Upload
doanthu
View
227
Download
2
Embed Size (px)
Citation preview
BG 36GroßdrehbohrgerätRotary Drilling Rig
Geräteträger BS 80 BBase Carrier BS 80 B
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 1
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
Die BG 36, ein Gerät mit einemEinsatzgewicht von ca. 114 to und einemDrehmoment von 367 kNm dient zurHerstellung von
• verrohrten Bohrungen (Eindrehen desBohrrohres mit dem Drehgetriebe odermit angebauter Verrohrungsmaschine)
• unverrohrten, flüssigkeitsgestütztenBohrungen
• Bohrungen mit langer Hohlschnecke(SOB) - mit oder ohne Kellyverlängerung
• Sonderverfahren wie VdW-Bohren,Doppelkopfbohren (“verrohrtes SOB-Bohren”), Verdrängerbohrungen,Soil-Mixing Verfahren (CSM und SMW)
The BG 36 rotary drilling rig has anoperating weight of approx. 114 to and atorque of 367 kNm. It is ideally suited for:
• Drilling cased boreholes (installation ofcasing by rotary drive or optionally byhydraulic oscillator – both are poweredby the drilling rig)
• Drilling uncased deep boreholes that arestabilised by drilling fluid
• Drilling boreholes with long hollow stemaugers (CFA system), with or withoutkelly extensions
• Special drilling systems, such as FOW piles, double rotary head drilling(“cased CFA system”), displacementpiles, soil mixing system (CSM and SMW)
Bohrverfahren mitSerienausstattung:Kellybohren (ohne Verrohrungsmaschine)
SOB-Verfahren (hydraulisch undelektrisch vorgerüstet)
FDP Verdrängerbohren (hydraulischund elektrisch vorgerüstet)
Drilling processes withstandard equipment:Kelly drilling (without casing oscillator)
CFA drilling (pre-equipped withhydraulic and electric installations)
FDP Full-Displacement-Piling (pre-equipped with hydraulic andelectric installations)
8900
4300 - 4650
5675
4600
12
00
4500
1300
Hub / S
troke 9
250 m
m
9500
10000
2000
3840
9260
13090
1840
0
26200
24050
Kelly
BK
40/4
70/3
/30 (
A=
13,2
5 m
)
Abmessungen Dimensions
Windenvorschub Crowd winch type
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 2
Abmessungen Dimensions
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
570
4300 - 4650
5675
4600
12
00
4500
1300
Hub / S
troke 6
500 m
m
9500
10000
0
3430
4390
6800
7070
10890
21950
24200
Kelly
BK
40/4
70/3
/30 (
A=
13,2
5 m
)
Bohrverfahren mitSerienausstattung:Kellybohren (ohne Verrohrungsmaschine)
SOB-Verfahren (hydraulisch undelektrisch vorgerüstet)
FDP Verdrängerbohren (hydraulischund elektrisch vorgerüstet)
Drilling processes withstandard equipment:Kelly drilling (without casing oscillator)
CFA drilling (pre-equipped withhydraulic and electric installations)
FDP Full-Displacement-Piling (pre-equipped with hydraulic andelectric installations)
Zylindervorschub Crowd cylinder type
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 3
Technische Daten Technical specifications
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
Windenvorschub ZylindervorschubCrowd winch Crowd cylinder
Gesamthöhe Overall height 26.200 mm 24.200 mm
Einsatzgewicht ca. Operating weight (approx.)(mit BK40/470/3/30 ) (with kelly BK40/470/3/30) 114.000 kg 110.500 kg
Drehantrieb Rotary drive KDK 367 S KDK 367 S
Drehmoment bei 320 bar (nom.) Torque at 320 bar (nominal) 367 kNm 367 kNm
Drehzahl max Speed of rotation (max.) 48 U/min (RPM) 48 U/min (RPM)
Vorschubsystem Crowd system
Druckkraft / Zugkraft (effektiv) Crowd pressure / pull (effective) 400 / 400 kN 250 / 400 kN
Druckkraft / Zugkraft Crowd pressure / pull measured at thegemessen am Drehteller KDK casing drive adapter on the rotary drive 350 / 320 kN 350 / 320 kN
Hub (Kellysystem) Stroke (kelly system) 9.250 mm 6.500 mm
Hub (SOB-System) Stroke (CFA system) 18.700 mm 16.350 mm
Geschwindigkeit (ab/auf) Speed (down/up) 6,5 / 6,5 m/min 3,5 / 7,0 m/min
Schnellgang (ab/auf) Fast speed (down/up) 26 / 26 m/min 20 / 20 m/min
Hauptwinde Windenklasse Main winch winch classification M6 / L3 / T5 M6 / L3 / T5
Zugkraft (1. Lage) effektiv/nominal Line pull ( 1st layer) effective/nominal 250 kN / 317 kN 250 kN / 317 kN
Seildurchmesser / Länge Rope diameter / Length 32 mm / 90 m 32 mm / 90 m
Windengeschwindigkeit Line speed max. 71 m/min 71 m/min
Hilfswinde Windenklasse Auxiliary winch winch classification M6 / L3 / T5 M6 / L3 / T5
Zugkraft (1. Lage) effektiv/nominal Line pull ( 1st layer) effective/nominal 100 kN / 125 kN 100 kN / 125 kN
Seildurchmesser / Länge Rope diameter / Length 20 mm / 67 m 20 mm / 67 m
Windengeschwindigkeit Line speed (max.) 72 m/min 72 m/min
Mastneigung nach hinten / vorne Mast inclination backward / forward 15° / 5° 15° / 5°
quer Lateral Bohrbetrieb 3° Drilling mode 3°Hilfswindenbetrieb 5° Aux. winch mode 5°
Serienausstattung Standard equipment
• Drehgetriebe KDK 367 S (Schaltgetriebe)
• Hauptwinde mit hydraulischer Freilaufsteuerung
• Haupt- und Hilfswinde mit Spezialrillung
• Hubendschalter für Haupt- und Hilfswinde
• Wirbel für Hauptseil
• Seilvorschub: Mastverlängerung 2 m
• Schwenkbarer Anschlagpunkt für Haupt- und Hilfsseil
• Transportstützen für Mastoberteil und Mastunterteil
Mess- und Steuerungstechnik• SPS Rechner für alle elektrisch angesteuerten Funktionen
• Bauer Standardbildschirmeinheit inkl. Diagnosefunktion
• Bauer Komfortbildschirm inkl. Diagnosefunktion und digitaleAnzeige der Pumpendrücke
• Anzeige von Fehlermeldungen in Klartext
• Notsteuerung Bohrgerät (Kernfunktionen)
• Mastneigungsmessung in x/y Richtung (Anzeige digital/ analog)
• Mastautomatik (automatische Vertikalstellung)
• Hauptwinde mit elektronischer Seilkraftmessung
• Hilfswinde mit hydraulischer Seilkraftmessung
• Tiefenmessung Hauptwinde
• Tiefenmessung Vorschub (bei Windenvorschub)
• Funktion "Wirbel aufstellen" Hauptwinde
• Drehzahlmessung KDK
• Schlappseilabschaltung Hauptwinde
• Anpresskraft-Einstellung
• Abbohrassistent Kelly
• Ziehsteuerung
• Rotary drive KDK 367 S (multi gear drive)
• Main winch with hydraulically operated freewheeling
• Main and auxiliary winch with special grooving
• Hoist limit switch on main and auxiliary winches
• Swivel for main rope
• Crowd winch system: mast extension 2 m
• Pivoted anchor points for main and auxiliary ropes
• Transport supports for upper and lower mast sections
Measuring and control equipment• PLC processor for all electrically actuated functions
• Standard monitor unit with integrated diagnostic capability
• Bauer extended monitor incl. diagnostic functionsand digital display of pump pressures
• Display of fault messages as plain text
• Emergency mode of operation for drilling rig (core functions)
• Mast inclination measurement on x/y axes (digital/analog display)
• Automatic vertical alignment of mast
• Electronic load sensing on main rope
• Hydraulic load sensing on auxiliary rope
• Depth measuring device on main winch
• Depth measuring device (on crowd winch system)
• Swivel alignment function on main winch
• Speed measuring device on KDK
• Rope slack prevention on main winch
• Crowd pressure setting
• Crowd control system Kelly
• Tool extraction control system
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 4
Serienausstattung:• integriertes Kellydämpfungssystem• Gleitleisten sind ohne Demontage
des Drehgetriebes auswechselbar• auswechselbarer Kellymitnehmer• auswechselbare Mitnehmerleisten• Kardangelenk• Hydraulische Verbindungen mit
Schnellkupplungen• 4 einstellbare Betriebsmodi (siehe
Diagramme)• Transportstützen• Hebegeschirr
Standard equipment:• Integrated kelly damping system• Wear pads exchangeable without
removal of rotary drive• Exchangeable kelly drive adapter• Exchangeable kelly drive keys• Cardanic joint• Quick-release couplers on hydraulic
hoses• 4 selectable modes of operation
(refer to diagramms)• Transport supports• Slings gear for rotary drive
750
14
55
23
0
24
00
27
00
16
25
90
0
1300
2250
800
29
00
1900
Gewicht ohne Schlitten 7,8 toWeight without sledge
Drehgetriebe Rotary drive
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
SchaltgetriebeMulti gear rotary drive
KDK 367 S
367
M [kN
m]
n [1/min]
176
530
0 16 48
367
M [kN
m] 254
00 11 23
367
M [kN
m]
00 8 23
367
M [kN
m]
n [1/min]
n [1/min]
n [1/min]
110
110
00 8 23
1. Gang Standardbetrieb1st gear standard mode
1. Gang Einrichten und Felsbohren1st gear Set up and rock drilling
1. Gang MD reduziert1st gear MD reduced
2. Gang Standardbetrieb2nd gear standard mode
Darstellung nicht maßstäblichnot to scale
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 5
Geräteträger BS 80B Base carrier BS 80B
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
Motor Engine CAT C15
Nennleistung ISO 3046-1 Rated output ISO 3046-1 354 kW @ 1800 U/min (rpm)
Motor spezifiziert nach Abgasnorm Engine conforms to Exhaust Emission Standard EEC 97/68EC Stage 3 und EPA/CARB TIER III
Dieseltank Diesel tank capacity 800 l
Umgebungstemperatur unter Vollast Ambient air temperature (at full power) bis (up to) 45° C
Schalldruckpegel in Kabine Sound pressure level in cabin(EN 791, Anh. A) (EN 791, Annex A) LPA 78 dB(A)
Schalleistungspegel Sound power level (2000/14/EG u. EN 791, Anh.A) (2000/14/EG u. EN 791, Annex A) LWA 114 dB(A)
Hydrauliksystem Hydraulic system Zweikreisbohrhydraulik2-hydraulic circuit system for drilling
Hydraulische Leistung Hydraulic power output(gemessen am Verteilerblock KDK) (measured at inlet to rotary drive) 277 kW
Hydraulikdruck Hydraulic pressure 320 bar
Fördermengen (Hauptkreise + Hilfskreis) Flow rates (main circuits + auxiliary circuit) 2 x 320 l/min + 1 x 130 l/min
Tankvolumen Hydraulic oil tank capacity 900 l
Unterwagen (Teleskopfahrwerk) Undercarriage (Retractable crawler frames) UW 110
Laufwerksklasse Crawler type B 7
Spurweite (eingefahren/ausgefahren) Track width (retracted/extended) 2.600 / 3.800 mm
Fahrwerksbreite (eingefahren/ausgefahren) Overall width of crawlers (retracted/extended) 3.400 / 4.600 mm
3-Steg Bodenplatten Width of triple grouser track shoes 800 mm
Fahrwerkslänge Overall length of crawlers 5.675 mm
Zugkraft effektiv/nominal Traction force effective/nominal 750 kN / 885 kN
Fahrgeschwindigkeit Travel speed 1,3 km/h
Serienausstattung Standard equipment
• Motornotsteuerung
• Leerlaufautomatik (zur Verbrauchsoptimierung)
• Motordiagnostiksystem
• Diagnoseleiste für hydraulische Funktionen
• abnehmbarer Ballast (5,3 + 5,3 + 10,5 t)
• abnehmbare Raupenträger
• Verzurraugen an Raupenträgern
• Aufstiegsleiter zum Oberwagen und Begehung am Oberwagen
• Bordbeleuchtungssatz ( 6 Scheinwerfer)
• Bordwerkzeugsatz
• Elektrische Betankungspumpe
• Komfortfahrerkabine (Breite 950 mm)
• Kabine mit FOPS Standard
• Klimaanlage
• Vorbereitung für Radio und CD
• Trittroste (neben und vor der Kabine)
• Emergency mode of operation for engine
• Automatic idling mode (to optimise fuel consumption)
• Engine diagnostic system
• Diagnostic panel for hydraulic functions
• Removable counterweight (5,3 + 5,3 + 10,5 tons)
• Removable crawler side frames
• Transport securing lugs on crawler units
• Access ladder and catwalk on uppercarriage
• On-board lighting set ( 6 spotlights)
• On-board tool set
• Electric refuelling pump
• High-comfort operator's cab (width 950 mm)
• Protective roof grate (FOPS compliant)
• Air conditioning system
• Pre-equipped for radio and CD player
• Catwalk (on side and in front of operator's cab)
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 6
Ausstattungserweiterung Additional equipment options
Zusatzausstattung Optional equipment
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
GrundgerätKompressor (1000 l/min Saugleistung)
Generator (13 kVA)
Bioölbefüllung
Schraubstockanbau
Panzerverglasung
Standheizung
Komfortfahrersitz
Schutzbelüftung
Radio und CD Player
Base carrierCompressor (1000 l/min capacity)
Generator (13 kVA)
Bio-degradable oil
Vise attachment
Tempered safety glass panels
Independent cab heater
High-comfort operator seat
Pressurized air conditioning system
Radio and CD player
Drehgetriebe KDK 367 S (mit Spin-off möglichkeit)
Vorschubzylinder 7,65 m
Hauptwinde 300 kN (Huckepack)
B-TRONIC 2.1 elektronisches Steuerungs- und Kontrollsystem zum– Überwachen und Steuern der Bohrfunktionen– Erfassen der Betriebsdaten– Visualisierung der Kellyposition
Unterwagen UW 110Z
Bodenplatten 900 mm
Bohrachserweiterung auf 1550 mm
Rotary drive KDK 367 S (c/w spin-off mode)
Crowd cylinder 7,65 m
Main winch 300 kN (mounted on top of uppercarriage)
"B-TRONIC 2.1Electronic monitoring and control system for– Monitoring and controlling drilling operations– Acquisition of operating data– Visualisation of kelly position"
Undercarriage UW 110Z
Width of triple grouser track shoes 900 mm
Drill axis extension to 1550 mm
BohrgerätFreifall Hauptwinde
Freifall Hilfswinde
Wirbel für Hilfsseil
Aufstiegsleiter am Mast
Mastabstützung
obere Kellyführung
Schneckenputzer (Kellysystem)
Zentralschmierung
Zusatzscheinwerfer
Kameraanbau
Automatikdrehteller
Drehmomentwandler
Vorrüstung Automatikdrehteller
Vorrüstung Sonderbohrverfahren
Traverse für Single Pass Verfahren
Verrohrungsmaschinenanbau (max. BV 1500 HD-07)
Drilling equipmentFreefall main winch
Freefall auxiliary winch
Swivel for auxiliary rope
Mast access ladder
Mast support unit
Upper kelly guide
Auger cleaner (for kelly system)
Central lubrication system
Additional spotlight set
Video camera attachment
Automatic casing drive adapter
Torque multiplier
Pre-equipped for automatic casing drive adapter
Pre-equipped for special drilling systems
Spreader beam for single pass process
Oscillator attachment (max. BV 1500 HD-07)
Mess- und SteuerungstechnikAufzeichnung der Betriebsdaten
Fernübertragung der Betriebsdaten
Schockiereinrichtung für KDK
Überlastschutz für Hauptseil
Hilfswinde mit elektronischer Seilkraftmessung
Abbohrassistent FDP
Abbohrassistent SOB
Ziehassistent
Measuring and control equipmentRecording of operating data
Remote transmission of process and operating data
Uni-directional impact function on KDK (for auger discharge)
Overload protection device on main rope
Electronic load sensing on auxiliary rope
Crowd control for special drilling FDP
Crowd control special drilling CFA
Tool extraction assistance
Ausstattungsvarianten Alternative equipment options
Seilvorschub: Mastverlängerung 3 m (anstatt 2 m) Crowd winch system: mast extension 3 m (replacing 2 m)
Zylindervorschub: Mastverlängerung 2 m
Zylindervorschub: Verlängerung Mastunterteil 0,8 m
Crowd cylinder system: mast extension 2 m
Crowd cylinder system: extension lower mast 0,8 m
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 7
Transportdaten Transport data
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
G =
10,5 to
G =
5,3 to
200 575
15
00
15
00
10000
32
50
80
0
12300
6030
2240
2000
34
20
34
50
1200
4150
5675
200
12300
34
20
14
00
14
00
34
50
1200
4500
5675
200
Ø 3
50
12300
31
00
71
5
30
010500
G =
5,3 to
G = 2 x 1,75 to
G = 18,6 to
Breite = 2450 mm
G =
9,7 to
G =
9,7 toG = 30 to
G = 92,6 to
G = 71,5 to
200
15
00
10000
32
50
12500
7500
1950
4150 5675
4600
11
30
11
30
2370 23703400
8003
06
0
39
8
(Width)
G = 9 to
Breite = 1960 mm(Width)
G = 7 to
Breite = 1960 mm(Width)
G = 1,3 to
Breite = 900 mm(Width)
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 8
Anwendungen Applications
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
Kellybohrverfahren Kelly drilling system
1700
A
B
T
Hw
24050
3840
Bemerkungen zur Bohrdatenermittlungsiehe „Kellystangen 905.518.1“
For further details on the acquisition ofdrilling data please refer to “Kelly Bars 905.518.1”
Unverrohrt Uncased 2.300 mm 2.500 mm
Verrohrt Cased 2.000 mm 2.200 mm
Ohne BV Without casing oscillator Hw – 0,5 m Hw – 0,5 m
Mit BV With casing oscillator Hw – 1,5 m Hw – 1,5 m
Zusatzausstattung / optional equipment:
Anbau VerrohrungsmaschineAttachment of hydraulic oscillator
BV 1500 HD-07
Standardverfahren: unverrohrt, oder Einbau der Bohrrohre mit Drehgetriebe
Option: Einbau der Bohrrohre mit angebauter hydraulischerVerrohrungsmaschine
Standard system: Uncased drilling or installation of casing with rotary drive
Optional: Installation of casing with hydraulic oscillator attached to the drilling rig
Windenvorschub ZylindervorschubCrowd winch Crowd cylinder
Kellytyp A (m) B (m) Gewicht Hw (m) T (m) Hw (m) T (m)Type of kelly bar Weight (kg)
BK 40/470/3/27 12,25 30,16 7.100 8,90 28,00 6,80 27,40
BK 40/470/3/30 13,25 33,16 7.650 8,90 31,00 6,80 30,40
BK 40/470/3/36 15,25 39,16 8.750 6,90 37,00 4,80 36,40
BK 40/470/3/42 17,25 46,16 9.850 4,90 43,00 2,80 43,40
BK 40/470/4/40 13,25 42,79 10.500 8,90 40,60 6,80 40,00
BK 40/470/4/48 15,25 50,79 12.000 6,90 48,60 4,80 48,00
BK 40/470/4/52 16,25 54,79 12.750 5,90 52,00 3,80 52,00
BK 40/470/4/60* 18,25 62,79 14.250 3,90 60,60 1,80 60,00
BK 40/470/4/68* 20,25 70,79 15.000 1,90 68,60 – –
* 3. Gegengewicht 5,3 to erforderlich (ab Kelly 4/60)* allowed with 3 rd counterweight 5,3 to only (from kelly 4/60 and more)
Bohrtiefen Drilling depths
Bohrdurchmesser Drilling diameter
Bohrrohrlängen Length of casing sections
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 9
Anwendungen Applications
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
SOB – Bohrverfahren CFA – Drilling system
300
80
00
12
00
4300 4500
1300
0
32490
22600
19800
300
12
00
4300 4500
1300
22600
25680
19800
Schneckenlä
nge /
Auger
length
19.4
00 m
m
Schneckenlä
nge /
Auger
len
gth
19.4
00 m
m
0
Sch
litte
nh
ub
/ S
tro
ke
of
sle
dg
e 1
8.7
00
mm
Sch
litte
nh
ub
/ S
tro
ke
of
sle
dg
e 1
8.7
00
mm
Vorschubsystem Windenvorschub ZylindervorschubCrowd system Crowd winch Crowd cylinder
Kellyverlängerung -- 8,0 m -- 8,0 mKelly extension
Bohrtiefe mit Schneckenputzer 17,00 m 25,00 m 14,70 m 22,70 mDrilling depth with auger cleaner
Bohrtiefe ohne Schneckenputzer 18,10 m 26,10 m 15,80 m 23,80 mDrilling depth without auger cleaner
Max. Bohrdurchmesser 1.200 mm 1.200 mm 1.200 mm 1.200 mmMax. drilling diameter
Max. Zugkraft 400 kN 400 kN 500 kN 500 kNMax. extraction force
Max. Zugkraft mit Haupt- und Vorschubwinde (effektiv) 900 kN 900 kNMax. extraction force with main- and crowd winch (effective) (500 +400 kN) (500 +400 kN)
Max. Anpresskraft 350 kN + Schneckengewicht Gewicht KDK + SchneckeMax. crowd force 350 kN + auger-weight Weight of rotary drive + auger
Schneckenlänge L (inkl. Anfänger) 19,40 m 17,40 mContinuous flight auger length L (incl. starter auger)
hydraulische Mastabstützung erforderlichhydraulic mast support required
Zeichnung mit WindenvorschubIllustration showing crowd winch module
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 10
Anwendungen Applications
BG 36 – Großdrehbohrgerät BG 36 – Rotary Drilling Rig
DKS – Doppelkopfverfahren DKS – Double rotary drive system
DKS mit Drehantrieb (Schnecke) und Drehmomentwandler (Bohrrohr)
DKS with rotary drive for auger and torque multiplier BTM for casing
4300
12
00
4700
1300
Schlit
tenhub /
Str
oke o
f sle
dge 1
7500 m
m
17675
4800
26790
Systemvoraussetzungen:3. Gegengewicht 5,3 toSeilvorschubHydraulische Mastabstützung
System requirements:3 rd counterweight 5,3 toCrowd winch typeHydraulic mast support
Drehantrieb für Bohrrohr BTM 400Rotary drive for casing (max. 360 kNm)
Durchmesser (max.) 880 mmDiameter (max.)
Bohrtiefe 17,00 mDrilling depth
Zugkraft (max.) 900 kNExtraction force (max.) (500 + 400 kN)
Vertikale Relativverschiebung der Drehantriebe 550 mmRelative vertical movement between rotary drives
Einsatzgewicht (ca.) 138.000 kgOperating weight (approx.)
KDK 367 S + BTM 400
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 11
Weitere Verfahren Additional systems
Anbauten Fräsverfahren Cutter system attachments
CSM BC / BGCutter Soil Mixing Anbau Schlitzwandfräse BC
BC Diaphragm wall cutter on BG
VdW SMW FDPVor-der-Wand Bohren Soil Mixing Wand Verfahren VerdrängerbohrenFront-Of-Wall drilling (FOW) Soil Mixing Wall system Full Displacement Piling
Technische Änderungen ohne Vorankündigung undVerpflichtung gegenüber früher gelieferten Geräten. Die abgebildeten Geräte können Sonderausstattungenhaben. Technische Daten ohne Berücksichtigung desWirkungsgrades.Irrtum und Druckfehler vorbehalten.
Technical Specifications are subject to change withoutprior notice and incurring responsibility for machinespreviously sold. The shown machines may have specialequipment. Technical data do not consider power losses.Error and misprints reserved.
905.612.1 2/07
BAUER Maschinen GmbHWittelsbacherstraße 5D-86529 SchrobenhausenTel. +49 (0)82 52/97-0Fax +49 (0)82 52/97-1135e-mail: [email protected]
905-612-1_02-07_BG36.qxd 06.03.2007 11:31 Uhr Seite 12