33
NET-TV Bedienungsanleitung Operating Instructions Netzwerk-Tuner zum TV-Empfang auf jedem Gerät Network tuner to the TV receipt on every device Premiumsponsor der Lilien

NET-TV...wird erheblich vereinfacht Weitere Informationen finden Sie unter www satip info 2.2 PEAKnx Net Server Beim PEAKnx NET-TV handelt es sich um einen Server Das Gerät streamt

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

NET-TVBedienungsanleitung Operating Instructions

Netzwerk-Tuner zum TV-Empfang auf jedem Gerät Network tuner to the TV receipt on every device

Premiumsponsor der Lilien

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com2 3

Inhaltsverzeichnis

Berücksichtigte Produkte � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 51� Sicherheitshinweise � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6

1�1 Allgemeine Hinweise � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 61�2 Betriebssicherheit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 61�3 Aufstellungsort � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 61�4 Elektromagnetische Verträglichkeit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 71�5 Reinigung� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 71�6 Datensicherung � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 71�7 Support � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7

2� PEAKnx NET-TV im Überblick � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 72�1 SAT>IP Protokoll � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 82�2 PEAKnx Net Server � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 82�3 SAT>IP Clients � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 82�4 Mindestanforderungen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8

3� Allgemeines � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 93�1 Lieferumfang � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 93�2 Technische Daten � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 93�3 Allgemein � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 93�4 Beschreibung � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10

4� Inbetriebnahme � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 114�1 Netzwerkumgebung� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 114�2 Eingangssignal � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

4�2�1 DVB-S2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 124�2�2 DVB-C/C2 und DVB-T/T2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 124�2�3 Common Interface � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13

5� PEAKnx NET-TV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 135�1 Erster Start � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 135�2 Anschluss � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 135�3 Inbetriebnahme � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 145�4 Konfigurationsmenü � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14

5�4�1 Zugriff unter Windows 7/8/10 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 155�4�2 Statusinformationen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 155�4�3 System Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 185�4�4 LNB Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 195�4�5 SCR Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 205�4�6 UPnP Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21

5�4�7 CI Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 215�4�8 Multicast Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 215�4�9 Channel Lists � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 255�4�10 Update � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25

5�5 Zugriff per Client � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 265�5�1 Zugriff per App � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 265�5�2 Zugriff per Windows � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 285�5�3 Zugriff per Linux � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 285�5�4 Zugriff per Hardware Client � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 285�5�5 Zugriff per BrowserTV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 285�5�6 Zugriff per M3U-Listen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29

5�6 Betriebszustände � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 295�6�1 Regulärer Betrieb � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 295�6�2 Kaskadierter Betrieb � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 295�6�3 Standby-Betrieb � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29

6 FAQ zum PEAKnx NET-TV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30Über PEAKnx � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 31 NET-TV Operating Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �32-63

Seite Seite

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com4 5

Berücksichtigte Produkte

Das Titelbild zeigt das Produkt PEAKnx NET-TV SAT 4 Tuner� Die anderen Produkt-ausführungen sind in der Bauform identisch, unterscheiden sich jedoch in der Bestückung�

In diesem Dokument erwähnte Produktnamen können Marken oder eingetragene Marken der jeweiligen Eigentümer sein� Diese sind nicht ausdrücklich durch „™“ und „®“ gekennzeichnet�

Copyright © DOGAWIST Investment GmbH

PEAKnxOtto-Röhm-Straße 6964293 DarmstadtDeutschland

www�peaknx�com info@peaknx�com

Dokumentversion 1�0�0 (27� Juli 2016)

Produktbezeichnung Ausführung

PEAKnx NET-TV SAT 2 Tuner 2 Tuner für SAT

PEAKnx NET-TV SAT 4 Tuner 4 Tuner für SAT

PEAKnx NET-TV Kabel 2 Tuner 2 Tuner für Kabel

PEAKnx NET-TV Kabel 4 Tuner 4 Tuner für Kabel

Abbildungsverzeichnis

Abbildung 1: AST>IP � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7Abbildung 2: Vorderansicht des PEAKnx NET-TV Gehäuses � � � � � � � � � � � � � � � � � � � � � � 8Abbildung 3: Vorderansicht des PEAKnx NET-TV mit Beschriftung � � � � � � � � � � � � � � � 10Abbildung 4: Rückansicht des Gehäuses (SAT 4 Tuner) � � � � � � � � � � � � � � � � � � � � � � � � � 10Abbildung 5: Seitenansicht des NET-TV Gehäuses � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11Abbildung 6: Das PEAKnx NET-TV unter Netzwerk� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15Abbildung 7: Beispielhafte IP-Adresse � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15Abbildung 8: Startseite der Konfigurationsoberfläche � � � � � � � � � � � � � � � � � � � � � � � � � 16Abbildung 9: Tuner-Status � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17Abbildung 10: Stream-Status � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17Abbildung 11: Systemeinstellungen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18Abbildung 12: LNB Einstellungen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19Abbildung 13: Manuelle LNB Einstellungen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20Abbildung 14: SCR Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20Abbildung 15: Static Multicast Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23Abbildung 16: Static Mulitcast Setup mit Samples Astra 19�2 � � � � � � � � � � � � � � � � � � � 24Abbildung 17: Stream 10 wird nur über die Ports 3,4 und 5 permanent gestreamt� 24Abbildung 18: Channel Lists � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25Abbildung 19: Update � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25Abbildung 20: Elgato SAT>IP App (Bild: Elgato�com) � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27Abbildung 21: Elgato Satellite Setup (Bild: Elgato�com) � � � � � � � � � � � � � � � � � � � � � � � � � 27Abbildung 22: Browser TV mit dem VLC Media Player Add-on möglich � � � � � � � � � � � 28

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com6 7

1. Sicherheitshinweise

1.1 Allgemeine HinweiseBitte lesen und befolgen Sie diese Sicherheitshinweise� So sorgen Sie für einenzuverlässigen Betrieb und eine lange Lebensdauer Ihres PEAKnx NET-TVs�Bewahren Sie diese Bedienungsanleitung in greifbarer Nähe des PEAKnx NET-TVsauf, um jederzeit nachschlagen zu können� Das PEAKnx NET-TV wird stetigweiterentwickelt, eine aktuelle Version dieses Dokuments können Sie aufunserer Webseite herunterladen�

1.2 BetriebssicherheitDer Anschluss des PEAKnx NET-TVs sollte von einem qualifizierten Technikeroder einer Person mit entsprechenden Kenntnissen in der Netzwerktechnikerfolgen�

Bitte wenden Sie sich an Ihren Lieferanten, wenn Sie folgende technischeProbleme mit dem PEAKnx NET-TV haben:

■ Das Gerät ist mit Flüssigkeit in Berührung gekommen�

■ Das Gerät funktioniert nicht ordnungsgemäß�

Sollte eine Reparatur notwendig sein, wenden Sie sich bitte an uns�

1.3 AufstellungsortUm einen elektrischen Kurzschluss zu vermeiden, sollten Sie nach dem Transport des PEAKnx NET-TVs mit der Inbetriebnahme solange warten, bis es die Umgebungstem-peratur angenommen hat�Große Temperatur- oder Feuchtigkeitsschwankungen können durch Kondensation Feuchtigkeitsbildung verursachen, die wiederum zum Kurzschluss führen kann�Schützen Sie das Gerät vor Feuchtigkeit, Staub, Hitze und direkter Sonneneinstrahlung�Stellen Sie das Gerät auf eine ebene, stabile und vibrationsfreie Unterlage, um Unfälle zu vermeiden�Blitzschlagschäden (Überspannungsschäden) lassen sich im Fall eines Gewittersnur vermeiden, wenn alle Kabel zu externen Geräten und Netzen,

Achtung!Lassen Sie Kinder keinesfalls unbeaufsichtigt an elektrischen Geräten spielen, sie können Gefahrenquellen noch nicht erkennen�

inkl� dem Telefonnetz abgezogen werden� Die meisten Schäden entstehen durch Blit-zeinwirkung über das Antennen/SAT Kabel, gefolgt von Schäden über das Stromnetz�

1.4 Elektromagnetische VerträglichkeitDie Richtlinien für elektromagnetische Verträglichkeit (EMV) müssen beim Anschluss des PEAKnx NET-TVs eingehalten werden�Um Funktionsstörungen und Datenverluste zu vermeiden, sollten Sie einen Min-destabstand von einem Meter zu hochfrequenten und magnetischen Störquellen (TV-Gerät, Mobiltelefon, Lautsprecherboxen usw�) einhalten�

1.5 ReinigungDas PEAKnx NET-TV nur mit einem weichen, trockenen Tuch abwischen�Ziehen Sie vor der Reinigung den Netzstecker und die Verbindungskabel�

1.6 DatensicherungErstellen Sie vor der Installation von Fremdsoftware auf Ihrem PC eineDatensicherung Ihrer Daten auf einem externen Speichermedium (CD, DVD,USB-Stick, externe Festplatte usw�)�Schadenersatzansprüche für Datenverlust und die dadurch entstehendenFolgeschäden können nicht geltend gemacht werden�

1.7 SupportSupport und weitere Anfragen per E-Mail:info@peaknx�comAktuelle Information zum PEAKnx NET-TV:www�peaknx�com

2. PEAKnx NET-TV im Überblick

Abbildung 1: AST>IP

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com8 9

2.1 SAT>IP ProtokollSAT>IP ist ein neuer Standard für den Empfang und die Verteilung von Satellitenfern-sehen, der federführend vom Unternehmen SES S�A� /Luxembourg und der Astra Deutschland GmbH/Unterföhring entwickelt worden ist�SAT>IP konvertiert Fernsehsignale vom Satelliten (DVB-S und DVB-S2) in IP-Signale für die Nutzung auf Endgeräten im jeweiligen Netzwerk� So können alle IP-basie-renden Endgeräte wie Tablets, PCs, Laptops, Smartphones, Connected TVs, Spiele-konsolen und Media Player mit TV-Programmen über das lokale Netzwerk versorgt werden� Das ermöglicht Satellitenfernsehen in bester Qualität auch auf Geräten, die keinen integrierten Satellitenempfänger haben�Satellitensignale können dabei über jede IP-Infrastruktur transportiert werden, z�B� auch über WLAN� Auch die Verteilung des Satellitensignals auf mehrere Fernsehgeräte wird erheblich vereinfacht� Weitere Informationen finden Sie unter www�satip�info�

2.2 PEAKnx Net ServerBeim PEAKnx NET-TV handelt es sich um einen Server� Das Gerät streamt dabei Live-TV auf IP-TV-fähige Endgeräte im lokalen Netzwerk� Aus zahlreichen Endgeräten wird so ein Full-HD-Fernseher für Satelliten- und Kabelfernsehen�Dabei werden die frei empfangbaren Sender in Full HD per LAN und/oder WLAN im lokalen Netzwerk verteilt� Die bis zu 4 Streams – je nach Modell - können dabei zeit-gleich an stationären und mobilen Endgeräten genutzt werden�

2.3 SAT>IP ClientsFür die Nutzung auf einem Endge-rät ist eine zusätzliche Clientsoft-ware notwendig, sofern sie nicht bereits vorinstalliert ist� Die zu nut-zende Clientsoftware ist dabei für die Betriebssysteme iOS (iPhone, iPad, iPod), Android, MAC OS sowie Windows bereits von verschiede-nen Herstellern am Markt verfügbar (Smart TV Fernseher, Windows Phone, Windows RT und Kindle Fire HD in Vorbereitung)� Eine Liste der verfügbaren SAT>IP Client Software finden Sie auf der Website: http://www�satip�info�

Abbildung 2: Vorderansicht des PEAKnx NET-TV Gehäuses

2.4 MindestanforderungenUm HDTV-Programme betrachten zu können, benötigen Sie entsprechend leistungs-fähige SAT>IP Clients oder UPnP-fähige Clients� Hochauflösende Inhalte (HDTV) benötigen ein leistungsfähiges Netzwerk und leistungsfähige Clients, um die Inhalte störungsfrei darstellen zu können� Eine störungsfreie HD-Darstellung ist nur möglich, wenn ein entsprechendes Netzwerk und ein leistungsfähiger Client vorhanden sind� SAT>IP Clients können zusätzliche Bezugskosten beinhalten, prüfen Sie dies jeweils individuell�Um das Konfigurationsmenü des PEAKnx NET-TVs aufrufen zu können, benötigen Sie einen Internet Browser Ihrer Wahl� Die Netzwerkgeschwindigkeit sollte 1 Gigabit (Empfehlung) für LAN-Umgebungen betragen, die Umgebungen nach dem n-WLAN-Standard (300 MBit) ausgestattet sein�

3. Allgemeines

3.1 Lieferumfang ■ PEAKnx NET-TV Netzwerktuner (mit 5 Port Switch und 2-4 Kabel/SAT Tuner)

■ integriertes Twin CI Interface

■ externes Netzteil

■ Wandhalterung

■ USB-Stick mit Software QCTV

■ Handbuch im PDF-Format

Hinweis: Das Handbuch zur Software QCTV finden Sie auf dem mitgelieferten USB-Stick unter dem Pfad QCTV/Install_QCTV.pdf .

3.2 Technische Daten ■ SAT>IP bis zu 4 Teilnehmer (erweiterbar durch Kaskadierung)

■ SAT>IP Protokoll Version 1�2�2 (updatefähig)

■ Updates per Web-Konfigurator (über LAN)

■ Singlecast/Multicast via UDP/RTP

■ 5 Port managed GigaBit-Switch (5x 10/100/100 Ethernet)

■ Protokolle IPv4 und IPv6, Multicast, IP Filterung, Vollduplex

■ Twin CI Unterstützung

3.3 Allgemein ■ Stromversorgung über externes 12V-Netzteil (220 V, 50-60 Hz)

■ Betrieb max: 12 Watt (4 Tuner) ohne LNB Strom

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com10 11

■ Temperaturbereich: -10 bis 50 Grad

■ Abmessungen: 45 x 127 x 127 (BxHxT in mm)

■ Gewicht: 500 Gramm

■ Hergestellt in Deutschland

3.4 Beschreibung

1� Ein/Aus - Schalter2. Status LED 13. Status LED 24. Common Interface / CI Schacht

1. 5 LAN-Anschlüsse2. TV-Tuner 1 bis 4 (je nach Modell)3. Resetknopf4. Netzanschluss für externes Netzteil

Abbildung 4: Rückansicht des Gehäuses (SAT 4 Tuner)

1. Lüftungsschlitze

4. Inbetriebnahme

4.1 NetzwerkumgebungDas PEAKnx NET-TV kann in Netzwerkumgebungen per LAN, WLAN und Pow-erLan betrieben werden� Wir empfehlen für einen störungsfreien Betrieb folgende Verbindungsge-schwindigkeiten:

■ LAN: 100 Mbit/s Netzwerk, empfohlen 1000 Mbit/s (GigaBit) Umgebung

■ WLAN: 54 Mbit/s Netzwerk, empfohlen 300 Mbit/s Netzwerk Umgebung

■ PowerLan: 54 Mbit/s Netzwerk, empfohlen 300 Mbit/s Netzwerk Umgebung Die 5 Ports des integrierten Gigabit Switch sollten bevorzugt für die Endgerätemit SAT>IP Client genutzt werden, da diese bereits eine optimale Quality-of-Service-Konfiguration (QoS) für den Betrieb von SAT>IP ab Werk besitzen�

4.2 EingangssignalEin Vorteil des PEAKnx NET-TVs ist die modulare Bauweise und Erweiterungsfähigkeit um weitere Tunermodule� Als Tuner kommen, je nach Modelltyp, die DuoFlex S2 (DVB-S/S2) und DuoFlex C/C2/T/T2 (DVB-C / DVB-C2 / DVB-T / DVBT2) Serie von PEAKnx zum Einsatz�Die folgenden Kapitel beschreiben die technischen Spezifikationen der verschiede-nen Tunermodule und des Common Interface�

Abbildung 5: Seitenansicht des NET-TV Gehäuses

Abbildung 3: Vorderansicht des PEAKnx NET-TV mit Beschriftung

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com12 13

4.2.1 DVB-S2

4.2.2 DVB-C/C2 und DVB-T/T2

Satelliten Merkmale (DuoFlex S2): Twin Tuner Unicable konform:

Symbol Rate:Bis zu 45 Msps DVB-S2

SCR / Cenelec EN 50494(Unicable®)

LNB Power:+14 V DC oder +18 V DC oderohne Stromversorgung (bis zu 500mA)

Sicherheit:Produziert und Designed nacheuropäischen Standards, DIN ENISO 9001:2000

L-Band:950 Mhz bis 2150 MHzDVB FEC: (Auto Spectral Detection)

Umweltstandards:RoHS Konformität,WEEE DE 99353762

Modulation QPSK/8PASK

Volle DiSeqC 2�X Unterstützung

Standard-Anschlüsse: 20 pol� Stecker für Flachbandkabel

L-Band F-Buchsen (IEC 60169-24;unterstützt Stromversorgung zum LNB)

Terrestrische Merkmale (DuoFlexC/C2/T/T2):

Twin Tuner DVB-T/T2 Merkmale: Frequenzbereich:

Twin Tuner DVB-C Merkmale: 49-861MHz, 2k&8k OFDM

Frequenzbereich: 51 bis 858 MHz Alle Modulationsarten nach DVB-T und DVB-T2 Spezifikation

Alle Modulations- und Codeartennach DVB-C Spezifikation

Empfindlichkeit: -82,6dBm bei 16-QAM&3/4

Symbolraten von 0,87 bis 6,9MBaud

Sicherheit: Produziert und Designed nach europäischen Standards, DIN EN ISO 9001:2000

Empfindlichkeit: 47 dbμV(64QAM), 47 dbμV (256QAM)

Umweltstandards: RoHS Konformität, WEEE DE 99353762

Standard Anschlüsse: IEC Buchse (Input), IEC Stecker (Output), 20 pol� Stecker für Flachbandkabel

4.2.3 Common Interface

5. PEAKnx NET-TV

5.1 Erster StartPacken Sie Ihr PEAKnx NET-TV aus und prüfen die Vollzähligkeit allerKomponenten� Bei Fragen wenden Sie sich umgehend an unseren Support�

5.2 AnschlussEntfernen Sie von dem PEAKnx NET-TV zuerst alle Schutzfolien und Verpackungs-hilfen� Stellen Sie das Gerät auf eine waagerechte und schmutzfreie Oberfläche� Eine Montage mit dem beigelegten Adapter für eine Wandmontage sollte erst nach Abschluss der Einrichtung erfolgen�Verbinden Sie eine LAN-Buchse des PEAKnx NET-TVs mit einem Netzwerkkabel,welches mit Ihrem Heimnetzwerk (Router/Switch/Access Point) verbunden ist�Damit das PEAKnx NET-TV automatisch eine IP-Adresse erhält, muss ein DHCP Serverim Netzwerk aktiv sein (z�B� Standard bei handelsüblichen Routern)� Das PEAKnx NET-TV muss sich in der gleichen Netzwerkumgebung wie die Endgeräte befinden (gleicher IP-Adressbereich)� Verbinden Sie das PEAKnx NET-TV mit dem Kabel Ihrer vorhandenen Empfangsanlage� Für die Empfangsart DVB-S/S2 verbinden Sie die Ausgänge des LNBs/Multischalters über geeignete Antennenkabel mit jeweils einem PEAKnx Net-TV Tuner� Auch bei Nutzung von Unicable LNB/Multiswitch erfolgt die Verkabelung der Ausgänge über ein geeignetes Antennenkabel zu dem jeweiligen PEAKnx Net-TV Tuner� Nutzen Sie ggf� konforme Unicable Satverteiler�

Hinweis: Für die Empfangsart DVB-C/C2 und DVB-T/T2 wird nur ein Kabel je Twin-Tuner benötigt.

2 Tuner Version des PEAKnx NET-TVs:Verbinden Sie den Ausgang einer Antennendose oder einer DVB-T/T2 Antenneüber ein geeignetes Antennenkabel mit dem Eingang des PEAKnx NET-TVs Twin-Tu-

Standard Anschlüsse: Sicherheit:

20 pol� Stecker für Flachbandkabel Produziert und Designed nach europäi-schen Standards, DIN EN ISO 9001:2000

Stromversorgung über 4-poligenFloppy-Standard-Stecker

Umweltstandards: RoHS Konformität, WEEE DE 99353762

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com14 15

ner Karte (IEC Buchse)� Der Ausgang der Twin-Tuner Karte (IEC Stecker) kann zur Versorgung weiterer Geräte (z�B� TV oder PEAKnx Produkte) genutzt werden, wenn das PEAKnx NET-TV in Betrieb ist� Der eingebaute Verstärker sorgt dafür, dass ein Signal ohne Verluste weitergegeben wird�

4 Tuner Version des PEAKnx NET-TVs:Das erste Twin-Tuner-Paar verkabeln Sie, wie es bei der 2-Tuner-Version beschrieben ist� Versorgen Sie das zweite Twin-Tuner-Paar entweder mit einem getrennten Signal-eingang, z�B� wenn Sie den ersten Twin-Tuner für DVB-C/C2 nutzen möchten und den zweiten Twin-Tuner für DVB-T/T2�Oder nutzen Sie ein kurzes Antennenkabel (optionales Zubehör), um den Ausgang (IEC Stecker) des ersten Twin-Tuners mit dem Eingang (IEC Buchse) des zweiten Twin-Tuners zu verbinden, wenn die Empfangsart an beiden Twin-Tuner-Paaren gleich ist� Verbinden Sie als letztes das PEAKnx NET-TV mit dem Stromnetz per mitgelieferten Steckernetzteil� Nutzen Sie nur fachgerecht installierte Netzsteckdosen 220-240 V~ / 50-60 Hz�

5.3 InbetriebnahmeSchalten Sie das PEAKnx NET-TV mit dem Netzschalter an der Frontseite ein� Das Gerät meldet sich automatisch im Netzwerk und bezieht eine freie IP-Adresse aus dem DHCP-Pool des DHCP Servers (normalerweise ist dieser ein Funktionsbestandteil des Routers)� Die LED 1 an der Frontseite zeigt Ihnen den Betriebszustand an�

Das PEAKnx NET-TV ist nun in seiner Auslieferungskonfiguration betriebsbereit Zum Ausschalten des PEAKnx NET-TVs halten Sie den Ein/Aus – Schalter mindes-tens 10 Sekunden gedrückt�

5.4 KonfigurationsmenüDie folgenden Ausführungen zur Konfiguration des PEAKnx NET-TVs basieren auf der Firmware 1�0�57 (Stand: Q2/2016)� Eine aktuelle Version des Handbuches finden Sie jederzeit auf unserer Webseite unter www�peaknx�com�

Zustand Beschreibung

Aus PEAKnx NET-TV ist nicht in Betrieb�

Blinkt PEAKnx NET-TV startet�

An PEAKnx NET-TV ist betriebsbereit�

Die Konfiguration des PEAKnx NET-TVs erfolgt durch ein Web-Interface� Das Gerät meldet sich im Netzwerk mit dem Namen PEAKnx NET-TV� Der Aufruf der Konfigura-tionsoberfläche kann auf unterschiedlichen Wegen erfolgen�

5.4.1 Zugriff unter Windows 7/8/10Öffnen Sie auf dem Desktop Computer und wählen Sie dort den Punkt Netzwerk�Das PEAKnx NET-TV wird unter dem Namen PEAKnx NET-TV angezeigt�

Mit einem Doppelklick auf das Gerät wird die Konfigurationsoberfläche geöffnet�Die Konfigurationsoberfläche ist auch über einen Browser durch Eingabe der IP-Adresse aufrufbar� Wenn Sie die IP-Adresse des Gerätes nicht kennen, gehen Sie wie folgt vor: Klicken Sie mit der rechten Maustaste auf das PEAKnx NET-TV unter Netzwerk oder Netzwerkumgebung und wählen den Menüpunkt Gerätewebseite anzeigen aus� Im Standardwebbrowser Ihres PCs erscheint dann die Konfigurationswebseite� Die aktuelle IP-Adresse des Gerätes finden Sie in der Adresszeile des Browsers�

5.4.2 StatusinformationenBeim Aufruf der Konfigurationsoberfläche erhalten Sie die Information der Firmwa-reversion Ihres PEAKnx NET-TVs� Unter dem Menüpunkt Home erhalten Sie weitere Informationen zu Ihrem Gerät�

Abbildung 6: Das PEAKnx NET-TV unter Netzwerk

Abbildung 7: Beispielhafte IP-Adresse

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com16 17

Der Menüpunkt Tuner Status enthält Detailinformationen zu den maximal 8 Tunern des PEAKnx NET-TVs� Neben der aktuellen Nutzungsinformation der Tuner sind auch je Tuner erweiterte Empfangsartinformationen aufgeführt (Strength, Quality)� Unter dem Menüpunkt Stream Status erhalten Sie zusätzliche Informationen zur Nutzung der Tuner� So kann neben erweiterten Streaming-Informationen auch der Client im Bezug zum genutzten Tuner erkannt werden�

Begriff Beschreibung

FW Date Datum der installierten Firmwareversion

Linux Versionsnummer des installierten Linuxkernels

SAT>IP Server Versionsnummer des PEAKnx Net-TV SAT>IP Servers

FPGA Versionsnummer des FPGA

Boot ID Wird zur Identifizierung mehrerer PEAKnx Net-TVs im Netzwerk benötigt�

Device ID Wird zur Identifizierung mehrerer SAT>IP Server benötigt�

Tuner 1-4 Anzahl der erkannten Tuner und deren Empfangsart(en)

Abbildung 8: Startseite der Konfigurationsoberfläche

Abbildung 9: Tuner-Status

Abbildung 10: Stream-Status

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com18 19

5.4.3 System Settings

Im Menüpunkt Layer 2 Quality of Service (QoS) kann die Priorisierung der SAT>IPStreams in Ihrer Netzwerkumgebung eingestellt werden� Sie benötigen dazu Hard-ware (z�B� Router, Switch etc�), die diese Funktion (QoS) unterstützen� Zur Konfigura-tion nutzen Sie bitte die Handbücher Ihrer Netzwerkhardware�

Sollten Sie das PEAKnx NET-TV nach einer Aktivierung des QoS nicht mehr wie gewohnt nutzen können, deaktivieren Sie diesen Menüpunkt wieder�

Hinweis: Die eingebauten Netzwerkports des PEAKnx NET-TVs haben bereits ein internes Layer 2 Quality of Service (QoS) fest eingestellt. Nutzen Sie für Ihre Netzwerk-hardware vorrangig diese Ports für optimale Ergebnisse. Das fest eingestellte interne QoS-Feature hat keinen Einfluss auf angeschlossene Netzwerkkomponenten, die diese Features nicht unterstützen.

Achtung!Änderungen in den System Settings sollten nur von erfahrenen Nutzern getätigt werden�

Abbildung 11: Systemeinstellungen

Für einen Zugang zum PEAKnx NET-TV per Telnet aktivieren Sie die entsprechende Option im Menü�

5.4.4 LNB SettingsDiesen Menüpunkt sollten Sie nur auf Anweisung des PEAKnx Supports abändern, da durch Veränderungen in diesem Menüpunkt der SAT Empfang ggf� gestört werden kann�

Nach der Aktivierung der manuellen LNB Konfiguration können Sie direkt eine Anpassung an Ihrer Umgebung vornehmen� Dabei können Sie wählen, für welche Tuner und/oder Satelliten (Source) Ihre Anpassung gezielt gelten soll� Ohne Angabe in diesen Feldern, gelten die Einstellungen für alle verfügbaren Tuner� Sie können mit den LOF-Angaben eine Optimierung der Offsetwerte an Ihre Umgebung herbei-führen� Nutzen Sie dazu das Handbuch Ihres LNBs� Ihre abgeschlossenen Konfigu-rationen sind dann im unteren Bereich aufgeführt� Sie sind durch den Clear-Button wieder entfernbar�

Achtung!Diesen Zugang zum PEAKnx NET-TV sollten nur Linux-Profis nutzen� Für Schäden durch diesen Eingriff übernehmen wir keine Garantie�

Abbildung 12: LNB Einstellungen

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com20 21

5.4.5 SCR SettingsSCR ist nur bei der Nutzung mit einem DVB-S/S2 Modell verfügbar�

Für die Unterstützung der SCR Einstellungen im Menü SCR Settings benötigen Sie SCR-taugliche Hardware (SCR LNB und/oder SCR Multiswitch)� Für die Installation die-ser Zusatzkomponenten nutzen Sie bitte die Handbücher des jeweiligen Herstellers�

Abbildung 13: Manuelle LNB Einstellungen

Abbildung 14: SCR Settings

Durch die Aktivierung des Menüpunktes Enable SCR (EN50494 / EN50607) können Sie die Zuordnung der SCR Channel zu den jeweiligen Tunern vornehmen� Eine doppelte Nutzung von SCR-Kanälen ist nicht möglich� Eine Abstimmung mit weiteren Nutzern bzw� Endgerätekonfigurationen mit SCR ist zwingend erforderlich�

5.4.6 UPnP SettingsMit einem Firmwareupdate wird diese Kategorie später verfügbar sein, eine aktu-elle Version des Handbuches finden Sie jederzeit auf unserer Webseite unter www�peaknx�com�

5.4.7 CI SettingsDas CI in Ihrem PEAKnx NET-TV kann mit jedem Programm (Client) genutzt werden, welches über M3U-Listen RTSP-Links aufrufen kann� In den RTSP-Links wird festgelegt, ob ein Sender über ein vorhandenes CI entschlüsselt werden soll� Pro-gramme, die mit M3U-Listen umgehen können, sind z�B� auf Ihrem PC oder MAC der VLC® Player� Auf Ihrem Mobile Device (Smartphone oder Tablet) zum Beispiel der GoodPlayer®� Natürlich ist auch die Nutzung des Browser TVs im Webinterface des PEAKnx NET-TVs möglich� Nach dem SAT>IP Standard ist derzeit der DVBViewer GE für die Nutzung des CIs geeignet�

5.4.8 Multicast SetupMulticast erlaubt das Streamen eines Transponders oder einzelner Kanäle eines Transponders in ein Netzwerk� Vorteil dabei ist, dass über einen Tuner gleich meh-rere TV Kanäle gestreamt werden können, die von beliebig vielen Netzwerkteil-nehmern angeschaut werden können� Jeder Tuner kann damit einem anderen Transponder zugeteilt werden� Es gibt zwei Verfahren, die dabei angewendet werden können�

Beim permanenten Streamen eines TV Kanals oder Transponders wird das Signal dauerhaft gesendet� Jeder Client kann sich jederzeit auf den Stream aufschalten� Das bedeutet aber eine permanente Netzwerklast, egal ob der Stream benötigt wird oder nicht�

IGMP V3 erlaubt, dass ein Stream angefordert werden kann und dann auch aktiv wird� Der erste Client aktiviert den Stream (IGMP join)� Der nächsteClient kann sich dann einfach auf dem Stream aufschalten� Der letzte Client, derden Stream verlässt, deaktiviert den Stream (IGMP leave)� Somit wird dasNetzwerk nur mit den Streams belastet, die auch benötigt werden�

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com22 23

Grundsätzlich müssen die Netzwerkkomponenten IGMP V3 unterstützen� Einige Switches/WLAN-Router lassen IGMP V3 transparent durch, auf allen Ports, andere Switches ignorieren das Protokoll und lassen es erst gar nicht durch� Streamt man permanent in ein WLAN-Netzwerk, dessen Komponenten kein IGMP V3 unterstützen und so die Multicast-Pakete durchlassen, dann ist ein WLAN-Netz-werk sehr schnell überlastet�

Beispielsweise unterstützt eine AVM Fritzbox 7390 IGMP V3� Diese lässt Multicast standardmäßig ins LAN-Netzwerk passieren, blockiert es jedoch für WLAN-Teil-nehmer� Ein „normales“ Arbeiten bleibt so möglich� Somit ist es wichtig, dass das PEAKnx NET-TV die WLAN-Netze von den anderen Netzen trennen kann� Beim permanenten Streaming kann man optional einstellen, über welche der 5 Ports des eingebauten Switches der Stream ausgegeben wird�

Das PEAKnx NET-TV unterstützt insgesamt 12 gleichzeitige Streams� Dabei ist zubeachten: Entweder streamt man einen kompletten Transponder (verbraucht einen Stream) oder man segmentiert, dass nur bestimmte Kanäle eines Transpon-ders gestreamt werden� Hierbei verbraucht jeder TV Kanal einen Stream�

Einige Empfangsprogramme kommen mit dem komplett gestreamten Transponder nicht zurecht� Dabei muss die Software den Transponder zerlegen und die PID s des gewünschten Programms raussuchen, um es dann wiedergeben zu können� Zudem wird alles von dem Transponder mitgestreamt (Fülldaten, Radiokanäle etc�)� Hier kommen bei 8 Transpondern sehr schnell 500 MBit/s an Daten zusammen, was ein Netzwerk permanent beschäftigen würde�

Es gibt zwei weitere Features: Zum einem ist es möglich, wenn nicht alle Streams für Multicast konfiguriert sind, per Singlecast (z�B� aus dem WLAN) auf den PEAKnx NET-TV zuzugreifen� Das Gerät setzt dabei einen Multicast-TV-Kanal auf einen Sing-lecast-Teilnehmer um�

Eine zweite Möglichkeit ist, das PEAKnx NET-TV im Mischbetrieb (Multicast und Singlecast) zu betreiben� Also zum Beispiel per Multicast werden ein oder zwei Tuner belegt und die anderen Tuner laufen im Singlecast-Modus�

Hinweis: Natürlich ist es bei 8 Tunern möglich, zwischen Multicast und freien Singlecast eine beliebige Aufteilung vorzunehmen.

Zu den Konfigurationsmöglichkeiten des Multicast Setups:Im Konfigurationsmenü des PEAKnx NET-TVs unter Multicast Setup sind verschiedene Beispiel-Konfigurationen bereits enthalten� Hier einmal Astra 19.2 ausgewählt�

Über den Download-Button kann die Sample-Datei heruntergeladen werden�Hier sieht man, wie die Datei aufgebaut ist� Per Select & Enable kann die Sample-Datei ausgewählt und aktiviert werden�

Über den Punkt Browser kann eine selbst erstellte Datei in das PEAKnx NET-TV gela-den und per Upload & Enable automatisch aktiviert werden� Per Disable deaktiviert man den Multicast wieder�

Konfigurationsbeispiel: Wenn die Sample-Datei aktiviert wird, werden 11 Streams „normal“ belegt und ein Stream 10 (Kika) wird nur über die Ports 3, 4 und 5 perma-nent gestreamt�

Abbildung 15: Static Multicast Setup

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com24 25

Unter dem Menüpunkt Stream Status sieht man nun, dass ein permanenter Datenstrom geschickt wird� Ob dies von einem User/Programm anschaut/genutzt wird oder nicht, ist dabei egal� Die anderen Kanäle werden per IGMP V3 erst dann aktiv, wenn Sie angefordert werden�

Mit dem Menü-punkt M3U List kann per Down-load eine M3U-Liste der aktiven Konfiguration heruntergeladen werden� Diese kann dann z�B� im VLC/MediaPor-tal/KODI/usw� genutzt werden�Die Multicast-IP-Adresse wird von dem PEAKnx NET-TV selbst erstellt und ist nicht individuell änderbar� Sie setzt sich wie folgt zusammen:239�<DeviceID>�2�<StreamID> (im Beispiel: 239�6�2�10)

Abbildung 16: Static Mulitcast Setup mit Samples Astra 19�2

Abbildung 17: Stream 10 wird nur über die Ports 3, 4 und 5 permanent gestreamt�

Hinweis: Bei Fragen zur Multicast-Konfiguration nutzen Sie gern unseren Support.

5.4.9 Channel ListsDas PEAKnx NET-TV bringt einige Channel Lists verschiedener Anbieter ab Werk mit (automatische Aktualisierung per Firmwareupdate)� Diese werden unter System Channel Database zusammengefasst� Das Gerät kann auch mit persönli-chen Channel Lists umgehen�

Hinweis: Mit dem Delete-Button kann jederzeit die ab Werk mitgelieferte System Channel Database wieder aktiviert werden.

5.4.10 UpdateIm Menüpunkt Update können Sie Ihr PEAKnx NET-TV sehr einfach auf den aktuellen Firmware-Stand aktualisieren�

Abbildung 18: Channel Lists

Abbildung 19: Update

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com26 27

Zur Nutzung der Funktionalität muss für das PEAKnx NET-TV eine aktive Internetverbindung ermöglicht werden� Durch Anklicken des Check-Buttons wird die Verfügbarkeit eines Firmware Updates auf den Servern der PEAKnx geprüft und ggf� zum Update angeboten�

Nach dem Anklicken des Buttons Update wird nun der Download durchgeführt, die Firmware aktualisiert und im Anschluss das PEAKnx NET-TV neu gestartet� Dies dauert im Regelfall etwa 2 bis 3 Minuten� Bitte prüfen Sie nach einem Update, ob Sie weitere Funktionalitäten des PEAKnx NET-TVs aktivieren können�

Es ist jederzeit möglich den vorherigen Firmware Stand wiederherzustellen�Gehen Sie dazu wie folgt vor:

■ PEAKnx NET-TV ausschalten�

■ Resetknopf gedrückt halten und PEAKnx NET-TV einschalten�

■ Resetknopf nach mehr als 5 Sekunden loslassen�

■ PEAKnx NET-TV startet selbstständig neu und ist nach etwa 1 Minute wieder erreichbar�

5.5 Zugriff per ClientDas PEAKnx NET-TV kann von SAT>IP konformen Clients (Hardware und Software), UPnP-DMS-fähigen Clients sowie per Browserplugin angesprochen werden� Eine aktuelle Übersicht der offiziellen SAT>IP Clients können Sie unter www�satip�info einsehen�

Hinweis: Einige SAT>IP Clients sind kostenpflichtig zu erwerben.

5.5.1 Zugriff per AppLaden Sie auf Ihr Smartphone, Tablet oder Desktop-PC einen SAT>IP konformenClient� Nach der Konfiguration des Clients können Sie unter einem BetriebssystemIhrer Wahl (z�B� Android, iOS, Windows) auf das PEAKnx NET-TV zugreifen�

Achtung!Während des Updates kann das PEAKnx NET-TV nicht von Clients genutzt werden� Die Verbindung zu eventuell aktiven Clients im Modus Live-TV oder Aufnahme werden unterbrochen�

Beispiel einer Konfiguration unter iOS/Android für die SAT>IP App von Elgato:

Kaufen Sie die SAT>IP App des Herstellers Elgato im iTunes Store oder Google Play Store� Die App ist ein reiner SAT>IP Client für den Betrieb an SAT>IP Servern verschiedener Hersteller� Sie simuliert dabei einen herkömmlichen "Wohnzim-mer-Receiver" auf Ihrem mobilen Devices� Ihnen stehen neben dem Live-TV, noch Funktionen der Kanalsuche, das EPG sowie Timeshift zur Verfügung�

Hinweis: Die Elgato SAT>IP App unterstützt derzeit nur die Empfangsarten DVB-S/S2/T/T2.

Installieren Sie auf Ihrem Tablet/Smartphone die aktuelle Version der Elgato SAT>IP-App� Beim ersten Start erkennt die App das PEAKnx NET-TV auto-matisch�Nach einem Sendersuchlauf (Menüpunkt Einstellungen - Sender suchen) sind alle unverschlüsselten SD-Sender in der App nutzbar� Abbildung 20: Elgato SAT>IP App (Bild: Elgato�com)

Abbildung 21: Elgato Satellite Setup (Bild: Elgato�com)

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com28 29

5.5.2 Zugriff per WindowsInstallieren Sie auf Ihrem Windows Device einen SAT>IP konformen Client� Nach der Konfiguration des Clients können Sie auf das PEAKnx NET-TV zugreifen� Über RTSP-Links kann zum Beispiel auch der VLC Player auf das Gerät zugreifen�Bitte bedenken Sie, dass einige Soft- und Hardwarelösungen nicht dafürgeeignet sind, auch HD-Sender störungsfrei wiederzugeben�

5.5.3 Zugriff per LinuxSie können unter dem Betriebssystem Linux per verschiedenen SAT>IP fähigenSoftwareclients den PEAKnx NET-TV nutzen� Zur Konfiguration beachten Sie bittedie Angaben in der Dokumentation des jeweiligen Anbieters�

5.5.4 Zugriff per Hardware ClientSie können verschiedene SAT>IP fähige Receiver unterschiedlicher Hersteller alsHardwareclient mit das PEAKnx NET-TV nutzen� Zur Konfiguration beachten Siebitte die Angaben im Handbuch des jeweiligen Herstellers�

5.5.5 Zugriff per BrowserTVÜber den Internetbrowser Firefox (Desktop-PC) kann bei installiertem und aktivierten Videolan/VLC Add-on die Funktion BrowserTV genutzt werden�

Über die Menüpunkte Source (Anbieter) sowie Channel (Sender) können entspre-chende Sender zur Wiedergabe ausgewählt werden� Über das Konfigurationsmenü Channel Lists sind diese Punkte anpassbar�

Auf einem iPad kann auch eine alternative Software für das RTSP-Streaming genutzt werden� Hier haben sich die App GoodPlayer und der VLC Media Player als stabile Varianten heraus-gestellt�

5.5.6 Zugriff per M3U-ListenMit dem VLC Media Player kann am PC eine persönliche M3U-Liste erstelltwerden (Download unter http://www�videolan�org/vlc) und unter zahlreichenRTSP-tauglichen Softwareprodukten genutzt werden�

5.6 Betriebszustände

5.6.1 Regulärer BetriebDas PEAKnx NET-TV kann in einem Netzwerk sowohl allein, wie auch gemeinsammit weiteren PEAKnx NET-TVs betrieben werden�Auch SAT>IP Server anderer Hersteller können mit dem PEAKnx NET-TV parallelgenutzt werden�

5.6.2 Kaskadierter BetriebMehrere PEAKnx NET-TVs Netzwerktuner können in einem Netzwerk aktiv sein�

5.6.3 Standby-BetriebDas PEAKnx NET-TV besitzt die automatische Stromsparfunktion� Wird kein Tuner genutzt, verbrauchen diese keinen Strom und das Gerät benötigt noch etwa 3,5 Watt�

Abbildung 22: Browser TV mit dem VLC Media Player Add-on möglich

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com www.peaknx.com30 31

6 FAQ zum PEAKnx NET-TV

Wie kann ich die Satellitenkonfiguration aufrufen?Dies erfolgt direkt und ausschließlich in Ihrem genutzten SAT>IP Client�

Wie kann ich die Sender sortieren?Dies erfolgt direkt und ausschließlich in Ihrem genutzten SAT>IP Client�

Warum kann ich nur SD Sender aufrufen?Einige SAT>IP Clients lassen nur SD Sender zu� Beispielhaft dazu: Die iOS Appvon Elgato konnte HD-Sender in älteren App Versionen anzeigen, mit einem späteren Update wurden die HD-Sender ausgeblendet�

Funktioniert das PEAKnx NET-TV auch direkt im WMC?Nein� Sie ist jedoch über die Zusatzsoftware DVB Link in das Windows Media Center einbindbar�

Ab welcher Version wird das PEAKnx NET-TV bei den Produkten von DVB Logicunterstützt?Ab der Version 4�6�

Funktioniert die Software eyeTV V3 für MAC OS mit meinem SAT>IPServer?eyeTV V3 funktioniert mit SAT>IP Servern ab Version 3�6�2 und unterstützt derzeit NUR die Empfangsart DVB-S/S2�

Wo finde ich mehr Informationen zur mitgelieferten Software QCTV?Sie finden die zugehörige Dokumentation auf dem mitgelieferten USB-Stick�Öffnen Sie den Ordner QCTV und öffnen Sie die PDF install_QCTV�

Welche Alternativen gibt es zum Windows Media Center, welches ab Windows 10 nicht mehr erhältlich ist?Wir empfehlen KODI (früher XBMC), MediaPortal oder DVBViewer Pro� Bei KODI empfehlen wir noch den DVBViewer mit Recording Service, um Live TV zu ermöglichen�

Mehr Infos finden Sie auf den jeweiligen Herstellerseiten: ■ Jetzt mehr über KODI (kostenpflichtig) erfahren - www.kodi.tv ■ Jetzt mehr über MediaPortal (kostenlos) erfahren - www.team-mediaportal.de ■ Jetzt mehr über DVBViewer Pro (kostenpflichtig) erfahren - www.dvbviewer.com

PEAKnx a DOGAWIST Investment GmbH Devision Otto-Röhm-Straße 69 64293 Darmstadt Deutschland

Über PEAKnx

PEAKnx bietet moderne Gebäudesteuerungen durch einzigartige Komponenten, angefangen von einfachen Aktoren und Sensoren bis hin zu modernen Front-End-Panels, die sich in jedes Design einpassen� Damit können Sie Ihr gesamtesGebäude automatisieren� Eine Kombination der neuesten Technologien ermöglicht Ihnen im Zusammenspiel von Design und Funktionalität, sämtliche Anforderungen des modernen Lebensstils an einem zentralen Punkt in Ihrem Haus zu erfüllen�

Wir setzen dabei gleichermaßen auf unsere eigene Entwicklungskompetenz wie auf ausgesuchte, innovative Partner, deren Zusammenarbeit wir suchen, um Ihnen maßgeschneiderte Komplettlösungen anbieten zu können� Dazu zählen nicht nur neuartige Hard- und Softwarekomponenten, sondern auch die dazugehörigen Dienstleistungen, von der Planung des Bauvorhabens über die Beratung, bis zur Umsetzung und Realisierung durch zertifizierte Partner�

Entdecken Sie die Welt von PEAKnx!

Service & Support: +49-6151-6294601 Vertrieb & Administration: +49-6151-6294602 Web: www.peaknx.com E-Mail: [email protected]

PEAKnx KNX User ForumPEAKnx�de

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com32 33

PageIndex

Considered products � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 351� Safety instructions & Tips � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 36

1�1 General information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 361�2 Operational safety � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 361�3 Installation site � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 361�4 Electromagnetic compatibility � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 371�5 Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 371�6 Data backup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 371�7 Support � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 37

2� PEAKnx NET-TV Overview � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 372�1 SAT>IP protocol � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 382�2 PEAKnx NET-TV Server � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 382�3 SAT>IP Clients � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 382�4 Minimum Requirements � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 39

3� General � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 393�1 Delivery content � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 393�2 Specifications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 39

3�2�1 General � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 393�3� Description � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 40

4� Commissioning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 414�1 Network Environment � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 414�2 Input signal � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 41

4�2�1 DVB-S/S2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 424�2�2 DVB-C/C2 and DVB-T/T2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 424�2�3 Common Interface (CI) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 43

5� PEAKnx NET-TV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 435�1 First Step � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 435�2 Connection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 43

5�2�1 2-tuner version of the PEAKnx NET-TV: � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 435�2�2 4-tuner version of the PEAKnx NET-TV: � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 44

5�3 Commissioning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 445�4 Configuration Menu � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 44

5�4�1 Access in Windows 7/8 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 455�4�1�1 Access in Windows XP � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 45

5�4�2 Status Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 455�4�3 System Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 485�4�4 LNB Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 49

5�4�5 SCR Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 505�4�6 UPnP Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 515�4�7 CI Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 515�4�8 Multicast Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 515�4�9 Channel Lists� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 555�4�10 Update � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 55

5�5 Access via client � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 565�5�1 Access via App � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 575�5�2 Access via Windows� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 575�5�3 Access via Linux OS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 585�5�4 Access via Hardware Client � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 585�5�5 BrowserTV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 585�5�6 TV via M3U list � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 59

5�6 Operation conditions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 595�6�1 Regular operation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 595�6�2 Cascaded operation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 595�6�3 StandBy Mode � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 59

6 FAQ to PEAKnx NET-TV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 60About PEAKnx � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 61Notes � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 62Notes � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 63

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com34 35

PageImage List

Image 1: AST>IP� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 37Image 2: PEAKnx NET-TV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 38Image 3: Front View of the PEAKnx NET-TV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 40Image 4: Rear View of the PEAKnx NET-TV ( version) � � � � � � � � � � � � � � � � � � � � � � � � � � � � 40Image 5: Side view of the PEAKnx NET-TV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 41Image 6: PEAKnx NET-TV - Network � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 45Image 7: Exemplary IP address � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 45Image 8: Startscreen of the configuration surface � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 46Image 9: Tuner-Status � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 47Image 10: Stream-Status � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 47Image 11: System Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 48Image 12: LNB Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 49Image 13: Manual Settings LNB � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 50Image 14: SCR Settings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 50Image 15: Static Multicast Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 53Image 16: Static Mulitcast Setup with Samples Astra 19�2 � � � � � � � � � � � � � � � � � � � � � � 54Image 17: stream 10 is streamed permanently only on ports 3,4 and 5 � � � � � � � � � � � 54Image 18: Channel Lists � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 55Image 19: Update � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 56Image 20: Image source > Elgato�com � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 57Image 21: Image source > Elgato�com � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 57Image 22: VLC Media Add-on on Desktop pc in Browser � � � � � � � � � � � � � � � � � � � � � � � � 58

Considered products

The front page Image shows the PEAKnx NET-TV SAT 4 Tuner� All other Product models are identical in their appearance and do only differ in their equipment�

Product names mentioned/used in this document may be existing brands or registered trademarks of their respective owner� They are not explicitly addressed or marked with "TM" or "®"�

Copyright © DOGAWIST Investment GmbH

PEAKnx Otto-Röhm-Straße 69 64293 Darmstadt Germany

www�peaknx�com info@peaknx�com

Manual Version V 1�0 from 04�08�2016

Product Name Model

PEAKnx NET-TV SAT 2 Tuner 2 Tuner for satellite ceceiver

PEAKnx NET-TV SAT 4 Tuner 4 Tuner for satellite ceceiver

PEAKnx NET-TV Kabel 2 Tuner 2 Tuner for cable ceceiver

PEAKnx NET-TV Kabel 4 Tuner 4 Tuner for cable ceceiver

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com36 37

1. Safety instructions & Tips

1.1 General informationPlease read and follow these safety instructions� To ensure reliable operation and long durability of your PEAKnx NET-TV�Keep this manual within reach of the PEAKnx NET-TV for an easy reference at any time� We continuously developed the PEAKnx NET-TV and a recent version of this document can be downloaded from our website�

1.2 Operational safetyThe connection of the PEAKnx NET-TV should be done by a qualified technician or aperson with appropriate knowledge in network technology�

Please contact your supplier if you have the following technical problems with your PEAKnx NETTV: 1� Your PEAKnx NET-TV has come into contact with liquid�2� The PEAKnx NET-TV is not working properly�

If a repair is necessary, please contact our authorized service partners or directly themanufacturer�

Note: Do never leave children unattended play with electrical devices, they can’t recognize possible hazards.

1.3 Installation site ■ To avoid an electric short circuit, you should wait after transporting the device

with the commissioning until it has assumed the ambient temperature�

■ Large temperature or humidity differences can cause condensation moisture build, which can lead to a short circuit�

■ Protect the PEAKnx NET-TV from moisture, dust, heat and direct sunlight�

■ Place the PEAKnx NET-TV on a flat, stable, vibration-free surface in order to avoid

■ accidents�

■ Lightning strike damages (over-voltage damage) can only be avoided if ALL cab-les are disconnected to external devices and networks, including the telephone network in case of a lightning storm� (Most damage is caused by lightning strikes over the antenna / cable TV, followed by damage over the power grid)

1.4 Electromagnetic compatibilityThe guidelines for electromagnetic compatibility (EMC) must be adhered to when connecting the PEAKnx NET-TV�To avoid malfunctions and loss of data, you should keep a minimum distance of one meter from high frequency and magnetic interference sources (from a TV, mobile phone, speakers, etc�)

1.5 CleaningOnly wipe the PEAKnx NET-TV with a soft, dry cloth�Unplug the power plug and the connection cables before cleaning�

1.6 Data backupBefore performing the installation of third party software on your PC, back up your data to an external storage medium (CD, DVD, USB drive, external hard disk)�Claims for damages of any data loss and any resulting consequential damages can’t be claimed�

1.7 SupportSupport and Other via E-Mail:info@peaknx�comRecent information on the PEAKnx NET-TV:www�peaknx�com

2. PEAKnx NET-TV Overview

Image 1: AST>IP

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com38 39

2.1 SAT>IP protocolSAT > IP is a new standard for the reception and distribution of satellite television, which has been developed by the companies SES SA / Luxembourg and Astra Germany GmbH / Unterföhring�SAT> IP is converting television signals from satellite (DVB-S and DVB-S2) into IP signals for the purpose of using them on terminals in the respective network� In this way all IP-based devices like Tablets, PCs, laptops, smartphones, connected TVs, game consoles and media players with TV Programs are supplied via the local network� This allows satellite television in best quality on devices that do not have built-in satellite receiver� Satellite signals can be For further information, please check www�satip�info�

2.2 PEAKnx NET-TV ServerThe PEAKnx NET-TV is basically a server� It is able to stream live TV to IPTV enabled devices within the local network� Thus, the PEAKnx NET-TV Server virtually converts various terminal devices into a Full HD TV for satellite and cable television� Via LAN and / or WLAN free channels are being distributed within the local network in Full HD quality� Depending on the model, up to 4 streams, can be used on stationary and mobile devices simultaneously�

2.3 SAT>IP ClientsFor use on a terminal device, an additional client software is required, if it is not pre-installed� The to-use client software is already available on the market from various producers for the operating systems iOS (iPhone, iPad, iPod), Android, Mac OS and Windows�

Currently in preparation is software for Smart TV, Windows Phone, Windows RT and Kindle Fire HD� A list of available SAT > IP client software is presented on the website: http://www�satip�info

Image 2: PEAKnx NET-TV

2.4 Minimum RequirementsIn order to view HDTV programs properly, high-performance SAT> IP clients or UPnP-enabled clients are needed� High-resolution content (HDTV) requires a pow-erful network and capable clients in order to show content flawlessly� A failure-free HD performance is only assured if an appropriate network and a powerful client are available� SAT > IP clients can cause additional costs, so be sure to check that indivi-dually� An internet browser is required to open the configuration menu of the PEAKnx NET-TV� Network speed should be 1 gigabit (recommended) for a LAN environment, in case of WLAN environments for the N standard (300 Mb/s) are recommended�

3. General

3.1 Delivery content ■ PEAKnx NET-TV SAT>IP (network tuner, 5 Port Switch, casing)

■ integrated Twin CI Interface

■ external power adapter

■ Wall mount

■ USB-stick with QCTV Software

■ Manual

Note: The Software manual for QCTV is found on the Stick QCTV/Install_QCTV.pdf.

3.2 Specifications ■ SAT>IP for up to 4 users (extendable by cascading)

■ SAT > IP protocol version 1�2�2 (upgradeable)

■ Updates through a web configurator (via LAN)

■ Singlecast / Multicast via UDP / RTP

■ 5 port managed Gigabit-Switch (5 x 10/100/100 Ethernet)

■ IPv4 and IPv6 protocols, multicast, IP filtering, full-duplex

■ Twin CI Support

3.2.1 General ■ Power supply via external 12V DC power adapter

■ Power usage: Max� 12 W(4 Tuner) without LNB power

■ Operable temperature range: -10 to 50 Deg� Celsius

■ Size: 45 x 127 x 127 (H x W x L in mm)

■ Weight: 500g

■ Made in Germany

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com40 41

3.3. Description

1. On/Off - Switch2. LED 1 state3. LED 2 state4. Common Interface / CI Slot

1. 5 Gigabit Ethernet ports2. TV-tuner 1 to 4 (depending on model)3. Reset button4. Power connector for external power supply

Image 4: Rear View of the PEAKnx NET-TV ( version)

1. Ventilation slots

4. Commissioning

4.1 Network EnvironmentThe PEAKnx NET-TV can be used in network environ-ments with LAN, WLAN and PowerLan� For trouble-free operation we recommend explicitly the following connection speeds:

■ LAN: 100 Mbit/s network, recommended 1000 Mbit/s (GigaBit) environment

■ Wi-Fi: 54 Mbit/s network, recommended 300 Mbit/s network environment

■ PowerLan: 54 Mbit/s network, recommended 300 Mbit/s network environment

The five ports of the integrated Gigabit switch should preferably be used for terminal devices with SAT > IP Client, since they already have the ideal Quality of Service (QoS) configuration for the operation of SAT> IP as a factory setting�

4.2 Input signalOne asset of our PEAKnx NET-TV is the modular design and expandability for more tuner modules� Depending on the model, the DuoFlex S2 (DVB-S2) and DuoFlex C/C2/T/T2 (DVB-C /DVB-C2 / DVB-T / DVB-T2) series of PEAKnx can be used as a tuner�The following chapters describe the technical specifications of different tuner modules and the Common Interface:

Image 3: Front View of the PEAKnx NET-TV Image 5: Side view of the PEAKnx NET-TV

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com42 43

4.2.1 DVB-S/S2

4.2.2 DVB-C/C2 and DVB-T/T2

Satellite features (DuoFlex S2): Twin Tuner Unicable compliant:

Symbol rate: up to 45Msps DVB-S2 Unicable compliant:

LNB Power: +14 VDC or +18 VDC or without, power supply (up to 500mA)

SCR / CENELEC EN 50494 (Unicable®)

L-band: 950 MHz to 2150 MHz DVB FEC: (Auto Spectral Detection)

Security:Produced and Designed compliant toEuropean Standards DIN EN ISO 9001:2000

Modulation QPSK/8PASK Environmental standards:RoHS Konformität, WEEE DE 99353762

Full support of DiSEqC 2�X

Standard connections:20 pin connector for ribbon cable

L-band F-connectors (IEC 60169-24)(Supports power supply to the LNB)

Features of terrestrial tuners (DuoFlex C/C2/T/T2):

Twin tuner DVB-T/T2 features:

Twin Tuner DVB-C features: Frequency range: 49-861MHz, 2k & 8k OFDM

Frequency range: 51-858 MHz All types of modulation compliant to DVB-T and DVB-T2 specification

Every modulation and code type com-pliant to DVB-C specification

Sensitivity: -82�6 dBm at 16 - QAM & 3/4

Symbol rates from 0�87 to 6�9 Mbaud Security:Produced and Designed compliant toEuropean Standards DIN EN ISO 9001:2000

Sensitivity: 47dbμV (64QAM), 47dbμV(256QAM)

Environmental standards: RoHS Konformität, WEEE DE 99353762

Master / slave mode Both tuners are being supplied by an antenna cable

Standard connections:IEC socket (input), IEC connector (out-put), 20 pin Connector for ribbon cable

4.2.3 Common Interface (CI)

5. PEAKnx NET-TV

5.1 First StepUnpack your PEAKnx NET-TV and check if all components are complete� If you have any questions, please immediately contact our support�

5.2 ConnectionBefore use, all plastic wrapping and packaging aid has to be removed and the PEAKnx NET-TV should be put on a clean and even surface� The fitting with the included adapter for wall mounting should be done only after the completion of the setup� Connect a LAN port of the PEAKnx NET-TV with a network cable, which is connected to the home network (router / switch / access point)� Hence, the PEAKnx NET-TV automatically obtains an IP address, a DHCP server must be active on the network� (e�g� standard on commercial routers)� The PEAKnx NET-TV must be within the same network environment as the terminals� (same IP address range)�

Connect the PEAKnx NET-TV with the cable of your existing receiving system� For the reception of DVB-S2 connect the outputs of the LNB / multi-switch to appropriate antenna cables, each on an PEAKnx NET-TV tuner� If Unicable / LNB / Multiswitch are utilized the wiring of the signal outlets has to be connected to the respective PEAKnx NET-TV tuner through appropriate antenna cables� If necessary, use compliant Unicabel Multiswitch�

Note: The reception of DVB-C/C2 and DVB-T/T2 only requires one cable per twin tuner.

5.2.1 2-tuner version of the PEAKnx NET-TV:Connect the output of an antenna socket or a DVB-T/T2 antenna via an appropriate antenna cable to the input of the PEAKnx NET-TV Twin tuner card (IEC socket)�

Standard connections: Security:

20-pin connector for ribbon cable Produced and Designed compliant toEuropean Standards DIN EN ISO 9001:2000

Power supply via a 4-pin floppy standard connector

Environmental standards:RoHS Compliance, WEEE DE 99353762

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com44 45

The output of the twintuner card (IEC connector) can be used to supply additional devices (eg TV or PEAKnx products) if the PEAKnx NET-TV is in operation� The built-in amplifier ensures that a signal is passed on without any loss in quality

5.2.2 4-tuner version of the PEAKnx NET-TV:The first twin tuner pair should be connected as described in the two-tuner version� Supply the second twin tuner couple with either a separate signal input, for example if you want to use the first twin tuner for DVB-C and the second twin tuner for DVB-T/T2�Or you can use a short antenna cable (optional equipment) to connect the output (IEC connector) of the first twin tuner to the input (IEC connector) of the second twin tuner, if the reception type on both twin tuner pairs is the same�Finally, connect the PEAKnx NET-TV to the grid via the supplied mains adapter� Use only professionally installed main sockets 220-240V(AC) / 50-60Hz�

5.3 CommissioningTurn the PEAKnx NET-TV on using the power switch on the front side�The device then automatically hooks up to the network and receives a free IP address from the DHCP pool of the DHCP server (which typically is a component of routers)� LED 1 on the front side indicates the operating state:

The PEAKnx NET-TV is now ready for use in its original configuration�To turn off the PEAKnx NET-TV, hold the On/Off - switch at least 10 seconds pressed�

5.4 Configuration MenuThe following instructions, for configurating the PEAKnx NET-TV, are based on firm-ware 1�29 (Q3/2014)� A current version of the manual is available on our website www�peaknx�com�

The configuration of the PEAKnx NET-TV is done via a web interface� The PEAKnx NET-TV logs into the network with the name PEAKnx NET-TV� Accessing the configuration interface can be done in the following ways:

Condition Description

Off PEAKnx NET-TV is not in operation mode

Flashing PEAKnx NET-TV is booting up

on PEAKnx NET-TV is ready for operation

5.4.1 Access in Windows 7/8Open computer on the desktop and then select network� The PEAKnx NET-TV appears as PEAKnx NET-TV�Double-click on the device and the configuration interface opens�

5.4.1.1 Access in Windows XPPlease click My Computer on the desk-top and then select My Network Places� The PEAKnx NET-TV appears as PEAKnx NET-TV� Double-click on the device and the configuration interface opens�The configuration interface is also accessible through a browser by entering the IP address�

If you do not know the IP address of the device, please proceed as follows: With the right mouse button click on the PEAKnx NET-TV under Network or My Network Places and select the menu item Display device web page�

Your standard web browser on a PC will then return the configuration web page� The current IP address of the device is displayed in the address bar of your browser�

5.4.2 Status InformationTo get the information of the firmware version of your PEAKnx NET-TV, please call up the configuration interface� More information about your device can be found by selecting the menu item Home�

Image 6: PEAKnx NET-TV - Network

Image 7: Exemplary IP address

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com46 47

The menu option Tuner Status contains detailed information about a maximum of up to 8 tuners of the PEAKnx NET-TV� In addition to displaying the current use of the tuners, further detailed information about the reception (Strength, Quality) can be read out for each individual tuner� By clicking the menu item Stream status additio-nal information about the tuner utilizationis being revealed� Furthermore, enhanced streaming information as well as the client in relation tothe used tuner can be recognized�

Term Description

FW Date Date of the installed firmware version

Linux Version number of the installed Linux kernel

SAT>IP Server Version number of the PEAKnx NET>TV SAT > IP server

FPGA Version number of the FPGA

Boot ID Required to identify multiple PEAKnx NET-TV within a network

Device ID Required to identify multiple SAT > IP Server

Tuner 1-4 Number of detected tuners and their reception method(s)

Image 8: Startscreen of the configuration surface

Image 9: Tuner-Status

Image 10: Stream-Status

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com48 49

5.4.3 System SettingsIn the menu item Layer 2 Quality of Service (QoS), the prioritization of the SAT > IP

streams in their network environment can be selected� Therefore you need hardware (e�g� router, switch) which supports this feature (QoS)� For the configuration, please use the manuals of your network hardware�If the PEAKnx NET-TV after activation of the QoS does no longer function as intended, please disable this menu item again�

Note: The built-in network ports of the PEAKnx NET-TV already has an internal QoS pre-adjusted. For optimal results please give these ports priority while your network hardware is used. The internal QoS feature has no effect on connected Network components which do not support these features.

For access to the PEAKnx NET-TV via telnet, select the appropriate option from the menu�

Warning note! Changes to these system settings should be made only by experienced users

Image 11: System Settings

5.4.4 LNB Settings

This menu item should only be changed upon instruction of PEAKnx support because changes may lead to an impaired SAT reception�After entering the manual LNB configuration, you can directly adapt the setting to your environment� You can choose for which tuner and / or satellite (source) your customization is applied to� Without specifying these fields, the settings are applied to all available tuners�

With the LOF information offset values can be adapted to your environment� Use the guidelines in the manual of your LNB� Your closed configurations are then listed at the bottom� They can easily be removed again by pressing the Clear button�

Warning note!This access type to PEAKnx NET-TV should only use Linux professionals� We don't provide a guarantee based on damage caused by maloperation�

Image 12: LNB Settings

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com50 51

5.4.5 SCR SettingsSCR is only available if a DVBS2 Model is used� For the support of SCR setting in the menu SCR Settings, SCRcompatible hardware (SCR LNB and / or SCR switch) is required� For the installation of these additional components please use the manuals of the respective manufacturer� Through activating the menu item Enable SCR (EN50494) you can assign the SCR channels to the respective tuners� A dual use of SCR channels is not possible� Coordination with other users or terminal configura-tions with SCR is mandatory required�

Image 13: Manual Settings LNB

Image 14: SCR Settings

5.4.6 UPnP SettingsAs soon as a firmware update is being released this category will be available� A recent version of the manual can be accessed on our website at www�peaknx�com�

5.4.7 CI SettingsThe CI in your PEAKnx NET-TV can be used with any program (client), which call RTSP links with M3U lists� In the RTSP links is determined whether a transmitter should be decrypted with an existing CI� Programs that can handle M3U lists, is for example the VLC® player on your PC or MAC� Accordingly, on your mobile device (smartphone or tablet) it is for example the Good Player ®� Of course, it is also possible to use the browser screen TV web interface of the PEAKnx NETTV� According to the SAT>IP standard, DVBViewer GE is currently suitable for the utilization of CIs�

5.4.8 Multicast SetupMulticast allows the streaming of a transponder or individual channels of a transponder into a network� A single tuner is able to process several TV channels simultaneously, which can be watched by any number of network participants� Each tuner can be assigned to another transponder� Basically there are two different methods which can be applied�

A permanent stream of a TV channels or transponders is capable of permanently streaming the signal into the network� Each client can lock into the stream� However, this results in a permanent network load, regardless of whether the TV channel is required or not�

Simply put, IGMP V3 allows that a stream can be requested and, thus, being acti-vated� Basically, the first client involved activates the stream (IGMP join), the next client then may simply lock into the stream and, finally, the last client which leaves the stream disables the stream (IGMP leave)� Thus, the network will only have to handle streams which are actually required�

Essentially, the network components have to support IGMP V3� Some switches / WLAN routers allow IGMP V3 to pass through on all ports, other switches ignore the protocol and do not even let it through� In case of streaming permanently into a WLAN network which does not support IGMP V3, multicast packets will be transmitted, so that the wireless network could quickly experience an overload� As an example the AVM Fritzbox 7390 supports IGMP V3 and by default multicast is let through into the LAN network, but is blocked for WLAN users� Working remains

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com52 53

possible� Thus, it is important that the PEAKnx NET-TV itself can easily separate wireless networks from other wired networks� While permanently streaming, you have the choice to decide which of the 5 ports on the built-in switch, should send the stream�

The PEAKnx NET-TV supports a total of 12 simultaneous streams� Take note: Either a complete transponder (requires 1 stream) can be streamed or instead just your favored channels� Each TV channel occupies a single stream�

Some clients are not able to cope with fully streamed transponders� The software has to split the transponder and the PIDs of the desired program need to be filtered out in order to enable a proper rendering� Regardless of data or radio channels, the transponder is streaming just about everything� Eight transponders quickly reach 500 Mbit / s of data, and that is the amount of data what a network permanently would have to deal with�

There are two other feature that should be noted here only briefly� First it is pos-sible, if not all streams are configured for multicast, access by Singlecast (eg from WLAN) on the PEAKnx NETTV� The PEAKnx NET-TV directs a multicast TV channel to a single-cast participants� Details on that later�

A second possibility is to operate the PEAKnx NET-TV in mixed mode (multicast and single-cast)� For example, multicast use one or two tuners which are then occupied and the other tuners running in single-cast mode�

Note: It is of course possible between multicast and available Singlecast streams at e.g. with 8 tuners to make an own allocation.

The configuration options for the multicast setup:In the configuration menu of the PEAKnx NET-TV under Multicast Setup various sample configurations are included� Here once Astra 19.2 selected�By Sample Download you can download a sample file� Here you can see how the file is built� By Select & Enable a selected entry from the list can be activate�

Through the Browse button, a created file will be loaded into the PEAKnx NET-TV andautomatically uploaded and Enable� By Disable a running multicast will disabled�Configuration Example: If the sample file is enabled, 11 streams normal assigned and a stream 10 (Kika) is streamed permanently only on ports 3,4 and 5�

Image 15: Static Multicast Setup

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com54 55

Under the menu item Stream Status you can now see that a permanent stream of data is sending out� Whether this is from a user is used or not, it does not matter� The other channels will be available only if they become activate when they are reques-ted by IGMP V3�

With the menu item M3U List, a M3U list of the active config can be downloaded via file� This can then, for example, VLC / MediaPortal / XBMC / etc� be used�

Image 16: Static Mulitcast Setup with Samples Astra 19�2

Image 17: stream 10 is streamed permanently only on ports 3,4 and 5

The multicast IP address is created by the PEAKnx NET-TV itself and is not individu-ally changeable� It is made up as follows: 239� <DeviceID> �2� <StreamID> (here, for xample: 239�6�2�10)�

Note: For questions regarding multicast configuration you can contact our support.

5.4.9 Channel Lists

The PEAKnx NET-TV brings some channel lists from various providers from the factory with (automatic update via firmware update)� These are grouped together under System Channel Database� The PEAKnx NET-TV can also handle personalized Channel List�

Note: With the button Delete at any time the factory-supplied System Channel Data-base can be reactivated.

Image 18: Channel Lists

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com56 57

5.4.10 UpdateIn the menu item Update, you can easily update your PEAKnx NET-TV to the latest firmware version�

To use these functionality, the PEAKnx NET-TV must have an active Internet connec-tion� By clicking the Check button, an available firmware update on the server from PEAKnx will be searched and provided�

After you clicked the button Update, the download will be performed, following the PEAKnx NET-TV will restarted� This usually requires about 2 to 3 minutes� Please check for an update if you can enable additional functionality of PEAKnx NET-TV�

It is at any time possible to restore the previous firmware version� Proceed as follows:

■ Turn off PEAKnx NET-TV

■ Press and hold reset button and turn on PEAKnx NET-TV

■ Release the reset button after more than 5 seconds

■ PEAKnx NET-TV restarts automatically and is after about 1 minute reachable again

5.5 Access via clientThe PEAKnx NET-TV can communicate with SAT>IP compliant clients (hardware and software), UPnP DMS Clients and browser-extensions� A latest overview of official SAT> IP clients can be found at www�satip�info�

Note: Some SAT> IP Clients are chargeable to purchase.

Image 19: Update

Warning note!During the update of the PEAKnx NET-TV no clients can be used� The connectionto any active clients in the mode live-TV or recording will be interrupted�

5.5.1 Access via AppInstall on your smart phone, tablet or desktop PC a SAT>IP compliant client�

After the configuration of the client you can on an opera-ting system of their choice (e�g� Android, iOS, Windows) access to the PEAKnx NET-TV�

Example of a configuration on iOS / Android for the SAT> IP app from Elgato:

Buy the SAT>IP App of the manufacturer Elgato from the iTunes Store or Google Play� The app is a pure SAT>IP Client for use with SAT>IP servers from different manufacturers� It simulates a conventional Living room Receiver on your mobile device� The features like are Live-TV, channel scaning, EPG and Timeshift are available�

Note: The Elgato SAT>IP app currently supports only the types of reception DVB-S / S2 / T / T2.

Install on your tablet / smart-phone, the latest version of the Elgato SAT>IP app� When you launch first time the app it will automatically detects the PEAKnx NET-TV� After a channel scan (menu item: Settings - Search stations) are all found unencrypted SD channels in the app usable�

Image 20: Image source > Elgato�com

Image 21: Image source > Elgato�com

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com58 59

5.5.2 Access via WindowsInstall on your Windows Device a SAT>IP compliant client� After configuring the client, you can access the PEAKnx NET-TV� About RTSP links you can access the Server, e�g� through the VLC player�

Note: Some software and hardware solutions are not suitable to show HD channels without interference.

5.5.3 Access via Linux OSThe PEAKnx NET-TV is usable with a Linux operating system with various SAT>IP capable software clients� For the configuration, please refer to the information in the documentation of the respective software provider��

5.5.4 Access via Hardware ClientYou can use various SAT> IP-capable receivers from different manufacturers as a hardware client with the PEAKnx NET-TV� For the configuration, please refer to the information in the respective manufacturer's manual�

5.5.5 BrowserTVAbout the Internet browser Firefox (desktop PC) can with an installed and activated Videolan / VLC Add-on the BrowserTV function be used�

Use the menu items source (providers) and channel for starting a playback� About the Configuration menu (Channel Lists) these points are customizable�

On an iPad, it is possible to use alternative software for receiving RTSP streams in addition to the VLC / Videolan player� Apps like VLC and GoodPlayer are good choices for the receiving of RTSP streams�

5.5.6 TV via M3U listWith the VLC Media Player (Windows OS), a personal M3U list can be created� You candownload this tool under http://www�videolan�org/vlc to create individual lists for M3U lists for numerous software solutions�

5.6 Operation conditions

5.6.1 Regular operationThe PEAKnx NET-TV can be operated in a network either alone, or together with further PEAKnx NET-TV Devices�Also SAT>IP servers from other manufacturers can be used together with the PEAKnx NET-TV�

5.6.2 Cascaded operationSeveral PEAKnx NET-TV network tuner can be active in one network�

5.6.3 StandBy ModeThe PEAKnx NET-TV has a power saving function� If no tuner in used, the PEAKnx NET-TV has a power consumption about 3,5 Watt�

Image 22: VLC Media Add-on on Desktop pc in Browser

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com60 61

6 FAQ to PEAKnx NET-TV

How can I access the satellite configuration?This occurs directly and exclusively on your used SAT>IP Client�

How can I sort the channel?This occurs directly and exclusively on your used SAT> IP Client� Why can I only find Channels in SD?Some SAT> IP Clients allow only SD channels� For example: The iOS app from Elgato shows HD channels in older versions of the App, with a later update the HD channels was removed� Does the PEAKnx NET-TV directly work in WMC?No� But you can use additional software like DVBLink in the Windows Media Center for the use the PEAKnx NET-TV Which version of DVBLink supports the PEAKnx NET-TV?From version 4�6� Is eyeTV V3 for MAC OSX working with my SAT>IP Server?Yes, eyeTV V3 for MAC OSX is working with SAT>IP Servers from Version 3�6�2 or higher but is only supporting DVB-S/S2� Where do I find additional information about the added Software QCTV?You will find additional software contained in the USB stick� Open the pathQCTV/install_QCTV�pdf and you will find a detailed documentation� For further information, visit www�peaknx�com� Are there any existing alternatives to Windows Media Center, that will not be accessible with Windows 10?We recommend KODI (had been XBMC), MediaPortal or DVBViewer Pro� If you consi-der using KODI we suggest to add DVBViewer with recording service to enable Live TV

Additional Information can be found on the developers Homepages: ■ Get to know KODI (Software) - www.kodi.tv ■ Get to know MediaPortal (Freeware)- www.team-mediaportal.de ■ Get to know DVBViewer Pro (Software) - www.dvbviewer.com

PEAKnx a DOGAWIST Investment GmbH Devision Otto-Röhm-Straße 69 64293 Darmstadt Germany

About PEAKnx

PEAKnx offers a modern way to control buildings through the use of unique compo-nents ranging from simple actuators and sensors to modern front-end panels that fit into any interior design� A combination of the latest technologies enables the inter-action between design and functionality to make all the requirements of a modern lifestyle available to you and your family in a central location�

We rely both on our own development competence and on selected innovative part-ners, whose collaboration we seek and offer as a complete solution�In doing so, we offer not only innovative hardware and software components, but also related services - from planning the construction project to consultation, through to implementation and completion by the certified partner�

Discover the world of PEAKnx!

Service & Support: +49-6151-6294601 Sales & Administration: +49-6151-6294602 Web: www.peaknx.com Email: [email protected]

PEAKnx KNX User ForumPEAKnx�de

PEAKnx NET-TV Operating Instructions

www.peaknx.com www.peaknx.com62 63

Notes Notes

PEAKnx NET-TV Bedienungsanleitung

www.peaknx.com64

www�peaknx�com