Upload
vanlien
View
234
Download
3
Embed Size (px)
Citation preview
D
DFlachmeißel
Chisels D1-D6
Hohlmeißel
Gouges D7-D10
Stanzmeißel
Punch Chisel D11
Stößel
Tampers D 12-D13
Knochentransplantation
Bone Transplantation D14-D15
Hämmer
Mallets D 16-D17
D
- D1 -
FlachmeißelChisels
Flachmeißel n. Dahmen
Dahmen Osteotome
300 mm
300 mm
Gerade
Straight
BreiteWidth
04 mm
05 mm
06 mm
08 mm
10 mm
12 mm
15 mm
20 mm
22 mm
25 mm
Gerade AbgewinkeltStraight Angled
75-3600/04 75-3605/04
75-3600/05 75-3605/05
75-3600/06 75-3605/06
75-3600/08 75-3605/08
75-3600/10 75-3605/10
75-3600/12 75-3605/12
75-3600/15 75-3605/15
75-3600/20 75-3605/20
75-3600/22 75-3605/22
75-3600/25 75-3605/25
Abgewinkelt
Angled
4 mm4 mm
5 mm5 mm
6 mm6 mm
10 mm10 mm
8 mm8 mm
12 mm12 mm
15 mm15 mm
20 mm20 mm
25 mm25 mm
22 mm22 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 1
DFlachmeißelChisels
Flachmeißel n. Guillaume
Guillaume Chisel
Extra schlank und leicht, 250 mm
Extra slim and light, 250 mm
Die Meißel n. Guillaume eignen sich zur Resektion von lumbalen Gelenkfacetten.Durch die bajonettförmige Biegung ist eine gute Übersicht über das Operationsfeldgegeben.
The Guillaume Chisels are suitable for resection of lumbar facets. The bayonetshaped curve allows a good view of the operation site.
Haltegriff für Hohl- undFlachmeißel n. Guillaume
Handle for Guillaume Gougesand Chisels
75-3625/90
55 mm
55 mm
- D2 -
BreiteWidth
2 mm
3 mm
4 mm
5 mm
6 mm
7 mm
8 mm
Gerade BajonettförmigStraight Bayonet shaped
75-3625/21 75-3625/22
75-3625/31 75-3625/32
75-3625/41 75-3625/42
75-3625/51 75-3625/52
75-3625/61 75-3625/62
75-3625/71 75-3625/72
75-3625/81 75-3625/82
4 mm4 mm3 mm3 mm2 mm2 mm 5 mm5 mm 6 mm6 mm 7 mm7 mm 8 mm8 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 2
DD
- D3 -
FlachmeißelChisels
Flachmeißel n. Scaglietti
Scaglietti Chisel
240 mm
240 mm
Spezialmeißel n. Scaglietti
Scaglietti Special Chisel
Schaft stark gebogen, Klinge leichthohl, 250 mm
Strongly curved shank, cutting edgeslightly hollow, 250 mm
75-3627/1175-3627/14
Breite /Width
11 mm
14 mm
Breite /Width
05 mm
10 mm
12 mm
15 mm
20 mm
75-3626/0575-3626/1075-3626/1275-3626/1575-3626/20
20 mm20 mm15 mm15 mm
14 mm14 mm
12 mm12 mm
11 mm11 mm
10 mm10 mm5 mm5 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 3
DFlachmeißelChisels
Meißel n. Loew
Loew Chisel
Bajonettförmig, 230 mm
Bayonet shaped, 230 mm
75-3628/01
Anschliff außen
Outside bevel
75-3628/02
Anschliff innen
Inside bevel
Die Meißel n. Loew eignen sich zur Resektion von lumbalen Gelenkfacetten.
The Loew Chisels are used for resection of lumbar facets.
- D4 -
Flachmeißel n. Wolter
Wolter Osteotome
75-3628/10
Klinge 10 x 30 mm, vorn und seitlich angeschliffen, 300 mm
Blade 10 x 30 mm, tip and lateral cutting, 300 mm
Der Meißel hat sich bei der Ausräumung von Wirbelkörpern und Zwischenwirbel-scheiben bewährt. Er wird üblicherweise ohne Hammer und nur durch Drehen undSchieben benutzt.
The Wolter Osteotome ist useful to remove discs and bone from inside the vertebralbody, just by turning and pushing the instrument without using a mallet.
10 mm30 mm
11 mm11 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 4
D
- D5 -
FlachmeißelChisels
Lexer Flachmeißel mod. n. Dahmen
Lexer-Dahmen Chisel
Blatt gerade, 220 mm
Blade straight, 220 mm
Breite /Width
05 mm
07 mm
10 mm
15 mm
18 mm
20 mm
22 mm
25 mm
30 mm
75-3630/05
75-3630/07
75-3630/10
75-3630/15
75-3630/18
75-3630/20
75-3630/22
75-3630/25
75-3630/30
5 mm5 mm
7 mm7 mm
10 mm10 mm
18 mm18 mm
15 mm15 mm
20 mm20 mm
22 mm22 mm
25 mm25 mm
30 mm30 mm
Lexer Hohlmeißel mod. n. Dahmen, s. Seite D10Lexer-Dahmen Gouge, see page D10
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 5
DFlachmeißelChisels
- D6 -
Lambottemeißel
Lambotte Osteotome
Seitliche Kerben bei 3 und 4 cmhinter der Schneide, Griff 20 mm breit,300 mm
Lateral notches at 3 and 4 cm fromcutting edge, handle 20 mm wide,300 mm
Gerade
Straight
Leicht gebogen
Slightly curved
BreiteWidth
08 mm
10 mm
12 mm
14 mm
Gerade Leicht gebogenStraight Slightly curved
75-3633/08 75-3633/18
75-3633/10 75-3633/20
75-3633/12 75-3633/22
75-3633/14 75-3633/24
14 mm14 mm12 mm12 mm10 mm10 mm8 mm8 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 6
D
- D7 -
HohlmeißelGouges
Hohlmeißel n. Dahmen
Dahmen Gouge
mit Außenschliff, 300 mm
outside bevel, 300 mm
GeradeStraight
75-3610/0475-3610/0575-3610/0675-3610/0875-3610/1075-3610/1275-3610/1575-3610/2075-3610/2275-3610/25
Nach außen abgewinkelt
Angled backward
Nach innen abgewinkelt
Angled forward
BreiteWidth
04 mm05 mm06 mm08 mm10 mm12 mm15 mm20 mm22 mm25 mm
BreiteWidth
04 mm
05 mm
06 mm
08 mm
10 mm
12 mm
15 mm
20 mm
22 mm
25 mm
nach außen nach innen abgewinkelt abgewinkelt
Angled backward Angled forward
75-3612/04 75-3615/0475-3612/05 75-3615/0575-3612/06 75-3615/0675-3612/08 75-3615/0875-3612/10 75-3615/1075-3612/12 75-3615/1275-3612/15 75-3615/1575-3612/20 75-3615/2075-3612/22 75-3615/2275-3612/25 75-3615/25
4 mm4 mm
5 mm5 mm
6 mm6 mm
10 mm10 mm
8 mm8 mm
12 mm12 mm
15 mm15 mm
20 mm20 mm
25 mm25 mm
22 mm22 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 7
DHohlmeißelGouges
- D8 -
Hohlmeißel n. DahmenDahmen Gouge
Mit langem griffigem Metallheft, 280 mm
With long metal handle, 280 mm
Hohlmeißel n. Dahmen
Dahmen Gouge
Mit langem griffigem Metallheft,280 mm
Long metal handle, 280 mm
75-3619/06
Stark retrograd gebogen
Acutely backward curved
GeradeStraight
75-3620/0475-3620/0575-3620/0675-3620/0775-3620/1075-3620/1275-3620/1575-3620/20
BreiteWidth
04 mm05 mm06 mm07 mm10 mm12 mm15 mm20 mm
BreiteWidth
04 mm
05 mm
06 mm
07 mm
10 mm
12 mm
15 mm
20 mm
Leicht gebogen Stark gebogen Slightly curved strongly curved
75-3622/04 75-3624/04
75-3622/05 75-3624/05
75-3622/06 75-3624/06
75-3622/07 75-3624/07
75-3622/10 75-3624/10
75-3622/12 75-3624/12
75-3622/15 75-3624/15
75-3622/20 75-3624/20
4 mm4 mm
5 mm5 mm
7 mm7 mm
6 mm6 mm
10 mm10 mm
12 mm12 mm
20 mm20 mm
15 mm15 mm
6 mm6 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 8
D
- D9 -
HohlmeißelGouges
Hohlmeißel n. Guillaume
Guillaume Gouge
Extra schlank und leicht, 250 mm
Extra slim and light, 250 mm
BreiteWidth
2 mm
3 mm
4 mm
5 mm
6 mm
7 mm
8 mm
Gerade BajonettförmigStraight Bayonet shaped
75-3625/02 75-3625/12
75-3625/03 75-3625/13
75-3625/04 75-3625/14
75-3625/05 75-3625/15
75-3625/06 75-3625/16
75-3625/07 75-3625/17
75-3625/08 75-3625/18
4 mm4 mm3 mm3 mm2 mm2 mm 5 mm5 mm 6 mm6 mm 7 mm7 mm 8 mm8 mm
Die Meißel n. Guillaume eignen sich zur Resektion von lumbalen Gelenkfacetten.Durch die bajonettförmige Biegung ist eine gute Übersicht über das Operationsfeldgegeben.
The Guillaume Gouges are suitable for resection of lumbar facets. The bayonetshaped curve allows a good view of the operation site.
Haltegriff für Hohl- undFlachmeißel n. Guillaume
Handle for Guillaume Gougesand Chisels
75-3625/90
55 mm
55 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 9
DHohlmeißelGouges
- D10 -
Hohlmeißel n. Cobb
Cobb Gouge
4,5 mm breit, 300 mm
4.5 mm wide, 300 mm
75-3629/01
Gerade
Straight
75-3629/02
Bajonettförmig gebogen
Bayonet shaped
75-3629/03
Kurze starke Biegung
Short acute curve
75-3629/04
Lange starke Biegung
Long acute curve
Blatt gebogen/Blade curved Breite /Width
05 mm
07 mm
10 mm
15 mm
18 mm
20 mm
22 mm
25 mm
30 mm
75-3632/0575-3632/0775-3632/1075-3632/1575-3632/1875-3632/2075-3632/2275-3632/2575-3632/30
Lexer Hohlmeißel mod. n. Dahmen
Lexer-Dahmen Gouge
220 mm
220 mm
4,5 mm4,5 mm
5 mm5 mm
7 mm7 mm
10 mm10 mm
18 mm18 mm
10 mm10 mm
20 mm20 mm
22 mm22 mm
25 mm25 mm
30 mm30 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 10
D
- D11 -
StanzmeißelPunch Chisel
Wirbelkörperstanzmeißel
Spinal Punch Chisel
Innen angeschliffen, seitlicheSchlitze zur Entfernung desKnochenzylinders, 360 mm
Rounded, inside bevel, lateral slotsfor removal of bone cylinder,360 mm
75-3634/01
9 mm Innen-∅, 12 mm Außen-∅
Inner ∅ 9 mm, outer ∅ 12 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 11
DStößelTampers
- D12 -
Stößel n. Dahmen
Dahmen Tampers
Gerade, Arbeitsfläche kreuzgerieft,300 mm
Straight, serrated tip, 300 mm
∅
02 mm
03 mm
04 mm
05 mm
06 mm
07 mm
08 mm
09 mm
10 mm
75-3800/0275-3800/0375-3800/0475-3800/0575-3800/0675-3800/0775-3800/0875-3800/0975-3800/10
Distal 30° abgewinkelt, Arbeitsflächekreuzgerieft, 300 mm
30° angled distally, serrated tip, 300mm
∅∅ 10 mm10 mm∅∅ 9 mm9 mm∅∅ 8 mm8 mm∅∅ 7 mm7 mm∅ 6 mm6 mm
∅ 5 mm5 mm∅ 4 mm4 mm∅ 3 mm3 mm∅ 2 mm2 mm
∅∅ 10 mm10 mm∅∅ 9 mm9 mm∅∅ 8 mm8 mm∅∅ 7 mm7 mm∅ 6 mm6 mm
∅ 5 mm5 mm∅ 4 mm4 mm∅ 3 mm3 mm∅ 2 mm2 mm
3030°°°°
∅
02 mm
03 mm
04 mm
05 mm
06 mm
07 mm
08 mm
09 mm
10 mm
75-3800/2275-3800/2375-3800/2475-3800/2575-3800/2675-3800/2775-3800/2875-3800/2975-3800/30
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 12
∅ 10 mm
∅ 9 mm
∅ 8 mm
∅ 7 mm
∅ 6 mm
∅ 5 mm
∅ 4 mm
∅ 3 mm
∅ 2 mm
D
- D13 -
StößelTampers
Knochennachschlag-instrument
Bone Tamper
Schlagfläche kreuzgerieft,155 mm
Serrated tip, 155 mm
∅
02 mm
03 mm
04 mm
05 mm
06 mm
07 mm
08 mm
09 mm
10 mm
10-1645/02
10-1645/03
10-1645/04
10-1645/05
10-1645/06
10-1645/07
10-1645/08
10-1645/09
10-1645/10
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 13
DKnochentransplantationBone Transplantation
- D14 -
Spezialmeißel n. O'Brien,modifiziert
O'Brien, Special Chisel,modified
75-4600
Klinge 11 x 11 mm, 350 mm
Blade 11 x 11 mm, 350 mm
Nachschlaginstrument für Knochenblock
Bone Tamper
Kopf rechteckig, 10 x 15 mm, 350 mm
Rectangular tip, 10 x 15 mm, 350 mm
75-4605
Gerade
Straight
75-4606
30° gewinkelt (o. Abb.)
Angled 30° (not ill.)
Nachschlaginstrument für Knochenblock
Bone Tamper
Kopf rechteckig, 14 x 19 mm, 350 mm
Rectangular tip, 14 x 19 mm, 350 mm
75-4610
Gerade (o. Abb.)
Straight (not ill.)
75-4611
30° gewinkelt
Angled 30°
Zirkel
Caliper
75-4620
Zum Abstecken des Spanlagers, 180 mm
For measuring excavated bone cavity,180 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 14
D
- D15 -
KnochentransplantationBone Transplantation
Einschlaginstrument für Knochentransplantate
Impactor for bone transplants
Konkave Einschlagfläche,kreuzgerieft
Concave impaction surface, cross-serrated
05 x 10 mm
07 x 12 mm
09 x 18 mm
10 x 15 mm
12 x 18 mm
75-3401/01220 mm
75-3401/02220 mm
75-3401/03220 mm
75-3401/04350 mm
75-3401/05350 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 15
DHämmerMallets
- D16 -
75-3642/01
Kopf 280 g, Kopf-∅ 25 mm, 230 mm
Head 280 g, head-∅ 25 mm, 230 mm
Hammer
Mallet
Rostfreier Stahl, Hohlheftgriff
Stainless steel, hollow handle
Hammer aus Kunststoff
Plastic Mallet
15-1042
Mit zirkulären Stabilisierungsringenfür die Schlagflächen,Kopf 220 g, Kopf-∅ 42 mm, 260 mm
Lead filled, with stabilization rim for contact surfaces, head 220 g, head-∅ 42 mm, 260 mm
75-3642/02
Kopf 160 g, Kopf-∅ 19 mm, 190 mm
Head 160 g, head-∅ 19 mm, 190 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 16
D
- D17 -
HämmerMallets
Hammer
Mallet
10-1624/01
Mit austauschbaren Nylon-Schlagflächen, Kopf 119 g, Kopf-∅ 25 mm, 185 mm
With replaceable Nylon Caps, head 119 g, head-∅ 25 mm, 185 mm
Ersatzschlagfläche
Replacement Cap
10-1624/02
Für 10-1624/01 (o. Abb.)
For 10-1624/01 (not ill.)
Ersatzschlagfläche
Replacement Cap
10-1624/06
Für 10-1624/05 (o. Abb.)
For 10-1624/05 (not ill.)
Kleiner Kunststoffhammer
Mallet of Linen Phenolic
10-1630
Kopf 60 g, Kopf-∅ 30 mm, 180 mm
Head 60 g, head-∅ 30 mm, 180 mm
Metallhammer
Meat Mallet
10-1624/05
Mit Metall-/Kunststoff-Schlagfläche,Kopf 154 g, Kopf-∅ 25 mm, 185 mm
With metal/plastic caps, head 154 g, head-∅ 25 mm, 185 mm
D_01_17_linke.qxd 26.01.2007 14:46 Uhr Seite 17