Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
EG-Baumusterprüfbescheinigung Certificate of EG type examination
Nr.: TÜV-A-MHF/MG13-06962A
gemäß Richtlinie 2006/42/EG (Maschinen)
according to the Directive 2006142/EC (Machinery)
T� AUSTRIA
Auftraggeber: Sigmatek GmbH & Co. KG Sigmatekstraße 1
Hersteller: Sigmatek GmbH & Co. KG Applicant: Manufacturer: Sigmatekstraße 1
5112 Lamprechtshausen Österreich/ Austria
5112 Lamprechtshausen Österreich/ Austria
Produkt: Zubehör: Gemäß Anhang Product:
,S-DIAS 1/0 System mit internem Bus' ,S-DIAS 110 System with internal Bus' Accessories: According to annex
Typ: Type:
Beschreibung: Description:
Logikeinheiten für Sicherheitsfunktionen Logic units to ensure safety functions
Sicherheitsbezogenes Programmierbares 1/0-System Safety related programmable 110-system
Prüfgrundlagen: Richtlinie 2006/42/EG idgF. und Normen: EN ISO 13849, EN / IEC 62061 Tested according to: Directive 2006142/EC in current version and standards EN ISO 13849, EN / IEC 62061
(Anwendung gemäß Risikobeurteilung / application according to risk assessment)
Bemerkungen: Remarks:
Produkte und Sicherheitskennwerte gemäß Anhang. Products and safety parameters according to annex.
Hiermit bestätigt die TÜV AUSTRIA SERVICES GMBH als Benannte Stelle (ID-Nr. 0408) , dass das oben angeführte Produkt den grundlegenden Sicherheits-Anforderungen der Richtlinie 2006/42/EG entspricht. Grundlage dieser Bescheinigung ist das zur Prüfung vorgelegte Prüfmuster und die technische Dokumentation. Gemäß Artikel 5 und Anhang III ist am Produkt die CE-Kennzeichnung vorgesehen.
Hereby TÜV AUSTRIA SERVICES GMBH certifies as Notified Body (/D-No 0408), that the above mentioned product meets the essential safety requirements of the Directive 2006142/EC. The certificate is based on the fest specimen and the technical documentation subjected to the fest. According to Article 5 and annex III the CE mark is foreseen to be affixed on the product.
Prüfbericht: 13-00055A MFO SIGMATEK SDIAS_int_Bus PB Test report: 13-00055A MFO SIGMA TEK SDIAS_int_Bus PB
14.12.2018 Datum Date
Dipl.-Ing. (FH) Matthias Forkl Benannte Stelle 0408
Notified Body 0408
30.11.2023 Gültig bis
Valid till
Auszugsweise Vervielfältigung nur mit Genehmigung der TÜV AUSTRIA SERVICES GMBH gestattet. Duplication of this document in parts is subject to the approval by TÜV AUSTRIA SERVICES GMBH.
FM-INE-AS-MRL-01 OOb
Revision ·02 vom 12.01.2017
MG13-06962A MFO SIGMATEK_SDIAS_intBus_BB.docx
005408-17-4
TÜV AUSTRIA SERVICES GMBH lndustry and Energy
Anlagen- und Maschinensicherheit
Deutschstraße 10 A-1230 Wien
Tel.: +43 / 5 0454-6202 http://www.tuv.at
Gültigkeit von EG-Baumusterprüfbescheinigungen
1. Erlöschen von Bescheinigungen
Eine Bescheinigung wird auch ohne besondere Mitteilung der TÜV AUSTRIA SERVICES GMBH ungültig, wenn die auf der Bescheinigung angegebene Gültigkeitsdauer abgelaufen ist.
2. Einschränkung, Aussetzung, Ungültigerklärung, Rückzug von Bescheinigungen
Die Bescheinigungen können von der Notifizierten Stelle (TÜV AUSTRIA SERVICES GMBH) mit sofortiger Wirkung eingeschränkt, ausgesetzt oder für ungültig erklärt und zurückgezogen werden, wenn: (a) das bescheinigte Produkt nicht mehr dem genehmigten Muster entspricht, (b) Produkte für Endbenutzer oder Drltte eine Gefährdung darstellen, (c) zum Zeitpunkt der Prüfung Tatsachen nicht oder nicht richtig gesehen und beurteilt worden sind oder auch nicht erkennbar
waren, die einer positiven Bewertung entgegengestanden hätten - hierzu gehört z. B. auch eine fehlerhafte Kategorisierung von Produkten in bestimmte Risikoklassen oder die Einordnung nach Verwendungszweckarten und zwar auch aufgrund eines von der Notifizierten Stelle (TÜV AUSTRIA SERVICES GMBH) zu verantwortenden Fehlers oder Mangels bei der Prüfung,
(d) bei wiederkehrenden Überwachungen, bei Marktkontrollen oder sonst sich nachträglich herausstellenden Produkt- oder Systemmängel, die nicht vom Bescheinigungsinhaber in einer angemessenen Frist abgestellt werden,
(e) der Bescheinigungsinhaber die wiederkehrenden Überwachungstätigkeiten der Notifizierten Stelle (TÜV AUSTRIA SERVICES GMBH) nicht durchführen lässt oder die ordnungsgemäße Durchführung behindert oder einschränkt,
(f) Bescheinigungen oder Kopien von Bescheinigungen geändert und damit gefälscht worden sind, (g) irreführende oder anderweitig unzulässige Werbung mit den Bescheinigungen betrieben wird, (h) fällige Entgelte für die Bescheinigungen und/oder Produkt-Prüfung vom Bescheinigungsinhaber nicht in der gestellten
Frist entrichtet werden.
3. Verfahren zum Bescheinigungs-Entzug
Die Bescheinigung ist im Falle der Ungültigkeitserklärung unverzüglich im Original an die TÜV AUSTRIA SERVICES GMBH zurückzugeben. Der Notifizierten Stelle {TÜV AUSTRIA SERVICES GMBH) wird die Veröffentlichung von Einschränkungen, Aussetzungen, Ungültigkeitserklärungen und Zurückziehungen sowie Löschungen von Bescheinigungen vom Auftraggeber gestattet.
Validity of EC Type Examination Certificates
1. Expiry of certificates
A certificate expires even without special notice by TÜV AUSTRIA SERVICES GMBH when the expiry date specified on the product certificate is reached.
2. Restriction, suspension, cancellation, withdrawal of certificates
Certificates can be restricted, suspended or cancelled and withdrawn with immediate effect by the Notified Body (TÜV AUSTRIA SERVICES GMBH) if: (a) the certified product no longer corresponds to the approved type, (b) products represent a risk for end users or third parties, ( c) facts precluding positive certification were not correctly seen or assessed at the time of the test or were not recognizable - this
also includes e.g. incorrect categorization of products in defined risk classes or the classification according to types of intended uses, also if this is due to an error or fault of the certification for which the Notified Body (TÜV AUSTRIA SERVICES GMBH) is responsible,
(d) defects of the product or of the system are detected in the course of repeated tests, market inspections or in any other way at a later moment and are not eliminated within a reasonable period by the holder of the certificate,
(e) the holder of the certificate omits to have the repeated inspection carried out by the Notified Body (TÜV AUSTRIA SERVICES GMBH) or impedes or restricts its execution in due form,
(f) certificates or copies of certificates were modified and therefore forged, (g) misleading or otherwise inadmissible promotion is made with product certificates, (h) due fees for the certification and/or product test are not paid by the holder of the certificate within the defined period.
3. Certificate withdrawal procedure
lf the certificate is declared invalid, its original copy has to be returned to the Notified Body (TÜV AUSTRIA SERVICES GMBH). The customer authorizes the Notified Body (TÜV AUSTRIA SERVICES GMBH) to publish restrictions, suspensions, cancellations and withdrawals as weil as annulments of certificates.
MG13-06962A MFO SIGMATEK_SDIAS_intßus_BB.docx
ecliti erung 4
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHFIMG/13-06962A � -Revision 13
vom / of: 16.10.2020
ISo;IE C 1701\l
Gemäß dem Prüfbericht 13-00055A MFO SIGMATEK SDIAS_int_Bus PB Rev1 .13 umfasst das oben
genannte Zertifikat die folgenden Produkte:
Based on the test report 13-00055A MFO SIGMA TEK SDIAS_int_Bus PB Rev1. 13 includes the above
mentioned certificate the following products:
CPU Modul
CPU Module
SCP 011
Version
Version
501.01.01
501.02.01
501.03.01
501.04.01
501.05.01
501.06.01
501.07.01
501.08.01
501.09.01
501.10.01
501.11.01
501.12.01
501.13.01
502.13.01
Sicherheitskennwerte
Safety Parameter
PFHo = 1,4E-10 (1/h)
SFF = 99%
MTTFo = 2689 Jahre
DC = 99%
bei 55°C Umgebungstemperatur/ at 55°C ambient temperature
PFHo = 1,7E-10 (1/h)
SFF = 99%
MTTFo = 2243 Jahre
DC =99%
bei 60°C Umgebungstemperatur/ at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN //EG 62061.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at 13-06962A MFO SIGMA TEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
Seite 1 von 13
Page 1 of 13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 -0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
e<l'1tierung 4
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHFIMG/13-06962A � V
CPU Modul
CPU Module
SCP 111
Revision 13
vom I ot. 16. 10.2020
Version
Version
Sicherheitskennwerte
Safety Parameter
PFHo = 1,4E-10 (1/h)
SFF = 99%
MTTFo = 2689 Jahre
DC =99%
1so11Ec noio
501.01.01
501.02.01
501.03.01
501.04.01
501.05.01
501.06.01
501.07.01
501.08.01
501.09.01
501.10.01
501.11.01
501.12.01
501.13.01
501.14.01
502.14.01
bei 55°C Umgebungstemperatur/ at 55°C ambient temperature
PFHo = 1,7E-10 (1/h)
SFF = 99%
MTTFo = 2243 Jahre
DC = 99%
bei 60°C Umgebungstemperatur/ at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For app/ications up to PL e, category 4 according to EN ISO 13849-1 or until a S/L 3 according to
EN //EG 62061.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-12 30 Wien, Deutschstraße 10
http://www.tuv.at
13-06962A MFO SIGMATEK_SOIAS_int_Bus Z-Anhang_Rev13.doc
Seite 2 von 1 3
Page 2 of 1 3
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
editierung 'i
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHFIMG/13-06962A � V
Eingangsmodul
Input Module
Safe Digital Input Module
SDI 101
1so11Ec 111)1\l
Revision 13
vom / of: 16.10.2020
Version
Version
S01.01.01
S02.01.01
S03.01.01
Sicherheitskennwerte
Safety Parameter
including CPU Module SCP 011 or SCP 111
einkanalige Verwendung / single channel use
PFHo = 1,7E-09 (1/h)
SFF = 99%
MTTFo = 1843 Jahre
DC = 97%
zweikanalige Verwendung / dual channel use
PFHo = 1,5E-09 (1/h)
SFF = 99%
MTTFo = 2318 Jahre
DC = 97%
bei 55°C Umgebungstemperatur I at 55°C ambient temperature
einkanalige Verwendung / single channel use
PFHo = 2, 1 E-09 (1/h)
SFF = 99%
MTTFo = 1552 Jahre
DC = 97%
zweikanalige Verwendung / dual channel use
PFHo = 1,9E-09 (1/h)
SFF = 99%
MTTFo = 1928 Jahre
DC =97%
bei 60°C Umgebungstemperatur/ at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
Bei einkanaliger Verwendung gilt eingeschränkt PL d, Kategorie 2. Aufgrund des hohen SFF>99% bleibt SIL 3
erhalten.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN //EG 62061. The limitation in application with single channel use is PL d, category 2. Due to the high
SFF>99% SIL 3 is maintained.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
13-06962A MFO S/GMATEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
Seite 3 von 13
Page 3 of 13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40 , D-70 794 Filderstadt
Tel.: +49 (0 )711 722 336 - 0
Fax: +49 (0 )711 722 336 - 11
Email: [email protected]
eo\tierung 4
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EC type examination No. TÜV-A-MHFIMG/13-06962A �� V
Ausgangsmodul
Output Module
Safe Digital Output Module
STO 081
1so11 Ec 11010
Revision 13
vom / ot. 16.10.2020
Version Sicherheitskennwerte
Safety Parameter Version
including CPU Module SCP 011 or SCP 111
PFHo = 1,0E-09 (11h)
SFF = 99%
MTTFo = 2053 Jahre
DC =99%
S01.01.01 bei 55°C Umgebungstemperatur I at 55°C ambient temperature
S02.01.01 PFHo = 1,3E-10 (11h)
SFF = 99%
MTTFo = 1718 Jahre
DC =99%
bei 60°C Umgebungstemperatur I at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to PL e,
EN / IEC 62061.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
category 4 according to EN ISO 13849-1
Seite 4 von 13
Page 4 of 13 13-06962A MFO SIGMATEK_SOIAS_int_Bus Z-Anhang_Rev13.doc
or until a SIL 3 according to
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
editierung 4
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHF/MG/13-06962A �lt; V
Absolutwertgeber Modul
Absolute Encoder Module
Safe Digital Input Module
SSI 021
IS0;1Ec 17010
Revision 13
vom I of: 16.10.2020
Version
Version
S01.01.01
S01.02.01
S01.03.01
S02.03.01
S03.03.01
Sicherheitskennwerte
Safety Parameter
including CPU Module SCP 011 or SCP 111
einkanalige Verwendung I single channel use
PFHo = 2,4E-09 (1/h)
SFF = 95%
MTTFo = 660 Jahre
DC = 85%
zweikanalige Verwendung / dual channel use
PFHo = 2,7E-09 (1/h)
SFF =99%
MTTFo = 677 Jahre
DC = 99%
bei 55°C Umgebungstemperatur I at 55°C ambient temperature
einkanalige Verwendung I single channel use
PFHo = 3,0E-09 (1/h)
SFF = 95%
MTTFo = 566 Jahre
DC = 85%
zweikanalige Verwendung I dual channel use
PFHo = 3,2E-09 (1/h)
SFF = 99%
MTTFo = 579 Jahre
DC =99%
bei 60°C Umgebungstemperatur/ at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
Bei einkanaliger Verwendung gilt eingeschränkt PL d, Kategorie 2, beziehungsweise SIL 2.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a S/L 3 according to
EN / IEC 62061. The limitation in application with single channel use is PL d, category 2, respectively SIL 2.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
13-06962A MFO SIGMATEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
Seite 5 von 13
Page 5of13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 ( 0)711 722 336 -11
Email: [email protected]
editi erung '1
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHFIMG/13-06962A � V
Relais Modul
Relays Module
Safe Digital Relays Module
SRO 021
1so11Ec i 101.0
Revision 13
vom / of 16.10.2020
Version Sicherheitskennwerte
Version Safety Parameter
including CPU Module SCP 011 or SCP 111
PFHo = 9,7E-09 (1/h)
SFF = 99%
MTTFo = 240 Jahre
DC = 98% S01.01.01
S02.01.01 bei 55°C Umgebungstemperatur I at 55°C ambient temperature
S03.01.01 PFHo = 1,0E-8 (1/h)
SFF = 99%
MTTFo = 233 Jahre
DC = 98%
bei 60°C Umgebungstemperatur/ at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to Ple, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN //EG 62061.
Anmerkung: Die oben genannten Sicherheitskennwerte beruhen auf der Annahme, dass das Ausgangsrelais mit
25.000 Schaltzyklen pro Jahr (nop) betätigt wird.
Remark: The above safety parameters are based an an assumed operation of the output relay with 25.000
switching cycles per year (nop).
Schrittmotor-Endstufe Version Sicherheitskennwerte
Stepper Motor Drive Version Safety Parameter
PFHo = 4,9E-08 (1/h)
SFF = 91% ST 151 (STO) S01.00.01
MTTFo = 3498 Jahre
DC = 99%
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to PL e,
EN //EG 62061.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
category 4 according to EN ISO 13849-1
Seite 6 von 13
Page 6 of13 13-06962A MFO S/GMATEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
or until a S/L 3 according to
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
eo'1tierung "i
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EC type examination No. TÜV-A-MHF/MG/13-06962A � V
Achsmodul
Axis Module
OC061-xx (STO)
OC061-1x (STO)
DC062-xx (STO)
Revision 13
vom / of: 16.10.2020
Version
Version
S01.01
S01.02
S01.03
S01.01
S01.02
S01.03
S01.04
S01.01
S01.02
S01.03
S01.04
Sicherheitskennwerte
Safety Parameter
PFHo = 3,9E-10 (1/h)
SFF = 99%
MTTFo = 6524 Jahre
oc =96%
1so11Ec 1701°
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a S/L 3 according to
EN //EG 62061.
Drive-Modul
Drive Module
DC 101 (STO)
DC 102 (STO)
Version
Version
S01.01.00
S01.01.00
Sicherheitskennwerte
Safety Parameter
PFHo = 1,9E-09 (1/h)
SFF = 99%
MTTFo = 1194 Jahre
oc = 98%
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN //EG 62061.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
13-06962A MFO SIGMATEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
Seite 7 von 13
Page 7 of 13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
{ eclitieru n g Au
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHF/MG/13-06962A � V
Eingangs- Ausgangsmodul
Digital Input / Output Module
Safe Digital Input Module
SDM 081
Safe Digital Output Module
SDM 081
1so11Ec no10
Revision 13
vom / of: 16.10.2020
Version
Version
S01.01.01
S02.01.01
S03.01.01
Sicherheitskennwerte
Safety Parameter
including CPU Module SCP 011 or SCP 111
einkanalige Verwendung / single channel use
PFHo = 1,7E-09 {11h)
SFF = 99%
MTTFo = 1843 Jahre
DC = 97% zweikanalige Verwendung/ dual channel use
PFHo =6,2E-10 {11h)
SFF = 99%
MTTFo = 2069 Jahre
DC = 97%
bei 55°C Umgebungstemperatur I at 55°C ambient temperature
einkanalige Verwendung / single channel use
PFHo = 2, 1 E-09 {11h)
SFF = 99%
MTTFo = 1552 Jahre
DC =97%
zweikanalige Verwendung / dual channel use PFHo = 7,6E-10 {1/h)
SFF = 99%
MTTFo = 1753 Jahre
DC = 97%
bei 60°C Umgebungstemperatur/ at 60°C ambient temperature
PFHo = 1,7E-09 {1/h)
SFF = 99%
MTTFo = 1915 Jahre
DC =98%
bei 55°C Umgebungstemperatur I at 55°C ambient temperature
PFHo = 1,9E-09 {11h)
SFF =99%
MTTFo = 1680 Jahre
DC =98%
bei 6D°C Umgebungstemperatur I at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN l IEC 62061.
Für die Eingänge gilt bei einkanaliger Verwendung eingeschränkt PL d, Kategorie 2. Aufgrund des hohen
SFF>99% bleibt SIL 3 erhalten.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN //EG 62061. For the inputs with single channel app/ication, the limitation is PL d, category 2. Due to the high
SFF>99% SIL 3 is maintained.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at 13-06962A MFO S/GMATEK_SD/AS_int_Bus Z-Anhang_Rev13.doc
Seite 8 von 13
Page 8of13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-7 0794 Filderstadt
Tel.: +49 (0) 711 7 22 336 - 0
Fax: +49 (0)7 11 7 22 336 - 11
Email: [email protected]
editierung '1
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EC type examination No. TÜV-A-MHFIMG/13-06962A � V
Inkrementalgeber Modul
lncremental Encoder Module
Safe Digital Input Module
SNC 021
1so11Ec 171y1\l
Revision 13
vom / ot. 16.10.2020
Version
Version
S02.02.02
S02.03.02
S02.04.03
S03.04.03
Sicherheitskennwerte
Safety Parameter
including CPU Module SCP 011 or SCP 111
einkanalige Verwendung / single channel use
PFHo = 3,4E-09 (1/h}
SFF = 99%
MTTFo = 806 Jahre
DC = 97%
zweikanalige Verwendung / dual channel use
PFHo = 3,5E-09 (1/h}
SFF = 99%
MTTFo = 581 Jahre
DC =99%
bei 50'C Umgebungstemperatur I at 50'C ambient temperature
einkanalige Verwendung / single channel use
PFHo = 4,3E-09 (1/h}
SFF = 99%
MTTFo = 634 Jahre
DC =97%
zweikanalige Verwendung / dual channel use
PFHo = 4,3E-09 (1/h}
SFF = 99%
MTTFo = 457 Jahre
DC = 99%
bei 60'C Umgebungstemperatur I at 60'C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
Bei einkanaliger Verwendung gilt eingeschränkt PL d, Kategorie 2. Aufgrund des hohen SFF>99% bleibt SIL 3
erhalten.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN //EG 62061. The limitation in application with single channel use is PL d, category 2. Oue to the high
SFF>99% S/L 3 is maintained.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
13-06962A MFO SIGMA TEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
Seite 9 von 13
Page 9 of 13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
eoitierung 4
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EC type examination No. TÜV-A-MHF/MG/13-06962A � V
Eingangsmodul
Input Module
Safe Digital Input Module
SIB 061
ISO// EC 1701()
Revision 13
vom I of: 16.10.2020
Version
Version
S01.01
Sicherheitskennwerte
Safety Parameter
including CPU Module SCP 011 or SCP 111
einkanalige Verwendung / single channel use
PFHo = 1,2E-09 (1/h)
SFF = 99%
MTTFo = 839 Jahre
DC = 98%
zweikanalige Verwendung / dual channel use
PFHo = 1,4E-09 (11h)
SFF = 99%
MTTFo = 854 Jahre
DC = 99%
bei 55°C Umgebungstemperatur/ at 55°C ambient temperature
einkanalige Verwendung / single channel use
PFHo = 1,2E-09 (11h)
SFF = 99%
MTTFo = 790 Jahre
DC = 98%
zweikanalige Verwendung / dual channel use
PFHo = 1,4E-09 (11h)
SFF =99%
MTTFo = 804 Jahre
DC = 99%
bei 60°C Umgebungstemperatur I at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061. Bei einkanaliger Verwendung gilt eingeschränkt PL d, Kategorie 2. Aufgrund des hohen SFF>99% bleibt SIL 3
erhalten.
For applications up to PL e, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN / IEC 62061. The limitation in application with single channel use is PL d, category 2. Due to the high
SFF>99% S/L 3 is maintained.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
13-06962A MFO SIGMATEK_SOIAS_int_Bus Z-Anhang_Rev13.doc
Seite 1 0 von 13
Page 10 of 13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
editi erung ,q
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHFIMG/13-06962A � V
Relais Modul
Relays Module
Safe Digital Relays Module
SRO 022
1so11Ec no1°
Revision 13
vom / of 16.10.2020
Version Sicherheitskennwerte
Version Safety Parameter
including CPU Module SCP 011 or SCP 111
PFHo = 9,7E-09 (11h)
SFF = 99%
MTTFo = 240 Jahre
DC =98%
501.00.01 bei 55°C Umgebungstemperatur I at 55°C ambient temperature
PFHo = 1,0E-8 (11h)
SFF = 99%
MTTFo = 233 Jahre
DC =98%
bei 60°C Umgebungstemperatur/ at 60°C ambient temperature
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to PLe, category 4 according to EN ISO 13849-1 or until a SIL 3 according to
EN / IEC 62061.
Anmerkung: Die oben genannten Sicherheitskennwerte beruhen auf der Annahme, dass das Ausgangsrelais mit
25.000 Schaltzyklen pro Jahr (nop) betätigt wird.
Remark: The above safety parameters are based an an assumed operation of the output relay with 25.000
switching cyc/es per year (nop).
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
13-06962A MFO SIGMATEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
Seite 11 von 13
Page 11 of 13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHFIMG/13-06962A
Produkt
Product
LASAL Safety Designer
Programmier-Tool
LASAL Safety Designer
Programming tool
Revision 13
vom / of: 16. 10.2020
Build Version I Sicherheitskennnummer
Build Version / Safety Number
1155 1.1.7
1156 1.1.7
1181 1.1.8
1187 1.1.9 (equal 1.1.8)
1239 01.01.013
1317 01.01.015
1353 01.01.030
1446 01.01.032
1496 01.01.034
1584 01.01.036
1616 01.01.038
1658 01.01.040
1709 01.01.044
1724 01.01.046
1748 01.01.048
1767 01.01.050
1808 01.01.052
1827 01.01.054
2060 01.01.056
2231 01.01.058
2320 01.01.060
Für Anwendungen bis PL e, Kategorie 4 gemäß EN ISO 13849-1 oder bis zu einem SIL 3 nach EN / IEC 62061.
For applications up to PL e,
EN / IEC 62061.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at
category 4 according to EN ISO 13849-1
Seite 12 von 13
Page 12 of13 13-06962A MFO SIGMATEK_SD/AS_int_Bus Z-Anhang_Rev13.doc
or until a SIL 3 according to
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]
eclitierung 4
Anhang 1 zu EG-Baumusterprüfbescheinigung Nr. TÜV-A-MHF/MG/13-06962A
Annex 1 to certificate of EG type examination No. TÜV-A-MHFIMG/13-06962A � V Revision 13
vom / of 16.10.2020
Dipl.-Ing. (FH) Matthias Forkl Notified Body 0408
TÜV AUSTRIA SERVICES GMBH
1so11Ec 1101°
Auszugsweise Vervielfältigung nur mit Genehmigung der TÜV AUSTRIA SERVICES GMBH gestattet. Duplication of this document in parts is subject to the approval by TÜV AUSTRIA SERVICES GMBH.
TÜV AUSTRIA SERVICES GMBH
Geschäftsfeld Industrie & Energie
A-1230 Wien, Deutschstraße 10
http://www.tuv.at 13-06962A MFO SIGMATEK_SDIAS_int_Bus Z-Anhang_Rev13.doc
Seite 13 von 13
Page 13 of 13
TÜV AUSTRIA Deutschland GmbH
Kurze Straße 40, D-70794 Filderstadt
Tel.: +49 (0)711 722 336 - 0
Fax: +49 (0)711 722 336 - 11
Email: [email protected]