Upload
buimien
View
217
Download
0
Embed Size (px)
Citation preview
MEDENTIKA PREFACE® ABUTMENTS
imes-icore®
Datron D5®
Wissner Gamma 202®
Röders RXD®
Dental Concept DC5®
MB Maschinen Cobra Mill®
Die PreFace®-Linie von Medentika – intelligent entwickelt und gewissenhaft produziert.
internationalpatentpending
B-Serie4 PreFace®-Abutments
Mit PreFace®-Abutments sind Sie auf der sicheren Seite. Während die Durchmesser 11,5 und 16 Millimeter für die notwendige Variabilität sorgen, garantiert eine einheitliche Länge die exakte Nullpunktdefinition. Wir liefern Ihre PreFace®-Abutments im Übrigen immer inklusive der Abutmentschraube! Um Ihnen auch auf der Materialseite größtmög-liche Variabilität zu gewährleisten sind die PreFace-Abutments in Titan Grade 5 KV als auch in CoCr verfügbar.
Die Vorteile der PreFace®-Abutments auf einen Blick:
• Kurze Bearbeitungszeiten in der Produktion – durch zwei Rohlingsdurchmesser• Maximale Freiheit im Design – durch optimierte Auswahl der Fräsrohlinge• Maximaler Schutz für das exakt gestaltete Implantatinterface – durch Spannen des
Abutments lediglich auf der Stirnseite• Höchste Präzision im Interface – durch vorgefertigte, standardisierte Fertigungsprozesse• Mehr Freiheit bei der Gestaltung des Emergenzprofils – durch besondere Ausgestaltung der Rohlinge
PreFace Bibliothek verfügbar für:
So sieht Ihr neuer Spielraum für mehr unternehmerisches Potenzial aus: Mit PreFace®-Abutments und PreFace®-Abutmenthaltern steigen Sie in Ihre eigene Produktion ein. Gleichzeitig bleiben Sie flexibel in der individuellen Gestaltung Ihrer Abutmentlösungen.
5PreFace®-Abutments
Mit PreFace®-Abutmenthaltern erreichen Sie eine ausgezeichnete Wertschöpfung. Die op-timale Auswahl der Rohlinge, die minimale Anzahl der Komponenten und die Vorteile einer automatisierten Produktion führen zu extrem effizienten Fertigungsprozessen. Trotz im-menser Flexibilität in der Ausgestaltung Ihrer Produktion, erhalten Sie eine runde Gesamt-lösung aus einer Hand!
Ihre Vorteile des PreFace®-Abutmenthalters auf einen Blick:
• Wesentlich präzisere Fertigung als mit herkömmlichen Haltern – durch die innovative, einteilige Bauweise • Kurze Produktionszeiten – durch die gleichzeitige Bearbeitung von sechs Rohlingen in einem Arbeitsgang• Besonders zeitsparende Arbeitsweise – durch Spannung des Abutments mit lediglich einer Schraube im
Halter• Maximaler Schutz für das exakt gestaltete Implantatinterface – durch Spannen des
Abutments lediglich auf der Stirnseite • Sehr übersichtliche und für Fehler nicht anfällige Produktion – durch minimale Anzahl der Komponenten• Extrem günstige Investition – durch die einfache Bauweise des PreFace®-Abutmenthalters und die Ver-
meidung teurer Verschleißteile
PreFace®-Abutments sind verfügbar für:
Astra Tech OsseoSpeed®
Bio Horizons Internal®
Biomet 3i Certain®
Biomet 3i® AußenhexBredent Sky®
Conelog®
Dentsply-Friadent Frialit/Xive®
Medentika M-Implant®
MIS Implants®
Nobel Active®
Nobel Biocare Brånemark®
Nobel Biocare Replace Select®
Straumann Bone Level®
Straumann SynOcta®
Zimmer Tapered Screw-Vent®
B-Serie6 PreFace®-Abutments
This is how your new scope for more corporate potential will appear: You can launch your own production process with PreFace®-Abutments and PreFace®-Abutment holders. At the same time you continue to be flexible in terms of the individual design of your abutment solutions.
You are on the safe side with PreFace®-Abutments. Whilst the diameters of 11.5 and 16 millimetres ensure the necessary variability, a uniform length guarantees the precise definition of the zero point. Incidentally we always supply your PreFace®-Abutments complete with a abutment screw! To provide the widest possible variability of materials, the PreFace abutments are available in Titanium Grade 5 CF and CoCr.
The advantages of the PreFace®-Abutments at a glance:
• Short machining times in the production process - through two blank diameters• Maximum freedom of design - through the optimised selection of the milling blanks• Maximum protection for the precisely designed implant interface - through screwing the abutment tight
merely on the front side • Highest levels of precision in the interface - through preassembled, standardised manufacturing pro-
cesses• More freedom during the design of the emergence profile - through the special configuration of the
blanks
PreFace Library available for:
7PreFace®-Abutments
You achieve excellent added value with PreFace®-Abutment holders. The ideal selection of blanks, the minimum number of components and the advantages of automated pro-duction lead to extremely efficient manufacturing processes. Despite the immense flex-ibility in the design of your production you will receive a well-rounded complete solution from one source!
Your advantages of the PreFace®-Abutment holder at a glance:
• Much more precise manufacturing than is the case with conventional holders - due to the innovative, single-piece design
• Short production times - through the simultaneous machining of six blanks in one working process• Particularly time saving way of working - through the screwing tight of the abutment with just one screw
in the holder• Maximum protection for the precisely designed implant interface - through screwing the abutment tight
merely on the front side • Very transparent production process that is not susceptible to errors - through the minimum number of
components• Extremely cheap investment - through the simple design of the PreFace-Abutment holder and the avoid-
ance of expensive wearing parts
PreFace®-Abutments are available for:
Astra Tech OsseoSpeed®
Bio Horizons Internal®
Biomet 3i Certain®
Biomet 3i® AußenhexBredent Sky®
Conelog®
Dentsply-Friadent Frialit/Xive®
Medentika M-Implant®
MIS Implants®
Nobel Active®
Nobel Biocare Brånemark®
Nobel Biocare Replace Select®
Straumann Bone Level®
Straumann SynOcta®
Zimmer Tapered Screw-Vent®
9PreFace®-Abutments
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
B-Serie/B-Series kompatibel zucompatible with Sky Bredent®
PreFace® AbutmentImplantatanschluss Implant connection 3,5–5,5 3,5–5,5
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 25 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 25 Ncm
Durchmesser (mm) Diameter (mm) 11,5 16
Art.-Nr. TitanArt.-No. Titanium B 9000-R B 9000-16R
Art.-Nr. CoCrArt.-No. CoCr X B 9800-16R
D-Serie/D-Series kompatibel zucompatible with Conelog®
PreFace® AbutmentImplantatanschluss Implant connection 3,3 3,8/4,3 3,8/4,3
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 20 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 20 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16
Art.-Nr. TitanArt.-No. Titanium D 9000-R D 9010-R D 9010-16R
Art.-Nr. CoCrArt.-No. CoCr D 9800-R X D 9810-16R
E-Serie/E-Series kompatibel zucompatible with Nobel Biocare Replace Select®
PreFace® AbutmentImplantatanschlussImplant connection NP 3,5 RP 4,3 RP 4,3 WP 5,0 WP 5,0
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 35 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 35 Ncm
Durchmesser (mm) diameter (mm) 11,5 11,5 16 11,5 16
Art.-Nr. TitanArt.-No. Titanium E 9000-R E 9010-R E 9010-16R E 9020-R E 9020-16R
Art.-Nr. CoCrArt.-No. CoCr E 9800-R X E 9810-16R X E 9820-16R
PreFace®-Abutments
B-Serie10 PreFace®-Abutments
F-Serie/F-Series kompatibel zucompatible with Nobel Active®
PreFace® AbutmentImplantatanschluss Implant connection 3,0 NP 3,5 NP 3,5 RP 4,3/5,0 RP 4,3/5,0
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment 3,0: 15 Ncm• Empfohlenes Drehmoment NP/RP: 35 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque 3,0: 15 Ncm• Recommended torque NP/RP: 35 Ncm Durchmesser (mm)
Diameter (mm) 11,5 11,5 16 11,5 16
Art.-Nr. TitanArt.-No. Titanium F 9020-R F 9000-R F 9000-16R F 9010-R F 9010-16R
Art.-Nr. CoCrArt.-No. CoCr F 9820-R X F 9800-16R X F 9810-16R
H-Serie/H-Series kompatibel zucompatible with Biomet 3i Certain®
PreFace® AbutmentImplantatanschluss Implant connection 3,4 4,1 4,1 5,0
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 20 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 20 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16 16
Art.-Nr. TitanArt.-No. Titanium H 9000-R H 9010-R H 9010-16R H 9020-16R
Art.-Nr. CoCrArt.-No. CoCr H 9800-R X H 9810-16R H 9820-16R
I-Serie/I-Series kompatibel zucompatible with Biomet 3i® Außenhex
PreFace® AbutmentImplantatanschluss Implant connection 3,4 4,1 5,0
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 35 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 35 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16
Art.-Nr. TitanArt.-No. Titanium I 9000-R I 9010-R I 9020-16R
Art.-Nr. CoCrArt.-No. CoCr I 9800-R I 9810-R I 9820-16R
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
11PreFace®-Abutments
K-Serie/K-Series kompatibel zucompatible with Nobel Biocare Brånemark®
PreFace® AbutmentImplantatanschluss Implant connection NP 3,5 RP 4,1 WP 5,1
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 35 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 35 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16
Art.-Nr. TitanArt.-No. Titanium K 9000-R K 9010-R K 9020-16R
Art.-Nr. CoCrArt.-No. CoCr K 9800-R K 9810-R K 9820-16R
L-Serie/L-Series kompatibel zucompatible with Straumann Bone Level®
PreFace® AbutmentImplantatanschluss Implant connection NC 3,3 NC 3,3 RC 4,1/4,8 RC 4,1/4,8
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 35 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 35 Ncm
Durchmesser (mm) Diameter (mm) 11,5 16 11,5 16
Art.-Nr. TitanArt.-No. Titanium L 9000-R L 9000-16R L 9010-R L 9010-16R
Art.-Nr. CoCrArt.-No. CoCr X L 9800-16R X L 9810-16R
N-Serie/N-Series kompatibel zucompatible with Straumann SynOcta®
PreFace® AbutmentImplantatanschluss Implant connection NNC 3,5 RN 4,8 RN 4,8 WN 6,5 WN 6,5
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 35 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 35 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16 11,5 16
Art.-Nr. TitanArt.-No. Titanium N 9030-R N 9010-R N 9010-16R N 9020-R N 9020-16R
Art.-Nr. CoCrArt.-No. CoCr N 9830-R X N 9810-16R X N 9820-16R
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
B-Serie12 PreFace®-Abutments
R-Serie/R-Series kompatibel zucompatible with Zimmer Tapered Screw-Vent®
MIS® SEVEN (Innensechskant/Internal)
BioHorizons® (Innensechskant/Internal)
VERGLEICHSTABELLE Zimmer Tapered Screw-Vent® / MIS® Seven / BioHorizons®
COMPARISON CHART Zimmer Tapered Screw-Vent® / MIS® Seven / BioHorizons®
Zimmer Tapered Screw-Vent®
Platform 3,5 mm
Platform 4,5 mm
Platform 5,7 mm
Implantat/Implant Ø 3,70 4,10 4,70 6,00
Laborimplantat/Lab analog Ø 3,50 3,50 4,50 5,70Artikelnummer/Article Number IA3 IA3 IA4 IA5ImplantatanschlussImplant connectionMedentika R-Serie/R-Series Laborimplantat/Lab analog 3,5 3,5 4,5 5,7
Artikelnummer/Article Number R 50 R 50 R 51 R 52PreFace®-Abutment 3,5 3,5 4,5 5,7Artikelnummer/Article Number R 9000-R R 9000-R R 9010-R R 9020-16R
R 9000-16R R 9000-16R R 9010-16R
MIS® Seven Narrow-Platform
Standard-Platform
Wide-Platform
Implantat/Implant Ø 3,30 3,30 3,75 4,20 5,00 6,00
Laborimplantat/Lab analog Ø 3,30 4,20 4,20 4,20 4,50 4,50Artikelnummer/Article Number MN-RSM10 MD-RSM10 MD-RSM10 MD-RSM10 MW-RSM10 MW-RSM10ImplantatanschlussImplant connectionMedentika R-Serie/R-Series Laborimplantat/Lab analog XX 3,50 3,50 3,50 4,50 4,50
Artikelnummer/Article Number XX R 50 R 50 R 50 R 51 R 51PreFace®-Abutment XX 3,50 3,50 3,50 4,50 4,50Artikelnummer/Article Number XX R 9000-R R 9000-R R 9000-R R 9010-R R 9010-R
XX R 9000-16R R 9000-16R R 9000-16R R 9010-16R R 9010-16R
BioHorizons® Platform 3,0 mm
Platform 3,5 mm
Platform 4,5 mm
Platform 5,7 mm
Implantat/Implant Ø 3,00 3,80 4,60 5,80
Laborimplantat/Lab analog Ø 3,00 3,50 4,50 5,70Artikelnummer/Article Number TP3IA SYIA SGIA SBIAImplantatanschlussImplant connectionMedentika R-Serie/R-Series Laborimplantat/Lab analog XX 3,50 4,50 5,70
Artikelnummer/Article Number XX R 50 R 51 R 52PreFace®-Abutment XX 3,50 4,50 5,70Artikelnummer/Article Number XX R 9000-R R 9010-R R 9020-16R
XX R 9000-16R R 9010-16R
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
13PreFace®-Abutments
R-Serie/R-Series
PreFace® AbutmentImplantatanschluss Implant connection 3,5 3,5 4,5 4,5 5,7
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 30 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 30 Ncm
Durchmesser (mm) Diameter (mm) 11,5 16 11,5 16 16
Art.-Nr. TitanArt.-No. Titanium R 9000-R R 9000-16R R 9010-R R 9010-16R R 9020-16R
Art.-Nr. CoCrArt.-No. CoCr X R 9800-16R X R 9810-16R R 9820-16R
S-Serie/S-Series kompatibel zucompatible with Astra Tech OsseoSpeed®
PreFace® AbutmentImplantatanschluss Implant connection 3,0 3,5/4,0 3,5/4,0 4,5/5,0 4,5/5,0
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment
3,0: 15 Ncm / 3,5/4,0: 25 Ncm 4,5/5,0: 25 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque
3,0: 15 Ncm / 3,5/4,0: 25 Ncm 4,5/5,0: 25 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16 11,5 16
Art.-Nr. TitanArt.-No. Titanium S 9030-R S 9000-R S 9000-16R S 9020-R S 9020-16R
Art.-Nr. CoCrArt.-No. CoCr S 9830-R X S 9800-16R X S 9820-16R
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
B-Serie14 PreFace®-Abutments
T-Serie/T-Series kompatibel zucompatible with Dentsply-Friadent Frialit/Xive®
PreFace® AbutmentImplantatanschluss Implant connection 3,4 3,8 3,8
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment: 25 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque: 25 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16
Art.-Nr. TitanArt.-No. Titanium T 9000-R T 9005-R T 9005-16R
Art.-Nr. CoCrArt.-No. CoCr T 9800-R X T 9805-16R
Implantatanschluss Implant connection 4,5 4,5 5,5
Durchmesser (mm) Diameter (mm) 11,5 16 16
Art.-Nr. TitanArt.-No. Titanium T 9010-R T 9010-16R T 9020-16R
Art.-Nr. CoCrArt.-No. CoCr X T 9810-16R T 9820-16R
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
15PreFace®-Abutments
M-Implant
PreFace® AbutmentImplantatanschluss Implant connection 3,0 3,5-5,0 3,5-5,0
• Titan Grade 5 KV oder CoCr• inkl. Abutmentschraube • Empfohlenes Drehmoment:
3,00: 15 Ncm 3,5-5,0: 25 Ncm
• Titanium Grade 5 CF or CoCr• incl. abutment screw • Recommended torque:
3,00: 15 Ncm 3,5-5,0: 25 Ncm
Durchmesser (mm) Diameter (mm) 11,5 11,5 16
Art.-Nr. TitanArt.-No. Titanium 1-90-02 2-90-02 2-90-03
Art.-Nr. CoCrArt.-No. CoCr 1-90-03 X 2-90-06
17PreFace®-Abutments
imes-icore® 450i, 550i
PreFace® Abutmenthalter / Abutment Holderfür/for: imes-icore® 450i, 550i
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer. imes-icore GmbH Im Leibolzgraben 16 D-36132 Eiterfeld
imes-icore® 750i
PreFace® Abutmenthalter / Abutment Holderfür/for: imes-icore® 750i
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer. imes-icore GmbH Im Leibolzgraben 16 D-36132 Eiterfeld
Datron D5®
PreFace® Abutmenthalter / Abutment Holderfür/for: Datron D5®
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer.
DATRON AG In den Gänsäckern 5 D - 64367 Mühltal
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
B-Serie18 PreFace®-Abutments
Röders RXD®
PreFace® Abutmenthalter / Abutment Holderfür/for: Röders RXD®
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer. Röders GmbH Scheibenstraße 6 29614 Soltau
Wissner Gamma 202®
PreFace® Abutmenthalter / Abutment Holderfür/for: Wissner Gamma 202®
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer. Wissner GmbH August-Spindler-Straße 14 D-37079 Göttingen
Dental Concept Systems DC5® ohne Wechsler/without changer
PreFace® Abutmenthalter / Abutment Holderfür/for: Dental Concept Systems DC5® ohne Wechsler/without changer
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer. Dental Concept Systems GmbH Buchbrunnenweg 26 D- 89081 Ulm
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
19PreFace®-Abutments
Dental Concept Systems DC5® mit Wechsler/with changer
PreFace® Abutmenthalter / Abutment Holderfür/for: Dental Concept Systems DC5® mit Wechsler/with changer
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer. Dental Concept Systems GmbH Buchbrunnenweg 26 D- 89081 Ulm
MB Maschinen Cobra Mill 5A1, 5M®
PreFace® Abutmenthalter / Abutment Holderfür/for: MB Maschinen Cobra Mill 5A1, 5M®
Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden.
PreFace-Abutment holders must be ordered directly from the machine manufacturer.
MB Maschinen GmbH Zimmerwiesenweg 2/2a D- 63599 Biebergemünd
Bei Produkten, die mit ® gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers.Products indicated with ® are registered brand names of respective manufacturers.
EquipmentZubehör
Prüfkörper
• PreFace Abutmenthalter
Test block
• PreFace Abutment holder
Artikel-Nummer Article Number M 20
Drehmomentschlüssel • PreFace Abutmenthalter • inkl. Einsatz SW 3,0
Torque wrench
• PreFace Abutment holder • incl. insert SW 3,0
Artikel-Nummer Article Number M 21
Einsatz SW 3,0 • für Drehmomentschlüssel
Insert SW 3,0 • for torque wrench
Artikel-Nummer Article Number M 29
Präzision und Funktionalität: Implantatkomponenten made in Germany
Medentika GmbHHammweg 8–1076549 HügelsheimTel.: +49 (0)72 29-69912-0Fax: +49 (0)72 29-69912-20E-Mail: [email protected]