2
www.bonnema.co [email protected] 13.02.2013 Project 6 Pro: 301-0010 DE Kunde: GEA Heat Exchangers Herausforderung: Die Lagerung von langen Metall- rohren für die Herstellung von Wärmetauschern. Die Länge der Metall-Rohre betrug max. 8200mm. Diese sehr langen Rohre sind sehr schwer zu lagern und wurden auf dem Boden neben der Sägemaschine hin- gelegt. Dies war eine gefährliche Situation für die Mitarbeiter und für die Materialien. Sie brauchten ein System, dass auf der gleichen Fläche alle Rohr- Materialien sicher lagern konnten. Lösung: Wir haben unser "JUMBO"-Storage-System auf die Bedürfnisse der GEA angepasst. Die Länge des Speichersystems ist 8000mm mit der Unterstützung mehrerer Arme. Eine Schublade kann 1000 Kg spei- chern, es gibt 6 Schubladen und ein Dach, um zusätz- liche Materialien zu lagern. Jede Schublade ist 720 x 200 groß. Dies reicht aus, um das Material zu lagern. Das System wurde an der Wand installiert und die großen Rohr-Pakete können aufgrund der ausziehba- ren Schubladen ohne Probleme gelagert werden. ENG Customer: GEA Heat Exchangers Challenge: Storage of long metal tubes for the produc- tion of heat exchangers. Length of the metal-tubes are max 8200mm. These very long tubes are very hard to stock and were put on the ground next to the sawing machines. This was creating a dangerous situation for employees and the materials. They needed a system that could be installed on the same floor area and could stock all the tube material in a safe way. Solution: We redesigned our “JUMBO” storage systems to the needs of GEA. The length of the storage system is 8000mm with multiple support arms. 1000 Kg per draw- ers, 6 drawers + a roof-top to put extra material. Each drawers is 720 x 200, which is enough to store all the material. The system is installed against the wall and due to the pull-out drawers the large tube packages can be stocked save and without any problems.

Die Herausforderung; Langgut sicher & Schnell entnehmen

Embed Size (px)

Citation preview

Page 1: Die Herausforderung; Langgut sicher & Schnell entnehmen

www.bonnema.co [email protected]

13.02.2013

Project 6

Pro: 301-0010

DE

Kunde: GEA Heat Exchangers

Herausforderung: Die Lagerung von langen Metall-rohren für die Herstellung von Wärmetauschern. Die

Länge der Metall-Rohre betrug max. 8200mm. Diese

sehr langen Rohre sind sehr schwer zu lagern und

wurden auf dem Boden neben der Sägemaschine hin-

gelegt. Dies war eine gefährliche Situation für die

Mitarbeiter und für die Materialien. Sie brauchten ein

System, dass auf der gleichen Fläche alle Rohr-

Materialien sicher lagern konnten.

Lösung: Wir haben unser "JUMBO"-Storage-System auf

die Bedürfnisse der GEA angepasst. Die Länge des Speichersystems ist 8000mm mit der Unterstützung

mehrerer Arme. Eine Schublade kann 1000 Kg spei-

chern, es gibt 6 Schubladen und ein Dach, um zusätz-

liche Materialien zu lagern. Jede Schublade ist 720 x

200 groß. Dies reicht aus, um das Material zu lagern.

Das System wurde an der Wand installiert und die

großen Rohr-Pakete können aufgrund der ausziehba-

ren Schubladen ohne Probleme gelagert werden.

ENG

Customer: GEA Heat Exchangers

Challenge: Storage of long metal tubes for the produc-

tion of heat exchangers. Length of the metal-tubes are

max 8200mm. These very long tubes are very hard to

stock and were put on the ground next to the sawing

machines. This was creating a dangerous situation for

employees and the materials. They needed a system that

could be installed on the same floor area and could stock

all the tube material in a safe way.

Solution: We redesigned our “JUMBO” storage systems

to the needs of GEA. The length of the storage system is

8000mm with multiple support arms. 1000 Kg per draw-

ers, 6 drawers + a roof-top to put extra material. Each

drawers is 720 x 200, which is enough to store all the

material. The system is installed against the wall and

due to the pull-out drawers the large tube packages can

be stocked save and without any problems.

Page 2: Die Herausforderung; Langgut sicher & Schnell entnehmen

Faxformular

Name: _________________________________

Position: _________________________________

Firma: _________________________________

Branche: _________________________________

Straße: _________________________________

PLZ/Ort: _________________________________

Telefon: _________________________________

Fax: _________________________________

Email: ___________________________________

Oder Firmenstempel:

Antwort per:

E-Mail

Telefon

Ads: 301-0010

Kostenloser Katalog Termin Angebot Kontaktaufnahme