Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
.....................
Angetriebene Werkzeughalterfür die Komplettbearbeitung
auf Dreh- und FräszentrenRotary Tool Holder For Complete Machining
on Turning And Milling Centers
...............................................................
........
........
....
........
........
........
.....
...
EPPINGERSMARTER TOOLING SOLUTIONS
.......
................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................
........
The First and Only Tooling System using a Single Base Holder for Collet and Multiple other Tooling Adapters
............................................................................................................................................
........
........
...
........
........
...
........
.
........
.
........
.
........
........
........
.
........
. ......
........
........
........
.....
........
.
........
.
........
.
........
.
........
.
EPPINGER
Das erste Werkzeugsystem mit einem Grundhalter für Spannzange und viele andere Werkzeugadapter
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A TM
Technical Information
Verschiedene Übersetzungen für optimale Schnittbedingungen.
Alle Verschleissteile einsatzgehärtet.
Auch Werkzeuge mit innerer Kühlmittelzufuhr.
Die in DIN 69 880 genau definierten Werkzeug-halter der verschiedenen Formen werden vonEppinger mit höchster Präzision gefertigt. Das DIN-Programm wird durch eine umfangreiche Palettevon im harten Praxiseinsatz bewährten Sonder-haltern ergänzt.Die besonderen technischen Merkmale des komplet-ten Eppinger-Programms sind:
The various tool holder models defined in detailin DIN 69 880 are manufactured by Eppinger withultimate precision. The DIN range is enhanced by acomprehensive line of special holders tried andtested under tough conditions.
The full Eppinger range has a number of specialtechnical features:
Different ratios for ideal cutting conditions.
Rigid construction.
Internal coolant supply through taper nozzles featuring high-speed and precise adjustment with new type of clamp fixture.
Technische Merkmale
Dauerschmierung mit Fettfüllung.
Mehrfache Abdichtung und optimierte Lagerung.
Hohe Steifigkeit.
Kühlmittelzufuhr über schnell und exakt einstell- bare Kugeldüsen mit neuartiger Klemmung.
All wear parts are case-hardened.
Tools with internal coolant supply available.
Grease packing for lifetime.
Multiple sealings and optimum bearing configuration.
PräziseDie Kegel/Plananlage-Schnittstelle gewährleistethöchste Genauigkeit und Steifigkeit.
KompaktDer extrem kompakte Aufbau gewährleistet eineoptimale Kraftübertragung und Systemsteifigkeit.Daraus resultieren höhere Werkstücksgenauigkeitenund verbesserte Produktivität.
WirtschaftlichSie benötigen weniger aufwendige, teure Sonder-werkzeughalter, die Werkzeugstandzeiten verlängernsich erheblich. Die Folge ist die deutliche Minimie-rung Ihrer Gesamtwerkzeugkosten.
PreciseA conical and flat face planar interface ensureshighest accuracy and rigidity.
CompactOur short design assures maximum torquetransmission and rigidity, resulting in increasedmachining accuracy and consequently improvedproductivity.
EconomicalReduced requirements for special applicationtooling by using standard fixed and rotary baseholders result in tremendously lower total toolingcost.
Allgemeine Produkt-VorteilePRECI-FLEX®
PRECI-FLEX®General Product Advantages
1
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Allgemeine Produkt-VorteilePRECI-FLEXPRECI-FLEX®General Product Advantages
®
Maß- und Formtoleranzen des Systems / System Accuracy
0,003 mm max.(0.0001” max.)
0,005 mm max.(0.0002” max.)
0,01 mm max.(0.0004” max.)
30 mm(1.18”)
Wiederholgenauigkeit < 0,005 mmAccuracy of repeatability < 0,0002”
A TM 2
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Technische MerkmalePRECI-FLEXPRECI-FLEX®Technical Information
®
Werkzeugwechsel ohne Adapter-WechselTool Change without removing Adapter
Verschluss-Schrauben aus Spindel entfernen;Konus und Anlagefläche von Adapter und Spindel reinigen;Adapter in der Spindel mit 4 Schrauben (2)und Sechskantschlüssel (1) befestigen;Spindel mit Hakenschlüssel (3) gegenhalten;
Remove four screws from base holder.Wipe taper and flat mounting surface of adapterand base holder.With T-wrench (1) install and tighten four screws (2)using hook wrench (3) to keep spindle from rotating.
Achtung:Adapter muss an Planfläche der Spindel anliegen!
Caution:Adapter flange must be flush with mountingsurface of base holder.
3
Adapter-Wechsel / Adapter Change
1
2
A TM3
Bemerkungen / RemarksSiehe Eppinger Montage und Bedienungsanleitung fürPreci-Flex-Werkzeughalter auf Eppinger Homepage (www.eppinger.de)See Eppinger Manual (Assembling and Handling) forPreci-Flex-Toolholder at Eppinger Homepage (www.eppinger.de)
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A INH
A 12.1
A 2.1A 2.2A 4.1
A 12.5
Übersicht Firmen Overfiew Firms
GruppeGroup
Rotary Toolholder · Index
InhaltsverzeichnisAngetriebene Werkzeughalter
VDI 30 DIN 5482
A 1.1A 1.2A 1.3
Schaft / Shank
ANGELINI
BARUFFALDI VDI 30
VDI 40
VDI 50
VDI 25 BENZINGER
O/ 40
O/ 55
VDI 30
BIGLIA
BÖHRINGER VDI 40 DIN 5480 A 12.3
4
CHIAH CHYUN O/ 65 A 10.4
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A INH
Übersicht Firmen Overfiew Firms
GruppeGroup
A 4.1A 4.2
Rotary Toolholder · Index
InhaltsverzeichnisAngetriebene Werkzeughalter
A 12.5A 12.6
A 3.1A 3.2A 3.3A 3.4A 3.5
CINCINNATI
COLCHESTER
DOOSAN
VDI 30VDI 40
VDI 30 DIN 5482
VDI 40 DIN 5482
BMT 45
BMT 55
BMT 65
BMT 75
BMT 85
Schaft / Shank
5
A 10.2A 9.5
CMZ TX SERIETC + TL SERIE
A 12.1A 12.2A 12.3A 12.4A 12.5A 12.6A 12.7
DMG VDI 25 DIN 5480
VDI 30 DIN 5480
VDI 40 DIN 5480
VDI 50 DIN 5480
VDI 30 DIN 5482
VDI 40 DIN 5482
VDI 50 DIN 5482
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A INH
Rotary Toolholders · Index
InhaltsverzeichnisAngetriebene Werkzeughalter
A 12.3A 12.4A 12.5A 12.7
A 5.1
A 12.1A 12.2A 12.3
Übersicht Firmen Overfiew Firms
GruppeGroup
VDI 25
VDI 30
VDI 40
Schaft / Shank
EMCO
VDI 40 DIN 5480
VDI 50 DIN 5480
VDI 30 DIN 5482
VDI 50 DIN 5482
GRAZIANO
HAAS
HARDINGE A 3.1A 3.2A 3.3
VDI 40
BMT 45
BMT 55
BMT 65
A 16.1A 14.1A 16.2A9.5
O/ 42
O/ 45
O/ 63
O/ 32
GOODWAY
6
A 4.1A 4.2A 4.3
DUPLOMATIC VDI 30
VDI 40
VDI 50
A 15.1A 15.2
EMAG VDI 40
BMT 55
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 8.1A 8.2A 8.3A 8.4A 8.5A 8.6
Übersicht Firmen Overfiew Firms
GruppeGroup
A 7.1A 7.2A 7.3A 7.4
Schaft / Shank
HYUNDAI / WIA
INDEX VDI 25 W-Verzahnung
VDI 25 V-Leiste
VDI 30 V-Leiste
VDI 40 V-Leiste
QUICK TURN NEXUS 200
QUICK TURN NEXUS 300
QUICK TURN SMART 100/200
QUICK TURN SMART 300/350
HYPER QUADREX 100/150
HYPER QUADREX 200
MAZAK
A INH
Rotary Toolholders · Index
InhaltsverzeichnisAngetriebene Werkzeughalter
MONFORTS VDI 40 DIN 5480 A 12.3
A 3.2A 3.3A 3.4A 3.5
BMT 55
BMT 65
BMT 75
BMT 85
HWACHEON
7
A 13.1A 13.2A 13.3A 3.2A 3.3A 3.4A 3.5
VDI 30 DIN 5480
VDI 40 DIN 5480
VDI 40 DIN 5480
BMT O/ 55
BMT O/ 65
BMT O/ 75
BMT O/ 85
MIYANO O/ 45
O/ 38
A 14.1A 14.2
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A INH
A 12.1A 12.2A 12.3A 12.4A 12.5A 12.6A 12.7
A 12.1A 12.2A 4.1
A 10.1A 10.2A 10.3A 10.4
Übersicht Firmen Overfiew Firms
GruppeGroup
O/ 44
O/ 55
O/ 65
O/ 65 SUPERMILL
A 11.1A 11.2A 11.3A 11.4A 11.6A 11.7A 11.8
Schaft / Shank
NAKAMURA
OKUMA LB 200/GENOS L200/VDI 30
LB 300/GENOS L300/VDI 40
LB 400 VDI 40
LT 2000 V16 O/ 55,4
LB 2000/3000 O/ 60
LVT 300 VDI 40
LB 4000 O/ 60
VDI 25 DIN 5480
VDI 30 DIN 5480
VDI 40 DIN 5480
VDI 50 DIN 5480
VDI 30 DIN 5482
VDI 40 DIN 5482
VDI 50 DIN 5482
SAUTER
SCHAUBLIN VDI 25 DIN 5480
VDI 30 DIN 5480
VDI 30 DIN 1809
Rotary Toolholders · Index
InhaltsverzeichnisAngetriebene Werkzeughalter
8
O/ 55
VDI 30
MORI-SEIKI O/ 60
VDI 30
O/ 40
O/ 40 CC
SL
A 9.1A 9.2A 9.3A 9.4A 9.5
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Rotary Toolholders · Index
InhaltsverzeichnisAngetriebene Werkzeughalter
A INH
A 12.1A 12.5
A 4.2
Übersicht Firmen Overfiew Firms
GruppeGroup
VDI 40
A 12.5A 12.6A 17.1
Schaft / Shank
TAKISAWA
TRAUB VDI 30 DIN 5482
VDI 40 DIN 5482
TNX 65/42
VDI 25 DIN 5480
VDI 30 DIN 5482
WEILER
HARDINGE A 6.1 Bohr- und Fräskopf axial
radial
9
Bohr- und Fräskopf axial
radial A 3.3BMT 65 VICTOR
Weitere Maschinen finden Sie unter http://katalog.eppinger.de
Further machines are shown under http://katalog.eppinger.de
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Baruffaldi RevolverTOEM160/12 (VDI 30)*
A 1.1
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Katalog P
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt zurückgesetzt / Drilling Milling Head Angular, Offset
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
557.002.3 52RE .txe 1:1 0006 04
757.002.3 52RE .txe/.tni 1:1 0006 04
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Spinner TC67L / TS46 / TC46 / TC52-MC / TC65 /TS66-MC, Traub TND200 und andere.
* These tool holder are also suitable for following turning &milling centers: Spinner TC67L / TS46 / TC46 / TC52-MC /TC65 / TS66-MC, Traub TND200 and others.
Zub./Acc.Z 2.1
Zub./Acc.Z 3.3
Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
957.002.3 52RE .txe R 1:1 0006 04
167.002.3 52RE .txe/.tni R 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
182.105.9 52RE .txe R 1:1 0006 04
182.005.9 52RE .txe L 1:1 0006 04
182.305.9 52RE .txe/.tni R 1:1 0006 04
KühlungCoolant
KühlungCoolant
KühlungCoolant
10
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 1.2
Baruffaldi RevolverTOEM200/12 (VDI 40)*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt zurückgesetzt / Drilling Milling Head Angular, Offset
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
120.102.4 23RE .txe 1:1 0005 07
320.102.4 23RE .txe/.tni 1:1 0005 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
520.102.4 23RE .txe R 1:1 0005 07
720.102.4 23RE .txe/.tni R 1:1 0005 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
282.707.9 23RE .txe R 1:1 0005 07
282.907.9 23RE .txe/.tni R 1:1 0005 07
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Spinner TC67H und andere.
* These tool holder are also suitable for following turning &milling centers: Spinner TC67H and others.
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
11
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Baruffaldi RevolverTOEM250/12 (VDI 50)*
Katalog P
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
203.028.8 04RE .txe 1:1 0004 001
203.228.8 04RE .txe/.tni 1:1 0004 001
* Diese Werkzeuge werden auch auf folgenden Dreh- und Fräs-zentren eingesetzt: CMZ TBI 520, Spinner TC82 / FP82 u. a.
* These tool holder are also suitable for following turning &milling centers: CMZ TBI 520, Spinner TC82 / FP82 and others.
Zub./Acc.Z 2.1
Zub./Acc.Z 3.3
Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
072.148.9 04RE .txe R 1:1 0004 001
072.548.9 04RE .txe/.tni R 1:1 0004 001
A 1.3
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
12
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
573.570.7 61RE .txe 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
563.570.7 02RE .txe 1:1 0006 52
073.570.7 02RE .txe/.tni 1:1 0006 52
KühlungCoolant
BigliaSchaft / Shank 40*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf gerade, doppelt / Drilling Milling Head Straight, Double
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
582.570.7 02RE .txe 1:1 0006 52
592.570.7 02RE .txe/.tni 1:1 0006 52
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* These tool holder are also suitable for following turning &milling centers: Biglia B436 and others.
A 2.1
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
13
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
Bohr-Fräskopf abgewinkelt, links-rechts,doppelt / Drilling Milling Head Angular, Left-Right, Double
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
003.570.7 61RE .txe 1:1 0006 02
KühlungCoolant
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
BigliaSchaft / Shank 55*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
020.270.7 23RE .txe 1:1 0006 04
720.270.7 23RE .txe/.tni 1:1 0006 04
KühlungCoolant
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
910.270.7 23RE .txe R 1:1 0006 04
620.270.7 233RE .txe/.tni R 1:1 0006 04
KühlungCoolant
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Biglia B1200M / B301 /501 / B650 /M, SM, Y, YS, B445 / B470 und andere.
* These tool holder are also suitable for following turning &milling centers: Biglia B1200M / B301 /501 / B650 / M, SM,Y, YS, B445 / B470 and others.
14A 2.2
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 3.1
BMT 45* Compensation Clutch / Ausgleichskupplung
Doosan / Hardinge
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
021.370.7 02RE .txe 1:1 0006 52
853.370.7 02RE .txe/.tni 1:1 0006 52
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
762.370.7 02RE .txe R/L 1:1 0006 52
953.370.7 02RE .txe/.tni R/L 1:1 0006 52
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Lynx 220 und andere.
* These tool holder are also suitable for following turning &milling centers: Lynx 220 and others.Katalog P
Zub./Acc.Z 2.1
Zub./Acc.Z 3.3
Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
15
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
072.370.7 52RE .txe 07 401 1:1 0006 04
082.370.7 52RE .txe 58 911 1:1 0006 04
163.370.7 52RE .txe/.tni 07 401 1:1 0006 04
263.370.7 52RE .txe/.tni 58 911 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
116.370.7 52RE .txe 07 601 1:1 0006 52 ––
A 3.2
* These tool holder are also suitable for following turning &milling centers: Doosan P230 / P240 / P1500Y / 2000Y / 2500Y,TT1500 / TT1800 and others.
BMT 55* Compensation Clutch / Ausgleichskupplung
Doosan / Hwacheon / Hyundai Wia / Hardinge
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
mroF nxam
Mmn
.rherDnoitatoR
811.370.7 52RE .txe I 0006 04
063.370.7 52RE .txe/.tni I 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
182.370.7 52RE .txe R 1:1 0006 04
363.370.7 52RE .txe/.tni R 1:1 0006 52
Bohr-Fräskopf abgewinkelt, links-rechts/ Drilling Milling Head Angular, Left-Right
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
16
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 3.3
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- und Fräs-zentren eingesetzt: Doosan P300 / TX200 / TU2000 /TT2000 /2500(SY) / MX2000 / 2500, WIA SKT250MS u.a.
* These tool holder are also suitable for following turning &milling centers: Doosan P300 / TX200 / TU2000 / TT2000 /2500(SY) MX2000 / 2500, WIA SKT 250MS a.o.
BMT 65* Compensation Clutch / Ausgleichskupplung
Doosan / Victor / Hwacheon / Hyundai Wia
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
042.370.7 23RE .txe 1:1 0004 07
463.370.7 23RE .txe/.tni 1:1 0004 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
382.370.7 23RE .txe R 1:1 0004 07
763.370.7 23RE .txe/.tni R 1:1 0004 07
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
216.370.7 23RE .txe 1:1 0004 05 ––
.rN-lekitrA.oNtraP
.znnapStelloC
1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
172.370.7 23RE .txe 27 011 1:1 0004 07
282.370.7 23RE .txe 001 831 1:1 0004 07
563.370.7 23RE .txe/.tni 27 011 1:1 0004 07
663.370.7 23RE .txe/.tni 001 831 1:1 0004 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
17
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
572.370.7 04RE .txe 06 701 1:1 0003 001
043.370.7 04RE .txe 09 731 1:1 0003 001
073.370.7 04RE .txe/.tni 06 701 1:1 0003 001
143.370.7 04RE .txe/.tni 09 731 1:1 0003 001
A 3.4
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Doosan P400 und andere.
* These tool holder are also suitable for following turning &milling centers: Doosan P400 and others.
BMT 75* Compensation Clutch / Ausgleichskupplung
Doosan / Hwacheon / Hyundai Wia
Bohr-Fräskopf gerade, mono / Drilling Milling Head Straight, Mono
Bohr-Fräskopf abgewinkelt, links / Drilling Milling Head Angular, Left
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
542.370.7 04RE .txe 1:1 0003 001
963.370.7 04RE .txe/.tni 1:1 0003 001
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
18
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
772.370.7 05RE .txe 58 141 1:1 0003 012
532.470.7 05RE .txe 011 661 1:1 0003 012
273.370.7 05RE txe/.tni 58 141 1:1 0003 012
033.470.7 05RE txe/.tni 011 661 1:1 0003 012
A 3.5
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Doosan P600 / P700 / P800 / VT 1100und andere.
* These tool holder are also suitable for following turning &milling centers: Doosan P600 / P700 / P800 / VT 1100 andothers.
BMT 85* Compensation Clutch / Ausgleichskupplung
Doosan / Hwacheon / Hyundai Wia
Bohr-Fräskopf gerade, mono / Drilling Milling Head Straight, Mono
Bohr-Fräskopf abgewinkelt, links / Drilling Milling Head Angular, Left
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
052.370.7 05RE .txe 1:1 0053 012
173.370.7 05RE .txe/.tni 1:1 0053 012
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
19
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Biglia B42 / 111, Cincinnati Hawk 150,Doosan Puma 200, Emcoturn 345, Schaublin 140-CNC /180CCN und andere.
* These tool holder are also suitable for following turning &milling centers: Biglia B42 / 111, Cincinnati Hawk 150,Doosan Puma 200, Emcoturn 345, Schaublin 140-CNC /180CCN and others.
A 4.1
Duplomatic Revolver VDI 30Kupplung / Coupling / DIN 1809*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
456.002.3 52RE .txe 1:1 0006 04
827.002.3 52RE .txe/.tni 1:1 0006 04
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
027.002.3 52RE .txe R 1:1 0006 04
427.002.3 52RE .txe L 1:1 0006 04
227.002.3 52RE .txe/:tni R 1:1 0006 04
627.002.3 52RE .txe/.tni L 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
472.105.9 52RE .txe R 1:1 0006 04
472.005.9 52RE .txe L 1:1 0006 04
472.305.9 52RE .txe/:tni R 1:1 0006 04
472.205.9 52RE .txe/.tni L 1:1 0006 04
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
20
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 4.2
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Cincinnati Hawk 200 / 250, Hyundai Hit20M / 200M / 250M, Takisawa TMM-250 / 200 und andere.
* These tool holder are also suitable for following turning &milling centers: Cincinnati Hawk 200 / 250, Hyundai Hit 20M /200M / 250M, Takisawa TMM-250 / 200 and others.
Duplomatic Revolver VDI 40Kupplung / Coupling / DIN 1809*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
839.002.4 23RE .txe 1:1 0005 07
589.002.4 23RE .txe/.tni 1:1 0005 07
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
789.002.4 23RE .txe R 1:1 0005 07
199.002.4 23RE .txe L 1:1 0005 07
989.002.4 23RE .txe/:tni R 1:1 0005 07
399.002.4 23RE .txe/.tni L 1:1 0005 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
372.707.9 23RE .txe R 1:1 0005 07
372.607.9 23RE .txe L 1:1 0005 07
372.907.9 23RE .txe/:tni R 1:1 0005 07
372.807.9 23RE .txe/.tni L 1:1 0005 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
21
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A 4.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Hyundai Hit 30M (VDI 50) und andere.
* These tool holder are also suitable for following turning &milling centers: Hyundai Hit 30M (VDI 50) and others.
Duplomatic Revolver VDI 50Kupplung / Coupling / DIN 1809*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
992.028.8 04RE .txe 1:1 0004 001
992.228.8 04RE .txe/.tni 1:1 0004 001
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
271.148.9 04RE .txe R 1:1 0004 001
271.048.9 04RE .txe L 1:1 0004 001
271.548.9 04RE .txe/:tni R 1:1 0004 001
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
22
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 5.1
Haas SL20, SL30, SL40
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links / Drilling Milling Head Angular, Left
.rN-lekitrA.oNtraP
.znnapStelloC
3Lmm
i nxam
Mmn
.rherDnoitatoR
459.002.4 23RE .txe 58,401 1:1 0004 04
659.002.4 23RE .txe 55,711 1:1 0004 04
859.002.4 23RE .txe 52,031 1:1 0004 04
333.102.4 23RE .txe/.tni 58,401 1:1 0004 04
433.102.4 23RE .txe/.tni 55,711 1:1 0004 04
533.102.4 23RE .txe/.tni 52,031 1:1 0004 04
.rN-lekitrA.oNtraP
.znnapStelloC
3Lmm
i nxam
Mmn
.rherDnoitatoR
559.002.4 23RE .txe 58,401 1:1 0004 04
759.002.4 23RE .txe 55,711 1:1 0004 04
959.002.4 23RE .txe 52,031 1:1 0004 04
923.102.4 23RE .txe/.tni 58,401 1:1 0004 04
572.102.4 23RE .txe/.tni 55,711 1:1 0004 04
033.102.4 23RE .txe/.tni 52,031 1:1 0004 04
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Haas SL20 / SL30 / SL40 und andere.
* These tool holder are also suitable for following turning &milling centers: Haas SL20 / SL30 / SL40 and others.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
23
3Lmm
TERRUT-IDV03/02LSsaaH)Y(03,02,01tS04IDVsaaH
58,401
TERRUT-saaH03/02LSsaaHTERRUT-IDV52/51LT/04LSsaaH03-02FD/SD/tS-21BVdirbyHsaaH
5,711
terruT-saaH04LSsaaH 52,031
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
061.007.2 02RE .txe R/L 2:1 00021 71
041.007.2 02RE .txe/.tni R/L 2:1 00021 71
A 7.1
Index VDI 25 W-Verzahnung / W-Type Serration*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
Bohr-Fräskopf abgewinkelt, / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
090.007.2 02RE .txe 1:1 0006 52
290.007.2 02RE .txe/.tni 1:1 0006 52
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
490.007.2 02RE .txe R/L 1:1 0006 52
590.007.2 02RE .txe/.tni R/L 1:1 0006 52
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Index G160/200 m. W-Verzahnung u.a.
* These tool holder are also suitable for following turning &milling centers: Index G160/200 with W-Tooth and others.
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
24
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 7.2
Index VDI 25 V-Leiste / Vee-Bar*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
540.007.2 02RE .txe 1:1 0006 52
050.007.2 02RE .txe/.tni 1:1 0006 52
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
930.007.2 02RE .txe R/L 1:1 0006 52
040.007.2 02RE .txe/.tni R/L 1:1 0006 52
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- und Fräs-zentren eingesetzt: Index G160/200/MS42/V100, V160 u. a.
* These tool holder are also suitable for following turning &milling centers: Index G160/200/MS42/V100, V160 a. others.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
25
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
241.007.2 02RE .txe L 2:1 00021 71
261.007.2 02RE .txe/.tni L 2:1 00021 71
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
KühlungCoolant
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
913.915.9 02RE .txe R 5,2:1 00051 01
A 7.3
Index VDI 30 V-Leiste / Vee-Bar*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
086.002.3 52RE .txe 1:1 0006 04
186.002.3 52RE .txe/.tni 1:1 0006 04
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
286.002.3 52RE .txe R 1:1 0006 04
807.002.3 52RE .txe L 1:1 0006 04
386.002.3 52RE .txe/:tni R 1:1 0006 04
907.002.3 52RE .txe/.tni L 1:1 0006 04
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Index G250/300, V160/250/300 u.a.
* These tool holder are also suitable for following turning &milling centers: Index Index G250/300, V160/250/300 a. o.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
Kühl.Cool.
26
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 7.4
Index VDI 40 V-Leiste / Vee-Bar*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
281.102.4 23RE .txe 1:1 0006 05
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
212.102.4 23RE .txe/.tni 1:1 0006 05
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
992.102.4 23RE .txe R/L 1:1 0006 05
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
* Diese Werkzeuge werden auch auf folgenden Dreh- und Fräs-zentren eingesetzt: Index G250/300, V160/250/300 und andere.
* These tool holder are also suitable for following turning &milling centers: Index G250/300, V160/250/300 and others.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
27
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
514.270.7 23RE .txe R 1:1 0006 07
624.270.7 23RE .txe L 1:1 0006 07
524.270.7 23RE .txe/.tni R 1:1 0006 07
724.270.7 23RE .txe/.tni L 1:1 0006 07
Mazak Quick Turn Nexus 200/250*
Bohr-Fräskopf gerade, versetzt / Drilling Milling Head Straight, Shifted
A 8.1
Bohr-Fräskopf abgewinkelt / Drilling milling head radial
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
614.270.7 23RE .txe R 1:1 0006 07
824.270.7 23RE .txe/.tni R 1:1 0006 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Mazak Nexus SQT 15/18 M-MS,SQT 200/250 M-MS und andere.
* These tool holder are also suitable for following turning &milling centers: Mazak Nexus SQT 15/18 M-MS, SQT 200/250 M-MS and others.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
28
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 8.2
Mazak Quick Turn Nexus 300/350*
Bohr-Fräskopf gerade, versetzt / Drilling Milling Head Straight, Shifted
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
594.270.7 04RE .txe R 1:1 0004 001
515.270.7 04RE .txe/.tni R 1:1 0004 001
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
005.270.7 04RE .txe R 1:1 0004 001
025.270.7 04RE .txe/.tni R 1:1 0004 001
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- und Fräs-zentren eingesetzt: Antrieb Mazak SQT 28/30/300 und andere.
* These tool holder are also suitable for following turning &milling centers: Antrieb Mazak SQT 28/30/300 and others.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
29
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
587.570.7 02RE .txe 1:1 0006 31
Mazak Quick Turn Smart 100/200/250M*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Radial
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
034.570.7 23RE .txe 1:1 0006 07
064.570.7 23RE .txe/.tni 1:1 0006 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
564.570.7 23RE .txe R 1:1 0006 07
074.570.7 23RE .txe/.tni R 1:1 0006 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf winkelverstellbar / Drilling Milling Head Angular Adjustable
KühlungCoolant
A 8.3 30
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Mazak Quick Turn Smart 300/350
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
436.570.7 04RE .txe 1:1 0006 001
536.570.7 04RE .txe/.tni 1:1 0006 001
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
046.570.7 04RE .txe R 1:1 0006 001
246.570.7 04RE .txe/.tni R 1:1 0006 001
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
A 8.4
Bohr-Fräskopf winkelverstellbar / Drilling Milling Head Angular Adjustable
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
097.570.7 02RE .txe 1:1 0006 31
KühlungCoolant
31
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
571.570.7 02RE .txe 1:1 0006 31
Mazak Hyper Quadrex 100/150*
Bohr-Fräskopf gerade, rechts versetzt / Drilling Milling Head Straight, Shifted Right
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Radial
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
532.570.7 23RE .txe R 1:1 0006 07
042.570.7 23RE .txe/.tni R 1:1 0006 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
032.570.7 23RE .txe R 1:1 0006 07
232.570.7 23RE .txe/.tni R 1:1 0006 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf winkelverstellbar / Drilling Milling Head Angular Adjustable
KühlungCoolant
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- und Fräs-zentren eingesetzt: Mazak Multiplex 6100 und andere.
* These tool holder are also suitable for following turning &milling centers: Mazak Multiplex 6100 and others.
A 8.5 32
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Mazak Hyper Quadrex 200*
Bohr-Fräskopf gerade, rechts versetzt / Drilling Milling Head Straight, Shifted Right
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
026.470.7 23RE .txe R 1:1 0006 07
586.470.7 23RE .txe/.tni R 1:1 0006 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
286.470.7 23RE .txe R 1:1 0006 07
486.470.7 23RE .txe/.tni R 1:1 0006 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Mazak Multiplex 6200 und andere.
* These tool holder are also suitable for following turning &milling centers: Mazak Multiplex 6200 and others.
A 8.633
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A 9.1
Mori Seiki NL 1500*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
591.270.7 04RE .txe 1:1 0008 001
542.270.7 04RE .txe/.tni 1:1 0008 001
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
572.270.7 04RE .txe R/L 1:1 0008 001
082.270.7 04RE .txe/.tni R/L 1:1 0008 001
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
523.270.7 04RE .txe 1:1 0008 001 ––
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Mori Seiki NL 2000/2500/3000 / DMG -CTX beta 800 / + NT 4200 und andere.
* These tool holder are also suitable for following turning& milling centers: Mori Seiki NL 2000/2500/3000 / DMG -CTX beta 800 / + NT 4200 and others.
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
34
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 9.2
Mori Seiki ZT1000/1500
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
567.002.3 02RE .txe 1:1 0006 52
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
667.002.3 02RE .txe L 1:1 0006 52
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
297.002.3 02RE .txe 1:1 0006 52 ––
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
35
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Mori Seiki NZ 1500*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Mori Seiki NZ 2000 und andere.
* These tool holder are also suitable for following turning &milling centers: Mori Seiki NZ 2000 and others.Katalog P
Zub./Acc.Z 2.1
Zub./Acc.Z 3.3
Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
084.370.7 52RE .txe 1:1 00021 52
284.370.7 52RE .txe/.tni 1:1 00021 52
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
384.370.7 52RE .txe R/L 1:1 00021 52
484.370.7 52RE .txe/.tni R/L 1:1 00021 52
KühlungCoolant
KühlungCoolant
A 9.3 36
Bohr-Fräskopf gerade, versetzt / Drilling Milling Head Straight, Shifted
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
584.370.7 52RE .txe 1:1 00021 52
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
051.570.7 52RE .txe/tni R/L 1:1 00021 52
KühlungCoolant
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
577.470.7 61RE .txe 1:1 00021 8
37 A 9.3.1
Mori Seiki NZ 1500*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf winkelverstellbar / Drilling Milling Head Angular Adjustable
KühlungCoolant
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Mori Seiki NZ 2000 und andere.
* These tool holder are also suitable for following turning &milling centers: Mori Seiki NZ 2000 and others. Katalog P
Zub./Acc.Z 2.1
Zub./Acc.Z 3.3
Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
38A 9.4
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Mori Seiki NL 1500 CC und andere.
* These tool holder are also suitable for following turning &milling centers: Mori Seiki NL 1500 CC and others.Katalog P
Zub./Acc.Z 2.1
Zub./Acc.Z 3.3
Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
Mori Seiki NZ 1500/2000 CC*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
008.570.7 52RE .txe 1:1 00021 52
507.570.7 52RE .txe/.tni 1:1 00021 52
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
571.670.7 52RE .txe R/L 1:1 00021 52
081.670.7 52RE .txe/.tni R/L 1:1 00021 52
KühlungCoolant
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
891.670.7 52RE .txe 1:1 00021 52
KühlungCoolant
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Mori Seiki SL 150 / Goodway / CMZ*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
070.470.7 23RE .txe 1:1 0006 001
270.470.7 23RE .txe/.tni 1:1 0006 001
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
033.270.7 23RE .txe R 1:1 0006 07
377.470.7 23RE .txe/.tni R 1:1 0006 07
KühlungCoolant
KühlungCoolant
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Mori Seiki SL 200/250 und andere.
* These tool holder are also suitable for following turning &milling centers: Mori Seiki SL 200/250 and others. Katalog P
Zub./Acc.Z 2.1
Zub./Acc.Z 3.3
Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
39 A 9.5
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Nakamura Schaft / Shank 44
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
565.270.7 02RE .txe 1:1 0006 52
506.270.7 02RE .txe/.tni 1:1 0006 52
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
075.270.7 02RE .txe R/L 1:1 0006 52
056.270.7 02RE .txe/.tni R/L 1:1 0006 52
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Nakamura WT100 und andere.
* These tool holder are also suitable for following turning &milling centers: Nakamura WT100 and others.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
A 10.1 40
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 10.2
Nakamura Schaft / Shank 55*
* These tool holder are also suitable for following turning &milling centers: Nakamura TW 10 / SC / WT150 / 250 (dim.* = 55),WTW150 / WTS150 / Super NTJ (dim.* = 75) and others.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
585.170.7 52RE .txe 1:1 0006 52
007.170.7 52RE .txe/.tni 1:1 0006 52
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
509.170.7 52RE .txe R 1:1 0006 52
709.170.7 52RE .txe/.tni R 1:1 0006 52
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
546.170.7 52RE .txe R/L 1:1 0006 52
107.170.7 52RE .txe/.tni R/L 1:1 0006 52
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
.rN-lekitrA.oNtraP
.znnapStelloC
1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
073.270.7 52RE .txe 55 49 1:1 0006 52 ––
522.370.7 52RE .txe 57 411 1:1 0006 52 ––
KühlungCoolant
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
*
41
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Nakamura Schaft / Shank 65*
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
545.270.7 23RE .txe 1:1 0006 07 ––
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
701.270.7 23RE .txe 1:1 0006 07
121.270.7 23RE .txe/.tni 1:1 0006 07
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
601.270.7 23RE .txe R/L 1:1 0006 07
021.270.7 23RE .txe/.tni R/L 1:1 0006 07
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
A 10.3
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
045.270.7 02RE .txe 1:1 0063 8
Bohr-Fräskopf winkelverstellbar / Drilling Milling Head Angular Adjustable
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
KühlungCoolant
* These tool holder are also suitable for following turning &milling centers: Nakamura TW20 / WT300 / SC300 /Super NTXand others.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
42
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Nakamura Schaft / Shank 65*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
020.470.7 23RE .txe 1:1 0006 07
520.470.7 23RE .txe/.tni 1:1 0006 07
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
059.370.7 23RE .txe R/L 1:1 0006 07
589.370.7 23RE .txe/.tni R/L 1:1 0006 07
A 10.4
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
* These tool holder are also suitable for following turning &milling centers: Nakamura TW20 / WT300 / SC300 /Super NTXand others.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
* Diese Werkzeuge werden auch auf folgenden Dreh- u. Fräs-zentren eingesetzt: Nakamura TW20 / WT300 / SC300 /SuperNTX und andere.
43
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A 11.1
Okuma LB 200 / Genos L 200*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
826.002.3 52RE .txe 1:1 0006 04
767.002.3 52RE .txe/.tni 1:1 0006 04
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
872.005.9 52RE .txe L 1:1 0006 04
872.205.9 52RE .txe/.tni L 1:1 0006 04
* Diese Werkzeuge werden auch auf folgenden Dreh- u. Fräs-zentren eingesetzt: Okuma LB10-M / LT200M / LT10M u. a.
* These tool holder are also suitable for following turning &milling centers: Okuma LB10-M / LT200M / LT10M and others.
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
44
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 11.2
Okuma LB 300 / Genos L 300*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
280.102.4 23RE .txe 1:1 0005 05
259.002.4 23RE .txe/.tni 1:1 0005 05
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
580.102.4 23RE .txe L 1:1 0004 07
780.102.4 23RE .txe/.tni L 1:1 0004 07
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Okuma LB / LU15-M / LT300M /LT15M / LB300MYW / LB300MW, LVT300-M, MacTurn250/350 und andere.
* These tool holder are also suitable for following turning &milling centers: Okuma LB / LU15-M / LT300M / LT15M /LB300MYW / LB300MW, LVT300-M, MacTurn 250/350 a. o.
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
382.607.9 23RE .txe L 1:1 0004 07
382.807.9 23RE .txe/.tni L 1:1 0004 07
9.706.283 und 9.708.283 ungeeignet für Okuma LB300-MW
9.706.283 and 9.708.283 are unsuited for Okuma LB300-MW
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
45
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A 11.3
* Diese Werkzeuge werden auch auf folgenden Dreh- u. Fräs-zentren eingesetzt: Okuma LVT400-M / LB / LU25-M u. a.
* These tool holder are also suitable for following turning &milling centers: Okuma LVT400-M / LB / LU25-M and others.
Okuma LB 400-M*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
390.102.4 23RE .txe 1:1 0005 05
069.002.4 23RE .txe/.tni 1:1 0005 05
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
690.102.4 23RE .txe L 1:1 0005 07
890.102.4 23RE .txe/.tni L 1:1 0005 07
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
292.607.9 23RE .txe L 1:1 0005 07
292.807.9 23RE .txe/.tni L 1:1 0005 07
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
582.102.4 02RE .txe R/L 5,2:1 00001 04
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
46
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
011.570.7 52RE .txe 1:1 0005 04
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
550.570.7 52RE .txe R/L 1:1 0006 04
060.570.7 52RE .txe/.tni R/L 1:1 0006 04
A 11.4
Okuma LT 2000 V16
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
090.570.7 52RE .txe 1:1 0006 04
860.570.7 52RE .txe/.tni 1:1 0006 04
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
088.570.7 02RE .txe/.tni 1:1 0006 31
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
47
KühlungCoolant
Bohr-Fräskopf winkelverstellbar / Drilling Milling Head Angular Adjustable
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A 11.6
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Okuma LB2500 / LB3000EX und andere.
* These tool holder are also suitable for following turning &milling centers: Okuma LB2500 / LB3000EX and others.
Okuma LB 2000 EX*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
000.370.7 23RE .txe 1:1 0006 07
071.370.7 23RE .txe/.tni 1:1 0006 07
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
580.370.7 23RE .txe R/L 1:1 0006 07
081.370.7 23RE .txe/.tni R/L 1:1 0006 07
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf abgewinkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
017.370.7 23RE .txe 1:1 0006 07 ––
KühlungCoolant
Bohr-Fräskopf winkelverstellbar / Drilling Milling Head Angular Adjustable
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
005.370.7 02RE .txe 1:1 0006 31
KühlungCoolant
48
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
A 11.7
Okuma LVT 300M*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
280.102.4 23RE .txe 1:1 0005 05
259.002.4 23RE .txe 1:1 0005 05
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
980.102.4 23RE .txe R 1:1 0005 07
190.102.4 23RE .txe/.tni R 1:1 0005 07
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
49
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
A 11.8
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
Okuma LB 4000 EX
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
083.370.7 04RE .txe 1:1 0006 001
583.370.7 04RE .txe/.tni 1:1 0006 001
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
093.370.7 04RE .txe R/L 1:1 0006 001
593.370.7 04RE .txe/.tni R/L 1:1 0006 001
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
50
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
A 12.1
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Benzinger TNI, Emcoturn 332, Gilde-meister Twin 32/42, Sauter 0.5.450.2, Weiler DZ45-H u. a..
* These tool holder are also suitable for following turning &milling centers: Benzinger TNI, Emcoturn 332, GildemeisterTwin 32/42, Sauter 0.5.450.2, Weiler DZ45-H and others.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
560.007.2 02RE .txe 1:1 0006 52
570.007.2 02RE .txe/.tni 1:1 0006 52
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
922.542.9 02RE .txe R/L 1:1 0006 52
922.742.9 02RE .txe/.tni R/L 1:1 0006 52
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
070.007.2 02RE .txe R/L 1:1 0006 52
080.007.2 02RE .txe/.tni R/L 1:1 0006 52
Sauter VDI 25, DIN 5480W14x0,8x30x16*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
51
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Sauter VDI 30, DIN 5480, W16x0,8x30x18*Duplomatic BR VDI 30, DIN 5480, W16x0,8x30x18*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
526.002.3 52RE .txe 1:1 0006 04
096.002.3 52RE .txe/.tni 1:1 0006 04
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
A 12.2
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Anhular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
.sreV 1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
017.002.3 52RE .txe R/L 58 811 1:1 0006 04
507.002.3 52RE .txe R/L 001 331 1:1 0006 04
117.002.3 52RE .txe/.tni R/L 58 811 1:1 0006 04
607.002.3 52RE .txe/.tni R/L 001 331 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
.sreV 1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
436.002.3 52RE .txe R 58 811 1:1 0006 04536.002.3 52RE .txe L 58 811 1:1 0006 04636.002.3 52RE .txe R 001 331 1:1 0006 04736.002.3 52RE .txe L 001 331 1:1 0006 04537.002.3 52RE .txe/.tni R 58 811 1:1 0006 04737.002.3 52RE .txe/.tni L 58 811 1:1 0006 04107.002.3 52RE .txe/.tni R 001 331 1:1 0006 04007.002.3 52RE .txe/.tni L 001 331 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
.sreV 1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
462.105.9 52RE .txe R 58 811 1:1 0006 04462.005.9 52RE .txe L 58 811 1:1 0006 04176.002.3 52RE .txe R/L 58 811 1:1 0006 04562.105.9 52RE .txe R 001 331 1:1 0006 04562.005.9 52RE .txe L 001 331 1:1 0006 04376.002.3 52RE .txe R/L 001 331 1:1 0006 04462.305.9 52RE .txe/.tni R 58 811 1:1 0006 04462.205.9 52RE .txe/.tni L 58 811 1:1 0006 04562.305.9 52RE .txe/.tni R 001 331 1:1 0006 04562.205.9 52RE .txe/.tni L 001 331 1:1 0006 04
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* These tool holder are also suitable for following turning &milling centers: DMG - CTX 210/310/320/Twin 42/65, Sauter0.5.450.2, Schaublin 42L/65 (only straight head), Spinner UP65-SMC and others.
KühlungCoolant
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
52
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Sauter VDI 40, DIN 5480, W20x0,8x30x24*Duplomatic BR VDI 40, DIN 5480, W20x0,8x30x24*
A 12.3
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
078.002.4 23RE .txe 1:1 0005 07
578.002.4 23RE .txe/.tni 1:1 0005 07
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
.sreV 1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
569.002.4 23RE .txe R/L 001 831 1:1 0004 07
769.002.4 23RE .txe R/L 021 851 1:1 0004 07
579.002.4 23RE .txe/.tni R/L 001 831 1:1 0004 07
779.002.4 23RE .txe/.tni R/L 021 851 1:1 0004 07
.rN-lekitrA.oNtraP
.znnapStelloC
.sreV 1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
762.707.9 23RE .txe R 001 831 1:1 0005 07762.607.9 23RE .txe L 001 831 1:1 0005 07862.707.9 23RE .txe R 021 851 1:1 0005 07862.607.9 23RE .txe L 021 851 1:1 0005 07762.907.9 23RE .txe/.tni R 001 831 1:1 0005 07762.807.9 23RE .txe/.tni L 001 831 1:1 0005 07862.907.9 23RE .txe/.tni R 021 851 1:1 0005 07862.807.9 23RE .txe/.tni L 021 851 1:1 0005 07
.rN-lekitrA.oNtraP
.znnapStelloC
.sreV 1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
009.002.4 23RE .txe R 001 831 1:1 0005 07109.002.4 23RE .txe L 001 831 1:1 0005 07209.002.4 23RE .txe R 021 851 1:1 0005 07309.002.4 23RE .txe L 021 851 1:1 0005 07000.102.4 23RE .txe/.tni R 001 831 1:1 0005 07200.102.4 23RE .txe/.tni L 001 831 1:1 0005 07400.102.4 23RE .txe/.tni R 021 851 1:1 0005 07600.102.4 23RE .txe/.tni L 021 851 1:1 0005 07571.102.4 23RE .txe L 001 831 1:2 0052 07671.102.4 23RE .txe/.tni L 001 831 1:2 0052 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* These tool holder are also suitable for following turning &milling centers: Boehringer NG 180/200, DMG - CTV200/250/CTX420/510/520/GMX250/300/400/500/TWIN 65/102,Graziano CTX500, Sauter 0.5.450.2 and others.
KühlungCoolant
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
53
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Sauter VDI 50, DIN 5480, W24x1,25x30x18*Duplomatic BR VDI 50, DIN 5480, W24x1,25x30x18*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
090.002.5 04RE .txe 1:1 0004 001
111.002.5 04RE .txe/.tni 1:1 0004 001
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
001.002.5 04RE .txe R 1:1 0004 001
311.002.5 04RE .txe/.tni R 1:1 0004 001
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
272.148.9 04RE .txe R 1:1 0004 001
A 12.4
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: DMG - CTX620, Graziano CTX620,Sauter 0.5.450.2 und andere.
* These tool holder are also suitable for following turning &milling centers: DMG - CTX620, Graziano CTX620, Sauter0.5.450.2 and others.
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
54
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Sauter VDI 30, DIN 5482, B15x12*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
626.002.3 52RE .txe 1:1 0006 04
947.002.3 52RE .txe/.tni 1:1 0006 04
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
A 12.5
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Angelini FE-LiX/SNUPY, ColchesterTornado T6M/120M, EMCO 360, Graziano GR350C, TraubTNA300, Weiler DZ45-T/DZ67/DZ66 und andere.
* These tool holder are also suitable for following turning &milling centers: Angelini FE-LiX/SNUPY, Colchester TornadoT6M/120M, EMCO 360, Graziano GR350C, Traub TNA300,Weiler DZ45-T/DZ67/DZ66 and others.
**
**
**
** Nicht für Traub TNA300 geeignet.
** Not to be used on Traub TNA300.
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
157.002.3 52RE .txe R 1:1 0006 04
597.002.3 52RE .txe L 1:1 0006 04
357.002.3 52RE .txe/.tni R 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
.sreV 1Lmm
2Lmm
i nxam
Mmn
.rherDnoitatoR
408.002.3 52RE .txe R 67 601 1:1 0006 52
972.105.9 52RE .txe R 58 811 1:1 0006 04
508.002.3 52RE .txe/.tni R 67 601 1:1 0006 52
972.205.9 52RE .txe/.tni L 58 811 1:1 0006 04
972.305.9 52RE .txe/.tni R 58 811 1:1 0006 04
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
55
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Sauter VDI 40, DIN 5482, B17x14*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
310.102.4 23RE .txe 1:1 0005 07
510.102.4 23RE .txe/.tni 1:1 0005 07
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
710.102.4 23RE .txe R 1:1 0005 07
910.102.4 23RE .txe/.tni R 1:1 0005 07
A 12.6
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Colchester Tornado T8M/220M, DMG -CTX500E, Traub TNA400 und andere.
* These tool holder are also suitable for following turning &milling centers: Colchester Tornado T8M/22M, DMG -CTX500E, Traub TNA400 and others.
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
082.707.9 23RE .txe R 1:1 0005 07
082.907.9 23RE .txe/.tni R 1:1 0005 07
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
56
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
Sauter VDI 50, DIN 5482, B20x17*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
003.028.8 04RE .txe 1:1 0004 001
003.228.8 04RE .txe/.tni 1:1 0004 001
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
371.148.9 04RE .txe R 1:1 0004 001
371.548.9 04RE .txe/.tni R 1:1 0004 001
A 12.7
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: DMG - CTX600E/GT700, GrazianoCTX700 und andere.
* These tool holder are also suitable for following turning &milling centers: DMG - CTX600E/GT700, Graziano CTX700and others.
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
57
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Hyundai Wia / KIA SKT150S/SY*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
526.002.3 52RE .txe 1:1 0006 04
096.002.3 52RE .txe/.tni 1:1 0006 04
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
868.002.3 52RE .txe R 1:1 0006 04
968.002.3 52RE .txe L 1:1 0006 04
A 13.1
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: Doosan 310M/SM/SML und andere.
* These tool holder are also suitable for following turning &milling centers: Doosan 310M/SM/SML and others.
KühlungCoolant
KühlungCoolant
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
58
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
493.102.4 23RE .txe 1:1 0005 04 ––
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
430.102.4 23RE .txe R 1:1 0005 07
630.102.4 23RE .txe L 1:1 0005 07
983.102.4 23RE .txe/.tni R 1:1 0005 07
093.102.4 23RE .txe/.tni L 1:1 0005 07
Hyundai Wia / KIA SKT 210S/SY
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt , doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
078.002.4 23RE .txe 1:1 0005 07
578.002.4 23RE .txe/.tni 1:1 0005 07
KühlungCoolant
KühlungCoolant
KühlungCoolant
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: HUNDAI HIT250SY und andere.
* These tool holder are also suitable for following turning &milling centers: HUNDAI HIT250SY and others.
A 13.2
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
59
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
593.102.4 23RE .txe 1:1 0005 04 ––
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
643.102.4 23RE .txe R 1:1 0005 07
743.102.4 23RE .txe L 1:1 0005 07
193.102.4 23RE .txe/.tni R 1:1 0005 07
293.102.4 23RE .txe/.tni L 1:1 0005 07
Hyundai Wia / KIA SKT 250S/SY
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt , doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
078.002.4 23RE .txe 1:1 0005 07
578.002.4 23RE .txe/.tni 1:1 0005 07
KühlungCoolant
KühlungCoolant
KühlungCoolant
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: BÖHRINGER NG180/200 und andere.
* These tool holder are also suitable for following turning &milling centers: BÖHRINGER NG180/200 and others.
A 13.3
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
60
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
015.270.7 52RE .txe 1:1 0006 52
008.270.7 52RE .txe/.tni 1:1 0006 52
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
591.370.7 52RE .txe 1:1 0006 52 ––
Miyano / GoodwaySchaft / Shank 45*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
Bohr-Fräskopf abgewinkelt , doppelseitig / Drilling Milling Head Angular, Double Ended
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
505.270.7 52RE .txe 1:1 0006 52
597.270.7 52RE .txe/.tni 1:1 0006 52
KühlungCoolant
KühlungCoolant
KühlungCoolant
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: ABX 51/64, BNE 64 neu und andere.
* These tool holder are also suitable for following turning &milling centers: ABX 51/64, BNE 64 new and others.
A 14.1
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
61
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
62A 14.2
Miyano BNA-34S / 42SSchaft / Shank 38
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
242.570.7 02RE .txe 1:1 0006 52
542.570.7 02RE .txe/.tni 1:1 0006 52
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
072.570.7 02RE .txe 1:1 0006 02
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
312.570.7 02RE .txe R/L 1:1 0006 52
802.570.7 02RE .txe/.tni R/L 1:1 0006 52
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
572.570.7 61RE .txe R/L 1:1 0006 6
092.570.7 61RE .txe/.tni R/L 1:1 0006 6
KühlungCoolant
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
Bohr-Fräskopf abginkelt, doppelseitig / Drilling Milling Head Angular, Double Ended
Bohr-Fräskopf abgew., links-rechts, doppelt / Drill.- Mill. Head Angular, Left-Right, Double
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
058.002.4 23RE .txe 1:1 0056 05
038.002.4 23RE .txe/.tni 1:1 0056 05
EMAG VL3 / VL5
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, zurückgesetzt / Drilling Milling Head Angular, Offset
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
138.002.4 23RE .txe 1:1 0056 08
328.002.4 23RE .txe/.tni 1:1 0056 08
KühlungCoolant
KühlungCoolant
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: EMAG VL3/VL5 und andere.
* These tool holder are also suitable for following turning &milling centers: EMAG VL3/VL5 and others.
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
A 15.1
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
63
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
64
EMAG VT 2 / VL 2
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
565.570.7 52RE .txe 1:1 0006 06
036.570.7 52RE .txe/.tni 1:1 0006 06
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
045.570.7 52RE .txe 1:1 0006 06
026.570.7 52RE .txe/.tni 1:1 0006 06
KühlungCoolant
KühlungCoolant
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
A 15.2
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
479.370.7 02RE .txe 1:1 0006 52
579.370.7 02RE .txe/.tni 1:1 0006 52
GoodwaySchaft / Shank 42*
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
869.370.7 02RE .txe 1:1 0006 52
079.370.7 02RE .txe/.tni 1:1 0006 52
KühlungCoolant
KühlungCoolant
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: GTS 150 / GLS 150 / TS 100 u. andere.
* These tool holder are also suitable for following turning &milling centers: GTS 150 / GLS 150 / TS 100 and others.
A 16.165
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
66A 16.2
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
* Diese Werkzeuge werden auch auf folgenden Dreh- undFräszentren eingesetzt: GTS 200 XY und andere.
* These tool holder are also suitable for following turning &milling centers: GTS 200 XY and others.
GoodwaySchaft / Shank 63*
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Bohr-Fräskopf abgewinkelt, links-rechts / Drilling Milling Head Angular, Left-Right
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
529.570.7 23RE .txe 1:1 0006 07
069.570.7 23RE .txe/.tni 1:1 0006 07
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
559.570.7 23RE .txe 1:1 0006 07
579.570.7 23RE .txe/.tni 1:1 0006 07
KühlungCoolant
...............................................................................................................................................................................................................................................................................................................
.........EPPINGER
.rN-lekitrA.oNtraP
.znnapStelloC
noisreV i nxam
Mmn
.rherDnoitatoR
019.002.3 52RE .txe R 1:1 0006 04
509.002.3 52RE .txe L 1:1 0006 04
119.002.3 52RE .txe/.tni R 1:1 0006 04
609.002.3 52RE .txe/.tni L 1:1 0006 04
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
639.002.3 52RE .txe/.tni 1:1 0006 04
KühlungCoolant
.rN-lekitrA.oNtraP
.znnapStelloC
i nxam
Mmn
.rherDnoitatoR
458.002.3 52RE .txe 1:1 0006 04
A 17.167
Katalog PZub./Acc.
Z 2.1Zub./Acc.
Z 3.3Zub./Acc.Z 9.1 · 9.3
Zub./Acc.Z 15.1·15.3
Bohr-Fräskopf gerade / Drilling Milling Head Straight
Here a selection of PRECI FLEX Systemtools. Further rotarytool holder, as well as static tool holder, boring bar holder, cut-off tool holder etc., detail documents on request.
Hier eine Auswahl von PRECI-FLEX-Systemwerkzeugen. Wei-tere angetriebene Werkzeuge, sowie feste Werkzeughalter, Bohr-stangenhalter, Abstechhalter usw., Detailunterlagen anfordern.
Traub TNX 65/42
Bohr-Fräskopf abgewinkelt / Drilling Milling Head Angular
KühlungCoolant
KühlungCoolant
...............................................................................................................................................................................................................................................................................................................
......... EPPINGER
68
ESA Eppinger GmbH · Breitwiesen 2-8 · D-73770 DenkendorfTelefon + 49 (0) 711 934 934-0 · Telefax + 49 (0) 711 934 934-1E-Mail: [email protected] · Internet: http://www.eppinger.de
EPPINGER
12
-20
12
MA
AH
S· N
I ED
ER
NH
AL
L