SPREADERS - Sno-Way Intl. · » Pause button allows you to pause all functions and resume all functions » Auto mode feature » Well lit LCD screen with auger and spinner graph display

SP

REA

DER

SH

OM

E OF

INN

OVATI

ON

™

3 2

Sno-Way has an ice control product to �t your needs! Large or small,

Sno-Way spreaders are built to perform. Each Sno-Way spreader o�ers

unique, productivity-enhanced features not found on competitive

products. Features that help you get your job done fast and

e�ciently. No other spreader can provide you as much control

of the spread material as a Sno-Way spreader.

TOUGH. TESTED. PROVEN.

CHOOSING THE RIGHT SPREADER For Your Application.

Visit snoway.com for video, updates and so much more.

NON COMMERCIAL

LIGHT COMMERCIAL

COMMERCIAL

You're not in this for money. You plow your driveway, your mom's driveway, and help out the neighbors when it really piles up.

out to make some green. You probably have a few guys who work for you. Parking lots and driveways are the bulk of your business.

You're serious about plowing and at the top of your game. You have a full crew of hard-working plowers who

Together, you plow virtually everything except the roads.

Fits any truck with a 2” receiver


500 | 600 | 800

4-CU.-FT. SPREADER

6/9-CU.-FT. SPREADER

PDE SPREADER

3 2

Sno-Way has an ice control product to �t your needs! Large or small,

Sno-Way spreaders are built to perform. Each Sno-Way spreader o�ers

unique, productivity-enhanced features not found on competitive

products. Features that help you get your job done fast and

e�ciently. No other spreader can provide you as much control

of the spread material as a Sno-Way spreader.

TOUGH. TESTED. PROVEN.

CHOOSING THE RIGHT SPREADER For Your Application.


NON COMMERCIAL

LIGHT COMMERCIAL

COMMERCIAL

You're not in this for money. You plow your driveway, your mom's driveway, and help out the neighbors when it really piles up.

out to make some green. You probably have a few guys who work for you. Parking lots and driveways are the bulk of your business.

You're serious about plowing and at the top of your game. You have a full crew of hard-working plowers who

Together, you plow virtually everything except the roads.



500 | 600 | 800

4-CU.-FT. SPREADER


PDE SPREADER

• Spread materials can attract moisture and freeze, resulting in equipment damage. Always clean and empty all ice control material from the spreader when not in use.• Always match spreader gross weight capacities with the vehicle GVWR speci�cations.

• Bagged ice melters and calcium chloride are hygroscopic (attract moisture) and may become compacted when loaded into Sno-Way tailgate spreaders. The use of a vibrator kit may be required with these spread materials.• This chart is a GENERAL guideline. Always follow the recommended application directions for spread materials.

• Salt must be free-�owing to work in the tailgate spreaders. If salt is not free-�owing, replace it.

SELECTINGYour Sno-Way® Spreader

5 4

1

2

3

REVIEW SPREADERSReview all Sno-Way spreader models.

SPREADER MATERIALSno-Way spreaders are built to spread a variety of deicing material.

CHOOSE SPREADERWith your application vehicle, spread material and coverage in mind, choose the right spreaderfor your job site needs.

SPREADER MATERIAL GUIDEAlways follow the recommended application directions for spreader materials.

SODIUM CHLORIDE Rock SaltRecommended For Use With:• 4-Cu.-Ft. Tailgate Spreader (Shown)• 6-Cu.-Ft. Tailgate Spreader• 9-Cu.-Ft. Tailgate Spreader• PDE 800 | 600 | 500

CALCIUM CHLORIDE FlakeRecommended For Use With:• 4-Cu.-Ft. Tailgate Spreader• 6-Cu.-Ft. Tailgate Spreader (Shown)• 9-Cu.-Ft. Tailgate Spreader• PDE 800 | 600 | 500

BAGGED ICE MELTERS Free FlowingRecommended For Use With:• 4-Cu.-Ft. Tailgate Spreader• 6-Cu.-Ft. Tailgate Spreader• 9-Cu.-Ft. Tailgate Spreader (Shown)• PDE 800 | 600 | 500

5 CHOOSE ACCESSORIESSno-Way’s productivity-enhancing accessories helpyou get your deicing job done fast! See page 14 foravailable spreader options.

SPREADER 40 Lb. Bag 80 Lb. Bag

4 CU.FT. 7.5 Bags 3.5 Bags




4 CHOOSE CONTROLChoose wired or wireless variable speed controlor on o control for your tailgate spreader.

SAND Wet or Dry

PEA GRAVEL 50/50 SALT SAND BULK SALTWet or Dry

MAGIC SALT

Recommended For Use With:• PDE 800 | 600 | 500

• Spread materials can attract moisture and freeze, resulting in equipment damage. Always clean and empty all ice control material from the spreader when not in use.• Always match spreader gross weight capacities with the vehicle GVWR speci�cations.

• Bagged ice melters and calcium chloride are hygroscopic (attract moisture) and may become compacted when loaded into Sno-Way tailgate spreaders. The use of a vibrator kit may be required with these spread materials.• This chart is a GENERAL guideline. Always follow the recommended application directions for spread materials.

• Salt must be free-�owing to work in the tailgate spreaders. If salt is not free-�owing, replace it.

SELECTINGYour Sno-Way® Spreader

5 4

1

2

3

REVIEW SPREADERSReview all Sno-Way spreader models.

SPREADER MATERIALSno-Way spreaders are built to spread a variety of deicing material.

CHOOSE SPREADERWith your application vehicle, spread material and coverage in mind, choose the right spreaderfor your job site needs.

SPREADER MATERIAL GUIDEAlways follow the recommended application directions for spreader materials.

SODIUM CHLORIDE Rock SaltRecommended For Use With:• 4-Cu.-Ft. Tailgate Spreader (Shown)• 6-Cu.-Ft. Tailgate Spreader• 9-Cu.-Ft. Tailgate Spreader• PDE 800 | 600 | 500

CALCIUM CHLORIDE FlakeRecommended For Use With:• 4-Cu.-Ft. Tailgate Spreader• 6-Cu.-Ft. Tailgate Spreader (Shown)• 9-Cu.-Ft. Tailgate Spreader• PDE 800 | 600 | 500

BAGGED ICE MELTERS Free FlowingRecommended For Use With:• 4-Cu.-Ft. Tailgate Spreader• 6-Cu.-Ft. Tailgate Spreader• 9-Cu.-Ft. Tailgate Spreader (Shown)• PDE 800 | 600 | 500

5 CHOOSE ACCESSORIESSno-Way’s productivity-enhancing accessories helpyou get your deicing job done fast! See page 14 foravailable spreader options.

SPREADER 40 Lb. Bag 80 Lb. Bag





4 CHOOSE CONTROLChoose wired or wireless variable speed controlor on o control for your tailgate spreader.

SAND Wet or Dry

PEA GRAVEL 50/50 SALT SAND BULK SALTWet or Dry

MAGIC SALT

Recommended For Use With:• PDE 800 | 600 | 500

SPREADER FEATURES

» The PDE family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support.

» The easy on/o� stainless steel and roto molded chute has a 16” four �ute poly spinner to provide you long life andsuperior spread pattern up to 30’.

» The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.

» The inside of the poly hopper walls are designed for maximum �ow of the toughest materials to minimize material bridging.

» One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.

» Adjustable inverted vee. Use PDE controller (see page 11) to adjust inverted vee system to match the material you want to spread.

JAM RELEASE MECHANISMJams can happen, even with the best spreaders. This device is a life saver keeping you from digging out the hopper. Simply insert this into the end of the Auger Shaft and the use of a simple ratchet wrench and you are back in business. For use on the PDE series spreaders.

CAN USE

» Sodium chloride» Calcium chloride » Bagged ice melters» Bulk salt – wet or dry

» 50/50 salt sand» Sand – wet or dry» Pea gravel» Magic salt

11 10


The Poly Dual Electric V-Box Spreaders are built for the professional snow and ice removal specialist. The Poly Dual Electric spreaders use a heavy duty 1/2 horsepower electric motor, direct drive gear box to run the auger and a 1/3 horsepower electric motor, direct drive gear box to run the spinner. The Poly Hopper is mounted on an all stainless steel frame and drive support to give you a spreader that will provide you years of service. Sno-Way is known for having the best spread pattern in the industry and the Sno-Way PDE’s will NOT disappoint.

PDE SPREADERS

Shown with 16" chuteShSS own with 16" chutett

PDE 600 PDE 500

SWS 30SALT WETTING SYSTEM

CONTROLLER

SWS 30 FEATURES» Supported by stainless steel frame

» Custom designed �t to the Sno-Way PDE V-Box Spreader

» 12 Volt DC motor

» Can use on/o� switch or in cab control that handles all spreader functions

» Quick disconnect couplers for easy use on spreader chute

» Accelerates melting process

» Reduces amount of salt needed

CAN USE

» Salt Brine

» Calcium Chloride Brine

» Premium Branded Liquids

AFS5

» Automated �lling station

» 5 gallons per minute

» AC system plugs into standard outlet» No back breaking �lling process» Minimal assembly required

Sno-Way’s PDE V-Box Control is custom designed to work for hard-working contractors.

The intuitive design of the control allows the professional snowand ice removal expert to gain an advantage over competitors. Contractors that use the new PDE series V-Box spreaders are able to save time, reduce wasted material and get the job done with greater pro�t.

No more guessing – simple buttons for the variable speed auger control allow for a wide range of speed settings. The control will monitor the amount of material that �ows out of the spreader.

Paired with the auger speed, the plower will have precision control to increase or decrease spinner speed. The command of these two variables is now easier than ever, and results in great savings.

KEY FEATURES» Simple buttons and controls» Easy to use and understand» Increase/decrease auger independently» Increase/decrease spinner independently» Turn on and o�» Turn light on and o� (auxiliary light is optional on PDE)» Turn on and o� wetting system (wetting system optional on PDE)» Turn on and o� vibrator» Pause button allows you to pause all functions and resume all functions» Auto mode feature» Well lit LCD screen with auger and spinner graph display

See snoway.com for spreading videos and new spreading materials.

Always follow recommended application for spreader materials.

SPREADER FEATURES


» The easy on/o� stainless steel and roto molded chute has a 16” four �ute poly spinner to provide you long life andsuperior spread pattern up to 30’.

» The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.

» The inside of the poly hopper walls are designed for maximum �ow of the toughest materials to minimize material bridging.

» One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.

» Adjustable inverted vee. Use PDE controller (see page 11) to adjust inverted vee system to match the material you want to spread.


CAN USE

» Sodium chloride» Calcium chloride » Bagged ice melters» Bulk salt – wet or dry

» 50/50 salt sand» Sand – wet or dry» Pea gravel» Magic salt

11 10


The Poly Dual Electric V-Box Spreaders are built for the professional snow and ice removal specialist. The Poly Dual Electric spreaders use a heavy duty 1/2 horsepower electric motor, direct drive gear box to run the auger and a 1/3 horsepower electric motor, direct drive gear box to run the spinner. The Poly Hopper is mounted on an all stainless steel frame and drive support to give you a spreader that will provide you years of service. Sno-Way is known for having the best spread pattern in the industry and the Sno-Way PDE’s will NOT disappoint.

PDE SPREADERS

Shown with 16" chuteShSS own with 16" chutett

PDE 600 PDE 500

SWS 30SALT WETTING SYSTEM

CONTROLLER

SWS 30 FEATURES» Supported by stainless steel frame

» Custom designed �t to the Sno-Way PDE V-Box Spreader

» 12 Volt DC motor

» Can use on/o� switch or in cab control that handles all spreader functions

» Quick disconnect couplers for easy use on spreader chute

» Accelerates melting process

» Reduces amount of salt needed

CAN USE

» Salt Brine

» Calcium Chloride Brine

» Premium Branded Liquids

AFS5

» Automated �lling station

» 5 gallons per minute

» AC system plugs into standard outlet» No back breaking �lling process» Minimal assembly required

Sno-Way’s PDE V-Box Control is custom designed to work for hard-working contractors.

The intuitive design of the control allows the professional snowand ice removal expert to gain an advantage over competitors. Contractors that use the new PDE series V-Box spreaders are able to save time, reduce wasted material and get the job done with greater pro�t.




See snoway.com for spreading videos and new spreading materials.

Always follow recommended application for spreader materials.

* Empty unit weight. Chute not included in weight.

4-CU.-FT. SPREADER

4-Cu.-Ft.

95 lbs.

34”

38”

25.75"

1/3 HP

12" Diameter

RECEIVER SPREADER Sno-Way 4Spreader Capacity

Weight*

Height

Width

Depth

Motor (1/3 HP 12V Electric DC - Double Sealed)

Spinner - 4 Flights (High Grade Polyethylene)

» Flow Control Paddle (Lockable) - Positive Close to Full Open

» Impact Resistant Nylon Roller Wheels (Patent Pending)

» UV Resistant Dual Wall Hopper Frame (Patent Pending)

» Powder-Coated Steel Channel Construction Frame Support

» Class III Tapered Receiver Hitch Mount» Choose Wired or Wireless

Variable Speed Control or On/O� control

RECEIVER SPREADERSpreader Capacity

Weight*

Height

Width

Depth

Motor (12V Electric DC - High Rear Mount)


6-Cu.-Ft.

115 lbs.

43”

40”

20"

1/3 HP

12" Diameter



» UV Resistant Polyethylene Hopper

» Powder-Coated Steel Tube / Plate Frame Construction

» Class III Tapered Receiver Hitch Mount


PDE SPREADER

2 Yards

35” High x 47” Wide x 91” Long

16” Short Chute 29” Long Chute

Easy On/O

3” Diameter

16” Diameter Poly Four Flute

12 Volt

1/2 HP, 14.1 Gear Ratio

1/3 HP, 8.1 Drive

Standard

Standard (Stainless Steel)

Stainless Steel

Standard (E-Coat Paint)

Standard

360 lbs.

Dual With Amp Draw Protection

Reversing Jam Protection

Optional

Optional

Optional

PDE 800 PDE 600

Capacity

Hopper Size

Chute

Chute

Drive Auger

Spinner

Motors

Auger Drive Gear Box Motor

Spinner Drive Gear Box Motor

Vibrator

Inverted Vee

Frame

Top Screen

Tie Down Brackets

Weight*

Control

Tarp

Auxiliary Light Kit

Ratchet Straps

PDE 500

.75 Yards



Easy On/O

3” Diameter


12 Volt


1/3 HP, 8.1 Drive

Standard


Stainless Steel


Standard

244 lbs.



Optional

Optional

Optional

.5 Yards



Easy On/O

3” Diameter


12 Volt


1/3 HP, 8.1 Drive

Standard


Stainless Steel


Standard

215 lbs.



Optional

Optional

Optional

9-Cu.-Ft.

140 lbs.

46”

43”

24"

1/3 HP

12" Diameter

Sno-Way 6 Sno-Way 9

ROTO MOLDED POLY HOPPER SPREADER


» T roto molded chute has a 16” ovide you long life and superior spread pattern up to 30’.

» The 1/2 horsepower direct drive gear box with a 14.1 gear ratio provides a perfect balance of auger power and amp draw, coupled with a direct drive 1/3 horsepower spinner motor, and a dual control controller, gives you complete control when dispensing materials.

» The inside of the poly hopper walls are designed

minimize material bridging.

NON COMMERCIAL

LIGHT COMMERCIAL

COMMERCIAL

CONTROLLERS

The intuitive design of the control allows the professional snow and ice removal expert to gain an advantage over competitors. Contractors that use the new PDE series V-Box spreaders are able to save time, reduce wasted material and get the job done with greater pro�t.




Sno-Way’s Variable Speed Control for tailgate spreaders is packed with features that help you get the job done on time and at the right cost. E�ciency is the key when spreading salt, and a superior control is the secret to greater e�ciency. The Variable Speed Control has an ergonomic design that allows for simple usage in your right or left hand. Action buttons are all within simplereach, and intuitive so you can be in control without even looking at the control.

The Variable Speed Control is available in a wired or wireless con�guration – your choice depending on operator and vehicle variables. Features include solid construction, simple speed control with lit speed indicators, and push button control to turn the vibrator on and o�.

KEY FEATURES» Wired» Wireless» Simple to use» On/o� vibrator» Increase/decrease speed» Lights to show speed

» Choose Wired or Wireless Variable Speed Control or On/O� control

VARIABLE SPEED CONTROL

PDE CONTROL

g p

On/O� control also available for the Sno-Way Tailgate Spreaders.

13 12


* Empty unit weight. Chute not included in weight.

4-CU.-FT. SPREADER

4-Cu.-Ft.

95 lbs.

34”

38”

25.75"

1/3 HP

12" Diameter

RECEIVER SPREADER Sno-Way 4Spreader Capacity

Weight*

Height

Width

Depth

Motor (1/3 HP 12V Electric DC - Double Sealed)




» UV Resistant Dual Wall Hopper Frame (Patent Pending)

» Powder-Coated Steel Channel Construction Frame Support

» Class III Tapered Receiver Hitch Mount» Choose Wired or Wireless

Variable Speed Control or On/O� control

RECEIVER SPREADERSpreader Capacity

Weight*

Height

Width

Depth

Motor (12V Electric DC - High Rear Mount)


6-Cu.-Ft.

115 lbs.

43”

40”

20"

1/3 HP

12" Diameter



» UV Resistant Polyethylene Hopper

» Powder-Coated Steel Tube / Plate Frame Construction

» Class III Tapered Receiver Hitch Mount


PDE SPREADER

2 Yards



Easy On/O

3” Diameter


12 Volt


1/3 HP, 8.1 Drive

Standard


Stainless Steel


Standard

360 lbs.



Optional

Optional

Optional

PDE 800 PDE 600

Capacity

Hopper Size

Chute

Chute

Drive Auger

Spinner

Motors

Auger Drive Gear Box Motor

Spinner Drive Gear Box Motor

Vibrator

Inverted Vee

Frame

Top Screen

Tie Down Brackets

Weight*

Control

Tarp

Auxiliary Light Kit

Ratchet Straps

PDE 500

.75 Yards



Easy On/O

3” Diameter


12 Volt


1/3 HP, 8.1 Drive

Standard


Stainless Steel


Standard

244 lbs.



Optional

Optional

Optional

.5 Yards



Easy On/O

3” Diameter


12 Volt


1/3 HP, 8.1 Drive

Standard


Stainless Steel


Standard

215 lbs.



Optional

Optional

Optional

9-Cu.-Ft.

140 lbs.

46”

43”

24"

1/3 HP

12" Diameter

Sno-Way 6 Sno-Way 9

ROTO MOLDED POLY HOPPER SPREADER


» T roto molded chute has a 16” ovide you long life and superior spread pattern up to 30’.

» The 1/2 horsepower direct drive gear box with a 14.1 gear ratio provides a perfect balance of auger power and amp draw, coupled with a direct drive 1/3 horsepower spinner motor, and a dual control controller, gives you complete control when dispensing materials.

» The inside of the poly hopper walls are designed

minimize material bridging.

NON COMMERCIAL

LIGHT COMMERCIAL

COMMERCIAL

CONTROLLERS

The intuitive design of the control allows the professional snow and ice removal expert to gain an advantage over competitors. Contractors that use the new PDE series V-Box spreaders are able to save time, reduce wasted material and get the job done with greater pro�t.




Sno-Way’s Variable Speed Control for tailgate spreaders is packed with features that help you get the job done on time and at the right cost. E�ciency is the key when spreading salt, and a superior control is the secret to greater e�ciency. The Variable Speed Control has an ergonomic design that allows for simple usage in your right or left hand. Action buttons are all within simplereach, and intuitive so you can be in control without even looking at the control.

The Variable Speed Control is available in a wired or wireless con�guration – your choice depending on operator and vehicle variables. Features include solid construction, simple speed control with lit speed indicators, and push button control to turn the vibrator on and o�.

KEY FEATURES» Wired» Wireless» Simple to use» On/o� vibrator» Increase/decrease speed» Lights to show speed

» Choose Wired or Wireless Variable Speed Control or On/O� control

VARIABLE SPEED CONTROL

PDE CONTROL

g p

On/O� control also available for the Sno-Way Tailgate Spreaders.

13 12


HIGH PERFORMANCE TOUCH-UPSPRAY PAINT (BLACK, SILVER OR YELLOW)

Sno-Way touch-up paint is custom matched to help conceal chips and scrapes and to protect your original Sno-Way equipment from corrosion. All colors are available in 12-oz. aerosol cans.

ANTI-CORROSION COMPOUND (1.25/3 FL.OZ.) Sno-Way’s non-conductive compound e�ectively seals against dirt and moisture and provides maximum protection to electrical switches and contacts. Sno-Way recommends liberal compound application to all exposed electrical components for extended wear life. Tube includes a 1"- wide hang hole for convenient shop storage.

VIBRATOR MOTOR KITThe vibrator motor easily bolts to Sno-Way’s 4, 6, or 9 Cu.-Ft. poly hoppers. The motor provides consistant agitation of spread material for superior �ow to the receiver spreader spinner. Each motor ships with complete mount hardware.

SPREADER AUXILIARY POWER HARNESS Sno-Way’s auxillary power harness allows you to easily connect additional spreader accessories to the installed spreader harness on the vehicle without splicing wires. Fast and simple, this harness installs in seconds!

UNIVERSAL SPREADER LIGHT KITSno-Way’s universal spreader light conveniently mounts to your spreader and supplies excellent illumination for increased visibility during early morning or night salting applications. Includes mount hardware and easy plug and go circuitry. Use with all Receiver and PDE spreaders.

SNO-WAY® PDE SPREADER COVERIdeal for keeping precipitation from reaching spreader material in the hopper. This Roll Back Retain in Place Cover is a retractable cover that is integrated into the hopper, the cover rolls up and is stowed on the spreader. The cover is durable, reinforced vinyl, and includes dual shock cords with plastic attachment hooks, industrial –strength hem stitching and reinforced corner seams and grommets.

2” NYLON RATCHET STRAP KITSafely secure your PDE spreader to the work truck with these 2”-wide nylon webbing ratchet straps. These straps have a working load limit of 3,000 pounds each. The minimum break strength rating is 3X the working load limit. Each kit includes four yellow straps. Recommended for use with Sno-Way PDE spreader models.


SWS 30 SALT WETTING SYSTEMSee page 11 for more details.

ACCESSORIES designed to �t your spreader.

14

Engineered by Sno-Way for maximum performance and perfect �t, factory – original Sno-Way parts and accessories put your spreader into productivity overdrive. Sno-Way has the tools to help you get your job done fast.

15


HIGH PERFORMANCE TOUCH-UPSPRAY PAINT (BLACK, SILVER OR YELLOW)

Sno-Way touch-up paint is custom matched to help conceal chips and scrapes and to protect your original Sno-Way equipment from corrosion. All colors are available in 12-oz. aerosol cans.

ANTI-CORROSION COMPOUND (1.25/3 FL.OZ.) Sno-Way’s non-conductive compound e�ectively seals against dirt and moisture and provides maximum protection to electrical switches and contacts. Sno-Way recommends liberal compound application to all exposed electrical components for extended wear life. Tube includes a 1"- wide hang hole for convenient shop storage.

VIBRATOR MOTOR KITThe vibrator motor easily bolts to Sno-Way’s 4, 6, or 9 Cu.-Ft. poly hoppers. The motor provides consistant agitation of spread material for superior �ow to the receiver spreader spinner. Each motor ships with complete mount hardware.

SPREADER AUXILIARY POWER HARNESS Sno-Way’s auxillary power harness allows you to easily connect additional spreader accessories to the installed spreader harness on the vehicle without splicing wires. Fast and simple, this harness installs in seconds!

UNIVERSAL SPREADER LIGHT KITSno-Way’s universal spreader light conveniently mounts to your spreader and supplies excellent illumination for increased visibility during early morning or night salting applications. Includes mount hardware and easy plug and go circuitry. Use with all Receiver and PDE spreaders.

SNO-WAY® PDE SPREADER COVERIdeal for keeping precipitation from reaching spreader material in the hopper. This Roll Back Retain in Place Cover is a retractable cover that is integrated into the hopper, the cover rolls up and is stowed on the spreader. The cover is durable, reinforced vinyl, and includes dual shock cords with plastic attachment hooks, industrial –strength hem stitching and reinforced corner seams and grommets.

2” NYLON RATCHET STRAP KITSafely secure your PDE spreader to the work truck with these 2”-wide nylon webbing ratchet straps. These straps have a working load limit of 3,000 pounds each. The minimum break strength rating is 3X the working load limit. Each kit includes four yellow straps. Recommended for use with Sno-Way PDE spreader models.


SWS 30 SALT WETTING SYSTEMSee page 11 for more details.

ACCESSORIES designed to �t your spreader.

14

Engineered by Sno-Way for maximum performance and perfect �t, factory – original Sno-Way parts and accessories put your spreader into productivity overdrive. Sno-Way has the tools to help you get your job done fast.

15


SP

REA

DER

S

SOLD AND SERVICED BY:

www.snoway.com

www.snoway.comSee how SNO-WAY® continues to lead Innovation.More info, watch videos, �nd a dealer, contact us.

V-BOX SPREADER Spreader Capacity (Cu.-Yd.)

Height/Width

Length

Weight - Including Chute*

Material (Gauge Steel)

Conveyor Width (Overall)

Chain Width (Pintle Type)

Swing-Away Chute Design

Spinner - 4 Flights (Mild or SS)

0.5

26” / 38“

79”

468 lbs.

14 SS

11”

10”

16”

14" Diameter

0.75

26” / 38“

91”

560 lbs.

14 SS

11”

10”

16”

14" Diameter

1.5

28” / 48“

115”

650 lbs.

14 SS

16”

15”

16” / 28“

14" Diameter

1.5

28” / 48“

115”

600 lbs.

16 Mild

16”

15”

16” / 28“

14" Diameter

V-BOX SPREADER Spreader Capacity (Cu.-Yd.)

Height/Width

Length

Weight - Including Chute*

Material (Gauge Steel)

Conveyor Width (Overall)

Chain Width (Pintle Type)

Swing-Away Chute Design

Spinner - 4 Flights (Mild or SS)

0.75

26” / 9“

91”

575 lbs.

14 SS

11”

10”

16”

14" Diameter

2

33” / 48“

115”

760 lbs.

14 SS

16”

15”

16” / 28“

14" Diameter

» One-Piece Side & Sill Body Construction-Full Bracing Side Support

» 45° Free-Flow Sides with Center Balance Lift Hooks

» Electric Motor: 1/2 HP 30-Amp No Load, 40-Amp Start

» Conveyor Crossbars: 3/16" x 3/4" (5EVSS-6EVSS), 1/4" x 1" (8EVSS-8EVBSS)

» Conveyor Pintle Chain Strength: 12,500 lbs. Tensile

» Drive Bearings: Two Take-Up Mounted To Idler Roller • Worm Gear 50:1 WGDB

» Drive Mechanism: Direct Drive 1" Diameter Shaft • Ext. Zerk Fittings On All Bearings

» External Chute Material De¦ectors: 3 Adjustable

» ON/OFF Control: 25-Amp Overload • Quick Disconnect Cab & Engine Harness

» One-Piece Side & Sill Body Construction-Full Bracing Side Support

» 45° Free-Flow Sides with Center Balance Lift Hooks

» Gas Engine: 6 HP Briggs (6' Models), 10.5 HP Briggs or 11 HP Honda (All Others)

» Conveyor Crossbars: 3/16" x 3/4" (6SVSS & 8VSS), 1/4" x 1" (8V-10VSS)

» Conveyor Pintle Chain Strength: 12,500 lbs. Tensile

» Drive Bearings: Two Take-Up Mounted To Idler Roller • Worm Gear 20:1 WGDB

» Drive Mechanism: Direct Drive 1" Diameter Shaft • Ext. Zerk Fittings On All Bearings

» External Chute Material De¦ectors: 3 Adjustable

» Variable Speed Control: Burst Mode, Quick Disconnect Cab & Engine Harness, Cigarette Auxiliary Power

ELECTRIC V-BOX SPREADER GAS V-BOX SPECIFICATIONS

5EVSS 6EVSS 8EVSS 8EVBSS 6VSS 8VSS

COMMERCIAL HEAVY DUTY

*Empty unit weight. **Weather and pavement surface conditions can e�ect spread width.

SPREADER DISTANCE AND DENSITY

FLOW

10'

20'

30'

ELECTRIC V-BOX** Spreader up to 30’

GAS V-BOX** Spreader up to 40’

40'

Gate Fold

STANDARD LIMITED WARRANTIES For complete warranty terms for products sold by Sno-Way, please refer to the limited warranty information that accompanies each product, visit www.snoway.com or contact your authorized Sno-Way Retailer.

LEGAL STATEMENT VEHICLES INTENDED TO BE EQUIPPED WITH A SNOW PLOW AND/OR SPREADER MUST BE IN COMPLIANCE WITH THE VEHICLE MANUFACTURERS’ SPECIFICATIONS FOR EQUIPMENT APPLICATION. SNO-WAY INTERNATIONAL, INC. RESERVES THE RIGHT TO CHANGE PRODUCT DESIGN, CONSTRUCTION, MATERIALS AND SPECIFICATIONS WITHOUT NOTICE UNDER ITS ONGOING PRODUCT IMPROVEMENT PROGRAMS.

Sno-Way Snow and Ice Control Equipment are protected by numerous U.S. and foreign patents with other patents pending. All other trademarks and registered trademarks are the property of their respective owners. © 2016 Sno-Way International, Inc. All rights reserved. Litho in USA. 10-16 P/N 97107053

Documents

SPREADERS - Sno-Way Intl. · » Pause button allows you to pause all functions and resume all functions » Auto mode feature » Well lit LCD screen with auger and spinner graph display