Aufbauthemen Schwenkbearbeitung | Einen Raumwinkel programmieren - 1267064
2.1 Einen Raumwinkel programmieren -
1267064
744
650
A4
- --DR. JOHANNES HEIDENHAIN GmbH83301 Traunreut, Germany
-0.3 +0.3
D
30
60
60
30
15
30
25
15
6
5
80
40
ID number
Text: Change No. C000941-05Phase: Nicht-Serie
Original drawing Klotz Werkstoff:Material:Scale Format
RoHS 1:1 A4 BlockMaße in mm / Dimensions in mm Einzelteilzeichnung / Component Drawing blanke Flächen/Blank surfaces Werkstückkanten nach ISO 13715Workpiece edges ISO 13715
Allgemeintoleranzen ISO 2768-mH 6mm: 0,2General tolerances ISO 2768-mH 6mm: 0,2
Tolerierung nach ISO 8015Tolerances as per ISO 8015
Oberflächen nach ISO 1302Surfaces as per ISO 1302
Oberflächenbehandlung:Surface treatment:
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. ( ISO 16016 )
Created Responsible Released Version Revision Sheet Page
1267064 00 A 01 1of1
M-TS
17.09.2018 Document number
A
1:1A
2
TNC 320 / TNC 620 / TNC 640 | HIT-Lernpaket Fräsen – 3+2-Achsbearbeitung | 8/2019 11
Aufbauthemen Schwenkbearbeitung | Einen Raumwinkel programmieren - 1267064
744
650
A4
- --DR. JOHANNES HEIDENHAIN GmbH83301 Traunreut, Germany
-0.3 +0.3
34.641
(Q218=+35)
15
(Q227=+15)
60(Q
219=
+60)
35
ID number
Text: Change No.Phase:
Original drawing Werkstoff:Material:Scale Format
RoHS 1:1 A4Maße in mm / Dimensions in mm Dokumentenart / Document type blanke Flächen/Blank surfaces
Werkstückkanten nach ISO 13715Workpiece edges ISO 13715
Allgemeintoleranzen ISO 2768-mH 6mm: 0,2General tolerances ISO 2768-mH 6mm: 0,2
Tolerierung nach ISO 8015Tolerances as per ISO 8015
Oberflächen nach ISO 1302Surfaces as per ISO 1302
Oberflächenbehandlung:Surface treatment:
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. ( ISO 16016 )
Created Responsible Released Version Revision Sheet Page
00 A 02 1of3Document number
CS (LBL 81)
W
CS (LBL 81)
CYCL CALL
W
D
C000941-05Nicht-Serie
Klotz
Block
1267064M-TS
17.09.2018
2
TNC 320 / TNC 620 / TNC 640 | HIT-Lernpaket Fräsen – 3+2-Achsbearbeitung | 8/2019 12
Aufbauthemen Schwenkbearbeitung | Einen Raumwinkel programmieren - 1267064
744
650
A4
- --DR. JOHANNES HEIDENHAIN GmbH83301 Traunreut, Germany
-0.3 +0.3
60(Q
219=
+60)
45
30(Q
218=
+30)
15(Q227=+15)
ID number
Text: Change No.Phase:
Original drawing Werkstoff:Material:Scale Format
RoHS 1:1 A4Maße in mm / Dimensions in mm Dokumentenart / Document type blanke Flächen/Blank surfaces
Werkstückkanten nach ISO 13715Workpiece edges ISO 13715
Allgemeintoleranzen ISO 2768-mH 6mm: 0,2General tolerances ISO 2768-mH 6mm: 0,2
Tolerierung nach ISO 8015Tolerances as per ISO 8015
Oberflächen nach ISO 1302Surfaces as per ISO 1302
Oberflächenbehandlung:Surface treatment:
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. ( ISO 16016 )
Created Responsible Released Version Revision Sheet Page
00 A 2of
Document number
CS (LBL 82)
CYCL CALL
CS (LBL 82)CYCL CALL
W
W
023
D
C000941-05Nicht-Serie
Klotz
Block
1267064M-TS
17.09.2018
2
TNC 320 / TNC 620 / TNC 640 | HIT-Lernpaket Fräsen – 3+2-Achsbearbeitung | 8/2019 13
Aufbauthemen Schwenkbearbeitung | Einen Raumwinkel programmieren - 1267064
744
650
A4
- --DR. JOHANNES HEIDENHAIN GmbH83301 Traunreut, Germany
-0.3 +0.3
17
60(Q
219=
+60)
45
16.551(Q218=-17)
6.33
9(Q
227=
+6.5
)
ID number
Text: Change No.Phase:
Original drawing Werkstoff:Material:Scale Format
RoHS 1:1 A4Maße in mm / Dimensions in mm Dokumentenart / Document type blanke Flächen/Blank surfaces
Werkstückkanten nach ISO 13715Workpiece edges ISO 13715
Allgemeintoleranzen ISO 2768-mH 6mm: 0,2General tolerances ISO 2768-mH 6mm: 0,2
Tolerierung nach ISO 8015Tolerances as per ISO 8015
Oberflächen nach ISO 1302Surfaces as per ISO 1302
Oberflächenbehandlung:Surface treatment:
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. ( ISO 16016 )
Created Responsible Released Version Revision Sheet Page
00 A 3of
Document number
CS (LBL 83)
CYCL CALL
CS (LBL 83)CYCL CALL
W
W
023
D
C000941-05Nicht-Serie
Klotz
Block
1267064M-TS
17.09.2018
2
TNC 320 / TNC 620 / TNC 640 | HIT-Lernpaket Fräsen – 3+2-Achsbearbeitung | 8/2019 14
Aufbauthemen Schwenkbearbeitung | Einen Raumwinkel programmieren - 1267064
Arbeitsplan
Rohteildefinition
Werkzeugaufruf
Schräge 30° fräsen
Schräge 90° fräsen
Schräge 25° fräsen
Werkzeugaufruf
Bohrungen fertigen
NC-Programm beenden
Unterprogramme definieren
Programmvorgaben
Planfräsen (Schruppen) Vorgaben X Y Z
Frässtrategie 2, im Gleichlauf
Fräsrichtung 2, parallel zur Y-Achse
Vorpositionierungsvorschub Maximaler Vorschub
Begrenzung
30°
90°
25°
-
+1, positive Hauptachse
-1, negative Hauptachse
Bohren Vorgaben X Y Z
Zustelltiefe 5
Bezug Tiefe auf zylindrischen Teil des Bohrers
(ohne Werkzeugspitze)
Allgemeine Parameter Vorgaben X Y Z
Sichere Position - - +50
Sichere Schwenkposition bezogen auf Maschinen-Nullpunkt +300 -300 +300
Werkzeugvorgaben
Ø T S F1 DZ IZ
20 10 5000 1000 -5 5
6 228 6000 840 -5 5
Ø) Durchmesser
T) Werkzeugnummer
S) Drehzahl
F1) Bearbeitungsvorschub
DZ) max. Bearbeitungstiefe / Bohrtiefe
IZ) Zustellung
2
TNC 320 / TNC 620 / TNC 640 | HIT-Lernpaket Fräsen – 3+2-Achsbearbeitung | 8/2019 15