112

Lenntech...Lenntech [email protected] Tel. +31-152-610-900 Fax. +31-152-616-289 [email protected] Tel. +31-152-610-900 …

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


Reverse Osmosis Membrane Elements . . . . . . . . . . . . . . . . . . . SECTION 1AXEON HF1 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 – 2AXEON HF4 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 – 4AXEON HF5 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 – 6AXEON HF6 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 – 8AXEON HR3 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 – 10

Nanofiltration Membranes . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION 2AXEON NF3 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 – 2AXEON NF4 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 – 4

Sanitary Membranes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION 3AXEON SAN1 – Series Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 2

Residential Membranes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION 4AXEON TF – Series Residential Membrane Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 – 2

Membrane Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION 5 AXEON SS – Series Membrane Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 – 2AXEON FRP – Series Membrane Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 – 4AXEON Residential Membrane Housings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 – 6

Membrane Cleaning Chemicals . . . . . . . . . . . . . . . . . . . . . . . SECTION 6AXEON C – 10 Series Membrane Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – 2AXEON C – 20 Series Membrane Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – 3AXEON M – 100 Membrane Preservative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – 4

Antiscalants and Antifoulants SECTION 7AXEON S – 200 Membrane Antiscalant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 – 2AXEON S – 200C Membrane Antiscalant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 – 3AXEON F – 25 Membrane Antifoulant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 – 4

Carbon Cartridges SECTION 8AXEON CBF – Series Carbon Filter Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 – 2

Sediment Filter Cartridges SECTION 9AXEON SDF – Series Sediment Filter Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 – 2

Inline Cartridges SECTION10AXEON ILF – Series Inline Filter Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 – 2

Refillable Cartridges SECTION11AXEON RFF – Series Refillable Filter Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 – 2AXEON REF – Series Refillable Filter Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 – 4

Foodservice Cartridges SECTION12AXEON QCS – Series QuickChange™ Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 – 2


ii

About AXEON® Water TechnologiesAXEON® Water Technologies, the leading manufacturer of commercial and industrial membrane systems in North America,

offers systems, membranes, cartridges, housings and chemicals. By offering cost-effective solutions that yield high quality

performance and dependability, AXEON has earned the trust and respect of industry professionals and customers in more

than 80 countries around the globe.

Media and Resin Cartridges SECTION13AXEON MIR – Series Mixed Bed DI Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 – 2

Bag Filters SECTION14AXEON Standard Felt Filter Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 – 2

Filter Housings SECTION15AXEON Big Grey Cartridge Housings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 – 2AXEON Slim Line Cartridge Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 – 4AXEON GF – Series Bag Filter Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 – 6

Brackets and Clips SECTION16AXEON Brackets and Clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 – 2

Ultraviolet UV Disinfection Sterilizers SECTION17Viqua Ultraviolet Sterilizers Pre / Post Treatment Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 – 2

Pumps for RO and Water Treatment Systems SECTION18Grundfos Scala2–Series Delivery Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 – 2

Storage Tanks SECTION19P.A.E. Metal Bladder Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 – 2ROmate Fiberglass Bladder Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 – 3AXEON Atmospheric Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 – 4

Shut–Off Float Valves SECTION20Big Switch® Float Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 – 2

Check Valves and Flow Restrictors SECTION21AXEON Capillary Flow Restrictors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 – 2AXEON Stainless Steel Needle Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 – 3

Flow Meters SECTION22AXEON Panel Mount Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 – 2AXEON Inline Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 – 4

Pressure Gauges SECTION23AXEON Back Mount Pressure Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 – 2AXEON Bottom Mount Pressure Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 – 4

Solenoid Valves SECTION24ASCO 212 – Series Solenoid Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 – 2AXEON GC – Series Solenoid Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 – 3


Notes

iii


1 - 1


HF1 – Series Membrane Elements

AXEON HF1 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results. They provide increased production,

high rejection rates and low energy consumption

by operating at low applied pressures.

Benefits� All Industry Standard Sizes

� Low Energy with High Flow Rates

� Improved RO System Performance

� Superior Quality and Cost Savings

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

1 - 2


MKTF-133-E AXEON is a registered trademark of AXEON Water Technologies. 05/17 ©2017 AXEON Water Technologies

AXEON HF1 – Series Membrane Elements are one of the industry’s most reliable and highest performing reverse osmosis membrane

elements. AXEON HF1 – Series Membrane Elements are available in all standard commercial sizes and feature a protective ABS shell.

Advanced membrane technology and manufacturing processes ensure high quality and performance. All elements are shipped dry for

an indefinite shelf life, easier handling, and a lighter shipping weight. AXEON HF1 – Series Membrane Elements are 100% vacuum

integrity tested and may also be ordered as individually wet tested.

Operating Limits� Membrane Type: Polyamide Thin – Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 600 / 41� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 13� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

� Maximum Feed Flow Rate (gpm): 2.5” = 6

4.0” = 14

Product Specifications

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

200374 HF1 – 2514 150 / 10.34 225 / 0.85 99.00

200375 HF1 – 2521 150 / 10.34 400 / 1.51 99.00

200376 HF1 – 2540 150 / 10.34 850 / 3. 99.00

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

200377 HF1 – 4014 150 / 10.34 600 / 2.27 99.00

200378 HF1 – 4021 150 / 10.34 1000 / 3.79 99.00

200379 HF1 – 4040 150 / 10.34 2500 / 9.46 99.00

All 2514, 2521 and 2540 elements fit nominal 2.50” I.D. membrane housings and all 4014, 4021 and 4040 elements fit nominal 4.00” I.D. membrane housings.

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Minimum salt rejection is 96%. Permeate flows for warranty evaluation may vary +/-20%. Maximumpressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

HF1 – 2514 14 / 355.60 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF1 – 2521 21 / 533.40 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF1 – 2540 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

Description A B C D

HF1 – 4014 14 / 355.60 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF1 – 4021 21 / 533.40 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF1 – 4040 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

1 - 3

HF1 – Series Membrane Elements


HF4 – Series Membrane Elements

AXEON HF4 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results. They provide increased production,

high rejection rates and extra low energy consumption

by operating at low applied pressures.

Benefits� All Industry Standard Sizes

� Extra Low Energy with

High Flow Rates

� Improved RO System Performance

� Superior Quality and Cost Savings

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

1 - 4


MKTF-134-C AXEON is a registered trademark of AXEON Water Technologies. 06/16 ©2016 AXEON Water Technologies

HF4 – Series Membrane ElementsAXEON HF4 – Series Membrane Elements are one of the industry’s most reliable and highest performing reverse osmosis membrane

elements. AXEON HF4 – Series Membrane Elements are available in all standard commercial sizes and feature a protective ABS shell.

Advanced membrane technology and manufacturing processes ensure high quality and performance. All elements are shipped dry for

an indefinite shelf life, easier handling, and a lighter shipping weight. AXEON HF4 – Series Membrane Elements are 100% vacuum

integrity tested and may also be ordered as individually wet tested.

Operating Limits� Membrane Type: Polyamide Thin – Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 600 / 41� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 13� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

� Maximum Feed Flow Rate (gpm): 2.5” = 6

4.0” = 14

Product Specifications

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

200386 HF4 – 2514 100 / 6.89 225 / 0.85 99.00

200387 HF4 – 2521 100 / 6.89 400 / 1.51 99.00

200388 HF4 – 2540 100 / 6.89 850 / 3.22 99.00

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

200389 HF4 – 4014 100 / 6.89 600 / 2.27 99.00

200390 HF4 – 4021 100 / 6.89 1000 / 3.79 99.00

200391 HF4 – 4040 100 / 6.89 2500 / 9.46 99.00

All 2514, 2521 and 2540 elements fit nominal 2.50” I.D. membrane housings and all 4014, 4021 and 4040 elements fit nominal 4.00” I.D. membrane housings.

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Minimum salt rejection is 96%. Permeate flows for warranty evaluation may vary +/-20%. Maximumpressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

HF4 – 2514 14 / 355.60 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF4 – 2521 21 / 533.40 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF4 – 2540 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

Description A B C D

HF4 – 4014 14 / 355.60 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF4 – 4021 21 / 533.40 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF4 – 4040 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

1 - 5


HF5 – Series Membrane Elements

AXEON HF5 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results. They provide increased production,

high rejection rates and ultra low energy consumption

by operating at low applied pressures.

Benefits� All Industry Standard Sizes

� Ultra Low Energy with High Flow Rates

� Improved RO System Performance

� Superior Quality and Cost Savings

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

1 - 6


MKTF-135-D AXEON is a registered trademark of AXEON Water Technologies. 06/16 ©2016 AXEON Water Technologies

HF5 – Series Membrane ElementsAXEON HF5 – Series Membrane Elements are the only elements on the market that operate at a pressure of only 80 psi. AXEON

HF5 – Series Membrane Elements are available in all standard 2.5 – inch and 4 – inch commercial sizes and feature a tape – wound

exterior. AXEON HF5 – Series Membrane Elements are the best choice to counter the negative effects of cold water temperatures on

reverse osmosis production. All elements are shipped dry for an indefinite shelf life, easier handling, and a lighter shipping weight.

AXEON HF5 – Series Membrane Elements are 100% vacuum integrity tested and may also be ordered as individually wet tested.

Operating Limits� Membrane Type: Polyamide Thin – Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 400 / 27.58� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 13� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

� Maximum Feed Flow Rate (gpm): 2.5” = 6

4.0” = 14

Product Specifications

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

208125 HF5 – 2514 80 / 5.52 225 / 0.85 98.50

208083 HF5 – 2521 80 / 5.52 400 / 1.51 98.50

208084 HF5 – 2540 80 / 5.52 850 / 3.22 98.50

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

200392 HF5 – 4014 80 / 5.52 600 / 2.27 98.50

200393 HF5 – 4021 80 / 5.52 1000 / 3.79 98.50

200394 HF5 – 4040 80 / 5.52 2500 / 9.46 98.50

All 2514, 2521 and 2540 elements fit nominal 2.50” I.D. membrane housings and all 4014, 4021 and 4040 elements fit nominal 4.00” I.D. membrane housings.

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Minimum salt rejection is 96%. Permeate flows for warranty evaluation may vary +/-20%. Maximumpressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

HF5 – 2514 14 / 355.60 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF5 – 2521 21 / 533.40 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF5 – 2540 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

Description A B C D

HF5 – 4014 14 / 355.60 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF5 – 4021 21 / 533.40 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF5 – 4040 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

1 - 7


HF6 – Series Membrane Elements

AXEON HF6 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results. They provide increased production,

superior rejection rates and low energy consumption

while operating at low applied pressures.

Benefits� High Boron Reduction

� Available in all Industry Standard Sizes

� Low Energy with High Rejection Rates

� Improved RO System Performance and Water Quality

� Individually Inspected, Qualified and Vacuum Tested

� Customization Available

1 - 8


MKTF-470-A AXEON is a registered trademark of AXEON Water Technologies. 06/17 ©2017 AXEON Water Technologies

HF6 – Series Membrane ElementsAXEON HF6 – Series Membrane Elements are one of the industry’s most superior performing reverse osmosis membrane elements.

AXEON HF6 – Series Membrane Elements are available in all standard 2.5 inch and 4.0 inch commercial sizes and feature a tape

wound exterior. Advanced membrane technology and manufacturing processes ensure high quality and superior performance. All

elements are shipped dry for an indefinite shelf life, easier handling and a lighter shipping weight. AXEON HF6 – Series Membrane

Elements are 100% vacuum integrity tested.

Operating Limits� Membrane Type: Polyamide Thin – Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 600 / 41� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 13� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

� Maximum Feed Flow Rate (gpm): 2.5” = 6

4.0” = 14

Product Specifications

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

210475 HF6 – 2514 150 / 10.34 225 / 0.85 99.40

210474 HF6 – 2521 150 / 10.34 400 / 1.51 99.40

210316 HF6 – 2540 150 / 10.34 850 / 3.22 99.40

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

210473 HF6 – 4014 150 / 10.34 600 / 2.27 99.40

210472 HF6 – 4021 150 / 10.34 1000 / 3.79 99.40

210317 HF6 – 4040 150 / 10.34 2500 / 9.46 99.40

All 2514, 2521 and 2540 elements fit nominal 2.50” I.D. membrane housings and all 4014, 4021 and 4040 elements fit nominal 4.00” I.D. membrane housings.

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Minimum salt rejection is 99%. Permeate flows for warranty evaluation may vary +/-20%. Maximumpressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

HF6 – 2514 14 / 355.60 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF6 – 2521 21 / 533.40 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HF6 – 2540 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

Description A B C D

HF6 – 4014 14 / 355.60 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF6 – 4021 21 / 533.40 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HF6 – 4040 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

1 - 9


HR3 – Series Membrane Elements

AXEON HR3 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results. Water treatment professionals have come to

rely on the superior performance and dependability of

AXEON HR3 – Series Membrane Elements.

Benefits� All Industry Standard Sizes

� High Rejection Rates

� Improved RO System Performance

� Superior Quality and Cost Savings

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

1 - 10


MKTF-136-D AXEON is a registered trademark of AXEON Water Technologies. 06/16 ©2016 AXEON Water Technologies

HR3 – Series Membrane ElementsAXEON HR3 – Series Membrane Elements are one of the industry’s most reliable and highest performing reverse osmosis membrane

elements. AXEON HR3 – Series Membrane Elements are available in all standard commercial sizes and feature a protective ABS shell.

Advanced membrane technology and manufacturing processes ensure high quality and performance. All elements are shipped dry for

an indefinite shelf life, easier handling, and a lighter shipping weight. AXEON HR3 – Series Membrane Elements are 100% vacuum

integrity tested and may also be ordered as individually wet tested.

Operating Limits� Membrane Type: Polyamide Thin – Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 600 / 41� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 13� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

� Maximum Feed Flow Rate (gpm): 2.5” = 6

4.0” = 14

Product Specifications

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

200368 HR3 – 2514 225 / 15.51 150 / 0.57 99.50

200369 HR3 – 2521 225 / 15.51 250 / 0.95 99.50

200370 HR3 – 2540 225 / 15.51 650 / 2.46 99.50

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate

(gpd / m3/d)

Nominal SaltRejection

(%)

200371 HR3 – 4014 225 / 15.51 400 / 1.51 99.50

200372 HR3 – 4021 225 / 15.51 900 / 3.41 99.50

200373 HR3 – 4040 225 / 15.51 2200 / 8.33 99.50

All 2514, 2521 and 2540 elements fit nominal 2.50” I.D. membrane housings and all 4014, 4021 and 4040 elements fit nominal 4.00” I.D. membrane housings.

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Minimum salt rejection is 97%. Permeate flows for warranty evaluation may vary +/-20%. Maximumpressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

HR3 – 2514 14 / 355.60 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HR3 – 2521 21 / 533.40 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

HR3 – 2540 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

Description A B C D

HR3 – 4014 14 / 355.60 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HR3 – 4021 21 / 533.40 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

HR3 – 4040 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

1 - 11


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


NF3 – Series Membrane Elements

AXEON NF3 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results. Water treatment professionals have come to

rely on the superior performance and dependability of

AXEON NF3 – Series Membrane Elements.

Benefits� All Industry Standard Sizes

� Nanofiltration Membrane Elements

� Improved RO System Performance

� Superior Quality and Cost Savings

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

2 - 2


MKTF-137-D AXEON is a registered trademark of AXEON Water Technologies. 06/16 ©2016 AXEON Water Technologies

NF3 – Series Membrane ElementsAXEON NF3 – Series Membrane Elements are ideal for removing a high percentage of TOC and THM precursors with medium to

high salt passage and medium hardness passage. AXEON NF3 – Series Membrane Elements are an ideal choice for surface water

and ground water where good organic removal is desired with partial softening.

Operating Limits� Membrane Type: Polyamide Thin – Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 600 / 41� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 12� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

� Maximum Feed Flow Rate (gpm): 2.5” = 6

4.0” = 16

Product Specifications

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate (gpd / m3/d)

Nominal SaltRejection(%)

200401 NF3 – 2514 70 / 4.83 200 / 0.76 40 – 50

200402 NF3 – 2521 70 / 4.83 350 / 1.33 40 – 50

200403 NF3 – 2540 70 / 4.83 850 / 3.22 40 – 50

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate (gpd / m3/d)

Nominal SaltRejection(%)

200404 NF3 – 4014 70 / 4.83 400 / 1.51 40 – 50

200405 NF3 – 4021 70 / 4.83 1000 / 3.79 40 – 50

200406 NF3 – 4040 70 / 4.83 2500 / 9.46 40 – 50

All 2514, 2521 and 2540 elements fit nominal 2.50” I.D. membrane housings and all 4014, 4021 and 4040 elements fit nominal 4.00” I.D. membrane housings.

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Permeate flows for warranty evaluation may vary -15% / +50% for 4.0" diameter elements and -20% /+30% for 2.5" diameter elements. Maximum pressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

NF3 – 2514 14 / 355.60 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

NF3 – 2521 21 / 533.40 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

NF3 – 2540 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

Description A B C D

NF3 – 4014 14 / 355.60 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

NF3 – 4021 21 / 533.40 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

NF3 – 4040 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

2 - 3


NF4 – Series Membrane Elements

AXEON NF4 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results. Water treatment professionals have come

to rely on the superior performance and dependability of

AXEON NF4 – Series Membrane Elements.

Benefits� All Industry Standard Sizes

� Nanofiltration Membrane Elements

� Improved RO System Performance

� Superior Quality and Cost Savings

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

2 - 4


MKTF-138-D AXEON is a registered trademark of AXEON Water Technologies. 06/16 ©2016 AXEON Water Technologies

NF4 – Series Membrane ElementsAXEON NF4 – Series Membrane Elements provide high productivity performance while removing a high percentage of salts, nitrate,

iron and organic compounds such as pesticides, herbicides and THM precursors. The low net driving pressure of the AXEON NF4 –

Series Membrane Elements allows the removal of these compounds at low operating pressures.

Operating Limits� Membrane Type: Polyamide Thin-Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 600 / 41� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 12� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

� Maximum Feed Flow Rate (gpm): 2.5” = 6

4.0” = 16

Product Specifications

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate (gpd / m3/d)

Stabilized SaltRejection(%)

200407 NF4 – 2514 70 / 4.83 200 / 0.76 80 – 90

200408 NF4 – 2521 70 / 4.83 250 / 0.95 80 – 90

200409 NF4 – 2540 70 / 4.83 680 / 2.57 80 – 90

All 2514, 2521 and 2540 elements fit nominal 2.50” I.D. membrane housings and all 4014, 4021 and 4040 elements fit nominal 4.00” I.D. membrane housings.

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Permeate flows for warranty evaluation may vary -15% / +50% for 4.0" diameter elements and -20% /+30% for 2.5" diameter elements. Maximum pressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

NF4 – 2514 14 / 355.60 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

NF4 – 2521 21 / 533.40 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

NF4 – 2540 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 2.40 / 60.96

Description A B C D

NF4 – 4014 14 / 355.60 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

NF4 – 4021 21 / 533.40 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

NF4 – 4040 40 / 1016.00 1.1 / 27.94 0.75 / 19.05 3.95 / 100.30

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate (gpd / m3/d)

Stabilized SaltRejection(%)

200410 NF4 – 4014 70 / 4.83 400 / 1.51 80 – 90

200411 NF4 – 4021 70 / 4.83 950 / 3.60 80 – 90

200412 NF4 – 4040 70 / 4.83 2000 / 7.60 80 – 90

2 - 5


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


SAN1 – Series Membrane Elements

AXEON SAN1 – Series Membrane Elements are manufactured using the industry’s leading

membrane film technology. These membranes offer reliability, high performance

and deliver consistent results for medical applications and sanitary uses.

Water treatment professionals have come to rely on the superior

performance and dependability of

AXEON SAN1 – Series Membrane Elements.

Benefits� High Rejection Rates

� Superior Quality and Cost Savings

� Full–Fit Design

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

3 - 2


MKTF-453-A AXEON is a registered trademark of AXEON Water Technologies. 05/17 ©2017 AXEON Water Technologies

SAN1 – Series Membrane ElementsAXEON SAN1 – Series Membrane Elements are 4.6 inch diameter reverse osmosis elements that offer high purity water for sanitaryapplications, using the industry’s leading film technology membrane, which offers excellent salt rejection and permeate flow. Theseelements are made with the same high quality materials of construction as our other AXEON Membrane Elements used in commercialsystems.

Operating Limits� Membrane Type: Polyamide Thin – Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 600 / 41� pH Range, Continuous Operation*: 2 – 11

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

� pH Range, Short Term Cleaning (30 Min.): 1 – 13� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0

Product Specifications

Part Number DescriptionApplied Pressure(psi / bar)

Permeate Flow Rate (gpd / m3/d)

Nominal Salt Rejection(%)

210162 SAN1 – 4611 225 / 15.51 1,200 / 4.54 99

210163 SAN1 – 4619 225 / 15.51 1,450 / 5.49 99

210164 SAN1 – 4641 225 / 15.51 5,200 / 19.68 99

Proper start – up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Before initiatingsystem start – up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.

Avoid any abrupt pressure or cross – flow variations on the spiral elements during start – up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start – up, a gradual changefrom a standstill to operating state is recommended as follows:� Feed pressure should be increased gradually over a 30 – 60 second time frame. � Cross – flow velocity at set operating point should be achieved gradually over 15 – 20 seconds.� Permeate obtained from first hour of operation should be discarded. � Maximum pressure drop across an entire pressure vessel (housing) is 30 psi / 2.1 bar.� Avoid static permeate – side backpressure at all times.

Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturerrecommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.

Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.

If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatible chemicals andlubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: please check the applicationstatus before use and sale. The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the completesystem design and on the operation and maintenance of the system.

No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposal practices are in compliancewith applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation or liability for the information in thisdocument. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 2,000 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, and the following recovery rates: SAN1 – 4611 – 5%, SAN1 – 4619 – 8%, SAN1 – 4641 – 15% and the specified operating pressure. Minimum saltrejection is 98%. Permeate flows for warranty evaluation may vary +/-20%. Maximum pressure drop at 13 psig / 0.9 bar.

Dimensions inch / mm:Description A B C D

SAN1 – 4611 11.32 / 287.53 — 0.75 / 19.05 4.61 / 117

SAN1 – 4619 19.20 / 487.68 — 0.75 / 19.05 4.61 / 117

SAN1 – 4641 41.31 / 1,049 2.19 / 56 0.75 / 19.05 4.61 / 117

3 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


TF – Series Residential Membrane Elements

AXEON TF – Series Residential Membrane Elements are recognized as one

of the industry’s most reliable and highest performing membrane elements

that deliver consistent quality and performance. Advanced manufacturing

processes and utilization of the industry’s leading film technology

allows these elements to deliver consistent results that

equipment suppliers and water treatment dealers

have come to rely on.

AXEON residential membranesoperate as low as 50 psi and

can yield up to 23% more water thancompetitor’s membranes at 65 psi.

Benefits� All Industry Standard Sizes

� Up to 500 GPD Capacities

� Improved RO System Performance

� Superior Quality and Cost Savings

� Individually Inspected, Qualified and Vacuum Tested

� Private Labeling and Customization Available

4 - 2


MKTF-101-E AXEON is a registered trademark of AXEON Water Technologies. 10/16 ©2016 AXEON Water Technologies

AXEON TF – Series Residential Membrane Elements deliver consistent results for higher quality water. All elements are shipped dry

for an indefinite shelf life, easier handling and a lighter shipping weight.

Product Specifications

All TF – 1812 Residential Membrane Elements seal at a standard 2.00 inch – 2.05 inch I.D. within membrane housings.

Under certain conditions, the presence of free chlorine, chloramines and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, themanufacturer recommends removing all oxidizing agents by pretreatment prior to membrane exposure. Please contact the manufacturer or your supplier for more information.

It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use thisinitial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended thatmembrane elements be immersed in a preservative solution. Rinse out the preservative before use. For membrane warranty details, please contact the manufacturer or your supplier for more information.

If operating limits and guidelines given in this product specification sheet are not strictly followed, the warranty will be null and void. The customer is fully responsible for the effects of incompatiblechemicals and lubricants on elements. Use of any such chemicals or lubricants will void the warranty. These membranes may be subject to drinking water application restrictions in some countries: pleasecheck the application status before use and sale. These elements have not been through the French approval process for use in potable water. The use of this product in and of itself does not necessarilyguarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the complete system design and on the operation and maintenance of the system.

No freedom from infringement of any patent owned by the manufacturer or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may changewith time, customer is responsible for determining whether products and the information in this document are appropriate for customer’s use and for ensuring that customer’s workplace and disposalpractices are in compliance with applicable laws and other governmental enactments. The claims made may not have been approved for use in all countries. The manufacturer assumes no obligation orliability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

200357 TF – 1812 – 25 50 / 3.40 25 / 3.94 98

200358 TF – 1812 – 35 50 / 3.40 35 / 5.52 98

200359 TF – 1812 – 50 50 / 3.40 50 / 7.88 98

200360 TF – 1812 – 75 50 / 3.40 75 / 11.83 98

200361 TF – 1812 – 100 60 / 4.13 100 / 15.77 98

200362 TF – 1812 – 150 65 / 4.48 150 / 23.66 98

208795 TF – 1812 – 200 65 / 4.48 200 / 31.50 92

208802 TF – 3012 – 500 70 / 4.80 500 / 78.86 98

PartNumber

DescriptionAppliedPressure(psi / bar)

PermeateFlow Rate(gpd / lph)

NominalRejection

(%)

Dimensions (in / mm)

TF – 1812 – 25 11.75 / 298.45 10.00 / 254.00 0.86 / 21.84 0.88 / 22.35 1.77 / 45.08

TF – 1812 – 35 11.75 / 298.45 10.00 / 254.00 0.86 / 21.84 0.88 / 22.35 1.77 / 45.08

TF – 1812 – 50 11.75 / 298.45 10.00 / 254.00 0.86 / 21.84 0.88 / 22.35 1.77 / 45.08

TF – 1812 – 75 11.75 / 298.45 10.00 / 254.00 0.86 / 21.84 0.88 / 22.35 1.77 / 45.08

TF – 1812 – 100 11.75 / 298.45 10.00 / 254.00 0.86 / 21.84 0.88 / 22.35 1.77 / 45.08

TF – 1812 – 150 11.75 / 298.45 10.00 / 254.00 0.86 / 21.84 0.88 / 22.35 1.77 / 45.08

TF – 1812 – 200 11.75 / 298.45 10.00 / 254.00 0.86 / 21.84 0.88 / 22.35 1.77 / 45.08

TF – 3012 – 500 11.75 / 298.45 10.00 / 254.00 0.79 / 20.00 0.75 / 19.05 2.95 / 74.93

Description A B C D E

* Maximum temperature for continuous operations above pH10 is 95°F / 35°C.

Warranty Evaluation Test Conditions: Permeate flow and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water,77°F / 25°C, 15% recovery and the specified operating pressure. Minimum salt rejection is 96%. Permeate flows for warranty evaluation may vary +/-20%. Maximumpressure drop at 13 psi / 0.9 bar.

� pH Range, Continuous Operation*: 2 – 11� Maximum Feed Silt Density Index (SDI): 5 � Chlorine / Chloramine Tolerance (ppm): 0 � Maximum Feed Flow Rate (gpm): 2

Operating Limits� Membrane Type: Polyamide Thin–Film Composite� Maximum Operating Temperature (°F / °C): 113 / 45� Maximum Operating Pressure (psi / bar): 150 / 10� Maximum Feed Flow Rate (gpm / lpm): 2 / 7.60

TF – Series Residential Membrane Elements

4 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


SS – Series Membrane Housings

AXEON SS – Series Stainless Steel Membrane Housings are for durable, long–term use in

typical commercial reverse osmosis, nanofiltration and ultrafiltraion water treatment

systems at pressures up to 250 psi. AXEON SS – Series Membrane Housings are

seamless and accommodate all standard size membrane elements and feature

a True – Clamp™ Integrated Clamping System for added security.

Benefits� Fits All Standard Sized Membrane Elements

� Some Sizes Available in 316L

� High Resistance to Climate Conditions

� Adapters, Interconnectors and Mounting Clamps Available

� 1–Year Limited Warranty

5 - 2


MKTF-140-E AXEON is a registered trademark of AXEON Water Technologies. 04 /17 ©2017 AXEON Water Technologies

AXEON SS – Series Membrane Housings feature a 304L or 316L corrosion resistant stainless steel and

end entry single piece nylon connections that are able to withstand

high pressures. AXEON SS – Series Membrane Housings are

designed with a seamless 1.80 mm thick housing body

and Buna–N double o–rings for sealing integrity.

Operating Limits� Maximum Operating Pressure (psi / bar): 250 / 17

� Minimum Operating Temperature (°F / °C): 35 / 2

� Maximum Operating Temperature (°F / °C): 120 / 49

� Maximum Feedwater TDS Chlorides: < 250

SS – Series Membrane Housings

2.5” Series

PartNumber

ModelNumber

MaximumPressure(psi)

Numberof

Membranes

MembraneDiameter(in / mm)

MembraneLength

(in / mm)

FeedFNPT (in)

PermeateFNPT (in)

ConcentrateFNPT (in)

208236 SS – 304 –2514 – 250E 250 1 2.50 / 63.50 14.00 / 355.60 3/8 3/8 3/8

208237 SS – 304 – 2521 – 250E 250 1 2.50 / 63.50 21.00 / 533.40 3/8 3/8 3/8

208238 SS – 304 – 2540 – 250E 250 1 2.50 / 63.50 40.00 / 1016 3/8 3/8 3/8

4” Series

PartNumber

ModelNumber

MaximumPressure(psi)

Numberof

Membranes

MembraneDiameter(in / mm)

MembraneLength

(in / mm)

FeedFNPT (in)

PermeateFNPT (in)

ConcentrateFNPT (in)

208239 SS – 304 – 4021 – 250E 250 1 2.50 / 63.50 21.00 / 533.40 1/2 1/2 1/2

208240 SS – 304 – 4040 – 250E 250 1 2.50 / 63.50 40.00 / 10160 1/2 1/2 1/2

208241 SS – 304 – 4040 – 250E 250 1 4.00 / 101.60 40.00 / 1016 3/4 1/2 3/4

208242 SS – 304 – 4080 – 250E 250 2 4.00 / 101.60 80.00 / 2032 3/4 1/2 3/4

208243 SS – 304 – 40120 – 250E 250 3 4.00 / 101.60 120.00 / 3048 3/4 1/2 3/4

208245 SS – 316 – 4040 – 250E 250 1 4.00 / 101.60 40.00 / 1016 1/2 1/2 1/2

208244 SS – 316 – 4040 – 250E 250 1 4.00 / 101.60 40.00 / 1016 3/4 1/2 3/4

5 - 3


FRP – Series Membrane Housings

AXEON FRP – Series Membrane Housings are for continuous long–term use for

reverse osmosis, nanofiltration and ultrafiltration elements which are used on

typical commercial water treatment systems at pressures up to 300 psi. They

feature end entry connections and the True–Lock™ Integrated Locking System,

and demonstrate a higher resistance to various climate conditions, feedwater

conditions and chemicals.

AXEON 2.5” diameter membrane housings are available

in 14”, 21” and 40” lengths, and 4.0” diameter

membrane housings are offered in

14”, 21”, 40”, and 80” lengths.

5 - 4


MKTF-145-D AXEON is a registered trademark of AXEON Water Technologies. 09/16 ©2016 AXEON Water Technologies

AXEON FRP – Series Membrane Housings feature end entry connections, the True–Lock™

Integrated Locking System, and demonstrate a higher resistance to various

climate conditions, feedwater compositions and chemicals.

Features� Fiberglass Construction

� End Entry Connections

� Single Piece ABS End Plugs

� True–Lock™ Integrated Locking System

� High Resistance to Chemicals, such as High Levels of

Chlorides and Climate Conditions

� Easy Removable End Plug for Ease of Installation and Maintenance

� Accommodates All Standard Sized Membrane Elements

� Adapters, Interconnectors and Mounting Clamps Available

Operating Limits� Maximum Operating Pressure (psi / bar): 300 / 21

� Minimum Operating Temperature (°F / °C): 35 / 2

� Maximum Operating Temperature (°F / °C): 150 / 66

FRP – Series Membrane Housings

2.5” Series

PartNumber

ModelNumber

MaximumPressure(psi)

Numberof

Membranes

MembraneDiameter

(inch / mm)

MembraneLength

(inch / mm)

FeedFNPT (inch)

PermeateFNPT (inch)

ConcentrateFNPT (inch)

208421 FRP – 2514 – 300E 300 1 2.50 / 63.50 14.00 / 355.6 1/4 1/4 1/4

208417 FRP – 2521 – 300E 300 1 2.50 / 63.50 21.00 / 533.4 1/4 1/4 1/4

208418 FRP – 2540 – 300E 300 1 2.50 / 63.50 40.00 / 1016 1/4 1/4 1/4

4” Series

PartNumber

ModelNumber

MaximumPressure(psi)

Numberof

Membranes

MembraneDiameter

(inch / mm)

MembraneLength

(inch / mm)

FeedFNPT (inch)

PermeateFNPT (inch)

ConcentrateFNPT (inch)

208416 FRP – 4021 – 300E 300 1 4.00 / 101.60 21.00 / 533.4 1/2 1/2 1/2

208419 FRP – 4040 – 300E 300 1 4.00 / 101.60 40.00 / 1016 3/4 1/2 3/4

208420 FRP – 4080 – 300E 300 2 4.00 / 101.60 80.00 / 2032 3/4 1/2 3/4

5 - 5


Residential Membrane Housings

MKTF-316-C AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

PartNumber

ModelNumber

Number ofMembranes

CaseQuantity

Diameter(in / mm)

Length(in / mm)

FeedFNPT (in)

PermeateFNPT (in)

ConcentrateFNPT (in)

200507 2012 1 24 2.00 / 50.80 12.00 / 304.8 1/8 1/8 1/8

208438 3012 1 20 2.00 / 50.80 12.00 / 304.8 3/8 3/8 3/8

AXEONResidential Membrane Housings

AXEON Residential Membrane Housings are made from high–quality

polypropylene, which offers chemical resistance. This component

will accommodate most standard 12” membrane elements.

Both the ribbed cap and the housing are one piece

injection molded parts. The ribbed cap incorporates

acme square threads and two o–rings to ensure

a leakproof seal.

Benefits

� Test Burst Pressure: 400 psi

� Single O–Ring End Cap Design

� Standard FNPT Molded Threads

� One Piece Injection Molded Cap

and Housing

� Cycle Test: 150,000 Cycles at

150 psi

Operating Limits

� Maximum Operating Pressure (psi / bar): 80 / 5.5

� Minimum Operating Temperature (°F / °C): 35 / 2

� Maximum Operating Temperature (°F / °C): 125 / 52

Product Specifications

5 - 6


C – 10 Series Membrane Cleaner

MKTF-187-C AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

PartNumbers

Description

206716 CHEMICAL, CLEANER, LOW pH, 4 LBS, C – 10, AXEON

206717 CHEMICAL, CLEANER, LOW pH, 25 LBS, C – 10, AXEON

206718 CHEMICAL, CLEANER, LOW pH, 45 LBS, C – 10, AXEON

AXEON C – 10 Series Membrane Cleaner is a lowpH powdered cleaner that gently and effectivelyremoves inorganic scalant such as calcium carbonateand metal hydroxides from the surface of the membrane.Used in a program that includes an alkaline cleaner fororganics and particulate removal, AXEON C – 10Series Membrane Cleaner provides excellent foulantremoval resulting in longer system run times andincreased membrane life expectancy.

Benefits� Readily Dissolvable Powdered Cleaner ProvidesEfficient Shipping and Handling

� Phosphate–Free Formula to Reduce Negative Impacton the Environment

� Buffered pH to Maintain Optimum CleaningPerformance Throughout Cleaning Cycle

Technical SpecificationsLiquid*� Appearance: White Powder

� pH (1% in water): 2.5 – 3.5

Packaging� Powder: 4 Pounds, 25 Pounds, 45 Pounds

* For further details on proper dosage, please refer back to the product label. SDS available upon request.

Mixing and Application Instructions1. Inspect all cleaning system components to include CIP tank,hoses and cartridge filters. Flush or replace if necessary. Fill cleaning tank with reverse osmosis permeate or Dlwater. Turn on agitator or tank recirculation pump.

2. Slowly add C – 10 to cleaning tank (1 pound [0.45 kg] ofC – 10 for every 12 gal [45 L] of water) and mix thoroughly.The solution pH should match product specification. The solution should be heated up to 45°C to improvecleaning efficacy.

3. Circulate solution in the same direction as the feed flow.Typical circulation times are 30 – 90 minutes.† Maximumflow rate per pressure vessel is 40 gpm (152 lpm) for 8 –inch elements and 10 gpm (38 lpm) for 4 – inch elements.Maximum pressure for cleaning is 60 psi (4.2 kg / cm2).

4. In cases of heavy fouling, divert the first 10 – 20% ofcleaning solution to drain to prevent re deposition ofremoved solids.

5. Rinse with reverse osmosis permeate before returningsystem to service. When returning unit to service, divertproduct water to drain until any residual cleaning solutionhas been rinsed from system.

† Depending on the nature of the fouling, a soak period may be necessary for optimum results.

6 - 2


C – 20 Series Membrane Cleaner

MKTF-401-A AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

AXEON C – 20 Series Membrane Cleaner is ahigh pH powdered cleaner that gently and effectivelyremoves organic and other acid insoluble foulants fromthe surface of the membrane. Used in a program thatincludes an acidic cleaner for scale and metalhydroxide removal, AXEON C – 20 SeriesMembrane Cleaner provides excellent foulantremoval resulting in longer system run times andincreased membrane life expectancy.

Benefits� Readily Dissolvable Powdered Cleaner ProvidesEfficient Shipping and Handling

� Phosphate–Free Formula to Reduce Negative Impacton the Environment

� Buffered pH to Maintain Optimum CleaningPerformance Throughout Cleaning Cycle

Technical SpecificationsLiquid*� Appearance: White Powder

� pH (1% in water): 10.5 – 11.0

Packaging� Powder: 4 Pounds, 25 Pounds, 45 Pounds

* For further details on proper dosage, please refer back to the product label. SDS available upon request.

PartNumbers

Description

206719 CHEMICAL, CLEANER, HIGH pH, 4 LBS, C – 20, AXEON

206720 CHEMICAL, CLEANER, HIGH pH, 25 LBS, C – 20, AXEON

206721 CHEMICAL, CLEANER, HIGH pH, 45 LBS, C – 20, AXEON

Mixing and Application Instructions1. Inspect all cleaning system components to include CIP tank,hoses and cartridge filters. Flush or replace if necessary. Fill cleaning tank with reverse osmosis permeate or Dlwater. Turn on agitator or tank recirculation pump.

2. Slowly add C – 20 to cleaning tank (1 pound [0.45 kg] ofC – 20 for every 12 gal [45 L] of water) and mix thoroughly.The solution pH should match product specification. The solution should be heated up to 45°C to improvecleaning efficacy.

3. Circulate solution in the same direction as the feed flow.Typical circulation times are 30 – 90 minutes.† Maximumflow rate per pressure vessel is 40 gpm (152 lpm) for 8 –inch elements and 10 gpm (38 lpm) for 4 – inch elements.Maximum pressure for cleaning is 60 psi (4.2 kg / cm2).

4. In cases of heavy fouling, divert the first 10 – 20% ofcleaning solution to drain to prevent re deposition ofremoved solids.

5. Rinse with reverse osmosis permeate before returningsystem to service. When returning unit to service, divertproduct water to drain until any residual cleaning solutionhas been rinsed from system.

† Depending on the nature of the fouling, a soak period may be necessary for optimum results.

6 - 3


M – 100 Membrane Preservative

MKTF-189-C AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

Part Numbers Description

206722 CHEMICAL, STORAGE, PRESERVATIVE, 4 LBS, M – 100, AXEON

206723 CHEMICAL, STORAGE, PRESERVATIVE, 25 LBS, M – 100, AXEON

206724 CHEMICAL, STORAGE, PRESERVATIVE, 45 LBS, M – 100, AXEON

AXEON M – 100 Membrane Preservative safely controlsmicrobiological growth within membrane elements andmembrane systems during long and short term storage. Itreplaces the use of formaldehyde, sodium metabisulfite andother chemicals that are typically used. While formaldehyde orsodium metabisulfite are either hazardous or unstable, AXEONM – 100 is an effective long term solution and does not createenvironment or health risks. AXEON M – 100 is compatiblewith all membrane types and rinses easily from membranes.AXEON M – 100 Membrane Preservative is packaged asa dry, stable, nonreactive powder for ease of transportation.

Benefits� Allows Membranes to be Stored for Short and ExtendedPeriods without Loss of Performance

� Convenient to Store, Easy to Handle and May beTransported More Economically

� Reliable at Extreme Temperatures and Has an Extended Shelf–Life, Maintaining Product Stability Longterm

� Compatible with Major Manufacturer’s Reverse Osmosis,Nanofiltration and Ultrafiltration Membranes

Technical SpecificationsPowder*� Appearance: White Powder

� pH: 5.5 – 6

Packaging� Powder: 4 Pounds, 25 Pounds, 45 Pounds

* For further details on proper dosage, please refer back to the product label. SDS available upon request.

Dosing RecommendationsMix one pound of AXEON M – 100 MembranePreservative to six gallons of good quality water suchas a reverse osmosis permeate or better. Recirculatesolution for at least 15 minutes. A pressure of less than60 psi is recommended. After recirculation, shut downthe system. Do not allow the AXEON M – 100Membrane Preservative solution to drain from themembranes. The membranes may then be stored in thesystem vessels or they may be removed and stored inseparate containers.

To prevent any form of freezing, make sure to add 20%by weight Glycol at the end of the mixing process.

6 - 4


S – 200 Membrane Antiscalant

MKTF-191-C AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

Part Numbers Description

206712 CHEMICAL, ANTISCALANT, SILICA, 5 GAL, S – 200, AXEON

206713 CHEMICAL, ANTISCALANT, SILICA, 55 GAL, S – 200, AXEON

AXEON S – 200 Membrane Antiscalant is an effectiveantiscalant, specially formulated for feedwater with the highestlevels of metal oxides, silica and scale–forming minerals. It inhibits polymerization of reactive silica and disperses colloidal (non–reactive) silica. It is effective over a wide range ofconcentrations and does not flocculate dissolved polymers such as residual coagulants, iron or aluminum–rich silica. Use of thisproduct is recommended for reducing the operating and capitalcosts of reverse osmosis, nanofiltration and ultrafiltration systems.

Benefits� Inhibits Polymerization and Precipitation of Silica

� Effectively Controls Inorganic Scales Over a Large Concentration Range

� Compatible with Major Manufacturer’s Reverse Osmosis,Nanofiltration, and Ultrafiltration Membranes

� May be Used Diluted or Undiluted

� Effective in Feedwaters with pH Range 5.0 – 10.0

� Particularly Effective for Controlling Coagulation of ColloidalSilica by Aluminum, Iron and Heavy Metal Salts

Technical SpecificationsLiquid*� Appearance: Amber� pH: 1.5 – 2.5� Specific Gravity: 1 – 1.2

Packaging� Liquid: 5 Gallons, 55 Gallons

* For further details on proper dosage, please refer back to the product label. SDS available upon request.

Dosing RecommendationsThe proper dosage of AXEON S – 200 MembraneAntiscalant will vary based on the feedwater analysisand reverse osmosis system recovery. For systemswith less than 100 GPM (gallons per minute)feedwater, a typical dosage range is 4 – 6 ppm. Thequantity of solution to add to the water is dependenton the flowrate of the feedwater along with thecapacity of the chemical pump and the percentoutput setting of the pump.

7 - 2


S – 200C Membrane Antiscalant

MKTF-454-A AXEON is a registered trademark of AXEON Water Technologies. 04/17 ©2017 AXEON Water Technologies

Part Numbers Description

208950 CHEMICAL, ANTISCALANT, CONCENTRATE SILICA, 5 GAL, S – 200C, AXEON210192 CHEMICAL, ANTISCALANT, CONCENTRATE SILICA, 55 GAL, S – 200C, AXEON

AXEON S – 200C Membrane Antiscalant is a highlyeffective antiscalant, specially formulated for feedwater with thehighest levels of metal oxides, silica and scale–forming minerals. Itis effective over a wide range of concentrations, and does notflocculate dissolved polymers such as residual coagulants or ironor aluminum–rich silica. Use of this product is recommended forreducing the operating and capital costs of reverse osmosis (RO),nanofiltration (NF) and ultrafiltration (UF) systems. It inhibitspolymerization of reactive silica, and disperses colloidal (non–reactive) silica.

Benefits� Highly Effective in Retarding Polymerization and Precipitation

of Silica

� Effectively Controls Inorganic Scales Over a Large ConcentrationRange

� Certified Under ANSI/NSF Standard 60 for Drinking WaterProduction

� Compatible with Major Manufacturer’s RO, NF, and UFMembranes

� Does not Flocculate Dissolved Iron/Aluminum Oxide/SilicateComplexes

� May be used Diluted or Undiluted

� Effective in Feedwaters with pH Range 5.0 – 10.0

� Particularly Efficacious for Controlling Coagulation of ColloidalSilica by Aluminum, Iron and Heavy Metal Salts

Technical SpecificationsLiquid*� Appearance: Clear, Colorless Liquid� pH: ≤ 2.0� Specific Gravity: 1.44 ± 0.05

Dosing RecommendationsIn the useful dosage range of 1– 50 ppm,control of a wide range of inorganic scalesalong with reactive and non-reactive silica athigh levels. By monitoring the concentratestream and trend charts, optimal dosage canbe achieved for the control of silica gels andscales which form chemically linked foulantsprone to flocculation with organic materials.

Packaging� Liquid: 5 Gallons (27 kg),

55 Gallons (300 kg)

* For further details on proper dosage, please refer back to the product label. SDS available upon request.

7 - 3


AXEON F – 25 Membrane Antifoulant is a highlyeffective anti–coagulant and antifoulant for allmembrane systems treating feedwaters with highpotential for fouling by silt, organics, colloids and fineparticulates. It controls the coagulation and subsequentmembrane fouling by hydrocarbons, cellulosicmaterials, lignins, parraffins and other organics.

Benefits� Inhibits Coagulation and Deposition of Organic and Inorganic Colloidal Particles

� Reduces Requirements for Membrane Cleaning byDecreasing the Rate of Membrane Fouling

� Effectively Reduces Membrane Fouling WhenProcessing Waters with High SDI Values

� Compatible with Major Manufacturers’ ReverseOsmosis, Nanofiltration and Ultrafiltration Membranes

� Compatible with Simultaneous Administration ofAntiscalants into Feedwaters

Technical SpecificationsLiquid*� Appearance: Clear Liquid� pH: 2 – 2.5� Specific Gravity: 1.012

Packaging� Liquid: 5 Gallons, 55 Gallons

* For further details on proper dosage, please refer back to the product label.SDS available upon request.

F – 25 Membrane Antifoulant

MKTF-188-C AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

Dosing RecommendationsThe proper dosage of AXEON F – 25 Membrane Antifoulant

will vary based on the feedwater analysis and reverseosmosis system recovery. A typical dosage range is 2 – 4 ppm. The quantity of solution to add to the water isdependent on the flowrate of the feedwater along with thecapacity of the chemical pump and the percent output settingof the pump.

Part Numbers Description

206714 CHEMICAL, ANTIFOULANT, 5 GAL, F – 25, AXEON

206715 CHEMICAL, ANTIFOULANT, 55 GAL, F – 25, AXEON

7 - 4


CBF – Series Carbon Filter Cartridges

AXEON CBF – Series Carbon Filter Cartridges are

available in 2.5”and 4.5” diameters and provide an

economical and high quality option for numerous pre–and

post–filtration applications. These carbon blocks feature an

approved design and fit most standard size filter housings.

AXEON CBF – Series Carbon Filter Cartridges feature

acid–washed, high purity coconut–based activated

carbon. The carbon used in these cartridges have been

specifically developed to reduce chlorine, sediments, color,

soluble organic compounds (SOC) and volatile organic

compounds (VOC). With high chlorine reduction, and

reduced carbon particulates or particles, you will soon

make the CBF – Series your carbon block of choice.

AXEON CBF – Series Carbon Filter Cartridges provide

solutions for a variety of uses including point–of–use and

point–of–entry residential and commercial applications.

Benefits� Reduce Odor, Chlorine, SOC’s and VOC’s from Drinking Water*

� Improves Taste

� High Chlorine Removal Capacity

� Utilizes the Industry’s Leading Carbon Filtration Technology*

� High Purity Coconut–Based Carbon

� Standard Nominal Micron Ratings Available

� Superior Quality and Cost Savings

� Certified to NSF Standard 42

� FDA Approved Materials

Tested and Certified by NSF International against ANSI/NSF Standard 42 for material requirements only.

COMPONENT

8 - 2


MKTF-239-E AXEON is a registered trademark of AXEON Water Technologies. 09/16 ©2016 AXEON Water Technologies

CBF – Series Carbon Filter Cartridges2.5” Diameter Specifications

PartNumber Model Diameter

(inches / mm)Length

(inches / mm)MicronRating

CaseQuantity

Box Dimension(inches / mm)

ApproximateWeight bycase (lbs.)

� Filter Media: Acid–Washed Coconut Based Carbon

� End Caps: Polypropylene

� Outer Wrap: Polypropylene

� Inner Wrap: Polypropylene

� Netting: Polypropylene

� Gaskets: Neoprene

� Temperature Range: 40°F to 180°F / 4.4°C to 82.2°C

Technical Data:

* Weights, chlorine capacity, micron rating, pressure drop, percent efficiency and initial P (PSI) @ flow rate tested by manufacturer and independent laboratory.Not performance tested or certified by NSF.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. CBF – Series cartridges will contain a very smallamount of carbon fines (very fine black powder). After installation follow the instructions for flushing the cartridge to remove all traces of the fines before using thewater. You should run (flush) the water in the tap at least 20 seconds prior to using water for drinking or cooking purposes. This is particularly important if the taphas not been used daily.

NOTE: Micron ratings based on 85% or greater removal of given particle size.

200656 CBF – 25 – 1005 2.50 / 6.35 10.00 / 25.40 5 20 15.50 X 10.50 X 12.50 / 39.37 X 26.67 X 31.75 19

200658 CBF – 25 – 1010 2.50 / 6.35 10.00 / 25.40 10 20 15.50 X 10.50 X 12.50 / 39.37 X 26.67 X 31.75 19

200657 CBF – 25 – 2005 2.50 / 6.35 20.00 / 50.80 5 12 21.00 X 9.50 X 12.50 / 53.34 X 24.13 X 31.75 23

200659 CBF – 25 – 2010 2.50 / 6.35 20.00 / 50.80 10 12 21.00 X 9.50 X 12.50 / 53.34 X 24.13 X 31.75 23

4.5” Diameter Specifications

PartNumber Model Diameter

(inches / mm)Length

(inches / mm)MicronRating

CaseQuantity

Box Dimension(inches / mm)

ApproximateWeight bycase (lbs.)

200660 CBF – 45 – 1005 4.50 / 11.43 10.00 / 25.40 5 12 15.50 X 11.50 X 20.50 / 39.37 X 29.21 X 52.07 37

200662 CBF – 45 – 1010 4.50 / 11.43 10.00 / 25.40 10 12 15.50 X 11.50 X 20.50 / 39.37 X 29.21 X 52.07 37

200661 CBF – 45 – 2005 4.50 / 11.43 20.00 / 50.80 5 6 15.50 X 10.50 X 22.00 / 39.37 X 26.67 X 55.88 37

200663 CBF – 45 – 2010 4.50 / 11.43 20.00 / 50.80 10 6 15.50 X 10.50 X 22.00 / 39.37 X 26.67 X 55.88 37

2.5” DIAMETER x 9 3/4” LENGTH

GALLONS PER MINUTE

PRES

SURE

DRO

P (P

SID

)

14

12

10

8

6

4

2

0 1 2 3 4 5 6 7 8 9 10

CB-25-1005

CB-25-1010

4.5” DIAMETER x 9 3/4” LENGTH

GALLONS PER MINUTE

PRES

SURE

DRO

P (P

SID

)

14

12

10

8

6

4

2

0 1 2 3 4 5 6 7 8 9 10

CB-45-1005

CB-45-1010

8 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


SDF – Series Sediment Filter Cartridges

AXEON SDF – Series Sediment Filter Cartridges are

available in 2.5” and 4.5” diameters and provide an

economical and high quality option for numerous pre–and

post–filtration applications. AXEON SDF – Series

Sediment Filter Cartridges can be used as a single stage

of filtration for particulate reduction, or as an integrated

stage of filtration within a water treatment system.

AXEON 4.5” SDF – Series Sediment Filter Cartridge

features a multi–stage depth filtration design that allows for

four separate layers of micron filtration. These filters are

engineered to create an outside–in flow that allows the

outmost layer to capture larger sized particles and the

inner layer to capture the stated micron rating of the filter.

This results in a much lower pressure drop when compared

to other conventional sediment filters. In addition, the

trapping of various sized particles layer–by–layer provides

a higher particulate holding capacity than standard spun

polypropylene and string wound cartridges.

Benefits� Manufactured From 100% Pure Polypropylene Fibers

� Surfactant, Binder and Adhesive Free

� Graded Density for Higher Particulate Holding Capacity

� High Chemical Resistance

� Outside–In Flow Technology

� Four Layers of Step–By–Step Micron Filtration

� Minimal Pressure Drop

� FDA Approved Materials

Tested and Certified by NSF International against ANSI/NSF Standard 42 for material requirements only.

COMPONENT

9 - 2


MKTF-237-D AXEON is a registered trademark of AXEON Water Technologies. 09/16 ©2016 AXEON Water Technologies

SDF – Series Sediment Filter Cartridges

2.5” Diameter Filter Specifications

Part Number Model Number Diameter(inch / mm)

Length(inch / mm)

MicronRating

CaseQuantity

Box Dimension(inch / mm)

ApproximateBox Weight

(lbs)

200620 SDF – 25 – 1001 2.50 / 63.50 9.75 / 247.65 1 50 21 X 13 X 13 / 533 X 330 X 330 15

200621 SDF – 25 – 1005 2.50 / 63.50 9.75 / 247.65 5 50 21 X 13 X 13 / 533 X 330 X 330 15

200622 SDF – 25 – 1010 2.50 / 63.50 9.75 / 247.65 10 50 21 X 13 X 13 / 533 X 330 X 330 15

200623 SDF – 25 – 1020 2.50 / 63.50 9.75 / 247.65 20 50 21 X 13 X 13 / 533 X 330 X 330 15

200625 SDF – 25 – 2001 2.50 / 63.50 20.00 / 508.00 1 50 21 X 13 X 13 / 533 X 330 X 330 15

200626 SDF – 25 – 2005 2.50 / 63.50 20.00 / 508.00 5 25 21 X 13 X 13 / 533 X 330 X 330 15

200627 SDF – 25 – 2010 2.50 / 63.50 20.00 / 508.00 10 25 21 X 13 X 13 / 533 X 330 X 330 15

200628 SDF – 25 – 2020 2.50 / 63.50 20.00 / 508.00 20 25 21 X 13 X 13 / 533 X 330 X 330 15

201931 SDF – 25 – 3001 2.50 / 63.50 30.00 / 762.00 1 20 11 X 13 X 31 / 279 X 330 X 787 22

201932 SDF – 25 – 3005 2.50 / 63.50 30.00 / 762.00 5 20 11 X 13 X 31 / 279 X 330 X 787 22

201933 SDF – 25 – 3010 2.50 / 63.50 30.00 / 762.00 10 20 11 X 13 X 31 / 279 X 330 X 787 20

206810 SDF – 25 – 3050 2.50 / 63.50 30.00 / 762.00 50 20 11 X 13 X 31 / 279 X 330 X 787 20

201935 SDF – 25 – 3075 2.50 / 63.50 30.00 / 762.00 75 20 11 X 13 X 31 / 279 X 330 X 787 20

200630 SDF – 25 – 4001 2.50 / 63.50 40.00 / 1016 1 20 11 X 13 X 41 / 279 X 330 X 1041 27

200631 SDF – 25 – 4005 2.50 / 63.50 40.00 / 1016 5 20 11 X 13 X 41 / 279 X 330 X 1041 27

201930 SDF – 25 – 4010 2.50 / 63.50 40.00 / 1016 10 20 11 X 13 X 41 / 279 X 330 X 1041 27

206809 SDF – 25 – 4040 2.50 / 63.50 40.00 / 1016 40 20 11 X 13 X 41 / 279 X 330 X 1041 27

206811 SDF – 25 – 4070 2.50 / 63.50 40.00 / 1016 70 20 11 X 13 X 41 / 279 X 330 X 1041 26

4.5” Diameter Filter Specifications

Part Number Model Diameter(inch / mm)

Length(inch / mm)

MicronRating

CaseQuantity

Box Dimension(inch / mm)

ApproximateBox Weight

(lbs)

200634 SDF – 45 – 1001 4.50 / 114.30 9.75 / 247.65 1 12 10 X 13 X 21 / 254 X 330 X 1041 14

200635 SDF – 45 – 1005 4.50 / 114.30 9.75 / 247.65 5 12 10 X 13 X 21 / 254 X 330 X 1041 14

200636 SDF – 45 – 1010 4.50 / 114.30 9.75 / 247.65 10 12 10 X 13 X 21 / 254 X 330 X 1041 14

200637 SDF – 45 – 1020 4.50 / 114.30 9.75 / 247.65 20 6 10 X 13 X 21 / 254 X 330 X 1041 14

200639 SDF – 45 – 2001 4.50 / 114.30 20.00 / 508.00 1 6 10 X 13 X 21 / 254 X 330 X 1041 14

200640 SDF – 45 – 2005 4.50 / 114.30 20.00 / 508.00 5 6 10 X 13 X 21 / 254 X 330 X 1041 14

200641 SDF – 45 – 2010 4.50 / 114.30 20.00 / 508.00 10 6 10 X 13 X 21 / 254 X 330 X 1041 14

200642 SDF – 45 – 2020 4.50 / 114.30 20.00 / 508.00 20 6 10 X 13 X 21 / 254 X 330 X 1041 14

200643 SDF – 45 – 2050 4.50 / 114.30 20.00 / 508.00 50 6 10 X 13 X 21 / 254 X 330 X 1041 14

9 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


ILF – Series Inline Filter Cartridges

MKTF-252-C AXEON is a registered trademark of AXEON Water Technologies. 03/17 ©2017 AXEON Water Technologies

PartNumber

ModelNumber

Diameter(in / mm)

Length(in / mm)

PortsFNPT (in)

CaseQuantity

Box Dimensions(in / mm)

ApproximateWeight by Case

(lbs.)

200654 ILF – 2010 – 14 – GAC 2.00 / 50.80 10.00 / 254.0 1/4 25 10.75 X 10.75 X 10.75 / 273.0 X 273.0 X 273.0 15

200618 ILF – 2010 – 14 – SED 2.00 / 50.80 10.00 / 254.0 1/4 25 10.75 X 10.75 X 10.75 / 273.0 X 273.0 X 273.0 12

AXEON ILF – Series Inline Filter Cartridges utilize a sleek encapsulated design that fits most standard

water lines that feature coconut shell carbon and sediment filtration. The carbon used in these

cartridges has been specifically developed to reduce sediments, color, soluble organic

compounds (SOC) and volatile organic compounds (VOC).

AXEON ILF – Series Inline Filter Cartridges provide solutions for a variety of

applications that need the removal of bad taste and odor. These cartridges act

as an excellent post–treatment for reverse osmosis as well as being effective

for applications in ice, coffee making and refrigeration.

Benefits� Chlorine, Bad Taste and Odor Reduction

� Design Eliminates Channeling, By–Pass and

Reduces Release of Carbon Fines

� Tested and Verified Performance by Independent Laboratory

Operating Limits� Service Life (gal / l): 2,500 / 9,500 or est. 6 months

� Maximum Flow Rate (gpm / lpm): 0.50 / 1.9

� Maximum Operating Pressure (psi / bar): 100 / 6.89

� Minimum Operating Temperature (°F / °C): 35 / 2

� Maximum Operating Temperature (°F / °C): 100 / 38

Applications� Icemakers

� Reverse Osmosis Systems

� Coffee Makers

� Refrigerators

Product Specifications

Tested and Certified by NSF International against ANSI/NSF Standard 42 for material requirements only.

COMPONENT

10 - 2


RFF – Series Refillable Filter Cartridges

AXEON RFF – Series Refillable Filter Cartridges

will fit most filter housings and can be customized

with any filtration media or resin of choice.

Cartridges can be used as a single point

of treatment or integrated into a water

treatment system.

AXEON RFF – Series Refillable Filter Cartridges

come with built–in pre– and post– filters to keep

the media from being washed out of the filter

cartridge. These durable cartridges offer

flexibility and high quality without many

of the common problems associated

with other empty cartridge designs.

11 - 2


MKTF-242-E AXEON is a registered trademark of AXEON Water Technologies. 03/17 ©2017 AXEON Water Technologies

RFF – Series Refillable Filter Cartridges

PartNumber

ModelNumber

Diameter(in / mm)

Length(in / mm)

Volume(Cubic Ft.)

MaxFlow Rate(gpm)

CaseQuantity

Box Dimensions(in / mm)

ApproximateWeight by Case

(lbs.)

200700 REF – 25 – 10 2.50 / 63.50 10.00 / 254.00 0.027 5 50 21.25 X 15.25 X 15.25 /539.7 X 387.3 X 387.3 15

200701 REF – 25 – 20 2.50 / 63.50 20.00 / 508.00 0.055 5 25 21.25 X 15.25 X 15.25 /539.7 X 387.3 X 387.3 12

200702 REF – 45 – 10 4.50 / 114.30 10.00 / 254.00 0.077 20 12 21.50 X 15.25 X 10.75 /546.1 X 387.3 X 273.0 10

200703 REF – 45 – 20 4.50 / 114.30 20.00 / 508.00 0.150 20 6 21.50 X 15.25 X 10.75 /546.1 X 387.3 X 273.0 9

Product Specifications

Benefits� Fits Standard 2.5” and 4.5”

Filter Housings

� High Capacity Flow Rates

� Customizable to Fit Any Application

Materials of Construction� Cartridge Body: High – density Polyethylene

(HDPE)

� End Caps: Polypropylene

� Filter Pad on End Cap: Polypropylene

� Gasket: Thermoplastic Elastomer (TPE)

� 5 Micron Sediment Filter: Polypropylene

11 - 3


REF – Series Refillable Filter Cartridges

AXEON REF – Series Refillable Filter Cartridges utilize our unique 2.5” and 4.0” diameter configurations that fit

most standard size reverse osmosis membrane housings. These cartridges can be filled by the

customer with any filtration media of choice for suitability in a wide range of water

treatment applications.

AXEON REF – Series Refillable Filter Cartridges can be used both before

and after the reverse osmosis membrane elements to meet pre-- and

post– treatment needs, or act as a stand–alone

point of filtration.

11 - 4


MKTF-144-C AXEON is a registered trademark of AXEON Water Technologies. 03/17 ©2017 AXEON Water Technologies

REF – Series Refillable Filter Cartridges

Benefits� Fits Standard 2.5” or 4.0” Reverse Osmosis Membrane Housings

� Flip Proof Seal

Materials of Construction� Shell: ABS

� Carriers: ABS

� Chevron Seal: EPDM

� Pad: Felt

PartNumber

ModelNumber

Diameter(in / mm)

Length(in / mm)

CaseQuantity

Box Dimensions(in / mm)

ApproximateWeight by Case

(lbs.)

200704 REF – 25 – 21 2.50 / 63.50 21.00 / 533.40 50 22.00 X 16.00 X 16.50 / 558.8 X 406.4 X 419.1 15

200705 REF – 25 – 40 2.50 / 63.50 40.00 / 1016.00 25 22.00 X 16.00 X 16.50 /558.8 X 406.4 X 419.1 12

200706 REF – 40 – 21 4.00 / 101.60 21.00 / 533.40 12 16.00 X 11.50 X 22.50 /406.4 X 292.1 X 571.5 10

200707 REF – 40 – 40 4.00 / 101.60 40.00 / 1016.00 6 16.00 X 11.50 X 22.50 /406.4 X 292.1 X 571.5 9

Product Specifications

11 - 5


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


QCS – Series QuickChange™ Cartridges

Know Higher Standards™

AXEON QCS – Series QuickChange™ Cartridges are an excellent alternative to standard food service water filters delivering unparalleled performance and ensuring pure, clean filtered water. Cartridge replacements are made easy by the QuickChange™ cartridge design. These cartridges reduce contaminants that may be found in water supplies such as sediment, chlorine, scale, cysts and lead. QCS – Series cartridges are built from a seamless, polymer–lined aluminum body and delver six times more filtering efficiency, chlorine and particulate reduction than competing cartridges.

Easy and Simple Replacement

Private Labeling Available

Minimal Pressure Drop

High Sediment Holding Capacity

Durable Physical Strength

QCS – Series QuickChange

QCS – Series QuickChange

QCS – Series QuickChange

Cartridges™QCS – Series QuickChange

Cartridges

mance and ensuring pure, clean filtered perforwater filtere ervic

excellent an re Series – QCS AXEON

mance and ensuring pure, clean filtered unparalleleg deliverins water filter

standard food to alternative excellent uickChange™QSeries

mance and ensuring pure, clean filtered d unparallele

standard food Cartridges

hl i d particulate reduction than nd delver six times more filtering efficiency, rom a seamless, polymer–lined aluminum body

QCS – Seriesysts and lead. n water supplies such as sediment, chloartridges reduce contaminants that may be found

QuickChange™he water. Cartridge

chlorine and particulate reduction than and delver six times more filtering efficiency, from a seamless, polymer–lined aluminum body

cartridges QCS – Seriesrine, scale, in water supplies such as sediment, chlo

cartridges reduce contaminants that may be found cartridge design. These QuickChange™

water. Cartridge replacements are made easy by

chlorine and particulate reduction than and delver six times more filtering efficiency, from a seamless, polymer–lined aluminum body

built are cartridges rine, scale,

cartridges reduce contaminants that may be found cartridge design. These

water. Cartridge replacements are made easy by

Minimal Pressure Drop

Private Labeling Available

Easy and Simple Replacement

ompeting cartridchlorine and particulate reduction than

Minimal Pressure Drop

Private Labeling Available

Easy and Simple Replacement

competing cartridges.chlorine and particulate reduction than

chlorine and particulate reduction than

Durable Physical Strength

High Sediment Holding Capacity

Durable Physical Strength

High Sediment Holding Capacity

Know Higher Standards

Know Higher Standards

™ dards s™

12 - 3


QCS – Series QuickChange™ Cartridges

Brackets:

EVERPURE®* PART NUMBER MODEL MEDIA TYPE REPLACEMENT MICRON SIZE

210165 QCS10-CB-PH Carbon Block + Phosphate 0.5

210171 QCS15-CB-KD Carbon Block + KDF AC 0.5

210175 QCS15-CB-KD-LR Carbon Block + KDF + Lead Reduction 0.5

210169 QCS15-CB Carbon Block 4CB5 5.0

210176 QCS15-SE Sediment 4C-X 0.5

210172 QCS20-CB-KD-LR Carbon Block + KDF + Lead Reduction H–300 0.5

210166 QCS20-CB-PH Carbon Block + Phosphate 0.5

210167 QCS20-CB Carbon Block 7CB5 5.0

210177 QCS20-AC-PH-SR Activated Carbon + Phosphate + Softener Resin N/A

210170 QCS20-CB-HF Carbon Block + Hollow Fiber MC2 0.1

PART NUMBER MODEL DESCRIPTION

210178 QCS-SB-1S-38Head, Adapter, Single, With SS Bracket,

3/8" Inlet/Outlet, QCS-SB-1S-38, AXEON

EverPure® is a registered trademark of Everpure, Inc. Northbrook, IL.

OCS2

2CB-GW

4H4H-L

i20002

i40002

N/A

QCS – Series QuickChange

MBERUT NRAPPA

Series Quic

MODEL

™QCS – Series QuickChange

YPETMEDIA

Cartridges

CEMENT ALREP

*®VERPUREE

Cartridges

MICRON SIZECEMENT

210171

210165

-KD

H

BC-QCS15

-PBC-QCS10

+ KDF

t

kk + KDFco BlnboraC

ahpsohP + kk + co BlnboraC

C

e

A

t WG-B2C

2SOC

0.5

0.5

210176

921016

210175

QCS15-SE

CB-QCS15

-LRD-KBC-QCS15

tnemideS

kco BlnboraC

eduRdeaL KDF + +ock ln BobraC

X-4C

4CB5

iontcedu L4H-H4

0.5

5.0

0.5

210167

210166

210172

CB-QCS20

H-PBC-QCS20

R-LD-KBC-QCS20

kocl BnboraC

tasphhoP+kocl BnboraC

eduRd aeL+F KD+k ocn BlobraC

7CB5

e t

300H–tioncedu

20i400

20i200

5.0

0.5

0.5

MBER

210177

Brackets:

210170

UT NRAPPA

MODEL

C-A-CS20Q

-HFBC-QCS20

cARSH-P

DESCRIPTION

ber iFw oll Ho+kocl BnboraC

oSe + tasphhoP+bon raCed tavtic

2CMber

niseRrenetffto AN/

0.1

AN/

MBER

210178

UT NRAPPA

is a registered trade ®® EverPure

MODEL

8-3S-1B-SSQC

is a registered trademark of Everpure, Inc. Northbrook, IL.

DESCRIPTION

-38, S-1B-SS, QCtutleOnlet/I3/8" ith SS BW,e, Singlrr, SingletdapA, dHea

XEONA-38, , tackerith SS B

12 - 4


LIFE CAPACITY FLOW RATES PRESSURE TEMPERATURE

GAL DIMENSIONS

3,000 (11,355) 0.5 (1.9) 10–125 (0.7–8.6) 35–100 (2–38)

750 (2,835) 0.5 (1.9) 10–125 (0.7–8.6) 35–100 (2–38)

3,000 (11,355) 0.5 (1.9) 10–125 (0.7–8.6) 35–100 (2–38)

6,000 (22,710) 1.67 (6.32) 10–125 (0.7–8.6) 35–100 (2–38)

N/A 0.5 (1.9) 10–125 (0.7–8.6) 35–100 (2–38)

300 (1,135) 0.5 (1.9) 10–125 (0.7–8.6) 35–100 (2–38)

12,000 (45,420) 1.67 (6.32) 10–125 (0.7–8.6) 35–100 (2–38)

10,000 (37,854) 1.67 (6.32) 10–125 (0.7–8.6) 35–100 (2–38)

600 (2,300) 0.5 (1.9) 10–125 (0.7–8.6) 35–100 (2–38)

9,000 (34,068) 1.67 (6.32) 10–125 (0.7–8.6) 35–100 (2–38)

PART NUMBER MODEL DESCRIPTION

210179 QCS-SB-2S-38

Bracket, Mounting, 2-Stage, with White Cover, 3/8" Inlet/Outlet, QCS-SB-2S-38, AXEON

Know Higher Standards™

(244mm)9.6”

(84mm) 3.3”

(356 mm)14”

(84mm) 3.3”

(519 mm)20.4”

(84mm) 3.3”

GALYTCIAPPAACLIFE

TES AATES RW OLOF

PRESSURE

Know Higher Standards

3.3”

TUREAATURERTEMPEDIMENSIONS

Know Higher Standards

3.3”

DIMENSIONS

™ dards s™

(84mm)

2,835)

3,000 (11,355)

(075

0.5 (1.9)

0.5 (1.9)

)

)

8.6–0.7(125 –10

8.6–0.7(125 –10

35–100 (2–38)

)

3.3”

2–38(100 –35

3.3”

9.6”(244mm)

(84mm)

AN/

(22,710)006,0

3,000 (11,355)

0.5 (1.9)

)1.67 (6.32

0.5 (1.9)

)8.6–0.7(125 –10

)8.6–0.7(125 –10

)8.6–0.7(125 –10

)83–2(00135–

)35–100 (2–38

)2–38(100 –35

14”(356 mm)

37,854)(010,00

(45,420) 0012,0

1,135)(300

)26.3(71.6

)1.67 (6.32

0.5 (1.9)

)8.6–0.7(125 –10

)8.6–0.7(125 –10

)8.6–0.7(125 –10

)35–100 (2–38

)35–100 (2–38

35–100 (2–38) 3.3”

3.3” (84mm)

20.4”(519 mm)

MBER

34,068)

UT NRAPPA

(09,00

2,300)(060

DESCRIPTION

1.67 (6.32)

MODEL

1.9)(0.5

DESCRIPTION

)8.6–0.7(125 –10

)8.6–0.7(125 –10

)2–38(100 –35

)35–100 (2–38

MBER

210179

UT NRAPPA

DESCRIPTION

Inle"8/3kcBra

8-3S-2B-SSQC

MODEL

DESCRIPTION

OEXA,38S-2SB--CSQ,tletuO/tInletWhihwit,egta-S2,gtinnuMo,tek

NO,erovCet

12 - 5


AXEON©MKTF-465-C 11/2017 ©2017 AXEON© Water Technologies

Chlorine Reduction

Pesticides Reduction

Hazardous Chemicals Reduction

Odor Reduction

Taste Improvement

Sediment, Particles Reduction

Dirt, Particles, Cyst as Small as 0.5uM by Mechanical Means

Cyst, Dirt and Sediment as Small as 0.1uM by Mechanical Means

Lime Scale Inhabitation

Bacterial Reduction

Lead Reduction

Water Softening

Food Service

Ice

Fountain

Office Coffee Service

Vending, Office Coffee Service

Drinking Water, Polisher

Bottleless Coolers

Cold Cup Vending

Specialty Coffee, Espresso, Ice Tea

Single Cup Coffee Machines (POD)

QCS15-CB-KD

QCS15-CB-KD

QCS10-CB-PH

QCS10-CB-PH

QCS15-CB-KD-LR

QCS15-CB-KD-LR

QCS15-CB

QCS15-CB

QCS15-SE

QCS15-SE

QCS20-CB-KD-LR

QCS20-CB-KD-LR

QCS20-CB-PH

QCS20-CB-PH

QCS20-CB

QCS20-CB

QCS20-AC-PH-SR

QCS20-CB-HF

QCS20-AC-PH-SR

QCS20-CB-HF

QCS – Series QuickChange™ Cartridges

Applications

Performance

is a registered trademark of AXEON Water Technologies.

itcuedResidcitseP

oitcudeRenirolhC

Performance

H

no

n

PCB--01SCQPerformance

QCS – Series QuickChange

D B ERKCB--51SCQ

LCB-KD--5CS1Q

C-51SCQ

SSCQ

QCS – Series QuickChange

E R H B-51S

LCB-KD--02SCQ

P-CB-02SCQ

C-02SCQ

Cartridges™QCS – Series QuickChange

R F

Cartridges

H-CB-02SCQ

S-HP-CAC-02SCQ

nahceM by Mu5.0tsyC,selcitraP,tt,riD

elcitraP,tnemiedS

nemevorpmIe tsaT

noitcudeRrodO

cimehCsuodrazaH

sna Melacisal lamSsa

noitcuedRs

tn

noitcuedRslac

gninetfftoSretaW

noitcudeRdaeL

oitcudeRlairetcaB

tibahnIe lacSe miL

nahce MyM bu1.0ideSdnatri D,tsyC

n

noitat

sna MelacisallamSsatnem

vreSeeffeefffoCe cffiO

nintauoF

ecI

ecivreSodoF

Applications

eci

HPCB--01SCQApplications

RD B EKCB--51SCQ

LCB-KD--5CS1Q

C-51SCQ

SSCQ

BE R H-51S

LCB-KD--02SCQ

P-CB-02SCQ

C-02SCQ

R FS-HPC-AC-02SCQ

H-CB-02SCQ

E,eeffefffoCy tlaicepS

gnidneVVepuCdloC

srelooCsseleltotB

oP,rr,etaWgniknirD

oCce iffffiO,gnidneV

vreSeeffeefffoCe cffiO

aeTTeceI,oo,sserps E

g

rehsilo

ecivreSeeffeefffo

eci

MKTF-465-C

eeffeefffoCp uCelgniS

©NAXEO

)DOP(esnihcaM

is a registered trademark of AXEON Water Technologies.

11/2017 ©2017 AXEOis a registered trademark of AXEON Water Technologies.

Water Technologies© N11/2017 ©2017 AXEO

12 - 6


MIR – Series Mixed Bed DI Cartridges

AXEON MIR – Series Mixed Bed DI Cartridges utilize our unique 2.5” and 4.0” configurations that fit most standard

size reverse osmosis membrane housings.

AXEON MIR – Series Mixed Bed DI Cartridges feature a Gel Poly Styrene Cross–linked

with DVB mixed bed resin. The DI resin used in these cartridges has been specifically

developed to reduce total dissolved solids, including calcium and

magnesium carbonate.

AXEON MIR – Series Mixed Bed DI Cartridges provide a

solution for a variety of applications that need the

removal of ionic contaminants. These cartridges

act as excellent post–treatment for

reverse osmosis systems as well

as being effective for applications

in the pharmaceutical,

semiconductor, medical

and industrial fields.

13 - 2


MKTF-341-B AXEON is a registered trademark of AXEON Water Technologies. 03/17 ©2017 AXEON Water Technologies

MIR – Series Mixed Bed DI Cartridges

Benefits� Fits Standard 2.5” and 4.0” Reverse Osmosis Membrane Housings

� High Capacity Flow Rates

� Flip Proof Seal

� High Quality Anion and Cation Mixed DI Resins

Materials of Construction� Shell: ABS

� Carriers: ABS

� Chevron Seal: EPDM

� Pad: Felt

� Resin: Gel Poly Styrene cross linked with DVB

PartNumber

ModelNumber

Cubic Ft. Diameter(in / mm)

Length(in / mm)

Box Dimensions(in / mm)

DescriptionCaCO3Capacity(grains)

200696 MIR – 25 – 21 0.06 2.50 / 63.50 21.00 / 533.40 3.40 X 22.00 /86.36 X 558.8

Anion andCation Mixed Bed DI Resin

1274 @0.50 gpm

200697 MIR – 25 – 40 0.11 2.50 / 63.50 40.00 / 1016.00 3.40 X 41.00 /86.36 X 1041

Anion andCation Mixed Bed DI Resin

1274 @0.50 gpm

200698 MIR – 40 – 21 0.15 4.00 / 101.60 21.00 / 533.40 4.95 X 22.00 /125.7 X 558.8

Anion andCation Mixed Bed DI Resin

1703 @1.00 gpm

200699 MIR – 40 – 40 0.28 4.00 / 101.60 40.00 / 1016.00 4.95 X 41.00 /125.7 X 1041

Anion andCation Mixed Bed DI Resin

3500 @1.50 gpm

Product Specifications

13 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


Standard Felt Filter Bags

MKTF-266-B AXEON is a registered trademark of AXEON Water Technologies. 02/17 ©2017 AXEON Water Technologies

AXEON Standard Felt Bags are designed with

no–bypass welded seams that eliminate the

possibility of fluid bypass through needle holes.

The filter construction is sturdy, allowing it to

withstand higher solid loading. Bag filters are

versatile and can be used in housings or open

filtration systems.

Benefits� Full Line of Felt Materials and Micron Ratings

� Conventional Sewn Bags or the Welded Seam Bags Available

� Heavy Duty and Extended Life Designs Available to Suit your Filtration Needs

� Polypropylene Filter Bag with 100% Polypropylene Rigid Insert and Welded Seam Construction

PartNumber

ModelNumber

Description Diameter(in / mm)

Length(in / mm)

MicronRating

CaseQuantity

Box Dimensions(in / mm)

ApproximateWeight byCase (lbs.)

ElementSeat

200708 GF – 101 Cartridge, Filter Bag,18”, 1 MIC, AXEON

6.00 / 152.40 18.00 / 457.20 1 5024.00 X 19.00 X 12.00 /609.6 X 482.6 X 304.8

15PolylocRing

200709 GF – 105 Cartridge, Filter Bag,18”, 5 MIC, AXEON

6.00 / 152.40 18.00 / 457.20 5 5024.00 X 19.00 X 12.00 /609.6 X 482.6 X 304.8

15PolylocRing

200710 GF – 110 Cartridge, Filter Bag,18”, 10 MIC, AXEON

6.00 / 152.40 18.00 / 457.20 10 5024.00 X 19.00 X 12.00 /609.6 X 482.6 X 304.8

15PolylocRing

200711 GF – 125 Cartridge, Filter Bag,18”, 25 MIC, AXEON

6.00 / 152.40 18.00 / 457.20 25 5024.00 X 19.00 X 12.00 /609.6 X 482.6 X 304.8

15PolylocRing

200712 GF – 150Cartridge, Filter Bag,18”, 50 MIC, AXEON

6.00 / 152.40 18.00 / 457.20 50 5024.00 X 19.00 X 12.00 /609.6 X 482.6 X 304.8

15PolylocRing

Product Specifications

14 - 2


Big Grey Cartridge Housings

AXEON by Pentek® Big Grey Cartridge Housings offer the versatility to meet all

of your large–capacity filtration needs, including high–flow and heavy–sediment

applications. The extra large housing allows for greater cartridge capacity,

reducing the number of vessels required for high flow–rate applications. Sumps

are constructed of durable reinforced polypropylene and are available in both

10” and 20” lengths.

The high–flow polypropylene (HFPP) cap is available with 3/4” and 1” or NPT

inlet and outlet ports. The 1” internal port allows a greater volume of liquid to

pass through the HFPP cap more rapidly.

AXEON by Pentek® Big Grey Cartridge Housings are compatible with a broad

range of chemicals. They accept a wide variety of 4 1/2” diameter cartridges.

Benefits� Large Capacity Filter Housings Suitable for High Flow Applications

� 10” and 20” Lengths Available

� Accepts 4 1/2” Diameter Cartridges

Operating Limits� Maximum Operating Pressure (psi / bar): 10”: 100 / 6.9

20”: 90 / 6.2

� Minimum Operating Temperature (F / C): 40 / 4.4

� Maximum Operating Temperature (F / C): 100 / 37.8

AXEON by Pentek®

Big Grey Cartridge Housings

Materials of Construction� Housing: Polypropylene

� Cap: Polypropylene (HFPP)

� O–Ring: Buna–N®

15 - 2


MKTF-269-D AXEON is a registered trademark of AXEON Water Technologies. 09/17 ©2017 AXEON Water Technologies

Big Grey Cartridge Housings

PartNumber

DescriptionDiameter(in / mm)

Length(in / mm)

CaseQuantity

Box Dimensions(in / mm)

ApproximateWeight by Case

(lbs.)

207286HOUSING FILTER, BLK/GRY, 4.5” X 10”,

SINGLE, O–RING, NPR, 3/4” FNPT, AXEON4.50 / 114.3 10.00 / 254.0 8

13.13 X 7.25 /333.5 X 184.1

34

207287HOUSING FILTER, BLK/GRY, 4.5” X 10”, SINGLE, O–RING, NPR,1” FNPT, AXEON

4.50 / 114.3 10.00 / 254.0 813.13 X 7.25 /333.5 X 184.1

34

207289HOUSING FILTER, BLK/GRY, 4.5” X 20”,

SINGLE, O–RING, NPR, 3/4” FNPT, AXEON4.50 / 114.3 20.00 / 508.0 4

23.38 X 7.25 /593.9 X 184.1

34

207290HOUSING FILTER, BLK/GRY, 4.5” X 20”,SINGLE, O–RING, NPR, 1” FNPT, AXEON

4.50 / 114.3 20.00 / 508.0 423.38 X 7.25 /593.9 X 184.1

34

Product Specifications

CAUTION: Protect against freezing to prevent cracking of the filter and water leakage. Do not operate outside of the parameters specified by the manufacturer.

15 - 3


Slim Line Cartridge Housings

AXEON by Pentair® Slim Line Filter Cartridge Housings offer

outstanding chemical compatibility and are ideal for use in a

variety of low–flow applications. These applications include

under–sink and countertop residential filtration, pre– and

post– reverse osmosis filtration, recreational vehicle filtration

and humidifying systems. Constructed of durable reinforced

polypropylene, AXEON by Pentair® Slim Line Filter Cartridge

Housings are constructed of durable reinforced

polypropylene and available in both 10" and 20" lengths.

AXEON by Pentair® Slim LineFilter Cartridge Housings

Benefits� Slim Design Reduces Space Required for Installation

without Sacrificing Capacity

� Available in 10” and 20” Lengths

� Leak–Proof Seal with Top–Seated O–ring

Operating Limits� Maximum Operating Pressure (psi / bar): 125 / 8.6

� Temperature Rating (F / C): 40 / 125

Materials of Construction� Housing: Polypropylene

� Cap: Reinforced Polypropylene (HFPP)

� O–Ring: Buna–N®

15 - 4


MKTF-268-B AXEON is a registered trademark of AXEON Water Technologies. 04/17 ©2017 AXEON Water Technologies

Slim Line Filter Cartridge Housings

PartNumber

Description Diameter(in / cm)

Length(in / cm)

CaseQuantity

Box Dimensions(in / cm)

ApproximateWeight by Case

(lbs.)

207281HOUSING FILTER, WHT/WHT, 2.5” X 10”,SINGLE O–RING, NPR, 1/4” FNPT, AXEON 2.50 / 6.35 10.00 / 25.40 12 11.75 X 4.38 /

29.90 X 11.10 23

207282HOUSING FILTER, WHT/WHT, 2.5” X 10”,SINGLE O–RING, NPR, 3/8” FNPT, AXEON 2.50 / 6.35 10.00 / 25.40 12 11.75 X 4.38 /

29.90 X 11.10 23

207292HOUSING FILTER, WHT/WHT, 2.5” X 10”,SINGLE O–RING, NPR, 1/2” FNPT, AXEON 2.50 / 6.35 10.00 / 25.40 12 11.75 X 4.38 /

29.90 X 11.10 23

207293HOUSING FILTER, WHT/WHT, 2.5” X 10”,SINGLE O–RING, NPR, 3/4” FNPT, AXEON 2.50 / 6.35 10.00 / 25.40 12 11.75 X 4.38 /

29.90 X 11.10 23

207294HOUSING FILTER, WHT/WHT, 2.5” X 20”,SINGLE O–RING, NPR, 1/4” FNPT, AXEON 2.50 / 6.35 20.00 / 50.80 8 21.88 X 4.38 /

55.60 X 11.10 23

207295HOUSING FILTER, WHT/WHT, 2.5” X 20”,SINGLE O–RING, NPR, 3/8” FNPT, AXEON 2.50 / 6.35 20.00 / 50.80 8 21.88 X 4.38 /

55.60 X 11.10 31

207296HOUSING FILTER, WHT/WHT, 2.5” X 20”,SINGLE O–RING, NPR, 1/2” FNPT, AXEON 2.50 / 6.35 20.00 / 50.80 8 21.88 X 4.38 /

55.60 X 11.10 31

207404*HOUSING FILTER, WHT/WHT, 2.5” X 20”,SINGLE O–RING, NPR, 3/4” FNPT, AXEON 2.50 / 6.35 20.00 / 50.80 6 21.88 X 4.38 /

55.60 X 11.10 29

Product Specifications

CAUTION: Protect against freezing to prevent cracking of the housing and water leakage. Do not operate outside of the parameters specified by the manufacturer.

* Item from alternate source.

15 - 5


GF – Series Cartridge Housings

AXEON by Pall GF – Series Cartridge Housings are constructed from

lightweight polypropylene, and include a UV inhibitor for all weather

durability. AXEON by Pall GF – Series Cartridge Housings are customizable

for various applications and are resistant to various chemicals. The threaded

lid allows for sealing and unsealing without the need of other tools.

Benefits� No Sump Disassembly

� Lightweight, Chemically Resistant

� Bag Filter Design

� No Fluid By–Pass

� Easy Access for Manual Cleaning or In–Place Flushing

� Meets Certification Requirements

Features� 100% Polypropylene Construction

� Twist–Off Lid Design Requires No Tools for Quick and Easy Change–Out

� Clean Wall Design Provides Easy Access for Manual Cleaning or

In–Place Flushing

� Hermetic Sealing Bag Filters Result in No Fluid By–Pass

� UV Inhibitor for Long–Lasting, All–Weather Operation and Durability

� Filtration Media Available in 1 – 50 Micron Ratings

� Side Inlet / Bottom Outlet Eliminates Sump to Reduce Waste

� BGF1 Bag Compliant

Options� Plastic Legs

GF – Series Cartridge Housings* Picture Shown with Optional Plastic Legs

15 - 6


MKTF-271-C AXEON is a registered trademark of AXEON Water Technologies. 12/17 ©2017 AXEON Water Technologies

GF – Series Cartridge Filter Housings

PartNumber

ModelNumber

Description Includes

200739 GF – 100 Plastic Bag Vessel Housing, Lid, Basket, Lid Gasket (BUNA)

200740 36017 Pair Plastic Legs 2 Plastic Legs

Product Specifications

Pressure Rating: 100 PSI @ 110oF Water Service. Approximate Weight: 10 lbs. Port Size: 2” NPT Threads available. Lid Vent: 1/4” NPT.

* Shown with optional plastic legs.

15 - 7


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


Brackets and Clips

AXEON Brackets are available for mounting standard filter housings and residential reverse osmosis systems. They

come in both plastic and steel body construction and are also available with machine screws, 5/16” lag bolts.

C

C

C

C

C200750

200476

200748

201923

202305

A

A

A

FEA

B

B

B

B

B

A

PartNumber

Material Stages A(in / mm)

B(in / mm)

C(in / mm)

D(in / mm)

E(in / mm)

F(in / mm)

Filter HousingSize

Compatibility (in)

200746 Plastic Single 3.75 / 95.25 4.00 / 101.60 1.75 / 44.45 N/A N/A N/A 2.50

201923 Steel Single 4.50 / 114.30 5.13 / 130.30 7.25 / 184.15 N/A N/A N/A 4.50

200748 Plastic Double 2.38 / 60.45 5.25 / 133.35 8.38 / 212.85 N/A N/A N/A 2.50

203331 Steel Double 15.13 / 384.30 4.25 / 108.00 8.50 / 215.90 N/A N/A N/A 4.50

200750 Plastic Triple 2.50 / 63.50 4.25 / 108.00 13.38 / 339.85 1.75 / 44.50 1.0 / 25.45 1.25 / 31.15 2.50

200751 Steel Triple 6.50 / 165.10 17.00 / 431.80 7.13 / 181.10 6.87 / 174.50 1.5 / 38.10 N/A 2.50

202305 Steel Triple 22.25 / 565.15 5.75 / 146.05 9.75 / 247.65 N/A N/A N/A 4.50

Product Specifications

Single SteelBracket

16 - 2


MKTF-273-B AXEON is a registered trademark of AXEON Water Technologies. 03/17 ©2017 AXEON Water Technologies

Brackets and Clips

AXEON Clips are available for mounting residential reverse osmosis filters, housings and components.

Part Number Single / Double A(in / mm)

B(in / mm)

201482 Single 2.00 / 50.80 N/A

200753 Single 3.00 / 76.20 N/A

200754 Double 2.50 / 63.50 2.00 / 50.80

203834 Double 2.50 / 63.50 2.50 / 63.50

Product Specifications

200754

201482

200753

200834

A

B

A

16 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


)""

8$&,)S%#$"&'(&",%$%b",/'!"#$%$!&'($)"#*(+#,($-.'(#+'$$$

8$&,)S%#$"&'(&",%$%b",/'L^LR'?39'''S1("*85&1#($-(#"515d#"'$*"#$*$"#15*R1#_$#2&,&+52*1$*,K$2H#+52*1=G"##$C*.$(&$'*G#;?*"K$K"5,35,;$C*(#"$5,$+&'($2&++#"25*1$*EE152*(5&,'Z$S1("*85&1#($eS7f$(#2H,&1&;.$5'$+&"#$#GG#2(58#$(H*,$2H1&"5,#$5,$K#'("&.5,;$2#"(*5,$C*(#"$R&",$2&,(*+5,*,('_$C5(H&?($*1(#"5,;$(H#$(*'(#$&G$C*(#"Z$)H5'$+*3#'$5($*$E"*2(52*1$E"&2#''$G&"$("#*(5,;$C*(#"$?'#K$G&"$K"5,35,;$*,K$G&&K$E"#E*"*(5&,Z$

)H#"#$*"#$,&$K5'5,G#2(5&,$R.E"&K?2('$C5(H$(H#$?'#$&G$S7_$CH52H$5'$'*G#$*,K$2H#+52*1$G"##Z$0?"(H#"+&"#_$S7$K&#'$,&($*1(#"$C*(#"$2H#+5'(".$*,K$5('$2&,'(5(?#,('_$'?2H$*'$EB_$(*'(#_$&K&"$&"$2&1&"Z$

'

(&)*+),+'-")&.,"/'' '

/$:b?5EE#K$(&$L,*2(58*(#$6H1&"5,#=J#'5'(*,($!*"*'5(#'$'?2H$*'$6".E(&'E&"5K5?+$*,K$^5*"K5*_$B*"+G?1$D*2(#"5*$153#$:Z6&15$*,K$75"?'#'$,&($75'5R1#$(&$(H#$O*3#K$:.#$

/$-E#25*11.$F#'5;,#K$*,K$)#'(#K$-(#"51?+#g=:<$>*+E'$!"&85K#$6&,'5'(#,($*,K$J#15*R1#$S1("*85&1#($`?(E?($`8#"$(H#$:,(5"#$>5G#$&G$(H#$>*+E$eX_UUU$H&?"'f_$(&$:,'?"#$6&,(5,?&?'$!?"5G52*(5&,$

/$)H#$!&C#"$-?EE1.$H*'$*$-#*1#K$6*'#$(&$!"#8#,($F*+*;#$G"&+$[225K#,(*1$I*(#"$L,("?'5&,$*,K$5'$0?11.$6-[$*,K$6:$6&+E15*,($

/$D?51($C5(H$*$F?"*R1#$-(*5,1#''$-(##1$6H*+R#"$(&$!"&1&,;$>5G#$*,K$:15+5,*(#$S1("*85&1#($>5;H($F#;"*K*(5&,$

/$)H#$-518#"g$L6:$!&C#"$-?EE1.$75'?*11.$F5'E1*.'$(H#$J#+*5,5,;$>*+E$>5G#$*,K$C511$-&?,K$*,$[1*"+$(&$O&(5G.$CH#,$O#2#''*".$

/$)H#$-.'(#+$5'$:*'.$(&$N*5,(*5,$*,K$-#"852#$/$7&1(*;#h$QQU$%$\\U7$TU$%$PUBd$

'

(0"1%2%1)&%#*/''

3456'789:;5' 9>@;='

8Y(Y'38:=BA'I;4=6I'

CLP'9c'd'A9eD'C?39D'

9478-4A685;5'(647@45@'''''''''''COK'9c'd'A9eD'

C?39D'

7(-'d';34'CQK'9c'd'A9eD'

C?39D'

5;4A6>5'CB7D'

A>765>==;5'CB7D'

B7=;6'd'>86=;6'3>56'(B!;'

CB7D'

(IB33B7?'H;B?I6'C=:(D'

3>H;5'A>7(8936B>7'

CHD'

6>64='5877B7?'6B9;'

AI49:;5'946;5B4=' <>=64?;'

JKKRLP' S7=PQU$ O%[$ QZU$ O%[$ QQ$Y$QZX$ O%[$ Q%@$i6$ \$ P$ j#'$ WU@$--$ \@$

JKKRJP' -\i=![$ @ZU$ WZU$ \ZU$ QVZQ$Y$\ZT$ AZW$Y$WZ\$Y$\ZT$ Q%\$0O!)$ V$ \\$ j#'$ WU@$--$ QQU$

JKKRJU' -\i=![$ @ZU$ WZU$ \ZU$ QVZQ$Y$\ZT$ AZW$Y$WZ\$Y$\ZT$ Q%\$0O!)$ V$ \\$ j#'$ WU@$--$ \\U$

JKKRJR' -Ti=![$ QQZU$ PZU$ @ZT$ \\ZQ$Y$\ZT$ AZW$Y$WZ\$Y$\ZT$ W%@$0O!)$ A$ WU$ j#'$ WU@$--$ QQU$

JKKRJN' -Ti=![$ QQZU$ PZU$ @ZT$ \\ZQ$Y$\ZT$ AZW$Y$WZ\$Y$\ZT$ W%@$0O!)$ A$ WU$ j#'$ WU@$--$ \\U$

JKKROK' -Ai=![$ \UZU$ QUZU$ AZU$ WTZP$Y$\ZT$ AZW$Y$WZ\$Y$\ZT$ W%@$0O!)$ QQ$ @P$ j#'$ WU@$--$ QQU$

JKKROL' -Ai=![$ \UZU$ QUZU$ AZU$ WTZP$Y$\ZT$ AZW$Y$WZ\$Y$\ZT$ W%@$0O!)$ QQ$ @P$ j#'$ WU@$--$ \\U$

JKNKNN' 7B@QU$ W@ZU$ QAZU$ Q@ZU$ \WZT$Y$WZT$ O%[$W%@$=$Q$

6`NDLO[)L`O$NO!)$e%\D=D-!f$

QV$ PU$ O%[$ O%[$ QQU$

JKNJNR' 7B@QU%\$ W@ZU$ QAZU$ Q@ZU$ \WZT$Y$WZT$ O%[$W%@$=$Q$

6`NDLO[)L`O$NO!)$e%\D=D-!f$

QV$ PU$ O%[$ O%[$ \\U$

k$01&C$"*(#'$'(*(#K$*($XT]$S7)$:`>$$

'

17 - 2


*""

8$&,)S%#$"&'(&",%$%b",/'

!"#$%$!&'($)"#*(+#,($-.'(#+'$$$

8$&,)S%#$"&'(&",%$%b",/'OK^QP'?39' ''S1("*85&1#($-(#"515d#"'$*"#$*$"#15*R1#_$#2&,&+52*1$*,K$2H#+52*1=G"##$C*.$(&$'*G#;?*"K$K"5,35,;$C*(#"$5,$+&'($2&++#"25*1$*EE152*(5&,'Z$S1("*85&1#($eS7f$(#2H,&1&;.$5'$+&"#$#GG#2(58#$(H*,$2H1&"5,#$5,$K#'("&.5,;$2#"(*5,$C*(#"$R&",$2&,(*+5,*,('_$C5(H&?($*1(#"5,;$(H#$(*'(#$&G$C*(#"Z$)H5'$+*3#'$5($*$E"*2(52*1$E"&2#''$G&"$("#*(5,;$C*(#"$?'#K$G&"$K"5,35,;$*,K$G&&K$E"#E*"*(5&,Z$

)H#"#$*"#$,&$K5'5,G#2(5&,$R.=E"&K?2('$C5(H$(H#$?'#$&G$S7_$CH52H$5'$'*G#$*,K$2H#+52*1$G"##Z$0?"(H#"+&"#_$S7$K&#'$,&($*1(#"$C*(#"$2H#+5'(".$*,K$5('$2&,'(5(?#,('_$'?2H$*'$EB_$(*'(#_$&K&"$&"$2&1&"Z$

'

'

(&)*+),+'-")&.,"/'' '

/$:b?5EE#K$(&$L,*2(58*(#$6H1&"5,#=J#'5'(*,($!*"*'5(#'$'?2H$*'$6".E(&'E&"5K5?+$*,K$^5*"K5*_$B*"+G?1$D*2(#"5*$153#$:Z6&15$*,K$75"?'#'$,&($75'5R1#$(&$(H#$O*3#K$:.#$

/$-E#25*11.$F#'5;,#K$*,K$)#'(#K$-(#"51?+#g=:<$>*+E'$!"&85K#$6&,'5'(#,($*,K$J#15*R1#$S1("*85&1#($`?(E?($`8#"$(H#$:,(5"#$>5G#$&G$(H#$>*+E$eX_UUU$H&?"'f_$(&$:,'?"#$6&,(5,?&?'$!?"5G52*(5&,$

/$)H#$!&C#"$-?EE1.$H*'$*$-#*1#K$6*'#$(&$!"#8#,($F*+*;#$G"&+$[225K#,(*1$I*(#"$L,("?'5&,$*,K$5'$0?11.$6-[$*,K$6:$6&+E15*,($

/$D?51($C5(H$*$F?"*R1#$-(*5,1#''$-(##1$6H*+R#"$(&$!"&1&,;$>5G#$*,K$:15+5,*(#$S1("*85&1#($>5;H($F#;"*K*(5&,$

/$)H#$-518#"g$L6:$!&C#"$-?EE1.$75'?*11.$F5'E1*.'$(H#$J#+*5,5,;$>*+E$>5G#$*,K$C511$-&?,K$*,$[1*"+$(&$O&(5G.$CH#,$O#2#''*".$

/$)H#$-.'(#+$5'$:*'.$(&$N*5,(*5,$*,K$-#"852#$/$7&1(*;#h$QQU$%$\\U$%$\WU7$TU$%$PUBd$

'

(0"1%2%1)&%#*/''

3456'789:;5' 9>@;='

8Y(Y'38:=BA'I;4=6I'CLP'9c'd'A9eD'

C?39D'

<BF84'(647@45@''''''''COK'9c'd'A9eD'

C?39D'

7(-'d';34'CQK'9c'd'A9eD'

C?39D'

5;4A6>5'CB7D'

A>765>==;5'CB7D'

B7=;6'd'>86=;6'3>56'(B!;'

CB7D'

(IB33B7?'H;B?I6'C=:(D'

3>H;5'A>7(8936B>7'

CHD'

6>64='5877B7?'6B9;'

AI49:;5'946;5B4=' <>=64?;'

JKNQKL' 7!PUU$ @UZU$ WUZU$ \\ZU$ WUZPV$Y$WZTU$$$$$$$$$$$$ O%[$ Q$NO!)$ QX$ VA$ O%[$ O%[$ Q\U$

JKRNNK' 7!PUUN$ @UZU$ WUZU$ \\ZU$ WUZPV$Y$WZTU$$$$$$$$$$$$$$$O%[$ Q$NO!)$ QX$ VU$ O%[$ O%[$ \WU$

JKNOON' 7!XTU$ PUZU$ @PZU$ WTZU$ @T$Y$WZTU$ O%[$ Q$Q%\$NO!)$ \X$ XP$ O%[$ O%[$ QQU$

JKNOQK' 7!XTU$ PUZU$ @PZU$ WTZU$ @T$Y$WZTU$ O%[$ QQ%\$NO!)$ \X$ XP$ O%[$ O%[$ \\U$

k$01&C$"*(#'$'(*(#K$*($XT]$S7)$:`>$$

!

!

!

!

!

17 - 3


!+""

8$&,)S%#$"&'(&",%$%b",/'

!"#$%$!&'($)"#*(+#,($-.'(#+'$$$

8$&,)S%#$"&'(&",%$%b",/'MK'?39' ''S1("*85&1#($-(#"515d#"'$*"#$*$"#15*R1#_$#2&,&+52*1$*,K$2H#+52*1=G"##$C*.$(&$'*G#;?*"K$K"5,35,;$C*(#"$5,$+&'($2&++#"25*1$*EE152*(5&,'Z$S1("*85&1#($eS7f$(#2H,&1&;.$5'$+&"#$#GG#2(58#$(H*,$2H1&"5,#$5,$K#'("&.5,;$2#"(*5,$C*(#"$R&",$2&,(*+5,*,('_$C5(H&?($*1(#"5,;$(H#$(*'(#$&G$C*(#"Z$)H5'$+*3#'$5($*$E"*2(52*1$E"&2#''$G&"$("#*(5,;$C*(#"$?'#K$G&"$K"5,35,;$*,K$G&&K$E"#E*"*(5&,Z$

)H#"#$*"#$,&$K5'5,G#2(5&,$R.=E"&K?2('$C5(H$(H#$?'#$&G$S7_$CH52H$5'$'*G#$*,K$2H#+52*1$G"##Z$0?"(H#"+&"#_$S7$K&#'$,&($*1(#"$C*(#"$2H#+5'(".$*,K$5('$2&,'(5(?#,('_$'?2H$*'$EB_$(*'(#_$&K&"$&"$2&1&"Z$

'

'

(&)*+),+'-")&.,"/'' '

/$:b?5EE#K$(&$L,*2(58*(#$6H1&"5,#=J#'5'(*,($!*"*'5(#'$'?2H$*'$6".E(&'E&"5K5?+$*,K$^5*"K5*_$B*"+G?1$D*2(#"5*$153#$:Z6&15$*,K$75"?'#'$,&($75'5R1#$(&$(H#$O*3#K$:.#$

/$)H#$J#8&1?(5&,*".$[+*1;*+$>*+E'$>*'($?E$(&$)C&$j#*"'_$J#K?25,;$N*5,(#,*,2#$J#b?5"#+#,('Z$)H#$6&&1)&?2H$-5;,5G52*,(1.$J#K?2#'$I*(#"$)#+E#"*(?"#$*,K$F&#'$O&($I*'(#$[,.$I*(#"$

/$)H#$!&C#"$-?EE1.$H*'$*,$L,(?5(58#$L,(#"G*2#$-H&C5,;$j&?$(H#$!#"G&"+*,2#$&G$(H#$-.'(#+$

/$:*'.$i?*"(#"=)C5'($[''#+R1.h$[$i?*"(#"=)C5'($(&$(H#$!&'5(58#$-(&E$*,K$j&?l"#$F&,#Z$O&$)&&1'$*,K$O&$J5'3$&G$`8#"$)5;H(#,5,;$

/$I5(H$(H#$!?'H$&G$*$D?((&,$j&?$6*,$6&,G5"+$(H#$!"&E#"$`E#"*(5&,$&G$(H#$-#,'&"$

/$[11$6&,,#2(5&,'$*"#$6&1&"$6&K#K=-5+E1.$!1?;$*,K$!1*.m$/$7&1(*;#h$QQU$%$\\U7$TU$%$PUBd$

'

(0"1%2%1)&%#*/''

3456'789:;5' 9>@;='

8Y(Y'38:=BA'I;4=6I'

CLP'9c'd'A9eD'C?39D'

<BF84'(647@45@''''''''COK'9c'd'A9eD'

C?39D'

7(-'d';34'CQK'9c'd'A9eD'

C?39D'

5;4A6>5'CB7D'

A>765>==;5'CB7D'

B7=;6'd'>86=;6'3>56'(B!;'

CB7D'

(IB33B7?'H;B?I6'C=:(D'

3>H;5'A>7(8936B>7'

CHD'

6>64='5877B7?'6B9;'

AI49:;5'946;5B4=' <>=64?;'

JKNOQL' !J`TU$ O%[$ TUZU$ O%[$ @Q$Y$@ZU$ QW$Y$PZT$ \$NO!)$ O%[$ \WU$ j#'$ WU@$--$ QQU$

JKNOQJ' !J`TU$ O%[$ TUZU$ O%[$ @Q$Y$@ZU$ QW$Y$PZT$ \$NO!)$ O%[$ \WU$ j#'$ WU@$--$ \\U$

JKNOQO' no$ O%[$ O%[$ AUZU$ @Q$Y$@ZU$ QW$Y$PZT$ \$NO!)$ O%[$ \WU$ j#'$ WU@$--$ QQU$

JKNOQQ' no$ O%[$ O%[$ AUZU$ @Q$Y$@ZU$ QW$Y$PZT$ \$NO!)$ O%[$ \WU$ j#'$ WU@$--$ \\U$

k$01&C$"*(#'$'(*(#K$*($XT]$S7)$:`>$$

!

!

!

!' '

17 - 4


!&""

@"$%S",_'3.\0/'F#158#".$-&1?(5&,'$

$$

?,.*+2#/'(1)$)J^(",%"/'@"$%S",_'3.\0/'

^"?,KG&'$-2*1*\=-#"5#'$F#158#".$!?+E'$*"#$2&+E*2($C*(#"$'?EE1.$E?+E'$K#'5;,#K$G&"$K&+#'(52$*,K$2&++#"25*1$*EE152*(5&,'Z$!?+E$E*"('_$CH52H$*"#$(.E52*11.$8?1,#"*R1#$(&$K5GG52?1($15b?5K'$&"$E*"(52?1*"1.$K#+*,K5,;$&E#"*(5,;$2&,K5(5&,'_$2*,$R#$&E(5+5d#K$G&"$(H#5"$E?"E&'#$*,K$K#'5;,#K$G&"$'E#25G52$"#b?5"#+#,('Z$

$$

'

(&)*+),+'-")&.,"/'' '

/$[Ka?'(*R1#$6&,'(*,($!"#''?"#$/$-#1G=!"5+5,;$/$6&+E*2($

/$J&R?'($*,K$J#15*R1#$/$F".$J?,,5,;$!"&(#2(5&,$/$L,(#115;#,($!?+E$6&,("&1$

/$:*'.$(&$`E#"*(#$/$>&C$O&5'#$/$D?51($(&$>*'($

$

'(0"1%2%1)&%#*/'

3456'789:;5' <>=64?;' ?39' 3(B' 587'493('

(6456'493(' H4664?;' I3' 7;6'H;B?I6'

=:('

JLKOOO' Q$Y$QQU$=$Q\U_$PUBM$ QP$ \\$=$AU$ T$ TZV$ TPU$ ZVT$ \\$

JLKORR' Q$Y$\\U$=$\@U_$PUBM$ QP$ \\$=$AU$ \ZW$ \ZA$ TTU$ ZVT$ \\$

>3;546B7?'(3;AB-BA46B>7('

94XB989'(G(6;9'35;((85;'C3(BD' Q@T$

94XB989'B7=;6'35;((85;'C3(BD' AV$

94XB989'(8A6B>7'=B-6'C-6D' \P$

94XB989'=BF8B@'6;93;54685;'Cj-D' QQW$

94XB989'49:B;76'6;93;54685;'Cj-D' QWQ$

6;AI7BA4='B7->'

<>=64?;'6>=;547A;(' =QZPPPPPPPPV$

;7A=>(85;'A=4((' <@F$

B7(8=46B>7'A=4((' D$

(>87@'35;((85;'=;<;=' q$@V$KDe[f$

4?;7AG'4335><4=(' S>_$2S>_$6:$

$

""""""""""""""

"

!

,-./"0"%'(01" 12345"67"8"9:;67<:9:="<98=:>89?"@A"12345"B8<:9".:CDE@F@;6:7G" +'H!("""""" I#+!("12345"B8<:9".:CDE@F@;6:7$

',&5(?1&-."#851F#@"$%S",_'3.\0/

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

'@"$%S",_'3.\0/

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

',&5(?1&-."#851F#

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

&"GG&";,#K$5K#'(52"*$E""$E$&'5K?15b

*,K$25(#'K&+*2-'&GK,?^"

/#2+*.?,

'

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

Z'#,(#+"#b?5"25G5E#2'$2;(5,*"#E$&;5,K,*+#$K1."1*?(52?+!Z&,'5*(25*EE1*152#"+&+2*,K$#$*"'E+!?."#851#F'#5"-#=\*1*

_,"S%$"@/"%,("^J)$)1(

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

"$G&K#5d(5+E$&#$R,*_$2',5(5&K,&$2,#"?18.1*12E5.(#$*"H$2H5C_'(E*"E$

E'E?+.?EE1'#"*(C(E*2&+2#$

/0\3.

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

K,$*#'&E"?$E5"#$(H"$(?125GGGGK5&$(#$*R1,#"

&"GG&";,#K$5K#'

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

",.&)"-+,)+*)(&

(2*E+6&/$;,5+5!"=GG=1-#/$

*(',&6#1R*('?a[K/$

/*#%&)1%2%1"(0

3456'78' 9:;5

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

/"

#"?''#!"(,

115;(#L,/$.F"/$RJ&/$

;?46=<> 9?3

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

1&(",&$6E+?($!,#115;,&5(2#(&"!;,5,,J?

#1R*51J#K,*('?

3(B 587

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

('*>&((15D?/$#'5O&>&C/$

#(*"#E`&(.':*/$

(6456 H4664?; I3

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

I3 6I?BH;67;

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

3456'78' 9:;5

LKOOOJ Q$Y$QQU$

JLKORRR Q$Y$\\U$

94XB989'(G(6;9'35;((85;'C3(BD

94X ' ' 'XB989'B7=;6'35;( '

94XB989'(8A6B>7'=B-6'

94XB9 =BF8B@'6;93;54685;'989

49:B;76'6;93;54685;'94XB989'

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

;?46=<> 9?3

Q\U_$PUBM=Q$Y$QQU$ QP

\@U_$PUBM=Q$Y$\\U$ QP

94XB989'(G(6;9'35;((85;'C3(BD

94XB989'B7=;6'35;((85;'C3(BD

D-6C94XB989'(8A6B>7'=B-6'

Dj-C=BF8B@'6;93;54685;'

Dj-C49:B;76'6;93;54685;'

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

3(B (349587

AU=\\$ T

AU=\\$ \ZW

>3;546B7?'(3;AB-BA46B>7(

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

493((6456 H4664?; I3

TZV TPU ZVT

\ZA TTU ZVT

Q@T

AV

\P

QQW

QWQ

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

I3 (=:6I?BH;67;

ZVT \\

ZVT \\

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

49:B;76'6;93;54685;'94XB989'

<>=64?;'6>=;547A;(

;7A=>(85;'A=4((

B7(8=46B>7'A=4((

( ' '(>87@'35;((85 '

4?;7AG'4335><4=(

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

Dj-C49:B;76'6;93;54685;'

<>=64?;'6>=;547A;(

;7A=>(85;'A=4((

B7(8=46B>7'A=4((

(>87@'35;((85;'=;<;=

4?;7AG'4335><4=(

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

6;AI7BA4='B7->

QZPPPPPPPPV=

q$@V

S>_$2S>

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

QWQ

QZPPPPPPPPV

<@F

D

KDe[fq$@V

_$6:S>_$2S>

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $10%'(0/.,-

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $;:987654312

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $G7:6@;DE@FC:.9:<8B54231@A?98>:=89<=:9:<76;

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $1(!+I#(H!+'

""

'$ $

$$

' ' ' '

$ $ $ $ $ $ $ $ $$ $ $ $ $ $

$$ $ $

$$

'

' '' '

$ $ $$

$

$ $ $$ $ $

$

$ $ $$ $$ $ $

$

' '

' ' ' ' ''

'' ' ' ' '

'

' $ $ $ $ $ $ $ $ $ $

' $ $ $ $ $ $ $ $ $ $

'

' $

' $

' $

' ' $

' $

'

' $

' $

' $

' $ $

' $

$

""""""""""""""

"!

!

" " " " " " " " " " " " """""" " " " $

!&

7:6;@F@EDC:.9:<8B54321

18 - 2


!!""

:$)++",'6)*f/'-(&"*;#$-&1?(5&,'$$

3Y4Y;Y'9"&)$':$)++",'6)*f/'

!Z[Z:Z$N#(*1$D1*KK#"$)*,3'$*"#$+*,?G*2(?"#K$(&$(H#$H5;H#'($b?*15(.$'(*,K*"K'$*,K$"*,;#$5,$'(&"*;#$2*E*25(.$G"&+$\$(&$\A$;*11&,'Z$)*,3'$2&+#$C5(H$*$'(*5,1#''$'(##1$'.'(#+$2&,,#2(5&,Z$F#'5;,#K$G&"$"#'5K#,(5*1$*,K$15;H($2&++#"25*1$J`$*EE152*(5&,'_$(H#'#$(*,3'$*"#$+*K#$G"&+$0F[$15'(#K_$G&&K$;"*K#$+*(#"5*1'Z$

)H#'#$!Z[Z:Z$(*,3'$G#*(?"#$*$"#15*R1#$K5*EH"*;+$K#'5;,_$*,K$*"#$E&'(=2?"#K$R#G&"#$*''#+R1.$(&$#15+5,*(#$(H#$E&''5R515(.$&G$&K&"'$G"&+$(H#$(*,3Z$)H#'#$N#(*1$D1*KK#"$)*,3'$*"#$O-0=TA$2#"(5G5#K$*,K$*1'&$G#*(?"#$*$'5K#$+&?,(#K$*5"$8*18#Z$)*,3'$2&+#$'(*,K*"K$5,$CH5(#p$H&C#8#"$(H#.$*"#$*1'&$*8*51*R1#$5,$R1?#Z$

-")&.,"/'' ''

$

$

$

$

$

(0"1%2%1)&%#*/'' '

3456'789:;5' 647E'<>=89;''C?4=D'

@B49;6;5'CB7D'

I;B?I6''CB7D'

(G(6;9'A>77;A6B>7''CB7D'

JKKNOL' @Z@k$ QQZU$ QWZU$ Q%@$O!)$

JKKNOQ' Q@ZUk$ QTZ@$ \\ZP$ Q%@$O!)$

JKKNOM' Q@ZUk$ QTZ@$ \\ZP$ W%@$O!)$

JKKNOP' \UZUk$ QTZ@$ WUZW$ W%@$O!)$

k$F"*C$K&C,$2*E*25(.$

!

!

!

!

!

!

!' '

/$N*K#$G"&+$0F[$>5'(#K_$0&&K$^"*K#$$$$N*(#"5*1'$/$J#15*R1#$F5*EH"*;+$F#'5;,_$!&'($6?"#K$$$$D#G&"#$/$F5'2H*";#'$:GG525#,(1.$5,$*$7#"(52*1$&"$$$$B&"5d&,(*1$!&'5(5&,$/$[''#+R1.$:15+5,*(#'$(H#$!&''5R515(.$&G$$$$`K&"'$G"&+$(H#$)*,3$

/$N*Y5+?+$I&"35,;$!"#''?"#$5'$QUU$E'5$/$O-0$TA$6#"(5G52*(5&,$/$-(*5,1#''$-(##1$)H"#*K#K$-(#+$/$F#'5;,#K$G&"$J`$[EE152*(5&,'$/$-5K#$N&?,(#K$[5"$7*18#$/$)*,3$-(*,K$L,21?K#K$

',&5(?1-&#;*"&-(:$)++",'6)*f/

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

',&5(?1-&#;*"&-(

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

H#$(#$,*(5+5#1Z:Z[Z!#$)H#'

"$;K&_$G&K(#15'"&GK#,;5'F#*E2*#;*"&'(1*(#N:Z[Z!Z

&"9;YY43Y

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

*,3(H#$(&+"G'&K&"&G.(51R55'E&'*;+*EH"K5#*R15#1"*$#$?"#*(G#'*,3(

Z1'5*"(#*$+#K*"*52"#++&2(H;51K,*1*5(,#K5'#"3'$,*)'Z,&11*;A\&(\+&"G.$(25#K$?"(*2*,?G*+#$*"'3,*)"#KK*D1

/f*)6,"++)$:$)&

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

')*,3*KK#"1D*1#(N#$#')HZ*,3#"2?=(E&'#$*"*,K$;,_5K#'*;+

'3,*(#'#H(_',&5(*251EE*J`$1*'.'(1##'(''$#1,5*'(*H(5C#+2&3'$

*,K*"('.(5b?*1(;H#'H5H#$(&$(#K$

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

TA$=0-O#$*"&(.$1R+''#*#"&GG&#RK

F[0+&"G#K*+#"*Z,&52(#,,2&+#'.'(

5,*,;#$"*,K$K'*,K*"

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

/".,&)-"

1*5*8&$'*1#$*"*K,*K#5G5("2#

H#$(#$,*(5+5#1

'1*5"#(N*&+"G*K#$N/

#"&GD#$F1#R*51J#/$

1*(,&d5"B&#';"*H2'F5/$

.$1R+#'['/$

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

?#ZR1,$5#$*R11"5*K#(,?&+#K'5*#"?(*#G'&1**,3(H#$(&+"G'&K&"&G.(51R55'E&'

*K#"^0&&K$#K_('>5[0F&+

K#"?($6'&_$!,5;'#$F+;*"HE5*

,&5(5'&!&"*125(#"7*$,$5.1#,(525GGGG:#'

G&.$(515R''5&!#H('$#(*,5+51:

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

,5K"*K,*'(#+2&3'$,*)Z8#18*"')*,3*KK#"1D*1#(N#$#')HZ*,3

#"!;,53"&I+$+?5YN*/$,&5(*25G5("6#AT0O-/$K*#"H)1##-(''#1,5*-(/$251EE[J`$"&GG&K#,;5'F#/$#817*"[5K#(,?&N#K-5/$

?K#K1,2L*,K$(-)*,3/$

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

.$#H("8##C&Hp#(5HC,TA$0-O#$*"

5'EUUQ'5#"?''

+#-(K#',&5(*2

#

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

/*#%&)1%2%1"(0

34 '456'789:;5

JKKNOL

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

D?4=C647E'<>=89;'

@Z@k

+&"G'"&`K.$

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

DB7C@B49;6;5

QQZU

3,*)#H(+.$

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

DB7CI6?BI; (G(6

QWZU

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

D7CB7>B6;A77>A;9(G(6

Q%@$O!)

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

JKKNOQ

JKKNOM

JKKNOP

k$F"*C$K&C,$2*E*25(.

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

Q@ZUk

Q@ZUk

k\UZU

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

QTZ@

QTZ@

QTZ@

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

\\ZP

\\ZP

WUZW

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

Q%@$O!)

W%@$O!)

W%@$O!)

""

'$ $

$

' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $$

'' ''

$

$

$

$

$

'' '

' ''

''

'''

' '''

' $ $ $ $

' $ $ $ $

' $ $ $ $

' $ $ $ $

$

!

!

!

!

!

!

!' '

$ $ $ $ $$$$ $

$$$$ $

$ $ $ $$$$ $ $

$ $$$$ $ $ $ $

$ $ $ $ $$ $ $

$ $ $ $$ $ $

$ $ $ $$ $

!!19 - 2


!#""

:$)++",'6)*f/'-(&"*;#$-&1?(5&,'$$$

3"*&)%,'5>\)&"'-%T",W$)//':$)++",'6)*f/'

!#,(*5"$J`+*(#$05R#";1*''$D1*KK#"$)*,3'$*"#$H5;H=E#"G&"+*,2#_$H5;H=8*1?#$8#''#1'$G&"$"#'5K#,(5*1$*,K$2&++#"25*1$"#8#"'#$&'+&'5'$*EE152*(5&,'Z$-E#25G52*11.$K#'5;,#K$G&"$"#8#"'#$&'+&'5'$'.'(#+'_$(H#'#$'+*11$8#''#1'$&GG#"$R5;$*K8*,(*;#'$&8#"$2&+E#(5(58#$(*,3'$85*$QUU]$'#*+1#''_$2&+E&'5(#$2&,'("?2(5&,$*,K$(H#$*R515(.$(&$K5'2H*";#$5,$*,.$E&'5(5&,Z$J`+*(#$8#''#1'$*1'&$2&+#$C5(H$*$T$.#*"$C*""*,(.Z$

$$

$

$

$

(&)*+),+'-")&.,"/'' '

/$QUU]$-#*+1#''$6&+E&'5(#$6&,'("?2(5&,$

/$!"&K?2#K$?'5,;$O-0$*,K%&"$0F[$>5'(#K$N*(#"5*1'$

/$:,85"&,+#,(*11.$-*G#_$QUU]$>#*K=0"##$

/$!"#=L,'(*11#K$L,1#(=`?(1#($[''#+R1.h$6&+#'$C5(H$-.'(#+$6&,,#2(5&,'_$-*85,;$)5+#$*,K$N&,#.$

/$N##('$-("5,;#,($S-$J#b?5"#+#,('$G&"$I*(#"$6&+E&,#,('$

/$I511$,&($L,("&K?2#$6H#+52*1'$&"$:1#+#,('$5,(&$I*(#"$

/$0*2(&".=D*23#K$T=j#*"$I*""*,(.$/$F5'2H*";#'$5,$*,.$!&'5(5&,$

'

'(0"1%2%1)&%#*/'

3456'789:;5' 9>@;=' (G(6;9'A>77;A6B>7'CB7D'

I;B?I6'CB7D'

@B49;6;5'CB7D'

A434AB6G'C?4=D'

4((;9:=G'C=:(D'

JKKNQK' J`+*(#$\U$ Q$NO!)$ W\ZUU$ QPZUU$ QXZAU$ QXZUU$

JKKNQJ' J`+*(#$@U$ Q$NO!)$ TVZUU$ QPZUU$ @UZWU$ WUZUU$

JKKNQO' J`+*(#$AU$ Q$NO!)$ TTZ\T$ \@ZUU$ APZVU$ TA$

946;5B4=('>-'A>7(658A6B>7'

B77;5'=B7;5' BL^B$F:O-L)j$!`>j:)Bj>:O:$

>86;5'(I;==' 0LD:J^>[--=I`SOF$[OF$:!`<j$J:-LO=-:[>:F$

6;AI7BA4='(3;AB-BA46B>7('

94XB989'>3;546B7?'35;((85;'C3(BD' Q\T$

94XB989'>3;546B7?'6;9Y'Cg-D' Q\U$

$$ $

$

' '

',&5(?1-&#;*"&-(:$)++",'6)*f/

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

',&5(?1-&#;*"&-(

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

5C#$&+2&$'*12&''_#1+*'##+('.''5&'+&',*1*5(,#K5'"#+`J"5*(,!#

>5,%)&*3"

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

.Z(,*""*C"*.#T*$H$(*#H(K,*,&52(?"'(,2&#('5&E+#"G&GGG'#1'#'81*1+'#$H#'(_'#+'5'&+'&#"'#8"#1*5"2#++&2K,*"'3,*)"#KK*D1''*1;"#R50#(*

"++)$://)$W,"T%-"&)\>

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

&5('5&E.$,*,5#;"*'2H5K&(.$(515R85(5E#(&+2#"&8*;#'*,(*K8;$R5;5'#K.11*25G52#E-Z',&5(*251EE*18*=;HH5#_*,2+&"G&E#"=;HH5#$*"

/*f6),"

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

'$1''#8##(*+`JZ,&]UU$Q5*$8'3,(*#8#"'#8"#"$&GK#,;"&G'$1''#8##?

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

",.&)"-+,)+*)(&

-O;,'5?K2#?K&!"/$&,5(?2"(&,'6

6'#'1#*+-QUU]/$

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

/"

K(#5'>[F0"&%K,*0-

#$(5E&'&+

5*8-&+6=#!"/$

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

&,#.NK,$*#5+),;5_&,'5(&,,#26+#.'(-H$(5C#'&+.h1R+''#[#(1?(`=(#,1L#K$1*1(,'L=

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

.h

j=T#K3*2D=.&"(0*2/$#"*(I(&$5,(',#+1#:H#+6#$&K?2",(L(&,11I5/$

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

.*,("*"I#*"j

&"'*125H#+

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

*G-.1*1#,(&,+"58:,/$'*15#"*(N

/*#%&)1%2%1"(0

3456'789' 9:;5 9>@;=

JKKNQK J`+*(#$\U

JKKNQJ J`+*(#$@U

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

#"#0=#*K>QUU]#_*G #"*(I#N#/$

9>@;= CB7D(G(6;9'A>77;A6B>7'

J`+*(#$\U Q$NO!)

J`+*(#$@U Q$NO!)

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

'E&,#,(&+6#"G'#,(#+"#b?5J-($S,#;5,("-'(#

DB7CI;B?I6

B7C@B49;6;5

W\ZUU QPZUU

TVZUU QPZUU

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

&"G& &'!.,*,5'#;"*H2'F5/$

D@B49;6;5

D?4=CA434AB6G

QPZUU QXZAU

QPZUU @UZWU

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

&,5(5&'

D=:(C4((;9:=G

QXZUU

WUZUU

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

JKKNQO J`+*(#$AU

B77;5'=B7;5

>86;5'(I;==

94XB989'>3;546B7?'35;((85;'C3(BD

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

J`+*(#$AU Q$NO!)

94XB989'>3;546B7?'35;((85;'C3(BD

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

TTZ\T \@ZUU

946;5B4=('>-'A>7(658A6B>7

BL^B$F:O-L)j$!`>j:)Bj>:O:

0LD:J^>[-- I`SOF$[OF$:!`<j$J:-LO=-

6;AI7BA4='(3;AB-BA46B>7(

Q\T

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

\@ZUU APZVU

BL^B$F:O-L)j$!`>j:)Bj>:O:

-:[>:F=I`SOF$[OF$:!`<j$J:-LO

Q\T

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

TA

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

94XB9 '>3;546B7?'6;9Y'Cg-D989'

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

>3;546B7?'6;9Y'Cg-D

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

Q\U

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

Q\U

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

""

'$ $

$$

' ' ' ' '

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $

$ $ $

$$

$

$

$

' '' '

$ $$

$ $ $ $ $ $$

$ $ $ $

$ $$ $ $$ $ $$ $ $ $$ $

$ $ $ $$ $$ $ $

$ $ $ $

'

' '

' ' ''

''

''

''

'

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

'

' $

' $

'

' $

' $

$$ $

$

' '

!#19 - 3


!$""

4&\#/0[",%1'6)*f/'-(&"*;#$-&1?(5&,'$$$

4&\#/0[",%1'6)*f/'

[(+&'EH#"52$)*,3'$H&1K$C*(#"$G&"$E#*3$K#+*,K$*,K$&E(5+5d#$(H#$'(&"*;#$&G$J#8#"'#$`'+&'5'$*,K$H5;H=E?"5(.$C*(#"Z$-(*,K*"K$'(&"*;#$(*,3'$*"#$2&,'("?2(#K$?'5,;$0F[="#;?1*(#K$G&&K$;"*K#$+*(#"5*1'Z$

)&$2&+E1#(#1.$2?'(&+5d#$.&?"$C*(#"$("#*(+#,($'&1?(5&,_$(*,3'$*"#$*8*51*R1#$5,$8*"5&?'$'5d#'_$+*(#"5*1'$*,K$2&,G5;?"*(5&,'Z$)H#'#$(*,3'$2*,$R#$?'#K$G&"$G*"+$&E#"*(5&,_$85,#.*"K_$*;"52?1(?"*1$5""5;*(5&,_$G5"#$E"&(#2(5&,_$C*(#"$("#*(+#,($&"$*,.$&(H#"$C*(#"$"#1*(#K$?'#'Z$

$

$

'(0"1%2%1)&%#*/'

3456'789:;5' HB@6I'CB7D'

I;B?I6'CB7D'

<>=89;'C?4=D'

JKKNQQ' Q@$ \@$ QTZU$

JKKNQM' QA$ WW$ WTZU$

JKKNQP' QA$ TW$ TUZU$

JKKNQU' \A$ @W$ QUUZU$

JKKNQR' WU$ V\$ \UUZU$

JKKNQN' WP$ VX$ WUUZU$

JKOJNL' @A$ VW$ TUUZU$

JKOJNJ' @A$ QUW$ VTUZU$

JKOJNO' @A$ QQA$ ATUZU$

JKOJNQ' P@$ AU$ QUUUZU$

$

!' '

4S)%$)T$"'9)&",%)$/')*+'@"/%W*/' 4S)%$)T$"'(%b%*W'>0&%#*/'$

/$6"&''=>5,3$!&1.#(H.1#,#$/$B5;H=F#,'5(.$!&1.#(H.1#,#$/$J#5,G&"2#K$05R#";1*''$/$-(*5,1#''$-(##1$/$6&,52*1$D&((&+$/$01*($D&((&+$/$F&+#$)&E'$/$7#"(52*1$&"$B&"5d&,(*1$`"5#,(*(5&,$

/$-(*,K*"K$)*,3'$J*,;#$5,$-5d#$G"&+$QT$(&Q_UUU$^*11&,'$

/$>*";#"$)*,3'$*"#$[8*51*R1#$)H"&?;H$-E#25*1$`"K#"$

$

',&5(?1-&#;*"&-(6)*f/4&\#/0[",%1

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

6)*f/

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

',&5(?1-&#;*"&-(

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

#5"_$G,(5&*5;"5"K,*'1*5"#(+*.#1#(E1&+2)&$

Z'1*5"#(+*E?"=;HH5*,K$25"#HE'&+[(

"[0/#\4&

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

*,.&"(,#(+*#(""(#*_$C,(5&2(#&"$E*2'3,*(#'#H)Z',&5(*"?;5G,&2K#,(+#*("(#"*(C&?".#$d5&+(?'2.

*,3(*;#$&"('K$*,K*"(-Z#"*(C.(5E?"K#+E#*3&"GG&"#"*(CK$H&1'3,*)

/*f6)1%,"

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

Z#'?'#K$*(#1"#"*(CH#"&(*,.8_,&5(*"#E&+$"*GG*"&GG&K#'?#R,*#$*R11*5*8#$*"'*,3(&,_5?(&1'#,(

=[0F,;$5?'#K$(?2"(&,'2#$*"'*,3&G*;#$&"('H#$(#$d5+5&E(*,K$*,K$K#+

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

1*"?(1?25";*_K"*.#,58'_d#'5'$?&5"8*,5

#K"*;K&&GK#(*1?;"#'5&'+'`#$'#"#8J&G

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

#5"_$G,(5&*5;"5"

"$T)$%)4S

B"&1*25("7#/$&E')#+F&/$&+(&(D*(01/$&(D1*25,6&/$-''#1,5*-(/$K#2"&G,5J#/$

#,'F=H;B5/$35,>=''&6"/$

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

*,.&"(,#(+*#(""(#*_$C,(5&2(#&"$E

/*W%/@"+*)/$)%,"&)9

,&5(*(,#"5`*1&,(d5&"B&E'&+

&+(&(1#(#-

''1*;"#5R0#,#1H.#(.&1!.(5#,'

#,#1H.#(.&1!3

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

Z#'?'#K$*(#1"#"*(CH#"&(*,.

&0>W*%b%("$T)$%)4S

"#"K`*15E#2-R*158*[#$*"'*,3);#">*"/$

&,'1*1^UU_UQ(&5*,;#$J'*,3)K"*K,*-(/$

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

/*#%&

&?;H$H")#1R

T$Q+&$G"#5d-,$5

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

/*#%&)1%2%1"(0

3456'789:;5

JKKNQQ

JKKNQM

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

3456'789:;5 DB7CHB@6I

Q@

QA

B"&1*25("7#/$

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

B7C?BI;

\@

WW

,&5(*(,#"5`*1&,(d5&"B

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

DB7I6? <>

\@

WW

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

D=4C?;98=<>

ZUQT

ZUWT

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

JKKNQP

JKKNQU

JKKNQR

JKKNQN

JKOJNL

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

QA

\A

WU

WP

@A

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

TW

@W

V\

VX

VW

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

TW

@W

V\

VX

VW

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

ZUTU

ZUQUU

ZU\UU

ZUWUU

ZUTUU

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

JKOJNJ

JKOJNO

JKOJNQ

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

@A

@A

P@

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

QUW

QQA

AU

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

QUW

QQA

AU

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

ZUVTU

ZUATU

ZUQUUU

""

' '$ $

$$

' '

$ $ $ $ $ $ $$ $ $ $ $ $

$

$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$

$

' '

' ''

''

''

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

' $ $ $

$

!' '

' ' ' ' ' ' '$

$ $$ $

$ $$ $$ $

$ $$ $$ $ $ $

$ $ $$ $$ $ $$ $

$

!$19 - 4


!%""

-$#)&'(Z%&1["/'-(&"*;#$-&1?(5&,'$$$

:%W'(Z%&1[h'-$#)&'(Z%&1["/'D5;$-C5(2H4$01&*($-C5(2H#'$*"#$"*(#K$*($QT$*+E'_$CH52H$*11&C'$(H#$'C5(2H#'$(&$R#$?'#K$&,$R&(H$'+*11$*,K$1*";#$H&"'#E&C#"$E?+E'Z$)H#'#$'C5(2H#'$*"#$*1'&$#,85"&,+#,(*11.$'*G#$C5(H$*$E*(#,(#K$+#2H*,52*1$'C5(2H5,;$+#2H*,5'+$(H*($#15+5,*(#'$(H#$?'#$&G$H*d*"K&?'$+#"2?".Z$)H#$H5;H$b?*15(.$K#'5;,$?(515d#'$*$H5;H$,?+R#"$&G$G5,#$'("*,K#K$2&EE#"$C5"#'$CH52H$+*3#'$G&"$*,$#Y("#+#1.$G1#Y5R1#$K?"*R1#$2*R1#Z$

-")&.,"/'' ''/$!*(#,(#K$N#2H*,52*1$F#'5;,$

/$!76$01&*($B&?'5,;$

/$B#*8.$F?(.$6*R1#$

/$`+,5=F5"#2(5&,*1$

/$S>$>5'(#K$%$W$j#*"$I*""*,(.$

$

(0"1%2%1)&%#*/''

3456'789:;5'-=>46'I>8(B7?'

@'V'='CB7D'

<>=64?;'C5)&"+')&'LM'4\0/D'

C<D'3$.W' 3.\0''

C80'd'@#Z*D'(HB6AIB7?'@B--;5;76B4='CNK'@"W,""/i'3.\0'5)*W"D''

CB7D'

JKKNLP' WZ\T$Y$@ZTT$ QQU$ !5;;.$R*23$ F&C,$ A$=$\\$$

JKKNLU' WZ\T$Y$@ZTT$ \\U$ O&,#$ SE$ A$=$\\$

JKKNLR' WZ\T$Y$@ZTT$ QQU$ !5;;.$D*23$ F&C,$$ A$=$\\$

JKKNLN' WZ\T$Y$@ZTT$ \\U$ O&,#$ SE$ A$=$\\$

$

!

!

!

!

!

!

!

!$

'' '

',&5(?1-&#;*"&-(-$#)&'(Z%&1["/

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

',&5(?1-&#;*"&-(

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

/".,&)-"

#Y1G.#1#+"(#YK#'.(5b?*1;H$H5#2+#K$#,(E*(;"*1K,*11*'+014H2(5-C;D5

[1&%Z(W:%

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

#Z*R12#$*R1K?"#$R15#Y&GR#",?+;H$H5*$#'d515?(;,$5K#'(+'H*,5#2+,;$H52(5C'*12H*,5#2'C'##H)'ZE+?E"#C&E'#"&H#;*+QT$*(#K$*("#$*"H#'2(5C-&*(01

/["1&%Z(&#)-$h[

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

5HC'$#"5C"#EE2&*,K#K"(',#$5G*"H*d&G#$?'H#$(#',*(5+5#1H*((*(,#+,&"85,#'&1*#"*'$#2H(5'C

H#'2(5C'H#$('&C1*1H$2H5C_E'*+

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

,*"&GG&'$3#*+2H)H#$Z.?"2#"+K&?'*"

*H(5C#G'*.$11*H$R&(&,$#K$?'R#$&$(H#'

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

/*#%&)1%2%1"(0

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

%K#('5>S>/

2#"F5=5,`+/

.(F?.8*B#/

(*&10!76/

NK#(,#(!*/

/".,&)-"

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

.(,*""*I"*#jW

1*,&5(2

#1R6*.

;,5'?&B

,;5'#F1*25,*H2#N

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

3456'78' 89:;5-=>46'I>8(B7?

JKKNLP

JKKNNLU

JKKNLR

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

DB7C@'V'=

-=>46'I>8(B7?

DC<L&')+&")C546=<>

WZ\T$Y$@ZTT QQU

WZ\T$Y$@ZTT \\U

WZ\T$Y$@ZTT QQU

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

DD/0\4M

;?43$.W

QQU !5;;.$R*23

\\U O&,#

QQU !5;;.$D*23

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

D*Z#@d0C80\3. ",W"@KCN

7BIA6B(H

F&C,

SE

F&C,$

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

D7CBD'"W*)50\.3i'/""=4B6;7;5--B@?7

\\$=A$

\\=A$

\\=A$

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

JKKNNLN

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

WZ\T$Y$@ZTT \\U

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

\\U O&,#

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

SE

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

\\=A$

""

'$ $

$$

' ' ' '$ $ $ $ $ $ $ $$ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $$ $ $ $ $ $ $ $ $$ $

'' ''$ $ $ $

$ $ $ $

$ $ $ $

$ $

$ $ $ $ $ $ $

$

''

''

''

'' ' '

'' ''

' ' '' '

' ' ''

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

' $ $ $ $ $ $

$

!

!

!

!

!

!

!

!$

'' '

!%20 - 2


PartNumber

Description Color Rated Membrane Size(gpd / lpd)

200986 RESTRICTOR, CAPILLARY, 125 ML / MIN, RED, 12 GPD, AXEON RED 12.00 / 45.42

200987 RESTRICTOR, CAPILLARY, 189 ML / MIN, BROWN, 18 GPD, AXEON BROWN 18.00 / 68.14

200988 RESTRICTOR, CAPILLARY, 263 ML / MIN, BLACK, 25 GPD, AXEON BLACK 25.00 / 94.54

200989 RESTRICTOR, CAPILLARY, 368 ML / MIN, YELLOW, 35 GPD, AXEON YELLOW 35.00 / 132.49

200990 RESTRICTOR, CAPILLARY, 525 ML / MIN, GREEN, 50 GPD, AXEON GREEN 50.00 / 189.27

200991 RESTRICTOR, CAPILLARY, 735 ML / MIN, BLUE, 75 GPD, AXEON BLUE 75.00 / 283.91

200992 RESTRICTOR, CAPILLARY, 1,052 ML / MIN, WHITE, 100 GPD, AXEON WHITE 100.00 / 378.54

200993 RESTRICTOR, CAPILLARY, 1,577 ML / MIN, GREY, 150, AXEON GREY 150.00 / 567.81

210184 RESTRICTOR, CAPILLARY, 2,000 ML / MIN, ORANGE 200 GPD, AXEON ORANGE 200.00 / 757.09

Capillary Flow Restrictors

MKTF-192-E AXEON is a registered trademark of AXEON Water Technologies. 09/17 ©2017 AXEON Water Technologies

ReverseOsmosisMembraneHousing

PRODUCT1/4" TUBINGWASTE

AXEON Flow Restrictors(CONCENTRATE)

AXEON Capillary Flow Restrictors easily insert into all 1/4” OD tubing located

on the membrane waste line (concentrate line) of residential reverse osmosis systems.

The length of the flow control capillary line determines the flow restriction, shorter

lengths allow water to passthrough at a higher rate, thus changing the recovery of

the system. Every flow restrictor is calibrated to ensure proper membrane life.

Benefits� Delrin Material For Increased Strength

� High Tolerance Medical Grade Tubing when Applicable

� Compatible with Quick–Connect and Compression Fittings

� Save on Shipping, Storage and Fittings

� Unique Design Prevents Clogging

� Easy Installation

� Fits All Standard Size 1/4” Tubing

21 - 2


Stainless Steel Needle Valves

MKTF-142-D AXEON is a registered trademark of AXEON Water Technologies. 12/16 ©2016 AXEON Water Technologies

AXEON Stainless Steel Needle Valves are manufactured from 316L Stainless Steel and feature a two piece,

panel mountable design allowing for flexibility during installation. A high quality valve packing provides a leak–tight

double seal with low operating torque and the safety back–seating prevents accidental removal of the stem.

Benefits� Leak–Tight Performance with

Low Operating Torque

� Easy Installation and

Serviceability

� Use in a Wide Range of

Applications

� Simple Installation

Features� 316L Stainless Steel

� Positive Drive Hand Bar

� High Pressure and

Temperature Capability

� 100% Tested

Materials of Construction� Body: 316L Stainless Steel

� Stem: 316L Stainless Steel

� Stem Tip, Hard Seat: 316L Stainless Steel

� Stem Seal: Teflon Packing

� Bonnet: 316L Stainless Steel

� Handle: 316L Stainless Steel

� Panel Mounting Nut: 316L Stainless Steel

Part Number Thread Connection(in)

MaximumOperating Pressure

@ 77°F (psi)Cv Flow Factor Panel Hole

(in / cm)

Maximum PanelThickness(in / cm)

201004 1/4 FNPT 6,000 0.34 0.64 / 1.63 0.25 / 0.635

201005 3/8 FNPT 6,000 0.50 0.64 / 1.63 0.17 / 0.48

201006 1/2 FNPT 6,000 0.50 0.64 / 1.63 0.17 / 0.48

203296 3/4 FNPT 6,000 0.62 0.64 / 1.63 0.25 / 0.635

21 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


Panel Mount Flow Meters

AXEON Panel Mount Flow Meters

have an easy–to–read scale which

has been silk–screened onto an

acrylic body. These flow meters offer

durability, accuracy and high quality.

AXEON Panel Mount Flow Meters

are offered in 1, 2, 5, 10, 20 gallons

per minute and 25, 50 and 85

gallons per hour configurations.

Features� 1, 2, 5, 10, 20 GPM and 25, 50, 85 GPH

Sizes Available

� Solid One Piece Injection Molded Acrylic Body

� Stainless Steel Float and Internals

� Models Available With 316L SS Integrated

Needle Valve

� Permanent Screen Printed Scales

� Dual Scale in GPM/LPM or GPH/LPH

� Individually Packaged

� 100% Tested for Accuracy

Technical Specifications� Body: Acrylic

� O–Rings: Silastic

� O–Rings: Viton (Needle Valves)

� Connections: Polypropylene

� Guide: 316L Stainless Steel

� Float: 316L Stainless Steel

� Valve Connections: 316L Stainless Steel

� Maximum Pressure: 125 psi

� Maximum Temperature: 120°F

� Accuracy: +/– 5% Accuracy

* Image shows integrated needle valve.

22 - 2


MKTF-143-E AXEON is a registered trademark of AXEON Water Technologies. 11/17 ©2017 AXEON Water Technologies

Panel Mount Flow Meters

Product Specifications

PartNumber

Flow Range(gpm / lpm)

Integrated316L SSValve

InnerConnection

(in)

OuterConnection

(in)

A(in / cm)

B(in / cm)

C(in / cm)

D(in / cm)

E(in / cm)

F(in / cm)

2038490.10 – 1.00 /

0.5 – 4.0No 1/4 FNPT 1/2 MNPT 6.88 / 17.46 6.63 / 16.83 5.00 / 12.70 3.00 / 7.62 1.20 / 3.05 1.35 / 3.43

2090470.10 – 1.00 /

0.5 – 4.0Yes 1/4 FNPT 1/2 MNPT 6.88 / 17.46 6.63 / 16.83 5.00 / 12.70 3.00 / 7.62 1.20 / 3.05 1.35 / 3.43

2008970.20 – 2.00 /

1.0 – 7.0No 1/4 FNPT 1/2 MNPT 6.88 / 17.46 6.63 / 16.83 5.00 / 12.70 3.00 / 7.62 1.20 / 3.05 1.35 / 3.43

2051030.20 – 2.00 /

1.0 – 7.0Yes 1/4 FNPT 1/2 MNPT 6.88 / 17.46 6.63 / 16.83 5.00 / 12.70 3.00 / 7.62 1.20 / 3.05 1.35 / 3.43

2008981.00 – 5.00 /

2.0 – 18.0No 1/4 FNPT 1/2 MNPT 6.88 / 17.46 6.63 / 16.83 5.00 / 12.70 3.00 / 7.62 1.20 / 3.05 1.35 / 3.43

2051040.50 – 5.00 /

2.0 – 18.0Yes 1/4 FNPT 1/2 MNPT 6.88 / 17.46 6.63 / 16.83 5.00 / 12.70 3.00 / 7.62 1.20 / 3.05 1.35 / 3.43

2008991.00 – 10.00 /

5.0 – 35.0No 1/2 FNPT 1 MNPT 9.13 / 23.19 8.88 / 22.54 6.50 / 16.51 4.00 / 10.16 1.78 / 4.52 1.81 / 4.60

2051051.00 – 10.00 /

5.0 – 35.0Yes 1/2 FNPT 1 MNPT 9.13 / 23.19 8.88 / 22.54 6.50 / 16.51 4.00 / 10.16 1.78 / 4.52 1.81 / 4.60

2009002.00 – 20.00 /

10.0 – 70.0No 1/2 FNPT 1 MNPT 9.13 / 23.19 8.88 / 22.54 6.50 / 16.51 4.00 / 10.16 1.78 / 4.52 1.81 / 4.60

2051062.00 – 20.00 /

10.0 – 70.0Yes 1/2 FNPT 1 MNPT 9.13 / 23.19 8.88 / 22.54 6.50 / 16.51 4.00 / 10.16 1.78 / 4.52 1.81 / 4.60

20924610.00 – 85.00 /18.93 – 321.76*

Yes 1/4 FNPT 1/2 MNPT 4.10 / 104.00 4.00 / 102.00 3.00 / 76.00 N/A 1.00 / 25.40 1.15 / 29.00

20924310.00 – 25.00 /18.93 – 94.64*

No 1/4 FNPT 1/2 MNPT 4.10 / 104.00 4.00 / 102.00 3.00 / 76.00 N/A 1.00 / 25.40 1.15 / 29.00

20924410.00 – 50.00 /18.93 – 189.27*

No 1/4 FNPT 1/2 MNPT 4.10 / 104.00 4.00 / 102.00 3.00 / 76.00 N/A 1.00 / 25.40 1.15 / 29.00

20924510.00 – 85.00 /18.93 – 321.76*

No 1/4 FNPT 1/2 MNPT 4.10 / 104.00 4.00 / 102.00 3.00 / 76.00 N/A 1.00 / 25.40 1.15 / 29.00

* Measurements shown in gallons per hour/liters per hour.

22 - 3


AXEON Inline Flow Meters have an easy–to–read scale that has been silk–screened on an acrylicbody. These flow meters offer durability, accuracy and high quality. AXEON Inline Flow Meters

are offered in 10, 20, 25, 40, 45, 60 and 70 gallon per minute configurations.

PartNumber

Range/Capacity(gpm / lpm)

ConnectionSize (in)

Dimension

A (in / mm) B (in / mm)

Inline Flow Meters

MKTF-256-E AXEON is a registered trademark of AXEON Water Technologies. 11/17 ©2017 AXEON Water Technologies

204246 1 – 10 / 4 – 36 1 FNPT 2.00 / 51 10.25 / 260

204271 2 – 20 / 10 – 70 1 FNPT 2.00 / 51 10.25 / 260

208775 5 – 40 / 20 – 150 1 FNPT 3.00 / 76 13.25 / 337

208776 20 – 60 / 80 – 220 1 FNPT 3.00 / 76 13.25 / 337

204272 4 – 40 / 15 – 150 1 1/2 FNPT 2.68 / 68 11.68 / 302

204273 6 – 60 / 20 – 240 1 1/2 FNPT 2.68 / 68 11.68 / 302

210148 20 – 100 / 80 – 360 2 FNPT 2.95 / 75 13.39 / 340

209329* 2.5 – 25 / 10 – 100 1 FNPT 2.83 / 72 13.58 / 345

209365* 2.5 – 25 / 10 – 100 2 FNPT 3.86 / 98 17.32 / 440

209330* 5 – 45 / 20 – 180 2 FNPT 3.86 / 98 17.32 / 440

209030* 7 – 70 / 25 – 250 2 FNPT 3.86 / 98 17.32 / 440

Features� Solid One Piece Injection MoldedAcrylic Body

� Stainless Steel Float and Internals

� Permanent Screen Printed Scales

� Calibrations in GPM and LPM

� Individually Packaged

� 100% Tested for Accuracy

Technical Specifications� Body: Acrylic

� O–Rings: Silicone

� Connections: Polypropylene

� Guide: 316L Stainless Steel

� Float: 316L Stainless Steel

� Maximum Pressure: 150 psi

� Temperature Rating: 120°F

� Accuracy: ± 4%

22 - 4


Back Mount Pressure Gauges

MKTF-392-A AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

DimensionsGauge Size A

(in / cm)B

(in / cm)C

(in / cm)D

MNPT (in)LiquidFilled(in / cm) psi

1.50 / 3.81 0 – 160 1.61 / 4.09 0.97 / 2.46 1.57 / 3.99 1/8 No

2.50 / 6.35

0 – 1000 – 3000 – 6000 – 1000

2.50 / 6.35 1.13 / 2.87 2.22 / 5.64 1/4 Yes

PartNumber

PressureRating (psi)

Dial Size(in / cm)

GlycerinFilled Mount Clamp

StemConnection

(in)

StemMaterial Internals

CasingMaterial

204165 0 – 100 2.50 / 6.35 Yes Back Yes 1/4 MNPT Brass Brass Metal Enamel

205099 0 – 100 2.50 / 6.35 Yes Back Yes 1/4 MNPT 316L SS 316L SS 304L SS

202436 0 – 160 1.50 / 3.81 No Back No 1/8 MNPT Brass Brass Plastic

200904 0 – 300 2.50 / 6.35 Yes Back Yes 1/4 MNPT Brass Brass Metal Enamel

205100 0 – 600 2.50 / 6.35 Yes Back Yes 1/4 MNPT 316L SS 316L SS 304L SS

201360 0 – 1000 2.50 / 6.35 Yes Back Yes 1/4 MNPT 316L SS 316L SS 304L SS

BackMountGauges

AXEON Back Mount Pressure Gauges

have an easy–to–read two–tone dial that is

printed in bold UV resistant ink for ease of

legibility, even after extensive exposure to

direct sunlight. AXEON Back Mount

Pressure Gauges have been designed for

the most demanding applications and offer

durability, accuracy and high quality.

AXEON Back Mount Pressure Gauges are

offered in various scales and can come

glycerin filled or non–glycerin filled.

Features� Back Mount

� Brass, Stainless Stem or Internal

� 1.5”, 2” and 2.5” Dials

� Dry or Liquid Filled

� Temperature Rating: 0°F to 140°F

� Dual Scale in Psi and Bar

Materials of Construction� Face: Aluminum, Black and Blue Print

� Lens: Clear Acrylic

� Pointer: Aluminum, Black

� Fluid: Glycerin Filled

23 - 2


Bottom Mount Pressure Gauges

MKTF-141-B AXEON is a registered trademark of AXEON Water Technologies. 11/16 ©2016 AXEON Water Technologies

DimensionsGauge Size A

(in / cm)B

(in / cm)C

(in / cm)D

MNPT (in)LiquidFilled(in / cm) psi

2.00 / 5.08 0 – 100 2.02 / 5.13 1.13 / 2.87 1.76 / 4.47 1/4 No

2.50 / 6.35 0 – 300 2.48 / 6.29 1.13 / 2.87 2.22 / 5.64 1/4 Yes

PartNumber

PressureRating (psi)

Dial Size(in / cm)

GlycerinFilled Mount Clamp

StemConnection

(in)

StemMaterial Internals

CasingMaterial

205802 0 – 100 2.00 / 5.08 Yes Bottom No 1/4 MNPT Brass Brass Metal Enamel

200903 0 – 300 2.50 / 6.35 Yes Bottom No 1/4 MNPT Brass Brass Metal Enamel

BottomMountGauges

AXEON Bottom Mount Pressure Gauges

have an easy–to–read two–tone dial that

is printed in bold UV resistant ink for ease

of legibility, even after extensive exposure

to direct sunlight. AXEON Bottom Mount

Pressure Gauges have been designed for

the most demanding applications and offer

durability, accuracy and high quality.

AXEON Bottom Mount Pressure Gauges

are offered in various scales and can come

glycerin filled or non–glycerin filled.

Features� Bottom Mount

� Brass Stem and Internals

� 2” and 2.5” Dials

� Dry or Liquid Filled

� Temperature Rating: 0°F to 140°F

� Dual Scale in Psi and Bar

Materials of Construction� Face: Aluminum, Black and Blue Print

� Lens: Clear Acrylic

� Pointer: Aluminum, Black

� Fluid: Glycerin Filled

23 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289


212 – Series Solenoid Valve Kits

MKTF-279-D AXEON is a registered trademark of AXEON Water Technologies. 08/17 ©2017 AXEON Water Technologies

ASCO 212 – Series Solenoid Valves are high quality valves specifically designed

for water purification systems. Ideal for use in mid–size reverse osmosis systems,

ASCO 212 – Series Solenoid Valves are easy

to install, service and are available in

1/2”, 3/4” and 1” FNPT sizes.

Features� Modular Design with FasN™

Technology, the World’s First Universal Connection System

� Up to 150 psi and 180°F

� Increased Reliability: Up to 1 Million Cycles

� Low Power Coils 6.3 WAC

� Normally Closed Operation

Part Number Item Description

210459 KIT, SOLENOID, 1/2” FPT, 110V, W/DIN AND 2 METER CORD, 212, AXEON

210460 KIT, SOLENOID, 1/2” FPT, 220V, W/DIN AND 2 METER CORD, 212, AXEON

210461 KIT, SOLENOID, 1/2” FPT, 24V, W/DIN AND 2 METER CORD, 212, AXEON

210462 KIT, SOLENOID, 3/4” FPT, 120V, W/DIN AND 2 METER CORD, 212, AXEON

210463 KIT, SOLENOID, 3/4” FPT, 220V, W/DIN AND 2 METER CORD, 212, AXEON

210464 KIT, SOLENOID, 3/4” FPT, 24V, W/DIN AND 2 METER CORD, 212, AXEON

210465 KIT, SOLENOID, 1” FPT, 120V, W/DIN AND 2 METER CORD, 212, AXEON

210466 KIT, SOLENOID, 1” FPT, 220V, W/DIN AND 2 METER CORD, 212, AXEON

210467 KIT, SOLENOID, 1” FPT, 24V, W/DIN AND 2 METER CORD, 212, AXEON

Product Specifications

24 - 2


GC – Series Solenoid Valve Kits

MKTF-278-C AXEON is a registered trademark of AXEON Water Technologies. 11/17 ©2017 AXEON Water Technologies

GC – Series Solenoid Valves are debris tolerant valves that are manufactured from high strength, corrosion free, UVresistant nylon reinforced plastic. They feature a high flow design, bypass handle for valve actuation in the case of powerfailure and are a cost effective solution to regulate flow control.

Features� Water Tight Sealed Molded Coil

� 3 – Meter (118 in) Length Cord

� PVC Jacketed Extension Cable

� Normally Closed Operation

� 18/3 Wire Size

� Class H (6.5 VA draw)

PartNumber

End Connections

(in)

Flow Range(gpm / lpm)

Voltage (volts)

MinimumOperatingPressure (psi)

MaximumOperatingPressure (psi)

209420 1/2 FNPT 5 – 100 / 18.90 – 378.00 24 5 100

208920 1/2 FNPT 5 – 100 / 18.90 – 378.00 110 5 100

209419 1/2 FNPT 5 – 100 / 18.90 – 378.00 220 5 100

210193 3/4 FNPT 5 – 20 / 18.90 – 75.60 24 10 125

208786 3/4 FNPT 5 – 20 / 18.90 – 75.60 110 10 125

208787 3/4 FNPT 5 – 20 / 18.90 – 75.60 220 10 125

210194 1 FNPT 5 – 100 / 18.90 – 378.00 24 5 100

208788 1 FNPT 5 – 35 / 18.90 – 132.30 110 10 125

208789 1 FNPT 5 – 35 / 18.90 – 132.30 220 10 125

� UL Recognized, CE

� Manual Bypass Valve

24 - 3


[email protected] Tel. +31-152-610-900www.lenntech.com Fax. [email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289