A subsidiary of

www.ghm-messtechnik.de

Professional InstrumentsMade in Germany

Made in Germany

SIL 2

Hiermit wird bestätigt, dass die

Inhaber des Zertifikates Nr. FS 528548/2985D

ein Qualitätsmanagementsystem gemäß DIN EN ISO 9001:2008 für den folgenden Geltungsbereich anwendet:

Für und im Namen von BSI:

Geschäftsführung, BSI Management Systems (Deutschland)

Ursprünglich zertifiziert: 12.01.1996 Letzte Ausgabe: 05.05.2010 Ablaufdatum: 23.05.2012

GHM Gruppe vertreten durch die GHM Messtechnik GmbH Hans-Sachs-Straße 26 93128 Regenstauf Deutschland mit den im Anhang aufgeführten Unternehmen

Entwicklung, Fertigung und Vertrieb von mess-, steuer- und regeltechnischen Komponenten für industrielle Anwendungen

Dieses Zertifikat wurde elektronisch erstellt und bleibt Eigentum der BSI und ist an die Vertragsbedingungen gebunden. Ein elektronisches Zertifikat kann online beglaubigt werden. Kopien können auf www.bsigroup.de/de/Audit-und-Zertifizierung/138880/ oder per Telefon +49 (0) 6181 99370 validiert werden. Die British Standards Institution ist eingetragen in die Royal Charter. BSI Management Systems und Umweltgutachter Deutschland GmbH, Dörnigheimer Straße 2a, 63452 Hanau, Deutschland.

QUALITÄTSMANAGEMENTSYSTEM – DIN EN ISO 9001: 2008

QMS/EMS-TGA-ZM-08-92

Seite: 1 von 2

Zertifikat

Hiermit wird bestätigt, dass die

Inhaber des Zertifikates Nr. FS 528548/2985/2D

das Qualitätsmanagementsystem der GHM Gruppe, Zertifikat Nr. FS 528548/2985D, gemäß DIN EN ISO 9001:2008 für den folgenden Geltungsbereich anwendet:

Für und im Namen von BSI:

Geschäftsführung, BSI Management Systems (Deutschland)

Ursprünglich zertifiziert: 12.01.1996 Letzte Ausgabe: 05.05.2010 Ablaufdatum: 23.05.2012

Honsberg Instruments GmbH Tenter Weg 2-8 42897 Remscheid Deutschland

Entwicklung, Fertigung und Vertrieb von mess-, steuer- und regeltechnischen Komponenten für industrielle Anwendungen

Dieses Zertifikat wurde elektronisch erstellt und bleibt Eigentum der BSI und ist an die Vertragsbedingungen gebunden. Ein elektronisches Zertifikat kann online beglaubigt werden. Kopien können auf www.bsigroup.de/de/Audit-und-Zertifizierung/138880/ oder per Telefon +49 (0) 6181 99370 validiert werden. Die British Standards Institution ist eingetragen in die Royal Charter. BSI Management Systems und Umweltgutachter Deutschland GmbH, Dörnigheimer Straße 2a, 63452 Hanau, Deutschland.

QUALITÄTSMANAGEMENTSYSTEM – DIN EN ISO 9001: 2008

QMS/EMS-TGA-ZM-08-92

Seite: 1 von 1

Zertifikat

A subsidiary of

Quality "Made in Germany"

The GHM Messtechnik companies develop and manufacture all devices and systems exclusively in Germany. With the merger, the product portfo-lio increased significantly.Well-known corporations appreciate our quality "Made in Germany".

Synergies

Following the merger of the companies GREISINGER electronic, Honsberg Instruments and Martens Elektronik in 2009, GHM Messtechnik was established, thus providing enhanced competence for all aspects of measurement and indus-trial electronics. In March 2010, Imtron Messtechnik was integrated as fourth company into the GHM group.

With approx. 200 employees and more than 30 developers at the four locations Regenstauf, Remscheid, Barsbüttel and Owingen, we are offering an extensive product portfolio for the requirements of the following segments:

Laboratory Measurement Industrial Electronics Process Engineering Industrial Measurement Test Bench Measurement

Our sales network with eight sales engineers covering whole Germany, provides excellent technical support. Fur-thermore there is a world-wide presence with GHM sales subsidiaries in the Czech Republic and the Netherlands, as well as sales representatives and representations all over Europe, North and South America, Asia, and Africa.

Our Ambition - Your Advantage

As a specialist and full-range supplier of measurement technology we develop customized and market-driven solutions for you, matching the high demands of the industry.

State-of-the-art 3D CAD systems for development of inhouse and customer-specific products.

Flexibility and Innovation

These two terms belong together and are the driving force behind the success of GHM Messtechnik.

We find solutions for the requirements of our customers in addition to the substantial standard program.

Shielded EMC chambers for all necessary testing

Pressure test up to 1000 bar

State-of-the-art Altium 3D layout

Just ask us ...

Competence in Measurement Technology

Our products meet all special standards:

• DIN EN ISO 9001 standard for quality management systems

• Safety Integrity Level (SIL2)• DIN EN 14597• Ex-Approval according to ATEX

• Classification of shipping GL (Germanischer Lloyd)

• EC-Certificate of conformity• etc.

Test bench for IP protection rating

pH

Redox

°C

µS/cml/minm³/h %r.F.°Fbar

A subsidiary of

Portfolio of the GHM Group

Laboratory Measurement

Handheld Instruments

Cond

uctiv

ity

Tem

pera

ture

Humid

ityPr

essu

re

pH /

ORPSe

nsor

s

Industrial Electronics

Displa

ys /

Cont

rolle

rIso

latin

g co

nver

ters

Mea

sure

men

t tra

nsm

itter

sSw

itchi

ng re

lays

Mon

itorin

g re

lays

Data

logg

er /

EASY

Bus

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

Test Bench Measurement CustomizingIndustrial Measurement

Flow

Tem

pera

ture

Pres

sure

Humid

ity

Leve

l

Filtr

atio

n

Process Engineering

Flow

Tem

pera

ture

Cond

uctiv

ity

Leve

l

pHPres

sure

S k i l l s i n M e a s u r e m e n t , C o n t r o l a n d P r o c e s s Te c h n o l o g y

NEW

A subsidiary of

Process measurement technology for hygienic areas

Process connections

Temperature (configurable via GTL programming tool)

Level measurement

Demands on the measuring technology

The basis of hygienic process control and therefore the demands on the measuring technology is essentially the fulfillment of the following

criteria:

� Hygienic Design for uncritical application� CIP- / SIP cleanable� Sensors made of stainless steel� FDA conform materials� EHEDG certification � 3A-approval� Protection class IP67 / IP69K

The process adaption demands choosing a hygienic process connection conforming to standards according to the desi-red application at tanks or in tubes. Diameter, volume and design define size and type of the connection, and medi-um, temperature and pressure state possible measuring principle. We offer hygienic easy-to-clean standard and special process connections for each measuring principle.

The temperature sensor series of the GHM group includes more than 30 different basic design types. The versatile probes cover a huge range of applications in food, bevera-ge and pharmaceutical industry.

Advantages

� Temperature range -40...+200 °C � Optional head transmitter� Fast response time due to reducing measuring tip� Several adapters and weld-in sleeves� Several evaluations electronics (ATEX, Profibus, SIL 2)� Pipe sensors for temperature monitoring of cleaning

and sterilization processes and for pasteurization and UHT

� Hydrostatic level measurement The level measurement is traced back to a measurement of

the hydrostatic pressure. This pressure is caused by the liquid column above the sensor and is directly proportional to the

filling level.

� Potentiometric level measurement (single rod probe)The level of free-flowing media is measured by a single rod probe.

Exploiting the electric induction the reference pole has been moved into the probe, thus no electric connection at the tank is necessary any

more.

Limit level measurement (configurable via GHMware)

Flow rate

Analysis measurement technology (configurable via GHMware)

� Capacitive DC measuring deviceThe DC measuring device provides measuring and monitoring of the dielectric constant (DC) of products. This allows monitoring of e.g. oil-water emulsion. A freely scalable current output is integrated for outputting the measuring value. The current status of the device and the measuring value can every time be read on the LC-display.

Applications� Media separation / monitoring of emulsions� Continuous process control / product quality monitoring via DC

� Capacitive measuring principleSeveral years of experience with different kinds of level sensors and limit level switches finally resulted in a new measuring principle. Striking advantages of this patented charge transfer measuring principle are the re-sponse time, setting of switching points to the digit and the possibility of phase varia-tion of media (e.g. milk and water).

� Calorimetric measuring principleThe limit level switch can detect liquids irrespective of conductivity or coloring. Ad-ditionally not too coarse granulate or mud-like products can be detected.

� Conductive measuring principleThis is a very cost-effective and flexible method for limit level detection. The sensor can be designed as single-rod as well as multi-rod probe. The sensor rods can subsequently be shortened or bent to fit them to the installation situation.

� Calorimetric flow rate measurementThe electronic flow rate monitoring based on the calorimetric principle has no mecha-nically moving parts (e.g. no turbine wheel or floating element). Therefore the sensor ca be used for media containing solids.Application: Monitoring and measuring of (even very low) flow rates, leakage control.

� Magnetic-inductive flow rate measurementThe magnetic-inductive principle uses the effect of conducting liquids inducing a voltage proportional to the flow velocity in a solenoid. Advantages of this measuring principle are that no moving parts are necessary and the pressure loss due to the mea-surement is low. Depending on the demands on design and tube standard the sensors are adaptable by several process connections.

Advantages� Compact design� Completely made of stainless steel� Operation without having to open

the housing� Graphic LCD, background illumination

� 14 diameters 3..100 mm� Variable process connection� Voltage supply 24 V DC� EHDGE + 3A approval

A subsidiary of

Brief overview: products with Ex

EU-Directive / CE mark

The explosion protection is regulated by directives and laws within the European Union. Electric devices have to fulfill corresponding regula-

tions in the EU. If the requirements are fulfilled, the manufacturer can label the device with the CE mark. In this context any misuse is an

offense.

According to directive 94/9/EG (ATEX directive) this marking is supplemented for the explosion protection of certain device classes – if needed – with the number of the notified body that performed the acceptance of the quality management.

In contrast to non-EU laws,the ATEX directive also applies to non-electric (e.g. pneumatic actuators). Corresponding sys-tems and facilities are classified “requiring inspection” and only devices approved for that purpose are allowed to be used. Furthermore start-up, changing and routine safety inspections have to be certified by state-approved insti-tutions or corporations. The legal framework are the EU directives, which are bindingly enacted for all EU member countries.

Explosions

Generally, there have to be three factors fulfilled, that a explosion can take place at atmospheric air:

• combustible• oxygen (air)• ignition source

Labeling according to directive 94/9/EGGeneral labeling according to EN 60079-0

II 2G Ex d IIC T6

Explosion- proof equipment

Explosion- proof equipment

Device group

Category Type of ignition protection

Explosion group

Temperature class

LabelingExample: Labeling of explosion-proof electric components according to directives 94/9/EG and EN 60079-0:

Industrial sensor and measuring technology

B1. Temperature

B2. Flow rate

B3. Level measurement

B6. Pressure

B7. Weighting technology

E3. Isolation amplifiers

E4. Safety and monitoring devices

GTF 101-ExGTF 102-ExGTF 103-ExTC293TR293TC296

A-V1A-V2A-V3A-H1.1A-H1.2A-H2.1A-U1-1

A-U1-2IL10

IS20IS21

PC22SB8RC3DMS50Ex

Industrial electronics

PMT50Ex-1

TV500Ex, ST500ExTV501ExTS500-Ex

MR50ExSTL50Ex

Laboratory and hand-held measuring devices

GMSD-exMSD-exGMH 3111-exGMH 3151-exGMH 3156-exGMH 3161 - ... - exGMH 3181 - ... - ex

E2. Transmitters

E1. DisplaysGIA 0420 N-exGIA 010 N-exGIA 0420..-exGIA 0420 WK..-exGIA 010 VO..-exGIA 010 WK..-ex

ATEX explosion protection

TR296MU500ExPMT50Ex-2/-3TG50ExSTL50Ex

silverline

A subsidiary of

The first products of GREISINGER electronic GmbH 30 years ago were premium special sensors, which hit the nerve of the market and founded the success of the com-pany.

Since then GREISINGER electronic GmbH has developed and manufactured its handheld instruments, transmit-ters, displays and corresponding sensors in Regenstauf, Bavaria (near Regensburg).

The use of state-of-the-art machinery and instrumen-tation, and the highly efficient and productive manu-facturing process are the the base of the high product quality "Made in Germany" at competitive prices.

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

Line 3000 Quality for ProfessionalsLine Line COMPACT Switch on and instantly Measure!

In the broad range of GREISINGER handheld instruments you will find the right device for every measurement task.

GREISINGER handheld instruments series Line 3000 are bus-capable, one- or multi-channel devices, have an interface and are optionally available as data logger. Handheld instruments series COMPACT Line can be used wherever fast and precise mea-sured values at economical prices play an important role.

• Temperature• Conductivity• pH / ORP• Pressure• Humidity• Material moisture• Flow• Oxygen• Carbon

monoxide

Handheld Instruments

Line 5000 Waterproof – Line 2000 for highest Demands

• pH / ORP• Temperature• Pressure• Conductivity

With modern design, Greisinger presents the newest handheld instruments with robust and waterproof housing and plug connections / probes.

According to model the handheld instru-ments have cyclic value memory with up to 10000 data set, manual or automatic logger function, an analog output and the large illuminated display.

i.e.: SL-pH

Measuring Sets

Each GHMsilverline set includes a com-plete measuring set � Water-proof handheld instrument� High-quality case� Flash drive with software and manual � USB adapter and cable with connection for analog output� ratis manufacturer's calibration after 1 year with automatic reminding from our calibration laboratory� Accessories like e.g. water-proof pH electrode and buffer solutions or water-proof temperature probe (depending on set type)

• pH / ORP (SL-pH)

• Temperatur (SL-Pt eco)

• Pressure (SL-P)

• Conductivity (SL-C)

A subsidiary of

Data Logger / EASYBus

SMSGSM

Displays / Controller

• Temperature• Humidity• Standard signal• Air pressure• Pulse• Status

- Dimensions 48 x 96 mm 24 x 48 mm

- Universal Inputs• Standard signal• Resistance• Frequency• Speed• Counter• Difference

- Relay switching outputs- Self diagnosis- Programmable characteristic- Transmitter power supply, isolated- Serial Interface- Min/Max value memory

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

Probes / Signal Converters

• Injection probe• Immersion probe• Surface probe• Air / gas probe• Asphalt probe• Clip-on probe

• Temperature• Humidity• Pressure• Conductivity• ORP• pH• O2• CO• CO2• Flow

Advantages of EASYBus

• Minimum amount of installation and planning• Display and monitoring system for several mea-

surement points• Unrivaled cost/performance ratio • High flexibility: Subsequent modifications and

extensions possible at any time

Applications of EASYBus

• Cooling chambers (temperature monitoring)• Heating / air conditioning / ventilation (tempera-

ture, relative humidity, CO2-monitoring)• Utility rooms / computer rooms / laboratories

(temperature, relative humidity)• Manufacturing rooms (temperature, relative hu-

midity, CO2)

A subsidiary of

For many years Honsberg has held a significant position in control and measurement technology for flow, level, temperature, pressure, and filtration instrumentation. Our activities cover research and development, manu-facturing, sales, and service.

- Honsberg was founded in 1963 as family-owned enterprise. - Honsberg is a medium-sized company with its production facility in Remscheid.- Honsberg products are installed in waste water treatment, diesel engines, compressors, construction machines, as well as in machine tools, paper, printing or refrigerating machines.

Filtration

Level

Pressure

Temperature

Inspection glasses for vertical mounting in various lengths to monitor fluid levels and visual appearance.

Float gauges for vertical mounting in various lengths and de-signs monitoring fill levels with one or more switch-points.

Float gauges for horizontal mounting monitoring fill levels with one contact or with capacitive measures. Ultrasonic method for granules and ductile materials avoiding direct contact.

Bi-metal monitor for temperature control in strong design. External adjustable temperature switch. Platinum tem-perature meter with high accuracy. Can be combined with transmitters FLEX-T (switch, analog, or frequency output) or OMNI-T (switch, analog, or frequency output and LED display).

Differential temperature meter consisting of two platinum probes and 4..20 mA signal output. Infrared sensor for contactless measuring and monitoring of temperatures (OMNI-IR).

Membrane pressure monitor with settable switching point in stainless steel or brass housing. Pressure meter with thick-film sensor and protected pressure cell, current output 4..20 mA. Stainless steel meter with flush mount membrane in 2-wire technology for combination with transmitters FLEX-P (switch, analog, or frequency output) or OMNI-P (switch, analog, or frequency output with LED display).

Ceramic pressure cell in stainless steel housing in 2-wire tech-nology, to be combined with transmitters FLEX-P (switch, analog, or frequency output) or OMNI-P (switch, analog, or frequency output with LED display).

All pressure sensors are available also with wireless transmit-ter.

Magnetic filter with microstrainer and magnet plug in solid construction, micro mesh 5..300 µm with clear-sight lid.

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

A subsidiary of

Flow

Indication Switching• Displays to be combined with many devices• Mechanical scales (do not need power supply)• Electronic displays with back lighting

• Reed switch• Micro switch• Hall-effect switch

• Piston valve design• Piston in line design• Float

• Paddle• Dynamic flap

• Gear wheel• Bolt

Measuring

Add-on systems with switches, transmitters, mechanical scales and electronic displays.

• With transmitter• Programmable switch-points• Analog output: current, voltage, and/or frequency

• Vortex• Sight glass

• Calorimetric• Magnetic-Inductive

• Flap• Sphere

• Flow limiter

A subsidiary of

Martens Elektronik GmbH, founded in 1988, has more than 20 years experience in the field of measuring, control, and process measurement. Our motto is "Made in Germany" with development and production in Barsbüttel near Hamburg.

The product portfolio consists of digital displays, signal converters, sensors, and analysis devices. Nearly every physical or electrical quantity can be measured.

We build customer-specific devices for special require-ments beyond the standard.

The vast range of products and measured quantities is reflected by our customer base, spanning from build-ing automation via plant engineering to the pharma-ceutical industry.

Process and Analysis Measurement

We offer technologies for level metering depending on applications and specifica-tions, from sensors for hydrostatic pressure to capacitive sensors for viscous or adhesive media..

• Capacitive level measurement

• Hydrostatic level measurement

Level

All commercial flow sensors can be connected to our field meters and sig-nal converters for flow and frequency measurement. Values are displayed visually or converted into a standard signal.

Flow

• Interpretation of standard flow sensors

Measurement with conductive 2- and 4-pole sensors is commonly used. The vari-ety of plugs allows measuring under nearly all conditions from water to aggressive acids.

• Conductive• Measurement of

all ranges down to ultrapure water

Conductivity

Measuring one of the most important pro-cess quantities is a piece of cake with our converters and displays. Tasks like connect-ing, configuring, as well as calibration are intuitional matters.

pH / ORP

• Measurement with standard electrodes

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

SIL 2

A subsidiary of

Industrial Electronics

Industrial Electronics

Displays and Fieldmeters

Visualization is the most important factor mon-itoring and displaying processes and applica-tion flows for the user.

Our range of displays for front panel or direct mounting offers solutions for nearly all mea-surement quantities and physical units.

A common feature of the displays is easy configuration via front panel buttons or DIP switches plus manifold options with relay and analog outputs.

Use under harsh conditions is feasible due to environmental class IP65. If you have not found the appropriate display for your application yet, please do not hesitate to ask for a custom-er-specific solution.

Signals from Pt100, thermocouples, strain gauges, or resistors cannot always be pro-cessed directly. Otherwise the signal follows a function needing processing as a linearized standard signal.

For these and other signals and applications we offer transmitters with DIN-Rail mounting. Housings are 22.5 or 50 mm wide depending on the application. Configuration can be done with DIP switches, Teach-In, or via keypad and display.

In most cases the transmitter can be enhanced with alarm contacts for a safe shutdown in case of emergency.

Transmitters

• Rotation• Pressure• Flow• Cycle time• Conductivity• Counter• pH value• Productivity• Temperature• Level• Standard signals

• Signal conditioning• Linearization• Characteristics

transformation• Voltage• Current• Temperature• Resistance• Frequency• Power

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

Industrial Electronics

Industrial Electronics

Independent of the size of an installation, many failures and problems relate back to noisy sig-nals or electrical potential mismatch.

The solution is the galvanic isolation of the sig-nal. Our isolating converters are available as ac-tive or passive version with 1, 2, or 3 channels for DIN-Rail mounting.

With a universal design nearly all devices only isolate signals, but also convert signals e.g. from 4..20 mA to 0..10 V.

Our switching and monitoring devices ensure the safe operation of an installation. Starting with a simple threshold switch, the product range also covers isolation guards and safety temperature limiters with SIL2 class according to actual DIN EN 14597 standard.

Monitoring is also essential for the Ex area. Many of our devices allow connection of sig-nals from this zone.

The devices are freely configurable or program-mable with a free choice of functionality.

Isolating Converters

Switching and Monitoring Devices

• Galvanic isolation• Power feed isolation• Switching repeater

isolation• Transmitter isolation

• Threshold switch• Isolation guard• Power monitoring• Emergency relay• Safety temperature

limiter

A subsidiary of

IMTRON Messtechnik GmbH was founded April 1984 as an engineering office by Werner Heinrich. Since then it became a recognized supplier of measurement compo-nents and systems for industrial applications in develop-ment, manufacturing, and testing.

Our products are widely used by companies like ABB, Astrium, Daimler, ESA, Schaeffler Group, Tognum, VW Group, ZF, and many more. Applications are in the processing and acquisition of physical parameters like pressure, temperature, distance, angle, current, voltage, torque, etc.

Hardware and software is used in stationary automo-tive and machine manufacturing test beds, for energy monitoring in wind and solar parks, as well as mobile for car, truck and aircraft testing.

The most universal system for indus-trial data acquisition.

With 1 DSP per channel, the amplifiers of the proven DASIM measurement system offer an outstanding perfor-mance with minimum space require-ments.

The 2-channel Universal amplifier is designed for a vast number of sen-sors.

Each of the 2 amplifier channels can be set independently and without com-promise to any foreseen sensor by our parameter setting software DaSoft.

Sensor parameters can be also directly imported out of a sensor data base.

Each measurement channel is isolated and provides adequate power supply for the different types of sensors.

The sample rate per channel is 20 or 40 kS/s. All channels are synchronous.

There are 2 precise analog output sig-nals available per channel. In parallel the digitised signals from the inter-nal high-speed bus are output via an Ethernet and CAN interface.

Measurement data are buffered in a FIFO. Parameter setting is done via the Ethernet or an RS232 interface.

Signal Conditioning and Data Acquisition Systems

• Extremely Universal• Isolated Inputs• 1 DSP per Channel• 2 Channels per Amplifier• 40 kHz Sample Rate• Ethernet, CAN• Analog Outputs• GPS, Video Connection• Parameter setting

software DaSoft• Acquisition software

DAQSoft• Drivers for DASYLab,

LabVIEW, DIAdem

DASIM

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

A subsidiary of

SIQUAD

ISO - Modules

Particularly Cost-Effective

High-end universal and modular computer con-trolled data acquisition system.

4-channel universal SIQUAD amplifier for a huge number of sensors. 24 bit AD conversion and up to 20 kS/s sample rate.

The modular amplifiers are designed for strain gauge, DC signals, temperature, ICP©, and fre-quency sensors. Units for analog out and Digi-tal-IO are also available.

Isolated inputs, analog and digital signal out-put. Ethernet and CAN interface.

All channels are synchronous.

Isolated and with Filters

DIN-Rail modules for isolated noiseless signal conversion, conditioning and combining.

Inputs for norm signals as well as strain gauge bridges, DC signals, potentiometers, tempera-ture, ICP© sensors, pulse generators. Outputs as norm signals for current and voltage.

Plug-in filter modules 4th (8th) order for interfer-ence suppression.

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

SIQUAD Compact / Mini

Calibration and Testing

Universal, Stand-alone and Compact Size

Individual universal and modular amplifiers with 1, 2, 4, 6, and 16 channels for stand-alone data acquisition. Isolated inputs. Digital signal output via CAN.

Various types of chassis.

Decentral and Stand-alone

Individual modular amplifiers in a miniature sys-tem for decentralised data acquisition. Digital signal output via Ethernet and CAN interface.

Various types of chassis.

Calibration devices for strain gauge amplifiers with manual or IEEE488 operation.

Bridge resistances 120, 350, and 1000 Ohms. Sensitivities from 0.1 to 50 resp. 250 mV/V in 10 resp. 20 steps. Accuracy ± 0.02 %.

Test standard for physically correct simulation of strain gauge bridges, potentiometers, ther-mocouples, RTDs, current, voltage, and tachom-eter generators.

The microprocessor used allows direct entry of sensor values as physical quantities. Calibration and nominal values are accounted for as well.

1

2

3

4

5

6

78

9

10

Peter TaubertStralsunder Straße 149

04349 Leipzig

+49 (0) 3 42 98 / 48 95 53 +49 (0) 3 42 98 / 48 95 54 M +49 (0) 171 / 3 37 74 75 p.taubert@ghm-messtechnik.de

Jürgen KerstenKamperlingsweg 947906 Kempen

+49 (0) 21 52 / 20 42 75 +49 (0) 21 52 / 89 56 59M +49 (0) 172 / 5 29 85 87 j.kersten@ghm-messtechnik.de

Hans-Joachim PetermannKrögerstraße 3022145 Hamburg

+49 (0) 40 / 67 99 84 10 +49 (0) 40 / 67 99 84 11M +49 (0) 172 / 4 34 68 81 h.petermann@ghm-messtechnik.de

Thomas StumpeHarster Chaussee 20

19243 Wölzow

+49 (0) 3 88 52 / 23 32 24 +49 (0) 3 88 52 / 23 32 25M +49 (0) 172 / 4 34 68 80

t.stumpe@ghm-messtechnik.de

Michael WulfStralsunder Straße 4

23879 Mölln

+49 (0) 45 42 / 9 06 45 71 +49 (0) 45 42 / 9 06 45 72 M +49 (0) 172 / 4 34 68 82 m.wulf@ghm-messtechnik.de

Joachim HöflingKleinhaslach 80

90599 Dietenhofen

+49 (0) 98 24 / 92 86 82 +49 (0) 98 24 / 92 86 81M +49 (0) 172 / 8 46 05 12

j.hoefling@ghm-messtechnik.de

Michael UhlenbrockRoeberstraße 242117 Wuppertal

+49 (0) 202 / 609 41 72 +49 (0) 202 / 709 26 40M +49 (0) 171 / 410 81 73 m.uhlenbrock@ghm-messtechnik.de

Jürgen KerstenKamperlingsweg 947906 Kempen

+49 (0) 21 52 / 20 42 75 +49 (0) 21 52 / 89 56 59M +49 (0) 172 / 5 29 85 87 j.kersten@ghm-messtechnik.de

GHM Maaleteknik ApSMaarslet Byvej 28320 MaarsletDenmark

+45 64 64 92 - 00 +45 64 64 92 - 01 www.ghm.dk info@ghm.dk

GHM-Meettechniek BVZeeltweg 303755 KA EemnesNetherlands

+31 (0) 35 / 5 38 05 - 40 +31 (0) 35 / 5 38 05 - 41 www.ghm-nl.com info@ghm-nl.com

GHM-Greisinger s.r.o.Ovci hajek 2 / 2153158 00 PRAGUE 5 Nove ButoviceCzech Republic

+420 251 613 828 +420 251 612 607 www.greisinger.cz info@greisinger.cz

A subsidiary of

Our German Sales Team

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

Sales Area 1: 20000 - 20449 20459 - 21040 21451 - 21480 21509 - 2151322000 - 2299924000 - 2599927000 - 2772927778 - 2779328000 - 28999

Sales Area 3:40000 - 4199945000 - 5099952000 - 52999

Sales Area 5:30000 - 34999 37000 - 39999

Sales Area 4:35000 - 3699942000 - 42999 44000 - 4499951000 - 51999 53000 - 5399957000 - 59999 61000 - 61999

Sales Area 6:00000 - 09999 98000 - 99999

Sales Area 9:70000 - 79999

Sales Area 7:54000 - 5699960000 - 6099964000 - 69999

Sales Area 2:10000 - 19999 20450 - 20458 21041 - 21450 21481 - 2150821514 - 2199923000 - 2399926000 - 2699927730 - 2777727794 - 2799929000 - 29999

Sales Area 10:80000 - 89999

Erling Mathiesen Director

Denmark

Occo AndriessenDirector

Netherlands

Michal Doubek und Lubos RousekDirector

Czech Republic / Slovakia

Sales Subsidiary

Sales Area 8:63000 - 63999 90000 - 97999

A subsidiary of

Sales Europe

Belgium

Denmark

Finland

Estonia

France

Greece

Great Britain

Croatia

Italy

Poland

Portugal

Netherlands

Austria

Norway

Rumania

Russia

Czech Republic

Turkey

Ukraine

Sweden

Switzerland

Spain

Belarus

Hungary

Ireland

Sweden

Switzerland

Serbia

Slovakia

SloweniaTEMPCO SA4ém Avenue, 114Parc Industriel des Hauts-Sarts4040 HerstalBelgiumE-Mail: tempco@tempco.beWeb: www.tempco.be

AMRA BVBAKlein Heiken 62950 KapellenBelgiumE-Mail: sales@amra.beWeb: www.amra.be

GHM Maaleteknik ApSMaarslet Byvej 28320 MaarsletDenmarkE-Mail: info@ghm.dkWeb: www.ghm.dk

OEM Automatic ABDalagatan 457328 TranasSchwedenMr. Henrik SjölinE-Mail: henrik.sjolin@aut.oem.seWeb: www.oemautomatic.se

Fahrer AGAlte Winterthurerstrasse 38309 NürensdorfSchweizHerr Roger StrasserE-Mail: roger.strasser@fahrer.chWeb: www.fahrer.ch

JØRN PEDERSEN A/Småle-& reguleringsteknikBogøvej 18DK-8382 HinnerupDenmarkE-Mail: info@jp-industri.dkWeb: www.jp-industri.dk

Diestro Services LTDInniscarra Co. Cork,IrelandMr. Sean ThompsonEmail: seanthompson@diestro-services.ieWeb: www.diestro-services.ie

Flowcon technology LtdLisboy houseBlackrock RoadCorkMr. Anthony O'KeeffeEmail: Aok@flowcon.ieWeb: www.flowcon.ie

Kübler Suomi OyControl EngineeringKelatie 25 A 1-301450 VantaaFinlandE-Mail: kubler@kubler.fiWeb: www.kubler.fi

OEM Finland OYFiskarsinkatu 320750 TurkuFinlandE-Mail: info@fi.oem.seWeb: www.oem.fi

STANDEL ASKiisa 811313 Tallinn, EstoniaEstoniaE-Mail: urmas.sarv@standel.eeWeb: www.standel.ee

Labochema LTVilkpedes st. 22Vilnius, LT-03151Lietuva/LithuaniaE-Mail: labochema@labochema.ltWeb: www.labochema.lt

OEM Automatic Klitsoe A/SEngholm Parkvej 43450 AlleroedDenmarkE-Mail: info@oemklitso.dkWeb: www.oemklitso.dk

Honsberg Instruments GmbHBureau de ServiceBâtiment UPRAMarmilhat63370 LempdesFranceE-Mail: honsberg@orange.frWeb: www.honsberg.com

ZACH METALCHEM Sp. z o.o.ul.Chorzowska 44c44-101 GliwicePolandE-Mail: biuro@metalchem.plWeb: www.metalchem.pl

BHB Sistemasde Controlo e Medida LdaLargo Joao Vaz, n°. 111700-249 LisboaPortugalE-Mail: geral@bhb.ptWeb: www.bhb.pt

HENNLICH Industrietechnik, s r. o.Ceskolipska 941201 LitomericeCzech RepublicE-Mail: meres@hennlich.czWeb: www.hennlich.cz

GHM-Greisinger s.r.o.Ovci hajek 2 / 2153CZ158 00 PRAGUE 5 - Nove ButoviceCzech RepublicE-Mail: info@greisinger.czWeb: www.greisinger.cz

SMS-TORK SANAYI MALZEMELERI ÜRETIM VE SATISI A.Ş.Bostanci Yolu Kuru Sokak, 1634776 - Y. Dudullu/UmraniyeIstanbulTurkeyE-Mail: tork@sms-tork.com.trWeb: www.sms-tork.com.tr

GHM-Meettechniek BVZeeltweg 303755 KA EemnesNetherlandsE-Mail: info@ghm-nl.comWeb: www.ghm-nl.com

MegaSensor GmbHPavel BazanovIm Weidenbruch 22751061 KölnGermanyE-Mail: info@megasensor.comWeb: www.megasensor.com

AKV Industrie Automatik OHGErich-Mueller-Str. 2440597 DüsseldorfGermanyE-Mail: akv-ia@gmx.de

OEM AUTOMATIC ABDalagatan 457328 TranasSwedenE-Mail: info@aut.oem.seWeb: www.oemautomatic.se

Svenska Termoinstrument ABAdress. Box 1421SE-183 14, TäbySweden E-Mail: info@sttermo.seWeb: www.svenskatermoinstrument.se

EHS Elektrotechnik AGIndustriestrasse 26CH-8604 VolketswilSwitzerlandE-Mail: info@ehs.chWeb: www.ehs.ch

Fahrer AGAlte Winterthurerstr. 338309 NürensdorfSwitzerlandE-Mail: info@fahrer.chWeb: www.fahrer.ch

Rolf Muri AGMess-und RegeltechnikCH-8812 HorgenSwitzerland E-Mail: info@rolfmuri.chWeb: www.rolfmuri.ch

Hennlich GmbH & Co. KGAlfred-Kubin-Straße 9 a-c4780 SchärdingAustriaE-Mail: office@hennlich.atWeb: www.hennlich.at

PMR HandelsgmbHSt. Peter Hauptstrasse 508042 GrazAustriaE-Mail: office@pmr.atWeb: www.pmr.at

MEDONIng. Christian HalperGreiner 3767534 OlbendorfAustriaE-Mail: office@medon.atWeb: www.medon.at

OEM Automatic ASBjornstjerne Bjornsonsgate 1103044 DrammenNorwayE-Mail: post@oem.noWeb: www.oem.no

FAUST Y KAMMANN, S.L.Provenza, 382-38608025 BarcelonaSpainE-Mail: fyk@fyk.esWeb: www.faustykammann.com

ELION S.A.Farell, 508014 BarcelonaSpain E-Mail: elion@elion.esWeb: www.elion.es

SENSOTEC INSTRUMENTS, SA C.Albert Einstein, 54, nave 16 08940 - Cornellà de Llobregat Barcelona - Spain E-Mail: sensotec@sensotec-instruments.com Web: www.sensotec-instruments.com

MegaSensor GmbHPavel BazanovIm Weidenbruch 22751061 KölnGermanyE-Mail: info@megasensor.comWeb: www.megasensor.com

Inczédy & InczédyKatona Lajos utca 1/b2600 Vác, Pf. 49HungariaE-Mail: vac@inczedy.comWeb: www.inczedy.eu

HENNLICH IPARTECHNIKA KFTHelioport – Reptér6000 Kecskemét-KadafalvaHungaryE-Mail: merestech@hennlich.huWeb: www.hennlich.com

OEM Automatic Kft.H-2040 BudaörsGyár u.2.Post adress:H-2058 BudaörsP.O. BOX: 111E-Mail: info@oemautomatic.huWeb: www.oemautomatic.hu

SYSCOM 18 srlCalea Plevnei 139 B060011 BucharestRomaniaE-Mail: office@syscom18.comWeb: www.syscom.ro

Inczédy & Inczédy Kft.Katona Lajos utca 1/b2600 Vác, Pf. 49HungariaE-Mail: vac@inczedy.comWeb: www.inczedy.com

Hennlich DOO Beogradul. Svetozara Markovica 3/411400 MladenovacSerbiaE-Mail: office@hennlich.co.yuWeb: www.hennlich.co.yu

Inczédy & Inczédy Kft.Katona Lajos utca 1/b2600 Vác, Pf. 49HungariaE-Mail: vac@inczedy.comWeb: www.inczedy.com

GHM-Greisinger s.r.o.Ovci hajek 2 / 2153CZ158 00 PRAGUE 5 - Nove ButoviceCzech RepublicE-Mail: info@greisinger.czWeb: www.greisinger.cz

HENNLICH Industrietechnik, s r. o.Kosicka 5282108 BratislavaSlovakiaE-Mail: technik@hennlich.skWeb: www.hennlich.sk

Inczédy & Inczédy Kft.Katona Lajos utca 1/b2600 Vác, Pf. 49HungariaE-Mail: sturovo@inczedy.comWeb: www.inczedy.com

HENNLICH d.o.o.Podnart 334244 PodnartSloveniaE-Mail: info@hennlich.siWeb: www.hennlich.si

TXP Advisers srlStr. Radovanu Nr. 12. Bl. 38Sc 3, Et 5, Ap. 79, Sector 2022887 BucharestRomaniaE-Mail: vasile.enache@txp.roWeb: www.txp.ro

MegaSensor GmbHPavel BazanovIm Weidenbruch 22751061 KölnGermanyE-Mail: info@megasensor.comWeb: www.megasensor.com

Europribor Ltd Group109518, Moscow1-y Grayvoronovsky pr. 20, str.36E-Mail: euro-pribor@yandex.ruWeb: www.europribor.ru

UTECO ABEE5, Mavrogenous Str.18542 PiraeusGreeceE-Mail: uteco@uteco.grWeb: www.uteco.gr

DEKA S.A.Aristidou 21185 31 PireasGreeceE-Mail: deka@otenet.grWeb: www.deka.gr

OEM AUTOMATIC Ltd.WhiteacresCambridge RoadWhetstoneLeicestershire LE8 6ZGGreat BritainE-Mail: information@uk.oem.seWeb: www.oem.co.uk

PVLPressure Vacuum Level Ltd.Unit 9, Lexden Lodge Ind. EstateJarvis Brook, CrowboroughEast Sussex, TN6 2NQGreat BritainE-Mail: info@pvl.co.ukWeb: www.pvl.co.uk

Aquaculture FrancePA Le Monteno56190 La Trinité SurzurFranceE-Mail: contact@aquaculture-france.frWeb: www.aquaculture-france.fr

Euro Air InstrumentsZA Sainte Croix1, Rue des Tisserands35410 ChateaugironFranceE-Mail: euro-air-instruments@orange.frWeb: www.euro-air-instruments.fr

HENNLICH Industrijska tehnika d.o.o.Franje Wölfla 410000 ZagrebCroatiaE-Mail: hennlich@hennlich.hrWeb: www.hennlich.hr

VAL.CO s.r.l.Via Rovereto, 9/1120014 S.Ilario di Nerviano (MI)ItalyE-Mail: valco@valco.itWeb: www.valco.it

Danetech srlVia Capecelatro, 1220148 MilanoE-Mail: info@danetech.itWeb: www.danetech.it

I

A subsidiary of

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

Sales Worldwide

Australia

Brazil

Peoples Republic of China

Egypt

South Africa

Japan

Malaysia

Singapore

Israel

New Zealand

Oman

South Korea

India

USA

Vietnam

U.A.E.

Ukraine

Thailand

Taiwan

Information media of GHM Messtechnik

Industrial sensor and measuring technology

B

Process technology “Hygienic Designed”

Laboratory measurement

CD

Industrial electronics

Data logging

EF

Overview of brochures

Product information ring binder

Measuring technology in food, beverage and pharmaceutical industry Brochure for food industry applications

ATEX explosion protection, certainly safe.Brochure for applications in explosive areas

GHM-Messtechnik on the web Learn about our products on www.ghm-messtechnik.de

ERDCO Engineering Corporation721 Custer AvenueEvanston, IL 60202 USAE-Mail: info@erdco.comWeb: www.erdco.com

MCI Measurement and Control Instruments8001 Irvine Center Drive, Suite 1250, Irvine, CA 92618USAMr. Tom SanderE-Mail: tsander@mcinstruments.comWeb: www.MCInstruments.com

INSTEC, JSC11A, Ngo 282, Duong Khuong Dinh,Thanh Xuan HanoiVietnamE-Mail: info@instec.vnWeb: www.instec.vn

I

Menco Global FZCPO Box: 9375SAIF ZoneSharjahUnited Arab Emirates (UAE)E-Mail: pumenon@mencoglobal.comWeb: www.mencoglobal.com

MegaSensor GmbHPavel BazanovIm Weidenbruch 22751061 KölnGermanyE-Mail: info@megasensor.comWeb: www.megasensor.com

AKV Industrie Automatik OHGErich-Mueller-Str. 2440597 DüsseldorfGermanyE-Mail: akv-ia@gmx.de

Compomax Company Ltd.16 Soi Ekamai 4Sukhumvit 63 Rd.Prakanongnue, VadhanaBangkok 10110ThailandE-Mail: info@compomax.co.thWeb: www.compomax.co.th

Yuden Electric Co., Ltd.5F., NO.121, Lide St., Jhonghe CityTaipei County 235Taiwan (R.O.C.)E-Mail: trade@yuden.com.twWeb: www.yuden.com.tw

Pipeline Dynamics Pty Ltd.18 Thomas StreetAirort West, Vic 3042AustraliaE-Mail: peterm@pipelinedynamics.com.auWeb: www.pipelinedynamics.com.au

Practical Control Solutions Pty LtdPO Box 1052 Mount Waverley Delivery CentreMount Waverley, Victoria, 3149AustraliaE-Mail: sales@practicalcontrol.com.au Web: www.practicalcontrol.com.au

Protec Technology For Industry Co.Cairo - Almukatum - South CHoda Sha´rawy St. - section 9253ÄgyptenE-Mail: m.refai@protec-eg.comWeb: www.protec-eg.com

IZDA Equipamentos para AutomatizacaoIndustrial Ltda.Rua Dr. Humberto Pinheiro Vieira, 14189.219-570 – City Joinville SCBrasiliaE-Mail: lothar@izda.com.brWeb: www.izda.com.br

Silkroad24Office in ShanghaiSheng Li Road No. 836Plaza 4 Building A Flat 201-501Shanghai Pudong 201201P.R. ChinaE-Mail: info@silkroad24.deWeb: www.silkroad24.com

Shanghai Longineer Electronic Tech & Dev Co; Ltd.Room 12 – C , RENHENG PLAZA, NO.96 Maoxing Rd. Shanghai 200127Shanghai 200127P.R. ChinaE-Mail: ophir@longineer.comWeb: www.longineer.com

Silkroad24 GmbHOffice in BraunschweigWeststr. 638126 BraunschweigGermanyE-Mail: sxm@silkroad24.deWeb: www.silkroad24.com

HONG KONG Star View Co., LimitedRm304C, Join-in Hang Sang Centre,2-16 Kwai Fung Crescent,Kwai Chung,Kowloon,Hong KongWeb: www.shidawei.com

Guangzhou Zeer Electro-Mechanical Science and Technology Co.LtdRoom 1308, BaiNaoHui Science&technology, Building B,TianHe Road 594, Guangzhou, P.C.: 510635P.R. ChinaE-Mail: gzzeer@gmail.comWeb: www.zeer.com.cn

OMSA VALVES AND INSTRUMENTATION PROPRIETARY Ltd.P.O. Box 1298Randburg 2125South AfricaE-Mail: instrumentation@omsa.co.zaWeb: www.omsa.co.za

AMS HADENBuilding 5Bergzicht Office ParkC/O Christiaan De Wet & Rooibok AveAllen‘s Nek, 1737South AfricaE-Mail: instruments@amshaden.co.zaWeb: www.amshaden.co.za

Evanet (Pty) LtdP.O. Box 1505Rivonia 2128South AfricaE-Mail: evanet (at) evanet.co.zaWeb: www.evanet.co.za

HITECH LIMITEDShimouma 1-35-2, Setagaya154-0002 TokyoJapanE-Mail: hitech@sepia.ocn.ne.jpFon +81 3-5430-2301Fax +81 3-5430-2302

Jaytron Automation (KL) Sdn. Bhd. Block G-1-3, Kuchai Business ParkNo 2, Jalan 1/127, Off Jalan Kuchai Lama58200 Kuala LumpurMalaysiaE-Mail: enquiries_kl@jaytronautomation.comWeb: www.jaytronautomation.com

Four Star EnterprisesPatrick Lim37, Kallang Pudding Road No. 09-01Blk B Tong Lee BuildingSingapore 349315SingaporeE-Mail: info@fse.com.sgWeb: www.fse.com.sg

OptoCom Equiptech (M) Sdn Bhd.H49-2, Jalan 5, Cosmoplex Industrial ParkBandar Baru Salak Tinggi, Sepang43900 SelangorMalaysiaE-Mail: optocom@tm.net.myWeb: optocom.com.my

UILUnited Instruments Ltd,27, Hamaa‘pilim Blvd.P.O.Box 36773Tel-Aviv 61367IsraelE-Mail: unitedin@netvision.net.ilWeb: www.united.co.il

Hach Pacific NZP.O. Box 1299216 Botha RdPenrose, AucklandNew ZealandE-Mail: nzsales@hach.comWeb: www.accurate.co.nz

Menco Global FZCPO Box: 9375SAIF ZoneSharjahUnited Arab Emirates (UAE)E-Mail: pumenon@mencoglobal.comWeb: www.mencoglobal.com

HANMO CORPORATIONRM1115 Kolon Digital Tower 222-7Kuro-3Dong, 152-848 SeoulRepublic of KoreaE-Mail: dovejung@yahoo.co.krWeb: www.hanmo.co.kr

Sane Calibration Instruments Co., Ltd.Rm 911 Hyundai Tower, 7-28Sincheon-dong, songpa-guSeoul 138-735KoreaE-Mail: sanecal@sanecal.comWeb: www.sanecal.com

Switzer Instrument Ltd.29 Thanikachalam RoadMadras 600017IndiaE-Mail: info@switzerinstrument.comWeb: www.switzerinstrument.com

Lincoln Helios (India) Ltd.Shivaprasad Complex114, M.G. RoadBangalore 560001IndiaE-Mail: ss@lincoln.global.net.inWeb: www.lincolnindia.com

Trinity Interface Systems Pvt. Ltd.Arenja Plaza, Plot No. 52Sector 15, CBD BelapurNavi Mumbai - 400614IndiaE-Mail: enquiries@trinity.inWeb: www.trinityautomation.co.in

PMA Controls India Ltd.Plot No 110 & 111 Burma Colony,Off OMR, Perungudi 6000 020 Madras ChennaiIndiaE-Mail: info@pmacontrols.inWeb: www.pmacontrols.in

SHENZHEN Star View Industrial Co., LtdFlat F, 7/F, BLK 1, GreenfieldsRM 609 Aihua Bld 2038 Shennan Middle Rd. Shenzhen, P.R.China E-Mail: liuyan@shidawei.comWeb: www.shidawei.com

I

ZEECOMIn c.Joyoon Bldg. 2F , #441 -27Songjook-dongJ,a ngan-gu440-802S uwon,G yeonggPi rovince/South KoreaE-Mail: sales@zeecomkorea.comWeb: www.zeecomkorea.com

GREISINGER electronic GmbHHans-Sachs-Straße 2693128 RegenstaufGermany +49 (0) 94 02 / 93 83 - 0 +49 (0) 94 02 / 93 83 - 33www.greisinger.deinfo@greisinger.de

Honsberg Instruments GmbHTenter Weg 2-842897 RemscheidGermany +49 (0) 21 91 / 96 72 - 0 +49 (0) 21 91 / 96 72 - 40www.honsberg.cominfo@honsberg.com

IMTRON Messtechnik GmbHCarl-Benz-Straße 1188696 OwingenGermany +49 (0) 75 51 / 92 90 - 0 +49 (0) 75 51 / 92 90 - 90www.imtrongmbh.deinfo@imtrongmbh.de

Martens Elektronik GmbHKiebitzhörn 1822885 BarsbüttelGermany +49 (0) 40 / 6 70 73 - 0 +49 (0) 40 / 6 70 73 - 288www.martens-elektronik.deinfo@martens-elektronik.de

GHM-Greisinger s.r.o.Ovci hajek 2 / 2153158 00 Prague 5 Nove ButoviceCzech Republic +420 251 613 828 +420 251 612 607www.greisinger.czinfo@greisinger.cz

GHM-Meettechniek BVZeeltweg 303755 KA EemnesNetherlands +31 (0) 35 / 5 38 05 - 40 +31 (0) 35 / 5 38 05 - 41www.ghm-nl.cominfo@ghm-nl.com

GHM Maaleteknik ApSMaarslet Byvej 28320 MaarsletDenmark +45 64 64 92 - 00 +45 64 64 92 - 01www.ghm.dkinfo@ghm.dk

Competence Center Sales subsidiary

05/2

013GHM Messtechnik GmbH

Hans-Sachs-Straße 2693128 RegenstaufGermany

+49 (0) 94 02 / 93 83 - 0 +49 (0) 94 02 / 93 83 - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de

. . . p r o f e s s i o n a l I n s t r u m e n t s " M a d e i n G e r m a n y "

GREISINGERe l ec t ron i c