbereit.langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.
Grün
Rot An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Aus - DSL Schnittstelle nicht aktiviert bzw. kein WANoE-Modem angeschlossen.---
An - DSL- oder WANoE-Verbindung ist hergestellt.langsam blinkend - DSL- Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.
Grün
Internet
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.
Blinkend - WPS aktiv, Client kann verbunden werden.
Aus - WLAN ist ausgeschaltet.
Grün
Orange
---
An - Alle Telefonnummern angemeldet, Internettelefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.
An - Rufnummer-Anmeldung nicht erfolgreich, z.B. falsche Zugangsdaten.
Aus - Internet-Telefonie nicht aktiviert.
Grün
Orange
---
2.4G/5G
Phone
WAN
Grün
Rot--
An - Gerät betriebsbereit.Langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Package Contents / Inhalt
Power Adapter
Netztteil
Ethernet Cable
Ethernetkabel
Quick Start Guide
Kurzanleitung
DoC
Declaration of Conformity
Safety Warnings
CE-ErklärungSicherheitshinweise
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.https://www.zyxel.com/dk/da/
1-a
1-b
1-a
1-b
OR
1/2
1 Hardware Installation
DX3101-B0
DSL
1-a
WAN
1-b
Connect the DSL port directly to the telephone socket on the wall (1-a) using an appropriate DSL cable (not included).OR Use an Ethernet cable to connect the WAN port to the ONT box on the wall (1-b).Connect a phone to the phone port using a phone cable (optional).Connect a computer to the LAN port using the Ethernet cable (optional).Connect the power cable to the Zyxel Device and press the power button .
Verbinden Sie den DSL-Anschluss über ein entsprechendes DSL-Kabel (nicht im Lieferum-fang enthalten) direkt mit der Telefondose an der Wand (1-a).ODER Verbinden Sie den WAN-Anschluss mit der ONT-Box an der Wand (1-b). Verwenden Sie dazu ein Ethernet-Kabel.Schließen Sie ein Telefon mit dem Telefonkabel an den Telefonanschluss an (optional).Schließen Sie einen Computer mit dem Ethernet-Kabel an den LAN-Port an (optional).Schließen Sie das Netzkabel an das Modem an und drücken Sie auf die Ein/Aus-Taste.
32
4
234
EN
DE
Quick Start GuideKurzanleitungENGLISH | DEUTSCH
VDSL2 35b 2+2 11ac Dual Band Concurrent IAD Zyxel DeviceDX3101
Support InformationEUhttps://support.zyxel.eu
Copper Connection / Kupferanschluss Fiber Connection / Glasfaseranschluss
(Optional) (Optional)
OR
LANPHONE1
POWER ON
POWER
42 3
Phone Socket / Telefondose ONT Box / Glasfasermodem
Power
On - Internet is connected.Blinking - Sending or receiving data through default gateway.On - Failed to get IP address.One Blink - PPP authentication failed.Off - No connection.
Green
Red
---
---
On - LAN is connected.Blinking - Sending or receiving data.
Off - No connection.
Green
---
On - WiFi is ready.Blinking - Establishing WPS connection.
Blinking - No connection.
Off - WiFi is disabled, or link is down.
Green
Amber
---
On - SIP account is registered and VoIP is ready.Blinking - Incoming VoIP call, or phone is off the hook.
Off - SIP account not working, or no VoIP network connection.
Off - VoIP disabled, or no SIP account is registered to the phone port .
Green
Amber
---
On - Device is ready.Blinking (Slow) - Starting up.Blinking (Fast) - Upgrading firmware.
Green
Red On - Device error.Off - Power is off.
On - DSL or WAN Ethernet port is connected.Blinking (Slow) - Detecting DSL carrier signal.Blinking (Fast) - Establishing DSL connection.
Green
Internet
LAN
2.4G/5G
Phone
Off - DSL port not active or WANoE modem not connected.WAN
LAN
Power
AN - Datenübertragung über den ausgewählten Port aktiv.Blinkend - Datenübertragung aktiv.
An - PPP-Authentifizierung fehlgeschlagen.1 x blinkend - Authentifizierung fehlgeschlagen.
Aus - keine Internetverbindung.
Grün
Rot
---
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.
Aus - Kein Gerät am LAN-Port angeschlossen.
Grün
---
An - Gerät betriebsbereit.langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.
Grün
Rot An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Aus - DSL Schnittstelle nicht aktiviert bzw. kein WANoE-Modem angeschlossen.---
An - DSL- oder WANoE-Verbindung ist hergestellt.langsam blinkend - DSL- Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.
Grün
Internet
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.
Blinkend - WPS aktiv, Client kann verbunden werden.
Aus - WLAN ist ausgeschaltet.
Grün
Orange
---
An - Alle Telefonnummern angemeldet, Internettelefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.
An - Rufnummer-Anmeldung nicht erfolgreich, z.B. falsche Zugangsdaten.
Aus - Internet-Telefonie nicht aktiviert.
Grün
Orange
---
2.4G/5G
Phone
WAN
Grün
--
An - DSL-Verbindung ist hergestellt.Langsam blinkend - DSL-Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.Aus - DSL-Schnittstelle nicht aktiviert.
Package Contents / Inhalt
Power Adapter
Netztteil
Ethernet Cable
Ethernetkabel
Quick Start Guide
Kurzanleitung
DoC
Declaration of Conformity
Safety Warnings
CE-ErklärungSicherheitshinweise
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.https://www.zyxel.com/dk/da/
1-a
1-b
1-a
1-b
OR
1/2
1 Hardware Installation
DX3101-B0
DSL
1-a
WAN
1-b
Connect the DSL port directly to the telephone socket on the wall (1-a) using an appropriate DSL cable (not included).OR Use an Ethernet cable to connect the WAN port to the ONT box on the wall (1-b).Connect a phone to the phone port using a phone cable (optional).Connect a computer to the LAN port using the Ethernet cable (optional).Connect the power cable to the Zyxel Device and press the power button .
Verbinden Sie den DSL-Anschluss über ein entsprechendes DSL-Kabel (nicht im Lieferum-fang enthalten) direkt mit der Telefondose an der Wand (1-a).ODER Verbinden Sie den WAN-Anschluss mit der ONT-Box an der Wand (1-b). Verwenden Sie dazu ein Ethernet-Kabel.Schließen Sie ein Telefon mit dem Telefonkabel an den Telefonanschluss an (optional).Schließen Sie einen Computer mit dem Ethernet-Kabel an den LAN-Port an (optional).Schließen Sie das Netzkabel an das Modem an und drücken Sie auf die Ein/Aus-Taste.
32
4
234
EN
DE
Quick Start GuideKurzanleitungENGLISH | DEUTSCH
VDSL2 35b 2+2 11ac Dual Band Concurrent IAD Zyxel DeviceDX3101
Support InformationEUhttps://support.zyxel.eu
Copper Connection / Kupferanschluss Fiber Connection / Glasfaseranschluss
(Optional) (Optional)
OR
LANPHONE1
POWER ON
POWER
42 3
Phone Socket / Telefondose ONT Box / Glasfasermodem
Power
On - Internet is connected.Blinking - Sending or receiving data through default gateway.On - Failed to get IP address.One Blink - PPP authentication failed.Off - No connection.
Green
Red
---
---
On - LAN is connected.Blinking - Sending or receiving data.
Off - No connection.
Green
---
On - WiFi is ready.Blinking - Establishing WPS connection.
Blinking - No connection.
Off - WiFi is disabled, or link is down.
Green
Amber
---
On - SIP account is registered and VoIP is ready.Blinking - Incoming VoIP call, or phone is off the hook.
Off - SIP account not working, or no VoIP network connection.
Off - VoIP disabled, or no SIP account is registered to the phone port .
Green
Amber
---
On - Device is ready.Blinking (Slow) - Starting up.Blinking (Fast) - Upgrading firmware.
Green
Red On - Device error.Off - Power is off.
On - DSL or WAN Ethernet port is connected.Blinking (Slow) - Detecting DSL carrier signal.Blinking (Fast) - Establishing DSL connection.
Green
Internet
LAN
2.4G/5G
Phone
Off - DSL port not active or WANoE modem not connected.WAN
LAN
Power
AN - Datenübertragung über den ausgewählten Port aktiv.Blinkend - Datenübertragung aktiv.
An - PPP-Authentifizierung fehlgeschlagen.1 x blinkend - Authentifizierung fehlgeschlagen.
Aus - keine Internetverbindung.
Grün
Rot
---
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.
Aus - Kein Gerät am LAN-Port angeschlossen.
Grün
---
An - Gerät betriebsbereit.langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.
Grün
Rot An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Aus - DSL Schnittstelle nicht aktiviert bzw. kein WANoE-Modem angeschlossen.---
An - DSL- oder WANoE-Verbindung ist hergestellt.langsam blinkend - DSL- Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.
Grün
Internet
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.
Blinkend - WPS aktiv, Client kann verbunden werden.
Aus - WLAN ist ausgeschaltet.
Grün
Orange
---
An - Alle Telefonnummern angemeldet, Internettelefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.
An - Rufnummer-Anmeldung nicht erfolgreich, z.B. falsche Zugangsdaten.
Aus - Internet-Telefonie nicht aktiviert.
Grün
Orange
---
2.4G/5G
Phone
WAN
Grün
Rot--
An - Datenübertragung aktiv.Blinkend - Datenübertragung aktiv.An oder blinkend – Authentifizierung fehlgeschlagen.Aus - Internetverbindung nicht aktiv.
Package Contents / Inhalt
Power Adapter
Netztteil
Ethernet Cable
Ethernetkabel
Quick Start Guide
Kurzanleitung
DoC
Declaration of Conformity
Safety Warnings
CE-ErklärungSicherheitshinweise
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.https://www.zyxel.com/dk/da/
1-a
1-b
1-a
1-b
OR
1/2
1 Hardware Installation
DX3101-B0
DSL
1-a
WAN
1-b
Connect the DSL port directly to the telephone socket on the wall (1-a) using an appropriate DSL cable (not included).OR Use an Ethernet cable to connect the WAN port to the ONT box on the wall (1-b).Connect a phone to the phone port using a phone cable (optional).Connect a computer to the LAN port using the Ethernet cable (optional).Connect the power cable to the Zyxel Device and press the power button .
Verbinden Sie den DSL-Anschluss über ein entsprechendes DSL-Kabel (nicht im Lieferum-fang enthalten) direkt mit der Telefondose an der Wand (1-a).ODER Verbinden Sie den WAN-Anschluss mit der ONT-Box an der Wand (1-b). Verwenden Sie dazu ein Ethernet-Kabel.Schließen Sie ein Telefon mit dem Telefonkabel an den Telefonanschluss an (optional).Schließen Sie einen Computer mit dem Ethernet-Kabel an den LAN-Port an (optional).Schließen Sie das Netzkabel an das Modem an und drücken Sie auf die Ein/Aus-Taste.
32
4
234
EN
DE
Quick Start GuideKurzanleitungENGLISH | DEUTSCH
VDSL2 35b 2+2 11ac Dual Band Concurrent IAD Zyxel DeviceDX3101
Support InformationEUhttps://support.zyxel.eu
Copper Connection / Kupferanschluss Fiber Connection / Glasfaseranschluss
(Optional) (Optional)
OR
LANPHONE1
POWER ON
POWER
42 3
Phone Socket / Telefondose ONT Box / Glasfasermodem
Power
On - Internet is connected.Blinking - Sending or receiving data through default gateway.On - Failed to get IP address.One Blink - PPP authentication failed.Off - No connection.
Green
Red
---
---
On - LAN is connected.Blinking - Sending or receiving data.
Off - No connection.
Green
---
On - WiFi is ready.Blinking - Establishing WPS connection.
Blinking - No connection.
Off - WiFi is disabled, or link is down.
Green
Amber
---
On - SIP account is registered and VoIP is ready.Blinking - Incoming VoIP call, or phone is off the hook.
Off - SIP account not working, or no VoIP network connection.
Off - VoIP disabled, or no SIP account is registered to the phone port .
Green
Amber
---
On - Device is ready.Blinking (Slow) - Starting up.Blinking (Fast) - Upgrading firmware.
Green
Red On - Device error.Off - Power is off.
On - DSL or WAN Ethernet port is connected.Blinking (Slow) - Detecting DSL carrier signal.Blinking (Fast) - Establishing DSL connection.
Green
Internet
LAN
2.4G/5G
Phone
Off - DSL port not active or WANoE modem not connected.WAN
LAN
Power
AN - Datenübertragung über den ausgewählten Port aktiv.Blinkend - Datenübertragung aktiv.
An - PPP-Authentifizierung fehlgeschlagen.1 x blinkend - Authentifizierung fehlgeschlagen.
Aus - keine Internetverbindung.
Grün
Rot
---
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.
Aus - Kein Gerät am LAN-Port angeschlossen.
Grün
---
An - Gerät betriebsbereit.langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.
Grün
Rot An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Aus - DSL Schnittstelle nicht aktiviert bzw. kein WANoE-Modem angeschlossen.---
An - DSL- oder WANoE-Verbindung ist hergestellt.langsam blinkend - DSL- Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.
Grün
Internet
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.
Blinkend - WPS aktiv, Client kann verbunden werden.
Aus - WLAN ist ausgeschaltet.
Grün
Orange
---
An - Alle Telefonnummern angemeldet, Internettelefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.
An - Rufnummer-Anmeldung nicht erfolgreich, z.B. falsche Zugangsdaten.
Aus - Internet-Telefonie nicht aktiviert.
Grün
Orange
---
2.4G/5G
Phone
WAN
Grün
--
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.Aus - Kein Gerät am LAN-Port angeschlossen.
Package Contents / Inhalt
Power Adapter
Netztteil
Ethernet Cable
Ethernetkabel
Quick Start Guide
Kurzanleitung
DoC
Declaration of Conformity
Safety Warnings
CE-ErklärungSicherheitshinweise
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.https://www.zyxel.com/dk/da/
1-a
1-b
1-a
1-b
OR
1/2
1 Hardware Installation
DX3101-B0
DSL
1-a
WAN
1-b
Connect the DSL port directly to the telephone socket on the wall (1-a) using an appropriate DSL cable (not included).OR Use an Ethernet cable to connect the WAN port to the ONT box on the wall (1-b).Connect a phone to the phone port using a phone cable (optional).Connect a computer to the LAN port using the Ethernet cable (optional).Connect the power cable to the Zyxel Device and press the power button .
Verbinden Sie den DSL-Anschluss über ein entsprechendes DSL-Kabel (nicht im Lieferum-fang enthalten) direkt mit der Telefondose an der Wand (1-a).ODER Verbinden Sie den WAN-Anschluss mit der ONT-Box an der Wand (1-b). Verwenden Sie dazu ein Ethernet-Kabel.Schließen Sie ein Telefon mit dem Telefonkabel an den Telefonanschluss an (optional).Schließen Sie einen Computer mit dem Ethernet-Kabel an den LAN-Port an (optional).Schließen Sie das Netzkabel an das Modem an und drücken Sie auf die Ein/Aus-Taste.
32
4
234
EN
DE
Quick Start GuideKurzanleitungENGLISH | DEUTSCH
VDSL2 35b 2+2 11ac Dual Band Concurrent IAD Zyxel DeviceDX3101
Support InformationEUhttps://support.zyxel.eu
Copper Connection / Kupferanschluss Fiber Connection / Glasfaseranschluss
(Optional) (Optional)
OR
LANPHONE1
POWER ON
POWER
42 3
Phone Socket / Telefondose ONT Box / Glasfasermodem
Power
On - Internet is connected.Blinking - Sending or receiving data through default gateway.On - Failed to get IP address.One Blink - PPP authentication failed.Off - No connection.
Green
Red
---
---
On - LAN is connected.Blinking - Sending or receiving data.
Off - No connection.
Green
---
On - WiFi is ready.Blinking - Establishing WPS connection.
Blinking - No connection.
Off - WiFi is disabled, or link is down.
Green
Amber
---
On - SIP account is registered and VoIP is ready.Blinking - Incoming VoIP call, or phone is off the hook.
Off - SIP account not working, or no VoIP network connection.
Off - VoIP disabled, or no SIP account is registered to the phone port .
Green
Amber
---
On - Device is ready.Blinking (Slow) - Starting up.Blinking (Fast) - Upgrading firmware.
Green
Red On - Device error.Off - Power is off.
On - DSL or WAN Ethernet port is connected.Blinking (Slow) - Detecting DSL carrier signal.Blinking (Fast) - Establishing DSL connection.
Green
Internet
LAN
2.4G/5G
Phone
Off - DSL port not active or WANoE modem not connected.WAN
LAN
Power
AN - Datenübertragung über den ausgewählten Port aktiv.Blinkend - Datenübertragung aktiv.
An - PPP-Authentifizierung fehlgeschlagen.1 x blinkend - Authentifizierung fehlgeschlagen.
Aus - keine Internetverbindung.
Grün
Rot
---
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.
Aus - Kein Gerät am LAN-Port angeschlossen.
Grün
---
An - Gerät betriebsbereit.langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.
Grün
Rot An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Aus - DSL Schnittstelle nicht aktiviert bzw. kein WANoE-Modem angeschlossen.---
An - DSL- oder WANoE-Verbindung ist hergestellt.langsam blinkend - DSL- Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.
Grün
Internet
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.
Blinkend - WPS aktiv, Client kann verbunden werden.
Aus - WLAN ist ausgeschaltet.
Grün
Orange
---
An - Alle Telefonnummern angemeldet, Internettelefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.
An - Rufnummer-Anmeldung nicht erfolgreich, z.B. falsche Zugangsdaten.
Aus - Internet-Telefonie nicht aktiviert.
Grün
Orange
---
2.4G/5G
Phone
WAN
Grün
Orange--
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.Blinkend - WPS aktiv, Client kann verbunden werden.Aus - WLAN ist ausgeschaltet.
Package Contents / Inhalt
Power Adapter
Netztteil
Ethernet Cable
Ethernetkabel
Quick Start Guide
Kurzanleitung
DoC
Declaration of Conformity
Safety Warnings
CE-ErklärungSicherheitshinweise
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.https://www.zyxel.com/dk/da/
1-a
1-b
1-a
1-b
OR
1/2
1 Hardware Installation
DX3101-B0
DSL
1-a
WAN
1-b
Connect the DSL port directly to the telephone socket on the wall (1-a) using an appropriate DSL cable (not included).OR Use an Ethernet cable to connect the WAN port to the ONT box on the wall (1-b).Connect a phone to the phone port using a phone cable (optional).Connect a computer to the LAN port using the Ethernet cable (optional).Connect the power cable to the Zyxel Device and press the power button .
Verbinden Sie den DSL-Anschluss über ein entsprechendes DSL-Kabel (nicht im Lieferum-fang enthalten) direkt mit der Telefondose an der Wand (1-a).ODER Verbinden Sie den WAN-Anschluss mit der ONT-Box an der Wand (1-b). Verwenden Sie dazu ein Ethernet-Kabel.Schließen Sie ein Telefon mit dem Telefonkabel an den Telefonanschluss an (optional).Schließen Sie einen Computer mit dem Ethernet-Kabel an den LAN-Port an (optional).Schließen Sie das Netzkabel an das Modem an und drücken Sie auf die Ein/Aus-Taste.
32
4
234
EN
DE
Quick Start GuideKurzanleitungENGLISH | DEUTSCH
VDSL2 35b 2+2 11ac Dual Band Concurrent IAD Zyxel DeviceDX3101
Support InformationEUhttps://support.zyxel.eu
Copper Connection / Kupferanschluss Fiber Connection / Glasfaseranschluss
(Optional) (Optional)
OR
LANPHONE1
POWER ON
POWER
42 3
Phone Socket / Telefondose ONT Box / Glasfasermodem
Power
On - Internet is connected.Blinking - Sending or receiving data through default gateway.On - Failed to get IP address.One Blink - PPP authentication failed.Off - No connection.
Green
Red
---
---
On - LAN is connected.Blinking - Sending or receiving data.
Off - No connection.
Green
---
On - WiFi is ready.Blinking - Establishing WPS connection.
Blinking - No connection.
Off - WiFi is disabled, or link is down.
Green
Amber
---
On - SIP account is registered and VoIP is ready.Blinking - Incoming VoIP call, or phone is off the hook.
Off - SIP account not working, or no VoIP network connection.
Off - VoIP disabled, or no SIP account is registered to the phone port .
Green
Amber
---
On - Device is ready.Blinking (Slow) - Starting up.Blinking (Fast) - Upgrading firmware.
Green
Red On - Device error.Off - Power is off.
On - DSL or WAN Ethernet port is connected.Blinking (Slow) - Detecting DSL carrier signal.Blinking (Fast) - Establishing DSL connection.
Green
Internet
LAN
2.4G/5G
Phone
Off - DSL port not active or WANoE modem not connected.WAN
LAN
Power
AN - Datenübertragung über den ausgewählten Port aktiv.Blinkend - Datenübertragung aktiv.
An - PPP-Authentifizierung fehlgeschlagen.1 x blinkend - Authentifizierung fehlgeschlagen.
Aus - keine Internetverbindung.
Grün
Rot
---
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.
Aus - Kein Gerät am LAN-Port angeschlossen.
Grün
---
An - Gerät betriebsbereit.langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.
Grün
Rot An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Aus - DSL Schnittstelle nicht aktiviert bzw. kein WANoE-Modem angeschlossen.---
An - DSL- oder WANoE-Verbindung ist hergestellt.langsam blinkend - DSL- Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.
Grün
Internet
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.
Blinkend - WPS aktiv, Client kann verbunden werden.
Aus - WLAN ist ausgeschaltet.
Grün
Orange
---
An - Alle Telefonnummern angemeldet, Internettelefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.
An - Rufnummer-Anmeldung nicht erfolgreich, z.B. falsche Zugangsdaten.
Aus - Internet-Telefonie nicht aktiviert.
Grün
Orange
---
2.4G/5G
Phone
WAN
Grün
Orange
--
An - Telefonnummer angemeldet, Telefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.An - Rufnummer-Anmeldung nicht erfolgreich,z.B. falsche Zugangsdaten.Aus - Telefonie nicht aktiviert.
1
130.8m
m
2
x2
x2 15
3.89~3.98
2.1-2.3
6.8~7.1
Unit: mm
Wall Mount Screw
1
2
3
1
2
3
EN
DE
Drill two holes on the wall at the distance of 130.8mm.
Insert screw anchors and screws (not provided) into the holes.
Place the DX3101-B0 so the wall mount holes line up with the screws. Slide the DX3101-B0 down gently to fix it into place.
Bohren Sie zwei Löcher im Abstand von 130.8mm in die Wand.
Schieben Sie Dübel in die Löcher und schrauben Sie jeweils eine Schraube hinein (nicht im Lieferumfang enthalten).
Stellen Sie das DX3101-B0 so auf, dass die Bohrungen für die Wandmontage mit den Schrauben übereinstimmen. Schieben Sie das DX3101-B0 vorsichtig nach unten, um es zu fixieren.
(Optional)
(Optional)
4 Wall Mounting / Wandbefestigung (Optional)
2/2
Schnellstart-Assistent
Lassen Sie uns starten.
1Zeitzone
2Internet
3WiFi
Benutzername
PasswortXXXXXXXXXX
admin
Login
Login
10.0.0.138
6
6
DE
Open a web browser and go to http://10.0.0.138. Enter the default User name (admin) and admin Login Password (on the device label), and then click Login. The wizard runs. Follow the wizard prompts to complete the setup.
Öffnen Sie einen Webbrowser, und rufen Sie http://10.0.0.138 auf. Geben Sie den GUI Benutzernamen (admin) und das GUI Passwort für admin (auf dem Etikett des Geräts) ein und klicken Sie anschließend auf Login. Ein Assistent wird ausgeführt. Folgen Sie den Anweisungen des Assistenten.
5-a
5-b
5-c
EN
EN
5-a
5-b
5-c
DE
Use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.
Scan the QR code on the device label then follow the prompts to connect to the WLAN on your mobile device.
Press the WPS button until the WPS LEDs blinks amber. Press the WPS button on the client. If the WPS method fails, use the manual method (5-a).
Der WLAN Name und der WLAN-Schlüssel befinden sich auf dem Etikett am Gerät. Suchen Sie diesen WLAN Namen auf Ihrem Smartphone oder Notebook. Geben Sie den WLAN-Schlüssel für die WLAN-Verbindung ein.
Scannen Sie den QR-Code auf dem Geräteetikett und befolgen Sie die Anweisungen, um eine Verbindung zum WLAN auf Ihrem Mobilgerät herzustellen.
2 WiFi Connection / WLAN-Verbindung
3 Quick Start Wizard / Installationsassistent
WiFi
A1_XXXXXX
Connect
within
2 minutes
More than 1 second
6
WLAN Name
WLAN Passwort
A1_XXXXXX
XXXXXXXXXX
OR
10.0.0.138
3
WLAN Name: A1_XXXXXXWLAN Passwort: XXXXXXXXXXGUI Login: 10.0.0.138GUI Benutzername: adminGUI Passwort: XXXXXXXXXX
Typschild
5-a 5-b
5-c
Drücken Sie auf die WPS-Taste, bis die WPS LED orange blinkt. Drücken Sie die WPS Taste
am Client-Gerät. Wenn die WPS Einrichtung fehlschlägt, benutzen Sie bitte die manuelle
Einrichtung (5-a).
WPSON
Package Contents / Inhalt
Power Adapter
Netztteil
Ethernet Cable
Ethernetkabel
Quick Start Guide
Kurzanleitung
DoC
Declaration of Conformity
Safety Warnings
CE-ErklärungSicherheitshinweise
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.https://www.zyxel.com/dk/da/
1-a
1-b
1-a
1-b
OR
1/2
1 Hardware Installation
DX3101-B0
DSL
1-a
WAN
1-b
Connect the DSL port directly to the telephone socket on the wall (1-a) using an appropriate DSL cable (not included).OR Use an Ethernet cable to connect the WAN port to the ONT box on the wall (1-b).Connect a phone to the phone port using a phone cable (optional).Connect a computer to the LAN port using the Ethernet cable (optional).Connect the power cable to the Zyxel Device and press the power button .
Verbinden Sie den DSL-Anschluss über ein entsprechendes DSL-Kabel (nicht im Lieferum-fang enthalten) direkt mit der Telefondose an der Wand (1-a).ODER Verbinden Sie den WAN-Anschluss mit der ONT-Box an der Wand (1-b). Verwenden Sie dazu ein Ethernet-Kabel.Schließen Sie ein Telefon mit dem Telefonkabel an den Telefonanschluss an (optional).Schließen Sie einen Computer mit dem Ethernet-Kabel an den LAN-Port an (optional).Schließen Sie das Netzkabel an das Modem an und drücken Sie auf die Ein/Aus-Taste.
32
4
234
EN
DE
Quick Start GuideKurzanleitungENGLISH | DEUTSCH
VDSL2 35b 2+2 11ac Dual Band Concurrent IAD Zyxel DeviceDX3101
Support InformationEUhttps://support.zyxel.eu
Copper Connection / Kupferanschluss Fiber Connection / Glasfaseranschluss
(Optional) (Optional)
OR
LANPHONE1
POWER ON
POWER
42 3
Phone Socket / Telefondose ONT Box / Glasfasermodem
Power
On - Internet is connected.Blinking - Sending or receiving data through default gateway.On - Failed to get IP address.One Blink - PPP authentication failed.Off - No connection.
Green
Red
---
---
On - LAN is connected.Blinking - Sending or receiving data.
Off - No connection.
Green
---
On - WiFi is ready.Blinking - Establishing WPS connection.
Blinking - No connection.
Off - WiFi is disabled, or link is down.
Green
Amber
---
On - SIP account is registered and VoIP is ready.Blinking - Incoming VoIP call, or phone is off the hook.
Off - SIP account not working, or no VoIP network connection.
Off - VoIP disabled, or no SIP account is registered to the phone port .
Green
Amber
---
On - Device is ready.Blinking (Slow) - Starting up.Blinking (Fast) - Upgrading firmware.
Green
Red On - Device error.Off - Power is off.
On - DSL or WAN Ethernet port is connected.Blinking (Slow) - Detecting DSL carrier signal.Blinking (Fast) - Establishing DSL connection.
Green
Internet
LAN
2.4G/5G
Phone
Off - DSL port not active or WANoE modem not connected.WAN
LAN
Power
AN - Datenübertragung über den ausgewählten Port aktiv.Blinkend - Datenübertragung aktiv.
An - PPP-Authentifizierung fehlgeschlagen.1 x blinkend - Authentifizierung fehlgeschlagen.
Aus - keine Internetverbindung.
Grün
Rot
---
An - LAN-Port aktiv.Blinkend - Datenübertragung aktiv.
Aus - Kein Gerät am LAN-Port angeschlossen.
Grün
---
An - Gerät betriebsbereit.langsam blinkend - Gerät startet.Schnell blinkend - Firmware wird aktualisiert.
Grün
Rot An - Gerätefehler.Aus - Keine Stromversorgung vorhanden.
Aus - DSL Schnittstelle nicht aktiviert bzw. kein WANoE-Modem angeschlossen.---
An - DSL- oder WANoE-Verbindung ist hergestellt.langsam blinkend - DSL- Synchronisation wird durchgeführt.Schnell blinkend - DSL-Verbindung wird aufgebaut.
Grün
Internet
An - WLAN ist eingeschaltet.Blinkend - Datenübertragung aktiv.
Blinkend - WPS aktiv, Client kann verbunden werden.
Aus - WLAN ist ausgeschaltet.
Grün
Orange
---
An - Alle Telefonnummern angemeldet, Internettelefonie bereit.Blinkend - Eingehender Ruf oder Gesprächsaufbau.
An - Rufnummer-Anmeldung nicht erfolgreich, z.B. falsche Zugangsdaten.
Aus - Internet-Telefonie nicht aktiviert.
Grün
Orange
---
2.4G/5G
Phone
WAN
1. Verbinden Sie die A1 WLAN Box mit der Telefondose.
Stecken Sie dazu das Y-Kabel Y direkt an die Telefondose und verbinden Sie den grauen Stecker mit der DSL Buchse und den grünen Stecker mit der grünen Telefon-Buchse.
2. Schließen Sie die A1 WLAN Box mit dem beigelegten Stromkabel S an die Stromversorgung an und warten Sie ungefähr 5 Minuten. Achten Sie darauf, dass der ON/OFF Knopf auf der Rückseite auf der korrekten Position ist. Während die A1 WLAN Box startet, blinken die LEDs.
3. Jetzt leuchten mindestens diese LEDs grün: L . L
4. Sie haben die Installation abgeschlossen und können sich per WLAN oder LAN mit der A1 WLAN Box verbinden
Fahren Sie mit Schritt 2 WLAN-Verbindung fort.
Variante BSie haben bereits Internet für zuhause von A1.Weiter mit der Variante B auf der rechten Seite.
Variante ASie haben noch kein Internet
für zuhause von A1. Weiter mit der Variante A auf der linken Seite.
Geräte mit dem WLAN verbinden
A1 WLAN Box startklar machen
10 min 15 minVariante A Variante B
Schritt 1 Installation
Schritt 2 WLAN-Verbindung
Installationsanleitung
Viel Spaß mit Ihrem A1 Internet!
A B
1. Stecken Sie alle Kabel, außer das Stromkabel, von der bestehenden A1 WLAN Box ab und schließen Sie diese an die neue A1 WLAN Box an.
2. Schließen Sie die A1 WLAN Box mit dem beigelegtem Stromkabel S an die Stromversorgung an und warten Sie ungefähr 5 Minuten.
Während die A1 WLAN Box startet, blinken die LEDs.
3. Jetzt leuchten mindestens diese LEDs grün L :
L
4. Wenn Sie auch A1 Festnetztelefonie nutzen, fahren Sie mit diesem Punkt fort. Ansonsten weiter mit Punkt 5. Tätigen Sie einen Anruf, war dieser erfolgreich?
5. Sie haben die Installation abgeschlossen und können sich per WLAN oder LAN mit der A1 WLAN Box verbinden.
Fahren Sie mit Schritt 2 WLAN-Verbindung fort.
Eine ausführliche Beschreibung der LEDs finden Sie auf der Rückseite.
1
130.8m
m
2
x2
x2 15
3.89~3.98
2.1-2.3
6.8~7.1
Unit: mm
Wall Mount Screw
1
2
3
1
2
3
EN
DE
Drill two holes on the wall at the distance of 130.8mm.
Insert screw anchors and screws (not provided) into the holes.
Place the DX3101-B0 so the wall mount holes line up with the screws. Slide the DX3101-B0 down gently to fix it into place.
Bohren Sie zwei Löcher im Abstand von 130.8mm in die Wand.
Schieben Sie Dübel in die Löcher und schrauben Sie jeweils eine Schraube hinein (nicht im Lieferumfang enthalten).
Stellen Sie das DX3101-B0 so auf, dass die Bohrungen für die Wandmontage mit den Schrauben übereinstimmen. Schieben Sie das DX3101-B0 vorsichtig nach unten, um es zu fixieren.
(Optional)
(Optional)
4 Wall Mounting / Wandbefestigung (Optional)
2/2
Schnellstart-Assistent
Lassen Sie uns starten.
1Zeitzone
2Internet
3WiFi
Benutzername
PasswortXXXXXXXXXX
admin
Login
Login
10.0.0.138
6
6
DE
Open a web browser and go to http://10.0.0.138. Enter the default User name (admin) and admin Login Password (on the device label), and then click Login. The wizard runs. Follow the wizard prompts to complete the setup.
Öffnen Sie einen Webbrowser, und rufen Sie http://10.0.0.138 auf. Geben Sie den GUI Benutzernamen (admin) und das GUI Passwort für admin (auf dem Etikett des Geräts) ein und klicken Sie anschließend auf Login. Ein Assistent wird ausgeführt. Folgen Sie den Anweisungen des Assistenten.
5-a
5-b
5-c
EN
EN
5-a
5-b
5-c
DE
Use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.
Scan the QR code on the device label then follow the prompts to connect to the WLAN on your mobile device.
Press the WPS button until the WPS LEDs blinks amber. Press the WPS button on the client. If the WPS method fails, use the manual method (5-a).
Der WLAN Name und der WLAN-Schlüssel befinden sich auf dem Etikett am Gerät. Suchen Sie diesen WLAN Namen auf Ihrem Smartphone oder Notebook. Geben Sie den WLAN-Schlüssel für die WLAN-Verbindung ein.
Scannen Sie den QR-Code auf dem Geräteetikett und befolgen Sie die Anweisungen, um eine Verbindung zum WLAN auf Ihrem Mobilgerät herzustellen.
2 WiFi Connection / WLAN-Verbindung
3 Quick Start Wizard / Installationsassistent
WiFi
A1_XXXXXX
Connect
within
2 minutes
More than 1 second
6
WLAN Name
WLAN Passwort
A1_XXXXXX
XXXXXXXXXX
OR
10.0.0.138
3
WLAN Name: A1_XXXXXXWLAN Passwort: XXXXXXXXXXGUI Login: 10.0.0.138GUI Benutzername: adminGUI Passwort: XXXXXXXXXX
Typschild
5-a 5-b
5-c
Drücken Sie auf die WPS-Taste, bis die WPS LED orange blinkt. Drücken Sie die WPS Taste
am Client-Gerät. Wenn die WPS Einrichtung fehlschlägt, benutzen Sie bitte die manuelle
Einrichtung (5-a).
WPSON
1. Lesen Sie an der Rückseite Ihrer A1 WLAN Box den WLAN Namen N Ihres Netzwerkes und Ihr WLAN Passwort P ab.
2. Wählen Sie auf Ihrem Computer, Tablet oder Smartphone Ihren WLAN Namen N und geben Sie Ihr WLAN Passwort P ein.
3. Sie haben die WLAN-Verbindung eingerichtet und können Ihre A1 WLAN Box jetzt nutzen.
1
130.8m
m
2
x2
x2 15
3.89~3.98
2.1-2.3
6.8~7.1
Unit: mm
Wall Mount Screw
1
2
3
1
2
3
EN
DE
Drill two holes on the wall at the distance of 130.8mm.
Insert screw anchors and screws (not provided) into the holes.
Place the DX3101-B0 so the wall mount holes line up with the screws. Slide the DX3101-B0 down gently to fix it into place.
Bohren Sie zwei Löcher im Abstand von 130.8mm in die Wand.
Schieben Sie Dübel in die Löcher und schrauben Sie jeweils eine Schraube hinein (nicht im Lieferumfang enthalten).
Stellen Sie das DX3101-B0 so auf, dass die Bohrungen für die Wandmontage mit den Schrauben übereinstimmen. Schieben Sie das DX3101-B0 vorsichtig nach unten, um es zu fixieren.
(Optional)
(Optional)
4 Wall Mounting / Wandbefestigung (Optional)
2/2
Schnellstart-Assistent
Lassen Sie uns starten.
1Zeitzone
2Internet
3WiFi
Benutzername
PasswortXXXXXXXXXX
admin
Login
Login
10.0.0.138
6
6
DE
Open a web browser and go to http://10.0.0.138. Enter the default User name (admin) and admin Login Password (on the device label), and then click Login. The wizard runs. Follow the wizard prompts to complete the setup.
Öffnen Sie einen Webbrowser, und rufen Sie http://10.0.0.138 auf. Geben Sie den GUI Benutzernamen (admin) und das GUI Passwort für admin (auf dem Etikett des Geräts) ein und klicken Sie anschließend auf Login. Ein Assistent wird ausgeführt. Folgen Sie den Anweisungen des Assistenten.
5-a
5-b
5-c
EN
EN
5-a
5-b
5-c
DE
Use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.
Scan the QR code on the device label then follow the prompts to connect to the WLAN on your mobile device.
Press the WPS button until the WPS LEDs blinks amber. Press the WPS button on the client. If the WPS method fails, use the manual method (5-a).
Der WLAN Name und der WLAN-Schlüssel befinden sich auf dem Etikett am Gerät. Suchen Sie diesen WLAN Namen auf Ihrem Smartphone oder Notebook. Geben Sie den WLAN-Schlüssel für die WLAN-Verbindung ein.
Scannen Sie den QR-Code auf dem Geräteetikett und befolgen Sie die Anweisungen, um eine Verbindung zum WLAN auf Ihrem Mobilgerät herzustellen.
2 WiFi Connection / WLAN-Verbindung
3 Quick Start Wizard / Installationsassistent
WiFi
A1_XXXXXX
Connect
within
2 minutes
More than 1 second
6
WLAN Name
WLAN Passwort
A1_XXXXXX
XXXXXXXXXX
OR
10.0.0.138
3
WLAN Name: A1_XXXXXXWLAN Passwort: XXXXXXXXXXGUI Login: 10.0.0.138GUI Benutzername: adminGUI Passwort: XXXXXXXXXX
Typschild
5-a 5-b
5-c
Drücken Sie auf die WPS-Taste, bis die WPS LED orange blinkt. Drücken Sie die WPS Taste
am Client-Gerät. Wenn die WPS Einrichtung fehlschlägt, benutzen Sie bitte die manuelle
Einrichtung (5-a).
WPSON
NP
WLAN-Karte
WLAN Name: A1_XXXXXXWLAN Passwort: XXXXXXXXXXWeb GUI: 10.0.0.138GUI Benutzername: adminGUI Passwort: XXXXXXXXXX
Eine ausführliche Beschreibung der LEDs finden Sie auf der Rückseite.
1
130.8m
m
2
x2
x2 15
3.89~3.98
2.1-2.3
6.8~7.1
Unit: mm
Wall Mount Screw
1
2
3
1
2
3
EN
DE
Drill two holes on the wall at the distance of 130.8mm.
Insert screw anchors and screws (not provided) into the holes.
Place the DX3101-B0 so the wall mount holes line up with the screws. Slide the DX3101-B0 down gently to fix it into place.
Bohren Sie zwei Löcher im Abstand von 130.8mm in die Wand.
Schieben Sie Dübel in die Löcher und schrauben Sie jeweils eine Schraube hinein (nicht im Lieferumfang enthalten).
Stellen Sie das DX3101-B0 so auf, dass die Bohrungen für die Wandmontage mit den Schrauben übereinstimmen. Schieben Sie das DX3101-B0 vorsichtig nach unten, um es zu fixieren.
(Optional)
(Optional)
4 Wall Mounting / Wandbefestigung (Optional)
2/2
Schnellstart-Assistent
Lassen Sie uns starten.
1Zeitzone
2Internet
3WiFi
Benutzername
PasswortXXXXXXXXXX
admin
Login
Login
10.0.0.138
6
6
DE
Open a web browser and go to http://10.0.0.138. Enter the default User name (admin) and admin Login Password (on the device label), and then click Login. The wizard runs. Follow the wizard prompts to complete the setup.
Öffnen Sie einen Webbrowser, und rufen Sie http://10.0.0.138 auf. Geben Sie den GUI Benutzernamen (admin) und das GUI Passwort für admin (auf dem Etikett des Geräts) ein und klicken Sie anschließend auf Login. Ein Assistent wird ausgeführt. Folgen Sie den Anweisungen des Assistenten.
5-a
5-b
5-c
EN
EN
5-a
5-b
5-c
DE
Use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.
Scan the QR code on the device label then follow the prompts to connect to the WLAN on your mobile device.
Press the WPS button until the WPS LEDs blinks amber. Press the WPS button on the client. If the WPS method fails, use the manual method (5-a).
Der WLAN Name und der WLAN-Schlüssel befinden sich auf dem Etikett am Gerät. Suchen Sie diesen WLAN Namen auf Ihrem Smartphone oder Notebook. Geben Sie den WLAN-Schlüssel für die WLAN-Verbindung ein.
Scannen Sie den QR-Code auf dem Geräteetikett und befolgen Sie die Anweisungen, um eine Verbindung zum WLAN auf Ihrem Mobilgerät herzustellen.
2 WiFi Connection / WLAN-Verbindung
3 Quick Start Wizard / Installationsassistent
WiFi
A1_XXXXXX
Connect
within
2 minutes
More than 1 second
6
WLAN Name
WLAN Passwort
A1_XXXXXX
XXXXXXXXXX
OR
10.0.0.138
3
WLAN Name: A1_XXXXXXWLAN Passwort: XXXXXXXXXXGUI Login: 10.0.0.138GUI Benutzername: adminGUI Passwort: XXXXXXXXXX
Typschild
5-a 5-b
5-c
Drücken Sie auf die WPS-Taste, bis die WPS LED orange blinkt. Drücken Sie die WPS Taste
am Client-Gerät. Wenn die WPS Einrichtung fehlschlägt, benutzen Sie bitte die manuelle
Einrichtung (5-a).
WPSON
NEINErsetzen Sie das vorhandene Kabel durch das Y-Kabel (siehe Variante A, Punkt 1).
JASie sind richtig verbunden.Weiter mit Punkt 5.
(optional)
PHONE DSL LAN 1–4 POWER
StromkabelS
oder
(optional)
DSL LAN 1–4 POWER
StromkabelS
oder
Splitter
Recommended