View
223
Download
3
Category
Preview:
Citation preview
BG 28HGroßdrehbohrgerätRotary Drilling Rig
Geräteträger BS 80BBase Carrier BS 80B
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 1
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
Die BG 28H, ein Gerät mit einemEinsatzgewicht von ca. 96 to und einemDrehmoment von 275 kNm dient zurHerstellung von
• verrohrten Bohrungen (Eindrehen desBohrrohres mit dem Drehgetriebe odermit angebauter Verrohrungsmaschine)
• unverrohrten, flüssigkeitsgestütztenBohrungen
• Bohrungen mit langer Hohlschnecke(SOB) - mit oder ohne Kellyverlängerung
• Sonderverfahren wie VdW-Bohren,Doppelkopfbohren (“verrohrtes SOB-Bohren”), Verdrängerbohrungen,Soil-Mixing Verfahren (CSM und SMW)
The BG 28H rotary drilling rig has anoperating weight of approx. 96 to and atorque of 275 kNm. It is ideally suited for:
• Drilling cased boreholes (installation ofcasing by rotary drive or optionally byhydraulic oscillator – both are poweredby the drilling rig)
• Drilling uncased deep boreholes that arestabilised by drilling fluid
• Drilling boreholes with long hollow stemaugers (CFA system), with or withoutkelly extensions
• Special drilling systems, such as FOW piles, double rotary head drilling(“cased CFA system”), displacementpiles, soil mixing systems (CSM andSMW)
Bohrverfahren mitSerienausstattung:Kellybohren (ohne Verrohrungsmaschine)
SOB-Verfahren (hydraulisch undelektrisch vorgerüstet)
FDP Verdrängerbohren (hydraulischund elektrisch vorgerüstet)
Drilling processes withstandard equipment:Kelly drilling (without casing oscillator)
CFA drilling (pre-equipped withhydraulic and electric installations)
FDP Full-Displacement-Piling (pre-equipped with hydraulic andelectric installations)
1200
Hub / S
troke 1
0000 m
m
Kelly
BK
28/4
19/3
/30 (
A=
12,7
1m
)
4640
5680
4070 - 5250 4300
25415
1100
23300
13670
9790
8680
3670
1900
1880
Abmessungen Dimensions
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 2
Technische Daten Technical specifications
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
Gesamthöhe Overall height 25.415 mm
Einsatzgewicht ca. Operating weight (approx.) (mit BK28/419/3/30) (with kelly BK28/419/3/30) 96.000 kg
Drehantrieb Rotary drive KDK 275 K
Drehmoment bei 320 bar (nom.) Torque at 320 bar (nominal) 275 kNm
Drehzahl max Speed of rotation (max.) 35 U/min (RPM)
Vorschubsystem Crowd system
Druckkraft / Zugkraft Crowd force push / pullVorchubwinde (effektiv) crowd winch (effective) 330 / 330 kN
Druckkraft / Zugkraft Crowd force push / pullgemessen am Drehteller KDK measured at the casing drive adapter on the rotary drive 260 / 280 kN
Hub (Kellysystem) Stroke (kelly system) 10.000 mm
Hub (SOB-System) Stroke (CFA system) 18.410 mm
Geschwindigkeit (ab/auf) Speed (down/up) 8,5 / 8,5 m/min
Schnellgang (ab/auf) Fast speed (down/up) 32 / 32 m/min
Hauptwinde Main winch
Windenklasse Winch classification M6 / L3 / T5
Zugkraft (1. Lage) effektiv/nominal Line pull ( 1st layer) effective/nominal 250 kN / 317 kN
Seildurchmesser / Länge Rope diameter / Length 32 mm / 75 m
Windengeschwindigkeit Line speed max. 80 m/min
Hilfswinde Auxiliary winch
Windenklasse Winch classification M6 / L3 / T5
Zugkraft (1. Lage) effektiv/nominal Line pull ( 1st layer) effective/nominal 80 kN / 100kN
Seildurchmesser / Länge Rope diameter / Length 20 mm / 60 m
Windengeschwindigkeit Line speed (max.) 74 m/min
Mastneigung Mast inclination
nach hinten / vorne / quer Backward / forward / lateral 15° / 5° / 8°
Serienausstattung Standard equipment
• Hauptwinde mit hydraulischer Freilaufsteuerung
• Haupt- und Hilfswinde mit Spezialrillung
• Wirbel für Hauptseil
• Hubendschalter für Haupt- und Hilfswinde
• Drehgetriebe KDK 275K (Konstantgetriebe)
• Schwenkbarer Anschlagpunkt für Haupt- und Hilfsseil
Mess- und Steuerungstechnik• SPS Rechner für alle elektrisch angesteuerten Funktionen
• Bauer Bildschirmeinheit inkl. Diagnosefunktion
• digitale Anzeige der Pumpendrücke
• Anzeige von Fehlermeldungen in Klartext
• Mastneigungsmessung in x/y Richtung (Anzeige digital / analog)
• Mastautomatik (automatische Vertikalstellung)
• Hauptwinde mit elektronischer Seilkraftmessung
• Hilfswinde mit hydraulischer Seilkraftmessung
• Schlappseilabschaltung Hauptwinde
• Funktion „Wirbel Aufstellen“ Hauptwinde
• Tiefenmessung Hauptwinde
• Tiefenmessung Vorschub
• Drehzahlmessung KDK
• Anpresskraft-Einstellung
• Main winch with hydraulically operated freewheeling
• Main and auxiliary winch with special grooving
• Swivel for main rope
• Hoist limit switch on main and auxiliary winches
• Rotary drive KDK 275K (single gear drive)
• Pivoted anchor points for main and auxiliary ropes
Measuring and control equipment• PLC processor for all electrically actuated functions
• Bauer monitor unit with integrated diagnostic capability
• Digital display of pump pressures
• Display of fault messages as plain text
• Mast inclination measurement on x/y axes (digital / analog display)
• Automatic vertical alignment of mast
• Electronic load sensing on main rope
• Hydraulic load sensing on auxiliary rope
• Rope slack prevention on main winch
• Swivel alignment function on main winch
• Depth measuring device on main winch
• Depth measuring device on crowd winch
• Speed measuring device on KDK
• Crowd pressure setting
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 3
Serienausstattung:• integriertes Kellydämpfungssystem• Gleitleisten sind ohne Demontage
des Drehgetriebes auswechselbar• austauschbarer Kellymitnehmer• auswechselbare Mitnehmerleisten• Kardangelenk• Hydraulische Verbindungen mit
Schnellkupplungen• 3 einstellbare Betriebsmodi (siehe
Diagramme)• Transportstützen• Hebegeschirr
Standard equipment:• Integrated kelly damping system• Wear pads exchangeable without
removal of rotary drive• Exchangeable kelly drive adapter• Exchangeable kelly drive keys• Cardanic joint• Quick-release couplers on hydraulic
hoses• 3 selectable modes of operation
(refer to diagrams)• Transport supports• Slings gear for rotary drive
1808
1100570
500
17
66
11
40
60
1
14
30
19
41
800
24
20
Gewicht mit Schlitten 6,5 toWeight c/w sledge
Drehgetriebe Rotary drive
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
KonstantgetriebeSingle gear rotary drive
KDK 275S (Optional)
SchaltgetriebeMulti gear rotary drive
275
M [kN
m] 189
00 12 35
275
M [kN
m]
00 8 35
275
M [kN
m]
n [1/min]
n [1/min]
n [1/min]
71
71
00 8 35
275
M [kN
m]
n [1/min]
126
380
0 18 60
275
M [kN
m] 198
00 12 27
275
M [kN
m]
00 8 27
275
M [kN
m]
n [1/min]
n [1/min]
n [1/min]
84
84
00 8 27
1. Gang Standardbetrieb1st gear standard mode
1. Gang Einrichten und Felsbohren1st gear Set up and rock drilling
1. Gang MD reduziert1st gear MD reduced
2. Gang Standardbetrieb2nd gear standard mode
KDK 275K (Standard)
Darstellung nicht maßstäblichnot to scale
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 4
Geräteträger BS 80B Base carrier BS 80B
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
Motor Engine CAT C11
Nennleistung ISO 3046-1 Rated output ISO 3046-1 313 kW @ 1800 U/min (rpm)
Motor spezifiziert nach Abgasnorm Engine conforms to Exhaust Emission EEC 97/68EC Stage 3Standard und EPA/CARB TIER III
Dieseltank Diesel tank 800 l
Umgebungstemperatur unter Vollast Ambient air temperature (at full power) bis (up to) 45° C
Schalldruckpegel in Kabine Sound pressure level in cabin(EN 791, Anh. A) (EN 791, Annex A) LPA 78 dB(A)
Schalleistungspegel Sound power level (2000/14/EG u. EN 791, Anh.A) (2000/14/EG u. EN 791, Annex A) LWA 113 dB(A)
Hydrauliksystem Hydraulic system Zweikreisbohrhydraulik2-hydraulic circuit system for drilling
Hydraulische Leistung Hydraulic power output(gemessen am Verteilerblock KDK) (measured at inlet to rotary drive) 230 kW
Hydraulikdruck Hydraulic pressure 320 bar
Fördermengen (Hauptkreise + Hilfskreis) Flow rates (main circuits + auxiliary circuit) 2 x 320 l/min + 1 x 130 l/min
Tankvolumen Hydraulic oil tank capacity 900 l
Unterwagen (Teleskopfahrwerk) Undercarriage (Retractable crawler frames) UW 95
Laufwerksklasse Crawler type Typ B 7
Spurweite (eingefahren/ausgefahren) Track width (retracted/extended) 2.500 / 3.700 mm
Fahrwerksbreite (eingefahren/ausgefahren) Overall width of crawlers (retracted/extended) 3.300 / 4.500 mm
3-Steg Bodenplatten Width of triple grouser track shoes 800 mm
Fahrwerkslänge Overall length of crawlers 5.680 mm
Zugkraft effektiv/nominal Traction force effectiv/nominal 730 kN / 860 kN
Fahrgeschwindigkeit Travel speed 1,1 km/h
Serienausstattung Standard equipment
• abnehmbare Raupenträger
• abnehmbarer Ballast ( 5,3 to + 10,5 to)
• Verzurraugen an Raupenträgern
• Aufstiegsleiter zum Oberwagen und Begehung am Oberwagen
• Bordwerkzeugsatz
• Bordbeleuchtungssatz (6 Scheinwerfer)
• elektrische Betankungspumpe
• Diagnoseleiste für hydraulische Funktionen
• Notsteuerung Bohrgerät (Kernfunktionen)
• Motornotsteuerung
• Leerlaufautomatik (zur Verbrauchsoptimierung)
• Komfortfahrerkabine
• Vorbereitung für Radio und CD
• ergonomischer Fahrersitz
• FOPS Dachschutzgitter
• Klimaanlage
• Wisch-Wasch Anlage für Dach- und Frontscheiben
• Trittroste (neben und vor der Kabine)
• Removable crawler side frames
• Removable counterweight ( 5,3 tonnes + 10,5 tonnes)
• Transport securing lugs on crawler units
• Access ladder and catwalk on uppercarriage
• On-board tool set
• On-board lighting set (6 spotlights)
• Electric refuelling pump
• Diagnostic panel for hydraulic functions
• Emergency mode of operation for drilling rig (core functions)
• Emergency mode of operation for engine
• Automatic idling mode (to optimise fuel consumption)
• High-comfort operator’s cab
• Pre-equipped for radio and CD player
• Ergonomically designed operator seat
• Protective roof grate (FOPS compliant)
• Air conditioning system
• Wash and wipe at front and roof windows
• Catwalk (on side and in front of operator’s cab)
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 5
Ausstattungserweiterung Additional equipment options
Zusatzausstattung Optional equipment
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
GrundgerätKompressor (1000m3/h Saugleistung)
Generator (13 kVA)
Panzerverglasung
Komfortfahrersitz
Schutzbelüftung
Bioölbefüllung
Standheizung
Schraubstockanbau
Base carrierCompressor (1000m3/h capacity)
Generator (13 kVA)
Tempered safety glass panels
High-comfort operator seat
Pressurized air conditioning system
Bio-degradable oil
Independent cab heater
Vise attachment
Unterwagen UW 90 B
Unterwagen UW 110
Bodenplatten 900 mm
Drehgetriebe KDK 275 S (Schaltgetriebe)
Drehgetriebe KDK 275 K (mit Spin-off Möglichkeit)
Hilfswinde 100 kN
elektronisches Steuerungs- und Kontrollsystem B-TRONIC 2.1 zum– Überwachen und Steuern der Bohrfunktionen– Erfassen der Betriebsdaten– Visualisieren der Kellyposition
Undercarriage UW 90 B
Undercarriage UW 110
Width of triple grouser track shoes 900 mm
Rotary drive KDK 275 S (multi-geared)
Rotary drive KDK 275 K (c/w spin-off mode)
Auxiliary winch 100 kN
Electronic monitoring and control system B-TRONIC 2.1 for– Monitoring and controlling drilling operations– Acquisition of operating data– Visualisation of kelly position
BohrgerätFreifall Hauptwinde
Freifall Hilfswinde
Wirbel für Hilfsseil
Kameraanbau
Zentralschmierung
Mastabstützung
Drehmomentwandler
Schneckenputzer (Kellysystem)
Vorrüstung Automatikdrehteller
obere Kellyführung
Aufstiegsleiter am Mast
Zusatzscheinwerfer
Verrohrungsmaschinenanbau (max. BV 1500 HD-08)
Mastverlängerung 2 m, klappbar
Drilling equipmentFreefall main winch
Freefall auxiliary winch
Swivel for auxiliary rope
Video camera attachment
Central lubrication system
Mast support unit
Torque multiplier
Auger cleaner (for kelly system)
Pre-equipped for automatic casing drive adapter
Upper kelly guide
Mast access ladder
Additional spotlight set
Oscillator attachment (max. BV 1500 HD-08)
Mast extension 2 m, tiltable
Mess- und SteuerungstechnikSchockiereinrichtung KDK
Fernübertragung der Betriebsdaten, Datenaufzeichnung
Vorschubregelung für Sonderbohrverfahren
Vorschubsteuerung
Ziehassistent für Sonderbohrverfahren
Hilfswinde mit elektronischer Seilkraftmessung
Überlastschutz für Hauptseil
Measuring and control equipmentUni-directional impact function on KDK (for auger discharge)
Remote transmission and recording of process and operating data
Crowd control for special drilling processes
Crowd control system
Tool extraction assistance for special drilling processes
Electronic load sensing on auxiliary rope
Overload protection device on main rope
Ausstattungsvarianten Alternative equipment options
Motor CAT C15 (354 KW @ 1800 U/min) Engine CAT C15 (354 KW @ 1800 rpm)
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 6
Transportdaten Transport data
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
1200
11
80
36
00
31
60
23750
56806030 12040
1200
11
80
36
00
21480
56806030 9770
56804640
11
50
44
03300
1000800 1200
G = 48,7 to
G = 81,3 to
G = 80,5 to
G =
10,5 to
G =
5,3 to G = 8,0 to
mit 2 m Mastverlängerung, seitlich geklapptwith 2 m tilted mast extension
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 7
Anwendungen Applications
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
Kellybohrverfahren Kelly drilling system
3670
17
00
A
B
T
Hw
23300
Bemerkungen zur Bohrdatenermittlungsiehe „Kellystangen 905.518.1“
For further details on the acquisition ofdrilling data please refer to “Kelly Bars 905.518.1”
Unverrohrt Uncased 1.900 mm
Verrohrt Cased 1.600 mm
Ohne BV Without casing oscillator Hw – 0,5 m
Mit BV With casing oscillator Hw – 1,5 m
Zusatzausstattung / optional equipment:
Anbau VerrohrungsmaschineAttachment of hydraulic oscillator
BV 1500 HD-08
Standardverfahren: unverrohrt, oder Einbau der Bohrrohre mit Drehgetriebe
Option: Einbau der Bohrrohre mit angebauterhydraulischer Verrohrungsmaschine
Standard system: Uncased drilling or installation of casingwith rotary drive
Optional: Installation of casing with hydraulicoscillator attached to the drilling rig
Kellytyp A (m) B (m) Gewicht Hw (m) T (m)Type of kelly bar Weight (kg)
BK28/419/3/27 11,71 29,95 5.400 9,40 28,00
BK28/419/3/30 12,71 32,95 5.800 8,70 31,00
BK28/419/3/36 14,71 38,95 6.650 6,70 37,00
BK28/419/4/40 12,71 43,08 8.100 8,70 41,00
BK28/419/4/64 * 18,71 67,08 11.650 2,70 65,00
BK28/419/4/70 * 20,21 73,08 12.750 1,20 71,00
* 2. Gegengewicht 5,3 to erforderlich (ab Kelly 4/60)* allowed with 2nd counterweight 5,3 to only (from kelly 4/60 and more)
Bohrtiefen Drilling depths
Bohrdurchmesser Drilling diameter
Bohrrohrlängen Length of casing sections
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 8
Anwendungen Applications
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
SOB – Bohrverfahren CFA – drilling system
12004070 4300
1100
0
Sch
ne
cke
nlä
ng
e /
Au
ge
r le
ng
th 1
92
20
mm
22080
25680
335
19555
Sch
litte
nh
ub
/ S
tro
ke
of
sle
dg
e 1
84
10
mm
Schlit
tenhub / S
troke o
f sle
dge 1
8410 m
m
80
00
31100
12004070 4300
1100
0
335
Schneckenlä
nge /
Auger
length
19220 m
m
22080
19555
ohne Kellyverlängerung mit Kellyverlängerungwithout kelly extension with kelly extension
Kellyverlängerung -- 8,0 mKelly extension
Bohrtiefe mit Schneckenputzer 17,50 m 25,00 mDrilling depth with auger cleaner
Bohrtiefe ohne Schneckenputzer 17,80 m 25,80 mDrilling depth without auger cleaner
Max. Bohrdurchmesser 1.200 mm 1.200 mmMax. drilling diameter
Max. Zugkraft Vorschubwinde (effektiv) 280 kN 280 kNMax. extraction force crowd winch (effective)
Max. Zugkraft effektiv (Haupt- und Vorschubwinde) 780 kN 780 kNMax. extraction force effective (main- and crowd winch) (500 + 280 kN) (500 + 280 kN)
Max. Anpresskraft 260 kN + Schneckengewicht 260 kN + SchneckengewichtMax. crowd force 260 kN + auger weight 260 kN + auger weight
Schneckenlänge L (inkl. Anfänger) 19,22 m 19,22 mContinuous flight auger length L (incl. starter auger)
bei Verwendung der Mastverlängerung 2 m (Option) erhöhen sich die Bohrtiefen und die mögliche Schneckenlänge um 2 mwhen using the mast extension 2 m (optional) all values for drilling depth and auger length can be extended by 2 m
hydraulische Mastabstützung erforderlich / hydraulic mast support required
Zeichnung mit Traverse für zusätzlichen HauptwindenzugIllustration showing spreader beam for additional pull with main winch
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 9
Anwendungen Applications
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
DKS – Doppelkopfverfahren DKS – double rotary drive system
DKS mit 2 unabhängigen DrehantriebenDrehantriebe sind nicht entkoppelbar
DKS with 2 independent rotary drivesRotary drives cannot be detached from each other
DKS mit Drehantrieb (Schnecke)und Drehmomentwandler (Bohrrohr)
DKS with rotary drive for auger andtorque multiplier BTM for casing
1200
4070 4500
1100
0450
Schlit
tenhub /
Str
oke o
f sle
dge 1
6550 m
m
KDK 275
KDK 280
25415
16815
1200
Schlit
tenhub /
Str
oke o
f sle
dge 1
7145 m
m
4070 4500
1100
0450
KDK 275
BTM 360
17043
25682
Systemvoraussetzungen: Unterwagen UW 110 • zusätzliches Gegengewicht 5.300 kg • Hydraulische MastabstützungSystem requirements: Undercarriage UW 110 • additional counterweight 5.300 kg • Hydraulic mast support
Drehantrieb für Schnecke KDK 275Rotary drive for auger
Drehantrieb für Bohrrohr KDK 280Rotary drive for casing
Durchmesser (max.) 880 mmDiameter (max.)
Bohrtiefe 16,10 mDrilling depth
Zugkraft (max.) 780 kNExtraction force (max.)
Vertikale Relativverschiebung der Drehantriebe 550 mmRelative vertical movement between rotary drives
Einsatzgewicht (ca.) 122.000 kgOperating weight (approx.)
Drehantrieb für Schnecke KDK 275Rotary drive for auger (max. 180 kNm)
Drehantrieb für Bohrrohr BTM 360Rotary drive for casing (max. 360 kNm)
Durchmesser (max.) 880 mmDiameter (max.)
Bohrtiefe 16,70 mDrilling depth
Zugkraft (max.) 780 kNExtraction force (max.)
Vertikale Relativverschiebung von Rohr und Schnecke 550 mmRelative vertical movement between auger and casing
Einsatzgewicht (ca.) 120.000 kgOperating weight (approx.)
KDK 275 + KDK 280 KDK 275 + BTM 360
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 10
Anwendungen Applications
BG 28H – Großdrehbohrgerät BG 28H – Rotary Drilling Rig
Weitere Verfahren Additional systems
Anbauten Fräsverfahren Cutter system attachments
VdWVor-der-Wand BohrenFront-Of-Wall drilling (FOW)
CSMCutter Soil Mixing
SMWSoil Mixing Wand VerfahrenSoil Mixing Wall system
BC / BGAnbau Schlitzwandfräse BCBC Diaphragm wall cutter on BG
FDPVerdrängerbohrenFull Displacement Piling
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 11
BAUER Maschinen GmbHWittelsbacherstraße 5D-86529 SchrobenhausenTel. +49 (0)82 52/97-0Fax +49 (0)82 52/97-1135e-mail: BMA@bauer.dewww.bauer-e.de, www.bauer.de
Technical Specifications are subject to change withoutprior notice and incurring responsibility for machinespreviously sold. The shown machines may have specialequipment. Technical data do not consider power losses.Error and misprints reserved.
Technische Änderungen ohne Vorankündigung undVerpflichtung gegenüber früher gelieferten Geräten. Die abgebildeten Geräte können Sonderausstattungenhaben. Technische Daten ohne Berücksichtigung desWirkungsgrades.Irrtum und Druckfehler vorbehalten. 905.626.1 2/06
Übersicht BG-Geräte Overview BG-Rigs
BG 15H BG 18H BG 20H BG 24H BG 28H
BG 24 BG 28 BG 36 BG 40 BG 48
905-626-1_2-06_BG28H.qxd 01.03.2006 18:08 Uhr Seite 12
Recommended