Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Döllken ist weltweit vor OrtDöllken is on your doorstep, wherever you are in the world
EUROPE
Döllken-Kunststoffverarbeitung GmbHGladbeck/Germanywww.doellken-kv.com
Surteco France S.A.S.Beaucouzé/Francewww.fr.surteco.com
Surteco Italia s.r.l.Martellago VE/Italywww.it.surteco.com
Surteco Dekor A.Ş.İstanbul/Turkeywww.tr.surteco.com
AMERICA
Surteco USA Inc.Greensboro/USAwww.na.surteco.com
Surteco Canada Ltd.Brampton/Canadawww.na.surteco.com
Surteco OOOMoscow/Russiawww.ru.surteco.com
Surteco IberiaMadrid/Spainwww.es.surteco.com
Döllken SP. z o.o.Katowice/Polandwww.doellken.pl
SURTECO UK Ltd.Burnley Lancashire/UKwww.uk.surteco.com
Canplast Mexico S.A. de C.V.Chihuahua/Mexicowww.canplast.com.mx
Surteco Do Brasil S.A.Curitiba/Brasilwww.canplast.com
Canplast Sud S.A.Santiago/Chilewww.canplastsud.cl
ASIA
Surteco Pte. Ltd.Singaporewww.sg.surteco.com
AUSTRALIA
Surteco Australia Pty. Ltd.New South Wales/Australiawww.au.surteco.com
DekorverbundlisteDas Kanten-Sofort-Programm von Döllken – 2015
Cross reference list The Instant Edgeband Programme from Döllken – 2015
ProduktvariantenProduct variations
3D Kante aus transparentem Acryl, von hinten bedruckt, mit einzigartiger Tiefenwirkung und 3D-Effekt. Das Dekor bleibt auch beim Anfräsen von Radien und beim Kopierfräsen vollständig erhalten und ist vor Beschädigungen von außen absolut geschützt.
3D Edgeband in transparent acrylic, reverse printed, giving an unique impression of depth and 3D effect. The decorative finish is entirely retained after radius milling and profiling and is fully externally protected against damage.
HG (Hochglanz) Einfarbig bedruckte Oberfläche, homogen durchgefärbt, Oberfläche mit speziellem Hochglanzlack versiegelt.
HG (High gloss) Unicolour or printed surface, homogenous colour finish, surface sealed with special high gloss lacquer.
DC (Dekor)Bedruckte Oberfläche, homogen durchgefärbt, Oberfläche mit UV-gehärtetem Acryllack versiegelt.
DC (Surface print)Printed surface, homogenous colour finish, surface sealed with UV-hardened acrylic lacquer.
SF (Sonderfarbe/Uni) Einfarbig, homogen durchgefärbt.
SF (Special colour/unicolour) Unicolour, homogenous colour finish.
321
Deko
rverb
und
liste
– D
as K
ante
n-So
fort-
Prog
ram
m v
on D
öllke
n –
2015
Cro
ss r
efe
rence li
st –
The
Inst
ant E
dgeb
and
Prog
ram
me
from
Döl
lken
– 20
15
Produktvarianten | Product variantions
2 319 320
PrägungenDie Döllken-Kanten sind nicht nur dadurch besonders, dass sie im perfekten Dekorverbund zur Platte stehen, sondern gleichzeitig eine genau abgestimmte Prägung aufweisen. So erhalten die Kanten eine natürliche Haptik. Döllken bietet hier-zu eine Vielzahl an unterschiedlichen Prägungen, um Möbeln Lebendigkeit zu verleihen. Die Reichweite geht von Miniperl-prägungen über Holzporen bis hin zu Matrix-Prägungen, die dem Möbel mit einem Wechselspiel von glänzenden und matten Strukturen eine natürliche Anmutung verleihen.
Embossed surfacesThe Döllken Edgebands are not only distinguished by the possibility of finding a surface print to perfectly match your board, but they also offer a perfectly matched embossing, giving edgebands a natural feel. With this in mind, Döllken offers various embossed surfaces to bring your furniture to life. The range extends from mini pearl embossing, wood grain and matrix embossing, giving the furniture a natural appearance through the interplay of glossy and matt structures.
Glatt (ohne Prägung)
Smooth (not embossed)
W 101
W 104 W 105 W 110
W 232 W 249W 200
P 7145 P 7166
W 111W 106
W 102
W 79
W 86 W 87 W 88
W 224
W 80
W 235
Schnell und einfach die passende Kante finden: www.kanten-finder.de
You can find the right edge- band quickly and easily: www.KSP-online.com
Notizen | Notes Prägungen | Embossed surfaces
Muster zu den gezeigten Prägungen senden wir Ih-nen auf Wunsch gerne zu.
We will gladly send you samples of embossed surfaces shown.
3
Inhaltsverzeichnis Table of contents Die Döllken-Kante . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Döllken Edgeband Das Kanten-Sofort-Programm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . . . . . . . . . . . . . . . The Instant Edgeband Programme Produktgruppen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product groups Zusatzprodukte und Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . . . . . . . . . . . Additional products and service Kanten-Finder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edgeband Finder Erläuterung der Dekorverbundliste . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . . . Explanation of the list of edgebands Döllken-Kanten im Dekorverbund zu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Döllken Edgebands to match 3B/Acrilux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3B/Acrilux 4ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4ST Abet/Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Abet/Print AGT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AGT Alvic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Alvic Annovati – Trombini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Annovati – Trombini Argolite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Argolite Arpa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Arpa ASD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASD Bucina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bucina Cleaf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaf Depalor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Depalor Duratex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Duratex Egger Eurodekore 2012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Egger Eurodekore 2012 Falco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Falco Fantoni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fantoni Finsa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Finsa Formica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Formica Funder Max/Isovolta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Funder Max/Isovolta Glunz/Novopan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Glunz/Novopan Gruppo Frati . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Grupo Frati Hornitex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hornitex Innovus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Innovus Isoroy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Isoroy Kaindl 2015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kaindl 2015 Kastamonu Entegre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Kastamonu Entegre Kronospan 2013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kronospan 2013 Kronoswiss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kronoswiss Lamicolor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lamicolor Liri . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Liri NCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NCS Niemann . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Niemann Orma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Orma Pfleiderer 2013 – 2016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pfleiderer 2013 – 2016 Polyrey 2013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polyrey 2013 Rafal-Trombini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rafal-Trombini RAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RAL Resopal/Wilsonart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Resopal/Wilsonart Sacic-Saviola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sacic-Saviola Saib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Saib Sareco Duhospan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sareco Duhospan Senosan/Senoplast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Senosan/Senoplast Sit-Saviola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sit-Saviola Sonae/Tafibra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sonae/Tafibra Starwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starwood Teverpan/Tevermdf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Teverpan/Tevermdf Top Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Top Form Unilin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Unilin Westag & Getalit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Westag & Getalit Xilopan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Xilopan Yildiz Entegre/Sunta/MDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Yildiz Entegre/Sunta/MDF Kanten-Galerie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edgeband Gallery Döllken 3D-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Döllken 3D Edgebands Hochglanz-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High-gloss Edgebands Uni-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unicolour Edgebands Dekor-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface print Edgebands Digital-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digital Edgebands Verarbeitungsanleitungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Application instructions Döllken ABS-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Döllken ABS Edgebands Döllken 3D-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Döllken 3D Edgebands Döllken PP-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Döllken PP Edgebands Döllken PVC-Kanten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Döllken PVC Edgebands allg . technische Verarbeitungsinformationen . . . . . . . . . . . 312 . . . . . . . . . . . . . . . . .gen. technical application information
4 5
Der perfekte Übergang Kantenlösungen von Döllken stehen für absolute Dekorgleichheit.
Dekor und Kante müssen optimal aufeinander abgestimmt sein – egal wie ausgefallen die Oberflächen mittlerweile sind. Trotz der neuen Designvielfalt im Markt können Sie gelassen bleiben. Denn von Döllken bekommen Sie mit Sicherheit die passende Kante für Ihr Projekt.
Verlässliche KompetenzDass Kante und Dekor am Ende eine harmonische Einheit bilden, kommt nicht von ungefähr. Als Mitglied der SURTECO SE greift Döllken auf das Know-how und die Erfahrung aus der gesamten Unternehmensgruppe zurück. Diese hat sich als Oberflächenspezialist bereits weltweit einen Namen gemacht. Hinzu kommt die enge Verbindung zu Handwerk und Industrie, die zielgruppengerechte Lösungen erst möglich macht.
Mehr als eine gute OptikDie Nachfrage nach gesunden und nachhaltigen Produkten steigt. Dank Greenguard-Zertifizierung können Sie belegen, dass Döllken-Kanten sowohl mit ihren äußeren als auch mit ihren inneren Werten überzeugen.
Expertise you can rely onEnsuring a harmonious relationship between edgeband and surface print is no accident. As a member of SURTECO SE, Döllken draws on the expertise and experience of the entire group. This has already made it a global name as a specialist in surface technologies. What’s more, it has close ties to trade and industry, which means you can tailor solutions to suit your target groups.
More than just easy on the eyesThe demand for healthy and sustainable products is increa-sing. Thanks to Greenguard certification, you have the proof that Döllken Edgebands not only look good but are also kind to the environment.
Die Döllken-Kante | The Döllken Edgeband
The perfect transitionFor surface print matching, look no further than edgeband solutions from Döllken.
The surface finish and edgeband must be perfectly matched – no matter how extravagant the surface. Despite the variety of new designs in the market, you can relax because you can be sure that Döllken will give you the right edgeband for your project.
Passt nicht, gibt‘s nicht!
Can’t find the right match? Look no further!
6 7
Projekte pünktlich abschließen Das Kanten-Sofort-Programm (KSP 2.0) von Döllken macht’s möglich.
Mit dem Kanten-Sofort-Programm bleiben Sie flexibel im Tagesgeschäft und halten versprochene Liefertermine problemlos ein. Denn zu über 10.000 Dekoren international führender Hersteller sind die passenden Kanten inner-halb von 24 Stunden verfügbar. Ab einem Meter Länge und in unterschiedlichsten Breiten.
Finish your projects with time to spare The Instant Edgeband Programme (KSP 2.0) from Döllken makes it possible.
With the Instant Edgeband Programme, you remain flexible with your day-to-day business and can keep promised delivery dates without a hitch. After all, we have over 10,000 finishes matched to the leading international board and laminate manufacturers, all available within 24 hours. From 1 meter lengths and in a variety of widths.
Das Kanten-Sofort-Programm | The Instant Edgeband Programme
24hLieferung
Zu über 10.000 Platten die passenden Kanten.
The right edgeband to match over 10,0000 different boards.
8 9
Ihre Vorteile im Überblick: Lieferung innerhalb von 24 h ab dem ersten Meter
Dekor- und Farbgleichheit über alle Breiten Kleinmengen aus unbegrenztem Farbpool produzierbar
Direkt zur Wunschkante über den digitalen Kantenfinder: www.Kanten-Finder.de
Advantages for you at a glance: Delivery within 24 hours from the first metre Surface print and colour consistency across all widths
Small quantities can be produced from an unlimited range of colours
Find the edgeband you’re looking for now using the online Edgeband Finder: www.KSP-online.com
Breiten von 16 bis 100 mm ab Lager | Widths from 16 to 100 mm in stock
Perfekter Dekorverbund | Perfect match for your surface print
Kanten bereits ab 1 Meter erhältlich | Edgebands available from just one metre
Immer die passenden Kanten zu den neuesten Kollektionen Always the right edgebands to match the latest collections
Bedarfsgerechte Lieferung Lästige Lagerhaltung von Restmengen gehört für Sie der Ver-gangenheit an. Wir liefern bedarfsgerechte Mengen ab dem ersten Meter just in time für Ihr Projekt. Für Sie schneiden wir unsere Kanten flexibel auf, so ist jede Länge und Breite möglich.
Individuelle Kleinmengen Über das Quick-Shot-Programm produzieren wir für Sie jede Farb-/Dekor-, Präge- und Abmessungskombination ab 450 m innerhalb von nur fünf Werktagen. Dadurch haben Sie über das KSP hinaus einen Zugang zu mehr als 1.000.000 Kanten-bandartikelkombinationen
Delivery based on requirementsThe inconvenient storage of leftover quantities is a thing of the past. We supply the quantities that you need from the very first metre and just in time for your project. For you, we are flexible when it comes to cutting our edgebands, meaning any length and width is possible.
Individual small quantitiesThrough the Quick-Shot Programme, we offer every combina-tion of colour, surface print, embossing and dimension from 450 m, and do so within just five working days. You therefore have access to over 1,000,000 edgeband product combina-tions through KSP.
Das Kanten-Sofort-Programm | The Instant Edgeband Programme
Kundenwünsche erfüllen Die Vielfalt im KSP lässt viel Spielraum für Individualität.
Selbst ausgefallene Kundenwünsche können mit dem Kanten-Sofort-Programm zügig Wirklichkeit werden. Eine enorme Breitenvielfalt mit Dekorgleichheit über alle Abmessungen, bedarfsgerechte Lieferungen ab einem Meter Länge sowie die Bestellmöglichkeit von Kleinmengen aus unserem Quick-Shot-Programm bieten Ihnen dafür die Basis.
Meeting customer needs The diversity in the KSP leaves plenty of room for individuality.
Even unusual customer requests can quickly become a reality with the the Instant Edgeband Programme thanks to an enormous range of widths in matching surface prints across all dimensions, needs-based deliveries from one metre in length as well as the possibility of ordering small quantities from our Quick-Shot Programme.
Alles aus einer Hand – bedarfsgerecht, schnell, individuell.
Everything you need in one place – individual, with speed and based on your requirements.
10 11
Für jeden Anspruch die passende Lösung Unsere Produktgruppen in der Übersicht.
Sei es die Optik, der Einsatzort oder die zu erwartende Beanspruchung: An jede Kante werden ganz individuelle Ansprüche gestellt. Um Ihnen die Auswahl des passgenauen Modells so leicht wie möglich zu machen, haben wir unterschiedliche Produktgruppen entwickelt. Damit Sie sich einen Überblick über die vielfältigen Möglichkeiten verschaffen können, stellen wir Ihnen nachfolgend sowie auf den Seiten zur Kanten-Galerie die einzelnen Kantenarten und ihre Spezifikationen im Detail vor.
The right solution for every requirement An overview of our product groups.
Be it aesthetics, area of application or the expected demand, each edgeband must meet very different requirements. In order to make our range of matching styles as easy as possible for you, we have developed different product groups. For an overview of the many options, please see below and refer to the Edgeband Gallery pages for details and specifications for the edgeband types.
Produktgruppen | Product groups
FUSION EDGE – die Hochleistungskante für alle FügetechnologienDie FUSION EDGE sorgt für eine fugenlose Verbindung zwischen Kante und Platte. Sie kommt ohne zusätzlichen Schmelzkleber aus. Einmal verbunden bildet die FUSION EDGE mit allen gängigen Holzwerkstoffen eine feste Einheit. Möglich wird das dank innovativer Heißluft-Technik bzw. Hot-Air-Technologie, Laserfügeverfahren* und Plasma-Tech-nologie sowie NIR.
FUSION EDGE – the Highperformance Edgeband for all bonding technologies
FUSION EDGE provides a seamless bond between edgeband and board. It re-
quires no additional hot-melt adhesive. Once ap-plied, the FUSION EDGE
forms a solid unit with all widely used board materials. Innovative hot air technology makes this possible, as also does laser technology, plas-ma systems and infa red technology.
Supermatt-Kanten – überzeugen mit her-vorragenden OberflächeneigenschaftenSupermatt-Oberflächen für thermoplastische Kantenbänder, denen Kratzer und Markierungen absolut nichts anhaben können. Mit den Supermatt-Kanten von Döllken wird dieser Traum endlich Wirklichkeit. Besonders praktisch: Durch die in-novative Oberflächentechnologie wird die Produktion deutlich einfacher und schneller. Außerdem verlängert sich die Lebens-dauer der Kanten.
Super Matt Edgebands – impressive with their excellent surface
propertiesSuper Matt surfaces for thermo-
plastic edgebands offer com- plete resilience when it comes to scratches and marks. With the Super Matt Edgebands from Döllken, this dream is finally becoming
Dünnkanten – höchster Qualitätsstandard bei einer top Ökobilanz Im Dünnkanten-Lagerprogramm von Döllken stehen auf die gängigsten Plattenvarianten abgestimmte Farben und Dekore zur Verfügung. Dank des Werkstoffs ABS überzeugen die hochwertigen Kanten nicht nur durch eine hervorragende Ökobilanz, ein gutes Überspannungsvermögen und eine höhere Wärmefestigkeit, sondern auch durch ein präzises Druckbild, natürliche Prägungen sowie unterschiedliche Glanzgrade.
Thin Edgebands – the highest standard of quality with an excellent carbon footprint.The Thin Edgeband stock programme from Döllken offers colours and surface prints to match the most widely used board varieties. Thanks to ABS material, you will be impressed not only with the outstanding carbon footprint, its ability to to give a smooth overall sur-face finish and a higher heat resistance, but also the precision of the print pattern natural embossed surfaces and different gloss levels.
Ihre Vorteile im Überblick: Für alle Fügetechnologien geeignet Perfekte Optik dank fugenlosem Übergang Kein zusätzlicher Schmelzkleber notwendig Wärmeformbeständig und feuchtigkeitsresistent Höhere Produktionssicherheit und Produktivität Beste Anfangsadhäsion durch optimierten
Energiebedarf
Advantages for you at a glance: Suitable for all joining technologies Easy on the eye thanks to a seamless transition
No additional hot-melt adhesive necessary Heat resistant and humidity resistant Increased production reliability and productivity
Superior initial adhesion thanks to an optimised energy consumption
Ihre Vorteile im Überblick: Neueste Technologie für herausragende
Oberflächeneigenschaften Verbesserte Produktionskennzahlen dank
unkomplizierter Verarbeitung Auch nach Jahren noch so schön wie am
ersten Tag
Advantages for you at a glance: Latest technology for outstanding surface properties
Improved economy in production thanks to easy processing
Still looks amazing, even after many years
Ihre Vorteile im Überblick: Kleine Abnahmemengen und kurze Lieferzeiten Positive Ökobilanz des
Hightech-Kunststoffs ABS Gutes Überspannungsvermögen und hohe
Wärmestandfestigkeit Präzises Druckbild und natürliche Prägungen
Advantages for you at a glance: Small quantities and short delivery times Positive carbon footprint of the high-tech plastic ABS
Good smooth, uniform surface finish and high heat resistance
Precise printed finishes and natural embossed surfaces
a reality. Particularly practical: innovative surface technology has made manufacturing far easier and faster, also extending the service life of the edgeband.
* In Deutschland besteht für das Laserfügen patentrechtlicher Schutz der Firma Bulthaup. Für die Benutzung in Deutschland benötigen Sie deren Zustimmung.
12 13
Immer das passende Zubehör zur Hand In unserem umfangreichen Sortiment ist an alles gedacht.
Ein beeindruckendes Ergebnis entsteht, wenn alles optimal zusammenpasst. Deshalb bekommen Sie von Döllken das richtige Zubehör gleich mitgeliefert – alles aus einer professionellen Hand. Vom Döllken EVA Kleber (Hotmelt) über den Fugen-Versiegeler AQUA-STOP-PEN bis zum TOP-LINE Wandanschlussleisten-System.
Always the right accessories on hand Our extensive range has everything you need.
An impressive result is possible when everything fits together perfectly. That‘s why you can also get the right acces-sories provided by Döllken – all from a single professional supplier. From Döllken EVA glue (hot-melt) through to the AQUA-STOP PEN joint sealer and the TOP-LINE wall seal system.
Döllken Hotmelt – der Superkleber für eine perfekte VerbindungFür optimale Verklebungsergebnisse bekommen Sie von uns die Kante und den passenden Kantenkleber aus einer Hand. Direkt ab Lager sind Granulate und Patronen in den gängigsten Farben erhältlich.
Döllken hot-melt – the super glue for a perfect bondIf you want nothing but the best bonding results, we are your one-stop shop for edgebands and edgeband adhesive. The most popular colours of granules and cartridges are available straight from our stock.
Ihre Vorteile im Überblick: EVA Klebertypen für jeden Bedarf Verschiedene Farben (natur, weiß, braun und transparent)
Granulate und Patronen vorrätig Beste Ergebnisse für thermoplastische Kanten, Melamin- und Massivholzkanten
Bereits ab einer Vorschubgeschwindigkeit von 10 m geeignet
Advantages for you at a glance: EVA adhesive types for every requirement Different colours (natural, white, brown and transparent)
Granules and cartridges in stock Top results for thermoplastic edgebands, melamine and solid wood edgebands
Suitable for a machine feed speed from 10 m/min
Zusatzprodukte und Service | Additional products and service
Döllken AQUA-STOP-PEN – für eine zuverlässige Fugen-VersiegelungOb Wasser, Feuchtigkeit, Schmutz oder Wasserdampf – Fugen werden im Alltag stark beansprucht. Damit sie auch nach Jahren noch so gut aussehen wie am ersten Tag, hat Döllken den AQUA-STOP-PEN entwickelt. Dieser sorgt in Sekundenschnelle für eine sichere und lang- anhaltende Versiegelung der Fuge. Feuchtigkeit und Schmutz haben damit keine Chance mehr.
Döllken AQUA-STOP PEN – for reliable joint sealingWhether water, moisture, dirt, or water vapour – joints have to put up with a lot in everyday life. To ensure they look just as good after several years as they did on the very first day, Döllken has developed the AQUA-STOP-PEN. In seconds, this offers a secure and long-lasting seal for joints. Humidity and dirt are no match for this product.
Ihre Vorteile im Überblick: Zuverlässiger Schutz vor Quellungen im Fugenbereich
Langlebige und optisch ansprechende Fugen Einfache Handhabung Leichte Reinigung der behandelten Oberfläche
Advantages for you at a glance: Reliable protection against water absorption in the joint area
Durable and visually appealing joints Easy to use Easy cleaning of the treated surface
Ihre Vorteile im Überblick: Flexibel einsetzbar als Arbeitsplatten-, Wand- und Korpusanschluss
Vier ausgewählte, mit allen Stilrichtungen kombinierbare Farben (alu eloxiert, edelstahl gebürtstet, schwarz, weiß)
Innen-, Außenecken und Endklappen ab Lager
Geringe Lagerhaltungskosten durch bedarfsgerechtes Farbkonzept
Perfekte Haftung auf Fliesen, Granit, Schicht- stoff, Tapete, Mineralwerkstoff, Holz etc.
Advantages for you at a glance: Flexible use as a worktop, wall or unit sealant Four selected colours that can be com-bined with all styles (anodised aluminium, brushed stainless steel, black, white)
Internal, external corners and end caps available in stock
Low storage costs due to colour concepts to match the requirements
Perfect adhesion to tiles, granite, laminates, wallpaper, solid surface materials, wood etc.
Döllken TOP-LINE – das Wandanschluss-leisten-System für einen maßgeschneider- ten AbschlussÜberall dort, wo eine Fuge abgedichtet oder kaschiert werden soll, sorgt das innovative TOP-LINE Anschlussleisten-System von Döllken für ein perfektes Finish. Der Montageaufwand ist minimal, die optische Aufwertung hingegen maximal.
Döllken TOP-LINE – the wall seal system for a tailor
made finishWherever a joint is to be sealed or laminated, the innovative TOP-LINE sealant sys-tem from Döllken ensures a perfect finish. It takes litt-le effort to install this profile, but the visual results are stunning.
14 15
Mit Hilfe des digitalen Kanten-Finders braucht es nur wenige Klicks, um die passende Kante zu mehr als 10.000 Plattendekoren zu finden. Anhand der angezeigten Artikelnummer können Sie die Kante direkt bestellen. Fehler können sich so gar nicht erst einschleichen. Probieren Sie es direkt aus unter www.Kanten-Finder.de oder über den QR-Code:
Schnell und unkompliziert zur passenden Kante Der Kanten-Finder von Döllken weist Ihnen den Weg.
Your quick and easy route to the right edgeband The Edgeband Finder from Döllken will point you in the right direction.
Using the digital Edgeband Finder, it only takes a few clicks to find the right edgeband for over 10,000 board finishes. The online article number shown can be used to order the edgeband direct. Our system is easy to use. Try it right now at www.KSP-online.com or by using the QR code:
OR 1
1 Suche über den Hersteller Nach der Eingabe des Herstellernamens können Sie die Dekornummer auswählen. Daraufhin wird Ihnen direkt die passende Kante inklusive Prägung angezeigt.
OR Suche über die Dekornummer Neben einer unverbindlichen Farbdarstellung erhalten Sie weitere Informationen über die ausgewählte Farbe, bzw. das ausgewählte Dekor sowie die Prägung und die im Lager befindlichen Abmessungen.
So einfach funktioniert‘sUnter „Suche Kante zur Platte“ haben Sie zwei Auswahlmög-lichkeiten: die Suche nach einer Dekornummer von Döllken oder die Suche über den Hersteller Ihrer Platte. Wählen Sie einfach die gewünschte Option aus und finden Sie die perfekte Kante zu Ihrer Platte.
It‘s this easyUnder „Search edgeband for board“, you have two choices: search for a surface print number from Döllken or search by the manufacturer of your board. Simply choose the option you want and find the perfect edgeband for your board.
Search by manufacturer After entering the manufacturer‘s name, you can select the corresponding board reference. You will be shown the relevant edgeband immediately, including the embossing.
Search by surface print number You are not only shown the finish (our non binding
recommendation), but will also be given further in-formation on the colour chosen, and the selected surface print as well as the embossing and the dimensions available in stock.
Kanten-Finder | Edgeband Finder
OR
1
16 17
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
3B/Acrilux
Erläuterung der Dekorverbundliste | Explanation of the list of edgebands3B/Acrilux
Wir machen Ihnen den Weg zur passenden Kante leicht. In der tabellarischen Übersicht finden Sie alle Informationen, die Sie zur Zuordnung benötigen. Wie Sie die Tabelle richtig lesen, sehen Sie anhand des unten aufgeführten Beispiels.
Der perfekte DekorverbundSo finden Sie die passende Kante zu Ihrer Platte.
The perfect match for your surface print Looking for the right edgeband to match your board?
We make your search for a matching edgeband easy. In the table overview, you can find all the information you need on the types shown. The example given below shows you how to read the table correctly.
Hier finden Sie die Produkt-informationen zu Ihrer Platte (Artikelnummer und Prägung).
Find the product information for your board here (article number and embossing).
In folgenden Abmessungen ist Ihr Wunsch-Dekor erhältlich.
The surface print you require is available in the following dimensions.
Auf dieser Seite finden Sie ein
Kantenmuster.
This page illustrates an
edgeband design.
Das zu Ihrer Platte passende Dekor inklusive Prägung ist an dieser Stelle aufgelistet.
Find the surface print to match your board, including embossing, here.
Weitere Produktdetails zu Ihrer neuen Kante.
More product details on your new edgeband.
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1101 AT DC 88N4 W-111 n ABS DC E
1101 AW DC 49W4 P7145 n ABS DC E
1101 BS SF 79B2 W-87 n n ABS UNI C
1101 PE SF 79B2 W-200 n n ABS UNI C
1101 SM SF 79B2 GLATT n n ABS UNI C
1106 GL100 DC 263V GLATT n n n ABS HG P
1570 BS SF 4693 W-87 n n ABS UNI C
733301197Z DC 015R GLATT n n 3D DC P
269
260
245
245
245
229
242
250
A –
E
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1628Z DC 354Y GLATT n ABS HG P
733301181Z DC 19R8 GLATT n 3D 3D 2in1 P
733301197Z DC 015R GLATT n n 3D DC P
733301500Z DC 210R GLATT n n 3D DC P
733301851Z DC 25R1 GLATT n 3D 3D 2in1 P
733303490Z DC 19R6 GLATT n 3D 3D 2in1 P
733304330Z DC 24R8 GLATT n 3D 3D 2in1 P
733304530Z DC 25R2 GLATT n 3D 3D 2in1 P
733390730A DC 19R8 GLATT n 3D 3D 2in1 P
733390731A DC 25R1 GLATT n 3D 3D 2in1 P
733390732A DC 19R6 GLATT n 3D 3D 2in1 P
229
222
250
254
222
222
222
222
222
222
222
A –
E
19unverbindliche Empfehlung | non-binding recommendation18
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
ST 012 PDG DC 81L3 GLATT n ABS HG P
ST 018 PDG DC 858Y GLATT n n n ABS HG P
ST 023 PDG DC 63U3 GLATT n ABS HG P
ST 025 PDG DC 004W GLATT n ABS HG P
ST 029 PDG DC 24U8 GLATT n ABS HG P
ST 030 PDG DC 37M1 GLATT n ABS HG P
ST 033 PDG DC 69L5 GLATT n ABS HG P
ST 035 PDG DC 18L5 GLATT n ABS HG P
ST 043 PDG DC 63U4 GLATT n ABS HG P
ST 057 PDG DC 67U0 GLATT n ABS HG P
ST 066 PDG DC 63U1 GLATT n ABS HG P
ST 078 PDG DC 62N6 GLATT n ABS HG P
ST 081 PDG DC 034H GLATT n ABS HG P
ST 099 PDG DC 63U2 GLATT n ABS HG P
ST 581 PDG DC 63U5 GLATT n ABS HG P
ST 838 PDG DC 63U6 GLATT n ABS HG P
ST 842 PDG DC 63U7 GLATT n ABS HG P
ST 850 PDG DC 24U9 GLATT n ABS HG P
Döllken-Kanten passend zu | Döllken Edgebands to match
Abet /PrintDöllken-Kanten passend zu | Döllken Edgebands to match
4ST
4STAbet/Print
1304 DC 7871 W-200 n ABS DC C 267
1309 DC 954M W-105 n n ABS DC C 271
1309 DC 954M W-200 n ABS DC C 271
1309 DC 954M W-87 n n n n ABS DC C 271
1318 DC 692Q W-200 n ABS DC C 264
1324 DC 8176 W-88 n ABS DC C 268
1328 DC 8176 W-88 n ABS DC C 268
1331 DC 337W W-105 n ABS DC C 256
1331 DC 337W W-86 n n n ABS DC C 256
1337 DC 8750 W-105 n ABS DC C 269
1337 DC 8750 W-87 n n n ABS DC C 269
1354 DC 364P W-86 n n ABS DC C 257
1362 DC 8176 W-88 n ABS DC C 268
1364 DC 8176 W-88 n ABS DC C 268
1365 DC 148J W-105 n n n n ABS DC C 252
1367 DC 138V W-200 n n n ABS DC C 252
1367 DC 138V P7145 n n n ABS DC C 252
1379 DC 8150 W-88 n ABS DC C 267
1609 DC 727L W-200 n n ABS DC C 266
1611 DC 6629 W-86 n n n ABS DC C 263
1611 DC 6629 P7145 n n n ABS DC C 263
1611 DC 6629 GLATT n n n ABS DC C 263
1612 DC 998V W-105 n ABS DC C 272
1614 DC 7855 W-105 n ABS DC C 267
1615 DC 584J W-200 n ABS DC C 261
1618 DC 102V W-86 n ABS DC C 251
1619 DC 8150 W-88 n ABS DC C 267
1621 DC 116V P7166 n n ABS DC C 252
1621 DC 116V W-200 n ABS DC C 252
1636 DC 8176 W-88 n ABS DC C 268
1639 DC 8176 W-88 n ABS DC C 268
1642 DC 040V W-86 n n ABS DC C 250
1643 DC 661L W-105 n ABS DC C 263
1661 DC 784J W-104 n ABS DC C 267
1661 DC 784J W-88 n ABS DC C 267
1664 DC 062J W-105 n ABS DC C 251
1666 DC 030J W-87 n n ABS DC C 250
1666 DC 030J W-86 n ABS DC C 250
1666 DC 030J W-200 n n n n ABS DC C 250
1684 DC 6635 W-88 n n ABS DC C 263
1685 DC 679K W-200 n ABS DC C 264
1685 DC 679K P7145 n n ABS DC C 264
231
231
230
228
229
229
231
228
230
231
230
230
228
230
230
230
230
229
A –
E
21
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation20 unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1688 DC 6629 W-86 n n n ABS DC C 263
1688 DC 6629 P7145 n n n ABS DC C 263
1688 DC 6629 GLATT n n n ABS DC C 263
1693 DC 359J W-88 n ABS DC C 257
1693 DC 359J W-87 n ABS DC C 257
1696 DC 959N W-87 n ABS DC C 271
1697 DC 728L W-200 n n ABS DC C 266
1699 DC 959N W-87 n ABS DC C 271
1804 DC 61R7 GLATT n 3D 3D 2in1 P 223
1804 SF 101A W-200 n n ABS UNI C 238
1813 SF 862C W-200 n n n n n ABS UNI C 246
1813 SF 862C W-87 n n n ABS UNI C 246
1813 SF 862C W-224 n n ABS UNI C 246
1819 SF 6241 W-101 n n ABS UNI C 244
1819 SF 6241 W-200 n n n ABS UNI C 244
1820 SF 100B W-200 n n ABS UNI C 238
312 DC 363V W-86 n n ABS DC C 257
312 DC 363V W-87 n ABS DC C 257
313 DC 185J W-87 n n ABS DC C 253
313 DC 185J W-88 n n n ABS DC C 253
314 DC 363V W-86 n n ABS DC C 257
314 DC 363V W-87 n ABS DC C 257
320 DC 246K W-200 n n ABS DC C 254
320 DC 246K W-87 n ABS DC C 254
321 DC 450V W-86 n n ABS DC C 259
324 DC 040V W-86 n n ABS DC C 250
343 DC 216J W-87 n n ABS DC C 254
351 DC 030J W-87 n n ABS DC C 250
351 DC 030J W-86 n ABS DC C 250
351 DC 030J W-200 n n n n ABS DC C 250
352 DC 021K W-88 n n ABS DC C 250
358 DC 904X W-105 n n ABS DC C 270
360 DC 021K W-88 n n ABS DC C 250
364 DC 517J W-87 n n ABS DC C 260
364 DC 517J W-200 n ABS DC C 260
365 DC 439M GLATT n n n ABS DC C 258
371 DC 281P GLATT n ABS DC C 255
372 DC 185L W-86 n n ABS DC C 253
373 DC 905X W-200 n n n ABS DC C 270
375 DC 062J W-105 n ABS DC C 251
382 DC 629N W-87 n ABS DC E 262
382 DC 629N W-105 n ABS DC C 262
382 DC 629N W-111 n n n ABS DC E 262
383 DC 083V P7166 n ABS DC C 251
384 DC 913P GLATT n ABS DC C 270
384 DC 913P W-86 n n n n ABS DC C 270
385 DC 8166 W-200 n n ABS DC C 268
386 DC 958X GLATT n n ABS DC C 271
386 DC 958X P7145 n n ABS DC C 271
387 DC 595N W-111 n ABS DC E 262
387 DC 595N W-200 n ABS DC E 262
406 SF 6346 W-200 n n n n n ABS UNI C 244
406 SF 6346 GLATT n n n n n ABS UNI C 244
406 SF 6346 W-101 n n n ABS UNI C 244
406 SF 6346 W-87 n n n ABS UNI C 244
406 SF 6346 W-105 n n n n ABS UNI C 244
406 SF 6346 W-102 n n n ABS UNI C 244
406 SF 6346 W-224 n n ABS UNI C 244
406 DC 555Y GLATT n ABS HG P 230
409 SF 6217 W-200 n ABS UNI C 244
410 SF 4693 W-87 n n ABS UNI C 242
410 SF 4693 W-101 n n n ABS UNI C 242
410 SF 4693 W-200 n n n n ABS UNI C 242
410 SF 4693 GLATT n n n n ABS UNI C 242
410 SF 4693 W-86 n n n n ABS UNI C 242
410 SF 4693 W-88 n n ABS UNI C 242
410 DC 19R8 GLATT n 3D 3D 2in1 P 222
410 DC 498V GLATT n n n ABS HG P 230
411 SF 6346 W-200 n n n n n ABS UNI C 244
411 SF 6346 GLATT n n n n n ABS UNI C 244
411 SF 6346 W-101 n n n ABS UNI C 244
411 SF 6346 W-87 n n n ABS UNI C 244
411 SF 6346 W-105 n n n n ABS UNI C 244
411 SF 6346 W-102 n n n ABS UNI C 244
411 SF 6346 W-224 n n ABS UNI C 244
412 SF 0707 W-200 n ABS UNI C 238
412 SF 0707 W-86 n n n ABS UNI C 238
413 DC 32R0 GLATT n 3D 3D 2in1 P 223
413 SF 0549 W-200 n n n n ABS UNI C 237
414 SF 6208 W-200 n n n n ABS UNI C 244
414 SF 6208 W-86 n n n n ABS UNI C 244
414 DC 286H GLATT n ABS HG P 229
415 DC 31R3 GLATT n 3D 3D 2in1 P 222
416 SF 5991 W-200 n ABS UNI C 244
Abet/Print
A –
E
23unverbindliche Empfehlung | non-binding recommendation22
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
418 SF 0650 W-200 n ABS UNI C 238
421 SF 0110 W-101 n n ABS UNI C 236
421 SF 0110 W-102 n ABS UNI C 236
421 SF 0110 W-86 n ABS UNI C 236
421 SF 0110 W-200 n n n n n ABS UNI C 236
421 SF 0110 GLATT n n n ABS UNI C 236
421 SF 0110 W-105 n n n ABS UNI C 236
421 DC 19R6 GLATT n 3D 3D 2in1 P 222
421 DC 319V GLATT n n n ABS HG P 229
427 DC 951Y GLATT n ABS HG P 232
428 SF 5847 W-200 n n n ABS UNI C 243
430 SF 482B P7166 n ABS UNI C 242
431 DC 570V GLATT n ABS HG P 230
431 SF 1067 W-200 n n n ABS UNI C 238
435 SF 404C W-200 n n ABS UNI C 241
435 SF 404C W-87 n n ABS UNI C 241
435 DC 24R2 GLATT n 3D 3D 2in1 P 222
435 DC 105W GLATT n ABS HG P 228
437 SF 436E W-86 n ABS UNI C 242
446 DC 35R3 GLATT n 3D 3D 2in1 P 223
450 SF 0597 W-200 n n ABS UNI C 237
451 SF 494A W-200 n ABS UNI C 242
453 SF 617A W-200 n ABS UNI C 244
455 SF 0597 W-200 n n ABS UNI C 237
464 SF 234A W-200 n ABS UNI C 240
466 SF 1167 W-200 n ABS UNI C 239
468 SF 0717 W-200 n ABS UNI C 238
472 DC 35R1 GLATT n 3D 3D 2in1 P 223
472 SF 1082 W-200 n n ABS UNI C 238
475 SF 3311 W-200 n n n ABS UNI C 241
475 SF 3311 W-87 n n n n ABS UNI C 241
478 SF 0805 W-200 n ABS UNI C 238
624 DC 692Q W-200 n ABS DC C 264
626 DC 16J7 W-105 n n ABS DC C 253
626 DC 16J7 W-86 n n n ABS DC C 253
626 DC 16J7 W-87 n n ABS DC C 253
627 DC 822W W-86 n n n ABS DC C 268
631 DC 042U W-86 n n n ABS DC C 250
633 DC 27K7 W-111 n ABS DC E 255
636 DC 246K W-200 n n ABS DC C 254
636 DC 246K W-87 n ABS DC C 254
650 DC 099V W-105 n ABS DC C 251
650 DC 099V W-86 n n n ABS DC C 251
653 DC 36L4 W-87 n n n n ABS DC C 257
656 DC 12L0 W-79 n ABS DC E 252
656 DC 12L0 W-86 n ABS DC C 252
656 DC 12L0 W-86 n ABS DC E 252
656 DC 12L0 W-86 n n ABS DC E 252
658 DC 067U W-200 n n ABS DC C 251
662 DC 361H W-106 n ABS DC C 257
662 DC 361H GLATT n n n ABS DC C 257
685 DC 8176 W-88 n ABS DC C 268
801 SF 119A W-200 n ABS UNI C 239
810 SF 862C W-200 n n n n n ABS UNI C 246
810 SF 862C W-87 n n n ABS UNI C 246
810 SF 862C W-224 n n ABS UNI C 246
810 DC 32R1 GLATT n 3D 3D 2in1 P 223
810 DC 325X GLATT n n ABS HG P 229
813 DC 719H GLATT n ABS HG P 231
813 SF 6414 W-200 n n n ABS UNI C 245
823 DC 570V GLATT n ABS HG P 230
823 SF 447C W-200 n n ABS UNI C 242
835 SF 454C W-200 n ABS UNI C 242
836 SF 583D W-200 n n ABS UNI C 243
836 DC 105W GLATT n ABS HG P 228
838 SF 130D W-87 n n n ABS UNI C 239
845 SF 386A W-200 n n ABS UNI C 241
849 SF 5847 W-200 n n n ABS UNI C 243
852 SF 743B W-87 n n n ABS UNI C 245
853 SF 680A W-200 n n n ABS UNI C 245
854 SF 1072 W-200 n n ABS UNI C 238
859 SF 0193 W-200 n n n ABS UNI C 237
860 DC 35R4 GLATT n 3D 3D 2in1 P 223
861 SF 261D W-200 n n ABS UNI C 240
861 DC 848U GLATT n ABS HG P 231
862 SF 511A W-200 n n ABS UNI C 243
869 SF 922B W-200 n n ABS UNI C 246
870 SF 0184 W-200 n ABS UNI C 236
871 SF 0179 W-200 n n n ABS UNI C 236
871 SF 0179 W-87 n n n n ABS UNI C 236
877 DC 700R GLATT n n n 3D 3D P 223
879 DC 950Y GLATT n ABS HG P 232
879 SF 0711 W-200 n n n ABS UNI C 238
880 DC 18P8 GLATT n n ABS ALU-Folie P 228
Abet/Print
A –
E
24 25unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
202 DC 954M W-105 n n ABS DC C
202 DC 954M W-200 n ABS DC C
202 DC 954M W-87 n n n n ABS DC C
204 DC 7871 W-200 n ABS DC C
207 DC 708N W-200 n ABS DC C
207 DC 708N W-87 n n n n ABS DC C
211 DC 727L W-200 n n ABS DC C
230 SF 5151 W-200 n n ABS UNI C
230 SF 5151 GLATT n n n ABS UNI C
230 SF 5151 W-87 n n n ABS UNI C
231 SF 4693 W-87 n n ABS UNI C
231 SF 4693 W-101 n n n ABS UNI C
231 SF 4693 W-200 n n n n ABS UNI C
231 SF 4693 GLATT n n n n ABS UNI C
231 SF 4693 W-86 n n n n ABS UNI C
231 SF 4693 W-88 n n ABS UNI C
237 DC 7855 W-105 n ABS DC C
241 DC 148J W-105 n n n n ABS DC C
249 DC 185J W-87 n n ABS DC C
249 DC 185J W-88 n n n ABS DC C
257 DC 435K GLATT n ABS DC E
280 DC 116V P7166 n n ABS DC C
280 DC 116V W-200 n ABS DC C
298 DC 8176 W-88 n ABS DC C
310 SF 0110 W-101 n n ABS UNI C
310 SF 0110 W-102 n ABS UNI C
310 SF 0110 W-86 n ABS UNI C
310 SF 0110 W-200 n n n n n ABS UNI C
310 SF 0110 GLATT n n n ABS UNI C
310 SF 0110 W-105 n n n ABS UNI C
320 SF 482B P7166 n ABS UNI C
330 SF 1138 W-200 n n n ABS UNI C
340 SF 5395 W-87 n n ABS UNI C
340 SF 5395 W-200 n n n n n ABS UNI C
352 SF 1086 W-87 n n ABS UNI C
352 SF 1086 W-200 n n n ABS UNI C
356 SF 0707 W-200 n ABS UNI C
356 SF 0707 W-86 n n n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
AGTPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
894 SF 336C W-200 n n n ABS UNI C 241
897 SF 6267 W-200 n ABS UNI C 244
897 SF 6267 W-86 n n n ABS UNI C 244
897 DC 24R4 GLATT n 3D 3D 2in1 P 222
897 DC 949Y GLATT n ABS HG P 232
898 SF 6082 W-200 n n ABS UNI C 244
9230 DC 388U W-200 n ABS DC C 257
9230 DC 388U W-87 n n n n ABS DC C 257
9802 DC 926J W-200 n ABS DC C 270
9803 DC 554K W-200 n ABS DC C 261
9813 DC 708N W-200 n ABS DC C 265
9813 DC 708N W-87 n n n n ABS DC C 265
9834 DC 138V W-200 n n n ABS DC C 252
9834 DC 138V P7145 n n n ABS DC C 252
271
271
271
267
265
265
266
243
243
243
242
242
242
242
242
242
267
252
253
253
258
252
252
268
236
236
236
236
236
236
242
239
243
243
239
239
238
238
Abet/PrintAGT
A –
E
27unverbindliche Empfehlung | non-binding recommendation26
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Alvic
Döllken-Kanten passend zu | Döllken Edgebands to match
AlvicPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
Anthracite DC 1R36 GLATT n 3D 3D 2in1 P
Anthracite DC 31L5 GLATT n n ABS HG P
Anthracite DC 71V3 GLATT n ABS DC E
Anthracite Pearl DC 71R0 GLATT n 3D 3D 2in1 P
Anthracite Pearl DC 06U4 GLATT n ABS HG P
Anthracite supermat DC 62L8 GLATT n ABS UNI/L E
Black DC 19R6 GLATT n 3D 3D 2in1 P
Black DC 319V GLATT n n n ABS HG P
Black Laser DC 19R6 GLATT n 3D 3D 2in1 P
Black Laser DC 67V2 GLATT n ABS HG P
Black Pearl DC 0R32 GLATT n 3D 3D 2in1 P
Black Pearl DC 06U9 GLATT n ABS HG P
Bordeaux DC 71R2 GLATT n 3D 3D 2in1 P
Bordeaux DC 354Y GLATT n ABS HG P
Bronze Stone DC 74R5 GLATT n 3D 3D 2in1 P
Bronze Stone DC 19V9 GLATT n ABS HG P
Cashmere DC 32R0 GLATT n 3D 3D 2in1 P
Cashmere DC 69L5 GLATT n ABS HG P
Cashmere DC 71V2 GLATT n ABS DC E
Cashmere supermatt DC 67V6 GLATT n ABS UNI/L E
Champagne Laser DC 78R0 GLATT n 3D 3D 2in1 P
Champagne Laser DC 62V4 GLATT n ABS HG P
Copper Stone DC 74R6 GLATT n 3D 3D 2in1 P
Copper Stone DC 20V0 GLATT n ABS HG P
Cream DC 23R5 GLATT n 3D 3D 2in1 P
Cream DC 325X GLATT n n ABS HG P
Cream Pearl DC 0R31 GLATT n 3D 3D 2in1 P
Cream Pearl DC 62V0 GLATT n ABS HG P
Cream supermatt DC 62L2 GLATT n ABS DC E
Dark Elm DC 38R8 GLATT n 3D 3D 2in1 P
Dark Elm DC 62V3 GLATT n ABS HG P
Frape Oak DC 38R7 GLATT n 3D 3D 2in1 P
Frape Oak DC 62V2 GLATT n ABS HG P
G025 DC 71R0 GLATT n 3D 3D 2in1 P
G025 DC 06U4 GLATT n ABS HG P
G025 DC 0R22 GLATT n ABS HG P
G026 DC 0R28 GLATT n 3D 3D 2in1 P
G026 DC 06U5 GLATT n ABS HG P
G026 DC 0R23 GLATT n ABS HG P
G027 DC 0R29 GLATT n 3D 3D 2in1 P
G027 DC 06U6 GLATT n ABS HG P
G027 DC 0R24 GLATT n ABS HG P
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
G028 DC 0R30 GLATT n 3D 3D 2in1 P
G028 DC 06U7 GLATT n ABS HG P
G028 DC 0R25 GLATT n ABS HG P
G029 DC 0R31 GLATT n 3D 3D 2in1 P
G029 DC 06U8 GLATT n ABS HG P
G029 DC 0R26 GLATT n ABS HG P
G030 DC 0R32 GLATT n 3D 3D 2in1 P
G030 DC 06U9 GLATT n ABS HG P
G030 DC 0R27 GLATT n ABS HG P
Lava DC 93R4 GLATT n 3D 3D 2in1 P
Lava DC 62V1 GLATT n ABS HG P
Makassar DC 38R8 GLATT n 3D 3D 2in1 P
Makassar DC 47K2 GLATT n ABS HG P
Melange 1 - Cream DC 1R44 GLATT n 3D 3D 2in1 P
Melange 1 - Cream DC 66V7 GLATT n ABS HG P
Melange 4 - Slate DC 98R9 GLATT n 3D 3D 2in1 P
Melange 4 - Slate DC 47Q9 GLATT n ABS HG P
Olive Wood DC 50R7 GLATT n 3D 3D 2in1 P
Olive Wood DC 02K7 GLATT n ABS HG P
Pistachio DC 23R6 GLATT n 3D 3D 2in1 P
Pistachio DC 72N1 GLATT n ABS HG P
Red DC 35R0 GLATT n 3D 3D 2in1 P
Red DC 439W GLATT n ABS HG P
Stone Grey DC 78R0 GLATT n 3D 3D 2in1 P
Stone Grey DC 82N8 GLATT n ABS HG P
Stone Grey DC 71V1 GLATT n ABS DC E
Stone Grey Pearl DC 0R29 GLATT n 3D 3D 2in1 P
Stone Grey Pearl DC 06U6 GLATT n ABS HG P
Violet DC 24R1 GLATT n 3D 3D 2in1 P
Violet DC 952Y GLATT n ABS HG P
White DC 19R8 GLATT n 3D 3D 2in1 P
White DC 18J4 GLATT n ABS HG P
White Laser DC 32R0 GLATT n 3D 3D 2in1 P
White Laser DC 67V1 GLATT n ABS HG P
222
229
266
223
228
236
222
229
222
231
222
228
223
229
224
228
223
231
266
236
224
230
224
229
222
229
222
230
262
223
230
223
230
223
228
228
222
228
228
222
228
228
222
228
228
222
228
228
222
228
228
224
230
223
229
222
231
224
229
223
228
222
231
223
229
224
231
266
222
228
222
232
222
228
223
231
A –
E
28 29unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Annovati – Trombini
Döllken-Kanten passend zu | Döllken Edgebands to match
Annovati – TrombiniPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1681 DC 33J0 W-200 n ABS DC C
1714 DC 580M W-87 n n ABS DC C
1715 DC 608Y W-224 n n n ABS DC C
1726 DC 535N W-200 n n ABS DC C
1799 DC 138V W-200 n n n ABS DC C
1799 DC 138V P7145 n n n ABS DC C
1808 DC 584J W-200 n ABS DC C
1829 DC 021K W-88 n n ABS DC C
2378 DC 845Q W-200 n n n ABS DC C
2383 DC 316N W-200 n ABS DC C
2383 DC 316N W-87 n n ABS DC C
2519 DC 646N P7166 n ABS DC C
2519 DC 646N P7145 n n n ABS DC C
2541 DC 8166 W-200 n n ABS DC C
270 DC 887Y GLATT n ABS DC C
2702 DC 926J W-200 n ABS DC C
2703 DC 926J W-200 n ABS DC C
2822 DC 728L W-200 n n ABS DC C
3037 DC 021K W-88 n n ABS DC C
3389 DC 204J W-105 n ABS DC C
3389 DC 204J W-224 n n n n ABS DC C
341 SF 0110 W-101 n n ABS UNI C
341 SF 0110 W-102 n ABS UNI C
341 SF 0110 W-86 n ABS UNI C
341 SF 0110 W-200 n n n n n ABS UNI C
341 SF 0110 GLATT n n n ABS UNI C
341 SF 0110 W-105 n n n ABS UNI C
3705 DC 396H W-200 n ABS DC E
3706 DC 6835 W-200 n n ABS DC E
3708 DC 502L GLATT n n n ABS DC E
3737 DC 655L GLATT n ABS DC C
3739 DC 315K W-200 n ABS DC C
380 SF 0547 W-200 n n n ABS UNI C
3813 DC 488Y W-105 n ABS DC C
3813 DC 488Y W-87 n ABS DC C
3974 DC 927H W-200 n n ABS DC C
3977 DC 27K7 W-111 n ABS DC E
414 SF 061C W-200 n ABS UNI C
4153 DC 381N W-105 n n ABS DC C
417 SF 6445 W-200 n n ABS UNI C
419 SF 5992 W-200 n n n n n ABS UNI C
419 SF 5992 W-224 n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
421 SF 6108 W-200 n n ABS UNI C
4266 DC 083V P7166 n ABS DC C
4330 DC 957N W-200 n ABS DC C
4352 DC 385L W-200 n ABS DC C
4352 DC 385L W-86 n n n n ABS DC C
438 SF 862C W-200 n n n n n ABS UNI C
438 SF 862C W-87 n n n ABS UNI C
438 SF 862C W-224 n n ABS UNI C
4399 DC 957N W-200 n ABS DC C
4447 DC 162J W-200 n n ABS DC E
4466 DC 8647 W-200 n n n n ABS DC C
4466 DC 8647 W-87 n n n ABS DC C
4561 DC 410K W-105 n n n n ABS DC C
466 SF 4693 W-87 n n ABS UNI C
466 SF 4693 W-101 n n n ABS UNI C
466 SF 4693 W-200 n n n n ABS UNI C
466 SF 4693 GLATT n n n n ABS UNI C
466 SF 4693 W-86 n n n n ABS UNI C
466 SF 4693 W-88 n n ABS UNI C
4666 DC 14L3 SL111 n ABS DC E
4666 DC 14L3 W-111 n n n ABS DC E
4667 DC 099V W-105 n ABS DC C
4667 DC 099V W-86 n n n ABS DC C
4670 DC 8631 W-88 n n n n ABS DC C
478 SF 234A W-200 n ABS UNI C
485 SF 0549 W-200 n n n n ABS UNI C
4857 DC 596J W-200 n n ABS DC C
488 SF 261D W-200 n n ABS UNI C
4891 DC 857J GLATT n ABS DC C
491 SF 482B P7166 n ABS UNI C
4965 DC 679K W-200 n ABS DC C
4965 DC 679K P7145 n n ABS DC C
4969 DC 396N W-86 n ABS DC C
497 SF 0497 W-200 n n ABS UNI C
523 SF 5971 W-200 n n n n ABS UNI C
523 SF 5971 W-224 n n ABS UNI C
524 SF 017A W-200 n n ABS UNI C
535 SF 0805 W-200 n ABS UNI C
557 SF 5854 GLATT n ABS UNI C
557 SF 5854 W-87 n n ABS UNI C
557 SF 5854 W-200 n n n ABS UNI C
593 SF 386A W-200 n n ABS UNI C
256
261
262
261
252
252
261
250
268
256
256
262
262
268
269
270
270
266
250
254
254
236
236
236
236
236
236
257
264
260
262
256
237
260
260
271
255
238
257
245
244
244
244
251
271
257
257
246
246
246
271
252
269
269
258
242
242
242
242
242
242
252
252
251
251
268
240
237
262
240
268
242
264
264
258
237
244
244
236
238
243
243
243
241
A –
E
30 31unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Annovati – TrombiniArgolite
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
597 SF 6287 W-200 n ABS UNI C
601 SF 864A W-87 n n n ABS UNI C
608 SF 0595 W-200 n n ABS UNI C
609 SF 680A W-200 n n n ABS UNI C
610 SF 1330 W-200 n n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
13 DC 355Q GLATT n n ABS DC C
20 DC 062J W-105 n ABS DC C
212 SF 5949 W-200 n ABS UNI C
214 SF 303E W-87 n n ABS UNI C
214 SF 303E W-224 n n ABS UNI C
216 SF 561D W-200 n n n ABS UNI C
217 SF 5151 W-200 n n ABS UNI C
217 SF 5151 GLATT n n n ABS UNI C
217 SF 5151 W-87 n n n ABS UNI C
218 SF 0110 W-101 n n ABS UNI C
218 SF 0110 W-102 n ABS UNI C
218 SF 0110 W-86 n ABS UNI C
218 SF 0110 W-200 n n n n n ABS UNI C
218 SF 0110 GLATT n n n ABS UNI C
218 SF 0110 W-105 n n n ABS UNI C
22 DC 554K W-200 n ABS DC C
220 SF 6119 W-200 n n ABS UNI C
221 SF 0547 W-200 n n n ABS UNI C
240 SF 743B W-87 n n n ABS UNI C
241 SF 101A W-200 n n ABS UNI C
243 SF 130D W-87 n n n ABS UNI C
246 SF 3311 W-200 n n n ABS UNI C
246 SF 3311 W-87 n n n n ABS UNI C
247 SF 119A W-200 n ABS UNI C
25 DC 19L8 W-224 n n n ABS DC C
251 SF 436E W-86 n ABS UNI C
252 SF 0180 W-200 n ABS UNI C
254 SF 386A W-200 n n ABS UNI C
255 SF 0597 W-200 n n ABS UNI C
263 SF 583D W-200 n n ABS UNI C
271 SF 288B W-200 n n ABS UNI C
272 SF 158A W-200 n ABS UNI C
273 SF 2109 W-200 n ABS UNI C
276 SF 4861 W-101 n n n ABS UNI C
276 SF 4861 W-200 n n n ABS UNI C
281 SF 1330 W-200 n n n ABS UNI C
282 SF 6287 W-200 n ABS UNI C
290 SF 1067 W-200 n n n ABS UNI C
292 SF 0222 W-200 n ABS UNI C
296 SF 066D W-200 n ABS UNI C
298 SF 6267 W-200 n ABS UNI C
298 SF 6267 W-86 n n n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
Argolite
244
246
237
245
239
257
251
243
241
241
243
243
243
243
236
236
236
236
236
236
261
244
237
245
238
239
241
241
239
253
242
236
241
237
243
241
240
240
242
242
239
244
238
237
238
244
244
A –
E
32 33unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Argolite
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
30 DC 494J W-105 n ABS DC C
301 SF 6346 W-200 n n n n n ABS UNI C
301 SF 6346 GLATT n n n n n ABS UNI C
301 SF 6346 W-101 n n n ABS UNI C
301 SF 6346 W-87 n n n ABS UNI C
301 SF 6346 W-105 n n n n ABS UNI C
301 SF 6346 W-102 n n n ABS UNI C
301 SF 6346 W-224 n n ABS UNI C
302 SF 862C W-200 n n n n n ABS UNI C
302 SF 862C W-87 n n n ABS UNI C
302 SF 862C W-224 n n ABS UNI C
303 SF 540E W-200 n n ABS UNI C
304 SF 6008 W-200 n n ABS UNI C
305 SF 5991 W-200 n ABS UNI C
306 SF 4693 W-87 n n ABS UNI C
306 SF 4693 W-101 n n n ABS UNI C
306 SF 4693 W-200 n n n n ABS UNI C
306 SF 4693 GLATT n n n n ABS UNI C
306 SF 4693 W-86 n n n n ABS UNI C
306 SF 4693 W-88 n n ABS UNI C
31 DC 857J GLATT n ABS DC C
312 SF 6008 W-200 n n ABS UNI C
322 SF 979C W-200 n ABS UNI C
324 SF 735A W-200 n n n ABS UNI C
324 SF 735A W-87 n n n ABS UNI C
330 SF 1083 W-200 n n ABS UNI C
35 DC 661L W-105 n ABS DC C
352 SF 6241 W-101 n n ABS UNI C
352 SF 6241 W-200 n n n ABS UNI C
353 SF 4861 W-101 n n n ABS UNI C
353 SF 4861 W-200 n n n ABS UNI C
360 SF 6214 W-200 n n ABS UNI C
361 SF 178A W-200 n ABS UNI C
362 SF 261D W-200 n n ABS UNI C
363 SF 447C W-200 n n ABS UNI C
364 SF 1086 W-87 n n ABS UNI C
364 SF 1086 W-200 n n n ABS UNI C
366 SF 680A W-200 n n n ABS UNI C
367 SF 5847 W-200 n n n ABS UNI C
369 SF 169C W-87 n n ABS UNI C
369 SF 169C W-200 n n n ABS UNI C
371 SF 201E W-87 n n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
372 SF 2109 W-200 n ABS UNI C
373 SF 1067 W-200 n n n ABS UNI C
38 DC 7239 W-104 n n ABS DC C
40 DC 535N W-200 n n ABS DC C
44 DC 064J W-200 n ABS DC C
55 DC 8647 W-200 n n n n ABS DC C
55 DC 8647 W-87 n n n ABS DC C
58 DC 440U W-87 n ABS DC C
65 DC 6762 W-200 n n ABS DC C
73 DC 04L4 W-111 n n n ABS DC E
74 DC 103V W-86 n ABS DC C
74 DC 103V W-88 n n n ABS DC C
75 DC 995U W-88 n ABS DC C
79 AM DC 396N W-86 n ABS DC C
80 DC 179K W-105 n n n ABS DC C
81 DC 06M7 W-88 n ABS DC C
82 DC 552L W-105 n ABS DC C
84 DC 316N W-200 n ABS DC C
84 DC 316N W-87 n n ABS DC C
85 DC 596J W-200 n n ABS DC C
86 DC 283P GLATT n n ABS DC C
88 DC 185L W-86 n n ABS DC C
89 DC 6968 W-105 n n ABS DC C
89 DC 6968 W-87 n ABS DC C
89 DC 6968 W-86 n n ABS DC C
93 DC 878H W-200 n n ABS DC C
97 DC 584J W-200 n ABS DC C
98 DC 04L5 W-86 n ABS DC C
260
244
244
244
244
244
244
244
246
246
246
243
244
244
242
242
242
242
242
242
268
244
246
245
245
238
263
244
244
242
242
244
240
240
242
239
239
245
243
240
240
240
240
238
266
261
251
269
269
258
263
250
251
251
272
258
253
251
261
256
256
262
255
253
264
264
264
269
261
250
A –
E
35unverbindliche Empfehlung | non-binding recommendation34
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
Arpa
Arpa
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0001 DC 19R8 GLATT n 3D 3D 2in1 P
0001 SF 6346 W-200 n n n n n ABS UNI C
0001 SF 6346 GLATT n n n n n ABS UNI C
0001 SF 6346 W-101 n n n ABS UNI C
0001 SF 6346 W-87 n n n ABS UNI C
0001 SF 6346 W-105 n n n n ABS UNI C
0001 SF 6346 W-102 n n n ABS UNI C
0001 SF 6346 W-224 n n ABS UNI C
0004 SF 6346 W-200 n n n n n ABS UNI C
0004 SF 6346 GLATT n n n n n ABS UNI C
0004 SF 6346 W-101 n n n ABS UNI C
0004 SF 6346 W-87 n n n ABS UNI C
0004 SF 6346 W-105 n n n n ABS UNI C
0004 SF 6346 W-102 n n n ABS UNI C
0004 SF 6346 W-224 n n ABS UNI C
0010 SF 6346 W-200 n n n n n ABS UNI C
0010 SF 6346 GLATT n n n n n ABS UNI C
0010 SF 6346 W-101 n n n ABS UNI C
0010 SF 6346 W-87 n n n ABS UNI C
0010 SF 6346 W-105 n n n n ABS UNI C
0010 SF 6346 W-102 n n n ABS UNI C
0010 SF 6346 W-224 n n ABS UNI C
0011 SF 6346 W-200 n n n n n ABS UNI C
0011 SF 6346 GLATT n n n n n ABS UNI C
0011 SF 6346 W-101 n n n ABS UNI C
0011 SF 6346 W-87 n n n ABS UNI C
0011 SF 6346 W-105 n n n n ABS UNI C
0011 SF 6346 W-102 n n n ABS UNI C
0011 SF 6346 W-224 n n ABS UNI C
0020 SF 6346 W-200 n n n n n ABS UNI C
0020 SF 6346 GLATT n n n n n ABS UNI C
0020 SF 6346 W-101 n n n ABS UNI C
0020 SF 6346 W-87 n n n ABS UNI C
0020 SF 6346 W-105 n n n n ABS UNI C
0020 SF 6346 W-102 n n n ABS UNI C
0020 SF 6346 W-224 n n ABS UNI C
0028 DC 498V GLATT n n n ABS HG P
0029 Fenix DC 49U3 GLATT n ABS UNI/L C
0030 Fenix DC 94M2 GLATT n ABS UNI/L C
0200 SF 735A W-200 n n n ABS UNI C
0200 SF 735A W-87 n n n ABS UNI C
0201 SF 6107 W-200 n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0202 SF 5991 W-200 n ABS UNI C
0203 SF 666A W-200 n n ABS UNI C
0204 DC 24R8 GLATT n 3D 3D 2in1 P
0210 SF 2109 W-200 n ABS UNI C
0211 SF 4861 W-101 n n n ABS UNI C
0211 SF 4861 W-200 n n n ABS UNI C
0215 SF 309E W-200 n n n ABS UNI C
0218 SF 561D W-200 n n n ABS UNI C
0225 SF 6108 W-200 n n ABS UNI C
0227 SF 6107 W-200 n ABS UNI C
0232 SF 6211 W-200 n n ABS UNI C
0232 SF 6211 W-87 n n n ABS UNI C
0234 SF 315E W-200 n n ABS UNI C
0237 SF 1085 W-200 n n n ABS UNI C
0244 SF 5854 GLATT n ABS UNI C
0244 SF 5854 W-87 n n ABS UNI C
0244 SF 5854 W-200 n n n ABS UNI C
0249 SF 091E W-86 n n n ABS UNI C
0254 SF 0549 W-200 n n n n ABS UNI C
0256 SF 0707 W-200 n ABS UNI C
0256 SF 0707 W-86 n n n ABS UNI C
0264 SF 659B W-87 n ABS UNI C
0264 SF 659B W-86 n n n ABS UNI C
0266 SF 6217 W-200 n ABS UNI C
0507 SF 743B W-87 n n n ABS UNI C
0509 SF 0110 W-101 n n ABS UNI C
0509 SF 0110 W-102 n ABS UNI C
0509 SF 0110 W-86 n ABS UNI C
0509 SF 0110 W-200 n n n n n ABS UNI C
0509 SF 0110 GLATT n n n ABS UNI C
0509 SF 0110 W-105 n n n ABS UNI C
0510 SF 579D W-87 n n n ABS UNI C
0517 SF 617A W-200 n ABS UNI C
0523 SF 0188 W-200 n ABS UNI C
0526 SF 4678 W-200 n n ABS UNI C
0527 SF 1330 W-200 n n n ABS UNI C
0538 SF 1086 W-87 n n ABS UNI C
0538 SF 1086 W-200 n n n ABS UNI C
0549 SF 386A W-200 n n ABS UNI C
0553 SF 6267 W-200 n ABS UNI C
0553 SF 6267 W-86 n n n ABS UNI C
0561 SF 447C W-200 n n ABS UNI C
222
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
230
236
236
245
245
244
244
245
222
240
242
242
241
243
244
244
244
244
241
238
243
243
243
238
237
238
238
245
245
244
245
236
236
236
236
236
236
243
244
236
242
239
239
239
241
244
244
242
A –
E
36 37unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Arpa
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0564 SF 0717 W-200 n ABS UNI C
0565 SF 158A W-200 n ABS UNI C
0566 SF 130D W-87 n n n ABS UNI C
0570 SF 386A W-200 n n ABS UNI C
0571 SF 404C W-200 n n ABS UNI C
0571 SF 404C W-87 n n ABS UNI C
0573 SF 0189 W-200 n ABS UNI C
0593 SF 0436 W-200 n n ABS UNI C
0595 SF 0179 W-200 n n n ABS UNI C
0595 SF 0179 W-87 n n n n ABS UNI C
0607 SF 119A W-200 n ABS UNI C
0616 SF 922B W-200 n n ABS UNI C
0619 SF 482B P7166 n ABS UNI C
0623 SF 0711 W-200 n n n ABS UNI C
0636 SF 0597 W-200 n n ABS UNI C
0647 SF 556B W-87 n n n ABS UNI C
0648 SF 756A W-200 n ABS UNI C
0651 SF 5026 W-200 n ABS UNI C
0660 SF 40A1 W-87 n n n ABS UNI C
0661 SF 169C W-87 n n ABS UNI C
0661 SF 169C W-200 n n n ABS UNI C
0664 SF 39A1 W-87 n ABS UNI C
0666 SF 303E W-87 n n ABS UNI C
0666 SF 303E W-224 n n ABS UNI C
0670 SF 995E W-87 n ABS UNI C
0677 SF 0707 W-200 n ABS UNI C
0677 SF 0707 W-86 n n n ABS UNI C
0682 SF 261D W-200 n n ABS UNI C
0689 SF 583D W-200 n n ABS UNI C
0693 DC 25R1 GLATT n 3D 3D 2in1 P
0698 SF 1067 W-200 n n n ABS UNI C
0699 SF 578D W-87 n n n ABS UNI C
0701 SF 203E W-87 n ABS UNI C
0701 SF 203E W-200 n ABS UNI C
0703 SF 979C W-200 n ABS UNI C
0709 SF 525E W-200 n n ABS UNI C
0716 Fenix DC 50U0 GLATT n ABS UNI/L C
0717 Fenix DC 57U0 GLATT n ABS UNI/L C
0719 Fenix DC 49U9 GLATT n ABS UNI/L C
0720 Fenix DC 65U3 GLATT n ABS UNI/L C
0721 Fenix DC 50U3 GLATT n ABS UNI/L C
1205 DC 727L W-200 n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1258 DC 6635 W-88 n n ABS DC C
1281 DC 926J W-200 n ABS DC C
1286 DC 440U W-87 n ABS DC C
1313 DC 784J W-104 n ABS DC C
1313 DC 784J W-88 n ABS DC C
1372 DC 037J W-88 n ABS DC C
1372 DC 037J GLATT n ABS DC C
1863 DC 8176 W-88 n ABS DC C
1870 DC 954M W-105 n n ABS DC C
1870 DC 954M W-200 n ABS DC C
1870 DC 954M W-87 n n n n ABS DC C
1877 DC 494J W-105 n ABS DC C
1886 DC 535N W-200 n n ABS DC C
1890 DC 535N W-200 n n ABS DC C
1930 DC 8437 W-200 n n n ABS DC C
1955 DC 06M7 W-88 n ABS DC C
1971 DC 694L W-200 n ABS DC C
1993 DC 18L6 W-87 n n n n ABS DC C
1994 DC 040V W-86 n n ABS DC C
2550 DC 6835 W-200 n n ABS DC E
2578 DC 242U W-200 n ABS DC E
2606 DC 879L W-200 n n ABS DC E
2608 DC 502L GLATT n n n ABS DC E
2620 DC 69M9 W-87 n ABS DC C
2628 Fenix DC 80U1 GLATT n ABS DC C
2629 Fenix DC 56U6 GLATT n ABS DC C
2630 Fenix DC 58U2 GLATT n ABS DC C
3283 DC 797K W-200 n n ABS DC E
3283 DC 797K W-86 n ABS DC E
3296 DC 94L3 W-87 n n n ABS DC C
3319 DC 04L4 W-111 n n n ABS DC E
3372 Fenix DC 90U6 GLATT n ABS DC E
4052 DC 356Q GLATT n ABS DC C
4071 DC 7239 W-104 n n ABS DC C
4128 DC 060J W-105 n n n ABS DC C
4145 DC 703Q W-86 n ABS DC C
4145 DC 703Q W-200 n ABS DC C
4145 DC 703Q W-87 n n n ABS DC C
4145 DC 703Q W-88 n n n ABS DC C
4176 DC 596J W-200 n n ABS DC C
4177 DC 8978 W-88 n ABS DC C
4177 DC 8978 W-87 n ABS DC C
238
240
239
241
241
241
237
237
236
236
239
246
242
238
237
243
245
243
241
240
240
241
241
241
246
238
238
240
243
222
238
243
240
240
246
243
236
236
236
236
236
266
263
270
258
267
267
250
250
268
271
271
271
260
261
261
268
251
264
253
250
264
254
269
260
264
267
261
262
267
267
271
250
270
257
266
250
265
265
265
265
262
270
270
A –
E
38 39unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Arpa
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
4178 DC 845Q W-200 n n n ABS DC C
4247 DC 959N W-87 n ABS DC C
4260 DC 10K0 W-105 n n ABS DC C
4279 DC 517J W-87 n n ABS DC C
4279 DC 517J W-200 n ABS DC C
4303 DC 656W W-86 n n n n ABS DC C
4325 DC 569P W-87 n n ABS DC C
4325 DC 569P W-200 n ABS DC C
4327 DC 385L W-200 n ABS DC C
4327 DC 385L W-86 n n n n ABS DC C
4344 DC 6635 W-88 n n ABS DC C
4345 DC 083V P7166 n ABS DC C
4350 DC 694L W-200 n ABS DC C
4367 DC 14L3 SL111 n ABS DC E
4367 DC 14L3 W-111 n n n ABS DC E
4384 DC 692Q W-200 n ABS DC C
4385 DC 728L W-200 n n ABS DC C
4390 DC 364P W-86 n n ABS DC C
4416 DC 67N1 W-111 n ABS DC E
4418 DC 945L W-200 n ABS DC C
4419 DC 958X GLATT n n ABS DC C
4419 DC 958X P7145 n n ABS DC C
4420 DC 958X GLATT n n ABS DC C
4420 DC 958X P7145 n n ABS DC C
4442 DC 363V W-86 n n ABS DC C
4442 DC 363V W-87 n ABS DC C
4445 DC 27K7 W-111 n ABS DC E
4452 DC 14L3 SL111 n ABS DC E
4452 DC 14L3 W-111 n n n ABS DC E
4456 DC 12L0 W-79 n ABS DC E
4456 DC 12L0 W-86 n ABS DC C
4456 DC 12L0 W-86 n ABS DC E
4456 DC 12L0 W-86 n n ABS DC E
4471 DC 822W W-86 n n n ABS DC C
4475 DC 86J4 W-86 n n ABS DC E
4475 DC 86J4 W-86 n ABS DC C
4475 DC 86J4 W-86 n ABS DC E
4484 DC 361H W-106 n ABS DC C
4484 DC 361H GLATT n n n ABS DC C
4486 DC 203X W-102 n n n ABS DC E
4512 DC 276W W-200 n n ABS DC C
4514 DC 65K2 W-111 n n ABS DC E
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
4515 DC 31L6 W-111 n n n n ABS DC E
4516 DC 88J7 W-111 n n n n ABS DC E
4517 DC 926H W-200 n ABS DC C
4518 DC 791V W-105 n ABS DC C
4518 DC 791V W-86 n n n n ABS DC C
4519 DC 114W GLATT n n ABS DC C
4521 DC 246K W-200 n n ABS DC C
4521 DC 246K W-87 n ABS DC C
4555 Fenix DC 07V7 GLATT n ABS DC E
4556 Fenix DC 11Q3 GLATT n ABS DC C
268
271
251
260
260
262
261
261
257
257
263
251
264
252
252
264
266
257
264
271
271
271
271
271
257
257
255
252
252
252
252
252
252
268
269
269
269
257
257
254
255
262
256
269
270
267
267
252
254
254
251
252
A –
E
41unverbindliche Empfehlung | non-binding recommendation40
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
ASD
ASDBucina
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1002 SF 6119 W-200 n n ABS UNI C
1007 SF 0547 W-200 n n n ABS UNI C
1022 SF 2109 W-200 n ABS UNI C
1036 SF 3311 W-200 n n n ABS UNI C
1036 SF 3311 W-87 n n n n ABS UNI C
1044 SF 261D W-200 n n ABS UNI C
1049P DC 319V GLATT n n n ABS HG P
3043 DC 535N W-200 n n ABS DC C
3068 DC 727L W-200 n n ABS DC C
3072 DC 204J W-105 n ABS DC C
3072 DC 204J W-224 n n n n ABS DC C
3083 DC 21J6 W-200 n ABS DC E
Döllken-Kanten passend zu | Döllken Edgebands to match
BucinaPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
6700 SF 6444 W-200 n n n ABS UNI C
6700 SF 6444 GLATT n n ABS UNI C
6701 SF 6346 W-200 n n n n n ABS UNI C
6701 SF 6346 GLATT n n n n n ABS UNI C
6701 SF 6346 W-101 n n n ABS UNI C
6701 SF 6346 W-87 n n n ABS UNI C
6701 SF 6346 W-105 n n n n ABS UNI C
6701 SF 6346 W-102 n n n ABS UNI C
6701 SF 6346 W-224 n n ABS UNI C
6702 SF 0110 W-101 n n ABS UNI C
6702 SF 0110 W-102 n ABS UNI C
6702 SF 0110 W-86 n ABS UNI C
6702 SF 0110 W-200 n n n n n ABS UNI C
6702 SF 0110 GLATT n n n ABS UNI C
6702 SF 0110 W-105 n n n ABS UNI C
6705 SF 1878 GLATT n n ABS UNI C
6705 SF 1878 W-200 n n n n ABS UNI C
6705 SF 1878 W-101 n n n ABS UNI C
6705 SF 1878 W-87 n n n n ABS UNI C
6705 SF 1878 W-224 n n ABS UNI C
6711 DC 569P W-87 n n ABS DC C
6711 DC 569P W-200 n ABS DC C
6714 DC 7008 W-88 n n n ABS DC C
6714 DC 7008 W-87 n n ABS DC C
6716 DC 7422 GLATT n n n ABS DC C
6717 SF 3311 W-200 n n n ABS UNI C
6717 SF 3311 W-87 n n n n ABS UNI C
6720 DC 494J W-105 n ABS DC C
6721 DC 7876 W-200 n n ABS DC C
6723 DC 569P W-87 n n ABS DC C
6723 DC 569P W-200 n ABS DC C
6727 DC 064J W-200 n ABS DC C
6728 DC 064J W-200 n ABS DC C
6730 DC 359J W-88 n ABS DC C
6730 DC 359J W-87 n ABS DC C
6731 DC 410K W-105 n n n n ABS DC C
6732 DC 116V P7166 n n ABS DC C
6732 DC 116V W-200 n ABS DC C
6733 DC 103V W-86 n ABS DC C
6733 DC 103V W-88 n n n ABS DC C
6734 DC 7871 W-200 n ABS DC C
6735 DC 356Q GLATT n ABS DC C
244
237
240
241
241
240
229
261
266
254
254
254
245
245
244
244
244
244
244
244
244
236
236
236
236
236
236
240
240
240
240
240
261
261
265
265
266
241
241
260
267
261
261
251
251
257
257
258
252
252
251
251
267
257
A –
E
42 43unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Bucina
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
6736 DC 569P W-87 n n ABS DC C
6736 DC 569P W-200 n ABS DC C
6738 DC 535N W-200 n n ABS DC C
6739 DC 283P GLATT n n ABS DC C
6741 DC 8525 W-200 n n n n n ABS DC E
6742 DC 396N W-86 n ABS DC C
6751 SF 4693 W-87 n n ABS UNI C
6751 SF 4693 W-101 n n n ABS UNI C
6751 SF 4693 W-200 n n n n ABS UNI C
6751 SF 4693 GLATT n n n n ABS UNI C
6751 SF 4693 W-86 n n n n ABS UNI C
6751 SF 4693 W-88 n n ABS UNI C
6752 SF 086A W-200 n ABS UNI C
6758 DC 517J W-87 n n ABS DC C
6758 DC 517J W-200 n ABS DC C
6762 DC 064J W-200 n ABS DC C
6768 DC 708N W-200 n ABS DC C
6768 DC 708N W-87 n n n n ABS DC C
6769 SF 862C W-200 n n n n n ABS UNI C
6769 SF 862C W-87 n n n ABS UNI C
6769 SF 862C W-224 n n ABS UNI C
6771 SF 5847 W-200 n n n ABS UNI C
6772 SF 0597 W-200 n n ABS UNI C
6777 SF 6346 W-200 n n n n n ABS UNI C
6777 SF 6346 GLATT n n n n n ABS UNI C
6777 SF 6346 W-101 n n n ABS UNI C
6777 SF 6346 W-87 n n n ABS UNI C
6777 SF 6346 W-105 n n n n ABS UNI C
6777 SF 6346 W-102 n n n ABS UNI C
6777 SF 6346 W-224 n n ABS UNI C
6790 SF 404C W-200 n n ABS UNI C
6790 SF 404C W-87 n n ABS UNI C
6816 SF 1086 W-87 n n ABS UNI C
6816 SF 1086 W-200 n n n ABS UNI C
6819 DC 041U W-86 n n n n ABS DC C
6821 DC 954M W-105 n n ABS DC C
6821 DC 954M W-200 n ABS DC C
6821 DC 954M W-87 n n n n ABS DC C
6828 DC 385L W-200 n ABS DC C
6828 DC 385L W-86 n n n n ABS DC C
6832 DC 727L W-200 n n ABS DC C
6834 DC 154V W-86 n n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
6834 DC 154V P7145 n n ABS DC C
DB1001 DC 8647 W-200 n n n n ABS DC C
DB1001 DC 8647 W-87 n n n ABS DC C
DB303 DC 8978 W-88 n ABS DC C
DB303 DC 8978 W-87 n ABS DC C
DB304 DC 7191 W-88 n ABS DC C
DB307 DC 7191 W-88 n ABS DC C
DB401 DC 7422 GLATT n n n ABS DC C
DB503 DC 6522 W-104 n ABS DC C
DB505 DC 204J W-105 n ABS DC C
DB505 DC 204J W-224 n n n n ABS DC C
DB903 DC 283P GLATT n n ABS DC C
FB2202 SF 0711 W-200 n n n ABS UNI C
UB2000 SF 6346 W-200 n n n n n ABS UNI C
UB2000 SF 6346 GLATT n n n n n ABS UNI C
UB2000 SF 6346 W-101 n n n ABS UNI C
UB2000 SF 6346 W-87 n n n ABS UNI C
UB2000 SF 6346 W-105 n n n n ABS UNI C
UB2000 SF 6346 W-102 n n n ABS UNI C
UB2000 SF 6346 W-224 n n ABS UNI C
UB2105 SF 0110 W-101 n n ABS UNI C
UB2105 SF 0110 W-102 n ABS UNI C
UB2105 SF 0110 W-86 n ABS UNI C
UB2105 SF 0110 W-200 n n n n n ABS UNI C
UB2105 SF 0110 GLATT n n n ABS UNI C
UB2105 SF 0110 W-105 n n n ABS UNI C
UB2200 SF 1878 GLATT n n ABS UNI C
UB2200 SF 1878 W-200 n n n n ABS UNI C
UB2200 SF 1878 W-101 n n n ABS UNI C
UB2200 SF 1878 W-87 n n n n ABS UNI C
UB2200 SF 1878 W-224 n n ABS UNI C
UB2300 SF 6214 W-200 n n ABS UNI C
261
261
261
255
268
258
242
242
242
242
242
242
238
260
260
251
265
265
246
246
246
243
237
244
244
244
244
244
244
244
241
241
239
239
250
271
271
271
257
257
266
252
252
269
269
270
270
265
265
266
262
254
254
255
238
244
244
244
244
244
244
244
236
236
236
236
236
236
240
240
240
240
240
244
A –
E
44 45unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
Cleaf
Cleaf
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
B003 SF 6107 W-200 n ABS UNI C
B004 SF 6107 W-200 n ABS UNI C
B007 SF 6346 W-200 n n n n n ABS UNI C
B007 SF 6346 GLATT n n n n n ABS UNI C
B007 SF 6346 W-101 n n n ABS UNI C
B007 SF 6346 W-87 n n n ABS UNI C
B007 SF 6346 W-105 n n n n ABS UNI C
B007 SF 6346 W-102 n n n ABS UNI C
B007 SF 6346 W-224 n n ABS UNI C
B011 SF 6444 W-200 n n n ABS UNI C
B011 SF 6444 GLATT n n ABS UNI C
B026 SF 5151 W-200 n n ABS UNI C
B026 SF 5151 GLATT n n n ABS UNI C
B026 SF 5151 W-87 n n n ABS UNI C
B041 SF 862C W-200 n n n n n ABS UNI C
B041 SF 862C W-87 n n n ABS UNI C
B041 SF 862C W-224 n n ABS UNI C
FA08 DC 952P W-200 n n n n n ABS DC E
FA21 DC 435K GLATT n ABS DC E
FA41 DC 90P6 W-232 n ABS DC E
FA42 DC 62J6 W-232 n ABS DC E
FA45 DC 41P0 W-232 n ABS DC E
FA47 DC 05U2 W-232 n ABS DC E
L603 DC 6548 W-88 n n n ABS DC C
L633 DC 281P GLATT n ABS DC C
L643 DC 694L W-200 n ABS DC C
L664 DC 064K W-200 n n ABS DC C
L684 DC 6522 W-104 n ABS DC C
L702 DC 8166 W-200 n n ABS DC C
L714 DC 188U W-86 n ABS DC C
L763 DC 913P GLATT n ABS DC C
L763 DC 913P W-86 n n n n ABS DC C
L775 DC 064J W-200 n ABS DC C
LA01 DC 954M W-105 n n ABS DC C
LA01 DC 954M W-200 n ABS DC C
LA01 DC 954M W-87 n n n n ABS DC C
LA53 DC 021K W-88 n n ABS DC C
LA54 DC 8176 W-88 n ABS DC C
LA57 DC 064K W-200 n n ABS DC C
LA59 DC 021K W-88 n n ABS DC C
LA79 DC 694L W-200 n ABS DC C
LA88 DC 021K W-88 n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
LA99 DC 913P GLATT n ABS DC C
LA99 DC 913P W-86 n n n n ABS DC C
LD02 DC 958X GLATT n n ABS DC C
LD02 DC 958X P7145 n n ABS DC C
LD15 DC 154V W-86 n n n ABS DC C
LD15 DC 154V P7145 n n ABS DC C
LD16 DC 728L W-200 n n ABS DC C
LD18 DC 359J W-88 n ABS DC C
LD18 DC 359J W-87 n ABS DC C
LD20 DC 7422 GLATT n n n ABS DC C
LD23 DC 569P W-87 n n ABS DC C
LD23 DC 569P W-200 n ABS DC C
LD28 DC 959N W-87 n ABS DC C
LD46 DC 7008 W-88 n n n ABS DC C
LD46 DC 7008 W-87 n n ABS DC C
LD80 DC 913P GLATT n ABS DC C
LD80 DC 913P W-86 n n n n ABS DC C
LD81 DC 913P GLATT n ABS DC C
LD81 DC 913P W-86 n n n n ABS DC C
LD91 DC 535N W-200 n n ABS DC C
LD94 DC 913P GLATT n ABS DC C
LD94 DC 913P W-86 n n n n ABS DC C
LG23 DC 913P GLATT n ABS DC C
LG23 DC 913P W-86 n n n n ABS DC C
LG24 DC 913P GLATT n ABS DC C
LG24 DC 913P W-86 n n n n ABS DC C
LG37 DC 083V P7166 n ABS DC C
LG40 DC 083V P7166 n ABS DC C
LG43 DC 913P GLATT n ABS DC C
LG43 DC 913P W-86 n n n n ABS DC C
LG61 DC 913P GLATT n ABS DC C
LG61 DC 913P W-86 n n n n ABS DC C
U104 SF 6414 W-200 n n n ABS UNI C
U116 SF 617A W-200 n ABS UNI C
U129 SF 0110 W-101 n n ABS UNI C
U129 SF 0110 W-102 n ABS UNI C
U129 SF 0110 W-86 n ABS UNI C
U129 SF 0110 W-200 n n n n n ABS UNI C
U129 SF 0110 GLATT n n n ABS UNI C
U129 SF 0110 W-105 n n n ABS UNI C
U147 SF 6107 W-200 n ABS UNI C
U189 SF 0707 W-200 n ABS UNI C
244
244
244
244
244
244
244
244
244
245
245
243
243
243
246
246
246
271
258
270
262
258
250
262
255
264
251
262
268
253
270
270
251
271
271
271
250
268
251
250
264
250
270
270
271
271
252
252
266
257
257
266
261
261
271
265
265
270
270
270
270
261
270
270
270
270
270
270
251
251
270
270
270
270
245
244
236
236
236
236
236
236
244
238
A –
E
46 47unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
DepalorPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
DK257SR9 DC 6640 W-200 n n ABS DC C 263
EB071 DC 7099 W-200 n n ABS DC E 265
EB987 DC 797K W-200 n n ABS DC E 267
EB987 DC 797K W-86 n ABS DC E 267
EB988 DC 8580 GLATT n ABS DC E 268
EB988 DC 8580 W-200 n ABS DC E 268
EB989 DC 952P W-200 n n n n n ABS DC E 271
EH281 DC 037J W-88 n ABS DC C 250
EH281 DC 037J GLATT n ABS DC C 250
EH286 DC 6522 W-104 n ABS DC C 262
EH301 DC 8978 W-88 n ABS DC C 270
EH301 DC 8978 W-87 n ABS DC C 270
EH515 DC 6635 W-88 n n ABS DC C 263
EH553 DC 103V W-86 n ABS DC C 251
EH553 DC 103V W-88 n n n ABS DC C 251
EH826 DC 064K W-200 n n ABS DC C 251
EH828 DC 958X GLATT n n ABS DC C 271
EH828 DC 958X P7145 n n ABS DC C 271
EH843 DC 728L W-200 n n ABS DC C 266
EH844 DC 185J W-87 n n ABS DC C 253
EH844 DC 185J W-88 n n n ABS DC C 253
EH845 DC 276W W-200 n n ABS DC C 255
EH848 DC 188U W-86 n ABS DC C 253
EH850 DC 6629 W-86 n n n ABS DC C 263
EH850 DC 6629 P7145 n n n ABS DC C 263
EH850 DC 6629 GLATT n n n ABS DC C 263
EH852 DC 364P W-86 n n ABS DC C 257
EH856 DC 099V W-105 n ABS DC C 251
EH856 DC 099V W-86 n n n ABS DC C 251
EH860 DC 728L W-200 n n ABS DC C 266
EH864 DC 708N W-200 n ABS DC C 265
EH864 DC 708N W-87 n n n n ABS DC C 265
EH941 DC 580M W-87 n n ABS DC C 261
EH943 DC 021K W-88 n n ABS DC C 250
EH947 DC 359J W-88 n ABS DC C 257
EH947 DC 359J W-87 n ABS DC C 257
EH962 DC 8176 W-88 n ABS DC C 268
EH965 DC 8166 W-200 n n ABS DC C 268
EH972 DC 030J W-87 n n ABS DC C 250
EH972 DC 030J W-86 n ABS DC C 250
EH972 DC 030J W-200 n n n n ABS DC C 250
EH975 DC 021K W-88 n n ABS DC C 250
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U189 SF 0707 W-86 n n n ABS UNI C
UA01 SF 1402 W-200 n n n n ABS UNI C
UA02 SF 482B P7166 n ABS UNI C
UA05 SF 1083 W-200 n n ABS UNI C
UA06 SF 5854 GLATT n ABS UNI C
UA06 SF 5854 W-87 n n ABS UNI C
UA06 SF 5854 W-200 n n n ABS UNI C
UA09 SF 5847 W-200 n n n ABS UNI C
UA15 SF 862C W-200 n n n n n ABS UNI C
UA15 SF 862C W-87 n n n ABS UNI C
UA15 SF 862C W-224 n n ABS UNI C
UA18 SF 0597 W-200 n n ABS UNI C
UA27 SF 6208 W-200 n n n n ABS UNI C
UA27 SF 6208 W-86 n n n n ABS UNI C
UA32 SF 0222 W-200 n ABS UNI C
UA49 SF 5992 W-200 n n n n n ABS UNI C
UA49 SF 5992 W-224 n n ABS UNI C
UA51 SF 5395 W-87 n n ABS UNI C
UA51 SF 5395 W-200 n n n n n ABS UNI C
UA59 SF 1086 W-87 n n ABS UNI C
UA59 SF 1086 W-200 n n n ABS UNI C
UA61 SF 336C W-200 n n n ABS UNI C
UA78 SF 578D W-87 n n n ABS UNI C
238
239
242
238
243
243
243
243
246
246
246
237
244
244
237
244
244
243
243
239
239
241
243
CleafDepalor
A –
E
48 49unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Depalor
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
EH991 DC 7422 GLATT n n n ABS DC C 266
EU007 SF 6287 W-200 n ABS UNI C 244
EU009 SF 3311 W-200 n n n ABS UNI C 241
EU009 SF 3311 W-87 n n n n ABS UNI C 241
EU011 SF 0110 W-101 n n ABS UNI C 236
EU011 SF 0110 W-102 n ABS UNI C 236
EU011 SF 0110 W-86 n ABS UNI C 236
EU011 SF 0110 W-200 n n n n n ABS UNI C 236
EU011 SF 0110 GLATT n n n ABS UNI C 236
EU011 SF 0110 W-105 n n n ABS UNI C 236
EU020 SF 1878 GLATT n n ABS UNI C 240
EU020 SF 1878 W-200 n n n n ABS UNI C 240
EU020 SF 1878 W-101 n n n ABS UNI C 240
EU020 SF 1878 W-87 n n n n ABS UNI C 240
EU020 SF 1878 W-224 n n ABS UNI C 240
EU021 SF 1138 W-200 n n n ABS UNI C 239
EU047 SF 6082 W-200 n n ABS UNI C 244
EU090 SF 4989 W-200 n n n ABS UNI C 242
EU090 SF 4989 W-87 n n n ABS UNI C 242
EU115 SF 6414 W-200 n n n ABS UNI C 245
EU138 SF 6414 W-200 n n n ABS UNI C 245
EU191 SF 5992 W-200 n n n n n ABS UNI C 244
EU191 SF 5992 W-224 n n ABS UNI C 244
EU309 SF 157A W-200 n n n ABS UNI C 240
EU316 SF 1878 GLATT n n ABS UNI C 240
EU316 SF 1878 W-200 n n n n ABS UNI C 240
EU316 SF 1878 W-101 n n n ABS UNI C 240
EU316 SF 1878 W-87 n n n n ABS UNI C 240
EU316 SF 1878 W-224 n n ABS UNI C 240
EU317 SF 6414 W-200 n n n ABS UNI C 245
EU318 SF 6403 W-200 n n n n ABS UNI C 244
EU329 SF 6241 W-101 n n ABS UNI C 244
EU329 SF 6241 W-200 n n n ABS UNI C 244
EU350 SF 086A W-200 n ABS UNI C 238
EU351 SF 5847 W-200 n n n ABS UNI C 243
EU352 SF 0597 W-200 n n ABS UNI C 237
EU357 SF 864A W-87 n n n ABS UNI C 246
EU886 SF 1402 W-200 n n n n ABS UNI C 239
EU892 SF 482B P7166 n ABS UNI C 242
EW059 SF 6346 W-200 n n n n n ABS UNI C 244
EW059 SF 6346 GLATT n n n n n ABS UNI C 244
EW059 SF 6346 W-101 n n n ABS UNI C 244
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
EW059 SF 6346 W-87 n n n ABS UNI C 244
EW059 SF 6346 W-105 n n n n ABS UNI C 244
EW059 SF 6346 W-102 n n n ABS UNI C 244
EW059 SF 6346 W-224 n n ABS UNI C 244
EW805 SF 1072 W-200 n n ABS UNI C 238
F70EU090 SF 1085 W-200 n n n ABS UNI C 238
F70EU317 SF 221A W-200 n ABS UNI C 240
F70EU317 SF 6214 W-200 n n ABS UNI C 244
F70EW805 SF 1072 W-200 n n ABS UNI C 238
F75EH287 DC 6629 W-86 n n n ABS DC C 263
F75EH287 DC 6629 P7145 n n n ABS DC C 263
F75EH287 DC 6629 GLATT n n n ABS DC C 263
F75EH943 DC 7422 GLATT n n n ABS DC C 266
SW112 SF 6346 W-200 n n n n n ABS UNI C 244
SW112 SF 6346 GLATT n n n n n ABS UNI C 244
SW112 SF 6346 W-101 n n n ABS UNI C 244
SW112 SF 6346 W-87 n n n ABS UNI C 244
SW112 SF 6346 W-105 n n n n ABS UNI C 244
SW112 SF 6346 W-102 n n n ABS UNI C 244
SW112 SF 6346 W-224 n n ABS UNI C 244
W006 SF 1083 W-200 n n ABS UNI C 238
A –
E
50 51unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Duratex
Döllken-Kanten passend zu | Döllken Edgebands to match
DuratexPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
Atual Noce Amado DC 551P W-110 n n ABS DC C
Atual Noce Arezzo DC 352Q W-88 n n ABS DC C
Atual Noce Arezzo DC 352Q W-200 n ABS DC C
Atual Scala Lancame SF 5151 W-200 n n ABS UNI C
Atual Scala Lancame SF 5151 GLATT n n n ABS UNI C
Atual Scala Lancame SF 5151 W-87 n n n ABS UNI C
Atula Acacia Clara DC 7239 W-104 n n ABS DC C
Atula Branco SF 5151 W-200 n n ABS UNI C
Atula Branco SF 5151 GLATT n n n ABS UNI C
Atula Branco SF 5151 W-87 n n n ABS UNI C
Atula Carvalho Gris DC 472X W-102 n n ABS DC E
Atula Cinza Matrix DC 952P W-200 n n n n n ABS DC E
Atula Grafite SF 897D W-200 n n ABS UNI C
Branco Artico SF 5151 W-200 n n ABS UNI C
Branco Artico SF 5151 GLATT n n n ABS UNI C
Branco Artico SF 5151 W-87 n n n ABS UNI C
Branco Diamante SF 617E W-200 n ABS UNI C
Branco Diamante SF 617E W-86 n n ABS UNI C
Branco Diamante SF 617E W-79 n n ABS UNI C
Carvalho Evora DC 66M8 W-111 n n n ABS DC E
Cinza Matrix DC 952P W-200 n n n n n ABS DC E
Cristal SF 3311 W-200 n n n ABS UNI C
Cristal SF 3311 W-87 n n n n ABS UNI C
Duna Branco Artico SF 960D W-101 n n n ABS UNI C
Duna Branco Diamant SF 091E W-86 n n n ABS UNI C
Duna Capuanp Lancam DC 364P W-86 n n ABS DC C
Duna Preto SF 0110 W-101 n n ABS UNI C
Duna Preto SF 0110 W-102 n ABS UNI C
Duna Preto SF 0110 W-86 n ABS UNI C
Duna Preto SF 0110 W-200 n n n n n ABS UNI C
Duna Preto SF 0110 GLATT n n n ABS UNI C
Duna Preto SF 0110 W-105 n n n ABS UNI C
Duna Wengue Supremo DC 31J4 W-105 n ABS DC C
Duna Wengue Supremo DC 31J4 W-86 n n ABS DC C
Essencial Branco Di SF 091E W-86 n n n ABS UNI C
Essencial Noce Mare DC 791V W-105 n ABS DC C
Essencial Noce Mare DC 791V W-86 n n n n ABS DC C
Essencial Nude Lanc SF 457E W-224 n ABS UNI C
Essencial Nude Lanc SF 457E W-200 n ABS UNI C
Essencial Nude Lanc SF 457E W-86 n n n n ABS UNI C
Essencial Nude Lanc SF 457E W-102 n n n ABS UNI C
Essencial Rovere Se DC 6708 W-105 n n ABS DC C
261
256
256
243
243
243
266
243
243
243
260
271
246
243
243
243
244
244
244
263
271
241
241
246
238
257
236
236
236
236
236
236
256
256
238
267
267
242
242
242
242
263
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
Lineo Textil SF 0693 W-200 n n ABS UNI C
Noce Verona DC 721H W-200 n ABS DC C
Nude Lancamento SF 457E W-224 n ABS UNI C
Nude Lancamento SF 457E W-200 n ABS UNI C
Nude Lancamento SF 457E W-86 n n n n ABS UNI C
Nude Lancamento SF 457E W-102 n n n ABS UNI C
Olivia Zayit DC 352Q W-88 n n ABS DC C
Olivia Zayit DC 352Q W-200 n ABS DC C
Original Branco Art SF 6346 W-200 n n n n n ABS UNI C
Original Branco Art SF 6346 GLATT n n n n n ABS UNI C
Original Branco Art SF 6346 W-101 n n n ABS UNI C
Original Branco Art SF 6346 W-87 n n n ABS UNI C
Original Branco Art SF 6346 W-105 n n n n ABS UNI C
Original Branco Art SF 6346 W-102 n n n ABS UNI C
Original Branco Art SF 6346 W-224 n n ABS UNI C
Original Cristal SF 3311 W-200 n n n ABS UNI C
Original Cristal SF 3311 W-87 n n n n ABS UNI C
Original Maple Bilb DC 385L W-200 n ABS DC C
Original Maple Bilb DC 385L W-86 n n n n ABS DC C
Original Ovo SF 561D W-200 n n n ABS UNI C
Preto SF 0110 W-101 n n ABS UNI C
Preto SF 0110 W-102 n ABS UNI C
Preto SF 0110 W-86 n ABS UNI C
Preto SF 0110 W-200 n n n n n ABS UNI C
Preto SF 0110 GLATT n n n ABS UNI C
Preto SF 0110 W-105 n n n ABS UNI C
Preto DC 71P3 W-80 n n n ABS DC E
Prisam Nogueira Alv DC 72M8 W-111 n ABS DC E
Prisma Carvalho Evo DC 879H W-105 n n n ABS DC C
Prisma Ebano Marona DC 42N6 W-87 n ABS DC C
Prisma Nogueira Cad DC 721H W-200 n ABS DC C
Rovere Marsala DC 10K0 W-105 n n ABS DC C
Rovere Sereno SF 437E W-200 n n ABS UNI C
Rovere Sereno SF 437E W-86 n n n ABS UNI C
Scala Lancamento SF 437E W-200 n n ABS UNI C
Scala Lancamento SF 437E W-86 n n n ABS UNI C
Trama Gianduia SF 636D W-200 n n n n ABS UNI C
Trama Preto SF 0110 W-101 n n ABS UNI C
Trama Preto SF 0110 W-102 n ABS UNI C
Trama Preto SF 0110 W-86 n ABS UNI C
Trama Preto SF 0110 W-200 n n n n n ABS UNI C
Trama Preto SF 0110 GLATT n n n ABS UNI C
238
266
242
242
242
242
256
256
244
244
244
244
244
244
244
241
241
257
257
243
236
236
236
236
236
236
266
266
269
258
266
251
242
242
242
242
244
236
236
236
236
236
A –
E
52 53unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
DuratexEgger Eurodekore 2012
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
Trama Preto SF 0110 W-105 n n n ABS UNI C
Trama Roble Annecy DC 89N0 W-102 n ABS DC E
Trama Sirena SF 206E W-87 n ABS UNI C
Wengue Supremo DC 115W W-86 n n ABS DC C
236
270
240
252
Döllken-Kanten passend zu | Döllken Edgebands to match
Egger Eurodekore 2012PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F210 DC 71P4 W-86 n n n ABS DC E
F211 DC 65P8 W-86 n n ABS DC C
F236 DC 88P1 W-87 n n ABS DC C
F238 DC 75P0 W-87 n n ABS DC E
F274 DC 563X W-86 n n n n ABS DC E
F275 DC 32L2 W-86 n n n n ABS DC E
F276 DC 38P3 W-86 n n n ABS DC E
F310 DC 30V5 W-235 n n n ABS DC E
F311 DC 30V6 W-235 n n n ABS DC E
F381 DC 69P9 W-249 n n ABS DC E
F381 DC 69P9 W-87 n ABS DC E
F396 DC 74N3 W-249 n n ABS DC E
F396 DC 74N3 W-87 n ABS DC E
F425 DC 36M1 W-249 n n ABS DC E
F425 DC 36M1 W-87 n ABS DC E
F426 DC 69P7 W-249 n n ABS DC E
F426 DC 69P7 W-87 n ABS DC E
F427 DC 70P0 W-249 n n ABS DC E
F427 DC 70P0 W-87 n ABS DC E
F428 DC 30P4 W-249 n n ABS DC E
F428 DC 30P4 W-87 n ABS DC E
F436 SF 437E W-200 n n ABS UNI C
F436 SF 437E W-86 n n n ABS UNI C
F440 DC 28N1 W-200 n n ABS DC E
F447 DC 29P1 W-200 n n n ABS DC E
F488 DC 608H W-200 n n n ABS DC E
F489 DC 03J2 W-200 n ABS DC E
F495 DC 68P7 W-200 n n ABS DC E
F501 DC 8525 W-200 n n n n n ABS DC E
F509 DC 952P W-200 n n n n n ABS DC E
F583 DC 69L0 W-111 n n n ABS DC E
F584 DC 629N W-87 n ABS DC E
F584 DC 629N W-105 n ABS DC C
F584 DC 629N W-111 n n n ABS DC E
F633 DC 94L3 W-87 n n n ABS DC C
F636 DC 87P9 W-87 n ABS DC C
F784 DC 200X W-200 n n n ABS DC E
F870 DC 70P1 W-249 n n ABS DC E
F870 DC 70P1 W-87 n ABS DC E
F900 DC 88P2 W-86 n n ABS DC E
F901 DC 65P7 W-86 n n ABS DC C
H1110 DC 69P8 W-249 n n ABS DC E
266
263
270
266
261
256
257
256
256
265
265
266
266
257
257
265
265
265
265
255
255
242
242
255
255
262
250
264
268
271
264
262
262
262
271
269
253
265
265
270
263
265
A –
E
54 55unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Egger Eurodekore 2012
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
H1110 DC 69P8 W-87 n ABS DC E
H1111 ST15 DC 76P2 W-87 n n ABS DC C
H1129 DC 78P4 W-87 n n n ABS DC C
H1137 DC 195U W-88 n n n ABS DC C
H1145 DC 30P1 W-249 n n ABS DC E
H1145 DC 30P1 W-87 n n ABS DC E
H1146 DC 59N8 W-111 n n n ABS DC E
H1150 DC 67M7 W-249 n n ABS DC C
H1150 DC 67M7 W-87 n ABS DC C
H1151 DC 11P7 W-111 n n n n ABS DC E
H1158 DC 84U4 W-249 n ABS DC E
H1158 DC 84U4 W-249 n ABS DC C
H1158 DC 84U4 W-249 n ABS DC E
H1215 DC 66M8 W-111 n n n ABS DC E
H1250 DC 30V0 W-79 n n n ABS DC E
H1277 DC 791V W-105 n ABS DC C
H1277 DC 791V W-86 n n n n ABS DC C
H1298 DC 65P4 W-111 n n n n ABS DC E
H1319 DC 8196 W-104 n n ABS DC C
H1319 DC 8196 W-88 n ABS DC C
H1334 DC 913P GLATT n ABS DC C
H1334 DC 913P W-86 n n n n ABS DC C
H1342 DC 506W W-105 n ABS DC C
H1372 DC 54M0 W-111 n n n ABS DC E
H1377 DC 30V1 W-79 n n n ABS DC E
H1379 DC 29V9 W-224 n ABS DC E
H1379 DC 29V9 W-79 n n n ABS DC E
H1381 DC 784J W-104 n ABS DC C
H1381 DC 784J W-88 n ABS DC C
H1424 DC 47L0 W-105 n ABS DC C
H1424 DC 31L6 W-111 n n n n ABS DC E
H1428 DC 09L4 W-111 n n n n ABS DC E
H1474 DC 65K4 W-111 n n n ABS DC E
H1476 DC 65K3 W-111 n n n n ABS DC E
H1477 DC 65K2 W-111 n n ABS DC E
H1478 DC 67N1 W-111 n ABS DC E
H1484 DC 21M6 W-111 n n n ABS DC E
H1486 DC 30V7 W-79 n n ABS DC C
H1486 DC 30V7 W-79 n ABS DC E
H1487 DC 30P3 W-111 n n n ABS DC E
H1502 DC 8647 W-200 n n n n ABS DC C
H1502 DC 8647 W-87 n n n ABS DC C
265
267
267
253
255
255
262
264
264
252
268
268
268
263
255
267
267
263
268
268
270
270
260
261
255
255
255
267
267
260
256
251
262
262
262
264
254
256
256
255
269
269
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
H1511 DC 10L1 W-87 n n n ABS DC C
H1518 DC 030J W-87 n n ABS DC C
H1518 DC 030J W-86 n ABS DC C
H1518 DC 030J W-200 n n n n ABS DC C
H1521 DC 703Q W-86 n ABS DC C
H1521 DC 703Q W-200 n ABS DC C
H1521 DC 703Q W-87 n n n ABS DC C
H1521 DC 703Q W-88 n n n ABS DC C
H1532 DC 517J W-87 n n ABS DC C
H1532 DC 517J W-200 n ABS DC C
H1555 DC 03J3 W-105 n ABS DC C
H1555 DC 03J3 W-87 n n n n ABS DC C
H1582 DC 191W W-200 n ABS DC C
H1582 DC 191W W-87 n n n n ABS DC C
H1599 DC 913L W-87 n n n ABS DC C
H1615 DC 17L9 W-88 n ABS DC C
H1615 DC 17L9 W-87 n ABS DC C
H1615 DC 17L9 W-86 n n n ABS DC C
H1706 DC 7008 W-88 n n n ABS DC C
H1706 DC 7008 W-87 n n ABS DC C
H1709 DC 148J W-105 n n n n ABS DC C
H1713 DC 191Q W-200 n ABS DC C
H1725 DC 66P3 W-249 n ABS DC E
H1733 DC 385L W-200 n ABS DC C
H1733 DC 385L W-86 n n n n ABS DC C
H1793 DC 29V8 W-224 n n n ABS DC C
H1796 DC 44U1 W-224 n n n ABS DC C
H1867 DC 167K P7166 n n n n ABS DC C
H1869 DC 283P GLATT n n ABS DC C
H1869 DC 459X W-105 n ABS DC C
H1887 DC 6629 W-86 n n n ABS DC C
H1887 DC 6629 P7145 n n n ABS DC C
H1887 DC 6629 GLATT n n n ABS DC C
H1920 DC 154V W-86 n n n ABS DC C
H1920 DC 154V P7145 n n ABS DC C
H1950 DC 18L6 W-87 n n n n ABS DC C
H1951 DC 708N W-200 n ABS DC C
H1951 DC 708N W-87 n n n n ABS DC C
H1952 DC 36L4 W-87 n n n n ABS DC C
H3005 DC 516U W-111 n n n ABS DC E
H3006 DC 14L3 SL111 n ABS DC E
H3006 DC 14L3 W-111 n n n ABS DC E
251
250
250
250
265
265
265
265
260
260
250
250
253
253
270
253
253
253
265
265
252
253
263
257
257
255
259
253
255
259
263
263
263
252
252
253
265
265
257
260
252
252
A –
E
56 57unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Egger Eurodekore 2012
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
H3012 DC 86L0 W-111 n n n ABS DC E
H3025 DC 308Y W-86 n n ABS DC C
H3031 DC 010Y GLATT n 3D 3D P
H3031 DC 16J7 W-105 n n ABS DC C
H3031 DC 16J7 W-86 n n n ABS DC C
H3031 DC 16J7 W-87 n n ABS DC C
H3058 DC 72M1 W-111 n n n ABS DC E
H3070 DC 35L0 W-111 n n ABS DC E
H3078 DC 597H W-111 n n n n ABS DC E
H3080 DC 8750 W-105 n ABS DC C
H3080 DC 8750 W-87 n n n ABS DC C
H3081 DC 04L4 W-111 n n n ABS DC E
H3082 DC 15J4 W-111 n n n ABS DC E
H3090 DC 88J7 W-111 n n n n ABS DC E
H3113 DC 50P5 W-87 n n n ABS DC C
H3114 DC 337W W-105 n ABS DC C
H3114 DC 337W W-86 n n n ABS DC C
H3128 DC 156W W-87 n n n ABS DC C
H3129 DC 337W W-105 n ABS DC C
H3129 DC 337W W-86 n n n ABS DC C
H3303 DC 43P6 W-249 n n ABS DC E
H3303 DC 43P6 W-87 n ABS DC E
H3304 DC 793H W-200 n ABS DC C
H3304 DC 042U W-86 n n n ABS DC C
H3306 DC 18L8 GLATT n n n n ABS DC C
H3309 DC 77U1 W-88 n n n ABS DC C
H3325 DC 53U2 W-88 n n n n ABS DC C
H3326 DC 52U9 W-88 n n n n ABS DC C
H3331 DC 69P4 W-249 n n ABS DC E
H3331 DC 69P4 W-87 n ABS DC E
H3332 DC 69P3 W-249 n n ABS DC E
H3332 DC 69P3 W-87 n ABS DC E
H3344 DC 30V2 W-79 n n n ABS DC E
H3363 DC 12L0 W-79 n ABS DC E
H3363 DC 12L0 W-86 n ABS DC C
H3363 DC 12L0 W-86 n ABS DC E
H3363 DC 12L0 W-86 n n ABS DC E
H3368 DC 36L0 W-86 n ABS DC C
H3370 DC 88K3 W-111 n n n ABS DC E
H3380 DC 8750 W-105 n ABS DC C
H3380 DC 8750 W-87 n n n ABS DC C
H3382 DC 099V W-105 n ABS DC C
269
255
222
253
253
253
266
257
262
269
269
250
252
269
260
256
256
252
256
256
258
258
267
250
253
267
261
260
265
265
265
265
255
252
252
252
252
257
269
269
269
251
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
H3382 DC 019Y W-200 n ABS DC C
H3382 DC 099V W-86 n n n ABS DC C
H3387 DC 608Y W-224 n n n ABS DC C
H3389 DC 204J W-105 n ABS DC C
H3389 DC 204J W-224 n n n n ABS DC C
H3400 DC 202X W-102 n n n ABS DC E
H3420 DC 30V8 W-79 n n n ABS DC E
H3660 DC 439M GLATT n n n ABS DC C
H3662 DC 68P9 W-86 n ABS DC C
H3700 DC 69P5 W-249 n n ABS DC E
H3700 DC 69P5 W-87 n n ABS DC E
H3702 DC 69P6 W-249 n n ABS DC E
H3702 DC 69P6 W-87 n ABS DC E
H3703 DC 116V P7166 n n ABS DC C
H3703 DC 116V W-200 n ABS DC C
H3704 DC 388U W-200 n ABS DC C
H3704 DC 388U W-87 n n n n ABS DC C
H3713 DC 450V W-86 n n ABS DC C
H3734 DC 656W W-86 n n n n ABS DC C
H3753 DC 65P6 W-111 n n n ABS DC E
H3755 DC 30P2 W-111 n n n ABS DC E
H3758 DC 64P4 W-86 n n ABS DC C
H3760 DC 30V3 W-88 n n n ABS DC E
H3766 DC 30V4 W-88 n n n ABS DC E
H3775 DC 67N7 W-87 n ABS DC C
H3775 DC 67N7 W-86 n n n n ABS DC C
H3778 DC 38P2 W-86 n n n ABS DC C
H3840 DC 65P5 W-86 n n ABS DC C
H3840 DC 65P5 W-105 n ABS DC C
H3911 DC 68P8 W-86 n n n ABS DC C
U100 SF 5971 W-200 n n n n ABS UNI C
U100 SF 5971 W-224 n n ABS UNI C
U104 SF 862C W-200 n n n n n ABS UNI C
U104 SF 862C W-87 n n n ABS UNI C
U104 SF 862C W-224 n n ABS UNI C
U107 SF 0707 W-200 n ABS UNI C
U107 SF 0707 W-86 n n n ABS UNI C
U108 SF 836B W-224 n ABS UNI C
U108 SF 836B W-87 n n n ABS UNI C
U108 DC 944U GLATT n ABS HG P
U112 SF 6414 W-200 n n n ABS UNI C
U113 SF 735A W-200 n n n ABS UNI C
250
251
262
254
254
272
256
258
264
265
265
265
265
252
252
257
257
259
262
263
255
262
255
256
264
264
257
263
263
264
244
244
246
246
246
238
238
245
245
232
245
245
A –
E
58 59unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Egger Eurodekore 2012
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U113 SF 735A W-87 n n n ABS UNI C
U114 SF 556B W-87 n n n ABS UNI C
U129 SF 995E W-87 n ABS UNI C
U140 SF 99A9 W-86 n n ABS UNI C
U142 SF 01B8 W-86 n n ABS UNI C
U143 SF 115A W-87 n n n ABS UNI C
U146 SF 10B1 W-87 n n ABS UNI C
U147 SF 01B9 W-87 n n ABS UNI C
U156 SF 6208 W-200 n n n n ABS UNI C
U156 SF 6208 W-86 n n n n ABS UNI C
U204 SF 02B0 W-86 n n n n ABS UNI C
U206 SF 03B9 W-86 n n n ABS UNI C
U215 SF 1138 W-200 n n n ABS UNI C
U216 SF 6403 W-200 n n n n ABS UNI C
U222 SF 4989 W-200 n n n ABS UNI C
U222 SF 4989 W-87 n n n ABS UNI C
U224 SF 010D W-87 n n ABS UNI C
U311 SF 1086 W-87 n n ABS UNI C
U311 DC 105W GLATT n ABS HG P
U311 SF 1086 W-200 n n n ABS UNI C
U317 SF 01B7 W-86 n n n ABS UNI C
U321 SF 5395 W-87 n n ABS UNI C
U321 SF 5395 W-200 n n n n n ABS UNI C
U323 SF 304D W-87 n n n ABS UNI C
U328 SF 596E W-87 n n ABS UNI C
U329 SF 122E W-87 n n n ABS UNI C
U330 SF 404D W-86 n n n ABS UNI C
U332 SF 04B0 W-87 n n n ABS UNI C
U334 SF 02B1 W-86 n n n ABS UNI C
U336 SF 88A3 W-86 n n n ABS UNI C
U337 ST9 SF 02B2 W-86 n n n ABS UNI C
U343 SF 59B3 W-86 n n n ABS UNI C
U400 SF 345D W-87 n n n ABS UNI C
U506 SF 743B W-87 n n n ABS UNI C
U508 SF 99A8 W-86 n n ABS UNI C
U514 SF 482B P7166 n ABS UNI C
U518 SF 659B W-87 n ABS UNI C
U518 SF 659B W-86 n n n ABS UNI C
U522 SF 864A W-87 n n n ABS UNI C
U525 SF 05B3 W-87 n n n ABS UNI C
U532 SF 750A W-87 n n ABS UNI C
U533 SF 03B8 W-87 n ABS UNI C
245
243
246
246
237
239
239
237
244
244
237
237
239
244
242
242
236
239
228
239
237
243
243
241
243
239
241
237
237
246
237
244
241
245
246
242
245
245
246
237
245
237
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U536 SF 05B5 W-87 n n ABS UNI C
U537 SF 04B5 W-87 n n ABS UNI C
U538 SF 04B8 W-87 n n ABS UNI C
U539 SF 05B4 W-86 n n n ABS UNI C
U540 SF 0497 W-200 n n ABS UNI C
U608 SF 99A7 W-86 n ABS UNI C
U608 SF 99A7 W-87 n ABS UNI C
U617 SF 88A4 W-86 n n n ABS UNI C
U625 SF 481B W-200 n ABS UNI C
U625 SF 481B W-87 n n n ABS UNI C
U628 SF 386A W-200 n n ABS UNI C
U630 SF 580D W-87 n n n ABS UNI C
U631 SF 286E W-86 n n n ABS UNI C
U632 SF 04B6 W-87 n n n ABS UNI C
U633 SF 88A5 W-87 n n n ABS UNI C
U634 SF 04B7 W-87 n ABS UNI C
U635 SF 01B3 W-86 n n n ABS UNI C
U701 SF 666A W-200 n n ABS UNI C
U702 SF 57B9 W-224 n ABS UNI C
U702 SF 57B9 W-87 n n n ABS UNI C
U708 SF 1878 GLATT n n ABS UNI C
U708 SF 1878 W-200 n n n n ABS UNI C
U708 SF 1878 W-101 n n n ABS UNI C
U708 SF 1878 W-87 n n n n ABS UNI C
U708 SF 1878 W-224 n n ABS UNI C
U717 SF 303E W-87 n n ABS UNI C
U717 SF 303E W-224 n n ABS UNI C
U727 SF 457E W-224 n ABS UNI C
U727 SF 457E W-200 n ABS UNI C
U727 SF 457E W-86 n n n n ABS UNI C
U727 SF 457E W-102 n n n ABS UNI C
U727 DC 75P2 W-111 n n n ABS DC E
U730 SF 636D W-200 n n n n ABS UNI C
U732 SF 0179 W-200 n n n ABS UNI C
U732 SF 0179 W-87 n n n n ABS UNI C
U741 SF 423C W-224 n ABS UNI C
U741 SF 423C W-86 n n n n ABS UNI C
U741 DC 75P1 W-111 n n ABS DC E
U748 SF 56B1 W-86 n n n ABS UNI C
U750 SF 0549 W-200 n n n n ABS UNI C
U763 SF 3311 W-200 n n n ABS UNI C
U763 SF 3311 W-87 n n n n ABS UNI C
238
237
237
238
237
246
246
246
242
242
241
243
240
237
246
237
237
245
243
243
240
240
240
240
240
241
241
242
242
242
242
267
244
236
236
241
241
266
243
237
241
241
A –
E
60 61
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Egger Eurodekore 2012
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U763 DC 88P0 W-80 n n ABS DC E
U765 SF 6211 W-200 n n ABS UNI C
U765 SF 6211 W-87 n n n ABS UNI C
U775 SF 1081 W-87 n n n n ABS UNI C
U795 SF 201E W-87 n n n ABS UNI C
U803 SF 579D W-87 n n n ABS UNI C
U807 SF 14B3 W-86 n n n ABS UNI C
U808 SF 07B6 W-86 n n ABS UNI C
U960 SF 288B W-200 n n ABS UNI C
U961 DC 31L5 GLATT n n ABS HG P
U961 SF 5992 W-200 n n n n n ABS UNI C
U961 SF 5992 W-224 n n ABS UNI C
U963 SF 1402 W-200 n n n n ABS UNI C
U999 DC 71P3 W-80 n n n ABS DC E
U999 SF 0110 W-101 n n ABS UNI C
U999 SF 0110 W-102 n ABS UNI C
U999 SF 0110 W-86 n ABS UNI C
U999 DC 319V GLATT n n n ABS HG P
U999 SF 0110 W-200 n n n n n ABS UNI C
U999 SF 0110 GLATT n n n ABS UNI C
U999 SF 0110 W-105 n n n ABS UNI C
W1000 SF 4693 W-87 n n ABS UNI C
W1000 DC 498V GLATT n n n ABS HG P
W1000 SF 4693 W-101 n n n ABS UNI C
W1000 SF 4693 W-200 n n n n ABS UNI C
W1000 SF 4693 GLATT n n n n ABS UNI C
W1000 SF 4693 W-86 n n n n ABS UNI C
W1000 SF 08A8 W-102 n n n n ABS UNI C
W1000 SF 4693 W-88 n n ABS UNI C
W1000 DC 30P0 W-80 n n n n ABS DC E
W1100 SF 07B5 W-86 n ABS UNI C
W1200 SF 3401 W-224 n ABS UNI C
W1200 SF 3401 W-200 n n n n ABS UNI C
W1200 SF 3401 W-86 n n n ABS UNI C
W908 SF 6346 W-200 n n n n n ABS UNI C
W908 SF 6346 GLATT n n n n n ABS UNI C
W908 SF 6346 W-101 n n n ABS UNI C
W908 SF 6346 W-87 n n n ABS UNI C
W908 SF 6346 W-105 n n n n ABS UNI C
W908 SF 6346 W-102 n n n ABS UNI C
W908 SF 6346 W-224 n n ABS UNI C
W911 SF 5151 W-200 n n ABS UNI C
269
244
244
238
240
243
239
238
241
229
244
244
239
266
236
236
236
229
236
236
236
242
230
242
242
242
242
238
242
255
238
241
241
241
244
244
244
244
244
244
244
243
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
W911 SF 5151 GLATT n n n ABS UNI C
W911 SF 5151 W-87 n n n ABS UNI C
W980 DC 263V GLATT n n n ABS HG P
W980 SF 6346 W-200 n n n n n ABS UNI C
W980 SF 6346 GLATT n n n n n ABS UNI C
W980 SF 6346 W-101 n n n ABS UNI C
W980 SF 6346 W-87 n n n ABS UNI C
W980 SF 6346 W-105 n n n n ABS UNI C
W980 SF 6346 W-102 n n n ABS UNI C
W980 SF 6346 W-224 n n ABS UNI C
243
243
229
244
244
244
244
244
244
244
F
62 63unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Falco
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
103 SF 6346 W-200 n n n n n ABS UNI C
103 SF 6346 GLATT n n n n n ABS UNI C
103 SF 6346 W-101 n n n ABS UNI C
103 SF 6346 W-87 n n n ABS UNI C
103 SF 6346 W-105 n n n n ABS UNI C
103 SF 6346 W-102 n n n ABS UNI C
103 SF 6346 W-224 n n ABS UNI C
108 SF 4693 W-87 n n ABS UNI C
108 SF 4693 W-101 n n n ABS UNI C
108 SF 4693 W-200 n n n n ABS UNI C
108 SF 4693 GLATT n n n n ABS UNI C
108 SF 4693 W-86 n n n n ABS UNI C
108 SF 4693 W-88 n n ABS UNI C
200 SF 0110 W-101 n n ABS UNI C
200 SF 0110 W-102 n ABS UNI C
200 SF 0110 W-86 n ABS UNI C
200 SF 0110 W-200 n n n n n ABS UNI C
200 SF 0110 GLATT n n n ABS UNI C
200 SF 0110 W-105 n n n ABS UNI C
210 SF 5395 W-87 n n ABS UNI C
210 SF 5395 W-200 n n n n n ABS UNI C
213 SF 0436 W-200 n n ABS UNI C
216 SF 1086 W-87 n n ABS UNI C
216 SF 1086 W-200 n n n ABS UNI C
271 SF 1402 W-200 n n n n ABS UNI C
307 SF 539B W-200 n n ABS UNI C
314 SF 1330 W-200 n n n ABS UNI C
317 SF 288B W-200 n n ABS UNI C
329 SF 6414 W-200 n n n ABS UNI C
333 SF 6208 W-200 n n n n ABS UNI C
333 SF 6208 W-86 n n n n ABS UNI C
344 SF 221A W-200 n ABS UNI C
345 SF 1878 GLATT n n ABS UNI C
345 SF 1878 W-200 n n n n ABS UNI C
345 SF 1878 W-101 n n n ABS UNI C
345 SF 1878 W-87 n n n n ABS UNI C
345 SF 1878 W-224 n n ABS UNI C
347 SF 862C W-200 n n n n n ABS UNI C
347 SF 862C W-87 n n n ABS UNI C
347 SF 862C W-224 n n ABS UNI C
401 DC 6794 W-88 n n ABS DC C
408 DC 913P GLATT n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
Falco
244
244
244
244
244
244
244
242
242
242
242
242
242
236
236
236
236
236
236
243
243
237
239
239
239
243
239
241
245
244
244
240
240
240
240
240
240
246
246
246
264
270
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
408 DC 913P W-86 n n n n ABS DC C
417 DC 10K0 W-105 n n ABS DC C
418 DC 694L W-200 n ABS DC C
438 DC 8172 W-200 n ABS DC C
438 DC 8172 W-88 n ABS DC C
444 DC 8446 W-200 n ABS DC C
445 DC 385L W-200 n ABS DC C
445 DC 385L W-86 n n n n ABS DC C
458 DC 630K W-87 n ABS DC C
461 DC 954M W-105 n n ABS DC C
461 DC 954M W-200 n ABS DC C
461 DC 954M W-87 n n n n ABS DC C
463 DC 33J0 W-200 n ABS DC C
465 DC 156W W-87 n n n ABS DC C
466 DC 727L W-200 n n ABS DC C
467 DC 596J W-200 n n ABS DC C
468 DC 381N W-105 n n ABS DC C
482 DC 8647 W-200 n n n n ABS DC C
482 DC 8647 W-87 n n n ABS DC C
494 DC 8176 W-88 n ABS DC C
504 DC 041U W-86 n n n n ABS DC C
514 DC 041U W-86 n n n n ABS DC C
515 DC 27K6 W-111 n ABS DC E
516 DC 65K3 W-111 n n n n ABS DC E
517 DC 65K2 W-111 n n ABS DC E
518 DC 861U W-200 n n n ABS DC C
521 DC 945L W-200 n ABS DC C
522 DC 958X GLATT n n ABS DC C
522 DC 958X P7145 n n ABS DC C
533 DC 945L W-200 n ABS DC C
540 DC 099V W-105 n ABS DC C
540 DC 099V W-86 n n n ABS DC C
541 DC 905X W-200 n n n ABS DC C
551 DC 375Y W-200 n ABS DC C
552 DC 927H W-200 n n ABS DC C
571 DC 112W W-105 n n ABS DC C
602 DC 251V GLATT n n ABS DC C
603 DC 595N W-111 n ABS DC E
603 DC 595N W-200 n ABS DC E
649 DC 708N W-200 n ABS DC C
649 DC 708N W-87 n n n n ABS DC C
780 DC 8580 GLATT n ABS DC E
270
251
264
268
268
268
257
257
262
271
271
271
256
252
266
262
257
269
269
268
250
250
255
262
262
268
271
271
271
271
251
251
270
257
271
251
254
262
262
265
265
268
F
64 65unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
780 DC 8580 W-200 n ABS DC E
FalcoFantoni
268
Döllken-Kanten passend zu | Döllken Edgebands to match
FantoniPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
109 SF 5151 W-200 n n ABS UNI C
109 SF 5151 GLATT n n n ABS UNI C
109 SF 5151 W-87 n n n ABS UNI C
110 SF 6346 W-200 n n n n n ABS UNI C
110 SF 6346 GLATT n n n n n ABS UNI C
110 SF 6346 W-101 n n n ABS UNI C
110 SF 6346 W-87 n n n ABS UNI C
110 SF 6346 W-105 n n n n ABS UNI C
110 SF 6346 W-102 n n n ABS UNI C
110 SF 6346 W-224 n n ABS UNI C
111 SF 6346 W-200 n n n n n ABS UNI C
111 SF 6346 GLATT n n n n n ABS UNI C
111 SF 6346 W-101 n n n ABS UNI C
111 SF 6346 W-87 n n n ABS UNI C
111 SF 6346 W-105 n n n n ABS UNI C
111 SF 6346 W-102 n n n ABS UNI C
111 SF 6346 W-224 n n ABS UNI C
118 SF 6346 W-200 n n n n n ABS UNI C
118 SF 6346 GLATT n n n n n ABS UNI C
118 SF 6346 W-101 n n n ABS UNI C
118 SF 6346 W-87 n n n ABS UNI C
118 SF 6346 W-105 n n n n ABS UNI C
118 SF 6346 W-102 n n n ABS UNI C
118 SF 6346 W-224 n n ABS UNI C
120 SF 4693 W-87 n n ABS UNI C
120 SF 4693 W-101 n n n ABS UNI C
120 SF 4693 W-200 n n n n ABS UNI C
120 SF 4693 GLATT n n n n ABS UNI C
120 SF 4693 W-86 n n n n ABS UNI C
120 SF 4693 W-88 n n ABS UNI C
121 SF 6346 W-200 n n n n n ABS UNI C
121 SF 6346 GLATT n n n n n ABS UNI C
121 SF 6346 W-101 n n n ABS UNI C
121 SF 6346 W-87 n n n ABS UNI C
121 SF 6346 W-105 n n n n ABS UNI C
121 SF 6346 W-102 n n n ABS UNI C
121 SF 6346 W-224 n n ABS UNI C
122 SF 862C W-200 n n n n n ABS UNI C
122 SF 862C W-87 n n n ABS UNI C
122 SF 862C W-224 n n ABS UNI C
124 SF 6403 W-200 n n n n ABS UNI C
1327 DC 959N W-87 n ABS DC C
243
243
243
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
242
242
242
242
242
242
244
244
244
244
244
244
244
246
246
246
244
271
F
66 67unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Fantoni
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
134 SF 1072 W-200 n n ABS UNI C
1346 DC 6522 W-104 n ABS DC C
136 SF 617E W-200 n ABS UNI C
136 SF 617E W-86 n n ABS UNI C
136 SF 617E W-79 n n ABS UNI C
1389 DC 6635 W-88 n n ABS DC C
1681 DC 33J0 W-200 n ABS DC C
1799 DC 569P W-87 n n ABS DC C
1799 DC 569P W-200 n ABS DC C
1807 DC 8176 W-88 n ABS DC C
1847 DC 7008 W-88 n n n ABS DC C
1847 DC 7008 W-87 n n ABS DC C
2018 DC 138V W-200 n n n ABS DC C
2018 DC 138V P7145 n n n ABS DC C
2378 DC 04L5 W-86 n ABS DC C
2383 DC 654L GLATT n ABS DC C
311 SF 0711 W-200 n n n ABS UNI C
312 SF 1047 W-200 n ABS UNI C
312 SF 1047 W-87 n ABS UNI C
313 SF 388E W-200 n n n ABS UNI C
315 SF 5026 W-200 n ABS UNI C
323 SF 482B P7166 n ABS UNI C
324 SF 169C W-87 n n ABS UNI C
324 SF 169C W-200 n n n ABS UNI C
326 SF 5854 GLATT n ABS UNI C
326 SF 5854 W-87 n n ABS UNI C
326 SF 5854 W-200 n n n ABS UNI C
335 SF 0184 W-200 n ABS UNI C
341 SF 0110 W-101 n n ABS UNI C
341 SF 0110 W-102 n ABS UNI C
341 SF 0110 W-86 n ABS UNI C
341 SF 0110 W-200 n n n n n ABS UNI C
341 SF 0110 GLATT n n n ABS UNI C
341 SF 0110 W-105 n n n ABS UNI C
343 SF 6211 W-200 n n ABS UNI C
343 SF 6211 W-87 n n n ABS UNI C
351 SF 1878 GLATT n n ABS UNI C
351 SF 1878 W-200 n n n n ABS UNI C
351 SF 1878 W-101 n n n ABS UNI C
351 SF 1878 W-87 n n n n ABS UNI C
351 SF 1878 W-224 n n ABS UNI C
352 SF 6107 W-200 n ABS UNI C
238
262
244
244
244
263
256
261
261
268
265
265
252
252
250
262
238
238
238
241
243
242
240
240
243
243
243
236
236
236
236
236
236
236
244
244
240
240
240
240
240
244
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
353 SF 0547 W-200 n n n ABS UNI C
357 SF 3311 W-200 n n n ABS UNI C
357 SF 3311 W-87 n n n n ABS UNI C
380 SF 1330 W-200 n n n ABS UNI C
431 SF 0284 W-200 n ABS UNI C
446 SF 447C W-200 n n ABS UNI C
448 SF 0650 W-200 n ABS UNI C
451 SF 261D W-200 n n ABS UNI C
452 SF 221A W-200 n ABS UNI C
453 SF 6119 W-200 n n ABS UNI C
461 SF 015B W-200 n ABS UNI C
462 SF 6267 W-200 n ABS UNI C
462 SF 6267 W-86 n n n ABS UNI C
465 SF 404C W-200 n n ABS UNI C
465 SF 404C W-87 n n ABS UNI C
510 SF 1086 W-87 n n ABS UNI C
510 SF 1086 W-200 n n n ABS UNI C
513 SF 5395 W-87 n n ABS UNI C
513 SF 5395 W-200 n n n n n ABS UNI C
6012 DC 18L6 W-87 n n n n ABS DC C
6197 DC 7422 GLATT n n n ABS DC C
6312 DC 535N W-200 n n ABS DC C
6436 DC 435K GLATT n ABS DC E
6447 DC 8021 W-88 n n n ABS DC C
6447 DC 8021 W-200 n n ABS DC C
6453 DC 677N W-88 n n ABS DC C
6456 DC 703Q W-86 n ABS DC C
6456 DC 703Q W-200 n ABS DC C
6456 DC 703Q W-87 n n n ABS DC C
6456 DC 703Q W-88 n n n ABS DC C
6457 DC 450V W-86 n n ABS DC C
6459 DC 021K W-88 n n ABS DC C
6460 DC 727L W-200 n n ABS DC C
6461 DC 188U W-86 n ABS DC C
6474 DC 959N W-87 n ABS DC C
6733 DC 363V W-86 n n ABS DC C
6733 DC 363V W-87 n ABS DC C
6801 DC 099V W-105 n ABS DC C
6801 DC 099V W-86 n n n ABS DC C
6830 DC 535N W-200 n n ABS DC C
6835 DC 8642 W-88 n n ABS DC C
6835 DC 8642 W-86 n n n ABS DC C
237
241
241
239
237
242
238
240
240
244
236
244
244
241
241
239
239
243
243
253
266
261
258
267
267
263
265
265
265
265
259
250
266
253
271
257
257
251
251
261
268
268
F
68 69unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
FinsaPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
008 DC 083V P7166 n ABS DC C
010 SF 4693 W-87 n n ABS UNI C
010 SF 4693 W-101 n n n ABS UNI C
010 SF 4693 W-200 n n n n ABS UNI C
010 SF 4693 GLATT n n n n ABS UNI C
010 SF 4693 W-86 n n n n ABS UNI C
010 SF 4693 W-88 n n ABS UNI C
015 SF 6444 W-200 n n n ABS UNI C
015 SF 6444 GLATT n n ABS UNI C
020 SF 6346 W-200 n n n n n ABS UNI C
020 SF 6346 GLATT n n n n n ABS UNI C
020 SF 6346 W-101 n n n ABS UNI C
020 SF 6346 W-87 n n n ABS UNI C
020 SF 6346 W-105 n n n n ABS UNI C
020 SF 6346 W-102 n n n ABS UNI C
020 SF 6346 W-224 n n ABS UNI C
023 SF 580D W-87 n n n ABS UNI C
02C DC 308Y W-86 n n ABS DC C
030 SF 4693 W-87 n n ABS UNI C
030 SF 4693 W-101 n n n ABS UNI C
030 SF 4693 W-200 n n n n ABS UNI C
030 SF 4693 GLATT n n n n ABS UNI C
030 SF 4693 W-86 n n n n ABS UNI C
030 SF 4693 W-88 n n ABS UNI C
033 DC 13L8 W-86 n n n ABS DC C
036 DC 253U W-88 n n ABS DC C
036 DC 253U W-105 n n n ABS DC C
03C DC 422H W-88 n ABS DC C
040 SF 091E W-86 n n n ABS UNI C
060 SF 4693 W-87 n n ABS UNI C
060 SF 4693 W-101 n n n ABS UNI C
060 SF 4693 W-200 n n n n ABS UNI C
060 SF 4693 GLATT n n n n ABS UNI C
060 SF 4693 W-86 n n n n ABS UNI C
060 SF 4693 W-88 n n ABS UNI C
073 DC 999J W-105 n n ABS DC C
073 DC 999J W-87 n ABS DC C
08F SF 680A W-200 n n n ABS UNI C
091 DC 958X GLATT n n ABS DC C
091 DC 958X P7145 n n ABS DC C
09A DC 6968 W-105 n n ABS DC C
09A DC 6968 W-87 n ABS DC C
251
242
242
242
242
242
242
245
245
244
244
244
244
244
244
244
243
255
242
242
242
242
242
242
252
254
254
258
238
242
242
242
242
242
242
272
272
245
271
271
264
264
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
6851 DC 954M W-105 n n ABS DC C
6851 DC 954M W-200 n ABS DC C
6851 DC 954M W-87 n n n n ABS DC C
6852 DC 439M GLATT n n n ABS DC C
6899 DC 179K W-105 n n n ABS DC C
6909 DC 958X GLATT n n ABS DC C
6909 DC 958X P7145 n n ABS DC C
6917 DC 506W W-105 n ABS DC C
6930 DC 958X GLATT n n ABS DC C
6930 DC 958X P7145 n n ABS DC C
6977 DC 584J W-200 n ABS DC C
7001 DC 396N W-86 n ABS DC C
7002 DC 7422 GLATT n n n ABS DC C
7004 DC 708N W-200 n ABS DC C
7004 DC 708N W-87 n n n n ABS DC C
7008 DC 535N W-200 n n ABS DC C
7014 DC 694L W-200 n ABS DC C
7017 DC 728L W-200 n n ABS DC C
7025 DC 10L1 W-87 n n n ABS DC C
7030 DC 7871 W-200 n ABS DC C
7035 DC 7422 GLATT n n n ABS DC C
7057 DC 283P GLATT n n ABS DC C
8024 DC 608Y W-224 n n n ABS DC C
8066 DC 35L0 W-111 n n ABS DC E
8229 DC 364P W-86 n n ABS DC C
8230 DC 253U W-88 n n ABS DC C
8230 DC 253U W-105 n n n ABS DC C
8231 DC 913P GLATT n ABS DC C
8231 DC 913P W-86 n n n n ABS DC C
8389 DC 785J W-104 n n ABS DC C
8505 DC 694L W-200 n ABS DC C
8506 DC 7008 W-88 n n n ABS DC C
8506 DC 7008 W-87 n n ABS DC C
8714 DC 8176 W-88 n ABS DC C
8807 DC 580M W-87 n n ABS DC C
271
271
271
258
253
271
271
260
271
271
261
258
266
265
265
261
264
266
251
267
266
255
262
257
257
254
254
270
270
267
264
265
265
268
261
FantoniFinsa
F
70 71unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Finsa
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
09A DC 6968 W-86 n n ABS DC C
09F SF 0179 W-200 n n n ABS UNI C
09F SF 0179 W-87 n n n n ABS UNI C
10C DC 352Q W-88 n n ABS DC C
10C DC 352Q W-200 n ABS DC C
11C SF 5373 W-200 n n n ABS UNI C
124 SF 498E W-200 n ABS UNI C
127 SF 511A W-200 n n ABS UNI C
12C SF 336C W-200 n n n ABS UNI C
131 SF 5991 W-200 n ABS UNI C
132 SF 482B P7166 n ABS UNI C
13C SF 207C W-200 n n n ABS UNI C
14C SF 6267 W-200 n ABS UNI C
14C SF 6267 W-86 n n n ABS UNI C
14G DC 276W W-200 n n ABS DC C
160 SF 6107 W-200 n ABS UNI C
161 SF 5991 W-200 n ABS UNI C
164 SF 1086 W-87 n n ABS UNI C
164 SF 1086 W-200 n n n ABS UNI C
16C DC 608Y W-224 n n n ABS DC C
172 SF 447C W-200 n n ABS UNI C
174 SF 1878 GLATT n n ABS UNI C
174 SF 1878 W-200 n n n n ABS UNI C
174 SF 1878 W-101 n n n ABS UNI C
174 SF 1878 W-87 n n n n ABS UNI C
174 SF 1878 W-224 n n ABS UNI C
17B DC 364P W-86 n n ABS DC C
17G DC 597H W-111 n n n n ABS DC E
183 SF 6403 W-200 n n n n ABS UNI C
185 SF 1047 W-200 n ABS UNI C
185 SF 1047 W-87 n ABS UNI C
188 SF 4678 W-200 n n ABS UNI C
192 SF 3311 W-200 n n n ABS UNI C
192 SF 3311 W-87 n n n n ABS UNI C
194 SF 1196 W-200 n ABS UNI C
195 SF 437E W-200 n n ABS UNI C
195 SF 437E W-86 n n n ABS UNI C
197 SF 2109 W-200 n ABS UNI C
204 SF 0547 W-200 n n n ABS UNI C
206 SF 3311 W-200 n n n ABS UNI C
206 SF 3311 W-87 n n n n ABS UNI C
209 DC 703Q W-86 n ABS DC C
264
236
236
256
256
243
242
243
241
244
242
240
244
244
255
244
244
239
239
262
242
240
240
240
240
240
257
262
244
238
238
242
241
241
239
242
242
240
237
241
241
265
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
209 DC 703Q W-200 n ABS DC C
209 DC 703Q W-87 n n n ABS DC C
209 DC 703Q W-88 n n n ABS DC C
20B DC 12L8 W-86 n n ABS DC C
211 SF 1138 W-200 n n n ABS UNI C
21C SF 6444 W-200 n n n ABS UNI C
21C SF 6444 GLATT n n ABS UNI C
21E DC 12L8 W-86 n n ABS DC C
222 DC 8021 W-88 n n n ABS DC C
222 DC 8021 W-200 n n ABS DC C
223 DC 708N W-200 n ABS DC C
223 DC 708N W-87 n n n n ABS DC C
22E DC 822W W-86 n n n ABS DC C
22G SF 556B W-87 n n n ABS UNI C
231 SF 0110 W-101 n n ABS UNI C
231 SF 0110 W-102 n ABS UNI C
231 SF 0110 W-86 n ABS UNI C
231 SF 0110 W-200 n n n n n ABS UNI C
231 SF 0110 GLATT n n n ABS UNI C
231 SF 0110 W-105 n n n ABS UNI C
23B DC 276W W-200 n n ABS DC C
248 SF 386A W-200 n n ABS UNI C
24D DC 17L9 W-88 n ABS DC C
24D DC 17L9 W-87 n ABS DC C
24D DC 17L9 W-86 n n n ABS DC C
25B DC 18L8 GLATT n n n n ABS DC C
25D DC 55L4 W-86 n n ABS DC C
26G SF 286E W-86 n n n ABS UNI C
27G SF 1067 W-200 n n n ABS UNI C
284 SF 6107 W-200 n ABS UNI C
28A DC 064J W-200 n ABS DC C
28G SF 261D W-200 n n ABS UNI C
29E DC 595N W-111 n ABS DC E
29E DC 595N W-200 n ABS DC E
303 DC 797K W-200 n n ABS DC E
303 DC 797K W-86 n ABS DC E
307 DC 665N W-87 n ABS DC C
316 DC 216J W-87 n n ABS DC C
319 DC 13L8 W-86 n n n ABS DC C
31D DC 31L6 W-111 n n n n ABS DC E
32A DC 517J W-87 n n ABS DC C
32A DC 517J W-200 n ABS DC C
265
265
265
252
239
245
245
252
267
267
265
265
268
243
236
236
236
236
236
236
255
241
253
253
253
253
261
240
238
244
251
240
262
262
267
267
263
254
252
256
260
260
F
72 73unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Finsa
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
32G SF 234A W-200 n ABS UNI C
33F DC 375Y W-200 n ABS DC C
33G SF 070B W-200 n ABS UNI C
34C DC 204J W-105 n ABS DC C
34C DC 204J W-224 n n n n ABS DC C
34G SF 5908 W-200 n n n ABS UNI C
358 DC 958X GLATT n n ABS DC C
358 DC 958X P7145 n n ABS DC C
358 DC 099V W-105 n ABS DC C
358 DC 099V W-86 n n n ABS DC C
35D DC 952P W-200 n n n n n ABS DC E
35G DC 845Q W-200 n n n ABS DC C
366 DC 165J W-200 n ABS DC C
36G DC 459H W-200 n ABS DC C
36G DC 459H W-88 n n ABS DC C
375 DC 103V W-86 n ABS DC C
375 DC 103V W-88 n n n ABS DC C
37E DC 337W W-105 n ABS DC C
37E DC 337W W-86 n n n ABS DC C
383 DC 396N W-86 n ABS DC C
38G DC 999J W-105 n n ABS DC C
38G DC 999J W-87 n ABS DC C
399 DC 728L W-200 n n ABS DC C
39G DC 904X W-105 n n ABS DC C
41G DC 099V W-105 n ABS DC C
41G DC 099V W-86 n n n ABS DC C
42B DC 099V W-105 n ABS DC C
42B DC 099V W-86 n n n ABS DC C
435 DC 694L W-200 n ABS DC C
43G DC 09J7 W-86 n ABS DC E
45A DC 316N W-200 n ABS DC C
45A DC 316N W-87 n n ABS DC C
47B DC 6629 W-86 n n n ABS DC C
47B DC 6629 P7145 n n n ABS DC C
47B DC 6629 GLATT n n n ABS DC C
49D DC 066L W-200 n n ABS DC C
50D DC 702M W-86 n n n ABS DC C
512 DC 959N W-87 n ABS DC C
52A DC 10K0 W-105 n n ABS DC C
54A SF 0188 W-200 n ABS UNI C
54C SF 169C W-87 n n ABS UNI C
54C SF 169C W-200 n n n ABS UNI C
240
257
238
254
254
243
271
271
251
251
271
268
252
259
259
251
251
256
256
258
272
272
266
270
251
251
251
251
264
251
256
256
263
263
263
251
265
271
251
236
240
240
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
55C SF 5847 W-200 n n n ABS UNI C
57F DC 361H W-106 n ABS DC C
57F DC 361H GLATT n n n ABS DC C
602 DC 58L2 P7170 n ABS DC C
604 DC 204J W-105 n ABS DC C
604 DC 204J W-224 n n n n ABS DC C
606 DC 7977 W-105 n n n ABS DC C
609 DC 204J W-105 n ABS DC C
609 DC 204J W-224 n n n n ABS DC C
63C SF 1167 W-200 n ABS UNI C
644 DC 784J W-104 n ABS DC C
644 DC 784J W-88 n ABS DC C
65B SF 6287 W-200 n ABS UNI C
66F DC 800Q W-105 n ABS DC C
66F DC 800Q W-200 n n n ABS DC C
671 DC 298J W-105 n ABS DC C
69A DC 31J4 W-105 n ABS DC C
69A DC 31J4 W-86 n n ABS DC C
708 DC 727L W-200 n n ABS DC C
717 DC 7876 W-200 n n ABS DC C
71A SF 0711 W-200 n n n ABS UNI C
71F DC 09J7 W-86 n ABS DC E
721 DC 845Q W-200 n n n ABS DC C
722 DC 316N W-200 n ABS DC C
722 DC 316N W-87 n n ABS DC C
72A DC 099V W-105 n ABS DC C
72A DC 099V W-86 n n n ABS DC C
72E DC 502L GLATT n n n ABS DC E
73D DC 246K W-200 n n ABS DC C
73D DC 246K W-87 n ABS DC C
741 DC 694L W-200 n ABS DC C
766 DC 665N W-87 n ABS DC C
76A DC 281P GLATT n ABS DC C
77C DC 356Q GLATT n ABS DC C
78E SF 5151 W-200 n n ABS UNI C
78E SF 5151 GLATT n n n ABS UNI C
78E SF 5151 W-87 n n n ABS UNI C
81A SF 6346 W-200 n n n n n ABS UNI C
81A SF 6346 GLATT n n n n n ABS UNI C
81A SF 6346 W-101 n n n ABS UNI C
81A SF 6346 W-87 n n n ABS UNI C
81A SF 6346 W-105 n n n n ABS UNI C
243
257
257
261
254
254
267
254
254
239
267
267
244
267
267
255
256
256
266
267
238
251
268
256
256
251
251
260
254
254
264
263
255
257
243
243
243
244
244
244
244
244
F
75
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation74 unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
81A SF 6346 W-102 n n n ABS UNI C
81A SF 6346 W-224 n n ABS UNI C
889 DC 8166 W-200 n n ABS DC C
88D SF 288B W-200 n n ABS UNI C
890 DC 8580 GLATT n ABS DC E
890 DC 8580 W-200 n ABS DC E
910 DC 785J W-104 n n ABS DC C
91B DC 12L0 W-79 n ABS DC E
91B DC 12L0 W-86 n ABS DC C
91B DC 12L0 W-86 n ABS DC E
91B DC 12L0 W-86 n n ABS DC E
93B SF 311D W-200 n n n ABS UNI C
93F SF 0436 W-200 n n ABS UNI C
94B DC 281P GLATT n ABS DC C
95B SF 404C W-200 n n ABS UNI C
95B SF 404C W-87 n n ABS UNI C
98B DC 203X W-102 n n n ABS DC E
U12 SF 1878 GLATT n n ABS UNI C
U12 SF 1878 W-200 n n n n ABS UNI C
U12 SF 1878 W-101 n n n ABS UNI C
U12 SF 1878 W-87 n n n n ABS UNI C
U12 SF 1878 W-224 n n ABS UNI C
FinsaFormica
244
244
268
241
268
268
267
252
252
252
252
241
237
255
241
241
254
240
240
240
240
240
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0363 DC 242U W-200 n ABS DC E
3401 SF 1082 W-200 n n ABS UNI C
4892 DC 502L GLATT n n n ABS DC E
4896 DC 18P8 GLATT n n ABS ALU-Folie P
6456 DC 580M W-87 n n ABS DC C
6457 DC 8166 W-200 n n ABS DC C
6458 DC 954M W-105 n n ABS DC C
6458 DC 954M W-200 n ABS DC C
6458 DC 954M W-87 n n n n ABS DC C
6459 DC 861U W-200 n n n ABS DC C
6460 DC 569P W-87 n n ABS DC C
6460 DC 569P W-200 n ABS DC C
6462 DC 355Q GLATT n n ABS DC C
6463 SF 6346 W-200 n n n n n ABS UNI C
6463 SF 6346 GLATT n n n n n ABS UNI C
6463 SF 6346 W-101 n n n ABS UNI C
6463 SF 6346 W-87 n n n ABS UNI C
6463 SF 6346 W-105 n n n n ABS UNI C
6463 SF 6346 W-102 n n n ABS UNI C
6463 SF 6346 W-224 n n ABS UNI C
6464 SF 091E W-86 n n n ABS UNI C
6466 SF 1878 GLATT n n ABS UNI C
6466 SF 1878 W-200 n n n n ABS UNI C
6466 SF 1878 W-101 n n n ABS UNI C
6466 SF 1878 W-87 n n n n ABS UNI C
6466 SF 1878 W-224 n n ABS UNI C
6468 SF 0110 W-101 n n ABS UNI C
6468 SF 0110 W-102 n ABS UNI C
6468 SF 0110 W-86 n ABS UNI C
6468 DC 319V GLATT n n n ABS HG P
6468 SF 0110 W-200 n n n n n ABS UNI C
6468 SF 0110 GLATT n n n ABS UNI C
6468 SF 0110 W-105 n n n ABS UNI C
6469 SF 5847 W-200 n n n ABS UNI C
6470 SF 0597 W-200 n n ABS UNI C
7884 DC 38R4 GLATT n 3D 3D 2in1 P
8100 DC 498V GLATT n n n ABS HG P
8612 DC 6522 W-104 n ABS DC C
F0231 SF 864A W-87 n n n ABS UNI C
F0232 DC 23R8 GLATT n 3D 3D 2in1 P
F0232 DC 951Y GLATT n ABS HG P
F0329 DC 535N W-200 n n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
Formica
254
238
260
228
261
268
271
271
271
268
261
261
257
244
244
244
244
244
244
244
238
240
240
240
240
240
236
236
236
229
236
236
236
243
237
223
230
262
246
222
232
261
F
77
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation76 unverbindliche Empfehlung | non-binding recommendation
Formica
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F0414 SF 386A W-200 n n ABS UNI C
F0976 DC 25R2 GLATT n 3D 3D 2in1 P
F0976 DC 31L5 GLATT n n ABS HG P
F1003 SF 6346 W-200 n n n n n ABS UNI C
F1003 SF 6346 GLATT n n n n n ABS UNI C
F1003 SF 6346 W-101 n n n ABS UNI C
F1003 SF 6346 W-87 n n n ABS UNI C
F1003 SF 6346 W-105 n n n n ABS UNI C
F1003 SF 6346 W-102 n n n ABS UNI C
F1003 SF 6346 W-224 n n ABS UNI C
F1079 DC 913P GLATT n ABS DC C
F1079 DC 913P W-86 n n n n ABS DC C
F1143 DC 185L W-86 n n ABS DC C
F1147 DC 359J W-88 n ABS DC C
F1147 DC 359J W-87 n ABS DC C
F1170 DC 24R7 GLATT n 3D 3D 2in1 P
F1170 DC 325X GLATT n n ABS HG P
F1293 DC 630K W-87 n ABS DC C
F1297 DC 6522 W-104 n ABS DC C
F1485 DC 481V GLATT n ABS HG P
F1614 DC 363V W-86 n n ABS DC C
F1614 DC 363V W-87 n ABS DC C
F1813 SF 6107 W-200 n ABS UNI C
F1942 SF 5395 W-87 n n ABS UNI C
F1942 SF 5395 W-200 n n n n n ABS UNI C
F2200 DC 24R4 GLATT n 3D 3D 2in1 P
F2200 DC 949Y GLATT n ABS HG P
F2253 SF 0110 W-101 n n ABS UNI C
F2253 SF 0110 W-102 n ABS UNI C
F2253 SF 0110 W-86 n ABS UNI C
F2253 SF 0110 W-200 n n n n n ABS UNI C
F2253 SF 0110 GLATT n n n ABS UNI C
F2253 SF 0110 W-105 n n n ABS UNI C
F2253 DC 707H W-79 n n ABS DC E
F2255 SF 6444 W-200 n n n ABS UNI C
F2255 SF 6444 GLATT n n ABS UNI C
F2273 SF 6414 W-200 n n n ABS UNI C
F2274 SF 6444 W-200 n n n ABS UNI C
F2274 SF 6444 GLATT n n ABS UNI C
F2296 SF 5854 GLATT n ABS UNI C
F2296 SF 5854 W-87 n n ABS UNI C
F2296 SF 5854 W-200 n n n ABS UNI C
241
222
229
244
244
244
244
244
244
244
270
270
253
257
257
222
229
262
262
229
257
257
244
243
243
222
232
236
236
236
236
236
236
265
245
245
245
245
245
243
243
243
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F2297 SF 5992 W-200 n n n n n ABS UNI C
F2297 SF 5992 W-224 n n ABS UNI C
F2497 DC 8437 W-200 n n n ABS DC C
F2510 DC 784J W-104 n ABS DC C
F2510 DC 784J W-88 n ABS DC C
F2726 DC 8978 W-88 n ABS DC C
F2726 DC 8978 W-87 n ABS DC C
F2731 DC 6629 W-86 n n n ABS DC C
F2731 DC 6629 P7145 n n n ABS DC C
F2731 DC 6629 GLATT n n n ABS DC C
F2824 DC 35R0 GLATT n 3D 3D 2in1 P
F2828 DC 37R6 GLATT n 3D 3D 2in1 P
F2884 DC 878H W-200 n n ABS DC C
F2962 SF 578D W-87 n n n ABS UNI C
F2962 DC 702H GLATT n ABS HG P
F2966 SF 5026 W-200 n ABS UNI C
F2985 DC 18L6 W-87 n n n n ABS DC C
F3091 DC 19R8 GLATT n 3D 3D 2in1 P
F3091 DC 498V GLATT n n n ABS HG P
F3091 DC 154W GLATT n ABS HG P
F3188 DC 061J GLATT n ABS DC C
F3395 DC 188U W-86 n ABS DC C
F3400 SF 4861 W-101 n n n ABS UNI C
F3400 SF 4861 W-200 n n n ABS UNI C
F3420 AB DC 29U6 GLATT n ABS Digital P
F3421 AET DC 29U7 W-86 n ABS Digital P
F3422 RAD DC 28U9 W-200 n ABS Digital P
F3424 RAD DC 29U9 W-200 n ABS Digital P
F3425 RAD DC 29U4 W-200 n ABS Digital P
F3426 RAD DC 29U8 W-200 n ABS Digital P
F3457 AR+ DC 07U9 GLATT n ABS Digital P
F3458 MAT DC 29U1 W-103 n ABS Digital P
F3459 AR+ DC 07U8 GLATT n ABS Digital P
F3460 AR+ DC 07U7 GLATT n ABS Digital P
F3460 NDF DC 81Q2 GLATT n ABS Digital P
F3461 AR+ DC 08U0 GLATT n ABS Digital P
F3462 DC 67U9 W-242 n PP Digital P
F3465 RAD DC 49Q7 W-200 n ABS Digital P
F3466 RAD DC 49Q8 W-200 n ABS Digital P
F3467 RAD DC 82Q0 W-200 n ABS Digital P
F3475 AET DC 29U3 W-86 n ABS Digital P
F3476 AET DC 29U5 W-86 n ABS Digital P
244
244
268
267
267
270
270
263
263
263
223
223
269
243
231
243
253
222
230
228
250
253
242
242
276
276
276
276
276
276
276
276
276
276
276
276
276
276
276
276
276
276
F
78 79unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Formica
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F3478 RAD DC 29U0 W-200 n ABS Digital P
F3699 DC 251V GLATT n n ABS DC C
F3855 DC 703Q W-86 n ABS DC C
F3855 DC 703Q W-200 n ABS DC C
F3855 DC 703Q W-87 n n n ABS DC C
F3855 DC 703Q W-88 n n n ABS DC C
F4177 DC 23R6 GLATT n 3D 3D 2in1 P
F4177 SF 580D W-87 n n n ABS UNI C
F4400 DC 216J W-87 n n ABS DC C
F4403 DC 8150 W-88 n ABS DC C
F4406 DC 037J W-88 n ABS DC C
F4406 DC 037J GLATT n ABS DC C
F4524 DC 580M W-87 n n ABS DC C
F4525 DC 727L W-200 n n ABS DC C
F5087 DC 7099 W-200 n n ABS DC E
F5147 DC 388U W-200 n ABS DC C
F5147 DC 388U W-87 n n n n ABS DC C
F5161 DC 679K W-200 n ABS DC C
F5161 DC 679K P7145 n n ABS DC C
F516409 DC 797K W-200 n n ABS DC E
F516409 DC 797K W-86 n ABS DC E
F516494 DC 435K GLATT n ABS DC E
F5167 DC 569P W-87 n n ABS DC C
F5167 DC 569P W-200 n ABS DC C
F5343 SF 286E W-86 n n n ABS UNI C
F5375 DC 473X W-111 n n ABS DC E
F5376 DC 04L4 W-111 n n n ABS DC E
F5378 DC 556H W-111 n ABS DC E
F5379 DC 191Q W-200 n ABS DC C
F5380 DC 185J W-87 n n ABS DC C
F5380 DC 185J W-88 n n n ABS DC C
F5381 DC 791V W-105 n ABS DC C
F5381 DC 791V W-86 n n n n ABS DC C
F5486 DC 27K7 W-111 n ABS DC E
F5494 SF 5026 W-200 n ABS UNI C
F6890 DC 7977 W-105 n n n ABS DC C
F6901 DC 35R2 GLATT n 3D 3D 2in1 P
F6903 DC 24R1 GLATT n 3D 3D 2in1 P
F6903 DC 952Y GLATT n ABS HG P
F6905 SF 680A W-200 n n n ABS UNI C
F6932 DC 388U W-200 n ABS DC C
F6932 DC 388U W-87 n n n n ABS DC C
276
254
265
265
265
265
222
243
254
267
250
250
261
266
265
257
257
264
264
267
267
258
261
261
240
260
250
261
253
253
253
267
267
255
243
267
223
222
232
245
257
257
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F7515 DC 7099 W-200 n n ABS DC E
F7617 DC 216J W-87 n n ABS DC C
F7845 SF 447C W-200 n n ABS UNI C
F7851 SF 0436 W-200 n n ABS UNI C
F7851 DC 37R6 GLATT n 3D 3D 2in1 P
F7858 DC 32R1 GLATT n 3D 3D 2in1 P
F7858 DC 286H GLATT n ABS HG P
F7882 SF 0707 W-200 n ABS UNI C
F7882 SF 0707 W-86 n n n ABS UNI C
F7884 SF 119A W-200 n ABS UNI C
F7884 DC 31R5 GLATT n 3D 3D 2in1 P
F7895 SF 0189 W-200 n ABS UNI C
F7912 DC 35R1 GLATT n 3D 3D 2in1 P
F7912 DC 950Y GLATT n ABS HG P
F7914 DC 61R7 GLATT n 3D 3D 2in1 P
F7927 DC 25R0 GLATT n 3D 3D 2in1 P
F7927 SF 6241 W-101 n n ABS UNI C
F7927 DC 31L2 GLATT n ABS HG P
F7927 SF 6241 W-200 n n n ABS UNI C
F7928 SF 0179 W-200 n n n ABS UNI C
F7928 SF 0179 W-87 n n n n ABS UNI C
F7932 DC 23R5 GLATT n 3D 3D 2in1 P
F7932 SF 6214 W-200 n n ABS UNI C
F7932 DC 529Y GLATT n ABS HG P
F7934 DC 23R5 GLATT n 3D 3D 2in1 P
F7938 SF 6241 W-101 n n ABS UNI C
F7938 SF 6241 W-200 n n n ABS UNI C
F7949 SF 4693 W-87 n n ABS UNI C
F7949 SF 4693 W-101 n n n ABS UNI C
F7949 SF 4693 W-200 n n n n ABS UNI C
F7949 SF 4693 GLATT n n n n ABS UNI C
F7949 SF 4693 W-86 n n n n ABS UNI C
F7949 SF 4693 W-88 n n ABS UNI C
F7949 DC 706H W-79 n n n ABS DC E
F7961 SF 6211 W-200 n n ABS UNI C
F7961 SF 6211 W-87 n n n ABS UNI C
F7966 SF 1086 W-87 n n ABS UNI C
F7966 SF 1086 W-200 n n n ABS UNI C
F7966 DC 24R2 GLATT n 3D 3D 2in1 P
F7966 DC 105W GLATT n ABS HG P
F8061 DC 6635 W-88 n n ABS DC C
F8100 SF 6346 W-200 n n n n n ABS UNI C
265
254
242
237
223
223
229
238
238
239
223
237
223
232
223
222
244
229
244
236
236
222
244
230
222
244
244
242
242
242
242
242
242
265
244
244
239
239
222
228
263
244
F
81
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation80 unverbindliche Empfehlung | non-binding recommendation
Formica
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F8100 SF 6346 GLATT n n n n n ABS UNI C
F8100 SF 6346 W-101 n n n ABS UNI C
F8100 SF 6346 W-87 n n n ABS UNI C
F8100 SF 6346 W-105 n n n n ABS UNI C
F8100 SF 6346 W-102 n n n ABS UNI C
F8100 SF 6346 W-224 n n ABS UNI C
F8101 SF 0110 W-101 n n ABS UNI C
F8101 SF 0110 W-102 n ABS UNI C
F8101 SF 0110 W-86 n ABS UNI C
F8101 SF 0110 W-200 n n n n n ABS UNI C
F8101 SF 0110 GLATT n n n ABS UNI C
F8101 SF 0110 W-105 n n n ABS UNI C
F8172 SF 6082 W-200 n n ABS UNI C
F8750 SF 076C W-200 n ABS UNI C
F8751 SF 066D W-200 n ABS UNI C
F8752 SF 1086 W-87 n n ABS UNI C
F8752 SF 1086 W-200 n n n ABS UNI C
F8755 SF 169C W-87 n n ABS UNI C
F8755 SF 169C W-200 n n n ABS UNI C
F8758 SF 288B W-200 n n ABS UNI C
F8760 SF 221A W-200 n ABS UNI C
F8761 SF 1153 W-200 n ABS UNI C
F8762 SF 0711 W-200 n n n ABS UNI C
F8763 SF 1878 GLATT n n ABS UNI C
F8763 SF 1878 W-200 n n n n ABS UNI C
F8763 SF 1878 W-101 n n n ABS UNI C
F8763 SF 1878 W-87 n n n n ABS UNI C
F8763 SF 1878 W-224 n n ABS UNI C
F8766 DC 8525 W-200 n n n n n ABS DC E
F8767 DC 502L GLATT n n n ABS DC E
F8920 DC 298J W-105 n ABS DC C
F8921 DC 083V P7166 n ABS DC C
F8922 DC 8631 W-88 n n n n ABS DC C
F8924 DC 067U W-200 n n ABS DC C
F8925 DC 958X GLATT n n ABS DC C
F8925 DC 958X P7145 n n ABS DC C
F8926 DC 459H W-200 n ABS DC C
F8926 DC 459H W-88 n n ABS DC C
F8927 DC 216J W-87 n n ABS DC C
F8928 DC 999J W-105 n n ABS DC C
F8928 DC 999J W-87 n ABS DC C
F8929 DC 694L W-200 n ABS DC C
244
244
244
244
244
244
236
236
236
236
236
236
244
238
238
239
239
240
240
241
240
239
238
240
240
240
240
240
268
260
255
251
268
251
271
271
259
259
254
272
272
264
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F8931 DC 138V W-200 n n n ABS DC C
F8931 DC 138V P7145 n n n ABS DC C
F8934 DC 7876 W-200 n n ABS DC C
F8935 DC 913L W-87 n n n ABS DC C
F8937 DC 55L4 W-86 n n ABS DC C
F8940 DC 6629 W-86 n n n ABS DC C
F8940 DC 6629 P7145 n n n ABS DC C
F8940 DC 6629 GLATT n n n ABS DC C
F8942 DC 629N W-87 n ABS DC E
F8942 DC 629N W-105 n ABS DC C
F8942 DC 629N W-111 n n n ABS DC E
F8943 DC 203X W-102 n n n ABS DC E
F8946 DC 185L W-86 n n ABS DC C
F8949 DC 185L W-86 n n ABS DC C
F8951 DC 700R GLATT n n n 3D 3D P
F8961 DC 440U W-87 n ABS DC C
F8963 DC 450V W-86 n n ABS DC C
F8965 SF 1196 W-200 n ABS UNI C
F9011 DC 251V GLATT n n ABS DC C
K1040 DC 19R8 GLATT n 3D 3D 2in1 P
K1040 DC 263V GLATT n n n ABS HG P
K1040 SF 6346 W-200 n n n n n ABS UNI C
K1040 SF 6346 GLATT n n n n n ABS UNI C
K1040 SF 6346 W-101 n n n ABS UNI C
K1040 SF 6346 W-87 n n n ABS UNI C
K1040 SF 6346 W-105 n n n n ABS UNI C
K1040 SF 6346 W-102 n n n ABS UNI C
K1040 SF 6346 W-224 n n ABS UNI C
K1097 SF 1082 W-200 n n ABS UNI C
K1181 SF 4989 W-200 n n n ABS UNI C
K1181 SF 4989 W-87 n n n ABS UNI C
K1238 SF 5395 W-87 n n ABS UNI C
K1238 SF 5395 W-200 n n n n n ABS UNI C
K1238 DC 570V GLATT n ABS HG P
K1238 DC 35R0 GLATT n 3D 3D 2in1 P
K1301 SF 6414 W-200 n n n ABS UNI C
K1834 DC 42R6 GLATT n 3D 3D 2in1 P
K1834 DC 287H GLATT n ABS HG P
K1956 SF 6107 W-200 n ABS UNI C
K1962 SF 5854 GLATT n ABS UNI C
K1962 SF 5854 W-87 n n ABS UNI C
K1962 SF 5854 W-200 n n n ABS UNI C
252
252
267
270
261
263
263
263
262
262
262
254
253
253
223
258
259
239
254
222
229
244
244
244
244
244
244
244
238
242
242
243
243
230
223
245
223
229
244
243
243
243
F
82 83
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
FormicaFunder Max/Isovolta
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
K1994 SF 6211 W-200 n n ABS UNI C
K1994 SF 6211 W-87 n n n ABS UNI C
K1997 SF 482B P7166 n ABS UNI C
K2001 SF 1081 W-87 n n n n ABS UNI C
K2005 SF 1086 W-87 n n ABS UNI C
K2005 SF 1086 W-200 n n n ABS UNI C
K2010 SF 1083 W-200 n n ABS UNI C
K2017 SF 750A W-87 n n ABS UNI C
K2020 SF 0222 W-200 n ABS UNI C
K2022 SF 086A W-200 n ABS UNI C
K2046 SF 304D W-87 n n n ABS UNI C
K2081 DC 48R4 GLATT n 3D 3D 2in1 P
K2116 DC 31R4 GLATT n 3D 3D 2in1 P
K3202 SF 922B W-200 n n ABS UNI C
K3209 SF 0188 W-200 n ABS UNI C
K3210 SF 261D W-200 n n ABS UNI C
K3210 DC 24R0 GLATT n 3D 3D 2in1 P
K3210 DC 103W GLATT n ABS HG P
K3216 DC 103W GLATT n ABS HG P
K3236 SF 234A W-200 n ABS UNI C
K6149 DC 6635 W-88 n n ABS DC C
K7016 DC 8172 W-200 n ABS DC C
K7016 DC 8172 W-88 n ABS DC C
K7021 DC 7422 GLATT n n n ABS DC C
K7024 DC 6629 W-86 n n n ABS DC C
K7024 DC 6629 P7145 n n n ABS DC C
K7024 DC 6629 GLATT n n n ABS DC C
K7555 DC 8437 W-200 n n n ABS DC C
K7574 DC 8428 W-200 n n ABS DC C
K7604 DC 8978 W-88 n ABS DC C
K7604 DC 8978 W-87 n ABS DC C
K7647 DC 8166 W-200 n n ABS DC C
M2022 DC 700R GLATT n n n 3D 3D P
M2023 DC 142R GLATT n n n 3D DC P
M2025 DC 145R GLATT n n 3D DC P
M2032 DC 182R GLATT n n n 3D DC P
M2052 DC 144R GLATT n n 3D DC P
244
244
242
238
239
239
238
245
237
238
241
223
223
246
236
240
222
228
228
240
263
268
268
266
263
263
263
268
268
270
270
268
223
252
252
253
252
Döllken-Kanten passend zu | Döllken Edgebands to match
Funder Max /IsovoltaPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0034 DC 185L W-86 n n ABS DC C
0035 DC 58L2 P7170 n ABS DC C
0038 DC 35L0 W-111 n n ABS DC E
0040 DC 692Q W-200 n ABS DC C
0046 DC 65K4 W-111 n n n ABS DC E
0053 SF 017A W-200 n n ABS UNI C
0064 DC 608Y W-224 n n n ABS DC C
0066 SF 5971 W-200 n n n n ABS UNI C
0066 SF 5971 W-224 n n ABS UNI C
0067 SF 1067 W-200 n n n ABS UNI C
0068 SF 539B W-200 n n ABS UNI C
0069 DC 13L8 W-86 n n n ABS DC C
0074 SF 4861 W-101 n n n ABS UNI C
0074 SF 4861 W-200 n n n ABS UNI C
0075 FH SF 0179 W-200 n n n ABS UNI C
0075 DC 51K1 GLATT n ABS HG P
0077 DC 31L5 GLATT n n ABS HG P
0080 SG DC 319V GLATT n n n ABS HG P
0080 DC 19R6 GLATT n 3D 3D 2in1 P
0080 SF 0110 W-101 n n ABS UNI C
0080 SF 0110 W-102 n ABS UNI C
0080 SF 0110 W-86 n ABS UNI C
0080 SF 0110 W-200 n n n n n ABS UNI C
0080 SF 0110 GLATT n n n ABS UNI C
0080 SF 0110 W-105 n n n ABS UNI C
0085 DC 19R8 GLATT n 3D 3D 2in1 P
0085 DC 263V GLATT n n n ABS HG P
0085 SF 6346 W-200 n n n n n ABS UNI C
0085 SF 6346 GLATT n n n n n ABS UNI C
0085 SF 6346 W-101 n n n ABS UNI C
0085 SF 6346 W-87 n n n ABS UNI C
0085 SF 6346 W-105 n n n n ABS UNI C
0085 SF 6346 W-102 n n n ABS UNI C
0085 SF 6346 W-224 n n ABS UNI C
0086 SF 4693 W-87 n n ABS UNI C
0086 SF 4693 W-101 n n n ABS UNI C
0086 SF 4693 W-200 n n n n ABS UNI C
0086 SF 4693 GLATT n n n n ABS UNI C
0086 SF 4693 W-86 n n n n ABS UNI C
0086 SF 4693 W-88 n n ABS UNI C
0094 SF 386A W-200 n n ABS UNI C
0095 DC 24R0 GLATT n 3D 3D 2in1 P
253
261
257
264
262
236
262
244
244
238
243
252
242
242
236
230
229
229
222
236
236
236
236
236
236
222
229
244
244
244
244
244
244
244
242
242
242
242
242
242
241
222
F
85unverbindliche Empfehlung | non-binding recommendation84
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
Funder Max/Isovolta
0095 DC 848U GLATT n ABS HG P
0099 DC 359J W-88 n ABS DC C
0099 DC 359J W-87 n ABS DC C
0102 DC 8021 W-88 n n n ABS DC C
0102 DC 8021 W-200 n n ABS DC C
0104 DC 316N W-200 n ABS DC C
0104 DC 316N W-87 n n ABS DC C
0107 DC 817U W-88 n n ABS DC C
0112 DC 19R8 GLATT n 3D 3D 2in1 P
0112 DC 263V GLATT n n n ABS HG P
0112 SF 6346 W-200 n n n n n ABS UNI C
0112 SF 6346 GLATT n n n n n ABS UNI C
0112 SF 6346 W-101 n n n ABS UNI C
0112 SF 6346 W-87 n n n ABS UNI C
0112 SF 6346 W-105 n n n n ABS UNI C
0112 SF 6346 W-102 n n n ABS UNI C
0112 SF 6346 W-224 n n ABS UNI C
0125 DC 8631 W-88 n n n n ABS DC C
0126 DC 185L W-86 n n ABS DC C
0157 DC 154V W-86 n n n ABS DC C
0157 DC 154V P7145 n n ABS DC C
0165 DC 7008 W-88 n n n ABS DC C
0165 DC 7008 W-87 n n ABS DC C
0166 DC 407L W-105 n ABS DC C
0171 DC 6629 W-86 n n n ABS DC C
0171 DC 6629 P7145 n n n ABS DC C
0171 DC 6629 GLATT n n n ABS DC C
0175 DC 346V W-88 n n ABS DC C
0180 DC 7977 W-105 n n n ABS DC C
0187 DC 8152 W-88 n n ABS DC C
0193 SF 0193 W-200 n n n ABS UNI C
0195 DC 646N P7166 n ABS DC C
0195 DC 646N P7145 n n n ABS DC C
0203 DC 185J W-87 n n ABS DC C
0203 DC 185J W-88 n n n ABS DC C
0210 DC 35R0 GLATT n 3D 3D 2in1 P
0210 DC 570V GLATT n ABS HG P
0210 SF 447C W-200 n n ABS UNI C
0212 FH SF 0180 W-200 n ABS UNI C
0227 DC 8647 W-200 n n n n ABS DC C
0227 DC 8647 W-87 n n n ABS DC C
0230 SF 540E W-200 n n ABS UNI C
231
257
257
267
267
256
256
268
222
229
244
244
244
244
244
244
244
268
253
252
252
265
265
258
263
263
263
256
267
268
237
262
262
253
253
223
230
242
236
269
269
243
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0236 SF 617A W-200 n ABS UNI C
0237 SF 0193 W-200 n n n ABS UNI C
0238 DC 8654 W-200 n ABS DC C
0239 DC 411X W-200 n ABS DC C
0239 DC 411X W-106 n ABS DC C
0250 FH SF 583D W-200 n n ABS UNI C
0250 DC 25R1 GLATT n 3D 3D 2in1 P
0250 DC 274V GLATT n ABS HG P
0263 DC 40J7 GLATT n ABS HG P
0267 DC 388U W-200 n ABS DC C
0267 DC 388U W-87 n n n n ABS DC C
0270 DC 655L GLATT n ABS DC C
0274 SF 617A W-200 n ABS UNI C
0275 DC 7008 W-88 n n n ABS DC C
0275 DC 7008 W-87 n n ABS DC C
0279 SF 5949 W-200 n ABS UNI C
0280 FH SF 1138 W-200 n n n ABS UNI C
0289 DC 887Y GLATT n ABS DC C
0291 DC 138V W-200 n n n ABS DC C
0291 DC 138V P7145 n n n ABS DC C
0302 DC 6629 W-86 n n n ABS DC C
0302 DC 6629 P7145 n n n ABS DC C
0302 DC 6629 GLATT n n n ABS DC C
0305 DC 229J W-87 n ABS DC C
0308 DC 8428 W-200 n n ABS DC C
0315 DC 24R9 GLATT n 3D 3D 2in1 P
0315 SF 756A W-200 n ABS UNI C
0315 DC 552Y GLATT n ABS HG P
0318 SF 335C W-200 n ABS UNI C
0319 DC 42R6 GLATT n 3D 3D 2in1 P
0319 DC 557Y GLATT n ABS HG P
0319 SF 207C W-200 n n n ABS UNI C
0328 DC 8580 GLATT n ABS DC E
0328 DC 8580 W-200 n ABS DC E
0329 DC 498L GLATT n ABS DC E
0329 DC 498L W-101 n ABS DC E
0334 DC 251V GLATT n n ABS DC C
0335 DC 364P W-86 n n ABS DC C
0336 DC 879L W-200 n n ABS DC E
0340 DC 861U W-200 n n n ABS DC C
0374 DC 7099 W-200 n n ABS DC E
0405 DC 845Q W-200 n n n ABS DC C
244
237
269
258
258
243
222
229
229
257
257
262
244
265
265
243
239
269
252
252
263
263
263
254
268
222
245
230
241
223
230
240
268
268
260
260
254
257
269
268
265
268
F
86 87unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Funder Max/Isovolta
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0408 DC 679K W-200 n ABS DC C
0408 DC 679K P7145 n n ABS DC C
0412 DC 80L4 GLATT n ABS HG P
0412 DC 6629 W-86 n n n ABS DC C
0412 DC 6629 P7145 n n n ABS DC C
0412 DC 6629 GLATT n n n ABS DC C
0413 DC 8642 W-88 n n ABS DC C
0413 DC 8642 W-86 n n n ABS DC C
0420 DC 453K W-88 n ABS DC C
0468 DC 8172 W-200 n ABS DC C
0468 DC 8172 W-88 n ABS DC C
0487 DC 6629 W-86 n n n ABS DC C
0487 DC 6629 P7145 n n n ABS DC C
0487 DC 6629 GLATT n n n ABS DC C
0492 DC 563X W-86 n n n n ABS DC E
0500 SF 578D W-87 n n n ABS UNI C
0504 DC 397J W-105 n n ABS DC C
0522 DC 081J P7166 n ABS DC C
0542 DC 6548 W-88 n n n ABS DC C
0544 DC 535N W-200 n n ABS DC C
0563 DC 083V P7166 n ABS DC C
0591 SF 0597 W-200 n n ABS UNI C
0594 SF 061C W-200 n ABS UNI C
0595 SF 436E W-86 n ABS UNI C
0606 SF 091E W-86 n n n ABS UNI C
0619 SF 494A W-200 n ABS UNI C
0624 SF 6119 W-200 n n ABS UNI C
0627 FH SF 5991 W-200 n ABS UNI C
0630 SF 39A1 W-87 n ABS UNI C
0631 SF 750A W-87 n n ABS UNI C
0635 SF 960E W-200 n n n ABS UNI C
0641 SF 388E W-200 n n n ABS UNI C
0648 SF 6267 W-200 n ABS UNI C
0648 SF 6267 W-86 n n n ABS UNI C
0650 SF 04B7 W-87 n ABS UNI C
0651 SF 45B9 W-200 n n ABS UNI C
0657 FH SF 6082 W-200 n n ABS UNI C
0663 SF 617A W-200 n ABS UNI C
0669 SF 0189 W-200 n ABS UNI C
0675 FH SF 194A W-87 n ABS UNI C
0680 SF 612C W-200 n n n ABS UNI C
0681 SF 6346 W-200 n n n n n ABS UNI C
264
264
231
263
263
263
268
268
259
268
268
263
263
263
261
243
258
251
262
261
251
237
238
242
238
242
244
244
241
245
246
241
244
244
237
242
244
244
237
240
244
244
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0681 SF 6346 GLATT n n n n n ABS UNI C
0681 SF 6346 W-101 n n n ABS UNI C
0681 SF 6346 W-87 n n n ABS UNI C
0681 SF 6346 W-105 n n n n ABS UNI C
0681 SF 6346 W-102 n n n ABS UNI C
0681 SF 6346 W-224 n n ABS UNI C
0682 SF 454C W-200 n ABS UNI C
0687 SF 0284 W-200 n ABS UNI C
0691 SF 1086 W-87 n n ABS UNI C
0691 SF 1086 W-200 n n n ABS UNI C
0702 SF 743B W-87 n n n ABS UNI C
0703 FH SF 482E W-200 n n ABS UNI C
0704 SF 5847 W-200 n n n ABS UNI C
0708 SF 666A W-200 n n ABS UNI C
0712 SF 309E W-200 n n n ABS UNI C
0717 SF 130D W-87 n n n ABS UNI C
0718 SF 864A W-87 n n n ABS UNI C
0720 DC 73Q7 W-111 n n ABS DC E
0725 SF 169C W-87 n n ABS UNI C
0725 SF 169C W-200 n n n ABS UNI C
0726 DC 73Q8 W-111 n n ABS DC E
0730 SF 3311 W-200 n n n ABS UNI C
0730 SF 3311 W-87 n n n n ABS UNI C
0733 DC 23R5 GLATT n 3D 3D 2in1 P
0733 SF 6214 W-200 n n ABS UNI C
0736 SF 0188 W-200 n ABS UNI C
0741 SF 1330 W-200 n n n ABS UNI C
0741 DC 32R0 GLATT n 3D 3D 2in1 P
0742 SF 1081 W-87 n n n n ABS UNI C
0743 SF 2319 W-200 n n ABS UNI C
0746 SF 6170 W-200 n n n n ABS UNI C
0747 SF 0222 W-200 n ABS UNI C
0753 SF 2109 W-200 n ABS UNI C
0755 FH SF 100B W-200 n n ABS UNI C
0756 SF 6211 W-200 n n ABS UNI C
0756 SF 6211 W-87 n n n ABS UNI C
0759 SF 0110 W-101 n n ABS UNI C
0759 SF 0110 W-102 n ABS UNI C
0759 SF 0110 W-86 n ABS UNI C
0759 SF 0110 W-200 n n n n n ABS UNI C
0759 SF 0110 GLATT n n n ABS UNI C
0759 SF 0110 W-105 n n n ABS UNI C
244
244
244
244
244
244
242
237
239
239
245
242
243
245
241
239
246
266
240
240
266
241
241
222
244
236
239
223
238
240
244
237
240
238
244
244
236
236
236
236
236
236
F
89
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation88 unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
Funder Max/Isovolta
0760 SF 315E W-200 n n ABS UNI C
0761 SF 158A W-200 n ABS UNI C
0762 SF 6211 W-200 n n ABS UNI C
0762 SF 6211 W-87 n n n ABS UNI C
0822 DC 19L8 W-224 n n n ABS DC C
0851 DC 05U3 GLATT n ABS HG P
0851 DC 23R5 GLATT n 3D 3D 2in1 P
0851 SF 5854 GLATT n ABS UNI C
0851 SF 5854 W-87 n n ABS UNI C
0851 SF 5854 W-200 n n n ABS UNI C
0866 DC 352Q W-88 n n ABS DC C
0866 DC 352Q W-200 n ABS DC C
0867 DC 116V P7166 n n ABS DC C
0867 DC 116V W-200 n ABS DC C
0877 DC 18J9 W-102 n n n ABS DC E
0878 DC 822W W-86 n n n ABS DC C
0895 DC 74Q1 GLATT n n ABS DC E
0905 DC 998V W-105 n ABS DC C
0920 DC 99N0 W-111 n ABS DC E
0921 DC 74Q2 W-111 n n ABS DC E
0933 DC 506W W-105 n ABS DC C
0933 DC 48Q3 W-111 n n ABS DC E
0934 DC 538H W-200 n n ABS DC C
0950 DC 12N0 W-200 n n ABS DC C
0951 DC 8631 W-88 n n n n ABS DC C
0952 DC 191Q W-200 n ABS DC C
1203 SF 1878 GLATT n n ABS UNI C
1203 SF 1878 W-200 n n n n ABS UNI C
1203 SF 1878 W-101 n n n ABS UNI C
1203 SF 1878 W-87 n n n n ABS UNI C
1203 SF 1878 W-224 n n ABS UNI C
1300 DC 6835 W-200 n n ABS DC E
1375 DC 927H W-200 n n ABS DC C
1398 DC 021K W-88 n n ABS DC C
1402 DC 958X GLATT n n ABS DC C
1402 DC 958X P7145 n n ABS DC C
1427 DC 654L GLATT n ABS DC C
1457 DC 596J W-200 n n ABS DC C
1471 DC 041U W-86 n n n n ABS DC C
1490 DC 185L W-86 n n ABS DC C
1603 SF 5151 W-200 n n ABS UNI C
1603 SF 5151 GLATT n n n ABS UNI C
241
240
244
244
253
228
222
243
243
243
256
256
252
252
253
268
266
272
272
266
260
260
261
252
268
253
240
240
240
240
240
264
271
250
271
271
262
262
250
253
243
243
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1603 SF 5151 W-87 n n n ABS UNI C
1630 SF 6346 W-200 n n n n n ABS UNI C
1630 SF 6346 GLATT n n n n n ABS UNI C
1630 SF 6346 W-101 n n n ABS UNI C
1630 SF 6346 W-87 n n n ABS UNI C
1630 SF 6346 W-105 n n n n ABS UNI C
1630 SF 6346 W-102 n n n ABS UNI C
1630 SF 6346 W-224 n n ABS UNI C
234 SF 5949 W-200 n ABS UNI C
2715 DC 90N4 GLATT n n ABS DC C
7373 DC 721H W-200 n ABS DC C
M001 DC 18P8 GLATT n n ABS ALU-Folie P
M002 DC 142R GLATT n n n 3D DC P
M003 DC 702R GLATT n n 3D 3D P
M003 DC 8525 W-200 n n n n n ABS DC E
M006 DC 066L W-200 n n ABS DC C
M007 DC 185J W-87 n n ABS DC C
M007 DC 185J W-88 n n n ABS DC C
M008 DC 18P8 GLATT n n ABS ALU-Folie P
M009 DC 18P8 GLATT n n ABS ALU-Folie P
M010 DC 297R WAVE n n 3D DC P
M011 DC 297R WAVE n n 3D DC P
M018 DC 721R W-82 n n 3D 3D P
M0785 DC 7099 W-200 n n ABS DC E
M082 DC 498V GLATT n n n ABS HG P
243
244
244
244
244
244
244
244
243
270
266
228
252
223
268
251
253
253
228
228
255
255
224
265
230
G –
I
91unverbindliche Empfehlung | non-binding recommendation90
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Glunz/Novopan
Döllken-Kanten passend zu | Döllken Edgebands to match
Glunz / NovopanPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
B110 SF 091E W-86 n n n ABS UNI C
B110 DC 858Y GLATT n n n ABS HG P
B111 DC 263V GLATT n n n ABS HG P
B3002 SF 4693 W-87 n n ABS UNI C
B3002 SF 4693 W-101 n n n ABS UNI C
B3002 SF 4693 W-200 n n n n ABS UNI C
B3002 SF 4693 GLATT n n n n ABS UNI C
B3002 SF 4693 W-86 n n n n ABS UNI C
B3002 SF 4693 W-88 n n ABS UNI C
B3002 DC 498V GLATT n n n ABS HG P
B3768 SF 6346 W-200 n n n n n ABS UNI C
B3768 SF 6346 GLATT n n n n n ABS UNI C
B3768 SF 6346 W-101 n n n ABS UNI C
B3768 SF 6346 W-87 n n n ABS UNI C
B3768 SF 6346 W-105 n n n n ABS UNI C
B3768 SF 6346 W-102 n n n ABS UNI C
B3768 SF 6346 W-224 n n ABS UNI C
B3822 SF 4693 W-87 n n ABS UNI C
B3822 SF 4693 W-101 n n n ABS UNI C
B3822 SF 4693 W-200 n n n n ABS UNI C
B3822 SF 4693 GLATT n n n n ABS UNI C
B3822 SF 4693 W-86 n n n n ABS UNI C
B3822 SF 4693 W-88 n n ABS UNI C
B4062 SF 4693 W-87 n n ABS UNI C
B4062 SF 4693 W-101 n n n ABS UNI C
B4062 SF 4693 W-200 n n n n ABS UNI C
B4062 SF 4693 GLATT n n n n ABS UNI C
B4062 SF 4693 W-86 n n n n ABS UNI C
B4062 SF 4693 W-88 n n ABS UNI C
ER1847 DC 359J W-88 n ABS DC C
ER1847 DC 359J W-87 n ABS DC C
F2039 DC 797K W-200 n n ABS DC E
F2039 DC 797K W-86 n ABS DC E
F2195 DC 32L2 W-86 n n n n ABS DC E
F2204 DC 60N4 GLATT n ABS DC C
F3009 DC 952P W-200 n n n n n ABS DC E
F3010 DC 396H W-200 n ABS DC E
F3010 DC 40J7 GLATT n ABS HG P
F353 DC 7099 W-200 n n ABS DC E
F3818 DC 09J7 W-86 n ABS DC E
F4159 DC 8580 GLATT n ABS DC E
F4159 DC 8580 W-200 n ABS DC E
238
231
229
242
242
242
242
242
242
230
244
244
244
244
244
244
244
242
242
242
242
242
242
242
242
242
242
242
242
257
257
267
267
256
262
271
257
229
265
251
268
268
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F6012 DC 70M0 W-87 n ABS DC C
F6013 DC 69M9 W-87 n ABS DC C
F6051 DC 65M2 W-200 n n ABS DC E
F6051 DC 65M2 W-101 n ABS DC E
F6056 DC 72M4 W-200 n ABS DC C
F6057 SF 437E W-200 n n ABS UNI C
F6057 SF 437E W-86 n n n ABS UNI C
F6058 DC 899V GLATT n ABS HG P
F6058 SF 922B W-200 n n ABS UNI C
F6059 SF 41A1 W-86 n ABS UNI C
F6064 DC 94L3 W-87 n n n ABS DC C
F750 DC 72M7 W-86 n ABS DC C
F755 DC 76M0 W-86 n ABS DC C
F934 DC 735V W-200 n ABS DC E
F934 DC 735V W-200 n ABS DC C
F939 DC 382L W-200 n ABS DC C
L00111 SF 862C W-200 n n n n n ABS UNI C
L00111 SF 862C W-87 n n n ABS UNI C
L00111 SF 862C W-224 n n ABS UNI C
L00115 SF 221A W-200 n ABS UNI C
L024 SF 206E W-87 n ABS UNI C
L0600 DC 51K1 GLATT n ABS HG P
L06001 SF 1072 W-200 n n ABS UNI C
L06003 SF 1402 W-200 n n n n ABS UNI C
L10051 SF 864A W-87 n n n ABS UNI C
L10052 SF 086A W-200 n ABS UNI C
L1057 SF 836B W-224 n ABS UNI C
L1057 SF 836B W-87 n n n ABS UNI C
L12081 SF 178A W-200 n ABS UNI C
L12097 SF 5908 W-200 n n n ABS UNI C
L122 SF 0187 W-200 n ABS UNI C
L1237 SF 386A W-200 n n ABS UNI C
L1304 SF 5847 W-200 n n n ABS UNI C
L15564 SF 494A W-200 n ABS UNI C
L167 SF 089A W-200 n n n ABS UNI C
L1828 SF 130D W-87 n n n ABS UNI C
L1866 SF 979C W-200 n ABS UNI C
L2065 SF 0180 W-200 n ABS UNI C
L2199 SF 203E W-87 n ABS UNI C
L2199 SF 203E W-200 n ABS UNI C
L2200 SF 202E W-87 n ABS UNI C
L2201 SF 201E W-87 n n n ABS UNI C
265
264
263
263
266
242
242
231
246
241
271
266
267
266
266
257
246
246
246
240
240
230
238
239
246
238
245
245
240
243
236
241
243
242
238
239
246
236
240
240
240
240
G –
I
92 93
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Glunz/Novopan
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L2202 SF 281D W-200 n n ABS UNI C
L2444 SF 011E W-87 n ABS UNI C
L2446 SF 169C W-87 n n ABS UNI C
L2446 SF 169C W-200 n n n ABS UNI C
L2446 DC 72N1 GLATT n ABS HG P
L301 SF 1138 W-200 n n n ABS UNI C
L3031 DC 319V GLATT n n n ABS HG P
L3031 SF 0110 W-101 n n ABS UNI C
L3031 SF 0110 W-102 n ABS UNI C
L3031 SF 0110 W-86 n ABS UNI C
L3031 SF 0110 W-200 n n n n n ABS UNI C
L3031 SF 0110 GLATT n n n ABS UNI C
L3031 SF 0110 W-105 n n n ABS UNI C
L3031 DC 707H W-79 n n ABS DC E
L3040 DC 31L2 GLATT n ABS HG P
L3191 DC 325X GLATT n n ABS HG P
L3191 SF 862C W-200 n n n n n ABS UNI C
L3191 SF 862C W-87 n n n ABS UNI C
L3191 SF 862C W-224 n n ABS UNI C
L3540 SF 404C W-200 n n ABS UNI C
L3540 SF 404C W-87 n n ABS UNI C
L3546 SF 0193 W-200 n n n ABS UNI C
L4021 SF 194A W-87 n ABS UNI C
L4030 DC 24Q7 GLATT n ABS HG P
L4030 SF 3311 W-200 n n n ABS UNI C
L4030 SF 3311 W-87 n n n n ABS UNI C
L4054 SF 158A W-200 n ABS UNI C
L4055 SF 2319 W-200 n n ABS UNI C
L4060 SF 5373 W-200 n n n ABS UNI C
L4066 SF 1153 W-200 n ABS UNI C
L4068 SF 0222 W-200 n ABS UNI C
L4070 SF 015B W-200 n ABS UNI C
L4080 SF 579D W-87 n n n ABS UNI C
L4085 SF 39A1 W-87 n ABS UNI C
L4087 SF 6414 W-200 n n n ABS UNI C
L4115 SF 6211 W-200 n n ABS UNI C
L4115 SF 6211 W-87 n n n ABS UNI C
L4116 DC 570V GLATT n ABS HG P
L4116 SF 5395 W-87 n n ABS UNI C
L4116 SF 5395 W-200 n n n n n ABS UNI C
L4118 SF 39A0 W-87 n ABS UNI C
L4132 SF 6214 W-200 n n ABS UNI C
240
236
240
240
231
239
229
236
236
236
236
236
236
265
229
229
246
246
246
241
241
237
240
229
241
241
240
240
243
239
237
236
243
241
245
244
244
230
243
243
241
244
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L4136 SF 0717 W-200 n ABS UNI C
L4138 SF 311D W-200 n n n ABS UNI C
L4143 SF 583D W-200 n n ABS UNI C
L4143 DC 274V GLATT n ABS HG P
L4147 SF 5854 GLATT n ABS UNI C
L4147 SF 5854 W-87 n n ABS UNI C
L4147 SF 5854 W-200 n n n ABS UNI C
L4149 DC 557Y GLATT n ABS HG P
L4149 SF 207C W-200 n n n ABS UNI C
L4801 SF 336C W-200 n n n ABS UNI C
L5003 DC 18P8 GLATT n n ABS ALU-Folie P
L514 DC 700R GLATT n n n 3D 3D P
L515 DC 702R GLATT n n 3D 3D P
L6062 SF 40A1 W-87 n n n ABS UNI C
L6063 SF 995E W-87 n ABS UNI C
LE1732 SF 119A W-200 n ABS UNI C
M04119 DC 7422 GLATT n n n ABS DC C
M04129 DC 103V W-86 n ABS DC C
M04129 DC 103V W-88 n n n ABS DC C
M04181 DC 7977 W-105 n n n ABS DC C
M04224 DC 298J W-105 n ABS DC C
M06211 DC 630K W-87 n ABS DC C
M10037 DC 6996 W-200 n ABS DC C
M10074 DC 315K W-200 n ABS DC C
M12003 DC 012J W-200 n ABS DC C
M12064 DC 410K W-105 n n n n ABS DC C
M12084 DC 857J GLATT n ABS DC C
M2037 DC 538J GLATT n n ABS DC C
M2046 DC 102V W-86 n ABS DC C
M2106 DC 8021 W-88 n n n ABS DC C
M2106 DC 8021 W-200 n n ABS DC C
M2111 DC 8978 W-88 n ABS DC C
M2111 DC 8978 W-87 n ABS DC C
M2112 DC 569P W-87 n n ABS DC C
M2112 DC 569P W-200 n ABS DC C
M2197 DC 15J4 W-111 n n n ABS DC E
M2440 DC 012J W-200 n ABS DC C
M2469 DC 364P W-86 n n ABS DC C
M3099 DC 8647 W-200 n n n n ABS DC C
M3099 DC 8647 W-87 n n n ABS DC C
M3111 DC 357Q GLATT n ABS DC C
M3134 DC 665N W-87 n ABS DC C
238
241
243
229
243
243
243
230
240
241
228
223
223
241
246
239
266
251
251
267
255
262
264
256
250
258
268
261
251
267
267
270
270
261
261
252
250
257
269
269
257
263
G –
I
94 95unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Glunz/Novopan
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M3230 DC 165J W-200 n ABS DC C
M3247 DC 030J W-87 n n ABS DC C
M3247 DC 030J W-86 n ABS DC C
M3247 DC 030J W-200 n n n n ABS DC C
M3280 DC 6522 W-104 n ABS DC C
M3295 DC 040V W-86 n n ABS DC C
M3414 DC 102V W-86 n ABS DC C
M3518 DC 6569 W-200 n ABS DC C
M3520 DC 439M GLATT n n n ABS DC C
M3542 DC 6635 W-88 n n ABS DC C
M3558 DC 041U W-86 n n n n ABS DC C
M3569 DC 8176 W-88 n ABS DC C
M3661 DC 396N W-86 n ABS DC C
M3662 DC 692Q W-200 n ABS DC C
M3664 DC 913P GLATT n ABS DC C
M3664 DC 913P W-86 n n n n ABS DC C
M3730 DC 76M1 W-86 n ABS DC C
M3730 DC 76M1 W-88 n n n ABS DC C
M3789 DC 388U W-200 n ABS DC C
M3789 DC 388U W-87 n n n n ABS DC C
M3813 DC 426H GLATT n ABS HG P
M3813 DC 283X W-87 n ABS DC C
M3813 DC 283X GLATT n n n ABS DC C
M3816 DC 10K0 W-105 n n ABS DC C
M3817 DC 6522 W-104 n ABS DC C
M3861 DC 791V W-105 n ABS DC C
M3861 DC 791V W-86 n n n n ABS DC C
M3866 DC 538H W-200 n n ABS DC C
M3879 DC 6635 W-88 n n ABS DC C
M3892 DC 69M5 W-86 n n ABS DC C
M3893 DC 69M8 W-87 n n ABS DC C
M3894 DC 27K7 W-111 n ABS DC E
M3964 DC 473X W-111 n n ABS DC E
M3965 DC 958N W-88 n ABS DC C
M4025 DC 655L GLATT n ABS DC C
M4028 DC 185J W-87 n n ABS DC C
M4028 DC 185J W-88 n n n ABS DC C
M4222 DC 950V GLATT n ABS DC C
M4269 DC 6968 W-105 n n ABS DC C
M4269 DC 6968 W-87 n ABS DC C
M4269 DC 6968 W-86 n n ABS DC C
M4289 DC 958X GLATT n n ABS DC C
252
250
250
250
262
250
251
262
258
263
250
268
258
264
270
270
267
267
257
257
229
255
255
251
262
267
267
261
263
264
264
255
260
271
262
253
253
271
264
264
264
271
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M4289 DC 958X P7145 n n ABS DC C
M4370 DC 154V W-86 n n n ABS DC C
M4370 DC 154V P7145 n n ABS DC C
M4394 DC 904X W-105 n n ABS DC C
M4395 DC 905X W-200 n n n ABS DC C
M4431 DC 03L0 W-86 n n ABS DC C
M4438 DC 185J W-87 n n ABS DC C
M4438 DC 185J W-88 n n n ABS DC C
M4438 DC 47K2 GLATT n ABS HG P
M4450 DC 099V W-105 n ABS DC C
M4450 DC 099V W-86 n n n ABS DC C
M4451 DC 965X GLATT n ABS DC C
M4459 DC 8021 W-88 n n n ABS DC C
M4459 DC 8021 W-200 n n ABS DC C
M4462 DC 656W W-86 n n n n ABS DC C
M4464 DC 064J W-200 n ABS DC C
M4471 DC 357Q GLATT n ABS DC C
M4473 DC 727L W-200 n n ABS DC C
M4476 DC 55L4 W-86 n n ABS DC C
M4862 DC 19L6 W-105 n ABS DC C
M4867 DC 16J7 W-105 n n ABS DC C
M4867 DC 16J7 W-86 n n n ABS DC C
M4867 DC 16J7 W-87 n n ABS DC C
M4894 DC 69M6 W-86 n ABS DC C
M4894 DC 69M6 W-87 n ABS DC C
M516 DC 703Q W-86 n ABS DC C
M516 DC 703Q W-200 n ABS DC C
M516 DC 703Q W-87 n n n ABS DC C
M516 DC 703Q W-88 n n n ABS DC C
M6037 DC 65K2 W-111 n n ABS DC E
M6039 DC 72M6 W-111 n n n ABS DC E
M6040 DC 69M9 W-87 n ABS DC C
M6046 DC 72M1 W-111 n n n ABS DC E
M6047 DC 70M1 W-111 n n ABS DC E
M6048 DC 283X W-87 n ABS DC C
M6048 DC 283X GLATT n n n ABS DC C
M6050 DC 65K3 W-111 n n n n ABS DC E
M6052 DC 53J7 W-200 n ABS DC C
M6053 DC 72M8 W-111 n ABS DC E
M6054 DC 72M5 W-111 n n ABS DC E
M6055 DC 72M6 W-111 n n n ABS DC E
M6061 DC 361H W-106 n ABS DC C
271
252
252
270
270
250
253
253
229
251
251
271
267
267
262
251
257
266
261
253
253
253
253
264
264
265
265
265
265
262
266
264
266
265
255
255
262
261
266
266
266
257
96 97unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
Grupo FratiPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1010 SF 457E W-224 n ABS UNI C
1010 SF 457E W-200 n ABS UNI C
1010 SF 457E W-86 n n n n ABS UNI C
1010 SF 457E W-102 n n n ABS UNI C
257 SF 6267 W-200 n ABS UNI C
257 SF 6267 W-86 n n n ABS UNI C
426 DC 185L W-86 n n ABS DC C
566 SF 1167 W-200 n ABS UNI C
709 SF 5847 W-200 n n n ABS UNI C
F0162 DC 785J W-104 n n ABS DC C
F0173 DC 6640 W-200 n n ABS DC C
F0331 DC 7008 W-88 n n n ABS DC C
F0331 DC 7008 W-87 n n ABS DC C
F0334 DC 7191 W-88 n ABS DC C
F0342 DC 580M W-87 n n ABS DC C
F0343 DC 959N W-87 n ABS DC C
F0345 DC 337W W-105 n ABS DC C
F0345 DC 337W W-86 n n n ABS DC C
F0346 DC 959N W-87 n ABS DC C
F0355 DC 066L W-200 n n ABS DC C
F0365 DC 879L W-200 n n ABS DC E
F0366 DC 488Y W-105 n ABS DC C
F0366 DC 488Y W-87 n ABS DC C
F0368 DC 570U W-105 n ABS DC C
F0373 DC 6996 W-200 n ABS DC C
F0374 DC 407L W-105 n ABS DC C
F0375 DC 857J GLATT n ABS DC C
F0380 DC 021K W-88 n n ABS DC C
F0381 DC 580M W-87 n n ABS DC C
F0387 DC 535N W-200 n n ABS DC C
F0389 DC 021K W-88 n n ABS DC C
F0393 DC 694L W-200 n ABS DC C
F0394 DC 554K W-200 n ABS DC C
F0397 DC 352Q W-88 n n ABS DC C
F0397 DC 352Q W-200 n ABS DC C
F0398 DC 060J W-105 n n n ABS DC C
F0408 DC 708N W-200 n ABS DC C
F0408 DC 708N W-87 n n n n ABS DC C
F0410 DC 580M W-87 n n ABS DC C
F0411 DC 8176 W-88 n ABS DC C
F0413 DC 679K W-200 n ABS DC C
F0413 DC 679K P7145 n n ABS DC C
242
242
242
242
244
244
253
239
243
267
263
265
265
265
261
271
256
256
271
251
269
260
260
261
264
258
268
250
261
261
250
264
261
256
256
250
265
265
261
268
264
264
Glunz/NovopanGrupo Frati
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M6061 DC 361H GLATT n n n ABS DC C
M6061 DC 46P8 GLATT n ABS HG P
M6065 DC 72M2 W-86 n ABS DC C
M6066 DC 72M3 W-86 n ABS DC C
M6120 DC 30P1 W-249 n n ABS DC E
M6120 DC 30P1 W-87 n n ABS DC E
M807 DC 31J4 W-105 n ABS DC C
M807 DC 31J4 W-86 n n ABS DC C
M911 DC 356Q GLATT n ABS DC C
M976 DC 506W W-105 n ABS DC C
257
229
266
266
255
255
256
256
257
260
G –
I
G –
I
98 99unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Grupo Frati
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
E
C
C
C
C
C
C
C
C
C
C
C
C
C
C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F0423 DC 439M GLATT n n n ABS DC C
F0424 DC 554K W-200 n ABS DC C
F0426 DC 283P GLATT n n ABS DC C
F0429 DC 727L W-200 n n ABS DC C
F0430 DC 021K W-88 n n ABS DC C
F0431 DC 064J W-200 n ABS DC C
F0434 DC 021K W-88 n n ABS DC C
F0435 DC 7008 W-88 n n n ABS DC C
F0435 DC 7008 W-87 n n ABS DC C
F0437 DC 102V W-86 n ABS DC C
F0439 DC 677N W-88 n n ABS DC C
F0440 DC 954M W-105 n n ABS DC C
F0440 DC 954M W-200 n ABS DC C
F0440 DC 954M W-87 n n n n ABS DC C
F0441 DC 954M W-105 n n ABS DC C
F0441 DC 954M W-200 n ABS DC C
F0441 DC 954M W-87 n n n n ABS DC C
F0442 DC 316N W-200 n ABS DC C
F0442 DC 316N W-87 n n ABS DC C
F0451 DC 396N W-86 n ABS DC C
F0454 DC 8176 W-88 n ABS DC C
F0455 DC 8176 W-88 n ABS DC C
F0456 DC 407L W-105 n ABS DC C
F0457 DC 116V P7166 n n ABS DC C
F0457 DC 116V W-200 n ABS DC C
F0459 DC 8176 W-88 n ABS DC C
F0462 DC 580M W-87 n n ABS DC C
F0466 DC 8196 W-104 n n ABS DC C
F0466 DC 8196 W-88 n ABS DC C
F0468 DC 8166 W-200 n n ABS DC C
F0472 DC 355Q GLATT n n ABS DC C
F0474 DC 7008 W-88 n n n ABS DC C
F0474 DC 7008 W-87 n n ABS DC C
F0477 DC 021K W-88 n n ABS DC C
F0479 DC 728L W-200 n n ABS DC C
F0494 DC 8176 W-88 n ABS DC C
F0495 DC 728L W-200 n n ABS DC C
F0502 DC 216J W-87 n n ABS DC C
F0520 DC 8166 W-200 n n ABS DC C
F0521 DC 040V W-86 n n ABS DC C
F0525 DC 959N W-87 n ABS DC C
F0528 DC 021K W-88 n n ABS DC C
258
261
255
266
250
251
250
265
265
251
263
271
271
271
271
271
271
256
256
258
268
268
258
252
252
268
261
268
268
268
257
265
265
250
266
268
266
254
268
250
271
250
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F0529 DC 021K W-88 n n ABS DC C
F0530 DC 359J W-88 n ABS DC C
F0530 DC 359J W-87 n ABS DC C
F0532 DC 064K W-200 n n ABS DC C
F0540 DC 957N W-200 n ABS DC C
F0541 DC 580M W-87 n n ABS DC C
F0543 DC 396N W-86 n ABS DC C
F0544 DC 8647 W-200 n n n n ABS DC C
F0544 DC 8647 W-87 n n n ABS DC C
F0546 DC 554K W-200 n ABS DC C
F0550 DC 7099 W-200 n n ABS DC E
F0551 DC 913P GLATT n ABS DC C
F0551 DC 913P W-86 n n n n ABS DC C
F0552 DC 8176 W-88 n ABS DC C
F0554 DC 7008 W-88 n n n ABS DC C
F0554 DC 7008 W-87 n n ABS DC C
F0555 DC 064J W-200 n ABS DC C
F0561 DC 8978 W-88 n ABS DC C
F0561 DC 8978 W-87 n ABS DC C
F0565 DC 061J GLATT n ABS DC C
F0567 DC 396N W-86 n ABS DC C
F0572 DC 584J W-200 n ABS DC C
F9253 DC 721H W-200 n ABS DC C
F9358 DC 468H W-105 n ABS DC C
F9549 DC 04L4 W-111 n n n ABS DC E
F9550 DC 887Y GLATT n ABS DC C
F9552 DC 913P GLATT n ABS DC C
F9552 DC 913P W-86 n n n n ABS DC C
F9555 DC 13L8 W-86 n n n ABS DC C
F9571 DC 654L GLATT n ABS DC C
F9723 DC 156W W-87 n n n ABS DC C
F9733 DC 6996 W-200 n ABS DC C
F9741 DC 108J W-200 n n ABS DC C
F9752 DC 584J W-200 n ABS DC C
F9753 DC 062J W-105 n ABS DC C
F9759 DC 03L0 W-86 n n ABS DC C
F9791 DC 465W W-87 n ABS DC C
F9793 DC 179K W-105 n n n ABS DC C
F9816 DC 535N W-200 n n ABS DC C
F9869 DC 060J W-105 n n n ABS DC C
F9901 DC 554K W-200 n ABS DC C
K0679 DC 138V W-200 n n n ABS DC C
250
257
257
251
271
261
258
269
269
261
265
270
270
268
265
265
251
270
270
250
258
261
266
259
250
269
270
270
252
262
252
264
251
261
251
250
259
253
261
250
261
252
G –
I
100 101unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Grupo Frati
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
K0679 DC 138V P7145 n n n ABS DC C 252
K0769 DC 535N W-200 n n ABS DC C 261
K1026 DC 958X GLATT n n ABS DC C 271
K1026 DC 958X P7145 n n ABS DC C 271
K122 DC 19L8 W-224 n n n ABS DC C 253
K147 DC 6968 W-105 n n ABS DC C 264
K147 DC 6968 W-87 n ABS DC C 264
K147 DC 6968 W-86 n n ABS DC C 264
K188 DC 10L1 W-87 n n n ABS DC C 251
K203 DC 064K W-200 n n ABS DC C 251
K265 DC 440U W-87 n ABS DC C 258
K296 DC 703Q W-86 n ABS DC C 265
K296 DC 703Q W-200 n ABS DC C 265
K296 DC 703Q W-87 n n n ABS DC C 265
K296 DC 703Q W-88 n n n ABS DC C 265
K345 DC 148J W-105 n n n n ABS DC C 252
K414 DC 708N W-200 n ABS DC C 265
K414 DC 708N W-87 n n n n ABS DC C 265
K453 DC 397J W-105 n n ABS DC C 258
K512 DC 538H W-200 n n ABS DC C 261
K524 DC 7008 W-88 n n n ABS DC C 265
K524 DC 7008 W-87 n n ABS DC C 265
K69 DC 58L2 P7170 n ABS DC C 261
K824 DC 703Q W-86 n ABS DC C 265
K824 DC 703Q W-200 n ABS DC C 265
K824 DC 703Q W-87 n n n ABS DC C 265
K824 DC 703Q W-88 n n n ABS DC C 265
K855 DC 959N W-87 n ABS DC C 271
K908 DC 861U W-200 n n n ABS DC C 268
K909 DC 253U W-88 n n ABS DC C 254
K909 DC 253U W-105 n n n ABS DC C 254
K956 DC 584J W-200 n ABS DC C 261
K957 DC 064J W-200 n ABS DC C 251
K965 DC 040V W-86 n n ABS DC C 250
K973 DC 739K W-88 n n ABS DC C 266
K974 DC 506W W-105 n ABS DC C 260
K978 DC 578Q W-105 n ABS DC C 261
K999 DC 253U W-88 n n ABS DC C 254
K999 DC 253U W-105 n n n ABS DC C 254
P0511 DC 8437 W-200 n n n ABS DC C 268
P0513 DC 8647 W-200 n n n n ABS DC C 269
P0513 DC 8647 W-87 n n n ABS DC C 269
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
P0514 DC 064J W-200 n ABS DC C 251
P0515 DC 037J W-88 n ABS DC C 250
P0515 DC 037J GLATT n ABS DC C 250
P0516 DC 021K W-88 n n ABS DC C 250
P0574 DC 14L3 SL111 n ABS DC E 252
P0574 DC 14L3 W-111 n n n ABS DC E 252
S5013 DC 283P GLATT n n ABS DC C 255
S5067 DC 7422 GLATT n n n ABS DC C 266
S5304 DC 8677 W-200 n n ABS DC C 269
S5304 DC 8677 W-106 n ABS DC C 269
S5382 DC 8428 W-200 n n ABS DC C 268
S5461 DC 6635 W-88 n n ABS DC C 263
S5478 DC 385L W-200 n ABS DC C 257
S5478 DC 385L W-86 n n n n ABS DC C 257
S5485 DC 538H W-200 n n ABS DC C 261
S5492 DC 6569 W-200 n ABS DC C 262
S5526 DC 791V W-105 n ABS DC C 267
S5526 DC 791V W-86 n n n n ABS DC C 267
S5573 DC 957N W-200 n ABS DC C 271
S5662 DC 167K P7166 n n n n ABS DC C 253
S5665 DC 103V W-86 n ABS DC C 251
S5665 DC 103V W-88 n n n ABS DC C 251
S5687 SF 1402 W-200 n n n n ABS UNI C 239
S9690 DC 727L W-200 n n ABS DC C 266
S9713 DC 958X GLATT n n ABS DC C 271
S9713 DC 958X P7145 n n ABS DC C 271
X0005 SF 617E W-200 n ABS UNI C 244
X0005 SF 617E W-86 n n ABS UNI C 244
X0005 SF 617E W-79 n n ABS UNI C 244
X0012 SF 6108 W-200 n n ABS UNI C 244
X0022 SF 897D W-200 n n ABS UNI C 246
X0024 SF 666A W-200 n n ABS UNI C 245
X0026 SF 5908 W-200 n n n ABS UNI C 243
X0031 SF 0179 W-200 n n n ABS UNI C 236
X0031 SF 0179 W-87 n n n n ABS UNI C 236
X0033 SF 556B W-87 n n n ABS UNI C 243
X0034 SF 922B W-200 n n ABS UNI C 246
X0040 SF 498E W-200 n ABS UNI C 242
X0252 SF 1086 W-87 n n ABS UNI C 239
X0252 SF 1086 W-200 n n n ABS UNI C 239
X0801 SF 261D W-200 n n ABS UNI C 240
X0810 SF 1083 W-200 n n ABS UNI C 238
G –
I
102 103unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
X0812 SF 0595 W-200 n n ABS UNI C 237
X0817 SF 2109 W-200 n ABS UNI C 240
X0827 SF 1878 GLATT n n ABS UNI C 240
X0827 SF 1878 W-200 n n n n ABS UNI C 240
X0827 SF 1878 W-101 n n n ABS UNI C 240
X0827 SF 1878 W-87 n n n n ABS UNI C 240
X0827 SF 1878 W-224 n n ABS UNI C 240
X0833 SF 936D W-200 n ABS UNI C 246
X0840 SF 5026 W-200 n ABS UNI C 243
X0847 SF 617A W-200 n ABS UNI C 244
X0852 SF 5949 W-200 n ABS UNI C 243
X0908 SF 1047 W-200 n ABS UNI C 238
X0908 SF 1047 W-87 n ABS UNI C 238
X0963 SF 0180 W-200 n ABS UNI C 236
X1004 SF 482B P7166 n ABS UNI C 242
X1007 SF 234A W-200 n ABS UNI C 240
X1009 SF 6287 W-200 n ABS UNI C 244
X1011 SF 5854 GLATT n ABS UNI C 243
X1011 SF 5854 W-87 n n ABS UNI C 243
X1011 SF 5854 W-200 n n n ABS UNI C 243
X1012 SF 0717 W-200 n ABS UNI C 238
X1023 SF 6403 W-200 n n n n ABS UNI C 244
X1027 SF 0189 W-200 n ABS UNI C 237
X1028 SF 0284 W-200 n ABS UNI C 237
X1056 SF 540E W-200 n n ABS UNI C 243
X1059 SF 404C W-200 n n ABS UNI C 241
X1059 SF 404C W-87 n n ABS UNI C 241
X3209 SF 6414 W-200 n n n ABS UNI C 245
XK021 SF 6346 W-200 n n n n n ABS UNI C 244
XK021 SF 6346 GLATT n n n n n ABS UNI C 244
XK021 SF 6346 W-101 n n n ABS UNI C 244
XK021 SF 6346 W-87 n n n ABS UNI C 244
XK021 SF 6346 W-105 n n n n ABS UNI C 244
XK021 SF 6346 W-102 n n n ABS UNI C 244
XK021 SF 6346 W-224 n n ABS UNI C 244
XK058 SF 091E W-86 n n n ABS UNI C 238
Grupo FratiHornitex
Döllken-Kanten passend zu | Döllken Edgebands to match
HornitexPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
B4062 SF 6346 W-200 n n n n n ABS UNI C
B4062 SF 6346 GLATT n n n n n ABS UNI C
B4062 SF 6346 W-101 n n n ABS UNI C
B4062 SF 6346 W-87 n n n ABS UNI C
B4062 SF 6346 W-105 n n n n ABS UNI C
B4062 SF 6346 W-102 n n n ABS UNI C
B4062 SF 6346 W-224 n n ABS UNI C
B4065 SF 6287 W-200 n ABS UNI C
B4353 SF 4693 W-87 n n ABS UNI C
B4353 SF 4693 W-101 n n n ABS UNI C
B4353 SF 4693 W-200 n n n n ABS UNI C
B4353 SF 4693 GLATT n n n n ABS UNI C
B4353 SF 4693 W-86 n n n n ABS UNI C
B4353 SF 4693 W-88 n n ABS UNI C
C100 SF 6346 W-200 n n n n n ABS UNI C
C100 SF 6346 GLATT n n n n n ABS UNI C
C100 SF 6346 W-101 n n n ABS UNI C
C100 SF 6346 W-87 n n n ABS UNI C
C100 SF 6346 W-105 n n n n ABS UNI C
C100 SF 6346 W-102 n n n ABS UNI C
C100 SF 6346 W-224 n n ABS UNI C
C106 SF 6241 W-101 n n ABS UNI C
C106 SF 6241 W-200 n n n ABS UNI C
C131 SF 5373 W-200 n n n ABS UNI C
C142 SF 6287 W-200 n ABS UNI C
C149 SF 4989 W-200 n n n ABS UNI C
C149 SF 4989 W-87 n n n ABS UNI C
C157 SF 5395 W-87 n n ABS UNI C
C157 SF 5395 W-200 n n n n n ABS UNI C
C163 SF 0222 W-200 n ABS UNI C
C165 SF 0805 W-200 n ABS UNI C
C167 SF 015B W-200 n ABS UNI C
C169 SF 101A W-200 n n ABS UNI C
C19 SF 158A W-200 n ABS UNI C
C199 SF 0650 W-200 n ABS UNI C
C206 SF 4861 W-101 n n n ABS UNI C
C206 SF 4861 W-200 n n n ABS UNI C
C209 SF 1086 W-87 n n ABS UNI C
C209 SF 1086 W-200 n n n ABS UNI C
C23 SF 2319 W-200 n n ABS UNI C
C320 SF 6170 W-200 n n n n ABS UNI C
C340 SF 0597 W-200 n n ABS UNI C
244
244
244
244
244
244
244
244
242
242
242
242
242
242
244
244
244
244
244
244
244
244
244
243
244
242
242
243
243
237
238
236
238
240
238
242
242
239
239
240
244
237
G –
I
104 105unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
C341 SF 0197 W-200 n ABS UNI C
C344 SF 0284 W-200 n ABS UNI C
C349 SF 4861 W-101 n n n ABS UNI C
C349 SF 4861 W-200 n n n ABS UNI C
C395 SF 0436 W-200 n n ABS UNI C
C396 SF 386A W-200 n n ABS UNI C
C417 SF 680A W-200 n n n ABS UNI C
C426 SF 194A W-87 n ABS UNI C
C50 SF 6107 W-200 n ABS UNI C
C58 SF 1138 W-200 n n n ABS UNI C
C7 SF 0110 W-101 n n ABS UNI C
C7 SF 0110 W-102 n ABS UNI C
C7 SF 0110 W-86 n ABS UNI C
C7 SF 0110 W-200 n n n n n ABS UNI C
C7 SF 0110 GLATT n n n ABS UNI C
C7 SF 0110 W-105 n n n ABS UNI C
C97 SF 4989 W-200 n n n ABS UNI C
C97 SF 4989 W-87 n n n ABS UNI C
CM11 DC 162J W-200 n n ABS DC E
CM35 DC 435K GLATT n ABS DC E
CM36 DC 435K GLATT n ABS DC E
CM37 DC 498L GLATT n ABS DC E
CM37 DC 498L W-101 n ABS DC E
CM38 DC 879L W-200 n n ABS DC E
F4004 DC 435K GLATT n ABS DC E
F4018 DC 8166 W-200 n n ABS DC C
F4156 DC 162J W-200 n n ABS DC E
F4159 DC 498L GLATT n ABS DC E
F4159 DC 498L W-101 n ABS DC E
F4161 DC 879L W-200 n n ABS DC E
H44 SF 6444 W-200 n n n ABS UNI C
H44 SF 6444 GLATT n n ABS UNI C
IP2 SF 1083 W-200 n n ABS UNI C
L001 SF 0436 W-200 n n ABS UNI C
L3031 SF 0110 W-101 n n ABS UNI C
L3031 SF 0110 W-102 n ABS UNI C
L3031 SF 0110 W-86 n ABS UNI C
L3031 SF 0110 W-200 n n n n n ABS UNI C
L3031 SF 0110 GLATT n n n ABS UNI C
L3031 SF 0110 W-105 n n n ABS UNI C
L3031 DC 707H W-79 n n ABS DC E
L4003 SF 6287 W-200 n ABS UNI C
237
237
242
242
237
241
245
240
244
239
236
236
236
236
236
236
242
242
252
258
258
260
260
269
258
268
252
260
260
269
245
245
238
237
236
236
236
236
236
236
265
244
Hornitex
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L4052 SF 1878 GLATT n n ABS UNI C
L4052 SF 1878 W-200 n n n n ABS UNI C
L4052 SF 1878 W-101 n n n ABS UNI C
L4052 SF 1878 W-87 n n n n ABS UNI C
L4052 SF 1878 W-224 n n ABS UNI C
L4054 SF 100B W-200 n n ABS UNI C
L4055 SF 2319 W-200 n n ABS UNI C
L4063 SF 3311 W-200 n n n ABS UNI C
L4063 SF 3311 W-87 n n n n ABS UNI C
L4066 SF 4989 W-200 n n n ABS UNI C
L4066 SF 4989 W-87 n n n ABS UNI C
L4068 SF 0222 W-200 n ABS UNI C
L4070 SF 0711 W-200 n n n ABS UNI C
L4071 SF 6346 W-200 n n n n n ABS UNI C
L4071 SF 6346 GLATT n n n n n ABS UNI C
L4071 SF 6346 W-101 n n n ABS UNI C
L4071 SF 6346 W-87 n n n ABS UNI C
L4071 SF 6346 W-105 n n n n ABS UNI C
L4071 SF 6346 W-102 n n n ABS UNI C
L4071 SF 6346 W-224 n n ABS UNI C
L4074 SF 0650 W-200 n ABS UNI C
L4075 SF 4861 W-101 n n n ABS UNI C
L4075 SF 4861 W-200 n n n ABS UNI C
L4078 SF 6241 W-101 n n ABS UNI C
L4078 SF 6241 W-200 n n n ABS UNI C
L4080 SF 4678 W-200 n n ABS UNI C
L4096 SF 386A W-200 n n ABS UNI C
L4106 SF 680A W-200 n n n ABS UNI C
L4110 SF 4989 W-200 n n n ABS UNI C
L4110 SF 4989 W-87 n n n ABS UNI C
L4114 SF 864A W-87 n n n ABS UNI C
L4115 SF 6211 W-200 n n ABS UNI C
L4115 SF 6211 W-87 n n n ABS UNI C
L4116 SF 5395 W-87 n n ABS UNI C
L4116 SF 5395 W-200 n n n n n ABS UNI C
L4119 SF 5992 W-200 n n n n n ABS UNI C
L4119 SF 5992 W-224 n n ABS UNI C
L4135 SF 404C W-200 n n ABS UNI C
L4135 SF 404C W-87 n n ABS UNI C
L4138 SF 311D W-200 n n n ABS UNI C
L4141 SF 0597 W-200 n n ABS UNI C
L4775 SF 086A W-200 n ABS UNI C
240
240
240
240
240
238
240
241
241
242
242
237
238
244
244
244
244
244
244
244
238
242
242
244
244
242
241
245
242
242
246
244
244
243
243
244
244
241
241
241
237
238
G –
I
106 107unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L4836 SF 1878 GLATT n n ABS UNI C
L4836 SF 1878 W-200 n n n n ABS UNI C
L4836 SF 1878 W-101 n n n ABS UNI C
L4836 SF 1878 W-87 n n n n ABS UNI C
L4836 SF 1878 W-224 n n ABS UNI C
M4008 DC 8172 W-200 n ABS DC C
M4008 DC 8172 W-88 n ABS DC C
M4010 DC 283P GLATT n n ABS DC C
M4012 DC 062J W-105 n ABS DC C
M4015 DC 439M GLATT n n n ABS DC C
M4020 DC 679K W-200 n ABS DC C
M4020 DC 679K P7145 n n ABS DC C
M4024 DC 316N W-200 n ABS DC C
M4024 DC 316N W-87 n n ABS DC C
M4025 DC 655L GLATT n ABS DC C
M4026 DC 727L W-200 n n ABS DC C
M4027 DC 439M GLATT n n n ABS DC C
M4187 DC 6794 W-88 n n ABS DC C
M4190 DC 7008 W-88 n n n ABS DC C
M4190 DC 7008 W-87 n n ABS DC C
M4192 DC 6635 W-88 n n ABS DC C
M4193 DC 6629 W-86 n n n ABS DC C
M4193 DC 6629 P7145 n n n ABS DC C
M4193 DC 6629 GLATT n n n ABS DC C
M4196 DC 030J W-87 n n ABS DC C
M4196 DC 030J W-86 n ABS DC C
M4196 DC 030J W-200 n n n n ABS DC C
M4197 DC 8428 W-200 n n ABS DC C
M4213 DC 8166 W-200 n n ABS DC C
M4218 DC 030J W-87 n n ABS DC C
M4218 DC 030J W-86 n ABS DC C
M4218 DC 030J W-200 n n n n ABS DC C
M4219 DC 8978 W-88 n ABS DC C
M4219 DC 8978 W-87 n ABS DC C
M4223 DC 8021 W-88 n n n ABS DC C
M4223 DC 8021 W-200 n n ABS DC C
M4227 DC 060J W-105 n n n ABS DC C
M4230 DC 8021 W-88 n n n ABS DC C
M4230 DC 8021 W-200 n n ABS DC C
M4231 DC 6967 W-200 n ABS DC C
M4241 DC 315K W-200 n ABS DC C
M4242 DC 8021 W-88 n n n ABS DC C
240
240
240
240
240
268
268
255
251
258
264
264
256
256
262
266
258
264
265
265
263
263
263
263
250
250
250
268
268
250
250
250
270
270
267
267
250
267
267
264
256
267
Hornitex
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M4242 DC 8021 W-200 n n ABS DC C
M4245 DC 6968 W-105 n n ABS DC C
M4245 DC 6968 W-87 n ABS DC C
M4245 DC 6968 W-86 n n ABS DC C
M4246 DC 021K W-88 n n ABS DC C
M4250 DC 654L GLATT n ABS DC C
M4269 DC 8166 W-200 n n ABS DC C
M4271 DC 654L GLATT n ABS DC C
M4289 DC 099V W-105 n ABS DC C
M4289 DC 099V W-86 n n n ABS DC C
M4292 DC 958N W-88 n ABS DC C
M4368 DC 8172 W-200 n ABS DC C
M4368 DC 8172 W-88 n ABS DC C
M4369 DC 061J GLATT n ABS DC C
M4370 DC 030J W-87 n n ABS DC C
M4370 DC 030J W-86 n ABS DC C
M4370 DC 030J W-200 n n n n ABS DC C
M4417 DC 6967 W-200 n ABS DC C
M4432 DC 954M W-105 n n ABS DC C
M4432 DC 954M W-200 n ABS DC C
M4432 DC 954M W-87 n n n n ABS DC C
M4459 DC 8021 W-88 n n n ABS DC C
M4459 DC 8021 W-200 n n ABS DC C
M4469 DC 728L W-200 n n ABS DC C
M4471 DC 6968 W-105 n n ABS DC C
M4471 DC 6968 W-87 n ABS DC C
M4471 DC 6968 W-86 n n ABS DC C
M4472 DC 655L GLATT n ABS DC C
N173 DC 569P W-87 n n ABS DC C
N173 DC 569P W-200 n ABS DC C
N270 DC 6635 W-88 n n ABS DC C
N491 DC 8172 W-200 n ABS DC C
N491 DC 8172 W-88 n ABS DC C
N570 DC 6629 W-86 n n n ABS DC C
N570 DC 6629 P7145 n n n ABS DC C
N570 DC 6629 GLATT n n n ABS DC C
N686 DC 8150 W-88 n ABS DC C
N842 DC 030J W-87 n n ABS DC C
N842 DC 030J W-86 n ABS DC C
N842 DC 030J W-200 n n n n ABS DC C
N885 DC 8647 W-200 n n n n ABS DC C
N885 DC 8647 W-87 n n n ABS DC C
267
264
264
264
250
262
268
262
251
251
271
268
268
250
250
250
250
264
271
271
271
267
267
266
264
264
264
262
261
261
263
268
268
263
263
263
267
250
250
250
269
269
G –
I
108 109unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
N888 DC 6629 W-86 n n n ABS DC C
N888 DC 6629 P7145 n n n ABS DC C
N888 DC 6629 GLATT n n n ABS DC C
N971 DC 8647 W-200 n n n n ABS DC C
N971 DC 8647 W-87 n n n ABS DC C
NA23 DC 062J W-105 n ABS DC C
NA55 DC 7191 W-88 n ABS DC C
NA87 DC 6967 W-200 n ABS DC C
NC90 DC 8978 W-88 n ABS DC C
NC90 DC 8978 W-87 n ABS DC C
NC94 DC 7855 W-105 n ABS DC C
ND33 DC 6968 W-105 n n ABS DC C
ND33 DC 6968 W-87 n ABS DC C
ND33 DC 6968 W-86 n n ABS DC C
ND99 DC 8021 W-88 n n n ABS DC C
ND99 DC 8021 W-200 n n ABS DC C
NE40 DC 655L GLATT n ABS DC C
NE47 DC 679K W-200 n ABS DC C
NE47 DC 679K P7145 n n ABS DC C
NE71 DC 021K W-88 n n ABS DC C
NE74 DC 679K W-200 n ABS DC C
NE74 DC 679K P7145 n n ABS DC C
NE79 DC 439M GLATT n n n ABS DC C
NE84 DC 655L GLATT n ABS DC C
NF16 DC 654L GLATT n ABS DC C
NF90 DC 654L GLATT n ABS DC C
NH10 DC 8166 W-200 n n ABS DC C
PF13 SF 5373 W-200 n n n ABS UNI C
PF23 SF 6445 W-200 n n ABS UNI C
PF35 SF 6008 W-200 n n ABS UNI C
PF4 SF 6346 W-200 n n n n n ABS UNI C
PF4 SF 6346 GLATT n n n n n ABS UNI C
PF4 SF 6346 W-101 n n n ABS UNI C
PF4 SF 6346 W-87 n n n ABS UNI C
PF4 SF 6346 W-105 n n n n ABS UNI C
PF4 SF 6346 W-102 n n n ABS UNI C
PF4 SF 6346 W-224 n n ABS UNI C
PF44 SF 6346 W-200 n n n n n ABS UNI C
PF44 SF 6346 GLATT n n n n n ABS UNI C
PF44 SF 6346 W-101 n n n ABS UNI C
PF44 SF 6346 W-87 n n n ABS UNI C
PF44 SF 6346 W-105 n n n n ABS UNI C
263
263
263
269
269
251
265
264
270
270
267
264
264
264
267
267
262
264
264
250
264
264
258
262
262
262
268
243
245
244
244
244
244
244
244
244
244
244
244
244
244
244
Hornitex
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
PF44 SF 6346 W-102 n n n ABS UNI C
PF44 SF 6346 W-224 n n ABS UNI C
PF48 SF 6267 W-200 n ABS UNI C
PF48 SF 6267 W-86 n n n ABS UNI C
PF58 SF 6108 W-200 n n ABS UNI C
PF65 SF 6108 W-200 n n ABS UNI C
W001 SF 6444 W-200 n n n ABS UNI C
W001 SF 6444 GLATT n n ABS UNI C
W044 SF 4693 W-87 n n ABS UNI C
W044 SF 4693 W-101 n n n ABS UNI C
W044 SF 4693 W-200 n n n n ABS UNI C
W044 SF 4693 GLATT n n n n ABS UNI C
W044 SF 4693 W-86 n n n n ABS UNI C
W044 SF 4693 W-88 n n ABS UNI C
244
244
244
244
244
244
245
245
242
242
242
242
242
242
G –
I
110 111
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Döllken-Kanten passend zu | Döllken Edgebands to match
InnovusPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
B110 SF 091E W-86 n n n ABS UNI C
B110 DC 858Y GLATT n n n ABS HG P
B3002 SF 4693 W-87 n n ABS UNI C
B3002 SF 4693 W-101 n n n ABS UNI C
B3002 SF 4693 W-200 n n n n ABS UNI C
B3002 SF 4693 GLATT n n n n ABS UNI C
B3002 SF 4693 W-86 n n n n ABS UNI C
B3002 SF 4693 W-88 n n ABS UNI C
B3002 DC 498V GLATT n n n ABS HG P
B3768 SF 6346 W-200 n n n n n ABS UNI C
B3768 SF 6346 GLATT n n n n n ABS UNI C
B3768 SF 6346 W-101 n n n ABS UNI C
B3768 SF 6346 W-87 n n n ABS UNI C
B3768 SF 6346 W-105 n n n n ABS UNI C
B3768 SF 6346 W-102 n n n ABS UNI C
B3768 SF 6346 W-224 n n ABS UNI C
B3822 SF 4693 W-87 n n ABS UNI C
B3822 SF 4693 W-101 n n n ABS UNI C
B3822 SF 4693 W-200 n n n n ABS UNI C
B3822 SF 4693 GLATT n n n n ABS UNI C
B3822 SF 4693 W-86 n n n n ABS UNI C
B3822 SF 4693 W-88 n n ABS UNI C
B4062 SF 4693 W-87 n n ABS UNI C
B4062 SF 4693 W-101 n n n ABS UNI C
B4062 SF 4693 W-200 n n n n ABS UNI C
B4062 SF 4693 GLATT n n n n ABS UNI C
B4062 SF 4693 W-86 n n n n ABS UNI C
B4062 SF 4693 W-88 n n ABS UNI C
F2039 DC 797K W-200 n n ABS DC E
F2039 DC 797K W-86 n ABS DC E
F2195 DC 32L2 W-86 n n n n ABS DC E
F2204 DC 60N4 GLATT n ABS DC C
F3009 DC 952P W-200 n n n n n ABS DC E
F3010 DC 396H W-200 n ABS DC E
F3010 DC 40J7 GLATT n ABS HG P
F3818 DC 09J7 W-86 n ABS DC E
F6012 DC 70M0 W-87 n ABS DC C
F6013 DC 69M9 W-87 n ABS DC C
F6051 DC 65M2 W-200 n n ABS DC E
F6051 DC 65M2 W-101 n ABS DC E
F6056 DC 72M4 W-200 n ABS DC C
F6057 SF 437E W-200 n n ABS UNI C
238
231
242
242
242
242
242
242
230
244
244
244
244
244
244
244
242
242
242
242
242
242
242
242
242
242
242
242
267
267
256
262
271
257
229
251
265
264
263
263
266
242
Innovus
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F6057 SF 437E W-86 n n n ABS UNI C
F6058 DC 899V GLATT n ABS HG P
F6058 SF 922B W-200 n n ABS UNI C
F6059 SF 41A1 W-86 n ABS UNI C
F6064 DC 94L3 W-87 n n n ABS DC C
F750 DC 72M7 W-86 n ABS DC C
F755 DC 76M0 W-86 n ABS DC C
F934 DC 735V W-200 n ABS DC E
F934 DC 735V W-200 n ABS DC C
F939 DC 382L W-200 n ABS DC C
L00111 SF 862C W-200 n n n n n ABS UNI C
L00111 SF 862C W-87 n n n ABS UNI C
L00111 SF 862C W-224 n n ABS UNI C
L00115 SF 221A W-200 n ABS UNI C
L024 SF 206E W-87 n ABS UNI C
L0600 DC 51K1 GLATT n ABS HG P
L06001 SF 1072 W-200 n n ABS UNI C
L06002 SF 315E W-200 n n ABS UNI C
L06003 SF 1402 W-200 n n n n ABS UNI C
L10051 SF 864A W-87 n n n ABS UNI C
L10052 SF 086A W-200 n ABS UNI C
L1057 SF 836B W-224 n ABS UNI C
L1057 SF 836B W-87 n n n ABS UNI C
L12081 SF 178A W-200 n ABS UNI C
L12097 SF 5908 W-200 n n n ABS UNI C
L122 SF 0187 W-200 n ABS UNI C
L1237 SF 386A W-200 n n ABS UNI C
L1304 SF 5847 W-200 n n n ABS UNI C
L167 SF 089A W-200 n n n ABS UNI C
L1828 SF 130D W-87 n n n ABS UNI C
L1866 SF 979C W-200 n ABS UNI C
L2199 SF 203E W-87 n ABS UNI C
L2199 SF 203E W-200 n ABS UNI C
L2200 SF 202E W-87 n ABS UNI C
L2201 SF 201E W-87 n n n ABS UNI C
L2202 SF 281D W-200 n n ABS UNI C
L2444 SF 011E W-87 n ABS UNI C
L2446 SF 169C W-87 n n ABS UNI C
L2446 SF 169C W-200 n n n ABS UNI C
L2446 DC 72N1 GLATT n ABS HG P
L301 SF 1138 W-200 n n n ABS UNI C
L3031 DC 319V GLATT n n n ABS HG P
242
231
246
241
271
266
267
266
266
257
246
246
246
240
240
230
238
241
239
246
238
245
245
240
243
236
241
243
238
239
246
240
240
240
240
240
236
240
240
231
239
229
G –
I
112 113
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L3031 SF 0110 W-101 n n ABS UNI C
L3031 SF 0110 W-102 n ABS UNI C
L3031 SF 0110 W-86 n ABS UNI C
L3031 SF 0110 W-200 n n n n n ABS UNI C
L3031 SF 0110 GLATT n n n ABS UNI C
L3031 SF 0110 W-105 n n n ABS UNI C
L3031 DC 707H W-79 n n ABS DC E
L3191 DC 325X GLATT n n ABS HG P
L3191 SF 862C W-200 n n n n n ABS UNI C
L3191 SF 862C W-87 n n n ABS UNI C
L3191 SF 862C W-224 n n ABS UNI C
L3540 SF 404C W-200 n n ABS UNI C
L3540 SF 404C W-87 n n ABS UNI C
L3546 SF 0193 W-200 n n n ABS UNI C
L4030 DC 24Q7 GLATT n ABS HG P
L4030 SF 3311 W-200 n n n ABS UNI C
L4030 SF 3311 W-87 n n n n ABS UNI C
L4054 SF 158A W-200 n ABS UNI C
L4055 SF 2319 W-200 n n ABS UNI C
L4060 SF 5373 W-200 n n n ABS UNI C
L4068 SF 0222 W-200 n ABS UNI C
L4070 SF 015B W-200 n ABS UNI C
L4080 SF 579D W-87 n n n ABS UNI C
L4085 SF 39A1 W-87 n ABS UNI C
L4115 SF 6211 W-200 n n ABS UNI C
L4115 SF 6211 W-87 n n n ABS UNI C
L4116 DC 570V GLATT n ABS HG P
L4116 SF 5395 W-87 n n ABS UNI C
L4116 SF 5395 W-200 n n n n n ABS UNI C
L4118 SF 39A0 W-87 n ABS UNI C
L4132 SF 6214 W-200 n n ABS UNI C
L4136 SF 0717 W-200 n ABS UNI C
L4143 SF 583D W-200 n n ABS UNI C
L4143 DC 274V GLATT n ABS HG P
L4147 SF 5854 GLATT n ABS UNI C
L4147 SF 5854 W-87 n n ABS UNI C
L4147 SF 5854 W-200 n n n ABS UNI C
L4149 DC 557Y GLATT n ABS HG P
L4149 SF 207C W-200 n n n ABS UNI C
L4801 SF 336C W-200 n n n ABS UNI C
L5003 DC 18P8 GLATT n n ABS ALU-Folie P
L514 DC 700R GLATT n n n 3D 3D P
236
236
236
236
236
236
265
229
246
246
246
241
241
237
229
241
241
240
240
243
237
236
243
241
244
244
230
243
243
241
244
238
243
229
243
243
243
230
240
241
228
223
Innovus
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L515 DC 702R GLATT n n 3D 3D P
L6062 SF 40A1 W-87 n n n ABS UNI C
L6063 SF 995E W-87 n ABS UNI C
LE1732 SF 119A W-200 n ABS UNI C
M 6126 DC 59N8 W-111 n n n ABS DC E
M 6156 DC 35L0 W-111 n n ABS DC E
M04119 DC 7422 GLATT n n n ABS DC C
M04129 DC 103V W-86 n ABS DC C
M04129 DC 103V W-88 n n n ABS DC C
M04181 DC 7977 W-105 n n n ABS DC C
M04224 DC 298J W-105 n ABS DC C
M06211 DC 630K W-87 n ABS DC C
M10037 DC 6996 W-200 n ABS DC C
M10074 DC 315K W-200 n ABS DC C
M12003 DC 012J W-200 n ABS DC C
M12064 DC 410K W-105 n n n n ABS DC C
M12084 DC 857J GLATT n ABS DC C
M2037 DC 538J GLATT n n ABS DC C
M2046 DC 102V W-86 n ABS DC C
M2106 DC 8021 W-88 n n n ABS DC C
M2106 DC 8021 W-200 n n ABS DC C
M2111 DC 8978 W-88 n ABS DC C
M2111 DC 8978 W-87 n ABS DC C
M2112 DC 569P W-87 n n ABS DC C
M2112 DC 569P W-200 n ABS DC C
M2197 DC 15J4 W-111 n n n ABS DC E
M2440 DC 012J W-200 n ABS DC C
M2469 DC 364P W-86 n n ABS DC C
M3099 DC 8647 W-200 n n n n ABS DC C
M3099 DC 8647 W-87 n n n ABS DC C
M3230 DC 165J W-200 n ABS DC C
M3247 DC 030J W-87 n n ABS DC C
M3247 DC 030J W-86 n ABS DC C
M3247 DC 030J W-200 n n n n ABS DC C
M3280 DC 6522 W-104 n ABS DC C
M3518 DC 6569 W-200 n ABS DC C
M3520 DC 439M GLATT n n n ABS DC C
M3542 DC 6635 W-88 n n ABS DC C
M3558 DC 041U W-86 n n n n ABS DC C
M3569 DC 8176 W-88 n ABS DC C
M3662 DC 692Q W-200 n ABS DC C
M3730 DC 76M1 W-86 n ABS DC C
223
241
246
239
262
257
266
251
251
267
255
262
264
256
250
258
268
261
251
267
267
270
270
261
261
252
250
257
269
269
252
250
250
250
262
262
258
263
250
268
264
267
G –
I
114 115unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M3730 DC 76M1 W-88 n n n ABS DC C
M3789 DC 388U W-200 n ABS DC C
M3789 DC 388U W-87 n n n n ABS DC C
M3813 DC 426H GLATT n ABS HG P
M3813 DC 283X W-87 n ABS DC C
M3813 DC 283X GLATT n n n ABS DC C
M3817 DC 6522 W-104 n ABS DC C
M3861 DC 791V W-105 n ABS DC C
M3861 DC 791V W-86 n n n n ABS DC C
M3866 DC 538H W-200 n n ABS DC C
M3879 DC 6635 W-88 n n ABS DC C
M3892 DC 69M5 W-86 n n ABS DC C
M3893 DC 69M8 W-87 n n ABS DC C
M3894 DC 27K7 W-111 n ABS DC E
M3964 DC 473X W-111 n n ABS DC E
M3965 DC 958N W-88 n ABS DC C
M4025 DC 655L GLATT n ABS DC C
M4222 DC 950V GLATT n ABS DC C
M4269 DC 6968 W-105 n n ABS DC C
M4269 DC 6968 W-87 n ABS DC C
M4269 DC 6968 W-86 n n ABS DC C
M4289 DC 958X GLATT n n ABS DC C
M4289 DC 958X P7145 n n ABS DC C
M4431 DC 03L0 W-86 n n ABS DC C
M4438 DC 185J W-87 n n ABS DC C
M4438 DC 185J W-88 n n n ABS DC C
M4438 DC 47K2 GLATT n ABS HG P
M4451 DC 965X GLATT n ABS DC C
M4462 DC 656W W-86 n n n n ABS DC C
M4862 DC 19L6 W-105 n ABS DC C
M4867 DC 16J7 W-105 n n ABS DC C
M4867 DC 16J7 W-86 n n n ABS DC C
M4867 DC 16J7 W-87 n n ABS DC C
M4894 DC 69M6 W-86 n ABS DC C
M4894 DC 69M6 W-87 n ABS DC C
M516 DC 703Q W-86 n ABS DC C
M516 DC 703Q W-200 n ABS DC C
M516 DC 703Q W-87 n n n ABS DC C
M516 DC 703Q W-88 n n n ABS DC C
M6037 DC 65K2 W-111 n n ABS DC E
M6046 DC 72M1 W-111 n n n ABS DC E
M6047 DC 70M1 W-111 n n ABS DC E
267
257
257
229
255
255
262
267
267
261
263
264
264
255
260
271
262
271
264
264
264
271
271
250
253
253
229
271
262
253
253
253
253
264
264
265
265
265
265
262
266
265
Innovus
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M6048 DC 283X W-87 n ABS DC C
M6048 DC 283X GLATT n n n ABS DC C
M6050 DC 65K3 W-111 n n n n ABS DC E
M6052 DC 53J7 W-200 n ABS DC C
M6053 DC 72M8 W-111 n ABS DC E
M6054 DC 72M5 W-111 n n ABS DC E
M6055 DC 72M6 W-111 n n n ABS DC E
M6061 DC 361H W-106 n ABS DC C
M6061 DC 361H GLATT n n n ABS DC C
M6061 DC 46P8 GLATT n ABS HG P
M6065 DC 72M2 W-86 n ABS DC C
M6066 DC 72M3 W-86 n ABS DC C
M6120 DC 30P1 W-249 n n ABS DC E
M6120 DC 30P1 W-87 n n ABS DC E
M6128 DC 90Q1 W-79 n ABS DC E
M807 DC 31J4 W-105 n ABS DC C
M807 DC 31J4 W-86 n n ABS DC C
M911 DC 356Q GLATT n ABS DC C
M976 DC 506W W-105 n ABS DC C
255
255
262
261
266
266
266
257
257
229
266
266
255
255
270
256
256
257
260
G –
I
117unverbindliche Empfehlung | non-binding recommendation116
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
B0021 SF 6346 W-200 n n n n n ABS UNI C
B0021 SF 6346 GLATT n n n n n ABS UNI C
B0021 SF 6346 W-101 n n n ABS UNI C
B0021 SF 6346 W-87 n n n ABS UNI C
B0021 SF 6346 W-105 n n n n ABS UNI C
B0021 SF 6346 W-102 n n n ABS UNI C
B0021 SF 6346 W-224 n n ABS UNI C
B110 SF 091E W-86 n n n ABS UNI C
B110 DC 858Y GLATT n n n ABS HG P
B3002 SF 4693 W-87 n n ABS UNI C
B3002 SF 4693 W-101 n n n ABS UNI C
B3002 SF 4693 W-200 n n n n ABS UNI C
B3002 SF 4693 GLATT n n n n ABS UNI C
B3002 SF 4693 W-86 n n n n ABS UNI C
B3002 SF 4693 W-88 n n ABS UNI C
B3002 DC 498V GLATT n n n ABS HG P
B3768 SF 6346 W-200 n n n n n ABS UNI C
B3768 SF 6346 GLATT n n n n n ABS UNI C
B3768 SF 6346 W-101 n n n ABS UNI C
B3768 SF 6346 W-87 n n n ABS UNI C
B3768 SF 6346 W-105 n n n n ABS UNI C
B3768 SF 6346 W-102 n n n ABS UNI C
B3768 SF 6346 W-224 n n ABS UNI C
B3822 SF 4693 W-87 n n ABS UNI C
B3822 SF 4693 W-101 n n n ABS UNI C
B3822 SF 4693 W-200 n n n n ABS UNI C
B3822 SF 4693 GLATT n n n n ABS UNI C
B3822 SF 4693 W-86 n n n n ABS UNI C
B3822 SF 4693 W-88 n n ABS UNI C
B4062 SF 4693 W-87 n n ABS UNI C
B4062 SF 4693 W-101 n n n ABS UNI C
B4062 SF 4693 W-200 n n n n ABS UNI C
B4062 SF 4693 GLATT n n n n ABS UNI C
B4062 SF 4693 W-86 n n n n ABS UNI C
B4062 SF 4693 W-88 n n ABS UNI C
F2039 DC 797K W-200 n n ABS DC E
F2039 DC 797K W-86 n ABS DC E
F2195 DC 32L2 W-86 n n n n ABS DC E
F2204 DC 60N4 GLATT n ABS DC C
F3009 DC 952P W-200 n n n n n ABS DC E
F3010 DC 396H W-200 n ABS DC E
F3010 DC 40J7 GLATT n ABS HG P
Döllken-Kanten passend zu | Döllken Edgebands to match
Isoroy
244
244
244
244
244
244
244
238
231
242
242
242
242
242
242
230
244
244
244
244
244
244
244
242
242
242
242
242
242
242
242
242
242
242
242
267
267
256
262
271
257
229
Isoroy
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F3818 DC 09J7 W-86 n ABS DC E
F6012 DC 70M0 W-87 n ABS DC C
F6013 DC 69M9 W-87 n ABS DC C
F6051 DC 65M2 W-200 n n ABS DC E
F6051 DC 65M2 W-101 n ABS DC E
F6056 DC 72M4 W-200 n ABS DC C
F6057 SF 437E W-200 n n ABS UNI C
F6057 SF 437E W-86 n n n ABS UNI C
F6058 DC 899V GLATT n ABS HG P
F6058 SF 922B W-200 n n ABS UNI C
F6059 SF 41A1 W-86 n ABS UNI C
F6064 DC 94L3 W-87 n n n ABS DC C
F750 DC 72M7 W-86 n ABS DC C
F755 DC 76M0 W-86 n ABS DC C
F934 DC 735V W-200 n ABS DC E
F934 DC 735V W-200 n ABS DC C
F939 DC 382L W-200 n ABS DC C
L00111 SF 862C W-200 n n n n n ABS UNI C
L00111 SF 862C W-87 n n n ABS UNI C
L00111 SF 862C W-224 n n ABS UNI C
L00115 SF 221A W-200 n ABS UNI C
L00116 SF 6108 W-200 n n ABS UNI C
L00160 SF 4861 W-101 n n n ABS UNI C
L00160 SF 4861 W-200 n n n ABS UNI C
L00240 SF 5395 W-87 n n ABS UNI C
L00240 SF 5395 W-200 n n n n n ABS UNI C
L00760 SF 0193 W-200 n n n ABS UNI C
L00901 SF 0110 W-101 n n ABS UNI C
L00901 SF 0110 W-102 n ABS UNI C
L00901 SF 0110 W-86 n ABS UNI C
L00901 SF 0110 W-200 n n n n n ABS UNI C
L00901 SF 0110 GLATT n n n ABS UNI C
L00901 SF 0110 W-105 n n n ABS UNI C
L00938 SF 1083 W-200 n n ABS UNI C
L024 SF 206E W-87 n ABS UNI C
L0600 DC 51K1 GLATT n ABS HG P
L06001 SF 1072 W-200 n n ABS UNI C
L06002 SF 315E W-200 n n ABS UNI C
L06003 SF 1402 W-200 n n n n ABS UNI C
L10051 SF 864A W-87 n n n ABS UNI C
L10052 SF 086A W-200 n ABS UNI C
L1057 SF 836B W-224 n ABS UNI C
251
265
264
263
263
266
242
242
231
246
241
271
266
267
266
266
257
246
246
246
240
244
242
242
243
243
237
236
236
236
236
236
236
238
240
230
238
241
239
246
238
245
G –
I
118 119
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L1057 SF 836B W-87 n n n ABS UNI C
L12081 SF 178A W-200 n ABS UNI C
L12097 SF 5908 W-200 n n n ABS UNI C
L122 SF 0187 W-200 n ABS UNI C
L1237 SF 386A W-200 n n ABS UNI C
L1304 SF 5847 W-200 n n n ABS UNI C
L15562 SF 680A W-200 n n n ABS UNI C
L15563 SF 5026 W-200 n ABS UNI C
L15566 SF 6241 W-101 n n ABS UNI C
L15566 SF 6241 W-200 n n n ABS UNI C
L15568 SF 5854 GLATT n ABS UNI C
L15568 SF 5854 W-87 n n ABS UNI C
L15568 SF 5854 W-200 n n n ABS UNI C
L167 SF 089A W-200 n n n ABS UNI C
L1828 SF 130D W-87 n n n ABS UNI C
L1866 SF 979C W-200 n ABS UNI C
L2199 SF 203E W-87 n ABS UNI C
L2199 SF 203E W-200 n ABS UNI C
L2200 SF 202E W-87 n ABS UNI C
L2201 SF 201E W-87 n n n ABS UNI C
L2202 SF 281D W-200 n n ABS UNI C
L2444 SF 011E W-87 n ABS UNI C
L2446 SF 169C W-87 n n ABS UNI C
L2446 SF 169C W-200 n n n ABS UNI C
L2446 DC 72N1 GLATT n ABS HG P
L301 SF 1138 W-200 n n n ABS UNI C
L3031 DC 319V GLATT n n n ABS HG P
L3031 SF 0110 W-101 n n ABS UNI C
L3031 SF 0110 W-102 n ABS UNI C
L3031 SF 0110 W-86 n ABS UNI C
L3031 SF 0110 W-200 n n n n n ABS UNI C
L3031 SF 0110 GLATT n n n ABS UNI C
L3031 SF 0110 W-105 n n n ABS UNI C
L3031 DC 707H W-79 n n ABS DC E
L3191 DC 325X GLATT n n ABS HG P
L3191 SF 862C W-200 n n n n n ABS UNI C
L3191 SF 862C W-87 n n n ABS UNI C
L3191 SF 862C W-224 n n ABS UNI C
L3540 SF 404C W-200 n n ABS UNI C
L3540 SF 404C W-87 n n ABS UNI C
L3546 SF 0193 W-200 n n n ABS UNI C
L4030 DC 24Q7 GLATT n ABS HG P
245
240
243
236
241
243
245
243
244
244
243
243
243
238
239
246
240
240
240
240
240
236
240
240
231
239
229
236
236
236
236
236
236
265
229
246
246
246
241
241
237
229
Isoroy
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L4030 SF 3311 W-200 n n n ABS UNI C
L4030 SF 3311 W-87 n n n n ABS UNI C
L4054 SF 158A W-200 n ABS UNI C
L4055 SF 2319 W-200 n n ABS UNI C
L4060 SF 5373 W-200 n n n ABS UNI C
L4066 SF 4989 W-200 n n n ABS UNI C
L4066 SF 4989 W-87 n n n ABS UNI C
L4068 SF 0222 W-200 n ABS UNI C
L4070 SF 015B W-200 n ABS UNI C
L4080 SF 579D W-87 n n n ABS UNI C
L4085 SF 39A1 W-87 n ABS UNI C
L4115 SF 6211 W-200 n n ABS UNI C
L4115 SF 6211 W-87 n n n ABS UNI C
L4116 DC 570V GLATT n ABS HG P
L4116 SF 5395 W-87 n n ABS UNI C
L4116 SF 5395 W-200 n n n n n ABS UNI C
L4118 SF 39A0 W-87 n ABS UNI C
L4132 SF 6214 W-200 n n ABS UNI C
L4136 SF 0717 W-200 n ABS UNI C
L4143 SF 583D W-200 n n ABS UNI C
L4143 DC 274V GLATT n ABS HG P
L4147 SF 5854 GLATT n ABS UNI C
L4147 SF 5854 W-87 n n ABS UNI C
L4147 SF 5854 W-200 n n n ABS UNI C
L4149 DC 557Y GLATT n ABS HG P
L4149 SF 207C W-200 n n n ABS UNI C
L4801 SF 336C W-200 n n n ABS UNI C
L5003 DC 18P8 GLATT n n ABS ALU-Folie P
L514 DC 700R GLATT n n n 3D 3D P
L515 DC 702R GLATT n n 3D 3D P
L6062 SF 40A1 W-87 n n n ABS UNI C
L6063 SF 995E W-87 n ABS UNI C
LE1732 SF 119A W-200 n ABS UNI C
M04119 DC 7422 GLATT n n n ABS DC C
M04128 DC 064K W-200 n n ABS DC C
M04129 DC 103V W-86 n ABS DC C
M04129 DC 103V W-88 n n n ABS DC C
M04181 DC 7977 W-105 n n n ABS DC C
M04224 DC 298J W-105 n ABS DC C
M06073 DC 7008 W-88 n n n ABS DC C
M06073 DC 7008 W-87 n n ABS DC C
M06081 DC 8166 W-200 n n ABS DC C
241
241
240
240
243
242
242
237
236
243
241
244
244
230
243
243
241
244
238
243
229
243
243
243
230
240
241
228
223
223
241
246
239
266
251
251
251
267
255
265
265
268
G –
I
120 121unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M06198 DC 8166 W-200 n n ABS DC C
M06210 DC 246K W-200 n n ABS DC C
M06210 DC 246K W-87 n ABS DC C
M06211 DC 630K W-87 n ABS DC C
M06218 DC 6968 W-105 n n ABS DC C
M06218 DC 6968 W-87 n ABS DC C
M06218 DC 6968 W-86 n n ABS DC C
M10036 DC 8654 W-200 n ABS DC C
M10037 DC 6996 W-200 n ABS DC C
M10074 DC 315K W-200 n ABS DC C
M10081 DC 8166 W-200 n n ABS DC C
M12003 DC 012J W-200 n ABS DC C
M12009 DC 8978 W-88 n ABS DC C
M12009 DC 8978 W-87 n ABS DC C
M12064 DC 410K W-105 n n n n ABS DC C
M12084 DC 857J GLATT n ABS DC C
M15569 DC 703Q W-86 n ABS DC C
M15569 DC 703Q W-200 n ABS DC C
M15569 DC 703Q W-87 n n n ABS DC C
M15569 DC 703Q W-88 n n n ABS DC C
M2005 DC 517J W-87 n n ABS DC C
M2005 DC 517J W-200 n ABS DC C
M2032 DC 694L W-200 n ABS DC C
M2034 DC 791V W-105 n ABS DC C
M2034 DC 791V W-86 n n n n ABS DC C
M2037 DC 538J GLATT n n ABS DC C
M2046 DC 102V W-86 n ABS DC C
M2106 DC 8021 W-88 n n n ABS DC C
M2106 DC 8021 W-200 n n ABS DC C
M2109 DC 7977 W-105 n n n ABS DC C
M2111 DC 8978 W-88 n ABS DC C
M2111 DC 8978 W-87 n ABS DC C
M2112 DC 569P W-87 n n ABS DC C
M2112 DC 569P W-200 n ABS DC C
M2113 DC 727L W-200 n n ABS DC C
M2194 DC 629N W-87 n ABS DC E
M2194 DC 629N W-105 n ABS DC C
M2194 DC 629N W-111 n n n ABS DC E
M2197 DC 15J4 W-111 n n n ABS DC E
M2203 DC 407L W-105 n ABS DC C
M2440 DC 012J W-200 n ABS DC C
M2441 DC 021K W-88 n n ABS DC C
268
254
254
262
264
264
264
269
264
256
268
250
270
270
258
268
265
265
265
265
260
260
264
267
267
261
251
267
267
267
270
270
261
261
266
262
262
262
252
258
250
250
Isoroy
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M2442 DC 8166 W-200 n n ABS DC C
M2443 DC 905X W-200 n n n ABS DC C
M2469 DC 364P W-86 n n ABS DC C
M3099 DC 8647 W-200 n n n n ABS DC C
M3099 DC 8647 W-87 n n n ABS DC C
M3230 DC 165J W-200 n ABS DC C
M3247 DC 030J W-87 n n ABS DC C
M3247 DC 030J W-86 n ABS DC C
M3247 DC 030J W-200 n n n n ABS DC C
M3280 DC 6522 W-104 n ABS DC C
M3518 DC 6569 W-200 n ABS DC C
M3520 DC 439M GLATT n n n ABS DC C
M3542 DC 6635 W-88 n n ABS DC C
M3558 DC 041U W-86 n n n n ABS DC C
M3569 DC 8176 W-88 n ABS DC C
M3662 DC 692Q W-200 n ABS DC C
M3730 DC 76M1 W-86 n ABS DC C
M3730 DC 76M1 W-88 n n n ABS DC C
M3789 DC 388U W-200 n ABS DC C
M3789 DC 388U W-87 n n n n ABS DC C
M3792 DC 103V W-86 n ABS DC C
M3792 DC 103V W-88 n n n ABS DC C
M3813 DC 426H GLATT n ABS HG P
M3813 DC 283X W-87 n ABS DC C
M3813 DC 283X GLATT n n n ABS DC C
M3817 DC 6522 W-104 n ABS DC C
M3820 DC 959N W-87 n ABS DC C
M3861 DC 791V W-105 n ABS DC C
M3861 DC 791V W-86 n n n n ABS DC C
M3866 DC 538H W-200 n n ABS DC C
M3879 DC 6635 W-88 n n ABS DC C
M3892 DC 69M5 W-86 n n ABS DC C
M3893 DC 69M8 W-87 n n ABS DC C
M3894 DC 27K7 W-111 n ABS DC E
M3964 DC 473X W-111 n n ABS DC E
M3965 DC 958N W-88 n ABS DC C
M4025 DC 655L GLATT n ABS DC C
M4222 DC 950V GLATT n ABS DC C
M4269 DC 6968 W-105 n n ABS DC C
M4269 DC 6968 W-87 n ABS DC C
M4269 DC 6968 W-86 n n ABS DC C
M4289 DC 958X GLATT n n ABS DC C
268
270
257
269
269
252
250
250
250
262
262
258
263
250
268
264
267
267
257
257
251
251
229
255
255
262
271
267
267
261
263
264
264
255
260
271
262
271
264
264
264
271
K –
P
123
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation122 unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M4289 DC 958X P7145 n n ABS DC C
M4394 DC 904X W-105 n n ABS DC C
M4431 DC 03L0 W-86 n n ABS DC C
M4438 DC 185J W-87 n n ABS DC C
M4438 DC 185J W-88 n n n ABS DC C
M4438 DC 47K2 GLATT n ABS HG P
M4451 DC 965X GLATT n ABS DC C
M4462 DC 656W W-86 n n n n ABS DC C
M4862 DC 19L6 W-105 n ABS DC C
M4867 DC 16J7 W-105 n n ABS DC C
M4867 DC 16J7 W-86 n n n ABS DC C
M4867 DC 16J7 W-87 n n ABS DC C
M4894 DC 69M6 W-86 n ABS DC C
M4894 DC 69M6 W-87 n ABS DC C
M516 DC 703Q W-86 n ABS DC C
M516 DC 703Q W-200 n ABS DC C
M516 DC 703Q W-87 n n n ABS DC C
M516 DC 703Q n n n ABS DC C
M587 DC 708N W-200 n ABS DC C
M587 DC 708N W-87 n n n n ABS DC C
M6037 DC 65K2 W-111 n n ABS DC E
M6046 DC 72M1 W-111 n n n ABS DC E
M6047 DC 70M1 W-111 n n ABS DC E
M6048 DC 283X W-87 n ABS DC C
M6048 DC 283X GLATT n n n ABS DC C
M6050 DC 65K3 W-111 n n n n ABS DC E
M6052 DC 53J7 W-200 n ABS DC C
M6053 DC 72M8 W-111 n ABS DC E
M6054 DC 72M5 W-111 n n ABS DC E
M6055 DC 72M6 W-111 n n n ABS DC E
M6061 DC 361H W-106 n ABS DC C
M6061 DC 361H GLATT n n n ABS DC C
M6061 DC 46P8 GLATT n ABS HG P
M6065 DC 72M2 W-86 n ABS DC C
M6066 DC 72M3 W-86 n ABS DC C
M807 DC 31J4 W-105 n ABS DC C
M807 DC 31J4 W-86 n n ABS DC C
M911 DC 356Q GLATT n ABS DC C
M976 DC 506W W-105 n ABS DC C
W-88
271
270
250
253
253
229
271
262
253
253
253
253
264
264
265
265
265
265
265
265
262
266
265
255
255
262
261
266
266
266
257
257
229
266
266
256
256
257
260
IsoroyKaindl 2015
Döllken-Kanten passend zu | Döllken Edgebands to match
Kaindl 2015PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1101 AT DC 88N4 W-111 n ABS DC E
1101 AW DC 49W4 P7145 n ABS DC E
1101 BS SF 79B2 W-87 n n ABS UNI C
1101 PE SF 79B2 W-200 n n ABS UNI C
1101 SM SF 79B2 GLATT n n ABS UNI C
1106 GL100 DC 263V GLATT n n n ABS HG P
1570 BS SF 4693 W-87 n n ABS UNI C
1570 GL100 DC 37V1 GLATT n n ABS HG P
1570 SU DC 38V9 W-88 n ABS DC E
17005 BS SF 87A4 W-87 n ABS UNI C
17005 GL100 DC 858Y GLATT n n n ABS HG P
20216 BS SF 1086 W-87 n n ABS UNI C
20240 NM SF 10C9 W-86 n ABS UNI C
20241 NM SF 85B9 W-86 n ABS UNI C
20244 NM SF 11C0 W-86 n ABS UNI C
20245 NM SF 23C9 W-86 n ABS UNI C
20551 NM SF 42B9 W-86 n ABS UNI C
2109 BS SF 5854 W-87 n n ABS UNI C
2112 PE SF 77B9 W-200 n n ABS UNI C
2125 PE SF 79B6 W-200 n ABS UNI C
2134 PE SF 87B7 W-200 n ABS UNI C
2149 PE SF 5908 W-200 n n n ABS UNI C
2162 PE SF 288B W-200 n n ABS UNI C
2165 PE SF 157A W-200 n n n ABS UNI C
2166 DP DC 49W6 LEDER n ABS UNI/L E
2166 PE SF 85A4 W-200 n n ABS UNI C
2171 PE SF 0179 W-200 n n n ABS UNI C
2190 AT DC 07L5 W-111 n n ABS DC E
2190 GL100 DC 319V GLATT n n n ABS HG P
2190 PE SF 0110 W-200 n n n n n ABS UNI C
2191 PE SF 157A W-200 n n n ABS UNI C
24230 BS SF 94A7 W-87 n ABS UNI C
2507 BS SF 80B4 W-87 n n ABS UNI C
2507 GL100 DC 20P5 GLATT n ABS HG P
2507 SU DC 28V0 W-88 n ABS DC E
2507 UM DC 12V8 GLATT n ABS UNI/L C
2514 PE SF 202C W-200 n ABS UNI C
2541 PE SF 1085 W-200 n n n ABS UNI C
25519 BS SF 18C3 W-87 n ABS UNI C
26299 BS SF 10C6 W-87 n ABS UNI C
26577 BS SF 12C3 W-87 n ABS UNI C
26687 NM SF 10C8 W-86 n ABS UNI C
269
260
245
245
245
229
242
229
257
246
231
239
239
245
239
240
242
243
245
245
246
243
241
240
236
245
236
251
229
236
240
246
245
228
255
236
240
238
240
239
239
239
K –
P
124 125unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
27008 BS SF 10C4 W-87 n ABS UNI C
27010 BS SF 11C8 W-87 n n ABS UNI C
27018 BS SF 12C5 W-87 n n ABS UNI C
27018 DP DC 35W8 LEDER n ABS UNI/L E
27018 GL100 DC 81L3 GLATT n ABS HG P
27018 SU DC 24W9 W-88 n ABS DC E
27018 UM DC 24W8 GLATT n ABS UNI/L E
27039 BS SF 99A3 W-87 n ABS UNI C
27045 BS SF 86B4 W-87 n n ABS UNI C
27045 GL100 DC 56J2 GLATT n ABS HG P
27045 SU DC 44V4 W-88 n ABS DC E
27045 UM DC 15V1 GLATT n ABS UNI/L C
27046 BS SF 13C1 W-87 n ABS UNI C
27049 BS SF 11C2 W-87 n n ABS UNI C
27049 DP DC 49W5 LEDER n ABS UNI/L E
27049 UM DC 12V6 GLATT n ABS UNI/L C
27060 BS SF 12C7 W-87 n n ABS UNI C
27060 DP DC 35W9 LEDER n ABS UNI/L E
27080 BS SF 12C6 W-87 n ABS UNI C
27121 PE SF 261D W-200 n n ABS UNI C
27123 NM SF 11C9 W-86 n ABS UNI C
27165 BS SF 76B3 W-87 n ABS UNI C
27166 BS SF 85A2 W-87 n ABS UNI C
27166 SU DC 37V3 W-88 n ABS DC E
27166 UM DC 10V4 GLATT n ABS UNI/L C
27167 BS SF 84A6 W-87 n ABS UNI C
27175 BS SF 88B0 W-87 n ABS UNI C
27178 BS SF 61A7 W-87 n ABS UNI C
27179 BS SF 659B W-87 n ABS UNI C
27180 BS SF 88B1 W-87 n ABS UNI C
27181 PE SF 203E W-200 n ABS UNI C
27190 BS SF 40A1 W-87 n n n ABS UNI C
27191 PE SF 65A8 W-200 n ABS UNI C
27193 PE SF 84A8 W-200 n ABS UNI C
28031 NM SF 12C0 W-86 n ABS UNI C
28536 BS SF 43B2 W-87 n ABS UNI C
28984 BS SF 49A4 W-87 n ABS UNI C
3306 BS DC 03P4 W-87 n n ABS DC C
3375 BS DC 703Q W-87 n n n ABS DC C
3379 BS DC 069U W-87 n ABS DC C
3381 PR DC 36K7 W-88 n n ABS DC C
3391 BS DC 316N W-87 n n ABS DC C
239
239
239
236
231
254
236
246
246
230
259
236
239
239
236
236
239
236
239
240
239
245
245
257
236
245
246
244
245
246
240
241
245
245
239
242
243
250
265
251
257
256
Kaindl 2015
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
3396 PR DC 656Y W-88 n ABS DC C
34032 SV DC 36V9 W-224 n ABS DC C
34033 SV DC 75U1 W-224 n ABS DC C
34034 SV DC 29V7 W-224 n ABS DC C
34038 AT DC 86P2 W-111 n n ABS DC E
34047 NM DC 34W3 W-86 n ABS DC E
34055 SU DC 75U2 W-88 n ABS DC C
34056 SU DC 44V6 W-88 n ABS DC E
34092 SV DC 25W3 W-224 n ABS DC C
34136 RV DC 09V5 W-79 n ABS DC E
34137 RV DC 98Q2 W-79 n ABS DC C
34138 RV DC 09V9 W-79 n ABS DC E
34139 RV DC 45V3 W-79 n n ABS DC E
34140 RV DC 09V1 W-79 n n ABS DC E
34141 RV DC 41U2 W-79 n ABS DC C
34217 RV DC 34W4 W-79 n ABS DC E
34227 SU DC 40W3 W-88 n ABS DC E
34308 AT DC 36V2 W-111 n ABS DC E
34313 SV DC 25W4 W-224 n ABS DC C
34321 DP DC 36W0 LEDER n ABS DC E
34323 SU DC 36W6 W-88 n ABS DC E
3440 BS DC 246K W-87 n ABS DC C
37307 PR DC 04K8 W-88 n n ABS DC E
37489 BS DC 33W7 W-87 n ABS DC C
37511 PR DC 75U6 W-88 n ABS DC C
37648 AT DC 72M1 W-111 n n n ABS DC E
37651 AT DC 41V0 W-111 n ABS DC E
37706 NM DC 13P6 W-86 n ABS DC E
37710 BS DC 363V W-87 n ABS DC C
37713 PR DC 253U W-88 n n ABS DC C
37717 AT DC 39L8 W-111 n n ABS DC E
37718 AT DC 42N5 W-111 n n ABS DC E
37727 SE DC 45V2 W-224 n ABS DC E
37728 SE DC 29V5 W-224 n n ABS DC E
37729 SE DC 05V8 W-224 n ABS DC E
37737 NM DC 75U8 W-86 n ABS DC C
37740 NM DC 53U6 W-86 n ABS DC E
37744 AT DC 13P3 W-111 n n ABS DC E
37745 AT DC 92P8 W-111 n ABS DC E
37746 AT DC 98J3 W-111 n ABS DC E
37750 BS DC 089W W-87 n n ABS DC C
37755 BS DC 33W8 W-87 n ABS DC C
262
257
267
255
269
256
267
259
254
251
272
251
259
251
258
256
258
257
254
257
257
254
250
256
267
266
258
252
257
254
258
258
259
255
250
267
261
252
271
271
251
256
K –
P
126 127unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
37762 BS DC 283X W-87 n ABS DC C
37769 SU DC 44V8 W-88 n ABS DC E
37771 BS DC 69M6 W-87 n ABS DC C
37776 NM DC 703Q W-86 n ABS DC C
37777 AT DC 75U9 W-111 n ABS DC E
37782 BS DC 92P1 W-87 n ABS DC C
37829 SU DC 25W2 W-88 n ABS DC E
37855 AW DC 43W6 P7145 n ABS DC E
37965 SU DC 45V1 W-88 n n ABS DC E
37967 SU DC 45V4 W-88 n n ABS DC E
3876 BS DC 8978 W-87 n ABS DC C
38932 PR DC 37V8 W-88 n n ABS DC E
38995 AT DC 25W0 W-111 n ABS DC E
39345 BS DC 10V0 W-87 n n ABS DC C
54046* PE DC 33W5 W-200 n ABS DC E
5853* PE DC 8580 W-200 n ABS DC E
5855* PE DC 33W6 W-200 n ABS DC E
5881* PE DC 18U5 W-200 n ABS DC C
5881* PE DC 18U5 W-200 n ABS DC E
K4324 SE DC 25W8 W-224 n ABS DC E
K4325 AW DC 40W1 P7145 n ABS DC E
K4326 AW DC 39W9 P7145 n ABS DC E
K4327 NM DC 25W1 W-86 n ABS DC E
K4328 AW DC 49W7 P7145 n ABS DC E
K4329 AW DC 40W4 P7145 n ABS DC E
K4330 RC DC 34W5 W-102 n ABS DC E
K4331 RC DC 55W1 W-102 n ABS DC E
K4332 RC DC 34W6 W-102 n ABS DC E
K4333 AW DC 39W8 P7145 n ABS DC E
K4334 AW DC 43W7 P7145 n ABS DC E
K4335 NM DC 33W9 W-86 n ABS DC E
K4336 NM DC 34W0 W-86 n ABS DC E
K4337 AW DC 40W0 P7145 n ABS DC E
K4340 RM DC 25W5 P7145 n ABS DC C
K4341 RM DC 25W6 P7145 n ABS DC C
K4342 RM DC 25W7 P7145 n n ABS DC E
K4343 NM DC 34W1 W-86 n ABS DC E
K4344 BS DC 34W2 W-87 n ABS DC C
K4347 AT DC 35W3 W-111 n ABS DC E
255
259
264
265
267
271
254
258
259
259
270
257
254
251
256
268
256
253
253
254
258
258
254
260
258
256
261
256
258
258
256
256
258
254
254
254
256
256
257
Kaindl 2015Kastamnonu Entegre
Döllken-Kanten passend zu | Döllken Edgebands to match
Kastamonu EntegrePlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
A303 DC 064K W-200 n n ABS DC C
A304 DC 569P W-87 n n ABS DC C
A304 DC 569P W-200 n ABS DC C
A316 DC 363V W-86 n n ABS DC C
A316 DC 363V W-87 n ABS DC C
A318 DC 148J W-105 n n n n ABS DC C
A333 DC 148J W-105 n n n n ABS DC C
A336 DC 708N W-200 n ABS DC C
A336 DC 708N W-87 n n n n ABS DC C
A340 DC 381N W-105 n n ABS DC C
A348 DC 7855 W-105 n ABS DC C
A349 DC 727L W-200 n n ABS DC C
A351 DC 727L W-200 n n ABS DC C
A352 DC 694L W-200 n ABS DC C
A353 DC 116V P7166 n n ABS DC C
A353 DC 116V W-200 n ABS DC C
A361 DC 363V W-86 n n ABS DC C
A361 DC 363V W-87 n ABS DC C
A364 DC 041U W-86 n n n n ABS DC C
A365 DC 352Q W-88 n n ABS DC C
A365 DC 352Q W-200 n ABS DC C
A368 DC 488Y W-105 n ABS DC C
A368 DC 488Y W-87 n ABS DC C
A370 DC 913L W-87 n n n ABS DC C
D101 SF 4693 W-87 n n ABS UNI C
D101 SF 4693 W-101 n n n ABS UNI C
D101 SF 4693 W-200 n n n n ABS UNI C
D101 SF 4693 GLATT n n n n ABS UNI C
D101 SF 4693 W-86 n n n n ABS UNI C
D101 SF 4693 W-88 n n ABS UNI C
D102 SF 1138 W-200 n n n ABS UNI C
D104 SF 5971 W-200 n n n n ABS UNI C
D104 SF 5971 W-224 n n ABS UNI C
D106 SF 5992 W-200 n n n n n ABS UNI C
D106 SF 5992 W-224 n n ABS UNI C
D107 SF 0110 W-101 n n ABS UNI C
D107 SF 0110 W-102 n ABS UNI C
D107 SF 0110 W-86 n ABS UNI C
D107 SF 0110 W-200 n n n n n ABS UNI C
D107 SF 0110 GLATT n n n ABS UNI C
D107 SF 0110 W-105 n n n ABS UNI C
D108 SF 482B P7166 n ABS UNI C
251
261
261
257
257
252
252
265
265
257
267
266
266
264
252
252
257
257
250
256
256
260
260
270
242
242
242
242
242
242
239
244
244
244
244
236
236
236
236
236
236
242
K –
P
129
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation128 unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D116 DC 502L GLATT n n n ABS DC E
D117 SF 5395 W-87 n n ABS UNI C
D117 SF 5395 W-200 n n n n n ABS UNI C
D122 SF 6208 W-200 n n n n ABS UNI C
D122 SF 6208 W-86 n n n n ABS UNI C
260
243
243
244
244
Kastamnonu EntegreKronospan 2013
Döllken-Kanten passend zu | Döllken Edgebands to match
Kronospan 2013PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0004 SM SF 6444 GLATT n n ABS UNI C
0045 BS DC 359J W-87 n ABS DC C
0101 BS SF 6346 W-87 n n n ABS UNI C
0101 PE SF 6346 W-200 n n n n n ABS UNI C
0101 SM SF 6346 GLATT n n n n n ABS UNI C
0110 PE SF 6444 W-200 n n n ABS UNI C
0110 SM SF 6444 GLATT n n ABS UNI C
0112 PE SF 49B7 W-200 n n n ABS UNI C
0113 PE SF 6444 W-200 n n n ABS UNI C
0113 SM SF 6444 GLATT n n ABS UNI C
0121 PE SF 533A W-200 n ABS UNI C
0125 PE SF 903B W-200 n ABS UNI C
0132 MG DC 103W GLATT n ABS HG P
0132 PE SF 0595 W-200 n n ABS UNI C
0134 PE SF 511A W-200 n n ABS UNI C
0149 PE SF 5908 W-200 n n n ABS UNI C
0162 PE SF 089A W-200 n n n ABS UNI C
0164 MG DC 93Q0 GLATT n ABS HG P
0164 PE SF 1402 W-200 n n n n ABS UNI C
0171 MG DC 51K1 GLATT n ABS HG P
0171 PE SF 0179 W-200 n n n ABS UNI C
0190 GL DC 015R GLATT n n 3D DC P
0190 MG DC 319V GLATT n n n ABS HG P
0190 PE SF 0110 W-200 n n n n n ABS UNI C
0190 SN DC 07L5 W-111 n n ABS DC E
0191 MG DC 963V GLATT n ABS HG P
0191 PE SF 1878 W-200 n n n n ABS UNI C
0197 PE SF 6211 W-200 n n ABS UNI C
0344 PR DC 963N W-88 n ABS DC C
0375 BS DC 8437 W-200 n n n ABS DC C
0381 PR DC 399W W-105 n ABS DC C
0396 PR DC 17U9 W-105 n ABS DC C
0514 MG DC 944U GLATT n ABS HG P
0514 PE SF 836B W-87 n n n ABS UNI C
0515 PE SF 658B W-200 n ABS UNI C
0522 PE SF 6414 W-200 n n n ABS UNI C
0540 PE SF 3311 W-200 n n n ABS UNI C
0551 PE SF 42B9 W-200 n ABS UNI C
0564 PE SF 49B8 W-200 n ABS UNI C
0637 BS DC 440U W-87 n ABS DC C
0729 BS DC 488Y W-87 n ABS DC C
0757 PR DC 204J W-224 n n n n ABS DC C
245
257
244
244
244
245
245
243
245
245
243
246
228
237
243
243
238
231
239
230
236
250
229
236
251
232
240
244
271
268
258
253
232
245
245
245
241
242
243
258
260
254
K –
P
130 131unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0851 PE DC 01U3 W-200 n ABS DC C
0854 SU DC 913L W-87 n n n ABS DC C
0859 PE DC 797K W-200 n n ABS DC E
0876 BS DC 179K W-105 n n n ABS DC C
0881 PE DC 18U5 W-200 n ABS DC C
0881 PE DC 18U5 W-200 n ABS DC E
1625 BS DC 01U0 W-87 n ABS DC C
1700 PE SF 45B3 W-200 n n ABS UNI C
1738 BS DC 6629 W-86 n n n ABS DC C
1764 BS DC 01U1 W-87 n ABS DC C
1783 BS DC 154V W-86 n n n ABS DC C
1792 BS DC 708N W-87 n n n n ABS DC C
1795 BS DC 654L GLATT n ABS DC C
3167 SN DC 79M8 W-111 n ABS DC E
4298 SU DC 40V8 W-86 n n ABS DC E
4299 SU DC 66V5 W-86 n n ABS DC E
5310 MG DC 01U4 GLATT n ABS HG P
5311 MG DC 94M0 GLATT n ABS HG P
5500 SU DC 00Q1 W-86 n ABS DC C
5501 SN DC 82Q2 W-111 n ABS DC E
5502 SN DC 82Q3 W-111 n ABS DC E
5503 SN DC 18U0 W-111 n ABS DC E
5504 SU DC 89N0 W-102 n ABS DC E
5515 BS SF 42B5 W-87 n ABS UNI C
5515 MG DC 01U5 GLATT n ABS HG P
5516 ML DC 50Q7 W-79 n ABS DC E
5516 PE DC 50Q7 W-200 n ABS DC E
5517 MG DC 105W GLATT n ABS HG P
5517 PE SF 1086 W-200 n n n ABS UNI C
5519 BS SF 169C W-87 n n ABS UNI C
5519 MG DC 72N1 GLATT n ABS HG P
5527 SN DC 82Q4 W-111 n n ABS DC E
5528 SU SF 5373 W-200 n n n ABS UNI C
5529 SN DC 90Q2 W-111 n ABS DC E
5530 SN DC 18U1 W-111 n ABS DC E
5981 BS SF 57B9 W-87 n n n ABS UNI C
5982 BS SF 6107 W-200 n ABS UNI C
5984 BS SF 303E W-87 n n ABS UNI C
7031 PE SF 1047 W-200 n ABS UNI C
7045 SU SF 6208 W-86 n n n n ABS UNI C
7113 BS SF 447C W-200 n n ABS UNI C
7113 MG DC 92Q9 GLATT n ABS HG P
250
270
267
253
253
253
250
242
263
250
252
265
262
267
258
263
228
232
250
268
268
253
270
241
228
260
260
228
239
240
231
268
243
270
253
243
244
241
238
244
242
231
Kronospan 2013
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
7123 BS SF 0707 W-86 n n n ABS UNI C
7123 MG DC 407W GLATT n ABS HG P
7166 BS SF 076C W-200 n ABS UNI C
7167 MG DC 89Q2 GLATT n ABS HG P
7167 SU SF 84A6 W-200 n ABS UNI C
7174 BS SF 49B9 W-87 n ABS UNI C
7176 BS SF 057D W-87 n ABS UNI C
7179 BS SF 666A W-200 n n ABS UNI C
7180 BS SF 071B W-87 n ABS UNI C
7184 BS SF 42B8 W-87 n ABS UNI C
7186 BS SF 62A5 W-87 n ABS UNI C
7190 BS SF 40A1 W-87 n n n ABS UNI C
7191 BS SF 65A8 W-87 n ABS UNI C
7935 MG DC 71L5 GLATT n ABS HG P
7935 SU DC 66L7 W-86 n ABS DC C
7937 BS DC 67N4 W-87 n n n ABS DC C
7965 SU DC 45V1 W-88 n n ABS DC E
8069 BS DC 82Q7 W-87 n ABS DC C
8069 SP DC 06N7 W-88 n ABS DC E
8100 SM SF 4693 GLATT n n n n ABS UNI C
8195 BS DC 89L8 W-87 n ABS DC C
8195 SP DC 03P6 W-88 n ABS DC E
8197 SN DC 13W0 W-111 n ABS DC E
8203 BS DC 58P5 W-87 n ABS DC C
8203 SP DC 80Q8 W-88 n ABS DC E
8312 ML DC 97L5 W-79 n ABS DC E
8313 ML DC 90Q1 W-79 n ABS DC E
8348 ML DC 92M4 W-79 n ABS DC E
8348 PE DC 92M4 W-200 n ABS DC E
8349 PE DC 72M4 W-200 n ABS DC C
8361 SN DC 01U2 W-111 n ABS DC E
8362 SN DC 70M1 W-111 n n ABS DC E
8409 SN DC 18U3 W-111 n ABS DC E
8410 SN DC 18U4 W-111 n ABS DC E
8413 SM DC 09J7 W-86 n ABS DC E
8417 ML DC 90Q0 W-79 n ABS DC E
8425 BS DC 87N4 W-87 n ABS DC C
8431 SN DC 50M7 W-79 n ABS DC E
8448 SU DC 83Q8 W-86 n ABS DC C
8503 BS DC 87N8 W-86 n n ABS DC E
8508 SN DC 13P3 W-111 n n ABS DC E
8509 SN DC 14M0 W-111 n ABS DC E
238
229
238
231
245
243
237
245
238
242
244
241
245
231
263
264
259
268
251
242
270
250
252
262
267
271
270
271
271
266
250
265
253
253
251
270
269
260
268
269
252
252
K –
P
132 133
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
8510 BS SF 0110 W-200 n n n n n ABS UNI C
8511 BS SF 437E W-200 n n ABS UNI C
8533 BS SF 066D W-200 n ABS UNI C
8533 MG DC 84Q0 GLATT n ABS HG P
8534 BS SF 41B9 W-87 n ABS UNI C
8536 BS SF 43B2 W-87 n ABS UNI C
8539 SN DC 629N W-111 n n n ABS DC E
8545 BS DC 67N7 W-87 n ABS DC C
8547 SN DC 18U2 W-111 n ABS DC E
8548 SN DC 65M1 W-79 n n ABS DC E
8601 BS DC 49L1 W-87 n ABS DC C
8601 MG DC 010Y GLATT n 3D 3D P
8681 GL DC 858Y GLATT n n n ABS HG P
8685 MG DC 263V GLATT n n n ABS HG P
8685 SN SF 08A8 W-102 n n n n ABS UNI C
8686 BS SF 6082 W-200 n n ABS UNI C
8754 MG DC 89Q9 GLATT n ABS HG P
8754 PE DC 656W W-86 n n n n ABS DC C
8888 SU DC 64K8 W-86 n ABS DC C
8912 BS DC 081H W-87 n ABS DC C
8953 BS DC 488Y W-87 n ABS DC C
8971 BS DC 67N2 W-87 n ABS DC C
8971 MG DC 46P8 GLATT n ABS HG P
8984 BS SF 49A4 W-87 n ABS UNI C
8995 SN DC 20U7 W-111 n ABS DC E
8996 PE SF 44B5 W-200 n ABS UNI C
9247 BS DC 582X W-87 n ABS DC C
9285 SN DC 20U8 W-111 n ABS DC E
9345 BS DC 694L W-200 n ABS DC C
9411 BS DC 525V W-87 n ABS DC C
9569 PE SF 388E W-200 n n n ABS UNI C
9614 BS DC 20U6 W-87 n ABS DC C
9755 SN DC 20U9 W-111 n ABS DC E
9763 BS DC 82Q5 W-87 n ABS DC C
9775 BS DC 10K0 W-105 n n ABS DC C
K001 PW DC 66V4 W-224 n n ABS DC E
K002 PW DC 66V3 W-224 n n ABS DC E
K003 PW DC 52W9 W-224 n ABS DC E
K004 PW DC 52W8 W-224 n ABS DC E
K005 PW DC 40V7 W-224 n n ABS DC E
K006 PW DC 65V9 W-224 n n ABS DC E
K007 PW DC 66V0 W-224 n n ABS DC E
236
242
238
231
241
242
262
264
253
263
260
222
231
229
238
244
231
262
262
251
260
264
229
243
254
242
261
254
264
260
241
254
254
268
251
263
263
261
261
258
263
263
Kronospan 2013
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
K008 PW DC 65V7 W-224 n n ABS DC E
K009 PW DC 65V8 W-224 n n ABS DC E
K010 SN DC 65V5 W-111 n n ABS DC E
K011 SN DC 65V6 W-111 n n ABS DC E
P101 AG DC 498V GLATT n n n ABS HG P
P164 AG DC 984Y GLATT n ABS HG P
P190 AG DC 319V GLATT n n n ABS HG P
P522 AG DC 83Q9 GLATT n ABS HG P
263
263
263
263
230
232
229
231
K –
P
134 135unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Kronoswiss
Döllken-Kanten passend zu | Döllken Edgebands to match
KronoswissPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D1202 DC 316N W-200 n ABS DC C
D1202 DC 316N W-87 n n ABS DC C
D1240 DC 91N4 P7145 n ABS DC E
D1243 DC 396N W-86 n ABS DC C
D1251 DC 167K P7166 n n n n ABS DC C
D1252 DC 040V W-86 n n ABS DC C
D1274 DC 89N1 P7166 n ABS DC C
D1308 DC 40J7 GLATT n ABS HG P
D1308 DC 502L GLATT n n n ABS DC E
D1333 DC 02L3 W-86 n ABS DC C
D1343 NP DC 87V6 W-224 n ABS DC E
D1350 DC 6629 W-86 n n n ABS DC C
D1350 DC 6629 P7145 n n n ABS DC C
D1350 DC 6629 GLATT n n n ABS DC C
D1352 DC 584J W-200 n ABS DC C
D1353 DC 185L W-86 n n ABS DC C
D1357 DC 584J W-200 n ABS DC C
D1361 DC 381N W-105 n n ABS DC C
D1373 DC 6522 W-104 n ABS DC C
D1378 DC 10K0 W-105 n n ABS DC C
D1417 DC 102V W-86 n ABS DC C
D1421 DC 8978 W-88 n ABS DC C
D1421 DC 8978 W-87 n ABS DC C
D1422 DC 999J W-105 n n ABS DC C
D1422 DC 999J W-87 n ABS DC C
D1431 DC 517J W-87 n n ABS DC C
D1431 DC 517J W-200 n ABS DC C
D1432 DC 439M GLATT n n n ABS DC C
D1435 DC 7855 W-105 n ABS DC C
D1477 DC 91N6 P7145 n ABS DC E
D1480 DC 517J W-87 n n ABS DC C
D1480 DC 517J W-200 n ABS DC C
D1485 DC 88J7 W-111 n n n n ABS DC E
D1489 DC 012J W-200 n ABS DC C
D1772 DC 146X W-88 n ABS DC C
D1777 DC 71M1 W-79 n ABS DC E
D1783 DC 954M W-105 n n ABS DC C
D1783 DC 954M W-200 n ABS DC C
D1783 DC 954M W-87 n n n n ABS DC C
D1785 DC 86N1 W-102 n n ABS DC E
D2042 CE DC 29W7 W-111 n ABS DC E
D2043 CE DC 29W6 W-111 n ABS DC E
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D2210 DC 102V W-86 n ABS DC C
D2216 DC 822W W-86 n n n ABS DC C
D2240 DC 913P GLATT n ABS DC C
D2240 DC 913P W-86 n n n n ABS DC C
D225 DC 359J W-88 n ABS DC C
D225 DC 359J W-87 n ABS DC C
D2253 DC 51N6 W-86 n ABS DC E
D2254 DC 12L0 W-79 n ABS DC E
D2254 DC 12L0 W-86 n ABS DC C
D2254 DC 12L0 W-86 n ABS DC E
D2254 DC 12L0 W-86 n n ABS DC E
D2265 DC 283X W-87 n ABS DC C
D2265 DC 283X GLATT n n n ABS DC C
D227 DC 064J W-200 n ABS DC C
D2284 DC 927H W-200 n n ABS DC C
D2285 DC 185J W-87 n n ABS DC C
D2285 DC 185J W-88 n n n ABS DC C
D2291 DC 865V W-86 n n ABS DC C
D2293 DC 061J GLATT n ABS DC C
D2337 NP DC 92V9 W-224 n ABS DC E
D2337 DC 191Q W-200 n ABS DC C
D2341 DC 13L8 W-86 n n n ABS DC C
D2343 DC 16J9 W-86 n ABS DC C
D2366 DC 041U W-86 n n n n ABS DC C
D2367 DC 958X GLATT n n ABS DC C
D2367 DC 958X P7145 n n ABS DC C
D2382 DC 595N W-111 n ABS DC E
D2382 DC 595N W-200 n ABS DC E
D2383 DC 629N W-87 n ABS DC E
D2383 DC 629N W-105 n ABS DC C
D2383 DC 629N W-111 n n n ABS DC E
D2440 DC 308Y W-86 n n ABS DC C
D2441 DC 308Y W-86 n n ABS DC C
D2451 DC 12L8 W-86 n n ABS DC C
D2481 DC 506W W-105 n ABS DC C
D2490 DC 67N0 W-87 n ABS DC C
D2491 DC 364P W-86 n n ABS DC C
D2492 DC 375Y W-200 n ABS DC C
D2500 SF 1086 W-87 n n ABS UNI C
D2500 SF 1086 W-200 n n n ABS UNI C
D2506 NP DC 92V8 W-224 n ABS DC E
D2506 DC 14L3 SL111 n ABS DC E
256
256
270
258
253
250
270
229
260
250
269
263
263
263
261
253
261
257
262
251
251
270
270
272
272
260
260
258
267
270
260
260
269
250
252
265
271
271
271
269
255
255
251
268
270
270
257
257
260
252
252
252
252
255
255
251
271
253
253
269
250
271
253
252
253
250
271
271
262
262
262
262
262
255
255
252
260
264
257
257
239
239
271
252
K –
P
136 137unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Kronoswiss
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D2506 DC 14L3 W-111 n n n ABS DC E
D2513 DC 42N6 W-87 n ABS DC C
D2523 DC 89N0 W-102 n ABS DC E
D2531 DC 18J9 W-102 n n n ABS DC E
D2533 DC 174H P7145 n ABS DC C
D2541 DC 791V W-105 n ABS DC C
D2541 DC 791V W-86 n n n n ABS DC C
D2542 DC 69M9 W-87 n ABS DC C
D2546 DC 246K W-200 n n ABS DC C
D2546 DC 246K W-87 n ABS DC C
D2566 DC 88N2 P7166 n n ABS DC C
D2567 DC 87N9 P7145 n n ABS DC E
D2568 DC 65M2 W-200 n n ABS DC E
D2568 DC 65M2 W-101 n ABS DC E
D2576 DC 112W W-105 n n ABS DC C
D2577 DC 083V P7166 n ABS DC C
D2578 DC 87N8 W-86 n n ABS DC E
D2621 DC 87N6 W-102 n n ABS DC E
D2634 DC 8580 GLATT n ABS DC E
D2634 DC 8580 W-200 n ABS DC E
D2644 SF 178A W-200 n ABS UNI C
D2682 DC 468H W-105 n ABS DC C
D2693 NP DC 958N W-88 n ABS DC C
D2831 DC 852Y W-200 n ABS DC E
D2940 DC 87N5 W-111 n ABS DC E
D302 DC 108J W-200 n n ABS DC C
D311 DC 06M7 W-88 n ABS DC C
D319 DC 6640 W-200 n n ABS DC C
D321 DC 552L W-105 n ABS DC C
D326 DC 551P W-110 n n ABS DC C
D327 DC 385L W-200 n ABS DC C
D327 DC 385L W-86 n n n n ABS DC C
D333 DC 7977 W-105 n n n ABS DC C
D339 DC 33J0 W-200 n ABS DC C
D340 DC 407L W-105 n ABS DC C
D344 DC 661L W-105 n ABS DC C
D348 DC 8152 W-88 n n ABS DC C
D349 DC 04L4 W-111 n n n ABS DC E
D351 DC 202X W-102 n n n ABS DC E
D375 DC 703Q W-86 n ABS DC C
D375 DC 703Q W-200 n ABS DC C
D375 DC 703Q W-87 n n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D375 DC 703Q W-88 n n n ABS DC C
D381 DC 103V W-86 n ABS DC C
D381 DC 103V W-88 n n n ABS DC C
D382 DC 7191 W-88 n ABS DC C
D388 DC 165J W-200 n ABS DC C
D391 DC 030J W-87 n n ABS DC C
D391 DC 030J W-86 n ABS DC C
D391 DC 030J W-200 n n n n ABS DC C
D396 DC 560J W-105 n n ABS DC C
D4099 CC DC 91V9 W-88 n ABS DC C
D4100 CS DC 90V3 W-88 n ABS DC C
D4101 CS DC 92V4 W-88 n ABS DC C
D4102 CS DC 66V4 W-224 n n ABS DC E
D4103 CS DC 86U4 W-88 n ABS DC E
D4104 CS DC 92V5 W-88 n ABS DC C
D4105 CC DC 92V1 W-88 n ABS DC C
D4106 CC DC 92V2 W-88 n ABS DC E
D4107 CE DC 92V3 W-111 n ABS DC E
D4108 CE DC 29W8 W-111 n ABS DC E
D4110 CC DC 92V0 W-88 n ABS DC C
D420 DC 694L W-200 n ABS DC C
D4204 CH DC 21W4 W-79 n ABS DC C
D4205 CH DC 91V8 W-79 n ABS DC E
D4206 CH DC 91V7 W-79 n ABS DC E
D4207 CH DC 91V6 W-79 n ABS DC E
D447 DC 167K P7166 n n n n ABS DC C
D451 DC 7876 W-200 n n ABS DC C
D494 DC 60Q0 P7166 n ABS DC C
D495 DC 382L W-200 n ABS DC C
D601 DC 552L W-105 n ABS DC C
D620 DC 8677 W-200 n n ABS DC C
D620 DC 8677 W-106 n ABS DC C
D631 DC 584J W-200 n ABS DC C
D645 DC 7977 W-105 n n n ABS DC C
D647 DC 494J W-105 n ABS DC C
D651 DC 552L W-105 n ABS DC C
D6540 DC 16P9 GLATT n ABS DC E
D6595 DC 45M8 W-111 n ABS DC E
D6596 DC 79N6 GLATT n ABS DC E
D6597 DC 22N2 GLATT n ABS DC C
D665 DC 535N W-200 n n ABS DC C
D688 DC 552L W-105 n ABS DC C
252
258
270
253
253
267
267
264
254
254
269
269
263
263
251
251
269
269
268
268
240
259
271
268
269
251
251
263
261
261
257
257
267
256
258
263
268
250
272
265
265
265
265
251
251
265
252
250
250
250
261
270
270
271
263
269
271
271
271
271
255
271
264
254
270
270
270
253
267
262
257
261
269
269
261
267
260
261
253
259
267
254
261
261
K –
P
139unverbindliche Empfehlung | non-binding recommendation138
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Kronoswiss
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D701 DC 7239 W-104 n n ABS DC C
D704 DC 6635 W-88 n n ABS DC C
D722 DC 959N W-87 n ABS DC C
D727 DC 6629 W-86 n n n ABS DC C
D727 DC 6629 P7145 n n n ABS DC C
D727 DC 6629 GLATT n n n ABS DC C
D740 DC 52K1 W-88 n ABS DC C
D741 DC 905X W-200 n n n ABS DC C
D751 DC 19L8 W-224 n n n ABS DC C
D752 DC 570U W-105 n ABS DC C
D776 DC 887Y GLATT n ABS DC C
D7935 DC 156W W-87 n n n ABS DC C
D7937 DC 67N4 W-87 n n n ABS DC C
D824 DC 06M7 W-88 n ABS DC C
D8311 DC 7239 W-104 n n ABS DC C
D8333 DC 246K W-200 n n ABS DC C
D8333 DC 246K W-87 n ABS DC C
D8339 DC 879H W-105 n n n ABS DC C
D8425 DC 87N4 W-87 n ABS DC C
D853 DC 8525 W-200 n n n n n ABS DC E
D854 DC 410K W-105 n n n n ABS DC C
D856 DC 061J GLATT n ABS DC C
D869 DC 450V W-86 n n ABS DC C
D928 DC 32L2 W-86 n n n n ABS DC E
D991 DC 596J W-200 n n ABS DC C
K100 SF 6346 W-200 n n n n n ABS UNI C
K100 SF 6346 GLATT n n n n n ABS UNI C
K100 SF 6346 W-101 n n n ABS UNI C
K100 SF 6346 W-87 n n n ABS UNI C
K100 SF 6346 W-105 n n n n ABS UNI C
K100 SF 6346 W-102 n n n ABS UNI C
K100 SF 6346 W-224 n n ABS UNI C
K101 DC 88N4 W-111 n ABS DC E
K101 DC 263 GLATT n n n ABS HG P
K101 SF 6346 W-200 n n n n n ABS UNI C
K101 SF 6346 GLATT n n n n n ABS UNI C
K101 SF 6346 W-101 n n n ABS UNI C
K101 SF 6346 W-87 n n n ABS UNI C
K101 SF 6346 W-105 n n n n ABS UNI C
K101 SF 6346 W-102 n n n ABS UNI C
K101 SF 6346 W-224 n n ABS UNI C
K101 DC 706H W-79 n n n ABS DC E
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
K101 DC 19R8 GLATT n 3D 3D 2in1 P
K110 SF 6444 W-200 n n n ABS UNI C
K110 SF 6444 GLATT n n ABS UNI C
P213 SF 4693 W-87 n n ABS UNI C
P213 SF 4693 W-101 n n n ABS UNI C
P213 SF 4693 W-200 n n n n ABS UNI C
P213 SF 4693 GLATT n n n n ABS UNI C
P213 SF 4693 W-86 n n n n ABS UNI C
P213 SF 4693 W-88 n n ABS UNI C
U106 SF 6346 W-200 n n n n n ABS UNI C
U106 SF 6346 GLATT n n n n n ABS UNI C
U106 SF 6346 W-101 n n n ABS UNI C
U106 SF 6346 W-87 n n n ABS UNI C
U106 SF 6346 W-105 n n n n ABS UNI C
U106 SF 6346 W-102 n n n ABS UNI C
U106 SF 6346 W-224 n n ABS UNI C
U109 SF 5854 GLATT n ABS UNI C
U109 SF 5854 W-87 n n ABS UNI C
U109 SF 5854 W-200 n n n ABS UNI C
U112 SF 0547 W-200 n n n ABS UNI C
U115 SF 6008 W-200 n n ABS UNI C
U117 SF 066D W-200 n ABS UNI C
U119 SF 6208 W-200 n n n n ABS UNI C
U119 SF 6208 W-86 n n n n ABS UNI C
U120 SF 1283 W-200 n n ABS UNI C
U121 SF 119A W-200 n ABS UNI C
U123 SF 666A W-200 n n ABS UNI C
U125 DC 37R6 GLATT n 3D 3D 2in1 P
U125 SF 0436 W-200 n n ABS UNI C
U128 SF 743B W-87 n n n ABS UNI C
U1300 SF 1330 W-200 n n n ABS UNI C
U1301 SF 6107 W-200 n ABS UNI C
U1302 SF 6119 W-200 n n ABS UNI C
U131 SF 0180 W-200 n ABS UNI C
U1331 SF 756A W-200 n ABS UNI C
U136 SF 454C W-200 n ABS UNI C
U140 PE SF 351B W-200 n ABS UNI C
U148 DC 71R2 GLATT n 3D 3D 2in1 P
U148 DC 570V GLATT n ABS HG P
U148 SF 1067 W-200 n n n ABS UNI C
U153 SF 0597 W-200 n n ABS UNI C
U155 SF 386A W-200 n n ABS UNI C
266
263
271
263
263
263
260
270
253
261
269
252
264
251
266
254
254
269
269
268
258
250
259
256
262
244
244
244
244
244
244
244
269
229
244
244
244
244
244
244
244
265
222
245
245
242
242
242
242
242
242
244
244
244
244
244
244
244
243
243
243
237
244
238
244
244
239
239
245
223
237
245
239
244
244
236
245
242
241
223
230
238
237
241
K –
P
140 141
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Kronoswiss
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U161 SF 6445 W-200 n n ABS UNI C
U162 DC 35R1 GLATT n 3D 3D 2in1 P
U162 DC 91N1 W-111 n ABS DC E
U162 DC 950Y GLATT n ABS HG P
U162 SF 089A W-200 n n n ABS UNI C
U164 SF 1402 W-200 n n n n ABS UNI C
U165 SF 157A W-200 n n n ABS UNI C
U171 SF 0179 W-200 n n n ABS UNI C
U171 SF 0179 W-87 n n n n ABS UNI C
U179 SF 1330 W-200 n n n ABS UNI C
U181 PE SF 581B W-200 n ABS UNI C
U185 SF 6267 W-200 n ABS UNI C
U185 SF 6267 W-86 n n n ABS UNI C
U190 DC 19R6 GLATT n 3D 3D 2in1 P
U190 SF 0110 W-101 n n ABS UNI C
U190 SF 0110 W-102 n ABS UNI C
U190 SF 0110 W-86 n ABS UNI C
U190 DC 319V GLATT n n n ABS HG P
U190 SF 0110 W-200 n n n n n ABS UNI C
U190 SF 0110 GLATT n n n ABS UNI C
U190 SF 0110 W-105 n n n ABS UNI C
U190 DC 707H W-79 n n ABS DC E
U190 DC 07L5 W-111 n n ABS DC E
U191 DC 25R0 GLATT n 3D 3D 2in1 P
U191 SF 1878 GLATT n n ABS UNI C
U191 DC 31L2 GLATT n ABS HG P
U191 SF 1878 W-200 n n n n ABS UNI C
U191 SF 1878 W-101 n n n ABS UNI C
U191 SF 1878 W-87 n n n n ABS UNI C
U191 SF 1878 W-224 n n ABS UNI C
U2500 PE SF 404C W-200 n n ABS UNI C
U2504 SF 580D W-87 n n n ABS UNI C
U2505 SF 091E W-86 n n n ABS UNI C
U2507 PE SF 789C W-200 n n n ABS UNI C
U2509 SF 169C W-87 n n ABS UNI C
U2509 SF 169C W-200 n n n ABS UNI C
U2510 SF 864A W-87 n n n ABS UNI C
U2511 SF 335C W-200 n ABS UNI C
U2512 PE SF 73B4 W-200 n ABS UNI C
U2643 SF 04B6 W-87 n n n ABS UNI C
U2644 PE SF 960E W-200 n n n ABS UNI C
U2645 SF 261D W-200 n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U504 SF 6414 W-200 n n n ABS UNI C
U514 DC 24R8 GLATT n 3D 3D 2in1 P
U514 SF 836B W-224 n ABS UNI C
U514 DC 944U GLATT n ABS HG P
U514 SF 836B W-87 n n n ABS UNI C
U515 SF 1138 W-200 n n n ABS UNI C
U520 SF 561D W-200 n n n ABS UNI C
U522 SF 6119 W-200 n n ABS UNI C
U540 SF 3311 W-200 n n n ABS UNI C
U540 SF 3311 W-87 n n n n ABS UNI C
U566 SF 6346 W-200 n n n n n ABS UNI C
U566 SF 6346 GLATT n n n n n ABS UNI C
U566 SF 6346 W-101 n n n ABS UNI C
U566 SF 6346 W-87 n n n ABS UNI C
U566 SF 6346 W-105 n n n n ABS UNI C
U566 SF 6346 W-102 n n n ABS UNI C
U566 SF 6346 W-224 n n ABS UNI C
U569 SF 0547 W-200 n n n ABS UNI C
U575 SF 1072 W-200 n n ABS UNI C
U7104 PE SF 481B W-200 n ABS UNI C
U7110 SF 447C W-200 n n ABS UNI C
VI02 DC 297R WAVE n n 3D DC P
VI03 DC 18P8 GLATT n n ABS ALU-Folie P
VI07 DC 18P8 GLATT n n ABS ALU-Folie P
VI08 DC 18P8 GLATT n n ABS ALU-Folie P
VI09 DC 18P8 GLATT n n ABS ALU-Folie P
245
223
270
232
238
239
240
236
236
239
243
244
244
222
236
236
236
229
236
236
236
265
251
222
240
229
240
240
240
240
241
243
238
245
240
240
246
241
245
237
246
240
245
222
245
232
245
239
243
244
241
241
244
244
244
244
244
244
244
237
238
242
242
255
228
228
228
228
K –
P
142 143unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Lamicolor
Döllken-Kanten passend zu | Döllken Edgebands to match
LamicolorPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1022 SF 1167 W-200 n ABS UNI C
1023 SF 0179 W-200 n n n ABS UNI C
1023 SF 0179 W-87 n n n n ABS UNI C
1027 SF 922B W-200 n n ABS UNI C
1054 SF 0597 W-200 n n ABS UNI C
1076 SF 130D W-87 n n n ABS UNI C
1077 SF 482B P7166 n ABS UNI C
1107 SF 1167 W-200 n ABS UNI C
1141 SF 311D W-200 n n n ABS UNI C
1142 SF 5026 W-200 n ABS UNI C
1183 SF 404C W-200 n n ABS UNI C
1183 SF 404C W-87 n n ABS UNI C
1329 SF 1086 W-87 n n ABS UNI C
1329 SF 1086 W-200 n n n ABS UNI C
1365 SF 4861 W-101 n n n ABS UNI C
1365 SF 4861 W-200 n n n ABS UNI C
1544 SF 743B W-87 n n n ABS UNI C
1595 SF 336C W-200 n n n ABS UNI C
1597 SF 6082 W-200 n n ABS UNI C
201 SF 6346 W-200 n n n n n ABS UNI C
201 SF 6346 GLATT n n n n n ABS UNI C
201 SF 6346 W-101 n n n ABS UNI C
201 SF 6346 W-87 n n n ABS UNI C
201 SF 6346 W-105 n n n n ABS UNI C
201 SF 6346 W-102 n n n ABS UNI C
201 SF 6346 W-224 n n ABS UNI C
202 SF 0110 W-101 n n ABS UNI C
202 SF 0110 W-102 n ABS UNI C
202 SF 0110 W-86 n ABS UNI C
202 SF 0110 W-200 n n n n n ABS UNI C
202 SF 0110 GLATT n n n ABS UNI C
202 SF 0110 W-105 n n n ABS UNI C
204 SF 6346 W-200 n n n n n ABS UNI C
204 SF 6346 GLATT n n n n n ABS UNI C
204 SF 6346 W-101 n n n ABS UNI C
204 SF 6346 W-87 n n n ABS UNI C
204 SF 6346 W-105 n n n n ABS UNI C
204 SF 6346 W-102 n n n ABS UNI C
204 SF 6346 W-224 n n ABS UNI C
206 DC 502L GLATT n n n ABS DC E
217 SF 1083 W-200 n n ABS UNI C
620 DC 784J W-104 n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
620 DC 784J W-88 n ABS DC C
662 DC 204J W-105 n ABS DC C
662 DC 204J W-224 n n n n ABS DC C
669 DC 7977 W-105 n n n ABS DC C
686 DC 8176 W-88 n ABS DC C
693 DC 569P W-87 n n ABS DC C
693 DC 569P W-200 n ABS DC C
698 DC 535N W-200 n n ABS DC C
701 DC 037J W-88 n ABS DC C
701 DC 037J GLATT n ABS DC C
702 DC 8428 W-200 n n ABS DC C
721 DC 148J W-105 n n n n ABS DC C
727 DC 703Q W-86 n ABS DC C
727 DC 703Q W-200 n ABS DC C
727 DC 703Q W-87 n n n ABS DC C
727 DC 703Q W-88 n n n ABS DC C
729 DC 727L W-200 n n ABS DC C
738 DC 7008 W-88 n n n ABS DC C
738 DC 7008 W-87 n n ABS DC C
740 DC 913P GLATT n ABS DC C
740 DC 913P W-86 n n n n ABS DC C
754 SF 4693 W-87 n n ABS UNI C
754 SF 4693 W-101 n n n ABS UNI C
754 SF 4693 W-200 n n n n ABS UNI C
754 SF 4693 GLATT n n n n ABS UNI C
754 SF 4693 W-86 n n n n ABS UNI C
754 SF 4693 W-88 n n ABS UNI C
917 DC 081J P7166 n ABS DC C
239
236
236
246
237
239
242
239
241
243
241
241
239
239
242
242
245
241
244
244
244
244
244
244
244
244
236
236
236
236
236
236
244
244
244
244
244
244
244
260
238
267
267
254
254
267
268
261
261
261
250
250
268
252
265
265
265
265
266
265
265
270
270
242
242
242
242
242
242
251
K –
P
144 145unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Liri
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
023 SF 4693 W-87 n n ABS UNI C
023 SF 4693 W-101 n n n ABS UNI C
023 SF 4693 W-200 n n n n ABS UNI C
023 SF 4693 GLATT n n n n ABS UNI C
023 SF 4693 W-86 n n n n ABS UNI C
023 SF 4693 W-88 n n ABS UNI C
027 SF 6444 W-200 n n n ABS UNI C
027 SF 6444 GLATT n n ABS UNI C
032 SF 6211 W-200 n n ABS UNI C
032 SF 6211 W-87 n n n ABS UNI C
051 SF 580D W-87 n n n ABS UNI C
052 SF 1402 W-200 n n n n ABS UNI C
057 SF 0188 W-200 n ABS UNI C
066 DC 204J W-105 n ABS DC C
066 DC 204J W-224 n n n n ABS DC C
092 SF 4678 W-200 n n ABS UNI C
095 SF 617A W-200 n ABS UNI C
161 SF 119A W-200 n ABS UNI C
166 SF 680A W-200 n n n ABS UNI C
180 SF 5854 GLATT n ABS UNI C
180 SF 5854 W-87 n n ABS UNI C
180 SF 5854 W-200 n n n ABS UNI C
302 SF 0110 W-101 n n ABS UNI C
302 SF 0110 W-102 n ABS UNI C
302 SF 0110 W-86 n ABS UNI C
302 SF 0110 W-200 n n n n n ABS UNI C
302 SF 0110 GLATT n n n ABS UNI C
302 SF 0110 W-105 n n n ABS UNI C
351 SF 1083 W-200 n n ABS UNI C
421 SF 6082 W-200 n n ABS UNI C
450 SF 0179 W-200 n n n ABS UNI C
450 SF 0179 W-87 n n n n ABS UNI C
458 SF 386A W-200 n n ABS UNI C
581 SF 6346 W-200 n n n n n ABS UNI C
581 SF 6346 GLATT n n n n n ABS UNI C
581 SF 6346 W-101 n n n ABS UNI C
581 SF 6346 W-87 n n n ABS UNI C
581 SF 6346 W-105 n n n n ABS UNI C
581 SF 6346 W-102 n n n ABS UNI C
581 SF 6346 W-224 n n ABS UNI C
590 SF 2319 W-200 n n ABS UNI C
605 SF 1086 W-87 n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
605 SF 1086 W-200 n n n ABS UNI C
632 DC 629N W-87 n ABS DC E
632 DC 629N W-105 n ABS DC C
632 DC 629N W-111 n n n ABS DC E
894 DC 535N W-200 n n ABS DC C
918 DC 216J W-87 n n ABS DC C
920 SF 6414 W-200 n n n ABS UNI C
A07 DC 703Q W-86 n ABS DC C
A07 DC 703Q W-200 n ABS DC C
A07 DC 703Q W-87 n n n ABS DC C
A07 DC 703Q W-88 n n n ABS DC C
A14 DC 8166 W-200 n n ABS DC C
A65 DC 8166 W-200 n n ABS DC C
A79 DC 216J W-87 n n ABS DC C
C01 DC 064J W-200 n ABS DC C
C17 DC 708N W-200 n ABS DC C
C17 DC 708N W-87 n n n n ABS DC C
C31 DC 021K W-88 n n ABS DC C
F23 DC 064K W-200 n n ABS DC C
F29 DC 6548 W-88 n n n ABS DC C
F33 DC 954M W-105 n n ABS DC C
F33 DC 954M W-200 n ABS DC C
F33 DC 954M W-87 n n n n ABS DC C
F34 DC 569P W-87 n n ABS DC C
F34 DC 569P W-200 n ABS DC C
G29 SF 6346 W-200 n n n n n ABS UNI C
G29 SF 6346 GLATT n n n n n ABS UNI C
G29 SF 6346 W-101 n n n ABS UNI C
G29 SF 6346 W-87 n n n ABS UNI C
G29 SF 6346 W-105 n n n n ABS UNI C
G29 SF 6346 W-102 n n n ABS UNI C
G29 SF 6346 W-224 n n ABS UNI C
N04 DC 148J W-105 n n n n ABS DC C
N26 DC 281P GLATT n ABS DC C
P47 DC 364P W-86 n n ABS DC C
U28 SF 4989 W-200 n n n ABS UNI C
U28 SF 4989 W-87 n n n ABS UNI C
U62 SF 511A W-200 n n ABS UNI C
U65 SF 0650 W-200 n ABS UNI C
U68 SF 234A W-200 n ABS UNI C
V10 SF 5847 W-200 n n n ABS UNI C
W42 DC 185L W-86 n n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
Liri
242
242
242
242
242
242
245
245
244
244
243
239
236
254
254
242
244
239
245
243
243
243
236
236
236
236
236
236
238
244
236
236
241
244
244
244
244
244
244
244
240
239
239
262
262
262
261
254
245
265
265
265
265
268
268
254
251
265
265
250
251
262
271
271
271
261
261
244
244
244
244
244
244
244
252
255
257
242
242
243
238
240
243
253
K –
P
146 147unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
LiriNCS
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
WB9 DC 359J W-88 n ABS DC C
WB9 DC 359J W-87 n ABS DC C
WC0 DC 216J W-87 n n ABS DC C
WG8 DC 359J W-88 n ABS DC C
WG8 DC 359J W-87 n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
NCSPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0580Y20R SF 0717 W-200 n ABS UNI C
1000 SF 0693 W-200 n n ABS UNI C
1005Y20R SF 6192 W-200 n ABS UNI C
1060Y SF 178A W-200 n ABS UNI C
1070Y70R SF 0187 W-200 n ABS UNI C
1500 SF 0693 W-200 n n ABS UNI C
1500 SF 157A W-200 n n n ABS UNI C
1580Y90R SF 5395 W-87 n n ABS UNI C
1580Y90R SF 5395 W-200 n n n n n ABS UNI C
2500 SF 4861 W-101 n n n ABS UNI C
2500 SF 4861 W-200 n n n ABS UNI C
3000 SF 6170 W-200 n n n n ABS UNI C
3060R SF 1067 W-200 n n n ABS UNI C
4000 SF 0184 W-200 n ABS UNI C
5040R70B SF 5847 W-200 n n n ABS UNI C
7500 SF 0711 W-200 n n n ABS UNI C
S0500N SF 4693 W-87 n n ABS UNI C
S0500N SF 4693 W-101 n n n ABS UNI C
S0500N SF 4693 W-200 n n n n ABS UNI C
S0500N SF 4693 GLATT n n n n ABS UNI C
S0500N SF 4693 W-86 n n n n ABS UNI C
S0500N SF 4693 W-88 n n ABS UNI C
S0502G SF 6444 W-200 n n n ABS UNI C
S0502G SF 6444 GLATT n n ABS UNI C
S0502G50Y SF 6346 W-200 n n n n n ABS UNI C
S0502G50Y SF 6346 GLATT n n n n n ABS UNI C
S0502G50Y SF 6346 W-101 n n n ABS UNI C
S0502G50Y SF 6346 W-87 n n n ABS UNI C
S0502G50Y SF 6346 W-105 n n n n ABS UNI C
S0502G50Y SF 6346 W-102 n n n ABS UNI C
S0502G50Y SF 6346 W-224 n n ABS UNI C
S0505G80Y SF 6287 W-200 n ABS UNI C
S0505Y10R SF 5854 GLATT n ABS UNI C
S0505Y10R SF 5854 W-87 n n ABS UNI C
S0505Y10R SF 5854 W-200 n n n ABS UNI C
S0510G10Y SF 5026 W-200 n ABS UNI C
S0520G20Y SF 617A W-200 n ABS UNI C
S0530Y10R SF 539B W-200 n n ABS UNI C
S0540G60Y SF 234A W-200 n ABS UNI C
S0540Y10R SF 086A W-200 n ABS UNI C
S0560G40Y SF 580D W-87 n n n ABS UNI C
S0570Y70R SF 578D W-87 n n n ABS UNI C
257
257
254
257
257
238
238
244
240
236
238
240
243
243
242
242
244
238
236
243
238
242
242
242
242
242
242
245
245
244
244
244
244
244
244
244
244
243
243
243
243
244
243
240
238
243
243
K –
P
148 149unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
NCS
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
S1002Y SF 2319 W-200 n n ABS UNI C
S1005Y SF 6107 W-200 n ABS UNI C
S1005Y10R SF 0650 W-200 n ABS UNI C
S1005Y40R SF 4989 W-200 n n n ABS UNI C
S1005Y40R SF 4989 W-87 n n n ABS UNI C
S1010Y10R SF 6414 W-200 n n n ABS UNI C
S1010Y30R SF 1138 W-200 n n n ABS UNI C
S1050G80Y SF 281D W-200 n n ABS UNI C
S1050Y20R SF 0188 W-200 n ABS UNI C
S1060Y10R SF 556B W-87 n n n ABS UNI C
S1070Y90R SF 447C W-200 n n ABS UNI C
S1500N SF 1878 GLATT n n ABS UNI C
S1500N SF 1878 W-200 n n n n ABS UNI C
S1500N SF 1878 W-101 n n n ABS UNI C
S1500N SF 1878 W-87 n n n n ABS UNI C
S1500N SF 1878 W-224 n n ABS UNI C
S1580Y90R SF 5395 W-87 n n ABS UNI C
S1580Y90R SF 5395 W-200 n n n n n ABS UNI C
S2005Y40R SF 6208 W-200 n n n n ABS UNI C
S2005Y40R SF 6208 W-86 n n n n ABS UNI C
S2060G80Y SF 311D W-200 n n n ABS UNI C
S2070Y70R SF 979C W-200 n ABS UNI C
S2500N SF 4861 W-101 n n n ABS UNI C
S2500N SF 4861 W-200 n n n ABS UNI C
S2570Y80R SF 194A W-87 n ABS UNI C
S3005Y50R SF 922B W-200 n n ABS UNI C
S3060R SF 304D W-87 n n n ABS UNI C
S3060R80B SF 0436 W-200 n n ABS UNI C
S3060R90B SF 130D W-87 n n n ABS UNI C
S3500N SF 6211 W-200 n n ABS UNI C
S3500N SF 6211 W-87 n n n ABS UNI C
S3502G SF 0184 W-200 n ABS UNI C
S4010Y50R SF 207C W-200 n n n ABS UNI C
S4500N SF 0179 W-200 n n n ABS UNI C
S4500N SF 0179 W-87 n n n n ABS UNI C
S5040B10G SF 750A W-87 n n ABS UNI C
S6010Y70R SF 336C W-200 n n n ABS UNI C
S6030R SF 583D W-200 n n ABS UNI C
S6502Y SF 100B W-200 n n ABS UNI C
S7010R30B SF 404D W-86 n n n ABS UNI C
S7020G SF 0597 W-200 n n ABS UNI C
S7502B SF 1402 W-200 n n n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
S8000N SF 4678 W-200 n n ABS UNI C
S8010Y10R SF 6082 W-200 n n ABS UNI C
S8500N SF 5992 W-200 n n n n n ABS UNI C
S8500N SF 5992 W-224 n n ABS UNI C
S8505Y20R SF 579D W-87 n n n ABS UNI C
S9000N SF 0110 W-101 n n ABS UNI C
S9000N SF 0110 W-102 n ABS UNI C
S9000N SF 0110 W-86 n ABS UNI C
S9000N SF 0110 W-200 n n n n n ABS UNI C
S9000N SF 0110 GLATT n n n ABS UNI C
S9000N SF 0110 W-105 n n n ABS UNI C
242
244
244
244
243
236
236
236
236
236
236
240
244
238
242
242
245
239
240
236
243
242
240
240
240
240
240
243
243
244
244
241
246
242
242
240
246
241
237
239
244
244
236
240
236
236
245
241
243
238
241
237
239
K –
P
150 151
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Niemann
Döllken-Kanten passend zu | Döllken Edgebands to match
NiemannPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D2285 DC 010Y GLATT n 3D 3D P
D2285 DC 16J7 W-105 n n ABS DC C
D2285 DC 16J7 W-86 n n n ABS DC C
D2285 DC 16J7 W-87 n n ABS DC C
D6793 DC 38P2 W-86 n n n ABS DC C
D8425 DC 87N4 W-87 n ABS DC C
D8935 DC 905X W-200 n n n ABS DC C
D8956 DC 69M6 W-86 n ABS DC C
D8956 DC 69M6 W-87 n ABS DC C
F489 DC 03J2 W-200 n ABS DC E
F509 DC 396H W-200 n ABS DC E
F509 DC 40J7 GLATT n ABS HG P
H3030 DC 361H W-106 n ABS DC C
H3030 DC 361H GLATT n n n ABS DC C
H3031 DC 010Y GLATT n 3D 3D P
H3031 DC 16J7 W-105 n n ABS DC C
H3031 DC 16J7 W-86 n n n ABS DC C
H3031 DC 16J7 W-87 n n ABS DC C
H3734 DC 656W W-86 n n n n ABS DC C
H424 DC 89N0 W-102 n ABS DC E
H576 DC 422H W-88 n ABS DC C
H690 DC 411X W-200 n ABS DC C
H690 DC 411X W-106 n ABS DC C
R5339 DC 399W W-105 n ABS DC C
R5339 DC 399W W-87 n ABS DC C
R5604 DC 337W W-105 n ABS DC C
R5604 DC 337W W-86 n n n ABS DC C
R5673 DC 861U W-200 n n n ABS DC C
U100 SF 5971 W-200 n n n n ABS UNI C
U100 SF 5971 W-224 n n ABS UNI C
U1027 SF 617E W-200 n ABS UNI C
U1027 SF 617E W-86 n n ABS UNI C
U1027 DC 498V GLATT n n n ABS HG P
U1027 SF 617E W-79 n n ABS UNI C
U1191 SF 457E W-224 n ABS UNI C
U1191 SF 457E W-200 n ABS UNI C
U1191 SF 457E W-86 n n n n ABS UNI C
U1191 SF 457E W-102 n n n ABS UNI C
U1200 SF 0110 W-101 n n ABS UNI C
U1200 SF 0110 W-102 n ABS UNI C
U1200 SF 0110 W-86 n ABS UNI C
U1200 DC 319V GLATT n n n ABS HG P
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U1200 SF 0110 W-200 n n n n n ABS UNI C
U1200 SF 0110 GLATT n n n ABS UNI C
U1200 SF 0110 W-105 n n n ABS UNI C
U1233 SF 4678 W-200 n n ABS UNI C
U1233 DC 31L5 GLATT n n ABS HG P
U1290 SF 288B W-200 n n ABS UNI C
U1379 SF 5854 GLATT n ABS UNI C
U1379 SF 5854 W-87 n n ABS UNI C
U1379 DC 325X GLATT n n ABS HG P
U1379 SF 5854 W-200 n n n ABS UNI C
U149 DC 570V GLATT n ABS HG P
U149 SF 5908 W-200 n n n ABS UNI C
U1603 DC 274V GLATT n ABS HG P
U1603 SF 612C W-200 n n n ABS UNI C
U164 SF 1402 W-200 n n n n ABS UNI C
U1688 SF 525E W-200 n n ABS UNI C
U1688 DC 686W GLATT n ABS HG P
U190 SF 0110 W-101 n n ABS UNI C
U190 SF 0110 W-102 n ABS UNI C
U190 SF 0110 W-86 n ABS UNI C
U190 DC 319V GLATT n n n ABS HG P
U190 SF 0110 W-200 n n n n n ABS UNI C
U190 SF 0110 GLATT n n n ABS UNI C
U190 SF 0110 W-105 n n n ABS UNI C
U1980 SF 897D W-200 n n ABS UNI C
U222 SF 6403 W-200 n n n n ABS UNI C
U285 SF 169C W-87 n n ABS UNI C
U285 SF 169C W-200 n n n ABS UNI C
U7031 SF 6287 W-200 n ABS UNI C
U7031 DC 325X GLATT n n ABS HG P
U741 SF 423C W-224 n ABS UNI C
U741 SF 423C W-86 n n n n ABS UNI C
U795 SF 201E W-87 n n n ABS UNI C
U8681 SF 617E W-200 n ABS UNI C
U8681 SF 617E W-86 n n ABS UNI C
U8681 DC 498V GLATT n n n ABS HG P
U8681 SF 617E W-79 n n ABS UNI C
UD72 SF 1085 W-200 n n n ABS UNI C
W400 DC 555Y GLATT n ABS HG P
W400 SF 6346 W-200 n n n n n ABS UNI C
W400 SF 6346 GLATT n n n n n ABS UNI C
W400 SF 6346 W-101 n n n ABS UNI C
222
253
253
253
257
269
270
264
264
250
257
229
257
257
222
253
253
253
262
270
258
258
258
258
258
256
256
268
244
244
244
244
230
244
242
242
242
242
236
236
236
229
236
236
236
242
229
241
243
243
229
243
230
243
229
244
239
243
231
236
236
236
229
236
236
236
246
244
240
240
244
229
241
241
240
244
244
230
244
238
230
244
244
244
K –
P
152 153unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
NiemannOrma
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
W400 SF 6346 W-87 n n n ABS UNI C
W400 SF 6346 W-105 n n n n ABS UNI C
W400 SF 6346 W-102 n n n ABS UNI C
W400 SF 6346 W-224 n n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
OrmaPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
ABANOZ DC 363V W-86 n n ABS DC C
ABANOZ DC 363V W-87 n ABS DC C
AÇIK AKÇAAG DC 283P GLATT n n ABS DC C
AÇIKKIRAZ DC 694L W-200 n ABS DC C
AKÇAAGAÇ DC 679K W-200 n ABS DC C
AKÇAAGAÇ DC 679K P7145 n n ABS DC C
ALABAMAKIRA DC 021K W-88 n n ABS DC C
ALMANMESE DC 784J W-104 n ABS DC C
ALMANMESE DC 784J W-88 n ABS DC C
ALPICEVIZ DC 135M W-200 n n n ABS DC C
ALTINKIRAZ DC 041U W-86 n n n n ABS DC C
AMERIKANCEV DC 535N W-200 n n ABS DC C
ARMUT DC 661L W-105 n ABS DC C
BARTINMESE DC 958X GLATT n n ABS DC C
BARTINMESE DC 958X P7145 n n ABS DC C
BORDO SF 1086 W-87 n n ABS UNI C
BORDO SF 1086 W-200 n n n ABS UNI C
EGIRDIRMESE DC 958N W-88 n ABS DC C
GRI SF 6241 W-101 n n ABS UNI C
GRI SF 6241 W-200 n n n ABS UNI C
HARELIMAUN DC 397J W-105 n n ABS DC C
KIRMIZI SF 5395 W-87 n n ABS UNI C
KIRMIZI SF 5395 W-200 n n n n n ABS UNI C
KIZILAKÇAAG DC 381N W-105 n n ABS DC C
KOYUKIRAZ DC 727L W-200 n n ABS DC C
MESE DC 913P GLATT n ABS DC C
MESE DC 913P W-86 n n n n ABS DC C
METALIKCEVI DC 135M W-200 n n n ABS DC C
METALIKGRI DC 952P W-200 n n n n n ABS DC E
NAPOLYONKIR DC 381N W-105 n n ABS DC C
ORMAERIK DC 16J9 W-86 n ABS DC C
ORMAKARAMEL SF 066D W-200 n ABS UNI C
ORMAMAVI SF 482B P7166 n ABS UNI C
OVACEVIZI DC 148J W-105 n n n n ABS DC C
PRATIKBEYAZ SF 1083 W-200 n n ABS UNI C
ROMACEVIZI DC 959N W-87 n ABS DC C
SIYAH SF 0110 W-101 n n ABS UNI C
SIYAH SF 0110 W-102 n ABS UNI C
SIYAH SF 0110 W-86 n ABS UNI C
SIYAH SF 0110 W-200 n n n n n ABS UNI C
SIYAH SF 0110 GLATT n n n ABS UNI C
SIYAH SF 0110 W-105 n n n ABS UNI C
244
244
244
244
257
257
255
264
264
264
250
267
267
252
250
261
263
271
271
239
239
271
244
244
258
243
243
257
266
270
270
252
271
257
253
238
242
252
238
271
236
236
236
236
236
236
K –
P
155
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation154 unverbindliche Empfehlung | non-binding recommendation
OrmaPfleiderer 2013 – 2016
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
SÜPERBEYAZ SF 4693 W-87 n n ABS UNI C
SÜPERBEYAZ SF 4693 W-101 n n n ABS UNI C
SÜPERBEYAZ SF 4693 W-200 n n n n ABS UNI C
SÜPERBEYAZ SF 4693 GLATT n n n n ABS UNI C
SÜPERBEYAZ SF 4693 W-86 n n n n ABS UNI C
SÜPERBEYAZ SF 4693 W-88 n n ABS UNI C
VANILYA SF 6107 W-200 n ABS UNI C
VIZONKREM SF 6208 W-200 n n n n ABS UNI C
VIZONKREM SF 6208 W-86 n n n n ABS UNI C
WENGE DC 410K W-105 n n n n ABS DC C
YABANARMUDU DC 708N W-200 n ABS DC C
YABANARMUDU DC 708N W-87 n n n n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
Pfleiderer 2013 – 2016PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
Alu1 DC 8580 GLATT n ABS DC E
Alu1 DC 8580 W-200 n ABS DC E
Alu1 DC 18P8 GLATT n n ABS ALU-Folie P
Alu1 DC 93Q1 GLATT n ABS HG P
Alu2 DC 702R GLATT n n 3D 3D P
Alu2 DC 93Q2 GLATT n ABS HG P
Edelstahl3 DC 819L W-86 n n ABS DC C
F04/015 DC 33N7 W-86 n ABS DC C
F04/038 DC 355Q GLATT n n ABS DC C
F04/054 DC 8166 W-200 n n ABS DC C
F06/158 ML DC 70Q8 W-86 n n ABS DC E
F06/159 DC 099V W-105 n ABS DC C
F06/159 DC 099V W-86 n n n ABS DC C
F06/160 DC 18L8 GLATT n n n n ABS DC C
F06/160 ML DC 46U0 W-86 n ABS DC E
F06/166 DC 67Q6 W-86 n ABS DC E
F06/171 DC 45L3 W-88 n n ABS DC C
F06/172 DC 459H W-200 n ABS DC C
F06/172 DC 459H W-88 n n ABS DC C
F06/180 DC 68Q6 W-111 n n ABS DC E
F06/182 DC 82P5 W-88 n ABS DC C
F06/183 DC 70Q3 W-88 n ABS DC C
F06/184 DC 70Q4 W-88 n ABS DC C
F06/185 DC 800Q W-105 n ABS DC C
F06/185 DC 800Q W-200 n n n ABS DC C
F06/186 DC 146X W-88 n ABS DC C
F06/187 DC 53J6 W-111 n n ABS DC E
F06/187 DC 90Q3 W-88 n ABS DC C
F10/034 DC 25M0 W-111 n n ABS DC E
F10/035 DC 98J4 W-111 n n ABS DC E
F13/001 DC 630K W-87 n ABS DC C
F14/014 DC 185L W-86 n n ABS DC C
F14/014 ML DC 46U3 W-86 n ABS DC E
F17/003 DC 31J4 W-105 n ABS DC C
F17/003 DC 31J4 W-86 n n ABS DC C
F17/008 DC 90M5 W-79 n n ABS DC E
F19/002 DC 38R8 GLATT n 3D 3D 2in1 P
F19/002 DC 731H GLATT n ABS HG P
F21/005 DC 283X W-87 n ABS DC C
F21/005 DC 426H GLATT n ABS HG P
F21/005 DC 283X GLATT n n n ABS DC C
F21/005 ML DC 46U2 W-86 n ABS DC E
242
242
242
242
242
242
244
244
244
258
265
265
268
268
228
231
223
232
268
256
257
268
265
251
251
253
259
264
259
259
259
264
268
265
265
267
267
252
261
270
254
271
262
253
260
256
256
270
223
231
255
229
255
259
K –
P
156 157unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Pfleiderer 2013 – 2016
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F21/007 DC 70Q9 W-86 n ABS DC C
F21001 DC 434H GLATT n ABS HG P
F21007 DC 010Y GLATT n 3D 3D P
F22/012 DC 33J8 W-105 n n ABS DC C
F22/012 ML DC 46U1 W-86 n ABS DC E
F22/013 DC 86J4 W-86 n n ABS DC E
F22/013 DC 86J4 W-86 n ABS DC C
F22/013 DC 86J4 W-86 n ABS DC E
F22/013 ML DC 45U8 W-86 n ABS DC E
F23/001 DC 70Q6 W-86 n ABS DC C
F26/019 DC 904X W-105 n n ABS DC C
F26/030 DC 17L9 W-88 n ABS DC C
F26/030 DC 17L9 W-87 n ABS DC C
F26/030 DC 17L9 W-86 n n n ABS DC C
F26/031 DC 41P1 W-88 n n ABS DC C
F29/007 DC 8176 W-88 n ABS DC C
F30/010 DC 67Q8 W-111 n ABS DC E
F30/011 DC 70Q7 W-111 n ABS DC E
F32/004 DC 74P5 W-111 n ABS DC E
F32/005 DC 52L1 W-111 n ABS DC E
F35/005 DC 7008 W-88 n n n ABS DC C
F35/005 DC 7008 W-87 n n ABS DC C
F37/009 DC 569P W-87 n n ABS DC C
F37/009 DC 569P W-200 n ABS DC C
F37/023 DC 7876 W-200 n n ABS DC C
F37/066 DC 19L6 W-105 n ABS DC C
F41/004 DC 70Q2 W-111 n n ABS DC E
F41/005 DC 468H W-105 n ABS DC C
F41/005 DC 52Q4 W-111 n n ABS DC E
F7223 DC 21J6 W-200 n ABS DC E
F7223 DC 54Q8 GLATT n ABS HG P
F7399 DC 70Q5 W-86 n ABS DC E
F7463 DC 09J7 W-86 n ABS DC E
F8008 DC 879L W-200 n n ABS DC E
F8110 DC 797K W-200 n n ABS DC E
F8110 DC 797K W-86 n ABS DC E
F8192 DC 88P1 W-87 n n ABS DC C
F8563 HG DC 45W3 GLATT n ABS HG P
F8563 MP DC 28N1 W-200 n n ABS DC E
F8582 DC 952P W-200 n n n n n ABS DC E
F8588 DC 007W GLATT n 3D 3D P
F8595 DC 735V W-200 n ABS DC E
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F8595 DC 735V W-200 n ABS DC C
F8812 DC 65M2 W-200 n n ABS DC E
F8812 DC 65M2 W-101 n ABS DC E
F8816 DC 274R GLATT n 3D 3D P
Kristall2 DC 427H GLATT n ABS HG P
Nizza3 DC 779H GLATT n ABS DC E
R4110 DC 30P1 W-249 n n ABS DC E
R4110 DC 30P1 W-87 n n ABS DC E
R4190 DC 67Q7 W-111 n ABS DC E
R4191 DC 99P0 W-111 n n n ABS DC E
R4192 DC 83N9 W-111 n n ABS DC E
R4194 DC 98N0 W-111 n n ABS DC E
R4211 DC 459H W-200 n ABS DC C
R4211 DC 459H W-88 n n ABS DC C
R4221 DC 185J W-87 n n ABS DC C
R4221 DC 185J W-88 n n n ABS DC C
R4223 DC 50M7 W-79 n ABS DC E
R4223 DC 86Q1 W-86 n ABS DC C
R4262 DC 15N2 W-111 n n n ABS DC E
R4264 DC 88L2 W-111 n ABS DC E
R4272 DC 472X W-102 n n ABS DC E
R4283 DC 69P8 W-249 n n ABS DC E
R4283 DC 69P8 W-87 n ABS DC E
R4284 DC 96N8 W-88 n ABS DC C
R4285 RU DC 45W4 W-111 n ABS DC E
R4289 DC 61P1 W-111 n ABS DC E
R4317 RU DC 45W5 W-111 n ABS DC E
R4366 DC 67M4 W-86 n ABS DC C
R4371 DC 12L0 W-79 n ABS DC E
R4371 DC 12L0 W-86 n ABS DC C
R4371 DC 12L0 W-86 n ABS DC E
R4371 DC 12L0 W-86 n n ABS DC E
R4400 DC 112W W-105 n n ABS DC C
R4415 RU DC 50W8 W-111 n ABS DC E
R4524 DC 31L6 W-111 n n n n ABS DC E
R4525 DC 93K4 W-111 n n ABS DC E
R4531 DC 67Q9 W-111 n ABS DC E
R4558 RU DC 46W1 W-111 n ABS DC E
R4559 RU DC 45W6 W-111 n ABS DC E
R4564 RU DC 16P1 W-111 n n ABS DC E
R4601 DC 8677 W-200 n n ABS DC C
R4601 DC 8677 W-106 n ABS DC C
265
229
222
256
259
269
269
269
259
265
270
253
253
253
258
268
264
265
266
260
265
265
261
261
267
253
265
259
260
254
230
265
251
269
267
267
270
229
255
271
222
266
266
263
263
222
229
267
255
255
264
272
268
272
259
259
253
253
260
269
252
269
260
265
265
271
259
262
259
264
252
252
252
252
251
260
256
271
264
260
259
253
269
269
K –
P
159
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation158 unverbindliche Empfehlung | non-binding recommendation
Pfleiderer 2013 – 2016
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
R4801 DC 422H W-88 n ABS DC C
R4816 MO DC 03P6 W-88 n ABS DC E
R4822 MO DC 45W7 W-88 n ABS DC C
R4867 DC 656W W-86 n n n n ABS DC C
R4889 DC 55L4 W-86 n n ABS DC C
R4896 DC 473X W-111 n n ABS DC E
R5028 DC 18J9 W-102 n n n ABS DC E
R5151 DC 396N W-86 n ABS DC C
R5177 DC 103V W-86 n ABS DC C
R5177 DC 103V W-88 n n n ABS DC C
R5184 DC 283P GLATT n n ABS DC C
R5195 DC 785J W-104 n n ABS DC C
R5243 DC 703Q W-86 n ABS DC C
R5243 DC 703Q W-200 n ABS DC C
R5243 DC 703Q W-87 n n n ABS DC C
R5243 DC 703Q W-88 n n n ABS DC C
R5311 DC 954M W-105 n n ABS DC C
R5311 DC 954M W-200 n ABS DC C
R5311 DC 954M W-87 n n n n ABS DC C
R5320 DC 030J W-87 n n ABS DC C
R5320 DC 030J W-86 n ABS DC C
R5320 DC 030J W-200 n n n n ABS DC C
R5338 DC 315K W-200 n ABS DC C
R5360 DC 6640 W-200 n n ABS DC C
R5410 DC 02L3 W-86 n ABS DC C
R5411 DC 040V W-86 n n ABS DC C
R5413 DC 356Q GLATT n ABS DC C
R5447 DC 115W W-86 n n ABS DC C
R5464 DC 447X W-86 n n ABS DC C
R5479 DC 357Q GLATT n ABS DC C
R5604 DC 375Y W-200 n ABS DC C
R5611 DC 27K7 W-111 n ABS DC E
R5612 DC 57N9 W-111 n n ABS DC E
R5613 DC 72M1 W-111 n n n ABS DC E
R5622 DC 79N6 GLATT n ABS DC E
R5630 DC 082P W-86 n ABS DC C
R5643 DC 49L9 W-86 n ABS DC C
R5672 DC 15J4 W-111 n n n ABS DC E
R5673 DC 861U W-200 n n n ABS DC C
R5681 DC 041U W-86 n n n n ABS DC C
R5690 DC 03J3 W-105 n ABS DC C
R5690 DC 03J3 W-87 n n n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
R5692 DC 608Y W-224 n n n ABS DC C
R5693 DC 364P W-86 n n ABS DC C
R5804 DC 185J W-87 n n ABS DC C
R5804 DC 185J W-88 n n n ABS DC C
R5822 ML DC 45W8 W-86 n ABS DC C
R5829 ML DC 46W0 W-86 n ABS DC E
R5830 VV DC 45W9 W-200 n ABS DC E
SE1 DC 18J4 GLATT n ABS HG P
Span140 DC 263V GLATT n n n ABS HG P
Span140 SF 6346 W-200 n n n n n ABS UNI C
Span140 SF 6346 GLATT n n n n n ABS UNI C
Span140 SF 6346 W-101 n n n ABS UNI C
Span140 SF 6346 W-87 n n n ABS UNI C
Span140 SF 6346 W-105 n n n n ABS UNI C
Span140 SF 6346 W-102 n n n ABS UNI C
Span140 SF 6346 W-224 n n ABS UNI C
Span140 DC 706H W-79 n n n ABS DC E
SR204 SF 42A5 W-200 n ABS UNI C
SR209 SF 4693 W-87 n n ABS UNI C
SR209 DC 18J4 GLATT n ABS HG P
SR209 SF 4693 W-101 n n n ABS UNI C
SR209 SF 4693 W-200 n n n n ABS UNI C
SR209 SF 4693 GLATT n n n n ABS UNI C
SR209 SF 4693 W-86 n n n n ABS UNI C
SR209 SF 4693 W-88 n n ABS UNI C
U007 SF 0110 W-101 n n ABS UNI C
U007 SF 0110 W-102 n ABS UNI C
U007 SF 0110 W-86 n ABS UNI C
U007 DC 319V GLATT n n n ABS HG P
U007 SF 0110 W-200 n n n n n ABS UNI C
U007 SF 0110 GLATT n n n ABS UNI C
U007 SF 0110 W-105 n n n ABS UNI C
U007 DC 707H W-79 n n ABS DC E
U010 SF 315E W-200 n n ABS UNI C
U011 SF 4678 W-200 n n ABS UNI C
U018 SF 1082 W-200 n n ABS UNI C
U027 SF 335C W-200 n ABS UNI C
U027 DC 354Y GLATT n ABS HG P
U031 SF 1086 W-87 n n ABS UNI C
U031 SF 1086 W-200 n n n ABS UNI C
U032 SF 0595 W-200 n n ABS UNI C
U035 SF 1083 W-200 n n ABS UNI C
258
250
259
262
261
260
253
258
251
251
255
267
265
265
265
265
271
271
271
250
250
250
256
263
250
250
257
252
259
257
257
255
261
266
267
251
260
252
268
250
250
250
262
257
253
253
259
260
259
228
229
244
244
244
244
244
244
244
265
241
242
228
242
242
242
242
242
236
236
236
229
236
236
236
265
241
242
238
241
229
239
239
237
238
K –
P
161unverbindliche Empfehlung | non-binding recommendation160
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Pfleiderer 2013 – 2016
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U051 SF 979C W-200 n ABS UNI C
U054 DC 274V GLATT n ABS HG P
U054 SF 612C W-200 n n n ABS UNI C
U056 SF 36B4 W-200 n n ABS UNI C
U059 SF 0193 W-200 n n n ABS UNI C
U067 SF 5949 W-200 n ABS UNI C
U068 SF 0197 W-200 n ABS UNI C
U074 SF 309E W-200 n n n ABS UNI C
U079 SF 482E W-200 n n ABS UNI C
U087 SF 18A9 W-200 n ABS UNI C
U089 SF 03B2 W-200 n ABS UNI C
U090 SF 483E W-200 n ABS UNI C
U091 SF 484E W-200 n ABS UNI C
U092 SF 485E W-200 n n ABS UNI C
U1010 SF 437E W-200 n n ABS UNI C
U1010 SF 437E W-86 n n n ABS UNI C
U1011 SF 70A2 W-200 n n ABS UNI C
U102 SF 617E W-200 n ABS UNI C
U102 SF 617E W-86 n n ABS UNI C
U102 DC 498V GLATT n n n ABS HG P
U102 SF 617E W-79 n n ABS UNI C
U102 ML DC 45U9 W-86 n ABS DC C
U1026 DC 263V GLATT n n n ABS HG P
U1026 SF 6346 W-200 n n n n n ABS UNI C
U1026 SF 6346 GLATT n n n n n ABS UNI C
U1026 SF 6346 W-101 n n n ABS UNI C
U1026 SF 6346 W-87 n n n ABS UNI C
U1026 SF 6346 W-105 n n n n ABS UNI C
U1026 SF 6346 W-102 n n n ABS UNI C
U1026 SF 6346 W-224 n n ABS UNI C
U1027 DC 858Y GLATT n n n ABS HG P
U1027 SF 091E W-86 n n n ABS UNI C
U107 SF 316E W-200 n ABS UNI C
U108 SF 207E W-200 n ABS UNI C
U109 SF 281D W-200 n n ABS UNI C
U110 DC 514W GLATT n n ABS HG P
U110 SF 311D W-200 n n n ABS UNI C
U1102 SF 636D W-200 n n n n ABS UNI C
U1114 SF 483E W-200 n ABS UNI C
U1115 SF 387A W-200 n n ABS UNI C
U1131 SF 0693 W-200 n n ABS UNI C
U114 SF 086A W-200 n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U115 SF 0180 W-200 n ABS UNI C
U116 SF 388E W-200 n n n ABS UNI C
U1179 SF 3311 W-200 n n n ABS UNI C
U1179 SF 3311 W-87 n n n n ABS UNI C
U1184 SF 922B W-200 n n ABS UNI C
U1184 DC 899V GLATT n ABS HG P
U1188 SF 1878 GLATT n n ABS UNI C
U1188 DC 963V GLATT n ABS HG P
U1188 SF 1878 W-200 n n n n ABS UNI C
U1188 SF 1878 W-101 n n n ABS UNI C
U1188 SF 1878 W-87 n n n n ABS UNI C
U1188 SF 1878 W-224 n n ABS UNI C
U1191 SF 457E W-224 n ABS UNI C
U1191 SF 457E W-200 n ABS UNI C
U1191 SF 457E W-86 n n n n ABS UNI C
U1191 SF 457E W-102 n n n ABS UNI C
U1193 SF 201E W-87 n n n ABS UNI C
U1200 SF 0110 W-101 n n ABS UNI C
U1200 SF 0110 W-102 n ABS UNI C
U1200 SF 0110 W-86 n ABS UNI C
U1200 SF 0110 W-200 n n n n n ABS UNI C
U1200 SF 0110 GLATT n n n ABS UNI C
U1200 SF 0110 W-105 n n n ABS UNI C
U1211 SF 494E W-200 n n ABS UNI C
U1233 SF 4678 W-200 n n ABS UNI C
U1257 SF 0711 W-200 n n n ABS UNI C
U1290 SF 288B W-200 n n ABS UNI C
U130 DC 932P GLATT n ABS HG P
U130 SF 1085 W-200 n n n ABS UNI C
U1303 SF 6287 W-200 n ABS UNI C
U1306 SF 5854 GLATT n ABS UNI C
U1306 SF 5854 W-87 n n ABS UNI C
U1306 SF 5854 W-200 n n n ABS UNI C
U133 SF 4685 W-200 n ABS UNI C
U1331 SF 0650 W-200 n ABS UNI C
U1343 SF 6208 W-200 n n n n ABS UNI C
U1343 SF 6208 W-86 n n n n ABS UNI C
U1349 SF 066D W-200 n ABS UNI C
U1365 DC 659X GLATT n ABS HG P
U1365 SF 836B W-224 n ABS UNI C
U1365 SF 836B W-87 n n n ABS UNI C
U1379 SF 6403 W-200 n n n n ABS UNI C
246
229
244
241
237
243
237
241
242
240
237
242
242
242
242
242
245
244
244
230
244
259
229
244
244
244
244
244
244
244
231
238
241
240
240
230
241
244
242
241
238
238
236
241
241
241
246
231
240
232
240
240
240
240
242
242
242
242
240
236
236
236
236
236
236
242
242
238
241
231
238
244
243
243
243
242
238
244
244
238
230
245
245
244
K –
P
162 163unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Pfleiderer 2013 – 2016
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U141 SF 525E W-200 n n ABS UNI C
U141 DC 686W GLATT n ABS HG P
U1508 SF 966C W-86 n ABS UNI C
U1509 VV SF 26C6 W-200 n ABS UNI C
U1510 VV SF 47B4 W-200 n ABS UNI C
U1559 SF 0707 W-200 n ABS UNI C
U1559 DC 407W GLATT n ABS HG P
U1559 SF 0707 W-86 n n n ABS UNI C
U1574 SF 539B W-200 n n ABS UNI C
U1579 SF 0717 W-200 n ABS UNI C
U1601 SF 612C W-200 n n n ABS UNI C
U1665 SF 540E W-200 n n ABS UNI C
U1667 SF 261D W-200 n n ABS UNI C
U1667 DC 103W GLATT n ABS HG P
U1691 DC 006W GLATT n ABS HG P
U1691 SF 404C W-200 n n ABS UNI C
U1691 SF 404C W-87 n n ABS UNI C
U1715 SF 1283 W-200 n n ABS UNI C
U1717 SF 119A W-200 n ABS UNI C
U1739 SF 680A W-200 n n n ABS UNI C
U1747 SF 017A W-200 n n ABS UNI C
U177 DC 929H GLATT n ABS HG P
U179 DC 557Y GLATT n ABS HG P
U179 SF 207C W-200 n n n ABS UNI C
U182 SF 6082 W-200 n n ABS UNI C
U184 SF 5373 W-200 n n n ABS UNI C
U1856 DC 372X GLATT n ABS HG P
U1876 HG DC 52W7 GLATT n ABS HG P
U1876 VV SF 44B5 W-200 n ABS UNI C
U1877 HG DC 52W6 GLATT n ABS HG P
U1877 VV SF 25C2 W-200 n ABS UNI C
U1878 HG DC 53W0 GLATT n ABS HG P
U1878 VV SF 48B5 W-200 n ABS UNI C
U192 SF 0189 W-200 n ABS UNI C
U194 SF 960E W-200 n n n ABS UNI C
U197 DC 529Y GLATT n ABS HG P
U197 SF 6403 W-200 n n n n ABS UNI C
U1980 SF 897D W-200 n n ABS UNI C
U1983 SF 38B6 W-200 n ABS UNI C
U1987 VV SF 27C9 W-200 n ABS UNI C
U1988 VV SF 25C3 W-200 n ABS UNI C
U1989 VV SF 26C5 W-200 n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U225 SF 5395 W-87 n n ABS UNI C
U225 SF 5395 W-200 n n n n n ABS UNI C
U225 DC 570V GLATT n ABS HG P
U230 SF 5854 GLATT n ABS UNI C
U230 SF 5854 W-87 n n ABS UNI C
U230 DC 325X GLATT n n ABS HG P
U230 SF 5854 W-200 n n n ABS UNI C
U231 SF 1402 W-200 n n n n ABS UNI C
U246 SF 498E W-200 n ABS UNI C
U501 DC 783H GLATT n ABS HG P
U501 SF 43B0 W-200 n ABS UNI C
U506 DC 162J W-200 n n ABS DC E
U506 DC 856H GLATT n ABS HG P
U508 DC 537H GLATT n ABS HG P
U508 DC 952P W-200 n n n n n ABS DC E
U515 DC 40J7 GLATT n ABS HG P
W220 SF 638C W-200 n n ABS UNI C
W300 SF 4693 W-87 n n ABS UNI C
W300 SF 4693 W-101 n n n ABS UNI C
W300 SF 4693 W-200 n n n n ABS UNI C
W300 SF 4693 GLATT n n n n ABS UNI C
W300 SF 4693 W-86 n n n n ABS UNI C
W300 SF 4693 W-88 n n ABS UNI C
W400 SF 960D W-101 n n n ABS UNI C
W410 SF 6346 W-200 n n n n n ABS UNI C
W410 SF 6346 GLATT n n n n n ABS UNI C
W410 SF 6346 W-101 n n n ABS UNI C
W410 SF 6346 W-87 n n n ABS UNI C
W410 SF 6346 W-105 n n n n ABS UNI C
W410 SF 6346 W-102 n n n ABS UNI C
W410 SF 6346 W-224 n n ABS UNI C
243
243
230
243
243
229
243
239
242
231
242
252
231
230
271
229
244
242
242
242
242
242
242
246
244
244
244
244
244
244
244
243
231
246
240
242
238
229
238
243
238
244
243
240
228
228
241
241
239
239
245
236
231
230
240
244
243
229
230
242
230
240
230
242
237
246
230
244
246
241
240
240
240
K –
P
164 165
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Polyrey 2013
Döllken-Kanten passend zu | Döllken Edgebands to match
Polyrey 2013PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
005 SF 0110 W-101 n n ABS UNI C
005 SF 0110 W-102 n ABS UNI C
005 SF 0110 W-86 n ABS UNI C
005 SF 0110 W-200 n n n n n ABS UNI C
005 SF 0110 GLATT n n n ABS UNI C
005 SF 0110 W-105 n n n ABS UNI C
030 SF 6346 W-200 n n n n n ABS UNI C
030 SF 6346 GLATT n n n n n ABS UNI C
030 SF 6346 W-101 n n n ABS UNI C
030 SF 6346 W-87 n n n ABS UNI C
030 SF 6346 W-105 n n n n ABS UNI C
030 SF 6346 W-102 n n n ABS UNI C
030 SF 6346 W-224 n n ABS UNI C
149 SF 0547 W-200 n n n ABS UNI C
156 SF 6108 W-200 n n ABS UNI C
A022 DC 887Y GLATT n ABS DC C
A036 SF 061C W-200 n ABS UNI C
B014 SF 1153 W-200 n ABS UNI C
B015 SF 6346 W-200 n n n n n ABS UNI C
B015 SF 6346 GLATT n n n n n ABS UNI C
B015 SF 6346 W-101 n n n ABS UNI C
B015 SF 6346 W-87 n n n ABS UNI C
B015 SF 6346 W-105 n n n n ABS UNI C
B015 SF 6346 W-102 n n n ABS UNI C
B015 SF 6346 W-224 n n ABS UNI C
B048 SF 864A W-87 n n n ABS UNI C
B068 SF 6444 W-200 n n n ABS UNI C
B068 SF 6444 GLATT n n ABS UNI C
B069 SF 1072 W-200 n n ABS UNI C
B070 DC 263V GLATT n n n ABS HG P
B070 SF 6444 W-200 n n n ABS UNI C
B070 SF 6444 GLATT n n ABS UNI C
B086 SF 5847 W-200 n n n ABS UNI C
B099 DC 242U W-200 n ABS DC E
B101 DC 926H W-200 n ABS DC C
B116 SF 5373 W-200 n n n ABS UNI C
B117 SF 617E W-200 n ABS UNI C
B117 SF 617E W-86 n n ABS UNI C
B117 SF 617E W-79 n n ABS UNI C
C003 DC 8196 W-104 n n ABS DC C
C003 DC 8196 W-88 n ABS DC C
C014 DC 538J GLATT n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
C017 SF 6414 W-200 n n n ABS UNI C
C062 SF 5395 W-87 n n ABS UNI C
C062 SF 5395 W-200 n n n n n ABS UNI C
C128 DC 597H W-111 n n n n ABS DC E
C131 DC 12L0 W-79 n ABS DC E
C131 DC 12L0 W-86 n ABS DC C
C131 DC 12L0 W-86 n ABS DC E
C131 DC 12L0 W-86 n n ABS DC E
C138 DC 363V W-86 n n ABS DC C
C138 DC 363V W-87 n ABS DC C
D021 DC 012J W-200 n ABS DC C
E028 DC 246K W-200 n n ABS DC C
E028 DC 246K W-87 n ABS DC C
F001 SF 454C W-200 n ABS UNI C
F008 SF 666A W-200 n n ABS UNI C
F011 DC 708N W-200 n ABS DC C
F011 DC 708N W-87 n n n n ABS DC C
F053 SF 234A W-200 n ABS UNI C
G003 SF 2109 W-200 n ABS UNI C
G012 SF 6008 W-200 n n ABS UNI C
G024 SF 1086 W-87 n n ABS UNI C
G024 SF 1086 W-200 n n n ABS UNI C
G029 SF 1878 GLATT n n ABS UNI C
G029 SF 1878 W-200 n n n n ABS UNI C
G029 SF 1878 W-101 n n n ABS UNI C
G029 SF 1878 W-87 n n n n ABS UNI C
G029 SF 1878 W-224 n n ABS UNI C
G031 SF 511A W-200 n n ABS UNI C
G075 SF 387A W-200 n n ABS UNI C
G076 SF 089A W-200 n n n ABS UNI C
H027 DC 316N W-200 n ABS DC C
H027 DC 316N W-87 n n ABS DC C
M003 DC 7099 W-200 n n ABS DC E
M007 DC 554K W-200 n ABS DC C
M100 SF 62A1 W-200 n ABS UNI C
N002 SF 281D W-200 n n ABS UNI C
N005 SF 0110 W-101 n n ABS UNI C
N005 SF 0110 W-102 n ABS UNI C
N005 SF 0110 W-86 n ABS UNI C
N005 DC 319V GLATT n n n ABS HG P
N005 SF 0110 W-200 n n n n n ABS UNI C
N005 SF 0110 GLATT n n n ABS UNI C
236
236
236
236
236
236
244
244
244
244
244
244
244
237
244
269
238
239
244
244
244
244
244
244
244
246
245
245
238
229
245
245
243
254
270
243
244
244
244
268
268
261
245
243
243
262
252
252
252
252
257
257
250
254
254
242
245
265
265
240
240
244
239
239
240
240
240
240
240
243
241
238
256
256
265
261
244
240
236
236
236
229
236
236
R –
S
166 167unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Polyrey 2013Rafal-Trombini
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
N005 SF 0110 W-105 n n n ABS UNI C
N010 DC 396N W-86 n ABS DC C
N026 DC 822W W-86 n n n ABS DC C
O030 DC 283X W-87 n ABS DC C
O030 DC 283X GLATT n n n ABS DC C
O078 DC 67N7 W-87 n ABS DC C
O078 DC 67N7 W-86 n n n n ABS DC C
P001 SF 076C W-200 n ABS UNI C
P009 DC 6996 W-200 n ABS DC C
P092 SF 169C W-87 n n ABS UNI C
P092 SF 169C W-200 n n n ABS UNI C
R021 SF 345D W-87 n n n ABS UNI C
R036 SF 541B W-200 n n n n ABS UNI C
T025 DC 19L8 W-224 n n n ABS DC C
Z009 DC 927H W-200 n n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
Rafal -TrombiniPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
110 SF 4693 W-87 n n ABS UNI C
110 SF 4693 W-101 n n n ABS UNI C
110 SF 4693 W-200 n n n n ABS UNI C
110 SF 4693 GLATT n n n n ABS UNI C
110 SF 4693 W-86 n n n n ABS UNI C
110 SF 4693 W-88 n n ABS UNI C
1808 DC 040V W-86 n n ABS DC C
183 SF 6287 W-200 n ABS UNI C
2370 DC 8978 W-88 n ABS DC C
2370 DC 8978 W-87 n ABS DC C
338 SF 836B W-224 n ABS UNI C
338 SF 836B W-87 n n n ABS UNI C
341 SF 0110 W-101 n n ABS UNI C
341 SF 0110 W-102 n ABS UNI C
341 SF 0110 W-86 n ABS UNI C
341 SF 0110 W-200 n n n n n ABS UNI C
341 SF 0110 GLATT n n n ABS UNI C
341 SF 0110 W-105 n n n ABS UNI C
3657 DC 450V W-86 n n ABS DC C
3661 DC 083V P7166 n ABS DC C
3672 DC 8631 W-88 n n n n ABS DC C
3673 DC 728L W-200 n n ABS DC C
4293 DC 580M W-87 n n ABS DC C
4297 DC 440U W-87 n ABS DC C
4428 DC 957N W-200 n ABS DC C
4459 DC 179K W-105 n n n ABS DC C
471 SF 0693 W-200 n n ABS UNI C
478 SF 234A W-200 n ABS UNI C
479 SF 6403 W-200 n n n n ABS UNI C
481 SF 5854 GLATT n ABS UNI C
481 SF 5854 W-87 n n ABS UNI C
481 SF 5854 W-200 n n n ABS UNI C
483 SF 5971 W-200 n n n n ABS UNI C
483 SF 5971 W-224 n n ABS UNI C
484 SF 1402 W-200 n n n n ABS UNI C
4905 DC 7422 GLATT n n n ABS DC C
491 SF 482B P7166 n ABS UNI C
496 SF 4861 W-101 n n n ABS UNI C
496 SF 4861 W-200 n n n ABS UNI C
512 SF 6217 W-200 n ABS UNI C
529 SF 3311 W-200 n n n ABS UNI C
529 SF 3311 W-87 n n n n ABS UNI C
236
258
268
255
255
264
264
238
264
240
240
241
243
253
271
242
242
242
242
242
242
250
244
270
270
245
245
236
236
236
236
236
236
259
251
268
266
261
258
271
253
238
240
244
243
243
243
244
244
239
266
242
242
242
244
241
241
R –
S
168 169unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Rafal-Trombini
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
533 SF 6241 W-101 n n ABS UNI C
533 SF 6241 W-200 n n n ABS UNI C
534 SF 561D W-200 n n n ABS UNI C
536 SF 6170 W-200 n n n n ABS UNI C
546 SF 0595 W-200 n n ABS UNI C
552 SF 5373 W-200 n n n ABS UNI C
556 SF 659B W-87 n ABS UNI C
556 SF 659B W-86 n n n ABS UNI C
558 SF 2319 W-200 n n ABS UNI C
562 SF 6217 W-200 n ABS UNI C
569 SF 0650 W-200 n ABS UNI C
572 SF 1047 W-200 n ABS UNI C
572 SF 1047 W-87 n ABS UNI C
580 SF 680A W-200 n n n ABS UNI C
584 SF 511A W-200 n n ABS UNI C
585 SF 617A W-200 n ABS UNI C
599 SF 753A W-200 n ABS UNI C
6004 DC 861U W-200 n n n ABS DC C
6021 DC 407L W-105 n ABS DC C
6024 DC 064J W-200 n ABS DC C
6034 DC 021K W-88 n n ABS DC C
6036 DC 6996 W-200 n ABS DC C
605 SF 447C W-200 n n ABS UNI C
606 SF 0180 W-200 n ABS UNI C
6140 DC 03J3 W-105 n ABS DC C
6140 DC 03J3 W-87 n n n n ABS DC C
6154 DC 13L8 W-86 n n n ABS DC C
6182 DC 27K7 W-111 n ABS DC E
6188 DC 926J W-200 n ABS DC C
6212 DC 14L3 SL111 n ABS DC E
6212 DC 14L3 W-111 n n n ABS DC E
6215 DC 488Y W-105 n ABS DC C
6215 DC 488Y W-87 n ABS DC C
6227 DC 861U W-200 n n n ABS DC C
6228 DC 958X GLATT n n ABS DC C
6228 DC 958X P7145 n n ABS DC C
6265 DC 538J GLATT n n ABS DC C
6340 DC 15J4 W-111 n n n ABS DC E
6526 DC 103V W-86 n ABS DC C
6526 DC 103V W-88 n n n ABS DC C
6531 DC 708N W-200 n ABS DC C
6531 DC 708N W-87 n n n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
6576 DC 03L0 W-86 n n ABS DC C
6582 DC 727L W-200 n n ABS DC C
6668 DC 904X W-105 n n ABS DC C
6675 DC 857J GLATT n ABS DC C
6729 DC 04L4 W-111 n n n ABS DC E
6745 DC 679K W-200 n ABS DC C
6745 DC 679K P7145 n n ABS DC C
6767 DC 012J W-200 n ABS DC C
6868 DC 099V W-105 n ABS DC C
6868 DC 099V W-86 n n n ABS DC C
6876 DC 6569 W-200 n ABS DC C
244
244
243
244
237
243
245
245
240
244
238
238
238
245
243
244
245
268
258
251
250
264
242
236
250
250
252
255
270
252
252
260
260
268
271
271
261
252
251
251
265
265
250
266
270
268
250
264
264
250
251
251
262
R –
S
170 171unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
RAL
Döllken-Kanten passend zu | Döllken Edgebands to match
RALPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1003 SF 0717 W-200 n ABS UNI C
1013 SF 6214 W-200 n n ABS UNI C
1013 SF 6107 W-200 n ABS UNI C
1015 SF 6414 W-200 n n n ABS UNI C
1017 SF 0188 W-200 n ABS UNI C
1021 SF 178A W-200 n ABS UNI C
1023 SF 0180 W-200 n ABS UNI C
2012 SF 578D W-87 n n n ABS UNI C
3000 SF 5395 W-87 n n ABS UNI C
3000 SF 5395 W-200 n n n n n ABS UNI C
3002 SF 1067 W-200 n n n ABS UNI C
3003 SF 404C W-200 n n ABS UNI C
3003 SF 404C W-87 n n ABS UNI C
3009 SF 1086 W-87 n n ABS UNI C
3009 SF 1086 W-200 n n n ABS UNI C
3011 SF 1086 W-87 n n ABS UNI C
3011 SF 1086 W-200 n n n ABS UNI C
3020 SF 5395 W-87 n n ABS UNI C
3020 SF 5395 W-200 n n n n n ABS UNI C
5002 SF 5847 W-200 n n n ABS UNI C
5003 SF 101A W-200 n n ABS UNI C
5010 SF 0436 W-200 n n ABS UNI C
5010 SF 0193 W-200 n n n ABS UNI C
5011 SF 743B W-87 n n n ABS UNI C
5013 SF 101A W-200 n n ABS UNI C
6005 SF 0597 W-200 n n ABS UNI C
6024 SF 386A W-200 n n ABS UNI C
6029 SF 386A W-200 n n ABS UNI C
6032 SF 386A W-200 n n ABS UNI C
7006 SF 100B W-200 n n ABS UNI C
7016 SF 5992 W-200 n n n n n ABS UNI C
7016 SF 5992 W-224 n n ABS UNI C
7021 SF 5992 W-200 n n n n n ABS UNI C
7021 SF 5992 W-224 n n ABS UNI C
7024 SF 1402 W-200 n n n n ABS UNI C
7035 SF 1878 GLATT n n ABS UNI C
7035 SF 1878 W-200 n n n n ABS UNI C
7035 SF 1878 W-101 n n n ABS UNI C
7035 SF 1878 W-87 n n n n ABS UNI C
7035 SF 1878 W-224 n n ABS UNI C
7037 SF 0179 W-200 n n n ABS UNI C
7037 SF 0179 W-87 n n n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
7039 SF 100B W-200 n n ABS UNI C
7040 SF 2109 W-200 n ABS UNI C
7042 SF 0184 W-200 n ABS UNI C
7044 SF 0549 W-200 n n n n ABS UNI C
7047 SF 1878 GLATT n n ABS UNI C
7047 SF 1878 W-200 n n n n ABS UNI C
7047 SF 3311 W-200 n n n ABS UNI C
7047 SF 1878 W-101 n n n ABS UNI C
7047 SF 1878 W-87 n n n n ABS UNI C
7047 SF 3311 W-87 n n n n ABS UNI C
7047 SF 1878 W-224 n n ABS UNI C
8014 SF 6082 W-200 n n ABS UNI C
8022 SF 0110 W-101 n n ABS UNI C
8022 SF 0110 W-102 n ABS UNI C
8022 SF 0110 W-86 n ABS UNI C
8022 SF 0110 W-200 n n n n n ABS UNI C
8022 SF 0110 GLATT n n n ABS UNI C
8022 SF 0110 W-105 n n n ABS UNI C
8028 SF 6082 W-200 n n ABS UNI C
9001 SF 6403 W-200 n n n n ABS UNI C
9002 SF 2319 W-200 n n ABS UNI C
9002 SF 0805 W-200 n ABS UNI C
9002 SF 6445 W-200 n n ABS UNI C
9003 SF 4693 W-87 n n ABS UNI C
9003 SF 6346 W-200 n n n n n ABS UNI C
9003 SF 6346 GLATT n n n n n ABS UNI C
9003 SF 4693 W-101 n n n ABS UNI C
9003 SF 4693 W-200 n n n n ABS UNI C
9003 SF 4693 GLATT n n n n ABS UNI C
9003 SF 4693 W-86 n n n n ABS UNI C
9003 SF 6346 W-101 n n n ABS UNI C
9003 SF 6346 W-87 n n n ABS UNI C
9003 SF 6346 W-105 n n n n ABS UNI C
9003 SF 4693 W-88 n n ABS UNI C
9003 SF 6346 W-102 n n n ABS UNI C
9003 SF 6346 W-224 n n ABS UNI C
9004 SF 0110 W-101 n n ABS UNI C
9004 SF 0110 W-102 n ABS UNI C
9004 SF 0110 W-86 n ABS UNI C
9004 SF 0110 W-200 n n n n n ABS UNI C
9004 SF 0110 GLATT n n n ABS UNI C
9004 SF 0110 W-105 n n n ABS UNI C
238
244
244
245
236
240
236
243
243
243
238
241
241
239
239
239
239
243
243
243
238
237
237
245
238
237
241
241
241
238
244
244
244
244
239
240
240
240
240
240
236
236
238
240
236
237
240
240
241
240
240
241
240
244
236
236
236
236
236
236
244
244
240
238
245
242
244
244
242
242
242
242
244
244
244
242
244
244
236
236
236
236
236
236
R –
S
172 173unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
RALResopal / Wilsonart
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
9005 SF 0110 W-101 n n ABS UNI C
9005 SF 0110 W-102 n ABS UNI C
9005 SF 0110 W-86 n ABS UNI C
9005 SF 0110 W-200 n n n n n ABS UNI C
9005 SF 0110 GLATT n n n ABS UNI C
9005 SF 0110 W-105 n n n ABS UNI C
9006 DC 435K GLATT n ABS DC E
9006 DC 6835 W-200 n n ABS DC E
9010 SF 6346 W-200 n n n n n ABS UNI C
9010 SF 6346 GLATT n n n n n ABS UNI C
9010 SF 6346 W-101 n n n ABS UNI C
9010 SF 6346 W-87 n n n ABS UNI C
9010 SF 6346 W-105 n n n n ABS UNI C
9010 SF 6346 W-102 n n n ABS UNI C
9010 SF 6346 W-224 n n ABS UNI C
9011 SF 0110 W-101 n n ABS UNI C
9011 SF 0110 W-102 n ABS UNI C
9011 SF 0110 W-86 n ABS UNI C
9011 SF 0110 W-200 n n n n n ABS UNI C
9011 SF 0110 GLATT n n n ABS UNI C
9011 SF 0110 W-105 n n n ABS UNI C
9016 SF 4693 W-87 n n ABS UNI C
9016 SF 4693 W-101 n n n ABS UNI C
9016 SF 4693 W-200 n n n n ABS UNI C
9016 SF 4693 GLATT n n n n ABS UNI C
9016 SF 4693 W-86 n n n n ABS UNI C
9016 SF 4693 W-88 n n ABS UNI C
9017 SF 0110 W-101 n n ABS UNI C
9017 SF 0110 W-102 n ABS UNI C
9017 SF 0110 W-86 n ABS UNI C
9017 SF 0110 W-200 n n n n n ABS UNI C
9017 SF 0110 GLATT n n n ABS UNI C
9017 SF 0110 W-105 n n n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
Resopal / WilsonartPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0112 SF 6287 W-200 n ABS UNI C
0120 SF 157A W-200 n n n ABS UNI C
0135 SF 1083 W-200 n ABS UNI C
0135 SF 1083 W-200 n ABS UNI C
0135 SF 1083 W-200 n ABS UNI C
0135 SF 1083 W-200 n ABS UNI C
0135 SF 1083 W-200 n ABS UNI C
0135 SF 1083 W-200 n ABS UNI C
0150 SF 0222 W-200 n ABS UNI C
0160 SF 6241 W-101 n ABS UNI C
0160 SF 6241 W-200 n ABS UNI C
0160 SF 6241 W-101 n ABS UNI C
0160 SF 6241 W-200 n ABS UNI C
0160 SF 6241 W-101 n ABS UNI C
0160 SF 6241 W-200 n ABS UNI C
0160 SF 6241 W-101 n ABS UNI C
0160 SF 6241 W-200 n ABS UNI C
0160 SF 6241 W-101 n ABS UNI C
0160 SF 6241 W-200 n ABS UNI C
0160 SF 6241 W-101 n ABS UNI C
0160 SF 6241 W-200 n ABS UNI C
0160 SF 6241 W-200 n ABS UNI C
0179 SF 617E W-200 n ABS UNI C
0179 SF 617E W-86 n n ABS UNI C
0179 SF 617E W-79 n n ABS UNI C
0314 SF 979C W-200 n ABS UNI C
0336 SF 04B0 W-87 n n n ABS UNI C
0411 SF 0188 W-200 n ABS UNI C
0424 SF 0188 W-200 n ABS UNI C
0433 SF 0707 W-200 n ABS UNI C
0433 SF 0707 W-86 n ABS UNI C
0433 SF 0707 W-86 n ABS UNI C
0433 SF 0707 W-86 n ABS UNI C
0433 SF 0707 W-86 n ABS UNI C
0433 SF 0707 W-86 n ABS UNI C
0433 SF 0707 W-86 n ABS UNI C
0433 SF 0707 W-86 n ABS UNI C
0439 SF 1167 W-200 n ABS UNI C
0520 SF 6082 W-200 n ABS UNI C
0520 SF 6082 W-200 n ABS UNI C
0600 SF 494A W-200 n ABS UNI C
0617 SF 169C W-87 n n ABS UNI C
236
236
236
236
236
236
258
264
244
244
244
244
244
244
244
236
236
236
236
236
236
242
242
242
242
242
242
236
236
236
236
236
236
244
240
238
238
238
238
238
238
237
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
246
237
236
236
238
238
238
238
238
238
238
238
239
244
244
242
240
R –
S
174 175unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Resopal / Wilsonart
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0617 SF 169C W-200 n n n ABS UNI C
0666 SF 617A W-200 n ABS UNI C
0727 SF 680A W-200 n n n ABS UNI C
0760 SF 0436 W-200 n ABS UNI C
0760 SF 0436 W-200 n ABS UNI C
0760 SF 0436 W-200 n ABS UNI C
0760 SF 0436 W-200 n ABS UNI C
0760 SF 0436 W-200 n ABS UNI C
0760 SF 0436 W-200 n ABS UNI C
0901 SF 0110 W-101 n ABS UNI C
0901 SF 0110 W-105 n ABS UNI C
0901 SF 0110 GLATT n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-102 n ABS UNI C
0901 SF 0110 W-86 n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-101 n ABS UNI C
0901 SF 0110 W-105 n ABS UNI C
0901 SF 0110 GLATT n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-101 n ABS UNI C
0901 SF 0110 W-105 n ABS UNI C
0901 SF 0110 GLATT n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-101 n ABS UNI C
0901 SF 0110 W-105 n ABS UNI C
0901 SF 0110 GLATT n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-101 n ABS UNI C
0901 SF 0110 W-105 n ABS UNI C
0901 SF 0110 GLATT n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-101 n ABS UNI C
0901 SF 0110 W-105 n ABS UNI C
0901 SF 0110 GLATT n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 GLATT n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-105 n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0901 SF 0110 W-200 n ABS UNI C
0901 SF 0110 W-200 n ABS UNI C
100 SF 6346 W-200 n n n n n ABS UNI C
100 SF 6346 GLATT n n n n n ABS UNI C
100 SF 6346 W-101 n n n ABS UNI C
100 SF 6346 W-87 n n n ABS UNI C
100 SF 6346 W-105 n n n n ABS UNI C
100 SF 6346 W-102 n n n ABS UNI C
100 SF 6346 W-224 n n ABS UNI C
101 SF 6214 W-200 n n ABS UNI C
103 SF 6444 W-200 n n n ABS UNI C
103 SF 6444 GLATT n n ABS UNI C
10493 DC 7191 W-88 n ABS DC C
106 SF 6346 W-200 n n n n n ABS UNI C
106 SF 6346 GLATT n n n n n ABS UNI C
106 SF 6346 W-101 n n n ABS UNI C
106 SF 6346 W-87 n n n ABS UNI C
106 SF 6346 W-105 n n n n ABS UNI C
106 SF 6346 W-102 n n n ABS UNI C
106 SF 6346 W-224 n n ABS UNI C
10622 SF 1402 W-200 n n n n ABS UNI C
10623 SF 0650 W-200 n ABS UNI C
10734 DC 679K W-200 n ABS DC C
10734 DC 679K P7145 n n ABS DC C
10745 DC 037J W-88 n ABS DC C
10745 DC 037J GLATT n ABS DC C
10753 DC 6794 W-88 n n ABS DC C
10767 DC 679K W-200 n ABS DC C
10767 DC 679K P7145 n n ABS DC C
10768 DC 6629 W-86 n n n ABS DC C
10768 DC 6629 P7145 n n n ABS DC C
10768 DC 6629 GLATT n n n ABS DC C
10776 DC 216J W-87 n n ABS DC C
10848 SF 6241 W-101 n n ABS UNI C
10848 SF 6241 W-200 n n n ABS UNI C
10869 DC 062J W-105 n ABS DC C
10888 DC 879L W-200 n n ABS DC E
10889 SF 0110 W-101 n n ABS UNI C
10889 SF 0110 W-102 n ABS UNI C
10889 SF 0110 W-86 n ABS UNI C
10889 SF 0110 W-200 n n n n n ABS UNI C
10889 SF 0110 GLATT n n n ABS UNI C
240
244
245
237
237
237
237
237
237
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
244
244
244
244
244
244
244
244
245
245
265
244
244
244
244
244
244
244
239
238
264
264
250
250
264
264
264
263
263
263
254
244
244
251
269
236
236
236
236
236
R –
S
176 177unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Resopal / Wilsonart
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
10889 SF 0110 W-105 n n n ABS UNI C
10901 DC 037J W-88 n ABS DC C
10901 DC 037J GLATT n ABS DC C
111 SF 6214 W-200 n n ABS UNI C
116 SF 6108 W-200 n n ABS UNI C
120 SF 1878 GLATT n n ABS UNI C
120 SF 1878 W-200 n n n n ABS UNI C
120 SF 1878 W-101 n n n ABS UNI C
120 SF 1878 W-87 n n n n ABS UNI C
120 SF 1878 W-224 n n ABS UNI C
122 SF 1085 W-200 n n n ABS UNI C
123 SF 5373 W-200 n n n ABS UNI C
132 DC 8580 GLATT n ABS DC E
132 DC 8580 W-200 n ABS DC E
135 SF 1083 W-200 n ABS UNI C
135 SF 1083 W-200 n ABS UNI C
135 SF 1083 W-200 n ABS UNI C
135 SF 1083 W-200 n ABS UNI C
135 SF 1083 W-200 n ABS UNI C
135 SF 1083 W-200 n ABS UNI C
13560 SF 157A W-200 n n n ABS UNI C
140 SF 6217 W-200 n ABS UNI C
1511 SF 5395 W-87 n n ABS UNI C
1511 SF 5395 W-200 n n n n n ABS UNI C
1595 SF 0110 W-101 n n ABS UNI C
1595 SF 0110 W-102 n ABS UNI C
1595 SF 0110 W-86 n ABS UNI C
1595 SF 0110 W-200 n n n n n ABS UNI C
1595 SF 0110 GLATT n n n ABS UNI C
1595 SF 0110 W-105 n n n ABS UNI C
160 SF 6241 W-101 n ABS UNI C
160 SF 6241 W-200 n ABS UNI C
160 SF 6241 W-101 n ABS UNI C
160 SF 6241 W-200 n ABS UNI C
160 SF 6241 W-101 n ABS UNI C
160 SF 6241 W-200 n ABS UNI C
160 SF 6241 W-101 n ABS UNI C
160 SF 6241 W-200 n ABS UNI C
160 SF 6241 W-101 n ABS UNI C
160 SF 6241 W-200 n ABS UNI C
160 SF 6241 W-101 n ABS UNI C
160 SF 6241 W-200 n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
160 SF 6241 W-200 n ABS UNI C
165 SF 6211 W-200 n n ABS UNI C
165 SF 6211 W-87 n n n ABS UNI C
166 SF 1878 GLATT n n ABS UNI C
166 SF 1878 W-200 n n n n ABS UNI C
166 SF 1878 W-101 n n n ABS UNI C
166 SF 1878 W-87 n n n n ABS UNI C
166 SF 1878 W-224 n n ABS UNI C
1779 SF 0222 W-200 n ABS UNI C
190 SF 0711 W-200 n n n ABS UNI C
194 SF 6444 W-200 n n n ABS UNI C
194 SF 6444 GLATT n n ABS UNI C
2007 SF 0650 W-200 n ABS UNI C
2100 SF 1083 W-200 n n ABS UNI C
2110 SF 6214 W-200 n n ABS UNI C
2112 SF 6444 W-200 n n n ABS UNI C
2112 SF 6444 GLATT n n ABS UNI C
240 SF 5395 W-87 n n ABS UNI C
240 SF 5395 W-200 n n n n n ABS UNI C
2455 SF 0179 W-200 n n n ABS UNI C
2455 SF 0179 W-87 n n n n ABS UNI C
248 SF 1067 W-200 n n n ABS UNI C
300 SF 1067 W-200 n n n ABS UNI C
302 SF 0189 W-200 n ABS UNI C
3140 SF 5026 W-200 n ABS UNI C
315 SF 4861 W-101 n n n ABS UNI C
315 SF 4861 W-200 n n n ABS UNI C
3189 SF 6346 W-200 n n n n n ABS UNI C
3189 SF 6346 GLATT n n n n n ABS UNI C
3189 SF 6346 W-101 n n n ABS UNI C
3189 SF 6346 W-87 n n n ABS UNI C
3189 SF 6346 W-105 n n n n ABS UNI C
3189 SF 6346 W-102 n n n ABS UNI C
3189 SF 6346 W-224 n n ABS UNI C
3207 DC 69P9 W-249 n n ABS DC E
3207 DC 69P9 W-87 n ABS DC E
3237 SF 1081 W-87 n n n n ABS UNI C
3238 SF 5992 W-200 n n n n n ABS UNI C
3238 SF 5992 W-224 n n ABS UNI C
3394 SF 0110 W-101 n n ABS UNI C
3394 SF 0110 W-102 n ABS UNI C
3394 SF 0110 W-86 n ABS UNI C
236
250
250
244
244
240
240
240
240
240
238
243
268
268
238
238
238
238
238
238
240
244
243
243
236
236
236
236
236
236
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
240
240
240
240
240
237
238
245
245
238
238
244
245
245
243
243
236
236
238
238
237
243
242
242
244
244
244
244
244
244
244
265
265
238
244
244
236
236
236
R –
S
178 179unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Resopal / Wilsonart
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
3394 SF 0110 W-200 n n n n n ABS UNI C
3394 SF 0110 GLATT n n n ABS UNI C
3394 SF 0110 W-105 n n n ABS UNI C
346 SF 753A W-200 n ABS UNI C
354 SF 4693 W-87 n n ABS UNI C
354 SF 4693 W-101 n n n ABS UNI C
354 SF 4693 W-200 n n n n ABS UNI C
354 SF 4693 GLATT n n n n ABS UNI C
354 SF 4693 W-86 n n n n ABS UNI C
354 SF 4693 W-88 n n ABS UNI C
35560 SF 0595 W-200 n n ABS UNI C
3900 DC 797K W-200 n n ABS DC E
3900 DC 797K W-86 n ABS DC E
3949 DC 8580 GLATT n ABS DC E
3949 DC 8580 W-200 n ABS DC E
4050 DC 216J W-87 n n ABS DC C
4083 DC 6522 W-104 n ABS DC C
4087 DC 8176 W-88 n ABS DC C
4101 DC 8166 W-200 n n ABS DC C
4106 SF 0222 W-200 n ABS UNI C
4109 DC 6629 W-86 n n n ABS DC C
4109 DC 6629 P7145 n n n ABS DC C
4109 DC 6629 GLATT n n n ABS DC C
4112 DC 7422 GLATT n n n ABS DC C
4116 DC 037J W-88 n ABS DC C
4116 DC 037J GLATT n ABS DC C
4119 DC 7422 GLATT n n n ABS DC C
4120 DC 8647 W-200 n n n n ABS DC C
4120 DC 8647 W-87 n n n ABS DC C
4124 DC 6967 W-200 n ABS DC C
4129 DC 191W W-200 n ABS DC C
4129 DC 191W W-87 n n n n ABS DC C
4175 DC 8150 W-88 n ABS DC C
4192 DC 8978 W-88 n ABS DC C
4192 DC 8978 W-87 n ABS DC C
4193 DC 6762 W-200 n n ABS DC C
4202 DC 8654 W-200 n ABS DC C
4207 DC 6629 W-86 n n n ABS DC C
4207 DC 6629 P7145 n n n ABS DC C
4207 DC 6629 GLATT n n n ABS DC C
4209 DC 6629 W-86 n n n ABS DC C
4209 DC 6629 P7145 n n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
4209 DC 6629 GLATT n n n ABS DC C
4211 DC 8437 W-200 n n n ABS DC C
424 SF 0188 W-200 n ABS UNI C
4249 DC 8978 W-88 n ABS DC C
4249 DC 8978 W-87 n ABS DC C
4286 DC 784J W-104 n ABS DC C
4286 DC 784J W-88 n ABS DC C
4305 DC 7876 W-200 n n ABS DC C
4306 DC 6967 W-200 n ABS DC C
4314 DC 191Q W-200 n ABS DC C
432 SF 4989 W-200 n n n ABS UNI C
432 SF 4989 W-87 n n n ABS UNI C
4326 DC 728L W-200 n n ABS DC C
4327 DC 021K W-88 n n ABS DC C
4328 DC 708N W-200 n ABS DC C
4328 DC 708N W-87 n n n n ABS DC C
433 SF 0707 W-200 n ABS UNI C
433 SF 0707 W-86 n ABS UNI C
433 SF 0707 W-86 n ABS UNI C
433 SF 0707 W-86 n ABS UNI C
433 SF 0707 W-86 n ABS UNI C
433 SF 0707 W-86 n ABS UNI C
433 SF 0707 W-86 n ABS UNI C
433 SF 0707 W-86 n ABS UNI C
435 SF 221A W-200 n ABS UNI C
4353 DC 357Q GLATT n ABS DC C
4359 DC 202X W-102 n n n ABS DC E
4366 DC 8021 W-88 n n n ABS DC C
4366 DC 8021 W-200 n n ABS DC C
4370 DC 185L W-86 n n ABS DC C
4388 DC 36L4 W-87 n n n n ABS DC C
441 SF 756A W-200 n ABS UNI C
4623 DC 7099 W-200 n n ABS DC E
4674 SF 0711 W-200 n n n ABS UNI C
4710 SF 1083 W-200 n n ABS UNI C
4711 SF 0110 W-101 n n ABS UNI C
4711 SF 0110 W-102 n ABS UNI C
4711 SF 0110 W-86 n ABS UNI C
4711 SF 0110 W-200 n n n n n ABS UNI C
4711 SF 0110 GLATT n n n ABS UNI C
4711 SF 0110 W-105 n n n ABS UNI C
4758 SF 0222 W-200 n ABS UNI C
236
236
236
245
242
242
242
242
242
242
237
267
267
268
268
254
262
268
268
237
263
263
263
266
250
250
266
269
269
264
253
253
267
270
270
263
269
263
263
263
263
263
263
268
236
270
270
267
267
267
264
253
242
242
266
250
265
265
238
238
238
238
238
238
238
238
240
257
272
267
267
253
257
245
265
238
238
236
236
236
236
236
236
237
R –
S
180 181unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Resopal / Wilsonart
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
483 SF 178A W-200 n ABS UNI C
520 SF 6082 W-200 n ABS UNI C
520 SF 6082 W-200 n ABS UNI C
528 DC 021K W-88 n n ABS DC C
5943 DC 135M W-200 n n n ABS DC C
5960 DC 6548 W-88 n n n ABS DC C
5972 DC 580M W-87 n n ABS DC C
5975 DC 064J W-200 n ABS DC C
5992 DC 135M W-200 n n n ABS DC C
5993 DC 363V W-86 n n ABS DC C
5993 DC 363V W-87 n ABS DC C
6001 SF 1072 W-200 n n ABS UNI C
6002 SF 0179 W-200 n n n ABS UNI C
6002 SF 0179 W-87 n n n n ABS UNI C
6030 SF 6346 W-200 n n n n n ABS UNI C
6030 SF 6346 GLATT n n n n n ABS UNI C
6030 SF 6346 W-101 n n n ABS UNI C
6030 SF 6346 W-87 n n n ABS UNI C
6030 SF 6346 W-105 n n n n ABS UNI C
6030 SF 6346 W-102 n n n ABS UNI C
6030 SF 6346 W-224 n n ABS UNI C
6073 DC 037J W-88 n ABS DC C
6073 DC 037J GLATT n ABS DC C
6077 DC 6968 W-105 n n ABS DC C
6077 DC 6968 W-87 n ABS DC C
6077 DC 6968 W-86 n n ABS DC C
6200 SF 0110 W-101 n n ABS UNI C
6200 SF 0110 W-102 n ABS UNI C
6200 SF 0110 W-86 n ABS UNI C
6200 SF 0110 W-200 n n n n n ABS UNI C
6200 SF 0110 GLATT n n n ABS UNI C
6200 SF 0110 W-105 n n n ABS UNI C
6538 SF 4678 W-200 n n ABS UNI C
6734 DC 6968 W-105 n n ABS DC C
6734 DC 6968 W-87 n ABS DC C
6734 DC 6968 W-86 n n ABS DC C
730 SF 0497 W-200 n n ABS UNI C
760 SF 0436 W-200 n ABS UNI C
760 SF 0436 W-200 n ABS UNI C
760 SF 0436 W-200 n ABS UNI C
760 SF 0436 W-200 n ABS UNI C
760 SF 0436 W-200 n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
760 SF 0436 W-200 n ABS UNI C
7861 SF 0110 W-101 n n ABS UNI C
7861 SF 0110 W-102 n ABS UNI C
7861 SF 0110 W-86 n ABS UNI C
7861 SF 0110 W-200 n n n n n ABS UNI C
7861 SF 0110 GLATT n n n ABS UNI C
7861 SF 0110 W-105 n n n ABS UNI C
901 SF 0110 W-101 n ABS UNI C
901 SF 0110 W-105 n ABS UNI C
901 SF 0110 GLATT n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-102 n ABS UNI C
901 SF 0110 W-86 n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-101 n ABS UNI C
901 SF 0110 W-105 n ABS UNI C
901 SF 0110 GLATT n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-101 n ABS UNI C
901 SF 0110 W-105 n ABS UNI C
901 SF 0110 GLATT n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-101 n ABS UNI C
901 SF 0110 W-105 n ABS UNI C
901 SF 0110 GLATT n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-101 n ABS UNI C
901 SF 0110 W-105 n ABS UNI C
901 SF 0110 GLATT n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-101 n ABS UNI C
901 SF 0110 W-105 n ABS UNI C
901 SF 0110 GLATT n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 GLATT n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-105 n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
901 SF 0110 W-200 n ABS UNI C
240
244
244
250
252
262
261
251
252
257
257
238
236
236
244
244
244
244
244
244
244
250
250
264
264
264
236
236
236
236
236
236
242
264
264
264
237
237
237
237
237
237
237
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
R –
S
182 183unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Resopal / WilsonartSacic-Saviola
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
91060 SF 4861 W-101 n n n ABS UNI C
91060 SF 4861 W-200 n n n ABS UNI C
9403 SF 6267 W-200 n ABS UNI C
9403 SF 6267 W-86 n n n ABS UNI C
9417 SF 4693 W-87 n n ABS UNI C
9417 SF 4693 W-101 n n n ABS UNI C
9417 SF 4693 W-200 n n n n ABS UNI C
9417 SF 4693 GLATT n n n n ABS UNI C
9417 SF 4693 W-86 n n n n ABS UNI C
9417 SF 4693 W-88 n n ABS UNI C
9450 SF 750A W-87 n n ABS UNI C
9454 SF 0189 W-200 n ABS UNI C
946 SF 0184 W-200 n ABS UNI C
9488 SF 0547 W-200 n n n ABS UNI C
9497 SF 0436 W-200 n n ABS UNI C
9512 SF 6287 W-200 n ABS UNI C
D14 SF 1086 W-87 n n ABS UNI C
D14 SF 1086 W-200 n n n ABS UNI C
D301 SF 1167 W-200 n ABS UNI C
D354 SF 4693 W-87 n n ABS UNI C
D354 SF 4693 W-101 n n n ABS UNI C
D354 SF 4693 W-200 n n n n ABS UNI C
D354 SF 4693 GLATT n n n n ABS UNI C
D354 SF 4693 W-86 n n n n ABS UNI C
D354 SF 4693 W-88 n n ABS UNI C
D365 SF 386A W-200 n n ABS UNI C
D381 SF 4861 W-101 n n n ABS UNI C
D381 SF 4861 W-200 n n n ABS UNI C
D403 SF 6107 W-200 n ABS UNI C
D414 SF 119A W-200 n ABS UNI C
D416 SF 0197 W-200 n ABS UNI C
D417 SF 5847 W-200 n n n ABS UNI C
D431 SF 6403 W-200 n n n n ABS UNI C
D435 SF 1047 W-200 n ABS UNI C
D435 SF 1047 W-87 n ABS UNI C
D456 SF 6414 W-200 n n n ABS UNI C
D473 SF 482B P7166 n ABS UNI C
D483 SF 178A W-200 n ABS UNI C
D92 SF 6211 W-200 n n ABS UNI C
D92 SF 6211 W-87 n n n ABS UNI C
U090 SF 1082 W-200 n n ABS UNI C
X0042 SF 017A W-200 n n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
Sacic - SaviolaPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
106 DC 8021 W-88 n n n ABS DC C
106 DC 8021 W-200 n n ABS DC C
112 SF 1878 GLATT n n ABS UNI C
112 SF 1878 W-200 n n n n ABS UNI C
112 SF 1878 W-101 n n n ABS UNI C
112 SF 1878 W-87 n n n n ABS UNI C
112 SF 1878 W-224 n n ABS UNI C
146 DC 6629 W-86 n n n ABS DC C
146 DC 6629 P7145 n n n ABS DC C
146 DC 6629 GLATT n n n ABS DC C
152 DC 316N W-200 n ABS DC C
152 DC 316N W-87 n n ABS DC C
165 DC 959N W-87 n ABS DC C
198 SF 0110 W-101 n n ABS UNI C
198 SF 0110 W-102 n ABS UNI C
198 SF 0110 W-86 n ABS UNI C
198 SF 0110 W-200 n n n n n ABS UNI C
198 SF 0110 GLATT n n n ABS UNI C
198 SF 0110 W-105 n n n ABS UNI C
263 SF 3311 W-200 n n n ABS UNI C
263 SF 3311 W-87 n n n n ABS UNI C
276 DC 7422 GLATT n n n ABS DC C
31 DC 957N W-200 n ABS DC C
329 SF 6108 W-200 n n ABS UNI C
351 DC 138V W-200 n n n ABS DC C
351 DC 138V P7145 n n n ABS DC C
3G3 DC 276W W-200 n n ABS DC C
419 SF 1330 W-200 n n n ABS UNI C
42 DC 596J W-200 n n ABS DC C
421 SF 6346 W-200 n n n n n ABS UNI C
421 SF 6346 GLATT n n n n n ABS UNI C
421 SF 6346 W-101 n n n ABS UNI C
421 SF 6346 W-87 n n n ABS UNI C
421 SF 6346 W-105 n n n n ABS UNI C
421 SF 6346 W-102 n n n ABS UNI C
421 SF 6346 W-224 n n ABS UNI C
450 SF 6444 W-200 n n n ABS UNI C
450 SF 6444 GLATT n n ABS UNI C
47 DC 062J W-105 n ABS DC C
508 SF 1083 W-200 n n ABS UNI C
565 SF 862C W-200 n n n n n ABS UNI C
565 SF 862C W-87 n n n ABS UNI C
242
242
244
244
242
242
242
242
242
242
245
237
236
237
237
244
239
239
239
242
242
242
242
242
242
241
242
242
244
239
237
243
244
238
238
245
242
240
244
244
238
236
267
267
240
240
240
240
240
263
263
263
256
256
271
236
236
236
236
236
236
241
241
266
271
244
252
252
255
239
262
244
244
244
244
244
244
244
245
245
251
238
246
246
R –
S
184 185unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Sacic-Saviola
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
565 SF 862C W-224 n n ABS UNI C
578 DC 021K W-88 n n ABS DC C
643 SF 6287 W-200 n ABS UNI C
645 SF 1047 W-200 n ABS UNI C
645 SF 1047 W-87 n ABS UNI C
68 SF 0711 W-200 n n n ABS UNI C
6F4 SF 6214 W-200 n n ABS UNI C
6L6 DC 800Q W-105 n ABS DC C
6L6 DC 800Q W-200 n n n ABS DC C
786 DC 149J W-200 n ABS DC C
805 DC 148J W-105 n n n n ABS DC C
815 DC 064J W-200 n ABS DC C
840 DC 388U W-200 n ABS DC C
840 DC 388U W-87 n n n n ABS DC C
869 DC 580M W-87 n n ABS DC C
881 SF 5971 W-200 n n n n ABS UNI C
881 SF 5971 W-224 n n ABS UNI C
930 SF 4693 W-87 n n ABS UNI C
930 SF 4693 W-101 n n n ABS UNI C
930 SF 4693 W-200 n n n n ABS UNI C
930 SF 4693 GLATT n n n n ABS UNI C
930 SF 4693 W-86 n n n n ABS UNI C
930 SF 4693 W-88 n n ABS UNI C
A20 DC 7871 W-200 n ABS DC C
A22 DC 694L W-200 n ABS DC C
A24 DC 535N W-200 n n ABS DC C
B15 DC 396N W-86 n ABS DC C
C75 DC 6835 W-200 n n ABS DC E
E01 DC 356Q GLATT n ABS DC C
E32 DC 6708 W-105 n n ABS DC C
H11 SF 6403 W-200 n n n n ABS UNI C
N13 SF 540E W-200 n n ABS UNI C
N14 SF 578D W-87 n n n ABS UNI C
N15 SF 511A W-200 n n ABS UNI C
N62 SF 261D W-200 n n ABS UNI C
T21 DC 578Q W-105 n ABS DC C
U51 DC 502L GLATT n n n ABS DC E
X 47 DC 099V W-105 n ABS DC C
X 47 DC 099V W-86 n n n ABS DC C
X13 DC 727L W-200 n n ABS DC C
X33 DC 535N W-200 n n ABS DC C
X41 DC 083V P7166 n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
X66 DC 8166 W-200 n n ABS DC C
X70 DC 656W W-86 n n n n ABS DC C
246
250
244
238
238
238
244
267
267
252
252
251
257
257
261
244
244
242
242
242
242
242
242
267
264
261
258
264
257
263
244
243
243
243
240
261
260
251
251
266
261
251
268
262
R –
S
187
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation186 unverbindliche Empfehlung | non-binding recommendation
SaibSareco Duhospan
Döllken-Kanten passend zu | Döllken Edgebands to match
SaibPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
CH-1011 DC 535N W-200 n n ABS DC C
CH-1085 DC 316N W-200 n ABS DC C
CH-1085 DC 316N W-87 n n ABS DC C
CH-1152 DC 708N W-200 n ABS DC C
CH-1152 DC 708N W-87 n n n n ABS DC C
CH-201 SF 5971 W-200 n n n n ABS UNI C
CH-201 SF 5971 W-224 n n ABS UNI C
CH-281 SF 0547 W-200 n n n ABS UNI C
CH-372 SF 3311 W-200 n n n ABS UNI C
CH-372 SF 3311 W-87 n n n n ABS UNI C
CH-426 SF 862C W-200 n n n n n ABS UNI C
CH-426 SF 862C W-87 n n n ABS UNI C
CH-426 SF 862C W-224 n n ABS UNI C
CH-459 DC 283P GLATT n n ABS DC C
CH-503 DC 440U W-87 n ABS DC C
CH-557 DC 6996 W-200 n ABS DC C
CH-585 DC 703Q W-86 n ABS DC C
CH-585 DC 703Q W-200 n ABS DC C
CH-585 DC 703Q W-87 n n n ABS DC C
CH-585 DC 703Q W-88 n n n ABS DC C
CH-639 DC 959N W-87 n ABS DC C
CH-652 DC 560J W-105 n n ABS DC C
CH-774 DC 8166 W-200 n n ABS DC C
CH-838 DC 6835 W-200 n n ABS DC E
Döllken-Kanten passend zu | Döllken Edgebands to match
Sareco DuhospanPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1313 SF 6346 W-200 n n n n n ABS UNI C
1313 SF 6346 GLATT n n n n n ABS UNI C
1313 SF 6346 W-101 n n n ABS UNI C
1313 SF 6346 W-87 n n n ABS UNI C
1313 SF 6346 W-105 n n n n ABS UNI C
1313 SF 6346 W-102 n n n ABS UNI C
1313 SF 6346 W-224 n n ABS UNI C
1315 SF 6346 W-200 n n n n n ABS UNI C
1315 SF 6346 GLATT n n n n n ABS UNI C
1315 SF 6346 W-101 n n n ABS UNI C
1315 SF 6346 W-87 n n n ABS UNI C
1315 SF 6346 W-105 n n n n ABS UNI C
1315 SF 6346 W-102 n n n ABS UNI C
1315 SF 6346 W-224 n n ABS UNI C
1316 SF 6346 W-200 n n n n n ABS UNI C
1316 SF 6346 GLATT n n n n n ABS UNI C
1316 SF 6346 W-101 n n n ABS UNI C
1316 SF 6346 W-87 n n n ABS UNI C
1316 SF 6346 W-105 n n n n ABS UNI C
1316 SF 6346 W-102 n n n ABS UNI C
1316 SF 6346 W-224 n n ABS UNI C
A241 DC 502L GLATT n n n ABS DC E
A350 DC 700R GLATT n n n 3D 3D P
F115 DC 7099 W-200 n n ABS DC E
F140 DC 952P W-200 n n n n n ABS DC E
FN50 DC 797K W-200 n n ABS DC E
FN50 DC 797K W-86 n ABS DC E
H1000 DC 7977 W-105 n n n ABS DC C
H291043 DC 535N W-200 n n ABS DC C
H325639 DC 064J W-200 n ABS DC C
H325640 DC 708N W-200 n ABS DC C
H325640 DC 708N W-87 n n n n ABS DC C
H39318 DC 316N W-200 n ABS DC C
H39318 DC 316N W-87 n n ABS DC C
H4092 DC 517J W-87 n n ABS DC C
H4092 DC 517J W-200 n ABS DC C
H47 DC 7008 W-88 n n n ABS DC C
H47 DC 7008 W-87 n n ABS DC C
H874 DC 6548 W-88 n n n ABS DC C
HG54 DC 216J W-87 n n ABS DC C
HL18 DC 8437 W-200 n n n ABS DC C
HL413 DC 8176 W-88 n ABS DC C
261
256
256
265
265
244
244
237
241
241
246
246
246
255
258
264
265
265
265
265
271
261
268
264
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
244
260
223
265
271
267
267
267
261
251
265
265
256
256
260
260
265
265
262
254
268
268
R –
S
188 189unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Sareco Duhospan
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
HL664 DC 6522 W-104 n ABS DC C
HL721 DC 6522 W-104 n ABS DC C
HL747 DC 364P W-86 n n ABS DC C
HN312 DC 108J W-200 n n ABS DC C
HN334 DC 913P GLATT n ABS DC C
HN334 DC 913P W-86 n n n n ABS DC C
HN531 DC 517J W-87 n n ABS DC C
HN531 DC 517J W-200 n ABS DC C
HN555 DC 185J W-87 n n ABS DC C
HN555 DC 185J W-88 n n n ABS DC C
HN582 DC 954M W-105 n n ABS DC C
HN582 DC 954M W-200 n ABS DC C
HN582 DC 954M W-87 n n n n ABS DC C
HWC1 DC 679K W-200 n ABS DC C
HWC1 DC 679K P7145 n n ABS DC C
U16DIT SF 6346 W-200 n n n n n ABS UNI C
U16DIT SF 6346 GLATT n n n n n ABS UNI C
U16DIT SF 6346 W-101 n n n ABS UNI C
U16DIT SF 6346 W-87 n n n ABS UNI C
U16DIT SF 6346 W-105 n n n n ABS UNI C
U16DIT SF 6346 W-102 n n n ABS UNI C
U16DIT SF 6346 W-224 n n ABS UNI C
U2015 SF 2319 W-200 n n ABS UNI C
U212 SF 6208 W-200 n n n n ABS UNI C
U212 SF 6208 W-86 n n n n ABS UNI C
U236 SF 2319 W-200 n n ABS UNI C
U255 SF 0711 W-200 n n n ABS UNI C
U266 SF 3311 W-200 n n n ABS UNI C
U266 SF 3311 W-87 n n n n ABS UNI C
U384 SF 288B W-200 n n ABS UNI C
U416 SF 0110 W-101 n n ABS UNI C
U416 SF 0110 W-102 n ABS UNI C
U416 SF 0110 W-86 n ABS UNI C
U416 SF 0110 W-200 n n n n n ABS UNI C
U416 SF 0110 GLATT n n n ABS UNI C
U416 SF 0110 W-105 n n n ABS UNI C
U426 SF 2319 W-200 n n ABS UNI C
U614 SF 6082 W-200 n n ABS UNI C
U796 SF 1138 W-200 n n n ABS UNI C
UL105 SF 1086 W-87 n n ABS UNI C
UL105 SF 1086 W-200 n n n ABS UNI C
UL110 SF 5847 W-200 n n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
UL180 SF 5854 GLATT n ABS UNI C
UL180 SF 5854 W-87 n n ABS UNI C
UL180 SF 5854 W-200 n n n ABS UNI C
UL786 SF 157A W-200 n n n ABS UNI C
UL921 SF 6107 W-200 n ABS UNI C
UN17 SF 0707 W-200 n ABS UNI C
UN17 SF 0707 W-86 n n n ABS UNI C
UN77 SF 157A W-200 n n n ABS UNI C
UN91 SF 1402 W-200 n n n n ABS UNI C
262
262
257
251
270
270
260
260
253
253
271
271
271
264
264
244
244
244
244
244
244
244
240
244
244
240
238
241
241
241
236
236
236
236
236
236
240
244
239
239
239
243
243
243
243
240
244
238
238
240
239
R –
S
191unverbindliche Empfehlung | non-binding recommendation190
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Senosan/SenoplastSit-Saviola
Döllken-Kanten passend zu | Döllken Edgebands to match
Senosan / SenoplastPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
1298 DC 78R4 GLATT n 3D DuoGloss P
1298 DC 19R8 GLATT n 3D 3D 2in1 P
1298 DC 18J4 GLATT n ABS HG P
1298 DC 154W GLATT n ABS HG P
1374 DC 19R8 GLATT n 3D 3D 2in1 P
1374 DC 263V GLATT n n n ABS HG P
3120 DC 71R2 GLATT n 3D 3D 2in1 P
3216 DC 274V GLATT n ABS HG P
3216 DC 78R5 GLATT n 3D DuoGloss P
3216 DC 25R1 GLATT n 3D 3D 2in1 P
4127 DC 61R7 GLATT n 3D 3D 2in1 P
4418 DC 71R1 GLATT n 3D 3D 2in1 P
4472 DC 18R5 GLATT n 3D 3D 2in1 P
4472 DC 962Y GLATT n ABS HG P
4473 DC 18R5 GLATT n 3D 3D 2in1 P
5256 DC 48R6 GLATT n 3D 3D 2in1 P
6270 DC 25R2 GLATT n 3D 3D 2in1 P
7315 DC 24R7 GLATT n 3D 3D 2in1 P
7315 DC 325X GLATT n n ABS HG P
7349 DC 24R9 GLATT n 3D 3D 2in1 P
7349 DC 552Y GLATT n ABS HG P
7368 DC 42R6 GLATT n 3D 3D 2in1 P
7368 DC 557Y GLATT n ABS HG P
7408/7407 DC 59R5 GLATT n 3D 3D 2in1 P
8102 DC 78R6 GLATT n 3D DuoGloss P
8102 DC 19R6 GLATT n 3D 3D 2in1 P
8102 DC 319V GLATT n n n ABS HG P
8102 DC 155W GLATT n ABS HG P
8378/8377 DC 155W GLATT n ABS HG P
85223 DC 54R6 GLATT n 3D 3D 2in1 P
85335 DC 94R7 GLATT n 3D 3D 2in1 P
85335 DC 27N3 GLATT n ABS HG P
85336 DC 32R0 GLATT n 3D 3D 2in1 P
85336 DC 24Q7 GLATT n ABS HG P
8576 DC 25R0 GLATT n 3D 3D 2in1 P
8576 DC 31L2 GLATT n ABS HG P
8636 DC 537H GLATT n ABS HG P
8636/8663 DC 48R4 GLATT n 3D 3D 2in1 P
8663 DC 537H GLATT n ABS HG P
8855/8854 DC 71R0 GLATT n 3D 3D 2in1 P
9091 DC 24R0 GLATT n 3D 3D 2in1 P
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
123 SF 0650 W-200 n ABS UNI C
184 SF 0805 W-200 n ABS UNI C
309 SF 897D W-200 n n ABS UNI C
348 SF 0110 W-101 n n ABS UNI C
348 SF 0110 W-102 n ABS UNI C
348 SF 0110 W-86 n ABS UNI C
348 SF 0110 W-200 n n n n n ABS UNI C
348 SF 0110 GLATT n n n ABS UNI C
348 SF 0110 W-105 n n n ABS UNI C
3M9 SF 5992 W-200 n n n n n ABS UNI C
3M9 SF 5992 W-224 n n ABS UNI C
445 SF 6414 W-200 n n n ABS UNI C
499 SF 1047 W-200 n ABS UNI C
499 SF 1047 W-87 n ABS UNI C
565 SF 862C W-200 n n n n n ABS UNI C
565 SF 862C W-87 n n n ABS UNI C
565 SF 862C W-224 n n ABS UNI C
645 SF 388E W-200 n n n ABS UNI C
6F4 SF 4989 W-200 n n n ABS UNI C
6F4 SF 4989 W-87 n n n ABS UNI C
6P7 SF 1086 W-87 n n ABS UNI C
6P7 SF 1086 W-200 n n n ABS UNI C
765 SF 4861 W-101 n n n ABS UNI C
765 SF 4861 W-200 n n n ABS UNI C
7G9 SF 936D W-200 n ABS UNI C
904 SF 1067 W-200 n n n ABS UNI C
9V0 SF 0595 W-200 n n ABS UNI C
A10 SF 6214 W-200 n n ABS UNI C
A21 SF 6287 W-200 n ABS UNI C
AA9 SF 2319 W-200 n n ABS UNI C
DE5 SF 5151 W-200 n n ABS UNI C
DE5 SF 5151 GLATT n n n ABS UNI C
DE5 SF 5151 W-87 n n n ABS UNI C
DL2 SF 6241 W-101 n n ABS UNI C
DL2 SF 6241 W-200 n n n ABS UNI C
DM7 SF 221A W-200 n ABS UNI C
DQ7 SF 617E W-200 n ABS UNI C
DQ7 SF 617E W-86 n n ABS UNI C
DQ7 SF 617E W-79 n n ABS UNI C
N13 SF 540E W-200 n n ABS UNI C
N15 SF 511A W-200 n n ABS UNI C
X1B SF 0189 W-200 n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
Sit - Saviola
224
222
228
228
222
229
223
229
224
222
223
223
222
232
222
223
222
222
229
222
230
223
230
223
224
222
229
228
228
223
224
229
223
229
222
229
230
223
230
223
222
238
238
246
236
236
236
236
236
236
244
244
245
238
238
246
246
246
241
242
242
239
239
242
242
246
238
237
244
244
240
243
243
243
244
244
240
244
244
244
243
243
237
R –
S
193
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation192 unverbindliche Empfehlung | non-binding recommendation
Sit-SaviolaSonae / Tafibra
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
X1C SF 680A W-200 n n n ABS UNI C
X97 SF 617A W-200 n ABS UNI C
XK1 SF 169C W-87 n n ABS UNI C
XK1 SF 169C W-200 n n n ABS UNI C
XR1 SF 234A W-200 n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
B020 SF 6346 W-200 n n n n n ABS UNI C
B020 SF 6346 GLATT n n n n n ABS UNI C
B020 SF 6346 W-101 n n n ABS UNI C
B020 SF 6346 W-87 n n n ABS UNI C
B020 SF 6346 W-105 n n n n ABS UNI C
B020 SF 6346 W-102 n n n ABS UNI C
B020 SF 6346 W-224 n n ABS UNI C
B091 SF 4693 W-87 n n ABS UNI C
B091 SF 4693 W-101 n n n ABS UNI C
B091 SF 4693 W-200 n n n n ABS UNI C
B091 SF 4693 GLATT n n n n ABS UNI C
B091 SF 4693 W-86 n n n n ABS UNI C
B091 SF 4693 W-88 n n ABS UNI C
B093 SF 6346 W-200 n n n n n ABS UNI C
B093 SF 6346 GLATT n n n n n ABS UNI C
B093 SF 6346 W-101 n n n ABS UNI C
B093 SF 6346 W-87 n n n ABS UNI C
B093 SF 6346 W-105 n n n n ABS UNI C
B093 SF 6346 W-102 n n n ABS UNI C
B093 SF 6346 W-224 n n ABS UNI C
B094 SF 4693 W-87 n n ABS UNI C
B094 SF 4693 W-101 n n n ABS UNI C
B094 SF 4693 W-200 n n n n ABS UNI C
B094 SF 4693 GLATT n n n n ABS UNI C
B094 SF 4693 W-86 n n n n ABS UNI C
B094 SF 4693 W-88 n n ABS UNI C
B101 SF 4693 W-87 n n ABS UNI C
B101 SF 4693 W-101 n n n ABS UNI C
B101 SF 4693 W-200 n n n n ABS UNI C
B101 SF 4693 GLATT n n n n ABS UNI C
B101 SF 4693 W-86 n n n n ABS UNI C
B101 SF 4693 W-88 n n ABS UNI C
B110 SF 091E W-86 n n n ABS UNI C
B110 DC 858Y GLATT n n n ABS HG P
B111 SF 4693 W-87 n n ABS UNI C
B111 SF 4693 W-101 n n n ABS UNI C
B111 SF 4693 W-200 n n n n ABS UNI C
B111 SF 4693 GLATT n n n n ABS UNI C
B111 SF 4693 W-86 n n n n ABS UNI C
B111 SF 4693 W-88 n n ABS UNI C
B153 SF 1083 W-200 n n ABS UNI C
B3002 SF 4693 W-87 n n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
Sonae / Tafibra
245
244
240
240
240
244
244
244
244
244
244
244
242
242
242
242
242
242
244
244
244
244
244
244
244
242
242
242
242
242
242
242
242
242
242
242
242
238
231
242
242
242
242
242
242
238
242
R –
S
195unverbindliche Empfehlung | non-binding recommendation194
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Sonae / Tafibra
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
B3002 SF 4693 W-101 n n n ABS UNI C
B3002 SF 4693 W-200 n n n n ABS UNI C
B3002 SF 4693 GLATT n n n n ABS UNI C
B3002 SF 4693 W-86 n n n n ABS UNI C
B3002 SF 4693 W-88 n n ABS UNI C
B3002 DC 498V GLATT n n n ABS HG P
B3768 SF 6346 W-200 n n n n n ABS UNI C
B3768 SF 6346 GLATT n n n n n ABS UNI C
B3768 SF 6346 W-101 n n n ABS UNI C
B3768 SF 6346 W-87 n n n ABS UNI C
B3768 SF 6346 W-105 n n n n ABS UNI C
B3768 SF 6346 W-102 n n n ABS UNI C
B3768 SF 6346 W-224 n n ABS UNI C
B3822 SF 4693 W-87 n n ABS UNI C
B3822 SF 4693 W-101 n n n ABS UNI C
B3822 SF 4693 W-200 n n n n ABS UNI C
B3822 SF 4693 GLATT n n n n ABS UNI C
B3822 SF 4693 W-86 n n n n ABS UNI C
B3822 SF 4693 W-88 n n ABS UNI C
B4062 SF 4693 W-87 n n ABS UNI C
B4062 SF 4693 W-101 n n n ABS UNI C
B4062 SF 4693 W-200 n n n n ABS UNI C
B4062 SF 4693 GLATT n n n n ABS UNI C
B4062 SF 4693 W-86 n n n n ABS UNI C
B4062 SF 4693 W-88 n n ABS UNI C
F033 DC 7099 W-200 n n ABS DC E
F2039 DC 797K W-200 n n ABS DC E
F2039 DC 797K W-86 n ABS DC E
F2195 DC 32L2 W-86 n n n n ABS DC E
F2204 DC 60N4 GLATT n ABS DC C
F3009 DC 952P W-200 n n n n n ABS DC E
F3010 DC 396H W-200 n ABS DC E
F3010 DC 40J7 GLATT n ABS HG P
F3020 DC 8580 GLATT n ABS DC E
F3020 DC 8580 W-200 n ABS DC E
F3818 DC 09J7 W-86 n ABS DC E
F6012 DC 70M0 W-87 n ABS DC C
F6013 DC 69M9 W-87 n ABS DC C
F6051 DC 65M2 W-200 n n ABS DC E
F6051 DC 65M2 W-101 n ABS DC E
F6056 DC 72M4 W-200 n ABS DC C
F6057 SF 437E W-200 n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
F6057 SF 437E W-86 n n n ABS UNI C
F6058 DC 899V GLATT n ABS HG P
F6058 SF 922B W-200 n n ABS UNI C
F6059 SF 41A1 W-86 n ABS UNI C
F6064 DC 94L3 W-87 n n n ABS DC C
F750 DC 72M7 W-86 n ABS DC C
F755 DC 76M0 W-86 n ABS DC C
F934 DC 735V W-200 n ABS DC E
F934 DC 735V W-200 n ABS DC C
F939 DC 382L W-200 n ABS DC C
L00111 SF 862C W-200 n n n n n ABS UNI C
L00111 SF 862C W-87 n n n ABS UNI C
L00111 SF 862C W-224 n n ABS UNI C
L00115 SF 221A W-200 n ABS UNI C
L002 SF 1878 GLATT n n ABS UNI C
L002 SF 1878 W-200 n n n n ABS UNI C
L002 SF 1878 W-101 n n n ABS UNI C
L002 SF 1878 W-87 n n n n ABS UNI C
L002 SF 1878 W-224 n n ABS UNI C
L024 SF 206E W-87 n ABS UNI C
L0600 DC 51K1 GLATT n ABS HG P
L06001 SF 1072 W-200 n n ABS UNI C
L06003 SF 1402 W-200 n n n n ABS UNI C
L10051 SF 864A W-87 n n n ABS UNI C
L10052 SF 086A W-200 n ABS UNI C
L1057 SF 836B W-224 n ABS UNI C
L1057 SF 836B W-87 n n n ABS UNI C
L113 SF 4678 W-200 n n ABS UNI C
L114 SF 482B P7166 n ABS UNI C
L12081 SF 178A W-200 n ABS UNI C
L12097 SF 5908 W-200 n n n ABS UNI C
L122 SF 0187 W-200 n ABS UNI C
L1237 SF 386A W-200 n n ABS UNI C
L124 SF 0110 W-101 n n ABS UNI C
L124 SF 0110 W-102 n ABS UNI C
L124 SF 0110 W-86 n ABS UNI C
L124 SF 0110 W-200 n n n n n ABS UNI C
L124 SF 0110 GLATT n n n ABS UNI C
L124 SF 0110 W-105 n n n ABS UNI C
L1304 SF 5847 W-200 n n n ABS UNI C
L1305 SF 6211 W-200 n n ABS UNI C
L1305 SF 6211 W-87 n n n ABS UNI C
242
242
242
242
242
230
244
244
244
244
244
244
244
242
242
242
242
242
242
242
242
242
242
242
242
265
267
267
256
262
271
257
229
268
268
251
265
264
263
263
266
242
242
231
246
241
271
266
267
266
266
257
246
246
246
240
240
240
240
240
240
240
230
238
239
246
238
245
245
242
242
240
243
236
241
236
236
236
236
236
236
243
244
244
R –
S
197unverbindliche Empfehlung | non-binding recommendation196
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Sonae / Tafibra
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L149 SF 6208 W-200 n n n n ABS UNI C
L149 SF 6208 W-86 n n n n ABS UNI C
L157 SF 6211 W-200 n n ABS UNI C
L157 SF 6211 W-87 n n n ABS UNI C
L161 SF 556B W-87 n n n ABS UNI C
L164 SF 6414 W-200 n n n ABS UNI C
L167 SF 089A W-200 n n n ABS UNI C
L169 SF 6241 W-101 n n ABS UNI C
L169 SF 6241 W-200 n n n ABS UNI C
L174 SF 5854 GLATT n ABS UNI C
L174 SF 5854 W-87 n n ABS UNI C
L174 SF 5854 W-200 n n n ABS UNI C
L176 SF 1878 GLATT n n ABS UNI C
L176 SF 1878 W-200 n n n n ABS UNI C
L176 SF 1878 W-101 n n n ABS UNI C
L176 SF 1878 W-87 n n n n ABS UNI C
L176 SF 1878 W-224 n n ABS UNI C
L180 SF 735A W-200 n n n ABS UNI C
L180 SF 735A W-87 n n n ABS UNI C
L1828 SF 130D W-87 n n n ABS UNI C
L1866 SF 979C W-200 n ABS UNI C
L2199 SF 203E W-87 n ABS UNI C
L2199 SF 203E W-200 n ABS UNI C
L2200 SF 202E W-87 n ABS UNI C
L2201 SF 201E W-87 n n n ABS UNI C
L2202 SF 281D W-200 n n ABS UNI C
L2444 SF 011E W-87 n ABS UNI C
L2446 SF 169C W-87 n n ABS UNI C
L2446 SF 169C W-200 n n n ABS UNI C
L2446 DC 72N1 GLATT n ABS HG P
L301 SF 1138 W-200 n n n ABS UNI C
L3031 DC 319V GLATT n n n ABS HG P
L3031 SF 0110 W-101 n n ABS UNI C
L3031 SF 0110 W-102 n ABS UNI C
L3031 SF 0110 W-86 n ABS UNI C
L3031 SF 0110 W-200 n n n n n ABS UNI C
L3031 SF 0110 GLATT n n n ABS UNI C
L3031 SF 0110 W-105 n n n ABS UNI C
L3031 DC 707H W-79 n n ABS DC E
L304 SF 735A W-200 n n n ABS UNI C
L304 SF 735A W-87 n n n ABS UNI C
L3040 SF 735A W-200 n n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L3040 SF 735A W-87 n n n ABS UNI C
L305 SF 0650 W-200 n ABS UNI C
L3191 DC 325X GLATT n n ABS HG P
L3191 SF 862C W-200 n n n n n ABS UNI C
L3191 SF 862C W-87 n n n ABS UNI C
L3191 SF 862C W-224 n n ABS UNI C
L324 SF 0110 W-101 n n ABS UNI C
L324 SF 0110 W-102 n ABS UNI C
L324 SF 0110 W-86 n ABS UNI C
L324 SF 0110 W-200 n n n n n ABS UNI C
L324 SF 0110 GLATT n n n ABS UNI C
L324 SF 0110 W-105 n n n ABS UNI C
L3540 SF 404C W-200 n n ABS UNI C
L3540 SF 404C W-87 n n ABS UNI C
L3546 SF 0193 W-200 n n n ABS UNI C
L4030 DC 24Q7 GLATT n ABS HG P
L4030 SF 3311 W-200 n n n ABS UNI C
L4030 SF 3311 W-87 n n n n ABS UNI C
L4054 SF 158A W-200 n ABS UNI C
L4055 SF 2319 W-200 n n ABS UNI C
L4060 SF 5373 W-200 n n n ABS UNI C
L4068 SF 0222 W-200 n ABS UNI C
L4070 SF 015B W-200 n ABS UNI C
L4080 SF 579D W-87 n n n ABS UNI C
L4085 SF 39A1 W-87 n ABS UNI C
L4115 SF 6211 W-200 n n ABS UNI C
L4115 SF 6211 W-87 n n n ABS UNI C
L4116 DC 570V GLATT n ABS HG P
L4116 SF 5395 W-87 n n ABS UNI C
L4116 SF 5395 W-200 n n n n n ABS UNI C
L4118 SF 39A0 W-87 n ABS UNI C
L4132 SF 6214 W-200 n n ABS UNI C
L4136 SF 0717 W-200 n ABS UNI C
L4143 SF 583D W-200 n n ABS UNI C
L4143 DC 274V GLATT n ABS HG P
L4147 SF 5854 GLATT n ABS UNI C
L4147 SF 5854 W-87 n n ABS UNI C
L4147 SF 5854 W-200 n n n ABS UNI C
L4149 DC 557Y GLATT n ABS HG P
L4149 SF 207C W-200 n n n ABS UNI C
L4801 SF 336C W-200 n n n ABS UNI C
L5003 DC 18P8 GLATT n n ABS ALU-Folie P
244
244
244
244
243
245
238
244
244
243
243
243
240
240
240
240
240
245
245
239
246
240
240
240
240
240
236
240
240
231
239
229
236
236
236
236
236
236
265
245
245
245
245
238
229
246
246
246
236
236
236
236
236
236
241
241
237
229
241
241
240
240
243
237
236
243
241
244
244
230
243
243
241
244
238
243
229
243
243
243
230
240
241
228
R –
S
199unverbindliche Empfehlung | non-binding recommendation198
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation
Sonae / Tafibra
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
L514 DC 700R GLATT n n n 3D 3D P
L515 DC 702R GLATT n n 3D 3D P
L6062 SF 40A1 W-87 n n n ABS UNI C
L6063 SF 995E W-87 n ABS UNI C
L7943 SF 1086 W-87 n n ABS UNI C
L7943 SF 1086 W-200 n n n ABS UNI C
LE1732 SF 119A W-200 n ABS UNI C
M002 DC 108J W-200 n n ABS DC C
M012 DC 7977 W-105 n n n ABS DC C
M030 DC 959N W-87 n ABS DC C
M04119 DC 7422 GLATT n n n ABS DC C
M04129 DC 103V W-86 n ABS DC C
M04129 DC 103V W-88 n n n ABS DC C
M04181 DC 7977 W-105 n n n ABS DC C
M04224 DC 298J W-105 n ABS DC C
M06211 DC 630K W-87 n ABS DC C
M10037 DC 6996 W-200 n ABS DC C
M10074 DC 315K W-200 n ABS DC C
M1025 DC 7876 W-200 n n ABS DC C
M1076 DC 363V W-86 n n ABS DC C
M1076 DC 363V W-87 n ABS DC C
M113 DC 8166 W-200 n n ABS DC C
M12003 DC 012J W-200 n ABS DC C
M12064 DC 410K W-105 n n n n ABS DC C
M12084 DC 857J GLATT n ABS DC C
M125 DC 7871 W-200 n ABS DC C
M172 DC 6968 W-105 n n ABS DC C
M172 DC 6968 W-87 n ABS DC C
M172 DC 6968 W-86 n n ABS DC C
M175 DC 6794 W-88 n n ABS DC C
M186 DC 8978 W-88 n ABS DC C
M186 DC 8978 W-87 n ABS DC C
M2004 DC 7977 W-105 n n n ABS DC C
M2037 DC 538J GLATT n n ABS DC C
M2046 DC 102V W-86 n ABS DC C
M2106 DC 8021 W-88 n n n ABS DC C
M2106 DC 8021 W-200 n n ABS DC C
M2111 DC 8978 W-88 n ABS DC C
M2111 DC 8978 W-87 n ABS DC C
M2112 DC 569P W-87 n n ABS DC C
M2112 DC 569P W-200 n ABS DC C
M2113 DC 381N W-105 n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M2197 DC 15J4 W-111 n n n ABS DC E
M2420 DC 694L W-200 n ABS DC C
M2440 DC 012J W-200 n ABS DC C
M2451 DC 099V W-105 n ABS DC C
M2451 DC 099V W-86 n n n ABS DC C
M2452 DC 185L W-86 n n ABS DC C
M2459 DC 535N W-200 n n ABS DC C
M2469 DC 364P W-86 n n ABS DC C
M270 DC 8428 W-200 n n ABS DC C
M293 DC 064J W-200 n ABS DC C
M298 DC 062J W-105 n ABS DC C
M3099 DC 8647 W-200 n n n n ABS DC C
M3099 DC 8647 W-87 n n n ABS DC C
M316 DC 6635 W-88 n n ABS DC C
M3230 DC 165J W-200 n ABS DC C
M3247 DC 030J W-87 n n ABS DC C
M3247 DC 030J W-86 n ABS DC C
M3247 DC 030J W-200 n n n n ABS DC C
M3280 DC 6522 W-104 n ABS DC C
M3292 DC 359J W-88 n ABS DC C
M3292 DC 359J W-87 n ABS DC C
M335 DC 905X W-200 n n n ABS DC C
M3400 DC 7871 W-200 n ABS DC C
M3404 DC 6635 W-88 n n ABS DC C
M3518 DC 6569 W-200 n ABS DC C
M3520 DC 439M GLATT n n n ABS DC C
M3521 DC 7977 W-105 n n n ABS DC C
M3529 DC 6629 W-86 n n n ABS DC C
M3529 DC 6629 P7145 n n n ABS DC C
M3529 DC 6629 GLATT n n n ABS DC C
M3542 DC 6635 W-88 n n ABS DC C
M3547 DC 359J W-88 n ABS DC C
M3547 DC 359J W-87 n ABS DC C
M3558 DC 041U W-86 n n n n ABS DC C
M3569 DC 8176 W-88 n ABS DC C
M3580 DC 021K W-88 n n ABS DC C
M3582 DC 064K W-200 n n ABS DC C
M3584 DC 6629 W-86 n n n ABS DC C
M3584 DC 6629 P7145 n n n ABS DC C
M3584 DC 6629 GLATT n n n ABS DC C
M362 DC 8428 W-200 n n ABS DC C
M3662 DC 692Q W-200 n ABS DC C
223
223
241
246
239
239
239
251
267
271
266
251
251
267
255
262
264
256
267
257
257
268
250
258
268
267
264
264
264
264
270
270
267
261
251
267
267
270
270
261
261
257
252
264
250
251
251
253
261
257
268
251
251
269
269
263
252
250
250
250
262
257
257
270
267
263
262
258
267
263
263
263
263
257
257
250
268
250
251
263
263
263
268
264
R –
S
200 201unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Sonae / Tafibra
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M3729 DC 355Q GLATT n n ABS DC C
M3730 DC 76M1 W-86 n ABS DC C
M3730 DC 76M1 W-88 n n n ABS DC C
M3744 DC 679K W-200 n ABS DC C
M3744 DC 679K P7145 n n ABS DC C
M3789 DC 388U W-200 n ABS DC C
M3789 DC 388U W-87 n n n n ABS DC C
M381 DC 108J W-200 n n ABS DC C
M3813 DC 426H GLATT n ABS HG P
M3813 DC 283X W-87 n ABS DC C
M3813 DC 283X GLATT n n n ABS DC C
M3817 DC 6522 W-104 n ABS DC C
M3833 DC 6629 W-86 n n n ABS DC C
M3833 DC 6629 P7145 n n n ABS DC C
M3833 DC 6629 GLATT n n n ABS DC C
M3851 DC 281P GLATT n ABS DC C
M3861 DC 791V W-105 n ABS DC C
M3861 DC 791V W-86 n n n n ABS DC C
M3866 DC 538H W-200 n n ABS DC C
M3879 DC 6635 W-88 n n ABS DC C
M3892 DC 69M5 W-86 n n ABS DC C
M3893 DC 69M8 W-87 n n ABS DC C
M3894 DC 27K7 W-111 n ABS DC E
M3901 DC 913P GLATT n ABS DC C
M3901 DC 913P W-86 n n n n ABS DC C
M393 DC 694L W-200 n ABS DC C
M3964 DC 473X W-111 n n ABS DC E
M3965 DC 958N W-88 n ABS DC C
M4025 DC 655L GLATT n ABS DC C
M4222 DC 950V GLATT n ABS DC C
M424 DC 694L W-200 n ABS DC C
M4269 DC 6968 W-105 n n ABS DC C
M4269 DC 6968 W-87 n ABS DC C
M4269 DC 6968 W-86 n n ABS DC C
M4289 DC 958X GLATT n n ABS DC C
M4289 DC 958X P7145 n n ABS DC C
M434 DC 037J W-88 n ABS DC C
M434 DC 037J GLATT n ABS DC C
M4431 DC 03L0 W-86 n n ABS DC C
M4438 DC 185J W-87 n n ABS DC C
M4438 DC 185J W-88 n n n ABS DC C
M4438 DC 47K2 GLATT n ABS HG P
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M4451 DC 965X GLATT n ABS DC C
M4462 DC 656W W-86 n n n n ABS DC C
M447 DC 694L W-200 n ABS DC C
M4862 DC 19L6 W-105 n ABS DC C
M4867 DC 16J7 W-105 n n ABS DC C
M4867 DC 16J7 W-86 n n n ABS DC C
M4867 DC 16J7 W-87 n n ABS DC C
M489 DC 694L W-200 n ABS DC C
M4894 DC 69M6 W-86 n ABS DC C
M4894 DC 69M6 W-87 n ABS DC C
M516 DC 703Q W-86 n ABS DC C
M516 DC 703Q W-200 n ABS DC C
M516 DC 703Q W-87 n n n ABS DC C
M516 DC 703Q W-88 n n n ABS DC C
M6037 DC 65K2 W-111 n n ABS DC E
M6046 DC 72M1 W-111 n n n ABS DC E
M6047 DC 70M1 W-111 n n ABS DC E
M6048 DC 283X W-87 n ABS DC C
M6048 DC 283X GLATT n n n ABS DC C
M6050 DC 65K3 W-111 n n n n ABS DC E
M6052 DC 53J7 W-200 n ABS DC C
M6053 DC 72M8 W-111 n ABS DC E
M6054 DC 72M5 W-111 n n ABS DC E
M6055 DC 72M6 W-111 n n n ABS DC E
M6061 DC 361H W-106 n ABS DC C
M6061 DC 361H GLATT n n n ABS DC C
M6061 DC 46P8 GLATT n ABS HG P
M6065 DC 72M2 W-86 n ABS DC C
M6066 DC 72M3 W-86 n ABS DC C
M611 DC 064J W-200 n ABS DC C
M685 DC 8166 W-200 n n ABS DC C
M690 DC 202X W-102 n n n ABS DC E
M700 DC 216J W-87 n n ABS DC C
M711 DC 7191 W-88 n ABS DC C
M713 DC 8021 W-88 n n n ABS DC C
M713 DC 8021 W-200 n n ABS DC C
M742 DC 694L W-200 n ABS DC C
M750 DC 708N W-200 n ABS DC C
M750 DC 708N W-87 n n n n ABS DC C
M756 DC 040V W-86 n n ABS DC C
M807 DC 31J4 W-105 n ABS DC C
M807 DC 31J4 W-86 n n ABS DC C
257
267
267
264
264
257
257
251
229
255
255
262
263
263
263
255
267
267
261
263
264
264
255
270
270
264
260
271
262
271
264
264
264
264
271
271
250
250
250
253
253
229
271
262
264
253
253
253
253
264
264
264
265
265
265
265
262
266
265
255
255
262
261
266
266
266
257
257
229
266
266
251
268
272
254
265
267
267
264
265
265
250
256
256
R –
S
202 203unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Sonae / TafibraStarwood
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M836 DC 316N W-200 n ABS DC C
M836 DC 316N W-87 n n ABS DC C
M850 DC 694L W-200 n ABS DC C
M854 DC 7871 W-200 n ABS DC C
M900 DC 8166 W-200 n n ABS DC C
M9001 DC 204J W-105 n ABS DC C
M9001 DC 204J W-224 n n n n ABS DC C
M9009 DC 099V W-105 n ABS DC C
M9009 DC 099V W-86 n n n ABS DC C
M911 DC 356Q GLATT n ABS DC C
M925 DC 954M W-105 n n ABS DC C
M925 DC 954M W-200 n ABS DC C
M925 DC 954M W-87 n n n n ABS DC C
M932 DC 7977 W-105 n n n ABS DC C
M962 DC 6635 W-88 n n ABS DC C
M967 DC 954M W-105 n n ABS DC C
M967 DC 954M W-200 n ABS DC C
M967 DC 954M W-87 n n n n ABS DC C
M973 DC 216J W-87 n n ABS DC C
M976 DC 506W W-105 n ABS DC C
M981 DC 703Q W-86 n ABS DC C
M981 DC 703Q W-200 n ABS DC C
M981 DC 703Q W-87 n n n ABS DC C
M981 DC 703Q W-88 n n n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
StarwoodPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0001 SF 6444 W-200 n n n ABS UNI C
0001 SF 6444 GLATT n n ABS UNI C
0002 SF 0110 W-101 n n ABS UNI C
0002 SF 0110 W-102 n ABS UNI C
0002 SF 0110 W-86 n ABS UNI C
0002 SF 0110 W-200 n n n n n ABS UNI C
0002 SF 0110 GLATT n n n ABS UNI C
0002 SF 0110 W-105 n n n ABS UNI C
0006 DC 7855 W-105 n ABS DC C
0008 DC 958X GLATT n n ABS DC C
0008 DC 958X P7145 n n ABS DC C
0026 SF 580D W-87 n n n ABS UNI C
0029 SF 5026 W-200 n ABS UNI C
0030 DC 148J W-105 n n n n ABS DC C
0032 DC 535N W-200 n n ABS DC C
0042 SF 0707 W-200 n ABS UNI C
0042 SF 0707 W-86 n n n ABS UNI C
0046 DC 397J W-105 n n ABS DC C
0047 DC 727L W-200 n n ABS DC C
0049 DC 904X W-105 n n ABS DC C
0051 DC 954M W-105 n n ABS DC C
0051 DC 954M W-200 n ABS DC C
0051 DC 954M W-87 n n n n ABS DC C
0054 SF 482B P7166 n ABS UNI C
0056 SF 447C W-200 n n ABS UNI C
0057 DC 7422 GLATT n n n ABS DC C
0059 DC 09J7 W-86 n ABS DC E
0064 SF 511A W-200 n n ABS UNI C
0066 SF 1083 W-200 n n ABS UNI C
0076 DC 253U W-88 n n ABS DC C
0076 DC 253U W-105 n n n ABS DC C
0077 DC 410K W-105 n n n n ABS DC C
256
256
264
267
268
254
254
251
251
257
271
271
271
267
263
271
271
271
254
260
265
265
265
265
245
245
236
236
236
236
236
236
267
271
271
243
243
252
261
238
238
258
266
270
271
271
271
242
242
266
251
243
238
254
254
258
T –
Z
204 205unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Teverpan / TevermdfTop Form
Döllken-Kanten passend zu | Döllken Edgebands to match
Teverpan / TevermdfPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
M01 SF 6346 W-200 n n n n n ABS UNI C
M01 SF 6346 GLATT n n n n n ABS UNI C
M01 SF 6346 W-101 n n n ABS UNI C
M01 SF 6346 W-87 n n n ABS UNI C
M01 SF 6346 W-105 n n n n ABS UNI C
M01 SF 6346 W-102 n n n ABS UNI C
M01 SF 6346 W-224 n n ABS UNI C
M10 DC 7871 W-200 n ABS DC C
M14 SF 482B P7166 n ABS UNI C
M19 DC 7008 W-88 n n n ABS DC C
M19 DC 7008 W-87 n n ABS DC C
M31 DC 694L W-200 n ABS DC C
M32 DC 363V W-86 n n ABS DC C
M32 DC 363V W-87 n ABS DC C
M33 DC 954M W-105 n n ABS DC C
M33 DC 954M W-200 n ABS DC C
M33 DC 954M W-87 n n n n ABS DC C
M35 SF 0110 W-101 n n ABS UNI C
M35 SF 0110 W-102 n ABS UNI C
M35 SF 0110 W-86 n ABS UNI C
M35 SF 0110 W-200 n n n n n ABS UNI C
M35 SF 0110 GLATT n n n ABS UNI C
M35 SF 0110 W-105 n n n ABS UNI C
M36 SF 3311 W-200 n n n ABS UNI C
M36 SF 3311 W-87 n n n n ABS UNI C
M37 DC 703Q W-86 n ABS DC C
M37 DC 703Q W-200 n ABS DC C
M37 DC 703Q W-87 n n n ABS DC C
M37 DC 703Q W-88 n n n ABS DC C
M38 DC 535N W-200 n n ABS DC C
M41 DC 535N W-200 n n ABS DC C
M42 DC 958N W-88 n ABS DC C
M43 DC 797K W-200 n n ABS DC E
M43 DC 797K W-86 n ABS DC E
M48 DC 727L W-200 n n ABS DC C
M55 SF 6208 W-200 n n n n ABS UNI C
M55 SF 6208 W-86 n n n n ABS UNI C
M58 DC 135M W-200 n n n ABS DC C
M59 DC 646N P7166 n ABS DC C
M59 DC 646N P7145 n n n ABS DC C
Döllken-Kanten passend zu | Döllken Edgebands to match
Top FormPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
3091 DC 19R8 GLATT n 3D 3D 2in1 P
3091 DC 78R4 GLATT n 3D DuoGloss P
3091 DC 154W GLATT n ABS HG P
3273 DC 31R5 GLATT n 3D 3D 2in1 P
COA-221 DC 38R4 GLATT n 3D 3D 2in1 P
COV-222 DC 23R6 GLATT n 3D 3D 2in1 P
COY-233 DC 35R4 GLATT n 3D 3D 2in1 P
GLA-270 DC 37R6 GLATT n 3D 3D 2in1 P
GLB-247 DC 24R2 GLATT n 3D 3D 2in1 P
GLC-158 DC 23R5 GLATT n 3D 3D 2in1 P
GLD-410 DC 35R2 GLATT n 3D 3D 2in1 P
GLG-400 DC 35R1 GLATT n 3D 3D 2in1 P
GLH-405 DC 23R8 GLATT n 3D 3D 2in1 P
GLK-401 DC 24R1 GLATT n 3D 3D 2in1 P
GLM-246 DC 24R4 GLATT n 3D 3D 2in1 P
GLN-156 DC 23R9 GLATT n 3D 3D 2in1 P
GLO-122 DC 24R0 GLATT n 3D 3D 2in1 P
GLP-283 DC 19R6 GLATT n 3D 3D 2in1 P
GLP-283 DC 78R6 GLATT n 3D DuoGloss P
GLP-283 DC 155W GLATT n ABS HG P
GLR-244 DC 35R0 GLATT n 3D 3D 2in1 P
GLS-248 DC 31R3 GLATT n 3D 3D 2in1 P
GLV-157 DC 31R4 GLATT n 3D 3D 2in1 P
MTA-768 DC 59R2 GLATT n 3D 3D 2in1 P
MTC-769 DC 59R3 GLATT n 3D 3D 2in1 P
MTM-764 DC 59R4 GLATT n 3D 3D 2in1 P
MTV-767 DC 59R5 GLATT n 3D 3D 2in1 P
XTB-930 DC 19R8 GLATT n 3D 3D 2in1 P
XTB-930 DC 78R4 GLATT n 3D DuoGloss P
XTC-937 DC 23R5 GLATT n 3D 3D 2in1 P
XTG-935 DC 71R0 GLATT n 3D 3D 2in1 P
XTI-934 DC 48R4 GLATT n 3D 3D 2in1 P
XTK-933 DC 71R1 GLATT n 3D 3D 2in1 P
XTP-931 DC 19R6 GLATT n 3D 3D 2in1 P
XTP-931 DC 78R6 GLATT n 3D DuoGloss P
XTR-932 DC 71R2 GLATT n 3D 3D 2in1 P
XTV-940 DC 48R6 GLATT n 3D 3D 2in1 P
XTZ-936 DC 61R7 GLATT n 3D 3D 2in1 P
244
244
244
244
244
244
244
267
242
265
265
264
257
257
271
271
271
236
236
236
236
236
236
241
241
265
265
265
265
261
261
271
267
267
266
244
244
252
262
262
222
224
228
223
223
222
223
223
222
222
223
223
222
222
222
222
222
222
224
228
223
222
223
223
223
223
223
222
224
222
223
223
223
222
224
223
223
223
T –
Z
206 207unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Unilin
Döllken-Kanten passend zu | Döllken Edgebands to match
UnilinPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
0040 SF 6346 W-200 n n n n n ABS UNI C
0040 SF 6346 GLATT n n n n n ABS UNI C
0040 SF 6346 W-101 n n n ABS UNI C
0040 SF 6346 W-87 n n n ABS UNI C
0040 SF 6346 W-105 n n n n ABS UNI C
0040 SF 6346 W-102 n n n ABS UNI C
0040 SF 6346 W-224 n n ABS UNI C
0045 SF 6346 W-200 n n n n n ABS UNI C
0045 SF 6346 GLATT n n n n n ABS UNI C
0045 SF 6346 W-101 n n n ABS UNI C
0045 SF 6346 W-87 n n n ABS UNI C
0045 SF 6346 W-105 n n n n ABS UNI C
0045 SF 6346 W-102 n n n ABS UNI C
0045 SF 6346 W-224 n n ABS UNI C
0102 SF 6414 W-200 n n n ABS UNI C
0113 SF 0110 W-101 n n ABS UNI C
0113 SF 0110 W-102 n ABS UNI C
0113 SF 0110 W-86 n ABS UNI C
0113 SF 0110 W-200 n n n n n ABS UNI C
0113 SF 0110 GLATT n n n ABS UNI C
0113 SF 0110 W-105 n n n ABS UNI C
0551 SF 6214 W-200 n n ABS UNI C
0585 DC 784J W-104 n ABS DC C
0585 DC 784J W-88 n ABS DC C
0588 SF 6414 W-200 n n n ABS UNI C
0616 DC 954M W-105 n n ABS DC C
0616 DC 954M W-200 n ABS DC C
0616 DC 954M W-87 n n n n ABS DC C
0622 SF 6414 W-200 n n n ABS UNI C
0638 DC 7871 W-200 n ABS DC C
0852 DC 021K W-88 n n ABS DC C
622 SF 561D W-200 n n n ABS UNI C
D577 SF 4861 W-101 n n n ABS UNI C
D577 SF 4861 W-200 n n n ABS UNI C
D707 SF 6214 W-200 n n ABS UNI C
D708 SF 6107 W-200 n ABS UNI C
D735 DC 6629 W-86 n n n ABS DC C
D735 DC 6629 P7145 n n n ABS DC C
D735 DC 6629 GLATT n n n ABS DC C
D760 DC 797K W-200 n n ABS DC E
D760 DC 797K W-86 n ABS DC E
D979 DC 6629 W-86 n n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
D979 DC 6629 P7145 n n n ABS DC C
D979 DC 6629 GLATT n n n ABS DC C
F905 DC 7099 W-200 n n ABS DC E
F933 DC 502L GLATT n n n ABS DC E
F939 DC 8525 W-200 n n n n n ABS DC E
F970 DC 435K GLATT n ABS DC E
H304 DC 298J W-105 n ABS DC C
H320 DC 083V P7166 n ABS DC C
H327 DC 8631 W-88 n n n n ABS DC C
H337 DC 958X GLATT n n ABS DC C
H337 DC 958X P7145 n n ABS DC C
H339 DC 216J W-87 n n ABS DC C
H349 DC 96N8 W-88 n ABS DC C
H362 DC 999J W-105 n n ABS DC C
H362 DC 999J W-87 n ABS DC C
H378 DC 191Q W-200 n ABS DC C
H387 DC 791V W-105 n ABS DC C
H387 DC 791V W-86 n n n n ABS DC C
H425 DC 556H W-111 n ABS DC E
H456 DC 7422 GLATT n n n ABS DC C
H457 DC 7871 W-200 n ABS DC C
H460 DC 8021 W-88 n n n ABS DC C
H460 DC 8021 W-200 n n ABS DC C
H461 DC 655L GLATT n ABS DC C
H470 DC 694L W-200 n ABS DC C
H472 DC 703Q W-86 n ABS DC C
H472 DC 703Q W-200 n ABS DC C
H472 DC 703Q W-87 n n n ABS DC C
H472 DC 703Q W-88 n n n ABS DC C
H482 DC 728L W-200 n n ABS DC C
H501 DC 138V W-200 n n n ABS DC C
H501 DC 138V P7145 n n n ABS DC C
H519 DC 316N W-200 n ABS DC C
H519 DC 316N W-87 n n ABS DC C
H523 DC 954M W-105 n n ABS DC C
H523 DC 954M W-200 n ABS DC C
H523 DC 954M W-87 n n n n ABS DC C
H528 DC 316N W-200 n ABS DC C
H528 DC 316N W-87 n n ABS DC C
H534 DC 7876 W-200 n n ABS DC C
H559 DC 281P GLATT n ABS DC C
H562 DC 55L4 W-86 n n ABS DC C
244
244
244
244
244
244
244
244
244
244
244
244
244
244
245
236
236
236
236
236
236
244
267
267
245
271
271
271
245
267
250
243
242
242
244
244
263
263
263
267
267
263
263
263
265
260
268
258
255
251
268
271
271
254
271
272
272
253
267
267
261
266
267
267
267
262
264
265
265
265
265
266
252
252
256
256
271
271
271
256
256
267
255
261
T –
Z
208 209unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Unilin
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
H578 DC 27K7 W-111 n ABS DC E
H603 DC 8428 W-200 n n ABS DC C
H609 DC 185L W-86 n n ABS DC C
H609 DC 6629 W-86 n n n ABS DC C
H609 DC 6629 P7145 n n n ABS DC C
H609 DC 6629 GLATT n n n ABS DC C
H624 DC 878H W-200 n n ABS DC C
H680 DC 12L8 W-86 n n ABS DC C
H682 DC 203X W-102 n n n ABS DC E
H683 DC 185J W-87 n n ABS DC C
H683 DC 185J W-88 n n n ABS DC C
H685 DC 630K W-87 n ABS DC C
H686 DC 185L W-86 n n ABS DC C
H690 DC 185J W-87 n n ABS DC C
H690 DC 185J W-88 n n n ABS DC C
H704 DC 6629 W-86 n n n ABS DC C
H704 DC 6629 P7145 n n n ABS DC C
H704 DC 6629 GLATT n n n ABS DC C
H713 DC 359J W-88 n ABS DC C
H713 DC 359J W-87 n ABS DC C
H717 DC 216J W-87 n n ABS DC C
H718 DC 439M GLATT n n n ABS DC C
H719 DC 8166 W-200 n n ABS DC C
H720 DC 185L W-86 n n ABS DC C
H726 DC 679K W-200 n ABS DC C
H726 DC 679K P7145 n n ABS DC C
H739 DC 18L6 W-87 n n n n ABS DC C
H740 DC 494J W-105 n ABS DC C
H741 DC 359J W-88 n ABS DC C
H741 DC 359J W-87 n ABS DC C
H742 DC 703Q W-86 n ABS DC C
H742 DC 703Q W-200 n ABS DC C
H742 DC 703Q W-87 n n n ABS DC C
H742 DC 703Q W-88 n n n ABS DC C
H803 DC 6629 W-86 n n n ABS DC C
H803 DC 6629 P7145 n n n ABS DC C
H803 DC 6629 GLATT n n n ABS DC C
H804 DC 185L W-86 n n ABS DC C
H807 DC 654L GLATT n ABS DC C
H811 DC 708N W-200 n ABS DC C
H811 DC 708N W-87 n n n n ABS DC C
HD56 DC 440U W-87 n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
HD78 DC 6635 W-88 n n ABS DC C
U115 SF 922B W-200 n n ABS UNI C
U118 SF 286E W-86 n n n ABS UNI C
U213 SF 4678 W-200 n n ABS UNI C
U216 SF 1138 W-200 n n n ABS UNI C
U222 SF 5854 GLATT n ABS UNI C
U222 SF 5854 W-87 n n ABS UNI C
U222 SF 5854 W-200 n n n ABS UNI C
U228 SF 6414 W-200 n n n ABS UNI C
U242 SF 1167 W-200 n ABS UNI C
U246 SF 6211 W-200 n n ABS UNI C
U246 SF 6211 W-87 n n n ABS UNI C
U249 SF 1402 W-200 n n n n ABS UNI C
U251 SF 1086 W-87 n n ABS UNI C
U251 SF 1086 W-200 n n n ABS UNI C
U265 SF 0436 W-200 n n ABS UNI C
U267 SF 119A W-200 n ABS UNI C
U268 SF 864A W-87 n n n ABS UNI C
U270 SF 580D W-87 n n n ABS UNI C
U271 SF 6241 W-101 n n ABS UNI C
U271 SF 6241 W-200 n n n ABS UNI C
U272 SF 578D W-87 n n n ABS UNI C
U273 SF 447C W-200 n n ABS UNI C
U275 DC 951Y GLATT n ABS HG P
U276 SF 0189 W-200 n ABS UNI C
U278 SF 0707 W-200 n ABS UNI C
U278 SF 0707 W-86 n n n ABS UNI C
U279 SF 261D W-200 n n ABS UNI C
U281 SF 1086 W-87 n n ABS UNI C
U281 SF 1086 W-200 n n n ABS UNI C
U284 SF 076C W-200 n ABS UNI C
U285 SF 169C W-87 n n ABS UNI C
U285 SF 169C W-200 n n n ABS UNI C
U287 SF 066D W-200 n ABS UNI C
U289 SF 288B W-200 n n ABS UNI C
U292 SF 1196 W-200 n ABS UNI C
UD06 SF 3311 W-200 n n n ABS UNI C
UD06 SF 3311 W-87 n n n n ABS UNI C
UD26 SF 0222 W-200 n ABS UNI C
UD35 SF 0110 W-101 n n ABS UNI C
UD35 SF 0110 W-102 n ABS UNI C
UD35 SF 0110 W-86 n ABS UNI C
255
268
253
263
263
263
269
252
254
253
253
262
253
253
253
263
263
263
257
257
254
258
268
253
264
264
253
260
257
257
265
265
265
265
263
263
263
253
262
265
265
258
263
246
240
242
239
243
243
243
245
239
244
244
239
239
239
237
239
246
243
244
244
243
242
232
237
238
238
240
239
239
238
240
240
238
241
239
241
241
237
236
236
236
T –
Z
211
3D-, ABS- und HG-Artikel sind in Sonderbreiten in der angegebenen Stärke verfügbar, aber nicht flexibel schneidbar. Die Breiten entnehmen Sie bitte der Kanten-Galerie oder dem Kanten-Finder. 3D, ABS and HG articles are available in special widths and at the specified thickness, but they cannot be flexibly cut. Please refer to the Edgeband Gallery or the Edgeband Finder for available widths.
unverbindliche Empfehlung | non-binding recommendation210 unverbindliche Empfehlung | non-binding recommendation
Unilin Westag & Getalit
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
UD35 SF 0110 W-200 n n n n n ABS UNI C
UD35 SF 0110 GLATT n n n ABS UNI C
UD35 SF 0110 W-105 n n n ABS UNI C
UD35 DC 707H W-79 n n ABS DC E
UD59 SF 221A W-200 n ABS UNI C
UD72 SF 1153 W-200 n ABS UNI C
UD81 SF 0711 W-200 n n n ABS UNI C
UD96 SF 1878 GLATT n n ABS UNI C
UD96 SF 1878 W-200 n n n n ABS UNI C
UD96 SF 1878 W-101 n n n ABS UNI C
UD96 SF 1878 W-87 n n n n ABS UNI C
UD96 SF 1878 W-224 n n ABS UNI C
UD98 SF 4678 W-200 n n ABS UNI C
WE12 SF 6346 W-200 n n n n n ABS UNI C
WE12 SF 6346 GLATT n n n n n ABS UNI C
WE12 SF 6346 W-101 n n n ABS UNI C
WE12 SF 6346 W-87 n n n ABS UNI C
WE12 SF 6346 W-105 n n n n ABS UNI C
WE12 SF 6346 W-102 n n n ABS UNI C
WE12 SF 6346 W-224 n n ABS UNI C
WE13 SF 4693 W-87 n n ABS UNI C
WE13 SF 4693 W-101 n n n ABS UNI C
WE13 SF 4693 W-200 n n n n ABS UNI C
WE13 SF 4693 GLATT n n n n ABS UNI C
WE13 SF 4693 W-86 n n n n ABS UNI C
WE13 SF 4693 W-88 n n ABS UNI C
WE13 DC 706H W-79 n n n ABS DC E
WE9 SF 6346 W-200 n n n n n ABS UNI C
WE9 SF 6346 GLATT n n n n n ABS UNI C
WE9 SF 6346 W-101 n n n ABS UNI C
WE9 SF 6346 W-87 n n n ABS UNI C
WE9 SF 6346 W-105 n n n n ABS UNI C
WE9 SF 6346 W-102 n n n ABS UNI C
WE9 SF 6346 W-224 n n ABS UNI C
Döllken-Kanten passend zu | Döllken Edgebands to match
Westag & GetalitPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
A1 SF 0110 W-101 n n ABS UNI C
A1 SF 0110 W-102 n ABS UNI C
A1 SF 0110 W-86 n ABS UNI C
A1 DC 319V GLATT n n n ABS HG P
A1 SF 0110 W-200 n n n n n ABS UNI C
A1 SF 0110 GLATT n n n ABS UNI C
A1 SF 0110 W-105 n n n ABS UNI C
A10 SF 0110 W-101 n n ABS UNI C
A10 SF 0110 W-102 n ABS UNI C
A10 SF 0110 W-86 n ABS UNI C
A10 SF 0110 W-200 n n n n n ABS UNI C
A10 SF 0110 GLATT n n n ABS UNI C
A10 SF 0110 W-105 n n n ABS UNI C
A14 SF 5992 W-200 n n n n n ABS UNI C
A14 SF 5992 W-224 n n ABS UNI C
A202 SF 617E W-200 n ABS UNI C
A202 SF 617E W-86 n n ABS UNI C
A202 SF 617E W-79 n n ABS UNI C
A22 SF 6346 W-200 n n n n n ABS UNI C
A22 SF 6346 GLATT n n n n n ABS UNI C
A22 SF 6346 W-101 n n n ABS UNI C
A22 SF 6346 W-87 n n n ABS UNI C
A22 SF 6346 W-105 n n n n ABS UNI C
A22 SF 6346 W-102 n n n ABS UNI C
A22 SF 6346 W-224 n n ABS UNI C
A222 SF 4693 W-87 n n ABS UNI C
A222 DC 498V GLATT n n n ABS HG P
A222 SF 4693 W-101 n n n ABS UNI C
A222 SF 4693 W-200 n n n n ABS UNI C
A222 SF 4693 GLATT n n n n ABS UNI C
A222 SF 4693 W-86 n n n n ABS UNI C
A222 SF 4693 W-88 n n ABS UNI C
A224 SF 4693 W-87 n n ABS UNI C
A224 SF 4693 W-101 n n n ABS UNI C
A224 SF 4693 W-200 n n n n ABS UNI C
A224 SF 4693 GLATT n n n n ABS UNI C
A224 SF 4693 W-86 n n n n ABS UNI C
A224 SF 4693 W-88 n n ABS UNI C
A242 SF 6346 W-200 n n n n n ABS UNI C
A242 SF 6346 GLATT n n n n n ABS UNI C
A242 SF 6346 W-101 n n n ABS UNI C
A242 SF 6346 W-87 n n n ABS UNI C
236
236
236
265
240
239
238
240
240
240
240
240
242
244
244
244
244
244
244
244
242
242
242
242
242
242
265
244
244
244
244
244
244
244
236
236
236
229
236
236
236
236
236
236
236
236
236
244
244
244
244
244
244
244
244
244
244
244
244
242
230
242
242
242
242
242
242
242
242
242
242
242
244
244
244
244
T –
Z
212 213unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Westag & Getalit
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
A242 SF 6346 W-105 n n n n ABS UNI C
A242 SF 6346 W-102 n n n ABS UNI C
A242 SF 6346 W-224 n n ABS UNI C
A302 SF 6414 W-200 n n n ABS UNI C
A303 SF 6414 W-200 n n n ABS UNI C
A32 SF 1047 W-200 n ABS UNI C
A32 SF 1047 W-87 n ABS UNI C
A330 SF 1138 W-200 n n n ABS UNI C
A336 DC 529Y GLATT n ABS HG P
A336 SF 1085 W-200 n n n ABS UNI C
A340 SF 5373 W-200 n n n ABS UNI C
A343 SF 735A W-200 n n n ABS UNI C
A343 SF 735A W-87 n n n ABS UNI C
A345 SF 6008 W-200 n n ABS UNI C
A346 SF 6192 W-200 n ABS UNI C
A4 SF 4861 W-101 n n n ABS UNI C
A4 SF 4861 W-200 n n n ABS UNI C
A4 SF 6170 W-200 n n n n ABS UNI C
A400 SF 1081 W-87 n n n n ABS UNI C
A402 DC 25R0 GLATT n 3D 3D 2in1 P
A402 SF 1878 GLATT n n ABS UNI C
A402 DC 31L2 GLATT n ABS HG P
A402 SF 1878 W-200 n n n n ABS UNI C
A402 SF 1878 W-101 n n n ABS UNI C
A402 SF 1878 W-87 n n n n ABS UNI C
A402 SF 1878 W-224 n n ABS UNI C
A407 SF 288B W-200 n n ABS UNI C
A41 SF 0711 W-200 n n n ABS UNI C
A412 SF 0549 W-200 n n n n ABS UNI C
A42 SF 2319 W-200 n n ABS UNI C
A420 SF 1878 GLATT n n ABS UNI C
A420 SF 1878 W-200 n n n n ABS UNI C
A420 SF 1878 W-101 n n n ABS UNI C
A420 SF 1878 W-87 n n n n ABS UNI C
A420 SF 1878 W-224 n n ABS UNI C
A421 SF 0179 W-200 n n n ABS UNI C
A421 SF 0179 W-87 n n n n ABS UNI C
A434 SF 1878 GLATT n n ABS UNI C
A434 SF 1878 W-200 n n n n ABS UNI C
A434 SF 1878 W-101 n n n ABS UNI C
A434 SF 1878 W-87 n n n n ABS UNI C
A434 SF 1878 W-224 n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
A60 SF 5395 W-87 n n ABS UNI C
A60 SF 5395 W-200 n n n n n ABS UNI C
A623 DC 25R1 GLATT n 3D 3D 2in1 P
A623 DC 274V GLATT n ABS HG P
A711 SF 6082 W-200 n n ABS UNI C
A887 SF 482B P7166 n ABS UNI C
A920 SF 511A W-200 n n ABS UNI C
A922 SF 0707 W-200 n ABS UNI C
A922 SF 0707 W-86 n n n ABS UNI C
A937 SF 5854 GLATT n ABS UNI C
A937 SF 5854 W-87 n n ABS UNI C
A937 SF 5854 W-200 n n n ABS UNI C
AH236 DC 8166 W-200 n n ABS DC C
AH335 DC 8166 W-200 n n ABS DC C
AH737 DC 352Q W-88 n n ABS DC C
AH737 DC 352Q W-200 n ABS DC C
AHB314 DC 216J W-87 n n ABS DC C
AN654 DC 727L W-200 n n ABS DC C
B292 DC 188U W-86 n ABS DC C
BB634 DC 708N W-200 n ABS DC C
BB634 DC 708N W-87 n n n n ABS DC C
BB764 DC 8428 W-200 n n ABS DC C
BBL259 DC 8437 W-200 n n n ABS DC C
BBL272 DC 359J W-88 n ABS DC C
BBL272 DC 359J W-87 n ABS DC C
BBL276 DC 359J W-88 n ABS DC C
BBL276 DC 359J W-87 n ABS DC C
BBL714 DC 913L W-87 n n n ABS DC C
BE314 DC 6635 W-88 n n ABS DC C
BE316 DC 7855 W-105 n ABS DC C
BE730 DC 784J W-104 n ABS DC C
BE730 DC 784J W-88 n ABS DC C
BK373 DC 283P GLATT n n ABS DC C
BK636 DC 708N W-200 n ABS DC C
BK636 DC 708N W-87 n n n n ABS DC C
BU33 DC 8978 W-88 n ABS DC C
BU33 DC 8978 W-87 n ABS DC C
BU331 DC 569P W-87 n n ABS DC C
BU331 DC 569P W-200 n ABS DC C
BU36 DC 030J W-87 n n ABS DC C
BU36 DC 030J W-86 n ABS DC C
BU36 DC 030J W-200 n n n n ABS DC C
244
244
244
245
245
238
238
239
230
238
243
245
245
244
244
242
242
244
238
222
240
229
240
240
240
240
241
238
237
240
240
240
240
240
240
236
236
240
240
240
240
240
243
243
222
229
244
242
243
238
238
243
243
243
268
268
256
256
254
266
253
265
265
268
268
257
257
257
257
270
263
267
267
267
255
265
265
270
270
261
261
250
250
250
T –
Z
214 215unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Westag & Getalit
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
BU641 DC 064K W-200 n n ABS DC C
BU663 DC 569P W-87 n n ABS DC C
BU663 DC 569P W-200 n ABS DC C
BU76 DC 6794 W-88 n n ABS DC C
BU89 DC 064K W-200 n n ABS DC C
BUQ641 DC 954M W-105 n n ABS DC C
BUQ641 DC 954M W-200 n ABS DC C
BUQ641 DC 954M W-87 n n n n ABS DC C
EB300 DC 8150 W-88 n ABS DC C
EB308 DC 6635 W-88 n n ABS DC C
EB334 DC 784J W-104 n ABS DC C
EB334 DC 784J W-88 n ABS DC C
EB730 DC 655L GLATT n ABS DC C
EI308 DC 6635 W-88 n n ABS DC C
EI746 DC 276W W-200 n n ABS DC C
EIP328 DC 204J W-105 n ABS DC C
EIP328 DC 204J W-224 n n n n ABS DC C
ES308 DC 6635 W-88 n n ABS DC C
ESE33 DC 108J W-200 n n ABS DC C
HA32 DC 8166 W-200 n n ABS DC C
KB697 DC 7422 GLATT n n n ABS DC C
KB722 DC 062J W-105 n ABS DC C
KB749 DC 694L W-200 n ABS DC C
KB793 DC 037J W-88 n ABS DC C
KB793 DC 037J GLATT n ABS DC C
MKA118 DC 692Q W-200 n ABS DC C
NU725 DC 422H W-88 n ABS DC C
P112 SF 4678 W-200 n n ABS UNI C
P233 SF 1083 W-200 n n ABS UNI C
P451 SF 1081 W-87 n n n n ABS UNI C
P451 SF 0693 W-200 n n ABS UNI C
P606 SF 5395 W-87 n n ABS UNI C
P606 SF 5395 W-200 n n n n n ABS UNI C
P913 SF 1167 W-200 n ABS UNI C
P918 SF 1167 W-200 n ABS UNI C
PI773 DC 363V W-86 n n ABS DC C
PI773 DC 363V W-87 n ABS DC C
R24 SF 1083 W-200 n n ABS UNI C
RS431 DC 7099 W-200 n n ABS DC E
RÜ339 DC 108J W-200 n n ABS DC C
TN543 SF 580D W-87 n n n ABS UNI C
W701 DC 185J W-87 n n ABS DC C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
W701 DC 185J W-88 n n n ABS DC C
WE716 DC 363V W-86 n n ABS DC C
WE716 DC 363V W-87 n ABS DC C
ZO793 DC 185J W-87 n n ABS DC C
ZO793 DC 185J W-88 n n n ABS DC C
251
261
261
264
251
271
271
271
267
263
267
267
262
263
255
254
254
263
251
268
266
251
264
250
250
264
258
242
238
238
238
243
243
239
239
257
257
238
265
251
243
253
253
257
257
253
253
T –
Z
216 217unverbindliche Empfehlung | non-binding recommendationunverbindliche Empfehlung | non-binding recommendation
Xilopan
Döllken-Kanten passend zu | Döllken Edgebands to match
XilopanPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
A27 DC 999J W-105 n n ABS DC C
A27 DC 999J W-87 n ABS DC C
A28 DC 596J W-200 n n ABS DC C
C19 DC 7422 GLATT n n n ABS DC C
C27 DC 13L8 W-86 n n n ABS DC C
C28 DC 6996 W-200 n ABS DC C
C29 DC 554K W-200 n ABS DC C
C31 DC 8428 W-200 n n ABS DC C
C32 DC 580M W-87 n n ABS DC C
C34 DC 727L W-200 n n ABS DC C
F23 DC 179K W-105 n n n ABS DC C
F27 DC 03L0 W-86 n n ABS DC C
F28 DC 677N W-88 n n ABS DC C
N02 DC 959N W-87 n ABS DC C
N03 DC 8677 W-200 n n ABS DC C
N03 DC 8677 W-106 n ABS DC C
N06 DC 099V W-105 n ABS DC C
N06 DC 099V W-86 n n n ABS DC C
N07 DC 10L1 W-87 n n n ABS DC C
N12 DC 535N W-200 n n ABS DC C
N17 DC 535U W-86 n ABS DC C
N20 DC 149J W-200 n ABS DC C
R31 DC 58L2 P7170 n ABS DC C
R32 DC 7977 W-105 n n n ABS DC C
R36 DC 958X GLATT n n ABS DC C
R36 DC 958X P7145 n n ABS DC C
R38 DC 283P GLATT n n ABS DC C
S38 DC 8166 W-200 n n ABS DC C
U08 SF 6444 W-200 n n n ABS UNI C
U08 SF 6444 GLATT n n ABS UNI C
U12 SF 6346 W-200 n n n n n ABS UNI C
U12 SF 6346 GLATT n n n n n ABS UNI C
U12 SF 6346 W-101 n n n ABS UNI C
U12 SF 6346 W-87 n n n ABS UNI C
U12 SF 6346 W-105 n n n n ABS UNI C
U12 SF 6346 W-102 n n n ABS UNI C
U12 SF 6346 W-224 n n ABS UNI C
U16 SF 4693 W-87 n n ABS UNI C
U16 SF 4693 W-101 n n n ABS UNI C
U16 SF 4693 W-200 n n n n ABS UNI C
U16 SF 4693 GLATT n n n n ABS UNI C
U16 SF 4693 W-86 n n n n ABS UNI C
PlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
U16 SF 4693 W-88 n n ABS UNI C
U23 SF 5026 W-200 n ABS UNI C
U31 SF 130D W-87 n n n ABS UNI C
U43 SF 0284 W-200 n ABS UNI C
U48 SF 0180 W-200 n ABS UNI C
U49 SF 1085 W-200 n n n ABS UNI C
U50 SF 5991 W-200 n ABS UNI C
U52 SF 862C W-200 n n n n n ABS UNI C
U52 SF 862C W-87 n n n ABS UNI C
U52 SF 862C W-224 n n ABS UNI C
U53 SF 221A W-200 n ABS UNI C
U56 SF 5971 W-200 n n n n ABS UNI C
U56 SF 5971 W-224 n n ABS UNI C
U61 SF 3311 W-200 n n n ABS UNI C
U61 SF 3311 W-87 n n n n ABS UNI C
U70 SF 447C W-200 n n ABS UNI C
U77 SF 5949 W-200 n ABS UNI C
U79 SF 0110 W-101 n n ABS UNI C
U79 SF 0110 W-102 n ABS UNI C
U79 SF 0110 W-86 n ABS UNI C
U79 SF 0110 W-200 n n n n n ABS UNI C
U79 SF 0110 GLATT n n n ABS UNI C
U79 SF 0110 W-105 n n n ABS UNI C
272
272
262
266
252
264
261
268
261
266
253
250
263
271
269
269
251
251
251
261
261
252
261
267
271
271
255
268
245
245
244
244
244
244
244
244
244
242
242
242
242
242
242
243
239
237
236
238
244
246
246
246
240
244
244
241
241
242
243
236
236
236
236
236
236
T –
Z
218 219unverbindliche Empfehlung | non-binding recommendation
Yildiz Entegre /Sunta / MDF
Döllken-Kanten passend zu | Döllken Edgebands to match
Yildiz Entegre /Sunta /MDFPlatteBoard
Döllken- DekornummerDöllken- Edgeband No.
Döllken- KantenprägungDöllken- Embossing
Abmessung (Breite x Stärke in mm) | Dimension (Width x Thickness in mm) RohstoffMaterial
ArtikelgruppeArticlegroup
Kl.Cl.
SeitePage
22 23 (Standard) 43 16-100
0,4 0,8 1 2 1,5 0,8 1 2
ABANOZ DC 185J W-87 n n ABS DC C
ABANOZ DC 185J W-88 n n n ABS DC C
ABANTCEVIZ DC 375Y W-200 n ABS DC C
AÇIKSARI SF 0707 W-200 n ABS UNI C
AÇIKSARI SF 0707 W-86 n n n ABS UNI C
ARIZONACEVI DC 535N W-200 n n ABS DC C
BEJ SF 6107 W-200 n ABS UNI C
BEYAZ SF 091E W-86 n n n ABS UNI C
CEVIZ DC 148J W-105 n n n n ABS DC C
DOGALKAYIN DC 954M W-105 n n ABS DC C
DOGALKAYIN DC 954M W-200 n ABS DC C
DOGALKAYIN DC 954M W-87 n n n n ABS DC C
ELMASKIRAZ DC 728L W-200 n n ABS DC C
KESTANE DC 998V W-105 n ABS DC C
KIRMIZI SF 5395 W-87 n n ABS UNI C
KIRMIZI SF 5395 W-200 n n n n n ABS UNI C
KOYUZEBRANO DC 410K W-105 n n n n ABS DC C
LINEACEVIZ DC 488Y W-105 n ABS DC C
LINEACEVIZ DC 488Y W-87 n ABS DC C
MAVI SF 482B P7166 n ABS UNI C
MORGANAKIRA DC 041U W-86 n n n n ABS DC C
NAPOLYONKIR DC 727L W-200 n n ABS DC C
OLIMPIAKIRA DC 727L W-200 n n ABS DC C
PLATIN DC 502L GLATT n n n ABS DC E
SIYAH SF 0110 W-101 n n ABS UNI C
SIYAH SF 0110 W-102 n ABS UNI C
SIYAH SF 0110 W-86 n ABS UNI C
SIYAH SF 0110 W-200 n ABS UNI C
SIYAH SF 0110 GLATT n n n ABS UNI C
SIYAH SF 0110 W-105 n ABS UNI C
SUYESILI SF 5026 W-200 n ABS UNI C
TIRECEVIZ DC 388U W-200 n ABS DC C
TIRECEVIZ DC 388U W-87 n ABS DC C
VIKTORYACEV DC 488Y W-105 n ABS DC C
VIKTORYACEV DC 488Y W-87 n ABS DC C
WENGE DC 185J W-87 n ABS DC C
WENGE DC 185J W-88 n ABS DC C
ZEBRANO DC 251V GLATT n ABS DC C
253
253
257
238
238
261
244
238
252
271
271
271
266
272
243
243
258
260
260
242
250
266
266
260
236
236
236
236
236
236
243
257
257
260
260
253
253
254
220 221
3D-Premium-Gloss 2- in -1 Endlich können Sie Ihren Kunden eine echte Alternative zu Echtglas anbieten. Die 3D-Premium-Gloss-2-in-1-Kanten eig-nen sich optimal, um ausdrucksstarke Akzente zu setzen und Möbeln eine einzigartige Wirkung zu verleihen. Damit bieten sie dieselben Vorteile wie Echtglas und sind darüber hinaus sogar noch deutlich leichter, preiswerter und widerstandfähiger als das Pendant.
3D EdgebandsAn elegant appearance enhances any piece of furniture.
With the unique 3D Edgebands from Döllken, you will easily meet the growing demand for quality and aesthetics from your clients. Döllken 3D edgeband visually enhances every piece of furniture and transforms then into unmistakable design statements.
3D-Kanten Die edle Optik wertet jedes Möbelstück auf.
Mit den einzigartigen 3D-Kanten von Döllken erfüllen Sie spielend den zunehmenden Anspruch an Qualität und Ästhetik Ihrer Kunden. Durch die optische Aufwertung wird jedes Möbelstück zum unverwechselbaren Gestal-tungselement.
3D-3 -in- 1-KanteDie 3D-3-in-1-Kante ist ein echter Hingucker. Sie eignet sich für den horizontalen sowie vertikalen Einsatz und macht in der Situation eine gute Figur. So finden sie ihren Einsatz an Fronten, Korpus und Türen und überall dort, wo Sie es wollen.
3D Premium Gloss 2 in 1Finally you can offer your customers a real alternative to glass. The 3D Premi-um Gloss 2-in-1 Edgebands are ideally suited to making big impressions and giving your furniture a unique finish. They offer the same benefits as real glass but are much lighter, cheaper and more durable. 3D 3 in 1 EdgebandThe 3D 3-in-1 Edgeband is a real eye-catcher. It can be used hori-zontally and vertically and looks amazing. They are used on fronts, carcasses and doors, in fact, wherever you want.
Ihre Vorteile im Überblick: Einzigartige Tiefenwirkung durch transparentes Material Geschütztes Dekorbild durch rückseitig aufgebrachtes Dekor Von matt bis hochglänzend polierbar Problemlose Entfernung leichter Oberflächenbeschädigungen In vielen Designs erhältlich Advantages for you at a glance: Unique sense of depth thanks to transparent material
Protected surface print thanks to printing on the reverse side
Can be polished from matt to achieve a high gloss finish
Easy to remove light surface scratches Available in many designs
3D-Kanten | 3D Edgebands
3D-K
ante
n | 3
D e
dg
eban
ds
222 223unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 1OHNE 3D
DC 007W 23 x 1OHNE 3D
DC 010Y
23 x 1OHNE 3D 2in1
DC 0R28 23 x 1OHNE 3D 2in1
DC 0R29
23 x 1OHNE 3D 2in1
DC 0R30 23 x 1OHNE 3D 2in1
DC 0R31
23 x 1OHNE 3D 2in1
DC 0R32 23 x 1OHNE 3D 2in1
DC 18R5
23 x 1OHNE 3D 2in1
DC 19R6 23 x 1OHNE 3D 2in1
DC 19R8
23 x 1OHNE 3D 2in1
DC 1R36 23 x 1OHNE 3D 2in1
DC 1R44
23 x 1OHNE 3D 2in1
DC 23R5 23 x 1OHNE 3D 2in1
DC 23R6
23 x 1OHNE 3D 2in1
DC 23R8 23 x 1OHNE 3D 2in1
DC 23R9
23 x 1OHNE 3D 2in1
DC 24R0 23 x 1OHNE 3D 2in1
DC 24R1
23 x 1OHNE 3D 2in1
DC 24R2 23 x 1OHNE 3D 2in1
DC 24R4
23 x 1OHNE 3D 2in1
DC 24R7 23 x 1OHNE 3D 2in1
DC 24R8
23 x 1OHNE 3D 2in1
DC 24R9 23 x 1OHNE 3D 2in1
DC 25R0
23 x 1OHNE 3D 2in1
DC 25R1 23 x 1OHNE 3D 2in1
DC 25R2
23 x 2OHNE 3D
DC 274R 23 x 1OHNE 3D 2in1
DC 31R3
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 1OHNE 3D 2in1
DC 31R4 23 x 1OHNE 3D 2in1
DC 31R5
23 x 1OHNE 3D 2in1
DC 32R0 23 x 1OHNE 3D 2in1
DC 32R1
23 x 1OHNE 3D 2in1
DC 35R0 23 x 1OHNE 3D 2in1
DC 35R1
23 x 1OHNE 3D 2in1
DC 35R2 23 x 1OHNE 3D 2in1
DC 35R3
23 x 1OHNE 3D 2in1
DC 35R4 23 x 1OHNE 3D 2in1
DC 37R6
23 x 1OHNE 3D 2in1
DC 38R4 23 x 1OHNE 3D 2in1
DC 38R7
23 x 1OHNE 3D 2in1
DC 38R8 23 x 1OHNE 3D 2in1
DC 42R6
23 x 1OHNE 3D 2in1
DC 48R4 23 x 1OHNE 3D 2in1
DC 48R6
23 x 1OHNE 3D 2in1
DC 50R7 23 x 1OHNE 3D 2in1
DC 54R6
23 x 1OHNE 3D 2in1
DC 59R2 23 x 1OHNE 3D 2in1
DC 59R3
23 x 1OHNE 3D 2in1
DC 59R4 23 x 1OHNE 3D 2in1
DC 59R5
23 x 1OHNE 3D 2in1
DC 61R7 23 x 1 23 x 2 33 x 2 43 x 2 54 x 2
OHNE 3D
DC 700R
23 x 2 43 x 2
OHNE 3D
DC 702R 23 x 1OHNE 3D 2in1
DC 71R0
23 x 1OHNE 3D 2in1
DC 71R1 23 x 1OHNE 3D 2in1
DC 71R2
3D-Kanten | 3D Edgebands
3D-K
ante
n | 3
D e
dg
eban
ds
224 225unverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 43 x 2
W-82 3D
DC 721R 23 x 1OHNE 3D 2in1
DC 74R5
23 x 1OHNE 3D 2in1
DC 74R6 23 x 1OHNE 3D 2in1
DC 78R0
23 x 1OHNE DuoGloss
DC 78R4 23 x 1OHNE DuoGloss
DC 78R5
23 x 1OHNE DuoGloss
DC 78R6 23 x 1OHNE 3D 2in1
DC 93R4
23 x 1OHNE 3D 2in1
DC 94R7 23 x 1OHNE 3D 2in1
DC 98R9
3D-Kanten | 3D Edgebands
3D-K
ante
n | 3
D e
dg
eban
ds
226 227
Hochglanz-Kanten | High-gloss Edgebands
Hochglanz-Kanten Spezieller UV-Lack sorgt für höchsten Glanzgrad.
Mit Hochglanz-Kanten von Döllken können Sie der weiterhin hohen Nachfrage nach einem eleganten Spiegelglanzeffekt in Möbelwelten hervorragend nachkommen. Zahlreiche Farben bieten genügend Raum für die Realisierung individueller Kundenwünsche. Durch den Abschlusslack entsteht ein einzigartiger Glanz, der jedem Möbelstück eine ganz besondere Optik verleiht.
High-gloss Edgebands Special UV coating provides superior gloss.
With High-gloss Edgebands from Döllken, you more than satisfy the high demand for an elegant mirror gloss effect in the world of furniture. A vast array of colours give you plenty of scope to meet individual customer requirements. The top coat creates a unique gloss, ensuring every piece of furniture has a premium finish.
Ihre Vorteile im Überblick: Mehr als 120 Farben und Dekore ab Lager erhältlich Höchster Glanzgrad durch speziellen UV-Lack Verschiedene Abmessungen verfügbar Advantages for you at a glance: More than 120 colours and surface prints available in stock
Superior gloss thanks to a special UV coating
Various dimensions available
Farben für jeden Geschmack Mehr als 120 hochglänzende Farben und Dekore sind kurzfristig ab Lager verfügbar. Von Standardfarben bis hin zu satten Trendfarben wie Marsala, Mango und Aquamarin ist alles dabei. Aber auch klassische Holzdekore und Exoten wie Makassar und Olivenbaum gehören zum Sortiment.
Colours for every tasteOver 120 high-gloss colours and surface prints are available from our stock at short notice. Ever-ything is available – from standard colours to rich trend finishes such as Marsala, Mango and Aquamarine. Not forgetting, of course, classic wood prints and exotic options such as Makassar and Olivewood.
Ho
chg
lkan
z-K
ante
n | H
igh-
glo
ss e
dg
eban
ds
228 229unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 1OHNE HG
DC 004W 23 x 1OHNE HG
DC 006W
23 x 1OHNE HG
DC 01U4 23 x 1OHNE HG
DC 01U5
23 x 1OHNE HG
DC 02K7 23 x 1OHNE HG
DC 034H
23 x 1OHNE HG
DC 05U3 23 x 1OHNE HG
DC 06U4
23 x 1OHNE HG
DC 06U5 23 x 1OHNE HG
DC 06U6
23 x 1OHNE HG
DC 06U7 23 x 1OHNE HG
DC 06U8
23 x 1OHNE HG
DC 06U9 23 x 1OHNE HG
DC 0R22
23 x 1OHNE HG
DC 0R23 23 x 1OHNE HG
DC 0R24
23 x 1OHNE HG
DC 0R25 23 x 1OHNE HG
DC 0R26
23 x 1OHNE HG
DC 0R27 23 x 1OHNE HG
DC 103W
23 x 1OHNE HG
DC 105W 23 x 0,8 23 x 1,3
OHNE HG
DC 154W
23 x 0,8 23 x 1,3
OHNE HG
DC 155W 23 x 1OHNE HG
DC 18J4
23 x 1OHNE HG
DC 18L5 23 x 1 45 x 1
OHNE ALU-Folie
DC 18P8
23 x 1OHNE HG
DC 19V9 23 x 1OHNE HG
DC 20P5
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 1OHNE HG
DC 20V0 23 x 1OHNE HG
DC 24Q7
23 x 1OHNE HG
DC 24U8 23 x 1OHNE HG
DC 24U9
23 x 1 23 x 2 33 x 2 45 x 2
OHNE HG
DC 263V 23 x 1OHNE HG
DC 274V
23 x 1OHNE HG
DC 27N3 23 x 1OHNE HG
DC 286H
23 x 1OHNE HG
DC 287H 23 x 1 23 x 2 33 x 2 45 x 2
OHNE HG
DC 319V
23 x 1OHNE HG
DC 31L2 23 x 1 23 x 2
OHNE HG
DC 31L5
23 x 1 23 x 2
OHNE HG
DC 325X 23 x 1OHNE HG
DC 354Y
23 x 1OHNE HG
DC 372X 23 x 1OHNE HG
DC 37M1
23 x 1 23 x 2
OHNE HG
DC 37V1 23 x 1OHNE HG
DC 407W
23 x 1OHNE HG
DC 40J7 23 x 1OHNE HG
DC 426H
23 x 1OHNE HG
DC 427H 23 x 1OHNE HG
DC 434H
23 x 1OHNE HG
DC 439W 23 x 1OHNE HG
DC 45W3
23 x 1OHNE HG
DC 46P8 23 x 1OHNE HG
DC 47K2
23 x 1OHNE HG
DC 47Q9 23 x 1OHNE HG
DC 481V
Hochglanz-Kanten | High-gloss Edgebands
Ho
chg
lkan
z-K
ante
n | H
igh-
glo
ss e
dg
eban
ds
230 231unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 1 23 x 2 33 x 2 45 x 2
OHNE HG
DC 498V 23 x 1 23 x 2
OHNE HG
DC 514W
23 x 1OHNE HG
DC 51K1 23 x 1OHNE HG
DC 529Y
23 x 1OHNE HG
DC 52W6 23 x 1OHNE HG
DC 52W7
23 x 1OHNE HG
DC 537H 23 x 1OHNE HG
DC 53W0
23 x 1OHNE HG
DC 54Q8 23 x 1OHNE HG
DC 552Y
23 x 1OHNE HG
DC 555Y 23 x 1OHNE HG
DC 557Y
23 x 1OHNE HG
DC 56J2 23 x 1OHNE HG
DC 570V
23 x 1OHNE HG
DC 62N6 23 x 1OHNE HG
DC 62V0
23 x 1OHNE HG
DC 62V1 23 x 1OHNE HG
DC 62V2
23 x 1OHNE HG
DC 62V3 23 x 1OHNE HG
DC 62V4
23 x 1OHNE HG
DC 63U1 23 x 1OHNE HG
DC 63U2
23 x 1OHNE HG
DC 63U3 23 x 1OHNE HG
DC 63U4
23 x 1OHNE HG
DC 63U5 23 x 1OHNE HG
DC 63U6
23 x 1OHNE HG
DC 63U7 23 x 1OHNE HG
DC 659X
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 1OHNE HG
DC 66V7 23 x 1OHNE HG
DC 67U0
23 x 1OHNE HG
DC 67V1 23 x 1OHNE HG
DC 67V2
23 x 1OHNE HG
DC 686W 23 x 1OHNE HG
DC 69L5
23 x 1OHNE HG
DC 702H 23 x 1OHNE HG
DC 719H
23 x 1OHNE HG
DC 71L5 23 x 1OHNE HG
DC 72N1
23 x 1OHNE HG
DC 731H 23 x 1OHNE HG
DC 783H
23 x 1OHNE HG
DC 80L4 23 x 1OHNE HG
DC 81L3
23 x 1OHNE HG
DC 82N8 23 x 1OHNE HG
DC 83Q9
23 x 1OHNE HG
DC 848U 23 x 1OHNE HG
DC 84Q0
23 x 1OHNE HG
DC 856H 23 x 1 23 x 2 33 x 2 45 x 2
OHNE HG
DC 858Y
23 x 1OHNE HG
DC 899V 23 x 1OHNE HG
DC 89Q2
23 x 1OHNE HG
DC 89Q9 23 x 1OHNE HG
DC 929H
23 x 1OHNE HG
DC 92Q9 23 x 1OHNE HG
DC 932P
23 x 1OHNE HG
DC 93Q0 23 x 1OHNE HG
DC 93Q1
Hochglanz-Kanten | High-gloss Edgebands
Ho
chg
lkan
z-K
ante
n | H
igh-
glo
ss e
dg
eban
ds
232 233unverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 1OHNE HG
DC 93Q2 23 x 1 23 x 1 23 x 1
OHNE HG
DC 944U
23 x 1OHNE HG
DC 949Y 23 x 1OHNE HG
DC 94M0
23 x 1OHNE HG
DC 950Y 23 x 1OHNE HG
DC 951Y
23 x 1OHNE HG
DC 952Y 23 x 1OHNE HG
DC 962Y
23 x 1OHNE HG
DC 963V 23 x 1OHNE HG
DC 984Y
Hochglanz-Kanten | High-gloss Edgebands
Ho
chg
lkan
z-K
ante
n | H
igh-
glo
ss e
dg
eban
ds
234 235
Uni-Kanten | Unicolour Edgebands
Uni-Kanten Die optimal abgestimmte Kante verschmilzt mit Ihrer Platte.
Bunte Farben machen Räume freundlicher. Lassen Sie sich hierbei nicht einschränken. Aus unserem KSP erhalten Sie zu allen Platten die im Hinblick auf Optik und Haptik perfekt abgestimmte Kante.
Unicolour Edgebands The perfectly matched edgebands blend seamlessly with your board.
Bright colours give your rooms a more welcoming feel. Don‘t hold back. Our KSP gives you edgebands that are perfectly matched to all boards when it comes to the look and feel of the print.
Immer passend Durch konsequenten Dekorver-
bund mit führenden Plattenherstellern in aller Welt stehen passende Kanten zu fast jeder Platte ab Lager zur Verfügung. Optimal abgestimmt in Dekor, Prägung und Glanzgrad.
Ihre Vorteile im Überblick: Natürliche Haptik dank Oberflächen- prägungen Perfekte Optik bei angefrästen Radien durch homogen durchgefärbtes Material
Splitter-, stoß- und kratzfest Unempfindlich gegen Reinigungsmittel, Dampf, Hitze und UV-Strahlen
Kaum sichtbare Klebefuge durch leichte Vorspannung
Sicheres Verkleben mit Haftvermittler
Advantages for you at a glance: Natural feel thanks to embossed surfaces Perfect appearance for milled radii thanks to uniform through-coloured material
Splinter, impact and scratch resistant Unaffected by cleaning agents, steam, heat and UV rays
An almost invisible glueline due to slight pre-tensioning
Secure bonding with primer
Always the right matchThanks to consistent surface print matching with leading board manufacturers around the world, we stock the right edgeband for almost every board. The best match you can find in terms of surface print, embossing and gloss. U
ni-K
ante
n | U
nico
lor
edg
eban
ds
236 237unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2OHNE UNI/L
DC 10V4 23 x 2OHNE UNI/L
DC 12V6
23 x 2OHNE UNI/L
DC 12V8 23 x 2OHNE UNI/L
DC 15V1
23 x 2OHNE UNI/L
DC 24W8 23 x 2LEDER UNI/L
DC 35W8
23 x 2LEDER UNI/L
DC 35W9 23 x 0,8OHNE UNI/L
DC 49U3
23 x 0,8OHNE UNI/L
DC 49U9 23 x 2LEDER UNI/L
DC 49W5
23 x 2LEDER UNI/L
DC 49W6 23 x 0,8OHNE UNI/L
DC 50U0
23 x 0,8OHNE UNI/L
DC 50U3 23 x 0,8OHNE UNI/L
DC 57U0
23 x 0,8OHNE UNI/L
DC 62L8 23 x 0,8OHNE UNI/L
DC 65U3
23 x 0,8OHNE UNI/L
DC 67V6 23 x 0,8OHNE UNI/L
DC 94M2
23 x 0,8 23 x 2
W-87 UNI
SF 010D 22 x 0,4 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
OHNE, W-86, W-101, W-102, W-105,
W-200 UNI
SF 0110
23 x 2W-87 UNI
SF 011E 23 x 2W-200 UNI
SF 015B
22 x 0,4 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-200, W-87 UNI
SF 0179 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 017A
23 x 2W-200 UNI
SF 0180 23 x 2W-200 UNI
SF 0184
23 x 2W-200 UNI
SF 0187 23 x 2W-200 UNI
SF 0188
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-200 UNI
SF 0189 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 0193
23 x 2W-200 UNI
SF 0197 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 01B3
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 01B7 23 x 0,8 23 x 2
W-86 UNI
SF 01B8
23 x 0,8 23 x 2
W-87 UNI
SF 01B9 23 x 2W-200 UNI
SF 0222
23 x 2W-200 UNI
SF 0284 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-86 UNI
SF 02B0
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 02B1 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 02B2
23 x 2W-200 UNI
SF 03B2 23 x 2W-87 UNI
SF 03B8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 03B9 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2 23 x 2
W-200 UNI
SF 0436
23 x 0,8 23 x 2
W-200 UNI
SF 0497 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 04B0
23 x 0,8 23 x 2
W-87 UNI
SF 04B5 23 x 0,8 23 x 2 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8
W-87 UNI
SF 04B6
23 x 2W-87 UNI
SF 04B7 23 x 0,8 23 x 2
W-87 UNI
SF 04B8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 0547 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-200 UNI
SF 0549
23 x 2W-87 UNI
SF 057D 23 x 0,8 23 x 2
W-200 UNI
SF 0595
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 0597 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 05B3
Uni-Kanten | Unicolour Edgebands
Uni
-Kan
ten
| Uni
colo
r ed
geb
and
s
238 239unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 05B4 23 x 0,8 23 x 2
W-87 UNI
SF 05B5
23 x 2W-200 UNI
SF 061C 23 x 2W-200 UNI
SF 0650
23 x 2W-200 UNI
SF 066D 23 x 0,8 23 x 2
W-200 UNI
SF 0693
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2 23 x 0,8
W-200, W-86 UNI
SF 0707 23 x 2W-200 UNI
SF 070B
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 0711 23 x 2W-200 UNI
SF 0717
23 x 2W-87 UNI
SF 071B 23 x 2W-200 UNI
SF 076C
23 x 2W-86 UNI
SF 07B5 23 x 0,8 23 x 2
W-86 UNI
SF 07B6
23 x 2W-200 UNI
SF 0805 23 x 2W-200 UNI
SF 086A
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 089A 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 0,8 100 x 2
W-102 UNI
SF 08A8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 091E 23 x 0,8 23 x 2
W-200 UNI
SF 100B
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 101A 23 x 2W-200, W-87 UNI
SF 1047
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 1067 23 x 0,8 23 x 2
W-200 UNI
SF 1072
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-87 UNI
SF 1081 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 1082
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 1083 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 1085
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200, W-87 UNI
SF 1086 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 UNI
SF 10B1
23 x 2W-87 UNI
SF 10C4 23 x 2W-87 UNI
SF 10C6
23 x 2W-86 UNI
SF 10C8 23 x 2W-86 UNI
SF 10C9
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 1138 23 x 2W-200 UNI
SF 1153
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 115A 23 x 2W-200 UNI
SF 1167
23 x 2W-200 UNI
SF 1196 23 x 2W-200 UNI
SF 119A
23 x 2W-86 UNI
SF 11C0 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 UNI
SF 11C2
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 UNI
SF 11C8 23 x 2W-86 UNI
SF 11C9
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 122E 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 1283
23 x 2W-86 UNI
SF 12C0 23 x 2W-87 UNI
SF 12C3
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 UNI
SF 12C5 23 x 2W-87 UNI
SF 12C6
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 UNI
SF 12C7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 130D
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 1330 23 x 2W-87 UNI
SF 13C1
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-200 UNI
SF 1402 23 x 0,8 23 x 2 28 x 2 33 x 2 54 x 2
100 x 2W-86 UNI
SF 14B3
Uni-Kanten | Unicolour Edgebands
Uni
-Kan
ten
| Uni
colo
r ed
geb
and
s
240 241unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 157A 23 x 2W-200 UNI
SF 158A
23 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-200, W-87 UNI
SF 169C 23 x 2W-200 UNI
SF 178A
22 x 0,4 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
OHNE, W-101, W-200, W-224, W-87
UNISF 1878 23 x 2W-200 UNI
SF 18A9
23 x 2W-87 UNI
SF 18C3 23 x 0,8W-87 UNI
SF 194A
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 201E 23 x 2W-200 UNI
SF 202C
23 x 2W-87 UNI
SF 202E 23 x 2W-200, W-87 UNI
SF 203E
23 x 2W-87 UNI
SF 206E 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 207C
28 x 2 33 x 2 45 x 2 54 x 2 100 x 2
W-200 UNI
SF 207E 23 x 2W-200 UNI
SF 2109
23 x 2W-200 UNI
SF 221A 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 2319
23 x 2W-200 UNI
SF 234A 23 x 2W-86 UNI
SF 23C9
23 x 2W-200 UNI
SF 25C2 23 x 2W-200 UNI
SF 25C3
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 261D 23 x 2W-200 UNI
SF 26C5
23 x 2W-200 UNI
SF 26C6 23 x 2W-200 UNI
SF 27C9
23 x 0,8 23 x 2
W-200 UNI
SF 281D 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 286E
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 288B 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-224, W-87 UNI
SF 303E
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 304D 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 309E
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 311D 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 315E
23 x 2W-200 UNI
SF 316E 22 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8 54 x 0,8
100 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200, W-87 UNI
SF 3311
23 x 2W-200 UNI
SF 335C 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 336C
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-200, W-224, W-86 UNI
SF 3401 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 345D
23 x 2W-200 UNI
SF 351B 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 36B4
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 386A 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 387A
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 388E 23 x 2W-200 UNI
SF 38B6
23 x 2W-87 UNI
SF 39A0 23 x 2W-87 UNI
SF 39A1
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200, W-87 UNI
SF 404C 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 404D
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 40A1 23 x 2W-86 UNI
SF 41A1
23 x 2W-87 UNI
SF 41B9 22 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-224, W-86 UNI
SF 423C
23 x 2W-200 UNI
SF 42A5 23 x 2W-87 UNI
SF 42B5
Uni-Kanten | Unicolour Edgebands
Uni
-Kan
ten
| Uni
colo
r ed
geb
and
s
242 243unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-87 UNI
SF 42B8 23 x 2W-86, W-200 UNI
SF 42B9
23 x 2W-86 UNI
SF 436E 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86, W-200 UNI
SF 437E
23 x 2W-200 UNI
SF 43B0 23 x 2W-87 UNI
SF 43B2
23 x 0,8 23 x 2
W-200 UNI
SF 447C 23 x 2W-200 UNI
SF 44B5
23 x 2W-200 UNI
SF 454C 22 x 0,4 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-86, W-102, W-200, W-224 UNI
SF 457E
23 x 0,8 23 x 2
W-200 UNI
SF 45B3 23 x 0,8 23 x 2
W-200 UNI
SF 45B9
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 4678 23 x 2W-200 UNI
SF 4685
23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8 54 x 0,8
100 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, W-86, W-87, W-88, W-101,
W-200 UNI
SF 4693 23 x 2W-200 UNI
SF 47B4
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87, W-200 UNI
SF 481B 23 x 2P7166 UNI
SF 482B
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 482E 23 x 2W-200 UNI
SF 483E
23 x 2W-200 UNI
SF 484E 23 x 0,8 23 x 2
W-200 UNI
SF 485E
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-101, W-200 UNI
SF 4861 23 x 2W-200 UNI
SF 48B5
23 x 2W-200 UNI
SF 494A 23 x 0,8 23 x 2
W-200 UNI
SF 494E
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-87, W-200 UNI
SF 4989 23 x 2W-200 UNI
SF 498E
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-87 UNI
SF 49A4 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 49B7
23 x 2W-200 UNI
SF 49B8 23 x 2W-87 UNI
SF 49B9
23 x 2W-200 UNI
SF 5026 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 511A
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, W-87, W-200 UNI
SF 5151 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 525E
23 x 2W-200 UNI
SF 533A 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 5373
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-87, W-200 UNI
SF 5395 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 539B
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 540E 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-200 UNI
SF 541B
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 556B 22 x 0,4 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 561D
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 56B1 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 578D
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 579D 22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87, W-224 UNI
SF 57B9
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 580D 23 x 2W-200 UNI
SF 581B
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 583D 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 5847
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, W-87, W-200 UNI
SF 5854 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 5908
23 x 2W-200 UNI
SF 5949 23 x 0,8 23 x 2
W-87 UNI
SF 596E
Uni-Kanten | Unicolour Edgebands
Uni
-Kan
ten
| Uni
colo
r ed
geb
and
s
244 245unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-200, W-224 UNI
SF 5971 23 x 2W-200 UNI
SF 5991
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-200, W-224 UNI
SF 5992 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 59B3
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 6008 23 x 0,8 23 x 2 23 x 0,8
W-200 UNI
SF 6082
23 x 2W-200 UNI
SF 6107 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 6108
23 x 0,8 23 x 2
W-200 UNI
SF 6119 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 612C
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-200 UNI
SF 6170 23 x 2W-200 UNI
SF 617A
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79, W-86, W-200 UNI
SF 617E 23 x 2W-200 UNI
SF 6192
23 x 2W-87 UNI
SF 61A7 22 x 0,4 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-86, W-200 UNI
SF 6208
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87, W-200 UNI
SF 6211 23 x 0,8 23 x 2
W-200 UNI
SF 6214
23 x 2W-200 UNI
SF 6217 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-101, W-200 UNI
SF 6241
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86, W-200 UNI
SF 6267 23 x 2W-200 UNI
SF 6287
23 x 2W-200 UNI
SF 62A1 23 x 2W-87 UNI
SF 62A5
22 x 0,4 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
OHNE, W-87, W-101, W-102, W-105,
W-200, W-224 UNI
SF 6346 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-200 UNI
SF 636D
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 638C 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-200 UNI
SF 6403
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 6414 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, W-200 UNI
SF 6444
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 6445 23 x 2W-200 UNI
SF 658B
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86, W-87 UNI
SF 659B 23 x 2W-87, W-200 UNI
SF 65A8
23 x 0,8 23 x 2
W-200 UNI
SF 666A 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 680A
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 70A2 22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-87, W-200 UNI
SF 735A
23 x 2W-200 UNI
SF 73B4 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 743B
23 x 0,8 23 x 2
W-87 UNI
SF 750A 23 x 2W-200 UNI
SF 753A
23 x 2W-200 UNI
SF 756A 23 x 2W-87 UNI
SF 76B3
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 77B9 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 0,8 100 x 2
W-200 UNI
SF 789C
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2OHNE, W-87, W-200 UNI
SF 79B2 23 x 2W-200 UNI
SF 79B6
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 UNI
SF 80B4 23 x 2W-224 UNI
SF 836B
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 836B 23 x 2W-87, W-200 UNI
SF 84A6
23 x 2W-200 UNI
SF 84A8 23 x 2W-87 UNI
SF 85A2
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 85A4 23 x 2W-86 UNI
SF 85B9
Uni-Kanten | Unicolour Edgebands
Uni
-Kan
ten
| Uni
colo
r ed
geb
and
s
246 247unverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-87, W-200, W-224 UNI
SF 862C 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 864A
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 UNI
SF 86B4 23 x 2W-87 UNI
SF 87A4
23 x 2W-200 UNI
SF 87B7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 88A3
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 UNI
SF 88A4 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 UNI
SF 88A5
23 x 2W-87 UNI
SF 88B0 23 x 2W-87 UNI
SF 88B1
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 897D 23 x 2W-200 UNI
SF 903B
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 UNI
SF 922B 23 x 2W-200 UNI
SF 936D
23 x 2W-87 UNI
SF 94A7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-101 UNI
SF 960D
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 UNI
SF 960E 23 x 2W-86 UNI
SF 966C
23 x 2W-200 UNI
SF 979C 23 x 2W-87 UNI
SF 995E
23 x 2W-87 UNI
SF 99A3 23 x 2W-86, W-87 UNI
SF 99A7
23 x 0,8 23 x 2
W-86 UNI
SF 99A8 23 x 0,8 23 x 2
W-86 UNI
SF 99A9
Uni-Kanten | Unicolour Edgebands
Uni
-Kan
ten
| Uni
colo
r ed
geb
and
s
248 249
Dekor-Kanten | Surface print Edgebands
Dekor-Kanten Der Gestaltung sind keine Grenzen mehr gesetzt.
Dekor-Kanten eröffnen Ihnen mit ihrer besonders natürlich wirkenden Oberfläche nahezu unbegrenzte
Gestaltungsmöglichkeiten. Ob Holz-, Multiplex-, Stein-, Metallic- oder Fantasie-Dekore, ob klassisch oder progressiv, dezent oder provozierend: Lassen Sie sich inspirieren zu neuen Ideen. Übrigens: Durch kon-
sequenten Dekorverbund mit führenden Plattenherstellern sind passende Kanten zu fast jeder Platte ab Lager erhältlich.
Surface print Edgebands Design knows no bounds.
With their very natural looking finish, surface print edges create almost unlimited design options.
Whether wood, multiplex, stone, metallic or fantasy surface prints, or classical or progressive, discreet or provocative: be inspired to create new ideas. What’s more, thanks to consistent surface
print matching with leading board manufacturers, we stock the right edgeband for almost every board.
Ihre Vorteile im Überblick: Einzigartige Dekorvielfalt durch perfekte Drucktechnik Optimaler Dekorschutz durch UV-gehärteten Acryl-Lack Riesiger Dekorverbund Advantages for you at a glance: Unique surface print variety thanks to perfect printing technology
Optimum surface print protection using UV-hardened acrylic paint
Extensive surface print matching
Perfekte OptikDurch die hochpräzise Drucktechnik von Döllken lassen sich unzählige Dekorbilder auf die Kante bringen. Moderne Kanten-technologie sorgt zudem bei allen Holzdekoren für eine beson-ders natürlich wirkende Oberfläche.
Perfect appearanceWith high-precision printing technology from Döllken, count-less surface prints can transferred directly to the edgeband. Modern edgeband technology also means that all wood finis-hes are enhanced by a particularly natural-looking surface.
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
250 251unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-86 DC
DC 00Q1 23 x 2W-200 DC
DC 012J
23 x 2 43 x 2
OHNE DC
DC 015R 22 x 0,4W-200 DC
DC 019Y
23 x 2W-87 DC
DC 01U0 23 x 2W-87 DC
DC 01U1
23 x 2W-111 DC
DC 01U2 23 x 2W-200 DC
DC 01U3
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 021K 23 x 2W-86 DC
DC 02L3
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-200, W-86 DC
DC 030J 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 030J
33 x 2 23 x 2
OHNE, W-88 DC
DC 037J 23 x 2W-200 DC
DC 03J2
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-105, W-87 DC
DC 03J3 23 x 0,8 23 x 2
W-86 DC
DC 03L0
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 03P4 23 x 2W-88 DC
DC 03P6
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 040V 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-86 DC
DC 041U
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 DC
DC 042U 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 04K8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 04L4 28 x 2 33 x 2 45 x 2 54 x 2 100 x 2
W-86 DC
DC 04L5
100 x 0,8W-232 DC
DC 05U2 23 x 2W-224 DC
DC 05V8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105 DC
DC 060J 23 x 2OHNE DC
DC 061J
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-105 DC
DC 062J 23 x 2W-200 DC
DC 064J
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 064K 22 x 0,4 23 x 2
W-200 DC
DC 066L
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 067U 23 x 2W-87 DC
DC 069U
23 x 2W-88 DC
DC 06M7 23 x 2W-88 DC
DC 06N7
23 x 0,8 23 x 2
W-111 DC
DC 07L5 23 x 0,8OHNE DC
DC 07V7
23 x 2W-87 DC
DC 081H 23 x 2P7166 DC
DC 081J
23 x 2W-86 DC
DC 082P 23 x 2P7166 DC
DC 083V
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 089W 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105, W-86 DC
DC 099V
23 x 2W-86 DC
DC 09J7 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-111 DC
DC 09L4
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-79 DC
DC 09V1 23 x 2W-79 DC
DC 09V5
23 x 2W-79 DC
DC 09V9 23 x 2W-86 DC
DC 102V
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86, W-88 DC
DC 103V 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 108J
23 x 0,8 23 x 2
W-105 DC
DC 10K0 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 DC
DC 10L1
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 10V0 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-105 DC
DC 112W
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
252 253unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2OHNE DC
DC 114W 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 115W
22 x 0,4 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
P7166, W-200 DC
DC 116V 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-111 DC
DC 11P7
23 x 0,8OHNE DC
DC 11Q3 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79, W-86, W-86 DC
DC 12L0
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 12L8 23 x 0,8 23 x 2
W-200 DC
DC 12N0
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 DC
DC 135M 22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
P7145, W-200 DC
DC 138V
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 DC
DC 13L8 23 x 0,8 23 x 2
W-111 DC
DC 13P3
23 x 2W-86 DC
DC 13P6 23 x 2W-111 DC
DC 13W0
23 x 1 23 x 2 33 x 2 43 x 2
OHNE DC
DC 142R 23 x 2 43 x 2
OHNE DC
DC 144R
23 x 2 43 x 2
OHNE DC
DC 145R 23 x 2W-88 DC
DC 146X
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-105 DC
DC 148J 23 x 2W-200 DC
DC 149J
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
SL111, W-111 DC
DC 14L3 23 x 2W-111 DC
DC 14M0
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
P7145, W-86 DC
DC 154V 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 DC
DC 156W
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 15J4 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 15N2
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 162J 23 x 2W-200 DC
DC 165J
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
P7166 DC
DC 167K 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8 54 x 0,8
100 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105, W-86, W-87 DC
DC 16J7
23 x 2W-86 DC
DC 16J9 23 x 0,8 23 x 2
W-111 DC
DC 16P1
23 x 2OHNE DC
DC 16P9 23 x 2P7145 DC
DC 174H
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105 DC
DC 179K 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86, W-87, W-88 DC
DC 17L9
23 x 2W-105 DC
DC 17U9 23 x 1 23 x 2 33 x 2 43 x 2
OHNE DC
DC 182R
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87, W-88 DC
DC 185J 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 185L
23 x 2W-86 DC
DC 188U 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-102 DC
DC 18J9
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-87 DC
DC 18L6 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
OHNE DC
DC 18L8
23 x 2W-111 DC
DC 18U0 23 x 2W-111 DC
DC 18U1
23 x 2W-111 DC
DC 18U2 23 x 2W-111 DC
DC 18U3
23 x 2W-111 DC
DC 18U4 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 18U5
23 x 2W-200 DC
DC 191Q 22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-200, W-87 DC
DC 191W
23 x 0,8 23 x 2 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8
W-88 DC
DC 195U 23 x 2W-105 DC
DC 19L6
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-224 DC
DC 19L8 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200, W-102 DC
DC 200X
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
254 255unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-102 DC
DC 203X 22 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-105, W-224 DC
DC 204J
23 x 2W-87 DC
DC 20U6 23 x 2W-111 DC
DC 20U7
23 x 2W-111 DC
DC 20U8 23 x 2W-111 DC
DC 20U9
23 x 2 43 x 2
OHNE DC
DC 210R 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 216J
23 x 2W-200 DC
DC 21J6 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 21M6
23 x 2W-79 DC
DC 21W4 23 x 2W-87 DC
DC 229J
23 x 2OHNE DC
DC 22N2 23 x 2W-200 DC
DC 242U
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200, W-87 DC
DC 246K 23 x 2W-88 DC
DC 24W9
23 x 0,8 23 x 2 23 x 0,8
OHNE DC
DC 251V 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105, W-88 DC
DC 253U
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 25M0 23 x 2W-111 DC
DC 25W0
23 x 2W-86 DC
DC 25W1 23 x 2W-88 DC
DC 25W2
23 x 2W-224 DC
DC 25W3 23 x 2W-224 DC
DC 25W4
23 x 2P7145 DC
DC 25W5 23 x 2P7145 DC
DC 25W6
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2P7145 DC
DC 25W7 23 x 2W-224 DC
DC 25W8
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 276W 23 x 2W-111 DC
DC 27K6
23 x 2W-111 DC
DC 27K7 23 x 2OHNE DC
DC 281P
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2OHNE DC
DC 283P 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, W-87 DC
DC 283X
23 x 0,8 23 x 2
W-200 DC
DC 28N1 23 x 2W-88 DC
DC 28V0
23 x 2 43 x 2
WAVE DC
DC 297R 23 x 2W-105 DC
DC 298J
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 DC
DC 29P1 23 x 2 28 x 2 33 x 2 45 x 2 100 x 2
W-224 DC
DC 29V5
23 x 2W-224 DC
DC 29V7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-224 DC
DC 29V8
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-224, W-79 DC
DC 29V9 23 x 2W-111 DC
DC 29W6
23 x 2W-111 DC
DC 29W7 23 x 2W-111 DC
DC 29W8
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 308Y 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-80 DC
DC 30P0
23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8 54 x 0,8
100 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 30P1 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 30P2
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 30P3 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 30P4
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79 DC
DC 30V0 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79 DC
DC 30V1
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79 DC
DC 30V2 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-88 DC
DC 30V3
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
256 257unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-88 DC
DC 30V4 23 x 1 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-235 DC
DC 30V5
23 x 1 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-235 DC
DC 30V6 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79 DC
DC 30V7
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79 DC
DC 30V8 23 x 2W-200 DC
DC 315K
22 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200, W-87 DC
DC 316N 22 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-105, W-86 DC
DC 31J4
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-111 DC
DC 31L6 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-86 DC
DC 32L2
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-105, W-86 DC
DC 337W 23 x 2W-200 DC
DC 33J0
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-105 DC
DC 33J8 23 x 2W-86 DC
DC 33N7
23 x 2W-200 DC
DC 33W5 23 x 2W-200 DC
DC 33W6
23 x 2W-87 DC
DC 33W7 23 x 2W-87 DC
DC 33W8
23 x 2W-86 DC
DC 33W9 23 x 0,8 23 x 2
W-88 DC
DC 346V
23 x 2W-86 DC
DC 34W0 23 x 2W-86 DC
DC 34W1
23 x 2W-87 DC
DC 34W2 23 x 2W-86 DC
DC 34W3
23 x 2W-79 DC
DC 34W4 23 x 2W-102 DC
DC 34W5
23 x 2W-102 DC
DC 34W6 22 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200, W-88 DC
DC 352Q
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2OHNE DC
DC 355Q 23 x 2OHNE DC
DC 356Q
23 x 2OHNE DC
DC 357Q 23 x 2W-87, W-88 DC
DC 359J
23 x 0,8 23 x 2
W-111 DC
DC 35L0 23 x 2W-111 DC
DC 35W3
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, W-106 DC
DC 361H 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86, W-87 DC
DC 363V
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 364P 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 36K7
23 x 2W-86 DC
DC 36L0 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-87 DC
DC 36L4
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 36M1 23 x 2W-111 DC
DC 36V2
23 x 2W-224 DC
DC 36V9 23 x 2LEDER DC
DC 36W0
23 x 2W-88 DC
DC 36W6 23 x 2W-200 DC
DC 375Y
23 x 2W-88 DC
DC 37V3 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 37V8
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-105 DC
DC 381N 23 x 2W-200 DC
DC 382L
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-200, W-86 DC
DC 385L 22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2 23 x 0,8
W-200, W-87 DC
DC 388U
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
100 x 2W-86 DC
DC 38P2 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 DC
DC 38P3
23 x 2W-88 DC
DC 38V9 23 x 2W-200 DC
DC 396H
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
258 259unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-86 DC
DC 396N 23 x 0,8 23 x 2
W-105 DC
DC 397J
23 x 2W-105, W-87 DC
DC 399W 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 39L8
23 x 2P7145 DC
DC 39W8 23 x 2P7145 DC
DC 39W9
23 x 2W-105 DC
DC 407L 23 x 0,8 23 x 2
W-224 DC
DC 40V7
23 x 0,8 23 x 2
W-86 DC
DC 40V8 23 x 2P7145 DC
DC 40W0
23 x 2P7145 DC
DC 40W1 23 x 2W-88 DC
DC 40W3
23 x 2P7145 DC
DC 40W4 22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-105 DC
DC 410K
23 x 2W-106, W-200 DC
DC 411X 100 x 0,8W-232 DC
DC 41P0
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 41P1 23 x 2W-79 DC
DC 41U2
23 x 2W-111 DC
DC 41V0 23 x 2W-88 DC
DC 422H
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 42N5 23 x 2W-87 DC
DC 42N6
23 x 2OHNE DC
DC 435K 23 x 0,8 23 x 2 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8
OHNE DC
DC 439M
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 43P6 23 x 2P7145 DC
DC 43W6
23 x 2P7145 DC
DC 43W7 23 x 2W-87 DC
DC 440U
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 447X 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-224 DC
DC 44U1
23 x 2W-88 DC
DC 44V4 23 x 2W-88 DC
DC 44V6
23 x 2W-88 DC
DC 44V8 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 450V
23 x 2W-88 DC
DC 453K 22 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200, W-88 DC
DC 459H
22 x 0,4W-105 DC
DC 459X 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 45L3
23 x 2W-111 DC
DC 45M8 23 x 2W-86 DC
DC 45U8
23 x 2W-86 DC
DC 45U9 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 45V1
23 x 2W-224 DC
DC 45V2 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-79 DC
DC 45V3
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 45V4 23 x 2W-111 DC
DC 45W4
23 x 2W-111 DC
DC 45W5 23 x 2W-111 DC
DC 45W6
23 x 2W-88 DC
DC 45W7 23 x 2W-86 DC
DC 45W8
23 x 2W-200 DC
DC 45W9 23 x 2W-87 DC
DC 465W
23 x 2W-105 DC
DC 468H 23 x 2W-86 DC
DC 46U0
23 x 2W-86 DC
DC 46U1 23 x 2W-86 DC
DC 46U2
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
260 261unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-86 DC
DC 46U3 23 x 2W-86 DC
DC 46W0
23 x 2W-111 DC
DC 46W1 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-102 DC
DC 472X
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 473X 22 x 0,4W-105 DC
DC 47L0
23 x 2W-105, W-87 DC
DC 488Y 23 x 0,8 23 x 2
W-111 DC
DC 48Q3
23 x 2W-105 DC
DC 494J 23 x 2OHNE, W-101 DC
DC 498L
23 x 2W-87 DC
DC 49L1 23 x 2W-86 DC
DC 49L9
23 x 2P7145 DC
DC 49W4 23 x 2P7145 DC
DC 49W7
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE DC
DC 502L 23 x 2W-105 DC
DC 506W
23 x 2W-79 DC
DC 50M7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 DC
DC 50P5
23 x 2W-200, W-79 DC
DC 50Q7 23 x 2W-111 DC
DC 50W8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 516U 22 x 0,4 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200, W-87 DC
DC 517J
23 x 2W-86 DC
DC 51N6 23 x 2W-87 DC
DC 525V
23 x 2W-88 DC
DC 52K1 23 x 2W-111 DC
DC 52L1
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 52Q4 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-88 DC
DC 52U9
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-224 DC
DC 52W8 23 x 2W-224 DC
DC 52W9
23 x 0,8 23 x 2
W-200 DC
DC 535N 28 x 2 33 x 2 45 x 2 54 x 2 100 x 2
W-86 DC
DC 535U
23 x 0,8 23 x 2
W-200 DC
DC 538H 23 x 0,8 23 x 2
OHNE DC
DC 538J
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 53J6 23 x 2W-200 DC
DC 53J7
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-88 DC
DC 53U2 23 x 2W-86 DC
DC 53U6
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 54M0 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-110 DC
DC 551P
23 x 2W-105 DC
DC 552L 23 x 2W-200 DC
DC 554K
23 x 2W-111 DC
DC 556H 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 55L4
23 x 2W-102 DC
DC 55W1 23 x 0,8 23 x 2
W-105 DC
DC 560J
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-86 DC
DC 563X 22 x 0,4 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200, W-87 DC
DC 569P
23 x 0,8OHNE DC
DC 56U6 23 x 2W-105 DC
DC 570U
23 x 2W-105 DC
DC 578Q 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 57N9
23 x 0,8 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 580M 23 x 2W-87 DC
DC 582X
23 x 2W-200 DC
DC 584J 23 x 2P7170 DC
DC 58L2
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
262 263unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2W-87 DC
DC 58P5 23 x 0,8OHNE DC
DC 58U2
22 x 0,4 23 x 2
W-111, W-200 DC
DC 595N 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 596J
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-111 DC
DC 597H 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 59N8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 DC
DC 608H 23 x 0,8 23 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-224 DC
DC 608Y
23 x 2OHNE DC
DC 60N4 23 x 2P7166 DC
DC 60Q0
23 x 2W-111 DC
DC 61P1 22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-105, W-111, W-87 DC
DC 629N
100 x 0,8W-232 DC
DC 62J6 23 x 0,8OHNE DC
DC 62L2
23 x 2W-87 DC
DC 630K 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
P7145, P7166 DC
DC 646N
23 x 2W-86 DC
DC 64K8 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 64P4
23 x 2W-104 DC
DC 6522 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-88 DC
DC 6548
23 x 2OHNE DC
DC 654L 23 x 2OHNE DC
DC 655L
23 x 2W-200 DC
DC 6569 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-86 DC
DC 656W
23 x 2W-88 DC
DC 656Y 23 x 0,8 23 x 2
W-111 DC
DC 65K2
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-111 DC
DC 65K3 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 65K4
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2
W-79 DC
DC 65M1 23 x 2W-101 DC
DC 65M2
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 65M2 23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-111 DC
DC 65P4
22 x 0,4 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105, W-86 DC
DC 65P5 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 65P6
23 x 0,8 23 x 2
W-86 DC
DC 65P7 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 65P8
23 x 0,8 23 x 2
W-111 DC
DC 65V5 23 x 0,8 23 x 2
W-111 DC
DC 65V6
23 x 0,8 23 x 2
W-224 DC
DC 65V7 23 x 0,8 23 x 2
W-224 DC
DC 65V8
23 x 0,8 23 x 2
W-224 DC
DC 65V9 23 x 2W-105 DC
DC 661L
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, P7145, W-86 DC
DC 6629 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 6635
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 6640 28 x 2 33 x 2 45 x 2 54 x 2 100 x 2
W-87 DC
DC 665N
23 x 2W-86 DC
DC 66L7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 66M8
23 x 2W-249 DC
DC 66P3 23 x 0,8 23 x 2
W-224 DC
DC 66V0
23 x 0,8 23 x 2
W-224 DC
DC 66V3 23 x 0,8 23 x 2
W-224 DC
DC 66V4
23 x 0,8 23 x 2
W-86 DC
DC 66V5 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-105 DC
DC 6708
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 6762 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 677N
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
264 265unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 6794 23 x 0,8 23 x 2
P7145, W-200 DC
DC 679K
23 x 2W-86 DC
DC 67M4 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 67M7
23 x 2W-87 DC
DC 67N0 23 x 2W-111 DC
DC 67N1
23 x 2W-87 DC
DC 67N2 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 DC
DC 67N4
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 0,8 100 x 2
W-86, W-87 DC
DC 67N7 23 x 2W-86 DC
DC 67Q6
23 x 2W-111 DC
DC 67Q7 23 x 2W-111 DC
DC 67Q8
23 x 2W-111 DC
DC 67Q9 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 6835
23 x 0,8 23 x 2
W-200 DC
DC 68P7 23 x 0,8 23 x 2 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8
W-86 DC
DC 68P8
23 x 2W-86 DC
DC 68P9 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 68Q6
23 x 2W-200 DC
DC 692Q 23 x 2W-200 DC
DC 694L
23 x 2W-200 DC
DC 6967 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105, W-86, W-87 DC
DC 6968
23 x 2W-200 DC
DC 6996 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 69L0
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 69M5 23 x 2W-86, W-87 DC
DC 69M6
23 x 0,8 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 69M8 23 x 2W-87 DC
DC 69M9
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 69P3 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 69P4
23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8 54 x 0,8
100 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 69P5 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 69P6
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 69P7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 69P8
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 69P9 22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87, W-88 DC
DC 7008
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 DC
DC 702M 22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-200, W-86, W-87, W-88 DC
DC 703Q
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-79 DC
DC 706H 23 x 0,8 23 x 2
W-79 DC
DC 707H
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-200, W-87 DC
DC 708N 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 7099
23 x 2W-87 DC
DC 70M0 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 70M1
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 70P0 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 70P1
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 70Q2 23 x 2W-88 DC
DC 70Q3
23 x 2W-88 DC
DC 70Q4 23 x 2W-86 DC
DC 70Q5
23 x 2W-86 DC
DC 70Q6 23 x 2W-111 DC
DC 70Q7
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 70Q8 23 x 2W-86 DC
DC 70Q9
23 x 2W-88 DC
DC 7191 23 x 2W-79 DC
DC 71M1
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
266 267unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-80 DC
DC 71P3 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 DC
DC 71P4
23 x 0,8OHNE DC
DC 71V1 23 x 0,8OHNE DC
DC 71V2
23 x 0,8OHNE DC
DC 71V3 23 x 2W-200 DC
DC 721H
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-104 DC
DC 7239 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 727L
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 728L 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 72M1
23 x 2W-86 DC
DC 72M2 23 x 2W-86 DC
DC 72M3
23 x 2W-200 DC
DC 72M4 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 72M5
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 72M6 23 x 2W-86 DC
DC 72M7
23 x 2W-111 DC
DC 72M8 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 735V
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 739K 23 x 0,8 23 x 2
W-111 DC
DC 73Q7
23 x 0,8 23 x 2
W-111 DC
DC 73Q8 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE DC
DC 7422
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-249, W-87 DC
DC 74N3 23 x 2W-111 DC
DC 74P5
23 x 0,8 23 x 2
OHNE DC
DC 74Q1 23 x 0,8 23 x 2
W-111 DC
DC 74Q2
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 75P0 23 x 0,8 23 x 2
W-111 DC
DC 75P1
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 75P2 23 x 2W-224 DC
DC 75U1
23 x 2W-88 DC
DC 75U2 23 x 2W-88 DC
DC 75U6
23 x 2W-86 DC
DC 75U8 23 x 2W-111 DC
DC 75U9
23 x 2W-86 DC
DC 76M0 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86, W-88 DC
DC 76M1
23 x 0,8 23 x 2
W-87 DC
DC 76P2 28 x 2 33 x 2 45 x 2 54 x 2 100 x 2
OHNE DC
DC 779H
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-88 DC
DC 77U1 22 x 0,4 23 x 2
W-104, W-88 DC
DC 784J
23 x 2W-105 DC
DC 7855 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-104 DC
DC 785J
22 x 0,4W-200 DC
DC 7871 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 7876
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 DC
DC 78P4 22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-105, W-86 DC
DC 791V
22 x 0,4W-200 DC
DC 793H 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105 DC
DC 7977
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200, W-86 DC
DC 797K 23 x 2W-111 DC
DC 79M8
23 x 2OHNE DC
DC 79N6 23 x 2 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-105, W-200 DC
DC 800Q
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200, W-88 DC
DC 8021 23 x 2W-88 DC
DC 80Q8
23 x 0,8OHNE DC
DC 80U1 23 x 2W-88 DC
DC 8150
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
268 269unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-88 DC
DC 8152 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 8166
23 x 2W-200, W-88 DC
DC 8172 23 x 2W-88 DC
DC 8176
23 x 0,8 23 x 2
W-88 DC
DC 817U 22 x 0,4 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-104, W-88 DC
DC 8196
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 819L 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86 DC
DC 822W
23 x 2W-88 DC
DC 82P5 23 x 2W-111 DC
DC 82Q2
23 x 2W-111 DC
DC 82Q3 23 x 0,8 23 x 2
W-111 DC
DC 82Q4
23 x 2W-87 DC
DC 82Q5 23 x 2W-87 DC
DC 82Q7
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 83N9 23 x 2W-86 DC
DC 83Q8
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 8428 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 DC
DC 8437
28 x 2 33 x 2 45 x 2 54 x 2 100 x 2
W-200 DC
DC 8446 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 DC
DC 845Q
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-249 DC
DC 84U4 22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 0,8
33 x 2 45 x 2 54 x 2 100 x 0,8 100 x 2
W-200 DC
DC 8525
23 x 2W-200 DC
DC 852Y 23 x 2OHNE DC
DC 857J
23 x 2OHNE, W-200 DC
DC 8580 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 DC
DC 861U
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-88 DC
DC 8631 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-86, W-88 DC
DC 8642
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
22 x 0,4 23 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 54 x 2 100 x 2
W-200, W-87 DC
DC 8647 23 x 2W-200 DC
DC 8654
23 x 0,8 23 x 2
W-86 DC
DC 865V 22 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-106, W-200 DC
DC 8677
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 86J4 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 86L0
23 x 0,8 23 x 2
W-102 DC
DC 86N1 23 x 0,8 23 x 2
W-111 DC
DC 86P2
23 x 2W-86 DC
DC 86Q1 23 x 2W-88 DC
DC 86U4
22 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105, W-87 DC
DC 8750 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 878H
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-105 DC
DC 879H 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-200 DC
DC 879L
23 x 2W-87 DC
DC 87N4 23 x 2W-111 DC
DC 87N5
23 x 0,8 23 x 2
W-102 DC
DC 87N6 23 x 0,8 23 x 2
W-86 DC
DC 87N8
23 x 0,8 23 x 2
P7145 DC
DC 87N9 23 x 2W-87 DC
DC 87P9
23 x 2W-224 DC
DC 87V6 23 x 2OHNE DC
DC 887Y
23 x 0,8 23 x 2 28 x 0,8 28 x 2 33 x 0,8
33 x 2 45 x 0,8 45 x 2 54 x 0,8 54 x 2
100 x 0,8 100 x 2
W-111 DC
DC 88J7 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
DC 88K3
23 x 2W-111 DC
DC 88L2 23 x 0,8 23 x 2
P7166 DC
DC 88N2
23 x 2W-111 DC
DC 88N4 23 x 0,8 23 x 2
W-80 DC
DC 88P0
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
270 271unverbindliche Farbabbildungen | non-binding colour illustrationsunverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-87 DC
DC 88P1 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-86 DC
DC 88P2
23 x 2W-87, W-88 DC
DC 8978 23 x 2W-87 DC
DC 89L8
23 x 2W-102 DC
DC 89N0 23 x 2P7166 DC
DC 89N1
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-105 DC
DC 904X 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-200 DC
DC 905X
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-79 DC
DC 90M5 23 x 0,8 23 x 2
OHNE DC
DC 90N4
100 x 0,8W-232 DC
DC 90P6 23 x 2W-79 DC
DC 90Q0
23 x 2W-79 DC
DC 90Q1 23 x 2W-111 DC
DC 90Q2
23 x 2W-88 DC
DC 90Q3 23 x 0,8OHNE DC
DC 90U6
23 x 2W-88 DC
DC 90V3 23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 DC
DC 913L
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
OHNE, W-86 DC
DC 913P 23 x 2W-111 DC
DC 91N1
23 x 2P7145 DC
DC 91N4 23 x 2P7145 DC
DC 91N6
23 x 2W-79 DC
DC 91V6 23 x 2W-79 DC
DC 91V7
23 x 2W-79 DC
DC 91V8 23 x 2W-88 DC
DC 91V9
23 x 2W-200 DC
DC 926H 23 x 2W-200 DC
DC 926J
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 0,8 23 x 2
W-200 DC
DC 927H 23 x 2W-200, W-79 DC
DC 92M4
23 x 2W-87 DC
DC 92P1 23 x 2W-111 DC
DC 92P8
23 x 2W-88 DC
DC 92V0 23 x 2W-88 DC
DC 92V1
23 x 2W-88 DC
DC 92V2 23 x 2W-111 DC
DC 92V3
23 x 2W-88 DC
DC 92V4 23 x 2W-88 DC
DC 92V5
23 x 2W-224 DC
DC 92V8 23 x 2W-224 DC
DC 92V9
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 93K4 23 x 2W-200 DC
DC 945L
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-87 DC
DC 94L3 23 x 2OHNE DC
DC 950V
22 x 0,4 23 x 0,8 23 x 2 28 x 0,8 28 x 2
33 x 0,8 33 x 2 45 x 0,8 45 x 2 54 x 0,8
54 x 2 100 x 0,8 100 x 2
W-200 DC
DC 952P 22 x 0,4 23 x 0,8 28 x 0,8 33 x 0,8 45 x 0,8
54 x 0,8 100 x 0,8 23 x 2 28 x 2 33 x 2
45 x 2 45 x 2 54 x 2 100 x 2
W-105, W-200, W-87 DC
DC 954M
28 x 2 33 x 2 45 x 2 54 x 2 100 x 2
W-200 DC
DC 957N 23 x 2W-88 DC
DC 958N
23 x 0,8 23 x 2 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
OHNE, P7145 DC
DC 958X 23 x 2W-87 DC
DC 959N
23 x 2W-88 DC
DC 963N 23 x 2OHNE DC
DC 965X
23 x 2W-88 DC
DC 96N8 23 x 2W-79 DC
DC 97L5
23 x 2W-111 DC
DC 98J3 23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 98J4
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
272 273unverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-111 DC
DC 98N0 23 x 2W-79 DC
DC 98Q2
23 x 2W-88 DC
DC 995U 23 x 2W-105 DC
DC 998V
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 2W-105, W-87 DC
DC 999J 23 x 2W-111 DC
DC 99N0
23 x 2 28 x 2 33 x 2 45 x 2 54 x 2
100 x 0,8 100 x 2
23 x 2 23 x 0,8 28 x 2 33 x 2 45 x 2
54 x 2 100 x 2
W-111 DC
W-102DC
DC 99P0 DC 202X
Dekor-Kanten | Surface print Edgebands
Dek
or-
Kan
ten
| Sur
face
pri
nt e
dg
eban
ds
Ihr direkter Weg zur Arbeitsplatten-Lager-kollektion: www.Kanten-Finder.de
Your direct route to the Worktop Edgeband Stock Collection: www.KSP-online.com
274 275
Digital-Kanten | Digital Edgebands
Digital-Kanten Perfekt bis ins kleinste Detail.
Einzigartig: Dank innovativer Technologie bilden Kante und Platte eine harmonische Einheit. Damit lassen sich jetzt auch High-End-Arbeitsplatten mit der passenden Kante perfekt in Szene setzen.
Digital Edgebands Perfect down to the smallest detail.
Unique: Innovative technology will combine edgeband and board to create a harmonious whole. Now you can set high-end worktops perfectly in scene with identically matched edgebands.
Ihre Vorteile im Überblick: Perfekter Dekorverbund Harmonische Optik wie aus einem Guss Ab dem ersten Meter weltweit lieferbar Your advantages at a glance: Perfect match Harmonious image, as if created together Worldwide supply, from the first meter
Einzigartige KantenlösungAuch zu den Dekoren der Formica 180fx® Series er- halten Sie maßstabsge- treue Arbeitsplattenkanten direkt ab Lager. Dank Rapportlängen von über 2.000 mm und Premium- Hochglanz entstehen so be- eindruckende Arbeitsplatten wie aus einem Guss.
Unique Edgeband solutionWe can also offer dimensionally accurate work-top edgebands ex stock, matched to the Formica 180fx® Series surface prints. With a repeat pattern of over 2000 mm and a premium high gloss finish, the impressive overall worktop effect leaves you to believe it has been created from a single source.
Dig
ital
e K
ante
n | D
igit
al e
dg
eban
ds
276 277unverbindliche Farbabbildungen | non-binding colour illustrations
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
DekorabbildungDekorabbildung
Kanten-Nr.Edgeband No.
Prägung/OberflächeEmbossing/Surface
AbmessungDimension
43 x 1,5OHNE Digital
DC 07U7 43 x 1,5OHNE Digital
DC 07U8
43 x 1,5OHNE Digital
DC 07U9 43 x 1,5OHNE Digital
DC 08U0
43 x 1,5W-200 Digital
DC 28U9 43 x 1,5W-200 Digital
DC 29U0
43 x 1,5W-103 Digital
DC 29U1 43 x 1,5W-86 Digital
DC 29U3
43 x 1,5W-200 Digital
DC 29U4 43 x 1,5W-86 Digital
DC 29U5
43 x 1,5OHNE Digital
DC 29U6 43 x 1,5W-86 Digital
DC 29U7
43 x 1,5W-200 Digital
DC 29U8 43 x 1,5W-200 Digital
DC 29U9
43 x 1,5W-200 Digital
DC 49Q7 43 x 1,5W-200 Digital
DC 49Q8
43 x 1,5W-242 Digital
DC 67U9 43 x 1,5OHNE Digital
DC 81Q2
43 x 1,5W-200 Digital
DC 82Q0
Digital-Kanten | Digital Edgebands
Dig
ital
e K
ante
n | D
igit
al e
dg
eban
ds
278 279
1. Die Besonderheiten von Döllken ABS-Kanten
Döllken ABS-Kanten werden im Extrusionsverfahren hergestellt und sind vollständig durchgefärbt. Die gleichmäßige Durch-färbung des Materials erlaubt eine saubere und problemlose Kantenverrundung. Die schlagfeste Materialeinstellung des Döllken-ABS garantiert hohe Standzeiten für Fräs- und andere Schneidwerkzeuge. Döllken ABS-Kanten sind rückseitig mit einem Universal-Haftvermittler beschichtet, der eine einwandfreie Haftung der Kante am Trägermaterial in Verbindung mit allen geeigneten Heißschmelzklebern, aber auch Lösemittelklebern, erlaubt.
Döllken ABS-Kanten verfügen jedoch bereits im unverklebten Zustand über sehr niedrige Werte im „freien Schrumpf“. Positiv ist hier auch die Formbeständigkeit von ABS-Kanten: Eine Materialerweichung tritt erst ab 94 (± 2) °C (Vicat B 50) auf.
1. What’s special about Döllken ABS Edgebands
Döllken ABS Edgebands are manufactured in an extrusion process and are through-coloured. The even through-colouring of the material enables clean and simple rounding off of edges. The impact resistant Döllken-ABS material guarantees long service life of milling and other cutting tools. Döllken ABS Edgebands are coated on the back with a universal primer, to enable perfect adhesion of the edgeband to the substrate, using any suitable hot melt glue or solvent-based adhesive.
Döllken ABS Edgebands have very low “free shrinkage” in the unglued condition already. The dimensional stability of ABS Edgebands is another positive feature: The material starts softening only after 94 (± 2) °C (Vicat B 50).
2. Werkstoffcharakteristiken ABS
ABS (Acrylnitril-Butadien-Styrol) ist ein schlagfester, mechanisch und thermisch belastbarer, hochwertiger thermoplastischer-Kunststoff mit positiver Öko-Bilanz. Seit mittlerweile über 20 Jahren wird dieser chlorfreie Kunststoff erfolgreich in der Möbel- industrie eingesetzt. Insbesondere sind es die hervorragenden Anwendungs-, Verarbeitungs- und Entsorgungseigenschaften des ABS, die zu seiner breiten Marktdurchdringung in der Möbelherstellung beitragen.
2. Material characteristics ABS
ABS (acrylonitrile butadiene styrene) is an impact resistant, mechanically and thermally robust, high grade thermoplastic with a positive eco balance. For the last 20 years this chlorine-free plastic has been successfully used in the furniture industry. The outstanding application, processing and disposal features of ABS contribute to its broad market penetration, in particular, in furniture production.
3. Einsatzgebiete Döllken ABS-Kanten
Das Spektrum der Einsatzgebiete der Döllken ABS-Kanten ist nahezu unbegrenzt: vom Büro über Bad und Küche, den Messe- und Ladenbau, den Wohnbereich bis hin zu Objektausstattungen. Die besonders verarbeitungsfreundliche Rohstoffrezeptur des Döllken-ABS ermöglicht neben der Geradeausverarbeitung ebenfalls einen problemlosen Einsatz an allen geschwunge-nen Möbelgeometrien, unabhängig davon, ob Innen oder Außenradien erforderlich sind. Im Hinblick auf die überzeugenden Entsorgungseigenschaften werden heute vielfach im Bereich der öffentlichen und privaten Ausschreibungen ABS-Kanten zwingend vorgeschrieben.
3. Döllken ABS Edgeband applications
The range of applications for Döllken ABS Edgebands is almost never-ending: from office via bathroom and kitchen, via exhi-bition stands and shopfitting, in the home and general interior furnishing. The Döllken-ABS raw material formulation makes it particularly easy to work with and, over and above straight application, also offers simple application on all curved furniture shapes, irrespective whether inside or outside radii. With a view to their excellent disposal properties, ABS Edgebands are often mandatory components in public and private tenders.
4. Maschinelle Verarbeitung
Döllken ABS-Kanten können auf allen Kantenanleimmaschinen (Geradeausverarbeitung und BAZ) mit Schmelzklebertechnik verarbeitet werden. Verleimen, Kappen, Fräsen, Bearbeitung mit der Ziehklinge sowie die nachträgliche Bearbeitung mit Polier- scheiben und Heißluftdusche für hochwertige Oberflächen sind problemlos möglich. Für eine saubere und dauerhafte Kanten- beschichtung müssen einige zentrale Verarbeitungsparameter beachtet werden, die z. T. von den eingesetzten Materialien (Kanten, Kleber, Platten), von der Kantenanleimmaschine und von den Umgebungstemperaturen abhängig sind. Es empfiehlt sich daher, die jeweils optimalen Einstellungen durch Versuche zu bestimmen. Die von den Herstellern für den jeweiligen Ein-satzzweck vorgegebenen Richtwerte sind hierbei zu beachten.
KlebstoffDöllken ABS-Kanten können mit allen marktüblichen Heißschmelzklebern (EVA, PA, APAO, PUR) verarbeitet werden. Hoch-wärmestandfeste Kleber garantieren zusammen mit der schrumpfarmen Rohstoffrezeptur des Döllken-ABS auch bei Kanten über 3 mm Stärke eine sichere Verklebung. Besonders wärmestandfeste Kleber werden empfohlen bei hohen Anwendungs- temperaturen, z. B. im Herdbereich der Küche bzw. beim Möbelexport in Containern. Bei der Verklebung muss darauf geachtet werden, dass stets eine ausreichende Klebermenge im Behälter verfügbar ist, um eine gleichbleibende Temperatur beim Klebstoffauftrag zu gewährleisten. Die Verarbeitungstemperatur des Klebers variiert je nach Klebstofftyp zwischen 90 und 220 °C. Beachten Sie bitte, dass die Thermostate im Schmelzbehälter oft ungenau arbeiten und deutlich von der tatsächlichen Temperatur an der Auftragswalze abweichen können. Es empfiehlt sich, die Temperatur an der Auftragswalze zu messen. Eine Verklebung von Döllken ABS-Kanten im KA-Verfahren mit Weißleim ist nicht möglich.
KlebstoffauftragsmengenBitte beachten Sie die Angaben der Kleberhersteller. Der Kleberauftrag soll gleichmäßig und so reichlich bemessen sein, dass an den Rändern der frisch verklebten Kante kleine Perlen herausgedrückt werden und die Hohlräume zwischen den Spänen ausgefüllt sind. Die jeweilige Leimauftragsmenge ist abhängig von der Spanplattendichte und dem Klebstofftyp.
VerarbeitungstemperaturFür bestmögliche Ergebnisse bei der Kantenbeschichtung sollten Platten und Kanten bei Raumtemperatur verarbeitet werden (nicht unter 18 °C). Bei Außenlagerung sollte das Material über Nacht aufgewärmt werden. Bei zu kalten Platten oder Kanten bindet der aufgetragene Schmelzkleber noch vor Aufbringung des Kantenbandes ab. Aus diesem Grund sollte auch Zugluft vermieden werden.
HolzfeuchtigkeitDie optimale Holzfeuchtigkeit des Plattenmaterials für die Weiterverarbeitung liegt zwischen 7 und 10 %.
VorschubgeschwindigkeitDie besondere Rohstoffrezeptur der Döllken ABS-Kanten ist auf die Vorschubgeschwindigkeit sowohl beim Kleinverarbeiter als auch in der Großindustrie abgestimmt. Geschwindigkeiten von 10 bis zu 100 m/min. sind in Abhängigkeit der Kantenanleim-maschine möglich. Auch auf modernen Portalbearbeitungszentren sind Geschwindigkeiten von 30 m/min. in Abhängigkeit der Geometrie machbar.
Verarbeitungsanleitung ABS-Kanten | Instructions ABS Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
280 281
AndruckrollenAchten Sie unter Berücksichtigung der Maschinengegebenheiten auf die richtige Anzahl und auf die Andruckeinstellung, um das bestmögliche Fugenbild zu erhalten.
AbsaugungThermoplastkanten benötigen eine stärkere Absaugung als Duroplastkanten. Vorteilhaft bei den Döllken ABS-Kanten ist die geringere statische Aufladung im Vergleich zu anderen thermoplastischen Rohstoffen.
FräsenVerwenden Sie möglichst 3- bis 6-schneidige Fräser mit einem Durchmesser von ca. 70 mm und 12.000 bis 18.000 U/min. Falsche Drehzahlen oder stumpfe Werkzeuge können die Kanten beschädigen. Bei eventuell auftretendem Schmiereffekt ist die Drehzahl des Fräsers zu reduzieren bzw. muss im „Gegenlauf“ gefräst werden (ggf. Vorschub erhöhen).
ZiehklingenbearbeitungDa der Werkstoff ABS zum leichten Aufhellen nach der Ziehklingenbearbeitung neigt, sollte der Ziehklingenspan maximal 0,1 bis 0,2 mm betragen. Die hierfür erforderliche, möglichst rattermarkenfreie Fräsung wird durch Fräswerkzeuge mit hoher Rundlaufgenauigkeit gewährleistet. Der Einsatz von DIA-Werkzeugen ist hilfreich. Zur weiteren Optimierung der Ziehklingen- bearbeitung, insbesondere bei kritischen Farben, können Heißluftaggregate eingesetzt werden.
SchwabbelnDöllken ABS-Kanten lassen sich mit der Schwabbelscheibe im Radius sehr gut bearbeiten. Die eventuell von der Ziehklingen- bearbeitung auftretenden Aufhellungen lassen sich mit Hilfe von Schwabbelscheiben einfach wegpolieren und die Farbe des Radius entspricht der Kantenbandoberfläche. Zusätzlich können bei Kantenband-Anleimmaschinen, welche im Durchlauf arbeiten, ebenfalls die Leimreste mit Hilfe der Schwabbelscheibe entfernt werden. Darüber hinaus können Leimreste ebenfalls mit elektronisch gesteuerten Trennmittel-Sprühaggregaten, die in der Industrie standardmäßig eingesetzt werden, entfernt werden. Gleichzeitig wird hierdurch auch die Ziehklingenspanabnahme verbessert.
4. Processing by machine
Döllken ABS Edgebands can be processed on all edgeband machines (straight processing and machinery for curved profiles) using hot melt glue. Gluing, cross-cutting, milling, scraping and subsequent buffing with polishing wheels and hot-air dryers for high quality surfaces pose no problem. To ensure clean and durable edgeband application, certain salient processing para- meters should be followed which may be dependent on the materials used (edgebands, glue, boards), the edgeband machine and ambient temperatures. Trials to determine relevant optimal settings are therefore recommended. Manufacturers’ guidelines for an intended application should also be taken into account.
AdhesiveAll conventional hot melt glues (EVA, PA, APAO, PUR) may be used on Döllken ABS Edgebands. The low-shrink raw material formulation of Döllken ABS, together with highly heat-resistant adhesives can guarantee reliable bonding even for edgebands thicker than 3 mm. Particularly heat-resistant adhesives are recommended for applications exposed to high temperatures, e.g. in the vicinity of kitchen ovens or for furniture exported in containers. Ensure that the glue hopper on the edgeband machine has sufficient glue in order to maintain a constant temperature during application. The glue application temperature will vary between 90 °C and 220 °C, depending on the type of adhesive. Please note that thermostats in hot melt hoppers are often inaccurate and may deviate considerably from the actual temperature on application rollers. It is advisable to measure the temperature on the application roller. Döllken ABS Edgebands cannot be glued using PVAC glue and the CA method.
Adhesive amounts to apply Please follow the adhesive manufacturer’s instructions. Apply the adhesive evenly and in sufficient quantities for beads of adhesive to be pressed out along the edges of the freshly glued edgebands, ensuring that the spaces between board wood-chips will be filled. The amount of glue required depends on the density of the chipboard and the type of adhesive.
Application temperatureFor best results fitting edgebands, work with boards and edgebands at room temperature (not below 18 °C). Material stored outdoors should be warmed up overnight. Hot melt glue will cure before the edgeband is in place if the temperature of the board or edgeband is too low. Draughts should for this reason also be avoided.
Wood moistureThe optimal moisture content of the boards should be between 7 and 10 % for further processing.
Feed rateThe special Döllken ABS Edgeband raw material formulation is designed to suit feed rates required in both low and high volume processing. Depending on the edgeband gluing machine, speeds between 10 and 100 m/min. are possible. Speeds of up to 30 m/min. are also feasible on modern portal type machining centres, depending on the shape of the profile to be processed.
Press rollersBearing in mind the machine parameters, ensure that an adequate number of rollers are available and adjust the pressure to achieve the best possible appearance of the joint.
ExtractionThermoplastic edgebands require higher extraction power than duroplastic edgebands. Döllken ABS Edgebands have the advantage that electrostatic charging is lower, compared to other thermoplastic raw materials.
MillingIf possible, use cutters with 3 to 6 teeth, with ca. 70 mm diameter and at speeds between 12 000 and 18 000 rpm. Incorrect speeds or blunt cutters may damage the edgebands. In the event of smearing, reduce the speed of the cutter or cut against the feed (increase feed, if necessary).
ScrapingSince ABS colours tend to fade slightly after scraping, the plastic scrapings should be 0.1 to 0.2 mm thick at the most. To avoid chatter marks, the routers used for milling should be running absolutely true. Diamond coated cutters are recommen-ded. Hot air blowers may be used for optimal scraping results where colour shades are critical.
BuffingBuffing wheels are ideal for buffing the radii of Döllken ABS Edgebands. Any fading after scraping may simply be buffed away with these wheels, with the colour of the radius then matching that of the edgeband itself. With through-feed edgeband machines, remnants of the glue may also be removed with the buffing wheel. Glue remnants may also be removed using electronically controlled release agent spraying units as is common in industry. This improves the scraper blade finish as well.
5. Manuelle Verarbeitung
Die manuelle Verarbeitung von Döllken ABS-Kanten ist ebenfalls problemlos möglich, z. B. mittels eines Verleimständers oder einer Kantenpresse. Als Kleber empfehlen sich hier zweikomponentige Dispersionskleber auf Acrylbasis oder geeignete Kontakt- kleber. Bitte informieren Sie sich direkt bei Ihrem Kleberhersteller. Eine Verklebung mit einkomponentigem Holz-Weißleim ist nicht möglich. Für die Verklebung von Hand lassen sich spezielle Lackleime, Lösemittelkleber oder Kartuschenklebstoffe (PU) einsetzen. Eine Typenliste stellen wir Ihnen gerne auf Anfrage zur Verfügung. Die Verklebung sollte bei Raumtemperatur erfolgen. Beim Einsatz von Kontaktklebern ist zu berücksichtigen, dass nach dem Kleberauftrag auf Kante und Platte die Ablüftzeit ein- gehalten werden muss, um eine optimale Kantenverklebung sicherzustellen. Anschließend wird die Kante angeklopft. Beim Ein- satz von Dispersionsklebern muss auf den verklebungsbeschleunigenden Einsatz von Temperatur verzichtet werden (z. B. Heiz- schienen). Nach dem Aushärten (je nach Kleber bis ca. 6 Stunden) kann mit der Weiterbearbeitung begonnen werden (siehe hierzu Punkt 4).
Verarbeitungsanleitung ABS-Kanten | Instructions ABS Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
282 283
5. Manual processing
Döllken ABS Edgebands may also be applied manually, using a gluing jig or edgeband press, for instance. 2-component, acrylic based dispersion adhesives or suitable contact adhesives are recommended. For further information, please contact your adhesives manufacturer directly. Single component wood PVAC glue is not suitable for gluing. Special lacquer adhesives, solvent glues or cartridge adhesives (PU) may be used for manual gluing. We will gladly provide you with a list of adhesives on request. Gluing should be carried out at room temperature. To achieve optimal edgeband bonding when using contact adhesives, ensure that the curing time after applying adhesive to edgeband and board is adhered to. This is followed by tapping on the edgeband. Heating to speed up adhesion (e.g. heating rails) is superfluous when using dispersion glues. Processing may continue after curing (up to ca. 6 hours, depending on adhesive) (see Point 4).
6. Mechanische Eigenschaften
AbriebfestigkeitDie Oberfläche von bedruckten Döllken ABS-Kanten wird mit UV-gehärtetem Acryllack kratzfest versiegelt. Die Druckbilder weisen zudem eine hervorragende Kratz- und Abriebfestigkeit auf. Sie entsprechen der Beanspruchungsgruppe 2E, DIN 68861 1-8.
Kugeldruckhärte/Shore-Härte D Nach DIN EN ISO 2039-1 bzw. DIN EN ISO 868 erreicht Döllken-ABS auch bei der Oberflächenhärte sehr gute Ergebnisse.
WärmeformbeständigkeitMit einem Wert von 94 (± 2) °C nach Vicat B 50 sind Döllken ABS-Kanten für den Einsatz in der Möbelindustrie und im Innen-ausbau hervorragend geeignet.
LackierungDöllken ABS-Kanten in Unifarben lassen sich ohne Vorbehandlung problemlos in der von Ihnen gewünschten Farbe lackieren. Verwenden Sie PUR-Lacke oder Acrylat-basierende Lacke. Vermeiden Sie Nitro-Cellulose-Lacke. Nähere Informationen über den am besten geeigneten Lacktyp erhalten Sie von Ihrem jeweiligen Lackhersteller.
6. Mechanical characteristics
Resistance to abrasionThe surface of printed Döllken ABS Edgebands is sealed using UV-hardened acrylic varnish for a scratch-resistant finish. The printed patterns also have excellent resistance to scratching and abrasion. They are compliant with Stress Group 2E, DIN 68861 1-8.
Ball indentation/shore hardness DAccording to DIN EN ISO 2039-1 or DIN EN ISO 868, Döllken ABS results are excellent, also in terms of surface hardness.
Resistance to warp under heatWith a value of 94 (± 2) °C as per Vicat B 50, Döllken ABS Edgebands are ideally suited for use in the furniture industry and for interior furnishing.
VarnishingPlain coloured Döllken ABS Edgebands may be varnished with a colour of your choice without a problem and without requiring prior treatment. Use PUR or acrylic-based varnishes. Do not use nitro-cellulose varnishes. Contact your coatings manufacturer for the most suitable type of varnish.
7. Lichtechtheit
Döllken ABS-Kanten werden in einem speziellen Verfahren im Döllken Technikum ständig hinsichtlich ihrer Lichtechtheit geprüft. Mit einer Lichtbeständigkeit von 6 bis 7 gemäß Wollfarbskala sind sie bestens für den Inneneinsatz geeignet (DIN EN 15187).
7. Lightfastness
The Döllken Technical Department uses a special method for regular tests on Döllken ABS Edgebands for lightfastness. With a permanence of 6 – 7 on the wool colour scale, they are ideal for interior use (DIN EN 15187).
8. Reinigung
Für die Reinigung von Döllken ABS-Kanten empfiehlt sich die Verwendung von speziellen Kunststoffreinigern. Stark lösungs-mittelhaltige und alkoholische Substanzen sollten nicht eingesetzt werden.
8. Cleaning
Special plastic cleaning agents are recommended for Döllken ABS Edgebands. Do not use substances with substantial solvent or alcohol content.
9. Entsorgung
Reste der Döllken ABS-Kanten können zusammen mit Späneresten in den dafür genehmigten Anlagen problemlos verbrannt werden. Es entstehen keine Chlorverbindungen. Die Grenzwerte der strengen TA-Luft werden eingehalten. Auch Spanplatten mit angefahrenen ABS-Kanten können so problemlos von Ihrem Spanplattenhersteller entsorgt werden. Ein mühsames Sortieren der Abfälle bzw. die Trennung von Kante und Platte entfällt.
9. Disposal
Döllken ABS Edgeband waste may be incinerated together with wood chips in relevantly authorised plant. No chlorine com-pounds are generated. The stringent TA-Luft [Technical Guidelines on Air Quality] limits are complied with. Your chipboard manufacturer can also dispose of waste chipboard with ABS Edgebands without a problem. There is no need for time-consu-ming sorting of waste or separation of edgebands from boards.
Verarbeitungsanleitung ABS-Kanten | Instructions ABS Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
284 285
10. Qualität/Toleranzen
Für eine gleichbleibend hohe Qualität der Döllken ABS-Kanten sorgen umfangreiche Qualitätssicherungsmaßnahmen wie die ständige Verbesserung der Rohstoffeigenschaften im eigenen Technikum. Die Fertigungstoleranzen für Kantenbänder sind eng definiert und werden bei jeder Fertigung regelmäßig überprüft.
a. Breiten-Toleranzen
Breite ABS-Kanten
0 – 30 mm ± 0,5 mm
> 30 mm ± 0,5 mm
b. Stärken-Toleranzen
Stärke ABS-Kanten
0 – 1,0 mm+ 0,10 mm
– 0,15 mm
1,1 – 2,0 mm+ 0,10 mm
– 0,20 mm
2,1 – 4,0 mm+ 0,15 mm
– 0,25 mm
> 4,0 mm+ 0,20 mm
– 0,30 mm
c. Vorspannungs-Toleranzen
StärkeBreitebis 30 mm
Breiteab 30 mm
0 – 1,0 mm 0,00 – 0,50 mm 0,00 – 0,70 mm
1,1 – 2,0 mm 0,00 – 0,30 mm 0,00 – 0,35 mm
2,1 – 4,0 mm 0,10 – 0,20 mm 0,10 – 0,30 mm
4,1 – 6,0 mm 0,00 – 0,20 mm 0,00 – 0,25 mm
> 6,0 mm 0,00 – 0,10 mm 0,00 – 0,15 mm
d. Planparallelität
Stärke Maximale Abweichung
0 – 1,0 mm max. 0,10 mm
1,1 – 2,0 mm max. 0,10 mm
2,1 – 4,0 mm max. 0,15 mm
> 4,0 mm max. 0,20 mm
e. LängsverzugAuf 1 m Länge max. 3 mm Verzug.
10. Quality/Tolerances
The consistently high quality of Döllken ABS Edgebands is ensured through comprehensive quality assurance measures such as our Technical Department’s ongoing improvement of raw material characteristics. Manufacturing tolerances for edgebands are narrow and are checked for each manufacturing run.
a. Width tolerances
Width ABS Edgebands
0 – 30 mm ± 0.5 mm
> 30 mm ± 0.5 mm
b. Thickness tolerances
Thickness ABS Edgebands
0 – 1.0 mm+ 0.10 mm
– 0.15 mm
1.1 – 2.0 mm+ 0.10 mm
– 0.20 mm
2.1 – 4.0 mm+ 0.15 mm
– 0.25 mm
> 4.0 mm+ 0.20 mm
– 0.30 mm
c. Pretensioning tolerances
ThicknessWidthto 30 mm
Widthfrom 30 mm
0 – 1.0 mm 0.00 – 0.50 mm 0.00 – 0.70 mm
1.1 – 2.0 mm 0.00 – 0.30 mm 0.00 – 0.35 mm
2.1 – 4.0 mm 0.10 – 0.20 mm 0.10 – 0.30 mm
4.1 – 6.0 mm 0.00 – 0.20 mm 0.00 – 0.25 mm
> 6.0 mm 0.00 – 0.10 mm 0.00 – 0.15 mm
d. Plane parallelism
Thickness Maximum deviation
0 – 1.0 mm max. 0.10 mm
1.1 – 2.0 mm max. 0.10 mm
2.1 – 4.0 mm max. 0.15 mm
> 4.0 mm max. 0.20 mm
e. Longitudinal warpageMax. 3 mm warpage per 1 m length.
Verarbeitungsanleitung ABS-Kanten | Instructions ABS Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
286 287
1. Die Besonderheiten von Döllken 3D-Kanten
Mit einem von Döllken entwickelten, völlig neuartigen Verfahren werden 3D-Kanten hergestellt, die eine neue Kantengeneration für die Möbelfertigung darstellen.
Döllken 3D-Kanten sind aus hochtransparentem Acryl hergestellt. Die besondere, dreidimensionale Wirkung erzielt die Kante durch die rückseitig aufgebrachten Dekore.
Dadurch, dass sich das Dekor auf der Kantenrückseite befindet, bleibt es auch im angefrästen Radius vollständig erhalten und bietet rundherum eine geschlossene Optik ohne Rahmeneffekt. Die seidenmatte Oberfläche der Kante lässt sich durch Polieren auf nahezu jeden gewünschten Glanzgrad einstellen. Bei den Premium-Varianten der 3D-Kanten entfällt das Polieren, da sie bereits mit einem Abschluss-Lack versehen sind.
Durch seine rückseitige Platzierung kann das Dekor selbst bei hoher Beanspruchung nicht mehr abgerieben oder beschädigt werden. Mechanische Beschädigungen auf der Acryloberfläche, wie z. B. Kratzer oder Druckstellen, können problemlos nach- poliert werden.
Die Döllken 3D-Kante ist schlagfest, hygienisch und resistent gegenüber allen üblichen Raumfeuchtigkeiten.
1. Special features of Döllken 3D Edgebands
Döllken has developed a novel method for manufacturing 3D Edgebands, representing a new generation of edgebands for furniture manufacture.
Döllken 3D Edgebands are made of ultra transparent acrylic. The special, three-dimensional effect of the edgeband is created by the surface print on the reverse side.
Because the surface print is on the back of the edgeband, it also remains fully intact after milling the radius, creating a uniform appearance all-round, with no frame effects. The matt silk edgeband surface may be polished to virtually any desired gloss. Polishing is unnecessary with premium type 3D Edgebands, since they have a finishing varnish already.
Since the surface print is on the reverse side, it cannot be rubbed off or damaged, no matter how high the stress. Physical damage to the acrylic surface, such as scratches or indentations, is easily remedied by buffing.
Döllken 3D Edgebands are impact resistant, hygienic and withstand normal humidity of ambient air.
2. Werkstoffcharakteristik Acryl
Acryl (PMMA = Polymethylmethacrylat) ist ein sehr hochwertiger und langzeitbewährter Thermoplast-Kunststoff, der in Form der Döllken 3D-Kante neue technische und ästhetische Maßstäbe bei Möbelkanten setzt. Darüber hinaus ist die Transparenz des Acryls besser als bei Glas.
2. Acrylic material characteristics
Acrylic (PMMA = Polymethylmethacrylate) is an established high grade thermoplastic, setting new technical and aesthetic furniture edging standards in in the form of the Döllken 3D Edgebands. The transparency of Acrylic furthermore exceeds that of glass.
3. Einsatzgebiete der Döllken 3D-Kanten
Döllken 3D-Kanten sind nahezu überall einsetzbar: z. B. an Möbelfronten im Küchen- und Wohnmöbelbereich, in Bädern, an Küchenarbeitsplatten, an Bürotischen sowie im Laden- und Objektbau.
3. Applications for Döllken 3D Edgebands
Döllken 3D Edgebands may be used virtually anywhere: e.g. as facings on kitchen and living room furniture, in bathrooms, on kitchen worktops and office desks and for shop fittings and interiors.
4. Maschinelle Verarbeitung
Durch eine besonders verarbeitungsfreundliche Rohstoffcharakteristik kann die Döllken 3D-Kante problemlos sowohl manuell als auch maschinell verarbeitet werden.
DurchlauftechnikDie Geradeausverarbeitung der Döllken 3D-Kante ist auf allen gängigen Kantenanleimmaschinen problemlos möglich. Es ist darauf zu achten, dass Kantentransport- bzw. Kantenführungswalzen keine Beschädigungen an der Kante hervorrufen können. Gummierte Walzenausführungen für den Kantenbandeinzug haben sich daher bei den Maschinen bewährt. Bei den 3D-Kanten ist eine saubere Fügefräsung erforderlich. Dies gilt insbesondere für DC 7XXR.
StationärtechnikSpeziell für die Verarbeitung von geschwungenen Formteilen auf CNC-gesteuerten Bearbeitungszentren (BAZ) oder halbauto- matischen Hand-Kanten-Verarbeitungsmaschinen hat Döllken eine neue Materialrezeptur entwickelt, die Döllken 3D-BAZ-Kante.
Döllken 3D-BAZ-Kanten zeichnen sich durch eine besonders verarbeitungsfreundliche Materialrezeptur aus, die speziell für die Verarbeitung von engen Radienkonturen ausgelegt ist. Wie bei jedem thermoplastischen Kunststoff ist auch hier bei der Radien- erstellung grundsätzlich für eine ausreichende Materialdurchwärmung zu sorgen. Dabei trägt die Dekorfarbe der Döllken 3D-Kante eine entscheidende Rolle. Standardfarben – wie z. B. Unifarben oder Holzdekore – nehmen Wärmeenergie durch die Infrarot-strahlung der Verarbeitungsmaschinen hervorragend auf. Metallicfarben hingegen können einen großen Teil der Infrarotstrahlung reflektieren. Daher empfiehlt es sich, mit zusätzlichen Erwärmungsmöglichkeiten zu arbeiten. Heißluftaggregate und/oder Kanten-Magazinöfen bieten hier eine hervorragende Prozessunterstützung.
In der Stationärverarbeitungstechnik setzen viele Maschinenhersteller (wie z. B. IMA oder HOMAG) bei der Kantenverarbeitung auf eine Schmelzkleberdirektangabe auf das Kantenband. Damit es hierbei nicht zu Beschädigungen des Kantenbanddekors kommt, hat Döllken zusammen mit den Maschinenherstellern spezielle Leimauftragswalzen entwickelt. Diese Leimwalzen zeichnen sich dadurch aus, dass die sonst üblichen Stahlwalzen modifiziert worden sind. Die Verarbeitung, auch von allen anderen geprimerten Kantenbandwerkstoffen, ist mit diesen speziellen Leimauftragswalzen erprobt. Bei Bearbeitungszentren, die mit Schmelzkleberangabe auf der Platte arbeiten (wie z. B. BIESSE oder MORBIDELLI), besteht die Notwendigkeit einer speziellen Leimauftragswalze nicht.
Grundsätzlich ist für den Transport und für die Führung der Döllken 3D-Kanten durch die Verarbeitungsmaschinen darauf zu achten, dass gummierte Walzen eingesetzt werden.
VerklebungDöllken 3D-Kanten und Döllken 3D-BAZ-Kanten sind einheitlich mit einem Universalhaftvermittler beschichtet, wodurch eine einwandfreie Verklebung zu allen geeigneten Heißschmelzklebern gewährleistet wird. Für manuelle Verklebungen ist, unter Einhaltung einer bestimmten Presszeit, die Verwendung von speziellen Dispersionsklebern möglich (s. manuelle Verarbeitung). Döllken 3D-Kanten können mit den meisten Heißschmelzklebern auf EVA-, PA-, APAO- oder PUR5-Basis verarbeitet werden. In der Regel ist die Verklebungsgüte mit ungefüllten oder nur gering gefüllten Klebstoffen am hochwertigsten. Zusammen mit
Verarbeitungsanleitung 3D-Kanten | Instructions 3D Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
288 289
hochwärmestandfesten Klebertypen, zu denen PUR6-, APAO- oder PA-Heißschmelzkleber zählen, ist mit den schrumpfarmen Rohstoffrezepturen der Döllken 3D-Kante eine sichere Verklebung auch bei höheren Anwendungstemperaturen gewährleistet.
Diese Eigenschaft zeichnet sich z. B. besonders im Herd- und Ofenbereich einer Küche oder beim Möbelexport in Containern aus.
Döllken 3D-Kanten verfügen bereits im unverklebten Zustand über gute Werte im „freien Schrumpf“. Positiv ist hier auch die Form- beständigkeit der Döllken 3D-Kanten: Eine Materialerweichung tritt bei einer Vicat B 50-Prüfung erst oberhalb von 90 (± 3) °C ein.
Bei der maschinellen Verklebung ist darauf zu achten, dass stets eine ausreichende Klebermenge im Behälter verfügbar ist. Die aufzutragende Klebstoffmenge muss grundsätzlich gleichmäßig und ausreichend bemessen sein, so dass an den Rändern der frisch verklebten Kanten kleine Klebstoffperlen herausgedrückt werden, Hohlräume zwischen den Holzspänen der Platten ausgefüllt sind und eine vollflächige Verklebung gewährleistet ist. Die jeweilig benötigte Leimauftragsmenge ist u. a. von der Dichte der Spanplattenpressung abhängig: Je niedriger die Dichte der Spanplattenpressung, desto höher die erforderliche Schmelzklebermenge.
Die von den Klebstoffherstellern empfohlenen Verarbeitungsvorgaben sind einzuhalten. Je nach Klebstofftyp und Klebstoff-basis kann die vom jeweiligen Hersteller vorgegebene Verarbeitungstemperatur zwischen 90 – 210 °C variieren. Beachten Sie bitte, dass die Thermostate im Schmelzbehälter oft ungenau arbeiten und deutlich von der tatsächlichen Temperatur an der Auftragswalze abweichen können. Eine Typenliste geeigneter Schmelzklebstoffe für die BAZ-Verarbeitung stellen wir Ihnen auf Anfrage gerne zur Verfügung.
Eine Verklebung der Döllken 3D-Kanten im Kantenanleim-Verfahren mit Weißleimen ist nicht möglich.
VerarbeitungstemperaturFür bestmögliche Ergebnisse bei der Kantenbeschichtung sollten Platten und Kanten bei Raumtemperatur verarbeitet werden (nicht unter 18 °C). Bei Außenlagerung sollte das Material über Nacht aufgewärmt werden. Bei zu kalten Platten oder Kanten bindet der aufgetragene Schmelzkleber noch vor Aufbringung des Kantenbandes ab. Aus diesem Grund sollte auch Zugluft vermieden werden.
HolzfeuchtigkeitDie optimale Holzfeuchtigkeit des Plattenmaterials für die Weiterverarbeitung liegt zwischen 7 – 10 %.
VorschubgeschwindigkeitGeschwindigkeiten bis zu 30 m/min. sind problemlos möglich.
AndruckrollenUnter Berücksichtigung der Maschinengegebenheiten ist die richtige Anzahl und Einstellung der Andruckrollen ganz entschei-dend für ein bestmögliches Fugenbild. Um Fugenöffnungen oder Hohlräume zu vermeiden, ist der Anpressdruck mindestens so hoch einzustellen, dass die Kantenbänder stets vollflächig an den Platten fixiert werden. Die Andruckrollen selbst müssen absolut sauber sein, um Druckstellen auf den Kantenbändern zu vermeiden.
KappmesserDas Kappmesser sollte mit scharfer Klinge das Kantenmaterial splitterfrei trennen, wobei der Überstand für die Kappfräsung möglichst gering gewählt werden sollte, um das spätere Abfräsen zu erleichtern.
KappsägeDie Kappsägen sollten mit angepasstem Vorschub splitterfrei in das Kantenmaterial tauchen. Eine einseitig spitze Verzahnung „ES“ hat sich hier als vorteilhaft erwiesen, da sie den Kantenwerkstoff geschmeidiger durchtrennt als z. B. Kappsägeblätter, die im Wechsel verzahnt „WS“ sind.
Bündig- oder RadienfräsungDer Überstand zum Zerspanen sollte auf beiden Seiten gleichmäßig sein und nicht mehr als 1,5 mm Überstand betragen. Vor-zugsweise sollte der Kantenbandüberstand nicht mehr als die Kantenbandstärke betragen. Ein zu hoher Überstand vergrößert die Splittergefahr. Durch eine Bearbeitung mit Fasenfräsern lassen sich bei der Döllken 3D-Kante besondere Designeffekte erzielen. Grundsätzlich empfehlen sich für die Fräsbearbeitung mehrschneidige Werkzeuge, mit mind. 4 – 6 Schneiden und eine Bearbeitungsdrehzahl von 12.000 – 18.000 min.
ZiehklingenbearbeitungDie Döllken 3D-Kanten lassen sich sehr gut und weißbruchfrei mit der Ziehklinge bearbeiten. Damit der Weißbruchbildung schon im Vorfeld entgegengewirkt wird, sollte der Ziehklingenspan nicht mehr als 0,1 mm betragen.
PolierenNach den spanenden Bearbeitungsvorgängen lässt sich das Material anschließend mit einer weichen Schwabbelscheibe auf nahezu jeden gewünschten Glanzgrad polieren. Hochglanz lässt sich mit Hilfe von Polierpasten problemlos erzielen. Eine Typenliste stellen wir Ihnen auf Anfrage gerne zur Verfügung. Einige Maschinenhersteller bieten maschinelle Polieraggregate an. Bitte wenden Sie sich hierzu an Ihren Maschinenhersteller. Außerdem lassen sich Leimreste mit elektronisch gesteuerten Trennmittel-Sprühaggregaten entfernen. Beim Einsatz von Prozess-Hilfsstoffen (wie Trennmitteln) ist unbedingt vorher zu prüfen, dass diese keine Lösungsmittel und Alkohole enthalten, da PMMA nicht damit in Berührung kommen darf.
AbsaugungThermoplastkanten benötigen grundsätzlich eine stärkere Absaugung als Duroplastkanten bzw. als Melaminkanten. Vorteilhaft bei den Döllken 3D-Kanten ist die geringere statische Aufladung im Vergleich zu anderen thermoplastischen Kantenmaterialien.
4. Processing by machine
Due to a special formulation of materials with excellent processing characteristics, Döllken 3D Edgebands are easy to process either manually or by machine.
Through-feedStraight processing of Döllken 3D Edgebands poses no problems on all conventional edgeband gluing machines. It must be ensured that neither edgeband conveyor nor feed roller will damage the edgeband. Rubberised rollers for edgeband feed through have proven their merit in these machines. 3D Edgebands require meticulous milling of the joints. This applies to DC 7XXR especially.
Work station processingDöllken has developed a new material formulation, the Döllken 3D-BAZ edgeband.4, suited especially for processing of cur-ved mouldings on CNC controlled machining centres (BAZ) or on semi-automatic edgeband processing machines.
Döllken 3D-BAZ edgebands have a material formulation that is particularly suitable for machining, especially for processing of tight radii. As with every thermoplastic material, it is essential to ensure that the material is warm throughout when machi-ning a radius. The surface print colour of the Döllken 3D Edgeband is a significant factor in this case. Standard colours such as plain colours or wood finishes easily absorb heat via infrared radiation of the processing machines. Metallic colours, on the other hand, tend to reflect much of this infrared radiation. Additional sources of heat should therefore be available during machining. Hot air units and/or edgeband preparation ovens can offer excellent support to processing.
For work station edgeband processing, many machine manufacturers (e.g. IMA or HOMAG) recommend applying hot melt adhesive onto the edgeband directly. To prevent damage to the edgeband finish, Döllken and the machine manufacturers have together developed special adhesive application rollers. These gluing rollers are actually modifications of conventional steel rollers. Processing of edgebands (including all primed edgeband materials) using these special adhesive application rollers has been tried and tested. Machining centres which apply hot melt adhesive to the board (such as BIESSE or MORBIDELLI) do not need special rollers for adhesive application.
Verarbeitungsanleitung 3D-Kanten | Instructions 3D Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
290 291
Rubberised rollers should always be used for conveyance and feeding of Döllken 3D Edgebands through the processing machines.
BondingDöllken 3D Edgebands and Döllken 3D-BAZ edgebands are consistently coated with a universal primer to assure perfect bonding to all suitable hot melt adhesives. Special dispersion adhesives may be used for manual gluing, provided the given pressing time is adhered to (see manual processing). Döllken 3D Edgebands may be glued using most EVA, PA, APAO or PUR5 based hot melt adhesives.Adhesion quality is generally best using unfilled or partially filled adhesives. As with highly heat-resistant types of adhesive such as PUR6, APAO or PA hot melt adhesives, the low-shrink material formulation of Döllken 3D Edgebands deliver reliable adhesion, even at higher application temperatures.
This feature is especially advantageous in the vicinity of hobs and ovens in kitchens or for export of furniture in containers.
“Free shrinkage” of Döllken 3D Edgebands is excellent already even before gluing. The dimensional stability of Döllken 3D Edgebands is another advantage here: Vicat B 50 testing shows that softening of the material only starts at temperatures over 90 (± 3) °C.
It should be ensured with machine gluing that the glue hopper always has sufficient adhesive available. Apply the adhesive evenly and in sufficient quantities for beads of adhesive to be pressed out along the edges of the freshly glued edgebands, ensuring that the spaces between chips will be filled and gluing is full-surface. The amount of glue applied depends, among other things, on the density of the chipboard: the lower the density, the more hot melt adhesive will be required.
The adhesive manufacturers’ recommended processing guidelines must be heeded. Depending on the adhesive type and base, the application temperature specified by the manufacturer may vary from 90 °C to 210 °C. Please note that the ther-mostats in the hot melt hopper are often inaccurate and may vary considerably from the actual temperature on the application roller. On request, we will gladly provide a list of hot melt adhesive types suitable for use in machining centres.
Döllken 3D Edgebands cannot be glued using PVAC glues and the cold activation method.
Application temperatureFor best results fitting edgebands, work with boards and edgebands at room temperature (not below 18 °C). Material stored outdoors should be warmed up overnight. If the boards or edgebands are too cold, the hot melt adhesive will cure before edgeband application. Draughts should for this reason also be avoided.
Wood moistureThe optimal moisture content for further processing of the boards is between 7 and 10 %.
Feed rateSpeeds up to 30 m/min. are easily achieved.
Press rollersTaking into account machine parameters, the correct number and adjustment of the press rollers is paramount to achieving optimal appearance of the joint. To prevent gaps or cavities from appearing, the pressure of the rollers should be set high enough to ensure full-surface edgeband adhesion to the boards. The pressure rollers as such must be absolutely clean to prevent pressure marks on the edgebands.
Cross-cut bladesCross-cut blades should be sharp enough to cut the edgeband material cleanly, leaving a minimum overhang for cross-cut milling to facilitate final trim by milling.
Cross-cut sawCross-cut saws should have their feed rate adjusted to allow clean cutting of the edgeband. Single-edged fine-toothed “ES” type saw teeth are advantageous, since they produce a neater cut through the edgeband than cross-cut saw blades with “WS” type alternating teeth, for instance.
Flush or radius millingThe overhang for cutting should be the same on both sides and not exceed 1.5 mm. The edgeband overhang should prefer-ably not exceed the edgeband thickness. Too much overhang will increase the risk of chipping. Special design effects may be achieved by using chamfer bits on Döllken 3D Edgebands. As a rule, multiblade tools with at least 4 to 6 blades and an operating speed of 12 000 – 18 000 rpm are recommended for chamfering.
ScrapingScraping of Döllken 3D Edgebands will yield excellent results with no stress whitening. To prevent stress whitening, plastic scrapings should not exceed 0.1 mm in thickness.
PolishingAfter machining, the material may be polished with a soft buffing wheel to achieve virtually any desired gloss. A high gloss is easily achieved with polishing paste. We will gladly provide a list of suitable types on request. Some machine manufacturers are offering mechanical polishing units. Please contact your machine manufacturer in this regard. Adhesive residuals may also be removed using electronically controlled release agent spray guns. It is essential when using auxiliary process agents (such as release agents) to ensure that they do not contain solvents and alcohols, since PMMA should not come into contact with these.
ExtractionThermoplastic edgebands generally require higher extraction power than duroplastic or melamine edgebands. Döllken 3D Edgebands have an advantage of lower electrostatic charging compared to other thermoplastic edgeband materials.
5. Manuelle Verarbeitung
Die manuelle Verarbeitung von Döllken 3D-Kanten ist bei Raumtemperatur ebenfalls problemlos möglich. Als Vorrichtungen bieten sich dabei Verleimständer oder Kantenzwingen an. Für die Verarbeitung ohne jegliche Hilfsmittel bieten Klebstoffhersteller spezielle Dispersionsleime an. Eine Typenliste stellen wir Ihnen auf Anfrage gerne zur Verfügung.
Lösungsmittelhaltige Kontaktkleber dürfen generell nicht eingesetzt werden!
Bei besonderen Anforderungen, wie z. B. bei Küchenarbeitsplatten (Wasserfestigkeit und Wärmeformbeständigkeit), sind vor-zugsweise PUR-Klebestoffe einzusetzen oder Systeme, die ein ähnliches Eigenschaftsprofil aufweisen. Grundsätzlich ist bei der manuellen Verarbeitung zu empfehlen, die Spanplatte im Bereich der Klebefuge abzukleben, um Verschmutzungen durch einen Klebstoffüberschuss zu verhindern.
Materialerwärmung für RadienbereicheDie zu verformenden Bereiche werden mit Heißluft oder Infrarotstrahlern erwärmt und vorsichtig in den thermoelastischen Bereich gebracht (100 – 120 °C). Anschließend wird die durchweichte Kante mit einem Druckholz an die Plattengeometrie angepasst und mit einer Schablone fixiert. Dabei ist zu beachten, dass das Material nicht verstreckt wird. Bis zum Erkalten muss die Kante in der Form gehalten werden. Nach dem vollständigen Abkühlen kann wie gewohnt verklebt werden (Presszeit nach Angabe des Klebstoffherstellers). Diese Vorgehensweise ist anwendbar sowohl für das BAZ-Material als auch für das Standardmaterial.
Die Bearbeitung der überstehenden Kanten erfolgt beispielsweise mittels einer Handoberfräse. Aus Gründen der Standzeit sollte mit Diamantwerkzeugen oder Hartmetallschneiden gearbeitet werden. Bei auftretenden Schmiereffekten ist in den meisten Fällen eine Anpassung der Drehzahl erforderlich oder aber ggf. eine Änderung des Drehsinns des Fräswerkzeuges notwendig. Beste Resultate werden i. d. R. im Gegenlauf erzielt.
Verarbeitungsanleitung 3D-Kanten | Instructions 3D Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
292 293
Nach der Fräsbearbeitung verbliebene Rattermarken können mit Schleifpapier oder Schleifschwämmen (240er bis 400er Körnung) entfernt bzw. geebnet werden. Für erstklassige Ergebnisse kann der Werkstoff anschließend mit einer Schwabbelscheibe und, wenn wünschenswert, unter Zuhilfenahme von Poliermittel bearbeitet werden. Dadurch lässt sich sehr leicht ein gewünschter Glanzgrad sowohl an der bearbeiteten Fräskante als auch auf der Frontfläche einstellen.
5. Manual processing
Döllken 3D Edgebands may also easily be applied manually, at room temperature. Gluing jigs or edgeband clamps would be useful accessories. Adhesive manufacturers can offer special dispersion glues for application without any aids. We will gladly provide a list of suitable types on request.
No contact adhesives containing solvents should in principle be used!
PUR7 adhesives or systems with similar characteristics are preferred for special requirements such as kitchen worktops (waterproof and resistant to warping under heat). Chipboards should be masked at the joint during manual application, to prevent staining due to excess glue.
Warming the material at radiiThe areas to form should be carefully heated to thermoelastic temperatures (100 – 120 °C), using hot air or infrared heaters. The softened edgeband should then be moulded using a wooden block to match the shape of the board and fixated using a jig. Be careful not to excessively stretch the material. The edgeband must be clamped in its shape until it cools down. Once fully cooled down, it may be glued as usual (press-on time according to adhesive manufacturer’s instructions). This method applies to both BAZ and standard material.
The edgeband overhang may be trimmed using a manual router, for instance. For high durability, diamond-tipped or carbide cutters are recommended. Should smearing occur, the speed of rotation often requires adjusting or the direction of rotation of the router may need to change. Best results are generally achieved by cutting against the feed.
Any chatter marks remaining after milling can be removed or smoothed out with emery paper or abrasive sponge (240 to 400 grain). Top results may be achieved by buffing the material with a buffing wheel and also using polishing agents as required. This facilitates creating the desired level of gloss both on the milled edge and on the face.
6. Mechanische Eigenschaften
AbriebfestigkeitDadurch, dass die Dekore auf der Rückseite der Döllken 3D-Kanten aufgebracht werden, sind sie auch gegen jegliche äußeren mechanischen Beanspruchungen (wie Abrieb- und Kratzbeanspruchungen) geschützt.
Kugeldruckhärte/Shorehärte DNach DIN EN ISO 2039-1 bzw. DIN EN ISO 868 erreichen die Döllken 3D-Kanten auch bei der Oberflächenhärte sehr gute Ergebnisse. Oberflächliche Beschädigungen auf dem Trägermaterial (wie Kratzer oder Abrieb) können problemlos poliert werden.
WärmeformbeständigkeitMit einem Wert von 90 (± 3) °C (nach DIN EN ISO 306) sind Döllken 3D-Kanten für den Einsatz in der Möbelindustrie und im lnnenausbau hervorragend geeignet.
6. Mechanical characteristics
Resistance to abrasionBecause the surface prints are applied to the back of the Döllken 3D Edgebands, they will be protected against external me-chanical stress (such as abrasion and scratches).
Ball indentation hardness/Shore hardness DDöllken 3D Edgebands achieve excellent surface hardness pursuant to DIN EN ISO 2039-1 or DIN EN ISO 868.Surface damage to the base material (such as scratches or abrasion) may simply be polished away.
Resistance to warpage under heatSporting a value of 90 (± 3) °C (pursuant to DIN EN ISO 306), Döllken 3D Edgebands are superbly suited to applications in the furniture industry and interior finishes.
7. Lichtechtheit
Döllken 3D-Kanten werden in einem speziellen Verfahren im Döllken-Labor ständig hinsichtlich ihrer Lichtechtheit geprüft. Die Lichtbeständigkeit der Döllken 3D-Kanten wurde mit hervorragend bis vorzüglich bewertet. Dies entspricht einem Wert von 7 bis 8 gemäß Wollfarbskala.
7. Lightfastness
The Döllken laboratory uses a special method for regular tests on Döllken 3D Edgebands for lightfastness. The lightfastness of Döllken 3D Edgebands was rated as excellent to outstanding. This corresponds to a value of 7 to 8 on the wool colour scale.
8. Oberflächengüte
Seidenglänzend bis hochglänzend. Erzielbar durch Polieren mittels weichen Schwabbelscheiben aus Baumwolle oder ähnlichen Stoffen. Eine Zugabe von Acryl geeigneten Poliersubstanzen ist ebenfalls problemlos möglich. Die Premium-Varianten können durch Abschluss-Lack eine matte bis hochglänzende Oberfläche erhalten.
8. Surface quality
Silk gloss to high gloss. Achieved by buffing with soft buffing wheels made of cotton or similar material. Polishing agents sui-table for acrylic may also be used without a problem. By applying finishing varnish, premium type surfaces may be rendered matt to high gloss.
9. Reinigung
Für die Reinigung der Döllken 3D-Kanten empfiehlt sich die Verwendung einfacher Seifenlaugen oder spezieller Reiniger, die für eine Reinigung von Acrylwerkstoffen explizit geeignet sind.
Lösungsmittelhaltige oder alkoholische Substanzen dürfen generell nicht eingesetzt werden!
Verarbeitungsanleitung 3D-Kanten | Instructions 3D Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
294 295
9. Cleaning
Döllken 3D Edgebands may be cleaned using ordinary soapy water or special cleaners specifically formulated for cleaning of acrylic materials.
Never use substances containing solvents or alcohol!
10. Entsorgung
Döllken 3D-Kantenreste können zusammen mit anderen Späneresten verbrannt werden. Es entstehen keine Chlorverbindungen. Sonstige Grenzwerte aus der TA-Luft sind bei einer Verbrennung zu beachten.
10. Disposal
Döllken 3D Edgeband material may be incinerated together with wood shavings. No chlorine compounds are generated. Other TA-Luft [Technical Guidelines on Air Quality] limits should be observed during incineration.
11. Qualität/Toleranzen
Für eine gleichbleibend hohe Qualität der Döllken 3D-Kanten und der Döllken 3D-BAZ-Kanten sorgen umfangreiche Qualitäts-sicherungsmaßnahmen, wie die ständige Verbesserung der Rohstoffeigenschaften im eigenen Technikum. Die Fertigungstoleranzen der 3D-Kantenbandproduktion sind eng definiert und werden bei jeder Fertigung regelmäßig überprüft.
a. Breiten-Toleranzen
Breite ABS-Kanten
0 – 30 mm ± 0,5 mm
> 30 mm ± 0,5 mm
b. Stärken-Toleranzen
Stärke ABS-Kanten
0 – 1,0 mm+ 0,10 mm
– 0,15 mm
1,1 – 2,0 mm+ 0,15 mm
– 0,25 mm
2,1 – 4,0 mm+ 0,20 mm
– 0,30 mm
c. Vorspannungs-Toleranzen
StärkeBreitebis 30 mm
Breiteab 30 mm
0 – 1,0 mm 0,20 – 0,50 mm 0,30 – 0,70 mm
1,1 – 2,0 mm 0,10 – 0,30 mm 0,15 – 0,35 mm
2,1 – 4,0 mm 0,10 – 0,20 mm 0,10 – 0,30 mm
d. Planparallelität
Stärke Maximale Abweichung
0 – 1,0 mm max. 0,10 mm
1,1 – 2,0 mm max. 0,10 mm
2,1 – 4,0 mm max. 0,15 mm
e. LängsverzugAuf 1 m Länge max. 3 mm Verzug.
11. Quality/Tolerances
The consistently high quality of Döllken 3D Edgebands and Döllken 3D-BAZ edgebands is ensured through comprehensive quality assurance measures such as ongoing improvement of raw material properties by our own Technical Department. The manufacturing tolerances for 3D Edgebands are closely defined and regularly checked for each manufacturing run.
a. Width tolerances
Width 3D Edgebands
0 – 30 mm ± 0.5 mm
> 30 mm ± 0.5 mm
b. Thickness tolerances
Thickness 3D Edgebands
0 – 1.0 mm+ 0.10 mm
– 0.15 mm
1.1 – 2.0 mm+ 0.15 mm
– 0.25 mm
2.1 – 4.0 mm+ 0.20 mm
– 0.30 mm
c. Pretensioning tolerances
ThicknessWidthto 30 mm
Widthfrom 30 mm
0 – 1.0 mm 0.20 – 0.50 mm 0.30 – 0.70 mm
1.1 – 2.0 mm 0.10 – 0.30 mm 0.15 – 0.35 mm
2.1 – 4.0 mm 0.10 – 0.20 mm 0.10 – 0.30 mm
d. Plane parallelity
Thickness Meximum deviation
0 – 1.0 mm max. 0.10 mm
1.1 – 2.0 mm max. 0.10 mm
2.1 – 4.0 mm max. 0.15 mm
e. Longitudinal warpageMax. 3 mm warpage per 1 m length.
Verarbeitungsanleitung 3D-Kanten | Instructions 3D Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
296 297
1. Die Besonderheiten von Döllken PP-Kanten
Döllken PP-Kanten werden im Extrusionsverfahren hergestellt und sind vollständig und gleichmäßig durchgefärbt. Die schlag-feste Materialeinstellung des Döllken PP garantiert eine problemlose Verarbeitung. Döllken PP-Kanten sind rückseitig mit einem Universalhaftvermittler beschichtet, der eine einwandfreie Haftung der Kante am Trägermaterial in Verbindung mit allen gängigen und geeigneten Heißschmelzklebern erlaubt.
1. Special features of Döllken PP Edgebands
Döllken PP Edgebands are extruded and therefore fully solid-coloured. Impact resistant Döllken-PP material formulations guarantee hassle-free application. Döllken PP Edgebands are coated on the back with universal primers for perfect adhesion, in conjunction with all conventional and suitable hot melt adhesives, of the edgeband to the base material.
2. Werkstoffcharakteristiken PP
PP steht für Polypropylen und ist ein teilkristalliner Kunststoff, der vorwiegend in der Rohrextrusion und der Verpackungs-industrie eingesetzt wird. Seit ca. 10 Jahren kommt dieser chlorfreie Werkstoff auch in der Möbelindustrie als Alternative zu den bewährten Werkstoffen PVC und ABS zur Anwendung. Polypropylen überzeugt insbesondere durch seine problemlose Entsorgung, erfordert jedoch eine optimale Maschineneinstellung bei der Verarbeitung.
2. Material characteristics PP
PP stands for polypropylene, a semi-crystalline plastic used primarily in pipe extrusion and the packing industry. This chlori-ne-free material has for the past ten years also been popular in the furniture industry, as an alternative to the proven materials of PVC and ABS. One advantage of polypropylene is that disposal is simple, but processing does require optimised machine settings.
3. Einsatzgebiete der Döllken PP-Kanten
Döllken PP-Kanten sind in vielen verschiedenen Bereichen einsetzbar: im Büro, im Bad, in der Küche, im Messe- und Laden-bau, im Wohnbereich und bei Objektausstattungen. Aufgrund der besonderen Lösungsmittelbeständigkeit werden Döllken PP-Kanten jedoch insbesondere im Laborbau eingesetzt. Döllken PP-Kanten lassen sich auf allen Kantenanleimmaschinen im Geradeauslauf oder auch auf BAZ an Innen- und Außenradien verarbeiten. Döllken PP-Kanten verfügen jedoch bereits in unverklebtem Zustand über sehr niedrige Werte im freien Schrumpf.
3. Applications for Döllken PP Edgebands
Döllken PP Edgebands may be used in many different applications: in offices, bathrooms and kitchens, in exhibition stands and for shop fittings, in the home and for interior furnishing. Due to their excellent resistance to solvents, Döllken PP Edgebands are particularly popular in laboratories. Döllken PP Edgebands may be processed on all straight-processing edgeband gluing machines or in machining centres and are suitable for inside or outside radii. Döllken PP Edgebands have very low “free shrinkage”, already before gluing.
4. Maschinelle Verarbeitung
Döllken PP-Kanten können auf allen Kantenanleimmaschinen (Geradeausverarbeitung und BAZ) mit Schmelzklebertechnik verarbeitet werden. Verleimen, Kappen, Fräsen, Bearbeitung mit der Ziehklinge sowie die Bearbeitung mit Schwabbelscheiben oder Kugeldruckaggregaten für eine hochwertige Oberfläche sind problemlos möglich. Für eine saubere und dauerhafte Kantenbeschichtung müssen einige zentrale Verarbeitungsparameter beachtet werden, die zum Teil von den eingesetzten Materialien (Kanten, Klebstoff, Platten) von der Kantenanleimmaschine und von den Umgebungstemperaturen abhängig sind. Es empfiehlt sich daher, die jeweils optimalen Einstellungen durch Versuche zu bestimmen. Die von den Herstellern für den jeweiligen Einsatzzweck vorgegebenen Richtwerte sind hierbei zu beachten.
KlebstoffDöllken PP-Kanten können mit allen marktüblichen Heißschmelzklebern (z. B. EVA, PA, APAO, PUR) verarbeitet werden. Hoch wärmestandfeste Schmelzklebstoffe garantieren zusammen mit der schrumpfarmen Rohstoffrezeptur des Döllken-PP auch bei dickeren Kanten eine sichere Verklebung. Besonders wärmestandfeste Kleber werden empfohlen bei hohen Anwendungs- temperaturen, z. B. im Herdbereich der Küche bzw. beim Möbelexport in Containern.
Positiv ist hier auch die Wärmeformbeständigkeit von PP-Kanten. Eine Materialerweichung tritt erst ab 90 °C (Vicat B50) auf. Bei der Verklebung muss darauf geachtet werden, dass stets eine ausreichende Klebermenge im Behälter verfügbar ist, um eine gleichbleibende Temperatur beim Klebstoffauftrag zu gewährleisten. Die Viskosität und der Anpressdruck müssen so eingestellt sein, dass der Leim auf der Klebefläche gleichmäßig verpresst wird.
Die Verarbeitungstemperatur des Heißschmelzklebers variiert je nach Schmelzklebstofftyp zwischen 90 und 220 °C. Bitte be- achten Sie, dass die Thermostate für die Temperaturmessung im Schmelzbehälter oft ungenau arbeiten können und deutlich von der tatsächlichen Temperatur an der Andruckwalze abweichen können. Es empfiehlt sich, die Temperatur an der Schmelz- klebstoffauftragswalze zu messen. Eine Verklebung von Döllken PP-Kanten im KA-Verfahren mit Weißleim ist nicht möglich.
VerarbeitungstemperaturFür bestmögliche Ergebnisse bei der Kantenbeschichtung sollten Platten und Kanten bei Raumtemperatur verarbeitet werden (nicht unter 18 °C). Im Falle der Außenlagerung sollte das Material über Nacht aufgewärmt werden. Bei zu niedrigen Temperaturen bindet der aufgetragene Schmelzkleber noch vor Aufbringung des Kantenbandes ab. Daher sollte auch Zugluft vermieden werden.
HolzfeuchtigkeitDie optimale Holzfeuchtigkeit des Plattenmaterials für die Weiterverarbeitung liegt zwischen 7 und 10 %.
VorschubgeschwindigkeitDie besondere Rohstoffrezeptur der Döllken PP-Kanten ist auf die Vorschubgeschwindigkeit sowohl beim kleinen Verarbeiter als auch in der Großindustrie abgestimmt. Geschwindigkeiten von 10 bis 100 m/min. sind in Abhängigkeit der Kantenband- Anleimmaschine möglich. Auf modernen Portal-Bearbeitungszentren sind Geschwindigkeiten von 30 m/min. in Abhängigkeit der Geometrie machbar.
LeimauftragsmengenBitte beachten Sie die Angaben der Klebstoffhersteller. Der Klebstoffauftrag sollte gleichmäßig und so reichlich bemessen sein, dass an den Rändern der frisch verklebten Kante kleine Perlen herausgedrückt werden und die Hohlräume zwischen den Spänen ausgefüllt sind. Die jeweilige Leimauftragsmenge ist abhängig von der Spanplattendichte und dem Klebstofftyp.
AndruckrollenAchten Sie unter Berücksichtigung der Maschinengegebenheiten auf die richtige Anzahl und auf die Andruckeinstellung, um das bestmögliche Fugenbild zu erhalten.
AbsaugungThermoplastkanten benötigen eine stärkere Absaugung (ca. 2,5 m3/s) als Duroplastkanten, je nach Ausführung und Art der Maschine. PP-Späne neigen beim Fräsen zu einer hohen elektrostatischen Aufladung. Hinsichtlich der besseren Späneabfuhr empfiehlt sich in solchen Fällen der Einsatz von Werkzeugen mit Innenabsaugung.
Verarbeitungsanleitung PP-Kanten | Instructions PP Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
298 299
FräsenDöllken PP-Kanten müssen auf der Kantenband-Anleimmaschine im Gegenlauf gefräst werden. Verwenden Sie möglichst 3-6-schneidige Fräser, wobei die Drehzahlen zwischen 12 und 18.000 U/min. liegen sollten. Falsche Drehzahlen oder stumpfe Werkzeuge können die Kanten beschädigen. Bei eventuell auftretenden Schmiereffekten ist die Drehzahl des Fräsers zu reduzieren bzw. sind Fräsen mit größerem Achswinkel vorzusehen. Des Weiteren lässt sich durch Erhöhen des Vorschubes ein besseres Ergebnis erzielen.
ZiehklingenbearbeitungDa der Werkstoff PP zum leichten Aufhellen nach der Ziehklingenbearbeitung neigt, sollte der Ziehklingenspan maximal 0,1 bis 0,2 mm betragen. Die hierfür erforderliche, möglichst rattermarkenfreie Fräsung wird durch Fräswerkzeuge mit hoher Rundl-aufgenauigkeit gewährleistet. Der Einsatz von DIA-Werkzeugen ist hilfreich. Bei kritischen Farben kann unter Umständen der Einsatz von Nachbearbeitungsaggregaten (z. B. Kugeldruckaggregate) notwendig werden. Bitte fragen Sie Ihren Maschinen-hersteller.
Schwabbeln/PolierenPP-Kanten lassen sich aufgrund der Werkstoffeigenschaften nur bedingt polieren. Im Durchlauf können die Leimreste mit Hilfe der Schwabbelscheibe entfernt werden. Darüber hinaus können Leimreste ebenfalls mit elektronisch gesteuerten Trennmittel-Sprüh- aggregaten, die in der Industrie standardmäßig eingesetzt werden, entfernt werden. Gleichzeitig wird hierdurch auch die Zieh- klingenspanabnahme verbessert. Es empfiehlt sich, die Umdrehungsgeschwindigkeit um ca. 50 % auf 1.400 U/min. zu reduzieren. Ferner sollte der Anpressdruck auf die Kantenbandoberfläche der Döllken PP-Kante nicht zu hoch gewählt werden. Hierdurch werden unnötiges Schmieren und eine zu große Wärmeentwicklung vermieden. Die Stellung der Schwabbelscheibe sollte in beiden Achsen in einem leichten Winkel zur Kantenbandoberfläche stehen.
Grundsätzliche Voraussetzung für die Verarbeitung von PP Fräsung im Gegenlauf Reduzierung der Drehzahl der Schwabbelscheiben Optimale Ziehklingen-Einstellung
Wenn alle Verarbeitungsparameter optimal beachtet werden, so lassen sich Döllken PP-Kanten nachbearbeitungsfrei in der Möbelindustrie einsetzen. Anschließend lassen sich auch alle anderen alternativen thermoplastischen Kantenbandwerkstoffe wie Döllken-PVC, Döllken-ABS oder Döllken-3D-Kanten ohne Maschinenkorrektur verarbeiten.
4. Processing by machine
Using hot melt adhesive techniques, Döllken PP Edgebands may be processed on all edgeband gluing machines (stra-ight-processing and machining centres). Gluing, cross-cutting, milling, scraping and buffing with buffing wheels or processing with ball indentation units for a high quality surface finish poses no problem. Certain central processing parameters must be observed to ensure clean and durable edgeband finishing; this may in part depend on materials used (edgebands, glue, boards), on the edgeband gluing machine and on ambient temperature. Trials to determine relevant optimal settings are therefore recommended. Manufacturers’ guidelines for an intended application should also be taken into account.
AdhesivesDöllken PP Edgebands may be processed using any standard hot melt adhesives (e.g. EVA, PA, APAO, PUR). Together with the low-shrink Döllken PP raw material formulation, highly heat-resistant adhesives guarantee reliable bonding even for thicker edgebands. Particularly heat-resistant adhesives are recommended for applications exposed to high temperatures, e.g. in the vicinity of kitchen stoves or for furniture exported in containers.
The resistance of PP Edgebands to warping under heat is also excellent. The material will only soften at temperatures above 90 °C (Vicat B50). When gluing, ensure that sufficient glue will always be available in the hopper, in order to maintain a constant temperature during application. Viscosity and exerted pressure must be adjusted to ensure that the glue is uniformly distributed over the glued surface.
The hot melt adhesive application temperature may vary between 90 and 220 °C, depending on the type of adhesive. Please note that the thermostats for reading the temperature in the hot melt hopper may often be inaccurate and may vary considerably from the actual temperature on the pressure roller. It is advisable to measure the temperature on the hot melt adhesive appli-cation roller. Döllken PP Edgebands cannot be glued using PVAC glue and the cold activation method.
Application temperatureFor best results when applying edgebands, work with boards and edgebands at room temperature (not below 18 °C). Material stored outdoors should be warmed up overnight. If temperatures are too low, the hot melt adhesive will set before the edgeband is in place. Draughts should for this reason also be avoided.
Wood moistureThe optimal moisture content of the boards should be between 7 and 10 % for further processing.
Feed rateThe special raw material formulation of Döllken PP Edgebands is designed for feed rates found in both low and high volume processing. Speeds of 10 to 100 m/min. are possible, depending on the edgeband gluing machine. On modern portal-type machining centres, speeds of 30 m/min. are feasible, depending on profile shape.
Rates of adhesive applicationPlease follow the adhesive manufacturer’s instructions. Apply the adhesive evenly and in sufficient quantities for beads of adhesive to be pressed out along the edges of the freshly glued edgebands, ensuring that the spaces between chips will be filled. The amount of glue required depends on the density of the chipboard and the type of adhesive.
Press rollersBearing in mind the machine parameters, ensure that an adequate number of rollers are available and adjust the pressure to achieve the best possible appearance of the joint.
ExtractionThermoplastic edgebands require higher extraction power (ca. 2.5 m3/s) than duroplastic edgebands, depending on design and type of machine. PP chips tend to collect high electrostatic charge during milling. The use of tools with internal extraction is recommended for better extraction of shavings.
MillingDöllken PP Edgebands must be milled against the feed on edgeband gluing machines.If possible, use cutters with 3 to 6 teeth, rotating at speeds between 12 000 and 18 000 rpm. Incorrect speeds or blunt cutters may damage the edgebands. If smearing should occur, reduce the cutter speed or use routers with a larger shaft angle. Increasing the feed rate may also improve the result.
ScrapingBecause the PP material tends to fade slightly after scraping, the thickness of the plastic shavings should not exceed 0.1 to 0.2 mm. To avoid chatter marks, the routers used for milling should be running absolutely true Diamond coated cutters are recommended. Where the colour quality is critical, post-processing may be necessary (e.g. using ball indentation machines). Please consult your machine manufacturer here.
Buffing/polishingTheir material properties allow only conditional polishing of PP Edgebands. Adhesive residuals after through-feed processing may be removed with a buffing wheel. Glue remnants may also be removed using electronically controlled release agent spraying units as is common in industry. This improves the scraper blade finish as well. It is recommended that the rotational speed be reduced by ca. 50 %, to 1 400 rpm. The pressure brought to bear on the Döllken PP Edgeband surface should furthermore not be too high. This will prevent unnecessary smearing and excessive heat generation. The buffing wheel should be set at a slight angle to the edgeband surface along both axes.
Verarbeitungsanleitung PP-Kanten | Instructions PP Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
300 301
Basic prerequisite to processing of PP Milling against the feed Reducing buffing wheel speed Optimal scraper setting
With all the processing parameters optimised, Döllken PP Edgebands may be used in the furniture industry without the need for post-processing. All other alternative thermoplastic edgeband materials such as Döllken PVC, Döllken ABS or Döllken 3D Edgebands may thereafter also be processed without resetting the machines.
5. Manuelle Verarbeitung
Die manuelle Verarbeitung von Döllken PP-Kanten ist ebenfalls problemlos möglich, z. B. mittels eines Verleimständers oder einer Kantenpresse. Als Kleber empfehlen sich hier spezielle Lackleime, Kontaktkleber oder PU-Klebstoffe. Eine Typenliste stellen wir Ihnen gerne auf Anfrage zur Verfügung. Bitte informieren Sie sich direkt bei Ihrem Kleberhersteller. Eine Verklebung mit Weißleimen ist nicht möglich. Die Verklebung sollte bei Raumtemperatur erfolgen. Beim Einsatz von Kontaktklebern ist zu berücksichtigen, dass nach dem Kleberauftrag auf Platte und Kante die Ablüftzeit eingehalten werden muss, um eine optimale Kantenverklebung sicherzustellen. Anschließend wird die Kante angeklopft.
Beim Einsatz von Dispersionsklebern muss auf die Heizschienen verzichtet werden. Nach dem Aushärten (je nach Kleber bis zu 6 Stunden) kann mit der Weiterverarbeitung begonnen werden. PP-Kanten neigen stärker zum Schmieren bei der Bearbeitung von Hand und zeigen somit ein eingeschränktes Verarbeitungsfenster.
5. Manual processing
Döllken PP Edgebands may also be applied manually using a gluing jig or edgeband press, for instance. Recommended ad-hesives include special lacquer adhesives, contact adhesives or PU adhesives. We will gladly provide you with a list of adhesives on request. For further information, please contact your adhesives manufacturer directly. PVAC glues cannot be used for gluing. Gluing should be carried out at room temperature. For optimal edgeband bonding using contact adhesives, ensure that the curing time after applying adhesive to edgeband and board is observed. This is followed by tapping on the edgeband.
Heating tracks are not used with dispersion adhesives. Continue with further processing after curing (up to 6 hours, depen-ding on the adhesive). PP Edgebands are more likely to smear when processed manually and thus also have a limited scope for processing.
6. Mechanische Eigenschaften
AbriebfestigkeitDie Oberfläche von bedruckten Döllken PP-Kanten wird mit UV-gehärtetem Acryllack kratzfest versiegelt. Die Druckbilder weisen zudem eine hervorragende Kratz- und Abriebfestigkeit auf.
Shore-Härte D/KugeldruckhärteDöllken PP-Kanten erzielen mit einer Shore-Härte gemäß DIN EN ISO 868 gute Ergebnisse. Die Kugeldruckhärte nach DIN EN ISO 2039-1 liegt leicht unterhalb übriger thermoplastischer Kantenwerkstoffe. Zur Vermeidung von Kratzern und Andruckstreifen auf der Kantenoberfläche empfehlen wir den Einsatz von geprägten Oberflächen. Darüber hinaus ist eine Abschlusslackierung gegen Aufpreis möglich.
WärmeformbeständigkeitMit einem Wert von 90 (± 5) °C sind Döllken PP-Kanten für den Einsatz in der Möbelindustrie sehr gut geeignet. Die Messungen erfolgen nach Vicat B 50. Ferner zeigt das geringe Schrumpfvermögen der Döllken PP-Kanten positiven Einfluss auf das Möbel- teil unter Temperatureinfluss.
LackierungDöllken PP-Kanten sind nur mit Speziallacken oder nach vorherigem Aufbringen eines Spezial-Primers auf die Kante zu lackieren. Für ein gutes Lackierergebnis muss bei der Primeraufbringung das Plattenmaterial exakt abgeklebt werden, um hier Zerstörungen im Oberflächenbild zu vermeiden. Für die optimale Haftung des Lacks muss auch im angefrästen Radius der Primer gleich-mäßig aufgetragen werden. Lacke für diesen Einsatzzweck erhalten Sie von Ihrem Lacklieferanten. Des Weiteren können wir Ihnen auch auf Anfrage eine Typenliste zur Verfügung stellen.
6. Mechanical characteristics
Resistance to abrasionThe surface of printed Döllken PP Edgebands is sealed with UV-hardened acrylic varnish for a scratch-resistant finish. The printed patterns also have excellent resistance to scratching and abrasion.
Shore hardness D/Ball indentation hardnessDöllken PP Edgebands score good results for shore hardness to DIN EN ISO 868. Ball indentation hardness to DIN EN ISO 2039-1 is slightly below that of other thermoplastic edgeband materials. We recommend using embossed surfaces to prevent scratches and pressure lines on the edgeband surface. Final varnishing is also possible at a surcharge.
Resistance to warp under heatWith a thermal withstand value of 90 (± 5) °C, Döllken PP Edgebands are ideally suited for use in the furniture industry. The results are based on Vicat B 50. The low shrinkage capacity of Döllken PP Edgebands have a positive effect when furniture is subjected to high temperatures.
VarnishingDöllken PP Edgebands should only be varnished with special varnishes or after applying special primer to the edgeband. To achieve a good result with varnishing, the board must be accurately masked when applying the primer, to avoid damaging the surface pattern. For optimal adhesion of the varnish, apply the primer evenly in milled radii as well. Varnishes for this application will be available from your varnish supplier. We can also provide a list of suitable types, on request.
7. Lichtechtheit
Döllken PP-Kanten unterliegen einer ständigen Prüfung im Döllken Technikum hinsichtlich ihrer Lichtechtheit. Mit einer Licht-beständigkeit von 7 – 8 nach Wollfarbskala sind Döllken PP-Kanten für den Inneneinsatz sehr gut geeignet.
7. Lightfastness
The Döllken Technical Department regularly tests Döllken PP Edgebands for lightfastness. With a lightfastness of 7 – 8 on the wool colour scale, Döllken PP Edgebands are ideal for interior use.
Verarbeitungsanleitung PP-Kanten | Instructions PP Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
302 303
8. Entsorgung
Reste der Döllken PP-Kanten können zusammen mit den Späneresten in den dafür genehmigten Anlagen problemlos verbrannt werden. Die Grenzwerte der strengen TA-Luft werden eingehalten. Auch Spanplatten mit angefahrenen Döllken PP-Kanten können so problemlos von Ihrem Spanplattenhersteller entsorgt werden. Ein mühsames Sortieren der Abfälle bzw. die Trennung von Kante und Platte entfällt.
8. Disposal
Döllken PP Edgeband remnants may be incinerated together with wood shavings without a problem in relevantly approved plant. The stringent TA-Luft [Technical Guidelines on Air Quality] limits are complied with. Chipboard with Döllken PP Edge-bands may also be easily disposed of by your chipboard manufacturer. There is no need for time-consuming sorting of waste or separation of edgebands from boards.
9. Qualität und Toleranzen
Für eine gleichbleibend hohe Qualität der Döllken PP-Kanten sorgen umfangreiche Qualitätssicherungsmaßnahmen wie die ständige Verbesserung der Rohstoffeigenschaften im eigenen Technikum. Fertigungstoleranzen für Kantenbänder sind eng definiert und werden bei jeder Fertigung regelmäßig überprüft.
a. Breiten-Toleranzen
Breite PVC-Kanten
0 – 30 mm ± 0,5 mm
> 30 mm ± 0,5 mm
b. Stärken-Toleranzen
Stärke PVC-Kanten
0 – 1,0 mm+ 0,10 mm
– 0,15 mm
1,1 – 2,0 mm+ 0,15 mm
– 0,25 mm
2,1 – 4,0 mm+ 0,20 mm
– 0,30 mm
c. Vorspannungs-Toleranzen
StärkeBreitebis 30 mm
Breiteab 30 mm
0 – 1,0 mm 0,20 – 0,50 mm 0,30 – 0,70 mm
1,1 – 2,0 mm 0,10 – 0,30 mm 0,15 – 0,35 mm
2,1 – 4,0 mm 0,10 – 0,20 mm 0,10 – 0,30 mm
d. Planparallelität
Stärke Maximale Abweichung
0 – 1,0 mm max. 0,10 mm
1,1 – 2,0 mm max. 0,10 mm
2,1 – 4,0 mm max. 0,15 mm
> 4,0 mm max. 0,20 mm
e. LängsverzugAuf 1 m Länge max. 3 mm Verzug.
9. Quality/Tolerances
The consistently high quality of Döllken PP Edgebands is assured through comprehensive quality assurance measures such as ongoing improvements to raw material properties by our Technical Department. Manufacturing tolerances for edgebands are tightly defined and are regularly checked during each manufacturing run.
a. Width tolerances
Width PP Edgebands
0 – 30 mm ± 0.5 mm
> 30 mm ± 0.5 mm
b. Thickness tolerances
Thickness PP Edgebands
0 – 1.0 mm+ 0.10 mm
– 0.15 mm
1.1 – 2.0 mm+ 0.15 mm
– 0.25 mm
2.1 – 4.0 mm+ 0.20 mm
– 0.30 mm
c. Pretensioning tolerances
ThicknessWidthto 30 mm
Widthfrom 30 mm
0 – 1.0 mm 0.20 – 0.50 mm 0.30 – 0.70 mm
1.1 – 2.0 mm 0.10 – 0.30 mm 0.15 – 0.35 mm
2.1 – 4.0 mm 0.10 – 0.20 mm 0.10 – 0.30 mm
d. Plane parallelism
Thickness Maximum deviation
0 – 1.0 mm max. 0.10 mm
1.1 – 2.0 mm max. 0.10 mm
2.1 – 4.0 mm max. 0.15 mm
> 4.0 mm max. 0.20 mm
e. Longitudinal warpageMax. 3 mm warpage per 1 m length.
Verarbeitungsanleitung PP-Kanten | Instructions PP Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
304 305
1. Die Besonderheiten von PVC-Kanten
Döllken PVC-Kanten werden im Extrusionsverfahren hergestellt und sind vollständig durchgefärbt. Die gleichmäßige Durch-färbung des Materials erlaubt eine saubere und problemlose Kantenverrundung. Die schlagfeste Materialeinstellung des Döllken PVC garantiert hohe Standzeiten für Fräs- und andere Schneidwerkzeuge. Döllken PVC-Kanten sind rückseitig mit einem Universal-Haftvermittler beschichtet, der eine einwandfreie Haftung der Kante am Trägermaterial in Verbindung mit allen geeigneten Heißschmelzklebern, aber auch Lösemittelklebern, erlaubt.
1. Special features of PVC Edgebands
Döllken PVC Edgebands are extruded and fully solid-coloured. Solid-colouring of the material enables clean and simple rounding of edges. The impact resistant formulation of Döllken PVC material guarantees a long service life of milling and other cutting tools. Döllken PVC Edgebands are coated on the back with a universal bonding agent for perfect adhesion, together with all suitable hot melt glues or solvent-based adhesives, to substrates.
2. Werkstoffcharakteristiken PVC
PVC (Polyvinylchlorid) gehört heute zu den bekanntesten und am meisten verbreiteten Kunststoffen. Seit mehr als 40 Jahren werden auch Kantenbänder für die Möbelindustrie aus diesem Werkstoff hergestellt und haben sich aufgrund der hervorragenden Materialeigenschaften bewährt. Insbesondere sind es die sehr guten Anwendungsverarbeitungseigenschaften des PVC, die zu seiner Marktdurchdringung in der Möbelherstellung beigetragen haben.
2. Material characteristics of PVC
PVC (polyvinyl chloride) is one of todays best known and most common plastics. Edgebands have been manufactured from this material for the furniture industry also for more than 40 years and have, due to their outstanding materials properties, proven very successful. Especially the excellent processing characteristics of PVC have contributed to its penetration of the furniture manufacturing market.
3. Einsatzgebiete der Döllken PVC-Kanten
Das Spektrum der Einsatzgebiete der Döllken PVC-Kanten ist nahezu unbegrenzt: vom Büro über Bad und Küche, den Messe- und Ladenbau, den Wohnbereich bis hin zu Objektausstattungen. Die besonders verarbeitungsfreundliche Rohstoffrezeptur des Döllken PVC ermöglicht neben der Geradeausverarbeitung ebenfalls einen problemlosen Einsatz an allen geschwungenen Möbelgeometrien, unabhängig davon, ob Innen- oder Außenradien erforderlich sind.
3. Applications for Döllken PVC Edgebands
The scope for application of Döllken PVC Edgebands is virtually unlimited: from office via bathroom and kitchen, via exhibition stands and shopfitting, in the home and up to general interior furnishing. The Döllken PVC raw material formulation is parti-cularly application friendly and, in addition to straight-line processing, also enables simple application to all curved furniture components, irrespective whether inside or outside radii are required.
4. Maschinelle Verarbeitung
Döllken PVC-Kanten können auf allen Kantenanleimmaschinen (Geradeausverarbeitung und BAZ) mit Schmelzklebertechnik verarbeitet werden. Verleimen, Kappen, Fräsen, Bearbeitung mit der Ziehklinge sowie die nachträgliche Bearbeitung mit Polier- scheiben und Heißluftdusche für hochwertige Oberflächen sind problemlos möglich. Für eine saubere und dauerhafte Kanten- beschichtung müssen einige zentrale Verarbeitungsparameter beachtet werden, die z. T. von den eingesetzten Materialien (Kanten, Klebstoff, Platten), von der Kantenanleimmaschine und von den Umgebungstemperaturen abhängig sind. Es empfiehlt sich daher, die jeweils optimalen Einstellungen durch Versuche zu bestimmen. Die von den Herstellern für den jeweiligen Einsatz- zweck vorgegebenen Richtwerte sind hierbei zu beachten.
KlebstoffDöllken PVC-Kanten können mit allen marktüblichen Heißschmelzklebern (EVA, PA, APAO, PUR) verarbeitet werden. Hoch-wärmestandfeste Kleber garantieren zusammen mit der schrumpfarmen Rohstoffrezeptur des Döllken PVC auch bei Kanten über 3 mm Stärke eine sichere Verklebung. Besonders wärmestandfeste Kleber werden empfohlen bei hohen Anwendungs- temperaturen, z. B. im Herdbereich der Küche bzw. beim Möbelexport in Containern. Döllken PVC-Kanten verfügen jedoch bereits im unverklebten Zustand über sehr niedrige Werte im „freien Schrumpf“. Positiv ist hier auch die Formbeständigkeit von PVC-Kanten: Eine Materialerweichung tritt erst ab 80 (± 2) °C (Vicat B 50) auf. Bei der Verklebung muss darauf geachtet werden, dass stets eine ausreichende Klebermenge im Behälter verfügbar ist, um eine gleichbleibende Temperatur beim Klebstoffauftrag zu gewährleisten. Die Verarbeitungstemperatur des Klebers variiert je nach Klebstofftyp zwischen 90 und 220 °C. Beachten Sie bitte, dass die Thermostate im Schmelzbehälter oft ungenau arbeiten und deutlich von der tatsächlichen Temperatur an der Auftragswalze abweichen können. Es empfiehlt sich, die Temperatur an der Auftragswalze zu messen. Eine Verklebung von Döllken PVC-Kanten im Kantenanleim-Verfahren mit Weißleim ist nicht möglich.
VerarbeitungstemperaturFür bestmögliche Ergebnisse bei der Kantenbeschichtung sollten Platten und Kanten bei Raumtemperatur verarbeitet werden (nicht unter 18 °C). Bei Außenlagerung sollte das Material über Nacht aufgewärmt werden. Bei zu kalten Platten oder Kanten bindet der aufgetragene Schmelzkleber noch vor Aufbringung des Kantenbandes ab. Aus diesem Grund sollte auch Zugluft vermieden werden.
HolzfeuchtigkeitDie optimale Holzfeuchtigkeit des Plattenmaterials für die Weiterverarbeitung liegt zwischen 7 und 10 %.
VorschubgeschwindigkeitDie besondere Rohstoffrezeptur der Döllken PVC-Kanten ist auf die Vorschubgeschwindigkeit sowohl beim Kleinverarbeiter als auch in der Großindustrie abgestimmt. Geschwindigkeiten von 10 bis zu 100 m/min. sind in Abhängigkeit der Kantenanleim-maschine möglich. Auch auf modernen Portalbearbeitungszentren sind Geschwindigkeiten von 30 m/min. in Abhängigkeit der Geometrie machbar.
LeimauftragsmengenBitte beachten Sie die Angaben der Kleberhersteller. Der Kleberauftrag soll gleichmäßig und so reichlich bemessen sein, dass an den Rändern der frisch verklebten Kante kleine Perlen herausgedrückt werden und die Hohlräume zwischen den Spänen ausgefüllt sind. Die jeweilige Leimauftragsmenge ist abhängig von der Spanplattendichte und dem Klebstofftyp.
AndruckrollenAchten Sie unter Berücksichtigung der Maschinengegebenheiten auf die richtige Anzahl und auf die Andruckeinstellung, um das bestmögliche Fugenbild zu erhalten.
AbsaugungThermoplastkanten benötigen eine stärkere Absaugung als Duroplastkanten. Vorteilhaft bei den Döllken PVC-Kanten ist die geringere statische Aufladung im Vergleich mit anderen thermoplastischen Rohstoffen.
Verarbeitungsanleitung PVC-Kanten | Instructions PVC Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
306 307
FräsenVerwenden Sie möglichst 3- bis 6-schneidige Fräser mit einem Durchmesser von ca. 70 mm und 12.000 bis 18.000 U/min. Falsche Drehzahlen oder stumpfe Werkzeuge können die Kanten beschädigen. Bei eventuell auftretendem Schmiereffekt ist die Drehzahl des Fräsers zu reduzieren bzw. muss im „Gegenlauf“ gefräst werden (ggf. Vorschub erhöhen).
ZiehklingenbearbeitungDa der Werkstoff PVC zum leichten Aufhellen nach der Ziehklingenbearbeitung neigt, sollte der Ziehklingenspan max. 0,1 – 0,2 mm betragen. Die hierfür erforderliche, möglichst rattermarkenfreie Fräsung wird durch Fräswerkzeuge mit hoher Rundlaufgenauigkeit gewährleistet. Der Einsatz von DIA-Werkzeugen ist hilfreich. Zur Optimierung der Ziehklingenbearbeitung, insbesondere bei kritischen Farben, können Heißluftaggregate eingesetzt werden.
SchwabbelnDöllken PVC-Kanten lassen sich mit der Schwabbelscheibe im Radius sehr gut bearbeiten. Die eventuell von der Ziehklingen- bearbeitung auftretenden Aufhellungen lassen sich mit Hilfe von Schwabbelscheiben einfach wegpolieren und die Farbe des Radius entspricht der Kantenbandoberfläche. Zusätzlich können bei Kantenband-Anleimmaschinen, welche im Durchlauf arbeiten, ebenfalls die Leimreste mit Hilfe der Schwabbelscheibe entfernt werden. Darüber hinaus können Leimreste ebenfalls mit elektronisch gesteuerten Trennmittel-Sprühaggregaten, die in der Industrie standardmäßig eingesetzt werden, entfernt werden. Gleichzeitig wird hierdurch auch die Ziehklingenspanabnahme verbessert.
4. Processing by machine
Döllken PVC Edgebands may be processed using hot melt adhesive techniques on all edgeband gluing machines (straight processing and machining centres). Gluing, cross-cutting, milling, scraping and subsequent buffing with polishing wheels and hot-air dryers for high quality surfaces poses no problem. To ensure clean and durable edgeband finishing, certain important processing parameters which may be dependent on materials used (edgebands, adhesive, boards), on the edgeband gluing machine and on ambient temperature, must be observed. Trials to determine relevant optimal settings are therefore recom-mended. Manufacturers’ guidelines for an intended application should also be taken into account.
AdhesivesDöllken PVC Edgebands may be processed using any standard hot melt adhesive (EVA, PA, APAO, PUR). Used in combinati-on with the low-shrink raw material formulation of Döllken PVC, highly heat-resistant adhesives can guarantee reliable bonding even on edgebands thicker than 3 mm. Particularly heat-resistant adhesives are recommended for applications exposed to high temperatures, e.g. in the vicinity of kitchen ovens or for furniture exported in containers. Döllken PVC Edgebands exhibit very low “free shrinkage” before gluing already. Another positive feature is the dimensional stability of PVC Edgebands: The material starts softening only after 80 (± 2) °C (Vicat B 50). Ensure that the container has sufficient glue in order to maintain a constant temperature during application. The glue application temperature will vary between 90 °C and 220 °C, depending on the type of adhesive. Please note that thermostats in hot melt hoppers are often inaccurate and may deviate considerably from the actual temperature on application rollers. It is advisable to measure the temperature on the application roller. Döllken PVC Edgebands cannot be glued using PVAC glue and the cold activation method.
Application temperatureFor best results fitting edgebands, work with boards and edgebands at room temperature (not below 18 °C). Material stored outdoors should be warmed up overnight. Hot melt glue will cure before the edgeband is in place if the temperature of the board or edgeband is too low. Draughts should for this reason also be avoided.
Wood moistureThe optimal moisture content of the boards should be between 7 and 10 % for further processing.
Feed rateThe special raw material formulation of Döllken PVC Edgebands is designed for feed rates both in low as well as high volume processing. Depending on the edgeband gluing machine, speeds between 10 and 100 m/min. are possible. Speeds up to 30 m/min. are also feasible on modern portal type machining centres, depending on profile shape.
Rates of adhesive applicationPlease follow the adhesive manufacturer’s instructions. Apply the adhesive evenly and in sufficient quantities for beads of adhesive to be pressed out along the edges of the freshly glued edgebands, ensuring that the gaps between chips are filled. The amount of glue required depends on the density of the chipboard and the type of adhesive.
Press rollersBearing in mind the machine parameters, ensure that an adequate number of rollers are available and adjust the pressure to achieve the best possible appearance of the joint.
ExtractionThermoplastic edgebands require higher extraction power than duroplastic edgebands. The advantage of Döllken PVC Edge-bands is the lower static charge picked up when compared to other thermoplastic raw materials.
MillingIf possible, use cutters with 3 to 6 teeth, with ca. 70 mm diameter and at speeds between 12 000 and 18 000 rpm. Incorrect speeds or blunt cutters may damage the edgebands. In the event of smearing, reduce the speed of the cutter or cut against the feed (increase feed, if necessary).
ScrapingBecause PVC tends to fade after scraping, the plastic scrapings should not exceed 0.1 to 0.2 mm in thickness. To avoid chatter marks, the routers used for milling should be running absolutely true Diamond coated cutters are recommended. Hot air blowers may be useful to optimise scraping, particularly where colour quality is critical.
BuffingDöllken PVC Edgebands are easy to buff on their radii using a buffing wheel. Any fading after scraping may simply be buffed away with these wheels, with the colour of the radius then matching that of the edgeband itself. With through-feed edgeband gluing machines, remnants of the glue may also be removed with the buffing wheel. Glue remnants may also be removed using electronically controlled separating agent spraying units as is common in industry. This improves the scraper blade finish as well.
5. Manuelle Verarbeitung
Die manuelle Verarbeitung von Döllken PVC-Kanten ist ebenfalls problemlos möglich, z. B. mittels eines Verleimständers oder einer Kantenpresse. Als Kleber empfehlen sich hier zweikomponentige Dispersionskleber auf Acrylbasis oder geeignete Kontakt- kleber. Bitte informieren Sie sich direkt bei Ihrem Kleberhersteller. Eine Verklebung mit einkomponentigem Holz-Weißleim ist nicht möglich. Für die Verklebung von Hand lassen sich spezielle Lackleime, Lösemittelkleber oder Kartuschenklebstoffe (PU) einsetzen. Eine Typenliste stellen wir Ihnen gerne auf Anfrage zur Verfügung.
Die Verklebung sollte bei Raumtemperatur erfolgen.
Beim Einsatz von Kontaktklebern ist zu berücksichtigen, dass nach dem Kleberauftrag auf Kante und Platte die Ablüftzeit eingehalten werden muss, um eine optimale Kantenverklebung sicherzustellen. Anschließend wird die Kante angeklopft.
Beim Einsatz von Dispersionsklebern muss auf den verklebungsbeschleunigenden Einsatz von Temperatur verzichtet werden (z. B. Heizschienen). Nach dem Aushärten (je nach Kleber bis ca. 6 Stunden) kann mit der Weiterbearbeitung begonnen werden (siehe hierzu Punkt 4).
Verarbeitungsanleitung PVC-Kanten | Instructions PVC Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
308 309
5. Manual processing
Döllken PVC Edgebands may also be applied manually, using a gluing jig or edgeband press, for instance. 2-component, acrylic based dispersion adhesives or suitable contact adhesives are recommended. For further information, please contact your adhesives manufacturer directly. Single component wood PVAC glue is not suitable for gluing. Special lacquer adhesives, solvent glues or cartridge adhesives (PU) may be used for manual gluing. We will gladly provide you with a list of adhesives on request.
Gluing should be carried out at room temperature.
To achieve optimal edgeband bond when using contact adhesives, ensure that the cure time after applying adhesive to edgeband and board is observed. This is followed by tapping on the edgeband.
Heating to speed up adhesion (e.g. heating rails) is superfluous when using dispersion glues. Processing may continue after curing (up to ca. 6 hours, depending on adhesive) (see Point 4).
6. Mechanische Eigenschaften
AbriebfestigkeitDie Oberfläche von bedruckten Döllken PVC-Kanten wird mit UV-gehärtetem Acryllack kratzfest versiegelt. Die Druckbilder weisen zudem eine hervorragende Kratz- und Abriebfestigkeit auf.
Kugeldruckhärte/Shore-Härte DNach DIN EN ISO 2039-1 bzw. DIN EN ISO 868 erreicht Döllken-PVC auch bei der Oberflächenhärte sehr gute Ergebnisse.
WärmeformbeständigkeitMit einem Wert von 80 (± 2) °C nach Vicat B 50 sind Döllken PVC-Kanten für den Einsatz in der Möbelindustrie und im Innen-ausbau hervorragend geeignet.
LackierungDöllken PVC-Kanten in Unifarben lassen sich ohne Vorbehandlung problemlos in der von Ihnen gewünschten Farbe lackieren. Nähere Informationen über den am besten geeigneten Lacktyp erhalten Sie von Ihrem jeweiligen Lackhersteller.
6. Mechanical characteristics
Resistance to abrasionThe surface of printed Döllken PVC Edgebands is sealed with UV-hardened acrylic varnish to give a scratch-resistant finish. The printed patterns also have excellent resistance to scratching and abrasion.
Ball indentation/shore hardness DDöllken PVC also scores excellent surface hardness pursuant to DIN EN ISO 2039-1 or DIN EN ISO 868..
Resistance to warp under heatWith a withstand value of 80 (± 2) °C as per Vicat B 50, Döllken PVC Edgebands are ideally suited for use in the furniture industry and for interior fittings.
VarnishingPlain coloured Döllken PVC Edgebands may easily be varnished in the colour of your choice, without the need for pre-treatment. Contact your coatings manufacturer for the most suitable type of varnish.
7. Lichtechtheit
Döllken PVC-Kanten werden in einem speziellen Verfahren im Döllken Technikum ständig hinsichtlich ihrer Lichtechtheit geprüft. Mit einer Lichtbeständigkeit von 7 bis 8 gemäß Wollfarbskala sind sie bestens für den Inneneinsatz geeignet (DIN EN 15187).
7. Lightfastness
The Döllken Technical Department uses a special method for regular tests on Döllken ABS Edgebands for lightfastness. With a permanence of 7 to 8 on the wool colour scale, they are ideal for interior use (DIN EN 15187).
8. Reinigung
Für die Reinigung von Döllken PVC-Kanten empfiehlt sich die Verwendung von speziellen Kunststoffreinigern. Stark lösungs-mittelhaltige Substanzen sollten nicht eingesetzt werden.
8. Cleaning
Special plastic cleaning agents are recommended for cleaning Döllken PVC Edgebands. Do not use substances with high solvent content.
9. Entsorgung
PVC-Reststoffe von der Weiterverarbeitung sollten getrennt werden. Es existiert ein Rücknahmesystem für die entsprechenden Reststoffe.
9. Disposal
PVC processing waste should be separated out. A system exists for the return of such waste materials.
Verarbeitungsanleitung PVC-Kanten | Instructions PVC Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
310 311
10. Qualität und Toleranzen
Für eine gleichbleibend hohe Qualität der Döllken PVC-Kanten sorgen umfangreiche Qualitätssicherungsmaßnahmen wie die ständige Verbesserung der Rohstoffeigenschaften im eigenen Technikum. Die Fertigungstoleranzen für Kantenbänder sind eng definiert und werden bei jeder Fertigung regelmäßig überprüft.
a. Breiten-Toleranzen
Breite PVC-Kanten
0 – 30 mm ± 0,5 mm
> 30 mm ± 0,5 mm
b. Stärken-Toleranzen
Stärke PVC-Kanten
0 – 1,0 mm+ 0,10 mm
– 0,15 mm
1,1 – 2,0 mm+ 0,10 mm
– 0,20 mm
2,1 – 4,0 mm+ 0,15 mm
– 0,25 mm
> 4,0 mm+ 0,20 mm
– 0,30 mm
c. Vorspannungs-Toleranzen
StärkeBreitebis 30 mm
Breiteab 30 mm
0 – 1,0 mm 0,20 – 0,50 mm 0,30 – 0,70 mm
1,1 – 2,0 mm 0,10 – 0,30 mm 0,15 – 0,35 mm
2,1 – 4,0 mm 0,10 – 0,20 mm 0,10 – 0,30 mm
4,1 – 6,0 mm 0,00 – 0,20 mm 0,00 – 0,25 mm
> 6,0 mm 0,00 – 0,10 mm 0,00 – 0,15 mm
d. Planparallelität
Stärke Maximale Abweichung
0 – 1,0 mm max. 0,10 mm
1,1 – 2,0 mm max. 0,10 mm
2,1 – 4,0 mm max. 0,15 mm
> 4,0 mm max. 0,20 mm
e. LängsverzugAuf 1 m Länge max. 3 mm Verzug.
10. Quality/Tolerances
The consistently high quality of Döllken PVC Edgebands is ensured through comprehensive quality assurance measures such as ongoing improvement of raw material properties by our own Technical Department. The manufacturing tolerances for edgebands are tight and are checked for each manufacturing run.
a. Width tolerances
Width PVC Edgebands
0 – 30 mm ± 0.5 mm
> 30 mm ± 0.5 mm
b. Thickness tolerances
Thickness PVC Edgebands
0 – 1.0 mm+ 0.10 mm
– 0.15 mm
1.1 – 2.0 mm+ 0.10 mm
– 0.20 mm
2.1 – 4.0 mm+ 0.15 mm
– 0.25 mm
> 4.0 mm+ 0.20 mm
– 0.30 mm
c. Pretensioning tolerances
ThicknessWidthto 30 mm
Widthfrom 30 mm
0 – 1.0 mm 0.20 – 0.50 mm 0.30 – 0.70 mm
1.1 – 2.0 mm 0.10 – 0.30 mm 0.15 – 0.35 mm
2.1 – 4.0 mm 0.10 – 0.20 mm 0.10 – 0.30 mm
4.1 – 6.0 mm 0.00 – 0.20 mm 0.00 – 0.25 mm
> 6.0 mm 0.00 – 0.10 mm 0.00 – 0.15 mm
d. Plane parallelity
Thickness Maximum deviation
0 – 1.0 mm max. 0.10 mm
1.1 – 2.0 mm max. 0.10 mm
2.1 – 4.0 mm max. 0.15 mm
> 4.0 mm max. 0.20 mm
e. Longitudinal warpageMax. 3 mm warpage per 1 m length.
Verarbeitungsanleitung PVC-Kanten | Instructions PVC Edgebands
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
312 313
1. Fugenbild
Da die Döllken 3D-, ABS-, PVC-, und PP-Kanten vom Werk aus mit einer definierten Vorspannung geliefert werden, erhalten Sie stets ein dichtes und optisch einwandfreies Fugenbild. Die Vorspannung sichert darüber hinaus eine bestmögliche Verkle-bung über die Aufnahme des überschüssigen Klebers im Mittelpunkt der Kantenrückseite.
1. Joint appearance
Since Döllken 3D, ABS, PVC and PP Edgebands are delivered pretensioned ex works, the appearance of joints will always be tight and visually appealing. Pretensioning furthermore ensures optimal bonding since excess glue collects in the middle of the back of the edgeband.
2. Chemische Eigenschaften
Nach DIN 68861 1-8 sind Döllken 3D-, ABS-, PVC- und PP-Kanten in Verbindung mit einer Vielzahl an handelsüblichen Haus-haltsreinigern getestet worden. Der Kontakt zu aggressiven Substanzen, wie z. B. Alkohol- oder Lösungsmittelzusätze, ist in jeglicher Form zu vermeiden (siehe Reinigungshinweise). Darüber hinaus wurden Döllken Kanten durch das LGA in Nürnberg geprüft. Döllken Kanten sind brennbar wie Holzwerkstoffe auch. Die thermische Zersetzung beginnt ab ca. 300 °C.
2. Chemical characteristics
Döllken 3D, ABS, PVC and PP Edgebands have been tested pursuant to DIN 68861 1-8 in conjunction with numerous stan-dard domestic cleaning agents. Avoid any form of contact with aggressive substances such as alcohol or solvent additives (see Notes on cleaning). Döllken edges have also been tested at the LGA in Nuremberg. Döllken Edgebands are combustible, as is wood. Thermal decomposition starts after ca. 300 °C
3. Stationäre Verarbeitung
Döllken ABS, PVC und PP Kantenbänder lassen sich hervorragend auf dem Bearbeitungszentrum verarbeiten. Unter Berück-sichtigung einiger ausschlaggebender Faktoren, sind selbst enge Radien realisierbar.
Einen signifikanten Einfluss auf den Verarbeitungsprozess nehmen: Kantenausführungen (Abmessung, Grundfarbe, etc.) Umgebungs- sowie Materialbedingungen (Temperatur, Feuchtigkeit des Werksstoffes) Klebstoffeigenschaften (Klebstofftyp, Temperatur, Viskosität) Maschinen-Equipment (Kantenvorwärmung, Andruck, Art der Leimauftragswalze) Verarbeitungsprogrammierung (Vorschub, Offset, Andruck)
Mit bedruckten Kantenbändern lassen sich in der Regel engere Radien realisieren als mit UNI-Kanten, da möglicher Weiß-bruch von den Druckfarben bis zu einem gewissen Punkt überdeckt wird. Auf Anfrage können wir Ihnen gerne genauere Informationen zur Verfügung stellen.
3. Work station processing
Döllken ABS, PVC and PP Edgebands may be excellently processed on machining centres. Even tight radii may be handled if certain decisive factors are borne in mind.
The following factors significantly impact on processing: Edgeband designs (dimension, base colour, etc.) Environmental and material conditions (temperature, material moisture) Adhesive properties (type of adhesive, temperature, viscosity) Machinery (edgeband preheating, pressure, type of glue application roller) Process programming (feed, offset, pressure)
Tighter radii may normally be achieved with printed edgebands than with UNI edgebands, since potential whitening of the printed colours is covered to a certain extent. We will gladly provide you with further details on request.
4. Lagerung
Döllken 3D-, ABS-, PVC- und PP-Kanten sind beständig gegen Verrottung und können daher in witterungsgeschützter Umgebung bei Raumtemperatur nahezu unbegrenzt gelagert werden.
4. Storage
Döllken 3D, ABS, PVC and PP Edgebands are resistant to rotting, allowing virtually permanent storage in an environment protected against the weather and at room temperature.
5. Problemdiagnose: Tipps und Hinweise bei Verarbeitungsproblemen
Problem Problemdiagnose und Lösungsvorschläge
1. Kante lässt sich von Hand leicht abziehen. Schmelz- kleber verbleibt auf der Spanplatte. Die Raster-struktur der Kleberauftragswalze ist sichtbar.
Klebeauftrag nicht ausreichend Raumtemperatur zu niedrig Kantenmaterial zu kalt (Außenlagerung) Schmelzklebertemperatur zu niedrig Vorschubgeschwindigkeit zu gering Anpressdruck der Auftragswalzen zu gering
2. Kante lässt sich von Hand leicht abziehen. Schmelz- kleber verbleibt auf der Spanplatte. Die Schmelz-klebeoberfläche ist dabei völlig glatt (Kante rutscht ab).
Platte und/oder Kante zu kalt Schmelzklebertype überprüfen Haftvermittlerauftrag überprüfen
3a. Kante lässt sich von Hand abziehen. Schmelzkleber verbleibt größtenteils an der Kante.
Temperatur des Plattenmaterials durch vorhergehende Verarbeitung (z. B. Furnieren) zu hoch
3b. Leimfuge ist nicht geschlossen (KAM). Anpressdruck zu gering Klebstoff zu kalt Auftragstemperatur erhöhen oder Platte vorwärmen oder Vorschub erhöhen Kanten besitzen keine oder eine umgekippte Vorspannung
Allgemeine technische Verarbeitungsinformationen | Generel technical instructions
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
314 315
3c. Leimfuge ist nicht geschlossen (BAZ). Anpressdruck ist zu gering Kante zu kalt gefahren und kann nicht verquetscht werden zu hohe Rückstellkräfte des Kantenmaterials mehr Strahlerleistung oder Vorschub reduzieren Geometrie vergrößern oder dünneres Kantenmaterial einsetzen Klebstoff nicht BAZ-tauglich, zu geringe Hitzeklebrigkeit Klebstoff bindet nicht schnell genug ab Leimauftragstemperatur reduzieren Kanten besitzen keine oder eine umgekippte Vorspannung
3d. Kanten sind nur im Randbereich verklebt. Anpressdruck ist zu gering Fügefräsung am Plattenteil hohl Vorspannung der Kanten zu groß
4. Die angeleimte Kante weist an der Plattenvorder-kante keine ausreichende Verleimung auf, bzw. die Kante ist durch falsch angeordnete Kleberauftrags-walze vorne abgesplittert.
Kleberauftrag nicht ausreichend durch falsch angeordnete Kleberauftragswalze Auftragsmenge erhöhen
5. Fräswellen sind sichtbar. Vorschub zu schnell Schnittgeschwindigkeit der Fräser zu niedrig mit Ziehklingen und Schwabbelstation nacharbeiten im Gegenlauf fräsen Schneideanzahl der Fräse erhöhen Drehzahl erhöhen
6. Bei dicken Kantenbändern hellt der Farbton im Fräsbereich etwas auf (Weißbruch).
Fräsbereich mittels Heißluftstation erwärmen (nachrüstbar) Ziehklingenspan ist zu dick mit Schwabbelstation nacharbeiten Ziehklingenspan reduzieren (max. 0,1 – 0,2 mm)
7. Weißbrucherscheinung bei der BAZ-Verarbeitung im Radius.
Kante zu kalt gefahren mehr Strahlerleistung oder Vorschub reduzieren Geometrie vergrößern oder dünneres Kantenmaterial einsetzen
8. Starkes Fädenziehen des Klebstoffes nach Auftrag Auftragstemperatur verringern Verleimteil reinigen anderen Klebstoff testen
9. „Mäusezähne“ in der Fuge Auftragsmenge erhöhen Auftragstemperatur erhöhen Platte vorwärmen
10. Ausbrüche der Längskanten nach der Querbekantung
MDF-Platte nur formatieren und einsetzen den Fräser überprüfen, ob die Eintauchtiefe i. O. ist Materialabnahme verringern oder andere Spanplatten verwenden
11. Beschädigung des Dekors der Kante bei der BAZ Bearbeitung
Spezielle Gummiwalzen verwenden
12. „Dellen“ oder „Kratzer“ in der Kante Kanteneinzug reinigen Andruckrollen säubern und mit Trennmittel einsprühen Tastschuhe reinigen, wenn nicht besser, dann Tastschuhe nach
Beschädigungen absuchen und gegebenenfalls austauschen
13. Ausbrüche oder Verschmierungen an den Enden der Kante
Kappsäge schärfen lassen Werkzeughersteller nach einem passenden Werkzeug fragen
14. Ausbrüche oben und unten an der Kante Kantenüberstand verringern Kanten und Platten einen Tag vor der Verarbeitung akklimatisieren (über 18 °C) Raumtemperatur erhöhen und Zugluft vermeiden
15. Kante verschmiert beim Kopieren Schneidenanzahl verringern Drehzahl regulieren Kanten im Gegenlauf befräsen Vorschub erhöhen
16. 3D 2in1 Versatz im Eckbereich genaues Einstellen des Kantenniederhalters Kantenüberstände minimal einstellen Kante auf Säbelform überprüfen
Problem Problemdiagnose und Lösungsvorschläge Problem Problemdiagnose und Lösungsvorschläge
5. Problem Diagnosis: Tips and hints for processing problems
Problem Problem diagnosis and solution proposals
1. Edgeband pulls off easily by hand. Hot melt adhesi-ve remains on the chipboard. The grid pattern of the glue application roller is visible.
Not enough adhesive applied Room temperature too low Edgeband material too cold (stored outdoors) Hot melt adhesive temperature too low Feed rate too low Too little pressure applied by application roller
2. Edgeband pulls off easily by hand. Hot melt adhe-sive remains on the chipboard. Hot melt adhesive surface totally smooth (edgeband slips off).
Board and/or edgeband too cold Check hot melt adhesive type check application of bonding agent
3a. Edgeband pulls off by hand. Hot melt adhesive largely remains on the edge-band.
Temperature of board material too high as a result of previous processing (e.g. veneering)
3b. Adhesive joint not closed (edgeband gluing machine).
Too little pressure applied Adhesive too cold Increase application temperature or preheat board or increase feed rate Edgebands either not or reverse pretensioned
3c. Glue joint not closed (machining centre). Too little pressure applied Edgeband was fed in too cold and cannot be squeezed Edgeband material restoring force too high Increase heater power or reduce feed rate Increase geometry or use a thinner edgeband Adhesive not suited for use in machine centres, adhesion under heat too low Adhesive does not set fast enough Reduce glue application temperature Edgebands not or reverse pretensioned
3d. Edgebands are bonded only at the edges Too little pressure applied Milled joint on board hollow edgeband pretensioning too high
4. Inadequate bonding of the glued edgeband at the face side of the board, or the edgeband is chipped on the face side due to misaligned adhesive appli-cation roller.
Not enough adhesive applied due to misaligned glue application roller Apply more adhesive
5. Milling waves are visible. Feed rate too high Cutting speed of cutters too low re-process with scrapers and buffing; cut against the feed Increase number of cutters on router bit Increase rpm
Allgemeine technische Verarbeitungsinformationen | Generel technical instructions
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
316 317
6. On thick edgebands the colour fades slightly in the milled areas (stress whitening).
Warm up milled area with hot-air station (can be retro-fitted) Scraper blade chips too thick Rework on buffing station Reduce scraper blade chip thickness (max. 0.1 – 0.2 mm)
7. Evidence of stress whitening in radius during ma-chine centre processing.
Edgeband fed in too cold Increase heater power or reduce feed rate Increase geometry or use a thinner edgeband material
8. Adhesive stringy after application Reduce application temperature Clean gluing part test using different adhesive
9. So-called “mice teeth” in the joint Apply more adhesive Increase application temperature Preheat board
10. Breakout of longitudinal edges after cross- edging Only format MDF board and use Check the router for immersion depth; Reduce material removal or use different chipboard
11. Edgeband surface print damaged during machine centre processing
Use special rubber rollers
12. “Indentations” or “scratches” in the edgeband Clean edgeband draw-in Clean press rollers and spray with separating agent Clean scanning head; if this does not help then check scanning head for damage and replace, if necessary
13. Breakouts or smears at edgeband ends Sharpen cross-cut saw Ask the tool manufacturer for a suitable tool
14. Breakouts on top and bottom edges Reduce edgeband overhang Acclimatise edgebands and boards one day prior to processing (over 18 °C) Increase room temperature and prevent draught
15. Edgeband smears when copying Reduce number of blades Control rpm Mill edgebands against the feed Increase feed rate
16. 3D 2in1 offset in corners Accurately set edgeband downholder Minimise edgeband overhang Check that edgeband is straight
Problem Problem diagnosis and solution proposals
Allgemeine technische Verarbeitungsinformationen | gen. technical application information
6. Fazit Kantenwerkstoffe
Anwenguns bzw. Anforderung Kantenwerkstoffe
Chlorfreie Werkstoffe ABS, PP, 3D
Labormöbel PVC, PP
Hohe Hitzbeständigkeit im Herdbereich ABS, PP, 3D
Außergewöhnliche Optik, hohe Qualität 3D
Preis ABS, PVC, PP
Problemlose Verarbeitung mit einfachen Maschinen PVC, ABS
Eine Kante für möglichst viele Anforderungen ABS
Großserienverarbeiter PP
6. Conclusion, edgeband materials
Application or requirement Edgeband materials
Chlorine-free materials ABS, PP, 3D
Laboratory furniture PVC, PP
High heat resistance in vicinity of stove ABS, PP, 3D
Exceptional appearance, high quality 3D
Price ABS, PVC, PP
Straightforward processing on simple machines PVC, ABS
One edgeband to meet as many demands as possible ABS
High volume processor PP
Vera
rbei
tung
sanl
eitu
ng |
Inst
ruct
ion
s
318