Embed Size (px)
Citation preview
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
GILDEMEISTER CTX 400 Serie 2
LIST OF CONTENTS
Machine info …………………………………………………….……………………………..……………….......…………………………..…..……….
Equipment ………………………………………………………………………………………………….…………..………………………………….………
Technical data ………………………………………………………………………………………………..……………………………..….…………. Machine pictures …………………………………………………………………………………….……………………………………….……….
3 4 5 13
GILDEMEISTER CTX 400 Serie 2 | | 2
2
MACHINE INFO
| 3
Manufacturer
Type
Year of manufacture
Control
Machine number
GILDEMEISTER CTX 400 Serie 2 |
5 driven tools 30 VDI tool holders C-axis Partial hollow clamping device Chip conveyor Tailstock Three jaw power chucks with hole, NCD 210-66, Manufactured by SCHUNK, including attachments Work package, which includes:
- Hydraulic hollow clamping device Train raw channel Ø max. 66 mm (Tension 45 KN at 80 bar)
- Workpiece pick-up facility, hydraulic swiveling for parts Ø 65 mm x 120 mm long
- Connection for bar feeder or bar loading magazine Main spindle reducing tube, Ø 66 Differential pressure for main spindle Data transfer software „transfer-pilot“, complete and including connection cable, in german language User guide / Documentation Machine parameters on CD
| 4
EQUIPMENT
GILDEMEISTER CTX 400 Serie 2 |
| 5
TECHNICAL DATA
Work area Swing over bed rail cover
Swing over plan guide
Chuck diameter
Cross slide swing
Longitudinal swing Headstock Spindle head (flat flange)
Spindle diameter in front bearing
Spindle bore Main drive Performance of the three-phase main drive
Sped range Tool holder Number of tool stations
Tool holder according to DIN 69880
Shank diameter
Switching time 30° 180°
Number of driven tools
Power demand (40% DC)
Torque
Rotational speed, max. C-axis Speed range
Torque (holding torque)
Accuracy of the shutting down point
GILDEMEISTER CTX 400 Serie 2 |
| 6 GILDEMEISTER CTX 400 Serie 2 |
Tailstock Tailstock movement, automatic
Quill
Quill power, max. Hydraulic Content, complete
Pressure, max.
Pressure for clamping fixture, max. Coolant device Content
Pump capacity
Flow rate at 6 bar Fresh oil lubrication - Content Electrical connection AC power, total
Tension
Frequency
Safety according to VDE 0100
Permissible voltage fluctuation at 400 V Machine acceptance Ambient conditions Permissible ambient temperature
Max. relative humidity
Max. altitude Weight Net weight of the machine without chip conveyor
Gross weight of the machine in truck freight Dimensions
Machine without chip conveyor L x W x H (approx.)
| 7 GILDEMEISTER CTX 400 Serie 2 |
Machine description The 45 ° slant bed is a compact, torsionally rigid four rail bed of high-quality machine. All guideways are designed as linear rolling guides. The four-track bed allows free travel around the tailstock. The complete guideway covers increase the operational safety and durability. Headstock / spindle motor Three-phase motor runs as an integrated spindle motor, built as thermosymetrisch. The rotating spindle is in high-precision radial-angular contact ball bearings with maintenance-free lubrication. Cross slide
All guideways are designed as linear roller guides.
Feed drives Feed drive in longitudinal and plan with highly dynamic three-phase drives and preloaded ball screws Measuring systems The X axis is equipped with a direct / incremental measuring system with glass scale. All other axes have indirect / incremental measurement systems incl. zero position signal. Tool holder Dual turret with 12 tool stations, switchable with directional logic, tool holder DIN 69880 (VDI 3425), straight shank Ø 30, with auxiliary drive for max. 6 driven tools, incl. milling cycles. C-axis C-axis for the positioning and path control operation of the main spindle, incl. hydraulically operated continuously variable positioning. Tailstock In separate linear roller guide with rotating center MK 4 and forcing nut. The tailstock is automatically moved hydraulically. Belt-type chip conveyor Belt-type chip conveyor with coolant tank, 180 I, discharge height 1100 mm.
| 8 GILDEMEISTER CTX 400 Serie 2 |
Electrical data Working voltage
Control voltage
Machine light
Electrical equipment
Protection measure This lathe is designed for the safety measure for protection management system (protective earthing). You must not be used on systems with RCDs. Lubrication Automatic central lubrication, with electrical monitoring.
Coolant device High-pressure coolant system with internal coolant through the turret.
Hydraulic unit High pressure compact hydraulic system complete with pump and a fine filter in the pressure line. Clamping device Clamping device, diameter 66 mm, partially hollow 690 mm deep. Max. traction 45 kN at Pmax. 70 bar, complete mounted incl. electric and hydraulic control. Cover Closed machine cover with sliding chip protection hoods at the operating side with position monitoring and guard, according to accident prevention regulations. Window made of safety glass. Color Paint of machine cover
Chip protection hoods
Cabinet
| 9 GILDEMEISTER CTX 400 Serie 2 |
Control data SIEMENS SINUMERIK 810 D Control type Measuring system Input system Measure input Input resolution Interpolation type and range Feed input Feed rate override Feed range Servo handwheel Screw thread Rapids Rapid traverse Spindle speed Spindle speed override Spindle speed limitation Spindle stops at the main spindle
| 10 GILDEMEISTER CTX 400 Serie 2 |
Coordinate system Constant cutting speed Tool programming Tool data Cutter radius compensation Tool life monitoring Real time clock Machining time Limit switch Leadscrew compensation Backlash compensation Zero offset NC-memory User memory on hard disk Peripheral surface machining End face machining Helical-Interpolation Programm management Sub-programmes Sub programm repeat
| 11 GILDEMEISTER CTX 400 Serie 2 |
Programm format Programm input / output Reader Ethernet interface Programm duplicate Cycles Search set Parameter Reference point approch Variable programming Chamfers and radii Drawing size programm Jump function Real time clock Diagnosis (automatic)
| 12 GILDEMEISTER CTX 400 Serie 2 |
Diagnosis after selection Screen display Screen layout Plain text display Available languages
MACHINE PICTURES
| 13 GILDEMEISTER CTX 400 Serie 2 |
| 14 GILDEMEISTER CTX 400 Serie 2 |
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
