Sauer_H1-Pump90-2.pdf

7/28/2019 Sauer_H1-Pump90-2.pdf

1/2

DataSh

eet

11055369 Rev AC May 2009

Local Address:

Features

Designed or quality and reliability

One design concept

Single piece swash plate

Installation and packaging benefts

Length optimized pump

Minimum one clean sideHigher corner power

Higher package size ratio

Standardized connector interface

Expanded functionality through PLUS+1

Optimized or electrical control

Electro-hydraulic control options include

Electrical Displacement Control (EDC)

Forward-Neutral-Reverse (FNR) and

Non-Feedback Proportional Electric (NFPE)

Common control across entire family

Expanded unctionality

PLUS+1 Compliant control and sensor options

Integral filtration available with integrated filter bypass

sensors and switch

Greater total effi ciency

Minimized control losses

Improved charge circuit

Lower control pressure for less power consumption

Introduction

For more than 40 years,

Sauer-Danfoss has been

developing state-of-the-art

components and systems for

mobile machinery used in

off-highway operations around the

world. We have become a preferred

supplier by offering the best of

what really matters: The hardware

inside your vehicle application.

H1 - our new generation of servo-

controlled hydrostatic pumps - is

no exception.

The H1 range is built around

an advanced electrical control

and available in a wide range

of displacements. It is designed

for quality and reliability and

offers expanded functionality,

greater total effi ciency, and easy

installation.

All H1 control and sensor options

are PLUS+1 Compliant.

PLUS+1 allows you to rapidly

develop and customize electronic

machine control. It opens up the

future by combining machine

controls and diagnostics in an

integrated operating network.

H1-The new

Generation of

Hydrostatics

089/100 cm3

Single Pumps

H1 Axial piston pump

Size 089/100 single pump

7/28/2019 Sauer_H1-Pump90-2.pdf

2/2

11055369 Rev AC May 2009 Copyright 2009, Sauer-Danfoss. All rights reserved. Contents subject to change.

All trademarks in this material are properties of their respective owners.

Technical Specifcations

H1-The new Generation of Hydrostatics

089/100 cm3Displacement Single Pumps

Schematic

System port B

25.4 - 250 barSplit flange bossper ISO 6162M12x1.7520 [0.79] minfull thread depth

System port A

25.4 - 250 barSplit flange bossper ISO 6162M12x1.7520 [0.79] minfull thread depth

Connector:

Deutsch DT04-2P to be paint free

12.45 0.25[0.49 0.01]

99.0

1.0

[3.8

98

0.0

39]

139.176 1.0[5.479 0.039]

112.39 1.0[4.425 0.039]

187.2

9

1.0

[7.3

74

0.0

39]

295.33 2.0[11.627 0.079]

Servo gage port M4

Port ISO 11926-1 7/16-2021 max. clearancedia for fitting

Charge inlet port S

Port ISO 11926-1

15

/8

-1269 max. clearance diafor fitting

Case drain port L4

Port ISO 11926-1 1 1/16-1248 max. clearance dia for fitting

127.0

-0.0

5

[5.0

-0.0

02

]

4x14.34 + 0.3

0.1

[0.565 + 0.12-0.004 ]

4x57.2

5

0.2

5

[2.2

54

0.0

1]

4x 57.25 0.25[2.254 0.01]

ZX

Y

System B gage port MB

Port ISO 11926-1 9/16-1828 max. clearance dia for fitting

Case gage port M14

Port ISO 11926-1 7/16-20except spot face depth: 5 max.21 max. clearance dia for fitting

Charge filtration port E

Port ISO 11926-1 7/8-1442 max clearancedia for fitting

from filter

Charge filtration port F

Port ISO 11926-1 7/8-1442 max clearancedia for fittingto filter

ViewY

ViewX

Charge gage port M3

Port ISO 11926-1 9/16-1828 max. clearance diafor fittingafter filtering

Case drain port L2


Servo gage port M5

Port ISO 11926-1 7/16-2021 max. clearance dia for fitting

Charge pressure port

Port ISO 11926-1 5/16-24

Case pressure port

Port ISO 11926-1 1 1/16-1248 max. clearance diafor fitting

Case pressure port


ViewZ

Connector:

Deutsch DTM04-2P

285.6 1.0

[11.244 0.0391]

SAEC

221.1

51.0

[8.7

070.0

39]

Allother212.6

51.0

[8.3

720.0

39]

SAEC

135.7

651.0

[5.3

450.0

39]

Allothe

r127.2

651.0

[5.0

100.0

39]

294.4 1.0

[11.591 0.0391]

71.4 1.0

[2.812 0.0391]

Optional: Integrated charge pressure filtration

Charge gage port M6

Port ISO 11926-1 9/16-1828 max. clearance dia for fittingbefore filtering

CCWRotation

CWRotation

Dimensions

P003 417

S

F00B

C2 C1

F00A

M4

M5

M14

M3 L2 MA

A

CW

MB

B

M6 1 2

R1

R2

L4

Physical properties

Features UnitSizes

089 100

Displacement cm3 [in3] 89.2 [5.44] 101.7 [6.21]

Weight (without PTO and filter) kg [lb] 62 [137]

Operating parameters

Input

speed

Minimummin-1

(rpm)

500

Rated 3300

Maximum 3800

System

pressure

Maximum working

pressure*bar [psi]

450 [6525] 420 [6090]

Maximum pressure 480 [6960] 450 [6525]

Minimum low loop 10 [150]

Case

pressure

Ratedbar [psi]

3.0 [40]

Maximum 5.0 [75]* Applied pressures above maximum working pressure

requires Sauer-Danfoss application approval. T000 167E

Documents

Sauer_H1-Pump90-2.pdf