Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
MV Marketing und Vertriebs-GmbH & Co. KG
Professionelle Karosserie-Spezialwerkzeuge
Siederstr. 50 D-78054 Villingen-Schwenningen Tel. +49 (0) 7720 8317 0 E-mail [email protected]
sb
-06
/20
14
MIG/MAG IM 240-i welder with inverter technology
A very straight forward and simple to use machine with
simple settings because of the tough construction - it will tolerate very hard impacts.
Technical Data
•MIG/MAG welding (MIG-flux-cored welding wire brazing)
•4 roller drive with trim adjustment
•Use with D300 wire spool (max. 17 kg)
•Display with hold function for welding current and tension.
•Dynamic pulse adjustment to remove the „ball“ at the end of the wire
•Extremely good welding results even on very thin sheet metal. There are no problems with steelwelding on panels as thin as 0,6mm (0,023 in)
Content of deliveryWelder with rollersTorch MB 15, 3mEarth cable 4 mItem No 341290
Mains connection 220/240V - 50/60 Hz
Load capacity (delayed) 16 A
Current adjustment range 20 - 200A
Voltage adustment range 10 - 35V
Welding range/steps continuous
No load output voltage Uo @40°C 20%/200A/24V
Load capacity 60% ED@40°C 140A / 21V
Load capacity 100% ED@40°C 120A / 20V
Weight 35 kg
Dimensions (HxBxL) 890x365x600 mm
single phase
220/240V