Corded Rotary Hammers - Hilti€¦ · Corded Rotary Hammers Drill UD 30 Page 32 Rotary hammer TE 1 Page 32 Rotary hammer TE 2 Page 33 Rotary hammer TE 2-S Page 33 Rotary hammer TE

2322 Drilling & Demolition Contents Page Drilling & Demolition Contents Page

Corded Rotary Hammers Drill UD 30 Page 32 Rotary hammer TE 1 Page 32 Rotary hammer TE 2 Page 33 Rotary hammer TE 2-S Page 33 Rotary hammer TE 2-M Page 34 Rotary hammer TE 7 Page 35 Rotary hammer TE 7-C Page 35

Cordless Combihammers Cordless combihammer TE 30-A36 Page 38

Combihammers Combihammer TE 30 Page 39 Rotary hammer TE 30-M AVR Page 39 Combihammer TE 40 Page 40 Combihammer TE 50 Page 40 Combihammer TE 60 Page 41 Combihammer TE 60-ATC-AVR Page 41 Combihammer TE 70-D/AVR Page 42 Combihammer TE 70-AVR Page 42 Combihammer TE 70-AVR/AVR Page 43

Demolition Hammers and Breakers Breaker TE 300-AVR Page 46 Breaker TE 500 Page 46 Breaker TE 700-AVR Page 47 Breaker TE 1000-AVR Page 47 Breaker TE 1500-AVR Page 48 Breaker TE 3000-AVR Page 48

Hammer Drill Bits (SDS) Hammer drill bit 4 - 6 mm TE-C Page 49 Hammer drill bit, multipack, 5 - 7 mm TE-CX Page 49-51 Hammer drill bit sets (metric) TE-CX Page 52 Hammer drill bit TE-CD Page 52 Hammer drill bits, 12 - 16 mm (metric) TE-YX Page 53-54 Percussion core bit TE-Y-BK Page 54-55 Bell-shaped bit TE-Y GB Page 55 Hammer drill bit metric TE-Y Page 56 Hammer drill bit TE-YD Page 56

Chisels Pointed chisel TE-CP-SM Page 57 Narrow-flat chisel TE-CP-FM Page 57 Pointed chisel TE-YP-SM Page 57 Narrow-flat chisel TE-YP-FM Page 58 Wide-flat chisel TE-YP-SPM Page 58 Narrow-flat chisel TE-SP FM Page 58 Pointed chisel TE-SP SM Page 59 Wide-flat chisel TE-SP SPM Page 59 Pointed chisel TE-H28P SM Page 59 Narrow-flat chisel TE-H28P FM Page 60

Accessories Needle adapter and breaker accessories TE 104/106/300 Page 61 Chuck TE Page 61 Supply cord TE 3000-AVR Page 61 Trolley TE 3000-AVR Page 61

Drilling and Demolition

www.hilti.co.za | 08000 23331



2


Drilling & Demolition Systems.

Hilti. Outperform. Outlast.






2

*As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008.

Trade recommendation

Applications

Tools

Weight of tool as per EPTA 1/2003 (kg) * 2.4 kg 2.7 / 2.7 / 2.9 kg 3.5 kg

Max. drilling range 4 –18 mm 4 –22 mm 5 –28 mm

Optimum drilling range 4 –12 mm 4 –12 mm 8 –16 mm

Battery capacity -

Additional features Chuck interface, TE2-M, DRS-S Chuck interface, angular chuck

Rec. chiseling ratio

Working directions

• Anchoring in concrete • Drilling in other materials

TE 2/-M/S

Building construction

Electrical / mechanical

Industry / government

Steel and metal

• Anchoring in concrete

Advantages • Excellent handling

due to low weight

• Two drilling speeds

• Lightest and smallest of all Hilti rotary hammers

• No complex features

TE 1

Weight of tool as per EPTA 1/2003 (kg) * 3.5 kg 4.0 / 4.2 / 4.4 kg 5.5 kg

Max. drilling range 5 –28 mm 4 –28 mm

Optimum drilling range 8 –16 mm 8 –20 mm 14 - 24 mm

Battery capacity - - -

Additional features Chuck interface, angular chuck Chuck interface, 2nd gear Chuck interface, AVR

DRS-M TE 30-C/-M with AVR


Applications

• Anchoring in concrete • Drilling in other materials

• Anchoring in concrete • Light corrective chiseling

ToolsTE 7 DRS TE 7 C TE 30/-C/-M

Advantages• Long lifetime

• Powerful drilling

• Wide range of accessories for versatile use

• Long lifetime

• Powerful drilling

• Wide range of accessories for versatile use

• High performance for fast drilling and easy chiseling

• Wide application range (second gear and chiseling)

Electrical

Mechanical

Building construction Building construction

Steel and metal

Mechanical

• Anchoring in concrete• Dustless drilling in sensitive

environments

*As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008.


Working directions

• Unmatched performance with the entire TE-C range

• Maximum working comfort through AVR

TE 40


• Light chiseling

Industry / government


Steel and metal l


Electrical / mechanical

Interior finishing

SDS plus SDS plus SDS plus SDS plus SDS plus SDS plus






2

* As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008. ** Hilti values following preliminary EPTA Standard 05-2009.


Applications

Working directions

Weight of tool as per EPTA 1/2003 (kg) * 3.8 kg 5.6 kg 7.9 kg 10.5 kg

Max. single impact energy** 3.3 J 7.5 J 11.5 J 21 J

Additional features Needle Adapter AVR Dust removal module (optional)

Advantages • Wall breaker with excellent performance-to- weight ratio

ToolsTE 500

Mechanical

Electrical


• Chiseling on masonry and concrete

• Channeling



Applications

Weight of tool as per EPTA 1/2003 (kg) * 5.7 kg 6.3 / 7.4 kg 7.7 /8.9 kg 10.2 kg

Max. single impact energy ** 5.2 J 7.0 J 11.0 J 11 J

Optimum drilling range 16 - 25 mm 18 – 30 mm 22– 80 mm 22-150mm

Optimum coring range 45 - 68 mm 45 –90 mm 60– 150 mm -

Additional features DRS-S ATC, AVR, DRS-S, DRS-B ATC, DRS-B Needle adapter

• The most powerful combihammer in its class

• Safety orientation thanks to ATC

• Extremely robust

• Best performance-to-weight ratio

• AVR: lowest level of vibration in its class

Advantages • Very light and compact tool for daily use with long trigger times

• Lightest TE-Y 5kg-class combihammer

• Entry-level tool with excellent performance-to- weight ratio

• High performance multi-functional tool

• ATC for extra safety

• AVR for higher comfort

ToolsTE 300TE 50 TE 60


Interior finishing

Electrical


Mechanical

Mechanical

Electrical


Mechanical


Mechanical

• Corrective chiseling

• Surface work to remove plaster tiles, concrete lines etc.


• Light chiseling

• Anchoring, coring and through holes in concrete

• Chiseling and demolition

• Hammer drilling in concrete, masonry and natural stone in the 22 to 150 mm diameter range.• Chiseling and

demolition

• Anchoring and coring in concrete and masonry

• Chiseling and channeling

TE 70 TE 80


Working directions

SDS plus

• Highest impact energy in 7kg class (11,5J)

• Brushless SR drive - outstanding lifetime

• Power reduction - more flexibility

TE 700


Mechanical

Electrical

• Wall demolition on masonry brickwall

• Heavy tile removal on wall floor

• Rated input power 1850 W

• Full hammering frequency 1890 impacts/minute

• Reduced impact energy

TE 800


Mechanical

Electrical

• Wall & floor demolition on masonry brickwall

• Penetrations/openings & corrective chiseling






2


Applications

Working directions

Weight of tool as per EPTA 1/2003 (kg) * 12.5 kg 14.2 kg 29.9 kg

Max. single impact energy** 26.0 J 30.0 J 68 J

Additional features AVR, brushless SR motor AVR, brushless SR motor AVR, brushless SR motor

• Top demolition performance thanks to high impact energy

• AVR system for higher productivity, longer trigger times and high comfort

• Longer service intervals due to brushless SR motor

• AVR system for higher productivity, longer trigger times and high comfort

Advantages • Minimal vibration - less than 7m/s², i.e. over 4 hours permissible trigger time

• Maintenance -free SR motor

ToolsTE 3000


Civil engineering


Civil engineering


Civil engineering

• Breaking up asphalt for road building, repair work and pipe laying • Unlike air tools, needs no compressor therefore versatile

• Demolishing concrete and masonry at floor level or below waist level

• Renovation of all kinds of floors

• Demolition and penetrations at floor level or below waist level

• Renovation of all kinds of floors


TE 1000 TE 1500 AVR

Notes:






2

Cordless System

Hilti. Outperform. Outlast.

The Hilti Power Effect

Hilti tools plus Hilti accessories.Total Performance.

Hot stuff.Accessories by Hilti for the workshop and jobsite.

Research and developmentWe go to great lengths to even further improve the per-formance, durability and life of Hilti accessories. In com-plex tests, for example, we confirm the life-expectancy of our hammer drill bits under the toughest conditions and prove that they practically never get stuck when drilling into rebars.

Drilling anchor holesWe make our ownWe manufacture most of our innovative power tool acces-sories ourselves. That’s why we can guarantee, among other things, that a Hilti drill bit will be replaced free of charge in the event of breakage – so long as the wear mark on the helix is still visible.

Drilling penetrationsHealth and safety Working on metals1 + 1 = 3Hilti power tools and accesso-ries are developed together, tested together and are thus perfectly matched. You there-fore benefit from the Hilti power effect – a level of sys-tem performance that adds up to much more than just the sum of its parts.

Cutting, grinding and slitting

TE-CX / TE- YX hammer drill bits From page XY onwards

TE-C / TE- Y hammer drill bits From page XY onwards

DD-BL diamond core bits From page XY onwards

Special / univer-sal performance abrasive discs From page XY onwards

Special / universal performance cutting discs From page XY onwards

Special / universal performance slitting discs From page XY onwards

Recip saw blades From page XY onwards

Bimetal hole saws From page XY onwards

Bit and socket sets From page XY onwards

DG-CW diamond cup wheels From page XY onwards

Many dishes need a touch of chili to bring out their full flavor. The same applies to your tools in the workshop and on the jobsite – only with the right Hilti accessories do they reach their full potential.

Hot stuff. Accessories by Hilti: www.hilti.co.za

All of your accessories from Hilti.For drilling, grinding, cutting and fastening.




Drill UD 30

Technical dataRated input power 650 W

Number of gears 2

Rotation speed gear 1 under no load

1200 rpm


3300 rpm

Max. torque 51 Nm (soft joint)

Max. torque (soft joint)

51 Nm

Weight according to EPTA Procedure 01/2003

2.4 kg

Working mode Drilling only

A-weighted emis-sion sound power level1)

97 dB (A)

A-weighted emis-sion sound pres-sure level1)

86 dB (A)

1) according to EN 60745

Key applications & advantages■ Drilling in steel and sheet metal■ Drilling in wood with auger bits, paddle

bits and Forstner bits■ Various screwdriving jobs■ Low weight for unique working comfort■ Choice of keyless chuck with spindle

lock for single-hand operation or robust key chuck

Ordering designation Package contents Sales pack quantity

Item number

UD 30 230V 1x Drill UD 30 230V, 1x Case 1 pc 211974

Rotary hammer TE 1



2.4 kg

Working mode Hammer drilling

Number of gears 1

Optimum drilling di-ameter in concrete

4 - 12 mm

Optimum drilling di-ameter in concrete - max.

12 mm

Optimum drilling di-ameter in concrete - min.

4 mm

Depth gauge Yes

Dust removal module

TE DRS-S (optional)

Reversing switch Yes

Key applications & advantages■ Everyday hammer drilling in concrete,

masonry and natural stone■ Reverse rotation is useful for removing

stuck drill bits■ Single-mode SDS rotary hammer (ham-

mer drilling)■ Sturdy motor with high load rating for

maximum reliability


Item number

TE 1 230V box 1x Rotary hammer TE 1 230V assy 1 pc 355439TE 1 230V (4) cas 1x Rotary hammer TE 1 230V assy, 1x Case 1 pc 405012



2

Rotary hammer TE 2

Technical dataRotation speed gear 1 under no load

1200 rpm


2.7 kg

Working mode Hammer drilling, Drilling only

Number of gears 1


4 - 12 mm


12 mm


4 mm

Depth gauge Yes

Dust removal module

TE DRS-S (optional)



masonry and natural stone■ Ocassional drilling in steel, wood

and plastics using the optional chuck adaptor

■ Driving screws using the optional bit holder

■ Dual-mode SDS rotary hammer (ham-mer drilling and drilling)

■ Sturdy motor with high load rating for maximum reliability


Item number

COMBO TE2 3PACK 1 pc 3444065TE 2 230V box 1x Rotary hammer TE 2 230V 1 pc 383248TE 2 230V cas 1x Rotary hammer TE 2 230V, 1x Case 1 pc 228080

Rotary hammer TE 2-S



1200 rpm


2.7 kg

Working mode Hammer drilling, Drill-ing only, Fine hammer drilling

Number of gears 1


4 - 12 mm


12 mm


4 mm

Depth gauge Yes

Dust removal module

TE DRS-S (optional)


masonry and natural stone■ Precision hammer drilling setting for

drilling in concrete and masonry as well as brittle materials such as tiles and stone

■ Ocassional drilling in steel, wood and plastics using the optional chuck adaptor

■ Triple-mode SDS rotary hammer (ham-mer drilling, drilling and precision ham-mer drilling)



Item number

TE 2-S 230V box 1x Rotary hammer TE 2-S 230V 1 pc 383250

https://www.hilti.co.za/drilling-and-demolition/corded-rotary-hammers/sc-CLS_CORDED_ROTARY_HAMMERS







Rotary hammer TE 2-M



1200 rpm


2.9 kg

Working mode Hammer drilling, Drilling only

Number of gears 2


4 - 12 mm


12 mm


4 mm

Depth gauge Yes

Dust removal module

TE DRS-S (optional)


masonry and natural stone■ 2 gears for optimal drilling speed in

steel, wood and plastics using the optional quick-release chuck

■ Driving screws using the optional bit holder

■ Triple-mode SDS rotary hammer (ham-mer drilling plus 2 gears for rotary-only drilling)



Item number

TE 2-M 230V cas 1x Rotary hammer TE 2-M 230V, 1x Quick-release chuck assy, 1x Case 1 pc 228106

Rotary hammer TE 7



1050 rpm


2.9 kg

Number of gears 1


4 - 12 mm


12 mm


4 mm

Depth gauge Yes

Dust removal module

TE DRS-M (optional)


Key applications & advantages■ Drilling and hammer drilling in concrete

and masonry■ Occasional drilling in wood and steel

with optional quick-release chuck■ Drilling in concrete in clean areas using

the integrated dust removal system (DRS-M)

■ Ergonomically designed D-grip for com-fortable use over long periods

■ Robustly built and superbly engineered for maximum reliability and long life


Item number

TE 7 230V box 1x Rotary hammer TE 7 230V 1 pc 428643TE 7 230V +DRS cas 1x Rotary hammer TE 7 230V, 1x Dust removal module TE DRS-M, 1x Case 1 pc 428645



2

Rotary hammer TE 7-C



740 rpm


3.4 kg

Working mode Hammer drilling, Drilling only, Chiselling, Chisel setting

Number of gears 1


6 - 16 mm


16 mm


6 mm

Depth gauge Yes

Dust removal module

TE DRS-M (optional)

Key applications & advantages■ Drilling and hammer drilling in concrete

and masonry■ Corrective chiseling and small channel

openings in concrete■ Occasional drilling in wood and steel

with optional quick-release chuck■ Ergonomically designed D-grip for com-

fortable use over long periods■ Robustly built and superbly engineered

for maximum reliability and long life


Item number

TE 7-C 230V 1x Rotary hammer TE 7-C 230V, 1x Chuck assy, 1x Case 1 pc 202928




Documents

Corded Rotary Hammers - Hilti€¦ · Corded Rotary Hammers Drill UD 30 Page 32 Rotary hammer TE 1 Page 32 Rotary hammer TE 2 Page 33 Rotary hammer TE 2-S Page 33 Rotary hammer TE