7/31/2019 Liebherr Excavator
1/10
Technical Description A 954 B HDHydraulic Excavator
Machine for Industrial ApplicationsOperating Weight 63,0 68,5 tEngine Output 222 kW (302 HP)
The Better Machine.
litronic
7/31/2019 Liebherr Excavator
2/102
Technical Data
EngineRating per ISO 9249______________ 222 kW (302 HP) at 2000 RPMModel __________________________________ Liebherr D 926 TI-EType ____________________________________ 6 cylinder in-line
Bore/stroke ____________________ 122/142 mmDisplacement__________________ 10,0 liters
Engine operation __________________ 4-stroke dieseldirect injection
turbo-charged and after-cooledreduced emissions
Cooling________________________________water-cooledAir cleaner __________________________ dry-type air cleaner with pre-cleaner,
primary and safety elementsFuel tank ____________________________ 706 lElectrical system
Voltage __________________________ 24 VBatteries ________________________ 2 x 110 Ah/12 V
Alternator ______________________ 24 V/80 AEngine idling__________________ sensor controlled
Hydraulic SystemHydraulic pump
for attachment andtravel drive ____________________ Liebherr variable displacement,
swash plate, in line double pumpMax. flow________________________ 2 x 350 l/minMax. hydr. pressure ________ 350 bar
Hydraulic pumpfor swing drive________________ 1 reversible swash plate pump,
closed-loop circuitMax. flow________________________ 185 l/minMax. hydr. pressure ________ 384 bar
Pump regulation __________________ electronic engine speed sensing overentire engine RPM range, pressure-compensation, flow compensation,automatic oil flow optimizer
Hydraulic tank capacity ________ 450 lHydraulic system capacity ____ max. 800 lHydraulic oil filter ________________ 2 full flow filter in return line, 1 high
pressure filter for each main pumpCooler__________________________________ compact radiator/cooler consists of
an intercooler, gear oil and hydraulicoil cooler, mounted in front of theradiator
Modes__________________________________ fixed modes, can also be adjusted bythe operator to adjust engine andhydraulic performance to match jobconditions
LIFT ______________________________ for precise lifting tasksFINE ____________________________ for precision work at high speed i.e.
gradingECO ______________________________ for most economic performance at
best environmental conditionsPOWER__________________________ for max. output
R.P.M. adjustment ________________ stepless adjustment of engine outputvia the r.p.m. at each selected mode
Hydraulic ControlsPower distribution ________________via control valves in single block with
integrated primary and secondarysafety valves
Flow summation ____________to boom and stickOperating controls
Attachment and swing____ proportional via joystick leversTravel ____________________________ proportional via foot pedal
Additional functions______________via foot pedals or joystick pushbuttons
Operators CabCab ________________________________built from deep drawn components, resi-
liently mounted, sound insulated, tintedwindows, front window stores overhead,door with sliding window
Operators seat________________ fully adjustable, shockabsorbing suspen-sion, adjustable to operators weight
Joysticks ________________________ integrated into adjustable seat consolesMonitoring ____________________ menu driven query of current operating
conditions via the LCD display. Auto-matic monitoring, display, warning(acoustical and optical signal) and savingmachine data, for example, engine over-heating, low engine oil pressure or lowhydraulic oil level
Heater/airconditioner______ combined hotwater/airconditioner withdust filter for fresh or circulated airflow
Noise emissionISO 6396 ________________________ LpA (inside cab) = 77 dB(A)2000/14/EC ____________________ LwA (surround noise) = 108 dB(A)
UndercarriageDrive______________________________ axial piston motor with brake valvesTravel speed __________________ 010,0 km/h
Axles______________________________ 90 t excavator axles; oscillating steeringaxle with hydraulic lock (in any position)
Brakes____________________________ discs brakeshydraulically actuated digging andparking brake
Stabilization __________________ 4-point outriggers
AttachmentType ______________________________ combination of resistant steel plates and
cast steel componentsHydraulic cylinders ________ Liebherr cylinders with special seal
system. Shock absorptionPivots ____________________________ sealed, low maintenanceLubrication ____________________ centralized in easily accessible locationsHydraulic connections ____ pipes and hoses equipped with SAE split-
flange connections
Swing DriveDrive______________________________ Liebherr swash plate motor with inte-
grated brake valveGear ______________________________ Liebherr planetary reduction gearSwing ring______________________ Liebherr, sealed single race ball bearing
swing ring, internal teethSwing speed __________________ 06,2 RPMSwing torque __________________ 156 kNmSwing brake __________________wet discs (spring applied pressure
released)
7/31/2019 Liebherr Excavator
3/10
Dimensions
3
E
D
M N
L
U
Z
H
K
W
X
C
A
B
T
Q
A1
G
F
Tires l 1600 mm, width 600 mm
Industrial sticks
mmA 3000A1 270B 3705C 3970D 3730E 3830H 3650K 1930L 3600M 1800N 1775Q 505T 5690U 7075Z 7230
E = tail radius
With industrial-type straight boom m 8,80 10,30
W mm 3350 3350X mm 13000 14500
Industrial-type stick m 7,00 8,00 9,50
F mm 7300 8300 9800G mm 1300 1300 1300
Dimensions are with attachment over steering axle
7/31/2019 Liebherr Excavator
4/104
Industrial Attachment withIndustrial-Type Straight Boom 8,80 m
Attachment EnvelopeIndustrial-type straight boom pinned in rear bearing ofboom foot bracket1 with industrial stick 7,00 m2 with industrial stick 8,00 m3 with industrial stick 7,00 m and grapple model 72 B4 with industrial stick 8,00 m and grapple model 72 B
Operating Weight
Operating weight includes basic machine and industrialattachment with:
Industrial-type straight boom 8,80 mIndustrial stick 7,00 mGrapple model 72 B/1,40 m3
with 5 semi-closed tines 63000 kg
Industrial-type straight boom 8,80 mIndustrial stick 8,00 mGrapple model 72 B/1,40 m3
with 5 semi-closed tines 63900 kg
0
5
10
15
20
25
30
35
40
45
50
55
-5
-10
-15
-20
-25
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
-1
-2
-3
-4
-5
-6
-7
-8
0123456789101112131415161718
0510152025303540455055
m
ft
-9-30
ft
1
2
3
4
m
7/31/2019 Liebherr Excavator
5/10
Lift Capacities withIndustrial-Type Straight Boom 8,80 m
5
with industrial stick 7,00 mHeight Undercarriage Radius of load from centerline of machine in m
m 3,0 4,5 6,0 7,5 9,0 10,5 12,0 13,5 15,0 16,5 18,0Stabilizers raised
18,0 4 pt. outriggers downStabilizers raised
16,5 4 pt. outriggers downStabilizers raised
15,0 4 pt. outriggers downStabilizers raised
13,5 4 pt. outriggers downStabilizers raised
12,0 4 pt. outriggers downStabilizers raised
10,5 4 pt. outriggers downStabilizers raised
9,0 4 pt. outriggers downStabilizers raised
7,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers downStabilizers raised
4,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers downStabilizers raised
4,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers down
9,8# ( 9,8#)9,8# ( 9,8#)
10,5# (10,5#)10,5# (10,5#)
12,8# (12,8#) 10,2# (10,2#)12,8# (12,8#) 10,2# (10,2#)
12,7# (12,7#) 10,5 (11,5 ) 8,2 ( 9,1 )12,7# (12,7#) 11,7# (11,7#) 9,3# ( 9,3#)
12,7# (12,7#) 10,5 (11,5 ) 8,3 ( 9,1 ) 6,6 ( 7,2#)
12,7# (12,7#) 11,7# (11,7#) 10,8# (10,8#) 7,2# ( 7,2#)13,0# (13,0#) 10,3 (11,3 ) 8,2 ( 9,1 ) 6,6 ( 7,3 )13,0# (13,0#) 11,8# (11,8#) 10,8# (10,8#) 9,8# ( 9,8#)
12,9 (13,5#) 10,1 (11,1 ) 8,1 ( 8,9 ) 6,6 ( 7,3 )13,5# (13,5#) 12,1# (12,1#) 11,0# (11,0#) 10,0# (10,0#)
16,4# (16,4#) 12,4 (13,7 ) 9,7 (10,7 ) 7,8 ( 8,7 ) 6,4 ( 7,1 ) 5,3 (5,9 )16,4# (16,4#) 14,2# (14,2#) 12,5# (12,5#) 11,2# (11,2#) 10,1# (10,1#) 7,9# (7,9#)
28,9# (28,9#) 21,7 (21,7#) 15,5 (17,2 ) 11,8 (13,1 ) 9,3 (10,3 ) 7,6 ( 8,4 ) 6,3 ( 7,0 ) 5,2 (5,8 )28,9# (28,9#) 21,7# (21,7#) 17,6# (17,6#) 14,8# (14,8#) 12,9# (12,9#) 11,4# (11,4#) 10,1# (10,1#) 8 ,8 (8,9#)
25,1# (25,1#) 19,9 (22,4 ) 14,5 (16,2 ) 11,2 (12,4 ) 8,9 ( 9,9 ) 7,3 ( 8,1 ) 6,1 ( 6,8 ) 5,1 (5,7 )25,1# (25,1#) 23,6# (23,6#) 18,6# (18,6#) 15,5# (15,5#) 13,2# (13,2#) 11,5# (11,5#) 10,1# (10,1#) 8 ,7 (8,8#)
10,5# (10,5#) 18,5 (20,9 ) 13,6 (15,3 ) 10,6 (11,8 ) 8,5 ( 9,5 ) 7,1 ( 7,9 ) 5,9 ( 6,6 ) 5,1 (5,6 )10,5# (10,5#) 24,7# (24,7#) 19,3# (19,3#) 15,8# (15,8#) 13,4# (13,4#) 11,5# (11,5#) 10,0# (10,0#) 8,4# (8,4#)
4,4# (4,4#) 9,4# ( 9,4#) 17,5 (19,9 ) 12,9 (14,6 ) 10,1 (11,4 ) 8,2 ( 9,2 ) 6,8 ( 7,6 ) 5,8 ( 6,5 ) 5,0 (5,6 )4,4# (4,4#) 9,4# ( 9,4#) 21,7# (21,7#) 19,3# (19,3#) 15,8# (15,8#) 13,3# (13,3#) 11,3# (11,3#) 9,6# ( 9,6#) 7,8# (7,8#)
10,2# (10,2#) 17,0 (18,8#) 12,5 (14,2 ) 9 ,8 (11,0 ) 8,0 ( 9 ,0 ) 6 ,7 ( 7,5 ) 5 ,7 ( 6,4 )10,2# (10,2#) 18,8# (18,8#) 18,6# (18,6#) 15,2# (15,2#) 12,8# (12,8#) 10,7# (10,7#) 8,9# ( 8,9#)
16,8 (18,8#) 12,3 (13,9 ) 9,7 (10,9 ) 7,9 ( 8,9 ) 6,6 ( 7,4 )18,8# (18,8#) 17,0# (17,0#) 14,1# (14,1#) 11,7# (11,7#) 9,7# ( 9,7#)
with industrial stick 8,00 mHeight Undercarriage Radius of load from centerline of machine in m
m 3,0 4,5 6,0 7,5 9,0 10,5 12,0 13,5 15,0 16,5 18,0Stabilizers raised
18,0 4 pt. outriggers downStabilizers raised
16,5 4 pt. outriggers downStabilizers raised
15,0 4 pt. outriggers downStabilizers raised
13,5 4 pt. outriggers downStabilizers raised
12,0 4 pt. outriggers down
Stabilizers raised10,5 4 pt. outriggers downStabilizers raised
9,0 4 pt. outriggers downStabilizers raised
7,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers downStabilizers raised
4,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers down
Stabilizers raised 4,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers down
8,1# ( 8,1#)8,1# ( 8,1#)
8,1# ( 8,1#)8,1# ( 8,1#)
10,1# (10,1#) 7,6# ( 7,6#)10,1# (10,1#) 7,6# ( 7,6#)
10,5# (10,5#) 8,3 ( 9,1 ) 6,4# (6,4#)10,5# (10,5#) 9,5# ( 9,5#) 6,4# (6,4#)
10,5# (10,5#) 8,3 ( 9,1 ) 6 ,6 (7,3 )10,5# (10,5#) 9,8# ( 9,8#) 8,5# (8,5#)
10,3 (10,7#) 8,2 ( 9,0 ) 6,5 (7,2 ) 5,3 (5,9 )10,7# (10,7#) 9,8# ( 9,8#) 9,1# (9,1#) 6,4# (6,4#)
12,2# (12,2#) 10,1 (11,0#) 8,0 ( 8,8 ) 6,4 (7,1 ) 5,2 (5,8 )12,2# (12,2#) 11,0# (11,0#) 10,0# (10,0#) 9,2# (9,2#) 8,0# (8,0#)
12,5 (12,9#) 9 ,7 (10,7 ) 7,7 ( 8 ,6 ) 6 ,3 (7,0 ) 5 ,1 (5,7 )12,9# (12,9#) 11,5# (11,5#) 10,3# (10,3#) 9,3# (9,3#) 8,5# (8,5#)
19,5# (19,5#) 15,9 (16,1#) 11,9 (13,2 ) 9,3 (10,3 ) 7,5 ( 8,3 ) 6 ,1 (6 ,8 ) 5 ,0 (5,6 )19,5# (19,5#) 16,1# (16,1#) 13,7# (13,7#) 12,0# (12,0#) 10,6# (10,6#) 9,5# (9,5#) 8,5# (8,5#)
29,8# (29,8#) 20,7 (21,9#) 14,8 (16,5 ) 11,2 (12,5 ) 8,9 ( 9,9 ) 7 ,2 ( 8 ,0 ) 5 ,9 (6,6 ) 4 ,9 (5,5 ) 4 ,1 (4,6 )29,8# (29,8#) 21,9# (21,9#) 17,4# (17,4#) 14,5# (14,5#) 12,4# (12,4#) 10,9# (10,9#) 9,6# (9,6#) 8,4 (8,4#) 5,2# (5,2#)
4,1# (4,1#) 17,0# (17,0#) 19,0 (21,5 ) 13,8 (15,5 ) 10,6 (11,9 ) 8,4 ( 9,4 ) 6,9 ( 7,7 ) 5,7 (6,4 ) 4,8 (5,4 )4,1# (4,1#) 17,0# (17,0#) 23,6# (23,6#) 18,4# (18,4#) 15,1# (15,1#) 12,8# (12,8#) 11,0# (11,0#) 9,6# (9,6#) 8,3 (8,3#)
4,3# (4,3#) 10,6# (10,6#) 17,8 (20,2 ) 13,0 (14,7 ) 10,1 (11,3 ) 8,1 ( 9,1 ) 6,6 ( 7,4 ) 5,5 (6,2 ) 4,7 (5,3 )4,3# (4,3#) 10,6# (10,6#) 24,3# (24,3#) 18,9# (18,9#) 15,4# (15,4#) 12,9# (12,9#) 11,0# (11,0#) 9,4# (9,4#) 8,0# (8,0#)
5,6# (5,6#) 10,0# (10,0#) 17,0 (19,4 ) 12,5 (14,1 ) 9,7 (10,9 ) 7,8 ( 8,8 ) 6,4 ( 7,2 ) 5,4 (6,1 ) 4,6 (5,2 )5,6# (5,6#) 10,0# (10,0#) 20,4# (20,4#) 18,7# (18,7#) 15,2# (15,2#) 12,7# (12,7#) 10,7# (10,7#) 9,0# (9,0#) 7,3# (7,3#)
10,7# (10,7#) 16,6 (18,5#) 12,1 (13,7 ) 9,4 (10,6 ) 7,6 ( 8,6 ) 6,3 ( 7,1 ) 5,3 (6,0 )10,7# (10,7#) 18,5# (18,5#) 17,7# (17,7#) 14,5# (14,5#) 12,0# (12,0#) 10,0# (10,0#) 8,2# (8,2#)
16,5 (18,7#) 12,0 (13,6 ) 9,3 (10,5 ) 7,5 ( 8,5 ) 6,3 ( 7,1 )18,7# (18,7#) 15,9# (15,9#) 13,1# (13,1#) 10,8# (10,8#) 8,8# ( 8,8#)
The lift capacities are stated in metric tonnes (t) on the lifting gears stick tip, and can be lifted 360h on firm, level support-ing surface with blocked oscillating axle.Capacities shown in brackets are valid when the undercarriage is in longitudinal position and are established over thesteering axle (travel position) with stabilizers raised, and over rigid axle with stabilizers down.Indicated loads are based on ISO 10567 standard and do not exceed 75% of tipping or 87 % of hydraulic capacity (#).Lift capacities do not include the weight of a grapple, clamshells, magnet or other lifting devices, which must be deductedfrom the above figures.According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overloadwarning device and automatic check valves on the hoist cylinders, when they are used for lifting operations which requirethe use of lifting accessories.
7/31/2019 Liebherr Excavator
6/106
Attachment EnvelopeIndustrial-type straight boom pinned in rear bearing ofboom foot bracket1 with industrial stick 8,00 m2 with industrial stick 9,50 m3 with industrial stick 8,00 m and grapple model 72 B4 with industrial stick 9,50 m and grapple model 72 B
Operating WeightOperating weight includes basic machine and industrialattachment with:
Industrial-type straight boom 10,30 m
Industrial stick 8,00 mGrapple model 72 B/1,40 m3
with 5 semi-closed tinesHydraulical cab elevationPiston rod protection 68200 kg
Industrial-type straight boom 10,30 mIndustrial stick 9,50 mGrapple model 72 B/1,40 m3
with 5 semi-closed tinesHydraulical cab elevationPiston rod protection 68500 kg
0 m0 m2468101214161820
0 ft102030405060
00
-2
-4
-6
-8
-10
2
4
6
8
10
12
14
16
18
20
m
0
-10
-20
-30
10
20
30
40
50
60
ft
70
1
2
3
4
Industrial Attachment withIndustrial-Type Straight Boom 10,30 m
7/31/2019 Liebherr Excavator
7/107
Lift Capacities withIndustrial-Type Straight Boom 10,30 m
with industrial stick 8,00 mHeight Undercarriage Radius of load from centerline of machine in m
m 3,0 4,5 6,0 7,5 9,0 10,5 12,0 13,5 15,0 16,5 18,0Stabilizers raised
18,0 4 pt. outriggers downStabilizers raised
16,5 4 pt. outriggers downStabilizers raised
15,0 4 pt. outriggers downStabilizers raised
13,5 4 pt. outriggers downStabilizers raised
12,0 4 pt. outriggers downStabilizers raised
10,5 4 pt. outriggers downStabilizers raised
9,0 4 pt. outriggers downStabilizers raised
7,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers downStabilizers raised
4,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers downStabilizers raised
4,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers down
8,8# ( 8,8#)8,8# ( 8,8#)
8,9# ( 8,9#)8,9# ( 8,9#)
9,8# ( 9,8#) 8,0 ( 8,6#)9,8# ( 9,8#) 8,6# ( 8,6#)
9,7# ( 9,7#) 8,1 ( 8,9#) 6 ,3 (7,1 )9,7# ( 9,7#) 8,9# ( 8,9#) 8,0# (8,0#)
9,7# ( 9,7#) 8,1 ( 8,9#) 6,4 ( 7,1 ) 5,0 ( 5,7 )9,7# ( 9,7#) 8,9# ( 8,9#) 8,1# (8,1#) 6,8# (6,8#)
9,9# ( 9,9#) 8,0 ( 8,8 ) 6,3 (7,0 ) 5,1 (5,7 )
9,9# ( 9,9#) 8,9# ( 8,9#) 8,1# (8,1#) 7,5# (7,5#)9,9 (10,1#) 7,8 ( 8,6 ) 6,2 ( 6,9 ) 5,0 ( 5,6 ) 4,0 ( 4,5 )
10,1# (10,1#) 9,1# ( 9,1#) 8,2# (8,2#) 7,5# (7,5#) 6,5# (6,5#)
11,9# (11,9#) 9,5 (10,4#) 7,5 ( 8,3 ) 6,0 ( 6,7 ) 4,9 ( 5,5 ) 4,0 ( 4,5 )11,9# (11,9#) 10,4# (10,4#) 9,3# ( 9,3#) 8,3# (8,3#) 7,5# (7,5#) 6,8# (6,8#)
18,3# (18,3#) 14,9# (14,9#) 11,6 (12,5#) 9 ,0 (10,0 ) 7,2 ( 8 ,0 ) 5 ,8 (6,5 ) 4 ,7 (5,3 ) 3 ,9 (4,4 )18,3# (18,3#) 14,9# (14,9#) 12,5# (12,5#) 10,8# (10,8#) 9,5# ( 9,5#) 8,5# (8,5#) 7,6# (7,6#) 6,8# (6,8#)
27,6# (27,6#) 20,1 (20,1#) 14,3 (15,9#) 10,8 (12,1 ) 8,5 ( 9 ,5 ) 6,8 ( 7 ,6 ) 5 ,5 (6,2 ) 4 ,5 (5,2 ) 3 ,8 (4,3 )27,6# (27,6#) 20,1# (20,1#) 15,9# (15,9#) 13,1# (13,1#) 11,2# (11,2#) 9,7# ( 9,7#) 8,6# (8,6#) 7,6# (7,6#) 6,8# (6,8#)
7,6# ( 7,6#) 17,9 (20,4 ) 13,0 (14,7 ) 10,0 (11,3 ) 7,9 ( 8,9 ) 6,4 ( 7,2 ) 5,3 (6,0 ) 4 ,4 (5,0 ) 3 ,6 (4,2 ) 3 ,1 (3,5 )7,6# ( 7,6#) 21,6# (21,6#) 16,7# (16,7#) 13,6# (13,6#) 11,5# (11,5#) 9,9# ( 9,9#) 8,7# (8,7#) 7,6# (7,6#) 6,7# (6,7#) 5,1# (5,1#)
4,5# ( 4,5#) 14,4# (14,4#) 12,0 (13,6 ) 9 ,3 (10,5 ) 7,5 ( 8 ,4 ) 6 ,1 ( 6 ,9 ) 5 ,0 (5,7 ) 4 ,2 (4,8 ) 3 ,5 (4,1 )4,5# ( 4,5#) 14,4# (14,4#) 17,2# (17,2#) 13,9# (13,9#) 11,7# (11,7#) 10,0# (10,0#) 8,6# (8,6#) 7,5# (7,5#) 6,5# (6,5#)
1,7# (1,7#) 4,7# ( 4,7#) 10,7# (10,7#) 11,2 (12,9 ) 8 ,8 (10,0 ) 7,1 ( 8 ,0 ) 5 ,8 ( 6 ,6 ) 4 ,8 (5,5 ) 4 ,1 (4,7 ) 3 ,5 (4,0 )1,7# (1,7#) 4,7# ( 4,7#) 10,7# (10,7#) 17,1# (17,1#) 13,9# (13,9#) 11,6# (11,6#) 9,9# ( 9,9#) 8,5# (8,5#) 7,3# (7,3#) 6,2# (6,2#)
5,6# ( 5,6#) 10,2# (10,2#) 10,8 (12,4 ) 8 ,4 ( 9 ,6 ) 6,8 ( 7 ,7 ) 5,6 ( 6 ,4 ) 4 ,7 (5,4 ) 4 ,0 (4,6 ) 3 ,4 (3,9 )5,6# ( 5,6#) 10,2# (10,2#) 16,5# (16,5#) 13,5# (13,5#) 11,3# (11,3#) 9,6# ( 9,6#) 8,2# (8,2#) 6,9# (6,9#) 5,6# (5,6#)
10,7# (10,7#) 10,5 (12,1 ) 8 ,2 ( 9 ,4 ) 6,6 ( 7,6 ) 5,5 ( 6,3 ) 4 ,6 (5,3 ) 3 ,9 (4,5 )10,7# (10,7#) 15,3# (15,3#) 12,7# (12,7#) 10,7# (10,7#) 9,0# ( 9,0#) 7,6# (7,6#) 6,3# (6,3#)
10,5 (12,1 ) 8,1 ( 9,3 ) 6,5 ( 7,5 ) 5,4 ( 6,2 ) 4,6 (5,3 )
13,5# (13,5#) 11,4# (11,4#) 9,6# ( 9,6#) 8,1# ( 8,1#) 6,7# (6,7#)
with industrial stick 9,50 mHeight Undercarriage Radius of load from centerline of machine in m
m 3,0 4,5 6,0 7,5 9,0 10,5 12,0 13,5 15,0 16,5 18,0Stabilizers raised
18,0 4 pt. outriggers downStabilizers raised
16,5 4 pt. outriggers downStabilizers raised
15,0 4 pt. outriggers downStabilizers raised
13,5 4 pt. outriggers downStabilizers raised
12,0 4 pt. outriggers down
Stabilizers raised10,5 4 pt. outriggers downStabilizers raised
9,0 4 pt. outriggers downStabilizers raised
7,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers downStabilizers raised
4,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
0 4 pt. outriggers downStabilizers raised
1,5 4 pt. outriggers downStabilizers raised
3,0 4 pt. outriggers down
Stabilizers raised 4,5 4 pt. outriggers downStabilizers raised
6,0 4 pt. outriggers down
4,7# (4,7#)4,7# (4,7#)
6,6# (6,6#) 4,5# (4,5#)6,6# (6,6#) 4,5# (4,5#)
7,4# (7,4#) 6,1 (6,2#) 3,9# (3,9#)7,4# (7,4#) 6,2# (6,2#) 3,9# (3,9#)
7,3# (7,3#) 6,2 (6,8#) 4,8 (5,5 )7,3# (7,3#) 6,8# (6,8#) 5,6# (5,6#)
7,3# (7,3#) 6,2 (6,8#) 4,9 (5,5 ) 3,8 (4,3 )7,3# (7,3#) 6,8# (6,8#) 6,3# (6,3#) 4,6# (4,6#)
7,4# (7,4#) 6,1 (6,8 ) 4,8 (5,4 ) 3,8 (4,3 )7,4# (7,4#) 6,8# (6,8#) 6,3# (6,3#) 5,8# (5,8#)
7,6 (7,6#) 6,0 (6,7 ) 4,7 (5,3 ) 3,7 (4,3 ) 2,9 (3,4 )7,6# (7,6#) 6,9# (6,9#) 6,4# (6,4#) 5,9# (5,9#) 4,1# (4,1#)
8,8# ( 8,8#) 7 ,3 (7,9#) 5,8 (6,5 ) 4,6 (5,2 ) 3,7 (4,2 ) 2,9 (3,4 )8,8# ( 8,8#) 7,9# (7,9#) 7,1# (7,1#) 6,5# (6,5#) 5,9# (5,9#) 5,1# (5,1#)
10,7# (10,7#) 9,0 ( 9,3#) 7,0 (7,8 ) 5,6 ( 6,3 ) 4,4 ( 5,0 ) 3,6 ( 4,1 ) 2,8 ( 3,3 )10,7# (10,7#) 9,3# ( 9,3#) 8,3# (8,3#) 7,4# (7,4#) 6,6# (6,6#) 6,0# (6,0#) 5,3# (5,3#)
13,8# (13,8#) 11,1 (11,6#) 8,5 ( 9,5 ) 6,7 (7,5 ) 5,3 ( 6,0 ) 4,3 ( 4,9 ) 3,4 ( 4,0 ) 2,8 ( 3,2 )13,8# (13,8#) 11,6# (11,6#) 9,9# ( 9,9#) 8,6# (8,6#) 7,6# (7,6#) 6,8# (6,8#) 6,0# (6,0#) 5,3# (5,3#)
27,2# (27,2#) 19,5# (19,5#) 13,8 (15,2#) 10,3 (11,6 ) 8,0 ( 9 ,0 ) 6,3 (7 ,1 ) 5 ,0 (5,7 ) 4 ,1 (4,7 ) 3 ,3 (3,8 ) 2 ,7 (3,1 )27,2# (27,2#) 19,5# (19,5#) 15,2# (15,2#) 12,4# (12,4#) 10,4# (10,4#) 9,0# (9,0#) 7,8# (7,8#) 6,9# (6,9#) 6,1# (6,1#) 5,3# (5,3#)
8,7# ( 8,7#) 17,7 (20,2 ) 12,7 (14,4 ) 9 ,6 (10,8 ) 7,5 ( 8 ,5 ) 6,0 (6,8 ) 4,8 (5,5 ) 3 ,9 (4,5 ) 3 ,2 (3,7 ) 2 ,6 (3,1 )8,7# ( 8,7#) 21,3# (21,3#) 16,3# (16,3#) 13,1# (13,1#) 10,9# (10,9#) 9,3# (9,3#) 8,0# (8,0#) 6,9# (6,9#) 6,0# (6,0#) 5,2# (5,2#)
1,3# (1,3#) 5,3# ( 5,3#) 15,0# (15,0#) 11,8 (13,4 ) 9 ,0 (10,2 ) 7,1 ( 8 ,0 ) 5,6 (6 ,5 ) 4 ,6 (5,3 ) 3 ,7 (4,3 ) 3 ,1 (3,6 ) 2 ,5 (3,0 )1,3# (1,3#) 5,3# ( 5,3#) 15,0# (15,0#) 16,9# (16,9#) 13,5# (13,5#) 11,1# (11,1#) 9,4# (9,4#) 8,0# (8,0#) 6,9# (6,9#) 5,9# (5,9#) 4,9# (4,9#)
2,2# (2,2#) 5,1# ( 5,1#) 10,9# (10,9#) 11,2 (12,8 ) 8 ,5 ( 9 ,7 ) 6,7 ( 7 ,7 ) 5,4 (6 ,2 ) 4,4 (5 ,1 ) 3 ,6 (4,2 ) 3 ,0 (3,5 ) 2 ,5 (2,9 )2,2# (2,2#) 5,1# ( 5,1#) 10,9# (10,9#) 17,0# (17,0#) 13,6# (13,6#) 11,2# (11,2#) 9,4# (9,4#) 7,9# (7,9#) 6,8# (6,8#) 5,7# (5,7#) 4,6# (4,6#)
3,3# (3,3#) 5,6# ( 5,6#) 10,1# (10,1#) 10,8 (12,4 ) 8 ,2 ( 9 ,4 ) 6,5 ( 7 ,4 ) 5,2 (6 ,0 ) 4,3 (4 ,9 ) 3 ,5 (4,1 ) 2 ,9 (3,4 ) 2 ,5 (2,9 )3,3# (3,3#) 5,6# ( 5,6#) 10,1# (10,1#) 16,5# (16,5#) 13,3# (13,3#) 10,9# (10,9#) 9,1# (9,1#) 7,7# (7,7#) 6,4# (6,4#) 5,2# (5,2#) 3,9# (3,9#)
6,5# ( 6,5#) 10,2# (10,2#) 10,6 (12,2 ) 8 ,0 ( 9,2 ) 6,3 ( 7 ,3 ) 5,1 (5,9 ) 4 ,2 (4,9 ) 3 ,5 (4 ,1 ) 2 ,9 (3 ,4 )6,5# ( 6,5#) 10,2# (10,2#) 15,4# (15,4#) 12,5# (12,5#) 10,3# (10,3#) 8,6# (8,6#) 7,1# (7,1#) 5,8# (5,8#) 4,5# (4,5#)
10,5 (12,1 ) 8 ,0 ( 9 ,2 ) 6,3 ( 7,2 ) 5,1 (5,9 ) 4 ,2 (4,8 )13,6# (13,6#) 11,2# (11,2#) 9,3# ( 9,3#) 7,6# (7,6#) 6,2# (6,2#)
The lift capacities are stated in metric tonnes (t) on the lifting gears stick tip, and can be lifted 360h on firm, level support-ing surface with blocked oscillating axle.Capacities shown in brackets are valid when the undercarriage is in longitudinal position and are established over thesteering axle (travel position) with stabilizers raised, and over rigid axle with stabilizers down.Indicated loads are based on ISO 10567 standard and do not exceed 75% of tipping or 87 % of hydraulic capacity (#).Lift capacities do not include the weight of a grapple, clamshells, magnet or other lifting devices, which must be deductedfrom the above figures.According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overloadwarning device and automatic check valves on the hoist cylinders, when they are used for lifting operations which requirethe use of lifting accessories.
7/31/2019 Liebherr Excavator
8/108
Choice of Cab Elevationsand Cab Protections
D
CB
A
D1
C2B2
C1B1
E
D2
Rigid Cab ElevationHeight 1200 mm 2000 mm
A 4285 mm 5085 mmB 4620 mm 5420 mmC 5150 mm 5950 mmD 665 mm 665 mm
Weight 600 kg 830 kg
A rigid cab elevation has a fixed eye level height.For a lower transport height the shell of the cab can beremoved. The overall height is then dimension A.
Hydraulical Cab ElevationParallelogram + distance piece 0,5 mB1 3930 mmB2 7500 mmC1 4467 mm
C2 8037 mmD1 2660 mmD2 2800 mmE 4480 mm
Weight adjustment device 1870 kg
The parallelogram cab raiser allows the operator to choosehis eye level between dimensions B1 and B2.
Cab guard for cab Grille above Grilles in front
7/31/2019 Liebherr Excavator
9/10
Variety of Tools
Shells for loose material
Multiple Tine Grapples
Crane Hook
Electric Magnet
Shells for loose materialwith cutting edge,
without teeth
Cutting width of shells mm 1500 1500
Capacity m3 1,85 2,20
For loose material,specific weight up to t/m3 1,5 1,2
Total weight kg 2290 2340
Grapple model 72 B with 4 tinesopen semi-closed closedtines tines tines
Capacity m3 1,20 1,40 1,60 1,20 1,40 1,60 1,20 1,40 1,60
Total weight kg 1930 1945 1965 2130 2170 2190 2390 2450 2490
Grapple model 72 B with 5 tinesopen semi-closed closedtines tines tines
Capacity m3 1,20 1,40 1,60 1,20 1,40 1,60 1,20 1,40 1,60
Total weight kg 2380 2410 2430 2650 2690 2720 2970 3050 3100
Crane hook with suspension
Max. load t 12,5Height with suspension mm 1250
Total weight kg 265
Electro magnets with suspensionMagnet information on request
9
Clamshell model 22
7/31/2019 Liebherr Excavator
10/10
LIEBHERR-HYDRAULIKBAGGER GMBH, D-88457 Kirchdorf/Iller, (073 54) 80-0, Fax (073 54) 80-7294www.liebherr.com, E-Mail: [email protected]
With compliments:
LHB/VF8420775-2-10.0
2
PrintedinGermanybyE
berl.
Illustrationsanddatamaydifferfroms
tandardeq
uipment.Subjecttochangewithoutnotice.
Options and/or special attachments, supplied by vendors other than Liebherr, are only to beinstalled with the knowledge and approval of Liebherr.
UndercarriageStandard Optional
Two circuit travel brake with accumulator x
Travel motor protection
Outrigger zylinder rod guards x
Creeper speed electrically switchable from cab x
New tires x
Service free parking brake x
Independent outrigger control x
Choice of tires x
Auto check valve directly on each stabilizer cylinder x
Proportional power steering with mechanical
back up x
Customized colors xLockable storage box x
Lockable storage box additional x
Two-speed power shift transmission x
UppercarriageElectric fuel tank filler pump x
Maintenance-free swing brake lock x
Handrails, Non slip surfaces x
Main switch for electric circuit x
Engine hood with lift help x
Pedal controlled positioning swing brake x
Reverse travel warning system x
Sound insulation x
Customized colors xPin lock upper/lower x
Maintenance-free HD-batteries x
Extended tool kit x
Lockable tool box x
Tool kit x
Operators cabStandard Optional
Storage tray x
Displays for engine operating condition x
Mechanical hour meters, readable from outside
the cab x
Roof hatch
All-round adjustable roof vent x
6-way adjustable seat x
Airpressure operator seat with heating and
head-rest x
Seat and consoles independently adjustable x
Extinguisher x
Removable customized foot mat xDome light x
Inside rear mirror x
Hydraulical cab elevation x
Rigid cab elevation x
Cab heater with defroster
Cloth hook x
Air conditioning x
Electric cool box x
Steering wheel adjustable x
Bullet proof window
(fixed installation can not be opened) x
Stereo radio x
Preparation for radio installation x
Rain hood over front window opening x
Beacon x
All tinted windows x
Door with sliding window x
Optical and acoustical warning if outriggers are
not fully retracted x
Auxiliary heating x
Sun shade x
Sun roller blind
Electronic drive away lock x
Wiper/washer x
Cigarette lighter and ashtray x
Additional flood lights x
AttachmentFlood lights on boom x
Hydr. lines for clam operation on stick x
Industrial-type gooseneck sticks with remote
hydraulic pin puller x
Sealed pivots x
Safety lift hook x
Liebherr line of clams x
Safety check valves on hoist cylinder x
Safety check valves on stick cylinder x
SAE-dbl flange connection for all hi-pressure lines x
Hose quick connection x
Centralized lube points x
Manual quick change tool adapter x
Customized colors x
Special buckets and other tools
Overload warning device xTwo way valves for bucket/clam use
Locking of connections for clam operation
Cylinders with shock absorber x
HydraulicsHydraulic tank shut-off valve x
Extra hydr. control for hydr. swivel x
Pressure compensation x
Hook up for pressure checks x
Pressure storage for controlled lowering of
attachments with engine turned off xFilter with partial micro filteration (5 mm) x
Electronic pump regulation x
Stepless mode system (ECO) x
Flow compensation x
Four mixed modes, can also be adjusted x
Full flow micro filtration x
Bio degradable hydraulic oil x
Pressure compensation
Flow summation x
Additional hydraulic circuits x
EngineTurbo charger x
Direct injection xCold start aid x
Sensor controlled engine idling x
Air filter with pre-cleaner main- and safety element x