VDE Pr - CONQUER FUSE fuses: pigtail leads 4 - 6.3 500Vdc 500 8 - 12 500Vac 100 8 - 12 500Vdc 500 12.1 - 25 500Vac 100 12.1 - 25 500Vdc 400 UFE 5.2 x 20 (0.20 x 0.79) 0.063 - 0.1 250Vac

VDE Prüf- und ZertifizierungsinstitutGutachten mit Fertigungsüberwachung

Ausweis-Nr. /Certificate No.

40017118

Blatt /Page

2

Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder

Conquer Electronics Co., Ltd., No. 15 Lane 120, Li Te Road, 11268 PEI TOU, TAIPEI, TAIWAN

Aktenzeichen / File ref. letzte Änderung / updated Datum / Date

2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14

Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 40017118.This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with factory surveillance No.40017118.

KleinstsicherungseinsatzSub-miniature fuse-linkMST seriesTyp(en) / Type(s)

MST series

BemessungsspannungRated voltage

AC 250 V

BemessungsstromRated current

40 mA; 50 mA

63 mA; 80 mA; 100 mA; 125 mA;160 mA; 200 mA; 250 mA; 315 mA;400 mA; 500 mA; 630 mA; 800 mA:1 A; 1,25 A; 1,6 A; 2 A; 2,5 A;3,15 A; 4 A; 5 A; 6,3 A

Normblatt IVmit Ausnahme der Abmessungen

Standard sheet with exception of the dimensions

Kennzeichnung der CharakteristikCharacteristic symbol

T

BemessungsschaltvermögenRated switching capacity

35 A (</= 3,15 A)10 x In (>3,15 A)

VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute A__________________________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0

Telefax +49 (0) 69 83 06-555



40017118

Blatt /Page

3




2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14


Anmerkung Die Anforderungen für die Bemessugnsströme 5 A und 6,3 Awaren die gleichen wie für 4 A

Remark The requirements of the rated currents 5 A und 6,3 A were thesame as of 4 A

__________________________________________________________________________________

Dieser Zeichengenehmigungs-Ausweis bildet eine Grundlage für die EG-Konformitätserklärung undCE-Kennzeichnung durch den Hersteller oder dessen Bevollmächtigten und bescheinigt die Konformität mit dengrundlegenden Schutzanforderungen der EG-Niederspannungsrichtlinie 2006/95/EG mit ihren Änderungen.This Marks Approval is a basis for the EC Declaration of Conformity and the CE Marking by the manufacturer orhis agent and proves the conformity with the essential safety requirements of the EC Low-Voltage Directive2006/95/EC including amendments.

VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet CC2Section CC2


Telefax +49 (0) 69 83 06-555



40017118

Beiblatt /Supplement




2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14

Dieses Beiblatt ist Bestandteil des Gutachtens mit Fertigungsüberwachung Nr. 40017118.This supplement is part of the Certificate of Conformity with factory surveillance No. 40017118.

KleinstsicherungseinsatzSub-miniature fuse-linkMST series

Fertigungsstätte(n)Place(s) of manufacture

Referenz/Reference30016828

Conquer ElectronicsCo., Ltd.No. 26 Wucyuan 5th RoadWugu Township248 TAIPEI COUNTYTAIWAN

Referenz/Reference30002671

Conquer ElectronicsCo., Ltd.No. 15 Lane 120, Li Te Road11268 PEI TOU, TAIPEITAIWAN

VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet CC2Section CC2


Telefax +49 (0) 69 83 06-555



40017118

Infoblatt /Info sheet

0




2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14


Genehmigung zum Benutzen des auf Seite 1 abgebildeten markenrechtlich geschützten Zeichens desVDE:

Grundlage für die Benutzung sind die Allgemeinen Geschäftsbedingungen (AGB) der VDE Prüf- undZertifizierungsinstitut GmbH (www.vde.com\AGB-Institut). Das Recht zur Benutzung erstreckt sich nur auf diebezeichnete Firma mit den genannten Fertigungsstätten und die oben aufgeführten Produkte mit denzugeordneten Bezeichnungen. Die Fertigungsstätte muss so eingerichtet sein, dass eine gleichmäßigeHerstellung der geprüften und zertifizierten Ausführung gewährleistet ist.Die Genehmigung ist so lange gültig wie die VDE-Bestimmungen gelten, die der Zertifizierung zu- grundegelegen haben, sofern sie nicht auf Grund anderer Bedingungen aus der VDE Prüf- und Zertifizierungsordnung(PM102) zurückgezogen werden muss.Der Gültigkeitszeitraum einer VDE-GS-Zeichengenehmigung kann auf Antrag verlängert werden. Beigesetzlichen und / oder normativen Änderungen kann die VDE-GS-Zeichengenehmigung ihre Gültigkeit zueinem früheren als dem angegebenen Datum verlieren.Produkte, die das Biozid Dimethylfumarat (DMF) enthalten, dürfen gemäß der Kommissionsent- scheidung2009/251/EG nicht mehr in den Verkehr gebracht oder auf dem Markt bereitgestellt werden.Der VDE-Zeichengenehmigungsausweis wird ausschließlich auf der ersten Seite unterzeichnet.

Approval to use the legally protected Mark of the VDE as shown on the first page:Basis for the use are the general terms and conditions of the VDE Testing and Certification Institute(www.vde.com\terms-institute). The right to use the mark is granted only to the mentioned company with thenamed places of manufacture and the listed products with the related type references. The place of manufactureshall be equipped in a way that a constant manufacturing of the certified construction is assured. The approval is valid as long as the VDE specifications are in force, on which the certification is based on,unless it is withdrawn according to the VDE Testing and Certification Procedure (PM102E).The validity period of a VDE-GS-Mark Approval may be prolonged on request. In case of changes in legal and /or normative requirements, the validity period of a VDE-GS-Mark Approval may be shortened.Products containing the biocide dimethylfumarate (DMF) may not be marketed or made available on the ECmarket according to the Commission Decision 2009/251/EC.The approval is solely signed on the first page.

Fuses, Supplemental - Component

Supplemental fuses

JDYX2.E82636

Fuses, Supplemental - Component Page Bottom

See General Information for Fuses, Supplemental - Component

CONQUER ELECTRONICS CO LTD E82636

26 WUCYUAN 5TH RD

WUGU

NEW TAIPEI, 248 TAIWAN

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

CQ40LF 10.1 x 3.12 x 1.25

(0.40 x 0.12 x 0.05)

1 - 30 600Vac 150

1 - 30 350Vdc 150

CQ40LT 10.1 x 3.12 x 1.25

(0.40 x 0.12 x 0.05)

0.5 - 30 600Vac 150

0.5 - 30 350Vdc 150

0.5 - 30 60Vdc 600

40 60Vdc 600

MEF 8.35 x 7.7

(0.33 x 0.30)

0.05 - 3.15 277Vac 35

4.0 - 5.0 277Vac 10x Ampere rating

6.3 277Vac 10x Ampere rating

MET 8.35 x 7.7

(0.33 x 0.30)

0.04 - 3.15 277Vac 35



UBM 5.2 x 20

(0.20 x 0.79)

0.063 - 3.15 250Vac 1500

4 - 6.3 250Vac 1500

8 - 10 250Vac 1500

UDA 5.2 x 20

(0.20 x 0.79)

0.5 - 0.8 250Vac 1500

1 - 3.15 250Vac 1500

4 - 10 250Vac 1500

10.1 - 12 250Vac 1500

12.1 - 16 250Vac 500

16.1 - 20 250Vac 400

20.1 - 25 250Vac 300

UDE 5.2 x 20

(0.20 x 0.79)

0.5 - 0.8 500Vac 100

0.5 - 0.8 500Vdc 1500

1 - 3.15 500Vac 100

1 - 3.15 500Vdc 1500

4 - 6.3 500Vac 100

Page 1 of 10JDYX2.E82636 - Fuses, Supplemental - Component

2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...

Supplemental fuses: pigtail leads

4 - 6.3 500Vdc 500

8 - 12 500Vac 100

8 - 12 500Vdc 500

12.1 - 25 500Vac 100

12.1 - 25 500Vdc 400

UFE 5.2 x 20

(0.20 x 0.79)

0.063 - 0.1 250Vac 35

0.125 - 3.15 250Vac 35

4.0 - 6.3 250Vac 100

8.0 - 10.0 250Vac 100

USL 5.2 x 20

(0.20 x 0.79)

0.063 - 0.1 250Vac 35

0.125 - 0.4 250Vac 35

UTE 5.2 x 20

(0.20 x 0.79)

0.5 - 3.15 250Vac 35

4.0 - 6.3 250Vac 100

8.0 - 10.0 250Vac 100

UTE (11-16A) 5.2 x 20

(0.20 x 0.79)

11 - 15 250Vac 100

16 250Vac 63

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

ABE (20.1A - 40A) 6.35 x 31.75

(0.25 x 1.25)

20.1 - 30 250Vac 100

20.1 - 30 125Vac 1000

20.1 - 30 125Vdc 400

20.1 - 30 75Vdc 1000

30.1 - 40 250Vac 1000

30.1 - 40 150Vdc 400

ABP (20.1A - 30A) 6.35 x 31.75

(0.25 x 1.25)

20.1 - 30 250Vac 100

20.1 - 30 125Vac 1000

20.1 - 30 125Vdc 400

20.1 - 30 75Vdc 1000

UBM-P 5.2 x 20

(0.20 x 0.79)

0.5 - 4 250Vac 1500

4.1 - 6.3 250Vac 1500

8 - 10 250Vac 1500

UBP, UBM-A 5.2 x 20

(0.20 x 0.79)

0.063 - 3.15 250Vac 1500

4 - 6.3 250Vac 1500

8 - 10 250Vac 1500

UDA-A 5.2 x 20

(0.20 x 0.79)

0.5 - 0.8 250Vac 1500

1 - 3.15 250Vac 1500

4 - 10 250Vac 1500

10.1 - 12 250Vac 1500

12.1 - 16 250Vac 500

16.1 - 20 250Vac 400



Supplemental fuses: pigtail leads, cartridge enclosed

20.1 - 25 250Vac 300

UDA-P 5.2 x 20

(0.20 x 0.79)

0.5 - 0.8 250Vac 1500

0.81 - 3.15 250Vac 1500

3.16 - 6.3 250Vac 1500

6.31 - 10 250Vac 1500

UDE-A 5.2 x 20

(0.20 x 0.79)

0.5 - 0.8 500Vac 100

0.5 - 0.8 500Vdc 1500

1 - 3.15 500Vac 100

1 - 3.15 500Vdc 1500

4 - 6.3 500Vac 100

4 - 6.3 500Vdc 500

8 - 12 500Vac 100

8 - 12 500Vdc 500

12.1 - 25 500Vac 100

12.1 - 25 500Vdc 400

UDP 5.2 x 20

(0.20 x 0.79)

0.5 - 0.8 250Vac 1500

1.0 - 3.15 250Vac 1500

4.0 - 10 250Vac 1500

UFP. UFE-A 5.2 x 20

(0.20 x 0.79)

0.063 - 0.1 250Vac 35

0.125 - 3.15 250Vac 35

4.0 - 6.3 250Vac 100

8.0 - 10.0 250Vac 100

USP, USL-A 5.2 x 20

(0.20 x 0.79)

0.063 - 0.1 250Vac 35

0.125 - 0.4 250Vac 35

UTE-P 5.2 x 20

(0.20 x 0.79)

0.5 - 3 250Vac 35


8.0 - 10 250Vac 10x Ampere rating

UTP, UTE-A 5.2 x 20

(0.20 x 0.79)

0.5 - 3.15 250Vac 35

4.0 - 6.3 250Vac 100

8.0 - 10.0 250Vac 100

UTP, UTE-A (11-16A) 5.2 x 20

(0.20 x 0.79)

11 - 15 250Vac 100

16 250Vac 63

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

ABB-A 6.35 x 32

(0.25 x 1.26)

1.0 - 20.0 500Vac 200

21.0 - 30.0 500Vac 100

1.0 - 20.0 500Vdc 200

21.0 - 30.0 500Vdc 100

ADP 6.35 x 31.8

(0.25 x 1.25)

8.1 - 30 32Vac 1000



Supplemental fuses: pigtail leads, filled-tube

Supplemental fuses: pigtail leads, filled-tube, cartridge enclosed

8.1 - 30 250Vac 200

AFP 6.35 x 31.8

(0.25 x 1.25)

12 - 30 250Vac 100

12 - 30 125Vac 200

12 - 30 32Vac 300

GBF-A 5.2 x 20

(0.20 x 0.79)

1.0 - 20.0 250Vac 200

PGU 3.9 x 11

(0.15 x 0.43)

0.25 - 6.3 250Vac 35


SDL-A 4.6 x 14.5

(0.18 x 0.57)

3.75 - 8.0 250Vac 200

SDP 4.6 x 14.5

(0.18 x 0.57)

3.75 - 8.0 250Vac 200

SMP 4.6 x 14.5

(0.18 x 0.57)

0.01 - 8.0 350Vac 100

0.01 - 3.5 140Vdc 100

UDL-A 5.2 x 20

(0.20 x 0.79)

0.5 - 6.3 250Vac 150

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

ABE (15.1A - 20A) 6.35 x 31.75

(0.25 x 1.25)

15.1 - 20 250Vac 750

15.1 - 20 125Vac 10000

15.1 - 20 250Vdc 750

ABE-A 6.35 x 31.75

(0.25 x 1.25)

15.1 - 20.0 250Vac 750

15.1 - 20.0 125Vac 10000

15.1 - 20.0 250Vdc 750

ABP (15.1A - 20A) 6.35 x 31.75

(0.25 x 1.25)

15.1 - 20 250Vac 750

15.1 - 20 250Vdc 750

15.1 - 20 125Vac 10000

PBU-P 3.59 x 90

(0.14 x 3.54)

0.5 - 3.15 250Vac 35

4 - 6.3 250Vac 10x Ampere rating

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

ADA 6.35 x 31.8

(0.25 x 1.25)

20.1 - 30 125Vac 10000

20.1 - 30 250Vac 1500

20.1 - 30 125Vdc 10000

APA, ADA-A 6.35 x 31.8

(0.25 x 1.25)

15.1 - 20 125Vac 10000

15.1 - 20 250Vac 400

20.1 - 30 125Vac 10000

20.1 - 30 250Vac 1500

20.1 - 30 125Vdc 10000

UBM-A 5.2 x 20

(0.20 x 0.79)

0.5 - 4 277Vac 1500



Supplemental fuses: cartridge enclosed

Supplemental fuses: filled-tube

Supplemental fuses: filled-tube, surface mount

5 - 6.3 277Vac 1500

8 - 10 277Vac 1500

12.5 - 16 277Vac 1500

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

ABB 6.35 x 32

(0.25 x 1.26)

1.0 - 20.0 500Vac 200

21.0 - 30.0 500Vac 100

1.0 - 20.0 500Vdc 200

21.0 - 30.0 500Vdc 100

ADL 6.35 x 31.8

(0.25 x 1.25)

8.1 - 30 32Vac 1000

8.1 - 30 250Vac 200

AFE 6.35 x 31.8

(0.25 x 1.25)

12 - 30 250Vac 100

12 - 30 125Vac 200

12 - 30 32Vac 300

AUE 10.3 x 38.1

(0.41 x 1.50)

4.0 - 30 32Vac 300

30.1 - 60 250Vac 150

AXE 6.35 x 25.4

(0.25 x 1.00)

12 - 20 32Vac 300

GBF 5.2 x 20

(0.20 x 0.79)

1.0 - 20.0 250Vac 200

UBM 5.2 x 20

(0.20 x 0.79)

10.1 - 12.5 250Vac 1500

12.6 - 16 250Vac 1500

UDL 5.2 x 20

(0.20 x 0.79)

0.5 - 6.3 250Vac 150

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

AXT 6.3 x 25.4

(0.25 x 1.00)

1 - 30 60Vac 3000

1 - 30 125Vac 3000

1 - 30 250Vac 3000

1 - 30 60Vdc 3000

1 - 30 125Vdc 3000

1 - 30 250Vdc 3000

30.1 - 50 60Vac 2000

30.1 - 50 125Vac 2000

30.1 - 50 250Vac 2000

30.1 - 50 60Vdc 2000

30.1 - 50 125Vdc 2000

30.1 - 50 250Vdc 2000

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)



Supplemental micro fuses

ALC 18.0 x 39.0

(0.71 x 1.54)

25 - 63 125Vdc 500

25 - 63 600Vac 1500

AUC 14 x 39

(0.55 x 1.54)

25 - 40 500Vac 1500

25 - 40 125Vdc 1000

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

CQ04PH 0.95 x 0.48 x 0.35

(0.04 x 0.02 x 0.01)

0.25 - 5 32Vdc 35

CQ04PV 0.95 x 0.48 x 0.35

(0.04 x 0.02 x 0.01)

0.25 - 5 32Vdc 35

CQ06LF 0.8 x 1.6

(0.03 x 0.06)

1 - 8 63Vdc 35

1 - 8 32Vdc 60

CQ06LT 0.8 x 1.6

(0.03 x 0.06)

1 - 8 63Vdc 35

1 - 8 32Vdc 60

CQ06PF 1.6 x 0.8 x 0.48

(0.06 x 0.03 x 0.02)

0.5 - 5 63Vac 100

0.5 - 5 32Vac 100

0.5 - 5 63Vdc 100

0.5 - 5 32Vdc 100

CQ06PH 1.6 x 0.8 x 0.48

(0.06 x 0.03 x 0.02)

0.5 - 5 63Vac 100

0.5 - 5 32Vac 100

0.5 - 5 63Vdc 100

0.5 - 5 32Vdc 100

CQ06PT 1.6 x 0.8 x 0.48

(0.06 x 0.03 x 0.02)

0.5 - 5 63Vac 100

0.5 - 5 32Vac 100

0.5 - 5 63Vdc 100

0.5 - 5 32Vdc 100

CQ06PV 1.6 x 0.8 x 0.48

(0.06 x 0.03 x 0.02)

0.5 - 5 63Vac 100

0.5 - 5 32Vac 100

0.5 - 5 63Vdc 100

0.5 - 5 32Vdc 100

CQ12LF 3.1 x 1.6 x 1.1

(0.12 x 0.06 x 0.04)

1 - 8 63Vdc 100

1 - 8 125Vac 50

1 - 8 125Vdc 50

1 - 8 32Vac 150

10 - 20 24Vdc 150

CQ12LH 3.1 x 1.6 x 0.9

(0.12 x 0.06 x 0.04)

10 - 20 24Vdc 150

1 - 8 32Vac 150

1 - 8 125Vac 50

1 - 8 63Vdc 100

1 - 8 125Vdc 50



CQ12LT 3.1 x 1.6 x 1.1

(0.12 x 0.06 x 0.04)

1 - 8 63Vdc 100

1 - 8 125Vac 50

1 - 8 125Vdc 50

1 - 8 32Vac 150

10 - 20 24Vdc 150

CQ12LV 3.1 x 1.6 x 0.9

(0.12 x 0.06 x 0.04)

10 - 20 24Vdc 150

1 - 8 32Vac 150

1 - 8 125Vac 50

1 - 8 63Vdc 100

1 - 8 125Vdc 50

CQ12PF 3.1 x 1.6 x 0.72

(0.12 x 0.06 x 0.03)

0.5 - 7 63Vac 100

0.5 - 7 32Vac 100

0.5 - 7 63Vdc 100

0.5 - 7 32Vdc 100

CQ12PH 3.1 x 1.6 x 0.72

(0.12 x 0.06 x 0.03)

0.5 - 7 63Vac 100

0.5 - 7 32Vac 100

0.5 - 7 63Vdc 100

0.5 - 7 32Vdc 100

CQ12PT 3.1 x 1.6 x 0.72

(0.12 x 0.06 x 0.03)

0.5 - 7 63Vac 100

0.5 - 7 32Vac 100

0.5 - 7 63Vdc 100

0.5 - 7 32Vdc 100

CQ12PV 3.1 x 1.6 x 0.72

(0.12 x 0.06 x 0.03)

0.5 - 7 63Vac 100

0.5 - 7 32Vac 100

0.5 - 7 63Vdc 100

0.5 - 7 32Vdc 100

CQ24LF 6.1 x 2.6 x 1.1

(0.24 x 0.10 x 0.04)

1 - 20 125Vdc 100

1 - 20 32Vdc 300

1 - 20 125Vac 100

1 - 20 277Vac 100

1 - 20 350Vac 100

CQ24LT 6.1 x 2.6 x 1.1

(0.24 x 0.10 x 0.04)

1 - 20 125Vdc 100

1 - 20 32Vdc 300

1 - 20 125Vac 100

1 - 20 277Vac 100

1 - 20 350Vac 100

CQ24PF 6.1 x 2.6 x 1.15

(0.24 x 0.10 x 0.05)

0.5 - 12 350Vac 100

0.5 - 12 350Vdc 100

CQ24PT 6.1 x 2.6 x 1.15

(0.24 x 0.10 x 0.05)

0.5 - 12 350Vac 100

0.5 - 12 350Vdc 100

MSF 8.35 x 4.3 x 7.7 0.05 - 3.15 250Vac 35



Supplemental micro fuses: pigtail leads

(0.33 x 0.17 x 0.30)



MST 8.35 x 4.3 x 7.7

(0.33 x 0.17 x 0.30)

0.04 - 5.0 300Vac 50

0.04 - 5.0 400Vac 100

0.04 - 5.0 250Vdc 100

0.04 - 5.0 250Vac 130

6.3 - 10.0 300Vac 50

6.3 - 10.0 400Vac 100

6.3 - 10.0 250Vdc 100

6.3 - 10.0 250Vac 130

0.04 - 3.15 250Vac 35



SEF 2.6 x 6.1

(0.10 x 0.24)

6 - 8 125Vac 50

6 - 8 125Vdc 50

6 - 8 32Vdc 300

10 125Vac 35

10 32Vdc 300

10 125Vdc 50

12 - 25 65Vac 50

12 - 25 65Vdc 50

12 - 25 24Vdc 300

12 - 25 86Vac 200

12 - 25 86Vdc 200

SEF(U) 6.2 x 2.6 x 2.6

(0.24 x 0.10 x 0.10)

0.062 - 8 125Vac 50

0.062 - 8 32Vdc 300

10 125Vac 35

10 125Vdc 50

10 32Vdc 300

12.0 - 15.0 65Vac 50

12.0 - 15.0 65Vdc 50

12.0 - 15.0 24Vdc 300

SET 6.2 x 2.6 x 2.6

(0.24 x 0.10 x 0.10)

0.2 - 7.0 125Vac 50

0.2 - 7.0 125Vdc 50

0.2 - 7.0 32Vdc 300

SET(U) 2.6 x 6.1

(0.10 x 0.24)

0.2 - 5 125Vac 50

0.2 - 5 125Vdc 50

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

PBU 3.6 x 10

(0.14 x 0.39)




Supplemental micro fuses: surface mount

Supplemental micro fuses: time delay, surface mount

(a) - Size (mm) of the models was derived from encapsulating, excluding pigtails.

4.0 - 6.3 250Vac 35

PDU 3.6 x 10

(0.14 x 0.39)

0.25 - 6.3 250Vac 35


PDU-P 3.6 x 10

(0.14 x 0.39)

0.25 - 3 250Vac 35


PEP (a) 3.5 x 13.5

(0.14 x 0.53)

0.1 - 5.0 250Vac 50

PFP (a) 3.2 x 8.6

(0.13 x 0.34)

0.1 - 7.0 125Vac 50

7.1 - 10.0 125Vac 50

0.1 - 7.0 125Vdc 300

7.1 - 10.0 125Vdc 300

10.1 - 15.0 32Vac 50

10.1 - 15.0 32Vdc 300

PMP (a) 3.5 x 13.5

(0.14 x 0.53)

0.375 - 7.0 250Vac 50

0.375 - 7.0 125Vdc 50

PSP (a) 3.5 x 13.5

(0.14 x 0.53)

0.5 - 5.0 125Vac 50

0.5 - 5.0 125Vdc 50

PTU 4.0 x 10.0

(0.16 x 0.39)

0.25 - 3.15 250Vac 35


PTU-P 3.6 x 10

(0.14 x 0.39)

0.25 - 3 250Vac 35


Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

04CF 1.05 x 0.58 x 0.43

(0.04 x 0.02 x 0.02)

0.3 - 5 32Vdc 35

04CT 1.05 x 0.58 x 0.43

(0.04 x 0.02 x 0.02)

0.3 - 5 32Vdc 35

06CF 1.7 x 0.9 x 0.55

(0.07 x 0.04 x 0.02)

0.2 - 1 32Vdc 50

1.25 - 5 32Vdc 35

06CT 1.7 x 0.9 x 0.55

(0.07 x 0.04 x 0.02)

0.2 - 1 32Vdc 50

1.25 - 5 32Vdc 35

12CT 3.5 x 1.5 x 0.8

(0.14 x 0.06 x 0.03)

0.2 - 7 32Vac 50

0.2 - 7 63Vdc 50

Cat. No.

Size

mm(in)

Amps

(A)

Volts

(V)

Interrupting Rating

(A)

12CF 3.5 x 1.5 x 0.8

(0.14 x 0.06 x 0.03)

0.2 - 7.0 32Vac 50

0.2 - 7.0 63Vdc 50



Marking: Company name or tradename "CO" , "CONQ" , "CONQUER" and model designation.

� 2013 UL LLCWhen the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment database

for additional information regarding this product's certification.

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured

under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up

Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide

Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the

data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the

extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2013 UL LLC".

Last Updated on 2013-07-03

Questions? Print this page Terms of Use Page Top



Supplemental fuses, Ceramic Cartridge Fuses, non-renewable:

� Type ADA and APA (pigtail): 6.35 by 31.75mm, 15.1-20A, 125/250V ac, IR 125V ac - 10kA; IR 250V ac - 750A.

� Type ABE and ABP (pigtail): 6.35 by 31.75mm, 15.1-25A, 125/250V ac, IR 125V ac - 1000A; IR 250V ac - 200A.

� Types GBM and GBP (pigtail): 5.2 by 20mm, 12.1 - 15A, 125/250V ac, IR 125V ac - 10kA; IR 250V ac - 200A.

� Types GDA and GPA (pigtail): 5.2 by 20mm, 12.1 - 15A, 125/250V ac, IR 125V ac - 10kA; IR 250V ac - 200A.

� Types UDA and UDA-A (pigtail): 5.2 by 20mm, 800mA - 10A, 250V ac, IR 250V ac - 1500A, p.f.0.7-0.8.

� Types UBM and UBM-A (pigtail): 5.2 by 20mm, 63mA-10A, 250V ac, IR250V ac-1500A, p.f. 0.7-0.8.

� Type PTU (Pigtail): 3.88 by 11 mm, 250mA-6.3A, 250V ac, IR 250V-35A or 10In whichever is greater, p.f. 0.7-0.8.

Supplemental fuses, Glass Cartridge Fuses, non-renewable:

� Type GTE and GTP (pigtail): 5.2 by 20mm, 3.6 - 10A; 125/250V ac, IR 125V ac - 400A; IR 250V ac - 100A.

� Types USL and USL-A (pigtail): 5.2 by 20mm, 63mA -400mA; 250V ac, IR 250V-35A; � Types UTE and UTE-A (pigtail): 5.2 by 20mm, 500mA -10A; 250V ac, IR 250V-35A or 10 In

whichever is greater (In-Fuse rated current); � Types UFE and UFE-A (pigtail): 5.2 by 20mm, 63mA -10A; 250V ac, IR 250V-35A or 10 In

whichever is greater. � Type PBU(Pigtail): 3.88 by 11mm, 50mA-6.3A, 250V ac, IR 250V-35A or 10In whichever is greater,

pf 0.7-08

Supplemental Microfuses, non-renewable:

� Type MEF, rated 50mA-6.3A, 250V ac, IR 250V ac-35A or 10 In which is greater (In-rated nominal current of the fuse)

� Type MET, rated 40mA-6.3A, 250V ac, IR 250V ac-35A or 10 In whichever is greater. � Type SEF, 2.6 by 6.2mm ceramic cartridge fuses, 10.1 - 15A, 65V ac/dc, 24V dc; IR 65V ac/dc - 50A,

IR 24V dc - 300A. � Type MST, 8.45 by 7.85 by 4.25mm, 40mA - 6.3A, 250V ac, IR 250-35A or 10 In* which ever is

greater (In - rated nominal current of the fuse). � Type MSF, 8.45 by 785 by 4.25mm rated 50mA-6.3A, 250V ac, IR250-35A 10 In* whichever is

greater (* In - rated nominal current of the fuse).

Certification Record

CUSTOMER CLASS FILE

Conquer Electronics Co., Ltd. 1422-30 058630_0_000

No. 26, Wucyuan 5th Rd., Wuagu Township

FUSES-Supplemental Fuses - Component Acceptance

Taipei County

248

Taiwan Refer to Class Description for program details

Copyright © 2013 CSA International. All rights reserved.

Page 1 of 1

2013/3/13http://directories.csa-international.org/xml_transform.asp?xml=certxml\058630_0_000...

Documents

VDE Pr - CONQUER FUSE fuses: pigtail leads 4 - 6.3 500Vdc 500 8 - 12 500Vac 100 8 - 12 500Vdc 500 12.1 - 25 500Vac 100 12.1 - 25 500Vdc 400 UFE 5.2 x 20 (0.20 x 0.79) 0.063 - 0.1 250Vac