View
58
Download
1
Category
Preview:
DESCRIPTION
Chalking
Citation preview
7/16/2019 Iso 4628-6 Chalking
http://slidepdf.com/reader/full/iso-4628-6-chalking 1/7
ICS 87.040
Beschichtungsstoffe – Beurteilung von Beschichtungsschäden –Bewertung von Ausmaß, Menge und Größe von Schäden – Teil 6:Bewertung des Kreidungsgrades nach dem Klebebandverfahren(ISO 4628-6 : 1990)
European Standard EN ISO 4628-6 : 2001 has the status of a DIN Standard.
A comma is used as the decimal marker.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, withoutalteration, International Standard ISO 4628-6 as a European Standard.
The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffeund Beschichtungen (Coatings and Coating Materials Standards Committee), Technical Committee Allge-
meine Prüfverfahren für Beschichtungsstoffe und Beschichtungen.
DIN 53230 and DIN ISO 4628-1*) are the standards corresponding to International Standard ISO 4628-1referred to in clause 2 of the EN.
Amendments
DIN 53223, December 1973 edition, has been superseded by the specifications of EN ISO 4628-6, which isidentical to ISO 4628-6.
Previous edition
DIN 53223: 1973-12.
National Annex NA Standard referred to(and not included in Normative reference )
DIN 53230 Rating system for the evaluation of tests on paints, varnishes and similar coatings
*) Currently at draft stage.
Ref. No. DIN EN ISO 4628-6 : 2002-02English pr ice group 06 Sales No.1106
06.02
DEUTSCHE NORM February 2002
EN ISO 4628-6
{
Continued overleaf.
EN comprises 5 pages.
© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut f ü r Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen) .
Paints and varnishes – Evaluation of degradation of paint coatings –Designation of intensity, quantity and size of common types of defect
Part 6: Rating of degree of chalking by tape method (ISO 4628-6 : 1990)
English version of DIN EN ISO 4628-6
Supersedes DIN 53223,December 1973 edition.
7/16/2019 Iso 4628-6 Chalking
http://slidepdf.com/reader/full/iso-4628-6-chalking 3/7
English version
ICS 87.040
Paints and varnishes
Evaluation of degradation of paint coatings – Designation ofintensity, quantity and size of common types of defect
Part 6: Rating of degree of chalking by tape method
(ISO 4628-6 : 1990)
© 2001. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.
Ref. No. EN ISO 4628-6 : 2001 E
Beschichtungsstoffe – Beurteilung vonBeschichtungsschäden – Bewer-tung von Ausmaß, Menge und Größevon Schäden – Teil 6: Bewertung desKreidungsgrades nach dem Klebe-bandverfahren (ISO 4628-6 : 1990)
This European Standard was approved by CEN on 2001-10-04.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of anational standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.
The European Standards exist in three off icial versions (English, French, German). A version in any other language made by translation under the responsibi lity of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.
EN ISO 4628-6
October 2001
Management Centre: rue de Stassart 36, B-1050 Brussels
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
ÈÉË
Peintures et vernis – Evaluation de ladégradation des surfaces peintes –Désignation de l’intensité, de la quan-tité et de la dimension des types cou-rants de défauts – Partie 6: Cotationdu degré de farinage par la méthode duruban adhésif (ISO 4628-6 : 1990)
7/16/2019 Iso 4628-6 Chalking
http://slidepdf.com/reader/full/iso-4628-6-chalking 4/7
Page 2EN ISO 4628-6 : 2001
Foreword
International Standard
ISO 4628-6 : 1990 Paints and varnishes – Evaluation of degradation of paint coatings – Designation of inten-sity, quantity and size of common types of defect – Part 6: Rating of degree of chalking bytape method,
which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization,has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is held
by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by April 2002 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 4628-6 : 1990 was approved by CEN as a European Standard withoutany modification.
7/16/2019 Iso 4628-6 Chalking
http://slidepdf.com/reader/full/iso-4628-6-chalking 5/7
Page 3EN ISO 4628-6 : 2001
7/16/2019 Iso 4628-6 Chalking
http://slidepdf.com/reader/full/iso-4628-6-chalking 6/7
Page 4EN ISO 4628-6 : 2001
Recommended