Upload
others
View
22
Download
0
Embed Size (px)
Citation preview
Hydraulische CNC Abkantpressen HESSE CNC eco
hydraulic CNC press brakes HESSE CNC eco
Flexibilität, Qualität, Produktivität und Sicherheit….vereint in den HESSE CNC Abkantpressen.Flexibility, quality, productivity and safety…united in the HESSE CNC press brakes.
Mod. CNC eco 30175
Wir haben mehr als 480 Referenzen!We have more than 480 references!
Eigene Servicetechniker für Inbetriebnahmen, Wartungen und Sicherheitsüberprüfungen!Own service engineers for machine start-ups, services and safety inspections!
V221211
2 Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
Standardausrüstung
Optionale Ausrüstung
• CNC Grafik-Steuerung CYBELEC DNC 880 S Windowsinklusive PC-Software
• 4 CNC gesteuerte Achsen (Y1, Y2, X, R)• Bombiervorrichtung motorisch über CNC verstellbar• Werkzeugsystem Promecam-Amada• Oberwerkzeug 75°, leicht gekröpft, Radius gehärtet,
geschliffen und geteilt• 4-V Matrize 16/ 22/ 35/ 50 mm, Radien gehärtet,
geschliffen und geteilt (bis 320 to)• HESSE Multi-V Matrizenblock (ab 400 to)• motorischer Hinteranschlag auf Linearführungen
und Kugelgewindespindeln• Blechauflagearme auf leichtgängigen Linearführungen
mit T-Nuten und Kippanschlägen• Laserschutzvorrichtung• Maschine und Ausrüstung entsprechend den CE-Vorschriften
• CNC Steuerung Cybelec DU 6000 (Minderpreis)• CNC Steuerung HESSE CNC Easy Bend (Minderpreis)• Entfall R-Achse (Minderpreis)
• Ausführungspaket plus+ 3D
• 3D-CNC Steuerung ModEva 10S • schnellerer Hinteranschlag• zusätzlich gesteuerte Achsen des Hinteranschlages
X1/X2, R1/R2, Z1/Z2• AP3-AP4 Biegehilfen mit Gleitführung• Parkposition für Blechauflagearme (1 Meter)• hydr. Ober- und Unterwerkzeugklemmung für WILA Werkzeuge• hydr. Oberwerkzeugklemmung System Promecam-Amada• Matrizenverschiebeeinrichtung• Sonderausladungen• mot. höhenverstellbare Laserschutzvorrichtung• zusätzliche Fingerblöcke• zusätzliche Blechauflagearme• Werkzeug-Schnellklemmung• lasergehärtete HESSE Werkzeuge• Lasermesssystem für den Biegewinkel• Klimaanlage für den Schaltschrank• T-Nuten im Tisch• Ölkühler• Blechzuführeinrrichtung• Tandem Vorbereitung• Zentralschmierung
• CNC graphic control CYBELEC DNC 880 S Windowswith PC-Software
• 4 CNC controlled axes (Y1, Y2, X, R)• motorized anti deflection system controlled by CNC• tool system Promecam-Amada• upper tool 75°, light cranked, radius hardened,
ground and sectioned• 4-V die 16/ 22/ 35/ 50 mm, radius hardened,
ground and sectioned (up to 320 to)• HESSE multi-V die block (starting from 400 to)• motorized back gauge on linear guides and driven
by ball screws• linear guided sheet support arms with T-slots
and tilt stops• laser safety device• in conformity with CE-regulations
• CNC control Cybelec DU 6000 (price reduction)• CNC control HESSE CNC Easy Bend (price reduction)• none R-axis (price reduction)
• option model package plus+ 3D
• 3D-CNC control ModEva 10S • faster back gauge• additional controlled axes of back gauge
X1/X2, R1/R2, Z1/Z2• AP3-AP4 sheet follower with sliding guide• parking area for support arms (1 meter)• hydr. upper and lower tool clamping for WILA tools• hydr. upper tool clamping system Promecam-Amada• die moving attachment• special throat depth• mot. hight adjustable safety device• additional finger blocks• additional support arms• quick tool clamping• laser hardened HESSE tools• laser based measuring device for bending angle• air conditioned electrical box• T-slots in table• oil cooler• sheet feeding unit• tandem preperation• central lubrication
standard equipment
optional equipment
Mod. CNC eco 30175
Die Einzigartige Kombination aus Leistung und Bedienfreundlichkeit macht die CNC eco zu einer extrem wirtschaftlichen Abkantpresse und unterstützt Sie bei der Reduktion der Herstellungskosten Ihrer Produk-te - Vom einfachen Einzelbug bis hin zum komplexen, großformatigen Biegeteil. Der spannungsfrei konstruierte Maschinenrahmen, die große Einbauhöhe sowie die große Ausladung sind nur einige der Highlights die diese Maschine bietet. Das modulare Baukastenkonzept ermöglicht Konfigurationen von bis zu 13 Achsen und darüber hinaus. Es werden ausschließlich Elektro- und Hydraulikbauteile international renommierter Hersteller wie z.B. Bosch, Rexroth, Siemens und Telemecanique ver-baut. Der Gleichlauf der beiden Hauptzylinder Y1 und Y2 wird elektrohy-draulisch mittels Proportionalventiltechnik geregelt.
The unique combination of performance and ease of use makes the CNC eco to an extremely economic press brake which helps to reduce the costs of your products - from simple single bend to complex, large-scale bending parts. Tension-free manufactured machine frame, huge daylight and large throat depth are just some of the highlights this ma-chine offers. The modular design allows configurations of up to 13 axes and beyond. Electrical and hydraulic components only of internationally well known manufacturers such as Bosch Rexroth, Siemens and Tele-mecanique are installed. The synchronisation of the two main cylinders Y1 and Y2 is electro-hydraulic controlled by proportional valves.
Cybelec DNC 880 S (Standard)• 2D Grafik• 10“ Farbdisplay• interner Datenspeicher• USB Anschluss• PC-Software für Programmierplatz• Multisimulation (Vorschlag unterschiedlicher
Biegefolgen vom System zur Auswahl)• direkte Programmierung des Biegewinkels• bedienerfreundliche Programmierung
in Dialogform• grafische Simulation des Biegeablaufes• automatische Berechnung der gestreckten Länge für den Blechzuschnitt
• Programmierung der Schrägstellungdes Oberbalkens
• Werkzeugabmessungen programmierbar,dadurch einfacher Aufruf bei Programmierung eines Produktes
• Korrekturfaktor für Rückfederung undgestreckte Länge
• Winkelkorrektur• Programmierung der Biege- und
Rückzugsgeschwindigkeit• manueller, halb- und vollautomatischer
Arbeitsmodus• Tonnage Berechnung/Programmierung
durch die CNC• laufende Programme können jederzeit für
Einzelbiegungen unterbrochen werden undanschließend zu Ende geführt werden
Cybelec DNC 880 S (standard)• 2D graphic• 10” color display• internal data memory• USB connection • PC software for work station• multi simulation (suggestion of various
bending sequences to choose from) • direct bending angle input • user-friendly programming in
dialogue form • graphic simulation of the bending
process on screen• automatic calculation of the
blank sheet size • programming of upper beam at
an angle • programmable tool dimensions for easy
recall when programming a product• correction factor for spring-back and
straight length • bending angle correction• programming of bending and retraction
speed • manual, semi automatic and full
automatic working mode • tonnage calculation/programming
by CNC • current programs can be interrupted
easily for single bendings and can besubsequently continued and finished
CNC Steuerung / Computer Numerical Control
Cybelec ModEva 10 S (Option)wie Modell DNC 880 S jedoch mit:• 3D Grafik• Quick-Cursor (zu schnelleren Auswahl)• Rechnereinheit geschützt im Schaltschrank
nur Bedienterminal außen• Netzwerkanbindung möglich
Cybelec ModEva 10 S (optional)like model DNC 880 S but additional:• 3D graphic• quick-cursor (for faster selection)• CPU unit protected in electric carbinet
only user terminal outside the machine• network connection possible
Cybelec DNC 880 S
HESSE CNC Easy Bend (Minderpreis)
• einfache Bedienung• kein Programm erforderlich• Werkzeugabmessungen programmierbar• Korrekturmöglichkeit• USB Anschluß
HESSE CNC Easy Bend (price reduction)
• easy to operate• no programm required• programmable tool dimensions• correction possibility• USB interface HESSE CNC Easy Bend
Cybelec DU 6000
mit numerischer Anzeige / with numerical displayCybelec DU 6000 (Minderpreis)
• numerische Anzeige (keine Grafik)• interner Datenspeicher• direkte Programmierung des Biegewinkels• automatische Berechnung der gestreckten
Länge für den Blechzuschnitt• Programmierung der Schrägstellung des
Oberbalkens• Werkzeugabmessungen programmierbar,
dadurch einfacher Aufruf bei Programmierung eines Produktes
• Winkelkorrektur• Programmierung der Biege-
und Rückzugsgeschwindigkeit• manueller, halb- und vollautomatischer
Arbeitsmodus• Tonnage Berechnung/Programmierung
durch die CNC
Cybelec DU 6000 (price reduction)
• numerical display (no graphic)• internal data memory• direct bending angle input• automatic calculation of the
blank sheet size• programming of upper beam
at an angle• programmable tool dimensions
for easy recall when programminga product
• bending angle correction• programming of bending
and retraction speed• manual, semi automatic and
full automatic working mode• tonnage calculation/programming
by CNC
mit grafischer Anzeige / with graphical display
3Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
4 Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
Hinteranschlag / back gauge
Die Fingertiefen- (X) und Fingerhöhenpositi-onen (R) werden automatisch berechnet und durch die Steuerung auf Kugelgewindespindeln und Linearführungen positioniert. Der An-schlag-Finger Rückzug wird ebenfalls automa-tisch durchgeführt sollte es der zu kantende Teil benötigen. Der Fingerabstand ist entlang der Linearführungen leicht manuell verstellbar.
The finger block depth (X) and height (R) posi-tions are automatically calculated and positi-oned with the control on ball screws and linear guides. If it is necessary for the work piece the back gauge retraction is also done automati-cally. The finger block distance is easy manual adjustable along the linear guide.
2-Achsen Hinteranschlag X und R (Standard)2-axes back gauge X and R (standard)
Der Hinteranschlag kann mit bis zu 6-Achsen ausgestattet werden: X1/X2, R1/R2 und Z1/Z2
The back gauge can be equipped with up to 6 axis: X1/X2, R1/R2 and Z1/Z2
zusätzliche Hinteranschlagachsen (Option) / additional back gauge axis (optional)
6-Achsen Hinteranschlag X1, X2, R1, R2, Z1, Z26-axes back gauge X1, X2, R1, R2, Z1, Z2
1-Achsen Hinteranschlag X (Minderpreis)1-axes back gauge X (price reduction)
Werkzeuge / toolsVerschiedenste Werkzeuge vom preiswerten Amada-Promecam Systemwerkzeug bis hin zum WILA Präzisionswerkzeug.Individuelle Ober- und Unterwerkzeuge sind ebenfalls schnell verfügbar - fragen Sie einfach nach unserem gesonderten Werkzeugkatalog oder laden Sie sich diesen unter folgendem Link herunter: http://www.hesse-maschinen.com/werkzeugkatalog.pdf
Various tools from reasonable Amada-Promecam system tool up to WILA precision tool.Individual upper and lower tools are also available fast – please ask for our separate tools catalogue or download it yourself under the following link: http://www.hesse-maschinen.com/werkzeugkatalog.pdf
Oberwerkzeug 75°, leicht gekröpft, Radius gehärtet, geschliffen und geteiltupper tool 75°, light cranked, radius hardened, ground and sectioned
4-V Matrize 16/ 22/ 35/ 50 mm, Radien gehärtet, ge-schliffen und geteilt4-V die 16/ 22/ 35/ 50 mm, radius hardened, ground and sectioned
Alle HESSE CNC Abkantpressen entsprechen den aktuellen Sicherheits- und CE-Bestim-mungen und sind unter anderem mit einem Laser-Sicherheitssystem an der Maschinen-Vorderseite ausgerüstet
All HESSE CNC press brakes comply with the actual safety and CE-regulations and are equipped (among other things) with laser safe-ty device on the machine front.
Sicherheit / safety
Werkzeug-Schnellklemmung (Option)quick tool clamping (optional
5Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
Bombierung / anti deflection
Um auch bei längeren Biegeteilen einen durchgehend konstanten Biegewinkel zu erhalten kommt die Bombiervorrichtung zum Einsatz.Alle Modelle besitzen eine motorische Tischbombiervorrichtung die über die CNC Steuerung automatisch geregelt wird.
To get a constant bending angle over the whole length also on longer work pie-ces a anti deflection system is used.All models are equiped with a motorized table anti deflection system which is controlled by CNC.
6 Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
Blechauflagearme auf leichtgängigen Linearführungenmit T-Nuten und Kippanschlägenlinear guided sheet support armswith T-slots and tilt stops
Oberbalkenführung und Linearmessgeberupper beam guiding and linear measuring system
Weitere Standardausrüstung / further standard equipment
Biegetabelle / bending chart
7Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
AP3-AP4 Biegehilfen mit Gleitführung (Option)AP3-AP4 sheet follower with sliding guide (optional)
Lasermesssystem für den Biegewinkel (Option)laser based measuring device for bending angle (optional)
Optionale Ausrüstung / optional equipment
Matrizenverschiebeeinrichtung (Option)die moving unit (optional)
2 x CNC plus+ 3D 60400 in Tandemkonfiguration mit CNC Steuerung CYBELEC ModEva 10 S und Blechzuführeinrrichtung2 x CNC plus+ 3D 60400 in tandem configuration with CNC control CYBELEC ModEva 10 S and sheet feeding unit
hydr. Ober- und Unterwerkzeugklemmung für WILA Werkzeuge (Option)hydr. upper and lower tool clamping for WILA tools (optional)
8 Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
CNC plus+ 3D 60400 mit CNC Steuerung CYBELEC ModEva 10 Sund Lasermesssystem für den BiegewinkelCNC plus+ 3D 40220 with CNC control CYBELEC ModEva 10 Sand laser based measuring device for bending angle
CNC plus+ 3D 40220 mit CNC Steuerung CYBELEC ModEva 10 SCNC plus+ 3D 40220 with CNC control CYBELEC ModEva 10 S
9Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
Anlage zur Lichtmastenfertigungmachine to manufacture lamp poles
Roboteranbindung (Option)roboter integration (option)
CNC eco 1240 2040 2060 25100 30100 30135 30175 30220 30320 37175Presskraft / bending force ton 40 40 60 100 100 135 175 220 320 175Biegelänge / bending length A mm 1.250 2.050 2.050 2.550 3.050 3.050 3.050 3.050 3.050 3.700Abstand zwischen den Ständern / distance between columns B mm 1.050 1.650 1.700 2.200 2.600 2.600 2.600 2.600 2.600 3.100
Eilgang / rapid speed mm/sec 75 75 200 180 180 160 120 120 100 120Biegegeschwindigkeit / working speed mm/sec 9 9 10 10 10 10 10 10 10 10Rückzugsgeschwindigkeit / return speed mm/sec 50 50 120 120 120 120 100 100 100 100Bombierung / crowning mot. mot. mot. mot. mot. mot. mot. mot. mot.Einbauhöhe / daylight D mm 370 370 530 530 530 530 530 530 630 530Tischbreite / table width G mm 104 104 104 104 104 104 104 104 154 104Tischhöhe / table height F mm 828 828 900 900 900 900 900 900 900 900Hub / stroke C mm 160 160 265 265 265 265 265 265 365 265Ausladung / throat depth E mm 350 350 410 410 410 410 410 410 410 410Auflegearme / support arms 2 2 2 2 2 2 2 2 2 2Hinteranschlag-Fingerblöcke / back gauge finger blocks 2 2 2 2 2 2 2 2 2 2
Hinteranschlaggeschwindigkeit / speed of travel in X-axis
CNC eco
mm/sec250
250250 250 250 250 250 250 250 250
CNC plus+ 3D 500 500 500 500 500 500 500 500 500Hinteranschlagbereich / travel in X-axis
CNC eco
mm430
430430
650 650 650 650 650 650 650CNC plus+ 3D 500 650
max. Geschwindigkeit R-Achse / max. speed of travel in R-axis mm/sec 300 300 350 350 350 350 350 350 350 350
Verfahrbereich R-Achse / travel in R-axis mm 200 200 250 250 250 250 250 250 250 250Öltank / oiltank capacity It 60 60 100 100 100 150 250 250 250 250Motorleistung / motor power kW 4,0 4,0 7,5 11,0 11,0 15,0 18,5 22,0 37,0 18,5Länge / length L mm 2.100 2.400 3.300 3.800 4.200 4.200 4.250 4.250 4.300 4.950Breite / width W mm 1.250 1.250 1.650 1.670 1.670 1.680 1.700 1.770 1.820 1.700Höhe / height H mm 2.400 2.400 2.750 2.750 2.750 2.750 2.750 2.900 3.230 2.900Gewicht ca. / weight approx. kg 3.200 4.060 6.100 8.900 9.500 10.500 11.500 12.500 17.500 13.000
CNC eco 37220 40175 40220 40320 40400 40600 60220 60320 60400Presskraft / bending force ton 220 175 220 320 400 600 220 320 400Biegelänge / bending length A mm 3.700 4.050 4.050 4.050 4.050 4.050 6.050 6.050 6.050Abstand zwischen den Ständern / distance between columns B mm 3.100 3.600 3.600 3.600 3.400 3.100 5.100 5.100 5.100
Eilgang / rapid speed mm/sec 120 120 120 100 100 80 100 100 100Biegegeschwindigkeit / working speed mm/sec 10 10 10 10 8 7 10 10 8Rückzugsgeschwindigkeit / return speed mm/sec 100 100 100 100 80 80 100 100 80Bombierung / crowning mot. mot. mot. mot. mot. mot. mot. mot. mot.Einbauhöhe / daylight D mm 530 530 530 630 630 700 530 630 630Tischbreite / table width G mm 104 104 104 154 300 300 154 154 300Tischhöhe / table height F mm 900 900 900 900 1.040 990 1.100 1.100 1.220unter Flur / depth of pit F1 - - - - - 1.200 - - -Hub / stroke C mm 265 265 265 365 365 365 265 365 365Ausladung / throat depth E mm 410 410 410 410 510 510 410 410 510Auflegearme / support arms 2 2 2 2 2 2 4 4 4Hinteranschlag-Fingerblöcke / back gauge finger blocks 2 2 2 2 2 2 4 4 4
Hinteranschlaggeschwindigkeit / speed of travel in X-axis
CNC eco
mm/sec250 250 250 250 250 250 250 250 250
CNC plus+ 3D 500 500 500 500 350 350 350 350 350Hinteranschlagbereich / travel in X-axis mm 650 650 650 650 750 750 750 750 750max. Geschwindigkeit R-Achse / max. speed of travel in R-axis mm/sec 350 350 350 350 300 300 300 300 300
Verfahrbereich R-Achse / travel in R-axis mm 250 250 250 250 250 250 250 250 250Öltank / oiltank capacity It 250 250 250 250 450 500 250 250 500Motorleistung / motor power kW 22,0 18,5 22,0 37,0 37,0 45,0 22,0 37,0 37,0Länge / length L mm 4.950 5.250 5.250 5.300 5.750 5.650 7.500 7.500 7.500Breite / width W mm 1.770 1.700 1.770 1.910 2.110 3.250 1.770 1.910 2.110Höhe / height H mm 2.900 2.750 2.900 3.230 3.540 3.825 3.250 3.450 3.710Gewicht ca. / weight approx. kg 14.360 13.100 15.000 21.000 27.000 40.500 20.840 28.500 36.000
Technische Daten / technical details
10 Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
CNC plus+ 3D 60600 60800 70800 701000 701250 80800 801000 801250 801600 802000Presskraft / bending force ton 600 800 800 1.000 1.250 800 1.000 1.250 1.600 2.000Biegelänge / bending length A mm 6.050 6.050 7.050 7.050 7.050 8.050 8.050 8.050 8.100 8.100Abstand zwischen den Ständern / distance between columns B mm 5.100 5.100 5.100 5.100 5.100 6.400 6.400 6.400 6.400 6.400
Eilgang / rapid speed mm/sec 80 70 80 70 70 80 70 70 70 70Biegegeschwindigkeit / working speed mm/sec 7 6 7 5 7 7 5 7 6 6Rückzugsgeschwindigkeit / return speed mm/sec 80 80 70 60 70 70 60 70 70 60
Bombierung / crowning mot. hyd. hyd. hyd. hyd. hyd. hyd. hyd. hyd. hyd.Einbauhöhe / daylight D mm 700 700 700 800 800 700 800 800 1.000 1.000Tischbreite / table width G mm 300 400 400 400 400 400 400 500 500 700Tischhöhe / table height F mm 990 800 800 800 900 800 800 900 900 950unter Flur / depth of pit F1 1.200 1.300 1.300 1.500 1.700 1.300 1.600 1.800 1.800 2.100Hub / stroke C mm 365 400 400 500 600 400 500 500 600 600Ausladung / throat depth E mm 510 610 610 610 610 610 610 610 610 750Auflegearme / support arms 4 4 4 4 4 4 4 4 4 4Hinteranschlag-Fingerblöcke / back gauge finger blocks 4 4 4 4 4 6 6 6 6 6
Hinteranschlaggeschwindigkeit / speed of travel in X-axis mm/sec 350 350 350 300 300 300 300 300 300 300
Hinteranschlagbereich / travel in X-axis mm 750 750 750 1.000 1.000 750 1.000 1.000 1.000 1.250max. Geschwindigkeit R-Achse / max. speed of travel in R-axis mm/sec 300 300 300 250 250 300 250 250 250 250
Verfahrbereich R-Achse / travel in R-axis mm 250 250 250 250 250 250 250 250 250 250
Öltank / oiltank capacity It 500 750 750 1.000 1.250 750 1.000 1.250 1.250 2.000Motorleistung / motor power kW 45,0 55,0 55,0 55,0 90,0 55,0 55,0 90,0 90,0 110,0Länge / length L mm 7.600 8.050 8.700 8.800 8.800 9.800 10.000 10.000 10.100 10.500Breite / width W mm 2.650 3.200 3.200 3.250 3.250 3.200 3.250 3.250 3.500 4.350Höhe / height H mm 3.850 4.250 4.250 5.900 6.400 4.250 5.900 6.400 7.000 8.100Gewicht ca. / weight approx. kg 54.000 72.000 79.500 95.500 110.000 85.000 102.000135.000163.000249.000weitere Größen und Sondermaschinen auf Anfrage / further sizes and special machines on request
11Hydraulische CNC Abkantpressen HESSE CNC eco / hydraulic CNC press brakes HESSE CNC eco
HESSE+CO Maschinenfabrik GmbHIndustrizentrum NÖ-SüdStrasse 4 Objekt 8A-2351 Wiener NeudorfAUSTRIA
Tel.: +43/2236/638 70-0Fax: +43/2236/636 62
www.blechpower.com
ww
w.h
esse
-mas
chin
en.c
om
BEI HESSE IST IMMER
MESSE
Vertrauen Sie auf über 65 Jahre Erfahrung!
Die Firma HESSE+CO wurde 1947 als Hersteller von Blechbearbeitungsmaschinen gegründet. Seit 1980 sind wir spezialisiert auf Handel mit neuen und gebrauchten Blechbearbeitungs- und Werkzeugma-schinen. Wir haben ständig ungefähr 300 Maschinen in unserer 2.000 m² großen Ausstellungshalle, die nur 20 Minuten vom internationalen Flughafen Wien entfernt ist.
Trust in more than 65 years of experience! HESSE+CO was established in 1947 as a manufac-turer of sheet metal working machines. Since 1980 we have specialized in dealing with new and second hand sheet metal processing machines and machine tools. We always have approx. 300 machines availab-le in our 2.000 m² showroom, which is located only 20 minutes from the Vienna International Airport, waiting for your inspection.
Technische Änderungen, Irrtum und Druckfehler vorbehalten.Gültig bis auf Widerruf.
TÄGLICH AKTUALISIERTE LAGERLISTE UNTER www.hesse-maschinen.com