299
SETUP MANUAL Programmable Terminals NT31 and NT31C Cat. No. V062-E1-03

V062 E1 03 NT31 NT31C Setup Manual

Embed Size (px)

Citation preview

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    1/299

    SETUP MANU

    Programmable Term

    NT31 and NT31C

    Cat. No. V062-E1-03

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    2/299

    NT31and NT31C

    Programmable TerminalsSetup Manual

    Revised June 2004

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    3/299

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    4/299

    !

    !

    !

    Notice:OMRON products are manufactured for use according to proper procedureand only for the purposes described in this manual.

    The following conventions are used to indicate and classify precautions in tthe information provided with them. Failure to heed precautions can result i

    age to property.

    DANGER Indicates an imminently hazardous situation which, if not avoserious injury.

    WARNING Indicates a potentially hazardous situation which, if not avoideserious injury.

    Caution Indicates a potentially hazardous situation which, if not avoidmoderate injury, or property damage.

    OMRON Product ReferencesAll OMRON products are capitalized in this manual. The word Unit is alsoto an OMRON product, regardless of whether or not it appears in the prope

    The abbreviation Ch, which appears in some displays and on some OMROword and is abbreviated Wd in documentation in this sense.

    Visual AidsThe following headings appear in the left column of the manual to help you

    information.

    Note Indicates information of particular interest for efficieof the product.

    1, 2, 3... 1. Indicates lists of one sort or another, such as p

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    5/299

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    6/299

    TABLE OF CONTENTS

    PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    2 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    SECTION 1General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-1 Role and Operation of the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-2 Functions of the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-3 System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-4 Communications with the Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Communications Using Memory Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-6 Before Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    SECTION 2Preparing for Connection . . . . . . . . . . . . . . . . . . . .

    2-1 Method for Connection to the Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    2-2 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    SECTION 3Hardware Settings and Connections . . . . . . . . . . .

    3-1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-2 Connecting to the Support Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-3 Connecting a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-4 Connecting a Bar Code Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-5 Using a Memory Unit (-VVersions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-6 Using a Memory Unit (Versions without the -VSuffix) . . . . . . . . . . . . . . .

    SECTION 4Connecting to the Host from the RS-232C Port . .

    4-1 Connecting to the RS-232C Port at the Host . . . . . . . . . . . . . . . . . . . . . . . . . .

    SECTION 5Connecting to the Host from the RS-422A/485 Port

    5-1 Connecting to the Hosts RS-232C Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    5-2 Connecting to the Hosts RS-422A/485 Port . . . . . . . . . . . . . . . . . . . . . . . . . .

    SECTION 6System Menu Operation . . . . . . . . . . . . . . . . . . . . .

    6-1 System Menu Operation Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    6-2 Starting the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    6 3 Operation Modes and the System Menu

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    7/299

    TABLE OF CONTENTS

    SECTION 7Troubleshooting and Maintenance . . . . . . . . . . . . .

    7-1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    7-2 Responding to Displayed Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    7-3 Maintenance of the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    7-4 Inspection and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    AppendicesA Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    B Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    C Using an RS-232C/RS-422A Convertor Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . D Transporting and Storing the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    E Making the Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    F Making the Cable for Connecting a PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    G Making the Cable for Connection to a Bar Code Reader . . . . . . . . . . . . . . . . . .

    H Making the Cable for Connection to a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . .

    I Relationship between System Program and Hardware . . . . . . . . . . . . . . . . . . . .

    J Model List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    K Option List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    8/299

    About this Manual:

    This manual describes connecting the NT-series NT31 and NT31C Program(Programmable Controller) or other host and peripheral devices and the settintions and applications. It includes the sections described below.

    Please read this manual carefully and be sure you understand the informationto install and operate the Programmable Terminal.

    Section 1provides fundamental information about the functions and featurestion, communication methods, etc. This information will enable you to unders

    PTs.

    Section 2describes the connection methods that are possible with the PTs, aof PTs, as the required knowledge before connecting to the host and to the

    Section 3describes the settings of the PTs and methods for connection to

    Section 4describes the method for connecting to the host using the RS-23

    Section 5describes the method for connecting to the host using the RS-42

    Section 6describes the operation of the System Menu, focusing on the proc

    tions that are convenient when using the PT and those that are useful for syexplained here.

    Section 7describes the action to take when errors occur in the PT, and how toinspection to prevent the occurrence of errors.

    The Appendicesprovide specifications, dimensions, procedures for using a

    vertor Unit, procedures for transporting and storing the PT, information on caon the relationship between the system program and hardware, and produc

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    9/299

    Related Manuals:

    Related manuals are listed below.

    The symbol at the end of the catalog number is t

    Connecting and Setting Up the Programmable Terminal

    NT31 and NT31C PT Setup Manual (V062-E1-

    This manual describes connecting the Programma

    peripheral devices and settings required for commu

    The functions and actual operating methods for the

    provided in the Reference Manual(V064-E1-).

    Programmable Terminal Functions and Operation

    NT31/31C/631/631C PT Reference Manual (V06

    This manual is used for any of the following PTs: N

    NT631C. It describes screen configurations, part fu

    ods, and other application information.

    PT connection and setup procedures are described

    Setup Manual (V062-E1-).

    Creating and Transferring Screen Data, and Installing the System Program

    NT-series Support Tool for Windows Ver. 4.1 Ope

    The screens displayed on the NT31 and NT31C PTs

    Tool and transferred to the PT. This manual describe

    screen data. It also describes how to download a sys

    the System Installer.

    The NT-series Support Tool for Windows is normal

    Support Tool.

    Connecting to Controllers Not Made by OMRON

    PLC Connection Manual (V042-E1-)

    The NT31 and NT31C PTs can be connected to co

    ries: Mitsubishi A Series and FX Series. This manu

    and setup methods for these controllers.

    The NT-series Support Tool for Windows Version 4.

    NT31 and NT31C PTs to these controllers.

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    10/299

    P

    This section provides general precautions for using the Programmable Terminal.

    The information contained in this section is important for the safe and reliable applicatio

    minal. You must read this section and understand the information contained before attem

    Programmable Terminal.

    1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    2 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    11/299

    !

    !

    Safety Precautions

    1 Intended AudienceThis manual is intended for the following personnel, edge of electrical systems (an electrical engineer o

    Personnel in charge of introducing FA systems in Personnel in charge of designing FA systems.

    Personnel in charge of installing and connecting

    Personnel in charge of managing FA systems an

    2 General PrecautionsThe user must operate the product according to the

    described in the operation manuals.Before using the product under conditions which areor applying the product to nuclear control systems

    systems, vehicles, combustion systems, medical echines, safety equipment, and other systems, mamay have a serious influence on lives and propertyyour OMRON representative.

    Make sure that the ratings and performance charasufficient for the systems, machines, and equipmentsystems, machines, and equipment with double sa

    This manual provides information for using the Progto read this manual before attempting to use the sofclose at hand for reference during operation.

    WARNING It is extremely important that Programmable Terminused for the specified purpose and under the specif

    applications that can directly or indirectly affect hu

    with your OMRON representative before applying Pthe above-mentioned applications.

    WARNING Do not use input functions such as PT touch switcdanger to human life or serious damage is possiblapplications.

    3 Safety PrecautionsRead these safety precautions carefully and makebefore using the Programmable Terminal so that yorectly.

    Safety Conventionsandtheir Meanings

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    12/299

    Safety Precautions

    WARNING

    Do not attempt to take the unit apart and do not t

    internal parts while the power is being supplied. Dthese may result in electrical shock.

    WARNING

    Switch OFF the NT31/NT31C power before repbacklight. Otherwise you could sustain an elect

    CAUTION

    Do not touch the backlight immediately after swthe power supply.

    Otherwise burn injuries may result due to the htemperatures.

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    13/299

    This section provides fundamental information about the functions and features of the PTs, typ

    tion methods, etc. This information will enable you to understand the applications of the PT

    1-1 Role and Operation of the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-1-1 Operation of an NT31/NT31C at an FA Production Site . . . . . . . . . . .

    1-1-2 Operations of the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-2 Functions of the NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-2-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2-2 Comparison between NT31 and NT31C . . . . . . . . . . . . . . . . . . . . . . .

    1-2-3 Additional Functions of the V2 Versions . . . . . . . . . . . . . . . . . . . . . . .

    1-2-4 Comparison between NT30/NT30C and NT31/NT31C . . . . . . . . . . .

    1-2-5 Principal Functions of NT31/NT31C . . . . . . . . . . . . . . . . . . . . . . . . .

    1-2-6 Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-3 System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-3-1 Peripheral Devices That Can Be Connected . . . . . . . . . . . . . . . . . . . .

    1-3-2 Connecting to the Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Communications with the Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-4-1 Direct Connection Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-4-2 Host Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-4-3 NT Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-4-4 Connecting to other Companies PLCs . . . . . . . . . . . . . . . . . . . . . . . .

    1-5 Communications Using Memory Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-5-1 Memory Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    1-5-2 Comparison between Direct Connection and Memory Link . . . . . . . .1-5-3 Memory Link Online Transfer Function . . . . . . . . . . . . . . . . . . . . . . .

    1-6 Before Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    14/299

    Role and Operation of the NT31/NT31C

    1-1 Role and Operation of the NT31/NT31C

    The NT31/NT31C is a sophisticated display unit (proautomatically displays information and can also be

    necessary. The following gives a general descriptionthe NT31/NT31C for those using a programmable te

    1-1-1 Operation of an NT31/NT31C at an FA Production

    The NT31/NT31C displays real-time information abment operating status, etc. Its power of expression other visuals, making the displays easy to understa

    Production Control (3)

    Product

    % achieved

    Todays target 560 441

    Current production 305 275

    Number defective 2 8

    Number repaired 7 15

    The NT31/NT31C warns of system or equipment fapropriate remedial action.

    AlarmAssembly line B

    Positioning pin

    is defective. Line stopped.

    Check the following.

    1. Defective pin L3

    2. Position of dog M2

    3. Mounting of photosensor P5

    Setting touch switches on the NT31/NT31C a

    NT31/NT31C as an operating panel; the results omitted to the host.

    Production Line StatusMonitoring

    Directions to Workers onthe Shop Floor

    Panel Switch Functions

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    15/299

    Role and Operation of the NT31/NT31C

    1-1-2 Operations of the NT31/NT31C

    The information to be displayed (screen data) can being the Support Tool and stored in the NT31/NT31

    displayed on the NT31/NT31C in response to instrucswitch operation.

    The screen datainstructions from

    switch operatio

    The NT31/NT31C can be connected to the host by a

    ceive necessary data from the host.

    Host link, NT link

    Data input using the touch panel (switch ON/OFFcharacter strings) can be transmitted to the host.

    Touch panel

    O

    d

    The screen data to be displayed on the NT31/NT31sonal computer using the Support Tool. Connect th

    Displays Screens

    Receives Data from aHost

    Sends Data to a Host

    Screen Data

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    16/299

    Functions of the NT31/NT31C

    1-2 Functions of the NT31/NT31CThe NT31/NT31C has the following features.

    1-2-1 FeaturesDownsized Body

    Slim body (50 mm or less in the panel*).

    The communication cable connectors are housed iprotrude from the unit.

    * When mounted in a panel of the recommended thick

    Construction Best Suited to the FA Environment The panel is an STN monochrome LCD type with b

    STN color LCD type with backlight for the NT31C

    The backlight unit and battery can be replaced at

    Waterproofed equivalent to the NEMA4 standard* The panel may not be usable in environments where

    periods.

    POWER

    RUN

    320 dots

    240 dots

    Wide angle of visibility

    Contrast and brightness are adjustable by touch sw

    Compatibility with Other PTs There is upward compatibility between the NT3

    models for screen data and user programs: NT1NT600S, NT610G, NT610C, NT620S, NT620C, Nter being read to the Support Tool, screens must

    with the screen size. Depending on the function u

    programs may also be necessary. For details ondata, refer to the NT31/NT31C/NT631/NT631C Perence Manualand the NT-series Support Tool O

    The dimensions of the panel cut-out to accommodsame as for the NT30/NT30C.

    Two Ports Featured as Standard:

    Touch Switch Operation

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    17/299

    Functions of the NT31/NT31C

    Screen data can be checked simply by operations menu, without connecting up to the Support Tool.

    The data capacity of 1 MB is twice that of the NT30/Nlarger quantity of screen data.

    The number of elements that can be registered on oerably increased, making it possible to create more tails, refer to Display Restrictions in AppendixNT31/NT31C/NT631/NT631C Programmable Term

    It is now possible to write binary data stored in wordNT31/NT31C. This makes data conversion by a pro

    sary, reducing the load on the host.

    Any quadrupled characters are displayed with a 32

    By using the system installer supplied with theZJCAT1-EV4), the system program at the NT31/NTfrom a personal computer.

    The NT31/NT31C meets UL/CSA standards and E

    Compatible with Sequencers in the following series:lator Link) and FX-series (Programming Console),

    ries, GE Fanuc 90-20 and 90-30 Series, and Siemeries. Specialized system programs can be installed to be controlled from other companies Sequencers

    Up to 3 windows can be displayed simultaneous9-word window control area has been allocated to th

    9 words can be changed from the Host to open, clo

    1-2-2 Comparison between NT31 and NT31CTwo NT31 models the NT31, which is capable oand the NT31C, which is also capable of color displferences between the NT31 and NT31C are tabled

    Function NT31

    Type NT31-ST121-EV2 (Beige)NT31-ST121B-EV2 (Black)NT31-ST122-EV2 (Beige)

    NT31-ST122B-EV2 (Black)

    NT3NT3NT3

    NT3

    Display panel STN monochrome LCD displaytype (with white backlight)

    STN(with

    Beige and black are the front panel colors of each

    1-2-3 Additional Functions of the V2 Versions

    Screen Data CheckFunction

    Increased Screen DataCapacity

    Large Increase inMaximum Number ofRegistered Elements

    Binary Data can be Readto/Written from the Host

    Character Display UsingHigh Definition Fonts

    Simple Version Upgrades

    Complies withInternational Standards

    Compatible with OtherVendors Devices

    Multiple Windows

    F i f h NT31/NT31C

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    18/299

    Functions of the NT31/NT31C

    PT operations and inputs can be disabled from thbeen allocated in the PLC for the corresponding PT

    puts, or string inputs.

    The following displays can be performed with lamp

    Display several lines of labels.

    Switch the display between different labels when

    Display the numeral memory table contents as la

    Display the string memory table contents as labe

    The word configuration of the PT status control arecan be set to emulate those of the NT30/NT30C or

    this mode is called NT30/620 compatible mode.

    When the PT is operating in NT30/620 compatible man NT30/NT30C or NT620S/NT620C/NT625C in the

    PT retains full V2 functionality in all functions otherRefer to Appendix Cin the NT31/NT31C/NT631/NT6nal Reference Manualfor more details.

    Word configuration and functions of the PT statusnotify area

    Image/library codes

    Insertion of image/library data into character strin

    Data areas in CS-series PLCs that were previouscessed. The data areas listed below can be access

    All banks in the EM area, timer completion flagflags (CU), Work areas (WR), Task flags (TK),

    You can set the data (numeric values) for multiple wo

    tabular elements on the PT screen, and write these s

    to words on the host (i.e., PLC or PT memory) usingthe PT Unit. Also, multiple words of numeric data cone operation. In this way, groups of parameter settUnit, and written to or read from the host.

    You can display the brightness and contrast adjustm

    touch switch or commands from the host, even wh

    1-2-4 Comparison between NT30/NT30C and NT31/NT3

    Item NT30/NT30C

    Support Tool used NT-ZJCAT1-EV4 or NT-ZA3AT-EV2 NT-ZJCAT

    DIP switches On rear of unit None (soft

    Use of B7A unit Possible Not possib

    Use of memory unit Not possible Possible

    Interlock Function

    Improved Lamp/Touch

    Switch Labels

    NT30/NT30C andNT620S/NT620C/NT625CEmulation

    Additional CS-seriesData Areas Accessible

    Recipe Function

    Adjusting Contrast andBrightness During PTOperation

    F ti f th NT31/NT31C

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    19/299

    Functions of the NT31/NT31C

    Item NT30/NT30C

    NT31/NT31C system program data NT-ZS3AT-EV1(including system installer)

    The systemgram dataport Tool.

    High-speed 1:N NT Link Not possible Possible*1

    Memory Link System program Exclusive use by Memory Link Same as O

    Screen data Shared with OMRON connection Exclusive

    LCD contrast adjustment By a control on the rear of the unit By touch p

    Backlight brightness adjustment Not possible By touch p

    Number of user-registered screens Maximum of 2000 Maximum

    Screen data capacity*2

    (User program memory)

    512 KB 1 MB

    Numeral string data Maximum of 1000 Maximum

    Character string data Maximum of 1000 Maximum

    Bit data 256 Maximum

    Mathematical tables None 256 max.Calculatioautomatica

    Image data Maximum of 224 Maximum

    Library data Maximum of 896 MaximumMethod for storing numeric values(numeral memory data and PT statuscontrol area)

    Fixed as BCD (binary coded decimal) Selectabledecimal) o

    PT status control area size 4 words 5 words (p

    PT status notify area size 3 words 2 words (p

    Window control area size None 9 CH*2

    Registering continuous screen Possible Not possib

    as a substLamp/Touch switch labels Fixed display (1 line only) - Multiple

    - ON/OFF- Numera

    - Charact

    Interlock function None OperationsPLC by allcorresponinput, or ch

    Device monitor function Not possible Possible*1

    Recipe function None Possible

    Accessible CS-series PLC dataareas

    --- The data aaccessed accessible

    - EM ban

    Timer co

    Functions of the NT31/NT31C

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    20/299

    Functions of the NT31/NT31C

    1-2-5 Principal Functions of NT31/NT31C

    The following are the principal functions of the NT3

    Functions relating to data display

    Character display

    Characters of various sizes can be displayed. Characters can be flashed and displayed in reverse

    video. High grade fonts are available for the characters with their size enlarged.

    Graphic display

    Polylines, rectangles, polygons, circles, circular arcs, and sector shapes can be displayed. They can

    also be tiled with various patterns, flashed, or displayed in reverse video.

    Memory data display

    The contents of character string memory tables and numeral memory tables can be displayed. The

    contents of memory tables can be changed from the host.

    Graph display

    Not only bar graphs but also broken line graphs, trend graphs, and analogue meter graphs can be

    displayed using numeral memory tables

    Lamp display

    Lamps can be turned on and flashed under the control of the host. It is also possible to display different

    graphics in the ON and OFF states.

    Alarm list/history display

    Warning messages are automatically displayed in a list in response to the state of a host bit. The time

    and the number of times of the messages appeared can also be displayed.

    Functions relating to data output

    Buzzer

    A built-in buzzer can be sounded.

    Screen printing

    A hard copy of the currently displayed screen can be printed at the printerconnected to the NT31/NT31C.

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    21/299

    Functions relating to the system

    System menu

    System settings and maintenance can be performed by selecting from system menus displayed on the sc

    Creation of screen data

    Screen data created using the Support Tool at a personal computer can be transferred and stored in the b

    Resume functionThe status and memory table contents of the NT31/NT31C immediately before its operation is stopped ca

    stopped, or while the power is off, and then displayed on the screen again when operation is restarted.

    Screen saver function

    This function serves to extend the service life of the backlight and prevent the formation of an afterimage o

    Clock function

    The time can be displayed in accordance with the internal clock data.

    Programming Console function

    The PT can perform the same operations as a C200H-PR027-E Programming Console when the PT is co

    CPM2C, CQM1, CQM1H, C200HX/HG/HE-(Z)E, or SRM1 PLC in a 1:1 NT Link connection, or a CS1G/Cconnection.

    Device Monitor function

    When the PT is connected to a PLC in a 1:1 NT Link or 1:N NT Link, the PT can be used for operations su

    operating mode, displaying or changing the PVs of words, or reading the error log.

    System program install function

    Functions relating to data input

    Input by touch switches

    Data can be input by simply touching touch switches displayed on the screen.

    The possible functions of touch switches include sending data to the host and changing the screen display

    Inputs can be enabled and disabled from the host when interlock bits have been allocated.Pop-up window function

    A window overlaying the currently displayed screen can be alternately opened and closed by pressing a to

    In addition to fixed character and graphic displays, control keys and character keys created as touch switc

    window. A maximum of three windows can be displayed simultaneously.Since the window need only be othe screen can be used efficiently.

    Numeral/character string setting function

    Numeric keys and character keys can be assigned to touch switches so that numeric values and characte

    operation site.

    The input data is written to numeral/character string memory tables and also sent to the host. It is also pos

    from the host.

    Recipe function

    Several words of numeric data can be edited at the PT Unit, and written to or read from the host in one op

    Input from a bar code reader

    Data read with a bar code reader can be input to a character string input field.

    Functions relating to communication

    Communications with the host

    The NT31/NT31C can communicate with the host by four methods: host link, 1:1 NT Link, 1:N NT link (staMemory link. Data can be read from the host, and data input by means of touch switches and numeral/cha

    sent to the host. It is also possible to connect with other model PLCs.

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    22/299

    1-2-6 Displays

    The NT31/NT31C can display various kinds of elememeric values, graphs, lamps, and touch switches, on

    displayed by the NT31/NT31C are created by usingsonal computer.

    La

    Characters(character st

    ToCharacters(fixed display)

    Bar graph

    Line 1 StatusStop Restart

    Machine name: NT31C-ST141

    Production qty.: 137 units

    Stage 2 Check 2Check 1Stage 1

    0% 50% 100%

    25% Numeric va

    (numeral di

    Characters and various graphics (circles, circular a

    gons and rectangles) whose display does not havedata, image data, and library data that has already bten directly onto the screen.

    Polyline Polygon

    Circle Arc

    * A continuous straight line withup to 256 points can be drawn.

    * A polygon with upvertices can be dr

    Marks are graphics comprising 16 by 16 dots that Th b d t h t ithi h

    Fixed Displays

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    23/299

    Library data are combinations of fixed display grapgraphic. They are registered in advance and as ma

    played at any position on the screen.

    Since it is generated by combining graphics, library

    Mark Image data Library data

    These are graphics whose display status changes in

    of bits at the host. Squares, circles, sectors and poly

    (normal (standard) lamps). In accordance with the stbe lit (displayed in reverse video) or flashed (repeatmal and reverse video display states).

    Lamps can also display different image/library data f

    the host bit (such lamps are called image/library la

    There are four standard lamp labels: fixed display switching character strings, numeral displays, andWhen fixed display character strings or ON/OFF sw

    used, several lines of labels can be displayed.Normal (Standard) Lamps

    ON

    ON

    HostUnlit state

    Image Library Lamps

    ON

    Unlit state

    Host

    These switches can be set at any location on the scre

    Lamps

    Touch Switches

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    24/299

    Touch switches can be made to light or flash in accohost bit in the same way as lamps.

    The following 8 types of display graphic can be usedard, shadow, 3-dimension, no display frame, recta

    When rectangle, circle, polygon, or sector is selecwithin which pressing of the touch switch is sensed

    be set independently of the position where the disp

    Touchswitch area

    When thisposition ispressed...

    Displayframe

    There are four touch-switch labels: fixed display switching character strings, numeral displays, andWhen fixed display character strings or ON/OFF swused, several lines of labels can be displayed.

    Numeric values stored in the numeral memory tab

    played numerals can be changed by changing thememory tables.

    Hexadecimal values can also be displayed.

    When decimal values are displayed, the number of dfractional part of displayed values can be specified

    Character strings stored in the character string meThe displayed character strings can be changed by the character string memory tables.

    Numeric values can be input at the PT by using toumeric values can also be stored in a numeral memhost.

    Numeral inputs can be enabled and disabled from thhas been allocated.

    7 8 9

    4 5 61 2 30 .

    12345678

    Window

    Input

    Character strings can be input at the PT by using tou

    Numeral Displays

    String Displays

    Numeral Inputs

    String Inputs

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    25/299

    Numeric values can be input by incrementing or dethe corresponding touch switch (+, ). The input n

    stored in a numeral memory table and notified to th

    Thumbwheel switch inputs can be enabled and disa

    interlock bit has been allocated.

    These are graphics whose display changes in accor

    ues stored in numeral memory tables. There are thBar GraphsBar graphs display the present value in a numeral mpercentage within the range 100% to +100% of a

    60%

    Analog Meters

    Analogue meters display, using a quarter, half, or fuvalue in a numeral memory table converted to a p100% to +100% of the preset value. Users can ctype and filling area type displays. Users can also a

    60%

    Broken Line GraphsBroken line graphs display, in an easy-to-read formemory table values converted to a percentage

    +100% of a preset value.

    100%

    100%

    0%Example shnumeral me(with a chedisplay sign

    Trend Graphs

    Thumbwheel Switches

    Graphs

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    26/299

    The alarm list/history function displays message(image/library data), in accordance with changes in

    For the alarm list, a series of bit memory tables are(contents of character string memory tables) set for

    ON are displayed.For the alarm history, bit memory tables for which thcontinually monitored, and the time when they comthey come ON are recorded and displayed togetherter string) set for the bit memory table.

    The NT31/NT31C allows selection of the display ordor the oldest record first by memory switch setting.

    The alarm list function is used to determine which

    time. The alarm history function is used to determinoccurred in the past and how many times alarms h

    Alarm List

    No.1

    No.1

    No.1

    Message (character string table No. 32)set for bit memory table No. 14

    Character string table No. 32 Character string table No. 50Image/library data 1002

    Character string table No. 32

    Image/library data 113CCharacter string table No. 54Image/library data 1125

    Image/librarydata 113C

    When the message displayed is pressed, the image/librarydata (113C) set for bit memory table No. 14 is displayed.

    Alarm History

    No. 22

    No. 23

    No. 24

    Message (character string table No. 13)

    set for bit memory table No. 24

    Character string table No. 13

    Character string table No. 12

    Character string table No. 11Image/library data 005F

    Character string table No. 12Image/library data 102A

    Image/librarydata 102B

    Character string table No. 13Image/library data 102B

    When the upper message displayed is pressed, the image/libdata (102B) set for bit memory table No. 13 is displayed.

    You can set several words of numeric data at the PT to the host. You can also read several words of num

    display it on the PT screen.

    Alarm List/History

    Recipe

    System Configuration

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    27/299

    1-3 System Configuration

    This section shows the configuration of a system thadetails on product models, refer to Appendix J Mod

    1-3-1 Peripheral Devices That Can Be Connected

    The following peripheral devices can be connected

    HostControls the NT31/NT31C as required while co

    the production line.

    Host Link: C series, CVM1/CV series PLC, SCan be connected to CPU units, host link units

    is not possible to some models of CPU unit an

    NT Link: CS1G/CS1H, CPM1, CQM1, C200H

    CVM1/CV series PLCs, SRM1

    Can be connected to CPU units and SRM1. H

    to some models (pages 65, 70, 109 and 111).

    Memory Link: Can be connected to a persona

    Other companies PLCs can also be connecte

    Bar code readerBar codes can be read

    as character strings.

    RS-232C cable

    (max. 15 m)

    or

    RS-422A/485 cable

    (max. 500 m)PrinterFor printing out the

    currently displayed

    NT31/NT31C screen. Personal computerRunning Windows 95/98/NT S

    U

    N

    c

    N

    N

    SU

    p

    Memory unitCan store screen data

    and system program to

    be read out

    automatically at startup.

    NT31/NT31CDisplays production line monitoring and instructions

    to the operation site, and notifies the switch

    ON/OFF status and numeric value inputs to the

    host.

    When a 1:N NT Link is being used, up to 8 PTs can

    be connected to a single PLC.

    Bar code reader (page 35)

    Recommended printers (page 34)

    It is also possible to use printers that can emulating the NEC PC-PR201PL control protocol), anone of the following EPSON control standards

    ESC/P 24-J82 (monochrome).

    Communications with the Host

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    28/299

    Reference: The following optional devices are available. All of thNT31 or NT31C.

    Replacement backlight NT31C-C

    (NT31-ST121-EV2/NT31C-ST141-EV2 (same

    light for the NT31-ST122-EV2/NT31C-ST142-the user.)

    Reflection-suppressing protective sheet NT30-KB

    Chemical-resistant cover NT30-KBA

    Replacement battery 3G2A9-BA

    1-3-2 Connecting to the HostThe NT31/NT31C has the following two communic

    Serial port A:

    D-SUB 9-pin connector

    For RS-232C use only (The Support Tool and ba

    nected here.)

    Serial port B:

    D-SUB 25-pin connector

    For RS-232C or RS-422A/485 (Selectable by me

    (The Support Tool and bar code readers cannot b

    The host can be connected at either of these two p

    The connection methods for each communication sides are indicated below. Make the settings in accotion method that can be used with the PLC to be conthe operation site.

    Reference: When using an RS-232C/422A convertor unit (NT-AL

    link (1:1) communication method, RS-485 cannot bebe made with RS-232C or RS-422A.

    1-4 Communications with the HostThe NT31/NT31C is connected to the host by one otion methods.

    The following communications can be used to conn

    Host link

    1:1 NT Link 1:N NT Link (standard or high-speed)The following communications can be used to conneor FA computer:

    Communications protocol supported by the other Memory link

    Communications with the Host

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    29/299

    The NT31/NT31C can directly write to and read frwords to change the display status of the elements o

    PT operating status, and notify statuses to the host

    This function, which directly reads and writes the sta

    out using a PLC program is called the direct conneThe words and bits allocated for direct connection arand allocated bits.

    The direct connection function allows the data

    NT31/NT31C to be read from the memory area in thetables in the NT31/NT31C. Also, the data input at thten to the memory area in the PLC. The NT31/NT31accordance with statuses in the PLC memory area, tus data can be written to the PLCs memory area.

    PLCNT31/NT31C

    DM area

    Auxiliary relay area

    The direct connection function has the following fea

    The bits and words referring to operating status ation and those for storing input data can be freely aof the PLC memory.

    Since the NT31/NT31C can directly refer to PLC bing the program at the PLC, it can be connected tthe PLC program which controls the currently run

    The area to control and notify the NT31/NT31C screens, display/no display status, and buzzer outto any part of the PLC data area. This means that and controlled just by reading this area at the PL

    special communication program.

    The direct connection function allows the NT31/NT3almost all bits and words in the PLC and to NT31/NT31C screen display. This function can redthat its program development efficiency is improve

    1-4-2 Host LinkThe host is connected to a PT in a 1:1 connection, ahost are read and displayed by host link communic

    used for connection to the majority of PLC types.

    Features of the DirectConnection Function

    Communications with the Host

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    30/299

    PLCs that can be connected with the 1:N connectionlows: CQM1H, C200HX/HG/HE (-Z)E, CS1G/CS1H

    The NT31/NT31C also supports OMRONs high-svides faster 1:N communications. The only PLCs t

    1:N NT Link are the -EV1 and higher versions of thIn the following sections, the term NT Link is used to nication method in general, the term 1:1 NT Link is

    NT Links with a 1:1 connection, and the term 1:N NTstandard and high speed NT Links with 1:N connecstandard 1:N NT Link is distinguished from the high

    The NT link has the following features.

    High-speed communications with specific types of

    NT31/NT31C also supports OMRONs high-spee Writing in units of bits to the PLC memory area is

    This enables the other bits of words to which a cated to be allocated for other purposes (e.g. a

    However, since data is written to the DM area inwords allocated to touch switches in this area cposes.

    The NT link can be used even when the PLC is inhost link method is used, the NT31/NT31C switchethe PLC is in the RUN mode.)

    In the case of PTs that support the standard 1:NT31C, NT600S, NT620S, NT620C, NT625C, NTcan be connected to one port of the PLC and usePTs (NT31, NT31C, NT631, and NT631C) can a

    neously when the high-speed 1:N NT Link is beinAll of the PTs connected to a PLC port must use

    speed 1:N NT Link; the two communications sysport.

    When using a C200HX/HG/HE-(Z)E PLC and stathree 1:N NT Link systems (i.e., 24 PTs) can be comunication board in the option slot of the CPU. (Oncan be used.) For details on the Communications

    Communications Board Operation Manual(W304

    When using a CQM1H PLC and standard 1:N NT

    systems can be connected by installing Serial ComInner Board slots. For details on the Serial Commu

    CQM1H Serial Communications Board Operation

    When using CS1G or CS1H PLC, multiple 1:N NThigh-speed) can be connected by installing a Seriathe INNER Board slot or installing a Serial Comm

    Features of the NT Link

    Communications Using Memory Links

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    31/299

    1-4-4 Connecting to other Companies PLCs

    Installing a system program for multi-venders by usin

    enables the NT31/NT31C to be connected to the PLconnection. This system installer is supplied wi

    ZJCAT1-EV4).

    The NT31/NT31C can be connected to the followin

    Mitsubishi A series programmable controller (com

    Mitsubishi FX series programmable controller

    SLC 500 Series by Allen-Bradley

    90-20 and 90-30 Series by GE Fanuc

    S7-300 and S7-400 Series by Siemens

    For details on the procedure for connecting to othePLC Connection Manualor NT31/631 Multi Vendo

    1-5 Communications Using Memory LinksIn this section, a communication method other than the memory link, is discussed.

    1-5-1 Memory LinkMemory link is a method to send and receive data beor a FA computer and the NT31/NT31C by using Rtion.

    In memory link, there is an area called PT Memory, NT31/NT31C, and this area is treated as a virtual aPT memory and the display elements of the NT31/NTconnection. By sending a command for the memory

    NT31/NT31C execute processes through PT memmands are kept handy for read and write tasks of

    character-string memory table, and bit memory tab

    Lamp

    PT memory

    PT

    RS-232C/422Acommunication

    PLCNT31/NT31C

    Direct connection

    Numeralmemorytable

    Compatible PLC

    Communications Using Memory Links

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    32/299

    Screen switching strobe

    Numerals input strobe

    Character-string input strobe

    The usable area for allocation is the PT memory

    1-5-2 Comparison between Direct Connection and Mem

    The major differences between the direct connectionfollows:

    In the memory link method, the communication witout by using commands. Compared to the ordinal

    be used requiring almost no programs, the memorygram that is necessary for interchange of comman

    vantages to the memory link method by using a larable in the direct connections from major models sand a FA computer equipped with RS-232C/RS-42

    allowing the PT to be suited for larger usage.

    Actual PLCs have many kinds of areas, where as with only one kind. When creating screen data by uods, it is always necessary to allocate display pa

    For communication between the host and the PT by t

    for handling screen display elements, refer to the NTProgrammable Terminal Reference Manual.

    1-5-3 Memory Link Online Transfer Function

    When memory link communications are being useswitched to Transmit mode from the host even if thand screen data can be written. (The NT31/NT31mode after the screen data is written.)

    The memory link online transfer function can be usedfixed time each day or replace screen data with mmaintenance.

    For more details on the memory link online transfer fon the memory link online transfer function in the NTProgrammable Terminal Reference Manual.

    Before Operating

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    33/299

    1-6 Before Operating

    Follow the procedure given below to start the syste

    For the host link, refer topages 52 and 99, and the

    manuals for the host link

    unit and peripheral tools.

    For the NT link (1:1), refer

    to pages 65 and 109. For the NT link (1:N), re-

    fer to pages 70 and 111.

    For the high-speed NTlink (1:N), refer to pages

    74 and 113.

    For the Memory link, referto pages 70 and 114

    Host

    Set the host settings.

    Connect to theNT31/NT31C.

    Create the host program.

    Start operation.

    NT31/NT31C

    Install the PT in theoperation panel.

    (page 30)

    Connect the power supply.

    (page 31)

    Install the system program.*1

    (refer to page 149 and the

    Support Tool manual)

    Make the settings in thesystem installer mode.*2

    (page 149)

    Transmit the screen data. (page 153)

    Set the memory switches.

    (page 155)

    Connect to the host.

    When RS-232C used at the PT: refer to section 4

    When RS-422A/485 used at the PT: refer to section 5

    Confirm the settings andcheck communication.

    Support Too

    Install the SupporTool at the compu

    (refer to the m

    the Support To

    Create the scre

    (Refer to the NT31

    Programmable Te

    and theSupport T

    *1: System program installation is only done in special ciwhen changing the system program, or to recover theinstalled program. This operation is not normally nece

    models (sequencers), however, it is necessary to inst

    *2: Display of the system menu, and all change operatioenables you to prevent the accidental deletion or altesettings.

    Reference: For the system program, use the NT31/NT31C sy

    Before Operating

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    34/299

    Device or Software Manual Title

    PLC SYSMAC CPM1 Operation Manual

    SYSMAC CPM1A Operation Manual

    SYSMAC CPM2A Operation Manual

    SYSMAC CPM2C Operation Manual

    SYSMAC C200H Operation Manual (for CPU01/03/11) (progra

    SYSMAC C200H Operation Manual (for CPU21/23/31) (progra

    SYSMAC C200HS Installation Guide

    SYSMAC C200HS Operation Manual (programming)

    SYSMAC C200HX/HG/HE-Z Installation Guide

    SYSMAC C200HX/HG/HE Programming ManualSYSMAC C200HX/HG/HE-Z Programming Manual

    SYSMAC C1000H/C2000H Operation Manual (programming)

    SYSMAC CQM1 Programming Manual

    SYSMAC CQM1H Operation Manual

    SYSMAC CVM1/CV500/CV1000/CV2000 Operation Manual: Lgrams

    CS-series CS1G/H-CPU -E Programmable Controllers Op

    ManualCS/CJ-series Serial Communication Boards/Units Operation M

    SYSMAC CQM1H Series Serial Communications Board Opera

    CompoBus Master ControlUnit

    SRM1 Operation Manual

    Programming Devices SYSMAC Support Software Operation Manual: C-series PLCs

    SYSMAC Support Software Operation Manual: CVM1 PLCs

    SYSMAC CPT User Manual and Quick Start Guide

    CX-Programmer Operation Manual (Ver. 3.1)

    CX-Programmer Operation Manual (Ver. 4.0)

    Host Link Unit/ SYSMAC C-series Host Link Unit Operation ManualSerial Communications

    SYSMAC CVM1/CV-series Host Link Operation Manualoar

    SYSMAC C200HW-COM01 C200HW-COM02-V1 to C200HWSerial Communications Board Operation Manual

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    35/299

    Preparing

    This section describes the connection methods that are possible with the PTs, and the functi

    required knowledge before connecting to the host and to the peripheral devices.

    2-1 Method for Connection to the Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    2-2 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Method for Connection to the Host

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    36/299

    2-1 Method for Connection to the HostThis section describes the methods for connectioNT31/NT31C, and the relationship between the ccommunication method.

    NT31/NT31C Communication Ports and CommuThe NT31/NT31C has two communication ports. Thtable below.

    CommunicationPort

    Usable Communication Methods

    Serial port A

    Host linkNT link (1:1)NT link (1:N)*

    Memory link(Support Tool connection)(bar code reader input function)

    Serial port B

    Host linkNT link (1:1)NT link (1:N)*

    Memory link

    * There are two NT Link (1:N) communications rates: s

    Communication Methods That Can Be Used wit

    The following communication methods can be usedconnected to the NT31/NT31C.

    RS-232C

    RS-422A

    RS-485

    The communication types that are actually supporhost unit. For details, refer to Section 4 ConnecRS-232C Portand Section 5 Connecting to the Host

    Converting the Communication Type with an RSUnit

    The following communication type conversions RS-232C/RS-422A convertor unit (NT-AL001-E, m

    RS-232C RS-422A

    RS-232C RS-485

    Method for Connection to the Host

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    37/299

    Combinations of Communication Method and CThe connection methods that can be used depend

    method used and the communication type for coNT31/NT31C and the host are indicated in the tabl

    Communica- Communica-Usable

    tion Type atPT

    tion Type atHost

    Usable Connection MethodHostlink

    L(1

    RS-232C RS-232C

    Direct 1:1 connection

    PT Host

    RS-232C (max. 15 m)

    1:1 connection via a convertor unit

    PT

    RS-232C(max. 2 m)

    Host

    RS-422A(max. 500 m)

    Convertor unit(NT-AL001)

    RS-422A

    RS-232C

    1:N connection via a convertor unit

    PT HostConvertor unit

    (NT-AL001)

    RS-422A(total length 500 m)

    RS-232C(max. 2 m)

    Direct 1:1 connection

    PT Host

    RS-422A (max. 500 m)

    RS-422A

    1:N connectionPT Host

    RS-422A (total length 500 m)

    : Connection possible

    Method for Connection to the Host

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    38/299

    Communica- Communica-Usable C

    tion Type atPT

    tion Type atHost

    Usable Connection MethodHostlink

    NLi(1

    1:1 connection via a convertor unit

    PT Convertor unit(NT-AL001)

    Host

    RS-485(max. 500 m)

    RS-232C(max. 2 m)

    RS-485

    RS-232C1:N connection via a convertor unit

    PT HostConvertor unit(NT-AL001)

    RS-485(total length 500 m)

    RS232C(max. 2 m)

    Direct 1:1 connection

    PT Host

    RS-485 (max. 500 m)

    RS-485

    1:N connection

    PT Host

    RS-485 (total length 500 m)

    : Connection possible

    The RS-232C/RS-422A convertor unit (NT-AL00pin 6 of the RS-232C connector. Check the signalat the host.

    +5 V is not output from serial port B of the NT31/NNT-AL001 at serial port B, a separate power supAL001.

    The cable of an NT-AL001 cannot be connectedpower is ON. Always connect or disconnect the cafrom the RS-232C cable is OFF (while the host p

    Names and Functions of Parts

    2 2 N d F ti f P t

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    39/299

    2-2 Names and Functions of PartsBefore starting operation, the names and funcNT31/NT31C are described here as a confirmation.tings is also described.

    Front View

    POWER

    RUN

    POWER LED

    Lit in green when the power is supplied.

    RUN LED

    Lit in green while the unitis in the RUN mode.

    Lit in orange or red whenthe battery is low (orangein the RUN mode, red in

    other modes).

    Display

    The NT31 has a mscreen with a back

    has an STN color Lbacklight.

    The whole area of

    panel which works

    Reference: The NT31/NT31C comes in two body colors.

    NT31 NT31C Bod

    NT31-ST121-EV2NT31-ST122-EV2

    NT31C-ST141-EV2NT31C-ST142-EV2

    B

    NT31-ST121B-EV2NT31-ST122B-EV2

    NT31C-ST141B-EV2NT31C-ST142B-EV2

    B

    Names and Functions of Parts

    Rear View

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    40/299

    Rear View

    24VDC

    PRINTER PORT B PORT A

    Battery coverThe battery is secured underneath this cover.

    Reset switch (inside the cover)

    Used to initializes all the statuses of thHowever, registered data such as screswitch settings, retain their statuses be

    GR terminalGrounding terminal to preventmalfunction due to noise.

    Power input terminalsConnect the power to theNT31/NT31C at theseterminals.

    Backlight unit (inside the cover)Open the cover to reveal the backlight.The backlight is off while the cover isremoved. Tighten the cover screwsecurely.

    Serial port A connectorConnect the cable for connhost or Support Tool here. Areader can also be connecta 9-pin connector for RS-23

    Serial port B connectorConnect the cable for connection to thesetting made at the NT31/NT31C systeRS-422A/485 may be used. This is a 2It is not possible to use RS-232C and R

    Printer connectorConnect the printer cable here. Outputconforms to Centronics specifications.

    Note Confirm system safety before turning the power ON

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    41/299

    Hardware Settings a

    This section describes the settings of the PTs and methods for connection to peripheral devic

    For details on connecting to the host, refer Section 4 Connecting to the Host from the RS-232C P

    the Host from the RS-422A/485 Port.

    3-1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-1-1 Installation Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-1-2 Installation in the Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-1-3 Power Supply Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1-4 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-2 Connecting to the Support Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-3 Connecting a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-3-1 Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-4 Connecting a Bar Code Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-4-1 Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-4-2 Setting a Bar Code Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-4-3 Data Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 Using a Memory Unit (-VVersions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-5-1 Installation Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-5-2 Method of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-6 Using a Memory Unit (Versions without the -VSuffix) . . . . . . . . . . . . . . . .

    3-6-1 Installation Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    3-6-2 Method of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Installation

    Note On unpacking the NT31/NT31C and peripheral devic

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    42/299

    Note On unpacking the NT31/NT31C and peripheral devicpearance and confirm that there is no damage. Also

    normal noise on shaking the unit lightly.

    3-1 InstallationInstall the NT31/NT31C in the operation panel anNT31/NT31C as described below.

    3-1-1 Installation EnvironmentObserve the following points when installing the PT

    Note 1. Do not install the unit at sites subject to the fol

    Severe temperature variations

    Temperatures or humidities outside the ranges High humidity, condensation Splashing chemical agents Severe oil splashing Corrosive or flammable gases Strong vibrations or shocks Direct exposure to wind and rain (outdoor sit Strong ultra-violet irradiation

    2. Take adequate measures to ensure shielding if subject to any of the following conditions.

    Static electricity, or noise from other equipme Strong electromagnetic fields Nearby power cables Potential exposure to radioactivity

    3-1-2 Installation in the Operation PanelThe NT31/NT31C is mounted in an operation panel b

    Use the panel fittings and tool (Philips screwdriver) iage and follow the procedure below.

    1, 2, 3... 1. Open a hole of the dimensions shown below NT31/NT31C from the front side of the panel.

    131

    +0.5mm

    0 mm

    184+0.5mm

    0 mm

    2. Attach the panel fittings at the four positions at to

    Installation

    Note 1. During work at the panel, take care to ensure th

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    43/299

    g p ,unit.

    2. The thickness of applicable operation panel is 1must be tightened uniformly to a torque of 0.5 to

    water- and dust-resistance. Front sheet of NT3the tightening is too strong or not uniformity. Thewarped, and must be able to support an installaand strong.

    3-1-3 Power Supply ConnectionConnect a 24 VDC power supply to the power inpu

    Note 1. Depending on how the power is switched ON/Ostop. Follow the correct procedure when switch

    2. Carefully check the wiring before switching ON

    3. Do not connect AC power to the DC terminals.

    4. Use DC power supplies with low voltage fluctu

    5. Do not perform a dielectric strength test.

    6. If complying with EC directives (low voltage direwith reinforced insulation (compliance with EC d1998).

    24 VDC

    2p

    Power SupplyThe applicable power supply specifications are as

    Item V

    Power supply 24 VDC

    Allowable power supplyvoltage fluctuation range

    20.4 VDC to 26.4 VDC (24

    Power supply voltage

    capacity

    15 W or more

    Parts Used for Connection

    Note For the connection to the power supply terminal blocgreater cross sectional area and M3.5 size crimp te

    Tighten the screws on the terminal block to a torqu

    Installation

    Note When surge noise occurs in the DC power supply, c

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    44/299

    Suppressor (TVS) between the 24-V and 0-V DC te

    Recommended TVS model: 1.5KE33CAManufacturers: Vishay Intertechnology Inc, ST Mic

    3-1-4 Grounding

    The NT31/NT31C has a functional ground termina

    Carry out wiring under the following conditions.

    1, 2, 3... 1. In cases where there is a potential difference bNT31/NT31C and the host, ground as shown inis some distance between the NT31/NT31C a

    single point is difficult, do not connect the functiothe NT31/NT31C.

    2. If the NT31/NT31C is installed in the same panates noise, such as a motor or inverter, do not g

    terminal ( ) of the NT31/NT31C.

    Grounding ata single point

    NT31/NT31C Host

    Note Carry out grounding correctly in order to prevent op

    Connecting to the Support Tool

    3-2 Connecting to the Support Tool

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    45/299

    3 2 Connecting to the Support ToolIn order to install the system program in the NT31/Ndata created with the Support Tool to the NT31/NT3be connected to a personal computer with an RS-2

    The NT31/NT31C connects the RS-232C cable fromrial port A. When the host is connected at serial porhost can be maintained as it is while the NT31/N

    RS-232C cable from a personal computer.

    However, when a bar code reader is being used, it m

    the RS-232C cable can be connected, since they b

    PRINTER PORT B PORT A

    Serial port A

    (RS-232C, 9-pin)

    Communication ConditionsThe communication conditions are automatically seand Support Tool are started.

    Recommended Connector CableUse the cable indicated below.

    CV500-CN228 (length: 2 m), made by OMRON(D-SUB 9-pin, male D-SUB 25-pin, male)

    XW2Z-S001 (conversion cable), made by OMRO

    (D-SUB 25-pin, female half pitch 14-pin, male) XW2Z-S002 (length: 2 m), made by OMRON(D-SUB 9-pin, male D-SUB 9-pin, female)

    For details on making a connector cable, refer to Apfor Connecting a PLC(page 269).

    Connecting a Printer

    3-3 Connecting a Printer

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    46/299

    gConnecting a printer to the NT31/NT31C enables pcurrently displayed screen (printing of screen imageerations, printing of the screen display history and

    The following types of data can be printed, dependito the NT31/NT31C. For details, refer to the pages

    Hard copies of the screen (Refer to information onthe printer status in the NT31/NT31C/NT631/NT6nal Reference Manual.)

    Screen display history record data (page 196)

    Alarm history record data (page 198)

    3-3-1 Connection MethodConnect the printer to the NT31/NT31C with a Cenlow. The length of the cable should not exceed 1.5

    Reference: If the connector cable is connected or disconnected wis on, the NT31/NT31C may malfunction. Always turnbefore connecting or disconnecting the cable.

    24VDCPRINTER PORT B PORT A

    Recommended Connector Cable

    The following connection cables are recommended

    NT-CNT121 (1.5 m, 20-pin to 36-pin), made by O

    Recommended Printers

    When using a printer, use one that can emulate the NEC PC-PR201PL control protocol) or coming EPSON control standards: ESC/P 24-J83C(monochrome).

    When using a monochrome printer with an NT31

    NT31C memory switches (page 172).

    Connecting a Bar Code Reader

    3-4 Connecting a Bar Code Reader

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    47/299

    gConnecting a bar code reader to the NT31/NT31C enas character strings into character string input fieldsmemory tables.

    In order to use a bar code reader, the Comm. A Metset to Bar-Code Reader.

    For details on the method for inputting character strirefer to 3-7 Input of Numeric Values and Character NT631/NT631C Programmable Terminal Referenc

    Note Make sure that the power supply to the bar code reathe PT are both OFF before connecting or disconn

    3-4-1 Connection MethodConnect the bar code reader to serial port A of the NTfigure below.

    NT31/NT31C

    PRINTER PORT B PORT A

    Ba

    9-pin connector Serial port A

    (RS-232C, 9-pin)

    Connector cable Ba

    Bar code reader must match the communication sCode Reader, page 35) and data format (3-4-3 Data

    connect to the NT31/NT31C. Please confirm the sreader before using.

    For details on making a connector cable, refer to Apfor Connection to a Bar Code Reader(page 271).

    Reference: The bar code reader must be connected to serial port be connected at the same time as the Support Toocode reader is used, the host must be connected at

    3-4-2 Setting a Bar Code ReaderAfter connecting a bar code reader, set the communsettings for it by selection from the system menu.

    At the NT31/NT31C, set the communication conditiSettings at theNT31/NT31C

    Connecting a Bar Code Reader

    Make the settings shown in the table below at the bthat the communications speed parity stop bit and

    Settings at the Bar CodeReader

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    48/299

    that the communications speed, parity, stop bit, and

    communication settings made at the NT31/NT31Cmethod, refer to the instruction manual for the bar

    ItemCommunications speed 4800,

    Parity EVEN

    Stop bits 1 or 2

    Data bits 7 or 8

    Preamble STX

    Postamble ETX

    RS/CS control Availa

    Communication protocol No-pr

    Transmission of number of bar code label digits Trans

    Transmission of ID characters Trans

    Bar code types Multi-read)

    Trigger switch setting Autom

    About RS/CS Control

    During bar code reading, the NT31/NT31C performInput Method setting of the NT31/NT31C is set to AOFF, prohibiting the next input, until the read data h

    Because of this, when the Auto setting is made, thuntil the data has been notified to the host.

    However, when the setting is Auto and the RS/Cshorted, RS/CS control is ineffective. Consequent

    code reader to the NT31/NT31C is updated regardle

    is notified to the host.For details, refer to the instruction manual for the b

    3-4-3 Data Format

    The data format for communication when using the bNT31/NT31C is shown below.

    Data DataSTX

    (02H)

    The characters which are effective as data are hex7FH, and the maximum data length is 40 bytes.

    Data which does not follow the data format describdiscarded

    Reader

    Using a Memory Unit (-Vj Versions)

    3-5 Using a Memory Unit (-VVersions)

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    49/299

    This section discusses the use of a memory unit wNT31/NT31C PT (NT31-ST121/122-EVor NT3

    Reference: Depending on the PT model and the system programtion and using method of memory unit varies as foll

    PT Model System Program Functio

    Without VEarlier than Ver. 2 Conventional mem

    56.)suffix

    Ver. 2 or later

    (System programs

    ing memory unit.)

    With Vsuf-Earlier than Ver. 2 New memory unit

    fix Ver. 2 or later

    ys em programsmemory unit.)

    The memory unit functions are determined by the mgardless of the version of the system program insta

    By installing a memory unit (NT-MF261) on the NT3the NT31/NT31C can be recorded (backed up) in t

    In addition, the screen data in the memory unit can bNT31/NT31C when it starts up. This means that s

    data can be changed easily at the operation site witport Tool.

    The data in the memory unit is retained without ba

    means.In systems where there are frequent setup changes

    memory units in advance and recording screen datathe control performed in each case, the NT31/Nchanged simply by installing the memory unit, withouTool.

    In addition, even if NT31/NT31C is replaced, the prtained simply by installing the memory unit that retai

    screen data of the previous NT31/NT31C.By using the following combinations, data can bmemory unit.

    Screen data for two PTs.

    S stem program for t o PTs

    Using a Memory Unit (-Vj Versions)

    Reference: When a memory unit is mounted, the NT31/NT31Cating status On completion of data transmission w

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    50/299

    ating status. On completion of data transmission wdisconnect the memory unit from the NT3NT31/NT31C operation.

    Memory units (NT-MF261) can be used in commoels: NT31, NT31C, NT631, and NT631C (with or memory unit can store screen data for up to two PTever, since the data compatibility is not complete NT631/NT631C, an error may occur if an attempt iswith an NT31C. (The data must be converted usi

    Note also that although there is data compatib

    NT31C, and between the NT631 and NT631C, rect since these models have different number

    One memory unit can store a system program fomodels. In order to transmit a system program frNT31/NT31C, the system program must be compa

    The statuses of memory switch settings and systeto the memory unit besides screen data. When thewritten into the NT31/NT31C, make sure that thesethe NT31/NT31C used before transmission.

    3-5-1 Installation MethodInstall the memory unit (NT-MF261) at the expansiorear of the NT31/NT31C as shown in the figure belo

    connector is located underneath the note label.).

    3-5-2 Method of UseAs shown in the figure below, a memory unit has twand the operation is determined by the DIP switche

    Using a Memory Unit (-Vj Versions)

    The functions of the DIP switches on the memory ubelow.

    DIP Switch Functions

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    51/299

    SW1

    Switch Function

    Automatic transmission writin from the meSW1-1

    unit to the PT)

    Automatic transmission (writing from the PTSW1-2

    the memory unit)

    Manual transmission Direction of transmissSW1-3

    and bank used selected at the PT touch pan

    SW1-4 Data type to transfer

    SW2

    Switch Function

    SW2-1 Disable/enable writing to PT

    SW2-2 Disable/enable writing to the memory unit

    SW2-3 Area (bank) selection of automatic transmis

    SW2-4 System/Screen simultaneous transmission

    * The memory unit stores system program or screen dareas (bank 0, bank 1). (The total data storage is forof these two banks is used for automatic transmissio

    Reference: The DIP switch function of the memory unit is supwith the Vsuffix.

    In the following cases, a mode setting error occur

    More than one of the SW1-1 to SW1-3 switch

    None of the SW1-1 to SW1-3 switches are se

    In the following case, a protect setting error occur

    Transmitting to the write destination has beenSW2 1 SW2 2

    Using a Memory Unit (-Vj Versions)

    In this mode, system program or the screen data in written to the memory unit irrespective of the setting

    Writing Screen Data to aMemory Unit UsingA t ti T i i

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    52/299

    This mode is convenient if the touch panel is brokenis not possible, or if someone unfamiliar with touch sw

    tion site is using the system.

    Reference: When screen data is written to the memory unit, the dthe specified area up until that point is lost (if the dBank, the other Bank will not be affected).

    Method of ExecutionUse the following procedure to write the screen datamemory unit by automatic transmission.

    1, 2, 3... 1. Check that the power supply to the NT31/NT3switches of the memory unit as follows afterNT31/NT31C.

    SW1

    SW1-4 ON: System programOFF: Screen data

    SW2-3 ON: Bank 1OFF: Bank 0

    SW2-4 ON: System/Screen OFF: System/Screen

    SW2

    It is not strictly necessary to set SW2-1 to OFF (but it is recommended to do so to avoid loss of d

    errors.

    Reference: Setting SW2-4 to ON (System/Screen transmittethe setting of SW1-4.

    Setting SW2-4 to ON (System/Screen transmittethe setting of SW2-3, writes the system program data into bank 1 at all times.

    2. Switch the NT31/NT31C power ON.

    The screen data is automatically written into thdata in the NT31/NT31C is preserved.

    The messages Preparing, Transmitting, Verifyplayed on the screen in accordance with the pr

    Automatic Transmission(PT to Memory Unit)

    Using a Memory Unit (-Vj Versions)

    In this mode, the system program or screen data inwritten to NT31/NT31C irrespective of the setting s

    Writing Screen Data tothe PT Using AutomaticTransmission (Memory

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    53/299

    Since data transmission by this method is faster thasystem installer is used, it can save a lot of time. Wsystem program or screen data to multiple NT31/N

    convenient.

    Reference: When data is written to the NT31/NT31C, the data tthat point is lost. When the system program is NT31/NT31C also changes.

    Method of Execution

    Use the following procedure to write the screen datNT31/NT31C by automatic transmission.

    1, 2, 3... 1. Check that the NT31/NT31C power is OFF, thenmemory unit as follows after installing memory

    SW1SW2-4 ON: System/Screen t

    OFF: System/Screen n

    SW2

    SW1-4 ON: System programOFF: Screen data

    SW2-3 ON: Bank 1OFF: Bank 0

    It is not strictly necessary to set SW2-2 to OFmemory unit), but it is recommended to do so

    event of operating errors.

    Reference: Setting SW2-4 to ON (System/Screen transmitte

    the setting of SW1-4. Setting SW2-4 to ON (System/Screen transmitte

    the setting of SW2-3. In this case, the data transonly if the data inside memory unit is in either of f

    Bank 0: system program, Bank 1: other thBank 0: other than system program, Ban

    If the combination is not as listed above, a data tr

    When writing the system program into the NT31/

    program inside memory unit and the type of PT u

    2. Switch the NT31/NT31C power ON.

    The screen data is automatically written into th

    The messages Preparing, Transmitting, Verif

    Transmission (MemoryUnit to PT)

    Using a Memory Unit (-Vj Versions)

    In this method, the direction of transmission and arare set by touch switch operations at the NT31/NT

    d hil h ki h i

    Reading and Writing Databy Manual Transmission

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    54/299

    executed while checking the settings.

    Reference: When data is written to the NT31/NT31C or memory stored up until that point is lost.

    Method of ExecutionUse the following procedure to write screen data us

    1, 2, 3... 1. Check that the NT31/NT31C power is OFF, thenmemory unit as follows.

    SW1 SW2

    Setting of SW1-4 not relevant

    Setting of SW2-3 not r

    Setting of SW2-4 n

    In order to avoid loss of data in the event of oper

    set SW2-1 and SW2-2 so as to disable writing tois to be read.

    2. Switch the NT31/NT31C power ON.

    Display language select screen appears.

    3. Press the Japanese or English touch switcheguage.

    The following descriptions are for when EnglisThe screen shown below is displayed.

    Using a Memory Unit (-Vj Versions)

    (The second line may not be displayed in the k

    Current PT Screen Data, Screen

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    55/299

    The comment for the screen data in the NT31/

    Current Memory Unit Screen Data

    In the case of system program:The first line: Compatible PT type for the

    memory unit.

    The second line: System program name andgram inside the memory un

    (The second line may not be displayed in themodels.)

    In the case of screen data:

    The comment for the screen data in the NT31/

    The available transmitting destinations are altered dthe origin of transmitting as described in the table b

    Source Destin

    [PT]screen [Memory unit] Bank 0

    [PT]system

    [PT]system/screen [Memory unit] Bank 0/1 (fixed

    [Memory unit] Bank 0 If system program is selecte

    [PT]system (fixed)

    [Memory unit] Bank 1 If screen data is selected

    [PT]screen (fixed)

    [Memory unit] Bank 0/1 [PT]system/screen (fixed)

    Reference: When transmitting the system program and screethe PT to the memory unit, the setting of banks isBank 1: screen data, and when transmitting them fPT, either of the following combinations must be u

    Bank 0: system program, Bank 1: other thBank 0: other than system program, Ban

    When writing the system program into the NT31/program inside memory unit and the type of PT u

    4. Press Execute.

    The data is transmitted.

    The messages Preparing, Transmitting, Verify

    played in accordance with the progress of datatime, the progress of data transmitting status is

    the number of bytes and blocks (1 bank = 16 b

    Using a Memory Unit (-Vj Versions)

    The continuous buzzer sounds.

    The RUN LED flashes.

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    56/299

    If a protect setting error occurs when executing masible to return to the memory unit manual transmis

    OK touch switch, but in the case of other errors, themains in effect until the NT31/NT31C power is turn

    When an error occurs, take remedial action by refe

    Error Probable Cause

    Mode setting error DIP switches SW1-1 toSW1-3 are all OFF, ormore than one is ON.

    Turn tOFF, switchNT31

    Protect setting error(automatictransmission)

    Writing to the data writedestination has beenprohibited by the settingof SW2-1 or SW2-2.

    Turn tOFF, switchNT31

    Protect setting error(manualtransmission)

    Writing to the data writedestination has beenprohibited by the settingof SW2-1 or SW2-2.

    Perfoproce Pre

    turn

    tran

    cor

    TurOF

    sett

    turn

    Flash memory error An error occurred duringinitialization of theNT31/NT31C or memoryunit flash memory, orduring write processing.

    Turn tOFF, recurswrite this ca

    Verify error An error occurred duringverification processing atthe flash memory of theNT31/NT31C or thememory unit.

    Turn tOFF, recurswrite this ca

    Transmitting dataerror(The automatictransmission only)

    An attempt is made totransmit data other thana system program or thesystem program of adifferent PLC model into

    the NT31/NT31C as thesystem program.An attempt is made towrite a system programinto the NT31/NT31C asscreen data.

    Perfoproce Tur

    OF

    tingthe

    Tur

    OF

    to t

    the

    Using a Memory Unit (Versions without the -Vj Suffix)

    3-6 Using a Memory Unit (Versions without the

    This section discusses the use of a memory unit w

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    57/299

    This section discusses the use of a memory unit w

    NT31/NT31C PTs (NT31-ST121-E or NT31C-ST

    Reference: In this case, the function and use of the memory unit aNT31/NT31C without the Vsuffix. (The system proa memory unit cannot be processed.)

    By installing a memory unit (NT-MF261) on the NT3the NT31/NT31C can be recorded (backed up) in t

    In addition, the screen data in the memory unit can b

    NT31/NT31C when it starts up. This means that sceasily at the operation site without connecting to th

    The data in the memory unit is retained without bameans.

    In systems where there are frequent setup changesmemory units in advance and recording screen datathe control performed in each case, the NT31/N

    changed simply by changing the memory unit, witho

    Tool.

    One memory unit can store the screen data for two

    Note 1. Make sure that the power supply to the PT is Oconnecting a memory unit. After mounting a meits two screws.

    2. During data transmission, do not turn off NT31/NT31C or reset it.

    3. Do not touch the PCB (printed circuit board) w

    Reference: When a memory unit is mounted, the NT31/NT31Cating status. On completion of data transmission wdisconnect the memory unit from the NT3NT31/NT31C operation.

    Memory units (NT-MF261) can be used in commo

    els: NT31, NT31C, NT631, NT631C (with or wmemory unit can store screen data for up to two PTever, since the data compatibility is not complete NT631/NT631C, the data of NT631 cannot be usedthrough a conversion (the data must be converted

    Using a Memory Unit (Versions without the -Vj Suffix)

    3-6-1 Installation MethodInstall the memory unit (NT-MF261) at the expansio

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    58/299

    rear of the NT31/NT31C as shown in the figure beloconnector is located underneath the note label.)

    3-6-2 Method of UseAs shown in the figure below, a memory unit has twand the operation is determined by the DIP switche

    4321

    OFF

    SW1 SW2

    OFF

    4321

    Facto

    Note 1. Always confirm that the power to the NT31/NTDIP switches.

    2. Do not touch the PCB (printed circuit board) di

    The functions of the DIP switches on the memory ubelow.

    SW1

    Switch Function

    Automatic transmission writin from the meSW1-1

    unit to the PT)

    Automatic transmission (writing from the PTSW1-2 the memory unit)

    Manual transmission (Direction of transmissSW1-3

    and bank used selected at the PT touch pan

    SW1-4 Reserved for system use (must be set to O

    DIP Switch Functions

    Using a Memory Unit (Versions without the -Vj Suffix)

    * The memory unit stores screen data for one PTbank 1). (The total data storage is for two PTs.)these two banks is used for automatic transmis

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    59/299

    Reference: In the following cases, a mode setting error occur

    More than one of the SW1 switches are set to None of the SW1 switches are set to ON.

    In the following case, a protect setting error occur

    Writing to the write destination has been disabor SW2-2.

    For details on mode setting errors and protect seWhen Using a Memory Unit(page 3 to 25).

    In this mode, the screen data in the NT31/NT31

    memory unit irrespective of the setting status of the

    This mode is convenient if the touch panel is broken

    is not possible, or if someone unfamiliar with touch swtion site is using the system.

    Reference: When screen data is written to the memory unit, the d

    the specified area up until that point is lost (there is

    Method of ExecutionUse the following procedure to write the screen datamemory unit by automatic transmission.

    1, 2, 3... 1. Check that the power supply to the NT31/NT3

    switches of the memory unit as follows after inNT31/NT31C.

    OFF

    SW1SW2-3 ON: B

    OFF:

    SW2

    OFF

    1 12 23 34 4

    It is not strictly necessary to set SW 2-1 to OF

    memory unit), but it is recommended to do so

    event of operating errors.2. Switch the NT31/NT31C power ON.

    The screen data is automatically written into thdata in the NT31/NT31C is preserved.The messages Preparing, Transmitting, Verify

    Writing Screen Data to aMemory Unit UsingAutomatic Transmission(PT to Memory Unit)

    Using a Memory Unit (Versions without the -Vj Suffix)

    Reference: When data is written to the NT31/NT31C, the data tthat point is lost.

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    60/299

    Method of Execution

    Use the following procedure to write the screen datNT31/NT31C by automatic transmission.

    1, 2, 3... 1. Check that the NT31/NT31C power is OFF, then

    memory unit as follows after installing the mem

    OFF

    SW1SW2-3 ON: B

    OFF:

    SW2

    OFF

    1 12 23 34 4

    It is not strictly necessary to set SW2-2 to OFmemory unit), but it is recommended to do so event of operating errors.

    2. Switch the NT31/NT31C power ON.

    The screen data is automatically written into thThe messages Preparing, Transmitting, Verifplayed on the screen in accordance with the prWhen messages Preparing, Transmitting, and RUN LED flashes, and when the message FiniLED lights.

    3. Switch the NT31/NT31C power OFF, and remoTo operate NT31/NT31C continuously, switch th

    ON.

    In this method, the direction of transmission and arare set by touch switch operations at the NT31/NTexecuted while checking the settings.

    Reference: When data is written to the NT31/NT31C or memory stored up until that point is lost.

    Method of ExecutionUse the following procedure to read and write screemission.

    C / C O

    Reading and Writing Databy Manual Transmission

    Using a Memory Unit (Versions without the -Vj Suffix)

    2. Switch the NT31/NT31C power ON.

    The screen shown below is displayed.

    (Example)

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    61/299

    ( p )

    Current PT Screen Data

    The comment for the screen data in the NT31/NT3

    Current Memory Unit Screen Data

    The comments for the screen data in each area are

    Pressing the Trans. Direction Change and Bank Chges the selections for the direction of transmission aunit used.

    3. Press Execute.

    The data is transmitted.

    The messages Preparing, Transmitting, Verifyplayed in accordance with the progress of data

    4. Switch the NT31/NT31C power OFF, remove ththe NT31/NT31C power back ON.

    If an error occurs when using the memory unit, thefollows.

    The details of the error and remedial action are d The continuous buzzer sounds. The RUN LED flashes.If a protect setting error occurs when executing masible to return to the memory unit manual transmisOK touch switch, but in the case of other errors, themains in effect until the NT31/NT31C power is turn

    When an error occurs, take remedial action by refe

    Error Probable Cause

    Mode setting error DIP switches SW1-1 toSW1-3 are all OFF, ormore than one is ON.

    Turn tOFF, switchNT31

    Protect setting error(automatic

    Writing to the data writedestination has been

    Turn tOFF,

    Errors When Using aMemory Unit

    Using a Memory Unit (Versions without the -Vj Suffix)

    Error Probable Cause

    Flash memory error An error occurred duringinitialization of the

    Turn tOFF,

  • 5/23/2018 V062 E1 03 NT31 NT31C Setup Manual

    62/299

    NT31/NT31C or memoryunit flash memory, orduring write processing.

    recurswrite this ca

    Verify error An error occurred duringverification processing atthe flash memory of theNT31/NT31C or thememory unit.

    Turn tOFF, recurswrite this ca

    Connecting to the Host from th

  • 5/