21
Β Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο Κωνσταντάρας Όνομα Ιωάννης Όνομα πατρός Γεώργιος Ημερομηνία γέννησης 08 Οκτωβρίου 1976 Τόπος γέννησης Κορυδαλλός-Αττικής Υπηκοότητα Ελληνική Αρ. Δ.Α.Τ. Α Η 738603 Οικογενειακή Κατάσταση Έγγαμος με μία κόρη Στρατιωτική θητεία Εκπληρωμένη Διεύθυνση μόνιμης κατοικίας Χρήστου Σούλη 1, Τ.Κ. 45 332, Ιωάννινα Τηλέφωνο και Fax 2651067662 Κινητό 6944106571 Ε- mail [email protected], [email protected] 2. Σπουδές Δεκέμβριος 2001 – Μάιος 2006 Διδακτορικό Δίπλωμα στην Επιχειρησιακή Έρευνα Τίτλος: «Βέλτιστες Πολιτικές Διαχείρισης Αποθεμάτων στην Αντίστροφη Εφοδιαστική Αλυσίδα» Πανεπιστήμιο Ιωαννίνων Σχολή Θετικών Επιστημών Τμήμα Μαθηματικών Τομέας Πιθανοτήτων, Στατιστικής & Επιχειρησιακής Έρευνας Οκτώβριος 1999 – Νοέμβριος 2001 Μεταπτυχιακό Δίπλωμα Ειδίκευσης στη Στατιστική και Επιχειρησιακή Έρευνα Πανεπιστήμιο Ιωαννίνων Σχολή Θετικών Επιστημών Τμήμα Μαθηματικών Τομέας Πιθανοτήτων, Στατιστικής & Επιχειρησιακής Έρευνας Σεπτέμβριος 1994– Μάρτιος 1999 Πτυχίο Μαθηματικών Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης Σχολή Θετικών Επιστημών Τμήμα Μαθηματικών Βαθμός Λίαν Καλώς (7.56) 3. Διακρίσεις 1). 1 ος στη σειρά αποφοιτήσεως του Τμήματος Μαθηματικών και της Σχολής Θετικών Επιστημών του Α.Π.Θ με Βαθμό Λίαν Καλώς (7.56). 2). Με βάση την εργασία, “Optimal policy for pricing, return and modularity level in build-to-order products” επιλέχθηκα να συμμετάσχω στο 11 ο European Logistics Association (ELA) Doctorate Workshop που έλαβε χώρα στο Grainau στην Γερμανία από 28 έως 30 Ιουνίου 2006.

BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

  • Upload
    others

  • View
    7

  • Download
    0

Embed Size (px)

Citation preview

Page 1: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Β Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α

1 Προσωπικά Στοιχεία

Επώνυμο ΚωνσταντάραςΌνομα ΙωάννηςΌνομα πατρός ΓεώργιοςΗμερομηνία γέννησης 08 Οκτωβρίου 1976Τόπος γέννησης Κορυδαλλός-ΑττικήςΥπηκοότητα ΕλληνικήΑρ ΔΑΤ Α Η 738603Οικογενειακή Κατάσταση Έγγαμος με μία κόρηΣτρατιωτική θητεία ΕκπληρωμένηΔιεύθυνση μόνιμης κατοικίας Χρήστου Σούλη 1 ΤΚ 45 332 ΙωάννιναΤηλέφωνο και Fax 2651067662Κινητό 6944106571Ε- mail ikonstccuoigr ikonstantarasgmailcom

2 Σπουδές

Δεκέμβριος 2001 ndashΜάιος 2006

Διδακτορικό Δίπλωμα στην Επιχειρησιακή ΈρευναΤίτλος laquoΒέλτιστες Πολιτικές Διαχείρισης Αποθεμάτων στηνΑντίστροφη Εφοδιαστική ΑλυσίδαraquoΠανεπιστήμιο ΙωαννίνωνΣχολή Θετικών ΕπιστημώνΤμήμα ΜαθηματικώνΤομέας Πιθανοτήτων Στατιστικής amp Επιχειρησιακής Έρευνας

Οκτώβριος 1999 ndashΝοέμβριος 2001

Μεταπτυχιακό Δίπλωμα Ειδίκευσης στη Στατιστική καιΕπιχειρησιακή ΈρευναΠανεπιστήμιο ΙωαννίνωνΣχολή Θετικών ΕπιστημώνΤμήμα ΜαθηματικώνΤομέας Πιθανοτήτων Στατιστικής amp Επιχειρησιακής Έρευνας

Σεπτέμβριος 1994ndashΜάρτιος 1999

Πτυχίο ΜαθηματικώνΑριστοτέλειο Πανεπιστήμιο ΘεσσαλονίκηςΣχολή Θετικών ΕπιστημώνΤμήμα ΜαθηματικώνΒαθμός Λίαν Καλώς (756)

3 Διακρίσεις

1) 1ος στη σειρά αποφοιτήσεως του Τμήματος Μαθηματικών και της Σχολής Θετικών Επιστημών

του ΑΠΘ με Βαθμό Λίαν Καλώς (756)

2) Με βάση την εργασία ldquoOptimal policy for pricing return and modularity level in build-to-order

productsrdquo επιλέχθηκα να συμμετάσχω στο 11ο European Logistics Association (ELA) Doctorate

Workshop που έλαβε χώρα στο Grainau στην Γερμανία από 28 έως 30 Ιουνίου 2006

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 2 από 21

4 Ερευνητική δραστηριότητα

α Διατριβές

1 Ι Κωνσταντάρας ldquoΟ αλγόριθμος των W-W (Wagner and Whitin) και το μοντέλο EOQ για την

Αντίστροφη Εφοδιαστική Αλυσίδα Μεταπτυχιακή διατριβή Μεταπτυχιακού Διπλώματος

Ειδίκευσης Πανεπιστήμιο Ιωαννίνων Νοέμβριος 2001

2 Ι Κωνσταντάρας ldquoΒέλτιστες Πολιτικές Διαχείρισης Αποθεμάτων στην Αντίστροφη

Εφοδιαστική Αλυσίδαrdquo Διδακτορική διατριβή Πανεπιστήμιο Ιωαννίνων Μάιος 2006

β Δημοσιεύσεις σε Επιστημονικά Περιοδικά με Κριτές

1 S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154 (I F 2068

αριθμ ετερεοαναφορών 59)

2 I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045 (I F 0803

αριθμ ετερεοαναφορών 20)

3 I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European

Journal of Operational Research 178(2) 433-448 (I F 2093 αριθμ ετερεοαναφορών 17)

4 I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item

with imperfect quality subject to the in-house inspection International Journal of Systems

Science 38(6) 473-482 (I F 0918 αριθμ ετερεοαναφορών 6)

5 I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an

inventory system with product recovery International Journal of Production Economics 111(2)

707-712 (I F 2068 αριθμ ετερεοαναφορών 9)

6 K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92 (I F 2093 αριθμ ετερεοαναφορών 15)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 3 από 21

7 I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734 (I F 1491 αριθμ

ετερεοαναφορών 4)

8 I Konstantaras and KSkouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335 (I F 2093 αριθμ

ετερεοαναφορών 1)

9 K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical

Problems in Engineering 2009 article ID 679736 24 pages doi1011552009679736 (I F

0553 αριθμ ετερεοαναφορών 1)

10 I Konstantaras KSkouri and M Jaber (2010) Lot sizing for a recoverable product with

inspection and sorting Computers amp Industrial Engineering 58(3) 452-462 (I F 1491)

11 I Konstantaras K Skouri S Papachristos (2009) Optimal pricing return and modular design

policy for Build-To-Order (BTO) products in a two parties supply chain system IMA Journal of

Management Mathematics article in press doi 101093imamandpp023

12 I Konstantaras and K Skouri (2010) A note on a production-inventory model under stock-

dependent demand Weibull distribution deterioration and shortage International Transactions in

Operational Research corrected proof doi 101111j1475-3995201000765x

13 I Konstantaras (2010) Optimal control of production and remanufacturing in a reverse logistics

model with backlogging accepted for publication in Mathematical Problems in Engineering

γ Εργασίες που έχουν υποβληθεί σε Επιστημονικά Περιοδικά με Κριτές

1 K Skouri and I Konstantaras (2010) Two warehouse inventory model for deteriorating

seasonable products with ramp type demand rate submitted to SIAM Journal on Control and

Optimization (under review)

2 KSkouri I Konstantaras S Papachristos and J Teng (2010) Supply chain models for

deteriorating products with ramp type demand rate under permissible delay in payments

submitted to Expert Systems with Applications (under review)

3 I Konstantaras K Skouri S K Manna and K S Chaudhuri (2010) Supply chain models with

ramp type demand rate time dependent deterioration rate unit production cost and shortages

submitted to Annals of Operations Research (under review)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 4 από 21

4 K Skouri and I Konstantaras (2010) A note on ldquoAn EOQ model with ramp type demand rate

time dependent deterioration rate unit production cost and shortages submitted to International

Journal of Production Economics (under review)

δ Δημοσιεύσεις σε Πρακτικά Επιστημονικών Συνεδρίων με Κριτές

1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας Πρακτικά 14ου Εθνικού Συνεδρίου

Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging in Proceedings of 18th International Conference on

Production Research Salerno Italy 31 July-04 August 2005

3 I Konstantaras K Skouri and S Papachristos Optimal policy for pricing return and modularity

level for Build-To-Order (BTO) products in 11th European Logistics Association (ELA) Doctorate

Workshop 2006 Proceedings 22-36

ε Ανακοινώσεις σε Συνέδρια1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος An inventory model with ramp type demand

partial backlogging and Weibull deterioration rate 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου 2005

3 Ι Γκανάς Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος Design modularity and return

policy for Build-to-Order (BTO) products 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου 2005

4 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging 18th International Conference on Production Research

University of Salerno Salerno Italy 31 July-04 August 2005

5 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 14th International Working Seminar on Production

Economics Innsbruck 20-24 February 2006

6 I Konstantaras S Papachristos K Skouri Optimal policy for pricing return and modularity

level in build-to-order products 11th European Logistics Association (ELA) Doctorate Workshop

Grainau Germany 28-30 June 2006

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 5 από 21

7 K Skouri I Konstantaras S Papachristos and I Ganas An order level inventory system with

ramp type demand rate partial backlogging and Weibull deterioration rate 14th International

Symposium on Inventories Budapest August 21-25 2006

8 K Skouri S Papachristos I Konstantaras and I Ganas Inventory models for deteriorating items

with ramp type demand rate partial backlogging and permissible delay in payments 19ο Εθνικό

Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου 2007

9 K Skouri S Papachristos I Konstantaras and I Ganas An inventory model for deteriorating

items with ramp type demand rate partial backlogging and permissible delay in payments 22nd

European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 22nd European Conference on Operational

Research EURO XXII Prague July 8-11 2007

11 K Skouri I Konstantaras and S Papachristos Two warehouse inventory models for

deteriorating seasonable products with ramp type demand rate 15th International Symposium on

Inventories Budapest August 22-26 2008

12 K Skouri A Lagodimos and I Konstantaras Periodic review (R T) inventory control policy for

stochastic demand and yield 3rd meeting of the EURO Working Group on Stochastic Modelling

June 7-9 2010 Nafplio Greece

στ Επιμόρφωση - Συμμετοχή σε Συνέδρια amp Σεμινάρια1 1ο Ειδικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών ldquoΗ Ανάπτυξη του

Πρωτογενούς Τομέα τον 21ο Αιώνα Η Συμβολή της Επιστήμης του Managementrdquo Ιωάννινα 29 -

31 Οκτωβρίου 1999

2 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03

Νοεμβρίου 2001

3 15ο Πανελλήνιο Συνέδριο Στατιστικής Ιωάννινα 8 - 11 Μαΐου 2002

4 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου

2005

5 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου

2005

6 18th International Conference on Production Research University of Salerno Salerno Italy 31

July-04 August 2005

7 11th European Logistics Association (ELA) Doctorate Workshop Grainau Germany 28-30 June

2006

8 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου

2007

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 6 από 21

9 22nd European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 15th International Symposium on Inventories Budapest August 22-26 2008

ζ Τεχνικές Αναφορές (Technical Reports)

1 S Papachristos and I Konstantaras The reverse WagnerWhitin model with remanufacturing and

manufacturing options Exact results and holding cost stability regions University of Ioannina

Dept of Mathematics Technical Report No 10 December 2003

Σημείωση 1 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό European

Journal of Operational Research (βλέπε ενότητα 4β3)

2 I Konstantaras and S Papachristos Note on Lot-sizing for inventory systems with product

recovery University of Ioannina Dept of Mathematics Technical Report No 13 December 2004

Σημείωση 2 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Economics (βλέπε ενότητα 4β5)

3 I Konstantaras and S Papachristos Lot sizing in a production system with shortages and product

remanufacturing University of Ioannina Dept of Mathematics Technical Report No 15

December 2005

Σημείωση 3 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Research (βλέπε ενότητα 4β2)

5 Διδακτικό Έργο - Εκπαιδευτική Εμπειρία

Ακαδ Έτος19992000 -Ακαδ Έτος20052006

Επιστημονικός - Εργαστηριακός συνεργάτης του ΤΕΙ ΗπείρουΜαθηματικά Ι (εργαστ) Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Ακ Έτος 1999-2000

Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής amp Διοίκησης Ακ Έτος 20002001

Μαθηματικά Ι (εργαστ) και Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Στατιστική Επιχειρήσεων (θεωρία και εργαστ) και Ποσοτική Ανάλυσηστα Χρηματοπιστωτικά Ιδρ (Θεωρία και εργαστ) Τμήμα Ελεγκτικής καιΑσφαλιστικής Ακ Έτος 2001-2002

Στατιστική (θεωρία και Ασκήσεις πρ) Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΕισαγωγή στους ΗΥ και στη Στατιστική Τμήμα Λογοθεραπείας Ακ Έτος 2002-2003

Στατιστική (θεωρία και Ασκήσεις πρ) και Βάσεις Δεδομένων (εργαστ) ΤμήμαΤηλεπληροφορικής amp Διοίκησης Ακ Έτος 2003-2004

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20042005

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 7 από 21

Ακαδ Έτος20072008

Ακαδ Έτος20082009

Ακαδ Έτος20092010

Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20052006

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία) Τμήμα Λογοθεραπείας ΤΕΙΗπείρου

01032004-31082004

23112007-31082008

01032008-31082008

01102008-31082009

01102008-31032009

17032009-31082009

30102009-31082010

Παροχή επικουρικού έργου στη διδασκαλία του μαθήματος laquoΣτατιστικές Μέθοδοιμε εφαρμογή στις Βιολογικές Επιστήμεςraquo στα εργαστήρια του ΤμήματοςΒιολογικών εφαρμογών και Τεχνολογιών του Πανεπιστημίου Ιωαννίνων

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΓενικά Μαθηματικά Ι Τμήμα Χημικό (1ο εξάμηνο χειμερινό)Γενικά Μαθηματικά ΙΙ Τμήμα Χημικό (2ο εξάμηνο εαρινό)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndash υποχρεωτικό τουΗ΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Στατιστική Συμπερασμοτολογία Τμήμα Μαθηματικών (εαρινό εξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στη Στρατιωτική Σχολή Ευελπίδων με σχέση εργασίας ιδιωτικού δικαίουορισμένου χρόνου (βάσει του ΠΔ 40780) Αυτοδύναμη Διδασκαλία τουμαθήματοςΕπιχειρησιακή Έρευνα και Στρατιωτικές Εφαρμογές Αυτής (χειμερινό εξάμηνο)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndashυποχρεωτικό του Η΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 2: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 2 από 21

4 Ερευνητική δραστηριότητα

α Διατριβές

1 Ι Κωνσταντάρας ldquoΟ αλγόριθμος των W-W (Wagner and Whitin) και το μοντέλο EOQ για την

Αντίστροφη Εφοδιαστική Αλυσίδα Μεταπτυχιακή διατριβή Μεταπτυχιακού Διπλώματος

Ειδίκευσης Πανεπιστήμιο Ιωαννίνων Νοέμβριος 2001

2 Ι Κωνσταντάρας ldquoΒέλτιστες Πολιτικές Διαχείρισης Αποθεμάτων στην Αντίστροφη

Εφοδιαστική Αλυσίδαrdquo Διδακτορική διατριβή Πανεπιστήμιο Ιωαννίνων Μάιος 2006

β Δημοσιεύσεις σε Επιστημονικά Περιοδικά με Κριτές

1 S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154 (I F 2068

αριθμ ετερεοαναφορών 59)

2 I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045 (I F 0803

αριθμ ετερεοαναφορών 20)

3 I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European

Journal of Operational Research 178(2) 433-448 (I F 2093 αριθμ ετερεοαναφορών 17)

4 I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item

with imperfect quality subject to the in-house inspection International Journal of Systems

Science 38(6) 473-482 (I F 0918 αριθμ ετερεοαναφορών 6)

5 I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an

inventory system with product recovery International Journal of Production Economics 111(2)

707-712 (I F 2068 αριθμ ετερεοαναφορών 9)

6 K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92 (I F 2093 αριθμ ετερεοαναφορών 15)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 3 από 21

7 I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734 (I F 1491 αριθμ

ετερεοαναφορών 4)

8 I Konstantaras and KSkouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335 (I F 2093 αριθμ

ετερεοαναφορών 1)

9 K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical

Problems in Engineering 2009 article ID 679736 24 pages doi1011552009679736 (I F

0553 αριθμ ετερεοαναφορών 1)

10 I Konstantaras KSkouri and M Jaber (2010) Lot sizing for a recoverable product with

inspection and sorting Computers amp Industrial Engineering 58(3) 452-462 (I F 1491)

11 I Konstantaras K Skouri S Papachristos (2009) Optimal pricing return and modular design

policy for Build-To-Order (BTO) products in a two parties supply chain system IMA Journal of

Management Mathematics article in press doi 101093imamandpp023

12 I Konstantaras and K Skouri (2010) A note on a production-inventory model under stock-

dependent demand Weibull distribution deterioration and shortage International Transactions in

Operational Research corrected proof doi 101111j1475-3995201000765x

13 I Konstantaras (2010) Optimal control of production and remanufacturing in a reverse logistics

model with backlogging accepted for publication in Mathematical Problems in Engineering

γ Εργασίες που έχουν υποβληθεί σε Επιστημονικά Περιοδικά με Κριτές

1 K Skouri and I Konstantaras (2010) Two warehouse inventory model for deteriorating

seasonable products with ramp type demand rate submitted to SIAM Journal on Control and

Optimization (under review)

2 KSkouri I Konstantaras S Papachristos and J Teng (2010) Supply chain models for

deteriorating products with ramp type demand rate under permissible delay in payments

submitted to Expert Systems with Applications (under review)

3 I Konstantaras K Skouri S K Manna and K S Chaudhuri (2010) Supply chain models with

ramp type demand rate time dependent deterioration rate unit production cost and shortages

submitted to Annals of Operations Research (under review)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 4 από 21

4 K Skouri and I Konstantaras (2010) A note on ldquoAn EOQ model with ramp type demand rate

time dependent deterioration rate unit production cost and shortages submitted to International

Journal of Production Economics (under review)

δ Δημοσιεύσεις σε Πρακτικά Επιστημονικών Συνεδρίων με Κριτές

1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας Πρακτικά 14ου Εθνικού Συνεδρίου

Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging in Proceedings of 18th International Conference on

Production Research Salerno Italy 31 July-04 August 2005

3 I Konstantaras K Skouri and S Papachristos Optimal policy for pricing return and modularity

level for Build-To-Order (BTO) products in 11th European Logistics Association (ELA) Doctorate

Workshop 2006 Proceedings 22-36

ε Ανακοινώσεις σε Συνέδρια1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος An inventory model with ramp type demand

partial backlogging and Weibull deterioration rate 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου 2005

3 Ι Γκανάς Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος Design modularity and return

policy for Build-to-Order (BTO) products 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου 2005

4 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging 18th International Conference on Production Research

University of Salerno Salerno Italy 31 July-04 August 2005

5 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 14th International Working Seminar on Production

Economics Innsbruck 20-24 February 2006

6 I Konstantaras S Papachristos K Skouri Optimal policy for pricing return and modularity

level in build-to-order products 11th European Logistics Association (ELA) Doctorate Workshop

Grainau Germany 28-30 June 2006

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 5 από 21

7 K Skouri I Konstantaras S Papachristos and I Ganas An order level inventory system with

ramp type demand rate partial backlogging and Weibull deterioration rate 14th International

Symposium on Inventories Budapest August 21-25 2006

8 K Skouri S Papachristos I Konstantaras and I Ganas Inventory models for deteriorating items

with ramp type demand rate partial backlogging and permissible delay in payments 19ο Εθνικό

Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου 2007

9 K Skouri S Papachristos I Konstantaras and I Ganas An inventory model for deteriorating

items with ramp type demand rate partial backlogging and permissible delay in payments 22nd

European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 22nd European Conference on Operational

Research EURO XXII Prague July 8-11 2007

11 K Skouri I Konstantaras and S Papachristos Two warehouse inventory models for

deteriorating seasonable products with ramp type demand rate 15th International Symposium on

Inventories Budapest August 22-26 2008

12 K Skouri A Lagodimos and I Konstantaras Periodic review (R T) inventory control policy for

stochastic demand and yield 3rd meeting of the EURO Working Group on Stochastic Modelling

June 7-9 2010 Nafplio Greece

στ Επιμόρφωση - Συμμετοχή σε Συνέδρια amp Σεμινάρια1 1ο Ειδικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών ldquoΗ Ανάπτυξη του

Πρωτογενούς Τομέα τον 21ο Αιώνα Η Συμβολή της Επιστήμης του Managementrdquo Ιωάννινα 29 -

31 Οκτωβρίου 1999

2 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03

Νοεμβρίου 2001

3 15ο Πανελλήνιο Συνέδριο Στατιστικής Ιωάννινα 8 - 11 Μαΐου 2002

4 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου

2005

5 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου

2005

6 18th International Conference on Production Research University of Salerno Salerno Italy 31

July-04 August 2005

7 11th European Logistics Association (ELA) Doctorate Workshop Grainau Germany 28-30 June

2006

8 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου

2007

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 6 από 21

9 22nd European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 15th International Symposium on Inventories Budapest August 22-26 2008

ζ Τεχνικές Αναφορές (Technical Reports)

1 S Papachristos and I Konstantaras The reverse WagnerWhitin model with remanufacturing and

manufacturing options Exact results and holding cost stability regions University of Ioannina

Dept of Mathematics Technical Report No 10 December 2003

Σημείωση 1 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό European

Journal of Operational Research (βλέπε ενότητα 4β3)

2 I Konstantaras and S Papachristos Note on Lot-sizing for inventory systems with product

recovery University of Ioannina Dept of Mathematics Technical Report No 13 December 2004

Σημείωση 2 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Economics (βλέπε ενότητα 4β5)

3 I Konstantaras and S Papachristos Lot sizing in a production system with shortages and product

remanufacturing University of Ioannina Dept of Mathematics Technical Report No 15

December 2005

Σημείωση 3 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Research (βλέπε ενότητα 4β2)

5 Διδακτικό Έργο - Εκπαιδευτική Εμπειρία

Ακαδ Έτος19992000 -Ακαδ Έτος20052006

Επιστημονικός - Εργαστηριακός συνεργάτης του ΤΕΙ ΗπείρουΜαθηματικά Ι (εργαστ) Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Ακ Έτος 1999-2000

Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής amp Διοίκησης Ακ Έτος 20002001

Μαθηματικά Ι (εργαστ) και Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Στατιστική Επιχειρήσεων (θεωρία και εργαστ) και Ποσοτική Ανάλυσηστα Χρηματοπιστωτικά Ιδρ (Θεωρία και εργαστ) Τμήμα Ελεγκτικής καιΑσφαλιστικής Ακ Έτος 2001-2002

Στατιστική (θεωρία και Ασκήσεις πρ) Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΕισαγωγή στους ΗΥ και στη Στατιστική Τμήμα Λογοθεραπείας Ακ Έτος 2002-2003

Στατιστική (θεωρία και Ασκήσεις πρ) και Βάσεις Δεδομένων (εργαστ) ΤμήμαΤηλεπληροφορικής amp Διοίκησης Ακ Έτος 2003-2004

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20042005

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 7 από 21

Ακαδ Έτος20072008

Ακαδ Έτος20082009

Ακαδ Έτος20092010

Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20052006

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία) Τμήμα Λογοθεραπείας ΤΕΙΗπείρου

01032004-31082004

23112007-31082008

01032008-31082008

01102008-31082009

01102008-31032009

17032009-31082009

30102009-31082010

Παροχή επικουρικού έργου στη διδασκαλία του μαθήματος laquoΣτατιστικές Μέθοδοιμε εφαρμογή στις Βιολογικές Επιστήμεςraquo στα εργαστήρια του ΤμήματοςΒιολογικών εφαρμογών και Τεχνολογιών του Πανεπιστημίου Ιωαννίνων

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΓενικά Μαθηματικά Ι Τμήμα Χημικό (1ο εξάμηνο χειμερινό)Γενικά Μαθηματικά ΙΙ Τμήμα Χημικό (2ο εξάμηνο εαρινό)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndash υποχρεωτικό τουΗ΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Στατιστική Συμπερασμοτολογία Τμήμα Μαθηματικών (εαρινό εξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στη Στρατιωτική Σχολή Ευελπίδων με σχέση εργασίας ιδιωτικού δικαίουορισμένου χρόνου (βάσει του ΠΔ 40780) Αυτοδύναμη Διδασκαλία τουμαθήματοςΕπιχειρησιακή Έρευνα και Στρατιωτικές Εφαρμογές Αυτής (χειμερινό εξάμηνο)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndashυποχρεωτικό του Η΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 3: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 3 από 21

7 I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734 (I F 1491 αριθμ

ετερεοαναφορών 4)

8 I Konstantaras and KSkouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335 (I F 2093 αριθμ

ετερεοαναφορών 1)

9 K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical

Problems in Engineering 2009 article ID 679736 24 pages doi1011552009679736 (I F

0553 αριθμ ετερεοαναφορών 1)

10 I Konstantaras KSkouri and M Jaber (2010) Lot sizing for a recoverable product with

inspection and sorting Computers amp Industrial Engineering 58(3) 452-462 (I F 1491)

11 I Konstantaras K Skouri S Papachristos (2009) Optimal pricing return and modular design

policy for Build-To-Order (BTO) products in a two parties supply chain system IMA Journal of

Management Mathematics article in press doi 101093imamandpp023

12 I Konstantaras and K Skouri (2010) A note on a production-inventory model under stock-

dependent demand Weibull distribution deterioration and shortage International Transactions in

Operational Research corrected proof doi 101111j1475-3995201000765x

13 I Konstantaras (2010) Optimal control of production and remanufacturing in a reverse logistics

model with backlogging accepted for publication in Mathematical Problems in Engineering

γ Εργασίες που έχουν υποβληθεί σε Επιστημονικά Περιοδικά με Κριτές

1 K Skouri and I Konstantaras (2010) Two warehouse inventory model for deteriorating

seasonable products with ramp type demand rate submitted to SIAM Journal on Control and

Optimization (under review)

2 KSkouri I Konstantaras S Papachristos and J Teng (2010) Supply chain models for

deteriorating products with ramp type demand rate under permissible delay in payments

submitted to Expert Systems with Applications (under review)

3 I Konstantaras K Skouri S K Manna and K S Chaudhuri (2010) Supply chain models with

ramp type demand rate time dependent deterioration rate unit production cost and shortages

submitted to Annals of Operations Research (under review)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 4 από 21

4 K Skouri and I Konstantaras (2010) A note on ldquoAn EOQ model with ramp type demand rate

time dependent deterioration rate unit production cost and shortages submitted to International

Journal of Production Economics (under review)

δ Δημοσιεύσεις σε Πρακτικά Επιστημονικών Συνεδρίων με Κριτές

1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας Πρακτικά 14ου Εθνικού Συνεδρίου

Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging in Proceedings of 18th International Conference on

Production Research Salerno Italy 31 July-04 August 2005

3 I Konstantaras K Skouri and S Papachristos Optimal policy for pricing return and modularity

level for Build-To-Order (BTO) products in 11th European Logistics Association (ELA) Doctorate

Workshop 2006 Proceedings 22-36

ε Ανακοινώσεις σε Συνέδρια1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος An inventory model with ramp type demand

partial backlogging and Weibull deterioration rate 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου 2005

3 Ι Γκανάς Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος Design modularity and return

policy for Build-to-Order (BTO) products 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου 2005

4 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging 18th International Conference on Production Research

University of Salerno Salerno Italy 31 July-04 August 2005

5 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 14th International Working Seminar on Production

Economics Innsbruck 20-24 February 2006

6 I Konstantaras S Papachristos K Skouri Optimal policy for pricing return and modularity

level in build-to-order products 11th European Logistics Association (ELA) Doctorate Workshop

Grainau Germany 28-30 June 2006

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 5 από 21

7 K Skouri I Konstantaras S Papachristos and I Ganas An order level inventory system with

ramp type demand rate partial backlogging and Weibull deterioration rate 14th International

Symposium on Inventories Budapest August 21-25 2006

8 K Skouri S Papachristos I Konstantaras and I Ganas Inventory models for deteriorating items

with ramp type demand rate partial backlogging and permissible delay in payments 19ο Εθνικό

Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου 2007

9 K Skouri S Papachristos I Konstantaras and I Ganas An inventory model for deteriorating

items with ramp type demand rate partial backlogging and permissible delay in payments 22nd

European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 22nd European Conference on Operational

Research EURO XXII Prague July 8-11 2007

11 K Skouri I Konstantaras and S Papachristos Two warehouse inventory models for

deteriorating seasonable products with ramp type demand rate 15th International Symposium on

Inventories Budapest August 22-26 2008

12 K Skouri A Lagodimos and I Konstantaras Periodic review (R T) inventory control policy for

stochastic demand and yield 3rd meeting of the EURO Working Group on Stochastic Modelling

June 7-9 2010 Nafplio Greece

στ Επιμόρφωση - Συμμετοχή σε Συνέδρια amp Σεμινάρια1 1ο Ειδικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών ldquoΗ Ανάπτυξη του

Πρωτογενούς Τομέα τον 21ο Αιώνα Η Συμβολή της Επιστήμης του Managementrdquo Ιωάννινα 29 -

31 Οκτωβρίου 1999

2 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03

Νοεμβρίου 2001

3 15ο Πανελλήνιο Συνέδριο Στατιστικής Ιωάννινα 8 - 11 Μαΐου 2002

4 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου

2005

5 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου

2005

6 18th International Conference on Production Research University of Salerno Salerno Italy 31

July-04 August 2005

7 11th European Logistics Association (ELA) Doctorate Workshop Grainau Germany 28-30 June

2006

8 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου

2007

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 6 από 21

9 22nd European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 15th International Symposium on Inventories Budapest August 22-26 2008

ζ Τεχνικές Αναφορές (Technical Reports)

1 S Papachristos and I Konstantaras The reverse WagnerWhitin model with remanufacturing and

manufacturing options Exact results and holding cost stability regions University of Ioannina

Dept of Mathematics Technical Report No 10 December 2003

Σημείωση 1 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό European

Journal of Operational Research (βλέπε ενότητα 4β3)

2 I Konstantaras and S Papachristos Note on Lot-sizing for inventory systems with product

recovery University of Ioannina Dept of Mathematics Technical Report No 13 December 2004

Σημείωση 2 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Economics (βλέπε ενότητα 4β5)

3 I Konstantaras and S Papachristos Lot sizing in a production system with shortages and product

remanufacturing University of Ioannina Dept of Mathematics Technical Report No 15

December 2005

Σημείωση 3 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Research (βλέπε ενότητα 4β2)

5 Διδακτικό Έργο - Εκπαιδευτική Εμπειρία

Ακαδ Έτος19992000 -Ακαδ Έτος20052006

Επιστημονικός - Εργαστηριακός συνεργάτης του ΤΕΙ ΗπείρουΜαθηματικά Ι (εργαστ) Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Ακ Έτος 1999-2000

Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής amp Διοίκησης Ακ Έτος 20002001

Μαθηματικά Ι (εργαστ) και Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Στατιστική Επιχειρήσεων (θεωρία και εργαστ) και Ποσοτική Ανάλυσηστα Χρηματοπιστωτικά Ιδρ (Θεωρία και εργαστ) Τμήμα Ελεγκτικής καιΑσφαλιστικής Ακ Έτος 2001-2002

Στατιστική (θεωρία και Ασκήσεις πρ) Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΕισαγωγή στους ΗΥ και στη Στατιστική Τμήμα Λογοθεραπείας Ακ Έτος 2002-2003

Στατιστική (θεωρία και Ασκήσεις πρ) και Βάσεις Δεδομένων (εργαστ) ΤμήμαΤηλεπληροφορικής amp Διοίκησης Ακ Έτος 2003-2004

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20042005

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 7 από 21

Ακαδ Έτος20072008

Ακαδ Έτος20082009

Ακαδ Έτος20092010

Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20052006

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία) Τμήμα Λογοθεραπείας ΤΕΙΗπείρου

01032004-31082004

23112007-31082008

01032008-31082008

01102008-31082009

01102008-31032009

17032009-31082009

30102009-31082010

Παροχή επικουρικού έργου στη διδασκαλία του μαθήματος laquoΣτατιστικές Μέθοδοιμε εφαρμογή στις Βιολογικές Επιστήμεςraquo στα εργαστήρια του ΤμήματοςΒιολογικών εφαρμογών και Τεχνολογιών του Πανεπιστημίου Ιωαννίνων

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΓενικά Μαθηματικά Ι Τμήμα Χημικό (1ο εξάμηνο χειμερινό)Γενικά Μαθηματικά ΙΙ Τμήμα Χημικό (2ο εξάμηνο εαρινό)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndash υποχρεωτικό τουΗ΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Στατιστική Συμπερασμοτολογία Τμήμα Μαθηματικών (εαρινό εξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στη Στρατιωτική Σχολή Ευελπίδων με σχέση εργασίας ιδιωτικού δικαίουορισμένου χρόνου (βάσει του ΠΔ 40780) Αυτοδύναμη Διδασκαλία τουμαθήματοςΕπιχειρησιακή Έρευνα και Στρατιωτικές Εφαρμογές Αυτής (χειμερινό εξάμηνο)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndashυποχρεωτικό του Η΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 4: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 4 από 21

4 K Skouri and I Konstantaras (2010) A note on ldquoAn EOQ model with ramp type demand rate

time dependent deterioration rate unit production cost and shortages submitted to International

Journal of Production Economics (under review)

δ Δημοσιεύσεις σε Πρακτικά Επιστημονικών Συνεδρίων με Κριτές

1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας Πρακτικά 14ου Εθνικού Συνεδρίου

Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging in Proceedings of 18th International Conference on

Production Research Salerno Italy 31 July-04 August 2005

3 I Konstantaras K Skouri and S Papachristos Optimal policy for pricing return and modularity

level for Build-To-Order (BTO) products in 11th European Logistics Association (ELA) Doctorate

Workshop 2006 Proceedings 22-36

ε Ανακοινώσεις σε Συνέδρια1 Ι Κωνσταντάρας και Σ Παπαχρήστος Ο αλγόριθμος των Wagner-Whitin (W-W) και η χρήση

του σε μοντέλα Αντίστροφης Εφοδιαστικής Αλυσίδας 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03 Νοεμβρίου 2001

2 Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος An inventory model with ramp type demand

partial backlogging and Weibull deterioration rate 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου 2005

3 Ι Γκανάς Κ Σκούρη Ι Κωνσταντάρας και Σ Παπαχρήστος Design modularity and return

policy for Build-to-Order (BTO) products 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας

Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου 2005

4 I Konstantaras and S Papachristos Economic production and remanufacturing lot-sizing for a

single product system with backlogging 18th International Conference on Production Research

University of Salerno Salerno Italy 31 July-04 August 2005

5 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 14th International Working Seminar on Production

Economics Innsbruck 20-24 February 2006

6 I Konstantaras S Papachristos K Skouri Optimal policy for pricing return and modularity

level in build-to-order products 11th European Logistics Association (ELA) Doctorate Workshop

Grainau Germany 28-30 June 2006

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 5 από 21

7 K Skouri I Konstantaras S Papachristos and I Ganas An order level inventory system with

ramp type demand rate partial backlogging and Weibull deterioration rate 14th International

Symposium on Inventories Budapest August 21-25 2006

8 K Skouri S Papachristos I Konstantaras and I Ganas Inventory models for deteriorating items

with ramp type demand rate partial backlogging and permissible delay in payments 19ο Εθνικό

Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου 2007

9 K Skouri S Papachristos I Konstantaras and I Ganas An inventory model for deteriorating

items with ramp type demand rate partial backlogging and permissible delay in payments 22nd

European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 22nd European Conference on Operational

Research EURO XXII Prague July 8-11 2007

11 K Skouri I Konstantaras and S Papachristos Two warehouse inventory models for

deteriorating seasonable products with ramp type demand rate 15th International Symposium on

Inventories Budapest August 22-26 2008

12 K Skouri A Lagodimos and I Konstantaras Periodic review (R T) inventory control policy for

stochastic demand and yield 3rd meeting of the EURO Working Group on Stochastic Modelling

June 7-9 2010 Nafplio Greece

στ Επιμόρφωση - Συμμετοχή σε Συνέδρια amp Σεμινάρια1 1ο Ειδικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών ldquoΗ Ανάπτυξη του

Πρωτογενούς Τομέα τον 21ο Αιώνα Η Συμβολή της Επιστήμης του Managementrdquo Ιωάννινα 29 -

31 Οκτωβρίου 1999

2 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03

Νοεμβρίου 2001

3 15ο Πανελλήνιο Συνέδριο Στατιστικής Ιωάννινα 8 - 11 Μαΐου 2002

4 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου

2005

5 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου

2005

6 18th International Conference on Production Research University of Salerno Salerno Italy 31

July-04 August 2005

7 11th European Logistics Association (ELA) Doctorate Workshop Grainau Germany 28-30 June

2006

8 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου

2007

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 6 από 21

9 22nd European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 15th International Symposium on Inventories Budapest August 22-26 2008

ζ Τεχνικές Αναφορές (Technical Reports)

1 S Papachristos and I Konstantaras The reverse WagnerWhitin model with remanufacturing and

manufacturing options Exact results and holding cost stability regions University of Ioannina

Dept of Mathematics Technical Report No 10 December 2003

Σημείωση 1 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό European

Journal of Operational Research (βλέπε ενότητα 4β3)

2 I Konstantaras and S Papachristos Note on Lot-sizing for inventory systems with product

recovery University of Ioannina Dept of Mathematics Technical Report No 13 December 2004

Σημείωση 2 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Economics (βλέπε ενότητα 4β5)

3 I Konstantaras and S Papachristos Lot sizing in a production system with shortages and product

remanufacturing University of Ioannina Dept of Mathematics Technical Report No 15

December 2005

Σημείωση 3 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Research (βλέπε ενότητα 4β2)

5 Διδακτικό Έργο - Εκπαιδευτική Εμπειρία

Ακαδ Έτος19992000 -Ακαδ Έτος20052006

Επιστημονικός - Εργαστηριακός συνεργάτης του ΤΕΙ ΗπείρουΜαθηματικά Ι (εργαστ) Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Ακ Έτος 1999-2000

Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής amp Διοίκησης Ακ Έτος 20002001

Μαθηματικά Ι (εργαστ) και Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Στατιστική Επιχειρήσεων (θεωρία και εργαστ) και Ποσοτική Ανάλυσηστα Χρηματοπιστωτικά Ιδρ (Θεωρία και εργαστ) Τμήμα Ελεγκτικής καιΑσφαλιστικής Ακ Έτος 2001-2002

Στατιστική (θεωρία και Ασκήσεις πρ) Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΕισαγωγή στους ΗΥ και στη Στατιστική Τμήμα Λογοθεραπείας Ακ Έτος 2002-2003

Στατιστική (θεωρία και Ασκήσεις πρ) και Βάσεις Δεδομένων (εργαστ) ΤμήμαΤηλεπληροφορικής amp Διοίκησης Ακ Έτος 2003-2004

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20042005

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 7 από 21

Ακαδ Έτος20072008

Ακαδ Έτος20082009

Ακαδ Έτος20092010

Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20052006

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία) Τμήμα Λογοθεραπείας ΤΕΙΗπείρου

01032004-31082004

23112007-31082008

01032008-31082008

01102008-31082009

01102008-31032009

17032009-31082009

30102009-31082010

Παροχή επικουρικού έργου στη διδασκαλία του μαθήματος laquoΣτατιστικές Μέθοδοιμε εφαρμογή στις Βιολογικές Επιστήμεςraquo στα εργαστήρια του ΤμήματοςΒιολογικών εφαρμογών και Τεχνολογιών του Πανεπιστημίου Ιωαννίνων

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΓενικά Μαθηματικά Ι Τμήμα Χημικό (1ο εξάμηνο χειμερινό)Γενικά Μαθηματικά ΙΙ Τμήμα Χημικό (2ο εξάμηνο εαρινό)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndash υποχρεωτικό τουΗ΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Στατιστική Συμπερασμοτολογία Τμήμα Μαθηματικών (εαρινό εξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στη Στρατιωτική Σχολή Ευελπίδων με σχέση εργασίας ιδιωτικού δικαίουορισμένου χρόνου (βάσει του ΠΔ 40780) Αυτοδύναμη Διδασκαλία τουμαθήματοςΕπιχειρησιακή Έρευνα και Στρατιωτικές Εφαρμογές Αυτής (χειμερινό εξάμηνο)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndashυποχρεωτικό του Η΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 5: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 5 από 21

7 K Skouri I Konstantaras S Papachristos and I Ganas An order level inventory system with

ramp type demand rate partial backlogging and Weibull deterioration rate 14th International

Symposium on Inventories Budapest August 21-25 2006

8 K Skouri S Papachristos I Konstantaras and I Ganas Inventory models for deteriorating items

with ramp type demand rate partial backlogging and permissible delay in payments 19ο Εθνικό

Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου 2007

9 K Skouri S Papachristos I Konstantaras and I Ganas An inventory model for deteriorating

items with ramp type demand rate partial backlogging and permissible delay in payments 22nd

European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 I Ganas I Konstantaras S Papachristos and K Skouri Optimal ordering policies for the single

level lot-sizing problem with lumpy demand 22nd European Conference on Operational

Research EURO XXII Prague July 8-11 2007

11 K Skouri I Konstantaras and S Papachristos Two warehouse inventory models for

deteriorating seasonable products with ramp type demand rate 15th International Symposium on

Inventories Budapest August 22-26 2008

12 K Skouri A Lagodimos and I Konstantaras Periodic review (R T) inventory control policy for

stochastic demand and yield 3rd meeting of the EURO Working Group on Stochastic Modelling

June 7-9 2010 Nafplio Greece

στ Επιμόρφωση - Συμμετοχή σε Συνέδρια amp Σεμινάρια1 1ο Ειδικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών ldquoΗ Ανάπτυξη του

Πρωτογενούς Τομέα τον 21ο Αιώνα Η Συμβολή της Επιστήμης του Managementrdquo Ιωάννινα 29 -

31 Οκτωβρίου 1999

2 14ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Ξάνθη 01-03

Νοεμβρίου 2001

3 15ο Πανελλήνιο Συνέδριο Στατιστικής Ιωάννινα 8 - 11 Μαΐου 2002

4 1ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Συστημικών Μελετών (ΕΕΣΜ) Τρίπολη 12-14 Μαΐου

2005

5 17ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Πάτρα 16-18 Ιουνίου

2005

6 18th International Conference on Production Research University of Salerno Salerno Italy 31

July-04 August 2005

7 11th European Logistics Association (ELA) Doctorate Workshop Grainau Germany 28-30 June

2006

8 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας Επιχειρησιακών Ερευνών (ΕΕΕΕ) Άρτα 21-23 Ιουνίου

2007

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 6 από 21

9 22nd European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 15th International Symposium on Inventories Budapest August 22-26 2008

ζ Τεχνικές Αναφορές (Technical Reports)

1 S Papachristos and I Konstantaras The reverse WagnerWhitin model with remanufacturing and

manufacturing options Exact results and holding cost stability regions University of Ioannina

Dept of Mathematics Technical Report No 10 December 2003

Σημείωση 1 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό European

Journal of Operational Research (βλέπε ενότητα 4β3)

2 I Konstantaras and S Papachristos Note on Lot-sizing for inventory systems with product

recovery University of Ioannina Dept of Mathematics Technical Report No 13 December 2004

Σημείωση 2 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Economics (βλέπε ενότητα 4β5)

3 I Konstantaras and S Papachristos Lot sizing in a production system with shortages and product

remanufacturing University of Ioannina Dept of Mathematics Technical Report No 15

December 2005

Σημείωση 3 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Research (βλέπε ενότητα 4β2)

5 Διδακτικό Έργο - Εκπαιδευτική Εμπειρία

Ακαδ Έτος19992000 -Ακαδ Έτος20052006

Επιστημονικός - Εργαστηριακός συνεργάτης του ΤΕΙ ΗπείρουΜαθηματικά Ι (εργαστ) Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Ακ Έτος 1999-2000

Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής amp Διοίκησης Ακ Έτος 20002001

Μαθηματικά Ι (εργαστ) και Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Στατιστική Επιχειρήσεων (θεωρία και εργαστ) και Ποσοτική Ανάλυσηστα Χρηματοπιστωτικά Ιδρ (Θεωρία και εργαστ) Τμήμα Ελεγκτικής καιΑσφαλιστικής Ακ Έτος 2001-2002

Στατιστική (θεωρία και Ασκήσεις πρ) Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΕισαγωγή στους ΗΥ και στη Στατιστική Τμήμα Λογοθεραπείας Ακ Έτος 2002-2003

Στατιστική (θεωρία και Ασκήσεις πρ) και Βάσεις Δεδομένων (εργαστ) ΤμήμαΤηλεπληροφορικής amp Διοίκησης Ακ Έτος 2003-2004

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20042005

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 7 από 21

Ακαδ Έτος20072008

Ακαδ Έτος20082009

Ακαδ Έτος20092010

Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20052006

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία) Τμήμα Λογοθεραπείας ΤΕΙΗπείρου

01032004-31082004

23112007-31082008

01032008-31082008

01102008-31082009

01102008-31032009

17032009-31082009

30102009-31082010

Παροχή επικουρικού έργου στη διδασκαλία του μαθήματος laquoΣτατιστικές Μέθοδοιμε εφαρμογή στις Βιολογικές Επιστήμεςraquo στα εργαστήρια του ΤμήματοςΒιολογικών εφαρμογών και Τεχνολογιών του Πανεπιστημίου Ιωαννίνων

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΓενικά Μαθηματικά Ι Τμήμα Χημικό (1ο εξάμηνο χειμερινό)Γενικά Μαθηματικά ΙΙ Τμήμα Χημικό (2ο εξάμηνο εαρινό)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndash υποχρεωτικό τουΗ΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Στατιστική Συμπερασμοτολογία Τμήμα Μαθηματικών (εαρινό εξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στη Στρατιωτική Σχολή Ευελπίδων με σχέση εργασίας ιδιωτικού δικαίουορισμένου χρόνου (βάσει του ΠΔ 40780) Αυτοδύναμη Διδασκαλία τουμαθήματοςΕπιχειρησιακή Έρευνα και Στρατιωτικές Εφαρμογές Αυτής (χειμερινό εξάμηνο)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndashυποχρεωτικό του Η΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 6: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 6 από 21

9 22nd European Conference on Operational Research EURO XXII Prague July 8-11 2007

10 15th International Symposium on Inventories Budapest August 22-26 2008

ζ Τεχνικές Αναφορές (Technical Reports)

1 S Papachristos and I Konstantaras The reverse WagnerWhitin model with remanufacturing and

manufacturing options Exact results and holding cost stability regions University of Ioannina

Dept of Mathematics Technical Report No 10 December 2003

Σημείωση 1 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό European

Journal of Operational Research (βλέπε ενότητα 4β3)

2 I Konstantaras and S Papachristos Note on Lot-sizing for inventory systems with product

recovery University of Ioannina Dept of Mathematics Technical Report No 13 December 2004

Σημείωση 2 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Economics (βλέπε ενότητα 4β5)

3 I Konstantaras and S Papachristos Lot sizing in a production system with shortages and product

remanufacturing University of Ioannina Dept of Mathematics Technical Report No 15

December 2005

Σημείωση 3 Αναθεωρημένη έκδοση της εργασίας αυτής έχει δημοσιευθεί στο περιοδικό International

Journal of Production Research (βλέπε ενότητα 4β2)

5 Διδακτικό Έργο - Εκπαιδευτική Εμπειρία

Ακαδ Έτος19992000 -Ακαδ Έτος20052006

Επιστημονικός - Εργαστηριακός συνεργάτης του ΤΕΙ ΗπείρουΜαθηματικά Ι (εργαστ) Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Ακ Έτος 1999-2000

Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής amp Διοίκησης Ακ Έτος 20002001

Μαθηματικά Ι (εργαστ) και Στατιστική (εργαστ) Τμήμα Τηλεπληροφορικής ampΔιοίκησης Στατιστική Επιχειρήσεων (θεωρία και εργαστ) και Ποσοτική Ανάλυσηστα Χρηματοπιστωτικά Ιδρ (Θεωρία και εργαστ) Τμήμα Ελεγκτικής καιΑσφαλιστικής Ακ Έτος 2001-2002

Στατιστική (θεωρία και Ασκήσεις πρ) Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΕισαγωγή στους ΗΥ και στη Στατιστική Τμήμα Λογοθεραπείας Ακ Έτος 2002-2003

Στατιστική (θεωρία και Ασκήσεις πρ) και Βάσεις Δεδομένων (εργαστ) ΤμήμαΤηλεπληροφορικής amp Διοίκησης Ακ Έτος 2003-2004

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20042005

Στατιστική (θεωρία και Ασκήσεις πρ) και Εφοδιαστική (θεωρία και Ασκήσεις πρ)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 7 από 21

Ακαδ Έτος20072008

Ακαδ Έτος20082009

Ακαδ Έτος20092010

Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20052006

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία) Τμήμα Λογοθεραπείας ΤΕΙΗπείρου

01032004-31082004

23112007-31082008

01032008-31082008

01102008-31082009

01102008-31032009

17032009-31082009

30102009-31082010

Παροχή επικουρικού έργου στη διδασκαλία του μαθήματος laquoΣτατιστικές Μέθοδοιμε εφαρμογή στις Βιολογικές Επιστήμεςraquo στα εργαστήρια του ΤμήματοςΒιολογικών εφαρμογών και Τεχνολογιών του Πανεπιστημίου Ιωαννίνων

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΓενικά Μαθηματικά Ι Τμήμα Χημικό (1ο εξάμηνο χειμερινό)Γενικά Μαθηματικά ΙΙ Τμήμα Χημικό (2ο εξάμηνο εαρινό)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndash υποχρεωτικό τουΗ΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Στατιστική Συμπερασμοτολογία Τμήμα Μαθηματικών (εαρινό εξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στη Στρατιωτική Σχολή Ευελπίδων με σχέση εργασίας ιδιωτικού δικαίουορισμένου χρόνου (βάσει του ΠΔ 40780) Αυτοδύναμη Διδασκαλία τουμαθήματοςΕπιχειρησιακή Έρευνα και Στρατιωτικές Εφαρμογές Αυτής (χειμερινό εξάμηνο)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndashυποχρεωτικό του Η΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 7: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 7 από 21

Ακαδ Έτος20072008

Ακαδ Έτος20082009

Ακαδ Έτος20092010

Τμήμα Τηλεπληροφορικής amp Διοίκησης Στατιστική για τις Επιστήμες Συμπεριφοράς(θεωρία και Ασκήσεις πρ) Τμήμα Λογοθεραπείας Ακ Έτος 20052006

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία και εργαστήριο) ΤμήμαΛογοθεραπείας ΤΕΙ Ηπείρου

Στατιστική για τις Επιστήμες Συμπεριφοράς (Θεωρία) Τμήμα Λογοθεραπείας ΤΕΙΗπείρου

01032004-31082004

23112007-31082008

01032008-31082008

01102008-31082009

01102008-31032009

17032009-31082009

30102009-31082010

Παροχή επικουρικού έργου στη διδασκαλία του μαθήματος laquoΣτατιστικές Μέθοδοιμε εφαρμογή στις Βιολογικές Επιστήμεςraquo στα εργαστήρια του ΤμήματοςΒιολογικών εφαρμογών και Τεχνολογιών του Πανεπιστημίου Ιωαννίνων

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΓενικά Μαθηματικά Ι Τμήμα Χημικό (1ο εξάμηνο χειμερινό)Γενικά Μαθηματικά ΙΙ Τμήμα Χημικό (2ο εξάμηνο εαρινό)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndash υποχρεωτικό τουΗ΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Στατιστική Συμπερασμοτολογία Τμήμα Μαθηματικών (εαρινό εξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στη Στρατιωτική Σχολή Ευελπίδων με σχέση εργασίας ιδιωτικού δικαίουορισμένου χρόνου (βάσει του ΠΔ 40780) Αυτοδύναμη Διδασκαλία τουμαθήματοςΕπιχειρησιακή Έρευνα και Στρατιωτικές Εφαρμογές Αυτής (χειμερινό εξάμηνο)

Λέκτορας στο Τμήμα Διαχείρισης Περιβάλλοντος και Φυσικών Πόρων τουΠανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένου χρόνου(βάσει του ΠΔ 40780) Αυτοδύναμη διδασκαλία του μαθήματοςΕπιχειρησιακή Έρευνα και Εφαρμογές Πληροφορικής (επιλογής ndashυποχρεωτικό του Η΄ εξαμήνου)

Λέκτορας στο Τμήμα Μαθηματικών του Πανεπιστημίου Ιωαννίνων με σχέσηεργασίας ιδιωτικού δικαίου ορισμένου χρόνου (βάσει του ΠΔ 40780)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 8: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 8 από 21

01032010-31082010

Αυτοδύναμη διδασκαλία των μαθημάτωνΜαθηματικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (χειμερινό εξάμηνο)Στατιστική Ανάλυση Δεδομένων Τμήμα Μαθηματικών (εαρινό εξάμηνο)και συνδιδασκαλία των μαθημάτωνΕισαγωγή στη Στατιστική Τμήμα Παιδαγωγικό (χειμερινό εξάμηνο)Εισαγωγή στις Πιθανότητες Τμήμα Μαθηματικών (χειμερινό εξάμηνο)Εισαγωγή στη Στατιστική Τμήμα Μαθηματικών (εαρινό εξάμηνο)Μη Παραμετρική Στατιστική-Κατηγορικά Δεδομένα Τμήμα Μαθηματικών (εαρινόεξάμηνο)Στατιστικές Μέθοδοι για Βιολογικές Επιστήμες Τμήμα Βιολογικών Εφαρμογών καιΤεχνολογιών (εαρινό εξάμηνο)

Λέκτορας στο Τμήμα Διοίκησης Επιχειρήσεων Αγροτικών Προϊόντων amp Τροφίμωντου Πανεπιστημίου Ιωαννίνων με σχέση εργασίας ιδιωτικού δικαίου ορισμένουχρόνου (βάσει του ΠΔ 40780) για την αυτοδύναμη διδασκαλία των μαθημάτωνΜάνατζμεντ Αλυσίδας Προσφοράς (υποχρεωτικό εαρινού εξαμήνου) καιΔιοίκηση Παραγωγής (επιλογής εαρινού εξαμήνου)

6 Επιστημονικές Δραστηριότητες

Μέλος Συντακτικών Επιτροπών

ndash Associate Editor International Journal of Systems Science Απρίλιος 2009 ndash παρόν

Μέλος Οργανωτικών Επιτροπών Συνεδρίων

ndash Μέλος Οργανωτικής Επιτροπής 19ο Εθνικό Συνέδριο Ελληνικής Εταιρίας ΕπιχειρησιακώνΕρευνών (ΕΕΕΕ) με θέμα laquoΕπιχειρησιακή Έρευνα στην Εφοδιαστική Αλυσίδαraquo Άρτα 21-23Ιουνίου 2007

Κριτής συγγραμμάτων

ndash Κριτής άρθρων στα Διεθνή Επιστημονικά Περιοδικά

1 International Journal of Production Research (IJPR)

2 European Journal of Operational Research (EJOR)

3 Journal of the Operational Research Society (JORS)

4 International Journal of Production Economics (IJPE)

5 International Journal of Systems Science (IJSS)

6 Asia Pacific Journal of Operational Research (APJOR)

7 Mathematical and Computer Modelling (MCM)

8 Applied Mathematical Modelling (AMM)

9 Omega The International Journal of Management Science (OMEGA)

10 International Transactions in Operational Research (ITOR)

11 IMA Journal of Management Mathematics (IMAMAN)

12 International Journal of Information Technology amp Decision Making (IJITDM)

13 International Journal of Flexible Manufacturing Systems (IJFMS)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 9: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 9 από 21

14 International Journal of Applied Management Science (IJAMS)

15 Bulletin of the Malaysian Mathematical Sciences (BMMS)

16 Asia Pacific Management Review (APMR)

7 Συμμετοχή σε Ερευνητικά Προγράμματα

Απρ 2004-Δεκ 2007 Επιχειρησιακός Ερευνητής - Μέλος Ερευνητικής ομάδαςΕρευνητικό πρόγραμμα με τίτλο ldquoLogistics Management ΠοσοτικέςΜέθοδοι Διαχείρισης Αποθεμάτωνrdquo χρηματοδοτούμενο στα πλαίσια τουέργου laquoΑΡΧΙΜΗΔΗΣ ΕΝΙΣΧΥΣΗ ΕΡΕΥΝΗΤΙΚΩΝ ΟΜΑΔΩΝ ΣΤΑΤΕΙraquo από το επιχειρησιακό πρόγραμμα ΕΠΕΑΕΚ ΙΙΤΕΙ Ηπείρου Τμήμα ΛογιστικήςΕπιστημονικός Υπεύθυνος Δρ Ι Γκανάς

8 Επίβλεψη διπλωματικών ΕργασιώνΚώστας ΝικολόπουλοςΠολυνίκη Ζάγκα

Διείσδυση Νέων Τεχνολογιών Πληροφορικής και Επικοινωνιών (ΤΠΕ) στιςΜικρομεσαίες Επιχειρήσεις (ΜΜΕ) Η περίπτωση του Ν ΆρταςΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Τσαλαχούρη ΕυγενίαΤσίγκα Σαββούλα

Στρατηγικός σχεδιασμός της Εφοδιαστικής Αλυσίδας ΤμήμαΤηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

Μουστάκας ΙωάννηςΣτάμου Σωτήριος

Παπαχρήστου ΔήμητραΔασούλα Βίκυ

Internet και Χρηματιστηριακά Τμήμα Τηλεπληροφορικής amp ΔιοίκησηςΤΕΙ Ηπείρου

ldquoLogistics Managementrdquo Ποσοτικές Μέθοδοι Διαχείρισης ΑποθεμάτωνΤμήμα Τηλεπληροφορικής amp Διοίκησης ΤΕΙ Ηπείρου

9 Ξένες ΓλώσσεςΑγγλικά (First Certificate in English)

10 Γνώσεις ΗΥΓλώσσες Προγραμματισμού TURBO PASCAL FORTRAN

Προγράμματα Στατιστικής SAS SPSS

Προγράμματα Επιχειρησιακής Έρευνας LINDO LINGO WinQSB

Λογιστικά Φύλλα MS EXCEL

Προγράμματα Επεξεργασίας Κειμένου MS WORD

Μαθηματικά Πακέτα MATHEMATICA

Προγράμματα Επικοινωνίας INTERNET EXPLORER NETSCAPE

11 Ετεροαναφορές

S Papachristos and I Konstantaras (2006) Economic ordering quantity models for items with

imperfect quality International Journal of Production Economics 100(1) 148-154

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 10: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 10 από 21

1 E Abdullah and O Gultekin (2007) An economic order quantity model with defective

items and shortages International Journal of Production Economics 106(2) 544-549

2 Sh-Tyan Lo Hui-Ming Wee and Wen-Chang Huang (2007) An integrated production-

inventory model with imperfect production processes and Weibull distribution deterioration

under inflation International Journal of Production Economics 106 (1) 248-260

3 H-H Lee (2008) The investment model in preventive maintenance in multi-level

production systems International Journal of Production Economics 112(2) 816-828

4 X-B Wang W-S Tang and F Xue (2006) Fuzzy random EOQ models with imperfect

quality items Proceedings of the 2006 International Conference on Machine Learning and

Cybernetics art no 4028368 1861-1866

5 KS Wu LY Ouyang and CH Ho (2007) Integrated vendor-buyer inventory system with

sublot sampling inspection policy and controllable lead time International Journal of

System Science 38 (4) 339-350

6 J Rezaei and M Davoodi (2008) A deterministic multi-item inventory model with supplier

selection and imperfect quality Applied Mathematical Modelling 32(10) 2106-2116

7 M R Barzoki J C Tsou and W J Chen (2006) A new EPQ model with continuous

quality characteristic and rework In proceedings of Conference on Management

Information and Business China University of Technology Taiwan (ISBN 957-41-3583-7)

8 B Maddaha and MY Jaber (2008) Economic Order Quantity for Items with Imperfect

Quality Revisited International Journal of Production Economics 112(2) 808-815

9 Bau-ding Lee (2006) Economic ordering quantity model for items with random imperfect

quality proportion and related shortage consideration Masterrsquos Thesis Department of

Industrial Management National Taiwan University of Science and Technology

10 Shailesh S Kulkarni (2008) On a multi-product model of lot-sizing with quality costs

International Journal of Production Economics 112(2) 1002-1010

11 D Ha and S L Kim (2008) Implementing JIT purchasing An integrated approach with

imperfect quality In 2008 Southeast Decision Sciences Institute Conference Proceedings

pages 661-666 February 20-22 2008 Orlando Florida (available at

wwwsedsiorg2008_Proceedingsprocp070924005pdf)

12 B Maddah M K Salameh and G M Karame (2009) Lot sizing with random yield and

different qualities Applied Mathematical Modelling 33(4) 1997-2009

13 MY Jaber SK Goyal and M Imran (2008) Economic production quantity model for

items with imperfect quality subject to learning effects International Journal of Production

Economics 115(1) 143-150

14 A EROĞLUM and H DEMİR (2006) Kusurlu Uumlruumln Oranı ile Bir Ekonomik Sipariş

Miktarı Modeli Review of Social Economic amp Business Studies Vol910 263-286

(available on line at fbeemuedutrjournaldoc9-1014pdf)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 11: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 11 από 21

15 M Bijari MR Barzoki and M Jahanbazi (2007) Effects of imperfect products and rework

on lot sizing with work in process inventory 2 and Expo 2007 - Industrial Engineerings

Critical Role in a Flat World - Conference Proceedings 919-925

16 JC Tsou SR Hejazi and MR Barzoki (2007) Economic production quantity model for

items with continuous quality characteristic taguchis cost rework and reject 2 and Expo

2007 - Industrial Engineerings Critical Role in a Flat World - Conference Proceedings

1132-1138

17 X Wang W Tang Y Sai K Zhang (2008) Fuzzy Random EOQ Model with Defective

Items and Shortages IEEE International Conference on Networking Sensing and Control

2008 ICNSC 2008 pages 107-110 Digital Object Identifier 101109ICNSC20084525192

18 Y X Wang (2008) Optimal return price and design quality under two-echelon supply

chain Masterrsquos Thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

19 HK Fang (2007) An integrated model of production and purchase with returned defective

items in lot-splitting delivery environment Masterrsquos Thesis Department of Industrial and

Information Management National Taiwan University of Science and Technology

20 YX Yang (2008) Economic order quantity of perishable products with imperfect quality

Masterrsquos Thesis Department of Industrial and Information Management National Taiwan

University of Science and Technology

21 P Kelle S Transchel S Minner (2009) Buyerndashsupplier cooperation and negotiation

support with random yield consideration International Journal of Production Economics

118(1) 152-159

22 X-Β Wang and W-S Tang (2007) Economic production quantity model with uncertain

defective rate and its algorithm Computer Engineering and Applications 43(35) 105-107

23 P Biswas and B R Sarker (2008) Optimal batch quantity models for a lean production

system with in-cycle rework and scrap International Journal of Production Research

46(23) 6585-6610

24 W-K K Hsu H F Yu (2009) EOQ model for imperfective items under a one-time-only

discount Omega 37(5) 1018-1026

25 Q Zhang QX Li W Gu and XN Zhu (2008) Fuzzy inventory model with defective rate

and shortage backordering Xitong Gongcheng Lilun yu ShijianSystem Engineering Theory

and Practice 28(11) 62-68

26 A Eroglu A Suumltccediluuml and ve Harun Sulak (2008)An economic production quantity model

with random defective rate in imperfect production processes Journal of the Faculty of

Engineering and Architecture of Gazi University 23(4) 923-929

27 SS Sana (2010) An economic production lot size model in an imperfect production

system European Journal of Operational Research 201(1) 158-170

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 12: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 12 από 21

28 CH Ho (2009) A minimax distribution free procedure for an integrated inventory model

with defective goods and stochastic lead time demand International Journal of Information

and Management Sciences 20(1) 161-171 (available on line at

jimsmstkuedutwPDFM20N111pdf)

29 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

30 S R Hejazi J C Tsou and MR Barzoki (2008) Optimal lot size of EPQ model

considering imperfect and defective products Journal of Industrial Engineering

International 4(7) 59-68 (available on line at

httpwwwsidirenVEWSSIDJ_pdf117320080707pdf)

31 S H Yoo D S Kim M S Park (2009) Economic production quantity model with

imperfect-quality items two-way imperfect inspection and sales return International

Journal of Production Economics 121(1) 255-265

32 L H Chen and F S Kang (2010) Coordination between vendor and buyer considering

trade credit and items of imperfect quality International Journal of Production Economics

123(1) 52-61

33 T W Lin (2009) Optimal policy for a simple supply chain system with defective items and

returned cost under screening errors Journal of the Operations Research Society of Japan

52(3) 307-320

34 B A Nadjafi and B Abbasi (2009) EPQ model with depreciation cost and process quality

cost as continuous functions of time Journal of Industrial Engineering International 5(8)

77-89 (available on line at httpwwwsidirEnVEWSSIDJ_pdf117320090808pdf)

35 J Li H Feng and M Wang (2009) A replenishment policy with defective products

backlog and delay of payments Journal of Industrial and Management Optimization 5(4)

867-880

36 S Rudert U Buscher and C Schwarz (2009) Integrierte Planung von Produktions-

Nacharbeits- und Recyclingprozessen bei fehlerbehafteter Produktion book chapter in S

Voszlig et al (eds) Logistik Management Systeme Methoden Integration Springer-Verlag

Berlin Heidelberg 2009 doi 101007978-3-7908-2362-2_19

37 Tien-Yu Lin (2008) Powerful Retailerrsquos Optimal Order Policy under All-unit Quantity

Discounts Consideration Journal of Overseas Chinese Institute of Technology 31 71-79

38 Q Li J Yang and H Lee (2008) An optimization inventory model with allowable

deffective rate and shortage backordering ACME 2008 Proceedings of International

Conference on Pacific Rim Management (Revised Edition) 18th Annual Meeting July 24-

26 2008 Toronto Ontario Canada pages 159-165 (available on line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 13: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 13 από 21

http9914012612ACMEProceedings08ACME200820accepted20papers20with2

0PDFC2302pdf)

39 C Y Hong (2007) Fuzzy EOQ model with imperfect quality items Masterrsquos Thesis

Shipping Management Institute National Kaohsiung University of Marine Science and

Technology China

40 H-C Chang C-H Ho (2009) Exact closed-form solutions for ldquooptimal inventory model

for items with imperfect quality and shortage backorderingrdquo Omega 38(3-4) 233-237

41 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

42 B Maddah L Moussawi and MY Jaber (2009) Lot sizing with a Markov production

process and imperfect items scrapped International Journal of Production Economics

124(2) 340-347

43 FS Kang (2009) The trade credit policy in the integrated inventory model with negotiation

scheme PhD thesis Department of Industrial and Information Management National

Taiwan University of Science and Technology

44 QX Li Q Zhang XN Zhou and XL Xan (2009) Optimal inventory model with

completely returning defective items Chinese Journal of Management 17(6) 116-121

45 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

accepted manuscript 58(4) 691-695

46 M Khan MY Jaber and M Bonney (2010) An economic order quantity (EOQ) for items

with imperfect quality and inspection errors International Journal of Production

Economics accepted manuscript doi101016jijpe201001023 (available on line at

wwwsciencedirectcom)

47 TY Lin (2010) An economic order quantity with imperfect quality and quantity discounts

Applied Mathematical Modelling 34(10) 3158-3165

48 H Sulak and A Eroglu (2009) New approaches in economic order and production quantity

models The Journal of Faculty of Economics and Administrative Sciences Suleyman

Demirel University Vol14 No3 pp383-406 (available on line at

httpiibfsduedutrdergifiles2009-3-20pdf)

49 S Chen (2008) The three-stage supply chain model with the integrated planning of supplier

selection Logistics Research and Practice in China- Proceedings of 2008 International

Conference on Logistics Engineering and Supply Chain 752-757 (available on line at

httpwwwbmtfinetuploadproduct2010021265352633q0wtterkpdf)

50 P Lou Q Liu Z Zhou and S Quan (2009) Production-outsourcing supply chain quality

management based on multi-agent system IE and EM 2009 - Proceedings 2009 IEEE 16th

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 14: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 14 από 21

International Conference on Industrial Engineering and Engineering Management article

number 5344372 pages 1555-1559

51 S S Shang and J X You (2009) Quality cost control model based on fuzzy neural

network IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference on

Industrial Engineering and Engineering Management article number 5344434 pages 1112-

1116

52 T Y Lin and D H Yeh (2010) Optimal coordination policy for supply chain system under

imperfect quality consideration Journal of Marine Science and Technology 18(3) 449-457

(available on line at httpwwwjmstorgtwmarine18-3449-457pdf)

53 X Liu and S Cetinkaya (2010) The supplier-buyer integrated production-inventory model

with random yield International Journal of Production Research article in press (available

on line at httppdfserveinformaworldcom610803_758077517_923940722pdf)

54 S-Z Lou Y-H Wu and W Lu (2010) Inventory policy under random defective rate amp

disruption Jisuanji Jicheng Zhizao XitongComputer Integrated Manufacturing Systems

CIMS 16 (5) pp 1082-1087

55 H Feng J Li and Y Zeng (2010) Retailerrsquos optimal replenishment policy with defective

products under cash discount and two level trade credit policy Global Journal of

Management and Business Research 10(4) 21-35 (available on line at

httpglobaljournalsorgGJMBR_Volume10GJMBR_Vol10_issue4_EVpdf)

56 L-Y Ouyang C-T Chang and P Shum (2010) The EOQ with defective items and

partially permissible delay in payments linked to order quantity derived algebraically

Central European Journal of Operations Research article in press (available on line at

httpwwwspringerlinkcomcontenth878586336j637n1fulltextpdf)

57 K-H Wang C-T Tung C-L Huang and Y-J Lee (2010) An EOQ model for defective

items with shortagesrdquo Journal of Global Business Management 6(1)

58 J Hu C Guo R Xu and Y Ji (2010) Fuzzy economic order quantity model with imperfect

quality and service level 2010 Chinese Control and Decision Conference CCDC 2010 art

no 5498441 pp 4042-4047 (available on line at

httpprojecteuclidorgDPubSRepository10Disseminatehandle=euclidjap1011994178

ampview=bodyampcontent-type=pdf_1)

59 N H Shah A S Gor C Jhaveri (2010) Joint optimal production-inventory model with

imperfect production processes and varying deterioration rate in buoyant market

International Journal of Operational Research 9(2) 125-140

I Konstantaras and S Papachristos (2006) Lot-sizing for a single-product recovery system with

backordering International Journal of Production Research 44(10) 2031-2045

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 15: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 15 από 21

1 M Y Jaber and M A Rosen (2007) The economic order quantity repair and waste disposal

model with entropy cost European Journal of Operational Research 188(1) 109-120

2 MY Jaber and M El Saadany (2007) A productionrepair inventory model with returnrsquos

decision subject to quality and price considerations Proceedings of the 37th International

Conference on Computers and Industrial Engineering October 20-23 2007 Alexandria

Egypt

3 M El Saadany and MY Jaber (2008) The EOQ repair and waste disposal model with

switching costs Computers amp Industrial Engineering 55(1) 219-233

4 MY Jaber and M El Saadany (2009) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 Y Kaifu and G Yang (2008) Manufacturing and remanufacturing lot-size model with

backordering and disposal 2008 International Conference on Wireless Communications

Networking and Mobile Computing WiCOM 2008 art no 4679490 doi

101109WiCom20081582

6 K Yuan and Y Gao (2008) Lot-size model for a recovery system with backordering and

disposal 2008 International Conference on Wireless Communications Networking and

Mobile Computing WiCOM 2008 art no 4679499

7 M El Saadany and MY Jaber (2010) A productionremanufacturing inventory model with

price and quality dependant return rate Computers amp Industrial Engineering 58(3) 352-

362

8 P Sasikumara and G Kannanb (2009) Issues in reverse supply chain part III classification

and simple analysis International Journal of Sustainable Engineering 2(1) 2ndash27

9 MY Jaber and AMA El Saadany (2009) An economic production and remanufacturing

model with learning effects International Journal of Production Economics corrected

proof doi101016jijpe200904019 (available on line at wwwsciencedirectcom)

10 S Marshall (2008) A product recovery model that uses the quality of returns to determine

type of recovery In Proceedings of the 43rd Annual Conference of the Operational

Research Society of New Zealand (ORSNZ) 24ndash25 November 2008 at Victoria University

of Wellington New Zealand pages 96-105 (available on line at

httpssecureorsnzorgnzconf43contentORSNZ08_conference_proceedingspdf)

11 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

12 K F Yuan and Y Gao (2008) To consider the old standard of product quality and business

services bulk of the hybrid system model Systems Engineering 9

13 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 16: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 16 από 21

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

14 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

15 Y Feng and S Viswanathan (2010) A new lot-sizing heuristic for manufacturing systems

with product recovery International Journal of Production Economics corrected proof

doi101016jijpe201004018

16 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

17 K F Yuan and Y Gao (2010) Inventory decision-making for a hybrid system considering

the effect of the disposal and the service level Jisuanji Jicheng Zhizao XitongComputer

Integrated Manufacturing Systems CIMS 16 (3) pp 573-579

18 A M A El Saadany M Y Jaber (2010) A productionremanufacture model with returnsrsquo

subassemblies managed differently International Journal of Production Economics

accepted manuscript doi101016jijpe201008014 (available on line at

wwwsciencedirectcom)

19 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

20 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras and S Papachristos (2007) Optimal policy and holding cost stability regions in a

periodic review inventory system with manufacturing and remanufacturing options European Journal

of Operational Research 178(2) 433-448

1 B Mahadevan and D Mrinmay (2007) A survey based framework for Recovery and

Remanufacturing issues of Orphan Products POMS 18th Annual Conference Dallas Texas

USA May 4 - May 7

2 Y Wang and C-X Gao (2008) Price decision in a custom-made product supply chain with

remanufacturing Proceedings of 2007 International Conference on Management Science

and Engineering ICMSE07 (14th) Article number 4421930 Pages 717-721 (available on

line at

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 17: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 17 από 21

httpieeexploreieeeorgiel54421806442180704421930pdftp=amparnumber=4421930ampis

number=4421807)

3 O Dey and D Chakraborty (2009) Fuzzy periodic review system with fuzzy random

variable demand European Journal of Operational Research 198(1) 113-120

4 MY Jaber and M El Saadany (2008) The production remanufacture and waste disposal

model with lost sales International Journal of Production Economics 120(1) 115-124

5 P Shah A Gosavi and R Nagi (2010) A machine learning approach to optimise the usage

of recycled material in a remanufacturing environment International Journal of Production

Research 48(4) 933-955

6 G Ferrer and JM Swaminathan (2009) Managing new and differentiated remanufactured

products European Journal of Operational Research 203(2) 370-379

7 H H Doh and DH Lee (2009) Generic production planning model for remanufacturing

systems Journal of Engineering Manufacture 224(1) 159-168

8 M A Ilgin and S M Gupta (2009) Environmentally conscious manufacturing and product

recovery (ECMPRO) A review of the state of the art Journal of Environmental

Management 91(3) 563-591

9 Y Wang LY Sun J Yang L Gang Y Wang LY Sun H J Yang and G Li (2009)

Different recovery under the law of re-manufacturing supply chain decision-making and

collaborative research Journal of Management Science 22(1)

10 P Pintildeeyro and O Viera (2010) The economic lot-sizing problem with remanufacturing and

one-way substitution International Journal of Production Economics 124(2) 482-488

11 H-D Ahn H-W Kim and D-H Lee (2009) A dynamic lot sizing model for

remanufacturing systems In Proceedings of the 10th Asia Pacific Industrial Engineering amp

Management Systems Conference pages 1612-1620 December 14-16 2009 Kitakyushu

Japan (available on line)

12 K-F Yuan and Y Gao (2010) Optimal policy on manufacturing amp remanufacturing in a

periodic review inventory system Jisuanji Jicheng Zhizao XitongComputer Integrated

Manufacturing Systems 16(2) 310-316

13 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

14 P H Chen (2010) Optimal pricing for hybrid systems with substitutive demands Masterrsquos

Thesis Department of Industrial and Information Management Kung University China

15 W H Yang (2010) Optimal production policies in hybrid system with demand substitution

Masterrsquos Thesis Department of Industrial and Information Management Kung University

China

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 18: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 18 από 21

16 G Ferrer (2010) The remanufacturing process of defence assets with stochastic yield

Acquisition Sponsored Research Reports Graduate School of Business amp Public Policy

Naval Postgraduate School pp 1-39 (available on line at

httpwwwacquisitionresearchnet_betafilesFY2010NPS-LM-10-015pdf)

17 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

I Konstantaras SK Goyal and S Papachristos (2007) Economic ordering policy for an item with

imperfect quality subject to the in-house inspection International Journal of Systems Science 38(6)

473-482

1 LE Cardenas-Barron (2009) Economic production quantity with rework process at a

single-stage manufacturing system with planned backorders Computers amp Industrial

Engineering 57(3) 1105-1113

2 S M Huang (2009) Production policy under reworking of imperfect quality items trade

credit and partial backlogging Masterrsquos Thesis Department of Business Administration

Tatung University Press Unit

3 M Khan MY Jaber and MIM Wahab (2009) Economic order quantity model for items

with imperfect quality with learning in inspection International Journal of Production

Economics 124(1) 87-96

4 B Maddah MK Salameh and L Moussawi (2010) Order overlapping A practical

approach for preventing shortages during screening Computers amp Industrial Engineering

58(4) 691-695

5 H C Chang and C H Ho (2010)A note on solving the EOQ model with imperfect quality

subject to in-house inspection IMA Journal of Management Mathematics corrected proof

doi101093imamandpq002

6 K Nilakantan (2010) Enhancing supply chain performance with improved order-control

policies International Journal of Systems Science 41(9) 1099-1113

I Konstantaras and S Papachristos (2008) A note on Developing an exact solution for an inventory

system with product recovery International Journal of Production Economics 111(2) 707-712

1 M Omar and I Yeo (2009) A model for a production-repair system under a time varying

demand process International Journal of Production Economics 119(1) 17-23

2 T Schulz and I Ferretti (2008) On the alignment of lot sizing decisions in a

remanufacturing system in the presence of random yield Faculty of Economics and

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 19: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 19 από 21

Management Magdeburg (FEMM) Working Paper Series paper No 34 December 2008

(available on line at httpwwwwwuni-

magdeburgdefwwdekafemma2008_Dateien2008_34pdf)

3 K F Yuan and Y Gao (2009) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

4 J Zhou Y Wang and HQ He (2009) An optimal ordering and recovery policy for direct

reusable deterioration items 2009 International Conference on Management Science and

Engineering - 16th Annual Conference Proceedings ICMSE 2009 art no 5317350 pp

575-580

5 JA Jung and SG Koh (2008) An improved ordering and recovery policy for reusable

items Journal of Korean Institute of Industrial Engineers 34(1) 32-41

6 DH Lee HJ Kim and JS Kim (2008) Reverse Logistics Research issues and literature

review Journal of Korean Institute of Industrial Engineers 34(3) 270-288

7 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

8 E Akccedilalı and S Ccediletinkaya (2010) Quantitative models for inventory and production

planning in closed-loop supply chains Review Paper International Journal of Production

Research article in press doi 10108000207541003692021 (available on line at

httppdfserveinformaworldcom577025_758077517_921791048pdf)

9 Marcin Plewa (2010) Model systemu wsparcia logistycznego procesu zagospodarowania

obiektoacutew wycofanych z eksploatacji Ph D Thesis Politechnika Wrocławska Instytut

Konstrukcji i Eksploatacji Maszyn Zakład Logistyki i Systemoacutew Transportowych Raport

serii PRE nr 32010 (available on line at

httpwwwdbcwrocplContent4372Marcin_Plewa_praca_doktorskapdf)

K Skouri I Konstantaras S Papachristos and I Ganas (2009) Inventory models with ramp type

demand rate partial backlogging and Weibull deterioration rate European Journal of Operational

Research 192(1) 79-92

1 Bo-Hong Lyu (2008) Optimal economic production quantity of deteriorate item with fixed

warehouse capacity Masterrsquos Thesis Department of Industrial Management National

Taiwan University of Science and Technology

2 W Pan G Hua L Yu J Zhang G Xie and S Wanga (2009) Determining optimal selling

price order size and the number of price changes with Weibull distribution deterioration

Journal of Computers 4(12) 1294-1300

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 20: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 20 από 21

3 JT Mo YQ Pan L Cao and YJ Zhou (2009) Inventory model for deteriorating items

based on product life cycle Journal of Chongqing Institute of Technology 23(2)

4 S Huang C Yang and J Yang (2009) Distribution network design model for deteriorating

items based on Stackelberg game Chinese Journal of Management 17(6) 122-129

5 Ibraheem and A Murata (2009) An optimal EOQ model for perishable products with

varying demand pattern In Proceedings of 5th International Workshop on Computational

Intelligence and Applications IEEE SMC Hiroshima Chapter Hiroshima University Japan

10-12 November 2009

6 L Ruxian L Hongjie and J R Mawhinney (2010) A review on deteriorating inventory

study Journal of Service Science and Management 3 117-129

7 S Agrawal and S Banerjee (2010) Two-warehouse inventory model with ramp-type

demand and partially backlogged shortages International Journal of Systems Science

article in press doi 10108000207720903308363

8 PK Tripathy and M Pattnaik (2008) An Entropic Order Quantity model with fuzzy

holding cost and fuzzy disposal cost for perishable items under two component demand and

discounted selling price Pakistan Journal of Statistics and Operation Research 4(2) 93-

110

9 S Huang C Yang and J Yang (2009) EOQ models for deteriorating items with trapezoidal

type demand and partial backlogging rate Industrial Engineering amp Management 14(6)

10 C-G Jiang J-G Peng C-Q Yuan G-H Wang Y He S-H Li and B Liu (2009) Some

thoughts about the whole life-cycle cost management of civil engineering projects IE and

EM 2009-Proceedings 2009 IEEE 16th International Conference on Industrial Engineering

and Engineering Management art no 5344541 pp 496-499 (available on line at

httpieeexploreieeeorgstampstampjsptp=amparnumber=5344541)

11 M Pattnaik (2010) An Entropic Order Quantity model (EnOQ) under instant deterioration

of perishable items with price discounts International Mathematical Forum 5(52) 2581-

2590 (available on line at httpwwwm-hikaricomforthpattnaikIMF49-52-2010pdf )

12 H-W Lo (2010) An Inventory policy for Assemble-to-Order systems with perishable and

common components Masterrsquos Thesis Department of Industrial and Information

Management Kung University China

13 B Karmakar and K D Choudhury (2010) A review on inventory models for deteriorating

items with shortages Assam University Journal of Science amp Technology Physical Sciences

and Technology 6(2) 51-59 (available on line at

httpwwwinflibnetacinojsindexphpAUJSATarticleviewFile183186)

14 K-C Hung (2010) An inventory model with generalized type demand deterioration and

backorder rates European Journal of Operational Research in press accepted manuscript

doi101016jejor201008026 (available on line at wwwsciencedirectcom)

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)

Page 21: BΙ Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Αusers.uom.gr/~ikonst/cv.pdfΒ Ι Ο Γ Ρ Α Φ Ι Κ Ο Σ Η Μ Ε Ι Ω Μ Α 1. Προσωπικά Στοιχεία Επώνυμο

Ιωάννης Κωνσταντάρας Βιογραφικό Σημείωμα

Οκτώβριος 2010 σελίδα 21 από 21

15 M Valliathal and R Uthayakumar (2010) Optimal pricing and replenishment policies of an

EOQ model for non-instantaneous deteriorating items with shortages The International

Journal of Advanced Manufacturing Technology article in press doi 101007s00170-010-

2913-y (available on line at httpwwwspringerlinkcomcontentr3747150524m7l31)

I Konstantaras and S Papachristos (2008) Note on ldquoAn optimal ordering and recovery policy for

reusable itemsrdquo Computers amp Industrial Engineering 55(3) 729-734

1 C-H Chen and MBC Khoo (2009) Optimum process mean and manufacturing quantity

settings for serial production system under the quality loss and rectifying inspection plan

Computers amp Industrial Engineering 57(3) 1080-1088

2 K F Yuan and Y Gao (2010) Inventory decision-making models for a closed-loop supply

chain system International Journal of Production Research 48(20) 6155-6187 (Στο

άρθρο αυτό υπάρχουν και ευχαριστίες για την βοήθεια που προσέφερα στην

αναθεώρηση του)

3 S Gan and C Su (2009) Inventory control for remanufacturing system with stochastic

product returns IE and EM 2009 - Proceedings 2009 IEEE 16th International Conference

on Industrial Engineering and Engineering Management article number 5344478 pages

802-807

4 K-F Yuan and Y Gao (2010) Research reviews on inventory decision-making in the

product manufacture and recovery hybrid system East China Economic Management

24(5)

I Konstantaras and K Skouri (2010) Lot sizing for a single product recovery system with variable

setup numbers European Journal of Operational Research 203 326-335

1 C-F Lin (2010) Optimal policies for the closed-loop supply chain inventory systems with

product remanufacturing under price-sensitive demand consideration Masterrsquos Thesis

Department of Information Management National Taiwan University of Science and

Technology (available on line at httppc01libntustedutwETD-dbETD-

searchview_etdURN=etd-0716110-162950)

K Skouri and I Konstantaras (2009) Order level inventory models for deteriorating

seasonablefashionable products with time dependent demand and shortages Mathematical Problems

in Engineering 2009 article ID 679736 24 pages doi1011552009679736

1 Y He and J He (2010) A production model for deteriorating inventory items with

production disruptions Discrete Dynamics in Nature and Society article in press (available

on line at httpwwwhindawicomjournalsddnsaip189017html)