blanco-Seite 2008 - · PDF fileDSLAM OLT. Opternus GmbH Optische Spleiss- & Messtechnik Bahnhofstr. 5 D-22941 Bargteheide ... +1 978 367-5600 Fax: +1 978 367-5700. Title: blanco-Seite_2008.indd

Opternus GmbH Optische Spleiss- & MesstechnikBahnhofstr. 5D-22941 Bargteheide

Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25

Büro Süd:Wäldenbronner Str. 2D-73732 Esslingen

Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009

E-Mail: [email protected] - www.Opternus.de

Simple, affordable triple-play testing over ADSL1/2/2+ and Ethernet10/100 with pass/fail indication

ADSL1/2/2+ service testing at the customer premises, a remoteDSLAM or the central office/exchange

IPTV service assurance using a comprehensive range of QoS metricswhether over ADSL2+ or Ethernet

Unparalleled ease of use for VoIP QoS assurance whether overADSL2+ or Ethernet

Internet connectivity assessment using ping, traceroute and HTTP/FTPspeed testing

Unmatched flexibility, thanks to four modes of operation: ADSL2+termination, ADSL2+ pass through, Ethernet 10/100 termination andEthernet 10/100 pass through

ADSL2+ TRIPLE-PLAY TEST SET

Next-Generation Network Assessment

AXS-200/620part of the SharpTESTER Access Line

NETWORK TESTING—ACCESS


Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25


Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009


AXS-200/620ADSL2+ Triple-Play Test Set

Simplifying ADSL2+ Triple-Play Testing

EXFO’s AXS-200/620 ADSL2+ Triple-Play Test Set offers a quick, yet thorough method for deploying triple-play services—ADSL1/2/2+and Ethernet-based data, VoIP and IPTV testing—facilitated by pass/fail-driven automated tests.

In addition to validating connectivity to the DSLAM, the AXS-200/620 provides upstream and downstream parameters such as actualdata rates, attenuation and noise margin. What’s more, it delivers advanced IPTV measurements—packet jitter, packet loss, PCR jitter,MDI, PID viewer and IGMP zap time—both in Terminate (stand-alone) and Through mode operation. The AXS-200/620 also monitorsresidential VoIP call flow and statistics, facilitating VoIP QoS assurance.

Quick Access to Test Results

The AXS-200/620’s IPTV test summary screen. IP arrival jitter test results. Multilayer fault analysis histogram: a critical partof IPTV testing.

Application-specific LEDs

Common GUI for alltest configurations

Quick-test button

Contextual help

Easy operation. Clear results.A straightforward test solution.


Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25


Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009



Key FeaturesUser-friendliness Displays clear auto-test results with user-definable pass/fail criteria.

Four modes of operation Enables ADSL2+ and 10/100 Mbit/s Ethernet assessment in Terminate and Pass Throughmodes.

IPTV analysis Provides key IPTV qualification parameters with features such as set-top box (STB) emulation,join/leave requests, PCR jitter analysis and PID viewer.

VoIP analysis Ensures VoIP services are not affected by packet loss or jitter.

Data analysis Offers a common set of measures such as ping, traceroute, HTTP speed testing and FTPspeed testing to ensure reliable and consistent Internet connectivity.

MDI reporting Supports media delivery index (RFC 4445) for evaluating the IPTV quality of experience.

Multilayer fault analysis histogram Visually indicates when and at what layer errors are occurring, helping identify the source ofthe problem.

AXS-200 platform modularity Expands with your network and the service test requirements, covering copper/DSL/triple-play,Ethernet and optical applications.

Compatibility with the FTB-8510B The AXS-200/620 is part of EXFO’s core to access IPTV solution providing IPTV faultPacket Blazer Ethernet tester and identification and analysis throughout the network.NQMSpacket monitoring system

AXS-200/620 test locations in the access network.


Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25


Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009



Unmatched Flexibility

Test In, Test OutService providers are used to the “test in, test out” rule of troubleshooting. The AXS-200/620 takes this rule a step further by allowingtechnicians and engineers alike to test outside the customer premises over ADSL1/2/2+ or inside the customer premises over Ethernetto mitigate and remove performance issues. The AXS-200/620 can also conduct the same triple-play testing over ADSL1/2/2+ orEthernet 10/100. This methodology ensures trouble spots are detected and dealt with accordingly and quickly.

ADSL2+ Terminate Mode

In ADSL2+ Terminate mode, the AXS-200/620 synchronizeswith the DSLAM, allowing data analysis (ping, traceroute,HTTP/FTP speed test) and IPTV STB emulation for join/leaverequests.

Assesses service delivery to the customer without gainingaccess to the customer premises

Helps determine if the STB is faulty by issuing IGMPjoins/leaves

Ensures the customer has the required bandwidth(downstream rates)

Ensures the signal-to-noise ratio margin is acceptable

ADSL2+ Pass Through Mode

In ADSL2+ Pass Through mode, the AXS-200/620synchronizes with the DSLAM, allowing data analysis (ping,traceroute, HTTP/FTP speed test), Web surfing from aconnected PC, IPTV STB emulation for join/leave requests,as well as VoIP analysis.

Helps verify if the customer’s modem/router is workingcorrectly

Ensures the STB is correctly negotiating with themiddleware

Assesses the quality of experience by monitoring IPTVjoins/leaves, zap time, jitter and delay

Ensures the bandwidth is sufficient for deliveringtriple-play services

Ensures the signal-to-noise ratio margin is acceptable

Assesses VoIP call flow, jitter, delay

VOICE

ETH

ERN

ET

ADSL2+

DSLAM

DATA

VIDEO

VOICE

ETH

ERN

ET

ADSL2+DATA

VIDEO

DSLAM

AXS-200/620 in ADSL2+ Terminate Mode(STB Emulation)

AXS-200/620 in ADSL2+ Through Mode(DSL Modem Replacement)


Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25


Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009



Ethernet Terminate Mode

In Ethernet Terminate Mode, the AXS-200/620 automaticallysynchronizes with 10/100Base-T ports inside the customerpremises, allowing data analysis (ping, traceroute, HTTP/FTPspeed test) and IPTV STB emulation for join/leave requests.

In this configuration, the AXS-200/620 can be used in xDSL(FTTN), xPON (FTTH) or Ethernet-fed deployments.

Assesses service delivery to the customer over mosttechnologies

Helps determine if the STB is faulty by issuing IGMPjoins/leaves

Assess IPTV and VoIP services

Ethernet Pass Through Mode

In Ethernet Pass Through mode, the AXS-200/620automatically synchronizes with 10/100Base-T ports insidethe customer premises, allowing data analysis (ping,traceroute, HTTP/FTP speed test), Web surfing from aconnected PC, IPTV STB emulation for join/leave requests,as well as VoIP analysis.

In this configuration, the AXS-200/620 can be used in xDSL(FTTN), xPON (FTTH) or Ethernet-fed deployments.

Ensures the STB is correctly negotiating with themiddleware

Assesses the quality of experience by monitoring IPTVjoins/leaves, zap time, jitter and delay

Assesses VoIP call flow, jitter, delay

AXS-200/620 in Ethernet Terminate Mode(STB Emulation)

AXS-200/620 in Ethernet Through Mode(Ethernet Monitoring)

VOICE

ONT

DSL

ETH

ERN

ET

VDSL2 /ADSL2+

DATA

VIDEO

xPON

DSLAM

OLT

VOICE

ONT

DSL

ETH

ERN

ET

VDSL2 /ADSL2+

xPON

DATA

VIDEO

DSLAM

OLT


Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25


Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009



Facilitating Troubleshooting Operations

An Essential Tool for DSL Service Providers and ContractorsThe AXS-200/620 is the optimal tool for DSL service verification and triple-play testing. It helps telco and contractor personnel to quicklyand easily identify the reason for DSL and triple-play deployment failure using automatic testing with customer-adjustable pass/fail criteria.In addition, network operators appreciate the AXS-200/620 as it eliminates the guesswork in hunting down DSL service faults or IPTVquality of experience issues that might otherwise tie up valuable staff and company resources—a real CAPEX and OPEX saver.

IPTV and Triple-Play DeploymentsFor many telcos, the roll out of Internet services over ADSL1/2/2+ has gone quite smoothly. However, IPTV is another story. EXFO’sAXS-200/620 offers comprehensive IPTV and VoIP testing over ADSL1/2/2+ but also over 10/100Base-T Ethernet to ensure thecustomer experience is excellent. From outside or inside the customer premises, the AXS-200/620 has you covered.

Multilayer Fault AnalysisThe essence of the AXS-200/620 is to assist service providers in determining why the service is not working correctly. By analyzing theDSL physical layer, the technician can see whether the DSL data rates seen at the customer premises are high enough to support allthree services making up triple-play: data, voice and video. If the rates are too low or the noise margin is questionable, there is likelysomething wrong with the local loop.

Moving up the protocol stack, the AXS-200/620 provides ease of use and result interpretation for data services using measurementtechniques such as ping, traceroute, HTTP and FTP speed testing. VoIP and IPTV applications are analyzed to determine if the problemslie at the customer premises, the local loop, the DSLAM or at the soft switch or video head-end respectively.


Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25


Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009



IPTV-OVER-DSL/ETHERNET TESTING SUITE

Physical-layer support ADSL1/2/2+Ethernet 10/100

Recognized video compression/standards MPEG2, MPEG4 part 2 and 10(H.264/AVC), WM9

Video streaming control Video streaming (channels) detectionIGMP joins/leaves

Operation Through mode or stand-alone with STB IGMP emulationAnalysis and statistics ADSL, ATM, IP layer analysis

Bandwidth usage per channelIGMP packetsSet-top box (STB) trafficKey IP video QoS parameters: packet loss, packet jitter, zap timePCR jitter, PID statisticsMedia delivery index (MDI) (option)QoS pass/fail indicators

Graphic results Bandwidth usage and multilayer fault analysis histogramIP packet and PCR jitter histograms

VoIP-OVER-DSL/ETHERNET ANALYSIS SUITE (VoIP TESTING)Signaling protocols Session initiation protocol (SIP) v2 (RFC)

Media gateway control protocol (MGCP)Skinny client control protocol (SCCP)

Operation Through mode over DSL and 10/100 EthernetCall monitoring/analysis ADSL, ATM, IP layer call statistics

Gateway/ATA initializationCall flowCodec indicator (G.711, G.729, G.726, G.723)Key VoIP QoS parameters: packet loss, packet jitterQoS pass/fail indicators

Graphic results Delay distribution, jitter histogram

DATA ANALYSIS MODELayer 1/2 support ADSL2+ and Ethernet (stand-alone and Through mode)Login format Username and password using PAP and/or CHAPIP options Routing functionality, NAT, DNS supportPing Pings another device on the network

Device: gateway, destination IP address or URLConfigurable number of pings (1 to 99)Packet size: 32 to 1500 bytes (32 is default)Results: indicate packet size, packets sent/received, minimum/average/maximum round-trip times in milliseconds (ms)

Traceroute Determines the path used to reach device on the networkTimeout in secondsTime to live (TTL) (default is 100 ms, maximum is 5 s)Packet size: 32 bytesNumber of hops: 1 to 30 (default is 30)Results indicate IP address of hop and round-trip time in milliseconds (ms)

HTTP speed test Downloads a Web page and indicates speed of downloadAddress: IP or URLProtocol: HTTP

FTP speed test FTP upload, FTP download or bothDisplays speed to upload and/or download a file

ADSL2+ ATU-R MODULEChipset ConexantStandards Annex A option (over POTS):

ITU-T G.992.5 (ADSL2+), ITU-T G.992.3 (ADSL2 and RE-ADSL), ITU-T G.992.1 (G.DMT) and ANSI T1.413Issue 2Annex B option (over ISDN):ITU-T G.992.5 (ADSL2+), ITU-T G.992.3 (ADSL2 and RE-ADSL), ITU-T G.992.1 (G.DMT)

Rates supported Downstream: up to 24 Mbit/sUpstream: up to 1.3 Mbit/s

Measurements Maximum bit ratesActual bit ratesMode: Fast, InterleavedLatency capacitySignal-to-noise ratio (SNR) marginOutput powerAttenuationCarrier load (bits/bin)ATM F4 and F5 OAM loopback

Link errors FEC, CRC, HECBits/bin Graphical displayEncapsulation methods PPPoE (RFC 2516), RFC 2684 supporting bridged Ethernet (IPoE), IPoA (RFC 1577), PPPoA/LLC

and PPPoA/VC-MUX (RFC 2364)

STANDARD ACCESSORIESHand strap, Certificate of ComplianceACC-RJTC: RJ-45 to telco clip (test cable), or ACC-RJMM: RJ-45 to 4 mm plugs with crocodile clips (test cable)ACC-RJRJ: RJ-45 Ethernet cable

SPECIFICATIONS


Tel. +49(0)4532-20 44-0Fax +49(0)4532-20 44-25


Tel. +49(0)711-3 10 59 99-0Fax +49(0)711-3 10 59 99-99

überreicht durch:

©O

pter

nus

Gm

bHJuli

2009


SPAXS200/6204AN © 2009 EXFO Electro-Optical Engineering Inc. All rights reserved. Printed in Canada 09/07


ORDERING INFORMATION

ModelAXS-620 = ADSL2+ triple-play module

DSL moduleADSL2+A = ADSL2+ triple-play module (Annex A)ADSL2+B = ADSL2+ triple-play module (Annex B)

Example: AXS-620-ADSL2+A-TPP-BUNDLE

AXS-620-XX-XX

Note

a. Available only if TPP-BUNDLE is selected.

DSL software options00 =Without software upgradeMDI = Media delivery index a

ADSL2+AB = ADSL2+ Annex A and ADSL2+ Annex BTPP-BUNDLE = Triple-play bundle (IPTV, VoIP and data analysis support)

EXFO is certified ISO 9001 and attests to the quality of these products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no responsibility forany errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices. In addition, all of EXFO’s manufacturedproducts are compliant with the European Union’s WEEE directive. For more information, please visit www.EXFO.com/recycle. Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.

For the most recent version of this spec sheet, please go to the EXFO website at http://www.EXFO.com/specs

In case of discrepancy, the Web version takes precedence over any printed literature.

EXFO Corporate Headquarters > 400 Godin Avenue, Quebec City (Quebec) G1M 2K2 CANADA | Tel.: +1 418 683-0211 | Fax: +1 418 683-2170 | [email protected]

Toll-free: +1 800 663-3936 (USA and Canada) | www.EXFO.com

EXFO America 3701 Plano Parkway, Suite 160 Plano, TX 75075 USA Tel.: +1 800 663-3936 Fax: +1 972 836-0164EXFO Asia 151 Chin Swee Road, #03-29 Manhattan House SINGAPORE 169876 Tel.: +65 6333 8241 Fax: +65 6333 8242EXFO China Beijing New Century Hotel Office Tower, Room 1754-1755 Beijing 100044 P. R. CHINA Tel.: +86 (10) 6849 2738 Fax: +86 (10) 6849 2662

No. 6 Southern Capital Gym RoadNo. 88 Fuhua First Road Shenzhen 518048 P. R. CHINA Tel.: +86 (755) 8203 2300 Fax: +86 (755) 8203 2306Central Tower, Room 801, Futian District

EXFO Europe Omega Enterprise Park, Electron Way Chandlers Ford, Hampshire S053 4SE ENGLAND Tel.: +44 2380 246810 Fax: +44 2380 246801EXFO Service Assurance 285 Mill Road Chelmsford, MA 01824 USA Tel.: +1 978 367-5600 Fax: +1 978 367-5700

Documents

blanco-Seite 2008 - · PDF fileDSLAM OLT. Opternus GmbH Optische Spleiss- & Messtechnik Bahnhofstr. 5 D-22941 Bargteheide ... +1 978 367-5600 Fax: +1 978 367-5700. Title: blanco-Seite_2008.indd