PS Manual 0108

Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com 0108

DRUCKSENSOR SERIE PS400/500/600

PRESSURE SENSOR SERIES PS400/500/600

DÉTECTEUR DE PRESSION SÉRIE PS400/500/600

BEDIENUNGS-ANLEITUNG

INSTRUCTION MANUAL

MODE D'EMPLOI

S 1610/03


TURCK – Ihre erste Adresse in der Industrieautomation

TURCK ist eine der global führenden Unternehmensgruppen auf dem Sektor der Industrieautomation. Als Komplettanbieter für IP67-Komponenten unterhalb der SPS liefert das Unternehmen über 13.000 Produkte aus den Bereichen der Sensor-, Interface-, Feldbus- und Anschlusstechnik. Das vielfältige TURCK-Produktspektrum bietet innovative Lösungen für jede Applikation.

TURCK - your fi rst choice in industrial automation

TURCK is one of the globally leading corporations in the industrial au-tomation sector. As a full range supplier of IP67 components below the controller level, the company offers more than 13,000 sensor, interface, fi eldbus and connection products. TURCK’s versatile product spectrum offers innovative solutions for all applications.

TURCK - Votre premier choix en matière d’automatisation industrielle

TURCK est l’un des leaders dans l’automatisation industrielle. En tant que fournisseur complet pour les composants IP67 au dessous du niveau PLC, l’entreprise propose plus de 13000 détecteurs, interfaces et produits issus de la technologie bus de terrain et de la connectique. La gamme de produits TURCK particulièrement polyvalente offre des solutions innovantes pour tous les types d’application.


��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

!��

��

��

��

��

��

�"�

��

��

��#$��%��

��#$��%��

��

��

��

��

��

��

PS…-…-2UPN8X-…


PS…-…-2UPN8X-…

Para- Erläuterung Explanation ExplicationmeterLoc sperren inhibit/lock Bloquer uLoc entsperren enable/unlock Débloquer Uni Druckeinheit unit of pressure Unité de pression SP1 Schaltpunkt 1 Switch point 1 Point de commutation 1 rP1 Rückschaltpunkt 1 Point de comm. de ret. 1ou1 Ausgangs- Switching output Fonction de sortie 1 funktion 1 function 1 SP2 Schaltpunkt 2 Switch point 2 Point de commutation 2

rP2 Rückschaltpunkt 2 Point de comm. de ret. 2ou2 Ausgangs- Switching output Fonction de sortie 2 funktion 2 function 2 EF zusätzliche Additional Fonctions Funktionen functions supplémentairesHi Maximalwert- Max-value Mémoire valeur Speicher Lo Minimalwert- Min-value Mémoire valeur Speicher CoF Offset Justage Offset correction Offset Justage dS1 Verzögerung S1 Switch point delay S1 Temporisation S1

dr1 Verzögerung r1 Release point delay r1 Temporisation r1 dS2 Verzögerung S2 Switch point delay S2 Temporisation S2

dr2 Verzögerung r2 Release point delay r2 Temporisation r2 P-n Verhalten/ Characteristics/ Comportement/ Schaltausgang Switching output Commutation de sortiedAP Dämpfung Damping of Atténuation de la sortie Schaltausgang switching output logique diS Display- Display update Actualisation affi cheur AktualisierungrES zurück in den Reset to default Remise à l’état par Auslieferzustand SoF Software-Version Software version Version logiciel

Release point 1

Release point 2

memory

memory

settings

Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com 1 /0108

Pre

ssur

e se

nso

r S

erie

s P

S...

Pre

ssur

e se

nso

r S

erie

PS

...

Table of Contents

Chapter Contents Page

1 Introduction 2 2 Safety information 2 2.1 General information 2 2.2 Correct usage to the intended purpose 2 2.3 Qualifi ed staff 3 2.4 Remaining hazards 3 2.5 CE conformity 3 3 Description 4 4 Set-up 5 5 Installation 5 5.1 Mounting recommendations 7 6 Electrical connections 7 7 Description of the switching functions 8 8 Operating modes 9 9 Programming 10 9.1 Locking/Unlocking 1010 Adjustable parameters 1110.1 Standard parameters 11 10.2 Additional parameters (sub-menu EF) 1411 Dimension drawings of the different types 17 12 Typical curve of analogue output 18 13 Technical data 19

2 /0108 Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com

Pressure Sensor Series PS...

1 Introduction

Dear CustomerWe would like to thank you for choosing our product.The sensors can be programmed on-site for many different applications.In order to fully use the wide range of functions, we kindly request you to follow the guidelines:

Any person entrusted with the set-up or operation of the device, must have read and understood this operation manual, in particular all safety notes.

2 Safety information

2.1 General information

In order to ensure safe operation, the device may only be operated in accordance to the specifi cations stated in this operation manual. Futher-more, all legal and safety regulations concerning this specifi c applica-tion should be observed.This also applies to the use of accessories.

2.2 Correct use to the intended purpose

These devices are designed for indication and monitoring of process variables. All other forms of usage do not comply with the intended pur-pose.These sensors may not be used solely as means for prevention of dan-gerous machine and system conditions. Machines and systems must be constructed in such a way, that faulty states cannot lead to a dangerous situation for the operating staff (e.g. due to independent limit switches, mechanical interlocking devices, etc.).


Pre

ssur

e se

nso

r S

erie

s P

S...�

2.3 Qualifi ed staff

The devices may only be installed, connected, set-up and operated by qualifi ed staff and in compliance with the technical specifi cations.Qualifi ed staff is defi ned as persons, who are familiar with set-up, mounting, start-up and operation of this device and who possess a recognized degree or certifi cate of appropriate professional training.

2.4 Remaining hazards

These sensors employ state-of-the-art technology and are safe to oper-ate. However, if they are installed and operated by unqualifi ed staff, an element of risk remains.

In this manual the remaining risks are marked by the following symbol:

This symbol is posted where there is a risk of serious injury or death or the damage of material and property, if the warning is ignored

2.5 CE conformity

The device accords to EN 61326 and may only be used in industrial environments.The declaration of conformity can be downloaded from the Internet un-der www.turck.com



3 Description

Devices of the PS series... are intelligent pressure sensors which have been developed especially for the use in machine engineering.The following 3 output variants are available:…2UPN8X 2 switching outputs (pnp/npn)…LI2UPN8X 1 output switching (pnp/npn) and 1 output switching (pnp/npn) or analog output (current)…LUUPN8X 1 output switching (pnp/npn) and 1 analog output (voltage)

The measured pressure can be displayed in bar, psi, kPa, MPa and 10 different selectable pressure units (Ud1-Ud10). The output signal can be scaled with a ratio of 1:4.The start and end point of the analog signal can be offset (minimum dis-tance 25 % of the rated pressure range). Min. and max values are stored and can be read in the programming mode. The housing PS...-5... can be rotated (360°) and fi xed after mounting.

Pressure type: Relative pressureType Measuring range Allowed overpressurePS01VR-… -1...0 bar 3 barPS001R-… 0...1 bar 3 bar PS001V-… -1...1 bar 3 bar PS003V-… -1...2.5 bar 7 barPS010V-… -1...10 bar 25 bar PS016V-... -1...16 bar 40 barPS025V-... -1...25 bar 65 barPS040V-... -1...40 bar 100 barPS100R-... 0...100 bar 250 barPS250R-... 0...250 bar 625 barPS400R-... 0...400 bar 900 barPS600R-... 0...600 bar 900 bar


Pre

ssur

e se

nso

r S

erie

s P

S...

�

4 Installation and set-up instructions

1. Even though the device is excellently protected against electro- magnetic interference, installation and cabling must be carried out correctly to ensure interference immunity.

2. Never route signal and control cables together with the trunk line or feeder cables of motors, cylinder coils, rectifi ers etc. The cables must be routed in conductive and grounded cable conduits. This applies especially to long-distance cables, or environments in which the cables are exposed to strong radio waves from broadcasting stations.

3. Signal lines should be installed in mounting cabinets and as far away as possible from contactors, control relays, transformers and other sources of interference.

4. The housing surface may not be painted or coated, because the reference port could be clogged.

5 Mounting

• Prior to mounting or removing the sensor it must be verifi ed that the system is depressurized.

• Do not mount sensors in locations subject to high pressure pulses. • Signifi cant thermal changes in the sensor environment can lead to a zero shift. As a result, the measuring value displayed in a depressurized state will read zero. This kind of drift can be corrected (see chapter 10.2, parameter CoF).

• The read direction of the on-site display can be rotated via software by 180° (see chapter 10.2, parameter diS).

• In the depressurized state, the housing of the PS...-5... series can be rotated by 360°.



• It is required to observe the pressure connection instructions and only use a matching counterpiece.


Pre

ssur

e se

nso

r S

erie

s P

S...

6 Electrical connection

5.1 Mounting recommendations

Pre

ssur

e se

nso

r S

erie

PS

...

��

��

PS…-LI2UPN…

��

��

��

��

��

��

��

��

��

��

��

PS…-2UPN… PS…-LUUPN…

��

��

��

��



Hysteresis:This function ensures a stable switch-ing status, independent of the system-inherent pressure fl uctuations and the adjusted set point.

The switching range is defi ned by the user via a switching point (SP) and a release position (rP).

Window:With this function a range is determined in which the switch enters a defi ned switching status.

The switching range is defi ned by the user via an upper window limit (SP) and a low window limit (rP).

7 Description of the various switching functions

�� !�!��

�

��

�

��

�

"�"

��#

�

��

�

��

�

"�"

$��$�#

�%��# &##�'&%(��&�)�'(&)��&##�'&%(�

The minimum hysteresis between SP and rP is approx. 0.5 % of the nominal pressure range.The minimum value of SP is1 % of the nominal pressure range.

If the applied pressure is above or below the customer defi ned limits, the display starts fl ashing. If the applied pressure is 0.3 % outside the operating range of the unit, the display will indicate UL at the lower range limit and OL at the upper range limit.

rP

rP


Pre

ssur

e se

nso

r S

erie

s P

S...

8 Operating modes

Run mode – Standard operationThe sensor detects the system pressure and acts in accordance with the required switching or analogue performance, meeting the default-factory or customer-specifi c parameters. The display indicates the ap-plied system pressure, the selected unit of pressure and the status of the switching outputs.

Menu mode - Parameters and associated valuesBy pushing the mode button, the display enters the menu mode. In this mode all parameters and the associated values can be read. To view the values associated with a parameter, simply press the "Set" button. The adjustment options can be read from the table in section 10.

Programming mode - Adjusting the parameter valuesThe programming mode is accessed via the menu mode. In this mode, all adjustable parameters can be modifi ed. As described under Menu mode, by pressing the "Set" button the programmed value for a certain parameter can be viewed. In order to modify this value, the "Set" button must be pressed and held until the display stops fl ashing. Now the value can be re-adjusted with the "Set" and "Mode" button. In the program-ming mode, the "Set" and "Mode" button can also be used as "UP" and "Down" button. The adjustment options can be taken from the table in section 10.



9 Indication of the parameter values and programming

Press the "Mode" button. The display now shows the parameter ”Uni”. (Should ”Loc” be displayed, the sensor must be enabled. For this please refer to the information provided in paragraph 9.1). You can now view the setting of the parameter ”Uni” (see below) or select further parameters. To select other parameters, press the ”Mode” button several times. To view the actual parameter value, simply press the ”Set” button.

If you want to alter this value, please press the "Set" button and hold it for 5 s until the shown value stops fl ashing. Via the � and � buttons you can now change the value.

Then press the recessed ”Enter” button to save the changed value.

The new setting is consequently activated.

9.1 Locking/Unlocking (disabling/enabling)

This sensor enables or disables access to the menu and programming mode.

To disable access, call up the RUN mode, press and hold the ”Mode” and ”Set” buttons simultaneously until thedisplay indicates Loc.

To enable access, call up the RUN mode, press and hold the "Mode" and "Set" buttons simultaneously until the display indicates uLoc.

��

��

��

��

�

�

�

� �

��

��

�

� �

��

��

��

��

��

�

�

�

� �

��

��

�

� �

��

��

��

��

��

�

�

�

� �

��

��

�

� �

��

��

��

��

��

�

�

�

� �

��

��

�

� �

��


Pre

ssur

e se

nso

r S

erie

s P

S...

10 Adjustable parameters and their meaning

10.1 Standard parameters

Parameter Explanation Options Function Loc Disabling the Programming mode programming mode fully disabled/locked uLoc Enabling the Programming mode programming mode enabled/unlocked (default/ex factory) Uni Display unit bar bar (LED green) psi psi (LED green) kPa kPa (LED green) MPa MPa (LED green) misc see Tab. 1 (LED green)ou1 Function of Hno1 Hysteresis function output 1 (N/O = normally open) Hnc1 Hysteresis function (N/C = normally closed) Fno1 Window function (N/O = normally open) Fnc1 Window function (N/C = normally closed)

SP1 Switch point 1 Upper limit value at which output 1 changes its switching status rP1 Release point 1 Lower limit value at which output 1 changes its switching status Tab.1: Ud1-Ud10Ud 1 = Millibar = Hektopascal Ud 6 = Inch of Hg (60 °F)Ud 2 = mm Hg (0 °C) = Torr Ud 7 = Inch of Hg (32 °F)Ud 3 = Inch of water (60 °F) Ud 8 = mH2O (16 °C)Ud 4 = Inch of water (39 °F) Ud 9 = mH2O (4 °C)Ud 5 = Foot of Water (39 °F) Ud10 = kg / cm²



Parameter Explanation Options Functionou2 Function of Hno2 Hysteresis function output 2 (N/O = normally open) Hnc2 Hysteresis function (N/C = normally closed) Fno2 Window function (N/O =normally open) Fnc2 Window function (N/C = normally closed) Analog output (I) 4-20 rising straight line only type: 0-20 PS...-LI... 20-4 falling straight line 20-0 Analog output (V) 0-10 rising straight line only type: 0-5 PS...-LU... 1-6 10-0 falling straight line 5-0 6-1SP2 Switch point 2 Upper limit value at only type: which output 2 PS...-2UPN8X, changes its switching PS...-LI2UPN8X status

rP2 Release point 2 Lower limit value at only type: which output 2 PS...-2UPN8X, changes its switching PS...-LI2UPN8X status

ASP Starting point of Pressure value at which the analog output the analog output has only type: its starting point. It is set PS…-LI…, via the "Mode" and "Set" PS…-LU… button.

10.1 Standard parameters – Continuation


Pre

ssur

e se

nso

r S

erie

s P

S...

10.1 Standard parameters – Continuation

Parameter Explanation Options FunctionAEP End point of the Pressure value at analog output which the analog only type: output has its end point. PS…-LI…, It is set via the "Mode" PS…-LU… and "Set" button.

EF Extra menu for If the display shows additional the parameter EF, settings the user can adjust various additional parameters in the sub- menu using the "Set" button (see 10.2).



10.2 Additional parameters (sub-menu EF)

Parameter Explanation Options FunctionHi Max. value The highest pressure memory value is stored in the non-volatile memory. Lo Min. value The lowest pressure memory value is stored in the non-volatile memory. CoF Offset correction Signifi cant thermal changes in the sensor environment can lead to zero shift. As a result, the measuring value displayed in a depressurized state will not read zero. This drift can be corrected. Adjustment range: -5 to +5 % of the measuring spandS1 Switching delay 0 / 0.1 ... 50 s in of SP1 increments of 0.1 s (0 = delay time is not active) dr1 Switching delay 0 / 0.1 ... 50 s in of rP1 increments of 0.1 s (0 = delay time is not active)


Pre

ssur

e se

nso

r S

erie

s P

S...

Parameter Explanation Options FunctiondS2 Switching delay 0 / 0.1…50 s in of SP2 increments of 0.1 s only type: (0 = switching delay is PS…LI2UPN8X not active) PS…2UPN8X dr2 Switching delay 0 / 0.1…50 s in of rP2 increments of 0.1 s only type: (0 = switching delay is PS…LI2UPN8X not active) PS…2UPN8X dAP Damping of the Pressure peaks of switching output short duration or high frequency can be fi ltered. (0 / 0.01 ... 4 s in increments of 0.01 s (0 = delay time is not active) dAA Damping of the Pressure peaks of analogue output short duration or high only type: frequency can be PS…-LI…, fi ltered. (0 / 0.01…4 s in PS…-LU… increments of 0.01 s, 0 = delay time is not active) P-n Switching npn NPN output mode pnp PNP

10.2 Additional parameters (sub-menu EF) – Continuation



Parameter Explanation Options Function diS Update of 50 50 ms update measuring value 200 200 ms update on display 600 600 ms update r50 50 ms update/ display rotated by 180° r200 200 ms update/ display rotated by 180° r600 600 ms update/ display rotated by 180° OFF Display is turned off and activated for 10 s by pressing the "Mode" or "Set" buttonrES Reset to the default state SOF Software version

10.2 Additional parameters (sub-menu EF) – Continuation


Pre

ssur

e se

nso

r S

erie

s P

S...

11 Dimension drawings of the various types

Housing/pressure connection4... adjustable, with display, fi xed pressure connection 401 G1/4" female thread402 1/4"-18NPT female thread403 1/4"-18NPT male thread404 G1/4" male thread

5... adjustable, with display, rotatable pres. connection501 G1/4" female thread502 1/4"-18NPT female thread503 1/4"-18NPT male thread504 G1/4" male thread505 7/16" UNF male thread508 G1/2" male thread manometer connection

510 R1/4" male thread

511 R1/4" female thread

6... adjustable, with display, fi xed pressure connection, pressure mem- brane fi tting606 G3/4" male thread front fl ush607 1 1/2" tri-clamp609 G1/2" male thread front fl ush

��"

��*

��+,

-��.��/��

/�,"+,�"+,

��"

��*

��+,

-��.��/��

��"

��

�"+,

��"

��*-��.��/��

��"

��

��+,

�"+,

��

��01�2��3

4�

�"+�,

��+*

-��.��/��

PS…-403/404

��

�"�

�2+5

-��.��

��0

/��

��"

��

��01�2��3

�",

��+,�"+�

��+*

-��.��/��

��"

��

��01�2��3

�"*

��+,

��+�

-��.��/��

PS…-401/402 PS…-501/502/511

PS…-606 PS…-607

PS…-609

PS…-503/504/510



12 Typical curves of the analogue outputs

Within the defi ned measuring range between ASP (analogue start point) and AEP (analogue end point), the output signal is between 4 and 20 mA or alternatively between 0 and 20 mA. The default setting of the measuring range is between 0 and MEW (measuring range end value) and the default output signal is between 4 mA (ASP) and 20 mA (AEP).

Voltage output

Within the defi ned measuring range between ASP (analogue start point) and AEP (analogue end point), the output signal is between 0 and 10 V or alternatively between 0 and 5 or 1...6 V. The ex-factory setting of the measuring range is between 0 and MEW (measuring range end value) and the default output signal is between 0 V (ASP) and 10 V (AEP).

Current output

��

6� �

�"

"�� -6� ��

��

�

6� �

�"

"� �� -6�

��

6� �

,�%789�"

"�� -6� ��

��

�

6� �

5

"� �� -6�

4…20 mA 0…20 mA

0…5 V or 0…10 V 1…6 V


Pre

ssur

e se

nso

r S

erie

s P

S...

13 Technical Data

TC 1) Temperature coeffi cient

Type PS…-4… PS…-5… PS…-6…Pressure range -1…600 bar -1…600 bar -1…400 barType of pressure Relative pressure/absolute pressureOutputs 2 switching outputs or 1 switching and 1 analog output (freely confi gurable)Current output (0)4…20 mA Current output 0…10 V 0…5 V 1…6 VDeviation from typ. curveNon-linearity, hysteresis, repeat accuracy ±0,5 %Output function 2 PNP/NPN, N.C/ N.O., progr. Switch point accuracy ±0.5 % Switch point clearance ≥ 0,5 %Switch points 1…100 % v. E.Release positions 0,5…99,5 % v. E.Switching frequency ≤ 180 HzOperating voltage 15... 30 VDC with 2 switching outputs 18...30 VDC with analog output SELV, PELF to EN 50178No-load current I0 ≤ 50 mAMedium temperature -40...85 °C -40...85 °C on requestAmbient temperature -40...80 °CStorage temperature -40...80 °CTC

1) of zero point per 10K ±0,15 % TC

1) of span per 10K ±0,15 %Voltage drop at Ie ≤ 2 VBurst protection pat. media stop pat. media stop –Short-circuit protection jaRev. polarity protection ja



Type PS…-4… PS…-5… PS…-6… Rated operating current 0,2 ADegree of protection IP67 Protection class III EMC EN 61000-4-2 ESD:4 KV CD/ 8 KV ADEN 61000-4-3 HF irradiated: 15 V/mEN 61000-4-4 Burst: 2 KVEN 61000-4-5 Surge: 500 V, 12 ΩEN 61000-4-6 HF conducted: 10 V Housing material Stainless steel 1.4304 (AISI 303) Pressure module ceramics Al2O3

Materials with – FPDM, 1.4305 (AISI 303), auf Anfrage medium contact: ceramics Al2O3

Pressure connection AF 21with fi xing torque max. 50 NmCoupling nut with – SW 30 –with fi xing torque – max. 35 Nm – Diaphragm fi tting no no yesDisplay, rotable 180 ° Sensor body, adjustable no 360 ° noVibration resistance 20 g (10…2000 Hz) acc. to IEC 68-2-6 Shock resistance 50 x g (11 ms) to IEC 68-2-27Connection connector M12 x 1Type of display 4-digit 7-segment display No. of progr. buttons 3


Pre

ssur

e se

nso

r S

erie

s P

S...

0108 Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com

Parameter Erläuterung Explanation ExplicationLoc sperren inhibit/lock Bloquer uLoc entsperren enable/unlock Débloquer Uni Druckeinheit Pressure unit Unité de pressionou1 Ausgangs- Switching output Fonction de sortie 1 funktion 1 function 1SP1 Schaltpunkt 1 Switch point 1 Point de commutation 1SP2 Schaltpunkt 2 Switch point 2 Point de commutation 2rP1 Rückschaltpunkt 1 Release position 1 Point de déclenchement 1rP2 Rückschaltpunkt 2 Release position 2 Point de déclenchement 2ASP Startpunkt analog Analogue starting Point de début point analogiqueAEP Endpunkt analog Analogue Point de fi n end point analogiqueEF zusätzliche Extended Fonctions Funktionen functions supplémentairesHi Maximalwert- Max-value Mémoire valeur Speicher memory maximaleLo Minimalwert- Min-value Mémoire valeur Speicher memory minimaleCoF Offset Justage Offset correction Offset Justage dS1 Verzögerung SP1 Switch point delay SP1 Temporisation SP1dS2 Verzögerung SP2 Switch point delay SP2 Temporisation SP2 dr1 Verzögerung rP1 Release point delay rP1 Temporisation rP1dr2 Verzögerung rP2 Release point delay rP2 Temporisation rP2dAP Dämpfung Damping of Atténuation de la sortie Schaltausgang switching output de commutation dAA Dämpfung Damping of Atténuation de la Analogausgang analogue output sortie analogiqueP-n Verhalten/ Characteristics/ Comportement/ Schaltausgang Switching output Commutation de sortiediS Display- Display update Actualisation affi cheur AktualisierungrES zurück in den Reset to default Remise à l’état par Auslieferzustand settings défault SoF Software-Version Software version Version logiciel

PS…-LI2UPNPS…-LUUPN


PS…-…-LI2UPN8X-…PS…-…-LUUPN8X-…

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

!�

"��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

�

�

�

�

�

��

��

��

�� !"#

�� !"#

��#$��%��

�$��#$��%��

�$��!��!� ��

��

��

��

��

��


D101610 0108

*D101610ßß0108*... and more than 60 representatives and agencies world-wide. Subject to change without notice

TURCK WORLD-WIDE HEADQUARTERS

GERMANY Hans Turck GmbH & Co. KG Witzlebenstraße 7 45472 Mülheim an der Ruhr P. O. Box 45466 Mülheim an der Ruhr Tel. +49 208 4952-0 Fax +49 208 4952-264 E-Mail [email protected]

www.turck.com

BAHRAIN TURCK Middle East S.P. P.O. Box 18370 Manama - Kingdom of Bahrain Tel. +973 17 814920 Fax +973 17 814925 E-Mail [email protected]

BELGIUM Multiprox N. V. P. B. 71 Lion d’Orweg 12 9300 Aalst Tel. +32 53 766566 Fax +32 53 783977 E-Mail [email protected]

CZECH REPUBLIC TURCK s.r.o. Hradecká 1151 500 03 Hradec Králové 3 Tel. +420 49 5518-766 Fax +420 49 5518-767 E-Mail [email protected]

PR OF CHINA TURCK (Tianjin) Sensor Co. Ltd. 18,4th Xinghuazhi Road, Xiqing Economic Development Area, 300381 Tianjin Tel. +86 22 83988-188 83988-199 Fax +86 22 83988-111 E-Mail [email protected]

FRANCE TURCK BANNER S.A.S 3, Rue de Courtalin Magny-Le-Hongre 77703 Marne-La-Vallee Cedex 4 Tel. +33 1 6043-6070 Fax +33 1 6043-1018 E-Mail [email protected]

GREAT BRITAIN TURCK BANNER LIMITED Blenheim House Hurricane Way Wickford, Essex SS11 8YT Tel. +44 1268 578888 Fax +44 1268 763648 E-Mail [email protected]

HUNGARY TURCK Hungary kft. Könyves Kalman Krt.76 1087 Budapest Tel. +36 1 4770-740 Fax +36 1 4770-741 E-Mail [email protected]

INDIA TURCK India Automation Pvt Ltd. A-603/604, ICC Trade Towers, 6th Floor, Senapati Bapat Road, Pune - 411016, Maharashtra - India Tel. + 91 20 25630039 25630040 Fax + 91 20 25630040 E-Mail [email protected]

ITALY TURCK BANNER S. R. L. Via S.Domenico, 5 20010 Bareggio (MI) Tel. +39 02 90364-291 Fax +39 02 90364-838 E-Mail [email protected]

JAPAN TURCK Japan Corporation #202 MBD Bldg. 2F, 3-3-23, Minami-Aoyama, Minato-ku, 107-0062, Tokyo, Japan Tel. + 81 3 57722820 Fax + 81 3 34082571 E-Mail [email protected]

KOREA TURCK Korea Co. Ltd. Room No 406, Gyeonggi Technopark 1271-11, Sa 1-Dong, Sangnok-Gu, Ansan-city, Gyeonggi-Do, Korea Tel. +82 31 5004-555 Fax +82 31 5004-558 E-Mail [email protected]

MEXICO TURCK Mexico S. DE R.L. DE C.V. Carr. Saltillo-Zacatecas km 4.5 s/n Parque Industrial “La Angostura“ Saltillo, COAH. 25070 Tel. +52 844 4826-924 Fax +52 844 4826-926 E-Mail [email protected]

THE NETHERLANDS TURCK B. V. Postbus 297 8000 AG Zwolle Tel. +31 38 4227-750 Fax +31 38 4227-451 E-Mail [email protected]

POLAND TURCK sp.z o.o Zeromskiego 1 45-053 Opole Tel. +48 77 4434-800 Fax +48 77 4434-801 E-Mail [email protected]

ROMANIA TURCK Automation Romania SRL Str. luliu Tetrat nr. 18 Sector 1 011914 Bukarest Tel. +40 21 2300279 2300594 Fax +40 21 2314087 E-Mail: [email protected]

RUSSIA TURCK Rus O.O.O. Altufyevskoe shosse, 1/7 127106 Moskau Tel. +7 495 2342661 Fax +7 495 2342665 E-Mail [email protected]

SINGAPORE TURCK Singapore Pte. Ltd. 25 International Business Park #03-22/23 German Centre 609916 Singapore Tel. +65 65628716 Fax +65 65628719 E-Mail [email protected]

USA TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441-2656 Tel. +1 763 553-9224 553-7300 Fax +1 763 553-0708 E-Mail [email protected]

Documents

PS Manual 0108