Embed Size (px)
Citation preview
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
HAAS DT1
LIST OF CONTENTS
Machine info …………………………………………………….…………..………………………..………………………………………..…..……….
Equipment …………………………………………………………………….……………………………………..………………………………….………
Technical data ……………………………………………………………………………………………..……………………………..….…………. Machine pictures …………………………………………….…………………………………………………………………………….……….
Machine layout …………………………………………………….…………………………………………………………………..….…………...
Space requirement and transport …………………………………………………….……………………………
Brochure …………………………………………………………………………………………….………………………………………………………………
3 4 5 7 9 11 13
HAAS DT1 | | 2
2
MASCHINENINFO
| 3
Manufacturer
Type
Year of manufacture
Control
Machine number
Travels
HAAS DT1 |
3 Machine vices approx. 20 Tool holders SK30
20 Pull studs without bore for spindle taper BT30 Programmable coolant nozzle 3D probe
2 Spiral chip conveyor - eject backwards Rotation and scaling of the coordinate system High-Speed machining with „look ahead“ function Extension to 8-M functions Renishaw tool and workpiece touch probe User guide / Documentation Machine parameters on CD
| 4
EQUIPMENT
HAAS DT1 |
| 5
TECHNICAL DATA
Travels
X axis
Y axis
Z axis Table Lenght
Width
T-slot width
T-slot center distance
Number of T-slots
Max. weight on table (evenly distributed) Spindle Max. rating
Max. speed
Max. torque
Drive system
Taper
Bearing lubrication
Cooling Tapping Max. tapping speed
Max. tap size (aluminium) Feedrates Rapids on X
Rapids on Y
Rapids on Z
Max. cutting
HAAS DT1 |
| 6 HAAS DT1 |
Axis motors
Max. thrust X
Max. thrust Y
Max. thrust Z Tool changer Type
Capacity
Max. tool diameter
Max. tool diameter (adjacent empty)
Max. tool lenght
Chip-to-chip (avg) General Air required
Coolant capacity
Table
MACHINE PICTURES
| 7 HAAS DT1 |
| 8 HAAS DT1 |
| 9 HAAS DT1 |
MACHINE LAYOUT
| 10 HAAS DT1 |
Source: http://int.haascnc.com/mt_spec1.asp?intLanguageCode=1031&id=DT-1&webID=DRILL_TAP_VMC
| 11 HAAS DT1 |
SPACE REQUIREMENT AND TRANSPORT
| 12 HAAS DT1 |
Source: http://int.haascnc.com/mt_spec1.asp?intLanguageCode=1031&id=DT-1&webID=DRILL_TAP_VMC
Haas Automation Europe | www.HaasCNC.com | +32 2 522 99 05 | Made in U.S.A.
1
2
3
4
5
6
Haas DT-1The Drill/Tap Center
4. 61,0 m/min rapids and high accelerations combine to reduce cycle times
1. Inline direct-drive spindle provides 15 000 rpm, and will rigid tap to 5 000 rpm
2. High-speed Side-mount toolchanger (20+1 tools)
3. ISO standard G-code programming through the easy-to-use Haas control, or use the optional Intuitive Programming System
5. A high-volume coolant system and optional dual augers clear chips from the enclosure quickly
6. Heavy cast-iron base FEA optimized for rigidity
[ S p e c i a l S e r i e s ]
Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment. Actual product appearance may differ.
Warranty: 1 Year Parts and Labor
[ Options ] partial list
•20000-rpmBT30TaperSpindle •Through-SpindleCoolantSystem •Through-ToolAirBlast •MinimumQuantityLubricationSystem •DualChipAugers •RearChip-LiftsAugers •High-SpeedMachiningw/Look-Ahead •HaasIntuitiveVisualSystem •WirelessIntuitiveProbingSystem •4th-and5th-AxisDrives •WiFiConnectionfortheHaasControl
[ Standard Features ]
•11,2kWVectorDrive •15000-rpmBT30TaperSpindle •InlineDirectDrive •20+1Side-MountToolChanger •38cmColorLCDMonitorw/USBPort •High-SpeedRigidTapping •High-ImpactSafetyGlass •Power-failuredetectionmodule •1GBProgramMemory •MadeintheUSA
C E R T I F I E D
C E R T I F I E D
C E R T I F I E D
A
B
Front Top
CD
[ Specifications ]
Travels DT-1
X 508 mm
Y 406 mm
Z 394 mm
Table
Length 660 mm
Width 381 mm
Max Weight on Table1 113 kg
Spindle
Speed 15 000 rpm
Drive System Inline Direct Drive
Max Torque 62 Nm @ 1 700 rpm
Max Rating 11,2 kW
Optional Spindle
Speed 20 000 rpm
Drive System Inline Direct Drive
Max Torque 21.7 Nm @ 2 800 rpm
Max Rating 11,2 kW
Tapping
Max Tapping Speed 5 000 rpm
Max Tap Size (aluminum) M12–1,75
Feedrates
Max Rapids 61,0 m/min
Max Cutting 30,5 m/min
Tool Changer
Capacity 20+1
Tool Type/Taper BT 30
Max Tool Diameter 51 mm
Chip to Chip 1,8 sec
General
Power Required (min) 354 - 488 VAC 3-Phase
Coolant Capacity 170 L
Machining anchoring highly recommended.Contact your HFO for additional information.
Haas DT-1The Drill/Tap Center
[ T e c h n i c a l S p e c i f i c a t i o n s ]
EN.06/2016
The DT-1 features a high-speed side-mount tool changer that swaps tools quickly to keep non-cutting time to a minimum.
The Haas-built BT30 taper inline direct-drive spindle provides 15 000 rpm for high-speed milling, and allows rigid tapping at speeds up to 5 000 rpm.
The DT-1 is a compact, high-speed drill and tap machine with full milling capabilities. The machine has a 508 x 406 x 394 mm (xyz) work cube and a 660 x 381 mm T-slot table. A powerful BT30 taper inline direct-drive spindle provides 15 000 rpm, and allows rigid tapping at speeds to 5 000 rpm. A high-speed, 20-pocket tool changer swaps tools quickly, while 61,0 m/min rapids and high accelerations combine to shorten cycle times and reduce non-cutting time.
* With control swung forward. Additional 914 mm required to open rear service panel.
Operating Dimensions DT-1
A. Max Operating Height 2 489 mm
B. Max Operating Width 1 727 mm
C. Max Operating Depth* 2 642 mm
D. Max Operating Depth w/coolant tank 3 175 mm
Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment. Actual product appearance may differ.
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
