Creating a MDS (Material Data Sheet) in the IMDS (International ... · Alle Rechte vorbehalten, auch bzgl. jeder Verfügung, Verwendung, Reproduktion, Bearbeitung, Weitergabe sowie

Alle Rechte vorbehalten, auch bzgl. jeder Verfügung, Verwendung, Reproduktion, Bearbeitung, Weitergabe sowie für den Fall von Schutzrechtsanmeldungen1

Creating a MDS (Material Data Sheet) in the IMDS (International Material Data System)

Jennifer Witthoeft | 16.10.2014 | Engineering Truck IAP/PAC12 | © AVENTICS 2014

• Opening the website of IMDS: https://www.mdsystem.com/imdsnt/

• Fill out login information and then click

Figure 1




• Click MDS → New → Datasheet → Component ( see Figure 2 )

Figure 2




Figure 3

Description in English

Enter the part number of AVENTICS

Enter the Weight & Tolerance

• Entering the information

Alle Rechte vorbehalten, auch bzgl. jeder Verfügung, Verwendung, Reproduktion, Bearbeitung, Weitergabe sowie für den Fall von Schutzrechtsanmeldungen

• Click Add a Material reference ( see Figure 4 )

4



Figure 4




Figure 5

• Enter the material according to the drawing with *…….*

• Mark all ( see Figure 5 )

• Click

Enter material with *……*


• Select the material from the list and click

6



Figure 6

Recommendation:

• For standard materials with classifications 1.1 to 2.1.2 as well as 3.1 and 3.2 you only should use published data

sheets from the “IMDS Committee” (ID 423), “IMDS Committee/ILI Metals” (ID 18986) or “Stahl und Eisen Liste“ (ID

313) .

• For materials with classifications 1.1 to 2.1.2 as well as 3.1 and 3.2 there has to be a description / or a description

is required according to the current valid standard.

• Important: About any additions in the name field , as for example the trading name , the result will be a rejection.

• For standard materials with classifications 1.1 to 2.1.2 as well as 3.1 and 3.2 the standard has to be specified.

Company standards are not permitted in this field.




• Enter the weight and click

Figure 7




• If the part contains more materials

• At first click and then . Repeat the process of sheet 5, 6 and 7.

Figure 8




• Click Supplier Data and fill out your company details.

Figure 9




• Click on Recipient data and then click “ add recipient “

Figure 10




• Enter the company ID from AVENTICS GmbH 70476, and click

• Then click

Figure 11


Figur 12

12



• On the next page fill out the information:

• At last click on

Name

Part/Item No.

Drawing No.

Drawing dated

Drawing Change Level

Documents

Creating a MDS (Material Data Sheet) in the IMDS (International ... · Alle Rechte vorbehalten, auch bzgl. jeder Verfügung, Verwendung, Reproduktion, Bearbeitung, Weitergabe sowie