Machine Brochure MÜLLER WEINGARTEN - Goedicke · Goedicke Werkzeugmaschinenhandels GmbH Heinz-Nixdorf-Straße 2 74172 Neckarsulm Germany +49 (0) 7132 – 99936 0 +49 (0) 7132 –

Goedicke Werkzeugmaschinenhandels GmbH Heinz-Nixdorf-Straße 2 74172 Neckarsulm GERMANY +49 (0) 7132 – 99936 0 www.goedicke.com : [email protected]

https://youtu.be/1_gz2WxMMO0

7-40263

Machine Brochure MÜLLER WEINGARTEN Blanking line

of 3, Stock No.: 7-40263

Blanking Line (for blank preparation) (pre-owned)

MÜLLER WEINGARTENManufacturer:

Controls: PLC

SIEMENS

S7

Revised: 2011

Stock No.: 7-40263

Press Design

frame design H-frameopenings in uprights yesopening in table yesmoving bolster yes

Press Table

clamping surface (left-right) mm2800clamping surface (front-back) mm2800height above floor level mm375

Ram

ram force to800clamping surface (left-right) mm2800clamping surface (front-back) mm2800stroke mm350number of strokes max /min50

ram (mechan. press)

ram adjustment mm350

Tool Assembly Dimensions

shut height (stroke down, adjustment up) mm1100distance between columns (H-frame) mm3100free passage between side columns (width) mm2560free passage between side columns (height) mm1500

Decoiler

design single coilsheet width max mm2000sheet width (min) mm400max. weight of coil to30max. diameter of coil mm2000min. internal diameter of coil mm610

of 3, Stock No.: 7-40263

leveler unit

sheet width max mm2000sheet width (min) mm400sheet thickness max mm2sheet thickness (min) mm0,6number of leveler rolls 13diameter of leveler rolls mm50

Feeders

feeder: type roll feedersheet width max mm2000sheet thickness max mm2feeding step max. mm4000

Electrical specifications

mains power supply kVA400mains voltage V50

BLANK CUTTING LINE FOR OUTER PANEL COMPONENTS FOR AUTOMOTIVE APPLICATIONS

Video under : https://youtu.be/rNNfncQej3k

In 2011 the complete equipment was revised: - SEW and Siemens components electronically sychronized: NEW- Drive shaft of the straightening device: NEW- Guidance of sheet metal: Optimized- Complete Electrics and electronics (S 7) : NEW - Drive Unit of the Press: * PREVIOUSLY: Grease Lubrication * NOW: Oil Circuit Lubrication

FURTHERMORE: N E W NSM destacking unit with 2 stations with length up to 4000mm (price new Euro 2.3million) and a sidewise NSM destacking unit (price new Euro 1.2million)

Description of condition

of 3, Stock No.: 7-40263

SCOPE OF DELIVERY/ COMPONENTS:- Coil carrier with separate crop shear - single sided decoiler, - max coil width 2000mm, max weight 30tons- Straightening unit with 13 straightening rolls, max blank thickness 1.8mm, max. blank width 2000mm- Loop pit - Roll feeder with roll diameter 220 mm, feed length max 4000mm- Monitoring of oilfilm thickness via scanner - Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 * with max. 55 strokes per minute * Table dimensions ( clamping surface 2800 x 2800 mm * 2 Changing tables and 350mm stroke travel

- FIRST NSM Blank destacker unit with 2 unloading stations - Max. blank dimensions 4000 x 2000mm - Conveyance speed 30 - 150 meters per minute - Packet weight max. 12000 kgs- Packet height max. 650 mm. (On this part finishing for side panel cutouts via controlled dies)

- SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks.

SET UP TIMES: approx 15 minutes for complete retooling (tool and programme change, new coil, final/ scrap cuts) approx 10 minutes for partial tool change (tool and programme change, existing coil,

PERFORMANCE: 240 to 270 tons cut blanks per day in a 3 shift operation

Technical description

Blanking Line MÜLLER WEINGARTEN 7-40263 Photos 1/9

Goedicke Werkzeugmaschinenhandels GmbH Heinz-Nixdorf-Straße 2 74172 Neckarsulm Germany +49 (0) 7132 – 99936 0 +49 (0) 7132 – 99936 0 : [email protected]



Coil-Feeder Type Müller Weingarten Typ 140 412

Coil width 400-2000 mm

Sheet metal width 0.6 - 1.8 mm

Coil-External Ø 700-2000 mm

Coil Internal Ø 610 mm

Coil Weight 30000 kg

Feed length max. 4000 mm

Coil height feed above floor 1600 mm

External croph shear for Coil preparation

Unilateral Coiler

Spreader Coil – Mandril 570-650 mm

Lateral travel 4150 mm

Crop shear:

No. of cropped pieces for 500 mm length 10

Opening height 160 mm

Straightener (chromium plated)

No. Straightening rolls 13

Ø Straightening rolls 50 mm

Coil loop bridge

Length 4500 mm

Width 3000 mm

Depth 6000 mm

Roll feed unit

Feed accuracy for up to 1000 mm ± 0.10 mm



Feed rolls 220 mm

Air tunnel top roll 45 mm

Max. feed length 4000 mm



Press with Tool Carts

Decoiler,

Straightener & Feeder

Small blank Destacker

Large Blank Destacker unit



Direction of coil

Adjustment

Stroke

Sheet metal height

Interface

Crop shear

Scrap

Floor

Coil width

Scrap tunnel

Moving bolster (total width)

2x4 Optima-

Fasteners, type DESA 20

Height of Window

SD

AU

*

Stroke

* SDAU = Stroke down Adjustment up



7-40263 Deckblatt7-40263 Datenblatt EN7-40263 Blanking Line Bilder ENGLISH

Documents

Machine Brochure MÜLLER WEINGARTEN - Goedicke · Goedicke Werkzeugmaschinenhandels GmbH Heinz-Nixdorf-Straße 2 74172 Neckarsulm Germany +49 (0) 7132 – 99936 0 +49 (0) 7132 –