Spare Parts List

7/21/2019 Spare Parts List

http://slidepdf.com/reader/full/spare-parts-list-56db93117d82c 1/188

ThyssenKrupp Fördertechnik GmbH, Postfach 1463, D-59306 Ennigerloh

ThyssenKrupp Fördertechnik GmbH

Schleebergstraße 12, D-59320 EnnigerlohPhone: +49 2524 30 0Fax: +49 2524 22 52

Internet: www.eprocessingplants.com

Spare Parts List

Stat. Crushing Plant with TITAN 70D160

and RKF 2000x10,0m and RKF 1200x10,5m

Thang Long Cement - THALOFA / Vietnam

Order- No.: 2-493-20571

SPARE PARTS STOCK

Storing of the main spare and wearing parts is precondition forthe installation being in constant working order and being alwaysready for use.

Please refer to the spare parts list when ordering spare parts.

The spare parts drawings included in the spare parts listsserve for further information.

Our warranty is only restricted to original spare parts suppliedby us.

Parts which are not listed in the following spare parts listscan be delivered as spare parts on request, too.

We expressly point out that spare parts andaccessories not supplied by us are not testedand released by us for the intended use. Suchproducts being installed and used may affectconstructive features of the installation impairingoperational safety. We are not liable for damagesas a result of using other than original spare partsand accessories.

Please note that for own and foreign products often specialdelivery codes are to be observed and that we are alwaysoffering to you state-of-the-art spare parts in accordancewith the latest legal directives.

Spare parts orders shall include the following data:

Order-No.

Spare Parts List Number

Position No.

Quantity

Description

Part No.

Ers_e2

Parts List

Helical-bevel gear units 38 269 595KA107A [1], KH107A [2], KV107A [3] Page 1 of 2

No. Description DIN standard label Part No. Qt No. Description DIN standard label Part No. Qty

1 Pinion * 1 31 Key DIN6885 AB18x11x45-55HRC 0 013 549 6 1

2 Gear Wheel 2 * 1 37 Tapered Roller Bear. DIN720 323 10 0 012 124 X 1

3 Pinion shaft * 1 39 Circlip/Snap r. DIN472 110x5 0 013 018 4 14 Gear wheel * 1 40 Sealing Compound 0 910 255 8 X)

5 Pinion Shaft 5 * 1 42 Tapered Roller Bear. DIN720 323 10 0 012 124 X 1

6 Gear Wheel 6 * 1 43 Key DIN6885 B12x8x50-55HRC 0 013 510 0 1

7 Hollow. Shaft Key [1]

90 mm 0 643 262 X 1 45 Tapered Roller Bear. DIN720 323 10 0 012 124 X 1

7 IN.Hol.Shaft Key [1]

3.625 in. 0 643 284 0 1 47 Circlip/Snap r. DIN472 110x5 0 013 018 4 1

7 Holl.Shaft Shr.Disc [2] 95 mm 0 643 179 8 1 48 Spacer DIN988 S90x110x3,5 0 010 359 4 1

7 Holl.Shaft Shr.Disc [2]

95/96 mm 0 643 697 8 1 59 Screw Plug M22x1,5 0 011 431 6 7

7 Spli.Hollow Shaft [3] 85x3x30x27 0 643 402 9 1 81 O-Ring 210x3-NB 0 017 657 5 1

9 Oil Seal DIN3760 AS 118x150x12-NBR 0 011 533 9 1 83 Nilos Ring 6224 AV 0 011 803 6 1

9 Oil Seal a) h) DIN3760 AS118x150x12-FKM 0 017 609 5 1 84 Nilos Ring 6224 AV 0 011 803 6 1

10 Oil Seal b) DIN3760 A 118x150x12-NBR 0 011 555 X 1 85 Oil Seal Flange 0 643 188 7 110 Oil Seal a) b) h) DIN3760 A 118x150x12-FKM 0 017 530 7 1 91 Circlip/Snap r. [1] [3] DIN472 90x3 0 010 326 8 1

11 Deep Groove Ball Brg DIN625 6224 0 011 727 7 1 91 Circlip/Snap r. [1] DIN472 92x3 0 806 935 2 1

14 Hexagon Head Screw ISO4017 M20x40-8.8 0 012 271 8 4 92 Disc [1] 26x89x12 0 103 411 1 1

16 Oil Seal Flange 0 643 188 7 1 92 Disk (inch) [1] 13/16x3.6x1/2 in. 0 806 951 4 1

17 Distance Piece 121,6x 138x34 mm 0 643 700 1 1 92 Disc [3] 0 117 407 X 1

19 Key DIN6885 B28x16x80-55HRC 0 011 608 4 1 93 Lock Washer [1] DIN128 A 24 0 010 997 5 1

20 V t V l M22 1 5 MS 0 013 032 X 1 93 L k W h [1] DIN128 A 20 0 010 996 7 1

Parts List

95 Protection Cap [1] 91 0 114 660 2 1 168 Protection Cap [1] 91 0 114 660 2 1

95 Protection Cap [1] 91,5 0 012 777 9 1 168 Protection Cap [1] 91,5 0 012 777 9 1

95 Closing Cap [3] 90x12 0 011 162 7 1 168 Protective cap [2] 98,8 0 012 684 5 198 Shrink Disc 115x185 0 122 649 5 1 168 Closing Cap [3] 90x12 0 011 162 7 1

99 Fixed Hood Cover cpl compl. 0 643 519 X 1 183 Oil Seal DIN3760 AS 118x150x12-NBR 0 011 533 9 1

99 Fixed Hood Cover cpl cpl. h) for [2] 0 642 181 4 1 183 Oil Seal a) h) DIN3760 AS118x150x12-FKM 0 017 609 5 1

100 Gear Cover Plate 0 643 248 4 1 184 Oil Seal b) DIN3760 A 118x150x12-NBR 0 011 555 X 1

101 Hexagon Head Screw ISO4017 M10x25-8.8 0 010 116 8 10 184 Oil Seal a) b) h) DIN3760 A 118x150x12-FKM 0 017 530 7 1

102 Sealing Compound 0 910 255 8 X) 335 Torque Arm Cpl. 0 643 443 6 1

103 O-Ring 210x3-NB 0 017 657 5 1 506 Shim DIN988 90x110x0,1 0 010 382 9 X)

113 Slotted Round Nut DIN981 KM8 0 012 172 X 1 507 Shim DIN988 90x110x0,3 0 010 406 X X)

114 Multi-Tang Washer DIN5406 MB8 0 012 159 2 1 508 Shim DIN988 90x110x0,5 0 010 422 1 X)

116 Thread lock pin 0 910 242 6 1 521 Shim DIN988 185x215x0,1 0 011 336 0 X)

119 Distance Piece

63x46 mm 0 643 347 2 1 522 Shim DIN988 185x215x0,3 0 011 349 2 X)

131 Closing Cap 110x12 0 011 166 X 1 523 Shim DIN988 185x215x0,5 0 011 357 3 X)

132 Circlip/Snap r. DIN472 110x5 0 013 018 4 1 533 Shim DIN988 50x62x0,1 0 010 376 4 X)

133 Spacer DIN988 S90x110x3,5 0 010 359 4 1 534 Shim DIN988 50x62x0,3 0 010 400 0 X)

135 Nilos Ring e) 32310 AV 0 013 647 6 1 535 Shim DIN988 50x62x0,5 0 010 418 3 X)

138 Nilos Ring f) 32310 AV 0 013 647 6 1 537 Shim DIN988 50x62x0,3 0 010 400 0 X)

142 Hexagon Head Screw ISO4017 M20x40-8 8 0 012 271 8 4 538 Shim DIN988 50x62x0 5 0 010 418 3 X)

Parts List

H li l i 0 2 6 96

Helical gear units 01 276 496RF77AFor mounting to all gear unit types sizes100 [1], size 130 [2], size 120 / 140 [3]

2-stage 3-stage

1 Pinion * 1 37 Deep Groove Ball Brg DIN625 6304 0 010 508 2 1

2 Gear wheel * 1 39 Circlip/Snap r. DIN472 52x2 0 010 319 5 1

3 Pinion shaft * 1 40 Sealing Compound 0 910 255 8 X)

4 Gear wheel * 1 41 Circlip/Snap r. DIN472 47x1,75 0 010 318 7 1

5 Pinion shaft * 1 42 Deep Groove Ball Brg DIN625 6303 0 010 507 4 1

6 Gear wheel * 1 43 Key DIN6885 B 6x6x12-55HRC 0 013 483 X 1

7 Intermediate shaft 0 641 237 8 1 45 Deep Groove Ball Brg DIN625 6303 0 010 507 4 1

8 Key DIN6885 A 10x8x32-55HRC 0 010 026 9 1 47 Circlip/Snap r. DIN472 47x1,75 0 010 318 7 1

9 Oil Seal b) h) BA-SF 52x100x10/7-NBR 0 017 784 9 1 55 Hexagon head cap screw [1] ISO4017 M16x40-8.8 0 010 127 3 4

9 Oil Seal a) b) h) BA-SF52x100x10/7-FKM 0 017 824 1 1 55 Hexagon head cap screw [2] [3] ISO4017 M16x40-8.8 0 010 127 3 8

11 Deep Groove Ball Brg DIN625 6309-Z-J 0 010 526 0 1 57 Circlip/snap ring DIN471 38x1.75 0 010 282 2 1

12 Circlip/Snap r. DIN472 100x3 0 010 327 6 1 59 Screw Plug M12x1,5 0 011 430 8 5

14 Cheese head screw [1] [2] DIN912 M12x45-8.8 0 012 318 8 7 60 Screw plug [1] [2] M22x1,5 0 011 431 6 1

14 Cheese head screw [3] DIN912 M12x70-8.8 0 012 321 8 7 60 Screw plug [3] M33x2 0 011 432 4 116 Intermediate flange [1] 0 641 242 4 1 88 Circlip/Snap r. DIN471 40x1,75 0 010 283 0 1

16 Intermediate flange [2] 0 641 244 0 1 100 Gear Cover Plate 0 641 254 8 1

16 Intermediate flange [3] 0 641 246 7 1 101 Hexagon Head Screw ISO4017 M 6x16-8.8 0 010 105 2 8

17 Distance Piece

55x105 mm 0 641 238 6 1 102 Gasket 0 643 505 X 1

19 Key DIN6885 B 14x9x40-55HRC 0 010 060 9 1 131 Closing Cap 52x7 0 012 443 5 1

20 Vent Valve M12x1,5-MS 0 013 031 1 1 181 Closing Cap 24x7 0 012 444 3 1

P a r t s L i s t

A C s q u i r r e l - c a g e m o t o r s

0 8 5 3 7 0 3 0 0

D F V / D F V E 1 0 0 M + L

G e a r u n i t v e r s i o n

P a g e 1 o f 2

f l a n g e 1 2 0 f l a n g e 1 6 0 f l a n g e 2 0 0 f l a n g e 2 5 0 f l a n g e 3 0 0 f l a n g e 3 5 0

N o . D e s c r i p t i o n D I N s t a n d a r d l a b e l P a r t N o . Q t y N o . D e s c r i p t i o n D I N s t a n d a r d l a b e l P a r t N o . Q t y

R o t o r p i n . s p . 1 6

D F V 1 0 0 M - 4 0 1 3 5 3 6 3 2 1 9

S c r e w P l u g

M 2 2 x 1 , 5 0 0 1 1 4 3 1 6 1

P a r t s L i s t

0 8 5 3 7 0 3 0 0

D F V / D F V E 1 0 0 M + L

P a g e 2 o f 2

4 4 D e e p G r o o v e B a l l B r g D I N 6 2 5 6 2 0 5 - 2 Z - J - K 3 N - 2 0 0 0 1 7 4 1 6 5 1 1 0 9 R o u n d h e a d p i n I S O 8 7 4 6 2 x 4 - X 5 C r N i 1 8 - 1 2 0 0 1 0 7 6 4 6 2

H e x a g o n N u t

I S O 4 0 3 2 M 6 - 1 0 0 0 1 2 8 6 7 8 4 1 1 1 G a s k e t T e r m . B o x B a s e 0 1 3 5 5 6 3 5 1

H e x a g o n N u t

I S O 4 0 3 2 M 8 - 8 0 0 1 0 1 9 9 0 4 1 1 2 T e r m . B o x L o w e r P a r t 0 1 8 6 2 8 3 9 1

H e x a g o n N u t

I S O 4 0 3 2 M 1 0 - 8 0 0 1 0 2 0 0 8 4 1 1 3 B i n d i n g H e a d S c r e w b ) M 5 x 1 6 - T X - S T - A 2 F - G M 0 0 1 3 5 7 2 0 1

H e x a g o n N u t

I S O 4 0 3 2 M 1 2 - 8 0 0 1 0 2 0 1 6 4 1 1 5 T e r m i n a l b l o c k b ) K T M 4 0 0 1 1 7 5 9 5 1

H e x a g o n N u t

I S O 4 0 3 2 M 1 6 - 8 0 0 1 0 2 0 3 2 4 1 1 6 T e r m i n a l C l a m p D I N 4 6 2 8 2 C 1 0 - M s - v n 0 0 1 0 4 4 2 6 2

Parts List

1 Pinion * 1 31 Key DIN6885 AB18x11x45-55HRC 0 013 549 6 1

2 Gear Wheel 2 * 1 37 Tapered Roller Bear. DIN720 323 10 0 012 124 X 1

3 Pinion shaft * 1 39 Circlip/Snap r. DIN472 110x5 0 013 018 4 1

4 Gear wheel * 1 40 Sealing Compound 0 910 255 8 X)

5 Pinion Shaft 5 * 1 42 Tapered Roller Bear. DIN720 323 10 0 012 124 X 1

6 Gear Wheel 6 * 1 43 Key DIN6885 B12x8x50-55HRC 0 013 510 0 1

7 Hollow. Shaft Key [1]

90 mm 0 643 262 X 1 45 Tapered Roller Bear. DIN720 323 10 0 012 124 X 1

7 IN.Hol.Shaft Key [1]

3.625 in. 0 643 284 0 1 47 Circlip/Snap r. DIN472 110x5 0 013 018 4 1

7 Holl.Shaft Shr.Disc [2] 95 mm 0 643 179 8 1 48 Spacer DIN988 S90x110x3,5 0 010 359 4 1

7 Holl.Shaft Shr.Disc [2]

95/96 mm 0 643 697 8 1 59 Screw Plug M22x1,5 0 011 431 6 7

7 Spli.Hollow Shaft [3] 85x3x30x27 0 643 402 9 1 81 O-Ring 210x3-NB 0 017 657 5 1

9 Oil Seal DIN3760 AS 118x150x12-NBR 0 011 533 9 1 83 Nilos Ring 6224 AV 0 011 803 6 1

9 Oil Seal a) h) DIN3760 AS118x150x12-FKM 0 017 609 5 1 84 Nilos Ring 6224 AV 0 011 803 6 1

10 Oil Seal b) DIN3760 A 118x150x12-NBR 0 011 555 X 1 85 Oil Seal Flange 0 643 188 7 1

10 Oil Seal a) b) h) DIN3760 A 118x150x12-FKM 0 017 530 7 1 91 Circlip/Snap r. [1] [3] DIN472 90x3 0 010 326 8 1

11 Deep Groove Ball Brg DIN625 6224 0 011 727 7 1 91 Circlip/Snap r. [1] DIN472 92x3 0 806 935 2 114 Hexagon Head Screw ISO4017 M20x40-8.8 0 012 271 8 4 92 Disc [1] 26x89x12 0 103 411 1 1

16 Oil Seal Flange 0 643 188 7 1 92 Disk (inch) [1] 13/16x3.6x1/2 in. 0 806 951 4 1

17 Distance Piece 121,6x 138x34 mm 0 643 700 1 1 92 Disc [3] 0 117 407 X 1

19 Key DIN6885 B28x16x80-55HRC 0 011 608 4 1 93 Lock Washer [1] DIN128 A 24 0 010 997 5 1

20 V t V l M22 1 5 MS 0 013 032 X 1 93 L k W h [1] DIN128 A 20 0 010 996 7 1

Parts List

95 Protection Cap [1] 91 0 114 660 2 1 168 Protection Cap [1] 91 0 114 660 2 1

95 Protection Cap [1] 91,5 0 012 777 9 1 168 Protection Cap [1] 91,5 0 012 777 9 1

95 Closing Cap [3] 90x12 0 011 162 7 1 168 Protective cap [2] 98,8 0 012 684 5 1

98 Shrink Disc 115x185 0 122 649 5 1 168 Closing Cap [3] 90x12 0 011 162 7 1