Order Catalogue FERCO
Builder’s Hardwarefor aluminium windows and doors
1995 bescheinigte die AGQS e.V. derGretsch-Unitas GmbH Baubeschlägedie erfolgreiche Einführung einesQualitätssicherungssystemsentsprechend DIN ISO 9001.Die Herstellung von Qualitätsproduktenist für G.U ein beständiges Anliegen.Die Zertifizierung bestätigt, dass auchdie betriebsinternen Abläufe - von derEntwicklung bis zum Vertrieb undKundenservice - mit diesem Anliegenübereinstimmen.
Qualité:G.U certifié avecsuccèsLa norme DIN ISO9001 définit lesexigences à lastructure et le modede travail del’entreprise et de sagestion de qualité.
Quality:G.U successfully certifiedDIN ISO 9001 defines the requirements tostructure and working methods of the enter-prise and its quality management.In 1995 the committee AGQS e.V. hascertified the successful introduction of a qualitymanagement system according to DINISO 9001 in the company Gretsch-Unitas GmbHBaubeschläge.The production of quality hardware is a perma-nent concern for G.U. The certificate confirmsthat the internal cooperation of the company -from product development to distribution andcustomer's service - also corresponds to thisconcern.
En 1995 le comitéAGQS e.V. a certifié l’introductionavec succès d’un système demanagement de qualité conforme àla norme DIN ISO 9001 dans laSociété Gretsch-Unitas GmbHBaubeschläge.La fabrication de produits de qualitéest un but permanent pour G.U.Le certificat confirme que la coopéra-tion interne de la Société - du déve-loppement des produits jusqu’à ladistribution et le service pour lesclients - correspond égalementà ce but.
Quality: G.U successfully certified
DIN ISO 9001definiert die Anfor-derungen an dieStruktur und Arbeits-weise des Unter-nehmens und seinesQualitäts-managements.
Qualität:G.U erfolgreichzertifiziert
FERCO
1
FERCOContents
Builder’s Hardware for aluminium windows and doors
PageSliding-Folding fittingsDesigns, sash arrangement according to schemes 63Optional parts, handles 64Drilling and milling dimensions, assembly dimensions 67Locking and supporting plates 68Assembly dimensions 69Sliding-Folding fittingsG.U-822, inward opening,
with side hung sash locking mechanism 70G.U-825, inward opening,
with side hung sash locking mechanism 74Locking parts according to profile system 78Drilling jigs 79
Lift-Sliding and Lift-Tilt-Sliding fittingsDesigns, application, sash arrangement
according to schemes 80Optional parts, handles 81Lift-Sliding fittings G.U-933 83Lift-Tilt-Sliding fittings G.U-953 85
Fan-light Openers, face-fixedDesigns, application 86Optional parts 87Fan-light Opener VENTUS F 200, standard version
with lever handle 89with vertical and corner gears 90with electric drives ELTRAL 91with lever handle and additional side locking 92with flexible transmission for arch headand segmental arch head windows 93for oblique angle head windows 95
Flexible transmission, special versions 96Individual and total rod lengths for lever handle 97Standard version for top hung outward opening windows
with lever handle 98with vertical and corner gears 99with electric drives ELTRAL 100
Electric drives 230 V 101Accessories for electric drives 230 V 102
Horizontal and Vertical Pivot fittingsDesigns, application 103Optional parts 104Horizontal Pivot fittings UNITAS 18 105Vertical Pivot fittings UNITAS 88 106
Small window fittings for tilt and top hung windowsDesigns 107G.U Security Stay EURO-SOLID 108Rebate and cleaning stays 109Rebate stays, window friction stay EGO-B 110
Overhead door closers OTS 230 and OTS 330with tooth drive and scissor action arms 111
Overhead door closer OTS 530 with rack and pinion driveand scissor action arms to DIN 18 263, part 2 112
Overhead door closer OTS 630with linear drive and slide channel 113
Overhead door closer OTS 730 with linear driveand slide channel to DIN 18 263, part 2 114
Rebate door closers FTS 20 and FTS 24fo concealed installation in the vertical door rebate 115
PageProduction programme 2
Tilt-turn and Side hung fittingsDesign, application 4Optional parts 5Composition of fittings according to schemes 8Drilling and milling dimensions, assembly dimensions 9Tilt-turn fittings JET AK 8
with geared handle 11with mill-in gear 12
Side hung fittings JET AK 8with geared handle 13with mill-in gear 14
Inactive sash fittings JET AK 8 15Tilt sash fittings JET AK 8 18Axial hinges 19
Multi point locking system for large area outward openingaluminium windows installed in glazed façadesMain characteristics 207 point locking system for outward opening windows 214 point locking system for outward opening windows 22Drilling and milling dimensions 23
Safety Door Locks G.U-SECURYDesigns 25Optional parts, accessories 26General use, installation and maintenance advice
for locks and furniture 27Safety Door Locks G.U-SECURY Automatic 28Safety Door Locks G.U-SECURY Automatic with A-opener 29G.U-SECURY COMFORT 30Safety Door Locks G.U-SECURY Automatic
with anti-panic function 31Safety Door Locks G.U-SECURY Automatic
with Safe-T-Catch 32Safety Door Locks G.U-SECURY SB 2 and SB 2
with Safe-T-Catch 33Safety Door Locks G.U-SECURY SH 2 and SH 2
with Safe-T-Catch 34Optional parts, accessories 35Latch plates and catch plates 36Locking plates 37Monobloc furniture with DIRIGENT handles 38
Profile cylinders Series 8800, janus cylinder system 40
INLINE Sliding fittingsDesigns 41Gear, backset 15 mm 42Gear, backset 7.5 mm 43Locking handles EURIS 44
Parallel Slide and Tilt fittingsDesigns 45Optional parts, handles 46Sash arrangement according to schemes 50Assembly, drilling and milling dimensions 51Drilling and assembly jigs 55Parallel Slide and Tilt fittings G.U-968/200 mZ
with geared handle inside 56with cylinder gear, lockable 57
Parallel Slide and Tilt fittings G.U-968/150 mZwith geared handle inside 58with cylinder gear, lockable 59
Parallel Slide and Tilt fittings G.U-968/150 oZwith geared handle inside 60with mill-in gear, lockable 61
Positioning and locking plates according to profile system 62
2
FERCOProduction programme
for aluminium windows and doors
Function Fitting Application Max. sashmodels Sash width mm Sash height mm weight kg
Tilt-turn JET AK 8 355 - 1700 500 - 2400 80fittings
Side hung JET AK 8 355 - 1700 500 - 2400 80fittings
Tilt sash JET AK 8fittings
Handles SPACIO Handles DIRIGENT-F
Profile cylinders Series 8800High securitycylinder system janus
Sliding INLINEfittings
Safety Door G.U-SECURY 1730 - 2285Locks with Automatic, SB 2, SH 2additional Backset 35, 40, 45 mmdeadbolts Centres 92 mm
Door handle Monobloc-sets DIRIGENT
Parallel G.U-968/200 mZ 740 - 2000 895 - 2400 200*Slide and Tilt G.U-968/150 mZ 740 - 1600 895 - 2400 150fittings G.U-968/150 oZ 600 - 1600 730 - 2400 130
(* according to prescription of G.U)
As a specialist for builder's hardware and ventilationtechniques Gretsch-Unitas is the professional leaderin many product ranges since a couple of years. Themanifold production programme for suitable builder's
hardware and ventilators with advanced conceptionsand functions make the company respected in thedaily competition.
3
FERCOProduction programme
for aluminium windows and doors
pivot fittings
Sound UNITAS 100, 150 Window installationabsorbingventilators
Small window Rebate and Window installationfittings cleaning stays,
friction stays
Overhead OTS 230, 330, 530,door closers OTS 630, 730Floor springs UTS 82, 85
Function Fitting Application Max. sashmodels Sash width mm Sash height mm weight kg
Sliding-Folding G.U-822, -825 400 - 1000 850 - 2350 80fittings
Lift-Sliding G.U-933 720 - 3300 800 - 2280 250fittings
Lift-Tilt-Sliding G.U-953 720 - 3000 800 - 2280 250fittings
Face-fixed fan- VENTUS F 200 400 - 3600 250 - 80light openers VENTUS F 300 620 - 3600 350 - 200Concealed fan-light opener VENTUS EVZ 18 600 - 2400 350 - 80
Smoke and heat RWA-EMB, -EM Ventilation by specific operation systemsevacuating Preventiveinstallations fire protection
Horizontal UNITAS 18 175pivot fittings
Vertical UNITAS 88 175
4
FERCO
ApplicationRange of applications for JET Tilt-turn and Side hung fittings:– Single-sash windows and doors– Double-sash windows and doors without mullion– Single-sash doors, lockable– Double-sash doors, lockable, without mullion
DesignTilt-turn and Side hung fittings JET AK 8Clampable fittings for windows and doors with 21 mm rebate clearance,Euro-groove 15/20 mm on the sash and groove 14/18 on the frame.Sash weight up to 80 kg. Corner bearing adjustable: height + 2.5 mmor - 1.5 mm, laterally ± 1 mm; stay arm adjustable ± 3 mm; sash pressureadjustable ± 1 mm.
HandlesThe geared handles are made of aluminium with concealed fixings. Therosettes have a robust retention feature. An additional wrong operationsafety device is fixed together with the geared handle. Lockable andremovable handles as well as handles with extended carrier completethe programme.
Standard coloursEV 1 Anodized, natural colourUC 5 Anodized, dark bronze colour
(locking parts concealed in the rebate: silver colour)Black Powder-coated in black satin finish (RAL 9005)
(locking parts concealed in the rebate: silver colour)White Powder-coated in white colour (RAL 9016 or RAL 9010)
(locking parts concealed in the rebate: silver colour)
Locking mechanismThe fittings are concealed within the rebate with one handle operation.All locking parts are adapted to the Euro-groove 15/20 mm. The lockingpins of the gear parts, stay arms and corner transmissions are adjust-able. The clampable locking plates are also adjustable and ensure anoptimized sash pressure. From a width of 1400 mm the sashes areequipped with an additional stay arm. The corner transmissions areprovided with rust-proof 4-leaf stainless steel spring assemblies.
Materials, surface sealing ferGUard* silver andferGUard* yellowThe fitting parts are made of high quality steel, zinc die-casting andaluminium alloys.According to the material they are protected against corrosion by thesurface sealing ferGUard* silver or ferGUard* yellow, aluminium partsare anodized.
AbbreviationsG Gear position for standard sashGIA Gear position for inactive sashIA Inactive sashL LengthML Middle lockPU Packing unitSD Side hung window or doorSH Sash heightST Sash thicknessSW Sash widthTT Tilt-turn window or door
Article NumbersExampleArticle No.6-24533-00-0-*
6-24533- - - Part number- -00- - Size- - -L- Left hand assembly- - -R- Right hand assembly- - -0- Usable on both sides- - - -1T Nickel silver- - - -1 F 1/EV 1, natural or silver colour, zinc die-casting
parts galvanized and blue bichromated- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass or brass colour, steel
parts galvanized and yellow bichromated- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black, powder-coated (RAL 9005)- - - -7 White, powder-coated (RAL 9016)- - - -7T White, powder-coated (RAL 9010)- - - -8 Stainless steel oder inox colour- - - -* Surface treatment variable (see price-list)
for aluminium windows and doors
Tilt-turn and Side hung fittings
ApplicationFittings Opening Rebate Max. sash Sash Sash Space requirement Standard
type clearance weight width height hinge side bottom assemblymm kg SW mm SH mm mm mm drawing
JET AK 8 TT 21 80 355-1700 500-2400 17 3 0.44170.1Tilt-turn fittingsJET AK 8 SD 21 80 355-1700 500-2400 17 3Side hung fittingsJET AK 8 IA 21 80 355-1700 500-2400 17 3Inactive sash fittings
5
FERCO
Additional stay arm for tilt-turn sashesK-12964-00-0-1
Bag of limiting stay with friction sliderArm length 150 mmFrame groove 14/18 G-12952-14-0-1Arm length 250 mmFrame groove 14/18 G-12953-14-0-1
Bag of concealed blocking lock without keyFrame groove 14/18G-12996-00-0-0
Key for blocking lock8-00771-00-0-3
Bag of door catchK-12962-00-0-1
JET Slit ventilation catch forwindows with sash overlapK-12223-90-0-*JET Slit ventilation catch forflush windowsK-12216-90-0-*Drilling jig for JETSlit ventilation catch6-23861-00-0-0
Bag of screw-on blocking lockwith key K-12968-00-0-*
Carrier roller, singlefor one-piece push rodG-14694-00-0-0
Locking pin, singleA-02823-00-0-0
Carrier roller, singlefor two-piece push rodG-11669-00-0-0
Optional parts
for Tilt-turn and Side hung fittings JET AK 8
Key 6-23903-38-0-0for inactive sash gear6-24680-00-0-1
6
FERCO
Bag of geared handle SPACIO,with fixing screwsG-46551-00-0-*
Optional parts
Geared handles SPACIO for tilt-turn and side hung sashes, accessoriesGeared handles SPACIO, aluminium with lacquer finish1 carrier 22 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handle SPACIO,with fixing screws and 2 keysG-46553-00-0-*
Bag of geared rosette SPACIO,with fixing screwsG-46555-00-0-*Removable handle SPACIOG-18888-00-0-*
Bag of geared handle SPACIO,with fixing screwsG-46595-00-0-*
Geared handles SPACIO, aluminium with lacquer finish1 carrier 33 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handle SPACIO,with fixing screws and 2 keysG-46597-00-0-*
Bag of geared rosette SPACIO,with fixing screwsG-46596-00-0-*Removable handle SPACIOG-18888-00-0-*
Bag of geared handle SPACIO,right hand, with fixing screwsG-46552-00-R-*
Geared handles SPACIO, aluminium with lacquer finish2 carriers 22 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handle SPACIO,right hand, with fixing screwsand 2 keysG-46554-00-R-*
Bag of geared rosette SPACIO,right hand, with fixing screwsG-46556-00-R-*Removable handle SPACIOG-18888-00-0-*
Bag of accessories forconversion of handlesonly delivered right handinto left handG-46550-00-L-1
7
FERCO
Handle DIRIGENT-Fwithout spindle6-28072-00-0-*
Handles DIRIGENT-F for mill-in gears
Handle DIRIGENT-FSpindle 296-28072-29-0-*
Handle DIRIGENT-F/Zwith push-buttoncylinder, all keys alikeSpindle 296-28075-29-0-*
In- and outside operationCountersunk screw M 5ST 51-60 9-13255-60ST 61-70 9-13255-70ST 71-80 9-13255-80
Inside operationCountersunk screwM 5 x 35 9-13255-35
Removable handleDIRIGENT-F/SGSpindle 338-00694-33-0-*
Handle DIRIGENT-F/AFoutside, flat6-25223-00-0-*
Handle DIRIGENT-F/Aoutside6-25993-00-0-*
Rosette insidewith cylinder bore6-25224-02-0-*
Rosette outsidewith cylinder bore9-32407-02-0-*
SpindleST 51-68 9-26874-56-0-1ST 69-80 9-26874-69-0-1
Rosette/F inside, flat6-24913-00-0-*
Mill-in gear, 180°with wrong operationsafety deviceBackset 25-50 mm6-25917-**-0-1
Locking elementwith cylinder boreBackset 25-50 mm6-25918-**-0-1
Pull handle,outside9-22921-00-0-*
Mill-in gear, 90°Backset 25-50 mm6-25948-**-0-1
Mill-in gear, 180°Backset 25-50 mm6-25916-**-0-1
Optional parts
Mill-in gear, 180°with wrong operationsafety device fortilt-turn sashesBackset 14 mm6-30534-00-0-1
** Available backsets: 25 - 35 - 40 - 45 - 50 mm
Mill-in gear, 180°without wrong operationsafety device for sidehung and tilt sashesBackset 14 mm6-31280-00-0-1
8
FERCO
Tilt-turn windows and doorsComposition of fittings according to schemes A to E and sash dimensions
Windows – Scheme A B C D EMiddle lock vertical vertical verticalDimensions according to profile system horizontal horizontal horizontal
additional stay armDoors – Scheme B DMiddle lock vertical verticalDimensions according to profile system horizontal
Side hung sashes of windows and doorsComposition of fittings according to schemes A to D and sash dimensions
Windows – Scheme A B C DMiddle lock vertical verticalDimensions according to profile system horizontal horizontalMiddle hinge middle hinge middle hingeDoors – Scheme B DMiddle lock vertical verticalDimensions according to profile system horizontalMiddle hinge middle hinge middle hinge
Inactive side hung sashes of windows and doorsComposition of fittings according to schemes G to H and sash dimensions
Windows – Scheme G HMiddle lock horizontalDimensions according to profile systemDoors – Scheme G HMiddle lock horizontalDimensions according to profile systemMiddle hinge middle hinge middle hinge
for aluminium windows and doors
Tilt-turn and Side hung fittings
9
FERCO
Assembly dimensions for frame and sash
Drilling and millingdimensions formill-in gears6-25916-**-0-16-25917-**-0-16-25948-**-0-1
1520 > 2521
3 = Thickness of corner hinge JET AK 8
SW / SH
Product information
22
** Available backsets: 25 - 35 - 40 - 45 - 50 mm
Drilling and millingdimensions forlocking elementwith cylinder bore6-25918-**-0-1
Drilling and milling dimensions, assembly dimensions
Back-set+ 11
Drilling and millingdimensions formill-in gearBackset 14 mmwith wrong operationsafety device6-30534-00-0-1without wrong operationsafety device6-31280-00-0-1
G =
han
dle
posi
tion
10
FERCO
JET AK 8 – Shortening dimensions forpush rods, width of sash overlap 22 mm
Stay arm size 30: L = SW – 95Stay arm size 50: L = SW – 535Stay arm size 90: L = SW – 785
Push rod at top for tilt-turn sash
Side hung sash: L = SW/2 – 91Inactive sash: L = 55 and L = SW/2 – 212
Push rod for side hung and inactive sash, locking at top
Push rod for tilt-turn, side hung andinactive sash, locking at bottom
AbbreviationsG Gear position for standard sashGIA Gear position for inactive sashML Middle lockSH Sash heightSW Sash width
JET AK 8Sash typeTilt-turn sash: L = SH/2 – 183
Push rod for tilt-turn sash,locking on hinge side
Push rod for tilt-turn, side hung andinactive sash, at top of gear side
Product information
JET AK 8Sash typeTilt-turn sash: L = SH – G – 210Side hung sash without ML: L = SH – G – 210Side hung sash with ML: L = SH – G – 210Inactive sash without ML: L = SH – GIA – 132Inactive sash with ML: L = SH – GIA – 170
Push rod for tilt-turn, side hung andinactive sash, at bottom of gear side
JET AK 8Sash typeTilt-turn sash: L = SH – G – 210Side hung sash without ML: L = SH – G – 164Side hung sash with ML: L = SH – G – 210Inactive sash without ML: L = SH – GIA – 132Inactive sash with ML: L = SH – GIA – 170
JET AK 8Sash typeTilt-turn sash: L = SW/2 – 183Side hung sash: L = SW/2 – 183Inactive sash: L = SW/2 – 183
Tilt-locking plate for 6-30964-00-0-1tilt-turn and side hung sashes
Frame groove
14/18 mm
18 14
Tilt-locking plate, locking plates,supporting plate and lifting wedge
Supporting plate for 6-31066-00-0-1tilt-turn and side hung sashes
Lifting wedge for side hung 6-30998-00-0-1sashes without middle lock
Locking plate,fixed 6-30959-00-0-1adjustable G-11071-00-0-1
Locking platefor shoot 6-30961-00-0-1
Drilling dimension for push rod
6,0
10
Milling and drilling dimensions for geared handle
11
FERCO
Fitting requirementsaccording to size of sashes for schemes A to EQuantity Description Article No.A B C D E1 1 1 1 1 Basic bag JET AK 8, hinge side K-15800-00-0*
containing1 1 1 1 1 Stay arm bearing 6-30875-00-0-*1 1 1 1 1 Axle for stay arm bearing 6-30874-00-0-61 1 1 1 1 Stay arm hinge 6-31088-00-0-*1 1 1 1 1 Bearing sleeve 9-39805-00-0-62 2 2 2 2 Cover 9-39807-00-0-61 1 1 1 1 Corner bearing 14/18 9-39812-00-0-*1 1 1 1 1 Casing for corner bearing 14/18 6-30872-00-0-11 1 1 1 1 Axle for corner bearing 6-31087-00-0-61 1 1 1 1 Corner hinge 6-31073-00-0-*1 1 1 1 1 Clamping angle 6-30873-00-0-12 2 2 2 2 Countersunk screw 9-40529-14-0-81 1 1 1 1 Geared handle SPACIO with screws
Distance of fixing holes 98/104 mm G-46551-00-0-*1 1 1 1 1 Wrong operation safety device, 98 mm6-31065-10-0-1
alternatively: Wrong operation safety device, 104 mm 6-31065-30-0-11 1 1 1 1 Basic bag JET AK 8, gear side K-15801-00-0-1
containing1 1 1 1 1 Corner transmission 6-24529-00-0-11 1 1 1 1 Carrier 6-30984-00-0-11 1 1 1 1 Locking plate 6-30959-00-0-11 1 1 1 1 Shoot bolt, bottom 6-24531-00-0-11 1 1 1 1 Tilt-locking plate 6-30964-00-0-11 1 1 1 1 Supporting plate 6-31066-00-0-11 1 1 1 1 Alignment wedge for sash 9-40404-00-0-1- 1 1 2 2 Basic bag of middle lock K-15808-00-0-1
containing- 1 1 2 2 Corner transmission 6-30889-00-0-1- 1 1 2 2 Locking pin element 6-24539-00-0-1- 2 2 4 4 Locking plate 6-30959-00-0-1
alternatively: Basic bag of middle lock K-15809-00-0-1for deepened rod groovecontaining
- 1 1 2 2 Corner transmission 6-30889-01-0-1- 1 1 2 2 Locking pin element 6-24539-00-0-1- 2 2 4 4 Locking plate 6-30959-00-0-1
Box of stay arm JET AK 8SW Size
1 1 355- 600 30 K-15805-00-0-11 1 601-1000 50 K-15806-00-0-11 1 1 1 1001-1400 90 K-15807-00-0-1
1 1 1401-1700 50 K-15806-00-0-11 1 1401-1700 Additional stay arm K-12964-00-0-1
* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Basic bag = PU 10Single parts = PU 100
Locking plate6-30959-00-0-1
Stay armSize 30, 50, 90
Push rodSize 50, 90
Cornertransmission6-24529-00-0-1Locking plate6-30959-00-0-1
Carrier6-30984-00-0-1Locking plate6-30959-00-0-1
Shoot bolt, bottom6-24531-00-0-1Tilt-locking plate6-30964-00-0-1
Corner transmission6-30889-00-0-1(alternatively:6-30889-01-0-1)
Cover9-39807-00-0-6Stay arm hinge6-31088-00-0-*
Locking pin element6-24539-00-0-1
Locking plate6-30959-00-0-1
Locking pinelement6-24539-00-0-1Locking plate6-30959-00-0-1
Corner transmission6-30889-00-0-1(alternatively:6-30889-01-0-1)
Alignment wedgefor sash9-40404-00-0-1
Corner bearing 14/189-39812-00-0-*Casing for cornerbearing6-30872-00-0-1
Clamping angle6-30873-00-0-1Cover9-39807-00-0-6Corner hinge6-31073-00-0-*Countersunkscrew9-40529-14-0-8Axle for cornerbearing6-31087-00-0-6
for aluminium windows and doors, with geared handle
Tilt-turn fittings JET AK 8
Additionalstay armK-12964-00-0-1
Bearing sleeve9-39805-00-0-6Stay arm bearing6-30875-00-0-*Axle for stay armbearing6-30874-00-0-6
Supporting plate6-31066-00-0-1
Geared handleSPACIOG-46551-00-0-*Wrong operationsafety device6-31065-10-0-1
12
FERCO
Fitting requirementsaccording to size of sashes for schemes A to EQuantity Description Article No.A B C D E1 1 1 1 1 Basic bag JET AK 8, hinge side K-15800-00-0-*
containing1 1 1 1 1 Stay arm bearing 6-30875-00-0-*1 1 1 1 1 Axle for stay arm bearing 6-30874-00-0-61 1 1 1 1 Stay arm hinge 6-31088-00-0-*1 1 1 1 1 Bearing sleeve 9-39805-00-0-62 2 2 2 2 Cover 9-39807-00-0-61 1 1 1 1 Corner bearing 14/18 9-39812-00-0-*1 1 1 1 1 Casing for corner bearing 14/18 6-30872-00-0-11 1 1 1 1 Axle for corner bearing 6-31087-00-0-61 1 1 1 1 Corner hinge 6-31073-00-0-*1 1 1 1 1 Clamping angle 6-30873-00-0-12 2 2 2 2 Countersunk screw 9-40529-14-0-81 1 1 1 1 Basic bag JET AK 8, gear side K-15811-00-0-1
containing1 1 1 1 1 Corner transmission 6-24529-00-0-11 1 1 1 1 Mill-in gear 6-30534-00-0-11 1 1 1 1 Locking plate 6-30959-00-0-11 1 1 1 1 Shoot bolt, bottom 6-24531-00-0-11 1 1 1 1 Tilt-locking plate 6-30964-00-0-11 1 1 1 1 Supporting plate 6-31066-00-0-11 1 1 1 1 Alignment wedge for sash 9-40404-00-0-1- 1 1 2 2 Basic bag of middle lock K-15808-00-0-1
Containing- 1 1 2 2 Corner transmission 6-30889-00-0-1- 1 1 2 2 Locking pin element 6-24539-00-0-1- 2 2 4 4 Locking plate 6-30959-00-0-1
alternatively: Basic bag of middle lock K-15809-00-0-1for deepened rod groovecontaining
- 1 1 2 2 Corner transmission 6-30889-01-0-1- 1 1 2 2 Locking pin element 6-24539-00-0-1- 2 2 4 4 Locking plate 6-30959-00-0-1
Box of stay arm JET AK 8SW Size
1 1 355- 600 30 K-15805-00-0-11 1 601-1000 50 K-15806-00-0-11 1 1 1 1001-1400 90 K-15807-00-0-1
1 1 1401-1700 50 K-15806-00-0-11 1 1401-1700 Additional stay arm K-12964-00-0-1
* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Basic bag = PU 10Single parts = PU 100
Locking plate6-30959-00-0-1
Stay armSize 30, 50, 90
Push rodSize 50, 90
Cornertransmission6-24529-00-0-1Locking plate6-30959-00-0-1
Shoot bolt, bottom6-24531-00-0-1Tilt-locking plate6-30964-00-0-1
Corner transmission6-30889-00-0-1(alternatively:6-30889-01-0-1)
Cover9-39807-00-0-6Stay arm hinge6-31088-00-0-*
Locking pin element6-24539-00-0-1
Locking plate6-30959-00-0-1
Locking pinelement6-24539-00-0-1Locking plate6-30959-00-0-1
Corner transmission6-30889-00-0-1(alternatively:6-30889-01-0-1)
Alignment wedgefor sash9-40404-00-0-1
Corner bearing 14/189-39812-00-0-*Casing for cornerbearing6-30872-00-0-1
Clamping angle6-30873-00-0-1Cover9-39807-00-0-6Corner hinge6-31073-00-0-*Countersunkscrew9-40529-14-0-8Axle for cornerbearing6-31087-00-0-6
for aluminium windows and doors, with mill-in gear
Tilt-turn fittings JET AK 8
Additionalstay armK-12964-00-0-1
Bearing sleeve9-39805-00-0-6Stay arm bearing6-30875-00-0-*Axle for stay armbearing6-30874-00-0-6
Supportingplate6-31066-00-0-1
Mill-in gear6-30534-00-0-1
13
FERCO
Fitting requirementsaccording to size of sashes for schemes A and BQuantity Description Article No.A B
Basic bag JET AK 8, hinge side K-15800-00-0*containing
1 1 Stay arm bearing 6-30875-00-0-*1 1 Axle for stay arm bearing 6-30874-00-0-61 1 Stay arm hinge 6-31088-00-0-*1 1 Bearing sleeve 9-39805-00-0-62 2 Cover 9-39807-00-0-61 1 Corner bearing 14/18 9-39812-00-0-*1 1 Casing for corner bearing 14/18 6-30872-00-0-11 1 Axle for corner bearing 6-31087-00-0-61 1 Corner hinge 6-31073-00-0-*1 1 Clamping angle 6-30873-00-0-12 2 Countersunk screw 9-40529-14-0-81 1 Geared handle SPACIO with screws
Distance of fixing screws 98/104 mm G-46551-00-0-*Basic bag JET AK 8, gear side K-15802-00-0-1containing
2 2 Locking pin element 6-24539-00-0-12 2 Locking plate 6-30959-00-0-11 1 Carrier 6-30984-00-0-11 1 Alignment wedge for frame 6-30998-00-0-11 1 Alignment wedge for sash 9-40404-00-0-11 1 Side hung sash hinge, adjustable 6-31064-00-0-1
Additional single parts- 1 Middle bearing 14/18 G-13529-00-0-11 1 Locking plate 6-30959-00-0-1
* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Basic bag = PU 10Single parts = PU 100excepted:Side hung sash hinge = PU 10
Locking pinelement6-24539-00-0-1Locking plate6-30959-00-0-1
Carrier6-30984-00-0-1Locking plate6-30959-00-0-1
Cover9-39807-00-0-6Stay arm hinge6-31088-00-0-*
Alignment wedgefor sash9-40404-00-0-1
Corner bearing 14/189-39812-00-0-*Casing for cornerbearing6-30872-00-0-1
for single- and double-sash aluminium windows and doors, with geared handle, without middle lock
Side hung fittings JET AK 8
Bearing sleeve9-39805-00-0-6Stay arm bearing6-30875-00-0-*Axle for stay armbearing6-30874-00-0-6
Alignment wedgefor frame6-30998-00-0-1
Geared handleSPACIOG-46551-00-0-*
Side hung sash hinge,adjustable6-31064-00-0-1
Middle bearing 14/18G-13529-00-0-1
Locking pinelement6-24539-00-0-1Locking plate6-30959-00-0-1
Clamping angle6-30873-00-0-1Cover9-39807-00-0-6Corner hinge6-31073-00-0-*Countersunkscrew9-40529-14-0-8Axle for cornerbearing6-31087-00-0-6
14
FERCO
Fitting requirementsaccording to size of sashes for schemes A and BQuantity Description Article No.A B
Basic bag JET AK 8, hinge side K-15800-00-0*containing
1 1 Stay arm bearing 6-30875-00-0-*1 1 Axle for stay arm bearing 6-30874-00-0-61 1 Stay arm hinge 6-31088-00-0-*1 1 Bearing sleeve 9-39805-00-0-62 2 Cover 9-39807-00-0-61 1 Corner bearing 14/18 9-39812-00-0-*1 1 Casing for corner bearing 14/18 6-30872-00-0-11 1 Axle for corner bearing 6-31087-00-0-61 1 Corner hinge 6-31073-00-0-*1 1 Clamping angle 6-30873-00-0-12 2 Countersunk screw 9-40529-14-0-81 1 Basic bag JET AK 8, gear side K-15812-00-01
containing2 2 Locking pin element 6-24539-00-0-12 2 Locking plate 6-30959-00-0-11 1 Mill-in gear w/o wrong op. safety dev. 6-31280-00-0-11 1 Supporting plate 6-31066-00-0-11 1 Alignment wedge for sash 9-40404-00-0-11 1 Side hung sash hinge, adjustable 6-31064-00-0-1
Additional single part- 1 Middle bearing 14/18 G-13529-00-0-1
* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Basic bag = PU 10Single parts = PU 100excepted:Side hung sash hinge = PU 10
Cover9-39807-00-0-6Stay arm hinge6-31088-00-0-*
Corner bearing 14/189-39812-00-0-*Casing for cornerbearing6-30872-00-0-1
Clamping angle6-30873-00-0-1Cover9-39807-00-0-6Corner hinge6-31073-00-0-*Countersunkscrew9-40529-14-0-8Axle for cornerbearing6-31087-00-0-6
for single- and double-sash aluminium windows and doors, with mill-in gear, without middle lock
Side hung fittings JET AK 8
Bearing sleeve9-39805-00-0-6Stay arm bearing6-30875-00-0-*Axle for stay armbearing6-30874-00-0-6
Mill-in gearwithout wrongoperationsafety device6-31280-00-0-1
Alignment wedgefor sash9-40404-00-0-1
Supporting plate6-31066-00-0-1
Middle bearing 14/18G-13529-00-0-1
Side hung sash hinge,adjustable6-31064-00-0-1
Locking pinelement6-24539-00-0-1Locking plate6-30959-00-0-1
Locking pinelement6-24539-00-0-1Locking plate6-30959-00-0-1
15
FERCO
Fitting requirementsaccording to size of sashes for scheme GQuantity Description Article No.G
Basic bag JET AK 8, hinge side K-15800-00-0*containing
1 Stay arm bearing 6-30875-00-0-*1 Axle for stay arm bearing 6-30874-00-0-61 Stay arm hinge 6-31088-00-0-*1 Bearing sleeve 9-39805-00-0-62 Cover 9-39807-00-0-61 Corner bearing 14/18 9-39812-00-0-*1 Casing for corner bearing 14/18 6-30872-00-0-11 Axle for corner bearing 6-31087-00-0-61 Corner hinge 6-31073-00-0-*1 Clamping angle 6-30873-00-0-12 Countersunk screw 9-40529-14-0-81 Basic bag of rebate shoot bolt K-15803-00-0-1
containing1 Rebate shoot bolt 6-31015-00-0-12 Shoot bolt 6-31038-00-0-12 Locking plate 6-30961-00-0-11 Alignment wedge for sash 9-40404-00-0-11 Side hung sash hinge, adjustable 6-31064-00-0-1
Additional single parts1 Middle bearing 14/18 G-13529-00-0-11 Push rod for false mullion profile 9-40859-16-0-1
with double groove, length 1.6 m* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Basic bag = PU 10Single parts = PU 100excepted:Side hung sash hinge = PU 10
for double-sash aluminium windows and doors, false mullion profile with double groove
Inactive sash fittings JET AK 8
Shoot bolt6-31038-00-0-1
Cover9-39807-00-0-6Stay arm hinge6-31088-00-0-*
Bearing sleeve9-39805-00-0-6Stay arm bearing6-30875-00-0-*Axle for stay armbearing6-30874-00-0-6
Side hung sash hinge,adjustable6-31064-00-0-1
Rebateshoot bolt6-31015-00-0-1
Shoot bolt6-31038-00-0-1
Locking plate6-30961-00-0-1
Locking plate6-30961-00-0-1
Alignment wedgefor sash9-40404-00-0-1
Middle bearing 14/18G-13529-00-0-1
Pu
sh r
od
fo
rfa
lse
mu
llio
np
rofi
le w
ith
do
ub
le g
roo
ve9-
4085
9-16
-0-1
Corner bearing 14/189-39812-00-0-*Casing for cornerbearing6-30872-00-0-1
Clamping angle6-30873-00-0-1Cover9-39807-00-0-6Corner hinge6-31073-00-0-*Countersunkscrew9-40529-14-0-8Axle for cornerbearing6-31087-00-0-6
16
FERCO
Fitting requirementsaccording to size of sashes for scheme GQuantity Description Article No.G
Basic bag JET AK 8, hinge side K-15800-00-0*containing
1 Stay arm bearing 6-30875-00-0-*1 Axle for stay arm bearing 6-30874-00-0-61 Stay arm hinge 6-31088-00-0-*1 Bearing sleeve 9-39805-00-0-62 Cover 9-39807-00-0-61 Corner bearing 14/18 9-39812-00-0-*1 Casing for corner bearing 14/18 6-30872-00-0-11 Axle for corner bearing 6-31087-00-0-61 Corner hinge 6-31073-00-0-*1 Clamping angle 6-30873-00-0-12 Countersunk screw 9-40529-14-0-81 Bag of shoot bolt K-15804-30-0-1
containing2 Shoot bolt E-12832-00-0-12 Carrier screw 30 mm 9-40884-00-0-82 Keeper G-12096-00-0-11 Alignment wedge for sash 9-40404-00-0-12 Locking plate 6-30961-00-0-11 Side hung sash hinge, adjustable 6-31064-00-0-1
Additional single part1 Middle bearing G-13529-00-0-1
* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Basic bag = PU 10Single parts = PU 100excepted:Side hung sash hinge = PU 10
for double-sash aluminium windows, without middle lock
Inactive sash fittings JET AK 8
Locking plate6-30961-00-0-1
Middle bearing 14/18G-13529-00-0-1
Alignment wedgefor sash9-40404-00-0-1
Locking plate6-30961-00-0-1
KeeperG-12096-00-0-1
Shoot boltE-12832-00-0-1
Shoot boltE-12832-00-0-1
KeeperG-12096-00-0-1
Corner bearing 14/189-39812-00-0-*Casing for cornerbearing6-30872-00-0-1
Clamping angle6-30873-00-0-1Cover9-39807-00-0-6Corner hinge6-31073-00-0-*Countersunkscrew9-40529-14-0-8Axle for cornerbearing6-31087-00-0-6
Cover9-39807-00-0-6Stay arm hinge6-31088-00-0-*
Bearing sleeve9-39805-00-0-6Stay arm bearing6-30875-00-0-*Axle for stay armbearing6-30874-00-0-6
Side hung sash hinge,adjustable6-31064-00-0-1
17
FERCO
Fitting requirementsaccording to size of sashes for scheme GQuantity Description Article No.G
Basic bag JET AK 8, hinge side K-15800-00-0*containing
1 Stay arm bearing 6-30875-00-0-*1 Axle for stay arm bearing 6-30874-00-0-61 Stay arm hinge 6-31088-00-0-*1 Bearing sleeve 9-39805-00-0-62 Cover 9-39807-00-0-61 Corner bearing 14/18 9-39812-00-0-*1 Casing for corner bearing 14/18 6-30872-00-0-11 Axle for corner bearing 6-31087-00-0-61 Corner hinge 6-31073-00-0-*1 Clamping angle 6-30873-00-0-12 Countersunk screw 9-40529-14-0-81 Bag of inactive sash gear G K-15810-00-0-1
containing1 Inactive sash gear 6-24680-00-0-11 Key 6-23903-38-0-11 Shoot bolt, top G-17509-00-0-11 Shoot bolt, bottom E-12832-00-0-11 Keeper G-12096-00-0-11 Alignment wedge for sash 9-40404-00-0-12 Locking plate 6-30961-00-0-11 Side hung sash hinge, adjustable 6-31064-00-0-1
Additional single part1 Middle bearing 14/18 G-13529-00-0-1
* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Basic bag = PU 10Single parts = PU 100excepted:Side hung sash hinge = PU 10
for double-sash aluminium windows and doors, without middle lock
Inactive sash fittings JET AK 8
Shoot boltG-17509-00-0-1
KeeperG-12096-00-0-1Shoot boltE-12832-00-0-1
Locking plate6-30961-00-0-1
Locking plate6-30961-00-0-1
Middle bearing 14/18G-13529-00-0-1
Inactivesash gear6-24680-00-0-1
Alignment wedgefor sash9-40404-00-0-1
Key6-23903-38-0-0
Cover9-39807-00-0-6Stay arm hinge6-31088-00-0-*
Bearing sleeve9-39805-00-0-6Stay arm bearing6-30875-00-0-*Axle for stay armbearing6-30874-00-0-6
Side hung sash hinge,adjustable6-31064-00-0-1
Corner bearing 14/189-39812-00-0-*Casing for cornerbearing6-30872-00-0-1
Clamping angle6-30873-00-0-1Cover9-39807-00-0-6Corner hinge6-31073-00-0-*Countersunkscrew9-40529-14-0-8Axle for cornerbearing6-31087-00-0-6
18
FERCO
Bag of fan-light catchG-12080-11-0-*Operation rod 980 mmG-12083-10-0-1
Tilt sash fittings JET AK 8
Locking plate6-30959-00-0-1
Locking pin element6-24539-00-0-1
Locking pin element6-24539-00-0-1
Variant for narrow tilt sashes
Locking plate6-30959-00-0-1
Carrier6-30984-00-0-1
Geared handle SPACIOG-46551-00-0-*
Limiting stay with friction sliderArm length 150 mmG-12952-14-0-1Arm length 250 mmG-12953-14-0-1
Axial hinge, 105 mm, two-partG-46730-00-0-*
Axial hinge, 105 mm, two-partG-46730-00-0-*
Locking plate6-30959-00-0-1
Fitting requirementsQuantity Description Article No.2 Bag of limiting stay with friction slider
Arm length 150 mm G-12952-14-0-1 Variant: Arm length 250 mm G-12953-14-0-12 Axial hinge, 105 mm, two-part G-46730-00-0-*2 Locking pin element 6-24539-00-0-11 Geared handle SPACIO G-46551-00-0-*1 Carrier 6-30984-00-0-13 Locking plate 6-30959-00-0-1
Variant:1 Mill-in gear 6-31280-00-0-12 Locking plate 6-30959-00-0-1
* 0 = Surface uncoated* 1 = Surface EV 1* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)Bag = PU 10Single parts = PU 100
Limiting stay with friction sliderArm length 150 mmG-12952-14-0-1Arm length 250 mmG-12953-14-0-1
Variant:Mill-in gear6-31280-00-0-1
19
FERCO
Description PU Article No.Axial hinge, 105 mm – three-partThickness of hinge blades 2.7 mm 10 G-46731-00-0-*Axial hinge, 105 mm – two-partThickness of hinge blades 2.7 mm 10 G-46730-00-0-** 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)
Axial hinge, 105 mmthree-part
Axial hinge, 105 mmtwo-part
Axial hinges
Frame groove14/18 mm
18 14
for aluminium windows and doors
20
FERCO
ApplicationThe multi point locking system is specially designed for large areaaluminium windows and responds particularly to three main requirements:– The system resists against extreme wind pressure on façades of high-
rise buildings (tested up to 7700 Pa)– It offers optimized tightness against air and water penetration because
of two to ten locking points– The operation by means of an æsthetic geared handle, available in a
wide range of colours, is very easy.
Main characteristics
for large area outward opening aluminium windows installed in glazed façades
Multi point locking system
Only one geared handle controls up to 10 locking points
Single or double locking direction
Single locking direction Double locking direction
Adjustable roller pins
The geared handle with one carrier fork offers two possibilities(shown in reversed assembly position):
Travel 18 mm Travel 36 mm
Locking plateE-17719-02-0-1
Locking plateE-18959-02-0-1
Assembly dimensions for push rods and profile
at
at
21
FERCO
Geared handle in normal position, locking pins adjustable
7 point locking system for outward opening windows
Location ofopeningstay arm
Location ofopeningstay arm
Locking pinelement6-24539-**-0-1Locking plateE-17719-02-0-1
Locking pinelement6-24539-**-0-1Locking plateE-17719-02-0-1
Rod guideE-19470-00-0-6
Rod guideE-19470-00-0-6
CarrierG-17563-**-0-1Locking plateE-17719-02-0-1
Cornertransmission6-24529-**-0-1Locking plateE-17719-02-0-1
Closing directionClosing direction
Cornertransmission6-24529-**-0-1Locking plateE-17719-02-0-1
Locking pinelement6-24539-**-0-1Locking plateE-17719-02-0-1
Locking pinelement6-24539-**-0-1Locking plateE-17719-02-0-1
Geared handleSPACIOG-46551-00-0-*
Fitting requirementsQuantity Description Article No.
Single parts2 Corner transmission, pin length 6.5 mm 6-24529-00-0-1
Variant: Corner transmission, pin length 8.0 mm 6-24529-08-0-14 Locking pin element, pin length 6.5 mm 6-24539-00-0-1
Variant: Locking pin element, pin length 8.5 mm 6-24539-08-0-11 Carrier, pin length 6.5 mm G-17563-00-0-1
Variant: Carrier, pin length 8.0 mm G-17563-08-0-12 Rod guide E-19470-00-0-67 Locking plate E-17719-02-0-11 Geared handle SPACIO G-46551-00-0-*
Optional partCarrier without locking pin G-17510-00-0-1
* 1 = Surface EV 1* 5 = Surface UC 5* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)
min. 24
22
FERCO
Geared handle in reversed position, locking pins adjustable
4 point locking system for outward opening windows
Location ofopeningstay arm
Location ofopeningstay arm
Locking pinelement6-24539-**-0-1Locking plateE-17719-02-0-1
Rod guideE-19470-00-0-6
Rod guideE-19470-00-0-6
Cornertransmission6-24529-**-0-1Locking plateE-17719-02-0-1
Closing direction Closing direction
Geared handleSPACIOG-46552-00-R-*
Fitting requirementsQuantity Description Article No.
Single parts2 Corner transmission, pin length 6.5 mm 6-24529-00-0-1
Variant: Corner transmission, pin length 8.0 mm 6-24529-08-0-12 Locking pin element, pin length 6.5 mm 6-24539-00-0-1
Variant: Locking pin element, pin length 8.5 mm 6-24539-08-0-12 Rod guide E-19470-00-0-64 Locking plate for handle rotation of 90° E-17719-02-0-11 Geared handle SPACIO G-46552-00-R-*
Travel 18 mm* 1 = Surface EV 1* 5 = Surface UC 5* 6 = Surface black (RAL 9005)* 7 = Surface white (RAL 9016)* 7T = Surface white (RAL 9010)
min. 12
Locking pinelement6-24539-**-0-1Locking plateE-17719-02-0-1
Cornertransmission6-24529-**-0-1Locking plateE-17719-02-0-1
23
FERCO
for geared handle and push rods – single locking direction
Drilling and milling dimensions
Normal position Reversed position
hal
f w
idth
of
elem
ent
hal
f w
idth
of
elem
ent
hal
f w
idth
of
elem
ent
hal
f w
idth
of
elem
ent
24
FERCO
for geared handle and push rods – double locking direction
Drilling and milling dimensions
Normal position Reversed position
hal
f w
idth
of
elem
ent
hal
f w
idth
of
elem
ent
hal
f w
idth
of
elem
ent
hal
f w
idth
of
elem
ent
25
FERCO
ApplicationRange of applications for Safety Door Locks G.U-SECURY:– Aluminium house entrance doors
DesignsSafety Door Locks G.U-SECURYAll Safety Door Locks G.U-SECURY have identical construction andfunction features:– The latch is operated by either turning the key or the handle.– Reversible latch – the door locks can be used for left hand and right
hand hinged doors.– Completely sealed lock case – no foreign matter can obstruct the
easy operation.– All through holes in the lock case are equipped with sleeves – swarf
cannot damage the gear.– The height of the lock case with 92 mm centres complies with
German DIN measurements – the risk to drill a hole in the lock caseis eliminated.
– Locking by BKS security profile cylinders.
Safety Door Locks G.U-SECURY Automatic– Simply close the door, 2 latches automatically become rigid dead-
bolts which are absolutely fixed. Throw of the latch-deadbolts 20 mm.– Together with the deadbolt of the lock case a three point locking of
the door is obtained.– Operation from inside: the latch-deadbolts and the latch itself are
simply withdrawn by the door handle; the deadbolt by the cylinderkey (one turn).
– Operation from outside: one turn of the cylinder key withdraws thelatch-deadbolts, the latch and the deadbolt.
Safety Door Locks G.U-SECURY Automatic with A-Opener (electricdoor release) and G.U-SECURY COMFORT– The security of the automatic locking is combined with the comfort of
the automatic opening.– Automatic unlocking:
from outside, without contact, with G.U-SECURY COMFORT andelectronic key; from inside by pressing the intercom button.
– After closing, the door is again automatically and mecanically multipoint locked.
– Complete delivery with connection cable.
Safety Door Locks G.U-SECURY Automatic with Safe-T-Catch– The Safe-T-Catch protects the opened door from any unauthorized
intrusion, permitting at the same time a dialogue with the outsidewithout taking risks.
– No face fixed locks, additional cylinders nor chains are necessary.– From inside the Safe-T-Catch is engaged and released by the turn
knob.– From outside the Safe-T-Catch is released by the cylinder key.
Safety Door Locks G.U-SECURY Automatic with anti-panic function– Security for emergency exits: no access from outside for unauthorized
persons, but always a guaranteed exit in case of alarm.– On outside the door is equipped with fixed button and profile cylinder,
on inside with handle.– Locking with 2 automatic latches in anti-panic function.– Particularly suitable for secondary doors.
Important: On the outside of all doors equipped with G.U-SECURYAutomatic a fixed pull must be used instead of the door handle!
Safety Door Locks G.U-SECURY SB 2 with round bolts– 2 round bolts offer additional security.– The round bolts are moved by turning the cylinder key.
Safety Door Locks G.U-SECURY SB 2 with Safe-T-Catchand round bolts– 2 round bolts offer additional security.– The Safe-T-Catch protects the opened door from any unauthorized
intrusion, permitting at the same time a dialogue with the outsidewithout taking risks.
– No face fixed locks, additional cylinders nor chains are necessary.– From inside the Safe-T-Catch is engaged and released by the turn
knob.– From outside the Safe-T-Catch is released by the cylinder key.
Safety Door Locks G.U-SECURY SH 2 with locking claws– 2 locking claws offer additional security.– The locking claws are moved by turning the cylinder key.
Safety Door Locks G.U-SECURY SH 2 with Safe-T-Catchand locking claws– 2 locking claws offer additional security.– The Safe-T-Catch protects the opened door from any unauthorized
intrusion, permitting at the same time a dialogue with the outsidewithout taking risks.
– No face fixed locks, additional cylinders nor chains are necessary.– From inside the Safe-T-Catch is engaged and released by the turn
knob.– From outside the Safe-T-Catch is released by the cylinder key.
Additional security fittingsThe use of the following security fittings together with Safety Door LocksG.U-SECURY is recommended:– Security door hinges– Additional locking devices on hinge side– Security door handle sets– Security profile cylinders
(on inside preferably with knob)
Standard coloursThe forends of the locks and accessories are made of stainless steel.Other colours and surface treatments upon request.
AbbreviationsHH Handle heightPU Packing unitSB Round boltsSF Automatic latch-deadboltsSH Locking clawsSRH Sash rebate height
Article NumbersExampleArticle No.6-28484-31-0-8
6-28484- - - Part number- -31- - Size- - -L- DIN left hand (hinge side)- - -R- DIN right hand (hinge side)- - -0- Usable on both sides- - - -1T Nickel-silver- - - -1 F 1/EV 1, silver colour,
ferGUard* silver (steel parts)- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass colour,
ferGUard* yellow (steel parts)- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black- - - -7 White lacquer finish (RAL 9016)- - - -8 Stainless steel or inox colour- - - -* Surface treatment variable (see price-list)
for aluminium doors
Safety Door Locks G.U-SECURY
26
FERCO
Additional locking device on hinge side
Additional locking device on hinge sideWedged keep, height 5 mm 6-29525-00-0-1Wedged keep, height 8 mm 6-29526-00-0-1Drill-in pin 6-28985-**-0-1
Forend extension Accessories
Extension, L = 400Forend U 24 x 69-29265-00-0-1
Interchangeablelatch piecefor latch platesof aluminium doors6-28902-03-0-*
Cover for latch9-33906-00-0-6
Cover for deadbolt9-33905-00-0-6
Cover platefor latch exit9-36679-00-0-1
Roller latch6-27542-**-0-1
Turn knob
Turn knobfor Safety Door Locks G.U-SECURYwith Safe-T-CatchEV 1 colour 6-29244-00-0-1white 6-29244-00-0-7stainless steel 6-29245-00-0-8
Optional parts, accessories
Safety Door Locks G.U-SECURY for aluminium doors
Interchangeablelatch piecefor roller latchDim. y = 9 to 13 mmK-15597-01-0-6
Protection coverfor automaticlatch-deadbolts9-40010-00
27
FERCO
The door leaf should not be drilled in thearea of the lock with the lock installed.
The spindle should not be knockedthrough the follower using a hammer.
The door leaf should notbe carried using the handles.
The distance between forend and latchplate should be between 2 and 5 mm.
The latch and the deadboltshould not be painted over.
The handle should not be operated in thewrong direction. In use a maximum load of150 N on the handle should not be exceeded.
The handle and the key shouldnot be operated simultaneously.
The deadbolt should not beextended while the door is open.
The lock should only be operated withthe key and not with any foreign objects.
Anti-panic locks should notbe left with a key in them.
Anti-panic locks should not be fitted withlocking cylinders with thumb turn or turn knob.
Panic doors should only be used incase of emergency (no frequent use).
Locks are to be lubricated at leastonce a year (non-resinogenic oil).
As soon as there are visible signs of physicalattack (e.g. bent bolts), the lock must be replaced.
Double leaf doors should not beforced open using the inactive leaf.
1. 2. 3.
4. 5. 6.
7. 8. 9.
10. 11. 12.
13. 14. 15.
Product information
General use, installation and maintenance advice for locks and furniture
2 to 5 mm
28
FERCO
Safety Door Locks G.U-SECURY Automaticwith latch, deadbolt and 2 automatic latch-deadboltsDescription PU Article No.Safety Door Lock G.U-SECURY 45/92 Automatic [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29044-31-0-8
Safety Door Lock G.U-SECURY 40/92 Automatic [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29041-31-0-8
Safety Door Lock G.U-SECURY 35/92 Automatic [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29040-31-0-81735-2285 2285 24 8 2 6-29039-31-0-8[1] = Surface 8 = stainless steel
Important: On the outside of all doors equipped with G.U-SECURY Automatica fixed pull must be used instead of the door handle!
Safety Door Locks G.U-SECURY Automatic
Safety Door LockG.U-SECURY Automatic
730
mm
Han
dle
hei
gh
t 10
50 m
m
760
mm
Len
gth
228
5 m
m
for aluminium doors – Backset 92 mm, spindle 8 mm, handle height 1050 mm
29
FERCO
Safety Door Locks G.U-SECURY Automaticwith latch, deadbolt, 2 automatic latch-deadbolts andA-opener (electric door release)Description PU Article No.Safety Door Lock G.U-SECURY 45/92 Automaticwith A-Opener (electric door release) [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29733-17-0-8
Safety Door Lock G.U-SECURY 40/92 Automaticwith A-Opener (electric door release) [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29732-17-0-8
Safety Door Lock G.U-SECURY 35/92 Automaticwith A-Opener (electric door release) [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29731-17-0-81735-2285 2285 24 8 2 6-29720-14-0-8[1] = Surface 8 = stainless steel
Important: On the outside of all doors equipped with G.U-SECURY Automatica fixed pull must be used instead of the door handle!
Safety Door Locks G.U-SECURY Automatic with A-Opener
730
mm
Han
dle
hei
gh
t 10
20 m
m
760
mm
Len
gth
228
5 m
m
Safety Door LockG.U-SECURY Automaticwith A-Opener(electric door release)
(electric door release) for aluminium doors – Backset 92 mm, spindle 8 mm, handle height 1020 mm
30
FERCOG.U-SECURY COMFORT
G.U-SECURY COMFORTfor G.U-SECURY Automatic with A-Opener (electric door release)Description PU Article No.G.U-SECURY COMFORT 1 K-15348-00-0-0for automatic door release with electronic key –without contact, from the outsideSingle parts5 electronic keys COMFORT
with built in programmable chip1 master key4 user keys
1 monitor loop with decorative cover,diameter approx 80 mm
1 controller, pre-programmed1 cable, length 2.5 mElectronic key COMFORT 1 9-39212-00-0-0for G.U-SECURY COMFORT
Electronic key COMFORT
Monitor loop with decorative cover
Pre-programmed controller
Dim. A
Door leaf Frame (jamb)
Concealed cable duct
G.U-SECURY COMFORT for G.U-SECURY Automatic with A-Opener (electric door release)
Concealed cable ductsfor G.U-SECURY Automatic with A-Opener (electric door release)Description PU Article No.Concealed cable duct 260 1 6-29854-00-0-0Casing: width x height x depth = 23 x 260 x 17 mmfor steel doors – mill-in versionDim. A up to 70 mmConcealed cable duct 480 1 6-29942-00-0-0Casing: width x height x depth = 23 x 480 x 17 mmfor steel doors – mill-in versionDim. A over 70 mmConcealed cable duct 362 1 6-30809-00-0-0Casing: width x height x depth = 20 x 382 x 15 mmfor steel doors – mill-in versionDim. A over 70 mmConcealed cable duct for hollow section doors 1 9-39237-00-0-0Spiral without receiver box, flexible length 370 mmDim. A over 70 mm
31
FERCOG.U-SECURY Automatic with anti-panic function
730
mm
Han
dle
hei
gh
t 10
20 m
m76
0 m
m
Len
gth
228
5 m
m
Safety Door LockG.U-SECURY Automaticwith anti-panic function
for aluminium doors – Backset 92 mm, spindle 9 mm, handle height 1020 mm
Safety Door Locks G.U-SECURY Automaticwith latch, 2 automatic latch-deadbolts and anti-panic functionDescription PU Article No.Safety Door Lock G.U-SECURY 45/92 Automaticwith anti-panic function [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 9 2 6-29794-07-0-8
Safety Door Lock G.U-SECURY 40/92 Automaticwith anti-panic function [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 9 2 6-29793-07-0-8
Safety Door Lock G.U-SECURY 35/92 Automaticwith anti-panic function [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 9 2 6-29792-07-0-8[1] = Surface 8 = stainless steel
Important: On the outside of all doors equipped with G.U-SECURY Automatica fixed pull must be used instead of the door handle!
32
FERCO
Safety Door Locks G.U-SECURY Automaticwith latch, deadbolt, 2 automatic latch-deadbolts and Safe-T-CatchDescription PU Article No. Throw of
Safe-T-CatchSafety Door Lock G.U-SECURY 45/92 Automaticwith Safe-T-Catch [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29746-17-0-8 11 mm
Safety Door Lock G.U-SECURY 40/92 Automaticwith Safe-T-Catch [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-29745-17-0-8 11 mm
Safety Door Lock G.U-SECURY 35/92 Automaticwith Safe-T-Catch [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-30808-17-0-6 11 mm[1] = Surface 8 = stainless steel
Important: On the outside of all doors equipped with G.U-SECURY Automatica fixed pull must be used instead of the door handle!
G.U-SECURY Automatic with Safe-T-Catch
730
mm
Han
dle
hei
gh
t 10
20 m
m
760
mm
Len
gth
228
5 m
m
Safety Door LockG.U-SECURY Automaticwith Safe-T-Catch
450
mm
for aluminium doors – Backset 92 mm, spindle 8 mm, handle height 1020 mm
33
FERCO
Safety Door Locks G.U-SECURY SB 2with latch, deadbolt and 2 round boltsDescription PU Article No.Safety Door Lock G.U-SECURY 45/92 SB 2 [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-26603-03-0-8
Safety Door Lock G.U-SECURY 40/92 SB 2 [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-26597-03-0-8
Safety Door Lock G.U-SECURY 35/92 SB 2 [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-26591-03-0-8[1] = Surface 8 = stainless steel
Safety Door Locks G.U-SECURY SB 2 with Safe-T-Catchwith latch, deadbolt, 2 round bolts and Safe-T-CatchDescription PU Article No. Throw of
Safe-T-CatchSafety Door Lock G.U-SECURY 45/92 SB 2with Safe-T-Catch [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-28770-03-0-8 11 mm
Safety Door Lock G.U-SECURY 40/92 SB 2with Safe-T-Catch [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-28768-03-0-8 11 mm
Safety Door Lock G.U-SECURY 35/92 SB 2with Safe-T-Catch [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-28766-03-0-8 11 mm[1] = Surface 8 = stainless steel
Safety Door Lock G.U-SECURYSB 2 SB 2 with Safe-T-Catch
730
mm
Han
dle
hei
gh
t 10
50 m
m
760
mm
Len
gth
228
5 m
m
450
mm
G.U-SECURY SB 2 and SB 2 with Safe-T-Catch
for aluminium doors – Backset 92 mm, spindle 8 mm, handle height 1050 mm
34
FERCO
Safety Door Locks G.U-SECURY SH 2with latch, deadbolt and 2 locking clawsDescription PU Article No.Safety Door Lock G.U-SECURY 45/92 SH 2 [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-27597-03-0-8
Safety Door Lock G.U-SECURY 40/92 SH 2 [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-27596-03-0-8
Safety Door Lock G.U-SECURY 35/92 SH 2 [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-27595-03-0-8[1] = Surface 8 = stainless steel
Safety Door Locks G.U-SECURY SH 2 with Safe-T-Catchwith latch, deadbolt, 2 locking claws and Safe-T-CatchDescription PU Article No. Sperrbügel-
ausschlußSafety Door Lock G.U-SECURY 45/92 SH 2with Safe-T-Catch [1]Backset 45 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-28804-03-0-8 11 mm
Safety Door Lock G.U-SECURY 40/92 SH 2with Safe-T-Catch [1]Backset 40 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-28802-03-0-8 11 mm
Safety Door Lock G.U-SECURY 35/92 SH 2with Safe-T-Catch [1]Backset 35 mm, centres 92 mmSRH Length Forend Spindle1735-2285 2285 U 24 x 6 8 2 6-28800-03-0-8 11 mm[1] = Surface 8 = stainless steel
G.U-SECURY SH 2 and SH 2 with Safe-T-Catch
730
mm
Han
dle
hei
gh
t 10
50 m
m
760
mm
Len
gth
228
5 m
m
450
mm
Safety Door Lock G.U-SECURYSH 2 SH 2 with Safe-T-Catch
for aluminium doors – Backset 92 mm, spindle 8 mm, handle height 1050 mm
35
FERCO
Application Description PU Article No.Aluminium doors Additional locking device on hinge side [1]
for increased break-in protectionWedged keep, height 5 mm 6 6-29525-00-0-1Wedged keep, height 8 mm 6 6-29526-00-0-1Drill-in pin 6 6-28985-**-0-1
Aluminium doors Forend extension [1]SRH Length Width2285-2685 400 24 U 10 9-29265-00-0-12285-2685 400 22 U 102285-2685 400 24 flat 10
Safety Door Locks G.U-SECURY Cover plateAluminium doors for latch exit, grey plastic 10 9-36679-00-0-1Safety Door Locks G.U-SECURY Roller latch, for subsequent exchange
Backset 35 mm 1 6-27542-35-0-1Backset 40 mm 1 6-27542-40-0-1Backset 45 mm 1 6-27542-45-0-1Interchangeable latch piece for latch plates 10 6-28902-03-0-1Countersunk screw M 4 x 6 for latch piece 20 9-13242-06
Safety Door Locks G.U-SECURY Turn knobwith Safe-T-Catch for Safety Door Locks G.U-SECURY
with Safe-T-CatchEV 1 colour 10 6-29244-00-0-1white 10 6-29244-00-0-7stainless steel 10 6-29245-00-0-8Cover for deadbolt, black plastic 100 9-33905-00-0-6Cover for latch, black plastic 100 9-33906-00-0-6
[1] = Surface: 1 = ferGUard* silver, 7 = white, 8 = stainless steel
Optional parts, accessories
Safety Door Locks G.U-SECURY for aluminium doors
36
FERCOLatch plates and catch plates
Safety Door Locks G.U-SECURY for aluminium doors
Latch plates, adjustable, U forend 24 x 6 (rebate clearance 17 - 19)Application Description Article No.
DIN left hand DIN right handWithout interchangeable latch piece Latch plate, U-shaped
for electric door opener – pressure adjustableLength mm Width mm Depth mm227 24 6 6-29512-00-L-8 6-29512-00-R-8
With assembled interchangeable Latch plate, U-shapedlatch piece for electric door opener – pressure adjustable
Length mm Width mm Depth mm227 24 6 6-29513-00-L-8 6-29513-00-R-8
Safety Door Locks with Safe-T-Catch Catch plate, U-shapedLength mm Width mm Depth mm227 24 6 6-29511-00-L-8 6-29511-00-R-8
Latch plates, adjustable, flat forend 24 x 3 (rebate clearance 14 - 16)Without interchangeable latch piece Latch plate
for electric door opener – pressure adjustableLength mm Width mm Depth mm227 24 3 9-38615-00-L-8 9-38615-00-R-8
With assembled interchangeable Latch platelatch piece for electric door opener – pressure adjustable
Length mm Width mm Depth mm227 24 3 6-29506-00-L-8 6-29506-00-R-8Euro-groove 15/20 on sash, groove 14/18 on frame 6-29506-01-L-8 6-29506-01-R-8
Safety Door Locks with Safe-T-Catch Catch plateLength mm Width mm Depth mm227 24 3 6-29505-00-L-8 6-29505-00-R-8
Latch plate, fixed, flat forend 24 x 3 (rebate clearance 12 - 14)Latch plateLength mm Width mm Depth mm227 24 3 9-38683-00-0-8
6-29512-00-*-8 6-29513-00-*-8 6-29505-00-*-86-29511-00-*-8
6-29506-00-*-86-29506-01-*-8
9-38683-00-0-8
37
FERCOLocking plates
Safety Door Locks G.U-SECURY for aluminium doors
Locking plates, adjustable, U forend 24 x 6 (rebate clearance 17 - 19)Application Description Article No.
Locking plate for SB 2with 2 end pieces – pressure adjustableLength mm Width mm Depth mm115 24 6 6-29514-00-0-8Locking plate for SH 2with 2 end pieces – pressure adjustableLength mm Width mm Depth mm115 24 6 6-29515-00-0-8Locking plate for automatic latch-deadboltswith 2 end pieces – pressure adjustableLength mm Width mm Depth mm115 24 6 6-29517-00-0-8
Locking plates, adjustable, flat forend 24 x 3 (rebate clearance 14 - 16)Locking plate for SB 2pressure adjustableLength mm Width mm Depth mm115 24 3 6-29507-00-0-8Locking plate for SH 2pressure adjustableLength mm Width mm Depth mm115 24 3 6-29508-00-0-8Locking plate for automatic latch-deadboltspressure adjustableLength mm Width mm Depth mm115 24 3 6-29510-00-0-8Euro-groove 15/20 on sash, groove 14/18 on frame 6-29510-01-0-8
Locking plates, fixed, flat forend 24 x 3 (rebate clearance 12 - 14)Locking plate for SB 2Length mm Width mm Depth mm115 24 3 9-38684-00-0-8Locking plate for SH 2Length mm Width mm Depth mm115 24 3 9-38685-00-0-8Locking plate for automatic latch-deadboltsLength mm Width mm Depth mm115 24 3 9-39040-00-0-8
6-29507-00-0-86-29514-00-0-8
6-29508-00-0-86-29515-00-0-8
6-29510-00-0-86-29510-01-0-86-29517-00-0-8
9-38684-00-0-8 9-38685-00-0-8 9-39040-00-0-8
38
FERCOMonobloc furniture with DIRIGENT handles
92
108,5
220
70
28
21,5
92
108,5
220
70
28
21,5
220
28
92
92
108,5
220
70
28
21,5
92220
220
28
92
220
28
92
92220
28
28
Narrow stile door furniture DIRIGENT-T/S
brown
whiteMonobloc single platewith external rollershutter handle (half set)
Plate heightPlate widthCentresRoller shutterHandle heightSpindle
220 mm28 mm92 mm
23 mm8 mm
4 pcs
4 pcs 6-29919-00-0-5
6-29919-00-0-7
white
brown
Monobloc single platewith external fixed pull(half set)
Plate heightPlate widthCentresSpindle
220 mm28 mm92 mm
8 mm
4 pcs
4 pcs
Monobloc single platewith external lever(half set) brown
Plate heightPlate widthCentresSpindle
220 mm28 mm92 mm
8 mm
10 pcs white
10 pcs
6-30400-00-0-7
6-30400-00-0-5
brown
whiteMonobloc single platewith internal lever(half set)
Plate heightPlate widthCentresSpindle
220 mm28 mm92 mm
8 mm
4 pcs
4 pcs
6-30399-00-0-7
6-30399-00-0-5
Monoblocfurniture set1 x lever inside1 x fixed pull outside
Plate heightPlate widthCentresSpindle
220 mm28 mm92 mm
8 mm
2 sets
2 sets
brown
white K-15544-02-L/R-7
K-15544-02-L/R-5
2 sets
K-15543-02-0-7
K-15543-02-0-5
2 sets
brown
whiteMonoblocdoor furniture2 x levers
Plate heightPlate widthPlate thicknessCentresSpindle
220 mm28 mm
9 mm92 mm
8 mm
Model
PU Colour Article No.
6-29576-00-0-7
6-29576-00-0-5
39
FERCOMonobloc furniture with DIRIGENT handles
91,5
220
108,5
28
28
220
Monobloc accessoriessuitable for door thicknessfrom 60 to 85 mm
Monobloc single plateexternal backplatewithout handle borewithout cylinder bore
Monobloc single plateinternal backplatewithout handle borewith cylinder bore
Plate heightPlate width
220 mm28 mm
Monobloc single plateexternal backplatewithout handle borewith cylinder borePlate heightPlate width
220 mm28 mm
Monobloc single plateinternal backplatewithout handle borewithout cylinder borePlate heightPlate width
220 mm28 mm
Plate heightPlate width
220 mm28 mm
Spindle 8 mmLength130 mmSlot head screws M 5Length 90 mm
K-15203-00-0-7
K-15203-00-0-5
9-38705-00-0-5
9-38705-00-0-7
9-38704-00-0-5
9-38704-00-0-7
9-38703-00-0-5
9-38703-00-0-7
9-38702-00-0-5
9-38702-00-0-7white
brown
white
brown
white
brown
white
brown
white
brown
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 sets
10 sets
Colours available: white RAL 9016, brown RAL 8077
220
108,5
220
91,5
28
28
Accessories
40
FERCOProfile cylinders Series 8800
janus cylinder system
AB
janus –sophisticated security technologyin an attractive design
Length Quantity Keys Article No.1 5 4512-0601
31 - 31 2 6 4512-06083 9 4512-06151 5 4512-0602
35 - 35 2 6 4512-06093 9 4512-06161 5 4512-0603
35 - 40 2 6 4512-06103 9 4512-06171 5 4512-0605
40 - 40 2 6 4512-06123 9 4512-06191 5 4512-0604
45 - 35 2 6 4512-06113 9 4512-06181 5 4512-0606
45 - 40 2 6 4512-06133 9 4512-06201 5 4512-0607
50 - 35 2 6 4512-06143 9 4512-0621
User friendly, smooth keywith rounded corners andedges.
The rounded tip ensures easyinsertion into the lock.
The pronounced key neck(10.5 mm) is particularly suit-able for the combination withsecurity escutcheons.
The exclusive key designhighlights the precious cha-racter of the janus cylindersystem.
The sandwich form of con-struction employed offersa wide choice of cylinderlengths.
Technical data and argumentation:The key profile system with pro-tected arrangement of variantsprovides for a clear separationbetween individual locks andcomplex locking functions inmaster key systems.
The configuration of the pintumblers, arranged in a radialpattern, results in a significantgain of security.
Extra protection is providedby the integral tamper prooffeature at each end of thecylinder.
Multiple rows of distinctiverecesses make unauthorizedcopying of the keys virtuallyimpossible.
Profile cylinder 8800Body brass, nickel-plated, satin finish, steel locking cam, with3 steel keys 4135, nickel-plated, without rosettesSteel fixing screw M 5 x 85, nickel-platedMushroom-shaped top pins, bottom pins and driver springs made ofwear-resistant, high-strength bronze alloy. Packing: one per boxLength Article No.A - B27 - 27 B 8800 000127 - 31 B 8800 000227 - 35 B 8800 000327 - 40 B 8800 000427 - 50 B 8800 000627 - 60 B 8800 000831 - 31 B 8800 010131 - 35 B 8800 010331 - 40 B 8800 010531 - 50 B 8800 010931 - 60 B 8800 023540 - 40 B 8800 023940 - 50 B 8800 051540 - 60 B 8800 051750 - 50 B 8800 024350 - 60 B 8800 0530
41
FERCOINLINE Sliding fittings
for aluminium windows and doors
Application
Range of applications for INLINE Sliding fittings:– Sliding windows with 1 to 2 sashes– Sliding doors with 1 to 2 sashes
Designs
GearBecause of its construction according to the principle of JET gears,the gear for INLINE sliding sashes fits into profiles with tilt-turnstandard groove of 16 mm. A steel gear case is welded onto theforend which includes locking pins and an anti-lifting pin.
Cylinder boltThe use of a cylinder bolt enables to lock the INLINE sliding doorswith key. Like the standard gear it includes locking pins and an anti-lifting pin.
Locking platesThe locking plates are made of galvanized and bichromated steel,optionally with lacquer finish, for a safe closing of the sash in theframe.
Materials, protection against rust
The fitting parts are made of high quality steel or zinc die-castingalloys; galvanized and yellow bichromated.
Abbreviations
G Fixed gear positionML Middle lock
Article Numbers
ExampleArticle No.G-15386-10-0-3
G-15386- - - Part number - -10- - Size - - -L- DIN left hand - - -R- DIN right hand - - -0- Usable on both sides - - -4- Gear with rosette fixings - - - -1 Anodized EV 1 / silver colour - - - -3 Yellow bichromated / brass colour - - - -7 White - - - -* Surface treatment variable (see price-list)
42
FERCOINLINE Sliding fittings
Gear, backset 15 mm, for aluminium windows and doors
Fitting requirementsQuantity Description Article No.
1 Gear, backset 15Length ML G600 2 300 G-13954-06-4-3
1000 2 500 G-13954-10-4-31600 2 800 G-13954-16-4-31800 3 900 G-13954-04-4-3
1, 2 or 3 Standard locking plate E-13880-00-0-31 Anti-lifting safety device E-18196-00-0-3
Anti-liftingsafety deviceE-18196-00-0-*
Locking plateE-13880-00-0-3
Locking plateE-13880-00-0-3
G
Gear, backset 15
Profile scheme with the requireddimensions for the installation ofthese fittings
12
2.5 min 6
min 30
HandleDIRIGENT-F6-28072-33-0-*Countersunkscrew M 5 x 409-13255-40
Rosette /FInside, flat6-24913-00-0-*
Removable handleDIRIGENT-F/SGSpindle 338-00694-33-0-*
12.5
12.5
16.5
GArticle No.
43
FERCOINLINE Sliding fittings
Gear, backset 7.5 mm, for aluminium windows and doors
Fitting requirementsQuantity Description Article No.
1 Gear, backset 7.5Length ML G125 1 G-19505-09-0-3600 2 300 G-15383-06-0E3
1000 2 500 G-15383-10-0E31800 3 900 G-15383-18-0E3
1, 2 or 3 Standard locking plate E-13880-00-0-31 Anti-lifting safety device E-18196-00-0-3
Locking plateE-13880-00-0-3
Gear, backset 7.5
Locking plateE-13880-00-0-3
Anti-liftingsafety deviceE-18196-00-0-*
HandleDIRIGENT-F6-28072-33-0-*Countersunkscrew M 5 x 409-13255-40
Rosette /FInside, flat6-24913-00-0-*
Removable handleDIRIGENT-F/SGSpindle 338-00694-33-0-*
Profile scheme with the requireddimensions for the installation ofthese fittings
12
2.5 min 6
min 30
12.5
12.5
16.5
44
FERCOLocking handles EURIS
Gear backset 15 mm, for aluminium sliding sashes
Locking plateface fixedE-12899-00-0-1
Locking plateface fixedG-11337-00-0-1
Locking plateG-12898-00-0-1
Locking platewith inox clipG-13945-00-0-1
Locking plateface fixedE-12908-00-0-1
MA CFM1
B1
G-46669-00-0-* G-46666-00-0-* G-19638-00-0-*
G-19700-00-0-*
P2B
G-19694-00-0-*
CE CEM
G-19639-00-0-*Profile thicknessfrom 35 mm
G-19941-00-0-*Profile thicknessfrom 27 mm
P1 P2
G-19682-00-0-* G-46630-00-0-* Wrong operationsafety deviceG-46690-**-0-6(upon request)
LatchboltE-19542-**-0-8(upon request)
Mounting kitfor cylinderG-19628-00-0-0
Locking cylinder
Locking plates
Profile thickness Article No.
26 - 30 mm G-46681-17-*-030 - 38 mm G-46681-27-*-040 - 45 mm G-46681-37-*-0
* 0 = standard* 4 = all keys alike
45
FERCO
for aluminium doors and windows
Parallel Slide and Tilt fittings
ApplicationRange of applications for G.U Parallel Slide and Tilt fittings:– Parallel Slide and Tilt doors with 2 to 4 sashes,– Parallel Slide and Tilt windows with 2 to 4 sashes,each with running and gliding rails.
DesignsParallel Slide and Tilt fittings G.U-968/200 mZFittings for single sashes up to 200 kg [1]; with 4-wheel carriagesand clamp fixed connecting rod. Wheels with PVC-coated groovedball bearings. Locking mechanism G.U-mZ with forced control andgeared handle – opening movement 111 mm. Lockable cylindergear with 40 mm backset, prepared for use with a profile cylinder.SW 740-2000 mm, SH 895-2400 mm.
Parallel Slide and Tilt fittings G.U-968/150 mZFittings for single sashes up to 150 kg; with 4-wheel carriagesand clamp fixed connecting rod. Wheels with forced control andgeared handle – opening movement 111 mm. Lockable cylindergear with 40 mm backset, prepared for use with a profile cylinder.SW 740-1600 mm, SH 895-2400 mm.
Parallel Slide and Tilt fittings G.U-968/150 oZFittings for single sashes up to 130 kg; with 4-wheel carriagesand clamp fixed connecting rod. Wheels with PVC-coated groovedball bearings. Locking mechanism G.U-oZ without forced control.All locking parts are adapted to the Euro-groove 15/20 mm. Thelocking pins of the gear parts and corner transmissions are adjust-able. The clampable locking plates are fixed or also adjustable andensure an optimized sash pressure. The corner transmissions areprovided with rust-proof 4-leaf stainless steel spring assemblies.SW 600-1600 mm, SH 720-2400 mm.
[1] The carriages G.U-966/200 may be charged with 200 kg in caseof special fixing according to assembly drawing. Between SW 1851and 2000 mm the use of a middle stay arm is necessary; betweenSW 1601 and 2000 mm the use of tandem runners and a middlestay arm.
HandlesThe handles are made of aluminium with concealed fixings. Rosetteswith robust retaining feature. Standard version for Parallel Slide andTilt fittings G.U-968/200 mZ and G.U-968/150 mZ: geared handleDIRIGENT with anti-lockout device; standard version for ParallelSlide and Tilt fittings G.U-968/150 oZ: geared handle DIRIGENT.Handles for operation from both sides complete the programme.
Running rails P 1213, P 1300Aluminium running rails, suitable for use with Parallel Slide and Tiltsashes with standard and special fittings.
Gliding rail P 1225Aluminium gliding rail for Parallel Slide and Tilt sashes (top guide).
Standard coloursParallel Slide and Tilt fittings are supplied in the following standardcolours:
EV 1 Visible aluminium parts anodized EV 1,cover profiles grey
UC 3 Visible aluminium parts anodized medium bronze,cover profiles medium brown
UC 5 Visible aluminium parts anodized dark bronze,cover profiles dark brown
White Visible aluminium parts anodized EV 1,cover profiles white
Materials, surface sealing ferGUard* silver andferGUard* yellowThe fitting parts are made of high quality steel, zinc die-casting andaluminium alloys.According to the material they are protected against corrosion by thesurface sealing ferGUard* silver or ferGUard* yellow, aluminiumparts are anodized.
AbbreviationsG Fixed gear positionGV Variable gear positionlh left handML Middle lockPU Packing unitPZ Profile cylinderrh right handSe Security fittingsSH Sash heightST Sash thicknessSW Sash widthTFW Total frame width
Article NumbersExampleArticle No.6-23830-01-0-3
6-23830- - - Part number- -01- - Size- - -L- Left hand (gear side)- - -R- Right hand (gear side)- - -0- Usable on both sides- - - -1T Nickel silver- - - -1 F 1/EV 1, natural or silver colour, zinc die-casting
parts galvanized and blue bichromated- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass or brass colour, steel
parts galvanized and yellow bichromated- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black, powder-coated (RAL 9005)- - - -7 White, powder-coated (RAL 9016)- - - -7T White, powder-coated (RAL 9010)- - - -8 Stainless steel oder inox colour- - - -* Surface treatment variable (see price-list)
46
FERCO
Geared handles DIRIGENT
Box of geared handle G.U-mZDIRIGENT with anti-lockout devicefor aluminium doors and windows
Euro-groove 15/20Assembly lh K-14712-00-L-*Assembly rh K-14712-00-R-*
Profile system HartmannAssembly lh K-15042-00-L-*Assembly rh K-15042-00-R-*
Profile system HueckAssembly lh K-15046-00-L-*Assembly rh K-15046-00-R-*
Box of geared handle G.U-mZDIRIGENT with anti-lockout device,lockable – keyed alike,for aluminium doors and windows
Euro-groove 15/20Assembly lh K-14711-00-L-*Assembly rh K-14711-00-R-*
Profile system HartmannAssembly lh K-15043-00-L-*Assembly rh K-15043-00-R-*
Profile system HueckAssembly lh K-15047-00-L-*Assembly rh K-15047-00-R-*
Geared handles and handles forParallel Slide and Tilt fittings G.U-968/200 mZ and G.U-968/150 mZ
1 geared handle1 carrier2 countersunk sheet metal screws 4.8x322 countersunk screws M 5 x 252 HEX nuts M 5
1 handle inside2 conical notched pins
Bag of handle inside G.U-mZDIRIGENT with cylinder bore, without camsfor aluminium doors and windows6-24623-00-0-*
Handle DIRIGENT inside
Handles DIRIGENT for operation from both sides
Bag of handle for operationfrom both sides G.U-mZHeight outside 15 mmDIRIGENT with cylinder bore and camsfor aluminium doorsK-13167-00-0-*
Bag of handle for operationfrom both sides G.U-mZHeight outside 30 mmDIRIGENT with cylinder bore and camsfor aluminium doorsK-12919-00-0-*
1 handle in- and outside2 countersunk screws M 6 x 85
1 handle in- and outside2 countersunk screws M 6 x 75
Countersunk screw DIN 965,operation from both sidesST
-60 mm M 6 x 75 9-13274-7561-65 mm M 6 x 80 9-13274-8066-70 mm M 6 x 85 9-13274-8571-78 mm M 6 x 90 9-13274-90
Optional parts
1 geared handle1 carrier2 countersunk sheet metal screws 4.8x322 countersunk screws M 5 x 252 HEX nuts M 5
47
FERCO
Parallel Slide and Tilt fittings G.U-968/200 mZTandem runners for sashes to 200 kg
Box of tandem runners G.U-968/200 Tfor aluminium doors
Assembly lh K-15509-00-L-0Assembly lh K-15509-00-R-0
containing:1 runner G.U-968/200 T, front1 runner G.U-968/200 T, rear2 connecting rods, Ø 10 mm
Parallel Slide and Tilt fittings G.U-968/200 mZBox of middle stay arm G.U-mZ for sash widths to 2000 mm
Middle stay arm G.U-mZ with stay arm glider and cover
Standard versionMiddle stay arm G.U-mZAssembly lh 6-29349-02-L-8Assembly rh 6-29349-02-R-8Stay arm glider 6-22755-00-0-0Cover for middle stay arm 9-35573-00-0-*
Profile system HartmannMiddle stay arm G.U-mZAssembly lh 6-29349-04-L-8Assembly rh 6-29349-04-R-8Stay arm glider 6-22755-00-0-0Cover for middle stay arm 9-35573-00-0-*
Profile system HueckMiddle stay arm G.U-mZAssembly lh 6-29349-03-L-8Assembly rh 6-29349-03-R-8Stay arm glider 6-22755-00-0-0Cover for middle stay arm 9-35573-00-0-*
Optional parts
ApplicationSash weight 180 to 200 kgSash width SW 1601 to 2000 mm
Runner T, front Runner T, rearRod Rod
ApplicationSash weight to 180 kg SW 1851 to 2000 mmSash weight 180 to 200 kg SW 1601 to 2000 mm
Parallel Slide and Tilt fittings G.U-968/200 mZ,G.U-968/150 mZ, G.U-968/150 oZ
PST stop P 12256-30388-00-0-6
48
FERCOOptional parts
Geared handles SPACIO and accessories for Parallel Slide and Tilt fittings G.U-968/150 oZ
Bag of geared handleSPACIO, with fixing screwsG-46551-00-0-*
Geared handles SPACIO, aluminium with lacquer finish1 carrier 22 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handleSPACIO, with fixing screwsand 2 keysG-46553-00-0-*
Bag of geared rosette SPACIO,with fixing screwsG-46555-00-0-*Removable handle SPACIOG-18888-00-0-*
Bag of geared handleSPACIO, with fixing screwsG-46595-00-0-*
Geared handles SPACIO, aluminium with lacquer finish1 carrier 33 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handleSPACIO, with fixing screwsand 2 keysG-46597-00-0-*
Bag of geared rosette SPACIO,with fixing screwsG-46596-00-0-*Removable handle SPACIOG-18888-00-0-*
Bag of geared handle SPACIO,right hand, with fixing screwsG-46552-00-R-*
Geared handles SPACIO, aluminium with lacquer finish2 carriers 22 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handleSPACIO, right hand, withfixing screws and 2 keysG-46554-00-R-*
Bag of geared rosette SPACIO,right hand, with fixing screwsG-46556-00-R-*Removable handle SPACIOG-18888-00-0-*
Bag of accessories forconversion of handlesonly delivered righthand into left handG-46550-00-L-1
49
FERCO
Handles DIRIGENT-F and accessoriesParallel Slide and Tilt fittings G.U-968/150 oZ for doors and windows with mill-in gear
DIRIGENT-Fwithout spindle6-28072-00-0-*
DIRIGENT-F/AFoutside – flat6-25223-00-0-*
DIRIGENT-Fwithout spindle6-28072-00-0-*
DIRIGENT-F/Aoutside6-25993-00-0-*
Bags of handles DIRIGENT-F
Optional parts
Rosette PZinside6-25224-02-0-*
Spindle9-26874-56-0-1
Bag of handlesDIRIGENT-F/AF, DIRIGENT-FK-14775-70-0-*
Rosette PZ/Aoutside9-32407-02-0-*
Countersunk screwM 5 x 709-13255-70
Rosette PZinside6-25224-02-0-*
Spindle9-26874-56-0-1
Bag of handlesDIRIGENT-F/A, DIRIGENT-FK-14776-70-0-*
Rosette PZ/Aoutside9-32407-02-0-*
Countersunk screwM 5 x 709-13255-70
Long handleDIRIGENT-HLSpindle 296-28646-00-0-*
Rosette /Finside – flat6-24913-00-0-*
DIRIGENT-F/SG,removableSpindle 338-00694-33-0-*
DIRIGENT-F withanti-lockout deviceSpindle 296-25384-00-0-*
DIRIGENT-F/Z withpush-button cylinder,keyed alikeSpindle 296-28075-29-0-*
DIRIGENT-FSpindle 296-28072-29-0-*
Handles DIRIGENT-F
DIRIGENT-Fwithout spindle6-28072-00-0-*
DIRIGENT-F/AFoutside – flat6-25223-00-0-*
DIRIGENT-F/Aoutside6-25993-00-0-*
Pull handle, outside9-22921-00-0-*
Mill-in gear, 180°Backset 25-50 mm6-25916-**-0-1
Locking elementwith cylinder boreBackset 25-50 mm6-25918-**-0-1
Inside operationCountersunk screwM 5 x 359-13255-35
Mill-in gear, 180°with wrong operationsafety deviceBackset 14 mm6-30534-00-0-1
Mill-in gear, 180°without wrongoperation safetydeviceBackset 14 mm6-31280-00-0-1
Pull handle,outside9-22921-00-0-*
Inside operationCountersunk screwM 5 x 35 9-13255-35
In- and outside operationCountersunk screw M 5ST 51-60 9-13255-60ST 61-70 9-13255-70ST 71-80 9-13255-80
Rosette insidewith cylinder bore6-25224-02-0-*
Rosette outsidewith cylinder bore9-32407-02-0-*
SpindleST 56-689-26874-56-0-1ST 69-809-26874-69-0-1
50
FERCO
for aluminium doors and windows
Parallel Slide and Tilt fittings
Sash arrangement according to schemes A to K
Scheme A – with centre mullion1 Parallel Slide and Tilt door, 1 fixglazed sashDrawing: Handle position left hand
Scheme A – with centre mullion [1]1 Parallel Slide and Tilt door, 1 side hung sashDrawing: Handle position left hand
Scheme D – without mullion [2]1 Parallel Slide and Tilt door, 1 side hungsash – Drawing: Handle position left hand
Scheme C – with mullions2 Parallel Slide and Tilt doors, 2 fixglazed sashesDrawing: First opening sash with handle position left hand
Scheme G – with mullions1 Parallel Slide and Tilt door, 2 fixglazed sashesDrawing: Handle position left hand
➜➜
Scheme G – with mullions [1]1 Parallel Slide and Tilt door, 2 side hung sashesDrawing: Handle position left hand
Scheme C – with mullions [1]2 Parallel Slide and Tilt doors, 2 side hung sashesDrawing: First opening sash with handle position left hand
Scheme K – with mullions2 Parallel Slide and Tilt doors, 1 fixglazed sashDrawing: Handle position left hand and right hand
➜
➜➜➜
➜ ➜ ➜
➜➜
Legend:[1] Schemes A, C and G with side hung sashes:
Side hung fittings JET with removable handleand geared rosette, locking plates according to profile.
[2] Scheme D:Side hung sash with inactive sash fittings JET,locking plates according to profile.
51
FERCO
[1] For a distance of < 5 mm a milling operation is necessary in the field of the stay arm.
Drilling and milling dimensionsfor geared handle G.U-mZ
Assembly dimensions for frame and sash
22
5 mm
SW / SH
20 15
21 > 2
5
Dimensions of the frame groove
10/14 mm 12/15 mm 14/18 mm
14 10 15 12 1418
6,0
10
Drilling dimensionsfor push rod
Product information
Parallel Slide and Tilt fittings G.U-968/200 mZ and G.U-968/150 mZAssembly, drilling and milling dimensions for handles and runners
Drilling dimensions for runners G.U-968/200 and G.U-968/150
60 30 30 4545
32-4
3
Drilling and milling dimensions forhandle G.U-mZ inside, with cylinder bore
Ø 3.2 for countersunksheet metal screw 3.9
Centre of sash
52
FERCO
Assembly dimensions for frame and sash
22SW / FH
20 15
21 > 2
5
Dimensions of the frame groove
10/14 mm 12/15 mm 14/18 mm
14 10 15 12 1418
6,0
10
Drilling dimensionsfor push rod
Parallel Slide and Tilt fittings G.U-968/150 oZAssembly, drilling and milling dimensions for handles and runners
Product information
Drilling dimensions for runners G.U-968/150
60 30 30 4545
32-4
3
Drilling and millingdimensions formill-in gears6-25916-**-0-16-25917-**-0-16-25948-**-0-1
Back-set+ 11
** Available backsets: 25 - 35 - 40 - 45 - 50 mm
Drilling and millingdimensions forlocking elementwith cylinder bore6-25918-**-0-1
53
FERCO
Lengths of push rods
L = SW – 700
Schemes A, D, G and K without middle lock – top
Schemes A, D, G and K with middle lock – top
L = SW/2 – 428L = SW/2 – 428
Schemes A, D, G and K with middle lock – bottom
L = SW/2 – 428
Schemes A, D, G and K without middle lock – bottom
L = SW – 700
L = SW/2 – 428
Schemes A, C, D, G and KHandle side – topL = SH – G – 433
Schemes A, C, D, G and KHandle side – bottomL = G – 388
Schemes A, C, D, G and Kwith middle lockLocking side – topL = G – 388
Schemes A, C, D, G and Kwith middle lockLocking side – bottomL = SH – G – 433
Schemes A, C, D, G and Kwithout middle lockLocking sideL = SH – 665
Locking pin element L = SW – 700
Scheme C without middle lock – top
Scheme C with middle lock – top
Locking pin element L = SW – 1056 L = 200
Scheme C with middle lock – bottom
Locking pin element L = SW – 1056 L = 200
Locking pin element L = SW – 700
Scheme C without middle lock – bottomAbbreviationsG Gear positionL LengthSH Sash heightSW Sash width
Product information
Parallel Slide and Tilt fittings G.U-968/200 mZ and G.U-968/150 mZShortening dimensions for push rods, width of sash overlap 22 mm
54
FERCO
Lengths of push rods
L = SW – 207
Schemes A, D, G and K without middle lock – top
Scheme C with middle lock – top
Scheme C without middle lock – top
Schemes A, D, G and K with middle lock – top
L = SW/2 – 186L = SW/2 – 88
L = 55 L = SW/2 – 186
L = 55
L = SW/2 – 199
L = SW – 318
Schemes A, C, D, G and K with middle lock – bottom
L = SW/2 – 366
Schemes A, C, D, G and K without middle lock – bottom
L = SW – 536
L = SW/2 – 237
AbbreviationsG Gear positionL LengthSH Sash heightSW Sash width
Schemes A, C, D, G and KHandle side – topL = SH – G – 448
Schemes A, C, D, G and KHandle side – bottomL = G – 170
Schemes A, C, D, G and KLocking sideL = SH/2 – 88
Product information
Parallel Slide and Tilt fittings G.U-968/150 oZShortening dimensions for push rods, width of sash overlap 22 mm
55
FERCO
Application Description Article No.G.U-968/200 mZ, G.U-968/150 mZ Aluminium doors and windowsAssembly of handles Drilling jig for geared handle 6-28894-00-0-0
Drilling jig for handle inside and for operation from both sides 6-24025-00-0-1Stop for drilling jigs 6-28894 and 6-24025 9-27406-00-0-1Drilling jig for cylinder gear – Euro-groove 15/20 and Hueck 9-27272-01-0-0
Assembly of runners, stay arms, Drilling jig for runners and support 6-28917-00-0-0gliding and running rails Drilling jig for corner transmissions and stay arms
– Euro-groove 15/20 and Hueck 6-28336-02-0-3– Hartmann 6-28336-04-0-3Drilling jig for gliding and running rails 6-24696-00-0-3Drilling jig for fixing pin 6-30447-00-0-0Assembly jig for gliding rail 6-23246-00-0-0Assembly jig for running rail 6-23241-00-0-0
G.U-968/150 oZ Aluminium doors and windowsAssembly of handles Drilling jig for geared handle 6-25373-01-0-0
Drilling jig for mill-in gear 6-26191-00-0-0Assembly of runners, stay arms, Drilling jig for runners and support 6-28917-00-0-0gliding and running rails Drilling jig for gliding and running rails 6-24696-00-0-3
Drilling jig for fixing pin 6-30447-00-0-0Assembly jig for gliding rail 6-23246-00-0-0Assembly jig for running rail 6-23241-00-0-0
Drilling and assembly jigs
Parallel Slide and Tilt fittings G.U-968/200 mZ, G.U-968/150 mZ, G.U-968/150 oZ
56
FERCO
Fitting requirements according to size of sashes for schemes A to K [3]Quantity Description Article No.A C D G K [2] Handle pos. lh Handle pos. rh1 2• 1 1 2• Box of runners G.U-968/200 K-15268-00-L-0 K-15268-00-R-01 2• 1 1 2• Box of stay arms G.U-mZ K-14713-00-L-8 K-14713-00-R-81 2• 1 1 2• Middle stay arm G.U-mZ 6-29349-02-L-8 6-29349-02-R-81 2 1 1 2 Stay arm glider 6-22755-00-0-01 2 1 1 2 Cover for middle stay arm 9-35573-00-0-*
SW1851-2000
1 2• 1 1 2• Box of geared handle G.U-mZ [1]DIRIGENT with anti-lockout device K-14712-00-L-* K-14712-00-R-*Locking pin element 6-27866-02-0-0SW SH SW (C) SH (C)
1 2 1 1 2 740-1200 895-1200 840-1500 895-12002 4 2 2 4 1201-2400 1201-24003 3 3 6 1201-1600 895-12004 4 4 8 1201-24005 6 5 5 10 1601-1850 895-1200 1501-1850 895-12006 8 6 6 12 1201-2400 1201-24007 10 7 7 14 1851-2000 895-1200 1851-2000 895-12008 12 8 8 16 1201-2400 1201-2400
4 Locking pin element C 6-27872-02-0-01 Fixing pin D for control part 9-39897-00-0-1
1 2 1 1 2 Bag of profiles G.U-968/200 [1]SW740- 850 K-15269-20-0-*851-1100 K-15269-25-0-*
1101-1350 K-15269-30-0-*1351-1600 K-15269-35-0-*1601-1850 K-15269-40-0-*1851-2000 K-15269-45-0-*
2 4 2 2 4 Positioning plateFrame groove 10/14 mm 6-25587-01-0-1Frame groove 12/15 mm 6-25587-02-0-1Frame groove 14/18 mm 6-25587-03-0-1Locking plateFrame groove 10/14 mm 6-28734-10-0-1Frame groove 12/15 mm 6-28734-12-0-1Frame groove 14/18 mm 6-28734-14-0-1SW SH SW (C) SH (C)
5 12 5 5 10 740-1200 895-1200 840-1500 895-12007 15 7 7 14 1201-2400 1201-24007 7 7 14 1201-1600 895-12009 9 9 18 1201-24009 16 9 9 18 1601-1850 895-1200 1501-1850 895-1200
11 19 11 11 22 1201-2400 1201-240011 18 11 11 22 1851-2000 895-1200 1851-2000 895-120013 21 13 13 26 1201-2400 1201-2400[1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white[2] • = 1 box with handle position lh, 1 box with handle position rh[3] = Push rod holes with diameter 6.0 mm; optionally available with diameter 5.2 mmNote:From SW 1851 to 2000 mm a middle stay arm must be installed.From SW 1601 to 2000 mm and a sash weight from 180 to 200 kgtandem runners and a middle stay arm must be installed.
End cap 9-34523-00-0-*, gliding rail P 1225 Cover rail P 1480
Positioningplate acc.to profile
Corner transmission 6-28452-02-0-8Spring element 6-28447-02-0-0Cover 9-32227-01-0-1
Positioningplate acc.to profile
Locking pin elementLocking plate acc. to frame groove
Adapter, rear6-28449-02-0-0
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, front, lh 6-29656-02-L-8Stay arm, front, rh 6-29656-02-R-8
Locking pin elementLocking plateacc. to frame groove
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, rear, lh 6-29657-02-L-8Stay arm, rear, rh 6-29657-02-R-8
Geared handleDIRIGENTlh 6-28828-00-L-*rh 6-28828-00-R-*HEX nut9-13214Countersunk screw9-13133-25Countersunk sheetmetal screw9-13089-09
Carrier6-27862-02
Locking pin element
Locking pin element
Anti-liftingsecurity device6-24792-01-0-1
Runner, frontlh 6-29556-00-L-0rh 6-29556-00-R-0End caplh 9-38520-00-L-*rh 9-38520-00-R-*
Countersunk sheetmetal screw 9-13151-38Cover 9-26687-00-0-*
Runner, rearlh 6-29557-00-L-0rh 6-29557-00-R-0End caplh 9-38520-00-L-*rh 9-38520-00-R-*
Running rail P 1213 Control part6-29562-00-0-*
Spring-loaded buffer6-29564-00-0-*
Connecting rod9-23055-**-0-1Support9-38527-00-0-0
Guide6-29750-00-0-1Cover railP 1603
Parallel Slide and Tilt fittings G.U-968/200 mZ
Doors and windows with geared handle inside for sash profiles with Euro-groove 15/20 mm
57
FERCO
Fitting requirements according to size of sashes for schemes A to K [3]Quantity Description Article No.A C D G K [2] Handle pos. lh Handle pos. rh1 2• 1 1 2• Box of runners G.U-968/200 K-15268-00-L-0 K-15268-00-R-01 2• 1 1 2• Box of stay arms G.U-mZ K-14713-00-L-8 K-14713-00-R-81 2• 1 1 2• Middle stay arm G.U-mZ 6-29349-02-L-8 6-29349-02-R-81 2 1 1 2 Stay arm glider 6-22755-00-0-01 2 1 1 2 Cover for middle stay arm 9-35573-00-0-*
SW1851-2000
1 2• 1 1 2• Handle inside G.U-mZ [1]DIRIGENT with cylinder bore 6-24623-00-0-*
1 2 1 1 2 Bag of cylinder gear D 40Backset 40 mm K-14714-00-0-1Locking pin element 6-27866-02-0-0SW SH SW (C) SH (C)
5 10 5 5 10 740-1200 1715-2400 840-1500 1715-24007 7 7 14 1201-1600 1715-24009 14 9 9 18 1601-1850 1715-2400 1501-1850 1715-2400
11 18 11 11 22 1851-2000 1715-2400 1851-2000 1715-24004 Locking pin element C 6-27872-02-0-0
1 Fixing pin D for control part 9-39897-00-0-11 2 1 1 2 Bag of profiles G.U-968/200 [1]
SW740- 850 K-15269-20-0-*851-1100 K-15269-25-0-*
1101-1350 K-15269-30-0-*1351-1600 K-15269-35-0-*1601-1850 K-15269-40-0-*1851-2000 K-15269-45-0-*
2 4 2 2 4 Positioning plateFrame groove 10/14 mm 6-25587-01-0-1Frame groove 12/15 mm 6-25587-02-0-1Frame groove 14/18 mm 6-25587-03-0-1Locking plateFrame groove 10/14 mm 6-28734-10-0-1Frame groove 12/15 mm 6-28734-12-0-1Frame groove 14/18 mm 6-28734-14-0-1SW SH SW (C) SH (C)
9 18 9 9 18 740-1200 1715-2400 840-1500 1715-240011 11 11 22 1201-1600 1715-240013 22 13 13 26 1601-1850 1715-2400 1501-1850 1715-240015 26 15 15 30 1851-2000 1715-2400 1851-2000 1715-2400[1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white[2] • = 1 box with handle position lh, 1 box with handle position rh[3] = Push rod holes with diameter 6.0 mmNote:From SW 1851 to 2000 mm a middle stay arm must be installed.From SW 1601 to 2000 mm and a sash weight from 180 to 200 kgtandem runners and a middle stay arm must be installed.
End cap 9-34523-00-0-*, gliding rail P 1225 Cover rail P 1480
Positioningplate acc.to profile
Corner transmission 6-28452-02-0-8Spring element 6-28447-02-0-0Cover 9-32227-01-0-1
Positioningplate acc.to profile
Locking pin elementLocking plate acc. to frame groove
Adapter, rear6-28449-02-0-0
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, front, lh 6-29656-02-L-8Stay arm, front, rh 6-29656-02-R-8
Locking pin elementLocking plateacc. to frame groove
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, rear, lh 6-29657-02-L-8Stay arm, rear, rh 6-29657-02-R-8
Locking pin element
Locking pin element
Anti-liftingsecurity device6-24792-01-0-1
Runner, frontlh 6-29556-00-L-0rh 6-29556-00-R-0End caplh 9-38520-00-L-*rh 9-38520-00-R-*
Countersunk sheetmetal screw 9-13151-38Cover 9-26687-00-0-*
Runner, rearlh 6-29557-00-L-0rh 6-29557-00-R-0End caplh 9-38520-00-L-*rh 9-38520-00-R-*
Running rail P 1213 Control part6-29562-00-0-*
Spring-loaded buffer6-29564-00-0-*
Connecting rod9-23055-**-0-1Support9-38527-00-0-0
Guide6-29750-00-0-1Cover railP 1603
Handle DIRIGENTinside, without camsConical notched pins
Cylinder gearConical notched pins
Parallel Slide and Tilt fittings G.U-968/200 mZ
Doors and windows with cylinder gear, lockable, for sash profiles with Euro-groove 15/20 mm
58
FERCO
Fitting requirements according to size of sashes for schemes A to K [3]Quantity Description Article No.A C D G K [2] Handle pos. lh Handle pos. rh1 2• 1 1 2• Box of runners G.U-968/150 K-15278-00-L-0 K-15278-00-R-01 2• 1 1 2• Box of stay arms G.U-mZ K-14713-00-L-8 K-14713-00-R-81 2• 1 1 2• Box of geared handle G.U-mZ [1]
DIRIGENT with anti-lockout device K-14712-00-L-* K-14712-00-R-*Locking pin element 6-27866-02-0-0SW SH SW (C) SH (C)
1 2 1 1 2 740-1200 895-1200 840-1500 895-12002 4 2 2 4 1201-2400 1201-24003 6 3 3 6 1201-1600 895-1200 1501-1600 895-12004 8 4 4 8 1201-2400 1201-2400
4 Locking pin element C 6-27872-02-0-01 2 1 1 2 Bag of profiles G.U-968/150 [1]
SW740- 850 K-15279-20-0-*851-1100 K-15279-25-0-*
1101-1350 K-15279-30-0-*1351-1600 K-15279-35-0-*
2 4 2 2 4 Positioning plateFrame groove 10/14 mm 6-25587-01-0-1Frame groove 12/15 mm 6-25587-02-0-1Frame groove 14/18 mm 6-25587-03-0-1Locking plateFrame groove 10/14 mm 6-28734-10-0-1Frame groove 12/15 mm 6-28734-12-0-1Frame groove 14/18 mm 6-28734-14-0-1SW SH SW (C) SH (C)
5 12 5 5 10 740-1200 895-1200 840-1500 895-12007 15 7 7 14 1201-2400 1201-24007 16 7 7 14 1201-1600 895-1200 1501-1600 895-12009 19 9 9 18 1201-2400 1201-2400
[1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white[2] • = 1 box with handle position lh, 1 box with handle position rh[3] = Push rod holes with diameter 6.0 mm; optionally available with diameter 5.2 mmNote: Max. sash weight 150 kg
End cap 9-34523-00-0-*, gliding rail P 1225 Cover rail P 1480
Positioningplate acc.to profile
Corner transmission 6-28452-02-0-8Spring element 6-28447-02-0-0Cover 9-32227-01-0-1
Positioningplate acc.to profile
Locking pin elementLocking plate acc. to frame groove
Adapter, rear6-28449-02-0-0
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, front, lh 6-29656-02-L-8Stay arm, front, rh 6-29656-02-R-8
Locking pin elementLocking plateacc. to frame groove
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, rear, lh 6-29657-02-L-8Stay arm, rear, rh 6-29657-02-R-8
Geared handleDIRIGENTlh 6-28828-00-L-*rh 6-28828-00-R-*HEX nut9-13214Countersunk screw9-13133-25Countersunk sheetmetal screw9-13089-09
Carrier6-27862-02
Locking pin element
Locking pin element
Anti-liftingsecurity device6-24792-01-0-1
Runner, frontlh 6-29560-00-L-0rh 6-29560-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Countersunk sheetmetal screw 9-13151-38Cover 9-26687-00-0-*
Runner, rearlh 6-29561-00-L-0rh 6-29561-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Spring-loaded buffer6-29565-00-0-*
Control part6-29563-00-0-*
Running rail P 1300
Connecting rod9-25476-**-0-1Support9-38527-00-0-0
Guide6-24764-00-0-0Cover railP 1608
Parallel Slide and Tilt fittings G.U-968/150 mZ
Doors and windows with geared handle inside for sash profiles with Euro-groove 15/20 mm
59
FERCO
Fitting requirements according to size of sashes for schemes A to K [3]Quantity Description Article No.A C D G K [2] Handle pos. lh Handle pos. rh1 2• 1 1 2• Box of runners G.U-968/150 K-15278-00-L-0 K-15278-00-R-01 2• 1 1 2• Box of stay arms G.U-mZ K-14713-00-L-8 K-14713-00-R-81 2• 1 1 2• Handle inside G.U-mZ [1]
DIRIGENT with cylinder bore 6-24623-00-0-*1 2 1 1 2 Bag of cylinder gear D 40
Backset 40 mm K-14714-00-0-1Locking pin element 6-27866-02-0-0SW SH SW (C) SH (C)
5 10 5 5 10 740-1200 1715-2400 840-1500 1715-24007 14 7 7 14 1201-1600 1715-2400 1501-1600 1715-2400
4 Locking pin element C 6-27872-02-0-01 2 1 1 2 Bag of profiles G.U-968/150 [1]
SW740- 850 K-15279-20-0-*851-1100 K-15279-25-0-*
1101-1350 K-15279-30-0-*1351-1600 K-15279-35-0-*
2 4 2 2 4 Positioning plateFrame groove 10/14 mm 6-25587-01-0-1Frame groove 12/15 mm 6-25587-02-0-1Frame groove 14/18 mm 6-25587-03-0-1Locking plateFrame groove 10/14 mm 6-28734-10-0-1Frame groove 12/15 mm 6-28734-12-0-1Frame groove 14/18 mm 6-28734-14-0-1SW SH SW (C) SH (C)
9 18 9 9 18 740-1200 1715-2400 840-1500 1715-240011 22 11 11 22 1201-1600 1715-2400 1501-1600 1715-2400[1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white[2] • = 1 box with handle position lh, 1 box with handle position rh[3] = Push rod holes with diameter 6.0 mmNote: Max. sash weight 150 kg
End cap 9-34523-00-0-*, gliding rail P 1225 Cover rail P 1480
Positioningplate acc.to profile
Corner transmission 6-28452-02-0-8Spring element 6-28447-02-0-0Cover 9-32227-01-0-1
Positioningplate acc.to profile
Locking pin elementLocking plate acc. to frame groove
Adapter, rear6-28449-02-0-0
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, front, lh 6-29656-02-L-8Stay arm, front, rh 6-29656-02-R-8
Locking pin elementLocking plateacc. to frame groove
Stay arm glider 6-22755-00-0-0Stay arm cover 9-35573-00-0-*Stay arm, rear, lh 6-29657-02-L-8Stay arm, rear, rh 6-29657-02-R-8
Locking pin element
Locking pin element
Anti-liftingsecurity device6-24792-01-0-1
Runner, frontlh 6-29560-00-L-0rh 6-29560-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Countersunk sheetmetal screw 9-13151-38Cover 9-26687-00-0-*
Runner, rearlh 6-29561-00-L-0rh 6-29561-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Spring-loaded buffer6-29565-00-0-*
Control part6-29563-00-0-*
Running rail P 1300
Connecting rod9-25476-**-0-1Support9-38527-00-0-0
Guide6-24764-00-0-0Cover railP 1608
Handle DIRIGENTinside, without camsConical notched pins
Cylinder gearConical notched pins
Parallel Slide and Tilt fittings G.U-968/150 mZ
Doors and windows with cylinder gear, lockable, for sash profiles with Euro-groove 15/20 mm
60
FERCO
Corner transmission6-24529-00-0-1
Adapter, rear6-24790-02-0-1
Positioningplate acc.to profile
Positioningplate acc.to profile
Adapter, front6-24789-02-0-1
Locking pin element 6-24539-00-0-1Locking plate acc. to profile
Cover rail P 1480End cap 9-34523-00-0-*, gliding rail P 1225
Locking pin element6-24539-00-0-1
Locking pin element6-24539-00-0-1
Corner transmission6-24529-00-0-1
ScrewNut
Stay arm glider 6-22755-00-0-0Stay arm
Stay arm glider 6-22755-00-0-0Stay arm
End caplh 9-34517-00-L-*rh 9-34517-00-R-*
Cover rail P 1481
End caplh 9-34517-00-L-*rh 9-34517-00-R-*
Corner transmission6-24529-00-0-1
Cover9-32227-01-0-*Spring element6-24791-02-0-0
Carrier6-24528-00-0-1Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Locking plateAnti-liftingsecurity device6-24792-01-0-1
Locking pinelement6-24539-00-0-1
Fitting requirements according to size of sashes for schemes A to K [3]Quantity Description Article No.A C D G K [2] Handle pos. lh Handle pos. rh1 2• 1 1 2• Box of runners G.U-968/150 K-15278-00-L-0 K-15278-00-R-01 2 1 1 2 Box of adapters G.U-oZ K-14141-02-0-01 2 1 1 2 Bag of geared handle [1] G-45978-00-0-*
DIRIGENT1 2 1 1 2 Bag of locking parts G.U-oZ
Frame groove 10/14 mm G-14748-01-0-1Frame groove 12/15 mm G-14749-01-0-1Frame groove 14/18 mm G-14750-01-0-1
1 2 1 1 2 Bag of middle lock G.U-oZ WSW according to profile systemFrame groove 10/14 mm G-14751-01-0-1Frame groove 12/15 mm G-14753-01-0-1Frame groove 14/18 mm G-14752-01-0-1
1 2 1 1 2 Bag of middle lock G.U-oZ SSH according to profile systemFrame groove 10/14 mm G-15805-01-0-1Frame groove 12/15 mm G-15807-01-0-1Frame groove 14/18 mm G-15806-01-0-1
1 2 1 1 2 Bag of profiles G.U-968/150 [1]SW600- 850 K-15279-20-0-*851-1100 K-15279-25-0-*
1101-1350 K-15279-30-0-*1351-1600 K-15279-35-0-*
1 2 1 1 2 Bag of additional profiles G.U-oZ [1]SW600- 850 K-14132-20-0-*851-1100 K-14132-25-0-*
1101-1350 K-14132-30-0-*1351-1600 K-14132-35-0-*
2 4 2 2 4 Positioning plate, clampable (acc. to profile)Locking plate (acc. to profile)SW SH
5 6 5 5 5 600-1200 730-12007 8 7 7 7 1201-24007 8 7 7 7 1201-1600 730-12009 10 9 9 9 1201-2400
[1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white[2] • = 1 box with handle position lh, 1 box with handle position rh[3] = Push rod holes with diameter 6.0 mm; optionally available with diameter 5.2 mmNote: Max. sash weight 130 kg
Runner, frontlh 6-29560-00-L-0rh 6-29560-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Countersunk sheetmetal screw 9-13151-38Cover 9-26687-00-0-*
Runner, rearlh 6-29561-00-L-0rh 6-29561-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Spring-loaded buffer6-29565-00-0-*
Control part6-29563-00-0-*
Running rail P 1300
Connecting rod9-25476-**-0-1Support9-38527-00-0-0
Guide6-24764-00-0-0Cover railP 1608
Parallel Slide and Tilt fittings G.U-968/150 oZ
Doors and windows with geared handle inside for sash profiles with Euro-groove 15/20 mm
61
FERCO
Cover rail P 1480End cap 9-34523-00-0-*, gliding rail P 1225
Locking pin element6-24539-00-0-1
Locking pin element6-24539-00-0-1
ScrewNut
Stay arm glider 6-22755-00-0-0Stay arm
Stay arm glider 6-22755-00-0-0Stay arm
End caplh 9-34517-00-L-*rh 9-34517-00-R-*
Cover rail P 1481
End caplh 9-34517-00-L-*rh 9-34517-00-R-*
Corner transmission6-24529-00-0-1
Locking plateAnti-liftingsecurity device6-24792-01-0-1
Locking pinelement6-24539-00-0-1
Fitting requirements according to size of sashes for schemes A to K [4]Quantity Description Article No.A C D G K [2] Handle pos. lh Handle pos. rh1 2• 1 1 2• Box of runners G.U-968/150 K-15278-00-L-0 K-15278-00-R-01 2 1 1 2 Box of adapters G.U-oZ K-14141-02-0-01 2 1 1 2 Handle DIRIGENT-F [1] 6-28072-**-0-*1 2 1 1 2 Rosette PZ inside [1] 6-25224-02-0-*4 8 4 4 8 Countersunk screw M 5 x 35 9-13255-351 2 1 1 2 Mill-in gear, 180° [3] 6-25916-**-0-11 2 1 1 2 Locking element with cylinder bore [3] 6-25918-**-0-11 2 1 1 2 Bag of locking parts G.U-oZ
Frame groove 10/14 mm G-14748-01-0-1Frame groove 12/15 mm G-14749-01-0-1Frame groove 14/18 mm G-14750-01-0-1
1 2 1 1 2 Bag of middle lock G.U-oZ WSW according to profile systemFrame groove 10/14 mm G-14751-01-0-1Frame groove 12/15 mm G-14753-01-0-1Frame groove 14/18 mm G-14752-01-0-1
1 2 1 1 2 Bag of middle lock G.U-oZ SSH according to profile systemFrame groove 10/14 mm G-15805-01-0-1Frame groove 12/15 mm G-15807-01-0-1Frame groove 14/18 mm G-15806-01-0-1
1 2 1 1 2 Bag of profiles G.U-968/150 [1]SW600- 850 K-15279-20-0-*851-1100 K-15279-25-0-*
1101-1350 K-15279-30-0-*1351-1600 K-15279-35-0-*
1 2 1 1 2 Bag of additional profiles G.U-oZ [1]SW600- 850 K-14132-20-0-*851-1100 K-14132-25-0-*
1101-1350 K-14132-30-0-*1351-1600 K-14132-35-0-*
2 4 2 2 4 Positioning plate, clampable (acc. to profile)Locking plate (acc. to profile)SW SH
5 6 5 5 5 600-1200 730-12007 8 7 7 7 1201-24007 8 7 7 7 1201-1600 730-12009 10 9 9 9 1201-2400
[1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white[2] • = 1 box with handle position lh, 1 box with handle position rh[3] ** = Backset 25 to 50 mm[4] = Push rod holes with diameter 6.0 mm; optionally available with diameter 5.2 mmNote: Max. sash weight 130 kg
Locking elementwith cylinder bore
Mill-in gear, 180°
Rosette PZ insideCountersunk screw
Handle DIRIGENT-FCountersunk screw
Corner transmission6-24529-00-0-1
Cover9-32227-01-0-*Spring element6-24791-02-0-0
Corner transmission6-24529-00-0-1
Adapter, rear6-24790-02-0-1
Positioningplate acc.to profile
Positioningplate acc.to profile
Adapter, front6-24789-02-0-1
Locking pin element 6-24539-00-0-1Locking plate acc. to profile
Runner, frontlh 6-29560-00-L-0rh 6-29560-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Countersunk sheetmetal screw 9-13151-38Cover 9-26687-00-0-*
Runner, rearlh 6-29561-00-L-0rh 6-29561-00-R-0End caplh 9-38543-00-L-*rh 9-38543-00-R-*
Spring-loaded buffer6-29565-00-0-*
Control part6-29563-00-0-*
Running rail P 1300
Connecting rod9-25476-**-0-1Support9-38527-00-0-0
Guide6-24764-00-0-0Cover railP 1608
Parallel Slide and Tilt fittings G.U-968/150 oZ
Doors and windows with mill-in gear, lockable, for sash profiles with Euro-groove 15/20 mm
62
FERCO
Parallel Slide and Tilt fittings G.U-968/150 oZ
Application Description Article No. Article No. Assembly drawingAluminium doors Sash profile Frame profile False mullion Locking Positioning 0.43903.1/968/150 oZand windows profile plate plateAlcan Series Contact 4024 F 4002 D 4029 F 1) G-15069-00-0-1 9-29990-24-0-3 F.41949.1
2) G-11800-00-0-1 6-25587-02-0-3Alisol 3 V 66052 V 63215 V 63207 1) G-15059-00-0-1 9-29990-14-0-3 0.41081.2
2) G-11071-00-0-1 6-25587-03-0-3Alsec 2000 Series 59 55829-97 46960-85 52533-73 1) G-15059-00-0-1 9-29990-14-0-3 0.42657.2
2) G-11071-00-0-1 6-25587-03-0-3Alu A.M.C. GN 50 50/430 50/230 1) G-15059-00-0-1 9-29990-14-0-3
2) G-11071-00-0-1 6-25587-03-0-3Bug 90 831 602 831 614 1) G-15067-00-0-1 9-29990-23-0-3 0.42236.2
2) G-11065-00-0-1 6-25587-01-0-3Egybel 901 053 901 010 901 042 1) G-15059-00-0-1* 9-29990-14-0-3
901 080 2) G-11071-00-0-1* 6-25587-03-0-3EurAl Series 65 162 100 161 100 1) G-15059-00-0-1 9-29990-14-0-3
2) G-11071-00-0-1 6-25587-03-0-3Forster (steel profile) 500.700 505.665 9-30147-00-0-3 9-30163-18-0-3 0.41041.1Hueck 2.1 556 200 556 103 6-25071-00-0-3Metra Series 65 265 103 165 130 G-19578-00-0-1 6-25587-03-0-3MKF TKI 602 602-02-022 602-01-015 602-03-002 6-25071-00-0-3Pechiney N 113351 N 113311 N 113320/ 1) G-15067-00-0-1* 9-29990-23-0-3 0.42763.1
N 113352 2) G-11065-00-0-1* 6-25587-01-0-3Pesalu 07001069 04201041 0.42691.2Remi Claeys Ekonal 47332 42003 42531 1) G-15069-00-0-1 9-29990-24-0-3 0.41062.1
2) G-11800-00-0-1 6-25587-02-0-3Reynaers 1) G-15059-00-0-1 9-29990-14-0-3
2) G-11071-00-0-1 6-25587-03-0-3Schüco Royal 64w 108 580 104 610 104 620 9-30146-03-0-3 9-29990-03-0-3 0.42562.1Schüco Royal S 65/55 166 490 166 030 166 070 9-30146-03-0-3 9-29990-32-0-3 0.43290.1Sidal NC 60 S 873 863 878 1) G-15069-00-0-1 9-29990-24-0-3 0.41777.4
2) G-11800-00-0-1 6-25587-02-0-3SMS Series 46000 46 720 46 493 46 511 1) G-15067-00-0-1 9-29990-23-0-3
2) G-11065-00-0-1 6-25587-01-0-3Systemes (F) 1) G-15059-00-0-1 9-29990-14-0-3 0.42578.4
2) G-11071-00-0-1 6-25587-03-0-3Wernal Series 6000 1) G-15059-00-0-1 9-29990-14-0-3 0.40937.4
2) G-11071-00-0-1 6-25587-03-0-3* Locking plate also for false mullion profile1)Locking plate fixed – positioning plate fixed/screw-on version2)Locking plate adjustable – positioning plate fixed/clampableNote:Parallel Slide and Tilt fittings G.U-968/200 mZ, G.U-968/150 mZ and G.U-968/150 oZ are adapted to all profilesystems with Euro-groove 15/20 mm in the sash profile and frame groove 10/14 mm, 12/15 mm or 14/18 mm.
Positioning and locking plates acc. to profile system
Parallel Slide and Tilt fittings G.U-968/200 mZ and G.U-968/150 mZ
Application Description Article No. Article No. Assembly drawingAluminium doors Sash profile Frame profile False mullion Locking Positioning 0.43855.1/968/200 mZand windows profile plate plate 0.43905.1/968/150 mZAkotherm AT 730 2551 2502 6-28734-12-0-1 6-25587-02-0-1 0.43712.4Graute-Therm 80 6-28734-10-0-1 6-25587-01-0-1Hartmann Systherm 72 E 9-30146-05-0-1* 9-29990-05-0-1 0.43827.2Heroal Series 065 9302 9324 6-28734-10-0-1 6-25587-01-0-1Hueck 2.1 or 1.0 6-25071-00-0-1Klauke 78145 78010 G-15059-00-0-1 6-25587-03-0-1 0.43770.4Reynolds RT 67, RT 72 770 145/770 146 770 006/770 090 6-28734-10-0-1 6-25587-01-0-1Schüco Royal S 65Sykon Sykotherm 64 6332 6329 6331 6-28734-10-0-1 6-25587-01-0-1* Locking plate also for false mullion profile
63
FERCO
ApplicationRange of applications for G.U Sliding-Folding fittings:– Sliding-Folding doors with 3 to 7 sashes,– Sliding-Folding windows with 3 to 7 sashes,each with running and gliding rails.
DesignsSliding-Folding fittings G.U-822Bottom running fittings for single sashes up to 80 kg, with 4-wheelcarriages, adjustable for different sash overlap dimensions, heightadjustable + 4 mm or - 1.5 mm. Wheels with PVC-coated ball bearings.SW -1000 mm, SH -2400 mm
Sliding-Folding fittings G.U-825Top running fittings for single sashes up to 80 kg, with 4-wheelcarriages, adjustable for different sash overlap dimensions, heightadjustable + 4 mm or - 1.5 mm. Wheels with PVC-coated ball bearings.SW -1000 mm, SH -2400 mm
HandlesThe geared handles are made of aluminium with concealed fixings.Rosettes with robust retaining feature. An additional wrong operationsafety device is fixed on the handle carrier. Lockable and removablehandles as well as handles with extended carrier fork complete theprogramme.
Running rail P 1213Aluminium running rail, suitable for use with Sliding-Folding sasheswith standard and special fittings.
Gliding rail P 1381Aluminium gliding rail, suitable for use with Sliding-Folding sashes(top guide).
Standard coloursEV 1 Visible aluminium parts anodized in natural colour,
cover profiles greyUC 5 Visible aluminium parts anodized dark bronze,
cover profiles brownWhite Visible aluminium parts anodized in natural colour,
cover profiles white (RAL 9016)
Materials, surface sealing ferGUard* silver andferGUard* yellowThe fitting parts are made of high quality steel, zinc die-casting andaluminium alloys.According to the material they are protected against corrosion by thesurface sealing ferGUard* silver or ferGUard* yellow, aluminium partsare anodized.
AbbreviationsG Fixed gear positionlh left handML Middle lockrh right handSH Sash heightST Sash thicknessSW Sash widthTFW Total frame width
Article NumbersExampleArticle No.6-25334-00-0-*
6-25334- - - Part number- -00- - Size- - -L- Left hand (gear side)- - -R- Right hand (gear side)- - -0- Usable on both sides- - - -1T Nickel silver- - - -1 F 1/EV 1, natural or silver colour, zinc die-casting
parts galvanized and blue bichromated- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass or brass colour, steel
parts galvanized and yellow bichromated- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black, powder-coated (RAL 9005)- - - -7 White, powder-coated (RAL 9016)- - - -7T White, powder-coated (RAL 9010)- - - -8 Stainless steel oder inox colour- - - -* Surface treatment variable (see price-list)
for aluminium doors and windows
Sash arrangement according to schemes 321 to 770
321 330 4312 folding sashes 2 folding sashes 3 folding sashes1 side hung sash [1] 1 side hung sash 1 side hung sash [1]
532 541 5502 folding/1 side hung sash 4 folding sashes 4 folding sashes2 folding sashes 1 side hung sash [1] 1 side hung sash
633 6513 folding sashes 5 folding sashes2 folding/1 side hung sash 1 side hung sash [1]
743 761 7704 folding sashes 6 folding sashes 6 folding sashes2 folding/1 side hung sash 1 side hung sash [1] 1 side hung sash
[1] Active side hung sash also as a tilt-turn sash
Sliding-Folding fittings
64
FERCO
Bag of screw-on blocking lockwith key K-12968-00-0-*
Bag of limiting stay with friction sliderArm length 150 mmFrame groove 10/14 G-12952-10-0-*Frame groove 12/15 G-12952-12-0-*Frame groove 14/18 G-12952-14-0-*
Arm length 250 mmFrame groove 10/14 G-12953-10-0-*Frame groove 12/15 G-12953-12-0-*Frame groove 14/18 G-12953-14-0-*
Bag of concealed blocking lockwithout keyFrame groove 10/14 G-12995-00-0-0Frame groove 12/15 G-12997-00-0-0Frame groove 14/18 G-12996-00-0-0
Key for blocking lock8-00771-00-0-3
Carrier for SH 500-600 mmG-17510-00-0-1
for Sliding-Folding fittings G.U-822 and G.U-825
Optional parts
Bag of door catchK-12962-00-0-1
65
FERCO
Bag of geared handleSPACIO, with fixing screwsG-46551-00-0-*
Optional parts
Geared handles SPACIO for tilt-turn and side hung sashes, accessoriesGeared handles SPACIO, aluminium with lacquer finish1 carrier 22 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handleSPACIO, with fixing screwsand 2 keysG-46553-00-0-*
Bag of geared rosette SPACIO,with fixing screwsG-46555-00-0-*Removable handle SPACIOG-18888-00-0-*
Bag of geared handleSPACIO, with fixing screwsG-46595-00-0-*
Geared handles SPACIO, aluminium with lacquer finish1 carrier 33 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handleSPACIO, with fixing screwsand 2 keysG-46597-00-0-*
Bag of geared rosette SPACIO,with fixing screwsG-46596-00-0-*Removable handle SPACIOG-18888-00-0-*
Bag of geared handle SPACIO,right hand, with fixing screwsG-46552-00-R-*
Geared handles SPACIO, aluminium with lacquer finish2 carriers 22 mmnon lockable lockable Geared rosette, removable handle
Bag of geared handleSPACIO, right hand, withfixing screws and 2 keysG-46554-00-R-*
Bag of geared rosette SPACIO,right hand, with fixing screwsG-46556-00-R-*Removable handle SPACIOG-18888-00-0-*
Bag of accessories forconversion of handlesonly delivered righthand into left handG-46550-00-L-1
66
FERCOOptional parts
Handle DIRIGENT-Fwithout spindle6-28072-00-0-*
Handle DIRIGENT-F/AFoutside, flat6-25223-00-0-*
Handle DIRIGENT-Fwithout spindle6-28072-00-0-*
Handle DIRIGENT-F/Aoutside6-25993-00-0-*
Bags of handles DIRIGENT-F
Rosette/Finside, flat6-24913-00-0-*
Removable handleDIRIGENT-F/SGSpindle 338-00694-33-0-*
DIRIGENT-F/Zwith push-buttoncylinder, all keys alikeSpindle 296-28075-29-0-*
DIRIGENT-FSpindle 296-28072-29-0-*
DIRIGENT-Fwithout spindle6-28072-00-0-*
DIRIGENT-F/AFoutside, flat6-25223-00-0-*
DIRIGENT-F/Aoutside6-25993-00-0-*
Pull handle,outside9-22921-00-0-*
Mill-in gear, 180°Backset 25-50 mm6-25916-**-0-1
Locking elementwith cylinder boreBackset 25-50 mm6-25918-**-0-1
Inside operationCountersunk screwM 5 x 35 9-13255-35
In- and outside operationCountersunk screw M 5ST 51-60 9-13255-60ST 61-70 9-13255-70ST 71-80 9-13255-80
Rosette insidewith cylinder bore6-25224-02-0-*
Rosette outsidewith cylinder bore9-32407-02-0-*
SpindleST 56-689-26874-56-0-1ST 69-809-26874-69-0-1
Rosette insidewith cylinder bore6-25224-02-0-*
Spindle9-26874-56-0-1
Bag of handlesDIRIGENT-F/AF, DIRIGENT-FK-14775-70-0-*
Rosette outsidewith cylinder bore9-32407-02-0-*
Countersunk screw M 5 x 709-13255-70
Rosette insidewith cylinder bore6-25224-02-0-*
Spindle9-26874-56-0-1
Bag of handlesDIRIGENT-F/A, DIRIGENT-FK-14776-70-0-*
Rosette outsidewith cylinder bore9-32407-02-0-*
Countersunk screw M 5 x 709-13255-70
Handles DIRIGENT-F for mill-in gears
Mill-in gear, 180°with wrong operationsafety deviceBackset 25-50 mm6-25917-**-0-1
Mill-in gear, 90°Backset 25-50 mm6-25948-**-0-1
Mill-in gear, 180°with wrong operationsafety deviceBackset 14 mm6-30534-00-0-1
Mill-in gear, 180°without wrong operationsafety deviceBackset 14 mm6-31280-00-0-1
67
FERCO
Assembly dimensions for frame and sash
Drilling and millingdimensions formill-in gears6-25916-**-0-16-25917-**-0-16-25948-**-0-1
1520 > 2
5
21
3 = Thickness of corner hinge JET AK 8
SW / SH
Product information
22
** Available backsets: 25 - 35 - 40 - 45 - 50 mm
Drilling and millingdimensions forlocking elementwith cylinder bore6-25918-**-0-1
Drilling and milling dimensions, assembly dimensions
Back-set+ 11
Drilling and millingdimensions formill-in gearBackset 14 mmwith wrong operationsafety device6-30534-00-0-1without wrong operationsafety device6-31280-00-0-1
G =
han
dle
posi
tion
68
FERCO
Locking and supporting plates according to frame groove
10/14 mm
14 10
12/15 mm12 15
14/18 mm
18 14
Frame groove
Tilt-locking plate G-14696-00-0-1 G-14698-00-0-1 G-14700-00-0-1Double sash tilt-turn
Supporting plate A-02820-00-0-0 G-11798-00-0-0 G-11073-00-0-0Double sash tilt-turn
Locking plate G-15067-00-0-1 G-15069-00-0-1 G-15059-00-0-1fixedLocking plate G-11065-00-0-1 G-11800-00-0-1 G-11071-00-0-1adjustable
Locking plate G-11774-00-0-1 G-12022-00-0-1 G-11776-00-0-1for shoot
Profile systems BUG 90DoralHeroal Series 40Kubal 2000PechineyReynolds RT 620SMS 15000Sykon
AkothermAlcan Serie ContactRemi Claeys Ekonal i 70Remi Claeys Ekonal i 60
EgybelEurAl Series 65InespalPhilippi 2000Redal 64SapaVAW 75 E
Product information
69
FERCO
Folding, inactive, side hung and tilt-turn sashesDrilling dimension for stay arm, shortening dimensions for push rods, width of sash overlap 22 mm
Stay arm size 30: L = SW – 95Stay arm size 50: L = SW – 535 6
Stay arm size 30: = 192Stay arm size 50: = 363Side hung sash hinge: = 120(to axis)
Push rod and drilling dimension for tilt-turn stay arms
Side hung sash: L = SW/2 – 91Inactive sash: L = SW/2 – 247
Push rod for side hung and inactive sash, locking at top
Sash typeFolding sash: L = SH – G – 173Inactive sash without ML: L = SH – GIA – 132Side hung sash without ML: L = SH – G – 173Tilt-turn sash: L = SH – G – 265
Push rod for folding, inactive, side hungand tilt-turn sash, at top of gear side
Sash typeFolding sash: L = G – 173Inactive sash without ML: L = GIA – 132Side hung sash without ML: L = G – 173Tilt-turn sash: L = G – 265
Push rod for folding, inactive, side hungand tilt-turn sash, at bottom of gear side
Tilt-turn sash: L = SH/2 – 183
Push rod for tilt-turn sash,locking on hinge side
Tilt-turn sash: L = 60Side hung sash: L = 60
Push rod for tilt-turn and side hung sash,locking at bottom
AbbreviationsG Gear position for standard sashGIA Gear position for inactive sashML Middle lockSH Sash heightSW Sash width
Product information
CornertransmissionLocking plateacc. to frame groove
Cover profile P 1226
Corner transmissionLocking plateacc. to frame groove
Running rail P 1213
CarrierLocking plateacc. to frame groove
Gliding rail P 1381 End cap 9-32532-00-0-*
Folding catch Packing
Cover
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Gliding roller6-25336-00-0-3
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Runner 6-25334-00-0-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
70
FERCO
Fitting requirements according to total frame widthand sash height for schemes 321 and 330Quantity Description Article No.321 330
1 1 Basic box G.U-822 K-13861-08-0-*1 2 Box of sash hinges (acc. to profile)1 2 Bag of hinge covers (acc. to profile)6 3 Bag of Axial hinges 105 mm G-46731-00-0-*
1 Bag of folding catch K-13334-00-0-*1 Packing for folding catch 9-33492-00-0-*
2 2 Bag of geared handleDIRIGENT G-45978-00-0-*Locking parts for folding sash
2 2 Corner transmission 6-26235-00-0-11 1 Carrier 6-24528-00-0-12 2 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 Corner transmission 6-26235-00-0-11 1 Carrier 6-24528-00-0-13 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 Basic box JET AS 130 G-46183-01-0-*1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 Wrong operation safety device 6-24672-10-0-*1 1 Bag of profiles G.U-822
TFW [2]-2960 K-13206-30-0-*
2961-3960 K-13206-40-0-*[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-822, inward opening
3 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
FERCO
CornertransmissionLocking plateacc. to frame groove
Cover profile P 1226
Corner transmissionLocking plateacc. to frame groove
Running rail P 1213
CarrierLocking plateacc. to frame groove
Gliding rail P 1381 End cap 9-32532-00-0-*
Folding catch Packing
Cover
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Gliding roller6-25336-00-0-3
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Runner 6-25334-00-0-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
71
Fitting requirements according to total frame widthand sash height for schemes 532, 541 and 550Quantity Description Article No.532 541 550
2 2 2 Basic box G.U-822 K-13861-08-0-*3 3 4 Box of sash hinges (acc. to profile)3 3 4 Bag of hinge covers (acc. to profile)6 6 3 Bag of Axial hinges 105 mm G-46731-00-0-*1 1 Bag of folding catch K-13334-00-0-*1 1 Packing for folding catch 9-33492-00-0-*3 3 3 Bag of geared handle
DIRIGENT G-45978-00-0-*Locking parts for folding sash
4 4 4 Corner transmission 6-26235-00-0-12 2 2 Carrier 6-24528-00-0-14 4 4 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 2 Corner transmission 6-26235-00-0-11 1 1 Carrier 6-24528-00-0-13 3 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 Basic box JET AS 130 G-46183-01-0-*1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 Wrong operation safety device 6-24672-10-0-*1 1 1 Bag of profiles G.U-822
TFW [2]-2960 K-13206-30-0-*
2961-3960 K-13206-40-0-*3961-5000 K-13206-50-0-*5001-6700 K-13206-67-0-*
[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-822, inward opening
5 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
CornertransmissionLocking plateacc. to frame groove
Cover profile P 1226
Corner transmissionLocking plateacc. to frame groove
Running rail P 1213
CarrierLocking plateacc. to frame groove
Gliding rail P 1381 End cap 9-32532-00-0-*
Folding catch Packing
Cover
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Gliding roller6-25336-00-0-3
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Runner 6-25334-00-0-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
72
FERCO
Fitting requirements according to total frame widthand sash height for schemes 431, 633 and 651Quantity Description Article No.431 633 651
1 2 2 Basic box G.U-822 K-13861-08-0-*2 4 4 Box of sash hinges (acc. to profile)2 4 4 Bag of hinge covers (acc. to profile)6 6 6 Bag of Axial hinges 105 mm G-46731-00-0-*1 2 1 Bag of folding catch K-13334-00-0-*1 2 1 Packing for folding catch 9-33492-00-0-*2 3 3 Bag of geared handle
DIRIGENT G-45978-00-0-*Locking parts for folding sash
2 4 4 Corner transmission 6-26235-00-0-11 2 2 Carrier 6-24528-00-0-12 4 4 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 2 Corner transmission 6-26235-00-0-11 1 1 Carrier 6-24528-00-0-13 3 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for inactive sash
1 1 1 Bag of locking parts SF G-45929-30-0-11 1 1 Bag of locking plate SF
10/14 - Frame groove 10/14 mm G-45939-10-0-112/15 - Frame groove 12/15 mm G-45939-12-0-114/18 - Frame groove 14/18 mm G-45939-14-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 1 Basic box JET AS 130 G-46183-01-0-*1 1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 1 Wrong operation safety device 6-24672-10-0-*1 1 1 Bag of profiles G.U-822
TFW [2]-2960 K-13206-30-0-*
2961-3960 K-13206-40-0-*3961-5000 K-13206-50-0-*5001-6700 K-13206-67-0-*
[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-822, inward opening
4 and 6 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
FERCO
CornertransmissionLocking plateacc. to frame groove
Cover profile P 1226
Corner transmissionLocking plateacc. to frame groove
Running rail P 1213
CarrierLocking plateacc. to frame groove
Gliding rail P 1381 End cap 9-32532-00-0-*
Folding catch Packing
Cover
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Gliding roller6-25336-00-0-3
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Runner 6-25334-00-0-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
73
Fitting requirements according to total frame widthand sash height for schemes 743, 761 and 770Quantity Description Article No.743 761 770
3 3 3 Basic box G.U-822 K-13861-08-0-*5 5 6 Box of sash hinges (acc. to profile)5 5 6 Bag of hinge covers (acc. to profile)6 6 3 Bag of Axial hinges 105 mm G-46731-00-0-*1 1 Bag of folding catch K-13334-00-0-*
1 Packing for folding catch 9-33492-00-0-*4 4 4 Bag of geared handle
DIRIGENT G-45978-00-0-*Locking parts for folding catch
6 6 6 Corner transmission 6-26235-00-0-13 3 3 Carrier 6-24528-00-0-16 6 6 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 2 Corner transmission 6-26235-00-0-11 1 1 Carrier 6-24528-00-0-13 3 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 Basic box JET AS 130 G-46183-01-0-*1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 Wrong operation safety device 6-24672-10-0-*1 1 1 Bag of profiles G.U-822
TFW [2]-2960 K-13206-30-0-*
2961-3960 K-13206-40-0-*3961-5000 K-13206-50-0-*5001-6700 K-13206-67-0-*
[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-822, inward opening
7 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
CornertransmissionLocking plateacc. to frame groove
Corner transmissionLocking plateacc. to frame groove
CarrierLocking plateacc. to frame groove
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Cover profile P 1226Gliding rail P 1381
Gliding roller 6-25336-00-0-3Folding catch Packing
Running rail P 1213
End cap lh9-32740-00-L-*
Cover profile P 1391Support 9-32741
End cap rh9-32740-00-R-*
Runner 6-25436-00-0-*
Cover
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
74
FERCO
Fitting requirements according to total frame widthand sash height for schemes 321 and 330Quantity Description Article No.321 330
1 1 Basic box G.U-825 K-13982-08-0-*1 2 Box of sash hinges (acc. to profile)1 2 Bag of hinge covers (acc. to profile)6 3 Bag of Axial hinges 105 mm G-46731-00-0-*
1 Bag of folding catch K-13334-00-0-*1 Packing for folding catch 9-33492-00-0-*
2 2 Bag of geared handleDIRIGENT G-45978-00-0-*Locking parts for folding sash
2 2 Corner transmission 6-26235-00-0-11 1 Carrier 6-24528-00-0-12 2 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 Corner transmission 6-26235-00-0-11 1 Carrier 6-24528-00-0-13 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 Basic box JET AS 130 G-46183-01-0-*1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 Wrong operation safety device 6-24672-10-0-*1 1 Bag of profiles G.U-825
TFW [2]-2960 K-13272-30-0-*
2961-3960 K-13272-40-0-*[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-825, inward opening
3 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
75
FERCO
CornertransmissionLocking plateacc. to frame groove
Corner transmissionLocking plateacc. to frame groove
CarrierLocking plateacc. to frame groove
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Cover profile P 1226Gliding rail P 1381
Gliding roller 6-25336-00-0-3Folding catch Packing
Running rail P 1213
End cap lh9-32740-00-L-*
Cover profile P 1391Support 9-32741
End cap rh9-32740-00-R-*
Runner 6-25436-00-0-*
Cover
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
Fitting requirements according to total frame widthand sash height for schemes 532, 541 and 550Quantity Description Article No.532 541 550
2 2 2 Basic box G.U-825 K-13982-08-0-*3 3 4 Box of sash hinges (acc. to profile)3 3 4 Bag of hinge covers (acc. to profile)6 6 3 Bag of Axial hinges 105 mm G-46731-00-0-*1 1 Bag of folding catch K-13334-00-0-*1 1 Packing for folding catch 9-33492-00-0-*3 3 3 Bag of geared handle
DIRIGENT G-45978-00-0-*Locking parts for folding sash
4 4 4 Corner transmission 6-26235-00-0-12 2 2 Carrier 6-24528-00-0-14 4 4 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 2 Corner transmission 6-26235-00-0-11 1 1 Carrier 6-24528-00-0-13 3 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 Basic box JET AS 130 G-46183-01-0-*1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 Wrong operation safety device 6-24672-10-0-*1 1 1 Bag of profiles G.U-825
TFW [2]-2960 K-13272-30-0-*
2961-3960 K-13272-40-0-*3961-5000 K-13272-50-0-*5001-6700 K-13272-67-0-*
[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-825, inward opening
5 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
CornertransmissionLocking plateacc. to frame groove
Corner transmissionLocking plateacc. to frame groove
CarrierLocking plateacc. to frame groove
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Cover profile P 1226Gliding rail P 1381
Gliding roller 6-25336-00-0-3Folding catch Packing
Running rail P 1213
End cap lh9-32740-00-L-*
Cover profile P 1391Support 9-32741
End cap rh9-32740-00-R-*
Runner 6-25436-00-0-*
Cover
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
76
FERCO
Fitting requirements according to total frame widthand sash height for schemes 431, 633 and 651Quantity Description Article No.431 633 651
1 2 2 Basic box G.U-825 K-13982-08-0-*2 4 4 Box of sash hinges (acc. to profile)2 4 4 Bag of hinge covers (acc. to profile)6 6 6 Bag of Axial hinges 105 mm G-46731-00-0-*1 2 1 Bag of folding catch K-13334-00-0-*1 2 1 Packing for folding catch 9-33492-00-0-*2 3 3 Bag of geared handle
DIRIGENT G-45978-00-0-*Locking parts for folding sash
2 4 4 Corner transmission 6-26235-00-0-11 2 2 Carrier 6-24528-00-0-12 4 4 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 2 Corner transmission 6-26235-00-0-11 1 1 Carrier 6-24528-00-0-13 3 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for inactive sash
1 1 1 Bag of locking parts SF G-45929-30-0-11 1 1 Bag of locking plate SF
10/14 - Frame groove 10/14 mm G-45939-10-0-112/15 - Frame groove 12/15 mm G-45939-12-0-114/18 - Frame groove 14/18 mm G-45939-14-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 1 Basic box JET AS 130 G-46183-01-0-*1 1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 1 Wrong operation safety device 6-24672-10-0-*1 1 1 Bag of profiles G.U-825
TFW [2]-2960 K-13272-30-0-*
2961-3960 K-13272-40-0-*3961-5000 K-13272-50-0-*5001-6700 K-13272-67-0-*
[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-825, inward opening
4 and 6 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
77
FERCO
CornertransmissionLocking plateacc. to frame groove
Corner transmissionLocking plateacc. to frame groove
CarrierLocking plateacc. to frame groove
Axial hinge105 mm
Geared handle6-24559-00-0-*Cylinder head screw9-13354-12
Cover profile P 1226Gliding rail P 1381
Gliding roller 6-25336-00-0-3Folding catch Packing
Running rail P 1213
End cap lh9-32740-00-L-*
Cover profile P 1391Support 9-32741
End cap rh9-32740-00-R-*
Runner 6-25436-00-0-*
Cover
Support 9-33628-08Corner bearing 9-33448-00-R-3Cover 9-33449-00-R-*
Sash hinge
Corner bearing 9-33448-00-L-3Cover 9-33449-00-L-*Support 9-33628-08
Fitting requirements according to total frame widthand sash height for schemes 743, 761 and 770Quantity Description Article No.743 761 770
3 3 3 Basic box G.U-825 K-13982-08-0-*5 5 6 Box of sash hinges (acc. to profile)5 5 6 Bag of hinge covers (acc. to profile)6 6 3 Bag of Axial hinges 105 mm G-46731-00-0-*1 1 Bag of folding catch K-13334-00-0-*
1 Packing for folding catch 9-33492-00-0-*4 4 4 Bag of geared handle
DIRIGENT G-45978-00-0-*Locking parts for folding sash
6 6 6 Corner transmission 6-26235-00-0-13 3 3 Carrier 6-24528-00-0-16 6 6 Locking plate, fixed
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1Locking parts for side hung sash
2 2 2 Corner transmission 6-26235-00-0-11 1 1 Carrier 6-24528-00-0-13 3 3 Locking plate
10/14 - Frame groove 10/14 mm G-15067-00-0-112/15 - Frame groove 12/15 mm G-15069-00-0-114/18 - Frame groove 14/18 mm G-15059-00-0-1alternatively instead of side hung sash:Tilt-turn fittings [1]
1 Basic box JET AS 130 G-46183-01-0-*1 Bag of tilt-turn locking parts
10/14-2 - Frame groove 10/14 mm G-46178-01-0-112/15-2 - Frame groove 12/15 mm G-46179-01-0-114/18-2 - Frame groove 14/18 mm G-46180-01-0-1
1 Box of stay arm JET ASSW Size ML355- 600 30 K-12685-00-4-1601-1000 50 1 K-12686-00-4-1
1 Bag of tilt-turn middle lock10/14 - Frame groove 10/14 mm K-12691-01-0-112/15 - Frame groove 12/15 mm K-12693-01-0-114/18 - Frame groove 14/18 mm K-12692-01-0-1
2 Bag of locking pin/locking plate10/14 - Frame groove 10/14 mm G-11349-00-0-112/15 - Frame groove 12/15 mm G-11350-00-0-114/18 - Frame groove 14/18 mm G-11812-00-0-1
1 Wrong operation safety device 6-24672-10-0-*1 1 1 Bag of profiles G.U-825
TFW [2]-2960 K-13272-30-0-*
2961-3960 K-13272-40-0-*3961-5000 K-13272-50-0-*5001-6700 K-13272-67-0-*
[1] In case of a tilt-turn active sash 3 Axial hinges are suppressed[2] Max. sash width SW 1000 mm* 1 = Surface EV 1 or EV 1 colour* 5 = Surface UC 5 or UC 5 colour* 7 = Surface white (RAL 9016)G = Centre of geared handle
Sliding-Folding fittings G.U-825, inward opening
7 sashes with side hung sash locking mechanism, for sash profiles with Euro-groove 15/20 mm
78
FERCOLocking parts according to profile system
Sliding-Folding fittings G.U-822 and G.U-825
Application Description PU Article No.Windows and doors Sash hinges, Axial hinges, locking plates,
middle locks, locking pin plates,tilt-locking plates, packings
Akotherm – G.U-922 inward Box of sash hinges 17/45 1 K-13205-03-0-3Frame profile 1503 Bag of hinge covers 1 K-15392-00-0-*Sash profile 1549 Locking plate for frame and false mullion profile 100 6-25495-00-0-1False mullion profile 1508 Locking plate for shoot 100 E-15616-00-0-3T profile 1511 Mushroom pin locking plate 100 8-00979-00-0-3
Packing for locking plate 8-00979-00-0-3 100 9-30080-00-0-3Alcan Contact – G.U-822 inward Box of sash hinges 17/40 1 K-13205-01-0-3
Frame profile 4002 D Bag of hinge covers 1 K-15392-00-0-*Sash profile 4024 F Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile 4029 F Locking plate, fixed, for folding sash 100 G-15069-00-0-1Frame groove 12/15 Locking plate, fixed, for side hung sash 100 G-15069-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12693-01-0-1Bag of tilt-turn locking parts 10 G-46179-01-0-1Bag of locking pin/locking plate 10 G-11350-00-0-1Bag of locking plate SF 10 G-45939-12-0-1
Alcan Contact – G.U-825 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile 4002 D, 4043 M Bag of hinge covers 1 K-15392-00-0-*Sash profile 4024 F Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile 4029 F Locking plate, fixed, for folding sash 100 G-15069-00-0-1Frame groove 12/15 Locking plate, fixed, for side hung sash 100 G-15069-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12693-01-0-1Bag of tilt-turn locking parts 10 G-46179-01-0-1Bag of locking pin/locking plate 10 G-11350-00-0-1Bag of locking plate SF 10 G-45939-12-0-1
Alsec Series 59 – G.U-822 inward Box of sash hinges 25/45 1 K-13812-00-0-3Frame profile 53194-80 Bag of hinge covers 1 K-15399-00-0-*Sash profile 56556-92 Locking plate for frame and false mullion profile 100 9-30146-13-0-3False mullion profile 53198-97 Locking plate for shoot 100 8-00668-15-0-3
Mushroom pin locking plate 100 8-00979-00-0-3Packing for locking plate 8-00979-00-0-3 100 9-30080-00-0-3
Remi Claeys Ekonal i70 – Box of sash hinges 17/40 1 K-13205-01-0-3G.U-822 inward Bag of hinge covers 1 K-15392-00-0-*
Frame profile 42004 Bag of Axial hinges 105 mm 10 G-46519-00-0-*Sash profile 42330 Locking plate, fixed, for folding sash 100 G-15069-00-0-1T profile 42331 Locking plate, fixed, for side hung sash 100 G-15069-00-0-1Frame groove 12/15 Tilt-turn active sash:
Bag of tilt-turn middle lock 10 K-12693-01-0-1Bag of tilt-turn locking parts 10 G-46179-01-0-1Bag of locking pin/locking plate 10 G-11350-00-0-1Bag of locking plate SF 10 G-45939-12-0-1
Remi Claeys Ekonal i70 – Box of sash hinges 17/40 1 K-13205-01-0-3G.U-825 inward Bag of hinge covers 1 K-15392-00-0-*
Frame profile 42004 i70, 42807 i70 Bag of Axial hinges 105 mm 10 G-46519-00-0-*Sash profile 42330 i70 Locking plate, fixed, for folding sash 100 G-15069-00-0-1T profile 42331 i70 Locking plate, fixed, for side hung sash 100 G-15069-00-0-1Frame groove 12/15 Tilt-turn active sash:
Bag of tilt-turn middle lock 10 K-12693-01-0-1Bag of tilt-turn locking parts 10 G-46179-01-0-1Bag of locking pin/locking plate 10 G-11350-00-0-1Bag of locking plate SF 10 G-45939-12-0-1
Eural Series 65 – G.U-822 inward Box of sash hinges 17/45 1 K-13205-03-0-3Frame profile 161 100 Bag of hinge covers 1 K-15392-00-0-*Sash profile 162 100 Bag of Axial hinges 105 mm 10 G-46519-00-0-*T profile 165 100 Locking plate, fixed, for folding sash 100 G-15059-00-0-1Frame groove 14/18 Locking plate, fixed, for side hung sash 100 G-15059-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12692-01-0-1Bag of tilt-turn locking parts 10 G-46180-01-0-1Bag of locking pin/locking plate 10 G-11812-00-0-1Bag of locking plate SF 10 G-45939-14-0-1
Hartmann Systherm 62 – G.U-822 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile 62 020 0 Bag of hinge covers 1 K-15392-00-0-*Sash profile 62 301 0False mullion profile 62 323 0
Heroal Series 040 – G.U-822 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile 6422 Bag of hinge covers 1 K-15392-00-0-*Sash profile 6402 Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile 6403 Locking plate, fixed, for folding sash 100 G-15067-00-0-1Frame groove 10/14 Locking plate, fixed, for side hung sash 100 G-15067-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12691-01-0-1Bag of tilt-turn locking parts 10 G-46178-01-0-1Bag of locking pin/locking plate 10 G-11349-00-0-1Bag of locking plate SF 10 G-45939-10-0-1
79
FERCO
Sliding-Folding fittings G.U-822 and G.U-825
Application Description PU Article No.Windows and doors Sash hinges, Axial hinges, locking plates,
middle locks, locking pin plates,tilt-locking plates, packings
MKF Series TKI 602 – G.U-822 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile 602-01-015 Bag of hinge covers 1 K-15392-00-0-*Sash profile 602-02-022False mullion profile 602-02-026
MKF Series TKI 602 – G.U-825 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile 602-01-015 Bag of hinge covers 1 K-15392-00-0-*Sash profile 602-02-022False mullion profile 602-02-026
Pechiney – G.U-822 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile N 113 311 Bag of hinge covers 1 K-15392-00-0-*Sash profile N 113 351 Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile N 113 352 Locking plate, fixed, for folding sash 100 G-15067-00-0-1Frame groove 10/14 Locking plate, fixed, for side hung sash 100 G-15067-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12691-01-0-1Bag of tilt-turn locking parts 10 G-46178-01-0-1Bag of locking pin/locking plate 10 G-11349-00-0-1Bag of locking plate SF 10 G-45939-10-0-1
Pechiney – G.U-825 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile N 113 311 Bag of hinge covers 1 K-15392-00-0-*Sash profile N 113 351 Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile N 113 352 Locking plate, fixed, for folding sash 100 G-15067-00-0-1Frame groove 10/14 Locking plate, fixed, for side hung sash 100 G-15067-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12691-01-0-1Bag of tilt-turn locking parts 10 G-46178-01-0-1Bag of locking pin/locking plate 10 G-11349-00-0-1Bag of locking plate SF 10 G-45939-10-0-1
Reynolds RT 620 – G.U-822 inward Box of sash hinges 17/45 1 K-13205-03-0-3Frame profile 717 834 Bag of hinge covers 1 K-15392-00-0-*Sash profile 734 077 Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile 717 876 Locking plate, fixed, for folding sash 100 G-15067-00-0-1Frame groove 10/14 Locking plate, fixed, for side hung sash 100 G-15067-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12691-01-0-1Bag of tilt-turn locking parts 10 G-46178-01-0-1Bag of locking pin/locking plate 10 G-11349-00-0-1Bag of locking plate SF 10 G-45939-10-0-1
Reynolds RT 620 – G.U-825 inward Box of sash hinges 17/45 1 K-13205-03-0-3Frame profile 717 834, 717 839 Bag of hinge covers 1 K-15392-00-0-*Sash profile 734 077 Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile 717 876 Locking plate, fixed, for folding sash 100 G-15067-00-0-1Frame groove 10/14 Locking plate, fixed, for side hung sash 100 G-15067-00-0-1
Tilt-turn active sash:Bag of tilt-turn middle lock 10 K-12691-01-0-1Bag of tilt-turn locking parts 10 G-46178-01-0-1Bag of locking pin/locking plate 10 G-11349-00-0-1Bag of locking plate SF 10 G-45939-10-0-1
Sykon – G.U-822 inward Box of sash hinges 17/40 1 K-13205-01-0-3Frame profile 5330 Bag of hinge covers 1 K-15392-00-0-*Sash profile 5332 Bag of Axial hinges 105 mm 10 G-46519-00-0-*False mullion profile 5338Frame groove 10/14
Locking parts according to profile system
Application Description Article No.G.U-822, G.U-825 Aluminium doors and windows
Drilling jig for corner bearing 6-25831-01-0-0Drilling jig for sash hinge 17/40 (K-13205-01) 6-25369-00-0-0Drilling jig for sash hinge 17/45 (K-13205-03) 6-25996-03-0-0Drilling jig for sash hinge 25/45 (K-13812-00) 6-25996-02-0-0Drilling jig for sash hinge 17/17 (K-13813-00) 6-25996-01-0-0Rod for drilling jig 6-25369 9-32596-00-0-0Stop for rod 9-32596 6-25371-00-0-0Drilling jig for running and gliding rail 6-23616-00-0-0Drilling jig for folding catch and support 6-25575-00-0-0Drilling jig for mill-in gear 6-26191-00-0-0Drilling jig JET AS 130 with clamping device 6-25373-01-0-0Drilling jig for stay arm assembly 6-25410-00-0-0
Drilling jigs
80
FERCO
ApplicationRange of applications for G.U Lift-Sliding fittings:– Lift-Sliding doors with 2 to 4 sashes– Lift-Sliding windows with 2 to 4 sashes
Range of applications for G.U Lift-Tilt-Sliding fittings:– Lift-Tilt-Sliding doors with 2 sashes– Lift-Tilt-Sliding windows with 2 sashes
DesignsLift-Sliding fittings G.U-933Fittings for single sashes up to 250 kg, with 4-wheel carriages andclamp fixed connecting bar. Wheels made of fabric reinforced lami-nated plastic with needle bearing. Lift-locking gear with 37.5 mmbackset and cylinder bore.
Lift-Tilt-Sliding fittings G.U-953Fittings for single sashes up to 250 kg, with 4-wheel carriages andclamp fixed connecting bar. Wheels made of fabric reinforced lami-nated plastic with needle bearing. Lift-locking gear with 37.5 mmbackset and cylinder bore.The stay arms with adjustable pressure can be easily disconnected.
HandlesThe DIRIGENT handles are made of aluminium with concealedfixings. Rosettes with robust retaining feature. Standard version:handles without cylinder bore. Handles with cylinder bore, handlesfor operation on both sides with cylinder bore and removable handlescomplete the programme.
Standard coloursLift-Sliding and Lift-Tilt-Sliding fittings are supplied in the followingstandard colours:EV 1 Visible aluminium parts anodized EV 1UC 5 Visible aluminium parts anodized dark bronze
Materials, surface sealing ferGUard* silver andferGUard* yellowThe fitting parts are made of high quality steel, zinc die-casting andaluminium alloys.According to the material they are protected against corrosion by thesurface sealing ferGUard* silver or ferGUard* yellow, aluminium partsare anodized.
AbbreviationsG Fixed gear positionlh left handPU Packing unitrh right handSH Sash heightST Sash thicknessSW Sash widthTFW Total frame width
Article NumbersExampleArticle No.6-22944-20-0-3
6-22944- - - Part number- -20- - Size- - -L- Left hand (gear side)- - -R- Right hand (gear side)- - -0- Usable on both sides- - - -1T Nickel silver- - - -1 F 1/EV 1, natural or silver colour, zinc die-casting
parts galvanized and blue bichromated- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass or brass colour, steel
parts galvanized and yellow bichromated- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black, powder-coated (RAL 9005)- - - -7 White, powder-coated (RAL 9016)- - - -7T White, powder-coated (RAL 9010)- - - -8 Stainless steel oder inox colour- - - -* Surface treatment variable (see price-list)
for aluminium doors and windows
ApplicationProfile system Sash arrangement Fittings Profile series Top guide Standard
acc. to scheme [1] assemblyA C D F G H drawing
Akotherm • • • • • • G.U-933 System 0.39431.1Alcan • • • • • • G.U-933 Series PA 65 System 0.38297.1Alisol 3 • • • • • • G.U-933 SystemBrökelmann • • • • • • G.U-933 Series WG System BrökelmannHeroal • • • • • G.U-933 Series 40 System 0.42681.1Parsal • • • • • G.U-933 SystemRemi Claeys • • • • • • G.U-933 Ekonal iS 60 System 0.38215.1System Ekonal • G.U-953 Ekonal iS 60 System 0.38219.1Reynolds • • • • • • G.U-933 Series RT 135 System 0.41717.1TKI • • • • • • G.U-933 Series 130 SystemVAW • G.U-933 System VAW[1] The schemes A and C are represented in the following pages. Schemes D, F, G and H upon request.
Sash arrangement according to schemes A to H [1]
A C G
D F H
Sliding sash
Fixed sash
[1] The schemes A and C are represented in the following pages. Schemes D, F, G and H upon request.
Lift-Sliding and Lift-Tilt-Sliding fittings
81
FERCO
Handles DIRIGENT – aluminium
Lift-Sliding fittingsHandle inside – G.U-933DIRIGENT without cylinder boreSpindle 80 mm, single6-24608-00-0-*
Lift-Tilt-Sliding fittingsHandle inside – G.U-953DIRIGENT without cylinder boreSpindle 80 mm, single6-24613-00-0-*
Flush pull9-29526-00-0-*
Lift-Sliding fittingsHandle on both sides – G.U-933DIRIGENT with cylinder boreSpindle 145 mm, single6-24615-96-0-*
Lift-Tilt-Sliding fittingsHandle on both sides – G.U-953DIRIGENT with cylinder boreSpindle 145 mm, single6-24616-96-0-*
Countersunk screw M 6 x 1009-32789-10
Handles DIRIGENT – polished brass Security handlesDIRIGENT Se
Lift-Sliding fittingsHandle on both sides – G.U-933DIRIGENT with cylinder boreSpindle 145 mm, single6-26731-00-0-3
Lift-Tilt-Sliding fittingsHandle on both sides – G.U-953DIRIGENT with cylinder boreSpindle 145 mm, single6-26732-00-0-3
Lift-Sliding fittingsHandle on both sides – G.U-933DIRIGENT Se with cylinder boreSpindle 145 mm, single6-24617-96-0-*
Lift-Tilt-Sliding fittingsHandle on both sides – G.U-953DIRIGENT Se with cylinder boreSpindle 145 mm, single6-24618-96-0-*
Flush pull Se9-29622-00-0-*
Lift-Sliding fittingsHandle inside – G.U-933DIRIGENT with cylinder boreSpindle 80 mm, single6-26728-02-0-3
Lift-Tilt-Sliding fittingsHandle inside – G.U-953DIRIGENT with cylinder boreSpindle 80 mm, single6-26729-02-0-3
Flush pull9-34957-00-0-3
Lift-Sliding fittingsHandle inside – G.U-933DIRIGENT without cylinder boreSpindle 80 mm, single6-26728-01-0-3
Lift-Tilt-Sliding fittingsHandle inside – G.U-953DIRIGENT without cylinder boreSpindle 80 mm, single6-26729-01-0-3
Flush pull9-34957-00-0-3
Lift-Sliding fittingsHandle inside – G.U-933DIRIGENT with cylinder boreSpindle 80 mm, single6-24609-00-0-*
Lift-Tilt-Sliding fittingsHandle inside – G.U-953DIRIGENT with cylinder boreSpindle 80 mm, single6-24614-00-0-*
Flush pull9-29526-00-0-*
Optional parts
Handles for doors and windows, accessories
82
FERCO
Lift-Sliding fittings G.U-933, Lift-Tilt-Sliding fittings G.U-953
RemovablehandleDIRIGENT6-24619-00-0-*
Rosette insidewithout cylinder bore6-23243-01-0-*
Rosette insidewith cylinder bore6-23243-02-0-*
Flush pull9-29526-00-0*
Dummy plateoutside9-29527-00-0-*
Countersunk screwM 6ST mmM 6x65 9-13274-65M 6x70 9-13274-70M 6x75 9-13274-75M 6x80 9-13274-80M 6x85 9-13274-85
Bag of stop 90K-12024-00-0-6
Bag of middlelock, verticalK-11864
Cover railextension9-28483-05-0-*
Gear extension6-23173-00-0-*
Lift-Sliding fittings G.U-933
Lift-Tilt-Sliding fittings G.U-953
Bag of middlelock for gearK-12058-00-0-3
Cover for recessof middle lock9-29494
Optional parts
Cover disk9-09961-00-0-*
Sleeve9-09962-00-0-*
83
FERCOLift-Sliding fittings G.U-933
Fitting requirementsaccording to size of sashes for schemes A and C [1]Qty Description Akotherm Alcan Alisol 3A C1 2 Basic box G.U-933 K-14462-00-0-3 K-14462-00-0-3 K-14462-00-0-31 2 Additional box G.U-933 K-14495-00-0-3 K-14496-00-0-3 K-14493-00-0-31 2 Handle DIRIGENT 6-24608-00-0-* 6-24608-00-0-* 6-24608-00-0-*
2 Bag of stop 90 K-12040-00-0-6 K-12040-00-0-61 Bag of thread plate2 Thread plate1 Bag of locking bolts K-11744-00-0-3 K-11744-00-0-3 K-11302-00-0-3
1 2 Lift-locking gear G.U-933Length G [2] Article No. SH SH SH1100 410 6-22944-11-0-* 775-1150 775-1150 775-11501650 410 6-22944-16-0-* 1175-1700 1175-1700 1175-17002050 1010 6-22944-20-0-* 1775-2100 1775-2100 1775-21002200 1010 6-22944-22-0-* 1925-2250 1925-2250 1925-2250
1 2 Connecting bar P 960Length Article No. SW SW SW1000 9-27695-10-0-3 720-1450 720-1450 720-14501500 9-27695-15-0-3 1451-1950 1451-1950 1451-19501800 9-27695-18-0-3 1951-2200 1951-2200 1951-22002600 9-27695-26-0-3 2201-3300 2201-3300 2201-3300
[1] Schemes D, F, G and H upon request.[2] Exact gear position according to profile dimensions.
according to profile system
Lift-locking gear
Plug
Locking bolt
HandleDIRIGENT
Locking boltScheme C
Locking bolt
Runner, front Support,bottom
Connecting bar P 960
Runner, rear Rubberbuffer
Fitting requirementsaccording to size of sashes for schemes A and C [1]Qty Description Brökelmann Heroal ParsalA C1 2 Basic box G.U-933 K-14462-00-0-3 K-14462-00-0-3 K-14462-00-0-31 2 Additional box G.U-933 K-14497-00-0-3 K-14489-00-0-3 K-14491-00-0-31 2 Handle DIRIGENT 6-24608-00-0-* 6-24608-00-0-* 6-24608-00-0-*
2 Bag of stop 90 no scheme C no scheme C1 Bag of thread plate K-12135-00-0-32 Thread plate1 Bag of locking bolts K-12261-00-0-3
1 2 Lift-locking gear G.U-933Length G [2] Article No. SH SH SH1100 410 6-22944-11-0-* 770-1145 783-1158 775-11501650 410 6-22944-16-0-* 1170-1695 1183-1708 1175-17002050 1010 6-22944-20-0-* 1770-2095 1783-2108 1775-21002200 1010 6-22944-22-0-* 1920-2245 1933-2258 1925-2250
1 2 Connecting bar P 960Length Article No. SW SW SW1000 9-27695-10-0-3 720-1450 720-1450 720-14501500 9-27695-15-0-3 1451-1950 1451-1950 1451-19501800 9-27695-18-0-3 1951-2200 1951-2200 1951-22002600 9-27695-26-0-3 2201-3300 2201-3300 2201-3300
[1] Schemes D, F, G and H upon request.[2] Exact gear position according to profile dimensions.
84
FERCOLift-Sliding fittings G.U-933
according to profile system
Lift-locking gear
Plug
Locking bolt
HandleDIRIGENT
Locking boltScheme C
Locking bolt
Runner, front Support,bottom
Connecting bar P 960
Runner, rear Rubberbuffer
Fitting requirementsaccording to size of sashes for schemes A and C [1]Qty Description VAWA C1 2 Basic box G.U-933 K-14462-00-0-31 2 Additional box G.U-933 K-14499-00-0-31 2 Handle DIRIGENT 6-24608-00-0-*
2 Bag of stop 90 no scheme C1 Bag of thread plate2 Thread plate1 Bag of locking bolts
1 2 Lift-locking gear G.U-933Length G [2] Article No. SH1100 410 6-22944-11-0-* 783-11581650 410 6-22944-16-0-* 1183-17082050 1010 6-22944-20-0-* 1783-21082200 1010 6-22944-22-0-* 1933-2258
1 2 Connecting bar P 960Length Article No. SW1000 9-27695-10-0-3 720-14501500 9-27695-15-0-3 1451-19501800 9-27695-18-0-3 1951-22002600 9-27695-26-0-3 2201-3300
[1] Schemes D, F, G and H upon request.[2] Exact gear position according to profile dimensions.
Fitting requirementsaccording to size of sashes for schemes A and C [1]Qty Description Remi Claeys Reynolds TKIA C Ekonal1 2 Basic box G.U-933 K-14462-00-0-3 K-14462-00-0-3 K-14462-00-0-31 2 Additional box G.U-933 K-14501-00-0-3 K-14492-00-0-3 K-14499-00-0-31 2 Handle DIRIGENT 6-24608-00-0-* 6-24608-00-0-* 6-24608-00-0-*
2 Bag of stop 901 Bag of thread plate K-13392-00-0-32 Thread plate 9-24414-00-0-31 Bag of locking bolts K-12257-00-0-3 K-13391-00-0-3 K-12261-00-0-3
1 2 Lift-locking gear G.U-933Length G [2] Article No. SH SH SH1100 410 6-22944-11-0-* 780-1155 787-1162 783-11581650 410 6-22944-16-0-* 1180-1705 1187-1712 1183-17082050 1010 6-22944-20-0-* 1780-2105 1787-2112 1783-21082200 1010 6-22944-22-0-* 1930-2255 1937-2262 1933-2258
1 2 Connecting bar P 960Length Article No. SW SW SW1000 9-27695-10-0-3 720-1450 720-1450 720-14501500 9-27695-15-0-3 1451-1950 1451-1950 1451-19501800 9-27695-18-0-3 1951-2200 1951-2200 1951-22002600 9-27695-26-0-3 2201-3300 2201-3300 2201-3300
[[1] Schemes D, F, G and H upon request.[2] Exact gear position according to profile dimensions.
85
FERCOLift-Tilt-Sliding fittings G.U-953
Fitting requirementsaccording to size of sashes for scheme AQty Description Remi ClaeysA Ekonal1 Basic box G.U-953, DIN left hand K-14464-00-L-3
Basic box G.U-953, DIN right hand K-14464-00-R-31 Box of middle stay arm, DIN left hand K-11867-00-L-3
Box of middle stay arm, DIN right hand K-11867-00-R-3SW 1701 -
1 Packing for middle stay arm 9-31466-022 Packing for guide 9-31463-021 Additional box G.U-953 K-14513-00-0-31 Handle DIRIGENT 6-24613-00-0-*1 Lift-locking gear G.U-953
Length G [2] Article No. SH1100 410 6-26280-11-0-* 805-12141650 410 6-26280-16-0-* 1215-18142050 1010 6-26280-20-0-* 1815-22652200 1010 6-26280-22-0-* 2266-2715
1 Connecting bar P 959Length Article No. SW1000 9-28355-10-0-3 800-14501500 9-28355-15-0-3 1451-19501800 9-28355-18-0-3 1951-22002600 9-28355-26-0-3 2201-3000
1 Connecting bar P 960Length Article No. SW1000 9-27695-10-0-3 800-14501500 9-27695-15-0-3 1451-19501800 9-27695-18-0-3 1951-22002600 9-27695-26-0-3 2201-3000
[2] Exact gear position according to profile dimensions.
Runner, front Rubberbuffer
Connecting bar P 960
Runner, rear
Plug
Handle DIRIGENTCountersunk screwM 6 x 65/75
GuideStay arm glider
Stay arm, front Connecting bar P 959
Stay arm, middle Rubber buffer
Stay arm, rear
Locking caseEnd piece
Locking case
Lift-locking gear
Locking caseCover
Support,bottom
according to profile system
86
FERCOFan-light openers, face-fixed
for aluminium windows
ApplicationRange of applications for face-fixed Fan-light Openers:– Bottom hung inward opening or top hung outward opening
windows with one or more sashes– Installations for group ventilation as well as smoke and heat
evacuation.
DesignsFan-light Opener VENTUS F 200Slimline, unobtrusive opener with force locked horizontal stay armsfor rectangular, oblique angle head, arch head and segmental archhead tilt windows. Vertical and horizontal rods covered with clip-onaluminium profile.
Fan-light Opener VENTUS F 300Slimline, unobtrusive opener with force locked horizontal stay armsfor rectangular and oblique angle head tilt windows. Vertical andhorizontal rods covered with clip-on aluminium profile.
Operation variants– Lever handle– Lever handle and flexible transmission– Lever handle and rod transmission– Vertical gear, articulated crank handle fixed or removable– Corner gear, articulated crank handle fixed or removable– Vertical or corner gear with transmissions– Electric drives for individual and group control
Group ventilation installationsOperation of ventilation sashes by electric drives ELTRAL.For electric drives an individual control is possible also.
Standard coloursColour EV 1– Aluminium parts anodized in natural tone– Other visible parts in silver colour
Colour UC 3– Aluminium parts anodized in medium bronze colour– Other visible parts in medium brown colour
Colour UC 5– Aluminium parts anodized in dark bronze colour– Other visible parts in dark brown colour
White– Aluminium parts with white lacquer finish– Other visible parts in white colour
Materials, surface sealing ferGUard* silver andferGUard* yellowThe fitting parts are made of high quality steel, zinc die-casting andaluminium alloys.According to the material they are protected against corrosion by thesurface sealing ferGUard* silver or ferGUard* yellow, aluminiumparts are anodized.
Article NumbersExampleArticle No.6-24841-50-0-1
6-24841- - - Part number- -50- - Size- - -L- Left hand assembly- - -R- Right hand assembly- - -0- Usable on both sides- - - -1T Nickel silver- - - -1 F 1/EV 1, natural or silver colour, zinc die-casting
parts galvanized and blue bichromated- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass or brass colour, steel
parts galvanized and yellow bichromated- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black, powder-coated (RAL 9005)- - - -7 White, powder-coated (RAL 9016)- - - -7T White, powder-coated (RAL 9010)- - - -8 Stainless steel oder inox colour- - - -* Surface treatment variable (see price-list)
Abbreviations and ordering dimensionsB Total sash widthB - E Sill to bottom edge of lever handle or articulated crank
handle (straight)D Centre of vertical rod to edge of sashE - B Top edge of sash on operation side to sill for oblique
angle head and segmental arch head windowsE - E Top edge of sash on operation side to bottom edge of lever
handle or articulated crank handle (straight) for obliqueangle head and segmental arch head windows
FB Sash widthFBs Sash width for oblique angle head windowsFH Sash heightFHf Sash height for oblique angle head windowsO - B Top edge of sash to sillO - E Top edge of sash to bottom edge of lever handle or
articulated crank handle (straight)Ö Opening width of sashr RadiusRLB Frame width in the clearRLH Frame height in the clearT Depth of revealU - B Bottom edge of sash to sill, springing of arch to sill for
arch head windowsU - E Bottom edge of sash to bottom edge of lever handle or
articulated crank handle (straight), springing of arch tobottom edge of lever handle or articulated crank handle(straight)
ü Projection of window sillx Installation space for vertical and corner gearsy Sash backset of outward opening windowsz Distance between individual sashes
ApplicationFan-light Opener Sash width Sash height Opening Stroke O - E Space requirement Rod Standard
Dim. FB Dim. FH width mm min. mm lateral top Ø mm assemblymm min. mm mm mm mm drawing
VENTUS F 200 400-3600 [1] 300 200 [1] 50 [1] 440 20 20 8 GB.43700.1400-3600 250 165 40
VENTUS F 300 620-3600 350 300 [1] 70 [1] 570 26 26 10 GB.42700.1220 50
[1] Standard version
87
FERCOOptional parts
Fan-light Openers, face-fixed
Fan-light Opener VENTUS F 200
Lever handleStroke 40 mm6-28681-40-0-*
Swivellinglever handleStroke 50 mmK-12608-00-0-*
Packingfor angularsash bracket9-33105
Rod clamp6-26265-00-0-1
Bow9-34723-00-0-1
Chain withrod clamps6-26268-00-0-1
Inset with brace6-26267-00-0-1T angle9-34721-00-0-1
T cover9-37591-00-0-*
Bag of T angle VENTUS F 200K-14194-00-0-*
Guide9-28893
Sleeve6-22842-00-0-1
Guide for transmission9-33711-00-0-*
Bag of T angle VENTUS F 200
Stay arm with lift-offsecurity device6-29589-00-0-*Stay arm bearing6-29134-00-0-*2 rod bearings9-38016-00-0-0
Fan-light Opener VENTUS F 300
Lever handleStroke 50 mm6-26249-50-0-*
Swivellinglever handleStroke 50K-14242-50-0-*Stroke 70K-14242-70-0-*
T corner transmission6-27089-00-0-1
Guide9-34491-00-0-0
Cover profile9-35227-00-0-*
Bag of T angle VENTUS F 300K-14201-00-0-*
Sleeve6-26813-00-0-1
Guide9-34491-00-0-0
Bag of T angle VENTUS F 300
Stay arm with lift-offsecurity device6-27451-00-0-*
Shim for packing9-34509-00-0-3
Accessories for vertical rod, Ø 8 mm
Accessories for vertical rod, Ø 10 mm
Packing forsash bracket9-34508
ELTRAL 1000/2306-29009-00-0-*
Electric driveElectric drive 230 V
88
FERCO
L
T
Mullion passage transmission
Box of mullion passage transmissionK-15384-08-0-*Mullion depth T 17 to 80 mmArm length L 126 mm
Box of mullion passage transmissionK-15384-15-0-*Mullion depth T 17 to 150 mmArm length L 266 mm
Single parts1 mullion transmission 6-292601 guide 9-336001 guiding profile 9-288881 locking part 9-358601 cover profile 9-334431 end cap 9-34412
Optional parts
Fan-light Openers, face-fixed
89
FERCO
Fitting requirements for openers with lever handleaccording to quantity of stay arms for schemes 1 to 4nQuantity Description Article No.
1 2n 3n 4n1 1 1 1 Basic box VENTUS F 200
with lever handle – without sash bracket K-15011-00-0-*1 2 3 Bag of stay arm VENTUS F 200
without sash bracket K-15013-00-0E*1 2 3 4 Box of sash bracket VENTUS F 200
Angular sash bracket K-15225-00-0E*1 1 1 1 Vertical and horizontal rod – to cut from:
Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 1 Cover profile – to cut from:
Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*
Fan-light Opener VENTUS F 200
Standard version with lever handle
Vertical rod
Corner cover 9-34220-00-0-*
Lever handle6-28681-50-0-*
Guide9-28893
Guide9-28893
Guide9-28893
Angular sash bracket6-25772-00-0-1Cover9-33346-01-0-*
End cap9-34412-00-0-*
Cover profile
Stay arm6-29131-00-0-*Stay arm bearing6-29134-00-0-*
Rod bearing9-38016-00-0-0= 2 pieces
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261-00-0-0
Horizontal rod
90
FERCO
Fitting requirements for openers with vertical gearaccording to quantity of stay arms for schemes 1 to 4nQuantity Description Article No.
1 2n 3n 4n1 1 1 1 Basic box VENTUS F 200
without lever handle – without sash bracket K-15012-00-0-*1 2 3 Bag of stay arm VENTUS F 200
without sash bracket K-15013-00-0E*1 2 3 4 Box of sash bracket VENTUS F 200
Angular sash bracket K-15225-00-0E*1 1 1 1 Horizontal rod – to cut from:
Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 1 Bag of vertical gear, model A K-13402-00-0-1
Fitting requirements for openers with corner gearaccording to quantity of stay arms for schemes 1 to 4nQuantity Description Article No.
1 2n 3n 4n1 2 3 4 Bag of stay arm VENTUS F 200
without sash bracket K-15013-00-0E*1 1 1 1 End cap 9-34412-00-0-*1 2 3 4 Box of sash bracket VENTUS F 200
Angular sash bracket K-15225-00-0E*1 1 1 1 Horizontal rod – to cut from:
Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 1 Bag of vertical gear, model A K-13402-00-0-11 1 1 1 Bag of additional parts for corner gear, model A K-13403-00-0-*
Fitting requirements for articulated crank rod and accessoriesaccording to types a to h for vertical and corner gearsTypes Description Article No.a b c d e f g h1 1 1 1 1 1 1 1 Articulated crank rod – to cut from:
Aluminium tube, stock length 5000 mm 9-32230-50-0-*1 1 1 1 1 1 1 1 Bag of hinged crank K-13162-00-0-*
1 1 2 2 1 1 Bag of universal joint for crank rod K-13164-00-0-11 1 1 1 Bag of coupling horn K-13165-00-0-1
Fan-light Opener VENTUS F 200
Standard version with vertical and corner gears
1 Universal jointfor gear9-33323-00-0-1
Corner cover 9-34220-00-0-*
1 Vertical gearModel A6-25766-00-0-1
1 Conicalnotched pin9-11595-14-0-1
1 Screw9-33322-00-0-0
Bag ofvertical gearK-13402-00-0-1
1 Cover9-33337-00-0-*
1 Doubleuniversal joint9-33333-00-0-1
1 Bearing9-33335
1 Screw9-33322-00-0-0
1 Connecting rod9-25476-05-0-1
1 Lifting stopStroke 409-33313-00-0-3
Bag ofcorner gearK-13403-00-0-*
Bag of universaljoint for crank rodK-13164-00-0-1
1 Universal jointfor crank rod9-24050-00-0-1
2 Conicalnotched pin9-11595-14-0-1 1 Coupling horn
9-29570-00-0-11 Conical
notched pin9-11595-14-0-11 Rod guide
6-25128
1 Hinged crank9-32231-00-0-*
1 Rod bracket9-32232-00-0-*
1 Conicalnotched pin9-11595-14-0-1
Crank rod9-32230-50-0-*
Bag of hinged crankK-13162-00-0-*
Stay arm6-29131-00-0-*Stay arm bearing6-29134-00-0-*
Angular sash bracket6-25772-00-0-1Cover9-33346-01-0-*
Cover profile End cap9-34412-00-0-*
Horizontal rod
Rod bearing9-38016-00-0-0= 2 pieces
Guide9-28893
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261-00-0-0
Bag ofcoupling hornK-13165-00-0-1
91
FERCO
Fitting requirements for openers with electric drive ELTRAL, vertical installationaccording to quantity of stay arms for schemes 1 to 4nQuantity Description Article No.
1 2n 3n 4n1 1 1 1 Basic box VENTUS F 200
without lever handle – without sash bracket K-15012-00-0-*1 2 3 Bag of stay arm VENTUS F 200
without sash bracket K-15013-00-0E*1 2 3 4 Box of sash bracket VENTUS F 200
Angular sash bracket K-15225-00-0E*1 1 1 1 Horizontal rod – to cut from:
Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 1 Electric drive ELTRAL 1200/230 6-26445-00-0-*
alternatively: Electric drive ELTRAL 1200/24 6-26447-00-0-*1 1 1 1 Connecting rod, Ø 8 mm, B = 400-3600 9-34764-00-0-1
Fitting requirements for openers with electric drive ELTRAL, horizontal installationaccording to quantity of stay arms for schemes 1 to 4nQuantity Description Article No.
1 2n 3n 4n1 2 3 4 Bag of stay arm VENTUS F 200
without sash bracket K-15013-00-0-*1 1 1 1 End cap 9-34412-00-0-*1 2 3 4 Box of sash bracket VENTUS F 200
Angular sash bracket K-15225-00-0E*1 1 1 1 Horizontal rod – to cut from:
Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 1 Electric drive ELTRAL 1200/230 6-26445-00-0-*
alternatively: Electric drive ELTRAL 1200/24 6-26447-00-0-*1 1 1 1 Bag of connecting parts 1200, B = 620-3600 K-14103-00-0-1
alternatively: Electric drive ELTRAL 300 E1 9-31020-01-0-*alternatively: Electric drive ELTRAL 300/24 9-31021-00-0-*alternatively: Bag of connecting parts 300, B = 650-3600 K-15216-00-0-1
Fan-light Opener VENTUS F 200
Standard version with electric drives ELTRAL for vertical and horizontal installation
Horizontal rod
Corner cover 9-34220-00-0-*
Connecting rod9-34764-00-0-1
Electric driveELTRAL 1200
Electric driveELTRAL 1200
Horizontal rod
Cover profile
Coupling6-29592-00-0-1
Connecting rod9-31018-01-0-1
Angular sash bracket6-25772-00-0-1Cover9-33346-01-0-*
Angular sash bracket6-25772-00-0-1Cover9-33346-01-0-*
Connecting rod9-34764-00-0-1
Coupling6-26448-00-0-1
Guide9-26997
Electric driveELTRAL 300
Bag of connecting partsK-14103-00-0-1
Bag of connecting partsK-15216-00-0-1
Cover profile End cap9-34412-00-0-*
Guide9-28893
Stay arm6-29131-00-0-*Stay arm bearing6-29134-00-0-*
Rod bearing9-38016-00-0-0= 2 pieces
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261-00-0-0
Stay arm6-29131-00-0-*Stay arm bearing6-29134-00-0-*
Rod bearing9-38016-00-0-0= 2 pieces
End cap9-34412-00-0-*
92
FERCO
Fitting requirementsaccording to quantity of stay arms for schemes 1 to 3nQuantity Description Article No.
1 2n 3n1 1 1 Basic box VENTUS F 200
with lever handle – without sash bracket K-15011-00-0-*1 2 Bag of stay arm VENTUS F 200
without sash bracket K-15013-00-0E*1 2 3 Box of sash bracket VENTUS F 200
Angular sash bracket K-15225-00-0E*Bag of additional locking VENTUS F 200,verticalSash overlap 0 mm K-15210-00-0-*Sash overlap 6 to 7 mm K-15210-60-0-*Sash overlap 7 to 8 mm K-15210-70-0-*Sash overlap 8 to 9 mm K-15210-80-0-*Sash overlap 9 to 10 mm K-15210-90-0-*
1 1 1 Vertical and horizontal rod,vertical locking – to cut from:Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 Cover profile – to cut from:
Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*Note: FB min. 458 mm, FH min. 400 mm
Fan-light Opener VENTUS F 200
Standard version with lever handle and additional side locking
Horizontal rod
Corner cover 9-34220-00-0-*
Cover profile9-33443-00-0-*Locking pin6-27532-00-0-1Guiding profile9-28888-00-0-1Locking plate9-32151-**-0-*
Lever handle6-28681-50-0-*
Vertical rod
Stay arm6-29131-00-0-*Stay arm bearing6-29134-00-0-*
Cover profile
Guide9-28893
Guide9-28893
Guide9-28893
Rod bearing9-38016-00-0-0= 2 pieces
Guide9-28893End cap9-34412
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261-00-0-0
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261
Angular sash bracket6-25772-00-0-1Cover9-33346-01-0-*
93
FERCOFan-light Opener VENTUS F 200
Standard version for arch head and segmental arch head windows – Scheme 1
Fitting requirements for arch head windowsScheme 1Quantity Description Article No.
11 Lever handle VENTUS F 200
Stroke 50 mm 6-28681-50-0-*1 Bag of stay arm VENTUS F 200
without sash bracket K-15483-00-0-*1 Box of sash bracket VENTUS F 200
Angular sash bracket, articulated K-15507-00-0-*1 Additional box VENTUS F 200
Arch head and segmental arch head windows K-15484-00-0-*1 Flexible transmission
FB 500- 900 = length 700 mm 6-29495-07-0-*FB 901-1300 = length 1000 mm 6-29495-10-0-*
1 Vertical rod – to cut from:Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
altern.: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
altern.: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*
Fitting requirements for segmental arch head windowsScheme 1Quantity Description Article No.
11 Lever handle VENTUS F 200
Stroke 50 mm 6-28681-50-0-*1 Bag of stay arm VENTUS F 200
without sash bracket K-15483-00-0-*1 Box of sash bracket VENTUS F 200
Angular sash bracket, articulated K-15507-00-0-*1 Additional box VENTUS F 200
Arch head and segmental arch head windows K-15484-00-0-*1 Flexible transmission
FB 500- 600 = length 400 mm 6-29495-04-0-*FB 601- 900 = length 700 mm 6-29495-07-0-*FB 901-1300 = length 1000 mm 6-29495-10-0-*
1 Vertical rod – to cut from:Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
altern.: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
altern.: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*
Stay arm withstay arm bearing
Cover profileCover profile
Flexibletransmission
Angularsash bracketCover
Vertical rod
Lever handle
Coverprofile
94
FERCOFan-light Opener VENTUS F 200
Standard version for arch head and segmental arch head windows – Scheme 2n
Flexibletransmission
Angular sash bracketarticulatedCover
Stay arm withstay arm bearing
Cover profile Cover profile
Fitting requirements for arch head windowsScheme 2nQuantity Description Article No.
2n1 Lever handle VENTUS F 200
Stroke 50 mm 6-28681-50-0-*2 Box of stay arm VENTUS F 200
without sash bracket K-15483-00-0-*2 Box of sash bracket VENTUS F 200
Angular sash bracket, articulated K-15507-00-0-*1 Additional box VENTUS F 200
Arch head and segmental arch head windows K-15484-00-0-*1 Additional box VENTUS F 200/2n
Arch head and segmental arch head windows K-15485-00-0-*1 Flexible transmission
between lever handle and stay armFB 1300-2100 = length 1000 mm 6-29495-10-0-*FB 2101-2400 = length 1300 mm 6-29495-13-0-*
1 Flexible transmission between stay armsFB 1300-1700 = length 400 mm 6-29495-04-0-*FB 1701-1900 = length 700 mm 6-29495-07-0-*FB 1901-2400 = length 1000 mm 6-29495-10-0-*
1 Vertical rod – to cut from:Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
altern.: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
altern.: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*
Fitting requirements for segmental arch head windowsScheme 2nQuantity Description Article No.
2n1 Lever handle VENTUS F 200
Stroke 50 mm 6-28681-50-0-*2 Box of stay arm VENTUS F 200
without sash bracket K-15483-00-0-*2 Box of sash bracket VENTUS F 200
Angular sash bracket, articulated K-15507-00-0-*1 Additional box VENTUS F 200
Arch head and segmental arch head windows K-15484-00-0-*1 Additional box VENTUS F 200/2n
Arch head and segmental arch head windows K-15485-00-0-*1 Flexible transmission
between lever handle and stay armFB 1200-2400 = length 700 mm 6-29495-07-0-*
1 Flexible transmission between stay armsFB 1200-1500 = length 400 mm 6-29495-04-0-*FB 1501-1800 = length 700 mm 6-29495-07-0-*FB 1801-2100 = length 1000 mm 6-29495-10-0-*FB 2101-2400 = length 1300 mm 6-29495-13-0-*
1 Vertical rod – to cut from:Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
altern.: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
altern.: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*
Cover profile
Lever handle
Angular sash bracketarticulatedCover
Verticalrod
Cover profile
Flexibletransmission
Stay arm withstay arm bearing Cover profile
95
FERCO
Fitting requirements for oblique angle head windowsScheme 1Quantity Description Article No.
11 Basic box VENTUS F 200 with lever handle
for oblique angle head windows K-15206-00-0-*altern.: Basic box VENTUS F 200 without lever handle
for oblique angle head windows with K-15207-00-0-*vertical gear and ELTRAL, vertical installationBasic box VENTUS F 200 without lever handle,without corner transmission, for oblique anglehead windows with corner gear and ELTRAL, K-15208-00-0-*horizontal installationBag of additional locking VENTUS F 200,horizontalSash overlap 0 mm K-13033-01-0-*Sash overlap 6 to 7 mm K-13033-60-0-*Sash overlap 7 to 8 mm K-13033-70-0-*Sash overlap 8 to 9 mm K-13033-80-0-*Sash overlap 9 to 10 mm K-13033-90-0-*
1 FBs = 1200-1600 mm2 FBs = 1601-2000 mm1 Vertical and horizontal rod – to cut from:
Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
altern.: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 Cover profile – to cut from:
Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
altern.: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*
Fan-light Opener VENTUS F 200
Standard version for oblique angle head windows
Locking pin6-27532-00-0-1
Corner transmissionwith spring androd clamps6-23796-00-0-1
Cover profile
Lever handle6-28681-50-0-*
Vertical rod
Guide9-28893
Guide9-28893
Guide9-28893
Angular sash bracketarticulated6-25830-00-0-*Cover9-33346-01-0-*
Rod bearing9-38016-00-0-0= 2 pieces
Horizontal rod
Cover profile9-33443-00-0-*
Stay arm6-29131-00-0-*Stay arm bearing6-29134-00-0-*
End cap9-34412-00-0-*
Guiding profile9-28888-00-0-1Locking plate9-32151-**-0-*
96
FERCOFan-light Opener VENTUS F 200
Flexible transmission, special versions
1/2 1/2M
min. 350
z
D
FB = min. 400 - 1200
Fan-light Opener VENTUS F 200Common operation of 2 sashes, one abovethe other, type 2ü, with T angle (page 87)
FB = min. 460
min. 390
Fan-light Opener VENTUS F 200Side hung sash with T angle (page 87)
Special versions
FB = min. 440-1200 FB = min. 440
1/2 1/2 1/2 1/2
B = max. 3600
min. 20
MMz
min. 160
Fan-light Opener VENTUS F 200Common centre operation of 2 side by sidesashes, type 2n, with T angle (page 87)
(1 stay arm)
Flexible transmission
Fitting requirements for flexible transmissionQuantity Description Article No.
1 Additional box of flexible transmission K-14312-00-0-*1 Flexible transmission
Size 02, length 200 mm 6-29495-02-0-*Size 04, length 400 mm 6-29495-04-0-*Size 07, length 700 mm 6-29495-07-0-*Size 10, length 1000 mm 6-29495-10-0-*Size 13, length 1300 mm 6-29495-13-0-*Size 20, length 2000 mm 6-29495-20-0-*
Dim. T Dim. A
730 170700 200670 230640 260610 290580 320550 350520 380490 410460 440
430 170400 200370 230340 260310 290280 320250 350
Len
gth
700
Len
gth
100
0
Dim. T Dim. A
670 230640 260610 290580 320550 350520 380490 410460 440
430 170400 200370 230340 260310 290280 320250 350
Dim. Ü max. 40 mm
Len
gth
100
0L
eng
th 7
00
Dim. T Dim. A
240 360210 380180 400150 425120 450
90 17060 19030 2000 250
Len
gth
700
Len
gth
400
Dim
. A
min
. 13
0
Dim
. A
min
. 13
0
min
. 13
0
Dim
. A
Dim. Tup to250 mmwithoutguide
Dim. Tmore than250 mmwith guide
Side view offlexible transmission
Dim
. A
Mor
e th
an T
250
= 1
30Le
ss t
han
T 2
50 =
180
From T 250 with guide
Minimum dimensions according to depth of reveal
To
end
of le
ver
hand
le m
in. 3
50
Sill
to e
nd o
f lev
er h
andl
e (M
inim
um =
Dim
. A +
350
)T
op e
dge
of s
ash
to s
ill
R min
. 80
R m
in. 8
0
D
20
min. 400
min
. 100
97
FERCOIndividual and total rod lengths
Fan-light Opener VENTUS F 200 with lever handle
Rod length according to total sash width and dim. O - ETotal sash width, dim. FB or B
Length of 2600 2800 3000 3200 3400 3600vertical Length of horizontal rod
O - E rod 2265 2465 2665 2865 3065 32651000 767 3032 3232 3432 3632 3832 40321100 867 3132 3332 3532 3732 3932 41321200 967 3232 3432 3632 3832 4032 42321300 1067 3332 3532 3732 3932 4132 43321400 1167 3432 3632 3832 4032 4232 44321500 1267 3532 3732 3932 4132 4332 45321600 1367 3632 3832 4032 4232 4432 46321700 1467 3732 3932 4132 4332 4532 47321800 1567 3832 4032 4232 4432 4632 48321900 1667 3932 4132 4332 4532 4732 49322000 1767 4032 4232 4432 4632 4832 5032Rod and cover profile size 33 = greyRod and cover profile size 60 = white
Rod length according to total sash width and dim. O - ETotal sash width, dim. FB or B
Length of 2600 2800 3000 3200 3400 3600vertical Length of horizontal rod
O - E rod 2265 2465 2665 2865 3065 32651000 767 3032 3232 3432 3632 3832 40321100 867 3132 3332 3532 3732 3932 41321200 967 3232 3432 3632 3832 4032 42321300 1067 3332 3532 3732 3932 4132 43321400 1167 3432 3632 3832 4032 4232 44321500 1267 3532 3732 3932 4132 4332 45321600 1367 3632 3832 4032 4232 4432 46321700 1467 3732 3932 4132 4332 4532 47321800 1567 3832 4032 4232 4432 4632 48321900 1667 3932 4132 4332 4532 4732 49322000 1767 4032 4232 4432 4632 4832 5032Rod and cover profile size 33 = greyRod and cover profile size 60 = white
Rod length according to total sash width and dim. O - ETotal sash width, dim. FB or B
Length of 1400 1600 1800 2000 2200 2400vertical Length of horizontal rod
O - E rod 1065 1265 1465 1665 1865 20651000 767 1832 2032 2232 2432 2632 28321100 867 1932 2132 2332 2532 2732 29321200 967 2032 2232 2432 2632 2832 30321300 1067 2132 2332 2532 2732 2932 31321400 1167 2232 2432 2632 2832 3032 32321500 1267 2332 2532 2732 2932 3132 33321600 1367 2432 2632 2832 3032 3232 34321700 1467 2532 2732 2932 3132 3332 35321800 1567 2632 2832 3032 3232 3432 36321900 1667 2732 2932 3132 3332 3532 37322000 1767 2832 3032 3232 3432 3632 3832Rod and cover profile size 33 = greyRod and cover profile size 60 = white
Rod length according to total sash width and dim. O - ETotal sash width, dim. FB or B
Length of 700 800 1000 1200vertical Length of horizontal rod
O - E rod 365 415 515 6151000 767 1132 1182 1282 13821100 867 1232 1282 1382 14821200 967 1332 1382 1482 15821300 1067 1432 1482 1582 16821400 1167 1532 1582 1682 17821500 1267 1632 1682 1782 18821600 1367 1732 1782 1882 19821700 1467 1832 1882 1982 20821800 1567 1932 1982 2082 21821900 1667 2032 2082 2182 22822000 1767 2132 2182 2282 2382Rod and cover profile size 18 = whiteRod and cover profile size 33 = grey
M
D min. 12
min
. 250
B = up to 2400
FB left hand FB right hand
1/2 1/2 1/2 1/2M M
FB = up to 2400
350 350M1 M2
B = up to 3600
FB left hand FB right handFB centrez1 z2
1/2 1/2M 1/2 1/2M 1/2 1/2M
Scheme 2n
FB = up to 3600
350 350
350 350 350 350
M1 M2 M31/2 1/2
B = up to 3600
FB left hand FB right handz
M1 M2 M1 M2
20
z
FB = 400-120020
1/2 1/2
min. 350
O–
E m
in.
440
Scheme 1Lever handle
Sas
h h
eig
ht
FH
Scheme 3n
Scheme 4n
98
FERCO
Fitting requirements for openers with lever handleaccording to quantity of stay arms for schemes 1 to 3nQuantity Description Article No.
1 2n 3n1 1 1 Basic box VENTUS F 200 with lever handle
for top hung outward opening windowsDim. y = 0- 4 mm [1] K-15168-00-L-*Dim. y = 5-13 mm [1] K-15165-00-L-*
1 2 Box of stay arm VENTUS F 200for top hung outward opening windowsDim. y = 0- 4 mm [1] K-15169-00-L-*Dim. y = 5-13 mm [1] K-15167-00-L-*
1 1 1 Vertical and horizontal rod – to cut from:Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 Cover profile – to cut from:
Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*[1] = can be changed from left hand to right hand
Stay arm 2 – 6-29485-00-L-*Dim. y = 0-13
Sash bracket6-27782-04-0-*Dim. y = 0- 46-27782-25-0-*Dim. y = 5-13
Guide9-28893
Vertical rod
Guide9-28893
Horizontal rod
Corner cover 9-34220-00-0-*
Lever handle6-28681-50-0-*
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261-00-0-0
B = up to 2400
Cover profile
RLB = 380-120020
min
. 300
RL
H
1/21/2
min. 350
M
22
U–
E m
in.
350
Dim. D
FB left hand z
1/2 1/2M
FB right hand
1/2 1/2M
RLB = up to 3000
350 1/2 1/2 350M3M2M1
RLB = up to 2400
350 M1 350M2
B = up to 3000
FB left hand
1/2 1/2M
z1 FB centre
1/2 1/2M
z2 FB right hand
1/2 1/2M
Scheme 2nScheme 1Lever handle
Scheme 3n
Fan-light Opener VENTUS F 200
for top hung outward opening windowsStandard version with lever handle
Dim. y
99
FERCO
Fitting requirements for openers with vertical gearaccording to quantity of stay arms for schemes 1 to 3nQuantity Description Article No.
1 2n 3n1 2 3 Bag of stay arm VENTUS F 200
for top hung outward opening windowsDim. y = 0- 4 mm [1] K-15169-00-L-*Dim. y = 5-13 mm [1] K-15167-00-L-*
1 1 1 Chain with rod clamps 6-29313-00-0-11 1 1 Corner transmission 9-38261-00-0-01 1 1 Corner cover 9-34220-00-0-*1 1 1 Horizontal rod – to cut from:
Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 Bag of vertical gear, model A K-13402-00-0-1
[1] = can be changed from left hand to right hand
Fitting requirements for openers with corner gearaccording to quantity of stay arms for schemes 1 to 3nQuantity Description Article No.
1 2n 3n1 2 3 Bag of stay arm VENTUS F 200
for top hung outward opening windowsDim. y = 0- 4 mm [1] K-15169-00-L-*Dim. y = 5-13 mm [1] K-15167-00-L-*
1 1 1 Horizontal rod – to cut from:Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 Bag of vertical gear, model A K-13402-00-0-11 1 1 Bag of additional parts for corner gear, model A K-13403-00-0-*
[1] = can be changed from left hand to right hand
Fitting requirements for articulated crank rod and accessoriesaccording to types a to h for vertical and corner gearsTypes Description Article No.a b c d e f g h1 1 1 1 1 1 1 1 Articulated crank rod – to cut from:
Aluminium tube, stock length 5000 mm 9-32230-50-0-*1 1 1 1 1 1 1 1 Bag of hinged crank K-13162-00-0-*
1 1 2 2 1 1 Bag of universal joint for crank rod K-13164-00-0-11 1 1 1 Bag of coupling horn K-13165-00-0-1
Fan-light Opener VENTUS F 200
for top hung outward opening windowsStandard version with vertical and corner gears
Horizontal rod
Corner cover 9-34220-00-0-*
Guide9-28893
Cover profile
Stay arm with guide 2 – 6-29485-00-L-*Dim. y = 0-13
Sash bracket6-27782-04-0-*Dim. y = 0- 46-27782-25-0-*Dim. y = 5-13
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261-00-0-0
1 Universal jointfor gear9-33323-00-0-1
1 Vertical gearModel A6-25766-00-0-1
1 Conicalnotched pin9-11595-14-0-1
1 Screw9-33322-00-0-0
Bag ofvertical gearK-13402-00-0-1
1 Connecting rod9-25476-05-0-1
1 Lifting stopStroke 409-33313-00-0-3
1 Cover9-33337-00-0-*
1 Doubleuniversal joint9-33333-00-0-1
1 Bearing9-33335
1 Screw9-33322
Bag ofcorner gearK-13403-00-0-*
Bag of universaljoint for crank rodK-13164-00-0-1
1 Universal jointfor crank rod9-24050-00-0-1
2 Conicalnotched pin9-11595-14-0-1
1 Rod guide6-25128
1 Coupling horn9-29570-00-0-1
1 Conicalnotched pin9-11595-14-0-1
Bag ofcoupling hornK-13165-00-0-1
1 Hinged crank9-32231-00-0-*
1 Rod bracket9-32232-00-0-*
1 Conicalnotched pin9-11595-14-0-1
Bag of hinged crankK-13162-00-0-*
Crank rod9-32230-50-0-*
100
FERCO
Fitting requirements for openers with electric drive ELTRAL, vertical installationaccording to quantity of stay arms for schemes 1 to 3nQuantity Description Article No.
1 2n 3n1 2 3 Bag of stay arm VENTUS F 200
for top hung outward opening windowsDim. y = 0- 4 mm [1] K-15169-00-L-*Dim. y = 5-13 mm [1] K-15167-00-L-*
1 1 1 Chain with rod clamps 6-29313-00-0-11 1 1 Corner transmission 9-38261-00-0-01 1 1 Corner cover 9-34220-00-0-*1 1 1 Horizontal rod – to cut from:
Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 Electric drive ELTRAL 1200/230 6-26445-00-0-*
alternatively: Electric drive ELTRAL 1200/24 6-26447-00-0-*1 1 1 Connecting rod, Ø 8 mm, B = 400-3000 9-34764-00-0-1
[1] = can be changed from left hand to right hand
Fitting requirements for openers with electric drive ELTRAL, horizontal installationaccording to quantity of stay arms for schemes 1 to 3nQuantity Description Article No.
1 2n 3n1 2 3 Bag of stay arm VENTUS F 200
for top hung outward opening windowsDim. y = 0- 4 mm [1] K-15169-00-L-*Dim. y = 5-13 mm [1] K-15167-00-L-*
1 1 1 Horizontal rod – to cut from:Rod Ø 8, size 06 – length 600 mm 9-25476-06-0E1Rod Ø 8, size 18 – length 1850 mm 9-25476-18-0E1Rod Ø 8, size 33 – length 3300 mm 9-25476-33-0E1
alternatively: Rod Ø 8, size 60 – stock length 6000 mm 9-25476-60-0E11 1 1 Cover profile – to cut from:
Cover profile, size 06 – length 800 mm 9-33444-06-0E*Cover profile, size 18 – length 1800 mm 9-33444-18-0E*Cover profile, size 33 – length 3050 mm 9-33444-33-0E*
alternatively: Cover profile, size 60 – stock length 6000 mm 9-33444-60-0E*1 1 1 1 Electric drive ELTRAL 1200/230 6-26445-00-0-*
alternatively: Electric drive ELTRAL 1200/24 6-26447-00-0-*1 1 1 1 Bag of connecting parts 1200, B = 620-3000 K-14103-00-0-1
alternatively: Electric drive ELTRAL 300 E1 9-31020-01-0-*alternatively: Electric drive ELTRAL 300/24 9-31021-00-0-*alternatively: Bag of connecting parts 300, B = 650-3000 K-15216-00-0-1[1] = can be changed from left hand to right hand
Fan-light Opener VENTUS F 200
for top hung outward opening windowsStandard version with electric drives ELTRAL for vertical and horizontal installation
Guide9-28893
Horizontal rod
Corner cover 9-34220-00-0-*
Connecting rod9-34764-00-0-1
Electric driveELTRAL 1200
Electric driveELTRAL 1200
Cover profile
Connecting rod9-31018-01-0-1
Connecting rod9-34764-00-0-1
Coupling6-26448-00-0-1
Guide9-26997-00-0-0
Electric driveELTRAL 300
Bag of connecting partsK-15216-00-0-1
Cover profile
Guide9-28893
Stay arm with guide 2 – 6-29485-00-L-*Dim. y = 0-13
Sash bracket6-27782-04-0-*Dim. y = 0- 46-27782-25-0-*Dim. y = 5-13
Stay arm with guide 2 – 6-29485-00-L-*Dim. y = 0-13
Sash bracket6-27782-04-0-*Dim. y = 0- 46-27782-25-0-*Dim. y = 5-13
Chain with rod clamps6-29313-00-0-1Corner transmission9-38261-00-0-0
Horizontal rod
Bag of connecting partsK-14103-00-0-1
Coupling6-29592-00-0-1
101
FERCO
ELTRAL 1200/230, 1200/230 IR, 1000/230, ELTRAL 300 E1
Electric drives 230 V
Application Description Article No.Tilt windows Electric drive ELTRAL 1200/230
for face-fixed fan-light openers 6-26445-00-0-*Technical dataSupply voltage V/Hz 230/50Current consumption A 0.21Protective system IP 50Limit switch electronicStarting delay % 20Connecting plug five-wayStroke max. mm 70Delay per stroke of 50 mm sec. 50Pushing force N 1200Length mm 210Width mm 36Height mm 76Optional partsElectric drive ELTRAL 1200/230 IRfor face-fixed fan-light openers 6-28171-00-0-*Technical dataSupply voltage V/Hz 230/50Current consumption A 0.21Protective system IP 50Limit switch electronicStarting delay % 20Connecting plug five-wayStroke max. mm 70Delay per stroke of 50 mm sec. 50Pushing force N 1200Length mm 210Width mm 36Height mm 76Infrared remote control 6-28170-00-0-0Electric drive ELTRAL 1000/230for face-fixed fan-light openers 6-29009-00-0-*Technical dataSupply voltage V/Hz 230/50Current consumption A 0.30Protective system IP 50Limit switch Load interruptionStarting delay % 20Connecting plug five-wayStroke max. mm 70Delay per stroke of 50 mm sec. 45Pushing force N 1200Length mm 210Width mm 36Height mm 76
Tilt windows Electric drive ELTRAL 300 E1for face-fixed fan-light openers 9-31020-01-0-*Technical dataSupply voltage V/Hz 230/50Current consumption A 0.10Protective system IP 54Limit switch includedStarting delay % 100Cross section of cable mm² 4 x 0.75Approx supply cable length mm 1500Stroke mm 30-100Stroke adjusted by factory mm 40Delay per stroke of 50 mm sec. 50Pushing force N 3000Length mm 270Width mm 55Height mm 102
102
FERCO
Application Description Article No.Electric drives Rocker switch »OPEN-STOP-CLOSED«
Unipolar, surface mounting 6-22539Unipolar, concealed mounting 6-22540
Electric drives Control unit ST 980Surface mounting 6-25185for single and central controlwith switches
Electric drives Rocker switch »OPEN-STOP-CLOSED«Surface mounting 6-25220Concealed mounting 6-25219
Electric drives Key-type switch »OPEN-STOP-CLOSED«with half profile cylinderConcealed mounting 6-22992
Electric drives Push-button switch »Lamp-OPEN-CLOSED«Surface mounting 9-33367Concealed mounting 9-33368
Electric drives Push-button switch »OPEN-STOP-CLOSED«Surface mounting 9-33369Concealed mounting 9-33370
Electric drives Push-button switch »OPEN-CLOSED«Surface mounting 9-33371Concealed mounting 9-33372
Push-button switches Protective casingsSide hung door lockable, with cylinder and 3 keysSurface mounting 9-26220Concealed mounting 6-22138-00-0-9
Rocker switches, push-button switches, control unit, protective casings
Accessories for electric drives 230 V
103
FERCO
for aluminium windows
Horizontal and Vertical Pivot fittings
ApplicationRange of applications for UNITAS Horizontal and Vertical Pivot fittings:– Horizontal pivot windows– Vertical pivot windows– Horizontal pivot fan-lights equipped with fan-light openers
DesignsHorizontal Pivot UNITAS 18Compact face fixed pivot made of non-ferrous metal, for sashes up to175 kg. Standard version in monobloc construction, exactly adaptedto the specifications of various profile systems. Sealing with siliconegaskets.
Vertical Pivot UNITAS 88Compact face fixed pivot made of non-ferrous metal, for sashes up to175 kg. Standard version in monobloc construction, exactly adaptedto the specifications of various profile systems. Sealing with siliconegaskets.
HandlesThe handles DIRIGENT-T are provided with cockspur for slit ventilation.Handles DIRIGENT-S without cockspur complete the programme.
Central locking system G.U-FERCO 380 EThe locking mechanism is concealed within the rebate and is operatedby one handle. All locking parts are adapted to the Euro-groove15/20 mm.The locking pins are adjustable. Clampable locking plates, fixed oradjustable, make for an optimized sash pressure. The corner trans-missions are equipped with 4 stainless steel spring blades.
Standard coloursEV 1 Aluminium, natural colourUC 5 Aluminium, dark bronze colour
(fitting parts concealed within the rebate: silver colour)White Aluminium, white lacquer finish RAL 9016, white covers
(fitting parts concealed within the rebate: silver colour)
ApplicationProfile system Fittings Central locking Sash profile Frame profile Alternating profile Standard assembly
system Frame Sash drawingHorizontal Pivot fittingsAlisol 3 UNITAS 18 G.U-FERCO 380 E V 73 202 V 76 783 M 39 116 0.43699.1Doral UNITAS 18 G.U-FERCO 380 E 0.43061.1Eural Series 65 UNITAS 18 G.U-FERCO 380 E 0.43764.1Heroal 040 UNITAS 18 G.U-FERCO 380 E 6422 6407 6406 6406 0.42709.1Metra UNITAS 18 G.U-FERCO 380 E 0.42981.1TSB W 70 UNITAS 18 G.U-FERCO 380 E W 70 14131 W 70 57368 Z 10 65401 Z 10 65401 0.43384.1Vertical Pivot fittingsDoral UNITAS 88 G.U-FERCO 380 E 0.43056.1Eural Series 65 UNITAS 88 G.U-FERCO 380 EHeroal 040 UNITAS 88 G.U-FERCO 380 E 6422 6407 6406 6406 0.43240.1Metra UNITAS 88 G.U-FERCO 380 E 0.42982.1TSB W 70 UNITAS 88 G.U-FERCO 380 E W 70 14131 W 70 57368 Z 10 65401 Z 10 65401 0.43385.1
Fitting arrangement for Horizontal Pivot window Fitting arrangement for Vertical Pivot windowCentral locking system G.U-FERCO 380 E Central locking system G.U-FERCO 380 E
Materials, surface sealing ferGUard* silver andferGUard* yellowThe fitting parts are made of high quality steel, zinc die-casting andaluminium alloys.According to the material they are protected against corrosion by thesurface sealing ferGUard* silver or ferGUard* yellow, aluminium partsare anodized.
Article NumbersExampleArticle No.6-25948-30-0-1
6-25948- - - Part number- -30- - Size- - -L- Left hand assembly- - -R- Right hand assembly- - -0- Usable on both sides- - - -1T Nickel silver- - - -1 F 1/EV 1, natural or silver colour, zinc die-casting
parts galvanized and blue bichromated- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass or brass colour, steel
parts galvanized and yellow bichromated- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black, powder-coated (RAL 9005)- - - -7 White, powder-coated (RAL 9016)- - - -7T White, powder-coated (RAL 9010)- - - -8 Stainless steel oder inox colour- - - -* Surface treatment variable (see price-list)
104
FERCO
Handle DIRIGENT, lockable with key
Handle DIRIGENTlockable with key6-28113-**-0-*
Optional parts
Handle and accessories for Horizontal and Vertical Pivot fittings
Accessories
Automatic 180° locking latch9-20017-00-0-*
Limiting stayK-13393-00-0-1
Drilling jig for horizontaland vertical pivots6-27419-00-0-0
105
FERCOHorizontal Pivot fittings UNITAS 18
according to profile system
Fitting requirements according to profile systemQty Description Alisol 3 Doral Eural Series 65
1 Horizontal pivots UNITAS 18/3 (pair) 6-27212-10-P-* 6-27212-10-P-* 6-27212-10-P-*12 Countersunk screw 9-13133-30-R-0 9-13133-30-R-0 9-13133-25-R-01 Mill-in gear, 90° 6-25948-30-0-1 6-25948-30-0-1 6-25948-30-0-11 Handle DIRIGENT 6-28112-25-0-* 6-25555-30-0-* 6-29188-30-0-*2 Counters. sheet metal screw 4.8 x 60 9-13089-60-0-0 9-13133-40-R-0 9-13133-16-R-02 Corner transmission 6-24529-00-0-1 6-24529-05-0-1 6-24529-00-0-14 Locking pin element 6-24539-00-0-1 6-24539-05-0-1 6-24539-00-0-13 Locking plate, bottom 6-27358-00-0-0 6-24666-00-0-0 6-27358-00-0-03 Locking plate, top G-11071-00-0-1 G-11065-00-0-1 G-11071-00-0-11 Slit locking plate 6-25982-00-0-0 6-25982-00-0-0 6-25982-00-0-0
Optional parts, drilling jigAutomatic 180° locking latch 9-20017-00-0-* 9-20017-00-0-* 9-20017-00-0-*Limiting stay K-13393-00-0-1 K-13393-00-0-1 K-13393-00-0-1Drilling jig for pivots 6-27419-00-0-0 6-27419-00-0-0 6-27419-00-0-0
Fitting requirements according to profile systemQty Description Heroal 040 Metra TSB W 70
1 Horizontal pivots UNITAS 18/3 (pair) 6-30193-00-P-* 6-27212-07-P-* 6-27212-10-P-*12 Countersunk screw 9-13089-09-R-0 9-13133-25-R-01 Bag of screws K-13797-00-0-81 Mill-in gear, 90° 6-25948-30-0-1 6-25948-30-0-1 6-25948-30-0-11 Handle DIRIGENT 6-25558-30-0-* 6-25555-30-0-* 6-28112-25-0-*2 Countersunk sheet metal screw 9-13133-40-R-0 9-13133-16-R-02 Spacer 9-37620-00-0-02 Corner transmission 6-24529-00-0-1 6-24529-00-0-1 6-24529-00-0-14 Locking pin element 6-24539-00-0-1 6-24539-00-0-1 6-24539-00-0-13 Locking plate, bottom 6-24666-00-0-0 6-24666-00-0-0 6-27358-00-0-03 Locking plate, top G-11065-00-0-1 G-11800-00-0-1 G-11800-00-0-11 Slit locking plate 6-25982-00-0-0 6-25982-00-0-0 6-25982-00-0-01 Rod transmission E-13899-00-0-02 Gasket 20 9-35495-01-0-02 Gasket 20 9-35495-02-0-0
Optional parts, drilling jigAutomatic 180° locking latch 9-20017-00-0-* 9-20017-00-0-* 9-20017-00-0-*Limiting stay K-13393-00-0-1 K-13393-00-0-1 K-13393-00-0-1Drilling jig for pivots 9-33687-00-0-0 6-27419-00-0-0 6-27419-00-0-0
Corner transmissionLocking plate
Corner transmissionLocking plate
Mill-in gear, 90° Locking pin element
Slit locking plate Locking plate
Handle DIRIGENTCountersunk sheetmetal screw
Locking pin element
Locking plate
HorizontalpivotUNITAS 18/3
HorizontalpivotUNITAS 18/3
106
FERCOVertical Pivot fittings UNITAS 88
according to profile system
Fitting requirements according to profile systemQty Description Doral Eural Series 65 Heroal 040
1 Vertical pivots UNITAS 88 (pair) 6-27337-10-P-* 6-27337-10-P-* 6-27337-10-P-*14 Countersunk screw 9-13133-30-R-0 9-13133-25-R-01 Bag of screws K-14423-00-0-81 Bag of coupling rod K-14426-01-*-1 K-14426-01-*-1 K-14426-01-*-11 Mill-in gear, 90° 6-25948-30-0-1 6-25948-30-0-1 6-25948-30-0-11 Handle DIRIGENT 6-25555-30-0-* 6-29188-30-0-* 6-29189-30-0-*2 Counters. sheet metal screw 4.8 x 60 9-13133-40-R-0 9-13133-16-R-02 Corner transmission 6-24529-05-0-1 6-24529-00-0-1 6-24529-00-0-14 Locking pin element 6-24539-05-0-1 6-24539-00-0-1 6-24539-00-0-13 Locking plate, bottom 6-24666-00-0-0 6-27358-00-0-0 6-24666-00-0-03 Locking plate, top G-11065-00-0-1 G-11071-00-0-1 G-11065-00-0-11 Slit locking plate 6-25982-00-0-0 6-25982-00-0-0 6-25982-00-0-04 Gasket 9-35493-03-0-0
Optional parts, drilling jigAutomatic 180° locking latch 9-20017-00-0-* 9-20017-00-0-* 9-20017-00-0-*Limiting stay K-13393-00-0-1 K-13393-00-0-1 K-13393-00-0-1Drilling jig for pivots 6-27419-00-0-0 6-27419-00-0-0 6-27419-00-0-0
Fitting requirements according to profile systemQty Description Metra TSB W 70
1 Vertical pivots UNITAS 88 (pair) 6-27337-07-P-* 6-27337-10-P-*14 Countersunk screw 9-13089-09-R-0 9-13133-25-R-01 Bag of screws1 Bag of coupling rod K-14426-01-*-1 K-14426-01-*-11 Mill-in gear, 90° 6-25948-30-0-1 6-25948-30-0-11 Handle DIRIGENT 6-25555-30-0-* 6-28112-25-0-*2 Counters. sheet metal screw 4.8 x 60 9-13133-40-R-0 9-13133-16-R-02 Spacer 9-37620-00-0-02 Corner transmission 6-24529-00-0-1 6-24529-00-0-14 Locking pin element 6-24539-00-0-1 6-24539-00-0-13 Locking plate, bottom 6-24666-00-0-0 6-27358-00-0-03 Locking plate, top G-11800-00-0-1 G-11800-00-0-11 Slit locking plate 6-25982-00-0-0 6-25982-00-0-04 Gasket 9-35493-03-0-0
Optional parts, drilling jigAutomatic 180° locking latch 9-20017-00-0-* 9-20017-00-0-*Limiting stay K-13393-00-0-1 K-13393-00-0-1Drilling jig for pivots 6-27419-00-0-0 6-27419-00-0-0
Locking pin elementLocking plate
Locking pin elementLocking plate
Locking pin elementLocking plate
Mill-in gear, 90°Slit locking plate
Handle DIRIGENTCountersunk sheetmetal screw
Corner transmissionLocking plate
Corner transmissionLocking plate
Vertical pivotUNITAS 88
Vertical pivotUNITAS 88
107
FERCOSmall window fittings
for aluminium tilt and top hung windows
ApplicationRange of applications for G.U small window fittings:– Rebate and cleaning stays for aluminium tilt windows– Expanding stays for aluminium top hung outward opening windows
DesignsG.U Security Stays EURO-SOLIDThese stays for holding the opened sash offer additional safety ofoperation. The Institute for Window Techniques, Rosenheim, highlyrecommends the use of security stays for tilt sashes.The G.U Security Stay EURO-SOLID is a one piece telescopic con-struction. For the various sash heights there are 4 stay sizes.For aluminium sashes profile related versions will be delivered.
Window friction stay EGO-BThis stay is a one piece telescopic construction. For aluminium tilt-turnand side hung sashes profile related versions will be delivered.The model EGO-B operates as a sash brake with restricted openingangle of the sash.
Rebate and cleaning staysThese stays for holding the opened sash offer additional safety ofoperation. The Institute for Window Techniques, Rosenheim, highlyrecommends the use of rebate stays for tilt sashes.
Expanding staysThese stays are installed on top hung outward opening sashes forretaining their open position.
Materials, surface sealing ferGUard* silver andferGUard* yellowThe fitting parts are made of high quality steel, zinc die-casting andaluminium alloys.According to the material they are protected against corrosion by thesurface sealing ferGUard* silver or ferGUard* yellow, aluminium partsare anodized.
AbbreviationsPU Packing unitSH Sash heightSW Sash width
Article NumbersExampleArticle No.6-23470-10-0-1
6-23470- - - Part number- -10- - Size- - -L- Left hand assembly- - -R- Right hand assembly- - -0- Usable on both sides- - - -1T Nickel silver- - - -1 F 1/EV 1, natural or silver colour, zinc die-casting
parts galvanized and blue bichromated- - - -2 F 2/EV 2, champagne colour- - - -3 F 3, brass or brass colour, steel
parts galvanized and yellow bichromated- - - -4 UC 3, medium bronze or medium brown- - - -5 UC 5, dark bronze or dark brown- - - -6 Black, powder-coated (RAL 9005)- - - -7 White, powder-coated (RAL 9016)- - - -7T White, powder-coated (RAL 9010)- - - -8 Stainless steel oder inox colour- - - -* Surface treatment variable (see price-list)
108
FERCO
Application Description Article No.Aluminium tilt windows G.U Security Stay EURO-SOLID
SH VENTUS SH VENTUSF 200/F 300 EVZ 18-M Profile system270- 350 480- 600 Hartmann 52 K-14690-00-0-1351- 500 601- 750 Hartmann 72 K-14696-00-0-1501- 800 751-1000 Hueck K-14702-00-0-1801-1500 1001-1500 MKF TKI 602 K-14708-00-0-1
Schüco Royal S 65SH VENTUS SH VENTUSF 200/F 300 EVZ 18-M Profile system270- 350 480- 600 Wicona K-14691-00-0-1351- 500 601- 750 Wicline 60 K-14697-00-0-1501- 800 751-1000 K-14703-00-0-1801-1500 1001-1500 K-14709-00-0-1SH VENTUS SH VENTUSF 200/F 300 EVZ 18-M Profile system270- 350 480- 600 Akotherm K-14692-00-0-1351- 500 601- 750 Brökelmann Conform K-14698-00-0-1501- 800 751-1000 Erbslöh Ekonal I 70 K-14704-00-0-1801-1500 1001-1500 Heroal Series 30, 40 K-14710-00-0-1
KubalMenziken Alisol 3RedalRemy Claeys EkonalReynolds RT 620Sykon Series 54, 64Thyssen Schulte tsb
VAW
Opening angle incatch position
Opening angle incleaning position
Maximum sash weightaccording to size and quantity of stays
SH VENTUS SH VENTUS Size 1 stay 2 staysF 200/F 300 EVZ 18-M
270- 350 480- 600 01 15 kg 30 kg351- 500 601- 750 02 15 kg 30 kg
501- 800 751-1000 03 30 kg 60 kg801-1500 1001-1500 04 30 kg 60 kg
Complete delivery:Security stay including accessories according to profile system
G.U Security Stay EURO-SOLID
109
FERCO
Application Description Article NoLeft hand operated Right hand operated
Aluminium tilt windows Rebate and cleaning stay No. 30Frame rebate height for tilt sasheswith face fixed fan-light openers275- 350 6-23482-10-L-1 6-23482-10-R-1351- 445 6-23482-21-L-1 6-23482-21-R-1446- 800 6-23482-22-L-1 6-23482-22-R-1801-1100 6-23482-23-L-1 6-23482-23-R-1
No. 30Aluminium tilt windows Rebate and cleaning stay No. 30
Frame rebate height for tilt sasheswith concealed fan-light openers
Max sash weight 275- 385 (only 1 stay usable) 6-23482-10-L-1 6-23482-10-R-1for 1 stay 15 kg 386- 485 (only 1 stay usable) 6-23482-21-L-1 6-23482-21-R-1
486- 600 6-23482-21-L-1 6-23482-21-R-1601- 745 6-23482-22-L-1 6-23482-22-R-1745-1100 6-23482-23-L-1 6-23482-23-R-1
No. 30Aluminium tilt windows Rebate stay No. 23
with hinged arm, length150 5-21020-15-0-3
Rebate stay No. 24with hinged arm, length150 5-21021-15-0-3200 5-21021-20-0-3
No. 23 No. 24Aluminium tilt windows Rebate stay No. 25 Rebate
with hinged arm, length clearance150 15 5-21025-01-0-3150 17 5-21025-02-0-3150 21 5-21025-03-0-3150 28/29 5-21025-04-0-3200 15 5-21025-11-0-3200 17 5-21025-12-0-3200 21 5-21025-13-0-3200 28/29 5-21025-14-0-3
Cleaning stay No. 26 MHEX Allen key locking devicewith hinged arm, length250 5-21029-25-0-3
No. 25 No. 26 M
for aluminium tilt windows
Rebate and cleaning stays
110
FERCO
Application Description Article No.Aluminium tilt windows Rebate stay No. 27
with hinged arm, 1 pairArm length150HEX Allen key locking device (not shown) 2-20176-00-0-3lockable, with plugged cylinder 2-20192-00-0-3Key for plugged cylinder 9-23074
Rebate stay No. 28 Mwith sliding arm, length200 5-21041-20-0-3
No. 27 No. 28 MTop hung outward opening windows Expanding stay No. 32
with hinged arm, 1 pair 2-20165-00-0-3
No. 32
Rebate stays for tilt windows, expanding stay for top hung outward opening windows,window friction stay for tilt-turn and side hung windows
Rebate stays, window friction stay EGO-B
Window friction stay EGO-BDescription Article No.Window friction stay EGO-B for tilt-turn and side hungsashes, with brake function for retaining the sash from 5°to any desired opening position and for restricting theopening of the sash at approx 90° 6-28835-00-0-1
Bag of accessories for EGO-BProfile systemHartmann 52 K-14684-00-0-1Hartmann 72HueckMKF TKI 602Schüco Royal S 65Profile systemWicona K-14685-00-0-1Wicline 60Profile systemAkotherm K-14686-00-0-1Brökelmann ConformErbslöh Ekonal I 70Heroal Series 30, 40KubalMenziken Alisol 3RedalRemy Claeys EkonalReynolds RT 620Sykon Series 54, 64Thyssen Schulte tsbVAW
111
FERCOOverhead door closers OTS 230 and OTS 330
Rack and pinion door closers with tooth drive and scissor action arms
Features and Advantages1. Adjustable power DIN 1 - 4 (according to EN standard)
for OTS 230: 9 - 26 Nmfor OTS 330: 8 - 40 Nmin a single body size.
2. Closing power adjustable on the side; moving of thecloser or the stay arm bracket is not required.
3. Mounting plate provided as standard allowing forplanned pre-mounting in the workshop.
4. Standard fixing positions for all door closers of theOTS range.
5. Problem free fixing on wood, PVC, aluminium or steeldoors by use of the mounting plate with multi-fixingpositions.
6. Concealed colour coded adjustment valves:Closing speed – red valveLatching power – yellow valveAll these adjustments are built in as standard on theOTS 230 and OTS 330. The adjustment of the valvesis from the front, also the latching power adjustmentis made without disconnecting the arms.
7. Thermatic valves provide consistent temperatureindependent closing speed.
8. Fully adjustable upper arm using a notched slidemechanism.
9. Problem free fixing of the arm bracket, as the armis fully detachable.
Technical DescriptionMax door leaf width for internal doors:1100 mm (OTS 230),1250 mm (OTS 330).
Reversible left or right hand.
Standard or transom mounting.
Max door opening and closing angle 180°,provided the building design permits.
Control of the closing from any opening angle.
Safety valve in the closer prevents overloading.
Smartly shaped cover with concealed securityfixing in a choice of colours.
Needle bearing axle.Article No.
Door closer:OTS 230with standard arm K-14734-00-0-*OTS 230 MF-EAwith hold open arm K-14735-00-0-*
Door closer:OTS 330with standard arm K-13379-00-0-*OTS 330 MF-EAwith hold open arm K-13380-00-0-*
112
FERCOOverhead door closer OTS 530
with rack and pinion drive and scissor action arms to DIN 18 263, part 2
Features and Advantages1. Adjustable power 2 - 6 = 15 - 60 Nm
(to DIN EN 1154) in a single body size.
2. Closing power adjustment from the side.
3. Mounting plate provided as standard allowing forplanned pre-mounting in the workshop.
4. Standard fixing positions for all door closers of theOTS range.
5. Problem free fixing on wood, PVC, aluminium or steeldoors by use of the mounting plate with multi-fixingpositions.
6. Concealed colour coded adjustment valves:Closing speed – red valveLatching power – yellow valveDelayed action – blue valveBackcheck – green valve
All these adjustments are built in as standard on theOTS 530. The adjustment of the valves All theseadjustments are built in as standard on the OTS 530.The adjustment of the valvesis from the front, also thelatching power adjustment is made without discon-necting the arms.
7. Thermatic valves provide consistent temperatureindependent closing speed.
8. Fully adjustable upper arm using a notched slidemechanism.
9. Problem free fixing of the arm bracket, as the armis fully detachable.
Technical DescriptionMax door leaf width 1400 mm for standard doors,1280 mm for fire and smoke protection doors.
Reversible left or right hand.
Standard or transom mounting.
Max door opening angle 180°.
Control of the closing from any opening angle.
Safety valves in the closer prevent overloadingin the closing and opening directions.
Smartly shaped cover with concealed securityfixing in a choice of colours.
Needle bearing axle.
Tested and quality surveyed by the research andmaterials testing authority of Stuttgart (FMPA).Survey mark ÜZ-BWU 03-I 17.1.21.
If the OTS is used for fire and smoke protection doors,DIN 18 263, part 2, for door closers with hydraulicdamping should be observed.
FFFFF
113
FERCOOverhead door closer OTS 630
with linear drive and slide channel
Features and Advantages1. Adjustable power 1 - 4 = 9 - 26 Nm
(to DIN EN 1154) in a single body size.
2. Mounting plate provided as standard allowing forplanned pre-mounting in the workshop.
3. Standard fixing positions for all door closers of theOTS range.
4. Problem free fixing on wood, PVC, aluminium or steeldoors by use of the mounting plate with multi-fixingpositions.
5. Concealed colour coded adjustment valves:Closing speed – red valveLatching power – yellow valveAll these adjustments are built in as standard on theOTS 630. The adjustment of the valves is from thefront.
6. Thermatic valves provide consistent temperatureindependent closing speed.
7. Problem free mounting of the slide channel by alocking engagement on the mounting rail.
8. Slide arm with roller in the slide channel presentslittle friction.
Technical DescriptionMax door leaf width 1100 mm.
Reversible left or right hand.
Max door opening and closing angle 180°,provided the building design permits.
Control of the closing from any opening angle.
Safety valves in the closer prevent overloading.
Smartly shaped cover with concealed securityfixing in a choice of colours.
With new self-centering catch mechanism forfixing the cover.Needle bearing axle.
Standard mounting on hinge side, transom mountingopposite to hinge side, standard mounting opposite tohinge side and transom mounting on hinge side.
114
FERCOOverhead door closer OTS 730
with linear drive and slide channel to DIN 18 263, part 2
Technical DescriptionMax door leaf width 1400 mm.Reversible left or right hand.Max door opening and closing angle 180°,provided the building design permits.
Control of the closing from any opening angle.
Safety valves in the closer prevent overloading.
Smartly shaped cover with concealed securityfixing in a choice of colours.With new self-centering catch mechanism forfixing the cover.Needle bearing axle.Standard mounting to DIN 18 263, part 2.Transom mounting opposite to hinge side, standardmounting opposite to hinge side and transom mountingon hinge side may only be applied for fire and smokeprotection doors if these variants are provided for in theofficial authorization.
Tested and quality surveyed by the research andmaterials testing authority of Stuttgart (FMPA).Survey mark ÜZ-BWU 03-I 17.1.19.
If the OTS 730 is used for fire and smoke protectiondoors, DIN 18 263, part 2, for door closers with hydraulicdamping should be observed.
Features and Advantages1. The OTS 730 is tested and quality surveyed to
DIN 18 263, part 2.2. Adjustable power 2 - 6 = 15 - 60 Nm (to DIN EN 1154)
in a single body size.The OTS 730 may be used for:
- Fire protection doors to DIN 18 082- Smoke protection doors to DIN 18 095- Fire protection doors with official authorization for the
installation of door closers to DIN 18 263, part 2.3. Mounting plate provided as standard allowing for
planned pre-mounting in the workshop.4. Standard fixing positions for all door closers of the
OTS range.5. Problem free fixing on wood, PVC, aluminium or steel
doors by use of the mounting plate with multi-fixingpositions.
6. Concealed colour coded adjustment valves:Closing speed – red valveLatching power – yellow valveBackcheck – green valveAll these adjustments are built in as standard on theOTS 730. The adjustment of the valves is from thefront.
7. Thermatic valves provide consistent temperatureindependent closing speed.
8. Problem free mounting of the slide channel by alocking engagement on the mounting rail.
9. Slide arm with roller in the slide channel presentslittle friction.
FFFFF
115
FERCORebate door closers FTS 20 and FTS 24
for concealed installation in the vertical door rebate
Features and Advantages1. Concealed installation – no fittings to tamper with.2. No untidy appearance on the door, the closer
is "invisible".3. Universal application for all door types including
square, sloping, round and featured door heads.4. For timber, PVC and metal doors.5. All functions adjustable from the front:
Closing power approx. 30 Nm (DIN size 3 - 4)Stepless adjustment of closing speedLatching power from approx. 7°.
6. Concealed colour coded control valves:Latching power yellowClosing speed red
7. Thermomatic valves provide consistenttemperature independent closing speed.
Technical DescriptionMax. door leaf width for internal doors:1100 mm (FTS 20),1250 mm (FTS 24).
Improved closing pressure in closed position.Easy opening of the door through a range of openingangles.Smooth operation due to needle bearing pivot.Safety valve in closer.Installed vertically below the top hinge.Reversible for left and right hand doors.Suitable for square edged and over-rebated doors.Anodized aluminium body, zinc plated steel linkage arm.
Article No.Rebate door closer:FTS 20Door thickness min. 30 mmDoor weight max. 80 kgClosing power 5 - 18 Nm K-15144
Rebate door closer:FTS 24Door thickness min. 40 mmDoor weight max. 140 kgClosing power 12 - 30 Nm K-15145
Fixingscrews
Fixingscrews
Fixingscrews
Closing poweradjustment
Red valve:Closing speedadjustment
Yellow valve:Latching poweradjustment
116
FERCO
FERCO
As a specialist manufacturerof hardware and ventilators,Gretsch-Unitas have been,for many years, the brandleader in several productareas.The market acceptability ofthe wide ranging productprogramme of builder’shardware and ventilatorswith up-to-date technologyand design is proved in dailycompetition.
Gretsch-Unitas GmbHBaubeschlägeD-71252 DitzingenPhone +49 7156 301-0Fax +49 7156 301-293www.g-u.de
The BKS name has beensynonymous with securityfor more than eighty years.The traditional Velbertcompany brings provenproducts and an outstandingreputation – earned throughundisputed product quality –to the Gretsch-Unitas Group.
FERCO International is France’slargest and most widely usedbuilder’s hardware supplier.The extensive programme ofmodern hardware is distributedworld wide.
BKS GmbHP.O. Box 10 02 10D-42502 VelbertPhone +49 2051 201-0Fax +49 2051 201-555www.bks.de
FERCO International S.A.F-57401 SarrebourgPhone +33 387 23 31 11Fax +33 387 03 54 06www.ferco.fr
ATS GmbHAutomatik-Tür-SystemeStahlstrasse 8D-33378 Rheda-WiedenbrückPhone +49 5242 9 24-0Fax +49 5242 9 24-100www.atstueren.de
The business range”entrance systems“ enclosesprojection, production,distribution, assembly andservice of automatic doorinstallations.With ATS the G.U Groupextends the supply of systemsolutions for windows,internal and external doorsas well as for façades.
Gretsch-Unitas Group of Companies
Catalogue GBM 06.02 Printed in Germany
Gretsch-Unitas GmbHBaubeschlägeD-71252 DitzingenPhone +49 7156 301-0Fax +49 7156 301-293Internet http://www.g-u.deE-Mail [email protected]
Gretsch-Unitas LtdUnitas House, Quinn CloseCoventry CV3 4LHPhone +44 24 76 21 79 00Fax +44 24 76 21 79 09Internet http://www.g-u.co.ukE-Mail [email protected]
Fittings for narrow stile doors
Door fittings
G.U-Group products for narrow stile doors
4
Project, fire protection and security fittings ES3
Contents
Page 8 Page 16Page 12
RR-Rondo RR-Belcanto
Page 24Page 22Page 20
Push barsPush barsPush bars
Standard protective rosette ES1
Standard contract fittings for narrow stile doors
RR-Belcanto-Panik
Page 26
Touch bar
Page 28
Protective rosette
Page 30 Page 30
Andante-RR Andante-VK
Page 30
Forte-VK
Page 30
Office-VK
5
Stainless steel window handles
Contents
Page 32Page 32
Andante Crescendo
Page 32
Page 32
Office
Dirigent
Page 32
Forte
6
Accessories for contract work
Contents
Page 34 Page 34Page 34
Floor-mounted
door stop I
Wall-mounted
door stopFloor-mounted
door stop II
Door holder
Page 34 Page 34Page 34Page 34
Ladies Directional arrowHandicappedGentlemen
Page 36 Page 36Page 36Page 36
3934 694439333934
7
Fixing accessories
Page 38 Page 41Page 40Page 39
Spindles ScrewsDivided spindles Threaded spindles
Contents
8
Lever model RR-RONDO
Product information
Lever handles available with 8 or 9 mm spindle, fixed backplate with friction washer (BKS differential bearing).The offset cranked door knobs are non-handeClip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3.The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.The vertical lever variant is provided with a detent mechanism to ensure a precise vertical position.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179.The mounting accessories are included in the items supplied (standard sets for door thickness 37 – 42 mm, fire-rated sets for door thickness 52 – 67 mm).For use on escape doors with a divided follower it is necessary to specify the lock position in addition to the door thickness (refer to page 40).
Dimensioned drawings
Knob types Backplate types
Cranked round knob
Cranked ball-type knob
Fire protection
152
ø20
60
36 15
252
135
85
21,5
32 8
242
135
85
21,5
32 8
72 50
50
ø50
90
ø50
36
50
Aluminium F1
151
ø20
60
Stainless steel
9
RR-RONDO – Contract fittings
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 7550 2140
B 7550 2141
B 7550 0240
B 7550 0241
B 7550 4241
B 7550 2130
B 7550 2131
B 7550 0230
B 7550 0231
----
B 7550 2100
B 7550 2101
B 7550 0200
B 7550 0201
----
B 7550 2104
B 7550 2105
B 7550 0204
B 7550 0205
----
B 7550 2106
B 7550 2107
B 7550 0206
B 7550 0207
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC 5
Backplate type
Rosette, square
Rosette oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 7573 2140
B 7573 2141
B 7573 0240
B 7573 0241
B 7573 4241
B 7573 2130
B 7573 2131
B 7573 0230
B 7573 0231
----
B 7573 2100
B 7573 2101
B 7573 0200
B 7573 0201
----
B 7573 2104
B 7573 2105
B 7573 0204
B 7573 0205
----
B 7573 2106
B 7573 2107
B 7573 0206
B 7573 0207
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC 5
Backplate type
Rosette, square Round knob
cranked
Round knob
cranked
Round, cranked
Round knob
cranked
Round knob
cranked
Round, cranked
Rosette oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 7574 2140
B 7574 2141
B 7574 0240
B 7574 0241
B 7574 4241
B 7574 2130
B 7574 2131
B 7574 0230
B 7574 0231
----
B 7574 2100
B 7574 2101
B 7574 0200
B 7574 0201
----
B 7574 2104
B 7574 2105
B 7574 0204
B 7574 0205
----
B 7574 2106
B 7574 2107
B 7574 0206
B 7574 0207
----
Knob model Cylinder bore Stainl. steel matt Brass PVD PVD Aluminium F1 Aluminium whiteAluminium UC 5
Backplate type
Rosette, square
Rosette oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 7551 2140
B 7551 2141
B 7551 0240
B 7551 0241
B 7551 4241
B 7551 2130
B 7551 2131
B 7551 0230
B 7551 0231
----
B 7551 2100
B 7551 2101
B 7551 0200
B 7551 0201
----
B 7551 2104
B 7551 2105
B 7551 0204
B 7551 0205
----
B 7551 2106
B 7551 2107
B 7551 0206
B 7551 0207
----
PC
PC 92
PC 92
PC
PC 92
PC 92
PC
PC 92
PC 92
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC 5
Lever set
9 mm spindle
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Lever set
8 mm spindle
Items with other features must be ordered under item number B 7599 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
PC = profile cylinder
10
RR-RONDO – Fire protection fittings
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Lever set
Entrance set
B 7553 2140
B 7553 2141
B 7553 0240
B 7553 0241
B 7553 4241
B 7553 2130
B 7553 2131
B 7553 0230
B 7553 0231
----
B 7576 2130
B 7576 2131
B 7576 0230
B 7576 0231
----
B 7553 2100
B 7553 2101
B 7553 0200
B 7553 0201
----
B 7576 2100
B 7576 2101
B 7576 0200
B 7576 0201
----
B 7553 2104
B 7553 2105
B 7553 0204
B 7553 0205
----
B 7576 2104
B 7576 2105
B 7576 0204
B 7576 0205
----
B 7553 2106
B 7553 2107
B 7553 0206
B 7553 0207
----
B 7576 2106
B 7576 2107
B 7576 0206
B 7576 0207
----
Round knob
cranked
Round knob
cranked
Round, cranked
PC
PC 92
PC 92
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7576 2140
B 7576 2141
B 7576 0240
B 7576 0241
B 7576 4241
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
B 7590 2340
B 7590 2341
B 7590 0040
B 7590 0041
B 7590 2330
B 7590 2331
B 7590 0030
B 7590 0031
B 7590 2300
B 7590 2301
B 7590 0000
B 7590 0001
B 7590 2304
B 7590 2305
B 7590 0004
B 7590 0005
B 7590 2306
B 7590 2307
B 7590 0006
B 7590 0007
without PC
rosette
without
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium UC5
Turn handle
Aluminium white
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
Dummy plate
Dummy plate
for push bar
B 7500 2040
B 7500 2041
B 7500 0040
B 7500 0041
B 7508 0040
B 7508 0041
B 7508 0030
B 7508 0031
B 7508 0000
B 7508 0001
B 7508 0004
B 7508 0005
B 7508 0006
B 7508 0007
B 7500 2030
B 7500 2031
B 7500 0030
B 7500 0031
B 7500 2000
B 7500 2001
B 7500 0000
B 7500 0001
B 7500 2004
B 7500 2005
B 7500 0004
B 7500 0005
B 7500 2006
B 7500 2007
B 7500 0006
B 7500 0007
without PC
rosette
without
without
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7508 0240
B 7508 0241
B 7508 0230
B 7508 0231
B 7508 0200
B 7508 0201
B 7508 0204
B 7508 0205
B 7508 0206
B 7508 0207
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
B 7510 2140
B 7510 2141
B 7510 0240
B 7510 0241
B 7510 2130
B 7510 2131
B 7510 0230
B 7510 0231
B 7510 2100
B 7510 2101
B 7510 0200
B 7510 0201
B 7510 2104
B 7510 2105
B 7510 0204
B 7510 0205
B 7510 2106
B 7510 2107
B 7510 0206
B 7510 0207
PC
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Half set, inside
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
B 7510 2140
B 7510 2141
B 7514 0240
B 7514 0241
B 7510 2130
B 7510 2131
B 7514 0230
B 7514 0231
B 7510 2100
B 7510 2101
B 7514 0200
B 7514 0201
B 7510 2104
B 7510 2105
B 7514 0204
B 7514 0205
B 7510 2106
B 7510 2107
B 7514 0206
B 7514 0207
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7517 0240
B 7517 0241
B 7517 0230
B 7517 0231
B 7517 0200
B 7517 0201
B 7517 0204
B 7517 0205
B 7517 0206
B 7517 0207
Half set outside
Half set outside
for push bar
Backplate typeType of set
Rosette, square Round knob
cranked
Round knob
cranked
Round knob
cranked
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
B 7501 2140
B 7501 2141
B 7501 0240
B 7501 0241
B 7501 2130
B 7501 2131
B 7501 0230
B 7501 0231
B 7501 2100
B 7501 2101
B 7501 0200
B 7501 0201
B 7501 2104
B 7501 2105
B 7501 0204
B 7501 0205
B 7501 2106
B 7501 2107
B 7501 0206
B 7501 0207
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7504 0240
B 7504 0241
B 7504 0230
B 7504 0231
B 7504 0200
B 7504 0201
B 7504 0204
B 7504 0205
B 7504 0206
B 7504 0207
Half set
Knob backplate
Half set outside
for push bar
Backplate typeType of set
Rosette, square
Rosette, oval
B 7510 2340
B 7510 2341
B 7510 2330
B 7510 2331
B 7510 2300
B 7510 2301
B 7510 2304
B 7510 2305
B 7510 2306
B 7510 2307
Half set,
outside
Rosette
Rosette, square
Rosette, oval
Half set
outside
Half set
interior
B 7514 2340
B 7514 2341
B 7514 2330
B 7514 2331
B 7514 2300
B 7514 2301
B 7514 2304
B 7514 2305
B 7514 2306
B 7514 2307
Half set,
outside
Rosette
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Backplate typeType of set
Rosette, square
Rosette, ovalRosette with CB
B 7598 2140
B 7598 2141
B 7598 2130
B 7598 2131
B 7598 2100
B 7598 2101
B 7598 2104
B 7598 2105
B 7598 2106
B 7598 2107PC
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Backplate typeType of set
Rosette, square
Rosette, oval
Half set
Knob rosette
B 7501 2440
B 7501 2441
B 7501 2430
B 7501 2431
B 7501 2400
B 7501 2401
B 7501 2404
B 7501 2405
B 7501 2406
B 7501 2407
Half set,
outside
Rosette
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Round knob
cranked
PC = profile cylinder
11
RR-RONDO – Fire protection and security fittings ES3
Security fittings ES3
Fire protection fittings ES3
CC 92 B 7451 5341 B 7451 5331 B 7451 5301 ---- B 7451 5305 B 7451 5307
Knob model Cylinder bore Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
CC 92 B 7451 0341 B 7451 0331 B 7451 0301 ---- B 7451 0305 B 7451 0307
Knob model Cylinder bore Stainl. steel matt
Stainl. steel matt
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Round knob
cranked
Items with other features must be ordered under item number B 7599 9999 with precise details according to the following check list:
Backplate typeType of set
Lever set
9 mm spindleOblong plate,
rounded
Backplate typeType of set
Entrance set
9 mm spindleOblong plate,
rounded
Lever set
Entrance set
Lever set
Entrance set
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
Backplate type
CC 92
CC 92
B 7451 5041
B 7451 5141
B 7451 5031
B 7451 5131
B 7451 5001
B 7451 5101
----
----
B 7451 5005
B 7451 5105
B 7451 5007
B 7451 5107
Knob model Cylinder bore Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Lever set
8 mm spindle
Lever set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
Stainl. steel matt
Backplate type
CC 92
CC 92
B 7451 0041
B 7451 0141
B 7451 0031
B 7451 0131
B 7451 0001
B 7451 0101
----
----
B 7451 0005
B 7451 0105
B 7451 0007
B 7451 0107
Knob model Cylinder bore Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Oblong plate,
roundedRound knob
cranked
Round knob
cranked
Oblong plate,
rounded
Stainl. steel matt
CC = cylinder cover
12
Lever modell RR-BELCANTO Panic
Product information
Dimensioned drawings
Knob types Backplate types
Fire protection
Cranked round knob
Cranked ball-type knob
36 15
252
135
85
21,5
32 8
242
135
85
21,5
32 8
72 50
50
ø50
90
ø50
36
50
ø20
45
141
60
Lever handles available with 8 or 9 mm spindle, fixed backplate with friction washer (BKS differential bearing).The offset cranked door knobs are non-handed.Clip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3.The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.The vertical lever variant is provided with a detent mechanism to ensure a precise vertical position.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179.The mounting accessories are included in the items supplied (standard sets for door thickness 37 – 42 mm, fire-rated sets for door thickness 52 – 67 mm).For use on escape doors with a divided follower it is necessary to specify the lock position in addition to the door thickness (refer to page 40).
13
RR-BELCANTO Panic – Contract fittings
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Lever set
8 mm spindle
Items with other features must be ordered under item number B 7599 9999 with precise details according to the following check list:
Lever set
9 mm spindle
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 75BG 2140
B 75BG 2141
B 75BG 0240
B 75BG 0241
B 75BG 4241
PC
PC 92
PC 92
Knob model Cylinder bore
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 75BJ 2140
B 75BJ 2141
B 75BJ 0240
B 75BJ 0241
B 75BJ 4241
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Round knob
cranked
Round knob
cranked
Round, cranked
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 75BH 2140
B 75BH 2141
B 75BH 0240
B 75BH 0241
B 75BH 4241
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Backplate type
Rosette, square Round knob
cranked
Round knob
cranked
Round, cranked
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 75BK 2140
B 75BK 2141
B 75BK 0240
B 75BK 0241
B 75BK 4241
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Stainl. steel matt
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
PC = profile cylinder
14
RR-BELCANTO Panic – Fire protection fittings
Type of set
Turn handle
Lever set
Entrance set
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Half set, inside
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
Dummy plate
Dummy plate
for push bar
without PC
rosette
without
without
PC 92
Knob model Cylinder bore
Backplate typeType of set
Rosette, square
Rosette, ovalRosette with CB
B 7598 2140
B 7598 2141
----
----
----
----
----
----
----
----PC
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Round knob
cranked
Round knob
cranked
Round, cranked
PC
PC 92
PC 92
Knob model Cylinder bore
----
----
Aluminium F1
----
----
----
----
Aluminium F1
----
----
----
---- ----
----
----
Aluminium F1
Backplate typeType of set
Rosette, square
Rosette, oval
Half set
Knob rosette
B 7501 2440
B 7501 2441
----
----
----
----
----
----
Half set, outside
Rosette
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium whiteAluminium UC5
Round knob
cranked
Backplate typeType of set
Rosette, square Round knob
cranked
Round knob
cranked
Round knob
cranked
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
B 7501 2140
B 7501 2141
B 7501 0240
B 7501 0241
----
----
----
----
----
----
----
----
----
----
----
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium whiteAluminium UC5
B 7504 0240
B 7504 0241
----
----
----
----
----
----
Half set
Knob backplate
Half set forpush bar
Backplate typeType of set
Rosette, square
Rosette, oval
B 75BC 2340
B 75BC 2341
----
----
---- ----
----
Half set, outside
Rosette
Rosette, square
Rosette, oval
Half set
outside
Half set
interior
B 75BF 2340
B 75BF 2341
----
----
----
----
----
----
Half set, outside
Rosette
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium whiteAluminium UC5
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
B 75BC 2140
B 75BC 2141
B 75BF 0240
B 75BF 0241
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium UC5
B 75BT 0240
B 75BT 0241
----
----
----
----
----
----
----
----
Half set outside
Half set outsidefor push bar
B 75BC 2140
B 75BC 2141
B 75BC 0240
B 75BC 0241
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Aluminium white
B 7500 2040
B 7500 2041
B 7500 0040
B 7500 0041
B 7508 0040
B 7508 0041
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7508 0240
B 7508 0241
----
----
----
----
----
----
----
----
---- ----
B 75BR 2340
B 75BR 2341
B 75BR 0040
B 75BR 0041
without PC
rosette
without
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 75BI 2140
B 75BI 2141
B 75BI 0240
B 75BI 0241
B 75BI 4241
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC
PC 92
PC 92
Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 75BL 2140
B 75BL 2141
B 75BL 0240
B 75BL 0241
B 75BL 4241
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC = profile cylinder
15
RR-BELCANTO Panic – Fire protection and security fittings ES3
Security fittings ES3
Fire protection fittings ES3
Lever set
Entrance set
Lever set
Entrance set
Items with other features must be ordered under item number B 7599 9999 with precise details according to the following check list:
Backplate type
CC 92
CC 92
B 7451 BD41
B 7451 BE41
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVDType of set
Lever set
8 mm spindle
Lever set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
----
----
----
----
----
----
----
----
Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
CC 92
CC 92
B 7451 BA41
B 7451 BB41
----
----
----
----
----
----
----
----
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Oblong plate,
rounded
Round,
cranked
Round,
cranked
Oblong plate,
rounded
Backplate type
CC 92 B 7451 BF41 ---- ---- ---- ---- ----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Lever set
9 mm spindleOblong plate,
rounded
Backplate type
CC 92 B 7451 BC41 ---- ---- ---- ---- ----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Entrance set
9 mm spindle
Oblong plate,
rounded
Round,
cranked
CC = cylinder cover
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
16
Lever model RR-BELCANTO
Product information
Dimensioned drawings
Knob types Backplate types
Fire protection
32 8
72 50
50
ø50
90
ø50
36
50
135
ø20
60
Cranked round knob
Cranked ball-type knob
36 15
252
135
85
21,5
32 8
242
135
85
21,5
Lever handles available with 8 or 9 mm spindle, fixed backplate with friction washer (BKS differential bearing).The offset cranked door knobs are non-handed.Clip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3.The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179.The mounting accessories are included in the items supplied (standard sets for door thickness 37 – 42 mm, fire-rated sets for door thickness 52 – 67 mm).
17
RR-BELCANTO – Contract fittings
Lever set
9 mm spindle
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Lever set
8 mm spindle
Items with other features must be ordered under item number B 7599 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
PC = profile cylinder
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
PC
PC 92
PC 92
Knob model Cylinder bore
Rosette, square Round knob
cranked
Round knob
cranked
Round, cranked
Round knob
cranked
Round knob
cranked
Round, cranked
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 7584 2140
B 7584 2141
B 7584 0240
B 7584 0241
B 7584 4241
B 7584 2130
B 7584 2131
B 7584 0230
B 7584 0231
----
B 7584 2100
B 7584 2101
B 7584 0200
B 7584 0201
----
B 7584 2104
B 7584 2105
B 7584 0204
B 7584 0205
----
B 7584 2106
B 7584 2107
B 7584 0206
B 7584 0207
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 7560 2140
B 7560 2141
B 7560 0240
B 7560 0241
B 7560 4241
B 7560 2130
B 7560 2131
B 7560 0230
B 7560 0231
----
B 7560 2100
B 7560 2101
B 7560 0200
B 7560 0201
----
B 7560 2104
B 7560 2105
B 7560 0204
B 7560 0205
----
B 7560 2106
B 7560 2107
B 7560 0206
B 7560 0207
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7575 2106
B 7575 2107
B 7575 0206
B 7575 0207
----
Aluminium white
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
B 7561 2140
B 7561 2141
B 7561 0240
B 7561 0241
B 7561 4241
B 7561 2130
B 7561 2131
B 7561 0230
B 7561 0231
----
B 7561 2100
B 7561 2101
B 7561 0200
B 7561 0201
----
B 7561 2104
B 7561 2105
B 7561 0204
B 7561 0205
----
B 7561 2106
B 7561 2107
B 7561 0206
B 7561 0207
----
PC
PC 92
PC 92
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7575 2140
B 7575 2141
B 7575 0240
B 7575 0241
B 7575 4241
B 7575 2130
B 7575 2131
B 7575 0230
B 7575 0231
----
B 7575 2100
B 7575 2101
B 7575 0200
B 7575 0201
----
B 7575 2104
B 7575 2105
B 7575 0204
B 7575 0205
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium UC5
Backplate type
18
RR-BELCANTO – Fire protection fittings
Backplate typeType of set
Rosette, square
Rosette, ovalRosette with CB
B 7598 2140
B 7598 2141
B 7598 2130
B 7598 2131
B 7598 2100
B 7598 2101
B 7598 2104
B 7598 2105
B 7598 2106
B 7598 2107PC
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Backplate typeType of set
Lever set
Entrance set
B 7563 2106
B 7563 2107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Type of set
Half set, inside
Type of set
Half set outside
Half set outside
for push bar
Backplate typeType of set
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Half set
Knob backplate
Type of set
Dummy plate
Dummy plate
for push bar
Backplate typeType of set
Rosette, square
Rosette, oval
Rosette, square
Rosette, oval
Half set
outside
Half set
interior
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
B 7533 2140
B 7533 2141
B 7533 0240
B 7533 0241
PC
PC 92
Knob model Cylinder bore Stainl. steel matt
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Round knob
cranked
Round knob
cranked
Backplate typeType of set
Rosette, square
Rosette, oval
Half set
Knob rosette
B 7501 2440
B 7501 2441
B 7501 2430
B 7501 2431
B 7501 2400
B 7501 2401
B 7501 2404
B 7501 2405
B 7501 2406
B 7501 2407
without PC
rosette
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
Round knob
cranked
PC
PC 92
B 7533 2340
B 7533 2341
B 7533 2330
B 7533 2331
B 7533 2300
B 7533 2301
B 7533 2304
B 7533 2305
B 7533 2306
B 7533 2307
without PC
rosette
B 7537 2340
B 7537 2341
B 7537 2330
B 7537 2331
B 7537 2300
B 7537 2301
B 7537 2304
B 7537 2305
B 7537 2306
B 7537 2307
without PC
rosette
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Round knob
cranked
Round knob
cranked
Round, cranked
Backplate type
Rosette, square
Rosette, oval
Oblong plate, square
Oblong plate, rounded
Knob model
PC
PC 92
PC 92
PC
PC 92
PC 92
Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7533 2140
B 7533 2141
B 7537 0240
B 7537 0241
B 7533 2130
B 7533 2131
B 7537 0230
B 7537 0231
B 7533 2100
B 7533 2101
B 7537 0200
B 7537 0201
B 7533 2104
B 7533 2105
B 7537 0204
B 7537 0205
B 7533 2106
B 7533 2107
B 7537 0206
B 7537 0207
PC
PC 92
PC 92----
----
----
----
----
----
----
----
----
----
B 7501 2140
B 7501 2141
B 7501 0240
B 7501 0241
B 7501 2130
B 7501 2131
B 7501 0230
B 7501 0231
B 7501 2100
B 7501 2101
B 7501 0200
B 7501 0201
B 7501 2104
B 7501 2105
B 7501 0204
B 7501 0205
B 7501 2106
B 7501 2107
B 7501 0206
B 7501 0207
Oblong plate, square
Oblong plate, rounded
Oblong plate, square
Oblong plate, rounded
without PC
rosette
without
without
PC 92
Stainl. steel matt Brass PVD Aluminium F1 Aluminium whiteAluminium UC5
B 7563 2140
B 7563 2141
B 7563 0240
B 7563 0241
B 7563 4241
B 7563 2130
B 7563 2131
B 7563 0230
B 7563 0231
----
B 7586 2130
B 7586 2131
B 7586 0230
B 7586 0231
----
B 7563 2100
B 7563 2101
B 7563 0200
B 7563 0201
----
B 7586 2100
B 7586 2101
B 7586 0200
B 7586 0201
----
B 7563 2104
B 7563 2105
B 7563 0204
B 7563 0205
----
B 7586 2104
B 7586 2105
B 7586 0204
B 7586 0205
----
B 7563 0206
B 7563 0207
----
B 7586 2106
B 7586 2107
B 7586 0206
B 7586 0207
----
B 7586 2140
B 7586 2141
B 7586 0240
B 7586 0241
B 7586 4241
B 7533 2130
B 7533 2131
B 7533 0230
B 7533 0231
B 7533 2100
B 7533 2101
B 7533 0200
B 7533 0201
B 7533 2104
B 7533 2105
B 7533 0204
B 7533 0205
B 7533 2106
B 7533 2107
B 7533 0206
B 7533 0207
B 7500 2040
B 7500 2041
B 7500 0040
B 7500 0041
B 7508 0040
B 7508 0041
B 7508 0030
B 7508 0031
B 7508 0000
B 7508 0001
B 7508 0004
B 7508 0005
B 7508 0006
B 7508 0007
B 7500 2030
B 7500 2031
B 7500 0030
B 7500 0031
B 7500 2000
B 7500 2001
B 7500 0000
B 7500 0001
B 7500 2004
B 7500 2005
B 7500 0004
B 7500 0005
B 7500 2006
B 7500 2007
B 7500 0006
B 7500 0007
Cylinder bore
B 7508 0240
B 7508 0241
B 7508 0230
B 7508 0231
B 7508 0200
B 7508 0201
B 7508 0204
B 7508 0205
B 7508 0206
B 7508 0207
PC = profile cylinder
19
RR-BELCANTO – Fire protection and security fittings ES3
Security fittings ES3
Fire protection fittings ES3
Lever set
Entrance set
Lever set
Entrance set
Items with other features must be ordered under item number B 7599 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
Backplate type
CC 92
CC 92
B 7451 6041
B 7451 6141
B 7451 6031
B 7451 6131
B 7451 6001
B 7451 6101
----
----
B 7451 6005
B 7451 6105
B 7451 6007
B 7451 6107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Lever set
8 mm spindle
Lever set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 92 B 7451 1041
B 7451 1141
B 7451 1031
B 7451 1131
B 7451 1001
B 7451 1101
----
----
B 7451 1005
B 7451 1105
B 7451 1007
B 7451 1107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Oblong plate,
roundedRound, cranked
Round, crankedOblong plate,
roundedCC 92
Backplate type
CC 92 B 7451 6441 B 7451 6431 B 7451 6401 ---- B 7451 6405 B 7451 6407
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Lever set
9 mm spindle
Oblong plate,
rounded
Backplate type
CC 92 B 7451 1441 B 7451 1431 B 7451 1401 ---- B 7451 1405 B 7451 1407
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Entrance set
9 mm spindleOblong plate,
rounded Round, cranked
CC = cylinder cover
Dimension A
20
Push bars for medium-weight escape doors to EN 1125
Product information
Dimensioned drawings
PVC
BKS push bar for the use on smoke control, fire control and escape doors to DIN 18273 + DIN 4102 + EN 1634; with integrated
gear; 9 mm spindle. Approval to EN 1125 only in combination with approved BKS locks. With retaining spring;
suitable for medium-weight active and passive door leaves up to 200 kg. Cylinder bore: PC 72 mm, PC 92 mm (PC = profile cylinder), or without cylinder bore. Non-handed (DIN rh and lh usable) Finish:
– Casing + lever arm of PVC, black matt; cross bar of aluminium F1 With mounting accessories, intended for assembly with BKS short backplates (PC 72 mm) or BKS narrow stile long backplates (PC 92 mm). The cross bar must be ordered separately (refer to door widths on page 21).
21
Push bar to EN 1125
Push bars for narrow stile doors
PVC black, cross bar aluminium F1Cylinder bore
dummy B 7100 4100
Max. door width
810 mm
885 mm
935 mm
1060 mm
1250 mm
1600 mm
B 7100 4270
B 7100 4271
B 7100 4272
B 7100 4273
B 7100 4274
B 7100 4275
Aluminium F1
PC = profile cylinder
Type of set
Cross bar
Cross bar length
710 mm
785 mm
835 mm
960 mm
1150 mm
1500 mm
Type of set
Passive leaf without
Cross bar
Cylinder boreType of set
Active leaf without
cross bar
PC 92 B 7192 4100
PC 72 B 7172 4100
PVC black, cross bar aluminium F1
72/9
2
x - 120 = Length of bar
x 131
10
33
207
33, 7 Dimension A:PC 72 = 112 mmPC 92 = 135 mm
72
/92
20
6
33,7
33
124
x
x - 120 = Length of bar
Dimension A:PC 72 = 112 mmPC 92 = 135 mm
1
1
2
2
1
22
Push bars for heavy-weight escape doors to EN 1125
Stainless steel
Aluminium
Product information
BKS push bar for the use on smoke control, fire control and escape doors to DIN 18273 + DIN 4102 + EN 1634; with integrated
stainless steel gear; 9 mm spindle. Approval to EN 1125 only in combination with approved BKS locks. With retaining spring;
suitable for heavy-weight active and passive door leaves up to 300 kg. Cylinder bore: PC 72 mm, PC 92 mm (PC = profile cylinder), or without cylinder bore. Non-handed (DIN rh and lh usable) Finish:
– Aluminium, F1
– Stainless steel brushed matt With mounting accessories, intended for assembly with BKS short backplates (PC 72 mm) or BKS narrow stile long backplates (PC 92 mm). The cross bar must be ordered separately (refer to door widths on page 23).Stainless steel V4A version on request.
Dimensioned drawings
23
Push bars for narrow stile doors
Push bar to EN 1125
Type of set
Active leaf without
cross bar
Cross bar lengthType of set Max. door width
Cross bar
710 mm
785 mm
835 mm
960 mm
1150 mm
1500 mm
810 mm
885 mm
935 mm
1060 mm
1250 mm
1600 mm
B 7100 4210
B 7100 4211
B 7100 4212
B 7100 4213
B 7100 4204
B 7100 4205
Stainl. steel matt
Cylinder boreType of set
Active leaf without
cross bar
PC 72 B 7172 7141
PC 92 B 7192 7141
Stainl. steel matt
Cylinder boreType of set
Passive leaf without
Cross bardummy
PC = profile cylinder
Cylinder bore
PC 92 B 7192 5141 B 7192 5101
PC 72 B 7172 5141 B 7172 5101
Aluminium F1Stainl. steel matt
B 7100 5141 B 7100 5101
Aluminium F1Stainl. steel mattCylinder boreType of set
Passive leaf without
Cross bardummy
B 7100 7141
Stainl. steel matt
B 7100 4270
B 7100 4271
B 7100 4272
B 7100 4273
B 7100 4274
B 7100 4275
Aluminium F1
Length of bar
92
,5
33,7
33
124
x
x - 120 = Length of bar
1 2
1
2
1
24
Push bars for escape doors to EN 1125
Stainless steel
Aluminium
Product information
BKS push bar for the use on smoke control, fire control and escape doors to DIN 18273 + DIN 4102 + EN 1634; with integrated
stainless steel gear; 9 mm spindle. Approval to EN 1125 only in combination with approved BKS locks. With retaining spring;
suitable for heavy-weight active and passive door leaves up to 300 kg. Non-handed (DIN rh and lh usable) Finish:
– Aluminium, F1
– Stainless steel brushed matt With mounting accessories, intended for assembly with BKS short backplates (PC 72 mm) or BKS narrow stile long backplates (PC 92 mm). The cross bar must be ordered separately (refer to door widths on page 25).Stainless steel V4A version on request.
Dimensioned drawings
7
67
32 7
67
32
7
67
32
25
Push bar to EN 1125
Push bars for narrow stile doors
Cylinder boreType of set
Active leaf / passive leaf
without cross barB 7100 6141 B 7100 6101
Aluminium F1Stainl. steel matt
Type of set
Cross bar
B 7100 4210
B 7100 4211
B 7100 4212
B 7100 4213
B 7100 4204
B 7100 4205
B 7100 4270
B 7100 4271
B 7100 4272
B 7100 4273
B 7100 4274
B 7100 4275
Aluminium F1Stainl. steel matt
Type of set
Rosette, square
Rosette, ovalRosette with CB
Backplate type
B 7100 8141
Stainl. steel matt Cylinder boreType of set
Active leaf / passive leaf
without cross bar
Cross bar length Max. door width
710 mm
785 mm
835 mm
960 mm
1150 mm
1500 mm
810 mm
885 mm
935 mm
1060 mm
1250 mm
1600 mm
B 7598 2140
B 7598 2141
B 7598 2100
B 7598 2101PC
Cylinder bore Stainl. steel matt Aluminium F1
PC = profile cylinder
3217.5 X
81
99
.5
21
.5
33
21
.5
26
Touch bar for escape doors to EN 1125
Product information
BKS touch bar for the use on smoke control, fire control and escape doors to DIN 18273 + DIN 4102 + EN 1634, with integrated
gear; 9 mm spindle. Approval to EN 1125 only in combination with approved BKS locks. With retaining spring; suitable for active and
passive door leaves. Non-handed (DIN rh / lh usable) Finish:
– Aluminium, F1
– Stainless steel Including mounting accessories
Dimensioned drawings
7
67
27
Touch bar to EN 1125
Touch bar for narrow stile doors
Cylinder boreType of set
Active leaf/passive leaf
DIN lh/rh
808 mm
1158 mm
1458 mm
B 7150 0000
B 7150 0001
B 7150 0002
Aluminium F1Stainless steel
B 7150 2000
B 7150 2001
B 7150 2002
Dim "x"
Type of set
Rosette, square
Rosette, ovalRosette with CB PC
Cylinder boreBackplate type
PC = profile cylinder
B 7598 2140
B 7598 2141
B 7598 2100
B 7598 2101
Stainl. steel matt Aluminium F1
28
Dimensioned drawings
Security rosette for narrow stile doors
Product information
Security rosette for narrow stile doors to DIN 18257 – ES1.Lever handles available with 8 or 9 mm spindle; fixed backplate with friction washer (BKS differential bearing).The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm. Mounting accessories for door thicknesses of 54 – 69 mm are included in the items supplied. Also available as fire-rated version according to DIN 18273.
135
ø20
60
152
ø20
60
32242 21,5
135
85
836 15
135
21,5
137,5
ø20
45
141
60
29
Security rosette for narrow stile doors
Items with other features must be ordered under item number B 7599 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
CC = cylinder cover
RR-Belcanto
9 mm B 7481 7941
B 7480 7941
Lever model Cylinder bore
CC 92
CC 72
B 7481 7901
B 7480 7901
B 7481 7905
B 7480 7905
B 7481 7907
B 7480 7907
Aluminium F1 Aluminium white Aluminium UC5Stainl. steel matt
RR-Rondo
9 mm B 7481 7141
B 7480 7141
Lever model Cylinder bore
CC 92
CC 72
B 7481 7101
B 7480 7101
B 7481 7105
B 7480 7105
B 7481 7107
B 7480 7107
Aluminium F1 Aluminium white Aluminium UC5Stainl. steel matt
RR-Belcanto Panic
9 mm B 7481 BI41
B 7480 BI41
Lever model Cylinder bore
CC 92
CC 72
----
----
----
----
----
----
Aluminium F1 Aluminium white Aluminium UC5Stainl. steel matt
30
Standard contract fittings for narrow stile doors
Product information
Lever handles available with 8 or 9 mm spindle; fixed backplate with friction washer; with retaining spring. With 9 mm spindle approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179. The cranked door knobs are non-handed. Clip-on cover rosette. For mounting accessories refer to page 38 et seq.
Dimensioned drawings
Knob types
Cranked round knob
50
ø50
90
151
ø21
60
32 7
67
32 12
67
ø50
36
50
Cranked ball-type knob
179
ø21
86
169
ø21
65
169
ø21
86
31
Standard contract fittings for narrow stile doors
Andante-RR
Andante-VK
Forte-VK
Office-VK
Ball-type, cranked
Round, cranked
PC rosette
CH-RC rosette
Dummy rosette
Rosette, ovalKnob lever
8 mm
1 pieceB 7295 0004
20 piece
Rosette, ovalKnob lever
9 mm fire-rated
1 pieceB 7295 0005
20 piece
Rosette, oval Fixed pull1 piece
B 7295 000620 piece
Handle typeBackplate type Packing unit Stainl. steel matt
Rosette, oval Fixed pull1 piece
B 7295 000720 piece
Handle typeBackplate type Packing unit Stainl. steel matt
Rosette, oval
Rosette, oval
Rosette, oval
PC1 piece
B 7295 001050 piece
CH-RC1 piece
B 7295 001150 piece
without1 piece
B 7295 001250 piece
Cylinder boreBackplate type Packing unit Stainl. steel matt
Cylinder boreBackplate type Packing unit Stainl. steel matt
Cylinder boreBackplate type Packing unit Stainl. steel matt
Rosette, oval1 piece
1 piece
Square spindleBackplate type Packing unit Stainl. steel matt
8 mm
9 mm fire-rated
B 7295 0000
B 7295 0001
Rosette, oval1 piece
1 piece
Square spindleBackplate type Packing unit Stainl. steel matt
8 mm
9 mm fire-rated
B 7295 0018
B 7295 0015
Rosette, oval1 piece
1 piece
Square spindleBackplate type Packing unit Stainl. steel matt
8 mm
9 mm fire-rated
B 7295 0019
B 7295 0016
Rosette, oval1 piece
1 piece
Square spindleBackplate type Packing unit Stainl. steel matt
8 mm
9 mm fire-rated
B 7295 0017
B 7295 0020
PC = profile cylinder CH-RC = Swiss round cylinder
32
Stainless steel window handles
Product information
Stainless steel window handles 90 degree detent 10 mm positioning plugs (adapter for 12 mm on request) 7 mm spindle protruding 30 mm Clip-on cover rosette, for multiple assembly
Dimensioned drawings
FORTE
CRESCENDO ANDANTE DIRIGENT
OFFICE
ø21
126
60
12043 2
0140
65
ø21
125
56
32
12
70
ø21
141
60
33
Stainless steel window handles
Forte
Office
Dirigent
Crescendo
Andante
B 7290 6016 B 7290 6017
Stainl. steel matt Stainl. steel polished
B 7290 6008 B 7290 6009
Stainl. steel matt
B 7290 6000 B 7290 6001
Stainl. steel matt
Stainl. steel polished
Stainl. steel polished
Stainl. steel polished
Rosette design
Rosette, oval
Rosette design
Rosette, oval
Rosette design
Rosette, oval
----
Stainl. steel polished
B 7290 6018
Rosette design
Rosette, oval
Stainl. steel matt
B 7290 6019 ----
Rosette design
Rosette, oval
Stainl. steel matt
30
40
100
100
38
38
ø65
10
38
38
ø65
15
ø19
ø28
ø28
ø28
3106
76
46
3
3
ø19
ø19
25
38
36
ø62
34
Accessories for contract work
Product information
Reference signs:
– Stainless steel
– Black print
– Adhesive strip on the back
Floor / wall-mounted door stops:
– Stainless steel
– With mounting accessories
– Spacer plates for type II as an option
Dimensioned drawings
Floor-mounted
door stop I
Floor-mounted
door stop IIWall-mounted door stop
Ladies Gentlemen Handicapped Directional arrow
Wandstopper
35
Accessories for contract work
Floor-mounted door stop I
Variant
40 x 30 mm B 7122 0040
Stainl. steel matt
Floor-mounted door stop II
Variant
---- B 7122 0000
Stainl. steel matt
Spacer plate for floor-mounted door stop II
Wall-mounted door stop
Ladies
Variant
Ladies B 7121 1040
Stainl. steel matt
Gentlemen
Variant
Gentlemen B 7121 2040
Stainl. steel matt
Handicapped
Variant
Handicapped B 7121 4040
Stainl. steel matt
Directional arrow
Variant
Directional arrow B 7121 3040
Stainl. steel matt
Variant
19 mm x 46 mm
19 mm x 76 mm
19 mm x 106 mm
B 7122 0005
B 7122 0006
B 7122 0007
Stainl. steel matt
Variant
10 mm B 7122 0001
15 mm B 7122 0002
black
36
Door holder
Product information
Door holders 3934 / 3933 to be attached to the door leaf:
– Type 3934 large with 100 mm travel
– Type 3934 medium with 30 mm travel
– Type 3933 small with 30 mm travel
Dimensioned drawings
3934 large
3934 medium3933 small
6944
96
80
56
36
20
90
124,5
26,5
27
40
182
330
85
55
40
27
1801
33
40
37
Door holder
B 3934 0101 B 3934 0137 B 3934 0139----3934 medium
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 3933 0101 B 3933 0137 B 3933 0139----3933 small
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 6944 0007 B 6944 0009 ----B 6944 00046944
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 3934 0190 B 3934 0115 B 3934 0117----3934 large
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Door thickness min. 23 min. 23
Door thickness + 23 + 23 = spindle length
X min. 23
X + 23 = spindle length
38
Fixing accessories
Specification clause
BKS spindle consisting of:
8 / 8.5 / 9 / 10 mm square spindle with special spot-faced surfaces providing a non-loosening connection with the fittings.
Dimension L:.................
Spindles
Spindle length L
mm
100
115
130
145
50
65
70
80
90
100
115
130
145
160
100
115
130
145
Square spindle
mm
8
8
8
8
9
9
9
9
9
9
9
9
9
9
10
10
10
10
Door thickness
mm
37 – 52
52 – 67
67 – 82
82 – 97
--
--
--
17 – 27
27 – 37
37 – 52
52 – 67
67 – 82
82 – 97
97 – 112
37 – 52
52 – 67
67 – 82
82 – 97
Order number
B 7644 0800
B 7644 0801
B 7644 0802
B 7644 0803
B 7644 0908
B 7644 0907
B 7644 0909
B 7644 0905
B 7644 0906
B 7644 0900
B 7644 0901
B 7644 0902
B 7644 0903
B 7644 0904
B 7644 1000
B 7644 1001
B 7644 1002
B 7644 1003
Calculation of spindle length for single-sided
screw attachment
Calculation of spindle length
Note: Spindles for panic bars require a deduction
15 mm from the lengths specified below!
Spindle length L
mm
30
35
40
45
48
55
65
70
Square spindle
mm
9
9
9
9
9
9
9
9
Order number
B 7676 0447
B 7676 0448
B 7676 0449
B 7676 0450
B 7676 0451
B 7676 0452
B 7676 0453
B 7676 0454
Entrance set
Push bar
15 min. 23 Door thickness (DT)
15 max. 10
Touch bar 15 min. 20
max. 26
Door thickness (DT)
Door thickness (DT)
39
Specification clause
BKS threaded spindle consisting of:
8 / 8.5 / 9 / 10 mm square spindle with special spot-faced surfaces providing a non-loosening connection with the fittings; with M8 thread
for BKS entrance sets.
Dimension L:.................
Spindle length L
mm
75
85
95
105
115
135
50
60
70
75
85
95
105
115
135
75
85
95
105
115
135
Square spindle
mm
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
10
10
10
10
10
10
Door thickness
mm
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 107
--
--
--
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 107
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 107
Order number
B 7630 0801
B 7630 0802
B 7630 0803
B 7630 0804
B 7630 0805
B 7630 0806
B 7630 0906
B 7630 0907
B 7630 0900
B 7630 0901
B 7630 0902
B 7630 0903
B 7630 0904
B 7630 0905
B 7630 0908
B 7630 1001
B 7630 1002
B 7630 1003
B 7630 1004
B 7630 1005
B 7630 1006
Calculation of spindle length
Note: Threaded spindles for panic bars require
a deduction of 15 mm from the lengths
specified below!
Fixing accessories
Threaded spindles
X (LI=inside) Y (LO=outside)
DTI DTO min. 23 min. 23 Lever set
Push bar DTI DTO max. 10 min. 23
DTI + 23 = length inside part (LI)DTO + 23 = length outside part (LO)
DTI DTO min. 20 min. 23 Touch bar max. 26
40
Fixing accessories
Divided spindles for escape door fittings
Note: Fixing elements and the fitting set must be consi-
dered as a unit according to DIN 18273. Therefore,
only BKS spindles and screws must be used for
BKS fittings on fire control, smoke control, and
escape doors!
Lever set
DTI
18 – 23
23 – 28
28 – 33
33 – 38
38 – 43
43 – 48
48 – 53
53 – 58
DTO
45
50
55
60
65
70
75
80
18 – 23
50
B 7676 0019
B 7676 0044
B 7676 0057
B 7676 0062
B 7676 0069
B 7676 0074
B 7676 0081
B 7676 0086
23 – 28
55
B 7676 0038
B 7676 0020
B 7676 0058
B 7676 0063
B 7676 0070
B 7676 0075
B 7676 0082
B 7676 0088
28 – 33
60
B 7676 0039
B 7676 0045
B 7676 0003
B 7676 0064
B 7676 0014
B 7676 0076
B 7676 0016
B 7676 0090
33 – 38
65
B 7676 0026
B 7676 0046
B 7676 0059
B 7676 0021
B 7676 0071
B 7676 0077
B 7676 0083
B 7676 0092
38 – 43
70
B 7676 0011
B 7676 0047
B 7676 0012
B 7676 0065
B 7676 0004
B 7676 0078
B 7676 0017
B 7676 0095
43 – 48
75
B 7676 0040
B 7676 0027
B 7676 0060
B 7676 0066
B 7676 0072
B 7676 0022
B 7676 0084
B 7676 0097
48 – 53
80
B 7676 0002
B 7676 0028
B 7676 0013
B 7676 0067
B 7676 0015
B 7676 0094
B 7676 0005
B 7676 0106
53 – 58
85
B 7676 0085
B 7676 0087
B 7676 0089
B 7676 0091
B 7676 0093
B 7676 0096
B 7676 0105
B 7676 0098
LO
LI
Specification clause
BKS divided spindle for BKS escape door fittings in combination with divided followers in panic locks, consisting of:
Outer part of spindle / inner part of spindle, and fixing screw.
9 mm square spindle with special spot-faced surfaces providing a non-loosening connection with the fittings.
Fixing screw with anti-twist safeguard.
Spindles halves are marked with embossed letters (I=inside, A=outside)
Dim LI (length inside): ......... / Dim LO (length outside): .........
Lever half set / Push bar / Touch bar
LI
25
30
35
40
45
50
55
60
65
70
B 7676 0390
B 7676 0309
B 7676 0319
B 7676 0329
B 7676 0339
B 7676 0349
B 7676 0359
B 7676 0369
B 7676 0379
B 7676 0389
B 7676 0391
B 7676 0300
B 7676 0310
B 7676 0320
B 7676 0330
B 7676 0340
B 7676 0350
B 7676 0360
B 7676 0370
B 7676 0380
B 7676 0392
B 7676 0301
B 7676 0311
B 7676 0321
B 7676 0331
B 7676 0341
B 7676 0351
B 7676 0361
B 7676 0371
B 7676 0381
B 7676 0393
B 7676 0302
B 7676 0312
B 7676 0322
B 7676 0332
B 7676 0342
B 7676 0352
B 7676 0362
B 7676 0372
B 7676 0382
B 7676 0394
B 7676 0303
B 7676 0313
B 7676 0323
B 7676 0333
B 7676 0343
B 7676 0353
B 7676 0363
B 7676 0373
B 7676 0383
B 7676 0395
B 7676 0304
B 7676 0314
B 7676 0324
B 7676 0334
B 7676 0344
B 7676 0354
B 7676 0364
B 7676 0374
B 7676 0384
B 7676 0396
B 7676 0305
B 7676 0315
B 7676 0325
B 7676 0335
B 7676 0345
B 7676 0355
B 7676 0365
B 7676 0375
B 7676 0385
B 7676 0397
B 7676 0306
B 7676 0316
B 7676 0326
B 7676 0336
B 7676 0346
B 7676 0356
B 7676 0366
B 7676 0376
B 7676 0386
B 7676 0398
B 7676 0307
B 7676 0317
B 7676 0327
B 7676 0337
B 7676 0347
B 7676 0357
B 7676 0367
B 7676 0377
B 7676 0387
B 7676 0399
B 7676 0308
B 7676 0318
B 7676 0328
B 7676 0338
B 7676 0348
B 7676 0358
B 7676 0368
B 7676 0378
B 7676 0388
25 30 35 40 45 50 55 60 65 70 LO
Calculation of spindle length
41
Fixing accessories
Steel fixing screws
Specification clause
Fixing screws for BKS fittings consisting of:
Phillips countersunk-head screw M5 according to ISO 7047, galvanized and chrome-plated iron
Door thickness:.................... Screw length:....................
Specification clause
Fixing screws for BKS specialty stainless steel fittings with visible screw connections, consisting of:
Phillips countersunk-head screw M5 according to ISO 7047, stainless steel
Door thickness:.................... Screw length:....................
Stainless steel fixing screws
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Description Door thickness Description
Description
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Description
M5 x 40
M5 x 50
M5 x 60
M5 x 70
M5 x 80
M5 x 90
M5 x 100
Door thickness
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 97
97 – 107
Description
B 7660 0100
B 7660 0101
B 7660 0102
B 7660 0103
B 7660 0104
B 7660 0105
B 7660 0106
Mounting accessories for security fittings ES3
Description
Mounting accessories
Mounting accessories
Mounting accessories
Mounting accessories
Mounting accessories
Door thickness
39 – 54
54 – 69
69 – 84
84 – 94
94 – 114
Description
B 7660 0070
B 7660 0071
B 7660 0072
B 7660 0073
B 7660 0078
Description
M5 x 35
M5 x 40
M5 x 50
M5 x 60
M5 x 70
M5 x 80
M5 x 90
M5 x 100
37 – 42
42 – 52
52 – 62
62 – 72
72 – 82
82 – 92
92 – 102
102 – 117
B 7660 0008
B 7660 0001
B 7660 0002
B 7660 0003
B 7660 0004
B 7660 0005
B 7660 0006
B 7660 0007
Consisting of screws + mounting tools. Spindles must be ordered separately!
42
Review
Panic and emergency exit devices were never clearly regulated by
product standards. Only “... easy opening, ... from the interior, ... at
the full width” was required in these codes. However, the important
term of “easy opening” was never described with reproducible
values. There was also no clear regulation as to how door fittings
must be designed, so that people would not injure themselves on
them. The interplay of various individual components was never
subjected to a real-life vandalism test. The customer was generally
left alone with problems in the assembly or in the interplay of pro-
ducts by various manufacturers. Most of the specifications came
from the area of fire protection and always required the appropriate
verification of suitability for fire-rated doors.
New uniform standards for the equipment of escape doors are
now valid in Europe. These standards describe in detailed test spe-
cifications how “easy opening” can be measured. Moreover, they
contain directives specifying the design and function of fittings.
An essential innovation: Lock, fitting and assembly accessories
are tested together and may only be used as a tested unit. Thanks
to practical tests such as vandalism tests and to single products
being made compatible with each other, the assembly of fittings is
simplified and their long-range function clearly improved. All new
products must be approved accordingly since 04/01/2003 and be
marked with a classification code along with the CE-marking. The
classification code indicates the range of approved applications
and makes it easy to verify the proper product combination during
a later building inspection.
The protection of people in buildings does not only play an impor-
tant role in the event of a fire, but also in panic situations that might
occur every day.
Panic and emergency exit devices for Europe
Present
43
Panic and emergency exit devices for Europe
Two types of escape doors – two new EU standards. Escape door
systems within the context of the new standards are divided into
emergency exit and panic exit devices.
This means that escape doors must be designed as panic exit
devices or as emergency exit devices depending on the respective
application.
Emergency exit devices according to EN 179 are designed for
buildings or building sections which are not open to the public, i.e.
where users are familiar with the function of the escape door.
They are suitable for all applications where public traffic may be
excluded. Secondary exits or doors in building sections frequented by
authorised persons only must also be equipped according to EN 179.
Application examples:
Private housing areas
Class rooms in schools
Administrative buildings of industrial concerns
not accessible to the public
Areas of event buildings not accessible to the public
Areas in airports, banks, shopping centres, etc.
not accessible to the public.
As operating elements this standard specifies lever handles or push
pads.
Recommended use:
Exit devices to EN 179 should be applied in areas where public
use may generally be excluded.
Recommended use:
If a later use of the building is not clearly defined at the
beginning of planning, panic exit devices to EN 1125
should preferably be installed.
This also applies to a modified use at a future time. Otherwise,
considerable retrofitting operations may become necessary.
Panic exit devices according to EN 1125 are used in public
buildings or building sections where visitors not familiar with the
function of the escape doors must be able to operate these without
instructions in the event of an emergency.
This specifically includes:
Hospitals
Escape routes in schools
Public administration
Events buildings
Airports
Shopping centres, etc.
As operating elements this standard specifies push bars or touch
bars reaching over the total width (or at least 60 %) of the door leaf.
Different locking systems for different fields of application
44
Panic and emergency exit devices for Europe
Easy opening of escape routes through panic exit devices
according to EN 1125
The exit device is checked for suitability in two different tests.
The first test is carried out without an initial load being applied to
the door leaf; the door must open automatically in the direction of
the escape route at a maximum operating force of 80 Newton. In the
second test carried out with an initial load of 1000 Newton applied
to the door leaf, the operating force must not exceed 220 Newton to
open the door. These values also apply to double leaf door units and
to exit devices which have additional locking elements such as ver-
tical rods or multipoint locks. As with EN 179, the locking systems
are subjected to a vandalism test and an operational durability
test with a permanent load of 25 Newton to prove their everyday
suitability.
Easy opening of escape routes through
emergency exit devices according to EN 179
These are tested at a maximum opening force of 70 Newton applied
vertically onto the lever handle. With all locking elements released,
the door must open in the direction of the escape route.
Little friction of the lever bearing and the smooth interplay of the
locking elements and the appropriate keepers in the door frame are
important here. Moreover, in order to prove their everyday suitability,
these locking systems are subjected to a vandalism test and an
operational durability test with a permanent load of 25 Newton.
Note:
Only the new standards EN 179 and EN 1125 provide a measu-
rable reference for the “easy opening” of escape doors.
Test 1: Door leaf without initial load
Test 2: Door leaf with an initial load of 1000 N
Main requirements for escape doors:
Doors in rescue routes must permit opening at all times
from the inside easily and at the full width.
Esacpe doors must open the escape route within
1 second with a hand movement without the use of a key
(EN 1125 / EN 179). Escape doors must open outwards.
Rescue routes must not be blocked.
Door fittings must be designed in a way that people‘s clothing
will not catch on them.
The open end of the lever must be designed in a way that it
points to the surface of the door leaf, in order to prevent
injuries (EN 179).
45
Graphic 2
Graphic 1
Panic and emergency exit devices for Europe
Escape routes must open in one movement
This means that on double leaf door units only full panic systems
are permitted providing the opening of both door leaves, even when
only the handle on the inactive leaf is operated. With the use of
G.U-BKS locks, this requirement can be fulfilled in any location
thanks to a choice of various panic functions for single and double
leaf door assemblies. Further extensive safety requirements may
be met with additional electromechanic options allowing for the
integration of intelligent escape door control and access control
systems. Mechanics and electronics are complemented here in one!
Escape doors must open outwards
This requirement is already known from various codes. It is incor-
porated in the new standards which specify locking systems for
outward opening escape doors exclusively. Escape door functions
“opening inward” known for special cases, cannot be permitted
according to EN 179 and EN 1125. With the use of push bars and
touch bars to EN 1125, this would not be logical after all.
Rescue routes must not be blocked
Any kind of impediment in the floor area – except for thresholds up
to a certain height – are not permitted. Human life is saved on freely
accessible escape routes only.
Fittings must be designed to prevent injury to people
With these standards, design variants are regulated for the first time.
The adequacy of particular fittings can be easily verified by means
of dimensioned graphics.
Graphic 1 shows the current requirements for lever handles accor-
ding to EN 179. Here, precise dimensions of the lever end inclined
toward the door leaf are missing among other specifications. Since
the design possibilities according to this graphic are limited to
U-shaped models, designs according to graphic 2 are planned for
the next updated issue of the standard. Current licenses, however,
already take this amendment into account; otherwise architects and
building contractors would not have the creative scope they desire,
and the manufacturers of fittings could offer only a very limited
range of lever handles.
46
CE marking symbol
Identification no. of the certification body + no. of the EC certificate of conformity
Number and year of this European Standard
Category of use: Grade 3 = high frequency applications
DIN EN 1125; 2008
0432 BPR 0002 2008
BKS GmbH Heidestr. 71 D-42549 Velberrt
Durability:
Active leaf grade 7 = 200.000 cycles
Inactive leaf grade 6 = 100.000 cycles
Door mass: Grade 5 = up to 100 kg
Grade 6 = up to 200 kg
Grade 7 = up to 200 kg
Grade 0 = not approved for use on fire/smoke doors
Grade A = approved for smoke doors
Grade B = approved for fire/smoke doors
Suitability
for use on fire/
smoke doors:
Manufacturer + address
Year in which the
marking was applied
Type of horizontal bar operation:
Type A = push bar Type B = touch bar
Projection of horizontal bar:
Grade 1 = large projection
Grade 2 = standard projection
Security (burglary protection):Grade 2 = minimum specification, the only one to be used
Corrosion resistance:
Grade 3 = high resistance
Grade 4 = very high resistance
Safety:
Grade 1 = top grade, the only one to be used
Field of door application:
Category A: single door, double door*
Category B: single door only
Category C: double door**
* active or inactive leaf of double door ** inactive leaf only
Panic and emergency exit devices for Europe
Locks and fittings must be provided with test identification codes
(DO numbers) and with the required CE-marking.
This allows a locking system to be identified as approved during
assembly and fincal acceptance.
We are aware that our product range is very extensive due to the
numerous situations in buildings. For this reason, we have deve-
loped logos with which we additionally mark our products. For
the sake of clarity, partners of G.U-BKS also use these logos, thus
enabling you to combine solutions from different catalogues to meet
your individual requirements.
CE Marking
BKS locking systems have the following certification numbers:
DIN EN 179 = 0432 BPR 0003
DIN EN 1125 = 0432 BPR 0002
The first purpose of CE marking is to simplify the movement of
goods within the EC. Another purpose is to indicate the approved
product use by the classification code on the CE label.
Our locks are visibly marked on the forends with the label explained
below.
Many of them are approved for use in locking systems according
to EN 179 and EN 1125. Their approved use is recognisable by the
classification code on the label.
The field of application is to be taken from the respective product
description.
47
Panic and emergency exit devices for Europe
Fittings approved to EN 179
Various lever models are tested and approved for the use on con-
tract doors.
The illustrated models only represent a part of our programme. We
are continuously developing new products that correspond to the
requirements of our customers.
Upon special request, we can also design individual models for your
contract work which will conform to the requirements of EN 179.
Fittings approved to EN 1125
Only operational elements spanning the door width are approved
as fittings to 1125. Push bars or touch bars are such operational
elements.
The illustrated operational elements provide an overview of our
programme.
Thanks to a variety of finishes, it is possible to create a harmonious
appearance with regard to the fittings on other doors in the building.
Special fitting solutions for slim profiles to avoid material deforma-
tion and injury are also contained in our programme.
You can recognise BKS fittings by the test labels attached to the
bottom side of the mounting plates.
The appropriate BKS locks are marked visibly on the forend.
The table on the right shows which combinations are approved.
By means of the test labels it is possible to identify appropriate locks
and fittings in the event of separate delivery.
Note:
Approval and application as emergency exit device to EN 179
or panic exit device to EN 1125 are only possible in conjunction
with the appropriate EC conformity certificate.
RR-BELCANTO-P
RR-RONDO
Narrow stile doors
EMMAUS
BELCANTO-PRONDO
OFFICE
Timber and steel doors
BKS locks BKS fittings
Timber and steel doors
DO 5.0
DO 5.1
DO 9.2
DO 20.10.1
Narrow stile doors DO 9.1
DO 9.6
DO 20.10.2
SECURY DO 5.1
DO 9.1
DO 20.10.1
Touch bar with integral lock
Push rod, PVC
Push rod, stainless steel
Push rod, aluminium
Touch bar
Push bar with integral lock
48
Fittings
Control locks Square spindle
Floor socket
Vertical rods Screws
Latch plates Locks
Push bar
Panic and emergency exit devices for Europe
Locking systems as unit
Practical experiences in the combination of products by various
manufacturers have shown that not all combinations function
smoothly without an examination. For this reason, one of the essen-
tial features of the new requirements was defined:
Lock, fittings and accessories may only be tested, marked and
assembled as a unit.
The user as well as the planner thereby receive a guarantee that the
system was tested and approved for compatibility.
Extensive durability and manipulation tests guarantee a safe inter-
action of all components.
49
Approval and certification
Exit devices according to EN 179 and EN 1125 must only be
tested by notarized institutes (authorized in Europe). Here, we are
working together with the Material Testing Authority of North Rhine-
Westphalia (MPA/NRW) in Dortmund.
The additional outside supervision of the products is also performed
by MPA and is documented by the Ü-marking on the products.
Shipment according to EN 179 and EN 1125
The components of approved exit devices may be tendered sepa-
rately. Depending on the sales method, separate deliveries directly
to the location are also possible. The responsibility for the correct
composition and assembly is then given to the assembly company.
In this event, the door manufacturer and possibly participating dea-
lers are subject to reporting requirements.
Sales partners of the G.U Group are under the obligation to point
out the adherence to these specifications to their customers. These
partners are authorized to use the illustrated label.
Standardised operation throughout Europe
The operation of escape doors will be standardised in Europe in the
future. The protection of human life is placed above the protection
of property.
Both standards are generally implemented and valid in the EC.
In many countries the use of push rods or touch bars similar to
EN 1125 has been common practice for many years already.
Panic and emergency exit devices for Europe
50
Applications
The security fittings may be used on house or apartment entrance doors.
Depending on the product variant, contract fittings are also approved for fire control, smoke control, and escape doors.
Coming with different backplate widths, they are suitable for timber and steel doors, or narrow stile doors.
Creative design options
By combining various lever and knob models, it is possible to create individual
fitting combinations available as entrance set or as lever set.
Protection of the locking cylinder
The optional cylinder covering protects the
cylinder against being withdrawn or twisted
off forcibly.
The plug security plate is suitable for
current key sizes.
Security backplate outside
Depending on the security grade, the outside backplate is
secured by hardened elements against manipulation by drilling.
Attachment to the door
Through-fixing with rugged fastening elements guarantees the stable
attachment of the fittings and prevents them from being pried open.
Tested quality
Burglary inhibition according to DIN 18257 Suitability for fire control, smoke control and escape doors to DIN 18273 Manufacture and internal quality control according to EN ISO 9001 External quality control by the Material Testing Authority of
North Rhine-Westphalia (MPA/NRW)
Material options
Anodized or colour coated aluminium Stainless steel Titanium coating in brass appearance (ES3)
Features of security fittings
1
2
3
4
5
51
Classification of security fittings
Features of security fittings
Extra high burglary resistance class 3 to DIN 18257 (grade 4 security to EN 1906)
Strength of backplate: 5 kN (20 kN)
Maximum flexion of backplate: 2 mm (5 mm)
Tensile strength of fastening elements: (30 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: the entire plate surface must be secured
(30 s on randomly selected point over the entire plate surface).
Tensile strength of cylinder cover: 20 kN (20kN)
Chisel test resistance: 12 (12) blows
EN 1906 values in parentheses
High burglary resistance class 2 to DIN 18257 (grade 3 security to EN 1906)
Strength of backplate: not demanded (15 kN)
Maximum flexion of backplate: not demanded (5 mm)
Tensile strength of fastening elements: (20 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: partial area around locking cylinder must be secured
(30 s on randomly selected point).
Tensile strength of cylinder cover: 17 kN (15kN)
Chisel test resistance: 6 (6) blows
EN 1906 values in parentheses
Moderate burglary resistance class 1 to DIN 18257 (grade 2 security to EN 1906)
Strength of backplate: not required (10 kN)
Maximum flexion of backplate: not required (5 mm)
Tensile strength of fastening elements: (15 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: partial area around locking cylinder must be secured
(30 s on randomly selected point).
Tensile strength of cylinder cover: 15 kN (10kN)
Chisel test resistance: 3 (3) blows
EN 1906 values in parentheses
Mild burglary resistance class 0 to DIN 18257 (grade 1 security to EN 1906)
Strength of backplate: (7 kN)
Maximum flexion of backplate: (5 mm)
Tensile strength of fastening elements: (10 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: (not provided)
Tensile strength of cylinder cover: (not provided)
Chisel test resistance: (not provided)
EN 1906 values in parentheses
52
Applications
The contract (heavy-duty) fitting range was developed for the sophisticated demands of contract work. Thanks to its modular design,
it provides for a multitude of applications.
Depending on the product variant, contract fittings are also approved for fire control, smoke control, and escape doors.
Coming with different backplate widths, they are suitable for timber and steel doors, or narrow stile doors.
Creative design options
By combining various lever and knob models, it is possible to create
individual fitting combinations coming in different types of sets.
Contract fittings with BKS bearing technology
Attachment to the door
Through-fixing with non-loosening fastening
elements provides for a rugged connection.
Tested quality
Suitability for fire control, smoke control and escape doors to DIN 18273 Burglary inhibition according to DIN 18257 – class 3 Manufacture and internal quality control according to EN ISO 9001 External quality control by the Material Testing Authority of
North Rhine-Westphalia (MPA/NRW)
Material options
Anodized or colour coated aluminium Stainless steel Titanium coating in brass appearance (ES3)
Features of contract fittings
Features and advantages:
– Compensation of latching inaccuracies
– Maintenance-free operation
– Minimised friction losses
– Fixed backplate with friction washer
– Smooth and noiseless lever operation
1
2
3
4
53
Features of contract fittings
Mounting advice for push bars
BKS locks and BKS fittings are perfectly compatible with each other; if appropriately assembled, they comply with the high requirements of
the respective standards and regulations.
In order to absorb the high forces applied on the door in the event of an emergency, it is important that the fittings should be through-fixed.
Especially on 2-leaf narrow stile escape doors is it essential that the fittings should be attached securely. Where through-fixing is not
possible, it is necessary that additional fastening elements such as, e.g., clinch nuts are used to provide for appropriate fitting attachment.
For safe and durable functioning of the fittings we recommend assembly according to the examples below.
Mounting advice for touch bars
54
Materials and finishes
Aluminium
Stainless steel
BKS only use high-quality aluminium alloys for their fitting programme.
A variety of finishes and colours provides for versatile creative possibilities.
The manufacture of such products is very sophisticated, minimal colour deviations are therefore possible.
Our stainless steel fittings are made from the material 1.4301 according to DIN 17440.
This material features excellent application properties and is increasingly used on windows and doors.
Anodised finishes Standard colours, powder-coated
Special colours, powder-coated
Golden yellow
RAL 9016
F1 natural
anodised colour
F2 champaign
colour
Finishes
Stainless steel
matt brushed
Brass
Our high-quality fittings with brass appearance are
manufactured from stainsless steel and coated with
titanium(PVD). They distinguish themselves by out-
standing corrosion and abrasion resistance and
require little maintenance only.
Finishes
Brass appearance
Stainless steel
polished
White
RAL 9016
Ruby red
RAL 3003Dark red
RAL 3007
Ultramarine
RAL 5002Sapphire blue
RAL 5003
Dark green
RAL 6012
Brown-olive
RAL 6022Dark brown
RAL 8022
Deep black
RAL 9005
Agate grey
RAL 7038
Dark bronze
UC5
Silver colour
Painted finish
Mint green
RAL 6029
left right
55
Door handing
Boreholes
72
/92
72
/92
74
/94
74
/90
72
/92
Product advice
Door fittings should always be fixed from inside. The DIN direction must be specified for asymmetrical levers and backplate forms.
Direction of lever handle
pointing to the left pointing to the right
Risk of injury
With narrow stile doors it is important to ensure that suitable
fittings are used.
Lever handles should always be cranked to prevent injuries as
the door is operated.
CC = cylinder cover CH-RC = Swiss round cylinder RC = round cylinder BB = warded versionPC
DIN left
Hinges on the left – visible
DIN right
Hinges on the right – visible
56
Product information regarding fittings
According to the defined manufacturer's liability described in paragraph 4 of
the German "Product Liability Act", the following information regarding locksand
fittings should be observed.
Non-compliance excempts the manufacturer of his liability.
1. Product information and use as directed
A lock generally has the function to lock and block a door. Simple lock designs
serve only to shut the door. This means that a door is kept closed so that it cannot
be opened by pulling or pushing, but may be opened by a simple method, such as
by moving a lever handle. The lock latch – generally called latch – serves as lock.
Securing the closed door by blocking at least one deadbolt or latchbolt (= dead-
bolting latch) which meshes into the appropriate recess of the jamb, respectively
the latch plate, is called blocking.
The deadbolt must be blocked in extended position against being pushed back.
Moreover, door opening must be efficiently impeded unless the appropriate key
is used.
A lock must only be blocked with the door in closed position.
Cylinder attachment screws not matching with the backset dimension of the lock
must be cut to length (BKS delivers the appropriate screw length if the backset
is specified in the order).
A mortise lock is a lock which is inserted into a recess in the door leaf (lock
pocket) and fixed with screws.
The following must be observed to ensure use as directed :
– Locks, latch plates, door fittings, attaching elements and locking cylinders must
be selected to be compatible with each other.
– Installation, maintenance and possible replacement must be carried out accor-
ding to the state of the art as documented in standards related to these
products and in the manufacturers' catalogues and instructions.
With locks for escape doors or special locks, the simultaneous operation of key
and fitting, e.g., a lever handle, is usually not allowed.
Locks for escape doors or special locks may only be combined with locking cylin-
ders with turn knob, if this is agreed with the lock manufacturer by contract. For
it is generally assumed that only the owners of the keys have the right to operate
the lock, and the activation of a lock through a knob cylinder (i.e. without key) is
not considered to be a normal case.
Latch and deadbolt being returned simultaneously by the mere operation of the
lever handle is a special case which must not generally replace the standard key
operation for withdrawing the deadbolt.
Locking cylinders may only be installed in locks without any reservation if they
comply with a dimensional standard (e.g. DIN 18252), and if the locks in turn are
explicitly designed for cylinders to this standard.
In all other cases, the manufacturer, dealer, fabricator or consumer of such locks
has to ensure that the locking cylinders he has selected are suitable for the
intended use.
It is necessary that legal regulations and manufacturer's instructions should be
observed. For example, no locking cylinders with knob, turn or similar handle may
be installed in panic locks.
General terms, unless explained on catalogue pages, in brochures, price lists or
on the internet are defined in the standards relevant for these products (such as
EN 179, EN 1125, EN 1303, EN 1906, EN 12209). Deviations from the particular
relevant standard must be specified in the order.
2. Incorrect use
Incorrect use – meaning not used as specified – of locks is when, e.g.,
– the flawless use is prevented by inserting foreign objects into the lock or into
the latch plate.
– the lock or the latch plate are attacked in such a way on the outside or inside
that their construction or function are affected.
– the deadbolt is extended to prevent the door from closing
– the function of the locking elements is blocked as a result of improper assembly
or subsequent treatment, e.g., painting.
– a load is put on the lever handle exceeding the normal force applied by hand.
– unsuitable, such as dimensionally deviating, or the wrong keys are used
– the specified door gap changes as a result of hinge re-adjustments or uninten-
ded lowering of the door.
– a double door is opened by the passive leaf although not designed and approved
for this feature.
– objects or extremities are put between the door leaf and the jamb as the door
closes.
– activating the lever and the key simultaneously.
3. Product performance
Unless described in our catalogues, brochures or performance specifications,
technical requirements must be agreed with us.
The relevant standards serve as guidelines (for example, EN 179, EN 1125, EN
1303, EN 1906, EN 12209).
Basic requirements and additional requirements are defined in these standards.
The serviceability of locks also depends on the operating frequency, operating
method, environmental effects and maintenance.
Lock, latch plate, door fittings, locking cylinder and keys must be replaced as
soon as problems occur despite proper maintenance.
This also applies to attempts to forcefully overcome locks and their accessories
(burglary attempts).
4. Product maintenance
Locks must be lubricated with suitable lubricants at least once a year or more
frequently depending on the wear. Door fittings, latch plate and locking cylinder
must be checked for their proper condition and tight attachment. Only cleaning
agents not containing corrosive ingredients may be used.
5. Information and instruction duties
In order to comply with the informational and instructional duties prescribed by
the German Product Liability Act, the following documents and services are made
available to specialist dealers, locksmiths, architects, planners, fabricators and
end users upon request :
– catalogues, brochures
– specification clauses, quotation documents, key combination records
– the relevant standards serving as guidelines, for example, EN 179, EN 1125,
EN 1303, EN 1906, EN 12209.
– Instructions for installation, operation and maintenance
For the selection, installation, operation, and maintenance of locks and fittings,
– architects and planners should consider to request and observe all required
product information from us.
– specialist dealers must consider to observe product information and reference
in the price lists and specifically request all necessary instructions from us and
to forward these to the fabricators.
– fabricators must consider to observe all product information and specifically
request operating and maintenance instructions from us and to forward these
to contractors and consumers.
57
Product information regarding locks and fittings
When using
BKS locks and
fittings, the
following advice
must be observed:
1. Do not make drillings on the door leaf with the lock
installed.
2. Do not hit the square through the follower by force.
5. Do not paint over deadbolt and latch.4. The distance between the lock forend and
the latch plate should range between 2 and 5 mm.
3. Do not carry the door leaf by the handle.
58
Product information regarding locks and fittings
8. The deadbolt must not be thrown with the door
open.
9. Do not operate handle and key at the same time.
10. Emergency exit devices must not be left
with the key inserted.
11. Emergency exit devices must not be fitted
with cylinders having a knob or a turn.
Exception: self-locking locks of series 19xx and 21xx.
19xx und 21xx.
Attention: Push bars might interfere with the knob or turn!
6. The handle must be loaded in rotational direction only.
The maximum force allowed is 150 N.
7. Do not manipulate the lock with foreign objects.
Operate it with the appropriate key only.
59
Product information regarding locks and fittings
Exclusion of liability
BKS products are permanently adapted and developed to meet the growing demands of the market. We also reserve
the right to make changes serving to advance the state of the art.
Further reasons for modification may be:
– global technical development
– alterations in the product range
– adaptation to changed laws and technical standards
The present catalogue was compiled with the greatest possible care. Nevertheless, we ask for your understanding
that we take no responsibility for possible mistakes with regard to presentation and description of the products.
Thank you.
12. Exit devices not corresponding to EN 179 or EN 1125
are not suitable for frequent use and should only be
operated in the event of an emergency.
13. Double leaf doors without double-sided panic function
(full panic function) may not be forced open by the
passive leaf.
14. If there is any evidence of violence, the lock must be
replaced immediately.
15. Lubricate locks with non-resinous oil at least once a year.
1 x year
60
Relevant standards
DIN 107
Definition of DIN left and DIN right in the building and construction
industry
DIN 1080, Part 1
Terms, symbols and units in civil engineering, basics
DIN 4102, parts 5 + 18
Part 5: Fire performance of building materials and building components;
fire-resistant closures, closures in elevator shaft walls and
fire-resistant glazing
Part 18: Fire performance of building materials and building components;
fire-resistant closures, documentation of the "self-closing"
properties (continuous operation test)
DIN 18055
Windows; joint impermeability, resistance to driving rain and to mechani-
cal stress; specifications and tests
DIN 18082, parts 1 + 3
Part 1: Fire-resistant closures, steel doors T30-1, type A
Part 3: Fire-resistant closures, steel doors T30-1, Type B
DIN 18095, parts 1 + 2
Part 1: Doors; smoke control doors; terms and requirements
Part 2: Doors; smoke control doors; type testing for durability
and tightness
DIN 18100
Doors; wall openings for doors; dimensions to DIN 4172
DIN 18101
Doors; doors for residential construction; door leaf dimensions,
position of lock and hinges; interrelationship between dimensions
DIN 18111, part 1
Door frames, steel frames, standard frames for rebated doors
DIN 18250
Mortise locks for fire-resistant closures
DIN 18251
Locks; Mortise locks for doors
DIN 18252
Locking cylinders for door locks; terms, descriptions
DIN 18255
Building hardware; lever handles, backplates and rosettes – terms,
dimensions, requirements
DIN 18257
Building hardware; security fittings – terms, dimensions, requirements,
tests and markings
DIN 18273
Building hardware; lever handle sets for fire control doors and smoke
control doors – terms, dimensions, requirements and tests
DIN 18357
VOB (German Construction Contract Procedures), part C: General technical
contractual requirements, building hardware
DIN 18361
VOB (German Construction Contract Procedures), part C: General technical
contractual requirements, glazing
DIN 68706, part 1
Interior doors of timber and timber materials, plywood doors, terms,
perferential dimensions, structural features
EN 179
Building hardware. Emergency exit devices operated by a lever handle
or push pad, for use on escape routes
EN 1125
Building hardware. Panic exit devices operated by a horizontal bar,
for use on escape routes
EN 1154
Building hardware. Controlled door closing devices
EN 1303
Building hardware. Cylinders for locks. Requirements and test methods
ENV 1627
Windows, doors, shutters. Burglar resistance. Requirements and
classification
ENV 1628
Windows, doors, shutters. Burglar resistance. Test method for the
determination of resistance under static loading
ENV 1629
Windows, doors, shutters. Burglar resistance. Test method for determina-
tion of resistance under dynamic loading
ENV 1630
Windows, doors, shutters. Burglar resistance. Test method for the
determination of resistance to manual burglary attempts
EN 1634, parts 1 + 3
Fire resistance tests for door and shutter assemblies
Part 1: Fire control doors and shutters
Part 3: Smoke control doors and shutters
EN 1906
Building hardware. Lever handles and knob furniture. Requirements and
test methods
The most important (European) standards concerning doors and door-related products are:
61
Quality
The constant high quality of all operational sequences at BKS is guaranteed by the application of a Quality Assurance System
to EN ISO 9001.
This is the highest quality standard in Europe, not only for production but also for other company divisions such as development,
order processing or after-sales service etc.
BKS applies this standard to all product areas (locking cylinders, door locks, fittings, electronics and door closers).
The extensive G.U-BKS range is designed to bear high stress loads and oriented towards compatibility among its products.
A high level of quality, reliability and durability of door units can only be guaranteed with a system of compatible products which G.U-BKS
is capable to offer thanks to the unequalled diversity of the Group's product range.
Product quality and compliance with various standards and regulations are documented in test results and approvals,
copies of which are available on request.
62
Security fittings, features and requirements .......................................................................................................................................................... 51
Floor-mounted door stop ...................................................................................................................................................................................... 34
Touch bar ............................................................................................................................................................................................................. 26 – 27
Direction of lever handle (by definition) ................................................................................................................................................................. 55
Spindles ............................................................................................................................................................................................................... 38
Window handles of stainless steel ........................................................................................................................................................................ 32 – 33
Panic and emergency exit devices for Europe ...................................................................................................................................................... 42 – 49
Materials and finishes........................................................................................................................................................................................... 54
Features of BKS security fittings ........................................................................................................................................................................... 50
Features of contract fittings .................................................................................................................................................................................. 52
Lever models ANDANTE VK/ANDANTE RR ............................................................................................................................................................. 34
Lever model RR-BELCANTO .................................................................................................................................................................................. 16
Lever model BELCANTO-Panic .............................................................................................................................................................................. 12
Lever model FORTE VK ......................................................................................................................................................................................... 14
Lever model RR-RONDO ....................................................................................................................................................................................... 8
Mounting advice for fittings .................................................................................................................................................................................. 53
Standards ............................................................................................................................................................................................................. 60
Product information/product liability ..................................................................................................................................................................... 56 – 59
Quality control ...................................................................................................................................................................................................... 61
Screws ................................................................................................................................................................................................................. 41
Security rosettes for narrow stile doors ................................................................................................................................................................ 28
Standard contract fittings for narrow stile doors ................................................................................................................................................... 30
Push bars ............................................................................................................................................................................................................. 20– 25
Spindles ............................................................................................................................................................................................................... 38 – 40
Door holders ......................................................................................................................................................................................................... 36
Door handing ....................................................................................................................................................................................................... 55
Wall-mounted floor stop ....................................................................................................................................................................................... 34
Threaded spindles ................................................................................................................................................................................................ 38
WP02013-04-2-1 12/2009 Printed in Germany
Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 3D-71254 DitzingenPhone + 49 (0) 71 56 3 01-0Fax + 49 (0) 71 56 3 01-2 93
BKS GmbHHeidestr. 71D-42549 VelbertPhone + 49 (0) 20 51 2 01-0Fax + 49 (0) 20 51 2 01-4 31
www.g-u.com
Fittings for timber and steel doors
Door fittings
G.U Group product range for timber and steel doors
4
Project, fire protection and security fittings ES3
Contents
Standard security fittings
Page 8 Page 16Page 12
Rondo BelcantoBelcanto Panic
Escape door fittings
Page 24
EmmausBauhaus
Office
Page 30
Wide backplate
Page 38 Page 40
Security fittings
ES1+ES2
Page 20
Page 26
Pages 32 + 34
Push bars
Page 36
Touch bar
Rondo
ES0
5
Standard project fittings for timber and steel doors
Contents
Stainless steel window handles
Page 44Page 42
Andante Crescendo
Page 46
Forte
Page 48Page 48
Andante Crescendo
Page 48
Page 48Page 48
Forte
Office
Dirigent
6
Contents
Accessories for contract work
Door holder
Page 50 Page 50Page 50Page 50
Ladies Directional arrowHandicappedGentlemen
Page 52 Page 52Page 52Page 52
3934 694439333934
Page 50 Page 50Page 50
Floor-mounted
door stop I
Wall-mounted
door stopFloor-mounted
door stop II
7
Contents
Architects range
Fixing accessories
Page 54 Page 54Page 54Page 54
Page 58 Page 61Page 60Page 59
Spindles ScrewsDivided spindles Threaded spindles
8
Lever model RONDO
Product information
Lever handles available with 8, 9, 10 mm spindle; fixed backplate with friction washer (BKS differential bearing). The cranked door knob variants are non-handed.Clip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.The vertical lever variant is provided with a detent mechanism to ensure a precise vertical position.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179.The mounting accessories are included in the items supplied (contract sets for door thickness 37 – 42 mm, fire-rated sets for door thickness 42 – 52 mm).For use on escape doors with a divided follower it is necessary to specify the lock position in addition to the door thickness (refer to page 60).
ø55
38
8
50 4
134 4
180
31,5
130
21,5
180
50
248
21,5
139,5
75,5
8ø50 ø50
6543
43
165
21,5
112
8
ø20
147
Round knob Ball-type knob
60
Knob types Backplate types
Fire protection
325
21,5
160
135
50
ø50
90
ø50
36
50
ø50
250 21,5
139,5
75,5
15
cranked round knob cranked ball-type knob
Dimensioned drawings
9
RONDO – Contract fittings
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess/
lock
posit
ion
Entrance set
9 mm spindle
Lever set
9 mm spindle
Lever set
8 mm spindle
Entrance set
8 mm spindle
Bath set
9 mm spindle
Bath set
8 mm spindle
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate square
Oblong plate rounded
B 7050 5141
B 7050 7242
B 7050 4141
B 7050 0140
B 7050 0141
B 7050 2140
B 7050 2141
B 7050 5131
----
----
B 7050 0130
B 7050 0131
B 7050 2130
B 7050 2131
B 7050 5101
----
----
B 7050 0100
B 7050 0101
B 7050 2100
B 7050 2101
B 7050 5103
----
----
B 7050 0102
B 7050 0103
B 7050 2102
B 7050 2103
B 7050 5105
----
----
B 7050 0104
B 7050 0105
B 7050 2104
B 7050 2105
B 7050 5107
----
----
B 7050 0106
B 7050 0107
B 7050 2106
B 7050 2107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7051 5141
B 7051 7242
B 7051 4141
B 7051 0140
B 7051 0141
B 7051 2140
B 7051 2141
B 7051 5131
----
----
B 7051 0130
B 7051 0131
B 7051 2130
B 7051 2131
B 7051 5101
----
----
B 7051 0100
B 7051 0101
B 7051 2100
B 7051 2101
B 7051 5103
----
----
B 7051 0102
B 7051 0103
B 7051 2102
B 7051 2103
B 7051 5105
----
----
B 7051 0104
B 7051 0105
B 7051 2104
B 7051 2105
B 7051 5107
----
----
B 7051 0106
B 7051 0107
B 7051 2106
B 7051 2107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
Round knob
Round knob
B 7073 5141
B 7073 7242
B 7073 4141
B 7073 0140
B 7073 0141
B 7073 2140
B 7073 2141
B 7073 5131
----
----
B 7073 0130
B 7073 0131
B 7073 2130
B 7073 2131
B 7073 5101
----
----
B 7073 0100
B 7073 0101
B 7073 2100
B 7073 2101
B 7073 5103
----
----
B 7073 0102
B 7073 0103
B 7073 2102
B 7073 2103
B 7073 5105
----
----
B 7073 0104
B 7073 0105
B 7073 2104
B 7073 2105
B 7073 5107
----
----
B 7073 0106
B 7073 0107
B 7073 2106
B 7073 2107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
Round knob
Round knob
B 7074 5141
B 7074 7242
B 7074 4141
B 7074 0140
B 7074 0141
B 7074 2140
B 7074 2141
B 7074 5131
----
----
B 7074 0130
B 7074 0131
B 7074 2130
B 7074 2131
B 7074 5101
----
----
B 7074 0100
B 7074 0101
B 7074 2100
B 7074 2101
B 7074 5103
----
----
B 7074 0102
B 7074 0103
B 7074 2102
B 7074 2103
B 7074 5105
----
----
B 7074 0104
B 7074 0105
B 7074 2104
B 7074 2105
B 7074 5107
----
----
B 7074 0106
B 7074 0107
B 7074 2106
B 7074 2107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7050 5441
B 7050 7742
B 7050 4441
B 7050 0540
B 7050 0541
B 7050 2840
B 7050 2841
B 7050 5431
----
----
B 7050 0530
B 7050 0531
B 7050 2830
B 7050 2831
B 7050 5401
----
----
B 7050 0500
B 7050 0501
B 7050 2800
B 7050 2801
B 7050 5403
----
----
B 7050 0502
B 7050 0503
B 7050 2802
B 7050 2803
B 7050 5405
----
----
B 7050 0504
B 7050 0505
B 7050 2804
B 7050 2805
B 7050 5407
----
----
B 7050 0506
B 7050 0507
B 7050 2806
B 7050 2807
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7051 5441
B 7051 7742
B 7051 4441
B 7051 0540
B 7051 0541
B 7051 2840
B 7051 2841
B 7051 5431
----
----
B 7051 0530
B 7051 0531
B 7051 2830
B 7051 2831
B 7051 5401
----
----
B 7051 0510
B 7051 0511
B 7051 2800
B 7051 2801
B 7051 5403
----
----
B 7051 0512
B 7051 0513
B 7051 2802
B 7051 2803
B 7051 5405
----
----
B 7051 0514
B 7051 0515
B 7051 2804
B 7051 2805
B 7051 5407
----
----
B 7051 0516
B 7051 0517
B 7051 2806
B 7051 2807
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
PC = profile cylinder
10
RONDO – Fire protection fittings
Lever set
Dummy plate
Turn handle
Half set, inside
Half set outside
Knob backplate, outside
Inside handle w/o PC
Outside handle w/o PC
PC rosette inside
PC rosette outside
Knob
Entrance set
Backplate type Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white PVC blackAluminium UC5
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
Round knob
Round knob
PC
PC 72
PC 72
PC 72
PC 72
B 7076 5141
B 7076 7242
B 7076 4141
B 7076 0140
B 7076 0141
B 7076 2140
B 7076 2141
B 7076 5131
----
----
B 7076 0130
B 7076 0131
B 7076 2130
B 7076 2131
B 7076 5101
----
----
B 7076 0100
B 7076 0101
B 7076 2100
B 7076 2101
B 7076 5103
----
----
B 7076 0102
B 7076 0103
B 7076 2102
B 7076 2103
B 7076 5105
----
----
B 7076 0104
B 7076 0105
B 7076 2104
B 7076 2105
B 7076 5107
----
----
B 7076 0106
B 7076 0107
B 7076 2106
B 7076 2107
----
----
----
B 7123 0010
B 7123 0110
----
----
Backplate type Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white PVC blackAluminium UC5
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
PC
PC 72
PC 72
PC 72
PC 72
B 7053 5141
B 7053 7242
B 7053 4141
B 7053 0140
B 7053 0141
B 7053 2140
B 7053 2141
B 7053 5131
----
----
B 7053 0130
B 7053 0131
B 7053 2130
B 7053 2131
B 7053 5101
----
----
B 7053 0100
B 7053 0101
B 7053 2100
B 7053 2101
B 7053 5103
----
----
B 7053 0102
B 7053 0103
B 7053 2102
B 7053 2103
B 7053 5105
----
----
B 7053 0104
B 7053 0105
B 7053 2104
B 7053 2105
B 7053 5107
----
----
B 7053 0106
B 7053 0107
B 7053 2106
B 7053 2107
----
----
----
B 7123 0000
B 7123 0100
----
----
Backplate type Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white PVC blackAluminium UC5
Rosette
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Short plate square
Short plate rounded
Short plate square
Short plate rounded
without
without
without
without
PC 72
B 7000 5041
B 7000 2040
B 7000 2041
B 7000 4041
B 7000 0040
B 7000 0041
B 7000 0140
B 7000 0141
B 7000 5031
B 7000 2030
B 7000 2031
----
B 7000 0030
B 7000 0031
B 7000 0130
B 7000 0131
B 7000 5001
B 7000 2000
B 7000 2001
----
B 7000 0000
B 7000 0001
B 7000 0100
B 7000 0101
B 7000 5003
B 7000 2002
B 7000 2003
----
B 7000 0002
B 7000 0003
B 7000 0102
B 7000 0103
B 7000 5005
B 7000 2004
B 7000 2005
----
B 7000 0004
B 7000 0005
B 7000 0104
B 7000 0105
B 7000 5007
B 7000 2006
B 7000 2007
----
B 7000 0006
B 7000 0007
B 7000 0106
B 7000 0107
----
----
----
----
B 7123 0203
----
----
----
Backplate type Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white PVC blackAluminium UC5
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
w/o PC rosette
without
without
B 7090 5941
B 7090 0040
B 7090 0041
B 7090 2040
B 7090 2041
B 7090 5931
B 7090 0030
B 7090 0031
B 7090 2030
B 7090 2031
B 7090 5901
B 7090 0000
B 7090 0001
B 7090 2000
B 7090 2001
B 7090 5903
B 7090 0002
B 7090 0003
B 7090 2002
B 7090 2003
B 7090 5905
B 7090 0004
B 7090 0005
B 7090 2004
B 7090 2005
B 7090 5907
B 7090 0006
B 7090 0007
B 7090 2006
B 7090 2007
----
----
----
----
----
Backplate type Knob model Cylinder bore Aluminium F1 Aluminium F2 Aluminium white PVC blackAluminium UC5
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
PC
PC 72
PC 72
Stainl. steel matt
B 7010 5141
B 7010 0140
B 7010 0141
B 7010 2140
B 7010 2141
Brass PVD
B 7010 5131
B 7010 0130
B 7010 0131
B 7010 2130
B 7010 2131
B 7010 5101
B 7010 0100
B 7010 0101
B 7010 2100
B 7010 2101
B 7010 5103
B 7010 0102
B 7010 0103
B 7010 2102
B 7010 2103
B 7010 5105
B 7010 0104
B 7010 0105
B 7010 2104
B 7010 2105
B 7010 5107
B 7010 0106
B 7010 0107
B 7010 2106
B 7010 2107
----
----
----
----
----
Backplate type Knob model Cylinder bore
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
PC
PC 72
PC 72
Stainl. steel matt
B 7014 5141
B 7014 0140
B 7014 0141
B 7014 2140
B 7014 2141
Brass PVD
B 7014 5131
B 7014 0130
B 7014 0131
B 7014 2130
B 7014 2131
Aluminium F1
B 7014 5101
B 7014 0100
B 7014 0101
B 7014 2100
B 7014 2101
Aluminium F2
B 7014 5103
B 7014 0102
B 7014 0103
B 7014 2102
B 7014 2103
Aluminium UC5
B 7014 5105
B 7014 0104
B 7014 0105
B 7014 2104
B 7014 2105
Aluminium white
B 7014 5107
B 7014 0106
B 7014 0107
B 7014 2106
B 7014 2107
PVC black
----
B 7123 0200
----
----
----
Backplate type Knob model Cylinder bore
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
PC
PC 72
PC 72
Stainl. steel matt
B 7001 5141
B 7001 0140
B 7001 0141
B 7001 2140
B 7001 2141
Brass PVD
B 7001 5131
B 7001 0130
B 7001 0131
B 7001 2130
B 7001 2131
Aluminium F1
B 7001 5101
B 7001 0100
B 7001 0101
B 7001 2100
B 7001 2101
Aluminium F2
B 7001 5103
B 7001 0102
B 7001 0103
B 7001 2102
B 7001 2103
Aluminium UC5
B 7001 5105
B 7001 0104
B 7001 0105
B 7001 2104
B 7001 2105
Aluminium white
B 7001 5107
B 7001 0106
B 7001 0107
B 7001 2106
B 7001 2107
PVC black
----
B 7123 0202
----
----
----
Backplate type Knob model Cylinder bore
Rosette w/o PC rosette
Aluminium white
B 7010 5907
PVC black
----
Backplate type Knob model Cylinder bore
Rosette PC
Backplate type Knob model Cylinder bore
Rosette w/o PC rosette
Backplate type Knob model Cylinder bore
Rosette w/o PC rosette
Backplate type Knob model Cylinder bore
Rosette PC
Stainl. steel matt
B 7010 5941
Stainl. steel matt
B 7098 5141
Stainl. steel matt
B 7014 5941
Stainl. steel matt
B 7001 5841
Stainl. steel matt
B 7097 5141
Brass PVD
B 7010 5931
Brass PVD
B 7098 5131
Brass PVD
B 7014 5931
Brass PVD
B 7001 5831
Brass PVD
B 7097 5131
Aluminium F1
B 7010 5901
Aluminium F1
B 7098 5101
Aluminium F1
B 7014 5901
Aluminium F1
B 7001 5801
Aluminium F1
B 7097 5101
Aluminium F2
B 7010 5903
Aluminium F2
B 7098 5103
Aluminium F2
B 7014 5903
Aluminium F2
B 7001 5803
Aluminium F2
B 7097 5103
Aluminium UC5
B 7010 5905
Aluminium UC5
B 7098 5105
Aluminium UC5
B 7014 5905
Aluminium UC5
B 7001 5805
Aluminium UC5
B 7097 5105
Aluminium white
B 7098 5107
Aluminium white
B 7014 5907
Aluminium white
B 7001 5807
Aluminium white
B 7097 5107
PVC black
----
PVC black
----
PVC black
----
PVC black
----
PC = profile cylinder
11
RONDO – Fire protection and security fittings ES3
Security fittings ES3
Fire protection fittings ES3
Entrance set
Lever set
Entrance set
Lever set
Entrance set
Entrance set
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
Backplate type
CC 72
CC 72
CC 92
B 7300 0041
B 7300 0141
B 7301 0241
B 7300 0031
B 7300 0131
B 7301 0231
B 7300 0001
B 7300 0101
B 7301 0201
B 7300 0003
B 7300 0103
B 7301 0203
B 7300 0005
B 7300 0105
B 7301 0205
B 7300 0007
B 7300 0107
B 7301 0207
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Entrance set
8 mm spindle
Entrance set
10 mm spindle
Entrance set
9 mm spindle
Oblong plate,
roundedRound knob
cranked
Round knob
cranked
Round knob
cranked
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 72
CC 72
CC 92
B 7300 2541
B 7300 2641
B 7301 2741
Round knob
Round knob
Round knob
B 7300 2531
B 7300 2631
B 7301 2731
B 7300 2501
B 7300 2601
B 7301 2701
B 7300 2503
B 7300 2603
B 7301 2703
B 7300 2505
B 7300 2605
B 7301 2705
B 7300 2507
B 7300 2607
B 7301 2707
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Entrance set
8 mm spindle
Entrance set
10 mm spindle
Entrance set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 72
CC 72
CC 92
B 7300 5041
B 7300 5141
B 7301 5241
B 7300 5031
B 7300 5131
B 7301 5231
B 7300 5001
B 7300 5101
B 7301 5201
B 7300 5003
B 7300 5103
B 7301 5203
B 7300 5005
B 7300 5105
B 7301 5205
B 7300 5007
B 7300 5107
B 7301 5207
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Lever set
8 mm spindle
Lever set
10 mm spindle
Lever set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 72 B 7300 5341 B 7300 5331 B 7300 5301 B 7300 5303 B 7300 5305 B 7300 5307
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Lever set
9 mm spindle
Oblong plate,
rounded
Backplate type
CC 72 B 7300 2841 B 7300 2831 B 7300 2801 B 7300 2803 B 7300 2805 B 7300 2807
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Entrance set
9 mm spindle
Oblong plate,
roundedRound knob
Backplate type
CC 72 B 7300 0341 B 7300 0331 B 7300 0301 B 7300 0303 B 7300 0305 B 7300 0307
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Entrance set
9 mm spindle
Oblong plate,
roundedRound knob
cranked
CC = cylinder cover
12
Product information
Lever handles available with 8, 9, 10 mm spindle; fixed backplate with friction washer (BKS differential bearing). The cranked door knob variants are non-handed.Clip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.The vertical lever variant is provided with a detent mechanism to ensure a precise vertical position.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179.The mounting accessories are included in the items supplied (contract sets for door thickness 37 – 42 mm, fire-rated sets for door thickness 42 – 52 mm).For use on escape doors with a divided follower it is necessary to specify the lock position in addition to the door thickness (refer to page 60).
Lever model BELCANTO Panic
Knob types Backplate types
Fire protection
ø55
38
8
50 4
134 4
180
31,5
130
21,5
180
50
248
21,5
139,5
75,5
8ø50
65
50
ø50
90
ø50
43
ø50
36
50
ø50
250 21,5
139,5
75,5
15
43
165
21,5
112
8141
60
ø20 4
5
325
21,5
160
135
Round knob Ball-type knob
cranked round knob cranked ball-type knob
Dimensioned drawings
13
BELCANTO Panic – Contract fittings
Entrance set
9 mm spindle
Lever set
9 mm spindle
Lever set
8 mm spindle
Entrance set
8 mm spindle
Bath set
9 mm spindle
Bath set
8 mm spindle
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70BG 5141
B 70BG 7242
B 70BG 4141
B 70BG 0140
B 70BG 0141
B 70BG 2140
B 70BG 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70BH 5141
B 70BH 7242
B 70BH 4141
B 70BH 0140
B 70BH 0141
B 70BH 2140
B 70BH 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
Round knob
Round knob
B 70BJ 5141
B 70BJ 7242
B 70BJ 4141
B 70BJ 0140
B 70BJ 0141
B 70BJ 2140
B 70BJ 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
Round knob
Round knob
B 70BK 5141
B 70BK 7242
B 70BK 4141
B 70BK 0140
B 70BK 0141
B 70BK 2140
B 70BK 2141
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70BG 5441
B 70BG 7742
B 70BG 4441
B 70BG 0540
B 70BG 0541
B 70BG 2840
B 70BG 2841
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70BH 5441
B 70BH 7742
B 70BH 4441
B 70BH 0540
B 70BH 0541
B 70BH 2840
B 70BH 2841
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
PC = profile cylinder
14
BELCANTO Panic – Fire protection fittings
Lever set
Dummy plate
Turn handle
Half set, inside
Half set outside
Knob backplate, outside
Inside handle w/o PC
Outside handle w/o PC
PC rosette inside
PC rosette outside
Knob
Entrance set
Backplate type Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
PC
PC 72
PC 72
PC 72
PC 72
B 70 B I 5141
B 70 B I 7242
B 70 B I 4141
B 70 B I 0140
B 70 B I 0141
B 70 B I 2140
B 70 B I 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type Knob model Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
Round knob
Round knob
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
B 70BL 5141
B 70BL 7242
B 70BL 4141
B 70BL 0140
B 70BL 0141
B 70BL 2140
B 70BL 2141
Knob model Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5Backplate type
Rosette
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Short plate square
Short plate rounded
Short plate square
Short plate rounded
Cylinder bore
without
without
without
PC 72
without
B 7000 5041
B 7000 2040
B 7000 2041
B 7000 4041
B 7000 0040
B 7000 0041
B 7000 0140
B 7000 0141
Knob model Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Cylinder bore
w/o PC rosette
without
without
B 70BR 5941
B 70BR 0040
B 70BR 0041
B 70BR 2040
B 70BR 2041
Knob model Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Cylinder bore
PC
PC 72
PC 72
B 70BC 5141
B 70BC 0140
B 70BC 0141
B 70BC 2140
B 70BC 2141
Knob model Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Cylinder bore
PC
PC 72
PC 72
B 70BF 5141
B 70BF 0140
B 70BF 0141
B 70BF 2140
B 70BF 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Knob model
Round knob
Round knob
Round knob
Cylinder bore
PC
PC 72
PC 72
B 7001 5141
B 7001 0140
B 7001 0141
B 7001 2140
B 7001 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 70BC 5941 ---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 7098 5141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 70BF 5941
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 7097 5141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Knob model
Knob model
Knob model
Knob model
Knob model
Round knob
Cylinder bore
w/o PC rosette
Cylinder bore
PC
Cylinder bore
w/o PC rosette
Cylinder bore
PC
Cylinder bore
w/o PC rosette B 7001 5841
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC = profile cylinder
15
BELCANTO – Fire protection and security fittings ES3
Security fittings ES3
Fire protection fittings ES3
Entrance set
Lever set
Entrance set
Entrance set
Lever set
Entrance set
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
B 7300 B I41 ---- ---- ---- ---- ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 7300 BF41 ---- ---- ---- ---- ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 7300 BC41 ---- ---- ---- ---- ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 7300 BA41
B 7300 BB41
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
B 7300 BD41
B 7300 BE41
----
----
----
----
----
----
----
----
----
----
Knob model
Knob model
Round knob
Knob model
Round knob
cranked
Knob model
Round knob
cranked
Round knob
cranked
Round knob
Round knob
Knob model
CC 72
Cylinder bore
CC 72
Cylinder bore
CC 72
Cylinder bore
CC 72
CC 72
Cylinder bore
CC 72
CC 72
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Type of set
Lever set
9 mm spindle
Type of set
Entrance set
9 mm spindle
Type of set
Entrance set
9 mm spindle
Type of set
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Type of set
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 72
CC 72
B 7300 BG41
B 7300 BH41
----
----
----
----
----
----
----
----
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Lever set
8 mm spindle
Lever set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
CC = cylinder cover
16
325
21,5
160
135
Lever model BELCANTO
Dimensioned drawings
Fire protection
ø55
38
8
50 4
134 4
180
31,5
130
21,5
180
50
248
21,5
139,5
75,5
8ø50 ø50
65
50
ø50
90
43
ø50
36
50
ø50
250 21,5
139,5
75,5
15
43
165
21,5
112
8
ø20
135
60
Knob types Backplate types
Round knob Ball-type knob
cranked round knob cranked ball-type knob
Lever handles available with 8, 9, 10 mm spindle; fixed backplate with friction washer (BKS differential bearing). The cranked door knob variants are non-handed.Clip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906. The mounting accessories are included in the items supplied (contract sets for door thickness 37 – 42 mm).
Product information
17
RR-BELCANTO – Contract fittings
Entrance set
9 mm spindle
Lever set
9 mm spindle
Lever set
8 mm spindle
Entrance set
8 mm spindle
Bath set
9 mm spindle
Bath set
8 mm spindle
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7060 5141
B 7060 7242
B 7060 4141
B 7060 0140
B 7060 0141
B 7060 2140
B 7060 2141
B 7060 5131
----
----
B 7060 0130
B 7060 0131
B 7060 2130
B 7060 2131
B 7060 5101
----
----
B 7060 0100
B 7060 0101
B 7060 2100
B 7060 2101
B 7060 5103
----
----
B 7060 0102
B 7060 0103
B 7060 2102
B 7060 2103
B 7060 5105
----
----
B 7060 0104
B 7060 0105
B 7060 2104
B 7060 2105
B 7060 5107
----
----
B 7060 0106
B 7060 0107
B 7060 2106
B 7060 2107
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7061 5141
B 7061 7242
B 7061 4141
B 7061 0140
B 7061 0141
B 7061 2140
B 7061 2141
B 7061 5103
----
----
B 7061 0102
B 7061 0103
B 7061 2102
B 7061 2103
B 7061 5105
----
----
B 7061 0104
B 7061 0105
B 7061 2104
B 7061 2105
B 7061 5107
----
----
B 7061 0106
B 7061 0107
B 7061 2106
B 7061 2107
B 7061 5101
----
----
B 7061 0100
B 7061 0101
B 7061 2100
B 7061 2101
B 7061 5131
----
----
B 7061 0130
B 7061 0131
B 7061 2130
B 7061 2131
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7081 5141
B 7081 7242
B 7081 4141
B 7081 0140
B 7081 0141
B 7081 2140
B 7081 2141
B 7081 5131
----
----
B 7081 0130
B 7081 0131
B 7081 2130
B 7081 2131
B 7081 5101
----
----
B 7081 0100
B 7081 0101
B 7081 2100
B 7081 2101
B 7081 5103
----
----
B 7081 0102
B 7081 0103
B 7081 2102
B 7081 2103
B 7081 5105
----
----
B 7081 0104
B 7081 0105
B 7081 2104
B 7081 2105
B 7081 5107
----
----
B 7081 0106
B 7081 0107
B 7081 2106
B 7081 2107
B 7082 5131
----
----
B 7082 0130
B 7082 0131
B 7082 2130
B 7082 2131
B 7082 5101
----
----
B 7082 0100
B 7082 0101
B 7082 2100
B 7082 2101
B 7082 5103
----
----
B 7082 0102
B 7082 0103
B 7082 2102
B 7082 2103
B 7082 5105
----
----
B 7082 0104
B 7082 0105
B 7082 2104
B 7082 2105
B 7082 5107
----
----
B 7082 0106
B 7082 0107
B 7082 2106
B 7082 2107
B 7060 5431
----
----
B 7060 0530
B 7060 0531
B 7060 2830
B 7060 2831
B 7060 5401
----
----
B 7060 0500
B 7060 0501
B 7060 2800
B 7060 2801
B 7060 5403
----
----
B 7060 0502
B 7060 0503
B 7060 2802
B 7060 2803
B 7060 5405
----
----
B 7060 0504
B 7060 0505
B 7060 2804
B 7060 2805
B 7060 5407
----
----
B 7060 0506
B 7060 0507
B 7060 2806
B 7060 2807
B 7061 5431
----
----
B 7061 0530
B 7061 0531
B 7061 2830
B 7061 2831
B 7061 5401
----
----
B 7061 0500
B 7061 0501
B 7061 2800
B 7061 2801
B 7061 5403
----
----
B 7061 0502
B 7061 0503
B 7061 2802
B 7061 2803
B 7061 5405
----
----
B 7061 0504
B 7061 0505
B 7061 2804
B 7061 2805
B 7061 5407
----
----
B 7061 0506
B 7061 0507
B 7061 2806
B 7061 2807
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
PC
PC 72
PC 72
PC 72
PC 72
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7082 5141
B 7082 7242
B 7082 4141
B 7082 0140
B 7082 0141
B 7082 2140
B 7082 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7060 5441
B 7060 7742
B 7060 4441
B 7060 0540
B 7060 0541
B 7060 2840
B 7060 2841
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Backplate type
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7061 5441
B 7061 7742
B 7061 4441
B 7061 0540
B 7061 0541
B 7061 2840
B 7061 2841
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
Cylinder bore
Cylinder bore
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
PC = profile cylinder
18
BELCANTO – Fire protection fittings
Inside handle w/o PC
PC rosette inside
Lever set
Dummy plate
Half set, inside
Half set outside
Knob backplate, outside
Entrance set
Outside handle w/o PC
PC rosette outside
Knob
Backplate type Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
PC
PC 72
PC 72
PC 72
PC 72
B 7064 5141
B 7064 7242
B 7064 4141
B 7064 0140
B 7064 0141
B 7064 2140
B 7064 2141
B 7064 5131
----
----
B 7064 0130
B 7064 0131
B 7064 2130
B 7064 2131
B 7064 5101
----
----
B 7064 0100
B 7064 0101
B 7064 2100
B 7064 2101
B 7064 5103
----
----
B 7064 0102
B 7064 0103
B 7064 2102
B 7064 2103
B 7064 5105
----
----
B 7064 0104
B 7064 0105
B 7064 2104
B 7064 2105
B 7064 5107
----
----
B 7064 0106
B 7064 0107
B 7064 2106
B 7064 2107
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Round knob
Round knob
Round knob
Round knob
Round knob
PC
PC 72
PC 72
PC 72
PC 72
B 7071 5141
B 7071 7242
B 7071 4141
B 7071 0140
B 7071 0141
B 7071 2140
B 7071 2141
B 7071 5131
----
----
B 7071 0130
B 7071 0131
B 7071 2130
B 7071 2131
B 7071 5101
----
----
B 7071 0100
B 7071 0101
B 7071 2100
B 7071 2101
B 7071 5103
----
----
B 7071 0102
B 7071 0103
B 7071 2102
B 7071 2103
B 7071 5105
----
----
B 7071 0104
B 7071 0105
B 7071 2104
B 7071 2105
B 7071 5107
----
----
B 7071 0106
B 7071 0107
B 7071 2106
B 7071 2107
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Short plate square
Short plate rounded
Short plate square
Short plate rounded
B 7000 5041
B 7000 2040
B 7000 2041
B 7000 4041
B 7000 0040
B 7000 0041
B 7000 0140
B 7000 0141
B 7000 5031
B 7000 0003
B 7000 0031
B 7000 0130
B 7000 0131
B 7000 5001
B 7000 0000
B 7000 0001
B 7000 0100
B 7000 0101
B 7000 5003
B 7000 0002
B 7000 0003
B 7000 0102
B 7000 0103
B 7000 5005
B 7000 0004
B 7000 0005
B 7000 0104
B 7000 0105
B 7000 5007
B 7000 2006
B 7000 2007
----
B 7000 2004
B 7000 2005
----
B 7000 2002
B 7000 2003
----
B 7000 2000
B 7000 2001
----
B 7000 2030
B 7000 2031
----
B 7000 0006
B 7000 0007
B 7000 0106
B 7000 0107
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7006 5141
B 7006 0140
B 7006 0141
B 7006 2140
B 7006 2141
B 7006 5131
B 7006 0130
B 7006 0131
B 7006 2130
B 7006 2131
B 7006 5101
B 7006 0100
B 7006 0101
B 7006 2000
B 7006 2001
B 7006 5103
B 7006 0102
B 7006 0103
B 7006 2002
B 7006 2003
B 7006 5105
B 7006 0104
B 7006 0105
B 7006 2004
B 7006 2005
B 7006 5107
B 7006 0106
B 7006 0107
B 7006 2006
B 7006 2007
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7007 5141
B 7007 0140
B 7007 0141
B 7007 2140
B 7007 2141
B 7007 5131
B 7007 0130
B 7007 0131
B 7007 2130
B 7007 2131
B 7007 5101
B 7007 0100
B 7007 0101
B 7007 2100
B 7007 2101
B 7007 5103
B 7007 0102
B 7007 0103
B 7007 2102
B 7007 2103
B 7007 5105
B 7007 0104
B 7007 0105
B 7007 2104
B 7007 2105
B 7007 5107
B 7007 0106
B 7007 0107
B 7007 2106
B 7007 2107
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 7001 5141
B 7001 0140
B 7001 0141
B 7001 2140
B 7001 2141
B 7001 5131
B 7001 0130
B 7001 0131
B 7001 2130
B 7001 2131
B 7001 5101
B 7001 0100
B 7001 0101
B 7001 2100
B 7001 2101
B 7001 5103
B 7001 0102
B 7001 0103
B 7001 2102
B 7001 2103
B 7001 5105
B 7001 0104
B 7001 0105
B 7001 2104
B 7001 2105
B 7001 5107
B 7001 0106
B 7001 0107
B 7001 2106
B 7001 2107
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette B 7007 5941 B 7007 5931 B 7007 5901 B 7007 5903 B 7007 5905 B 7007 5907
Backplate type Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette B 7097 5141 B 7097 5131 B 7097 5101 B 7097 5103 B 7097 5105 B 7097 5107
Backplate type Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette Round knob B 7001 5841 B 7001 5831 B 7001 5801 B 7001 5803 B 7001 5805 B 7001 5807
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette B 7006 5941 B 7006 5931 B 7006 5901 B 7006 5903 B 7006 5905 B 7006 5907
Backplate type
Backplate type
Backplate type
Backplate type
Backplate type
Backplate type
Backplate type
Backplate type
Knob model
Knob model
Knob model
Knob model
Knob model
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
Knob model
Knob model Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteAluminium UC5
Rosette
Cylinder bore
Cylinder bore
without
without
without
PC 72
without
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
w/o PC rosette
Cylinder bore
PC
Cylinder bore
w/o PC rosette
Cylinder bore
w/o PC rosette
Cylinder bore
PC B 7098 5141 B 7098 5131 B 7098 5101 B 7098 5103 B 7098 5105 B 7098 5107
PC = profile cylinder
19
BELCANTO – security fittings
Security fittings ES3
Entrance set
Lever set
Entrance set
Backplate type
CC 72
CC 72
CC 92
B 7300 1041
B 7300 1141
B 7301 1241
B 7300 1031
B 7300 1131
B 7301 1231
B 7300 1001
B 7300 1101
B 7301 1201
B 7300 1003
B 7300 1103
B 7301 1203
B 7300 1005
B 7300 1105
B 7301 1205
B 7300 1007
B 7300 1107
B 7301 1207
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Entrance set
8 mm spindle
Entrance set
10 mm spindle
Entrance set
9 mm spindle
Oblong plate,
rounded
Knob model
Round knob
cranked
Round knob
cranked
Round knob
cranked
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 72
CC 72
CC 92
B 7300 3541
B 7300 3641
B 7301 3741
Round knob
Round knob
Round knob
B 7300 3531
B 7300 3631
B 7301 3731
B 7300 3501
B 7300 3601
B 7301 3701
B 7300 3503
B 7300 3603
B 7301 3703
B 7300 3505
B 7300 3605
B 7301 3705
B 7300 3507
B 7300 3607
B 7301 3707
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Entrance set
8 mm spindle
Entrance set
10 mm spindle
Entrance set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 72
CC 72
CC 92
B 7300 6041
B 7300 6141
B 7301 6241
B 7300 6031
B 7300 6131
B 7301 6231
B 7300 6001
B 7300 6101
B 7301 6201
B 7300 6003
B 7300 6103
B 7301 6203
B 7300 6005
B 7300 6105
B 7301 6205
B 7300 6007
B 7300 6107
B 7301 6207
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium whiteType of set Aluminium UC5
Lever set
8 mm spindle
Lever set
10 mm spindle
Lever set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
Oblong plate,
rounded
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
CC = cylinder cover
20
325
21,5
160
135
Lever model OFFICE
Product information
Lever handles available with 8, 9, 10 mm spindle; fixed backplate with friction washer (BKS differential bearing). The cranked door knob variants are non-handed.Clip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.The vertical lever variant is provided with a detent mechanism to ensure a precise vertical position.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179.The mounting accessories are included in the items supplied (contract sets for door thickness 37 – 42 mm, fire-rated sets for door thickness 42 – 52 mm).For use on escape doors with a divided follower it is necessary to specify the lock position in addition to the door thickness (refer to page 60).
Dimensioned drawings
Backplate typesKnob types
ø55
38
8
50 4
134 4
180
31.5
130
21.5
180
50
248
21.5
139.5
75.5
8ø50 ø50
65
50
ø50
90
43
ø50
36
50
ø50
250 21.5
139.5
75.5
15
43
165
21.5
112
8
ø19R
100
140
65
Round knob Ball-type knob
cranked round knob cranked ball-type knob
Fire protection
21
OFFICE – Contract fittings
Entrance set
9 mm spindle
Lever set
9 mm spindle
Lever set
8 mm spindle
Entrance set
8 mm spindle
Bath set
9 mm spindle
Bath set
8 mm spindle
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70FG 5141
B 70FG 7242
B 70FG 4141
B 70FG 0140
B 70FG 0141
B 70FG 2140
B 70FG 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70FH 5141
B 70FH 7242
B 70FH 4141
B 70FH 0140
B 70FH 0141
B 70FH 2140
B 70FH 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70FJ 5141
B 70FJ 7242
B 70FJ 4141
B 70FJ 0140
B 70FJ 0141
B 70FJ 2140
B 70FJ 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70FK 5141
B 70FK 7242
B 70FK 4141
B 70FK 0140
B 70FK 0141
B 70FK 2140
B 70FK 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70FG 5441
B 70FG 7742
B 70FG 4441
B 70FG 0540
B 70FG 0541
B 70FG 2840
B 70FG 2841
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70FH 5441
B 70FH 7742
B 70FH 4441
B 70FH 0540
B 70FH 0541
B 70FH 2840
B 70FH 2841
Knob model
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
PC = profile cylinder
22
Knob
OFFICE – Fire protection fittings
Lever set
Dummy plate
Turn handle
Half set, inside
Half set outside
Knob backplate, outside
Inside handle w/o PC
Outside handle w/o PC
PC rosette inside
PC rosette outside
Entrance set
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70 F I 5141
B 70 F I 7242
B 70 F I 4141
B 70 F I 0140
B 70 F I 0141
B 70 F I 2140
B 70 F I 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Oblong plate, square
Oblong plate, rounded
B 70FL 5141
B 70FL 7242
B 70FL 4141
B 70FL 0140
B 70FL 0141
B 70FL 2140
B 70FL 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7000 5041
B 7000 2040
B 7000 2041
B 7000 4041
B 7000 0040
B 7000 0041
B 7000 0140
B 7000 0141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
B 70FR 5941
B 70FR 0040
B 70FR 0041
B 70FR 2040
B 70FR 2041
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70FC 5141
B 70FC 0140
B 70FC 0141
B 70FC 2140
B 70FC 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70FF 5141
B 70FF 0140
B 70FF 0141
B 70FF 2140
B 70FF 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7001 5141
B 7001 0140
B 7001 0141
B 7001 2140
B 7001 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70FC 5941 ---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7098 5141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70FF 5941
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7097 5141
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Short plate square
Short plate rounded
Short plate square
Short plate rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Knob model
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
Knob model
Knob model
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
Knob model
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
without
without
without
PC 72
without
Cylinder bore
w/o PC rosette
without
without
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
w/o PC rosette
Cylinder bore
PC
Cylinder bore
w/o PC rosette
Cylinder bore
PC
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC = profile cylinder
---- ---- ---- ---- ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5Backplate type
Rosette
Knob model
Round knob
Cylinder bore
w/o PC rosette B 7001 5841
23
OFFICE – Fire protection and security fittings ES3
Fire protection fittings ES3
Security fittings ES3
Entrance set
Lever set
Entrance set
Entrance set
Lever set
Entrance set
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
---- ---- ---- ---- ----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
---- ---- ---- ---- ----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
---- ---- ---- ---- ----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7300 F I41
Stainl. steel matt
B 7300 FF41
Stainl. steel matt
B 7300 FC41
Stainl. steel matt
B 7300 FA41
B 7300 FB41
B 7300 FD41
B 7300 FE41
----
----
----
----
----
----
----
----
----
----
Knob model
Knob model
Round knob
Knob model
Round knob
cranked
Knob model
Round knob
cranked
Round knob
cranked
Round knob
Round knob
Knob model
CC 72
Cylinder bore
CC 72
Cylinder bore
CC 72
Cylinder bore
CC 72
CC 72
Cylinder bore
CC 72
CC 72
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Type of set
Lever set
9 mm spindle
Type of set
Entrance set
9 mm spindle
Type of set
Entrance set
9 mm spindle
Type of set
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Type of set
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
CC 72
CC 72
B 7300 FG41
B 7300 FH41
----
----
----
----
----
----
----
----
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Type of set Aluminium UC5
Lever set
8 mm spindle
Lever set
9 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
CC = cylinder cover
24
Lever model BAUHAUS
Product information
Lever handles available with 8 mm and 9 mm spindle; fixed backplate with friction washer (BKS differential bearing). The cranked door knob variants are non-handed.Clip-on backplates. The mounting accessories are included in the items supplied (contract sets for door thickness 37 – 42 mm). Approved for use according to EN 1906.
Dimensioned drawings
Knob types Backplate types
ø55
38
8
50 4
134 4
180
31.5
130
21.5
180
50
248
21.5
139.5
75.5
8ø50
65
50
ø50
90
ø50
43
ø50
36
50
ø50
250 21.5
139.5
75.5
15
43
165
21.5
112
8
ø22
ø22
ø15
118
57
Round knob Ball-type knob
cranked round knob cranked ball-type knob
325
21.5
160
135
25
BAUHAUS – Contract fittings
Entrance set
9 mm spindle
Lever set
9 mm spindle
Lever set
8 mm spindle
Entrance set
8 mm spindle
Bath set
9 mm spindle
Bath set
8 mm spindle
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70AG 5141
B 70AG 7242
B 70AG 4141
B 70AG 0140
B 70AG 0141
B 70AG 2140
B 70AG 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Knob model Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70AH 5141
B 70AH 7242
B 70AH 4141
B 70AH 0140
B 70AH 0141
B 70AH 2140
B 70AH 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70AJ 5141
B 70AJ 7242
B 70AJ 4141
B 70AJ 0140
B 70AJ 0141
B 70AJ 2140
B 70AJ 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70AK 5141
B 70AK 7242
B 70AK 4141
B 70AK 0140
B 70AK 0141
B 70AK 2140
B 70AK 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70AG 5441
B 70AG 7742
B 70AG 4441
B 70AG 0540
B 70AG 0541
B 70AG 2840
B 70AG 2841
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
B 70AH 5441
B 70AH 7742
B 70AH 4441
B 70AH 0540
B 70AH 0541
B 70AH 2840
B 70AH 2841
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
PC
PC 72
PC 72
PC 72
PC 72
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
PC = profile cylinder
26
325
21,5
160
135
Lever model EMMAUS
Product information
Lever handles available with 8 mm and 9 mm spindle; fixed backplate with friction washer (BKS differential bearing). The cranked door knob variants are non-handed.Clip-on backplates.Security fittings as lever set or entrance set to DIN 18257 – ES3The cylinder cover is suitable for a cylinder protrusion of 12 to 19 mm.The vertical lever variant is provided with a detent mechanism to ensure a precise vertical position.All material versions approved for use on fire and smoke control doors to DIN 18273 and EN 1906, and for use on escape doors to EN 179.The mounting accessories are included in the items supplied (contract sets for door thickness 37 – 42 mm, fire-rated sets for door thickness 42 – 52 mm).For use on escape doors with a divided follower it is necessary to specify the lock position in addition to the door thickness (refer to page 60).
Dimensioned drawings
Knob types Backplate types
Fire protection
ø55
38
8
50 4
134 4
180
31.5
130
21.5
180
50
248
21.5
139.5
75.5
8ø50 ø50
65
50
ø50
90
43
ø50
36
50
ø50
250 21.5
139.5
75.5
15
43
165
21.5
112
8
R110
ø20
R110
157
87
Round knob Ball-type knob
cranked round knob cranked ball-type knob
27
EMMAUS – Contract fittings
Entrance set
9 mm spindle
Lever set
9 mm spindle
Lever set
8 mm spindle
Entrance set
8 mm spindle
Bath set
9 mm spindle
Bath set
8 mm spindle
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
PC = profile cylinder
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Knob model
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
PC
PC 72
PC 72
PC 72
PC 72
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Bath 78 mm
Bath 78 mm
Cylinder bore
B 70EG 5141
B 70EG 7242
B 70EG 4141
B 70EG 0140
B 70EG 0141
B 70EG 2140
B 70EG 2141
B 70EH 5141
B 70EH 7242
B 70EH 4141
B 70EH 0140
B 70EH 0141
B 70EH 2140
B 70EH 2141
Stainl. steel matt
B 70EJ 5141
B 70EJ 7242
B 70EJ 4141
B 70EJ 0140
B 70EJ 0141
B 70EJ 2140
B 70EJ 2141
Stainl. steel matt
B 70EK 5141
B 70EK 7242
B 70EK 4141
B 70EK 0140
B 70EK 0141
B 70EK 2140
B 70EK 2141
Stainl. steel matt
B 70EG 5441
B 70EG 7742
B 70EG 4441
B 70EG 0540
B 70EG 0541
B 70EG 2840
B 70EG 2841
Stainl. steel matt
B 70EH 5441
B 70EH 7742
B 70EH 4441
B 70EH 0540
B 70EH 0541
B 70EH 2840
B 70EH 2841
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
28
EMMAUS – Fire protection fittings
Lever set
Dummy plate
Turn handle
Half set, inside
Half set outside
Knob backplate, outside
Inside handle w/o PC
Outside handle w/o PC
PC rosette inside
PC rosette outside
Knob
Entrance set
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70 E I 5141
B 70 E I 7242
B 70 E I 4141
B 70 E I 0140
B 70 E I 0141
B 70 E I 2140
B 70 E I 2141
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70EL 5141
B 70EL 7242
B 70EL 4141
B 70EL 0140
B 70EL 0141
B 70EL 2140
B 70EL 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7000 5041
B 7000 2040
B 7000 2041
B 7000 4041
B 7000 0040
B 7000 0041
B 7000 0140
B 7000 0141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
B 70ER 5941
B 70ER 0040
B 70ER 0041
B 70ER 2040
B 70ER 2041
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70EC 5141
B 70EC 0140
B 70EC 0141
B 70EC 2140
B 70EC 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70EH 5141
B 70EG 0140
B 70EG 0141
B 70EH 2140
B 70EH 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7001 5141
B 7001 0140
B 7001 0141
B 7001 2140
B 7001 2141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70EC 5941 ---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7098 5141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 70EH 5941
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 7097 5141
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Wide backplate
Special oblong plate
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Oblong plate, square
Oblong plate, rounded
Special oblong plate
Short plate square
Short plate rounded
Short plate square
Short plate rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Short plate square
Short plate rounded
Oblong plate, square
Oblong plate, rounded
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Backplate type
Rosette
Knob model
Knob model
Round knob
Round knob
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
Knob model
Knob model
Round knob
Round knob
Round knob
Knob model
Knob model
Knob model
Knob model
Knob model
Round knob
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
PC 72
PC 72
Cylinder bore
without
without
without
PC 72
without
Cylinder bore
w/o PC rosette
without
without
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
w/o PC rosette
Cylinder bore
PC
Cylinder bore
w/o PC rosette
Cylinder bore
PC
Cylinder bore
w/o PC rosette B 7001 5841
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
PC = profile cylinder
29
EMMAUS – Fire protection and security fittings ES3
Security fittings ES3
----
----
----
----
----
----
----
----
----
----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
---- ---- ---- ---- ----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
---- ---- ---- ---- ----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
---- ---- ---- ---- ----
Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
----
----
----
----
----
----
----
----
----
----
B 7300 EA41
B 7300 EB41
Stainl. steel matt
B 7300 E I41
Stainl. steel matt
B 7300 EF41
Stainl. steel matt
B 7300 EC41
Stainl. steel matt
B 7300 ED41
B 7300 EE41
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
Type of set
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Type of set
Lever set
9 mm spindle
Type of set
Entrance set
9 mm spindle
Type of set
Entrance set
9 mm spindle
Type of set
Entrance set
8 mm spindle
Entrance set
9 mm spindle
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
B 7300 EG41
B 7300 EH41
----
----
----
----
----
----
----
----
----
----
Knob model
Round knob
cranked
Round knob
cranked
Knob model
Knob model
Round knob
Knob model
Round knob
cranked
Round knob
Round knob
Knob model
Knob model
CC 72
CC 72
Cylinder bore
CC 72
Cylinder bore
CC 72
Cylinder bore
CC 72
Cylinder bore
CC 72
CC 72
Cylinder bore
CC 72
CC 72
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5Type of set
Lever set
8 mm spindle
Lever set
9 mm spindle
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Entrance set
Lever set
Entrance set
Fire protection fittings ES3
Entrance set
Lever set
Entrance set
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
CC = cylinder cover
30
Wide backplate set
EMMAUS
RONDO-K
RONDO
Product information
Lever handles available with 8 mm and 9 mm spindle; fixed backplate with friction washer (BKS differential bearing). Listed items with 8 mm or 9 mm (fire-rated) spindle as a standard. Stainless steel version approved for use on fire and smoke control doors to DIN 18273 and EN 1906. Mounting accessories must be ordered separately (from page 58).
Dimensioned drawings
Knob types Lever models
Fire protection
134 4
180
31.5
130
21.5
180
ø50 ø50
65
50
ø50
90
43
ø50
36
50
ø20
147
60
ø20
R20
180
80
78
ø20
R110
R110
157
87
Round knob Ball-type knob
cranked round knob cranked ball-type knob
31
Wide backplate set
Lever set
Backplate type
PC 72
PC 72
B 7073 7242pointing right
B 7076 7242pointing right
B 7073 7342pointing left
B 7076 7342pointing left
Cylinder bore Stainl. steel mattType of set
Entrance set
8 mm spindle
Entrance set
9 mm fire-rated spindle
Wide backplate
Wide backplate
Round knob
Round knob
Backplate type
Bath 78 mm B 7050 7642pointing right
B 7050 7742pointing left
Cylinder bore Stainl. steel mattType of set
Bath set Wide backplate
Lever model RONDO
Entrance set
Backplate type
PC 72
PC 72
B 7050 7242
B 7053 7242
----
----
Knob model Cylinder bore Stainl. steel mattType of set
Lever set
8 mm spindle
Lever set
9 mm fire-rated spindle
Wide backplate
Wide backplate
Bath set
Lever set
Lever model EMMAUS
Entrance set
Bath set
Backplate type
PC 72
PC 72
B 70EG 7242
B 70EI 7242
----
----
Cylinder bore Stainl. steel mattType of set
Lever set
8 mm spindle
Lever set
9 mm fire-rated spindle
Wide backplate
Wide backplate
Backplate type
PC 72
PC 72
B 70EJ 7242pointing right
B 70EL 7242pointing right
B 70EJ 7342pointing left
B 70EL 7342pointing left
Cylinder bore Stainl. steel mattType of set
Entrance set
8 mm spindle
Entrance set
9 mm fire-rated spindle
Wide backplate
Wide backplate
Round knob
Round knob
Backplate type
Bath 78 mm B 70EG 7642pointing right
B 70EG 7742pointing left
Cylinder bore Stainl. steel mattType of set
Bath set Wide backplate
Lever set
Lever model RONDO-K
Entrance set
Bath set
Backplate type
PC 72
PC 72
B 70KG 7242
B 70KI 7242
----
----
Cylinder bore Stainl. steel mattType of set
Lever set
8 mm spindle
Lever set
9 mm fire-rated spindle
Wide backplate
Wide backplate
Backplate type
PC 72
PC 72
B 70KJ 7242pointing right
B 70KL 7242pointing right
B 70KJ 7342pointing left
B 70KL 7342pointing left
Cylinder bore Stainl. steel mattType of set
Entrance set
8 mm spindle
Entrance set
9 mm fire-rated spindle
Wide backplate
Wide backplate
Round knob
Round knob
Backplate type
Bath 78 mm B 70KG 7642pointing right
B 70KG 7742pointing left
Knob model
Knob model
Knob model
Knob model
Knob model
Knob model
Knob model
Knob model Cylinder bore Stainl. steel mattType of set
Bath set Wide backplate
Items with other features must be ordered under item number B 7099 9999 with precise details according to the following check list:
Type
of s
et
Leve
r mod
el
Spind
le
Knob
mod
el
Backp
late
type
Cylind
er b
ore
Mat
erial
/ fini
sh
Door t
hickn
ess /
lock
posit
ion
PC = profile cylinder
32
Dimension A
Push bars for medium-weight escape doors to EN 1125
PVC
BKS push bar for the use on smoke protection, fire protection and escape doors to DIN 18273 + DIN 4102 + EN 1634, with integrated
gear; 9 mm spindle. Approval to EN 1125 only in combination with approved BKS locks. With retaining spring;
suitable for medium-weight active and passive door leaves up to 200 kg. Cylinder bore: PC 72 mm, PC 92 mm (PC = profile cylinder), or without cylinder bore. Non-handed (DIN rh and lh usable) Finish:
– casing + lever arm of PVC, black matt; cross bar of aluminium F1 With mounting accessories for assembly with BKS short backplates (PC 72 mm) or BKS oblong backplates (PC 92 mm). The cross bar must be ordered separately (refer to door widths on page 33).
Dimensioned drawings
Product information
33
Push bar to EN 1125
Push bars for timber and steel doors
PVC black, cross bar aluminium F1Cylinder boreType of set
Active leaf without
cross bar
PC 72 B 7172 4100
PC 92 B 7192 4100
PVC black, cross bar aluminium F1Cylinder boreType of set
Passive leaf without
Cross bardummy B 7100 4100
Type of set Max. door width
Cross bar
Cross bar length
710 mm
785 mm
835 mm
960 mm
1150 mm
1500 mm
810 mm
885 mm
935 mm
1060 mm
1250 mm
1600 mm
B 7100 4200
B 7100 4207
B 7100 4201
B 7100 4202
B 7100 4203
B 7100 4206
Aluminium F1
PC = profile cylinder
34
1
2
1
72/9
2
x131
10
33
207
33,7
x - 120 = Length of bar
Dimension A
72
/92
20
6
33,7
33
124
x
Dimension A
1 2
Push bars for heavy-weight escape doors to EN 1125
Stainless steel
Aluminium
Product information
BKS push bar for the use on smoke protection, fire protection and escape doors to DIN 18273 + DIN 4102 + EN 1634, with integrated
stainless steel gear; 9 mm spindle. Approval to EN 1125 only in combination with approved BKS locks. With retaining spring;
suitable for heavy-weight active and passive door leaves up to 300 kg. Cylinder bore: PC 72 mm, PC 92 mm (PC = profile cylinder), or without cylinder bore. Non-handed (DIN rh and lh usable) Finish:
– Aluminium, F1
– Stainless steel, matt brushed With mounting accessories, intended for assembly with BKS short backplates (PC 72 mm) or BKS narrow stile long backplates (PC 92 mm). The cross bar must be ordered separately (refer to door widths on page 35). Stainless steel V4A version on request.
Dimensioned drawings
35
Push bar to EN 1125
Push bars for timber and steel doors
Cylinder boreType of set
Active leaf without
cross bar
PC 92 B 7192 5141 B 7192 5101
PC 72 B 7172 5141 B 7172 5101
Aluminium F1Stainl. steel matt
Cylinder boreType of set
Passive leaf without
Cross bardummy B 7100 5141 B 7100 5101
Aluminium F1
Cross bar lengthType of set Max. door width
Cross bar
710 mm
785 mm
835 mm
960 mm
1150 mm
1500 mm
810 mm
885 mm
935 mm
1060 mm
1250 mm
1600 mm
B 7100 4210
B 7100 4211
B 7100 4212
B 7100 4213
B 7100 4204
B 7100 4205
B 7100 4270
B 7100 4271
B 7100 4272
B 7100 4273
B 7100 4274
B 7100 4275
Aluminium F1Stainl. steel matt
Stainl. steel matt
Cylinder boreType of set
Active leaf without
cross bar
PC 72 B 7172 7141
PC 92 B 7192 7141
Stainl. steel matt
Cylinder boreType of set
Passive leaf without
Cross bardummy B 7100 7141
Stainl. steel matt
PC = profile cylinder
36
X
72
21
.5
112
33
21
.5
25
50
99
.5
188
11
Touch bar for escape doors to EN 1125
Product information
Dimensioned drawings
BKS touch bar for the use on smoke control, fire control and escape doors to DIN 18273 + DIN 4102 + EN 1634, with integrated
gear; 9 mm spindle. Approval to EN 1125 only in combination with approved BKS locks. With retaining spring; suitable for active and passive door
leaves.Cylinder bore: PC 72 mm, (PC = profile cylinder), or without cylinder bore. Non-handed (DIN rh / lh usable) Finish:
– Aluminium, F1
– Stainless steel (end cap stainless steel appearance) Including mounting accessories
37
Touch bar to EN 1125
Touch bar for timber and steel doors
PC = profile cylinder CH-RC = Swiss round cylinder
Cylinder boreType of set
Active leaf
DIN left
Active leaf
DIN left
PZ 72
CH-RZ 74
808 mm
1158 mm
1458 mm
808 mm
1158 mm
1458 mm
B 7150 1000
B 7150 1001
B 7150 1002
B 7150 1020
B 7150 1021
B 7150 1022
Aluminium F1Stainless steel
B 7150 3000
B 7150 3001
B 7150 3002
B 7150 3020
B 7150 3021
B 7150 3022
Dimension
Active leaf
DIN right
Active leaf
DIN right
PZ 72
CH-RZ 74
808 mm
1158 mm
1458 mm
808 mm
1158 mm
1458 mm
B 7150 1050
B 7150 1051
B 7150 1052
B 7150 1070
B 7150 1071
B 7150 1072
B 7150 3050
B 7150 3051
B 7150 3052
B 7150 3070
B 7150 3071
B 7150 3072
Cylinder boreType of set
Passive leaf
DIN leftdummy
808 mm
1158 mm
1458 mm
B 7150 1100
B 7150 1101
B 7150 1102
Aluminium F1Stainless steel
B 7150 3100
B 7150 3101
B 7150 3102
Dimension
Passive leaf
DIN rightdummy
808 mm
1158 mm
1458 mm
B 7150 1150
B 7150 1151
B 7150 1152
B 7150 3150
B 7150 3151
B 7150 3152
38
ø50 53 5314,5 5
43
ø20
147
60
256
256
139
76
139
76
21,5
21,5
Lever model RONDO
Product information
Lever handles available with 8 mm and 10 mm spindle; fixed backplate with friction washer. Security fittings as lever set or entrance set – ES0. Approved for use according to EN 1906.Mounting accessories are included in the items supplied: 8 mm spindle for door thicknesses of 38 – 45 mm
10 mm spindle for door thicknesses of 54 – 69 mm
Dimensioned drawings
Knob model Backplate typesLever model
39
RONDO – Security fittings ES0
RONDO – Security fittings ES0
Lever set
Entrance set
Backplate type
---- ---- B 7340 8501 ----
---- ---- B 7341 8901 ----
Knob model
PC 72
PC 92
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium UC5Type of set
Lever set
8 mm spindle
Lever set
10 mm spindle
Oblong plate,
rounded
Oblong plate,
rounded
---- ---- B 7340 8001 ----
---- ---- B 7341 8401 ----
Round knob
Round knob
Knob model
PC 72
PC 92
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium UC5Type of set
Entrance set
8 mm spindle
Entrance set
10 mm spindle
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
----
----
----
----
PC = profile cylinder
40
Lever model RONDO
Product information
Lever handles available with 8 mm and 10 mm spindle; fixed backplate with friction washer. Security fittings as lever set or entrance set to DIN 18257 – ES1 + ES2. Square backplate type only available for aluminium setThe cylinder cover is suitable for a cylinder protrusion of 10 to 15 mm. Approved for use according to EN 1906. Mounting accessories are included in the items supplied: 8 mm spindle for door thicknesses of 38 – 45 mm
10 mm spindle for door thicknesses of 54 – 69 mm
Dimensioned drawings
ø50 53 5314,5 5
43
ø20
147
60
256
256
139
76
139
76
21,5
21,5
Knob types Backplate typesLever model
41
RONDO – Security fittings ES1 + ES2
RONDO – Security fittings ES1
RONDO – Security fittings ES2
Entrance set
Entrance set
---- B 7325 8001 ----
---- B 7320 8001 ----
---- B 7326 8401 ----
B 7325 8041
B 7320 8041
B 7326 8441
B 7321 8441 ---- B 7321 8401 ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium UC5
----
----
----
----
B 7310 8041 ---- B 7310 8001 ----
B 7311 8441 ---- B 7311 8401 ----
Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium UC5
----
----
B 7320 8141 ---- B 7320 8101 ----
Round knob
Round knob
Round knob
Round knob
Knob model
Round knob
Round knob
Knob model
round knob,
cranked
Knob model
PC 72
CC 72
PC 92
CC 92
Cylinder bore
CC 72
CC 92
Cylinder bore
CC 72
Cylinder bore Stainl. steel matt Brass PVD Aluminium F1 Aluminium F2 Aluminium UC5
Type of set
Entrance set
8 mm spindle
Entrance set
8 mm spindle
Entrance set
10 mm spindle
Entrance set
10 mm spindle
Type of set
Entrance set
8 mm spindle
Entrance set
10 mm spindle
Type of set
Entrance set
8 mm spindle
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded
Oblong plate,
rounded
Backplate type
Oblong plate,
rounded----
PC = profile cylinder CC = cylinder cover
Entrance set
42
Lever model ANDANTE
Dimensioned drawings
ø21
141
60
ø50
43
ø55
38
8
43
165
21,5
112
8
Backplate typesRound knob
Product information
Lever handles available with 8 mm spindle; fixed backplate with friction washer; with retaining spring. Clip-on backplates, suitable for repeated assembly.Mounting accessories for door thicknesses of 38 – 45 mm are included in the items supplied. Approved for use according to EN 1906. Matching window handles page 48.
43
ANDANTE Standard contract fittings
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6050
B 7290 6059
B 7290 6066
B 7290 6067
B 7290 6051
B 7290 6058
Knob model Cylinder bore Stainl. steel matt
Lever set
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6053
B 7290 6069
B 7290 6061
Stainl. steel matt
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6052
B 7290 6068
B 7290 6060
Knob model
Round knob
Round knob
Round knob
Knob model
PC
WV 72
PC 72
WV 72
WV
PC 72
PC
PC 72
PC 72
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Cylinder bore Stainl. steel matt
Entrance set
Bath set
PC = profile cylinder WV = warded version
44
Lever model CRESCENDO
Product information
Lever handles available with 8 mm spindle; fixed backplate with friction washer; with retaining spring. Clip-on backplates, suitable for repeated assembly.Mounting accessories for door thicknesses of 38 – 45 mm are included in the items supplied. Approved for use according to EN 1906. Matching window handles page 48.
Dimensioned drawings
Backplate typesRound knob
ø50
43
ø55
38
8
43
165
21.5
112
8
ø21
130
60
45
CRESCENDO Standard contract fittings
Lever set
Entrance set
Bath set
Backplate type
Rosette
Short plate square
Short plate rounded
PC
WV 72
PC 72
WV 72
WV
PC 72
B 7290 6110
B 7290 6119
B 7290 6126
B 7290 6127
B 7290 6111
B 7290 6118
Knob model Cylinder bore Stainl. steel matt
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6113
B 7290 6129
B 7290 6121
PC
PC 72
PC 72
Cylinder bore Stainl. steel mattKnob model
Round knob
Round knob
Round knob
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6112
B 7290 6128
B 7290 6120
Knob model
Bath
Bath 78 mm
Bath 78 mm
Cylinder bore Stainl. steel matt
PC = profile cylinder WV = warded version
46
Lever model FORTE
Product information
Lever handles available with 8 mm spindle; fixed backplate with friction washer; with retaining spring. Clip-on backplates, suitable for repeated assembly.Mounting accessories for door thicknesses of 38 – 45 mm are included in the items supplied. Approved for use according to EN 1906. Matching window handles page 48.
Dimensioned drawings
Backplate typesRound knob
ø50
43
ø55
38
8
43
165
21.5
112
8
ø21
130
56
47
FORTE Standard contract fittings
Lever set
Entrance set
Bath set
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6170
B 7290 6179
B 7290 6186
B 7290 6187
B 7290 6171
B 7290 6178
Stainl. steel matt
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6173
B 7290 6189
B 7290 6181
Stainl. steel matt
Backplate type
Rosette
Short plate square
Short plate rounded
B 7290 6172
B 7290 6188
B 7290 6180
Knob model
Knob model
Round knob
Round knob
Round knob
Knob model
PC
WV 72
PC 72
WV 72
WV
PC 72
Cylinder bore
PC
PC 72
PC 72
Cylinder bore
Bath
Bath 78 mm
Bath 78 mm
Cylinder bore Stainl. steel matt
PC = profile cylinder WV = warded version
48
Stainless steel window handles
Product information
Stainless steel window handles 90 degree detent 10 mm positioning plugs (adapter for 12 mm on request) 7 mm spindle protruding 30 mm Clip-on cover rosette, for repeated assembly
Dimensioned drawings
FORTE
CRESCENDO ANDANTE DIRIGENT
OFFICE
ø21
126
60
12043
20
140
65
ø21
125
56
32
12
70
ø21
141
60
49
Stainless steel window handles
Forte
Office
Dirigent
Crescendo
Rosette design
Rosette, oval B 7290 6016
Stainl. steel matt
Rosette design
Rosette, oval B 7290 6019
Stainl. steel matt
Rosette design
Rosette, oval B 7290 6018
Stainl. steel matt
Rosette design
Rosette, oval B 7290 6000
Stainl. steel matt
Rosette design
Rosette, oval B 7290 6008
Stainl. steel matt
Andante
50
Accessories for contract work30
40
100
100
38
38
ø65
10
38
38
ø65
15
ø19
ø28
ø28
ø28
3106
76
46
3
3
ø19
ø19
25
38
36
ø62
Floor-mounted
door stop I
Ladies Gentlemen Handicapped Directional arrow
Floor-mounted
door stop II
Wall-mounted door stop
Dimensioned drawings
Product information
Reference signs:
– Stainless steel
– Black print
– Adhesive strip on the back
Floor/wall-mounted door stops:
– Stainless steel
– With mounting accessories
– Spacer plates for type II as an option
51
Wandstopper
Accessories for contract work
Floor-mounted door stop I
Variant
40 x 30 mm B 7122 0040
Stainl. steel matt
Floor-mounted door stop II
Variant
---- B 7122 0000
Stainl. steel matt
Spacer plate for floor-mounted door stop II
Wall-mounted door stop
Ladies
Variant
Ladies B 7121 1040
Stainl. steel matt
Gentlemen
Variant
Gentlemen B 7121 2040
Stainl. steel matt
Handicapped
Variant
Handicapped B 7121 4040
Stainl. steel matt
Directional arrow
Variant
Directional arrow B 7121 3040
Stainl. steel matt
Variant
19 mm x 46 mm
19 mm x 76 mm
19 mm x 106 mm
B 7122 0005
B 7122 0006
B 7122 0007
Stainl. steel matt
Variant
10 mm B 7122 0001
15 mm B 7122 0002
black
52
Door holder
6944
96
80
56
36
20
90
124,5
26,5
27
40
182
330
85
55
40
27
1801
33
40
Dimensioned drawings
3934 large
3934 medium3933 small
Product information
Door holders 3934/3933 to be attached to the door leaf:
– Type 3934 large with 100 mm travel
– Type 3934 medium with 30 mm travel
– Type 3933 small with 30 mm travel
53
Door holder
B 3934 0109 B 3934 0115 B 3934 0117----3934 large
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 3934 0101 B 3934 0137 B 3934 0139----3934 medium
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 3933 0101 B 3933 0137 B 3933 0139----3933 small
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
B 6944 0007 B 6944 0009 ----B 6944 00046944
Variant Aluminium F1 Aluminium F2 Aluminium white Aluminium UC5
54
Architects range
OFFICE
BAUHAUS
Knob types
Design recommendations
Round, cranked Ball-type, cranked Round knob Ball-type knob
Intrada
Belcanto
Office
Rondo
Emmaus
Bauhaus Belcanto-P
Lever models
55
The idea
The archtictects fitting range of BKS allows for the design of individual backplate forms.
Regardless of whether a company logo is to be formed or freely designed contours, the possibilities are almost
endless.
The fittings are manufactured from stainless steel and naturally feature the proven BKS bearing technology.
Use the fax reply form on page 56 / 57 to contact us directly or speak to one our field consultants.
Product information
Lever handles available with 8, 9, 10 mm spindle; fixed backplate with friction washer (BKS differential bearing). The cranked door knob variants are non-handed. Backplates of 4 mm with individual contours. Stainless steel fixing elements, sets fastened with visible fixing screws.The mounting accessories are included in the items supplied.
56
Return address:
Yes I am interested in the new BKS design possibilities. Please send me a non-obligatory offer.
BKS GmbH
Heidestr. 71 · 42549 Velbert
Telephone: +49 - (0) 2051 201 - 0
Fax: +49 - (0) 2051 201 - 431
www.g-u.com
FAX REPLY +49 - (0) 2051 201 - 431
Please send us further information concerning the BKS fitting range.
Do n
ot
forg
et t
o i
nd
ica
te t
he
retu
rn a
dd
ress
!
57
BKS GmbH
Heidestr. 71 · 42549 Velbert
Telephone: +49 - (0) 2051 201 - 0
Fax: +49 - (0) 2051 201 - 431
www.g-u.com
Yes I am interested in the new BKS design possibilities. Please send me a non-obligatory offer.
Return address:
FAX REPLY +49 - (0) 2051 201 - 431
Do n
ot fo
rget to
ind
icate th
e return
ad
dress!
Please send us further information concerning the BKS fitting range.
58
Door thickness min. 23 min. 23
Door thickness + 23 + 23 = spindle length
X min. 23
X + 23 = spindle length
Fixing accessories
Spindles
Calculation of spindle length for single-sided screw attach-
ment
Calculation of spindle length
Note: Spindles for panic bars require a deduction of
15 mm from the lengths specified below!
Specification clause
BKS spindle consisting of:
8 / 8.5 / 9 / 10 mm square spindle with special spot-faced surfaces providing a non-loosening connection with the fittings.
Dimension L:.................
Spindle length L
mm
100
115
130
145
50
65
70
80
90
100
115
130
145
160
100
115
130
145
Square spindle
mm
8
8
8
8
9
9
9
9
9
9
9
9
9
9
10
10
10
10
Door thickness
mm
37 – 52
52 – 67
67 – 82
82 – 97
--
--
--
17 – 27
27 – 37
37 – 52
52 – 67
67 – 82
82 – 97
97 – 112
37 – 52
52 – 67
67 – 82
82 – 97
Order number
B 7644 0800
B 7644 0801
B 7644 0802
B 7644 0803
B 7644 0908
B 7644 0907
B 7644 0909
B 7644 0905
B 7644 0906
B 7644 0900
B 7644 0901
B 7644 0902
B 7644 0903
B 7644 0904
B 7644 1000
B 7644 1001
B 7644 1002
B 7644 1003
59
Entrance set
Push bar
15 min. 23 Door thickness (DT)
15 max. 10
Touch bar 15 min. 20
max. 26
Door thickness (DT)
Door thickness (DT)
Fixing accessories
Calculation of spindle length
Note: Threaded spindles for panic bars require a
deduction of 15 mm from the lengths
specified below!
Threaded spindles
Specification clause
BKS threaded spindle consisting of:
8 / 8.5 / 9 / 10 mm square spindle with special spot-faced surfaces providing a non-loosening connection with the fittings; with M8 thread
for BKS entrance sets.
Dimension L:.................
Spindle length L
mm
75
85
95
105
115
135
50
60
70
75
85
95
105
115
135
75
85
95
105
115
135
Square spindle
mm
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
10
10
10
10
10
10
Door thickness
mm
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 107
--
--
--
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 107
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 107
Order number
B 7630 0801
B 7630 0802
B 7630 0803
B 7630 0804
B 7630 0805
B 7630 0806
B 7630 0906
B 7630 0907
B 7630 0900
B 7630 0901
B 7630 0902
B 7630 0903
B 7630 0904
B 7630 0905
B 7630 0908
B 7630 1001
B 7630 1002
B 7630 1003
B 7630 1004
B 7630 1005
B 7630 1006
60
X (LI=inside) Y (LO=outside)
DTI DTO min. 23 min. 23 Lever set
Push bar DTI DTO max. 10 min. 23
DTI + 23 = length inside part (LI)DTO + 23 = length outside part (LO)
DTI DTO min. 20 min. 23 Touch bar max. 26
Fixing accessories
Divided spindles for escape door fittings
Note: Fixing elements and the fitting set must be consi-
dered as a unit according to DIN 18273. Therefore,
only BKS spindles and screws must be used for
BKS fittings on fire control, smoke control, and
escape doors!
Calculation of spindle length
Lever set
SI
18 – 23
23 – 28
28 – 33
33 – 38
38 – 43
43 – 48
48 – 53
53 – 58
DTO
45
50
55
60
65
70
75
80
18 – 23
50
B 7676 0019
B 7676 0044
B 7676 0057
B 7676 0062
B 7676 0069
B 7676 0074
B 7676 0081
B 7676 0086
23 – 28
55
B 7676 0038
B 7676 0020
B 7676 0058
B 7676 0063
B 7676 0070
B 7676 0075
B 7676 0082
B 7676 0088
28 – 33
60
B 7676 0039
B 7676 0045
B 7676 0003
B 7676 0064
B 7676 0014
B 7676 0076
B 7676 0016
B 7676 0090
33 – 38
65
B 7676 0026
B 7676 0046
B 7676 0059
B 7676 0021
B 7676 0071
B 7676 0077
B 7676 0083
B 7676 0092
38 – 43
70
B 7676 0011
B 7676 0047
B 7676 0012
B 7676 0065
B 7676 0004
B 7676 0078
B 7676 0017
B 7676 0095
43 – 48
75
B 7676 0040
B 7676 0027
B 7676 0060
B 7676 0066
B 7676 0072
B 7676 0022
B 7676 0084
B 7676 0097
48 – 53
80
B 7676 0002
B 7676 0028
B 7676 0013
B 7676 0067
B 7676 0015
B 7676 0094
B 7676 0005
B 7676 0106
53 – 58
85
B 7676 0085
B 7676 0087
B 7676 0089
B 7676 0091
B 7676 0093
B 7676 0096
B 7676 0105
B 7676 0098
LO
LI
Specification clause
BKS divided spindle for BKS escape door fittings in combination with divided followers in panic locks, consisting of:
Outer part of spindle / inner part of spindle, and fixing screw.
9 mm square spindle with special spot-faced surfaces providing a non-loosening connection with the levers or panic bars.
Fixing screw with anti-twist safeguard
Spindles halves are marked with embossed letters (I=inside, A=outside)
Dim LI (spindle length inside): ......... / Dim LO (spindle length outside): .........
Lever half set / Push bar / Touch bar
LI
25
30
35
40
45
50
55
60
65
70
B 7676 0390
B 7676 0309
B 7676 0319
B 7676 0329
B 7676 0339
B 7676 0349
B 7676 0359
B 7676 0369
B 7676 0379
B 7676 0389
B 7676 0391
B 7676 0300
B 7676 0310
B 7676 0320
B 7676 0330
B 7676 0340
B 7676 0350
B 7676 0360
B 7676 0370
B 7676 0380
B 7676 0392
B 7676 0301
B 7676 0311
B 7676 0321
B 7676 0331
B 7676 0341
B 7676 0351
B 7676 0361
B 7676 0371
B 7676 0381
B 7676 0393
B 7676 0302
B 7676 0312
B 7676 0322
B 7676 0332
B 7676 0342
B 7676 0352
B 7676 0362
B 7676 0372
B 7676 0382
B 7676 0394
B 7676 0303
B 7676 0313
B 7676 0323
B 7676 0333
B 7676 0343
B 7676 0353
B 7676 0363
B 7676 0373
B 7676 0383
25 30 35 40 45 LO
B 7676 0395
B 7676 0304
B 7676 0314
B 7676 0324
B 7676 0334
B 7676 0344
B 7676 0354
B 7676 0364
B 7676 0374
B 7676 0384
B 7676 0396
B 7676 0305
B 7676 0315
B 7676 0325
B 7676 0335
B 7676 0345
B 7676 0355
B 7676 0365
B 7676 0375
B 7676 0385
B 7676 0397
B 7676 0306
B 7676 0316
B 7676 0326
B 7676 0336
B 7676 0346
B 7676 0356
B 7676 0366
B 7676 0376
B 7676 0386
B 7676 0398
B 7676 0307
B 7676 0317
B 7676 0327
B 7676 0337
B 7676 0347
B 7676 0357
B 7676 0367
B 7676 0377
B 7676 0387
B 7676 0399
B 7676 0308
B 7676 0318
B 7676 0328
B 7676 0338
B 7676 0348
B 7676 0358
B 7676 0368
B 7676 0378
B 7676 0388
50 55 60 65 70
61
Fixing accessories
Steel fixing screws
Specification clause
Fixing screws for BKS fittings consisting of:
Phillips countersunk-head screw M5 according to ISO 7046, galvanized and chrome-plated iron
Door thickness:.................... Screw length:....................
Stainless steel fixing screws
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Dimensions Door thickness Description
Description
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Countersunk screw
Dimensions
M5 x 40
M5 x 50
M5 x 60
M5 x 70
M5 x 80
M5 x 90
M5 x 100
Door thickness
37 – 47
47 – 57
57 – 67
67 – 77
77 – 87
87 – 97
97 – 107
Description
B 7660 0100
B 7660 0101
B 7660 0102
B 7660 0103
B 7660 0104
B 7660 0105
B 7660 0106
Description
M5 x 35
M5 x 40
M5 x 50
M5 x 60
M5 x 70
M5 x 80
M5 x 90
M5 x 100
37 – 42
42 – 52
52 – 62
62 – 72
72 – 82
82 – 92
92 – 102
102 – 117
B 7660 0008
B 7660 0001
B 7660 0002
B 7660 0003
B 7660 0004
B 7660 0005
B 7660 0006
B 7660 0007
Specification clause
Fixing screws for BKS specialty stainless steel fittings with visible screw connections, consisting of:
Phillips countersunk-head screw M5 according to ISO 7046, stainless steel
Door thickness:.................... Screw length:....................
Mounting accessories for security fittings ES3
Description
Mounting accessories
Mounting accessories
Mounting accessories
Mounting accessories
Mounting accessories
Door thickness
39 – 54
54 – 69
69 – 84
84 – 94
94 – 114
Description
B 7660 0070
B 7660 0071
B 7660 0072
B 7660 0073
B 7660 0078
Consisting of screws + mounting tools. Spindles must be ordered separately!
62
Review
Panic and emergency exit devices were never clearly regulated by
product standards. Only “... easy opening, ... from the interior, ... at
the full width” was required in these codes. However, the important
term of “easy opening” was never described with reproducible
values. There was also no clear regulation as to how door fittings
must be designed, so that people would not injure themselves on
them. The interplay of various individual components was never
subjected to a real-life vandalism test. The customer was generally
left alone with problems in the assembly or in the interplay of pro-
ducts by various manufacturers. Most of the specifications came
from the area of fire protection and always required the appropriate
verification of suitability for fire-rated doors.
New uniform standards for the equipment of escape doors are
now valid in Europe. These standards describe in detailed test spe-
cifications how “easy opening” can be measured. Moreover, they
contain directives specifying the design and function of fittings.
An essential innovation: Lock, fitting and assembly accessories
are tested together and may only be used as a tested unit. Thanks
to practical tests such as vandalism tests and to single products
being made compatible with each other, the assembly of fittings is
simplified and their long-range function clearly improved. All new
products must be approved accordingly since 04/01/2003 and be
marked with a classification code along with the CE-marking. The
classification code indicates the range of approved applications
and makes it easy to verify the proper product combination during
a later building inspection.
The protection of people in buildings does not only play an impor-
tant role in the event of a fire, but also in panic situations that might
occur every day.
Panic and emergency exit devices for Europe
Present
63
Panic and emergency exit devices for Europe
Two types of escape doors – two new EU standards. Escape door
systems within the context of the new standards are divided into
emergency exit and panic exit devices.
This means that escape doors must be designed as panic exit
devices or as emergency exit devices depending on the respective
application.
Emergency exit devices according to EN 179 are designed for
buildings or building sections which are not open to the public, i.e.
where users are familiar with the function of the escape door.
They are suitable for all applications where public traffic may be
excluded. Secondary exits or doors in building sections frequented by
authorised persons only must also be equipped according to EN 179.
Application examples:
Private housing areas
Class rooms in schools
Administrative buildings of industrial concerns
not accessible to the public
Areas of event buildings not accessible to the public
Areas in airports, banks, shopping centres, etc.
not accessible to the public.
As operating elements this standard specifies lever handles or push
pads.
Recommended use:
Exit devices to EN 179 should be applied in areas where public
use may generally be excluded.
Recommended use:
If a later use of the building is not clearly defined at the
beginning of planning, panic exit devices to EN 1125
should preferably be installed.
This also applies to a modified use at a future time. Otherwise,
considerable retrofitting operations may become necessary.
Panic exit devices according to EN 1125 are used in public
buildings or building sections where visitors not familiar with the
function of the escape doors must be able to operate these without
instructions in the event of an emergency.
This specifically includes:
Hospitals
Escape routes in schools
Public administration
Events buildings
Airports
Shopping centres, etc.
As operating elements this standard specifies push bars or touch
bars reaching over the total width (or at least 60 %) of the door leaf.
Different locking systems for different fields of application
64
Panic and emergency exit devices for Europe
Easy opening of escape routes through panic exit devices
according to EN 1125
The exit device is checked for suitability in two different tests.
The first test is carried out without an initial load being applied to
the door leaf; the door must open automatically in the direction of
the escape route at a maximum operating force of 80 Newton. In the
second test carried out with an initial load of 1000 Newton applied
to the door leaf, the operating force must not exceed 220 Newton to
open the door. These values also apply to double leaf door units and
to exit devices which have additional locking elements such as ver-
tical rods or multipoint locks. As with EN 179, the locking systems
are subjected to a vandalism test and an operational durability
test with a permanent load of 25 Newton to prove their everyday
suitability.
Easy opening of escape routes through
emergency exit devices according to EN 179
These are tested at a maximum opening force of 70 Newton applied
vertically onto the lever handle. With all locking elements released,
the door must open in the direction of the escape route.
Little friction of the lever bearing and the smooth interplay of the
locking elements and the appropriate keepers in the door frame are
important here. Moreover, in order to prove their everyday suitability,
these locking systems are subjected to a vandalism test and an
operational durability test with a permanent load of 25 Newton.
Note:
Only the new standards EN 179 and EN 1125 provide a measu-
rable reference for the “easy opening” of escape doors.
Test 1: Door leaf without initial load
Test 2: Door leaf with an initial load of 1000 N
Main requirements for escape doors:
Doors in rescue routes must permit opening at all times
from the inside easily and at the full width.
Esacpe doors must open the escape route within
1 second with a hand movement without the use of a key
(EN 1125 / EN 179). Escape doors must open outwards.
Rescue routes must not be blocked.
Door fittings must be designed in a way that people‘s clothing
will not catch on them.
The open end of the lever must be designed in a way that it
points to the surface of the door leaf, in order to prevent
injuries (EN 179).
65
Panic and emergency exit devices for Europe
Escape routes must open in one movement
This means that on double leaf door units only full panic systems
are permitted providing the opening of both door leaves, even when
only the handle on the inactive leaf is operated. With the use of
G.U-BKS locks, this requirement can be fulfilled in any location
thanks to a choice of various panic functions for single and double
leaf door assemblies. Further extensive safety requirements may
be met with additional electromechanic options allowing for the
integration of intelligent escape door control and access control
systems. Mechanics and electronics are complemented here in one!
Escape doors must open outwards
This requirement is already known from various codes. It is incor-
porated in the new standards which specify locking systems for
outward opening escape doors exclusively. Escape door functions
“opening inward” known for special cases, cannot be permitted
according to EN 179 and EN 1125. With the use of push bars and
touch bars to EN 1125, this would not be logical after all.
Rescue routes must not be blocked
Any kind of impediment in the floor area – except for thresholds up
to a certain height – are not permitted. Human life is saved on freely
accessible escape routes only.
Fittings must be designed to prevent injury to people
With these standards, design variants are regulated for the first time.
The adequacy of particular fittings can be easily verified by means
of dimensioned graphics.
Graphic 1 shows the current requirements for lever handles accor-
ding to EN 179. Here, precise dimensions of the lever end inclined
toward the door leaf are missing among other specifications. Since
the design possibilities according to this graphic are limited to
U-shaped models, designs according to graphic 2 are planned for
the next updated issue of the standard. Current licenses, however,
already take this amendment into account; otherwise architects and
building contractors would not have the creative scope they desire,
and the manufacturers of fittings could offer only a very limited
range of lever handles.
Graphic 2
Graphic 1
66
CE marking symbol
Identification no. of the certification body + no. of the EC certificate of conformity
Number and year of this European Standard
Category of use: Grade 3 = high frequency applications
DIN EN 1125; 2008
0432 BPR 0002 2008
BKS GmbH Heidestr. 71 D-42549 Velberrt
Durability:
Active leaf grade 7 = 200.000 cycles
Inactive leaf grade 6 = 100.000 cycles
Door mass: Grade 5 = up to 100 kg
Grade 6 = up to 200 kg
Grade 7 = up to 200 kg
Grade 0 = not approved for use on fire/smoke doors
Grade A = approved for smoke doors
Grade B = approved for fire/smoke doors
Suitability
for use on fire/
smoke doors:
Manufacturer + address
Year in which the
marking was applied
Type of horizontal bar operation:
Type A = push bar Type B = touch bar
Projection of horizontal bar:
Grade 1 = large projection
Grade 2 = standard projection
Security (burglary protection):Grade 2 = minimum specification, the only one to be used
Corrosion resistance:
Grade 3 = high resistance
Grade 4 = very high resistance
Safety:
Grade 1 = top grade, the only one to be used
Field of door application:
Category A: single door, double door*
Category B: single door only
Category C: double door**
* active or inactive leaf of double door ** inactive leaf only
Panic and emergency exit devices for Europe
Locks and fittings must be provided with test identification codes
(DO numbers) and with the required CE-marking.
This allows a locking system to be identified as approved during
assembly and fincal acceptance.
We are aware that our product range is very extensive due to the
numerous situations in buildings. For this reason, we have deve-
loped logos with which we additionally mark our products. For
the sake of clarity, partners of G.U-BKS also use these logos, thus
enabling you to combine solutions from different catalogues to meet
your individual requirements.
CE Marking
BKS locking systems have the following certification numbers:
DIN EN 179 = 0432 BPR 0003
DIN EN 1125 = 0432 BPR 0002
The first purpose of CE marking is to simplify the movement of
goods within the EC. Another purpose is to indicate the approved
product use by the classification code on the CE label.
Our locks are visibly marked on the forends with the label explained
below.
Many of them are approved for use in locking systems according
to EN 179 and EN 1125. Their approved use is recognisable by the
classification code on the label.
The field of application is to be taken from the respective product
description.
67
Panic and emergency exit devices for Europe
Fittings approved to EN 179
Various lever models are tested and approved for the use on con-
tract doors.
The illustrated models only represent a part of our programme. We
are continuously developing new products that correspond to the
requirements of our customers.
Upon special request, we can also design individual models for your
contract work which will conform to the requirements of EN 179.
Fittings approved to EN 1125
Only operational elements spanning the door width are approved
as fittings to 1125. Push bars or touch bars are such operational
elements.
The illustrated operational elements provide an overview of our
programme.
Thanks to a variety of finishes, it is possible to create a harmonious
appearance with regard to the fittings on other doors in the building.
Special fitting solutions for slim profiles to avoid material deforma-
tion and injury are also contained in our programme.
You can recognise BKS fittings by the test labels attached to the
bottom side of the mounting plates.
The appropriate BKS locks are marked visibly on the forend.
The table on the right shows which combinations are approved.
By means of the test labels it is possible to identify appropriate locks
and fittings in the event of separate delivery.
Note:
Approval and application as emergency exit device to EN 179
or panic exit device to EN 1125 are only possible in conjunction
with the appropriate EC conformity certificate.
RR-BELCANTO-P
RR-RONDO
Narrow stile doors
EMMAUS
BELCANTO-PRONDO
OFFICE
Timber and steel doors
BKS locks BKS fittings
Timber and steel doors
DO 5.0
DO 5.1
DO 9.2
DO 20.10.1
Narrow stile doors DO 9.1
DO 9.6
DO 20.10.2
SECURY DO 5.1
DO 9.1
DO 20.10.1
Touch bar with integral lock
Push rod, PVC
Push rod, stainless steel
Push rod, aluminium
Touch bar
Push bar with integral lock
68
Fittings
Control locks Square spindle
Floor socket
Vertical rods Screws
Latch plates Locks
Push bar
Panic and emergency exit devices for Europe
Locking systems as unit
Practical experiences in the combination of products by various
manufacturers have shown that not all combinations function
smoothly without an examination. For this reason, one of the essen-
tial features of the new requirements was defined:
Lock, fittings and accessories may only be tested, marked and
assembled as a unit.
The user as well as the planner thereby receive a guarantee that the
system was tested and approved for compatibility.
Extensive durability and manipulation tests guarantee a safe inter-
action of all components.
69
Approval and certification
Exit devices according to EN 179 and EN 1125 must only be
tested by notarized institutes (authorized in Europe). Here, we are
working together with the Material Testing Authority of North Rhine-
Westphalia (MPA/NRW) in Dortmund.
The additional outside supervision of the products is also performed
by MPA and is documented by the Ü-marking on the products.
Shipment according to EN 179 and EN 1125
The components of approved exit devices may be tendered sepa-
rately. Depending on the sales method, separate deliveries directly
to the location are also possible. The responsibility for the correct
composition and assembly is then given to the assembly company.
In this event, the door manufacturer and possibly participating dea-
lers are subject to reporting requirements.
Sales partners of the G.U Group are under the obligation to point
out the adherence to these specifications to their customers. These
partners are authorized to use the illustrated label.
Standardised operation throughout Europe
The operation of escape doors will be standardised in Europe in the
future. The protection of human life is placed above the protection
of property.
Both standards are generally implemented and valid in the EC.
In many countries the use of push rods or touch bars similar to
EN 1125 has been common practice for many years already.
Panic and emergency exit devices for Europe
70
Features of security fittings
1
2
3
4
5
Applications
The security fittings may be used on house or apartment entrance doors.
Depending on the product variant, contract fittings are also approved for fire control, smoke control, and escape doors.
Coming with different backplate widths, they are suitable for timber and steel doors, or narrow stile doors.
Creative design options
By combining various lever and knob models, it is possible to create fitting combi-
nations available as entrance set or as lever set.
Protection of the locking cylinder
The optional cylinder covering protects the
cylinder against being withdrawn or twisted
off forcibly. The plug security plate is
suitable for current key sizes.
Security backplate outside
Depending on the security grade, the outside backplate issecured
by hardened elements against manipulation by drilling.
Material options
Anodized or colour coated aluminium Stainless steel Titanium coating in brass appearance (ES3)
Attachment to the door
Through-fixing with rugged fastening elements guarantees the stable
attachment of the fittings and prevents them from being pried open.
Tested quality
Burglary inhibition according to DIN 18257 Suitability for fire control, smoke control and escape doors to DIN 18273 Manufacture and internal quality control according to EN ISO 9001 External quality control by the Material Testing Authority of
North Rhine-Westphalia (MPA/NRW)
71
Classification of security fittings
Features of security fittings
Extra high burglary resistance class 3 to DIN 18257 (grade 4 security to EN 1906)
Strength of backplate: 5 kN (20 kN)
Maximum flexion of backplate: 2 mm (5 mm)
Tensile strength of fastening elements: (30 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: the entire plate surface must be secured
(30 s on randomly selected point over the entire plate surface).
Tensile strength of cylinder cover: 20 kN (20kN)
Chisel test resistance: 12 (12) blows
EN 1906 values in parentheses
High burglary resistance class 2 to DIN 18257 (grade 3 security to EN 1906)
Strength of backplate: not required (15 kN)
Maximum flexion of backplate: not required (5 mm)
Tensile strength of fastening elements: (20 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: partial area around locking cylinder must be secured
(30 s on randomly selected point).
Tensile strength of cylinder cover: 17 kN (15kN)
Chisel test resistance: 6 (6) blows
EN 1906 values in parentheses
Moderate burglary resistance class 1 to DIN 18257 (grade 2 security to EN 1906)
Strength of backplate: not required (10 kN)
Maximum flexion of backplate: not required (5 mm)
Tensile strength of fastening elements: (15 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: partial area around locking cylinder must be secured
(30 s on randomly selected point).
Tensile strength of cylinder cover: 15 kN (10kN)
Chisel test resistance: 3 (3) blows
EN 1906 values in parentheses
Mild burglary resistance class 0 to DIN 18257 (grade 1 security to EN 1906)
Strength of backplate: (7 kN)
Maximum deformation of fastening: (5 mm)
Tensile strength of fastening elements: (10 kN)
Maximum deformation of fastening: (5 mm)
Drilling resistance of outside backplate: (not provided)
Tensile strength of cylinder cover: (not provided)
Chisel test resistance: (not provided)
EN 1906 values in parentheses
72
Features of contract fittings
1
2
3
4
Applications
The contract (heavy-duty) fitting range was developed for the sophisticated demands of contract work. Thanks to its modular design, it
provides for a multitude of applications.
Depending on the product variant, contract fittings are also approved for fire control, smoke control, and escape doors.
Coming with different backplate widths, they are suitable for timber and steel doors, or narrow stile doors.
Creative design options
By combining various lever and knob models, it is possible to create fitting
combinations available as entrance set or as lever set.
Contract fittings with BKS bearing technology
Attachment to the door
Through-fixing with rugged fastening elements
guarantees the stable attachment of the fittings.
Tested quality
Suitability for fire control, smoke control and escape doors to DIN 18273 Burglary inhibition according to DIN 18257 – class 3 Manufacture and internal quality control according to EN ISO 9001 External quality control by the Material Testing Authority of
North Rhine-Westphalia (MPA/NRW)
Material options
Anodized or colour coated aluminium Stainless steel Titanium coating in brass appearance (ES3)
Features and advantages:
– Compensation of latching inaccuracies
– Maintenance-free operation
– Minimised friction losses
– Fixed backplate with friction washer
– Smooth and noiseless lever operation
73
Features of contract fittings
Mounting advice for push bars
BKS locks and BKS fittings are perfectly compatible with each other; if appropriately assembled, they comply with the high requirements of
the respective standards and regulations.
Through-fixing and twofold spindle fixture – where possible – enable the fittings to resist against high operational forces which may occur
in the event of an emergency.
Especially on 2-leaf narrow stile escape doors is it essential that the fittings should be attached securely. Where through-fixing is not
possible, it is necessary that additional fastening elements such as, e.g., clinch nuts are used to provide for appropriate fitting attachment.
For safe and durable functioning of the fittings we recommend assembly according to the examples below.
Mounting advice for touch bars
74
Materials and finishes
Aluminium
Stainless steel
BKS only use high-quality aluminium alloys for their fitting programme.
A variety of finishes and colours provides for versatile creative possibilities.
The manufacture of such products is very sophisticated, minimal colour deviations are therefore possible.
Our stainless steel fittings are manufactured from material 1.4301 according to DIN 17440.
This material features excellent application properties and is increasingly used on windows and doors.
Anodised finishes Standard colours, powder-coated
Special colours, powder-coated
Golden yellow
RAL 9016
F1 natural
anodised colour
F2 champaign
colour
Finishes
Stainless steel
matt brushed
Brass
Our high-quality fittings with brass appearance are
manufactured from stainsless steel and coated with
titanium (PVD). They distinguish themselves by out-
standing corrosion and abrasion resistance and
require little maintenance only.
Finishes
Brass appearance
Stainless steel
polished
White
RAL 9016
Ruby red
RAL 3003Dark red
RAL 3007
Ultramarine
RAL 5002Sapphire blue
RAL 5003
Mint green
RAL 6029
Dark green
RAL 6012
Brown-olive
RAL 6022Dark brown
RAL 8022
Deep black
RAL 9005
Agate grey
RAL 7038
Dark bronze
UC5
Silver colour
Painted finish
75
left right
Door handing
Product advice
Door fittings should always be fixed from inside. The DIN direction must be specified for asymmetrical levers and backplate forms.
Direction of lever handle
Risk of injury
With narrow stile doors it is important to ensure that suitable
fittings are used.
Lever handles should always be cranked to prevent injuries as
the door is operated.
Boreholes
72
/92
72
/92
74
/94
74
/90
72
/92
CC =cylinder cover CH-RC =Swiss round cylinder RC =round cylinder WVPC
pointing to the left pointing to the right
DIN left
Hinges on the left – visible
DIN right
Hinges on the right – visible
76
According to the defined manufacturer's liability described in the German
"Product Liability Act", the following information regarding locks and fittings
should be observed.
Non-compliance excempts the manufacturer of his liability.
1. Product information and use as directed
A lock generally has the function to lock and block a door. Simple lock designs
serve only to shut the door. This means that a door is kept closed so that it cannot
be opened by pulling or pushing, but may be opened by a simple method, such as
by moving a lever handle. The lock latch – generally called latch – serves as lock.
Securing the closed door by blocking at least one deadbolt or latchbolt (= dead-
bolting latch) which meshes into the appropriate recess of the jamb, respectively
the latch plate, is called blocking.
The deadbolt must be blocked in extended position against being pushed back.
Moreover, door opening must be efficiently impeded unless the appropriate key
is used.
A lock must only be blocked with the door in closed position.
Cylinder attachment screws not matching with the backset dimension of the lock
must be cut to length (BKS delivers the appropriate screw length if the backset
is specified in the order).
A mortise lock is a lock which is inserted into a recess in the door leaf (lock
pocket) and fixed with screws.
The following must be observed to ensure use as directed :
– Locks, latch plates, door fittings, attaching elements and locking cylinders must
be selected to be compatible with each other.
The current state of technology must be applied for proper installation,
maintenance and possible replacement. This is documented in standards related
to these products and in the manufacturers' catalogues and instructions.
With locks for escape doors or special locks, the simultaneous operation of key
and fitting, e.g., a lever handle, is usually not allowed.
Locks for escape doors or special locks may only be combined with locking cylin-
ders with turn knob, if this is agreed with the lock manufacturer by contract. For
it is generally assumed that only the owners of the keys have the right to operate
the lock, and the activation of a lock through a knob cylinder (i.e. without key) is
not considered to be a normal case.
Latch and deadbolt being returned simultaneously by the mere operation of the
lever handle is a special case which must not generally replace the standard key
operation for withdrawing the deadbolt.
Locking cylinders may only be installed in locks without any reservation if they
comply with a dimensional standard (e.g. DIN 18252), and if the locks in turn are
explicitly designed for cylinders to this standard.
In all other cases, the manufacturer, dealer, fabricator or consumer of such locks
has to ensure that the locking cylinders he has selected are suitable for the
intended use.
It is necessary that legal regulations and manufacturer's instructions should be
observed. For example, no locking cylinders with knob, turn or similar handle may
be installed in panic locks.
General terms, unless explained on catalogue pages, in brochures, price lists or
on the internet are defined in the standards relevant for these products (such as
EN 179, EN 1125, EN 1303, EN 1906, EN 12209). Deviations from the particular
relevant standard must be specified in the order.
2. Incorrect use
Incorrect use – meaning not used as specified – of locks is when, e.g.,
– the flawless use is prevented by inserting foreign objects into the lock or into
the latch plate.
– the lock or the latch plate are attacked in such a way on the outside or inside
that their construction or function are affected.
– the deadbolt is extended to prevent the door from closing
– the function of the locking elements is blocked as a result of improper assembly
or subsequent treatment, e.g., painting.
– a load is put on the lever handle exceeding the normal force applied by hand.
– unsuitable, such as dimensionally deviating, or the wrong keys are used
– the specified door gap changes as a result of hinge re-adjustments or uninten-
ded lowering of the door.
– a double door is opened by the passive leaf although not designed and approved
for this feature.
– objects or extremities are put between the door leaf and the jamb as the door
closes.
– activating the lever and the key simultaneously.
3. Product performance
Unless described in our catalogues, brochures or performance specifications,
technical requirements must be agreed with us.
The relevant standards serve as guidelines (for example, EN 179, EN 1125, EN
1303, EN 1906, EN 12209).
Basic requirements and additional requirements are defined in these standards.
The serviceability of locks also depends on the operating frequency, operating
method, environmental effects and maintenance.
Lock, latch plate, door fittings, locking cylinder and keys must be replaced as
soon as problems occur despite proper maintenance.
This also applies to attempts to forcefully overcome locks and their accessories
(burglary attempts).
4. Product maintenance
Locks must be lubricated with suitable lubricants at least once a year or more
frequently depending on the wear. Door fittings, latch plate and locking cylinder
must be checked for their proper condition and tight attachment. Only cleaning
agents not containing corrosive ingredients may be used.
5. Information and instruction duties
In order to comply with the informational and instructional duties prescribed by
the German Product Liability Act, the following documents and services are made
available to specialist dealers, locksmiths, architects, planners, fabricators and
end users upon request :
– catalogues, brochures
– specification clauses, quotation documents, key combination records
– the relevant standards serving as guidelines, for example, EN 179, EN 1125,
EN 1303, EN 1906, EN 12209.
– Instructions for installation, operation and maintenance
For the selection, installation, operation, and maintenance of locks and fittings,
– architects and planners should consider to request and observe all required
product information from us.
– specialist dealers must consider to observe product information and reference
in the price lists and specifically request all necessary instructions from us and
to forward these to the fabricators.
– fabricators must consider to observe all product information and specifically
request operating and maintenance instructions from us and to forward these
to contractors and consumers.
Product information regarding fittings
77
Product information regarding locks and fittings
Important advice regarding
the use of BKS locks and fittings :
1. Do not make drillings on the door leaf with the lock
installed.
2. Do not hit the square through the follower by force.
5. Do not paint over deadbolt and latch.4. The distance between the lock forend and the latch
plate should range between 2 and 5 mm.
3. Do not carry the door leaf by the handle.
78
Product information regarding locks and fittings
8. The deadbolt must not be thrown with the door
open.
9. Do not operate handle and key at the same time.
gleichzeitig betätigt werden.
10. Emergency exit devices must not be left with the
key inserted.
11. Panic or emergency exit devices must not be fitted with
cylinders having a knob or a turn.
Exception: self-locking locks of series 19xx and 21xx.
Attention: Push bars might interfere with the knob or turn!
6. The handle must be loaded in rotational direction only.
The maximum force allowed is 150 N.
7. Do not manipulate the lock with foreign objects.
Operate it with the appropriate key only
79
Product information regarding locks and fittings
Exclusion of liability
BKS products are permanently adapted and developed to meet the growing demands of the market. We also reserve
the right to make changes serving to advance the state of the art.
Further reasons for modification may be:
– global technical development
– alterations in the product range
– adaptation to changed laws and technical standards
The present catalogue was compiled with the greatest possible care. Nevertheless, we ask for your understanding
that we take no responsibility for possible mistakes with regard to presentation and description of the products.
Thank you.
12. Exit devices not corresponding to EN 179 or EN 1125 are
not suitable for frequent use and should only be operated
in the event of an emergency.
13. Double leaf doors without double-sided panic function
(full panic function) may not be forced open by the
passive leaf.
14. If there is any evidence of violence, the lock must be
replaced immediately.
15. Lubricate locks with non-resinous oil at least once a year.
1 x year
80
Relevant standards
DIN 107
Definition of DIN left and DIN right in the building and construction
industry
DIN 1080, Part 1
Terms, symbols and units in civil engineering, basics
DIN 4102, parts 5 + 18
Part 5: Fire performance of building materials and building components;
fire-resistant closures, closures in elevator shaft walls fire-
resistant glazing
Part 18: Fire behaviour of building materials and components; fire
protection closures; attestation of the quality 'self-locking'
(continuous operation test)
DIN 18055
Windows; joint impermeability, resistance to driving rain and to
mechanical stress; specifications and tests
DIN 18082, Parts 1 + 3
Part 1: Fire-resistant closures, steel doors T30-1, type A
Part 3: Fire-resistant closures, steel doors T30-1, Type B
DIN 18095, parts 1 + 2
Part 1: Doors; smoke control doors; terms and requirements
Part 2: Doors; smoke control doors; type testing for durability
and tightness
DIN 18100
Doors; wall openings for doors; dimensions to DIN 4172
DIN 18101
Doors; doors for residential construction; door leaf dimensions, position
of lock and hinges; interrelationship between dimensions
DIN 18111, part 1
Door frames, steel frames, standard frames for rebated doors
DIN 18250
Mortise locks for fire-resistant closures
DIN 18251
Locks; Mortise locks for doors
DIN 18252
Locking cylinders for door locks; terms, descriptions
DIN 18255
Building hardware; lever handles, backplates and rosettes – terms,
dimensions, requirements
DIN 18257
Building hardware; security fittings – terms, dimensions, requirements,
tests and markings
DIN 18273
Building hardware; lever handle sets for fire control doors and smoke
control doors – terms, dimensions, requirements and tests
DIN 18357
VOB (German Construction Contract Procedures), part C: General technical
contractual requirements, building hardware
DIN 18361
VOB (German Construction Contract Procedures), part C: General technical
contractual requirements, glazing
DIN 68706, part 1
Interior doors of timber and timber materials, plywood doors, terms,
perferential dimensions, structural features
EN 179
Building hardware. Emergency exit devices operated by a lever handle
or push pad, for use on escape routes
EN 1125
Building hardware. Panic exit devices operated by a horizontal bar,
for use on escape routes
EN 1154
Building hardware. Controlled door closing devices
EN 1303
Building hardware. Cylinders for locks. Requirements and test methods
ENV 1627
Windows, doors, shutters. Burglar resistance. Requirements and classi-
fication
ENV 1628
Windows, doors, shutters. Burglar resistance. Test method for the
determination of resistance under static loading
ENV 1629
Windows, doors, shutters. Burglar resistance. Test method for determina-
tion of resistance under dynamic loading
ENV 1630
Windows, doors, shutters. Burglar resistance. Test method for the
determination of resistance to manual burglary attempts
EN 1634, parts 1 + 3
Fire resistance tests for door and shutter assemblies
Part 1: Fire control doors and shutters
Part 3: Smoke control doors and shutters
EN 1906
Building hardware. Lever handles and knob furniture. Requirements and
test methods
The most important (European) standards concerning doors and door-related products are:
81
Quality
The constant high quality of all operational sequences at BKS is guaranteed by the application of a Quality Assurance System
to EN ISO 9001.
This is the highest quality standard in Europe, not only for production but also for other company divisions such as development, order
processing or after-sales service etc.
BKS applies this standard to all product areas (locking cylinders, door locks, fittings, electronics and door closers).
The extensive G.U-BKS range is designed to bear high stress loads and oriented towards compatibility among its products.
A high level of quality, reliability and durability of door units can only be guaranteed with a system of compatible products which G.U-BKS
is capable to offer thanks to the unequalled diversity of the Group's product range.
Product quality and compliance with various standards and regulations are documented in test results and approvals,
copies of which are available on request.
82
70 – 71
54 – 55
58 – 59
50 – 51
30 – 31
36 – 37
75
58
48 – 49
62 – 69
60
74
70 – 71
72
42 – 43
24 – 25
16 – 19
12 – 15
44 – 45
26 – 29
46 – 47
20 – 23
8 – 11
73
80
50 – 51
76 – 79
81
61
32 – 35
58 – 60
52 – 53
75
59
........................................................................................................................................................
.................................................................................................................................................................................................
..............................................................................................................................................................................................
...................................................................................................................................................................................
.............................................................................................................................................................................................
............................................................................................................................................................................................................
.....................................................................................................................................................................................
.............................................................................................................................................................................................................
..........................................................................................................................................................................
.....................................................................................................................................................
.............................................................................................................................................................
........................................................................................................................................................................................
................................................................................................................................................................................
................................................................................................................................................................................
.......................................................................................................................................................................................
.......................................................................................................................................................................................
......................................................................................................................................................................................
............................................................................................................................................................................
...................................................................................................................................................................................
........................................................................................................................................................................................
............................................................................................................................................................................................
...........................................................................................................................................................................................
...........................................................................................................................................................................................
................................................................................................................................................................................
...........................................................................................................................................................................................................
.........................................................................................................................................................................................................
....................................................................................................................................................................
....................................................................................................................................................................................................
...............................................................................................................................................................................................................
...........................................................................................................................................................................................................
.............................................................................................................................................................................................................
.........................................................................................................................................................................................................
......................................................................................................................................................................................................
..............................................................................................................................................................................................
Security fittings, features and requirements
Architects range
Fixing accessories
Floor-mounted door stops
Wide backplate set
Touch bar
Direction of lever handle
Spindles
Stainless steel window handles
Panic and emergency exit devices for Europe
Divided spindles for escape door fittings
Materials and finishes
Features of security fittings
Features of contract fittings
Lever model ANDANTE
Lever model BAUHAUS
Lever model BELCANTO
Lever model BELCANTO-Panic
Lever model CRESCENDO
Lever model EMMAUS
Lever model FORTE
Lever model OFFICE
Lever model RONDO
Mounting advice for fittings
Standards
Pictograms
Product information/product liability
Quality control
Screws
Push bars
Spindles
Door holder
Door handing
Threaded spindles
WP02014-04-2-1 12/2009 Printed in Germany
Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 3D-71254 DitzingenPhone + 49 (0) 71 56 3 01-0Fax + 49 (0) 71 56 3 01-2 93
BKS GmbHHeidestr. 71D-42549 VelbertPhone + 49 (0) 20 51 2 01-0Fax + 49 (0) 20 51 2 01-4 31
www.g-u.com
New locking functions for glass doors BKS lock technology goes glass
Locks and Fittings for Toughened Glass Assemblies
Lock series PRIME OFFICE
3
Standard variants in heavy duty qualityPRIME OFFICE 0515 · Pages 6 – 8
BKS locking skills applied on glassGlass door lock series PRIME OFFICE · Pages 4 – 5
Contents
Strike boxes for single and double action swing doorsPage 12
Door fi ttingsPage 13
Self-locking panic locks for escape doors to EN 179PRIME OFFICE Series 21 · Pages 9 – 11
Technical detailsLock dimensions, glass preparation and cutting dimensions · Pages 14 – 15
Glass Door Locks PRIME OFFICE
Contents
4
Glass Door Locks
Series PRIME OFFICE – BKS locking skills applied on glass
New functionalities on glass doors –
with PRIME OFFICE glass door locks
Banks and insurance offices
Office and administrative buildings
Glass as building material has gained in importance not only for windows and façades but also for in-terior architecture. The trend for glass, especially in building interiors, is supported by enhanced product functionalities and versatile design options.
With the lock series PRIME OFFICE, the group of com-panies Gretsch-Unitas have developed a product line exclusively for this building material.
Lock variant Application example
PRIME OFFICE 0515-PZ, for profi le cylinder
PRIME OFFICE 0515-BB, warded
PRIME OFFICE 0515-Bad/WC, bathroom
Standard application depending on lock insert.
PRIME OFFICE 2110
– Panic function B (shift function)
– Self-locking latchbolt lock
All-glass door assemblies, e.g., entrance to an offi ce
or surgery. The outside handle can be engaged and
disengaged (function B).
PRIME OFFICE 2112
– Panic function C
(forced locking function)
– Self-locking latchbolt lock
All-glass door integrated in a sliding partition system,
e.g. entrance to an EDP room. The door can be opened
by key. By turning the key to the limit in opening direc-
tion, the follower is coupled and the door can be opened
by handle. Upon removing the key, the outside handle is
switched to idling again (function C).
PRIME OFFICE 2116
– Panic function E (latch lever function)
– Self-locking latchbolt lock
All-glass door with fi xed knob on the outside; opening
from outside by key (function E).
Performance features
Tried and trusted BKS mortise lock technology
Consistency within the lock range in terms of technical
design and style
Standard applications including warded key and bath-
room variants
Self-locking glass door panic locks offering various
functional features
Combination with mechatronic locking systems
Multifunctional doors realised in glass
Finish: stainless steel
Compatible among each other functionally and vi-sually, the locks of the PRIME OFFICE range allow for sophisticated applications on glass doors. With the tried and tested BKS lock technology having been brought onto glass, there are completely new options for the use of toughened glass doors and door assemblies which have not been thought pos-sible before.
Opening the door in escape direction is possible at any time.
5
1
23
4
Airports, railway stations
Hotels Hospitals, care homes
Nurseries, schools,universities
Shopping centres Stadiums,sporting facilities
Things to be considered when ordering
1 Lock variants
PRIME OFFICE 0515
PRIME OFFICE Series 21
Page
6 – 11
2 Strike boxes
PRIME OFFICE
Page
12
3 Door fi ttings
RONDO
BELCANTO / BELCANTO-Panik
Page
13
4 Profi le cylinders
Profi le cylinder lengths
Page
14
6
PRIME OFFICE 0515 – Single action swing doors
Standard variants in heavy duty quality
PRIME OFFICE 0515 DIN lh DIN rh
Cylinder lock
prepared for profi le cylinder*K-17818-43-L-8H K-17818-43-R-8H
Cylinder lock
prepared for profi le cylinder*
with profi le cylinder rosette
K-17818-45-L-8H K-17818-45-R-8H
Warded lock K-17818-42-L-8H K-17818-42-R-8H
Bathroom lock
with rosetteK-17818-46-L-8H K-17818-46-R-8H
Cylinder lock
prepared for
Swiss round cylinder*
with round cylinder rosette
K-17818-47-L-8H K-17818-47-R-8H
Variants / Order numbers
* Appropriate profi le cylinders can be found in our “Locking cylinders performance catalogue” and in the brochure “Round cylinder series 45 janus”.
7
PRIME OFFICE 0515 DIN lh DIN rh
Deadbolt lock
prepared for profi le cylinder*K-17818-03-L-8H K-17818-03-R-8H
Deadbolt lock
prepared for profi le cylinder*
with profi le cylinder rosette
K-17818-05-L-8H K-17818-05-R-8H
Deadbolt lock
prepared for
Swiss round cylinder*
with round cylinder rosette
K-17818-07-L-8H K-17818-07-R-8H
Latch lock K-17818-51-L-8H K-17818-51-R-8H
PRIME OFFICE 0515 – Single action swing doors
Standard variants in heavy duty quality
Variants / Order numbers
* Appropriate profi le cylinders can be found in our “Locking cylinders performance catalogue” and in the brochure “Round cylinder series 45 janus”.
8
PRIME OFFICE 0515 – Single or double action swing doors
Standard variants in heavy duty quality
PRIME OFFICE 0515 DIN lh DIN rh
Deadbolt lock
prepared for profi le cylinder*K-17818-33-L-8H K-17818-33-R-8H
Deadbolt lock
prepared for profi le cylinder*
with profi le cylinder rosette
K-17818-35-L-8H K-17818-35-R-8H
Deadbolt lock
prepared for
Swiss round cylinder*
with round cylinder rosette
K-17818-37-L-8H K-17818-37-R-8H
Specifi cation clause
BKS PRIME OFFICE heavy duty lock for frequently used project doors,
tested to EN 12209; heavy duty quality according to DIN 18251 –
grade 3; deadbolt made from zinc diecast; steel-reinforced slide
bearing with synthetic, silenced 8 mm follower.
Exterior dimensions:
105 mm x 185 mm x 38 mm (W x H x D),
cover with rounded corners
Glass thickness:
Locks suited for 8/10/12 mm thick toughened safety glass and rebate
depths of 24/26/28 mm, respectively.
Socket for lever handle:
For handles with rosette, fi xing pin centres 38 mm.
Variants / Order numbers
* Appropriate profi le cylinders can be found in our “Locking cylinders performance catalogue” and in the brochure “Round cylinder series 45 janus”.
9
PRIME OFFICE Series 21 – Single action swing doors
Self-locking panic locks 2110 for escape doors to EN 179
Shift function B
PRIME OFFICE 2110 DIN lh DIN rh
Cylinder lock
prepared for profi le cylinder*K-17819-53-L-8H K-17819-53-R-8H
Cylinder lock
prepared for profi le cylinder*
with profi le cylinder rosette
K-17819-55-L-8H K-17819-55-R-8H
Cylinder lock
prepared for
Swiss round cylinder*
with round cylinder rosette
K-17819-57-L-8H K-17819-57-R-8H
Variants / Order numbers
Specifi cation clause
Self-locking panic lock from series 21 for frequently used project
doors; tested to EN 12209; approved to EN 179 (emergency exit de-
vices) – grade 4; prepared for lever handles with rosette, follower
9 mm; with automatic latchbolt and integral trigger lever (self-locking
feature), latchbolt ejection 18.5 mm in locked position.
Exterior dimensions:
105 mm x 185 mm x 38 mm (W x H x D),
cover with rounded corners
Glass thickness:
Locks suited for 8/10/12 mm thick toughened safety glass and rebate
depths of 24/26/28 mm, respectively.
Socket for lever handle:
For handles with rosette, fi xing pin centres 38 mm.
Functional description
Shift function B
Actuation from inside
Opening the door in escape direction is possible at any time.
Normal position: outside handle engaged
Passage possible from both sides by operating the handle.
Shift position: outside handle disengaged
Outside handle idling due to follower being uncoupled. Door can only
be opened by operating the key to engage the handle (normal posi-
tion). Afterwards the follower can be put to idling again (shift position)
by key.
* Appropriate profi le cylinders can be found in our “Locking cylinders performance catalogue” and in the brochure “Round cylinder series 45 janus”.
10
PRIME OFFICE Series 21 – Single action swing doors
Self-locking panic locks 2112 for escape doors to EN 179
Forced locking function C
PRIME OFFICE 2112 DIN lh DIN rh
Cylinder lock
prepared for profi le cylinder*K-17820-53-L-8H K-17820-53-R-8H
Cylinder lock
prepared for profi le cylinder*
with profi le cylinder rosette
K-17820-55-L-8H K-17820-55-R-8H
Cylinder lock
prepared for
Swiss round cylinder*
with round cylinder rosette
K-17820-57-L-8H K-17820-57-R-8H
Variants / Order numbers
Specifi cation clause
Self-locking panic lock from series 21 for frequently used project
doors; tested to EN 12209; approved to EN 179 (emergency exit de-
vices) – grade 4; prepared for lever handles with rosette, follower
9 mm; with automatic latchbolt and integral trigger lever (self-locking
feature), latchbolt ejection 18.5 mm in locked position.
Exterior dimensions:
105 mm x 185 mm x 38 mm (W x H x D),
cover with rounded corners
Glass thickness:
Locks suited for 8/10/12 mm thick toughened safety glass and rebate
depths of 24/26/28 mm, respectively.
Socket for lever handle:
For handles with rosette, fi xing pin centres 38 mm.
Functional description
Forced locking function C
Actuation from inside
Opening the door in escape direction is possible at any time.
Actuation from outside
Outside handle idling due to follower being uncoupled. The door can
only be opened by holding the key in end stop position. Upon remo-
ving the key, the outside handle is switched to idling again.
* Appropriate profi le cylinders can be found in our “Locking cylinders performance catalogue” and in the brochure “Round cylinder series 45 janus”.
11
PRIME OFFICE Series 21 – Single action swing doors
Self-locking panic locks 2116 for escape doors to EN 179
Latch lever function E
PRIME OFFICE 2116 DIN lh DIN rh
Cylinder lock
prepared for profi le cylinder*K-17821-53-L-8H K-17821-53-R-8H
Cylinder lock
prepared for profi le cylinder*
with profi le cylinder rosette
K-17821-55-L-8H K-17821-55-R-8H
Cylinder lock
prepared for
Swiss round cylinder*
with round cylinder rosette
K-17821-57-L-8H K-17821-57-R-8H
Variants / Order numbers
Specifi cation clause
Self-locking panic lock from series 21 for frequently used project
doors; tested to EN 12209; approved to EN 179 (emergency exit de-
vices) – grade 4; prepared for lever handles with rosette, follower
9 mm; with automatic latchbolt and integral trigger lever (self-locking
feature), latchbolt ejection 18.5 mm in locked position.
Exterior dimensions:
105 mm x 185 mm x 38 mm (W x H x D),
cover with rounded corners
Glass thickness:
Locks suited for 8/10/12 mm thick toughened safety glass and rebate
depths of 24/26/28 mm, respectively.
Socket for lever handle:
For handles with rosette, fi xing pin centres 38 mm.
Functional description
Latch lever function E
Actuation from inside
Opening the door in escape direction is possible at any time.
Actuation from outside
Fixed knob; the door is opened by key (the automatic latchbolt is re-
tracted through the actuated latch lever).
* Appropriate profi le cylinders can be found in our “Locking cylinders performance catalogue” and in the brochure “Round cylinder series 45 janus”.
12
PRIME OFFICE 0515 / Series 21
Strike boxes for single and double action swing doors
Strike boxes for single action swing doors DIN lh * DIN rh **
Strike box
for latch locks / deadbolt locks
PRIME OFFICE 0515
K-17822-71-L-8H K-17822-71-R-8H
Strike box
for latch locks
PRIME OFFICE 0515 /
PRIME OFFICE Series 21
K-17822-81-L-8H K-17822-81-R-8H
Strike box
for deadbolt locks
PRIME OFFICE 0515
K-17822-91-L-8H K-17822-91-R-8H
Strike box for double action swing doors DIN lh * DIN rh **
Strike box
for deadbolt locks
PRIME OFFICE 0515
K-17822-61-L-8H K-17822-61-R-8H
Variants / Order numbers
Specifi cation clause
Strike box for PRIME OFFICE 0515 and PRIIME OFFICE Series 21, for
single and double action swing doors.
Exterior dimensions:
105 mm x 185 mm x 38 mm (W x H x D),
cover with rounded corners
Glass thickness:
Strike boxes suited for 8/10/12 mm thick toughened safety glass.
* DIN rh lock on active leaf requires DIN lh strike box.** DIN lh lock on active leaf requires DIN rh strike box.
13
PRIME OFFICE 0515 / Series 21
Door fittings
Variants / Order numbers
PRIME OFFICE 0515 Lever model Type of set Spindle Order number
RONDO Lever set 8 mm B 7050 6141
RONDO Entrance set 8 mm B 7073 6141
BELCANTO Lever set 8 mm B 7060 6141
BELCANTO Entrance set 8 mm B 7081 6141
Variants / Order numbers
PRIME OFFICE Series 21 Lever model Type of set Spindle Order number
RONDO Lever set 9 mm B 7053 6141
RONDO Entrance set 9 mm B 7076 6141
BELCANTO-Panik Lever set 9 mm B 70BI 6141
BELCANTO-Panik Entrance set 9 mm B 70BL 6141
Specifi cation clause
G.U-BKS fi ttings for PRIME OFFICE 0515.
Heavy duty stainless steel fi ttings, rosette with 38 mm fi xing pin cen-
tres; with 8 mm square spindle and fi xings; fi xed rosette with friction
washer (BKS differential bearing).
Specifi cation clause
G.U-BKS fi ttings for PRIME OFFICE Series 21.
Heavy duty stainless steel fi ttings, rosette with 38 mm fi xing pin cen-
tres; with 9 mm square spindle and fi xings; fi xed rosette with friction
washer (BKS differential bearing).
14
PRIME OFFICE 0515 / Series 21
Technical details
185
80
1040 t
o bo
ttom
edg
e of
gla
ssD
BE
C
F
15
3.557
DB
E
90
C
A
G
Lock105
Strike box105
90 120
15
4
5757
214
A
PRIME OFFICE without profi le cylinder rosette
Glass
thickness
A [mm]
Lock
thickness
B [mm]
Minimum
recommended
cylinder length
C (HS+OHS)*
[mm]
Protrusion of cylinder Position
of latchbolt
F [mm]
Rebate
depth
G [mm]
Hinge side
D [mm]
Opposite
hinge side
E [mm]
8 38 54 (27+27) 13 3 21 24
10 40 54 (27+27) 13 1 23 26
12 42 58 (27+31) 13 3 25 28
PRIME OFFICE with profi le cylinder rosette
Glass
thickness
A [mm]
Lock
thickness
B [mm]
Minimum
recommended
cylinder length
C (HS+OHS)*
[mm]
Protrusion of cylinder Position
of latchbolt
F [mm]
Rebate
depth
G [mm]
Hinge side
D [mm]
Opposite
hinge side
E [mm]
8 38 62 (31+31) 0,5 0,5 21 24
10 40 66 (31+35) 0,5 2,5 23 26
12 42 66 (31+35) 0,5 0,5 25 28
Dimensions and cylinder lengths depending on glass thickness
* HS = Hinge side, OHS = Opposite hinge side
View and horizontal sections
15
R60
49
14
1.5
Countersunk screw
M4x6
Countersunk
screw
M4x6
Cover
(lock side)
Countersunk
screw
M6x30
Fixing plate
(lock side)
Glass door lock
Gasket
(lock side)
Adhesive film
Clamping plate
(opposite to lock side)
with gasket and glass
protector
Cover
(opposite to lock side)
PRIME OFFICE 0515 / Series 21
Technical details
Glass preparation details
57
80
ø 50
ø 50
1040 t
o bo
ttom
edg
e of
gla
ss
Mounting the lock to the glass pane
Strike plate designto EN 179 (recess for latch)
All undimensioned radii R = 1.5 mmStrike plate thickness t = min. 1.5 mm
WP00332-04-2-2 05/2010 Printed in Germanywww.g-u.com
BKS GmbHHeidestr. 71D-42549 VelbertPhone + 49 (0) 2051 2 01-0Fax + 49 (0) 2051 2 01-4 31
Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 3D-71254 DitzingenPhone + 49 (0) 7156 3 01-0Fax + 49 (0) 7156 3 01-2 93
Fittings for toughened glass assemblies
Order Catalogue
WP00452-04-3-1 08/2007 Printed in Germany
Fitt
ing
s fo
r to
ug
hen
ed g
lass
ass
emb
lies
Ed
itio
n 0
8.2
00
7
Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 3D-71254 DitzingenTel. + 49 (0) 71 56 3 01-0Fax + 49 (0) 71 56 3 01-2 93www.g-u.com
Edition 08.2007
Patch fi ttings for glass doors
Locks and strike boxes Accessories for all glass systems
Sliding wall systems Swing door drives Automatic sliding door systems
Curved sliding doors / Revolving doors
Door closers
3
Glass Door Fittings
Contents
1 Patch fittings for glass doors Page
Fittings for double-action swing doors 8
Overpanel fittings 9 – 15
Connectors 16 – 20
Glass preparation details 21 – 26
2 Locks and strike boxes Page
Centre locks 28 – 29
Corner locks 30
Glass preparation details 31
3 Accessories for all glass systems Page
Floor bearing, pivots, lock keeper plate, 34 – 37 floor sockets, fixing plate
4 Door closers Page
Overhead door closers 40 – 44
Floor springs 45 – 46
5 Sliding wall systems Page
All glass system shopMaster GSW-M 48 – 49
All glass system shopMaster GSW-A 50 – 51
6 Swing door drives Page
Swing door drive turnMaster 54 – 55
Underfloor drive swingMaster DTU 56 – 57
7 Automatic sliding door systems Page
Sliding door compactMaster CM and CM-F 60 – 61
Sliding door econoMaster EM 62 – 63
Telescopic sliding door compactMaster CMT and CMT-F 64 – 65
8 Curved sliding doors / Revolving doors Page
Curved sliding door compactMaster CMR and CMR-F 68 – 69
Standard revolving door GRA 70 – 71
All glass revolving door GGG 72 – 73
Large-capacity revolving door GGR / GGV 74 – 75
Security revolving door / Security curved sliding door GSI 76 – 77
4
Glass Door Fittings
Complete programmefor 10 or 12 mm glass thickness
FinishesThe fittings are available in various finishes :
Stainless steel matt
Stainless steel polished
Brass colour
Quality / Quality controlOur glass fittings are high-grade products. Their quality is constantly tested and controlled.
Glass preparationAny preparational work has to be carried out before the glass is tempered. Subsequent glass preparation on toughened safety glass is not possible.
The glass preparation details shown in the dimensioned drawings of this catalogue correspond to international standards.
Load capacityG.U-BKS fittings for glass doors and all glass systems are solidly processed and ideally suitable for high loads.
They are designed for a maximum door leaf weight of 100 kg and a width of 1100 mm.
Glass thicknessThe fittings are suitable for 10 mm or 12 mm toughened glass.
Product rangeApart from fittings for all glass systems, the door technology division of G.U-BKS offers a wide range of products including door automa-tion systems. All products of the programme are well coordinated among each other, thus providing solutions for any technical and appearance requirements.
Practical advice All patch fittings are lh/rh usable.
For reasons of burglary prevention, patch fittings should always be fixed from inside.
5
Glass Door Fittings
Complete programmefor 10 or 12 mm glass thickness
The G.U-BKS glass fitting range allows for versatile creative solutions.
On the following catalogue pages you can make your individual choice of fittings.
With each fitting type an overview of possible hardware combinati-ons is given as well as a cross reference to the corresponding glass preparation details.
6
7
Patch Fittings for Glass Doors
Thanks to G.U-BKS supplying all hardware components from one source, optimum compatibility and functionality are guaranteed.
Likewise, an appearance match of components is always ensured, be it in stainless steel finish – matt or polished – or in brass colour.
8
Patch Fittings for Glass Doors
Fittings for double-action swing doors – GB 10, GB 20for 10 or 12 mm glass thickness
Bottom patch GB 10 Applicable with : Floor spring and floor bearing 6115
Glass preparation details page 21
Top patch GB 20 Applicable with : Overpanel patches GB 30, GB 40, GB 41, GB 51
Top pivots 6118/9, 6124, 6129
Glass preparation details page 21
Description Finish PU Order no.
Bottom patch GB 10incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00100-00-0-8HV-00100-00-0-8IV-00100-00-0-3R
Top patch GB 20incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00101-00-0-8HV-00101-00-0-8IV-00101-00-0-3R
Gasket for 12 mm glass thickness(GB 10, GB 20, GB 30, GB 30/K)
1 pc. K-17419-12-0-0
Order references
9
Patch Fittings for Glass Doors
Fittings for overpanels – GB 30, GB 30/Kfor 10 or 12 mm glass thickness
Overpanel patch GB 30
with 15 mm pivot, prepared for wall fixing with threaded pin 6130 or fixing plate 6140 (see accessories)
Applicable with : Top patch GB 20
Glass preparation details page 21
Single overpanel strike box GB 30/K
prepared for wall fixing with threaded pin 6130 or fixing plate 6140 (see accessories)
Applicable with : Corner lock GS 50S
Glass preparation details page 21
Description Finish PU Order no.
Overpanel patch GB 30incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00103-00-0-8HV-00103-00-0-8IV-00103-00-0-3R
Single overpanel strike box GB 30/Kincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00104-00-0-8HV-00104-00-0-8IV-00104-00-0-3R
Gasket for 12 mm glass thickness(GB 10, GB 20, GB 30, GB 30/K)
1 pc. K-17419-12-0-0
Order references
10
Patch Fittings for Glass Doors
Fittings for overpanels – GB 40, GB 40/Kfor 10 or 12 mm glass thickness
Patch for overpanels and sidelight GB 40
with 15 mm pivot
Applicable with : Top patch GB 20
Glass preparation details page 21
Corner overpanel strike box GB 40/K Applicable with : Corner lock GS 50S
Glass preparation details page 21
Description Finish PU Order no.
Patch for overpanels and sidelight GB 40incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00105-00-0-8HV-00105-00-0-8IV-00105-00-0-3R
Corner overpanel strike box GB 40/Kincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00106-00-0-8HV-00106-00-0-8IV-00106-00-0-3R
Gasket for 12 mm glass thickness(GB 40, GB 40/K)
1 pc. K-17420-12-0-0
Order references
11
Patch Fittings for Glass Doors
Fittings for overpanels – GB 41for 10 or 12 mm glass thickness
Patch for overpanel and sidelights GB 41with fin fitting DIN left hand
with 15 mm pivot
Applicable with : Top patch GB 20
Patch for overpanel and sidelights GB 41with fin fitting DIN right hand
with 15 mm pivot
Applicable with : Top patch GB 20
Glass preparation details page 22
Glass preparation details page 22
Reinforcing glass panels for toughened glass assemblies and partition walls:
We recommend to use reinforcement glass panes for assemblies with overpanels exceeding the dimension of :
Empirical formula = W + H > 1400 mm
Recommended glass thickness = 12 mm
In order to ensure the safe and permanent operation of your glass assembly, we recommend that you consult your hardware/glass supplier already at the planning stage.
Reinforcing glass panels for toughened glass assemblies and partition walls:
We recommend to use reinforcement glass panes for assemblies with overpanels exceeding the dimension of :
Empirical formula = W + H > 1400 mm
Recommended glass thickness = 12 mm
In order to ensure the safe and permanent operation of your glass assembly, we recommend that you consult your hardware/glass supplier already at the planning stage.
12
Attention: Exterior view !
Description Finish PU Order no.
Patch for overpanel and sidelights GB 41, DIN lhincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00107-00-L-8HV-00107-00-L-8IV-00107-00-L-3R
Patch for overpanel and sidelights GB 41, DIN rhincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00107-00-R-8HV-00107-00-R-8IV-00107-00-R-3R
Gasket for 12 mm glass thickness(GB 41, GB 41/K)
1 pc. K-17421-12-0-0
Order references
Patch Fittings for Glass Doors
Fittings for overpanels – GB 41for 10 or 12 mm glass thickness
13
Patch Fittings for Glass Doors
Fittings for overpanels – GB 41/Kfor 10 or 12 mm glass thickness
Corner overpanel strike box GB 41/Kwith fin fitting DIN left hand
Applicable with : Corner lock GS 50S
Corner overpanel strike box GB 41/Kwith fin fitting DIN right hand
Applicable with : Corner lock GS 50S
Glass preparation details page 22
Glass preparation details page 22
Reinforcing glass panels for toughened glass assemblies and partition walls:
We recommend to use reinforcement glass panes for assemblies with overpanels exceeding the dimension of :
Empirical formula = W + H > 1400 mm
Recommended glass thickness = 12 mm
In order to ensure the safe and permanent operation of your glass assembly, we recommend that you consult your hardware/glass supplier already at the planning stage.
Reinforcing glass panels for toughened glass assemblies and partition walls:
We recommend to use reinforcement glass panes for assemblies with overpanels exceeding the dimension of :
Empirical formula = W + H > 1400 mm
Recommended glass thickness = 12 mm
In order to ensure the safe and permanent operation of your glass assembly, we recommend that you consult your hardware/glass supplier already at the planning stage.
14
Attention: Exterior view !
Description Finish PU Order no.
Corner overpanel strike boxGB 41/K, DIN lhincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00108-00-L-8HV-00108-00-L-8IV-00108-00-L-3R
Corner overpanel strike box GB 41/K, DIN rhincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00108-00-R-8HV-00108-00-R-8IV-00108-00-R-3R
Gasket for 12 mm glass thickness(GB 41, GB 41/K)
1 pc. K-17421-12-0-0
Order references
Patch Fittings for Glass Doors
Fittings for overpanels – GB 41/Kfor 10 or 12 mm glass thickness
15
Patch Fittings for Glass Doors
Fittings for overpanels – GB 51for 10 or 12 mm glass thickness
Double overpanel patch GB 51with fin fitting
with 15 mm pivot
Description Finish PU Order no.
Double overpanel patch GB 51incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00109-00-0-8HV-00109-00-0-8IV-00109-00-0-3R
Gasket for 12 mm glass thickness(GB 51)
1 pc. K-17422-12-0-0
Order references
Glass preparation details page 23Applicable with: Top patch GB 20
Reinforcing glass panels for toughened glass assemblies and partition walls:
We recommend to use reinforcement glass panes for assemblies with overpanels exceeding the dimension of :
Empirical formula = W + H > 1400 mm
Recommended glass thickness = 12 mm
In order to ensure the safe and permanent operation of your glass assembly, we recommend that you consult your hardware/glass supplier already at the planning stage.
16
Patch Fittings for Glass Doors
Connectors for single and double-action swing doors – GB 60for 10 or 12 mm glass thickness
Connector for overpanels and sidelight GB 60
including PVC stop for single-action doors
Glass preparation details page 24
Description Finish PU Order no.
Connector for overpanels and sidelight GB 60incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00110-00-0-8HV-00110-00-0-8IV-00110-00-0-3R
Gasket for 12 mm glass thickness (GB 60)
1 pc. K-17423-12-0-0
Order references
17
Patch Fittings for Glass Doors
Connectors – GB 70for 10 or 12 mm glass thickness
Overpanel connector GB 70
including PVC stop for single-action doors
Glass preparation details page 25
Description Finish PU Order no.
Overpanel connector GB 70incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00113-00-0-8HV-00113-00-0-8IV-00113-00-0-3R
Gasket for 12 mm glass thickness(GB 70)
1 pc. K-17424-12-0-0
Order references
18
Patch Fittings for Glass Doors
Connectors – GB 71for 10 or 12 mm glass thickness
Overpanel connector GB 71 with fin fitting
with adjusting clearance
Glass preparation details page 25
Description Finish PU Order no.
Overpanel connector GB 71incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00114-00-0-8HV-00114-00-0-8IV-00114-00-0-3R
Gasket for 12 mm glass thickness(GB 71)
1 pc. K-17425-12-0-0
Order references
Reinforcing glass panels for toughened glass assemblies and partition walls:
We recommend to use reinforcement glass panes for assemblies with overpanels exceeding the dimension of :
Empirical formula = W + H > 1400 mm
Recommended glass thickness = 12 mm
In order to ensure the safe and permanent operation of your glass assembly, we recommend that you consult your hardware/glass supplier already at the planning stage.
19
Patch Fittings for Glass Doors
Connectors – GB 80, GB 81for 10 or 12 mm glass thickness
Connector GB 80
for cross of four fixed panels
Glass preparation details page 26
Connector GB 81with fin fitting
for cross of four fixed panels plus reinforcing panel
Glass preparation details page 26
Reinforcing glass panels for toughened glass assemblies and partition walls:
We recommend to use reinforcement glass panes for assemblies with overpanels exceeding the dimension of :
Empirical formula = W + H > 1400 mm
Recommended glass thickness = 12 mm
In order to ensure the safe and permanent operation of your glass assembly, we recommend that you consult your hardware/glass supplier already at the planning stage.
20
Description Finish PU Order no.
Connector GB 80incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00116-00-0-8HV-00116-00-0-8IV-00116-00-0-3R
Gasket for 12 mm glass thickness(GB 80)
1 pc. K-17426-12-0-0
Connector GB 81incl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00117-00-0-8HV-00117-00-0-8IV-00117-00-0-3R
Gasket for 12 mm glass thickness(GB 81)
1 pc. K-17427-12-0-0
Order references
Patch Fittings for Glass Doors
Connectors – GB 80, GB 81for 10 or 12 mm glass thickness
21
Glass Preparation Details
Bottom patch GB 10 / Top patch GB 20Overpanel patch GB 30 / Single overpanel strike box GB 30/K
Patch for overpanels and sidelight GB 40 / Corner overpanel strike box GB 40/K
22
Glass Preparation Details
Patch for overpanel and sidelights GB 41 DIN lh/rh Corner overpanel strike box GB 41/K DIN lh/rh
23
Glass Preparation Details
Double overpanel patch GB 51
24
Glass Preparation Details
Connector for overpanels and sidelight GB 60
25
Glass Preparation Details
Overpanel connector GB 70
Overpanel connector GB 71 with fin fitting
26
Glass Preparation Details
Connector GB 80
Connector with fin fitting GB 81
27
Locks and Strike Boxes
The G.U-BKS range of locks for all glass systems consists of centre locks, corner locks and strike boxes suited for 10 mm and 12 mm toughened safety glass.
The locks are prepared for Euro profile cylinders / half cylinders and come with security rosettes. They are usable on DIN lh / DIN rh doors.
The assembly is secure and easy.
28
Locks and Strike Boxes
Centre lock GS 50 S/CL and centre lock strike box GS 50/Kfor 10 or 12 mm glass thickness
Applicable with : Centre lock strike box GS 50/K and lock keeper 6135
Centre lock GS 50 S/CL
prepared for profile cylinder
Centre lock strike box GS 50/K
Applicable with : Centre lock GS 50 S/CL
Glass preparation details page 31
Glass preparation details page 31
29
Description Finish PU Order no.
Centre lock GS 50 S/CLincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00125-00-0-8HV-00125-00-0-8IV-00125-00-0-3R
Centre lock strike box GS 50/Kincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00126-00-0-8HV-00126-00-0-8IV-00126-00-0-3R
Gasket for 12 mm glass thickness(GS 50 S/CL, GS 50/K)
1 pc. K-17429-12-0-0
Order references
Locks and Strike Boxes
Centre lock GS 50 S/CL and centre lock strike box GS 50/Kfor 10 or 12 mm glass thickness
30
Locks and Strike Boxes
Corner lock GS 50Sfor 10 or 12 mm glass thickness
Corner lock GS 50S
prepared for profile cylinder
Applicable with : Overpanel strike boxes GB 30/K, GB 40/K, GB 41/K; lock keeper 6135, floor socket 6139 (see accessories)
Glass preparation details page 31
Description Finish PU Order no.
Corner lock GS 50Sincl. gasket for 10 mm glass
Stainless steel matt Stainless steel polished Brass colour
1 pc.1 pc.1 pc.
V-00124-00-0-8HV-00124-00-0-8IV-00124-00-0-3R
Gasket for 12 mm glass thickness(GS 50S)
1 pc. K-17428-12-0-0
Order references
31
Centre lock GS 50 S/CLCentre lock strike box GS 50/K
Glass Preparation Details
Corner lock GS 50S
32
33
Accessories for All Glass Systems
The well-assorted accessory programme allows to considerably extend the range of hardware applications.
The same high quality standards are applied as throughout the complete G.U-BKS fitting range.
34
Accessories for All Glass Systems
Floor bearing 6115
with tapered spindle
Applicable with : Bottom patch GB 10
Top pivot 6118/9with pin turnable upward to disappear
with 15 mm pivot, for mounting on timber and steel frames
Applicable with : Top patch GB 20
Description Finish PU Order no.
Floor bearing 6115 1 pc. V-00131-00-0-0
Top pivot 6118/9 1 pc. V-00132-00-0-0
Order references
35
Top pivot 6124with fixing plate
with 15 mm pivot, for mounting on timber, aluminium and steel frames
Applicable with : Top patch GB 20
Accessories for All Glass Systems
Top pivot 6129with brass plug
with 15 mm pivot, used as wall ancjor, pre-drill 12 mm
Applicable with : Top patch GB 20
Threaded pin 6130with brass plug
for wall mounting of overpanel patch GB 30 and strike box GB 30/K
Description Finish PU Order no.
Top pivot 6124 Stainless steelBrass
1 pc.1 pc.
V-00133-00-0-8HV-00133-00-0-3R
Top pivot 6129 1 pc. V-00134-00-0-0
Threaded pin 6130 1 pc. V-00135-00-0-0
Order references
36
Accessories for All Glass Systems
Floor socket 6139
Applicable with : Corner lock GS 50S
Description Finish PU Order no.
Lock keeper plate 6135 Stainless steel 1 pc. V-00136-00-0-8H
Floor socket 6139 stainless steel 1 pc. V-00140-00-0-8H
Order references
Lock keeper plate 6135with square aperture
Applicable with : Centre lock GS 50 S/CL
37
Adjustable eccentric floor socket B 9028
Applicable with : Corner lock GS 50S
Fixing plate 6140
for wall mounting of overpanel fittings GB 30 and GB 30/K
Description Finish PU Order no.
Eccentric fl oor socket B 9028 1 pc. B 9028 0000
Fixing plate 6140 AL-EV1 1 pc. V-00142-00-0-1
Order references
Accessories for All Glass Systems
38
39
Door Closers
Based on decades of experience in the development of door closers, the Gretsch-Unitas group of companies offers a comprehensive programme for a large variety of applications.
Regardless of whether it is an overhead door closer or a floor spring – mature technology and high product quality allow for long lasting and reliable functionality.
A multitude of variants makes it possible to meet the requirements of almost any location.
Fabricators and end users benefit from the high level of assembly and using convenience provided by G.U-BKS door closers.
The products are designed and worked to allow for simple and efficient installation.
40
EN 1154: 1996 + A1: 2002 4 8 3 1 1 46
06 0672-CPD-0094
Product features Quality tested and controlled to EN 1154.
Closing force continuously adjustable from size 3 to 6 (to EN 1154).
Continuous adjustment of valves for
– closing speed – latching force – backcheck
All valves are colour-coded and adjustable from the front.
Plastic valves with optimum thermal characteristics provide consistent operation also with changes in temperature.
Security valves protect against forced operation in both closing and opening direction.
Max. door opening and closing angle 180°.
Controlled closing from any opening angle.
All fixings concealed.
Easy assembly of slide rail through positive-locking insertion into mounting bar.
Available in numerous variants.
Cover in various colours.
Cover fixed with safety lock.
Optional : adjustable hold-open device for door opening angles of 70° up to 150° with variable hold-open force.
Application On single-action swing doors of timber, glass, PVC, aluminium and steel.
DIN lh and DIN rh usable.
On single and double leaf doors.
On interior and exterior fire and smoke protection door.
Standard mounting on hinge side / opposite to hinge side.
Transom mounting on hinge side / opposite to hinge side.
Overhead Door Closer OTS 730 with Slide Rail
Overhead door closer OTS 730 Finish PU Order no.
with slide rail silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-13429-00-0-1K-13429-00-0-5K-13429-00-0-7
with mechanic hold-open device MF-EA, (on-/off switchable)
silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-13484-00-0-1K-13484-00-0-5K-13484-00-0-7
Fixing plate for glass doors silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-13981-00-0-1K-13981-00-0-5K-13981-00-0-7
Order referencesSize 3 Door leaf width up to 950 mm
Size 4 Door leaf width up to 1100 mm
Size 5 Door leaf width up to 1250 mm
Size 6 Door leaf width up to 1400 mm
Closing forces (sizes) to EN 1154
41
EN 1154: 1996 + A1: 2002 4 8 1 0 1 44
06 2006-OTS-0002
Overhead Door Closer OTS 630 with Slide Rail
Overhead door closer OTS 630 Finish PU Order no.
with slide rail silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-14068-00-0-1K-14068-00-0-5K-14068-00-0-7
with mechanic hold-open device MF-EA, (on-/off switchable)
silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-14070-00-0-1K-14070-00-0-5K-14070-00-0-7
Fixing plate for glass doors silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-13773-00-0-1K-13773-00-0-5K-13773-00-0-7
Order references
Application On single-action swing doors of timber, glass, PVC, aluminium and steel.
DIN lh and DIN rh usable.
Standard mounting on hinge side / opposite to hinge side.[1]
Transom mounting on hinge side / opposite to hinge side.[1]
Size 1 Door leaf width up to 750 mm
Size 2 Door leaf width up to 850 mm
Size 3 Door leaf width up to 950 mm
Size 4 Door leaf width up to 1100 mm
Product features Closing force continuously adjustable from size 1 to 4 (to EN 1154).
Continuous adjustment of valves for
– closing speed – latching force
All valves are colour-coded and adjustable from the front.
Plastic valves with optimum thermal characteristics provide consistent operation also with changes in temperature.
Security valve protects against forced operation.
Max. door opening and closing angle 180°.
Controlled closing from any opening angle.
All fixings concealed.
Easy assembly of slide rail through positive-locking insertion into mounting bar.
Cover in various colours
Cover fixed with safety lock.
Optional : adjustable hold-open device for door opening angles of 70° up to 150° with variable hold-open force.
Closing forces (sizes) to EN 1154
[1] Advice: Use door stop at maximum opening angle.
42
EN 1154: 1996 + A1: 2002 4 8 2 1 1 46
06 0672-CPD-0092
Overhead Door Closer OTS 530 with Scissor Action Arm
Overhead door closer OTS 530 Finish PU Order no.
with standard arm silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-13346-00-0-1K-13346-00-0-5K-13346-00-0-7
with hold-open arm MF-EA,(on-/off switchable)
silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-13347-00-0-1K-13347-00-0-5K-13347-00-0-7
Fixing plate for glass doors silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-13773-00-0-1K-13773-00-0-5K-13773-00-0-7
Order references
Application On single-action swing doors of timber, glass, PVC, aluminium and steel.
DIN lh and DIN rh usable.
On interior and exterior fire and smoke protection doors.
Standard mounting on hinge side, transom mounting opposite to hinge side.
Size 2 Door leaf width up to 850 mm
Size 3 Door leaf width up to 950 mm
Size 4 Door leaf width up to 1100 mm
Size 5 Door leaf width up to 1250 mm
Size 6 Door leaf width up to 1400 mm
Product features Closing force continuously adjustable on the side from size 2 to 6 (to EN 1154).
Continuous adjustment of valves for
– closing speed– latching force– delayed closing action– backcheck
All valves are colour-coded and adjustable from the front.
Plastic valves with optimum thermal characteristics provide consistent operation also with changes in temperature.
Security valves protect against forced operation in both closing and opening direction.
Max. door opening and closing angle 180°.
Controlled closing from any opening angle.
Easy assembly of slide rail through positive-locking insertion into mounting bar.
Cover in various colours.
Cover fixed with safety lock.
Optional : adjustable hold-open device for door opening angles of 70° up to 150° with variable hold-open force.
Closing forces (sizes) to EN 1154
43
EN 1154: 1996 + A1: 2002 4 8 2 0 1 45
06 2006-OTS-0002
Overhead Door Closer OTS 440 with Scissor Action Arm
Overhead door closer OTS 440 Finish PU Order no.
with standard arm silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-16545-00-0-1K-16545-00-0-5K-16545-00-0-7
with hold-open arm silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-16546-00-0-1K-16546-00-0-5K-16546-00-0-7
Fixing plate for glass doors silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-16553-00-0-1K-16553-00-0-5K-16553-00-0-7
Slide rail with slide arm silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-16652-00-0-1K-16652-00-0-5K-16652-00-0-7
Order references
Application On single-action swing doors of timber, glass, PVC, aluminium and steel.
DIN lh and DIN rh usable.
Standard mounting on hinge side, transom mounting opposite to hinge side.
Also usable with slide arm for sizes 2 and 3 (to EN 1154).
Size 2 Door leaf width up to 850 mm
Size 3 Door leaf width up to 950 mm
Size 4 Door leaf width up to 1100 mm
Size 5 Door leaf width up to 1250 mm
Product features Closing force continuously adjustable from size 2 to 5 (to EN
1154). Adjustment from the side, no displacement of closer body.
Continuous valve adjustment from the front for
– closing speed– latching force
Plastic valves with optimum thermal characteristics provide consistent operation also with changes in temperature.
Security valve protects against forced operation.
Max. door opening and closing angle 180°.
Controlled closing from any opening angle
Aluminium case in modern design.
Optional : adjustable hold-open device for door opening angles of 70° up to 150° with variable hold-open force.
Closing forces (sizes) to EN 1154
44
EN 1154: 1996 + A1: 2002 4 8 2 0 1 44
06 2006-OTS-0002
Overhead Door Closer OTS 210 with Scissor Action Arm
Overhead door closer OTS 210 Finish PU Order no.
with standard arm silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-15710-00-0-1K-15710-00-0-5K-15710-00-0-7
with hold-open arm silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-15711-00-0-1K-15711-00-0-5K-15711-00-0-7
Fixing plate for glass doors silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-16552-00-0-1K-16552-00-0-5K-16552-00-0-7
Slide rail with slide arm silver colourdark bronzewhite (RAL 9016)
1 pc.1 pc.1 pc.
K-16652-00-0-1K-16652-00-0-5K-16652-00-0-7
Order references
Application On single-action swing doors of timber, glass, PVC, aluminium and steel.
DIN lh and DIN rh usable.
Standard mounting on hinge side, transom mounting opposite to hinge side.
Also usable with slide arm for closing force sizes 2 and 3 (to EN 1154).
Size 2 Door leaf width up to 850 mm
Size 3 Door leaf width up to 950 mm
Size 4 Door leaf width up to 1100 mm
Product features Closing force continuously adjustable from size 2 to 4 (to EN 1154). Adjustment by moving the closer body and turningthe arm bearing upside down.
Continuous valve adjustment from the front for
– closing speed– latching force
Plastic valves with optimum thermal characteristics provide consistent operation also with changes in temperature.
Security valve protects against forced operation.
Max. door opening and closing angle 180°.
Controlled closing from any opening angle
Aluminium case in modern design.
Optional : adjustable hold-open device for door opening angles of 70° up to 150° with variable hold-open force.
Closing forces (sizes) to EN 1154
45
EN 1154: 1996 + A1: 2002 4 8 4 0 1 43
GU 2006-UTS-0003
Floor Spring UTS 840
Floor spring UTS 840 Finish PU Order no.
Size 3Size 4
1 pc.1 pc.
K-17442-25-0-0K-17442-33-0-0
Cover plate Stainless steel mattBrass colour
1 pc.1 pc.
V-00704-00-0-8HV-00704-00-0-3R
Order references
Application For interior and exterior double-action swing doors of timber, glass, PVC, aluminium and steel.
DIN lh and DIN rh usable.
Maximum weight of door leaf 120 kg.
Size 3 Door leaf width up to 1000 mm
Size 4 Door leaf width up to 1250 mm
Product features Available sizes 3 and 4 to EN 1154.
Continuous adjustment of valves for
– closing speed– latching force
Longitudinal, lateral and vertical floor spring position adjustable within the cement case.
Plastic valves with optimum thermal characteristics provide consistent operation also with changes in temperature.
Max. door opening and closing angle 130°.
Hold-open at 90°.
Mechanic backcheck from a door opening angle of approx. 80°.
Height of case – only 40 mm.
Closing forces (sizes) to EN 1154
46
EN 1154: 1996 + A1: 2002 4 8 1 0 1 44
06 2006-UTS-0003
Floor Spring UTS 42
Floor spring UTS 42 PU Order no.
without hold-open
mechanic hold-open at 90°/85° [1]
mechanic hold-open at bei 95°/90° [1]
1 pc.
1 pc.
1 pc.
K-15342-00-0-0
K-15343-00-0-0
K-15344-00-0-0
Cover plate
stainless steel 1 pc. K-15385-00-0-8
Pottant 1 pc. K-13048-00-0-0
Order references
Application For single-action and double-action swing doors of timber, glass, PVC, aluminium and steel.
DIN lh and DIN rh usable.
Maximum weight of door leaf 120 kg.
Size 1 Door leaf width up to 750 mm
Size 2 Door leaf width up to 850 mm
Size 3 Door leaf width up to 950 mm
Size 4 Door leaf width up to 1100 mm
Product features Closing force continuously adjustable from size 1 to 4 (to EN 1154).
Continuous adjustment of valves for
– closing speed– latching force
Longitudinal, lateral and vertical floor spring position adjustable within the cement case.
Plastic valves with optimum thermal characteristics provide consistent operation also with changes in temperature.
Security valve protects against forced operation.
Max. door opening and closing angle 175°.
Hold-open at 90° / 95°.[1]
Mechanic backcheck from a door opening angle of approx. 80°.
Removable divided axle.
Height of case – only 40 mm.
Closing forces (sizes) to EN 1154
[1] double-action / single-action swing doors
47
Sliding Wall Systems
Sliding Wall Systems
All glass system shopMaster GSW-M
All glass system shopMaster GSW-A
48
All Glass Systems
shopMaster GSW-M
The all glass system shopMaster GSW-M is used in:
banks, halls and hotels
shop in shop areas in shop-ping centres and exclusive office buildings
training and conference rooms
The glass sliding partition system shopMaster GSW-M offers the possibility of individual solutions for the realisation of partitions and shop front designs for shop in shop concepts.
Planners are set no boundaries – there is a solution for almost any floor plan.
According to requirements, glass sliding partitions are available in linear, curved or segmented design.
The units can be arranged in a variety of ways, a floor guide is not needed. The compact design only requires limited space for the running track and parking niche.
Side passage may be provided e.g. by means of side hung sliding swing panels equipped with door closers.
Due to the small height of the running track, installation flush with the ceiling is possible almost everywhere.
Based on latest production engineering, the runners are supported in high-quality ball bearings, thus allowing for reliable operation and smooth opening/closing of the panels.
Secure locking is provided by high quality locks and fittings. Special fittings prevent the clamp profiles from falling in the event of glass breakage.
49
Maximum panel height 3500 mm
Maximum panel width 1250 mm
Maximum panel weight 150 kg
Available glass thicknesses 10/12 mm
Running track type linear / angled / in segmentscurved from a radius of 3000 mm
Surfaces silver colour E6/EV1 anodisedRAL (powder coating)stainless steel look
shopMaster GSW-M
Technical data
Special solutions on request
carriage
end cap
end cap
facefi xed locking bolt (optional, depending on type of panel)
extension profi le(optional)
running track,2-part
basic profi le
clamping profi le
toughened glass10 / 12 mm
toughened glass10 / 12 mm
closing profi le
50
All Glass Systems
shopMaster GSW-A
The all glass system shopMaster GSW-A is used in:
banks, halls and hotels
shop in shop areas in shop-ping centres and exclusive office buildings
training and conference rooms
The glass sliding partition system shopMaster GSW-A offers the possibility of individual solutions for the realisation of partitions and shop front designs for shop in shop concepts.
Various parking niche options provide the planner with many possibilities. The compact construction requires only minimum space for running track and parking niches.
In state-of-the-art technology, the modules are equipped with PVC coated rollers supported in ball bearings. Thus, reliable ope-ration as well as smooth running of the panels are achieved.
The innovative modular con-struction allows the control and movement of panels of variable design and size. Sliding units may be connected to the modules individually – depending on the requirements.
The perfect mobility of the automatic all glass sliding partition shopMaster GSW-A is achieved with the combination of automated control via motor and perfect functioning of the mechanics.
The floor guide provides additional stability and utmost convenience for the user. For safety reasons, it is possible to move the automatic all glass sliding partition manually in case of power failure.
Due to the small height of the running track of 86,5 mm, installation flush with the ceiling is possible almost everywhere.
51
shopMaster GSW-A
Type of units
Sliding panel
with drive and current collecting module, each positioned above the top rail profile. Bottom guidance by means of rolling pin in floor track.
Side hung end panel
with automatic closing and opening when the all glass sliding partition is locked or released.
Operating functions decelerated movement to end
positions
manual operation of driven panel possible in case of power failure
running function can be activated from any position without test run
obstacle recognition (stop when obstacle is touched)
maximum opening force 150 N
manufactured in accordance with BGR 232 (ZH 1/494) and VDE regulations
easy drive maintenance without having to dismantle the ceiling
floor guide 20 x 20 mm
automatic locking
emergency release via profilecylinder
available with fully automaticpanel cover
Control unit Multifunction button switch
»OPEN – CLOSE« (automatic)
passage opening »OPEN – CLOSE« (1 panel controllable separately)
Technical dataMaximum panel height 3500 mm* Nominal voltage 230 V/AC, 50 Hz
Maximum panel width 1250 mm* Nominal power 230 W
Maximum panel weight 160 kg Operating current 24 V/DC
Maximum number of panels 32 Ambient temperature -15 °C up to +50 °C
Available glass thicknesses 10/12 mm Protection class IP 20
Speed adjustable within 50 – 150 mm/s
Running track type linear / angled / curved from a radius of 3000 mm*
Surfaces silver colour E6/EV1 anodisedRAL (powder coating)
stainless steel matt fi nish**
*Special dimensions on request **Module covers anodised, simulated stainless steel finish
52
53
Swing Door Drives
Swing Door Drives
Swing door drive turnMaster
Underfloor drive swingMaster DTU
54
Swing Door Drives
turnMaster
The microprocessor controlled electromechanic swing door drive turnMaster easily adapts to the individual requirements of the particular location.
Its design and stable workman-ship allow for reliable functio-ning and outstanding running smoothness.
The installation of the drive is simple and time-saving. Retrofitting and modernising existing door systems is easy and efficient.
Even large and heavy doors can be controlled and moved effortlessly by the user. This provides convenient and safe passage also for elderly or handicapped persons.
With hands free activation, the drive system is ideally suited to areas with increased hygienic demands, e.g. in hospitals.
The swing door drive turnMaster is available in pull open and push open version.
G.U-BKS swing door drives are used in:
projects where barrier-free passage is demanded
facilities for the disabled
residences for the elderly
areas of increased hygienic demands (clinics)
pharmacies
surgeries
food enterprises
hotels and restaurants
55
135
Sensor Sensor
104
turnMaster TM
Product features low-noise operation
suitable for exterior and interior doors
easy assembly, start-upand maintenance
integrated function selection switch with LED indication
mechanic release from hold-open position
adjustable wind pressure function
dynamic adjustment of hold open time
connection of motor driven lock, electric door opener and safety sensors possible
slot for radio receiver card
same design as with the G.U-BKS door closer range
Technical data
Functioning modes automatic operation
servo operation
low-energy operation
Type of drive turnMaster TM
Execution push or pull open
Opening electro-mechanic
Closing by spring force
Closing force[1] size 3 – 6 push open, size 3 – 5 pull open
With power failure door closer function
Opening angle 130° push open, 98° pull open
Opening speed adjustable
Hold open time adjustable
Mains voltage 230 V/AC, 50 Hz
Power consumption 200 VA
Maximum weight of door leaf 250 kg
Door leaf widths 700 – 1400 mm push open, 700 – 1250 mm pull open
Ambient temperature for dry rooms only; -15 °C up to +50 °C
Protection class IP 20
Dimensions 700 x 104 x 135 mm
Power supply for peripheral accessories
24 V/DC, 1 A
Programme selection switch integrated; with LED indication (altern.: external);operating modes: off, automatic, closing time, permanent open
Options push open arm soffi t depths up to 250 mmaxle extension
[1] Sizes to EN 1154
The accordance to DIN 18650 was certifi ed by TÜV.(TÜV = German Technical Supervisory Association)
56
Underfloor Drive for Swing Doors
swingMaster DTU
G.U-BKS underfloor drives for swing doors are used in:
historical buildings
shopping centres
hospitals
hotels
modern and transparent entrance areas
Transparency and concealed mechanics combined with functionality and high quality performance: The innovative underfloor drive swingMaster DTU offers architects and planners a unique possibility of automating swing door systems.
On the basis of a well proven technology, all demands on a reliable, modern swing door drive are realised.
In modern shop construction it captivates by providing unobtrusive automation.
With this drive system the automation of all glass entrance systems or doors in historical or listed buildings is efficient and provides comfortable access to all users.
The use of an optional battery allows for a desmoking fuction.
57
swingMaster DTU
Technical data
Accessories stainless steel cover plate, 240 grid
connection to building management technology
Options safety sensors in opening and closing direction
Type of drive swingMaster DTU
Type 1 door leaf DTU-1 2 door leaves DTU-2 [1]
Opening angle 110°
Mains voltage 230 V/AC, 50 Hz
Dimensions
Cement box 340 x 430 x 156 mm
Floor recess 350 x 470 x 156 mm [2]
Weight of door leaf 200 kg/max. door width 1100 mm180 kg/max. door width 1200 mm150 kg/max. door width 1400 mm
Operation modes Off / Automatic / Exit / Permanent open
With power failure optional battery for one-time opening
Hold open time adjustable
Opening speed adjustable
Special solutions on request. [1] Available on request. [2] plus additional space for wiring
outside outside
inside
DIN lh opening towards the inside DIN rh opening towards the inside
inside
Dimensions
Installation examples
cement box out of galvanised steel
58
59
Automatic Sliding Door Systems
Automatic Sliding Door Systems
Sliding door compactMaster
Sliding door econoMaster
Telescopic sliding door compactMaster
60
Sliding Doors
compactMaster
G.U-BKS sliding doors are used in:
airports
shopping centres
banks
public buildings
hospitals
homes for the elderly
homes for the disabled
safety zones
any smart entrance solution
G.U-BKS sliding door systems offer functionality, cost-effecti-veness and security wherever they are applied.
With G.U-BKS sliding doors your entrance is user-friendly and energy saving. The operation of the door is clear and simple.
The compactMaster meets all requirements on comfortable operation and design.
With a vertical dimension of 100 mm, the drive unit easily fits into the architecture of the building.
Its compact and slim design beautifully harmonizes with sophisticated modern glass façades.
G.U-BKS sliding doors are tested and suitable for the use with escape and rescue routes.
Development and manufacture are carried out in accordance with the prevailing technical regulations and standards.
Our high quality is guaranteed with the certification of our products by acknowledged testing institutes as well as with our own quality control procedures.
61
compactMaster CM and CM-F
Due to intelligent control en-gineering, the drive systemcompactMaster offers maxi-mum safety.
The modular construction of the drive provides quick assembly and easy maintenance.
The potential connection of the automatic door to building management systems via an optional interface is standard.
The compactMaster drive system is tested and suitable for the use with escape and rescue routes (type CM-F).
The accordance to DIN 18650 was certified by TÜV. (TÜV = German Technical Supervisory Association)
Technical data
Type of drive compactMaster CM and CM-F
1 door leaf 2 door leaves
Maximum clearance width 1250 mm 2500 mm
Minimum clearance width[1] 800 mm 1000 mm
Maximum clearance height 2500 mm 2500 mm
Maximum weight of door leaf 100 kg/leaf
Mains voltage 230 V/AC, 50 Hz
Power consumption 160 VA
Hold open time 0 – 255 s
Hold open time key impulse 0 – 255 s
Opening speed max. 0,7 m/s
Closing speed max. 0,7 m/s
Winter opening width adjustable within 50 – 100 % of the clearance width
Ambient temperature for dry rooms only; -15 °C up to +50 °C
Protection class IP 20
Special solutions on request [1] Standard widths with regard to total dimension of drive system and local situation
62
Sliding Doors
econoMaster
G.U-BKS sliding doors are used in:
airports
shopping centres
banks
public buildings
hospitals
homes for the elderly
homes for the disabled
safety zones
any smart entrance solution
G.U-BKS sliding door systems offer functionality, cost-effecti-veness and security wherever they are applied.
With G.U-BKS sliding doors your entrance is user-friendly and energy saving. The operation of the door is clear and simple.
The drive system econoMaster represents a new generation of cost-efficient sliding door drives.
High performance combined with technically mature mecha-nics – experience the difference to other “low cost” drives!
The use of large rollers gua-rantees smooth running and longevity.
Even large doors with weights up to 80 kg per door leaf openquietly and fast.
The small height of the drive (130 mm) together with a slim frame profile provide both a stylish appearance and functionality to any entrance.
The G.U-BKS drive system econoMaster – your solution for the cost-efficient automa-tion of fine entrances.
63
econoMaster EM
Due to its slim design, the drive system econoMaster easily fits into the architecture of any building.
The operational parameters specified above can be set accurately in a quick and easy way.
Due to its running smoothness and speed as well as its simple assembly, the econoMaster is an interesting product for both manufacturer and user.
Technical data
Type of drive econoMaster EM
1 door leaf 2 door leaves
Maximum clearance width 1250 mm 2500 mm
Minimum clearance width[1] 800 mm 1000 mm
Maximum clearance height 2500 mm 2500 mm
Maximum weight of door leaf 80 kg/leaf
Mains voltage 230 V/AC, 50 Hz
Power consumption 50 VA
Hold open time 0 – 60 s
Speed max. 0,7 m/s
Winter opening width 80 % of the clearance width
Ambient temperature for dry rooms only; -15 °C up to +50 °C
Protection class IP 20
[1] Standard widths with regard to total dimension of drive system and local situation
The accordance to DIN 18650 was certified by TÜV. (TÜV = German Technical Supervisory Association)
64
Telescopic Sliding Doors
compactMaster
G.U-BKS telescopic sliding doors are used in:
airports
shopping centres
banks
public buildings
hospitals
homes for the elderly
homes for the disabled
safety zones
any smart entrance solution
G.U-BKS sliding door systems offer functionality, cost-effecti-veness and security wherever they are applied.
With G.U-BKS sliding doors your entrance is user-friendly and energy saving. The operation of the door is clear and simple.
G.U-BKS telescopic sliding doors are ideally suited when it comes to provide a wide passage area for maximum passenger flow where space is limited.
With slim door panel profiles, the telescopic sliding door system offers a very stylish and attractive appearance to the entrance area.
With a vertical dimension of 110 mm, the drive unit easily fits into the architecture of the building.
The option between 2-leaf and 4-leaf variants provides versatile creative solutions to meet individual requirements.
G.U-BKS telescopic sliding doors are tested and suitable for the use with escape and rescue routes.
65
compactMaster CMT and CMT-F
G.U-BKS telescopic sliding doors are available with 2 or 4 leaves.
Telescopic sliding doors are especially suitable to provide large passage areas even in restricted structural openings.
G.U-BKS telescopic sliding doors are tested and suitable for the use with escape and rescue routes (type CMT-F).
Types
Technical data
4 leaves, with fixed side lights 4 leaves, with fixed side lights and fanlights
4 leaves, only door leaves Telescopic 2- or 4-leaf doors provide large passage widths.
Type of drive compactMaster CMT For emergency routes: compactMaster CMT-F
2 door leaves 4 door leaves 2 door leaves 4 door leaves
Maximum clearance width 2500 mm 3500 mm 2200 mm 3000 mm
Minimum clearance width[1] 900 mm 1800 mm 900 mm 1800 mm
Maximum clearance height 2500 mm 2500 mm
Maximum fanlight height 800 mm 800 mm
Maximum weight of door leaf 140 kg/pair of leaves
Mains voltage 230 V/AC, 50 Hz
Power consumption 160 VA
Hold open time 0 – 255 s
Hold open time key impulse 0 – 255 s
Opening speed max. 0,7 m/s
Closing speed max. 0,7 m/s
Winter opening width adjustable within 50 – 100 % of the clearance width
Ambient temperature for dry rooms only; -15 °C up to +50 °C
Protection class IP 20
Special solutions on request [1] Standard widths with regard to total dimension of drive system and local situation
The accordance to DIN 18650 was certified by TÜV. (TÜV = German Technical Supervisory Association)
66
67
Curved Sliding Doors / Revolving Doors
Curved Sliding Doors / Revolving Doors
Curved sliding door compactMaster
Standard revolving door GRA
All glass revolving door GGG
Large-capacity revolving door GGR/GGV
Security revolving door / Security curved sliding door GSI
68
Curved Sliding Doors
compactMaster
G.U-BKS curved sliding doorsare used in:
hotels
administration buildings
banks
entrances with sophisticated architecture
G.U-BKS sliding door systems offer functionality, cost-effecti-veness and security wherever they are applied.
With G.U-BKS sliding doors your entrance is user-friendly and energy saving. The operation of the door is clear and simple.
The curved sliding door system with slim profile door leaves provides freedom in aesthetic design – it will be the eye catcher of your stylish entrance area.
With a vertical dimension of 115 mm, the drive unit easily fits into the architecture of the building.
G.U-BKS curved sliding doors are tested and suitable for the use with escape and rescue routes.
Sophisticated design and innovative technology:
With G.U-BKS curved sliding doors you make a statement!
69
compactMaster CMR and CMR-F
G.U-BKS curved sliding doors offer versatile creative possibilities.
Options EMCO mat, coir matting
halogen spot lights to be installed in the aluminium ceiling
Variants semicircle
divided circle
complete circle 360°
radii from 1000 – 3000 mm
integration in building management and access control systems.
Technical data
Type of drive compactMaster CMR and CMR-F
1 door leaf 2 door leaves
Maximum clearance width 1250 mm 2500 mm
Minimum clearance width[1] 800 mm 1000 mm
Maximum clearance height 2500 mm 2500 mm
Maximum weight of door leaf 100 kg/leaf
Mains voltage 230 V/AC, 50 Hz
Power consumption 160 VA
Hold open time 0 – 255 s
Hold open time key impulse 0 – 255 s
Opening speed max. 0,7 m/s
Closing speed max. 0,7 m/s
Winter opening width adjustable within 50 – 100 % of the clearance width
Ambient temperature for dry rooms only; -15 °C up to +50 °C
Protection class IP 20
Special solutions on request [1] Standard widths with regard to total dimension of drive system and local situation
G.U-BKS curved sliding doors are tested and suitable for the use with escape and rescue routes (type CMR-F).
The accordance to DIN 18650 was certifi ed by TÜV.(TÜV = German Technical Supervisory Association)
70
Revolving Doors
Standard
Standard revolving doors series GRA are used in:
hotels and restaurants
office and administration buildings
service stations
banks
The standard revolving door series GRA is characterised by a framed turn stile and by drum walls consisting of an aluminium-glass-construction with slim profiles or thermally insulated smooth panels.
Due to their variable construc-tion and to many options, G.U-BKS revolving doors meet individual demands in dimen-sions and design offering high quality solutions for many buil-ding and renovation projects.
Comfortable, unobstructed and safe passage is as important as a reduction of energy costs and the possible uses revolving doors offer to the operator. Dirt, exhaust and traffic noise are kept outside.
In addition to an impressive and individual design, functionality, thermal insulation and noise protection are the features of building entrances realised with G.U-BKS revolving door systems.
71
Drum walls curved 9 mm clear laminated glass
curved, smooth-surfaced panel (with 30 mm thermal insulation)
Surfaces RAL finish
silver anodised
colour anodised
stainless steel 240 grid satin polished
bright polished stainless steel
Standard Revolving Door GRA
Turnstile 3 or 4 rigid leaves with10 mm clear toughened glass
folding mechanism for summer position possible(height of canopy 350 mm)
Night locking espagnolette locks in thedoor leaves
electromechanical lockingunit for the turnstile
manual or automatic night sliding doors running outside
Drive manual
manual with automaticpositioning
semi-automatic (push-and-go)
fully automatic
In the case of an automatic drive, the canopy fascia profile must have a height of 175 mm at the minimum.
Options halogen spot lights to be installed in the aluminium ceiling
stainless steel floor ring (V2A)
vertical or horizontal handles of stainless steel
EMCO mat, coir matting
roof outside the building waterproof
Further options on request.
D* A* B* C / 3 door leaves C / 4 door leaves E
1800 2100 – 3000 175 – 800 ~ 830 ~ 1220 1860
1900 2100 – 3000 175 – 800 ~ 875 ~ 1290 1960
2000 2100 – 3000 175 – 800 ~ 920 ~ 1350 2060
2100 2100 – 3000 175 – 800 ~ 965 ~ 1420 2160
2200 2100 – 3000 175 – 800 ~ 1010 ~ 1490 2260
2300 2100 – 3000 175 – 800 ~ 1060 ~ 1560 2360
2400 2100 – 3000 175 – 800 ~ 1105 ~ 1620 2460
2500 2100 – 3000 175 – 800 ~ 1150 ~ 1690 2560
2600 2100 – 3000 175 – 800 ~ 1195 ~ 1760 2660
2700 2100 – 3000 175 – 800 ~ 1240 ~ 1820 2760
2800 2100 – 3000 175 – 800 ~ 1285 ~ 1890 2860
2900 2100 – 3000 175 – 800 ~ 1330 ~ 1960 2960
3000 2100 – 3000 175 – 800 ~ 1375 ~ 2030 3060
3100 2100 – 3000 175 – 800 ~ 1420 ~ 2090 3160
3200 2100 – 3000 175 – 800 ~ 1465 ~ 2160 3260
3300 2100 – 3000 175 – 800 ~ 1510 ~ 2230 3360
3400 2100 – 3000 175 – 800 ~ 1555 ~ 2290 3460
3500 2100 – 3000 175 – 800 ~ 1600 ~ 2360 3560
3600 2100 – 3000 175 – 800 ~ 1645 ~ 2430 3660
*Special dimensions on request
72
Revolving Doors
All glass
All glass revolving doors series GGG are used in:
hotels
office and administration buildings
banks
The all glass revolving door series GGG is the highlight of a perfect integration of an entrance system in a glass façade.
Glass roof and optional floor drive provide unique creative possibilities for architects aiming at maximum transparancy.
Depending on the positioning of the door leaves, revolving doors offer efficient protection against draughts.
73
All Glass Revolving Door GGG
Turnstile 3 or 4 rigid door leaves of12 mm clear toughened glass with slim frames
Drum walls curved 9 mm clear glass with 40 mm skirting profile
Night locking patch locks on door leaves
manual night sliding doors running outside
Surfaces RAL finish
silver anodised
colour anodised
stainless steel 240 grid satin polished
bright polished stainless steel
Drive manual
manual with automatic positioning
semi-automatic (push-and-go)
fully automatic
Automatic drives are installed underfloor.
Options vertical or horizontal handles of stainless steel
EMCO mat, coir matting
stainless steel floor ring (V2A)
Further options on request.
D* A* B** C / 3 door leaves C / 4 door leaves E
1800 2100 – 3000 16 ~ 830 ~ 1220 1860
1900 2100 – 3000 16 ~ 875 ~ 1290 1960
2000 2100 – 3000 16 ~ 920 ~ 1350 2060
2100 2100 – 3000 16 ~ 965 ~ 1420 2160
2200 2100 – 3000 16 ~ 1010 ~ 1490 2260
2300 2100 – 3000 16 ~ 1060 ~ 1560 2360
2400 2100 – 3000 16 ~ 1105 ~ 1620 2460
2500 2100 – 3000 16 ~ 1150 ~ 1690 2560
2600 2100 – 3000 18 ~ 1195 ~ 1760 2660
2700 2100 – 3000 18 ~ 1240 ~ 1820 2760
2800 2100 – 3000 18 ~ 1285 ~ 1890 2860
2900 2100 – 3000 18 ~ 1330 ~ 1960 2960
3000 2100 – 2600 18 ~ 1375 ~ 2030 3060
*Special dimensions on request **or thicker, depending on static requirements
74
Revolving Doors
Large-capacity
Large-capacity revolving doors series GGR/GGV are used in:
shopping centres
airports
furniture stores
hospitals
health and rehabilitation clinics
hotels
The large-capacity revolving door series GGR/GGV is the elegant and energy-saving solution when it comes to managing large quantities of people.
This door combines elegant design and high functionality in an ideal way. The passage with shopping trolleys, baby carriages or wheelchairs is possible without any problem.
Whether with or without central display case, night locking or illumination – this revolving door offers a large variety of design options.
The GGR/GGV series is tested and licensed for use with escape and rescue routes.
As a matter of course, maximum safety is guaranteed by fixed sensors and sensors moving with the turnstile.
75
Large-capacity Revolving Door GGR/GGV
Turnstile 3 or 4 pivoted door leaves with 6 mm clear toughened glass
Night locking espagnolette locks in the door leaves
electromechanical locking unit for the turnstile
manual or automatic night sliding doors running outside
Surfaces RAL finish
silver anodised
colour anodised
stainless steel 240 grid satin polished
bright polished stainless steel
Drum walls curved 9 mm clear laminated glass
curved, smooth-surfaced panel (with 30 mm thermal insulation)
Drive fully automatic via radar including safeguard for primary and secondary closing edges, sensors and contact strips for heel protection, storm lock
Options halogen spot lights to be installed in the aluminium ceiling
stainless steel floor ring (V2A)
push button for disabled persons
EMCO mat, coir matting
roof outside the building waterproof
Further options on request.
D* A* B* C / 3 door leaves C / 4 door leaves E
3600 2100 – 2500 500 – 800 ~ 1690 ~ 2455 3720
4200 2100 – 2500 500 – 800 ~ 1972 ~ 2864 4320
4800 2100 – 2500 500 – 800 ~ 2253 ~ 3274 4920
5400 2100 – 2500 500 – 800 ~ 2535 ~ 3683 5520
6000 2100 – 2500 500 – 800 ~ 2817 ~ 4092 6120
6200 2100 – 2500 500 – 800 ~ 2911 ~ 4228 6320
*Special dimensions on request
76
Security Doors / Access Control Doors
Security revolving door / Security curved sliding door
Security revolving doors and security curved sliding doors are used in:
banks
insurance companies
computer centres
research centres
authorities
ministries
industrial buildings
office and administration buildings
Security revolving doors and security curved sliding doors are a safe and comfortable solution for all applications where a high degree of security is required, e.g. in computer centres, banks, ministries.
The admission of individual persons is controlled via electronic control systems providing smooth passage in both directions.
With a very high proportion of glass, the design of the door offers to the user generous space and comfortable passage.
High security of persons admitted is achieved by the use of suitable profile systems which come in a large variety and allow for creative design and adaptation to the architecture of the building.
Security revolving door
Security curvedsliding door
77
Security Revolving Door / Security Curved Sliding Door GSI
Dimensions: Security revolving door GSI
Dimensions: Security curved sliding door GSI
Turnstile 3 or 4 rigid door leaves with 10 mm clear toughened glass (revolving door)
2 curved running leaves with 9 mm clear laminated glass (curved sliding door)
Drum walls curved 9 mm clear laminated glass
curved, smooth-surfaced panel (with 30 mm thermal insulation)
Night locking espagnolette locks in the door leaves
manual or automatic night sliding doors running outside
hook bolt lock in the sliding leaf
Drive fully automatic with control via access control systems such as card readers (provided by the customer)
Surfaces RAL finish
silver anodised
colour anodised
stainless steel 240 grid satin polished
bright polished stainless steel
Options halogen spot lights to be installed in the aluminium ceiling
vertical or horizontal handles of stainless steel
roof outside the building waterproof
further security glazing such as B1
Further options on request.
D* A* B* C / 3 door leaves C / 4 door leaves E
1800 2100 – 3000 350 – 800 ~ 859 ~ 1239 1860
1900 2100 – 3000 350 – 800 ~ 907 ~ 1308 1960
2000 2100 – 3000 350 – 800 ~ 954 ~ 1377 2060
2100 2100 – 3000 350 – 800 ~ 1002 ~ 1446 2160
2200 2100 – 3000 350 – 800 ~ 1050 ~ 1514 2260
*Special dimensions on request
D* A* B* C E
1000 2100 – 3000 350 – 800 ~ 500 1060
1300 2100 – 3000 350 – 800 ~ 600 1360
1500 2100 – 3000 350 – 800 ~ 700 1560
*Special dimensions on request
78
Exclusion of Liability
The glass fittings are constantly being developed by the Gretsch-Unitas group of companies for reasons of
technical progress
product range modification
changed legislation
When using G.U-BKS fittings for toughened glass assemblies, the directives, regulations and legal provisions valid in the particular country are to be observed.
Although this catalogue was compiled with utmost care, we kindly ask you to understand that we cannot assume liability for effects arising from possible errors in product descriptions and illustrations. Thank you.
Fittings for toughened glass assemblies
Order Catalogue
WP00452-04-3-1 08/2007 Printed in Germany
Fitt
ing
s fo
r to
ug
hen
ed g
lass
ass
emb
lies
Ed
itio
n 0
8.2
00
7
Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 3D-71254 DitzingenTel. + 49 (0) 71 56 3 01-0Fax + 49 (0) 71 56 3 01-2 93www.g-u.com
Edition 08.2007
Patch fi ttings for glass doors
Locks and strike boxes Accessories for all glass systems
Sliding wall systems Swing door drives Automatic sliding door systems
Curved sliding doors / Revolving doors
Door closers