View
23
Download
0
Category
Preview:
Citation preview
modulbox HC2 modulbox HC2
Branding AnleitungBranding manual
2
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Übersicht von branding FlächeBranding surfaces overview
Klickbare SymboleClickable symbols
3
Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
modulbox HC2
3-parts door panelSize (WxH):1764 mm x 645 mm
Flächentyp
1Surface type
1.1Inneninside
1.7Inneninside
1.2Inneninside 1.8
Inneninside1.3
Inneninside
1.9Inneninside
1.4Inneninside
1.5Inneninside
1.6Inneninside
1.7Aussenoutside
1.1Aussenoutside
1.2Aussenoutside
1.3Aussenoutside
1.4Aussenoutside
1.6Aussenoutside
1.5Aussenoutside
1.8Aussenoutside
1.9Aussenoutside
1.1Inneninside
1.1Aussenoutside
/ 1.4Inneninside
1.4Aussenoutside
/ 1.7Inneninside
1.7Aussenoutside
/
1.2Inneninside
1.2Aussenoutside
/ 1.5Inneninside
1.5Aussenoutside
/ 1.8Inneninside
1.8Aussenoutside
/
1.3Inneninside
1.3Aussenoutside
/ 1.6Inneninside
1.6Aussenoutside
/ 1.9Inneninside
1.9Aussenoutside
/
ca. 244 mm ca. 244 mm
ca. 83 mm ca. 45 mm
ca. 45 mm
modulbox Boden/Plattformenmodulbox floor/platforms
1764 mm
645 mm
Ansicht ViewAnsicht View
Türpaneel 3-teiligGröße (BxH)1764 mm x 645 mm
Zurück zur ÜbersichtBack to Overview
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
Achtung:Warning:
Eine Breite am Rand des Panels von ca. 15 mm umlaufend ist von Paneel Befestigungs-leisten verdeckt.
A width of about 15 mm from the edge all around the panel is ob-scured by panel moun-ting strips.
4
Flächentyp
XSurface type
Ansicht ViewAnsicht View
Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox HC2
XXX
XXX
- Größe (BxH):- size (WxH):
XX mm x XX mm
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
modulbox HC2
3-parts door panelSize (WxH):1764 mm x 645 mm
Flächentyp
1Surface type
1764 mm
1080 mm342 mm 342 mm
645 mm
Ansicht ViewAnsicht View
Türpaneel 3-teiligGröße (BxH)1764 mm x 645 mm
Verdeckte Fläche vom Bildschirm (40-46 Zoll)Größe (BxH)1080 mm x 645 mm
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
Surface obstructed by Flatscreen (40-46 inch)Size (WxH):1080 mm x 645 mm
Verdeckte Fläche vom Bildschirm
Surface obstructed by Flatscreen
1.4Inneninside
1.4Inneninside
Zur ÜbersichtTo overview
5
Technische DetailsTechnical details
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Zur ÜbersichtTo overview
modulbox HC2
Full size door paneelSize (WxH):1780 mm x 2067 mm
Flächentyp
2Surface type
2.1Inneninside
2.1Inneninside
2.1Aussenoutside
2.1Aussenoutside
/ 2.2Inneninside
2.2Inneninside
2.2Aussenoutside
2.2Aussenoutside
/ 2.3Inneninside
2.3Inneninside
2.3Aussenoutside
2.3Aussenoutside
/
ca. 226 mm
ca. 70mm
modulbox Boden/Plattformenmodulbox floor/platforms
ca. 226 mm1780 mm
2067 mm
Ansicht ViewAnsicht View
TürpaneelvollflächigGröße (BxH)1780 mm x 2067 mm
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
6
Technische DetailsTechnical details
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Zur ÜbersichtTo overview
modulbox HC2
Full size door textile surfaceSize (WxH):1780 mm x 2063 mm
Flächentyp
37Surface type
37.1Inneninside
37.1Inneninside
37.1Aussenoutside
37.1Aussenoutside
/ 37.2Inneninside
37.2Inneninside
37.2Aussenoutside
37.2Aussenoutside
/ 37.3Inneninside
37.3Inneninside
37.3Aussenoutside
37.3Aussenoutside
/
ca. 226 mm
ca. 70mm
modulbox Boden/Plattformenmodulbox floor/platforms
ca. 226 mm1780 mm
2063 mm
Ansicht ViewAnsicht View
Tür Flachkeder-grafik (Textil)Größe (BxH)1780 mm x 2063 mm
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
20 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
20 mm trimming and cut marks are
required for all print-data.
7
Flächentyp
XSurface type
Ansicht ViewAnsicht View
Technische DetailsTechnical details
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
modulbox HC2
Full size door paneelSize (WxH):1780 mm x 2067 mm
Flächentyp
2Surface type
Ansicht ViewAnsicht View
TürpaneelvollflächigGröße (BxH)1780 mm x 2067 mm
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
Zur ÜbersichtTo overview
1780 mm
50 m
m
2067 mm
Verdeckte Fläche vom Bildschirm 40 Zoll:Surface obstructed by Flatscreen 40 inch:
1000 mm x 620 mm
Verdeckte Fläche vom Bildschirm 46 Zoll:Surface obstructed by Flatscreen 46 inch :
1110 mm x 680 mm
Verdeckte Fläche vom Bildschirm 49 Zoll:Surface obstructed by Flatscreen 49 inch:
1150 mm x 700 mm
Bildschirm zentriert imoberen Drittel des Paneels
Flatscreen centred inup third part of the panel
Verdeckte Fläche vom BildschirmTyp ca. Größe (BxH)40“ 1000 mm x 620 mm46“ 1110 mm x 680 mm49“ 1150 mm x 700 mm
Surface obstructed by Flatscreen:40“=1000 mm x 620 mm46“=1110 mm x 680 mm49“=1150 mm x 700 mm
8
Ansicht ViewAnsicht View
Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Flächentyp
26Surface type
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
26-A.1
26-I.1
26-I.2
26-I.3
26-A.2 26-A.3
Box in Box Standard
Panels surfacesSize (WxH):panel (26-A.1, 26-A.3, 26-I.1, 26-I.3)1848 mm x 2035 mmpanel (26-A.2, 26-I.2)1705 mm x 2035 mm
PaneelflächeNr. Größe (BxH)26-A.1
1848 mm x 2035 mm
26-A.326-I.126-I.326-A.2 1705 mm x
2035 mm26-I.2
Ansicht View
Achtung:Warning:
Eine Breite am Rand der Paneel Fläche von ca. 15 mm umlaufend ist von Paneel Befesti-gungsleisten verdeckt.
A width of about 15 mm from the edge all around the panel sur-face is obscured by pa-nel mounting strips.
1848 mm 1705 mm 1848 mm
2035
mm
2035
mm
2035
mm
/26-A.1 26-I.1 /26-A.2 26-I.2 /26-A.3 26-I.3
ca.65 mm
modulbox Boden/Plattformenmodulbox floor/platforms
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
9
Ansicht View
Flächentyp
XSurface type
Ansicht View Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
modulbox HC2
Flächentyp
12Surface type
Ansicht View
Ansicht View
12Aussenoutside
12Aussenoutside
9Inneninside
9Aussenoutside
/
2250
mm
1760 mm
1730 mm
440 mm
880 mm
1320 mm
1880 mm
1410 mm
1850 mm
940 mm
470 mm
ca. 30 mm
ca. 30 mm
Öse auf der Plane genaumittig positioniertHookeye is exactly cen-trally positioned
Öse auf der Plane genaumittig positioniertHookeye is exactly cen-trally positioned
Rain coverSize (WxH):1880 mm x 2250 mm
Branding Tipp:Branding tip:
Bitte legen Sie eine Stanze in überdrucken-der Sonderfarbe an, die die Trapezform zeigt (Breite oben 1880 mm, Breite unten 1760 mm)
Please create a punch in overprinting spot color that shows the trapezo-idal shape (width above 1880 mm, width 1760 mm below)
WetterschutzplaneGröße (BxH)1880 mm x 2250 mm
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
6 mm
Beschnittzugabe mit
Schnittmarken bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
10
Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Flächentyp
9Surface type
Ansicht ViewAnsicht View
Roof cube tarpaulinSize (WxH):1700 mm x 1570 mm
Branding Tipp:Branding tip:
Für eine optimale Sicht-barkeit sollten relevan-te Informationen (Logo, claims...) im oberen Be-reich der Plane angelegt werden.
For a better visibility logos and important information should be placed in the upper part of the cover.
DachkubusplaneGröße (BxH)1700 mm x 1570 mm
Dachkubus OutdoorRoof cube Outdoor
1545
mm
Öse: ca. 25 mm Durchmesser (Außenkante)Hookeyes: ca. 25 mm diameter
1570
mm
1700 mm
1675 mm
1165
mm
1263 mm
785
mm
850 mm
405
mm
438 mm
25 mm
25mm
Öse auf der Plane genaumittig positioniertHookeye is exactly cen-trally positioned
9-A.A
9-A.A
9-A.B
9-A.B
9-A.C
9-A.C
9-A.D
9-A.D
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
11
Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Flächentyp
34Surface type
Ansicht ViewAnsicht View
Branding Tipp:Branding tip:
Für eine optimale Sicht-barkeit sollten relevan-te Informationen (Logo, claims...) im oberen Be-reich der Plane angelegt werden.
For a better visibility logos and important information should be placed in the upper part of the cover.
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
Roof cube textile bannerSize (WxH):1875 mm x 1768 mm
TextilbannerGröße (BxH)1875 mm x 1768 mm
Dachkubus mit KederRoof cube with welt
34-A.A 34-A.C34-A.B
1768
mm
1875 mm
34-A.A 34-A.B 34-A.C 34-A.D
34-A.D
20 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
20 mm trimming and cut marks are
required for all print-data.
12
Ansicht View
Flächentyp
XSurface type
Ansicht View Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
modulbox HC2
Flächentyp
5Surface type
Flächentyp
6Surface type
Ansicht View
Ansicht View
6.1
6.2
6.4
6.3
5
2135 mm
2000 mm
2000
mm
2135 mm
2135 mm
2135
mm
1803 mm
ca. 97 mm
ca. 97 mm
ca.
170
mm
1803
mm
1803 mm
1803 mm
56.2 6.4
6.1
6.3
Zur ÜbersichtTo overview
Floor (5)Size (WxH):2000 mm x 2000 mm
Platform (6)Size (WxH):1803 mm x 2135 mm
Boden (5)Größe (BxH)2000 mm x 2000 mm
Plattform (6)Größe (BxH)1803 mm x 2135 mm
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
13
Ansicht View
Flächentyp
XSurface type
Ansicht View Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
modulbox HC2
Ansicht View
Flächentyp
7Surface type
Ansicht View
7.2
7.2
7.1
7.1
7.4
7.4
7.3
2226 mm
2226 mm
2226 mm
2226
mm
2004 mm20
04 m
m
2004 mm
2004 mm
7.2 7.4
7.1
7.3
Foldable roofSize (WxH):2004 mm x 2226 mm
KlappdachGröße (BxH)2004 mm x 2226 mm
Bitte die Druckanforderungen beachten!Please pay attention to the print requirements!
6 mm Beschnittzugabe mit
Schnittmarken
bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
ca. 40 mm
Abstand zwischen Boden und Branding Fläche von dem Klappdach in geklapptem Zustand
14
Ansicht View
Flächentyp
XSurface type
Ansicht View Technische DetailsTechnical details
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
modulbox HC2
Befestigung an dem modulbox DachFastening to modulbox roof
Flächentyp
15Surface type
Transport coverTransport cover made of Trevira plastic film (680 gr. per m²)
TransportplaneTransportplane aus Trevira Kunstoff(680 gr. pro m²)
6 mm
Beschnittzugabe mit
Schnittmarken bei
jeder
Druckdatei bitte
anlegen.
6 mm trimming and cut marks are
required for all print-data.
Ansicht View
150mm
150mm
150mm
150mm
2650
mm
130
mm
2480 mm
480
mm
KederWelt
: Reißverschluss Zip
: Spannbänder Straps
: Schlaufen Hangers
KederWelt
Kede
r
Welt
Kederschien
e
Welt trac
k
: Laschen Hangers
2650 mm
2480 mm
2650 mm
2480 mm
2650 mm
2480
mm
2650
mm
2480 mm
15.2 15.4
15.1
15.3
: innere Fläche für gut lesbare Informationen, Texte, Logos, etc.
intern area for good readable informations, texts, logos, etc.
100 mm zwischen Reißverschlussund Lasche/Spannband Naht100 mm beetween zip and straps stitching
: Fläche, nicht plan, mit Laschen und Zurrgurten, für Hintergrundbilder, etc.
Area, not flat, with hangers and lashing belt, for underground pictures. etc.
BxH (WxH)2000 x 2250 mm (zentriert centered)
15
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
UmsetzungsbeispieleProduction examples
Klickbare SymboleClickable symbols
16
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Flächentyp Surface type 5, 6 Flächentyp Surface type 7
Flächentyp Surface type 2Flächentyp Surface type 1, 3, 4
modulbox HC2
Umsetzungbeispiele
Production exemples
17
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Flächentyp Surface type 10, 11 Flächentyp Surface type 12
Flächentyp Surface type 9Flächentyp Surface type 8
modulbox HC2
Umsetzungbeispiele
Production exemples
18
Zurück zur ÜbersichtBack to Overview
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Flächentyp Surface type 15 Flächentyp Surface type 16
Flächentyp Surface type 14Flächentyp Surface type 13
modulbox HC2
Umsetzungbeispiele
Production exemples
19
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
Druckanforderungen allgemeinGeneral print requirements
20
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
To overviewZur Übersicht
General print requirementsFor the processing of the print files the following points are to be considered:
Print standards – files
• The data must be made available as closed pdf files and open files (InDesign, Photoshop, Illustrator...).
• Resolution of the graphic data 300dpi (graphic without Text, at least 150dpi) at a 100% positioning in the attachement format. Optimally, text has to be vectorised.
• One file each is needed per branding surface. Each file has to be named according to the branding surface identification: for exemple “2-A.1” or “1-I.2”. More details on the following page.
• 20 mm trimming and cut marks are required for textil surfaces print-data. 6 mm trimming and cut marks are required for panel surfaces print-data.
• Print pattern must be put in CMYK-colour mode.
• Any special colors that may have been created are automatically converted into the CMYK color palette, the resulting small color changes are due to technical reasons and do not constitute a reason for complaint.
• If special color (s) are explicitly requested, these must be reported in writing prior to production; the resulting additional costs and extended production times are agreed separately. These special colors are to be created in Pantone or HKS color mode.
• For logos (CI colours etc..) the colour is to be indicated additionally in the Pantone|HKS|RAL|NCS color mode.
• Special colours are to be put in the Pantone or HKS colour mode.
• Colours such as silver, gold, etc. are not possible.
Overview
• For the arrangement of the individual panels an overview is needed.
• Consider panel interior and exteriors sides.
Druckanforderungen allgemeinFür die Verarbeitung der Druckdateien sind folgende Punkte zu beachten:
Druckvorgaben - Daten
• Die Daten sind als geschlossene PDF-Dateien und offene Arbeitsdateien(InDesign, Photoshop, Illustrator...) zur Verfügung zu stellen.
• Auflösung der Bilddaten 300dpi (Bilder ohne Text mindestens 150dpi) bei 100% Positionierung im Anlagenformat. Am Besten sollen Texte vektorisiert werden.
• Pro Branding Fläche wird jeweils eine Datei benötigt. Die Datei soll nach der Branding Fläche Bezeichnung genannt werden: zum Beispiel “2-A.1” oder “1-I.2”. Mehr Details auf der folgenden Seite.
• 20 mm Beschnittzugabe mit Schnittmarken bei jeder Druckdatei für Textilflächen bitte anlegen. 6 mm Beschnittzugabe mit Schnittmarken bei jeder Druckdatei für Paneelflächen bitte anlegen.
• Druckvorlage muß im CMYK-Farbmodus angelegt sein.
• Eventuell angelegte Sonderfarben werden automatisch in die CMYK Farbpalette umgewandelt, die sich daraus ergebenen kleinen Farbaenderungen sind technisch bedingt und stellen keinen Reklamationsgrund dar.
• Sind Sonderfarbe(n) explizit gewünscht, muessen diese vor Produktion schriftlich angezeigt werden, die daraus resultierenden Mehrkosten und verlängerte Produktionszeiten werden separat vereinbart. Diese Sonderfarben sind im Pantone- oder HKS-Farbmodus anzulegen.
• Für Logos (CI-Farben etc.) ist der Farbton zusätzlich im Pantone|HKS|RAL|NCS Farbmodus anzugeben.
• Sonderfarben sind im Pantone- oder HKS-Farbmodus anzulegen.
Übersichtsschema
• Zur Anordnung der einzelnen Paneele wird eine Abwicklung/ ein Übersichtsschema benötigt.
• Innen- und Außenseiten von Paneele beachten.
21
modulbox mo systeme GmbH & Co KGNeumagener Str. 4213088 Berlin
Telefon: +49 (0)30 9210557 10Fax: +49 (0)30 9210557 90Email: info@mo-systeme.com
To overviewZur Übersicht
Deadline
• For production starting from supply of the print data at least two weeks are needed.
• The exact time run is co-ordinated in each individual case!
• If proofs are required, they must be ordered in due time. This could extend the production time.
• Proofs are invoiced separately.
Termine
• Für die Produktion werden ab Lieferung der fertigen Druckdaten mind. zwei Wochen benötigt.
• Der genaue Zeitlauf wird in jedem Einzelfall abgestimmt!
• Werden Proofs gewünscht, muß dies mit ausreichendem Vorlauf bestellt werden, dadurch kann sich die Produktionszeit verlängern. Proofs werden gesondert berechnet.
modulbox mo systeme GmbH & Co. KGNeumagener Str. 42D 13088 BerlinGERMANY
tel : +49.(0)30.9210.557.10fax: +49.(0)30.9210.557.90email: info@mo-systeme.comwebsite: www.mo-systeme.com
Die modulbox ist patentrechtlich beim Deutschen Patent- und Markenamt eingetragen.Änderungen vorbehalten. Alle Angaben freibleibend und unverbindlich. Stand Januar 2021
The modulbox is covered by patents. All data and specifica-tions stated without obligation - subject to change without notice - status January 2021
Recommended