2
Datenblatt / Data sheet C6 A modul 180° 130B11-E Produktbeschreibung Product specification Bestell-Nr. / Part no. Abbildungen / Illustration 5.7 19.1 3.4 1 14.7 36 Maßzeichnung / Dimensions Einbauausschnitt / Cut out Seite/Page 1/2 • modulare Anschlusseinheit RJ45 • GHMT Cat.6 A re-embedded PVP zertifiziert • Cat.6 A Komponentenprüfung nach ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) und IEC 60603-7-51 Ed.1 (12/2008), GHMT zertifiziert • Einhaltung der Klasse E A bis 500 MHz nach ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 • getestet: Komponente bis 600 MHz, Link bis 800 MHz • für 10 GBit Ethernet (IEEE 802.3an) • geeignet für Power over Ethernet (PoE, PoE plus und UPoE) • montagefreundlicher Anschluss von Datenleitungen AWG 24/1 - 22/1 (eindrähtig) und AWG 26/7 bis 22/7 (mehrdrähtig) an IDC-Schneidklemmen • intelligentes Kabelmanagement im Ladestück, auch für stark verdrillte Leitungen geeignet • Kennzeichnung der Adernbelegung T568A und T568B direkt auf dem Ladestück • robustes, einteiliges und wieder verwendbares Modulgehäuse aus Zinkdruckguss, veredelt • Montage ohne Spezialwerkzeug, Zugentlastung per Rastclip direkt am Ladestück • Einbauform: Modul, Kabelzuführung 180° • modular termination unit RJ45 • certified to GHMT Cat.6 A re-embedded PVP • component testing for Cat.6 A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT • compliance with class E A up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 • tested: component up to 600 MHz, link up to 800 MHz • for 10 GBit Ethernet (IEEE 802.3an) • suitable for Power over Ethernet (PoE, PoE plus and UPoE) • easy to install connection of data lines AWG 24/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC) • intelligent cable management in stuffer cap - also suitable for heavily twisted cables • conductor assignment to T568A and T568B is directly printed on the stuffer cap • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools; strain relief directly snapped on to stuffer cap • mounting version: module, 180° cable feed METZ CONNECT | Im Tal 2| 78176 Blumberg | Germany | www.metz-connect.com Phone +49 7702 533-0 | Fax +49 7702 533-433 Vertrieb durch / Distributed by: RIA CONNECT GmbH und / and BTR NETCOM GmbH Montageanleitung siehe / Mounting instruction see www.metz-connect.com © 2013 METZ CONNECT - Technische Änderungen vorbehalten! Subject to modifications! 2013-06-5

Datenblatt / Data sheet Seite/Page 1/2 · TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT • compliance with class EA up to 500 MHz ... • intelligent

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Datenblatt / Data sheet Seite/Page 1/2 · TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT • compliance with class EA up to 500 MHz ... • intelligent

Datenblatt / Data sheetC6Amodul 180°

130B11-E

Produktbeschreibung Product specification

Bestell-Nr. / Part no.

Abbildungen / Illustration

5.7

19.1

3.4

1

14.7

36

Maßzeichnung / Dimensions Einbauausschnitt / Cut out

Seite/Page 1/2

•modulareAnschlusseinheitRJ45•GHMTCat.6Are-embeddedPVPzertifiziert•Cat.6AKomponentenprüfungnachISO/IEC11801 Ed.2.2:2011-06,DINEN50173-1:2011-09, TIA/EIA-568-C.2(2009-08)undIEC60603-7-51Ed.1(12/2008), GHMTzertifiziert•EinhaltungderKlasseEAbis500MHz nachISO/IEC11801Ed.2.2:2011-06,DINEN50173-1:2011-09•getestet:Komponentebis600MHz,Linkbis800MHz•für10GBitEthernet(IEEE802.3an)•geeignetfürPoweroverEthernet(PoE,PoEplusundUPoE)•montagefreundlicherAnschlussvonDatenleitungen AWG24/1-22/1(eindrähtig)undAWG26/7bis22/7 (mehrdrähtig)anIDC-Schneidklemmen•intelligentesKabelmanagementimLadestück,auchfürstark verdrillteLeitungengeeignet•KennzeichnungderAdernbelegungT568AundT568B direktaufdemLadestück•robustes,einteiligesundwiederverwendbaresModulgehäuse ausZinkdruckguss,veredelt•MontageohneSpezialwerkzeug,ZugentlastungperRastclip direktamLadestück•Einbauform:Modul,Kabelzuführung180°

•modularterminationunitRJ45•certifiedtoGHMTCat.6Are-embeddedPVP•componenttestingforCat.6AtoISO/IEC11801 Ed.2.2:2011-06,DINEN50173-1:2011-09, TIA/EIA-568-C.2(2009-08)andIEC60603-7-51Ed.1(12/2008), certifiedtoGHMT•compliancewithclassEAupto500MHz toISO/IEC11801Ed.2.2:2011-06,DINEN50173-1:2011-09•tested:componentupto600MHz,linkupto800MHz•for10GBitEthernet(IEEE802.3an)•suitableforPoweroverEthernet(PoE,PoEplusandUPoE)•easytoinstallconnectionofdatalinesAWG24/1to22/1 (solidwire)andAWG26/7to22/7(strandedwire)to insulationdisplacementconnectors(IDC)•intelligentcablemanagementinstuffercap-alsosuitablefor heavilytwistedcables•conductorassignmenttoT568AandT568Bisdirectlyprinted onthestuffercap•solid,one-pieceandreusablemodulehousingrefinedwith zincdie-casting•mountingwithoutspecialtools;strainreliefdirectlysnapped ontostuffercap•mountingversion:module,180°cablefeed

METZCONNECT | Im Tal 2| 78176 Blumberg | Germany | www.metz-connect.com Phone +49 7702 533-0 | Fax +49 7702 533-433Vertrieb durch / Distributed by: RIACONNECTGmbH und / and BTRNETCOMGmbH Montageanleitung siehe / Mounting instruction see www.metz-connect.com

© 2

013

MET

Z CO

NN

ECT

- Te

chni

sche

Änd

erun

gen

vorb

ehal

ten!

Sub

ject

to

mod

ifica

tions

!

2013-06-5

Page 2: Datenblatt / Data sheet Seite/Page 1/2 · TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT • compliance with class EA up to 500 MHz ... • intelligent

Technische Daten Technical Data

Datenblatt / Data sheet

C6Amodul 180°130B11-E

Bestell-Nr. / Part no.

Seite/Page 2/2

Allgemeine Daten General DataAbmessungen(LxBxH) 36x14.7x23.5mm Dimensions(LxWxH)Steckverbinder IEC60603-7-51Ed.1 ConnectorKennzeichnungderAdernfarben TIA/EIA586A,TIA/EIA586B WirecoloridentificationEinbauform Modul DesignKabelzuführung 180° CablefeedingSchirmanschluss(großflächig) 360° Shieldconnection(largesized)

Mechanische Eigenschaften Mechanical propertiesMaterial Material Schirmgehäuse GD-Zn Shieldhousing Ladestück PA6.6UL94V0 Stuffercap Zugentlastung PA6.6UL94V0 Cablestrainrelief Kontaktfedern FeNiCo Contactsprings Kontaktoberfläche Au0.75µm ContactsurfaceSteckkraft <30N PluginforceLebensdauerKontakteSteckzyklenmit Endurancecontacts(plug-incycles) RJ-SteckernnachIEC60603-7-51Ed.1 >2500 withRJplugsperIEC60603-7-51Ed.1AbmessungenderRJ-Buchse nachIEC60603-7Ed.1 DimensionsoftheJackAdernanschluss IDC-Schneidklemmen Wireconnection IDCdisplacementterminationconnector eindrähtig Ø0.4–0.65mm,AWG24/1–22/1 solidwire mehrdrähtig Ø0.48–0.76mm,AWG26/7–22/7 strandedwire

Klimatische Eigenschaften Climatic propertiesKlimatischeKategorie 40/70/21–IEC512 Climaticcategory PrüfungNr. 11a,11i,11j,11m Testingsno.

Elektrische Eigenschaften Electrical propertiesNennstrom max.1A NominalcurrentNennspannung max.50VDC NominalvoltageSpannungsfestigkeit max.1000VDCIEC60603-7Ed.1 DielectricstrengthKontaktwiderstand <20mW ContactresistantDurchgangswiderstand <200mW TransferimpedanceIsolationswiderstand >500MW InsulationresistanceÜbertragungstechnischeParameter Transmissionparameters Kategorie6A(Cat.6A)gemäß ISO/IEC11801Ed.2.2:2011-06 Category6A(Cat.6A)per KlasseEAgemäß ISO/IEC11801Ed.2.2:2011-06 ClassEAper Kategorie6A(Cat.6A)gemäß ANSI/TIA/EIA-568-B.2-10 Category6A(Cat.6A)per 10GigabitEthernetgemäß IEEE802.3an 10GigabitEthernetper EMVgemäß EN55022,EN50082TI EMCper PoEgemäß IEEE802.3af PoEper PoE+gemäß IEEE802.3at PoE+per

METZCONNECT | Im Tal 2| 78176 Blumberg | Germany | www.metz-connect.com Phone +49 7702 533-0 | Fax +49 7702 533-433Vertrieb durch / Distributed by: RIACONNECTGmbH und / and BTRNETCOMGmbH Montageanleitung siehe / Mounting instruction see www.metz-connect.com

© 2

013

MET

Z CO

NN

ECT

- Te

chni

sche

Änd

erun

gen

vorb

ehal

ten!

Sub

ject

to

mod

ifica

tions

!

2013-06-5