5
Digitales Radiograe-System Digital radiography system 

Catalogo Rayos x Digital Peds 600

Embed Size (px)

Citation preview

Page 1: Catalogo Rayos x Digital Peds 600

7/24/2019 Catalogo Rayos x Digital Peds 600

http://slidepdf.com/reader/full/catalogo-rayos-x-digital-peds-600 1/4

Digitales Radiografie-System

Digital radiography system 

Page 2: Catalogo Rayos x Digital Peds 600

7/24/2019 Catalogo Rayos x Digital Peds 600

http://slidepdf.com/reader/full/catalogo-rayos-x-digital-peds-600 2/4

 Volldigital und vielseitig:PEDS 600 Radiografie-System

PROVOTEC PEDS 600 – Produktbeschreibung

Das PROVOTEC PEDS 600 ist ein volldigitales Radiografie-

System inklusive mikroprozessorgesteuertem Converter-

Generator PROVARIO 50 mit 50 kW sowie Schwenkbügel-

Stativ und darin eingebautem PROTEC RAPIXX 4343M

DR-Flatpanel Detektor. Durch die Verwendung der CONAXX

Bildakquisitionssoftware von PROTEC kommen damit die

 Vorteile der Digitaltechnik in vollem Umfang zum Tragen –

optimaler Workflow, in wenigen Augenblicken zur diagnosti-

zierbaren Röntgenaufnahme mit herausragender Bildqualität.

Aufgrund des kompakten Aufbaus eignet sich das System

bestens für die Orthopädie, Chirurgie und Traumatologie, wo

geringer Platzbedarf von entscheidender Bedeutung ist.

Zur Gewährleistung eines schnellen Arbeitsablaufs ist auch der

digitale Belichtungsautomat und die Organautomatik im Paket

enthalten. Das System ist lieferbar mit verschiedenen PROTECRAPIXX-Flatpanel Versionen und kann auch softwareseitig

dank des modularen Aufbaus individuell erweitert werden bis

hin zum PACS (z. B. PROPAXX medical imaging software).

Produktmerkmale

Digitales Komplettsystem mit voller DICOM-Kompatibilität

 Verschiedene Flatpanel-Versionen des Fullsize-Formats

43x43 cm stehen zur Auswahl

Je nach ausgewählter Flatpanel-Version kommt die passende

Rastereinheit zum Einsatz

Aufgrund der Bauart nur ein Detektor für alle Richtungen

bzw. nur ein Stativ für Aufnahmen mit horizontalem und

vertikalem Strahlengang

Röntgenstrahlereinheit und Bildempfänger an einem Gerät

montiert

Hervorragende Bildqualität mit minimaler Strahlendosis

Stufenlos verstellbarer FDA (Fokus-Detektor-Abstand)

bis 200 cm

Drehbare Querarmeinheit +/- 180° sowie am Säulenstativ

vertikal verfahrbar

Höhenverstellung von 40-220 cm /

Schrägeinstrahlung +/- 35°

Touchscreen-taugliche und modular erweiterbare

CONAXX-Software inklusive

DigitalesRadiografie-System

Digital radiography system 

Mikroprozessorgesteuerter

PROVARIO 50-Generator

als Standard-

Systemkomponente

Microprocessor controlled 

PROVARIO 50 as standard 

system component 

Ein mobiler Patienten-

lagerungstisch der

PROGNOST-Serie als

passende OptionA mobile PROGNOST 

patient table as fitting 

option 

PROVOTEC profitiert

 von über 30 Jahren

Röntgenerfahrung der

früheren PICKER X-ray

PROVOTEC benefits from 

more than 30 years X-ray 

experience of former 

PICKER company 

Page 3: Catalogo Rayos x Digital Peds 600

7/24/2019 Catalogo Rayos x Digital Peds 600

http://slidepdf.com/reader/full/catalogo-rayos-x-digital-peds-600 3/4

Fully digital and versatile: PEDS 600 radiography system 

CONAXX image

acquisition software

serienmäßig enthalten

zur Steuerung und

 Verwaltung

Included: CONAXX 

image acquisition 

software for operation 

and administration 

Die optimale Ergänzung:

PROPAXX medical imaging

software zur Bilddiagnose

und ArchivierungThe ideal option: 

PROPAXX medical 

imaging software for 

diagnosis and archiving 

PROVOTEC PEDS 600 – Product description 

The PROVOTEC PEDS 600 is a fully digital radiography system

including the microprocessor controlled inverter generator 

PROVARIO 50 / 50kW as well as a swiveling arm stand with

integrated PROTEC RAPIXX 4343M DR-flatpanel detector. By 

using the CONAXX image acquisition software from PROTEC,

all advantages of latest digital technology are realized to the 

full extent – optimal workflow, and diagnosable x-ray exposure 

of outstanding quality within a few seconds.

Due to the compact design the system is ideal for any kind of 

examination techniques in orthopedic, surgical and trauma-

tology application where minimum space required is of vital 

importance, regularly. To ensure a fast workflow the digital 

automatic exposure control (AEC) and anatomical programmer 

(APR) are part of the package. The system is available with

different PROTEC RAPIXX-flatpanel versions and can, due to its modular set-up, also be upgraded individually with additional 

software options up to a PACS (e.g. PROPAXX medical imaging 

software).

Product features 

Ready-to-use digital system with complete DICOM 

compatibility 

Different flatpanel versions of fullsize-format 43x43 cm

are available 

Depending on the preferred flatpanel version, a respectively 

designed, special DR-Bucky is part of the system

Due to the special PEDS 600 design only one detector for all 

directions, respectively just one stand for exposures with

horizontal and vertical radiation is used 

Tube assembly and detector mounted at one single device 

Brilliant image quality along with minimal dose of radiation

Continously adjustable FDA (Focus-Detector-Distance) 

up to 200 cm

Rotating counterbalanced cross arm +/-180° and stand 

vertically movable 

Height adjustment from 40 to 220 cm

Oblique X-ray beam +/-35° 

Touchscreen compatible CONAXX software included 

with modular enhancement options 

Schwenkbügelstativ

mit maximaler

Anwendungsflexibilität

Swiveling arm stand 

for maximum 

application flexibility 

Page 4: Catalogo Rayos x Digital Peds 600

7/24/2019 Catalogo Rayos x Digital Peds 600

http://slidepdf.com/reader/full/catalogo-rayos-x-digital-peds-600 4/4

PROTEC GmbH & Co. KG · medical systems

In den Dorfwiesen 14 · D-71720 OberstenfeldTel.: +49 (0) 70 62/92 55-0 · Fax: +49 (0) 70 62/2 26 [email protected] · www.protec-med.com

Hier entsteht innovativeMedizintechnik.

This is where innovative medical technology is produced.

       K      1      5   -      0      1_

      0      9   -      1      1

    ·     s     u       b       j     e     c      t      t     o

     c       h     a     n     g     e     p     r       i     o     r     n     o      t       i     c     e

Standard-Lieferumfang

PROWING, Schwenkbügelstativ zur Aufnahme der

Röntgenstrahlereinheit und DR-Flatpanel Detektoreinheit

PROVARIO 50, Röntgengenerator, 50 kW,inklusive Belichtungsautomat und Organautomatik

Röntgenstrahler, mit Hand-Tiefenblende

Hochspannungskabel

Dosisflächenprodukt-Messeinrichtung

RAPIXX 4343M Detektoreinheit (DR-Flatpanel inklusive

passender Rastereinheit mit 3-Feld-Messkammer)

CONAXX image acquisition software, inkl. Generatoranbindung

Benutzerfreundlichkeit

Systembedienung, Steuerung von Generator und Softwareanwendung

vereint in einer Konsole für optimalen Workflow

Generatorsteuerung direkt über die CONAXX Bildakquisitionssoftware

möglich

Leicht bewegliche Schwenkbügel-Einheit mit Gewichtsausgleich undelektromagnetischen Bremsen

Drehbare Tiefenblende

Bedienelemente am Kommandoarm griffgünstig angeordnet

In Verbindung mit fahrbarem Patientenlagerungstisch wird das System

zum Buckyarbeitsplatz

Optionen / Zubehör (Auszug)

Mobile Patientenlagerungstische der PROGNOST-Serie mit

schwimmender Kohlefasertischplatte mit fester Höhe odermotorisch höhenverstellbar (auch netzunabhängig möglich)

Weitere CONAXX Software Module

PROPAXX medical imaging software

Technische Daten

Die genauen technischen Daten inklusive Abmessungen sind dem sepa-

raten Produktdatenblatt zu entnehmen.

Details zur notwendigen bzw. empfohlenen PC-System-Ausstattung ge-mäß der bei PROTEC erhältlichen, umfassenden Konfigurationsübersicht.

Standard delivery range 

PROWING, swiveling arm stand for mounting the tube assembly and 

DR-flatpanel detector unit 

PROVARIO 50, X-ray generator, 50 kW, with AEC and APR 

 X-ray tube with manual collimator 

High voltage cables 

Dose area product meter system

RAPIXX 4343M detector unit (DR-flatpanel including suitable DR-bucky 

with 3-field AEC chamber) 

CONAXX image acquisition software incl. X-ray generator connection

Ease of use 

System operation, control of X-ray generator and software applications 

combined in one console to provide an optimum workflow 

 X-ray generator control directly through CONAXX image acquisition

software possible 

Easily movable, counterbalanced swiveling arm unit with electromagnetic 

brakes 

Rotatable collimator 

Ergonomically positioned control elements 

In combination with a mobile patient table the system becomes a bucky 

workplace 

Options / Accessories (abstract) 

Mobile PROGNOST patient tables with floating tabletop, also available 

in motorized height adjustable version (even battery driven making power 

connection redundant) 

Additional CONAXX software modules 

PROPAXX medical imaging software 

Technical data 

Detailed technical data including dimensions as per separate product 

data sheet 

Further information about necessary or recommended PC system

requirements according to PROTEC system configuration overview.