KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

SORALUCE FR 16000

Traveling column milling center

Manufacturer SORALUCE Model FR 16000 Year of manufacture 2001 Control HEIDENHAIN TNC 430 Machine number 5124 Travels X – 16.000 mm / Y – 3.200 mm / Z – 1.500 mm Spindle speed 4.000 rpm with 2-stage gearbox from ZF

Last geometry protocol was made in August 2017

2 - SORALUCE FR 16000

TECHNICAL DATA

Milling column X axis (longitudinal) 16.000 mm

Y axis (vertical) 3.200 mm

Z axis (transversal) 1.500 mm

Guideway length 18.500 mm

Guideway width 1.400 mm

Deepest milling position of the spindle nose measured from the ground (Head horizontal)

Orthogonal headstock: 1.050 mm Drill head: 1.300 mm

Low column version 870 x 900 x 2.625 mm 3.000 kg

High column version 870 x 900 x 3.025 mm 3.500 kg Spindle motor drive Motor performance orthogonal headstock 37 kW

Motor performance drill head 37 kW

Holder ISO 50 / DIN 69871-AD

Speeds orthogonal headstock 8'8÷250/1.000 ÷ 4 .000 rpm

Speeds drill head 17'6 ÷ 231/923 ÷ 2.000 rpm Rapid traverse and feed Feed range 2 ÷ 5.000 mm/min

Rapid traverse X/Y/Z axes 15.000 mm/min

Power of the feed motor X axis 2 x 41‘5 Nm

Power of the feed motor Y axis 41‘5 Nm

Power of the feed motor Z axis 41‘5 Nm

Weight, approx. 47.000 kg Tool holder

ISO SK-50 DIN 69871-AD

Pull studs DIN 69872, form A

Air supply to the machine 300 L/min at 4‘5 bar

Low pressure cooling system 50 L/min

Capacity of the container 1.000 l

Power / Speed diagram

3 - SORALUCE FR 16000

Torque / Speed diagram

4 - SORALUCE FR 16000

Tools Taper DIN 69871 - A50

Draw bar DIN 69872 – A28

Diameter (adjacent positions free) 200 mm

Diameter (adjacent positions occupied) 120 mm

Max. length 400 mm

Max. weight 20 kg

Maximum weight of all tools in the magazine 480 kg

Magazine Number of tools 60

Drive hydraulic- motor

Motor torque 260 Nm

Gear reduction i : 1/4.5

Pressure 70 bar

Flow rate 22 l/min

Linear chain speed 15.5 m/min

Stopping system delay detector

Position keeping system hydro-mechanic barrier

Position keeping system control Microruptor

Positioning control detector

Tool barrier balls and feathers

Unlock tool hydraulic / hand lever

Tool counter detector

Tool detection photocell

„Origin“ control (tool no. 1) Detektor

5 - SORALUCE FR 16000

6 - SORALUCE FR 16000

Tool holder

Pull studs

7 - SORALUCE FR 16000

EQUIPMENT

High-performance milling head with 1° pitch and oil cooling

Fixed milling boring head

Tool changer for 60 tools

Pick-up station for tool changer heads

CNC rotary and sliding table (size 3.000 x 2.500 mm / Loading 40t / motor displacement in Z 1.500 mm)

2 x Angle tables (size 4.000 x 1.200 x 1.000 mm)

Clamping table (size 1.500 x 3.600 mm)

Internal cooling 20 bar pressure

2x chip conveyors longitudinal and transversal

Measuring system M&H

Paper band filter unit

Clamping field (size 7.000 mm x 2.500 mm x 500 mm)

Electronic hand wheel HEIDENHAIN

User guide / Documentation

Machine parameters on CD

MACHINE PICTURES

8 - SORALUCE FR 16000

9 - SORALUCE FR 16000

*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

Thank you very much for your interest

KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de