Upload
vuongdat
View
230
Download
0
Embed Size (px)
Citation preview
AC / EC Transformer Fans Version 05/2007
The engineer’s choice
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:54 Seite 1
2
The new AC / EC transformer fans from ebm-papst
Robust, quiet and speed-controlled
The new transformer fans with asynchronous and EC motor drives are now
also available for the more demanding use with power transformers. The
line goes up without gap from size 450 mm to 990 mm in outer diameter.
The transformer fans consist of the components motor impeller, motor sup-
port structure and duct nozzle.
Depending on the size, the motor impeller is made up of either an AC or EC
external-rotor motor with screwed on hybrid blades made of die-cast alu-
minium or plastic / aluminium.
The motor support structure is on the suction side. This also makes for
compliance with protection against accidental contact.
The duct nozzle is made of dip galvanised sheet steel. On the pressure side,
there is a circumferential flange that ensures the fan can be directly scre-
wed onto the oil radiator.
These new fans with their excellent design and functionality are the result
of intensive research and the expertise that comes with years of pioneering
developments, supported by comprehensive computations and simulations
especially with respect to long service life and corrosion resistance.
Axial fans with external-rotor motors in AC and EC technology are our world. What is new is that
they are now used for transformer cooling. But then again, why not? After all, efficiency, low
noise and total reliability are called for in such an application, too!
And so our new AC / EC transformer fans are first choice with project and design engineers, not
only when it comes to transformer cooling.
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:54 Seite 2
3
Technical parameters & scope 4
AC size 450 8
The new AC / EC transformer fans from ebm-papst 2
AC size 500 12
AC size 630 16
AC size 800 18
EC size 710 22
EC size 800 24
EC size 990 26
Accessories 28
Electrical connections 29
Distributors, agents & subsidiaries 30
Table of content
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:54 Seite 3
4
Technical parameters & scope
High standards for all ebm-papst products
Here at ebm-papst, we constantly strive to further improve our products in order to be able to offer you the best possible
product for your application. Careful monitoring of the market ensures that technical innovations are reflected in the
improvements of our products. Based on the technical parameters listed below and the ambience you want our product to
operate in, we here at ebm-papst can always work out the best solution for your specific application.
General performance parameters
Any deviations from the technical data and parameters described here are
listed on the product-specific data sheet.
Operating mode
If no other operating mode is specified on the product-specific data sheet,
the operating mode is taken to be continuous operation (S1).
Insulation class (acc. to EN 60335)
On principle, our products comply with insulation class F.
Products with other insulation class are especially marked in the
product-specific data sheets.
Protection class
In general, our products comply with protection class I (acc. to EN 50178
and EN 60335-1). Products with other protection class are specially
indicated in the product-specific data sheets.
Type of protection
The type of protection applying to each product (according to DIN EN
60034-5) depends on the mounting position and is listed together with
the relevant mounting position in the product-specific data sheet.
Drilled condensate discharges / mounting position
Condensate discharges are drilled depending on the mounting position.
The product-specific data sheets provide information on this.
Please make sure that the drilled condensate discharges are not
obstructed or closed.
Transformer fans for forced cooling of oil radiators are conventionally
mounted with the air flowing in either horizontal or vertical (blowing
upwards) direction. This is why a drilled condensate discharge is provided
for in the stator flange.
Service life
The service life of ebm-papst products depends on two major factors:
- the service life of the insulation system
- the service life of the bearing system
The service life of the insulation system mainly depends on voltage level,
temperature and ambient conditions, such as humidity and condensation.
The service life of the bearing system depends mainly on the thermal load
on the bearing.
The majority of our products use maintenance-free ball bearings for any
mounting position possible.
The service life L10 of the ball bearings can be taken as ca. 40,000 ope-
rating hours at an ambient temperature of 40 °C, yet this estimate can
vary according to the actual ambient conditions.
We gladly provide you with a lifetime calculation taking into account your
specific operating conditions.
Thermal protection / motor protection
Our ebm-papst motors for transformer cooling are protected in accordan-
ce with the relevant directives.
AC fans feature thermal overload protection. The user is asked to under-
take the proper action to read this T.O.P. and to make sure the fans are
disconnected from the mains in case an alarm is given.
With EC fans, the motor is thermally protected as well, including electronic
reading and assessing, and the electronics are protected via current
limiter.
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:54 Seite 4
5
Sound power level
All acoustic data is established in keeping with DIN 45635 and ISO
3744/3745 to accuracy class 2 and given as A-weighted. To measure
sound power level Lw 10 microphones are distributed on an enveloping
surface on the suction side of the fan under test (measuring set-up as
per DIN 45635 T38).
Measuring conditions
ebm-papst products are measured under the following terms and
conditions:
- axial fans in the wall ring and without guard grille
- Depending on the mounting situation, there can be deviations from the
characteristics as specified.
Direction of air flow
The direction of air flow is given as follows:
Direction of air flow "A"
System of units
All technical figures are given in SI units.
Measuring station
"A" >
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:54 Seite 5
6
Mechanical strain / performance parameters
All ebm-papst products are subjected to comprehensive tests complying
with the normative specifications. In addition to this, the tests also reflect
the vast experience and expertise of ebm-papst.
Vibration test
Vibration tests are carried out in compliance with
- vibration test in operation according to DIN IEC 68, parts 2-4
- vibration test at standstill according to DIN IEC 68, parts 2-4
Shock load
Shock load tests are carried out in compliance with
- shock load according to DIN IEC 68, parts 2-27
Balancing quality
Testing the balancing quality is carried out in compliance with
- residual imbalance according to DIN ISO 1940
- standard balancing quality level G 6.3 (corresponding to 30 g x mm/kg)
Should you require a higher balancing quality level for your specific appli-
cation, please let us know and specify this when ordering your product.
Chemo-physical strain / performance parameters
For information on chemo-physical strain, please turn to our brochure
„Protecting fans against water and the elements“:
Part no. 37685-7-8811
Left: Climate cabinetRight: Salt spray test equipment
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:54 Seite 6
7
Legal and normative directives
The products described in this catalogue are designed, developed and
produced in keeping with the standards in place for the relevant product
and , if known, the conditions governing the relevant fields of application.
Standards
The AC products described here comply to EN 60034-1.
EC products are in keeping with the applicable specific standard.
EMC
In general, our EC products comply with the following EMC standards:
- interference emission EN 61000-6-3
- interference immunity EN 61000-6-2
- harmonics EN 61000-3-2/3
Wherever other standards apply, this is indicated in the data sheets.
Complying with the EMC standards has to be established on the final
appliance, as different mounting situations can result in modified and
changed EMC properties.
Leakage current
< 3.5 mA acc. to EN 60950-1
Measuring according to fig. D.1 corresponding to IEC 60990 fig. 4
Approvals
In case you require a specific approval for your ebm-papst product
(VDE, UL, GOST, CCC, CSA, etc. please let us know.
Most of our products can be supplied with the relevant approval.
For further and more detailed information on the specific approvals,
simply turn to the data sheets of the respective products.
Left: Extended-time test roomMiddle: Shock test
Right: Condensate water test
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:54 Seite 7
AC transformer fansØ 450, 50 Hz
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of sheet aluminium, varnished, RAL 9005Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005Terminal box made of die-cast aluminium, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
8
Motor
M4D110-EF
Nominal data
subject to alterations
Blad
e an
gle
Char
acte
ristic
Nom
inal
vol
tage
Freq
uenc
y
Air f
low
Max
. bac
k pr
essu
re
Spee
d/rp
m
Pow
er in
put
Curr
ent d
raw
Star
t-up
cur
rent
Perm
. am
b. te
mp.
Mas
s
0°
Type
W4D 450
kg
13,5
VAC Hz m3/h min-1 W A A Pa °C
400 Δ 50 7210 1380 410 3,40 0,90 115 -40..+95400 Y 50 6070 1150 295 1,20 0,50 75 -40..+95
A
B
3000 4000 5000 6000 7000
2000 2500 [CFM]3000 3500 4000
[Pa]
[in H
2O]
[m3/h]
10
20
30
40
50
60
70
80
90
100
110
120
0,1
0,2
0,3
0,4
A
B
11
4
4
3
3
2
2
Characteristics n[min-1]
P1[W]
I[A]
A
B
A
B
1
2
A
A
3
4
2
1
B
B 4
3
LwA[dB(A)]
1380
1365
1355
1350
1150
1120
1090
1075
410
450
475
490
295
320
335
340
0,90
0,97
0,99
1,02
0,50
0,56
0,58
0,59
76
76
77
79
72
71
73
75
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 8
9
"A" >
Cable gland M20
– Motor protection: TOP brought out (on terminal strip)– Cable exit: lateral via terminal box– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (according to EN 60034)
Selection Blad
e an
gle
0°
Type
W4D450
Dire
ctio
n of
air
flow
W4D450-CG01 -80"A"
119
115
263
130
Ø515
Ø454
Ø600
Ø487
12xØ9,5
12x30˚
Guard grillesp. 28
Electr. connectionsp. 29
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 9
AC transformer fansØ 450, 60 Hz
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of sheet aluminium, varnished, RAL 9005Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005Terminal box made of die-cast aluminium, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
10
Motor
M4D110-EF
Nominal data
subject to alterations
Blad
e an
gle
Char
acte
ristic
Nom
inal
vol
tage
Freq
uenc
y
Air f
low
Max
. bac
k pr
essu
re
Spee
d/rp
m
Pow
er in
put
Curr
ent d
raw
Star
t-up
cur
rent
Perm
. am
b. te
mp.
Mas
s
0°
Type
W4D 450
kg
13,5
VAC Hz m3/h min-1 W A A Pa °C
480 Δ 60 8490 1620 640 4,00 1,03 155 -40..+60480 Y 60 6800 1305 460 1,30 0,64 90 -40..+60
A
B
3000 4000 5000 6000 7000 8000
2000 2500 [CFM]3000 3500 4000 4500 5000
[Pa]
[in H
2O]
[m3/h]
20
40
60
80
100
120
140
160
0,1
0,2
0,3
0,4
0,5
0,6
A
B
11
4
4
3
32
2
Characteristics n[min-1]
P1[W]
I[A]
LwA[dB(A)]
A
B
A
B
1
2
A
A
3
4
2
1
B
B 4
3
1620
1600
1585
1575
1305
1250
1215
1195
640
730
770
800
460
495
505
515
1,03
1,12
1,17
1,19
0,64
0,69
0,71
0,72
80
80
82
82
75
74
76
76
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 10
11
"A" >
Cable gland M20
– Motor protection: TOP brought out (on terminal strip)– Cable exit: lateral via terminal box– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (according to EN 60034)
Selection Blad
e an
gle
0°
Type
W4D450
Dire
ctio
n of
air
flow
W4D450-CG01 -80"A"
119
115
263
130
Ø515
Ø454
Ø600
Ø487
12xØ9,5
12x30˚
Guard grillesp. 28
Electr. connectionsp. 29
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 11
AC transformer fansØ 500, 50 Hz
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of sheet aluminium, varnished, RAL 9005Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005Terminal box made of die-cast aluminium, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
12
2000 3000 4000 5000 6000 7000 8000 9000
1500 2000 [CFM]2500 3000 3500 4000 4500 5000 5500
[Pa]
[in H
2O]
[m3/h]
20
40
60
80
100
120
140
160
0,1
0,2
0,3
0,4
0,5
0,6
A
B
111111
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
22
2
C
D
E
F
Characteristics n[min-1]
P1[W]
I[A]
A
B
A
B
1
2
A
A
3
4
2
1
B
B 4
3
LwA[dB(A)]
1380
1355
1345
1325
1160
1100
1070
1040
620
705
755
815
455
500
520
540
1,30
1,39
1,44
1,52
0,77
0,84
0,87
0,91
77
77
78
80
73
73
72
74
C
D
C
D
1
2
C
C
3
4
2
1
D
D 4
3
945
940
930
925
830
800
780
770
250
285
300
315
175
200
215
225
0,70
0,75
0,76
0,76
0,31
0,36
0,37
0,39
69
70
70
71
66
67
66
67
E
F
E
F
1
2
E
E
3
4
2
1
F
F 4
3
715
710
710
700
650
640
630
615
180
190
200
210
100
110
115
120
0,60
0,64
0,63
0,61
0,21
0,23
0,24
0,25
63
64
62
65
61
61
60
61
Type
W4D500
W6D500
W8D500
Motor
M4D110-GF
M6D110-EF
M8D110-EF
Nominal data
subject to alterations
Blad
e an
gle
0°
0°
0°
Char
acte
ristic
Nom
inal
vol
tage
Freq
uenc
y
Air f
low
Max
. bac
k pr
essu
re
Spee
d/rp
m
Pow
er in
put
Curr
ent d
raw
Star
t-up
cur
rent
Perm
. am
b. te
mp.
Mas
s
kg
17,1
15,1
15,1
VAC Hz m3/h min-1 W A A Pa °C
400 Δ 50 9590 1380 620 5,80 1,30 160 -40..+80400 Y 50 8120 1160 455 2,00 0,77 100 -40..+80400 Δ 50 6700 945 250 2,55 0,70 75 -40..+90400 Y 50 5910 830 175 0,85 0,31 50 -40..+90400 Δ 50 5030 715 180 ---- 0,60 45 -40..+70400 Y 50 4600 650 100 ---- 0,21 34 -40..+70
A
B
C
D
E
F
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 12
13
"A" >
Cable gland M20
– Motor protection: TOP brought out (on terminal strip)– Cable exit: lateral via terminal box– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (according to EN 60034)
119
115
268
165
Ø561
Ø503
Ø660
Ø541
12xØ9,5
12x30˚
Guard grillesp. 28
Electr. connectionsp. 29
Type
W4D500
W6D500
W8D500
Selection Blad
e an
gle
0°
0°
0°
Dire
ctio
n of
air
flow
W4D500-CD03 -80
W6D500-CG03 -80
W8D500-CG01 -80
"A"
"A"
"A"
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 13
AC transformer fansØ 500, 60 Hz
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of sheet aluminium, varnished, RAL 9005Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005Terminal box made of die-cast aluminium, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
14
2000 4000 6000 8000 10000
2000 [CFM]3000 4000 5000 6000
[Pa]
[in H
2O]
[m3/h]
20
40
60
80
100
120
140
0,1
0,2
0,3
0,4
0,5
A
B
111111
4
4
4
44
4
3
3
3
3
3
3
2
2
2
22
2
C
D
E
F
Characteristics n[min-1]
P1[W]
I[A]
LwA[dB(A)]
Type
W4D500
W6D500
W8D500
Motor
M4D110-GF
M6D110-EF
M8D110-EF
Nominal data
subject to alterations
Blad
e an
gle
0°
0°
0°
Char
acte
ristic
Nom
inal
vol
tage
Freq
uenc
y
Air f
low
Max
. bac
k pr
essu
re
Spee
d/rp
m
Pow
er in
put
Curr
ent d
raw
Star
t-up
cur
rent
Perm
. am
b. te
mp.
Mas
s
kg
17,1
15,1
15,1
VAC Hz m3/h min-1 W A A Pa °C
480 Δ 60 11300 1620 1000 6,50 1,55 150 -40..+50480 Y 60 8970 1280 695 2,20 0,98 84 -40..+50480 Δ 60 7900 1115 380 2,80 0,75 100 -40..+75480 Y 60 6840 960 280 0,95 0,41 60 -40..+75480 Δ 60 6000 850 245 ---- 0,63 65 -40..+65480 Y 60 5360 760 150 ---- 0,25 45 -40..+65
A
B
C
D
E
F
C
D
C
D
1
2
C
C
3
4
2
1
D
D 4
3
1115
1105
1095
1090
960
910
885
865
380
445
470
490
280
315
330
345
0,75
0,79
0,82
0,83
0,41
0,46
0,48
0,50
73
74
74
75
69
70
69
70
E
F
E
F
1
2
E
E
3
4
2
1
F
F 4
3
850
845
840
830
760
735
720
700
245
265
280
300
150
170
180
190
0,63
0,66
0,66
0,65
0,25
0,28
0,29
0,30
67
67
67
70
64
64
63
65
A
B
A
B
1
2
A
A
3
4
2
1
B
B 4
3
1620
1605
1590
1570
1280
1250
1210
1170
1000
1070
1145
1210
695
725
750
770
1,55
1,70
1,80
1,87
0,98
1,04
1,08
1,11
80
80
80
81
75
75
75
74
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 14
15
"A" >
Cable gland M20
– Motor protection: TOP brought out (on terminal strip)– Cable exit: lateral via terminal box– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (according to EN 60034)
119
115
268
165
Ø561
Ø503
Ø660
Ø541
12xØ9,5
12x30˚
Guard grillesp. 28
Electr. connectionsp. 29
Type
W4D500
W6D500
W8D500
Selection Blad
e an
gle
0°
0°
0°
Dire
ctio
n of
air
flow
W4D500-CD03 -80
W6D500-CG03 -80
W8D500-CG01 -80
"A"
"A"
"A"
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 15
AC transformer fansØ 630, 50 Hz
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of sheet aluminium, varnished, RAL 9005Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005Terminal box made of die-cast aluminium, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
16
2000 4000 6000 8000 10000 12000
2000 [CFM]3000 4000 5000 6000 7000
[Pa]
[in H
2O]
[m3/h]
10
20
30
40
50
60
70
80
90
100
110
0,1
0,2
0,3
0,4
A
B
1111
4
4 4
4
3
33
3
2
22
2
C
D
Characteristics n[min-1]
P1[W]
I[A]
A
B
A
B
1
2
A
A
3
4
2
1
B
B 4
3
LwA[dB(A)]
C
D
C
D
1
2
C
C
3
4
2
1
D
D 4
3
675
660
655
640
525
495
475
440
300
330
350
380
180
195
200
210
0,82
0,84
0,85
0,91
0,37
0,40
0,41
0,42
71
69
69
69
65
63
62
61
Type
W6D630
W8D630
Motor
M6D110-IA
M8D110-GF
Nominal data
subject to alterations
Blad
e an
gle
0°
0°
Char
acte
ristic
Nom
inal
vol
tage
Freq
uenc
y
Air f
low
Max
. bac
k pr
essu
re
Spee
d/rp
m
Pow
er in
put
Curr
ent d
raw
Star
t-up
cur
rent
Perm
. am
b. te
mp.
Mas
s
kg
21,8
19,5
VAC Hz m3/h min-1 W A A Pa °C
400 Δ 50 12850 925 610 4,30 1,45 110 -40..+60400 Y 50 10750 770 440 1,45 0,80 65 -40..+60400 Δ 50 9285 675 300 1,90 0,82 62 -40..+65400 Y 50 7280 525 180 0,60 0,37 30 -40..+65
A
B
C
D
925
915
910
895
770
735
710
675
610
670
720
790
440
470
490
520
1,45
1,48
1,54
1,60
0,80
0,83
0,86
0,91
77
75
76
76
73
71
71
70
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 16
17
"A" >
Cable gland M20
– Motor protection: TOP brought out (on terminal strip)– Cable exit: lateral via terminal box– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (according to EN 60034)
119
115
263
205
Ø700
Ø634
Ø800
Ø674
16xØ11,516x22,5˚
Guard grillesp. 28
Electr. connectionsp. 29
Type
W6D630
W8D630
Selection Blad
e an
gle
0°
0°
Dire
ctio
n of
air
flow
W6D630-CA01 -80
W8D630-CD01 -80
"A"
"A"
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 17
AC transformer fansØ 800, 50 Hz
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of die-cast aluminium, varnished, RAL 9005Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005Terminal box made of die-cast aluminium, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: counter-clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
4000 8000 12000 16000 20000 24000
4000 6000 [CFM]8000 10000 1400012000
[Pa]
[in H
2O]
[m3/h]
20
40
60
80
100
120
140
160
180
0,1
0,2
0,3
0,4
0,5
0,6
0,7
A
B
111111
4
44
4
4
4
3
33
3
3
3
2
22
2
22
C
D
E
F
Characteristics
18
n[min-1]
P1[W]
I[A]
C
D
C
D
1
2
C
C
3
4
2
1
D
D 4
3
LwA[dB(A)]
695
690
680
660
585
560
530
500
690
760
850
960
465
505
540
570
2,15
2,21
2,28
2,40
0,99
1,06
1,13
1,20
68
67
67
71
64
63
62
64
A
B
A
B
1
2
A
A
3
4
2
1
B
B 4
3
930
915
900
880
785
750
705
665
1440
1555
1750
1980
1030
1075
1160
1225
3,50
3,48
3,72
4,05
1,90
2,02
2,17
2,30
73
71
72
78
70
68
67
72
E
F
E
F
1
2
E
E
3
4
2
1
F
F 4
3
460
455
445
440
390
375
360
340
290
310
335
360
160
175
185
195
1,06
1,09
1,10
1,12
0,41
0,43
0,45
0,46
60
59
58
61
56
55
55
55
Type
W6D800
W8D800
WZD800
Motor
M6D138-LA
M8D138-LA
MZD138-HF
Nominal data
subject to alterations
Blad
e an
gle
0°
0°
0°
Char
acte
ristic
Nom
inal
vol
tage
Freq
uenc
y
Air f
low
Max
. bac
k pr
essu
re
Spee
d/rp
m
Pow
er in
put
Curr
ent d
raw
Star
t-up
cur
rent
Perm
. am
b. te
mp.
Mas
s
kg
42,5
42,5
38,5
VAC Hz m3/h min-1 W A A Pa °C
400 Δ 50 24780 930 1440 13,0 3,50 180 -40..+60400 Y 50 20780 785 1030 4,30 1,90 100 -40..+60400 Δ 50 18520 695 690 6,00 2,15 105 -40..+65400 Y 50 15520 585 465 2,00 0,99 57 -40..+65400 Δ 50 12050 460 290 2,40 1,06 44 -40..+80400 Y 50 10200 390 160 1,40 0,41 25 -40..+80
A
B
C
D
E
F
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 18
– Motor protection: TOP brought out (on terminal strip)– Cable exit: lateral via terminal box– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (according to EN 60034)
Ø837
24x15˚
24xØ11,5
Ø100
0
Ø875
Ø795
245
327
115
119
19Guard grillesp. 28
Electr. connectionsp. 29
"A" >
Cable gland M20
Type
W6D800
W8D800
WZD800
Selection Blad
e an
gle
0°
0°
0°
Dire
ctio
n of
air
flow
W6D800-CJ01 -80
W8D800-CJ01 -80
WZD800-CM03-80
"A"
"A"
"A"
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 19
AC transformer fansØ 800, 60 Hz
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of die-cast aluminium, varnished, RAL 9005Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005Terminal box made of die-cast aluminium, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: counter-clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
4000 8000 12000 16000 20000
4000 6000 [CFM]8000 10000 12000
[Pa]
[in H
2O]
[m3/h]
10
20
30
40
50
60
70
0,05
0,1
0,15
0,2
0,25
A
B
1111
4
4
4
4
3
3
3
3
2
22
2
C
D
Characteristics
20
n[min-1]
P1[W]
I[A]
LwA[dB(A)]
Type
W8D800
WZD800
Motor
M8D138-LA
MZD138-HF
Nominal data
subject to alterations
Blad
e an
gle
0°
0°
Char
acte
ristic
Nom
inal
vol
tage
Freq
uenc
y
Air f
low
Max
. bac
k pr
essu
re
Spee
d/rp
m
Pow
er in
put
Curr
ent d
raw
Star
t-up
cur
rent
Perm
. am
b. te
mp.
Mas
s
kg
42,5
38,5
VAC Hz m3/h min-1 W A A Pa °C
480 Δ 60 21820 815 1070 6,60 2,33 65 -40..+60480 Y 60 16980 640 680 2,20 1,20 35 -40..+60480 Δ 60 14310 540 400 2,50 1,15 60 -40..+70480 Y 60 11490 440 230 1,45 0,47 30 -40..+70
A
B
C
D
C
D
C
D
1
2
C
C
3
4
2
1
D
D 4
3
540
535
520
510
440
415
390
370
400
440
480
525
230
250
260
270
1,15
1,17
1,20
1,23
0,47
0,50
0,52
0,53
64
62
62
65
59
57
56
57
A
B
A
B
1
2
A
A
3
4
2
1
B
B 4
3
815
810
800
800
640
615
595
585
1070
1160
1220
1260
680
710
725
735
2,33
2,42
2,49
2,57
1,20
1,25
1,28
1,30
71
70
70
70
66
65
64
64
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 20
– Motor protection: TOP brought out (on terminal strip)– Cable exit: lateral via terminal box– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (according to EN 60034)
Ø837
24x15˚
24xØ11,5
Ø100
0
Ø875
Ø795
245
327
115
119
21Guard grillesp. 28
Electr. connectionsp. 29
"A" >
Cable gland M20
Type
W8D800
WZD800
Selection Blad
e an
gle
0°
0°
Dire
ctio
n of
air
flow
W8D800-CJ01 -80
WZD800-CM03-80
"A"
"A"
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 21
22
EC transformer fansØ 710
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of die-cast aluminium, varnished, RAL 9005Stator and electronics housing made of die-cast aluminium, varnished, RAL 9005Rotor made of sheet steel, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: counter-clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
Type
W3G710
Motor
M3G150-IF 0°
VAC Hz m3/h min-1 W A Pa °C kg
380-480 50/60 23900 1240 1990 3,0 245 -40..+60 45,5
Char
acte
ristic
Blad
e an
gle
Volta
ge ra
nge
Freq
uenc
y
Spee
d/rp
m
Air f
low
Nominal data(1)
subject to alterations(1)
at 400 VAC
Pow
er in
put
Curr
ent d
raw
Max
. bac
k pr
essu
re
Perm
. am
b. te
mp.
Mas
s
A
4000 8000 12000 16000 20000
0 2000 4000 [CFM]6000 8000 10000 12000
[Pa]
[in H
2O]
[m3/h]
20
40
60
80
100
120
140
160
180
200
220
240
260
0,2
0,4
0,6
0,8
1,0
A
159
6
10
7
11
12
1317
1819
20
14
15
16
8
4
3
2
Characteristics n[min-1]
P1[W]
I[A]
A
A
9
10
A
A
11
12
LwA[dB(A)]
960
960
960
960
920
1150
1200
1250
1,40
1,75
1,80
1,90
74
74
76
79
A
A
A
A
1
2
A
A
3
4
6
5
A
A 8
7
1240
1240
1240
1240
1100
1100
1100
1100
1990
2470
2590
2700
1390
1720
1810
1890
3,00
3,75
3,90
4,10
2,10
2,60
2,75
2,85
80
80
81
84
77
77
79
82
A
A
A
A
13
14
A
A
15
16
18
17
A
A 20
19
750
750
750
750
500
500
500
500
440
550
570
600
130
160
170
180
0,67
0,83
0,87
0,90
0,20
0,25
0,26
0,27
69
69
71
73
60
60
62
64
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 22
23Guard grillesp. 28
Electr. connectionsp. 29
– Technical features: control input 0-10 VDC / PWM, RS485 ebmBUS, alarm relay, integrated PID control, voltage supply for sensor, input for sensor 0-10 V respectively 4-20 mA, 0-10 V output for slave, PFC (passive), soft start, line undervoltage detection, phase failure detection
– Motor protection: motor current limitation, over-temperature protected electronics andmotor, locked-rotor protection
– Protection class: I (according to EN 61800-5-1)– Product conforming to standardt: CE– Approvals: GOST, UL and VDE are applied for
Type
W3G710 "A" 0° W3G710-CH06 -80
Selection Blad
e an
gle
Dire
ctio
n of
air
flow
Ø751
354
230
Ø900
Ø710
Ø780
16x22.5˚
16xØ11,5
"A" >
Cable gland M20
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:55 Seite 23
24
EC transformer fansØ 800
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of die-cast aluminium, varnished, RAL 9005Stator and electronics housing made of die-cast aluminium, varnished, RAL 9005Rotor made of sheet steel, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: counter-clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
Type
W3G800
Motor
M3G150-IF 0°
VAC Hz m3/h min-1 W A Pa °C kg
380-480 50/60 25400 980 1370 2,1 220 -40..+60 49,5
Char
acte
ristic
Blad
e an
gle
Volta
ge ra
nge
Freq
uenc
y
Spee
d/rp
m
Air f
low
Nominal data(1)
subject to alterations(1)
at 400 VAC
Pow
er in
put
Curr
ent d
raw
Max
. bac
k pr
essu
re
Perm
. am
b. te
mp.
Mas
s
A
4000 8000 12000 16000 20000
0 2000 4000 [CFM]6000 8000 10000 12000
[Pa]
[in H
2O]
[m3/h]
20
40
60
80
100
120
140
160
180
200
220
0,2
0,4
0,6
0,8
A
159
6
10
7
11
12
1317
18
19
20
14
15
16
8
4
3
2
Characteristics n[min-1]
P1[W]
I[A]
A
A
9
10
A
A
11
12
LwA[dB(A)]
820
820
820
820
800
1030
1135
1295
1,25
1,60
1,70
2,00
71
70
73
78
A
A
A
A
1
2
A
A
3
4
6
5
A
A 8
7
980
980
980
980
900
900
900
900
1370
1760
1935
2210
1060
1365
1500
1715
2,10
2,70
2,95
3,40
1,65
2,10
2,25
2,60
74
73
76
82
73
72
75
80
A
A
A
A
13
14
A
A
15
16
18
17
A
A 20
19
650
650
650
650
400
400
400
400
400
510
560
650
95
120
130
150
0,61
0,78
0,85
0,98
0,14
0,18
0,20
0,23
66
65
68
73
55
54
57
62
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 24
25Guard grillesp. 28
Electr. connectionsp. 29
– Technical features: control input 0-10 VDC / PWM, RS485 ebmBUS, alarm relay, integrated PID control, voltage supply for sensor, input for sensor 0-10 V respectively 4-20 mA, 0-10 V output for slave, PFC (passive), soft start, line undervoltage detection, phase failure detection
– Motor protection: motor current limitation, over-temperature protected electronics andmotor, locked-rotor protection
– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: GOST, UL and VDE are applied for
Type
W3G800 "A" 0° W3G800-CH03 -80
Selection Blad
e an
gle
Dire
ctio
n of
air
flow
Ø837
24x15˚
24xØ11,5352
245
Ø100
0
Ø795
Ø865
"A" >
Cable gland M20
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 25
26
EC transformer fansØ 990
– Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006Screwed on fan blades made of die-cast aluminium, varnished, RAL 9005Stator and electronics housing made of die-cast aluminium, varnished, RAL 9005Rotor made of sheet steel, varnished, RAL 9005
– Direction of air flow: “A”– Direction of rotation: counter-clockwise, seen on rotor– Type of protection: IP 54 (according to EN 60529)– Insulation class: “F”– Mounting position: shaft horizontal or rotor on top– Condensate discharges: in the stator flange– Operating mode: Continuous operation (S1)– Bearings: Maintenance-free ball bearings
Type
W3G990
Motor
M3G150-IF
VAC Hz m3/h min-1 W A Pa °C kg
380-480 50/60 31000 650 1030 1,8 120 -40..+60 60,5
Char
acte
ristic
Volta
ge ra
nge
Freq
uenc
y
Spee
d/rp
m
Air f
low
Nominal data(1)
subject to alterations(1)
at 400 VAC
Pow
er in
put
Curr
ent d
raw
Max
. bac
k pr
essu
re
Perm
. am
b. te
mp.
Mas
s
A
5000 15000 25000
0 3000 6000 9000
[Pa]
20
40
60
80
100
120
0,1
0,3
0,4
[in H
2O]
0,2
[m3/h]
[CFM]12000 15000 180009
10
11
12
6
7
2
8
3
4
5 1
A
13
14
15
16
Characteristics n[min-1]
P1[W]
I[A]
LwA[dB(A)]
A
A
9
10
A
A
11
12
450
450
450
450
370
430
460
500
0,80
0,90
0,90
1,00
72
73
74
77
A
A
13
14
A
A
15
16
300
300
300
300
100
120
130
145
0,17
0,22
0,23
0,23
63
64
65
68
A
A
A
A
1
2
A
A
3
4
6
5
A
A 8
7
650
650
650
650
540
540
540
540
1030
1230
1350
1500
610
720
800
860
1,80
2,30
2,40
2,40
1,30
1,40
1,50
1,60
80
81
82
85
76
77
78
81
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 26
27Guard grillesp. 28
Electr. connectionsp. 29
– Technical features: control input 0-10 VDC / PWM, RS485 ebmBUS, alarm relay, integrated PID control, voltage supply for sensor, input for sensor 0-10 V respectively 4-20 mA, 0-10 V output for slave, PFC (passive), soft start, line undervoltage detection, phase failure detection
– Motor protection: motor current limitation, over-temperature protected electronics andmotor, locked-rotor protection
– Protection class: I (according to EN 61800-5-1)– Product conforming to standard: CE– Approvals: GOST, UL and VDE are applied for
Type
W3G990 "A" W3G990-CD05 -80
Selection Dire
ctio
n of
air
flow
Ø1043
24x15˚
24xØ11,5
Ø118
5
Ø100
0
Ø107
5
280
330
"A" >
Cable gland M20
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 27
28
Accessories
– Material: galvanised steel wire, plasticcoated in RAL no. 9006
Øa
7 Ø5
Øb
Part no.
40450-2-4039
40500-2-4039
40630-2-4039
40710-2-4039
40800-2-4039
40990-2-4039
Size
450
500
630
710
800
990
a b
487 450
541 490
674 630
751 710
837 790
1043 990
subject to alterations
Guard grilles (to be mounted on pressing side)
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 28
29
Star connection (3~ 400 VAC power line)
with TOP brought out
low speed
L3 TOPL2L1
1
2
V1U1
2V2U W
W
PE
Delta connection (3~ 400 VAC power line)
with TOP brought out
high speed
L3L2L1
W 22V2U
1U 1V 1W
PE TOP U1 = black
U2 = green
V1 = blue
V2 = white
W1 = brown
W2 = yellow
= green/yellow
U1 = black
U2 = green
V1 = blue
V2 = white
W1 = brown
W2 = yellow
= green/yellow
Electrical connections
RS A
RS B
RS A
RS B
GND
0-10
VPW
M
4-20
mA
+20
V
+10
V
0-10
VPW
M
GND
OUT
NO COM
NC L1 L2 L3 PE PE
KL3 KL2 KL1 PE
EC motors (size 150, 3-phase line-fed)
AC motors
Connector Signal Assignment / functionPE PE Protective earth
KL1 L3 Mains; L3
L2 Mains; L2
L1 Mains; L1
KL2
COM Alarm relay, COMMON (2A, 250 VAC, AC1)
NC
NO
Alarm relay, break for failure
Alarm relay, make for failure
Connector Signal Assignment / functionKL3 OUT
GND GND
GND GND
0-10 V / PWM
+10 V
+20 V
4-20 mA Control / Actual value input
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
Control / Actual value input (Impedance 100 kΩ)
0-10 V / PWM Control / Actual value input
Master output 0-10 V max. 3 mA
Supply for external potentiometer,
10 VDC (+10 %) @ 10 mA
Supply for external sensor,
20 VDC (±20 %) @ 50 mA
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 29
30
KoblenzWinfried SchaeferHinter der Kirch 10D-56767 UersfeldPhone +49 (0) 26 57 / 16 96Fax +49 (0) 26 57 / 16 [email protected]
MunichDipl.-Wirt.-Ing. (FH) Jens Peter Steinbergweg 6D-82285 HattenhofenPhone +49 (0) 81 45 / 80 92 25Fax +49 (0) 81 45 / 80 92 [email protected]
NurembergFriedrich KleinAdlerstraße 49/1D-73540 HeubachPhone +49 (0) 71 73 / 49 83Fax +49 (0) 71 73 / 80 [email protected]
OffenburgDipl.-Ing (FH) Ralf BraunHubeneck 21D-77704 OberkirchPhone +49 (0) 78 02 / 98 22 52Fax +49 (0) 78 02 / 98 22 [email protected]
StuttgartDipl.-Ing. (FH) Rudi WeinmannMühlhaldenweg 13D-73207 PlochingenPhone +49 (0) 71 53 / 92 89 80Fax +49 (0) 71 53 / 92 89 [email protected]
UlmGünter WilhelmAllgäuer Straße 7D-89269 VöhringenPhone +49 (0) 73 06 / 92 46 08Fax +49 (0) 73 06 / 92 46 [email protected]
Distributors
FrankfurtR.E.D. Handelsgesellschaft mbHGutenbergstraße 3D-63110 Rodgau - JügesheimPhone +49 (0) 61 06 / 84 10Fax +49 (0) 61 06 / 84 11 [email protected]
HamburgBreuell + Hilgenfeldt GmbHGrützmühlenweg 40D-22339 HamburgPhone +49 (0) 40 / 53 80 92 20Fax +49 (0) 40 / 53 80 92 [email protected]
MunichA. Schweiger GmbHOhmstraße 1D-82054 SauerlachPhone +49 (0) 81 04 / 8 97 0Fax +49 (0) 81 04 / 8 97 [email protected]
(1 to 5 pieces)
NorthBreuell + Hilgenfeldt GmbHGrützmühlenweg 40D-22339 HamburgPhone +49 (0) 40 / 53 80 92 20Fax +49 (0) 40 / 53 80 92 [email protected]
SouthHDS Ventilatoren Vertriebs GmbHGlaswiesenstraße 1D-74677 DörzbachPhone +49 (0) 79 37 / 80 29 68Fax +49 (0) 79 37 / 80 25 [email protected]
Agencies
BerlinDipl.-Ing. (TH) Jens DuchowHändelstraße 7D-16341 PanketalPhone +49 (0) 30 / 94 41 49 62Fax +49 (0) 30 / 94 41 49 [email protected]
DortmundDipl.-Ing. (FH) Hans-Joachim PundtAuf den Steinern 3D-59519 Möhnesee-VöllinghausenPhone +49 (0) 29 25 / 80 04 07Fax +49 (0) 29 25 / 80 04 [email protected]
FrankfurtDipl.-Ing. Christian KleffmannDr. Hermann-Krause Straße 23D-63452 HanauPhone +49 (0) 61 81 / 18 98 12Fax +49 (0) 61 81 / 18 98 [email protected]
HalleDipl.-Ing. (TU) Michael HanningLerchenweg 4D-06120 LieskauPhone +49 (0) 3 45 / 5 51 24 56Fax +49 (0) 3 45 / 5 51 24 [email protected]
HamburgIngenieurbüro Breuell GmbHDirk KahlElektroingenieurGrützmühlenweg 40D-22339 HamburgPhone +49 (0) 40 / 53 80 92 10Fax +49 (0) 40 / 53 80 92 [email protected]
KasselDipl.-Ing. (FH) Ralph BrückHoherainstraße 38D-35075 GladenbachPhone +49 (0) 64 62 / 40 71 10Fax +49 (0) 64 62 / 40 71 [email protected]
Distributors, agencies and subsidiaries
Germany
ebm-papstMulfingen GmbH & Co. KG
Bachmühle 2D-74673 MulfingenPhone +49 (0) 79 38 / 81-0Fax +49 (0) 79 38 / [email protected]
www.ebmpapst.com
ebm-papstSt. Georgen GmbH & Co. KG
Hermann-Papst-Straße 1D-78112 St. GeorgenPhone +49 (0) 77 24 / 81-0Fax +49 (0) 77 24 / 81-13 [email protected]
www.ebmpapst.com
ebm-papstLandshut GmbH
Hofmark-Aich-Straße 25D-84030 LandshutPhone +49 (0) 8 71 / 707-0Fax +49 (0) 8 71 / [email protected]
www.ebmpapst.com
fan agent
compact fan agent
motor specialist
motor agent
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 30
31
Europe
Austriaebm-papst Motoren & Ventilatoren GmbHWestbahnstraße 5A-4490 St. FlorianPhone +43 / 72 24 / 66 01 10Fax +43 / 72 24 / 66 01 [email protected]
Belarusebm-papst Bel AgmbHProspekt Nesavisimosti 11/2 Zimmer 325, 512BY-220050 MinskPhone +375 / 17 / 209 95 61Fax +375 / 17 / 209 95 [email protected]
BelgiumVIBO Benelux B. V.Sales office Belgium-LuxemburgRomeinsestraat 6/0101Research Park HaasrodeB-3001 Heverlee-LeuvenPhone +32 / 16 / 39 62 00Fax +32 / 16 / 39 62 [email protected]
Bulgariaebm-papst Romania S.R.L.Str. Tirnavei Nr. 20RO-500327 BrasovPhone +40 / 268 / 312 805Fax +40 / 268 / 312 [email protected]
Croatiaebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 [email protected]
CyprusMATERO LTD37, St. Kyriakides AvenueP.O. Box 51744CY-3080 LimassolPhone +357 / 25 / 87 00 30Fax +357 / 25 / 38 13 [email protected]
Czech Republic / Slovakiaebm-papst CZ s.r.o.Krátká 379CZ-66461 Rajhradice u BrnaPhone +420 / 5 / 47 23 26 16Fax +420 / 5 / 47 23 26 [email protected]
DenmarkJenk A/SVallensbækvej 21DK-2605 BrøndbyPhone +45 / 43 / 63 11 11Fax +45 / 43 / 63 05 [email protected]
Estoniaebm-papst OyEesti FiliaalKadaka tee 3EST-10621 TallinnPhone +372 / 655 / 6978Fax +372 / 655 / 6979
Finlandebm-papst OyPuistotie 1FIN-02760 EspooPhone +358 / 9 / 88 70 22 0Fax +358 / 9 / 88 70 22 [email protected]
Franceebm-papst SARLZI Nord - rue A. MohlerBP 62F-67212 Obernai-CedexPhone +33 / 820 326 266Fax +33 / 3 / 88 67 38 [email protected]
GreeceHelcomaTh. Rotas & Co OEDavaki 65GR-17672 Kallithea-AttikiPhone +30 / 210 / 951 37 05Fax +30 / 210 / 951 34 [email protected]
Hungaryebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 [email protected]
IcelandRJ EngineersStangarhyl 1AIS-110 ReykjavikPhone +354 / 567 80 30Fax +354 / 567 80 [email protected]
Irelandebm-papst LimitedPortlaoise Business & Technology ParkMountrath RoadIRL-Portlaoise, Co. LaoisPhone +353 / 57 86 / 643 43Fax +353 / 57 86 / 643 [email protected]
Italyebm-papst SrlVia Cornaggia 108I-22076 Mozzate (Co)Phone +39 / 03 31 / 83 62 01Fax +39 / 03 31 / 82 15 [email protected]
Macedoniaebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 [email protected]
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 31
32
Russiaebm-papst Ural GmbHRosa Luxemburg Strasse 59RU-620026 JekaterinburgPhone +7 / 343 / 378 31 75Fax +7 / 343 / 378 31 [email protected]
ebm-papst Rus GmbHNizhegorodskaya 32, str. 15 office 420RU-109029 MoskauPhone +7 / 495 / 671 53 93Fax +7 / 495 / 671 53 [email protected]
ebm-papst RusSaint-Petersburg´s FilialZastavskaya 7RU-196084 Sankt-PetersburgPhone +7 / 812 / 449 96 07Fax +7 / 812 / 449 96 [email protected]
Serbia & Montenegroebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 [email protected]
Spainebm-papst Ibérica S.L.Avda. del Sistema Solar, 29E-28830 San Fernando de Henares (Madrid)Phone +34 / 91 / 678 08 94Fax +34 / 91 / 678 15 [email protected]
SwedenZiehl-ebm ABÄggelundavägen 2S-17562 JärfällaPhone +46 / 8 / 761 94 00Fax +46 / 8 / 36 23 [email protected]
Switzerlandebm-papst AGRütisbergstraße 1CH-8156 OberhasliPhone +41 / 44 / 732 20 70Fax +41 / 44 / 732 20 [email protected]
TurkeyAkantel Elektronik San. Tic. LTD. Sti.Atatürk Organize SanayiBölgesi 10007 SK. No.:6TR-35620 Cigli-IzmirPhone +90 / 2 32 / 32 82 090 -91Fax +90 / 2 32 / 32 80 [email protected]
Ukraineebm-papst Ukraine GmbHLepse Boulevard 4, Haus 47 Etage 5UA-03067 KievPhone +38 / 044 / 206 30 91Fax +38 / 044 / 206 30 [email protected]
United Kingdomebm-papst UK Ltd.Chelmsford Business ParkGB-Chelmsford Essex CM2 5EZPhone +44 / 12 45 / 46 85 55Fax +44 / 12 45 / 46 63 [email protected]
ebm-papst Automotive & Drives (UK) Ltd.Suite B, The BarnSheepdown, East IlsleyGB-Berkshire RG20 7LYPhone +44 / 87 07 / 66 51 70Fax +44 / 87 07 / 66 51 80A&[email protected]
NetherlandsVIBO Benelux B. V.Engelseweg 127Postbus 230NL-5705 AC HelmondPhone +31 / 4 92 / 50 29 00Fax +31 / 4 92 / 50 29 [email protected]
NorwayZiehl-ebm asP.B. 173 HolmliaN-1203 OsloPhone +47 / 22 / 76 33 40Fax +47 / 22 / 61 91 [email protected]
Polandebm-papst Polska Sp. z o.o.ul. Annopol 4APL-03236 WarszawaPhone +48 / 22 / 675 78 19Fax +48 / 22 / 676 95 [email protected]
Portugalebm-papst (Portugal), LdaAv. Marechal Gomes da Costa, 35 eRua Conselheiro Emidio NavarroP-1800-255 LisboaPhone +351 / 21 / 839 48 80Fax +351 / 21 / 839 47 [email protected]
Romaniaebm-papst Romania S.R.L.Str. Tirnavei Nr. 20RO-500327 BrasovPhone +40 / 268 / 312 805Fax +40 / 268 / 312 [email protected]
Distributors, agencies and subsidiariesfan agent
compact fan agent
motor specialist
motor agent
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:56 Seite 32
33
America
Argentiniaebm-papst de Argentina S.A.Hernandarias 148 Lomas del MiradorPcia. de Buenos Aires (1752)Phone +54 / 11 46 57 61 35Fax +54 / 11 46 57 20 [email protected]
Brasilebm-papst Motores Ventiladores Ltda.Rua Francisco D´Amico, 155Bairro PirajussaraBR-06785-290 Taboão da Serra-SPPhone +55 /11 / 41 38 50 90Fax +55 /11 / 41 38 50 [email protected]
Canadaebm-papst Canada Inc.1800 Ironstone Manor, Unit 2CDN-Pickering, Ontario, L1W3J9Phone +1 / 905 / 420 / 35 33Fax +1 / 905 / 420 / 37 [email protected]
Mexicoebm Industrial S.de R.L. de C.V.Paseo de Tamarindos 400-A-5to PisoCol. Bosques de las LomasMEX-Mexico 05120, D.F.Phone +52 / 55 / 50 91 44 44Fax +52 / 55 / 50 91 44 [email protected]
USAebm-papst Inc.P.O. Box 4009100 Hyde RoadUSA-Farmington, CT 06034Phone +1 / 860 / 674 15 15Fax +1 / 860 / 674 85 [email protected]
ebm-papst Automotive & Drives, Inc.3200 Greenfield, Suite 255USA-Dearborn, MI 48120Phone +1 / 313 / 406 80 80Fax +1 / 313 / 406 80 [email protected]
Africa
South Africaebm-papst South Africa (Pty) Ltd.P.O. Box 31241119 Yacht AvenueZA-2040 HoneydewPhone +27 / 11 / 794 34 34Fax +27 / 11 / 794 50 [email protected]
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:57 Seite 33
34
Distributors, agencies and subsidiariesfan agent
compact fan agent
motor specialist
motor agent
Asia
Chinaebm-papst Ventilator (Shanghai) Co., Ltd.No. 418, Huajing RoadWaiGaoQiao Free Trade ZoneNo. 2001, Yang Gao (N) RoadVRC-200131 Shanghai, P.R. of ChinaPhone +86 / 21 / 50 46 01 83Fax +86 / 21 / 50 46 11 [email protected]
Hong Kongebm-papst Ventilator (Shanghai) Co., Ltd.Hong Kong Representative OfficeUnit Nos. 13, 9/F, Technology Park18 On Lai Street, Sha Tin, N.T.HK-Hong Kong P.R. of ChinaPhone +852 / 21 45 / 86 78Fax +852 / 21 45 / 76 [email protected]
Indiaebm NADI International Pvt Ltd.26/3, G.N.T. Road, ErukkencherryIND-Chennai-600118Phone +91 / 44 / 25 37 25 56Fax +91 / 44 / 25 37 11 [email protected]
Indonesiaebm-papst IndonesiaRepresentative OfficeJalan Puri Kencana, Blok K7/3TRI-Jakarta 11610Phone +62 / 21 / 582 / 31 18Fax +62 / 21 / 582 / 31 [email protected]
IsraelPolak Bros. Import Agencies Ltd.9 Hamefalsim StreetIL-Kiryat Arie, Petach-Tikva 49514Phone +972 / 3 / 910 03 00Fax +972 / 3 / 579 66 [email protected]
Japanebm-papst Industries Japan K.K.12 Floor, Benex S-3 Bldg.3-20-8 Shinyokohama, Kohoku-kuJ-222-0033 YokohamaPhone +81 / 45 / 470 / 57 51Fax +81 / 45 / 470 / 57 [email protected]
Koreaebm-papst Korea Co. Ltd.6F, Trutec Bldg.B 6-2, Digital Media City (DMC)Sangam-Dong, Mapo-Gu ROK-Seoul 121-270Phone +82 / 2 / 36 62 / 13 24Fax +82 / 2 / 36 62 / 13 [email protected] www.ebmpapst.co.kr
Malaysiaebm-papst MalaysiaRepresentative OfficeBlock F1, 9A-4, Jalan PJU 1/42Dataran PrimaMAL-47301 Petaling JayaPhone +60 / 3 / 78 06 54 40Fax +60 / 3 / 78 06 54 [email protected]
Singaporeebm-papst SEA Pte. Ltd.23 Ubi Road 4, #05-00Olympia Industrial BuildingSGP-Singapore 408620Phone +65 / 68 42 84 38Fax +65 / 68 42 84 [email protected]
TaiwanETECO Engineering & Trading Corp.10F-I, No. 92, Teh-Wei Str.RC-Tsow-Inn District, KaohsiungPhone +886 / 7 / 557 42 68Fax +886 / 7 / 557 27 [email protected]
Thailandebm-papst Thailand Co. Ltd.Representative Office99/349 Chaeng Wattana Road, LaksiBangkok 10210, ThailandPhone +66 / 2 / 576 / 15 24-5Fax +66 / 2 / 576 / 15 [email protected]
United Arab Emiratesebm-papst Middle East FZEPO Box 17755Jebel Ali Free Zone / FZS1 / AP05UAE-DubaiPhone +971 / 4 / 886 08 26Fax +971 / 4 / 886 08 [email protected]
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:57 Seite 34
35
Australia
Australiaebm-papst Australia Pty Ltd.2 Silverton CloseAUS-Laverton North, Victoria, 3026Phone +61 / 3 / 83 25 64 00Fax +61 / 3 / 83 25 64 [email protected]
New Zealandebm-papst Australia Pty Ltd.102 Henderson Valley RoadNZ-Henderson, Auckland 1230Phone +64 / 9 / 837 18 84Fax +64 / 9 / 837 18 [email protected]
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:57 Seite 35
37768-7-8811 · KD-03/07-2’
ebm-papst
Mulfingen GmbH & Co. KG
Bachmühle 2
D-74673 Mulfingen
Phone +49 (0) 79 38 / 81-0
Fax +49 (0) 79 38 / 81-110
www.ebmpapst.com
Trafo_Ventilatoren_englisch:Trafo_Ventilatoren_englisch.qxd 04.06.2008 15:57 Seite 36