bersicht Netzteile AKL - ac-dc-motor.eu€¦ · Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment) ... 1.6A/115V 0.96A/230V

Netzteile

Katalog 08-2016

Technische Änderungen, Fehler und Irrtümer vorbehalten! OTT GmbH & Co. KG ● 78652 Deißlingen ● Tel.: 07420-9399-0 ● Fax.: 07420-9399-25 ● Email: [email protected]

Übersicht Schaltnetzteile Serie AKL... Diese Schaltnetzteile sind gut geeignet für induktive Lasten wie zum Beispiel DC-Motoren.

Artikelnummer Ausgangsspannung Nennstrom Nennleistung Eingangsspannungsbereich

( VDC ) ( A ) ( W ) ( VAC )

AKL10001-01 24 1,5 36 88-264

AKL10002-01 24 2 48 85-264

AKL10003-01 24 2,5 60 88-264

AKL10004-00 12 6,3 76 85-264

AKL10004-01 24 3,2 76,8 85-264

AKL10004-02 48 1,6 76,8 85-264

AKL10005-01 24 5 120 88-132/176-264 (umschaltbar)

AKL10006-01 24 10 240 85-264

AKL10007-01 24 20 480 180-264

AKL10007-02 48 10 480 180-264

AKL10008-01 24 10 240 340-550 (Dreiphasen)

AKL10008-02 48 5 240 340-550 (Dreiphasen)

AKL10009-01 24 20 480 340-550 (Dreiphasen)

AKL10009-02 48 10 480 340-550 (Dreiphasen)

AKL10010-01 24 40 960 340-550 (Dreiphasen)

AKL10010-02 48 20 960 340-550 (Dreiphasen)

AKL10011-01 5 6 30 85-264

AKL10011-02 12 3,33 40 85-264

AKL10011-03 24 1,7 40,8 85-264

AKL10011-04 48 0,83 39,8 85-264 Weitere Schaltnetzteile auf Anfrage.

Schaltnetzteil 1-phasig

- voller AC-Eingangsbereich- auf DIN-Schiene TS35/7,5 oder 15 montierbar- langlebig- hohe Leistungsfähigkeit, geringe Betriebstemperatur- eingebauter Entstörfilter, geringe Restwelligkeit- LED - Anzeige- kompakte Größe, Leicht- 100% Burn-In Test unter Volllast- Kurzschluss- / Überlast- / Überspannungsschutz- ohne Lüfter- Zulassungen: UL/TUV/CE- Sicherheit: UL60950-1, TUV EN 60950-1- EMV:

AKL10001-01

Ausgangsspannung [VDC] 24

Einstellbereich der Ausgangsspannung [VDC] 21,6 - 26,4

Nennstrom [A] 1,5

Nennleistung [W] 36

Restwelligkeit (max.) [mVss] 150

Spannungstoleranz [%] +/- 1

Netzausfallüberbrückung (typ.)

Eingangsspannungsbereich

Frequenzbereich [Hz] 47 - 63

Wirkungsgrad (typ.) [%] 83

Stromaufnahme (typ.)

Einschaltstossstrom (typ.)

Überlast

Überspannung [VDC] 27,6 - 32,4

Übertemperatur [°C] 90 +/-5

Umgebungstemperatur (Betrieb) [°C]

Luftfeuchtigkeit (Betrieb)

Umgebungstemperatur (Lagerung) [°C]

Vibration

Isolationsspannung [VAC]

Isolationswiderstand

MTBF

Abmessungen (A, B, C) [mm] 78 x 93 x 56 (B X H X T)

Gewicht [kg] 0,27

EN550011, EN55022 Klasse B, EN61000-3-2,3,EN61000-6-2, EN61000-4-2,3,4,5,6,8,11, ENV50204EN55024, EN61204-3

Artikelnummer

100ms / 230VAC 21ms / 115VAC (bei Nennstorm)

88 - 264VAC 124 - 370VDC

Eingang

0,88A / 115VAC 0,48A / 230VAC

Kaltstart 15A / 115VAC 30A / 230VAC

Ausgang

Schutz-funktionen

Abschaltung der Ausgangsspannung . Neustart mit Wegnahme der Primärspannung

20 - 90%, nicht kondensierend

-20 - +60

105 -160% über NennlastStrombgrenzung, wird automatisch zurückgesetzt

-40 - +85 10 - 95% rel. Luftfeuchtigkeit

10 - 500Hz, 2G, 10min./1Zyklus, 60 Min. X,Y,Z-Achsen

AllgemeineDaten

Eingang/Ausgang: 3k

100MOhm / 500VDC

441,5k Stunden min. MIL-HDBK-217F (25°C)

Umgebung

Datenblatt

OTT GmbH & Co. KG ● D-78652 Deißlingen ● Tel.: +49 (0)7420-9399-0 ● Fax.: +49 (0)7420-9399-25 ● Email: [email protected]

Blockschaltbild

Leistungsherabsetzung

M e c h a n i s c h e E i g e n s c h a f t e n Maßeinheit: mm

date: 13-02-2007

-2 0 0 10 20 30 40 5 0 6 0 70

20

40

60

80

100

Umgebungstemeratur (°C)

Bel

astb

arke

it (

%)

Terminal PIN Nr. ZuordnungPin No. Pin No.

2

1 5,6

3,4

7

8

Assignment Assignment

+V

AC/N

AC/L

-V

LED

+VADJ.

Zulässige Befestigungsschiene: TS35/7.5 oder TS35/15

93

655

55

5

34

2

37

.75

1

78

12

.2

7

8

45

68

46.5

27

.4

3

47

56

46.5

CIRCUIT

DETECTION

O.L.P.

EMI

FILTER

RECTIFIERS

&

FILTER

POWER

SWITCH-

FILTER

&

RECTIFIERS +V

-VI/P

ING

CONTROL

O.V.P.

Eingangsspannung (VAC) 60Hz

85 10095 120115 160140 200180 240220 264

Bel

astb

arke

it (

%)

Ta=25

90

100

80

70

60

50

40

35

Gehäuse Nr. 918B

Leistungsherabsetzung in Abhängikeit der Eingangsspannung

Datenblatt

OTT GmbH & Co. KG ● 78652 Deißlingen ● Tel.: 07420-9399-0 ● Fax.: 07420-9399-25 ● Email: [email protected]


- voller AC-Eingangsbereich- auf DIN-Schiene TS35/7,5 oder 15 montierbar- langlebig- hohe Leistungsfähigkeit, geringe Betriebstemperatur- eingebauter Entstörfilter, geringe Restwelligkeit- LED - Anzeige- kompakte Größe, Leicht- 100% Burn-In Test unter Volllast- Kurzschluss- / Überlast- / Überspannungsschutz- ohne Lüfter- Zulassungen: UL/TUV/CE- Sicherheit: UL508, UL60950-1, TUV EN 60950-1- EMV:

AKL10002-01



Nennstrom [A] 2,0

Nennleistung [W] 48

Restwelligkeit (max.) [mVss]








Überlast






Vibration



MTBF


Gewicht [kg] 0,27


Artikelnummer


85 - 264VAC 120 - 370VDC

Eingang

0,88A / 115VAC 0,48A / 230VAC


Ausgang

Schutz-funktionen



-20 - +60




AllgemeineDaten

Eingang/Ausgang: 3k

100MOhm / 500VDC


Umgebung

Datenblatt


Blockschaltbild



date: 13-02-2007

-2 0 0 10 20 30 40 5 0 6 0 70

20

40

60

80

100


Bel

astb

arke

it (

%)


2

1 5,6

3,4

7

8


+V

AC/N

AC/L

-V

LED

+VADJ.


93

655

55

5

34

2

37

.75

1

78

12

.2

7

8

45

68

46.5

27

.4

3

47

56

46.5

CIRCUIT

DETECTION

O.L.P.

EMI

FILTER

RECTIFIERS

&

FILTER

POWER

SWITCH-

FILTER

&

RECTIFIERS +V

-VI/P

ING

CONTROL

O.V.P.

Eingangsspannung (VAC) 60Hz

85 10095 120115 160140 200180 240220 264

Bel

astb

arke

it (

%)

Ta=25

90

100

80

70

60

50

40

35

Gehäuse Nr. 918B

Leistungsherabsetzung in Abhängikeit der Eingangsspannung

Datenblatt



- voller AC-Eingangsbereich- auf DIN-Schiene TS35/7,5 oder 15 montierbar- langlebig- hohe Leistungsfähigkeit, geringe Betriebstemperatur- eingebauter Entstörfilter, geringe Restwelligkeit- LED - Anzeige- kompakte Größe, Leicht- 100% Burn-In Test unter Volllast- Kurzschluss- / Überlast- / Überspannungsschutz- ohne Lüfter- Zulassungen: UL/TUV/CE- Sicherheit: UL508, UL60950-1, TUV EN 60950-1- EMV:

AKL10003-01



Nennstrom [A] 2,5

Nennleistung [W] 60









Überlast






Vibration



MTBF


Gewicht [kg] 0,3


Artikelnummer


88 - 264VAC 124 - 370VDC

Eingang

1,2A / 115VAC 0,8A / 230VAC


Ausgang

Schutz-funktionen



-20 - +60




AllgemeineDaten

Eingang/Ausgang: 3k

100MOhm / 500VDC


Umgebung

Datenblatt


Blockschaltbild



date: 13-02-2007

-2 0 0 10 20 30 40 5 0 6 0 70

20

40

60

80

100


Bel

astb

arke

it (

%)


2

1 5,6

3,4

7

8


+V

AC/N

AC/L

-V

LED

+VADJ.


93

655

55

5

34

2

37

.75

1

78

12

.2

7

8

45

68

46.5

27

.4

3

47

56

46.5

35

Gehäuse Nr. 918B

Datenblatt


SPECIFICATION

Features :

file:

date: 08-02-2007xx-xxxx

Serial-No.

75W Single Output

Industrial DIN Rail Power Supply

Universal AC input/Full range

Protections:Short circuit/Over load/Over voltage/Over temperature

Cooling by free air convection

Can be installed on DIN rail TS-35/7.5 or 15

UL 508(industrial control equipment)approved

LED indicator for power on

100% full load burn-in test

Fix switching frequency at 50KHz

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUT VOLTAGE ADJ. RANGE

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE

EFFICIENCY (Typ.)

AC CURRENT (Typ.)INPUT

INRUSH CURRENT (Typ.)

LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

HARMONIC CURRENT

EMS IMMUNITY

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

DIMENSION

NOTE

PACKING

OVER LOAD

OVER VOLTAGE

12V 24V 48V

6.3A 3.2A 1.6A

0 ~ 6. 3A 0 ~ 3 .2A 0 ~ 1 .6A

76 W 7 6.8 W 7 6.8 W

10 0mVp -p 150 mVp- p 2 40m Vp-p

2.0% 1.0% 1.0%

12 ~ 1 4V 2 4 ~ 28V 48 ~ 53 V

0.5% 0.5% 0.5%

1.0% 1.0% 1.0%

85 ~ 264VAC 120 ~ 370VDC

47 ~ 63Hz

76% 80% 81%

1.6A/115V 0.96A/230V

COLD START 20A/115VAC 40A/230VAC

<1mA / 240VAC

105 ~ 150% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

15 ~ 16.5V 29 ~ 34V 58 ~ 65V

Protection type : Hiccup mode, recovers automatically after fault condition is removed

85 5 (TSW1) Detect on heat sink of power transistor

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

UL508, TUV EN60950-1 Approved

Compliance to EN55011,EN55022 (CISPR22) Class B

Compliance to EN61000-3-2,-3

Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A

-10 ~ +60 (Refer to output load derating curve)

20 ~ 90% RH non-condensing

-20 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

123.1K hrs min. MIL-HDBK-217F (25 )

55.5*125.2*100mm (W*H*D)

0.6Kg; 20pcs/13Kg/1.1CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

1000ms, 60ms/230VAC 1800ms, 60ms/115VAC at full load

60ms/230VAC 12ms/115VAC at full load

RIPPLE & NOISE (max.) Note.2

VOLTAGE TOLERANCE Note.3

EMI CONDUCTION & RADIATION

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

MTBF

OTHERS

ENVIRONMENT

PROTECTION

SAFETY &

EMC(Note 4)

R

AKL10004-01

AKL10004-02

AKL10004-00

75W Single Output


file:

date: 29.11.2006xx-xxxx

Serial-No.

-10 0 10 20 30 45 50 60

20

40

60

80

100

12V

24V,48V

85 90 105 125 145 165 185 205 225 265245

100

90

80

70

60

50

40

Terminal Pin. No Assignment (TB1) Terminal Pin. No Assignment (TB2)

Pin No. Pin No.

1 1,2

2 3,4

3


FG

AC/L(DC-)

AC/N(DC+)

DC OUTPUT +V

DC OUTPUT -V

35

ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15

Mechanical Specification

Output Derating Output Derating Vs Input Voltage

Case No. 923 Unit:mm

AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz

LO

AD

(%

)

(VE

RT

ICA

L)

1

3

2

TB1 TB2

LED

2

4

3

1

+VADJ.125.2

55

.5

10

0

LO

AD

(%

)


- voller AC-Eingangsbereich (über Schalter wählbar)- langlebig- hohe Leistungsfähigkeit, geringe Betriebstemperatur- eingebauter Entstörfilter, geringe Restwelligkeit- LED - Anzeige- kompakte Größe, Leicht- 100% Burn-In Test unter Volllast- Kurzschluss- / Überlast- / Überspannungs- / Temperaturschutz- ohne Lüfter- Zulassungen: UL/TUV/CE- Sicherheit: UL508, UL60950-1, TUV EN 60950-1- EMV: EN55022 Klasse B, EN61000-3-2,3,

EN61000-6-2, EN61000-4-2,3,1,2,3,11, ENV50204

AKL10005-01


Einstellbereich der Ausgangsspannung [VDC] 24 ~ 28

Nennstrom [A] 5

Nennleistung [W] 120









Leckstrom

Überlast

Überspannung [VDC] 29 ~33





Vibration



MTBF

Abmessungen (A, B, C) [mm] 100x66x126

Gewicht [kg] 0,79

Artikelnummer


88 ~ 132VAC / 176 ~264VAC (umschaltbar) 248 ~ 370VDC

Eingang2,6A / 115VAC 1,6A / 230VAC


<3,5mA / 240VAC

Ausgang

Schutz-funktionen Abschaltung der Ausgangsspannung . Neustart mit Wegnahme der Primärspannung

Abschaltung der Ausgangsspannung, automatischer Neustart nach Temperaturrückgang

20 ~ 90%, nicht kondensierend

-10 ~+60

105 ~150% über NennlastStrombgrenzung, wird automatisch zurückgesetzt

-20 ~ +85, 10 ~95% rel. Luftfeuchtigkeit

10 ~ 500Hz, 2G, 10min./1Zyklus, 60 Min. X,Y,Z-Achsen

AllgemeineDaten

Eingan/Ausgang: 3k Eingang/Gehäuse 1,5k Ausgang Gehäuse 0,5k

100MOhm / 500VDC

136.800 Stunden min. MIL-HDBK-25°C

Umgebung

Datenblatt


Case No. 921A Unit:mm

INPUT VOLTAGE (V) 60Hz

UT

UT

VT

GE

(V)

OP

O

LA

UT

UT

OP

L

RIP

PE

(m

Vp

-p)

Ta=25

Terminal Pin. No Assignment (TB1) Terminal Pin. No Assignment (TB2)Pin No. Pin No.

1 1,22 3,43

Assignment AssignmentFG

AC/LAC/N

DC OUTPUT +VDC OUTPUT -V

AMBIENT TEMPERATURE ( )

A%

)L

OD

(

-10 0 10 20 30 45 50 60

20

40

60

80

100

12V,24V

48V

100200

85170160

8

80180 190

9590

12

16

20

24

115230210 220

110105250240 260125120 130

28

32

80

100

150

200

250

300

350

(VERTICAL)


Output Derating Static Characteristics (24V)


35

21

3

TB2TB1

4

21

3

LED

+VADJ.125.2

115

VAC

65

.5

23

0VA

C

10

0

Datenblatt


SPECIFICATION

AKL10006-xx240W Single Output


file:


Serial-No.

Features :

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER


LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD TIME (Typ.)

VOLTAGE RANGE Note.5

FREQUENCY RANGE

EFFICIENCY (Typ.)INPUT


LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

HARMONIC CURRENT

SAFETY &

EMS IMMUNITY

WORKING TEMP.

WORKING HUMIDITY


TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVER LOAD

OVER VOLTAGE

AC CURRENT (Typ.)

24V 48V

10A 5A

0 ~ 10A 0 ~ 5A

240W 240W

80mVp-p 150mVp-p

24 ~ 28V 48 ~ 53V

1.0%

0.5% 0.5%

1.0%

1.0%

1.0%

85 ~ 264VAC 120 ~ 370VDC

47 ~ 63Hz

84% 85%

54 ~ 60V

2.8A/115VAC 1.4A/230VAC

COLD START 27A/115VAC 45A/230VAC<3.5mA / 240VAC105 ~ 150% rated output power

30 ~ 36V


Protection type : Shut down o/p voltage, re-power on to recover100 5 (TSW1)Detect on heat sink of power transistor




-20 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 5010 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

105.5Khrs min. MIL-HDBK-217F (25 )

125.5*125.2*100mm (W*H*D)1.2Kg; 12pcs/15.5Kg/1.2CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.5. Derating may be needed under low input voltages. Please check the derating curve for more details.

UL508, TUV EN60950-1 ApprovedUL60950-1,

Compliance to EN55011,EN55022 (CISPR22) Class B


Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A

Universal AC input / Full range

Built in active PFC function







Fixed switching frequency at 100KHz

ENVIRONMENT

PROTECTION

EMI CONDUCTION & RADIATIONEMC(Note 4)

WITHSTAND VOLTAGE




800ms, 40ms 00ms, 40ms/230VAC 8 /115VAC at full load

24ms ms/230VAC 24 /115VAC at full load



POWER FACTOR (Typ.) 0.96/230VAC 0.99/115VAC at full load

R

AKL10006-02

Michael.Ott

Textfeld

AKL10006-01

240W Single Output


file:


Serial-No.


INPUT VOLTAGE (V) 60Hz

AL

OD

(%

)

Ta=25

Terminal Pin. No Assignment (TB1) Terminal Pin. No Assignment (TB2)Pin No. Pin No.

1 1,22 3,43

Assignment AssignmentFG

AC/LAC/N

DC OUTPUT +VDC OUTPUT -V


LO

AD

(%

)

-10 0 10 20 30 40 50 55 60 70

Vin: 230VAC110VAC

20

--

40

60

80

100

100

40

85 110

50

60

70

80

155135 230 264

90

100

(VERTICAL)


Output Derating Output derating VS input voltage

110VAC

230VAC

Admissible Din Rail: TS35/7.5 or TS35/15

35

+VADJ.

125.5

12

5.2

100

TB2

3

TB1 LED

2 1 1234

SPECIFICATION

Features :

480W Single Output


file:


Serial-No.

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER


LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE



LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

HARMONIC CURRENT

EMS IMMUNITY

WORKING TEMP.

WORKING HUMIDITY


TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVER LOAD

OVER VOLTAGE

AC CURRENT (Typ.)

1200ms, 40ms/230VAC at full load

16ms/230VAC at full load

180 ~ 264VAC 250 ~ 370VDC

47 ~ 63Hz

89%

0.7

4A/230VAC

54 ~ 60V

COLD START 40A/230VAC

<3.5mA / 240VAC


30 ~ 36V


Protection type : Shut down o/p voltage, re-power on to recover

100 5 (TSW : Detect on heatsink of power switch)


UL508, TUV EN60950-1 ApprovedUL60950-1,

Compliance to EN55022 (CISPR22) Class B


Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A



-20 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50

Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6


227*125.2*100mm (W*H*D)


POWER FACTOR (Typ.)

48V

10A

0 ~ 10A

480W

120mVp-p

48 ~ 53V

1.0%

0.5%

1.0%

24V

20A

0 ~ 20A

480W

120mVp-p

24 ~ 28V

1.0%

0.5%

1.0%

Built-in passive PFC function compliance to EN61000-3-2

High efficiency 89% and low dissipation



Built-in constant current limiting circuit



EN61000-6-2(EN50082-2) industrial immunity level


WITHSTAND VOLTAGE





ENVIRONMENT

SAFETY &

EMC(Note 4)

PROTECTION



1. All parameters NOT specially mentioned are measured at 230VAC input, r ated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

R

AKL10007-02 AKL10007-01

Michael.Ott

AKL10007-xx

480 W Single Output

Industrial DIN Rail with PFC Function

file:


Serial-No.

File Name:DRP-480-SPEC 2005-09-06


Derating Curve Output Derating VS Input Voltage

Case No.930 Unit:mm

AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz

180 190 200 264

100

90

80

70

60

50

40

LO

AD

(%

)

LO

AD

(%

)

-20 0 10 20 30 40 50 60 70 (VERTICAL)

20

40

60

80

100

TB1 Terminal Pin. No Assignment TB2 Terminal Pin. No Assignment

Pin No. Pin No.

1 1,2

3

2 3,4


FG

AC/N(DC-)

AC/L(DC+) DC OUTPUT +V

DC OUTPUT -V

227100

+V ADJ.

35

3 12

TB1 TB2

12

5.2

34LED 2 1


DRP-480series480W Single Output Industrial DIN RAIL with PFC Function

Michael.Ott

AKL10007-xx

Features :

file:


Serial-No.

240W Three Phase

Industrial DIN RAIL Power Supply

Three-Phase AC 340 ~ 550V wide range input









R

SPECIFICATION

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUTVOLTAGE ADJ. RANGE

LINE REGULATION

LOAD REGULATION

SETUP, RISE, HOLD TIME

VOLTAGE RANGE

FREQUENCY RANGE


INRUSH CURRENT (max.)

LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

EMS IMMUNITY

WORKING TEMP.

WORKING HUMIDITY


TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVER LOAD

OVER VOLTAGE

AC CURRENT

24V

10A

0 ~ 10A

240W

80mVp-p

24 ~ 28V

1.0%

0.5%

0.5%

1200ms, 40ms, 20ms/400VAC 800ms, 40ms, 40ms/500VAC at full load

Three-Phase 340 ~ 550VAC 480 ~ 780VDC

47 ~ 63Hz

89%

0.95A/400VAC 0.75A/500VAC

COLD START 50A

<3.5mA / 530VAC


30 ~ 36V



100 5 (TSW) Detect on heatsink of power switch


UL508, UL60950-1, TUV EN60950-1 Approved

Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B

Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A



-40 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes


125.5*125.2*100mm (W*H*D)

1.3Kg; 12pcs/16.6Kg/1.34CUFT

48V

5A

0 ~ 5A

240W

80mVp-p

48 ~ 55V

1.0%

0.5%

0.5%

59 ~ 66V



ENVIRONMENT

SAFETY &

EMC(Note 4)

PROTECTION


1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.5. Dual phase operation: derating of 20% is required.

WITHSTAND VOLTAGE




Michael.Ott

AKL10008-xx

Michael.Ott

AKL10008-01

Michael.Ott

AKL10008-02

Michael.Ott


240W Three Phase

file:


Serial-No.


Derating Curve



LO

AD

(%

)

-20 0 10 20 30 40 50 60 70 (VERTICAL)

20

40

60

80

100

TB1 Terminal Pin. No Assignment TB2 Terminal Pin. No Assignment

Pin No. Pin No.

1 1,2

3

4

2 3,4


AC/L2

AC/L1

AC/L3

DC OUTPUT +V

DC OUTPUT -V


1234LED

TB1 TB2

23 1

125.5

12

5.5

100

+V ADJ.

4

Static Characteristics

LO

AD

(%

)

INPUT VOLTAGE (VAC) 60Hz

340 355 370 385 400 415 475430 490460 505 520 550

90

100

80

70

60

50

40

Three phase operation

Dual phase operation

35

FG

Michael.Ott

AKL10008-xx

SPECIFICATION

Features :

file:


Serial-No.

480W Three Phase


R










MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER


LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE



LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

HARMONIC CURRENT

EMS IMMUNITY

WORKING TEMP.

WORKING HUMIDITY


TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

PACKING

OVER LOAD

OVER VOLTAGE

AC CURRENT (Typ.)

24V

20A

0 ~ 20A

480W

80mVp-p

24 ~ 28V

1.0%

0.5%

0.5%



Three-Phase 340 ~ 550VAC 480 ~ 780VDC

47 ~ 63Hz

89%

1.7A/400VAC 1.3A/500VAC

COLD START 50A

<3.5mA / 530VAC


30 ~ 36V



110 5 (TSW) Detect on heatsink of power switch








-40 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50

Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6


227*125.2*100mm (W*H*D)


48V

10A

0 ~ 10A

480W

80mVp-p

48 ~ 55V

1.0%

0.5%

0.5%

59 ~ 66V

ENVIRONMENT

SAFETY &

EMC(Note 4)

PROTECTION

WITHSTAND VOLTAGE




EMI CONDUCTION & IRADIAT ON

NOTE1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.5. Dual phase operation: derating of 20% is required.



90%

AKL10009-01

Michael.Ott

AKL10009-xx

Michael.Ott

AKL10009-02

Michael.Ott


480W Three Phase

file:


Serial-No.


Derating Curve

Case No.930A Unit:mm


LO

AD

(%

)

-20 0 10 20 30 40 50 60 70 (VERTICAL)

20

40

60

80

100


TB2 Terminal Pin. No Assignment

Pin No.

1,2

3,4

Assignment

DC OUTPUT +V

DC OUTPUT -V


Pin No.

1

3

4

2

Assignment

FG

AC/L2

AC/L3

AC/L1

227

12

5.2

+V ADJ.

35

TB1 TB234LED 2 1

100

24 3 1


LO

AD

(%

)


340 355 370 385 400 415 475430 490460 505 520 550

90

100

80

85

70

60

50

40

Three phase operation

Dual phase operation

Michael.Ott

AKL10009-xx


960W Three Phase

SPECIFICATION

Features :

file:


Serial-No.




Optional parallel function(1+1)





100% full load burn-in testR

Protection type : Constant current limiting, unit will shut down o/p voltage after 3 sec. , re-power on to recover

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER


LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE


INRUSH CURRENT (max.)

LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

HARMONIC CURRENT

EMS IMMUNITY

WORKING TEMP.

WORKING HUMIDITY


TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

PACKING

OVER LOAD

OVER VOLTAGE

AC CURRENT (Typ.)

24V

40A

0 ~ 40A

960W

80mVp-p

24 ~ 28V

1.0%

0.5%

0.5%



Three-Phase 340 ~ 550VAC

47 ~ 63Hz

91%

2A/400VAC 1.6A/500VAC

COLD START 50A

<3.5mA / 530VAC


30 ~ 36V


110 5 (TSW1) Detect on heatsink of power transistor 85 5 (TSW2) Detect on heatsink of power diode








-40 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50

Component: Compliance to IEC60068-2-610 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting:


276*125.2*100mm (W*H*D)

3.3Kg; 4pcs/14.2Kg/1.14CUFT

48V

20A

0 ~ 20A

960W

80mVp-p

48 ~ 55V

1.0%

0.5%

0.5%

59 ~ 66V

ENVIRONMENT

SAFETY &

EMC(Note 4)

PROTECTION

WITHSTAND VOLTAGE





NOTE1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.



92%

Michael.Ott

AKL10010-xx

Michael.Ott

AKL10010-01

Michael.Ott

AKL10010-02

Serial-No.


960W Three Phase


Derating Curve

Case No.934 Unit:mm


LO

AD

(%

)

-20 0 10 20 30 40 45 50 60 70

20

40

60

50

80

100



Pin No.

1,2,3

4,5,6

Assignment

DC OUTPUT +V

DC OUTPUT -V


Pin No.

1

3

4

2

Assignment

FG

AC/L2

AC/L3

AC/L1


LO

AD

(%

)


340 355 380 385 400 415 475430 490460 505 520 550

90

100

80

70

60

50

40

35

(VERTICAL)

36 2 124 3 1 45

276100

TB1 TB2

12

5.2

LED

+VADJ

ALARM

file:


Michael.Ott

AKL10010-xx


960W Three Phase

file:


Serial-No.


Pin No.

1,2,3

4,5,6

7

8

Assignment

DC OUTPUT +V

DC OUTPUT -V

GND

P(Current Share)


Note: Under parallel operation, if the load current is too small, only one PSU(master) would provide the power and hence the LEDindicator of other PSUs may not light up.

Pin No.

1

3

4

2

Assignment

FG

AC/L2

AC/L3

AC/L1

5 413

TB1 TB1

PSU PSU

4 2 126 38 7 78 36 2 124 3 1 45

LOAD

+V -V

TB2

LED LED

TB2

Parallel Function (1+1)-Optional (Special order required)

Michael.Ott

AKL10010-xx

40 W Single Output


file:date: 19-03-08

xx-xxxx

Serial-No.

Universal AC input/Full range

Protections: Short circuit / Overload / Over voltage



NEC class 2 / LPS compliant (12V,24V,48V only)


DC OK relay contact

No load power consumption<0.75W


Features :

SPECIFICATIONMODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER


LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME Note.5

HOLD UP TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE

EFFICIENCY (Typ.)

AC CURRENT (Typ.)INPUT


SAFETY STANDARDS

HARMONIC CURRENT

EMS IMMUNITY

WORKING HUMIDITY

WORKING TEMP.

DC OK SIGNAL


TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVERLOAD

OVER VOLTAGE

5V 12V 24V 48V

6A 3.33A 1.7A 0.83A

0 ~ 6A 0 ~ 3.33A 0 ~ 1.7A 0 ~ 0.83A

30W 40W 40.8W 39.8W

80mVp-p 120mVp -p 150mVp -p

24 ~ 30V

200mVp-p

48 ~ 56V

2.0% 1.0% 1.0% 1.0%

12 ~ 15V5 ~ 6V

1.0% 1.0% 1.0% 1.0%

1.0% 1.0% 1.0% 1.0%



85 ~ 264VAC 120 ~ 370VDC

47 ~ 63Hz

78% 86% 88% 88%

1.1A/115VAC 0.7A/230VACCOLD START 30A/115VAC 60A/230VAC


Protection type : Constant current limiting, recovers automatically after fault condition is removed6.25 ~ 7.25V


15.6 ~ 18V 31.2 ~ 36V 57.6 ~ 64.8V


Relay contact rating(max.): 30V/1A resistive


-40 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50Component : each along X, Y, Z axes ; Mounting : Compliance to IEC60068-2-610 ~ 500Hz, 2G 10min./1cycle, period for 60min.

301.7K hrs min. MIL-HDBK-217F (25 )

1. All parameters NOT specially mentioned are measured at 230VAC input, r ated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regula tion.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant (12V,24V,48V only)

Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B


Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A



ENVIRONMENT

PROTECTION

SAFETY &

FUNCTION

EMC(Note 4)

WITHSTAND VOLTAGE



40*90*100mm (W*H*D)

0.3Kg; 42pcs/13.6Kg/0.82CUFT

LEAKAGE CURRENT <1mA / 240VAC


I/P-O/P, I/P-FG, O/P-FG:>100M Ohms/500VDC 25 70%RH

Michael.Ott

AKL10011-xx

Michael.Ott

AKL10011-01

Michael.Ott

AKL10011-02

Michael.Ott

AKL10011-03

Michael.Ott

AKL10011-04

file:


Block Diagram

Output Derating Static Characteristics (24V)


Serial-No.

-20 0 10 20 30 45 55 60 70 (VERTICAL)

20

40

60

80

100


LO

AD

(%

)


85 10095 120115 160140 200180 240220 264

90

100

80

70

60

50

40

+

Install DIN rail TS35/7.5 or TS35/15

35

+V +V40

90

-V -V

N L

DC OK

+VADJ

5 5 5 5 5

7.57.5

100

DC OK Relay Contact

Contact Close When the output volta ge reaches the adjusted output voltage.

When the output voltage drop below 90% output voltage.

30V/1A resistive load

Contact Open

Contact Ratings (max.)

DC OK

Unit:mm

CIRCUITDETECTION

O.L.P.

EMIFILTER

&FILTER

POWERSWITCHING

FILTER&

RECTIFIERS +V

DC OK

-VI/P

CONTROL

O.V.P.

O.C.P.

fosc : 60KHz

RECTIFIRE

LOA

D (

%)

40 W Single Output


Michael.Ott

AKL10011-xx

h-j.angenendt

Textfeld

40

Ott GmbH & Co. KG Baarstrasse 3 D-78652 Deisslingen Tel. ++49 7420/9399-0 www.ott-antriebe.de

Seite 83

Ott GmbH & Co. KG Baarstrasse 3 D-78652 Deisslingen Tel. ++49 7420/9399-0 www.ott-antriebe.de

Seite 83

BLDC-/AC-Motoren

Kundenspezifische AC-Motoren

und BLDC-Motoren

Auch mit integrierter Reglung

Leistungen von 1 bis 1880 Watt

Spezielle Produkte mit besonders

hoher Lebensdauer

DKM-Motoren

Synchron- und Asynchronmotoren

mit Schnecken- oder Stirnradge-triebe Leistungen von 15 bis 200 Watt Spannungen von 110 bis 480 VAC

Bürstenbehaftete DC-Motoren

Leistungen von 6 bis 120 Watt Spannungen von 12 bis 90 VDC

Optional mit Bremse, Encoder

oder Tacho

DC-Motoren

Mit Schnecken- oder Stirnradge-

triebe und als Spindelantrieb liefer-bar

Auch getriebelos erhältlich

Leistungen von 0,5 bis 450 Watt

Über 50.000 Motoren vorrätig an

Lager

Hervorragendes Preis-Leistungs

Verhältnis

BLDC-Motoren

BLDC-Motoren mit Schnecken-

oder Planetengetriebe, in unter-schiedlichen Untersetzungen

Auch getriebelos erhältlich

Leistungen von 3 bis 1880 Watt

Nennspanung von 6 bis 72 VDC

Drehzahlen zwischen 0,03 und

40.000 U/min

TX-Motoren

Bürstenbehaftete DC-Motoren mit

Schnecken-, Stirnrad- oder Planeten-getriebe in unterschiedlichen Unter-setzungen

Nennspannungen von 12 bis 24 VDC

Optional mit Bremse, Encoder oder

Tacho

Modifizierte Motoren

Sonderanpassungen auch bei kleinen

Stückzahlen möglich

Auf Wunsch Anbau von Bremse,

Encoder, Tacho, oder Kabelkonfektionen

Aufbau von kompletten Positionierein-

heiten

Steuerungen-Servoregler

Für bürstenlose und bürstenbehaftete

DC-Motoren

Auch programmierbar und mit ver-

schiedenen BUS-Systemen

Elektronische Lastrelais

Übergabemodule und Verdrahtungs-

interface

Zubehör

Mechanische Zusatzkomponenten,

Steckachsen, Kettenräder, Gehäuse-teile

Kundenspezifische Zeichnungsteile

Elektronische Komponenten, Potis,

Anschlusskabel, Stecker, Entstörglie-der

http://www.ott-antriebe.de

http://www.ott-antriebe.de

Ott GmbH & Co. KG

Baarstraße 3

78652 Deißlingen

Tel. 07420 / 9399-0

Email [email protected]

Web www.ott-antriebe.de

Wir kombinieren Elektronik und Mechanik für Sie.

Und das seit 60 Jahren.

Die Ott GmbH & Co. KG bietet als Produktions-, Handels- und Dienstleistungsunternehmen Kom-ponenten und Systeme aus dem Bereich der Antriebstechnik und Elektronik an.

Als Vertretung der Firma Nidec, ehemals SWF, führen wir ein Lager in dem ständig circa 50.000 Motoren und über 1.000 Steuerungen vorrätig gehalten werden. Dies ermöglicht es, schnell auf Ihre Anforderungen zu reagieren. Darüber hinaus bieten wir auch die entsprechenden Steuerun-gen, Kupplungen, Kugelgewindespindeln und Spannungsversorgungen für Motoren an. In unse-rer Fertigung werden kundenspezifische Änderungen an Motoren, wie Wellenbearbeitungen, Auf-bau von Inkrementalgebern, Bremsen, Sondergetriebe und Steckverbindungen realisiert. Diese Sonderfertigungen werden auch bei kleinsten Stückzahlen durchgeführt. Damit können komplette

Systemlösungen nach Ihren Aufgabenstellungen projektiert und gefertigt werden.

Durch die jüngste Produkterweiterung sind Antriebe von ca. 1 Watt bis über 3 Kilowatt lieferbar.

Als weitere Serviceleistung führen wir Reparaturen an Motoren und Regelteilen der Firma Nidec-Valeo bzw. SWF durch.

Documents

bersicht Netzteile AKL - ac-dc-motor.eu€¦ · Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment) ... 1.6A/115V 0.96A/230V