20
Microsoft 70-410: orig. Testfragen Version3.10 Microsoft 70-410: orig. Testfragen Version 3.10 Seite 1/ 341 Microsoft Zertifizierung Exam 70-410 Installing and Configuring Windows Server 2012 [479 Fragen/Antworten] Version 3.10 Originalfragen ins Deutsche übersetzt Antworten deutsch / teilw. die englische Antworten hinzugefügt Erläuterungen im Original belassen Bilder sind von engl. Serverversion übernommen

Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Embed Size (px)

Citation preview

Page 1: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 1/ 341

Microsoft Zertifizierung Exam 70-410

Installing and Configuring Windows Server 2012

[479 Fragen/Antworten]

Version 3.10

Originalfragen ins Deutsche übersetzt

Antworten deutsch / teilw. die englische Antworten

hinzugefügt

Erläuterungen im Original belassen

Bilder sind von engl. Serverversion übernommen

Page 2: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 2/ 341

Topic 1: Volume A

Frage 1:

Ihr Unternehmen verfügt über ein Hauptbüro und zwei Niederlassungen. Die Büros sind über eine

WAN-Verbindung vernetzt. In der Zentrale haben Sie einen Server mit Server1 benannt auf dem

Windows Server 2012 R2 ausgeführt wird. Server1 ist mit einer IP4 – Adresse konfiguriert.

Sie benötigen eine IPv6-Adresse für Server1. Die IP-Adresse muss privat und

routbar sein.

Welche IPv6-Adresse sollten Sie für Server 1 zuweisen?

A. fe80:ab32:145c::32cc:401b B. ff00:3fff:65df:145c:dca8::82a4 C. 2001:ab32:145c::32cc:401b D. fd00:ab32:14:ad88:ac:58:abc2:4 Antwort: D Erläuterung: Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses–such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 172.31.255.255–can be used on an IPv4 network. Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet. A unique local address is always structured as follows: The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.

Frage 2 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com. Die Domain enthält

einen Server mit dem Namen Server1. Server1 läuft unter Windows Server 2012 R2 und hat die

Hyper-V-Serverrolle installiert. Auf Server1 erstellen und starten Sie eine virtuelle Maschine mit dem

Namen VM1. VM1 ist so konfiguriert, wie

in der folgenden Tabelle dargestellt.

Sie benötigen eine Lösung zur Minimierung des Festplattenplatzes für die Verwendung des

checkpoints von VM1.

Was müssen Sie tun, bevor Sie den checkpoint erstellen?

A: Starten Sie das Resize-VHD Cmdlets.

B: Konvertieren Sie Disk1.vhd zu einer dynamisch wachsenden Platte.

C: Shutdown VM 1.

D: Starten Sie das Convert-VHD Cmdlets.

A. Run the Resize-VHD cmdlet. B. Convert Disk1.vhd to a dynamically expanding disk. C. Shut down VM1. D. Run the Convert-VHD cmdlet.

Antwort: C

Page 3: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 3/ 341

Erläuterung: Changing between a fixed and dynamic disk type does not alter the size of a SNAPSHOT much at all. However, since a snapshot is a record of a VMs state at the exact time that the snapshot was taken, shutting down the VM before taking the snapshot prevents the snapshot from having to contain all of the data in RAM (as there is no data in memory when a machine is powered down). The question states that the solution should minimize the amount of disk space used for the checkpoint of VM1. If the checkpoint is taken while VM1 is running, there will be two attritional files present at the checkpoint location; a .VSV with VM1 saved state files and a .BIN file which contains VM1’s memory contents. If, however, VM1 is shut down first, these files will not be created, thus saving disk space. In order to convert Disk1.vhd to a dynamically expanding disk, VM1 still have to be shut down.

Frage 3 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Gesamtstruktur mit dem Namen contoso.com.

Der Wald enthält zwei Domänen mit dem Namen contoso.com und child.contoso.com und zwei

Standorte die mit Site1 und Site2 benannt sind. Die Domänen und Standorte sind, wie in der

folgenden Tabelle angezeigt, konfiguriert.

Wenn die Verbindung zwischen Site1 und Site2 unterbrochen wurde, können sich die Anwender nicht

an Site2 anmelden.

Sie müssen identifizieren, was die Benutzer von site2 verhindert, sich an der Domäne

child.contoso.com anzumelden.

Was sollten Sie identifizieren?

A: Die Platzierung des globalen Katalogserver

B: Die Platzierung des Infrastrukturmasters

C: Die Platzierung der Domänennamenmaster

D: Die Platzierung des PDC-Emulators

A. The placement of the global catalog server B. The placement of the infrastructure master C. The placement of the domain naming master D. The placement of the PDC emulator

Antwort: D

Erläuterung:

The exhibit shows that Site2 does not have a PDC emulator. This is important because of the close interaction between the RID operations master role and the PDC emulator role. The PDC emulator processes password changes from earlier-version clients and other domain controllers on a best-effort basis; handles password authentication requests involving passwords that have recently changed and not yet been replicated throughout the domain; and, by default, synchronizes time. If this domain controller cannot connect to the PDC emulator, this domain controller cannot process authentication

Page 4: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 4/ 341

requests, it may not be able to synchronize time, and password updates cannot be replicated to it. The PDC emulator master processes password changes from client computers and replicates these updates to all domain controllers throughout the domain. At any time, there can be only one domain controller acting as the PDC emulator master in each domain in the forest. Frage 4 HOTSPOT / Topic 1: Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com. Auf allen Domänen-Controller wird Windows Server 2012 R2 ausgeführt. Alle Server sind so konfiguriert, dass AppLocker-Richtlinien durchgsetzt werden. Sie installieren einen Server mit Namen Server1. Auf Server1, installieren Sie in den Ordner C:\App1 die Anwendung mit dem Namen App1.exe. Sie haben zwei Domänengruppen mit Namen Gruppe1 und Group2. Der Benutzer User1 ist Mitglied der Gruppe1 und Gruppe2. Sie erstellen ein Gruppenrichtlinienobjekt (GPO) mit dem Namen GPO1. Sie verknüpfen GPO1 mit der Domäne contoso.com. Sie erstellen die ausführbaren Regeln, wie in der folgenden Übersicht angezeigt und nutzen den Assistenten für die Erstellung von ausführbaren Regeln (klicken Sie auf die Schaltflächen)

Zur Beantwortung füllen Sie jede Aussage nach den Angaben in der Übersicht aus. Jede richtige Auswahl wird mit einem Punkt bewertet.

Page 5: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 5/ 341

Antwort:

Frage 5 / Topic1:

Ihr Netzwerk enthält einen Server mit Namen Server1 auf dem Windows Server 2012 R2 ausgeführt wird. Server1 hat die Hyper-V-Rolle installiert. Server1 beherbergt vier virtuelle Maschinen mit Namen VM1, VM2, VM3 und VM4. Server1 ist, wie in der folgenden Tabelle, konfiguriert

Page 6: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 6/ 341

Sie müssen sicherstellen, dass VM1 mehr CPU-Zeit als die anderen virtuellen Maschinen verwenden

kann, wenn die CPUs auf Server1 unter einer hohen Last läuft.

Was sollten Sie konfigurieren?

A. NUMA topology B. Resource control C. resource metering D. virtual Machine Chimney E. The VLAN ID F. Processor Compatibility G. The startup order H. Automatic Start Action I. Integration Services J. Port mirroring K. Single-root I/O virtualization

Antwort: B

Erläuterung:

B. Resource controls provide you with several ways to control the way that Hyper-Vallocates resources to virtual machine. Resource control in used in the event where you need to adjust the computing resources of a virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify resource controls to automate how resources are allocated to virtual machines. References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx http://technet.microsoft.com/en-us/library/cc742470.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335

Frage 6 / Topic1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com.

Die Domäne enthält einen DHCP-Server mit dem Namen Server1, auf dem Windows Server 2012 R2

ausgeführt wird. Sie erstellen einen DHCP-Bereich mit dem Namen Scope1. Der Bereich hat eine

Startadresse mit 192.168.1.10, eine Endadresse mit 192.168.1.50 und eine Subnet Mask von

255.255.255.192.

Sie müssen sicherstellen, dass Scope1 eine Subnetzmaske von 255.255.255.0 hat.

Was sollten Sie zuerst tun?

Page 7: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 7/ 341

A. Von der DHCP-Konsole überbrücke Scope1.

B. Von der DHCP-Konsole lösche Scope1.

C. Von der DHCP-Konsole ändern Sie die Bereichsoptionen von Scope1.

D. Von Windows Powershell das Set-DhcpServerv4Scope Cmdlet ausführen.

A. From the DHCP console, reconcile Scope1. B. From the DHCP console, delete Scope1. C. From the DHCP console, modify the Scope Options of Scope1. D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.

Antwort: B Erläuterung: You cannot change the subnet mask of a DHCP scope without deleting the scope and recreating it with the new subnet mask. Set-DhcpServerv4Scope does not include a parameter for the subnet mask.

Frage 7 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com. Die Domain enthält

zwei Server mit Namen Server1 und Server2, auf denen Windows Server 2012 R2 ausgeführt wird.

Server1 hat die Gruppenrichtlinien-Management-Funktion installiert. Server2 hat die Druck- und

Dokument-Services-Serverrolle installiert.

Auf dem Server2 öffnen Sie die Druckerverwaltung und installieren einen Drucker mit Namen Printer1

unter Nutzung einen Gruppenrichtlinienobjekts (GPO) mit dem Namen GPO1.

Wenn Sie GPO1 auf Server1 öffnen, entdecken Sie, dass der bereitgestellte Druckerknoten nicht

angezeigt wird. Sie müssen den bereitgestelltne Druckerknoten in GPO1 anzeigen lassen. Was sollten

Sie tun?

A. auf Server1 ändern Sie die Gruppenrichtlinien-Filteroptionen von GPO1.

B. auf einem Domänencontroller einen zentralen Speicher für Gruppenrichtlinien erstellen.

C. auf Server2 installieren Sie die Gruppenrichtlinien-Management-Funktion.

D. auf Server1 konfigurieren Sie die Sicherheitsfilterung von GPO1.

A. On Server1, modify the Group Policy filtering options of GPO1. B. On a domain controller, create a Group Policy central store. C. On Server2, install the Group Policy Management feature. D. On Server1, configure the security filtering of GPO1.

Antwort: C

Erläuterung:

Pre-Requisites To use Group Policy for printer deployment you will need to have a Windows Active Directory domain, and this article assumes that your Domain Controller is a Windows 2008 R2 Server. You will also need the Print Services role installed on a server (can be on your DC), and you will be using the Print Management and Group Policy Management consoles to configure the various settings. It’s assumed that you have already followed Part One and have one or more printers shared on your server with the necessary drivers, ready to deploy to your client computers.

Frage 8 HOTSPOT / Toipc1:

Sie haben einen Hyper-V-Host mit Namen Server1 auf dem Windows Server 2012 R2 ausgeführt wird.

Server1 beherbergt 40 virtuelle Maschinen auf denen Windows Server 2008 R2 ausgeführt wird. Die

virtuellen Maschinen verbinden sich zu einem privaten virtuellen Switch. Sie haben eine Datei, die Sie

Page 8: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 8/ 341

auf alle virtuellen Maschinen kopieren möchten. Sie müssen unter Nutzung des Copy-VmFile-cmdlets

identifizieren, auf welche Server Sie die Datei kopieren können.

Welchen Befehl müssen Sie ausführen ?

Wählen Sie die entsprechenden Optionen im Antwortbereich aus.

Antwort:

Frage 9 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Gesamtstruktur mit Namen contoso.com. Der Wald enthält

zwei Domänen mit Namen contoso.com und child.contoso.com. Der Wald enthält zwei Domain

Controller. Die Domänen Controller sind, wie in der folgenden Tabelle dargestellt, konfiguriert.

Sie müssen sicherstellen, dass DC2 maßgebliche Antworten für Anfragen an contoso.com

Namespace zur Verfügung stellen kann.

Was sollten Sie tun?

A. auf DC1 eine Delegation erstellen. B. auf DC1 den Replikationsumfang der Zone contoso.com ändern. C. auf DC2 erstellen Sie einen Forwarder. D. auf DC2 ändern Sie die Einstellungen der Zonenübertragungen. A. On DC1, create a delegation. B. On DC1, change the replication scope of the contoso.com zone. C. On DC2, create a forwarder. D. On DC2, modify the Zone Transfers settings.

Antwort: B

Page 9: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 9/ 341

Erläuterung: For DC1 to be able to provide authoritative responses to DNS queries the replication scope should be changed accordingly so that it has the zone data for the contoso.com domain.

Frage 10 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com. Sie haben ein

Gruppenrichtlinienobjekt (GPO) mit dem Namen GP1, die mit der Domäne verknüpft ist. GP1 enthält

eine Richtlinie für Softwareeinschränkung, die eine Anwendung mit Namen App1 blockiert. Sie haben

einen Arbeitsgruppen-Computer der Computer1 genannt wird und auf dem Windows 8 läuft.

Eine lokale Gruppenrichtlinie auf Computer1 enthält eine Richtlinie zur Anwendungssteuerung, die

App1 Nutzung erlaubt. Sie melden Computer1 an die Domäne an. Sie müssen verhindern, dass App1

auf Computer1 läuft.

Was sollten Sie tun?

A. vom Computer1 den Befehl gpupdate / force ausführen.

B. von der Gruppenrichtlinienverwaltung eine Richtlinie zur Anwendungssteuerung GP1 hinzuzufügen.

C. von der Gruppenrichtlinienverwaltung aktivieren Sie auf GP1 die Erzwungen-Option.

D. in der lokalen Gruppenrichtlinien von Computer1 konfigurieren Sie eine Richtlinie für

Softwareeinschränkung.

A. From Computer1, run gpupdate/force.

B. From Group Policy Management, add an application control policy to GP1.

C. From Group Policy Management, enable the Enforced option on GP1.

D. In the local Group Policy of Computer1, configure a software restriction policy.

Antwort B:

Erläuterung:

AppLocker policies take precedence over policies generated by SRP on computers that are running an operating system that supports AppLocker. AppLocker policies in the GPO are applied, and they supersede the policies generated by SRP in the GPO and local AppLocker policies or policies generated by SRP.

Frage 11 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Gesamtstruktur mit Namen contoso.com. Auf allen Domain

Controllern läuft derzeit mit Windows Server 2008 R2.

Sie planen einen neuen Domänen Controller mit Namen DC4 zu installieren der unter Windows Server

2012 R2 läuft. Der neue Domänencontroller soll folgende Konfigurationen haben:

Schema-Master

Globale Katalogserver

DNS-Server-Serverrolle

Active Directory-Zertifikatsdienste-Serverrolle

Schema master Global catalog server DNS Server server role Active Directory Certificate Services server role

Sie müssen die Konfigurationen identifizieren die nicht mit Hilfe des Active Directory Domain Services-

Konfigurations-Assistenten erfüllt werden.

Welche zwei Konfigurationen sollten Sie identifizieren?

(Jede richtige Antwort ist Teil der Lösung. Wähle zwei.)

Page 10: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 10/ 341

A. installieren Sie die DNS-Serverrolle

B. aktivieren Sie den globalen Katalogserver

C. installieren Sie die Active Directory Zertifikat Services Rolle ADCS

D. übertragen Sie den Schemamaster

A. Install the DNS Server role. B. Enable the global catalog server. C. Install the Active Directory Certificate Services role. ADCS D. Transfer the schema master.

Antwort: C und D Erläuterung: Installation Wizard will automatically install DNS and allows for the option to set it as a global catalog server. ADCS and schema must be done separately

Frage 12 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen adatum.com. Die Domain enthält

einen Mitgliedsserver mit Namen Host1. Host1 läuft unter Windows Server 2012 R2 und hat die

Hyper-V-Serverrolle installiert.

Host1 hostet zwei virtuelle Maschinen mit Namen VM5 und VM6. Beide virtuellen Maschinen

verbinden sich mit einem virtuellen Switch mit Namen Virtual1.

Auf VM5 installieren Sie eine Netzwerk-Monitoring-Anwendung mit Namen Monitor1.

Sie müssen mithilfe von Monitor1 den eingehenden und ausgehenden Datenverkehr zu VM6

erfassen.

Welche zwei Befehle sollten Sie über Windows Powershell ausführen ?

(Jede richtige Antwort ist ein Teil der Lösung. Wähle zwei.)

A. Get-VM “VM6 | Set-VMNetworkAdapter-IovWeight 1 B. Get-VM “VM5 I Set-VMNetworkAdapter -IovWeight 0 C. Get-VM “VM5 | Set-VMNetworkAdapter -PortMirroring Source D. Get-VM “VM6 | Set-VMNetworkAdapter -AllowTeaming On E. Get-VM “VM6 | Set-VMNetworkAdapter -PortMirroring Destination F. Get-VM “VM5 | Set-VMNetworkAdapter -AllowTeaming On

Antwort: C und E

Erläuterung:

-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination. If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network adapter configured to receive the packets. If set to Destination, it receives copied packets from the source virtual network adapter. In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source. Reference: http://technet.microsoft.com/en-us/library/hh848457.aspx

Frage 13 HOTSPOT / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com. Die

Domain enthält einen Druckserver mit Namen Server1 auf dem Windows Server 2012 R2

ausgeführt wird.

Page 11: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 11/ 341

Sie teilen sich mehrere Drucker auf Server1.

Sie müssen sicherstellen, dass Sie die Druckerobjekte zugeordnet zu Server1 in Active

Directory Benutzer und Computer sehen können.

Welche Option sollten Sie wählen?

Für die Antwort wählen Sie die entsprechende Optionen im Antwortbereich.

Antwort:

Erläuterung:

Page 12: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 12/ 341

You can view printer objects in Active Directory by clicking Users, Groups, and Computers as containers from the View menu in the Active Directory Users and Computers snap-in. By default, printer objects are created under the machine object in which they are shared. After you turn on the Users, Groups, and Computers as containers option, you can see printers by expanding the printer's host computer.

Frage 14 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com.

Die Domäne enthält einen Domänencontroller mit dem Namen DC1, der die primäre DNS-Zone für

contoso.com hostet.

Alle Client-Computer sind so konfiguriert, dass DC1 als primären DNS-Server verwendet wird.

Sie müssen DC1 so konfigurieren um alle DNS-Anfragen aufzulösen, die durch die Abfrage des DNS-

Servers Ihres Internet-Service-Provider (ISP) nicht für die Zone contoso.com sind.

Was sollten Sie konfigurieren?

A. Naming Authority Pointer (NAPTR) DNS resource records (RR) B. Name server (NS) records C. A Forwarders D. Conditional forwarders

A. Naming Authority Pointer (NAPTR) DNS resource records (RR) B. Name server (NS) records C. A Forwarders D. Conditional forwarders

Antwort C:

Page 13: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 13/ 341

Erläuterung: On a network with several servers and/or client computers a server that is configured as a forwarder will manage the Domain Name System (DNS) traffic between your network and the Internet.

Frage 15 / Topic 1:

Ihr Netzwerk enthält eine Active Directory-Gesamtstruktur . Die Gesamtstruktur-Funktionsebene

Windows Server 2012 R2.

Die Gesamtstruktur enthält eine einzelne Domäne. Die Domäne enthält einen Mitgliedsserver namens

Server1. Server1 läuft unter Windows Server 2012 R2.

Sie kaufen ein Netzwerk-Scanner namens Scanner1, der Web Services on Devices (WSD)

unterstützt.

Sie müssen den Netzwerkscanner auf Server1 freigeben.

Welche Serverfunktion sollten Sie auf Server1 installieren ?

A. Web Server (IIS) B. Fax Server C. Print and Document Services D. File and Storage Services

Antwort: C

Erläuterung:

The Print and Document Services role allows for the configuration to share printers, scanners and fax devices. References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 1: Installing and Configuring servers, Objective 1.2: Configure servers, p. 8 http://technet.microsoft.com/en-us/library/hh831468.aspx

Frage 16 / Topic1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com.

Die Domäne enthält zwei Server namens Server1 und Server2, auf denen Windows Server 2012 R2

ausgeführt wird.

Sie erstellen mit dem Sicherheitsvorlagen snap-in eine Sicherheitsvorlage namens Template1.

Sie müssen Template1 auf Server2 anwenden.

Welches Tool sollten Sie verwenden?

A. Security Templates B. Computer Management C. Security Configuration and Analysis D. System Configuration

Antwort: C

Erläuterung:

A security policy is a combination of security settings that affect the security on a computer. You can use your local security policy to edit account policies and local policies on your A. Template was already created – Provide standard security option to use in security policies B. Needs to be applied at the GP level C. Security templates are inactive until imported into a Group Policy object or the SecurityConfiguration and Analysis D. Tool to ID windows problems

Page 14: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 14/ 341

Frage 17 / Topic1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com.

Die Domäne enthält einen Server namens Server1 auf dem Windows Server 2012 R2 ausgeführt wird.

Sie erstellen eine neue eingehende Regel mithilfe von Windows-Firewall mit erweiterter Sicherheit.

Sie müssen die Regel so konfigurieren um Server1 zu ermöglichen die unerwünschten eingehenden

Pakete zu akzeptieren, die durch ein Network Address Translation (NAT) Gerät im Netzwerk

empfangen werden.

Welche Einstellung in der Regel sollten Sie konfigurieren?

A: Schnittstellentypen

B: autorisierte Computer

C: Remote-IP-Adresse

D: Edge Traversal

A. Interface types

B. Authorized computers

C. Remote IP address

D. Edge traversal

Antwort: D

Erläuterung:

Edge traversal – This indicates whether edge traversal is enabled (Yes) or disabled (No). When edge traversal is enabled, the application, service, or port to which the rule applies is globally addressable and accessible from outside a network address translation (NAT) or edge device. Select one of the following options from the list: Block edge traversal (default) – Prevent applications from receiving unsolicited traffic from the Internet through a NAT edge device.

Allow edge traversal – Allow applications to receive unsolicited traffic directly from the Internet through a NAT edge device. Defer to user – Let the user decide whether to allow unsolicited traffic from the Internet through a NAT edge device when an application requests it. Defer to application – Let each application determine whether to allow unsolicited traffic from the Internet through a NAT edge device. Reference: http://technet.microsoft.com/en-us/library/cc731927.aspx

Frage 18 / Topic1:

Ein Drucker mit dem Namen Printer1 ist so konfiguriert, wie es in der folgenden Übersicht gezeigt wird

(Klicken Sie auf die Auswahl-Taste.)

Page 15: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 15/ 341

Zur Beantwortung, füllen Sie jede Aussage nach den Angaben wie in der Ausstellung angezeigt wird.

Jede richtige Auswahl ist einen Punkt wert.

Page 16: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 16/ 341

Antwort:

Erläuterung:

* The printer is paused. * Jobs can always be permitted (even if the printer is paused, or printer not started). Note: StartTime Date and time that a printer can start to print a job — if the printer is limited to print at specific times. This value is expressed as the time elapsed since 12:00 AM GMT (Greenwich Mean Time). This is sort of a trick question. As it stands, when the PowerShell script was executed, the printer is in "Paused" status, so any submitted job will go to the queue and remain there until the status is "Available". As for the ability to submit a job, a user can SUBMIT the job at any time. If it is outside of the printer's availability range, it will simply remain in the queue until the printer's start time is reached.

Frage 19 Drag and Drop / Topic1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com.

Die Domäne enthält zwei Server mit den Namen Server1 und Server2. Server1 und Server2 betreiben

einen Server mit einer GUI-Installation von Windows Server 2012 R2.

Sie entfernen die grafischen Management-Tools und Infrastruktur-Funktion auf Server2.

Sie müssen Server2 neu starten.

Was sollten Sie tun?

(Zum Beantworten ziehen Sie die entsprechenden Werkzeuge zu den richtigen Aussagen.

Jedes Werkzeug kann einmal verwendet werden, mehr als einmal oder gar nicht.

Möglicherweise müssen Sie die Trennleiste zwischen den Zellen ziehen oder blättern um den Inhalt zu

sehen.)

Page 17: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 17/ 341

Antwort:

Erläuterung:

When you uninstall "Server-GUI-Shell" you are left with a "Minimal Server Interface" server. So, File Explorer and IE10 are unavailable, but MMC and Server Manager work and MMC and Server Manager will allow you to restart server2 either locally or remotely from Server1. References:

Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p.44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p.19-22

Frage 20 Drag and Drop / Topic1:

Sie planen einen DHCP-Server bereitzustellen, der vier Subnetze unterstützt. Die Subnetze werden

konfiguriert, wie in der folgenden Tabelle dargestellt.

Sie müssen die Netzwerk-ID identifizieren, die Sie für jedes Subnetz verwenden werden sollten.

Was sollten Sie identifizieren?

Zum B

eantworten, ziehen Sie das entsprechende Netzwerk-ID an den Strand Subnetz in dem Antwort-

Bereich.

Page 18: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 18/ 341

Antwort:

Erläuterung:

Page 19: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 19/ 341

References: Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6 addressing, p.192, 196

Frage 21 / Topic1:

Ihr Netzwerk enthält eine Active Directory-Domäne mit dem Namen contoso.com.

Die Domäne enthält zwei Server mit dem Namen Server1 und Server2.

Server1 läuft unter Windows Server 2012 R2.

Server2 läuft unter Windows Server 2008 R2 Service Pack 1 (SP1) und hat die DHCP-Serverrolle

installiert.

Sie müssen DHCP auf Server2 mit Hilfe der DHCP-Konsole auf Server1 verwalten.

Was sollten Sie zuerst tun?

A. Von Windows Powershell auf Server2 das Enable-PSRemoting Cmdlets ausführen.

B. Von Windows Powershell auf Server1 das Install-Windows-Feature ausführen.

C. Von der Windows-Firewall mit erweiterter Sicherheit auf Server2 eine eingehende Regel erstellen.

D. Über Internet Explorer auf Server2 Windows Management Framework 3.0 herunterladen und

installieren.

A. From Windows PowerShell on Server2, run Enable-PSRemoting cmdlet. B. From Windows PowerShell on Server1, run Install-Windows Feature. C. From Windows Firewall with Advanced Security on Server2, create an inbound rule. D. From Internet Explorer on Server2, download and install Windows Management Framework 3.0.

Antwort: B

Erläuterung:

When the DHCP role is installed, it appears that the firewall rules are automatically added, so C is not valid (not only that, but either way it is an existing rule that one would need only enable nonetheless, not create a new rule). This means you only need to add the DHCP Manager MMC snap-in which is a Role Administration Tool feature. So the correct answer must be B. References: Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6 Network Administration, p.228

Frage 22 / Topic1:

Sie haben einen Hyper-V-Host namens Server1 auf dem Windows Server 2008 R2 ausgeführt wird.

Page 20: Microsoft Zertifizierung Exam 70-410 Installing and ...pebo2000.de/data/documents/DEMO-Microsoft-70-410-deutsch.pdf · Installing and Configuring Windows Server 2012 [479 Fragen/Antworten]

Microsoft 70-410: orig. Testfragen Version3.10

Microsoft 70-410: orig. Testfragen Version 3.10 Seite 20/ 341

Alle virtuellen Maschinen auf Server1 verwenden VHDs.

Sie installieren die Hyper-V-Serverrolle auf einem Server namens Server2 und Windows Server 2012

R2 ausgeführt wird. Server2 hat die gleichen Hardware-Konfigurationen wie Server1.

Sie planen Hyper-V-Host von Server1 auf Server2 zu migrieren, indem Sie die Windows Server-

Migrationstools verwenden.

In der unten stehenden Tabelle identifizieren Sie, was mit Hilfe der Windows Server-Migrationstools

migriert werden kann.

Machen Sie nur eine Auswahl in jeder Zeile. Jede richtige Auswahl ist einen Punkt wert.

Antwort:

Erläuterung: