STEIGER® T 380 AE
600 kg
320 kg100 kg
600
kg320
kg
100
kg
600
kg320
kg
600 kg
320 kg100 kg
100
kg
31 m
31 m31 m31
m
600 kg
320 kg100 kg
600
kg320
kg
100
kg
600
kg320
kg
600 kg
320 kg100 kg
100
kg
31 m
31 m31 m31
m
Ultra-modern aerial platform access technology is required in order to repair, care and maintain today’s modern aircraft, including the A380. The work needs to be carried out in a safe, fast and cost-effective manner. Only the RUTHMANNSTEIGER® T 380 AE (airline equipment) is able to fulfil all these requirements.
STEIGER® T 380 AE: SPECIAL DESIGN FOR AIRBUS A380more information: www.ruthmann.de/airport-steiger
STEIGER® T 380 AE
All measurements and weights are approximate and refer to the standard basic execution. Technical alterations reserved. STEigER®, gElENkSTEigER®, RüSSEl® and CARgoloAdER® are registered trademarks of RUTHMANN gmbH & Co. kg
Ruthmann gmbH & Co. kgP.O. Box 1263 - 48705 Gescher-Hochmoor - GERMANY Fon: +49 2863 204-0 - Fax: +49 2863 204-212 Internet: www.ruthmann.de - E-Mail: [email protected]
Valid
fro
m: 0
2/20
14
prod
uktd
aten
blat
t_T3
80_A
E.in
dd
RUTHMANNSTEIGER® T 380 AE
Working height
38.00 m Total height ≤ 3.95 m
Lifting height
36.00 m Total length 9.76 m
Outreach* 31.00 mPermissible inclination
2°
Working cage size
2.42 x 0.97 m
Permissible total weight ≥
18,000 kg
Max. working cage size
3.82 x 0.97 m
Range of rotation 500 °
Working cage load
600 kgSwivelling angle
of the jib/RÜSSEL®180°
* depending on load, angle of rotation and outfit
Swivelling angle of upper boom
180°
xx,xxx t
operating Range:Once the unit is properly positioned, the T 380 demonstrates a perfect operating range. Starting from a preset position, the entire vertical/horizontal tail section on both sides, the greater part of the wings and parts of the fuselage (see picture below) can be reached.
Working Cage:The optimized aluminium working cage is standard equipment. This telescoping and extremely agile cage accommodate up to 5 mechanics plus tools (600 kg max. load capacity).
Flexibility:The T 380 is a aerial platform with a movable jib (RÜSSEL®) at the end of its telescoping boom system. This feature allows work to be carried out on both sides of the aircraft, without constantly moving the aerial platform. The extent of needed movements is very limited because of the amazing operating range of the jib (RÜSSEL®) . This greatly increases the very important level of safety.
Capability and Technology:The „Lift-Up System“, mounted at the working cage, is equipped to tackle any job that comes its way, without costly set-up time. No additional equipment (forklift etc.) is needed in order to drop off or pick up material.
Working Height:The height of the Airbus A380 is 24.1 metres which means that the T 380, with its 38-metre maximum working height and incredible outreach of 31 metres, is able to service the A 380 with ease.