The Technology and Practice Oriented Brand for Automation ... · Engineering Systems M2M, Teleservice, Remote Control, and Remote Maintenance Datalogger Modular Automation Energy

The Technology and Practice Oriented Brand for Automation Technology and Electrical Engineering

www.etz.de

Media Kit 2020

newsletter 8/2019

Anzeige

Liebe newsletter-Leserinnen und -Leser,die Zeit ist reif für einen Wandel. Das scheinen sich jedenfalls einige Unternehmen in den letzten Monaten gedacht zu haben und sind dabei sich zu ändern, beispielhaft sei hier nur die neue Unternehmensstruktur von Turck oder die neue Zentrale von RS Components genannt.

Mehr darüber und zu dem was sich sonst noch in der Welt der Automation und Elektrotechnik im vergangenen Monat ereignet hat sowie anstehenden Veranstaltungen, erfahren Sie wieder in diesem etznewsletter. Bei der Lektüre wünschen wir Ihnen wieder viel Vergnügen, Ihr etzTeam

Anzeige

Einstieg in die Highend-Messtechnik:Präzise, schnell, robust

Anzeige

AB SOFORTLIEFERBAR!

IHR WEG IN DIE DIGITALE ZUKUNFT.

AB SOFORTLIEFERBAR!

ASi-5AUTOMATISIERUNG

NEU GEDACHT.

BW_Transformer_ASi_5_190x30.indd 1 12.12.18 10:32

IoT Analytics, Spezialist für Studien und Marktübersichten rund um die Themen Internet of Things (IoT), M2M und Industry 4.0, hat Endanwender nach ihren Erfahrungen mit IoTPlattformen gefragt. Die Ergebnisse wurden jetzt in dem 184Seiten umfassenden IoT Platforms End User Satisfaction Report 2019 veröffentlicht. Der Report will die Transparenz in dem Markt für IoTPlattformen verbessern und ranked die Plattformen

(sowohl für die Telekommunikation als auch für die Industrie) nach der Kundenzufriedenheit basierend auf über 800 Datenpunkten. mehr ...

Ranking der 25 besten IoT-Plattformen

Der globale MultiChannelAnbieter von Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man

den Distributor im „Atrium Plaza“ (Bild) in der Mainzer Landstraße 180. Als Schrittmacher des B2B eCommerce findet RS Components in Frankfurt

am Main nicht nur das Umfeld für zukünftiges Wachstum, der Umzug steht auch im Zeichen einer geistigkreativen Erneuerung. mehr ...

RS Components zieht nach Frankfurt/Main

Der AMA Verband für Sensorik und Messtechnik (AMA) hat seinen Branchenführer 2019/20 veröffentlicht. Die Broschüre (Bild) informiert auf 135 Seiten in mehr als 1.000 verschiedenen Kategorien über die Sensoren, Messtechnik und Dienstleitungen der 450 Mitglieder aus Industrie und Wissenschaft. Das Verbandsver

zeichnis ermöglicht Interessierten die Suche nach Messgrößen, nach Schlagwörtern oder die gezielte Suche nach AMAMitgliedern, die in alphabetischer Reihenfolge mit Kontaktdaten und Sortiment abgebildet werden. mehr ...

AMA veröffentlicht Anbieterübersicht

Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroVer triebsGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der ElektromechanikDistributor evg mit Stammsitz in Mönchengladbach (Bild) auf eine 50jäh

rige Erfolgsgeschichte zurück. Aktuell beliefert evg rund 5.000 Kunden mit einem Sortiment von über 60.000 Produkten mar k t f üh rende r

Hersteller. Zu den Meilensteinen seit der Jahrtausendwende zählen der Neubau eines Logistikzentrums sowie die Inbetriebnahme eigener Spritzgießanlagen nebst Werkzeugbau. mehr ...

50 Jahre evg


Der globale MultiChannelvon Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man


Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der Elektromechaniktributor evg mit Stammsitz in Mönchengladbach (

50 Jahre evg

TITELSTORYBerechtigungskonzepte: Safety & Security im Zusammenspiel

MULTITURN-ENCODERSchrittmotoren in Sachen Performance aufrüsten

DURCHGÄNGIG BIS ZUR CLOUDKommunikationsfähigesPower Management

7/2019www.etz.de

A810

0

Media Kit Journal3

2020

1 Title: etz elektrotechnik & automation

2 Short Summary:etz is published monthly and in further 5 special editions and offers information in a technology and practice-oriented way on electrical engineering, automation and drive technologies, energy and process automation, test and measurement as well as renewable energies and energy effi ciency. Besides the technical and application oriented articles and product news the journal gives valued information on a regular basis on all electrotechnical safety standards and drafts. etz has one of the highest percentage of subscribers of all journals in German targeting the market of industrial electrotechnical and automation technology.

3 Target Group:etz provides engineers and technicians in the fi eld of discrete manufacturing & machine automation, electrotechnical and supply industry valued information as a basis for the decision making process in their professional fi eld.

4 Publication Frequency: monthly plus 5 special issues

5 Size of Journal: DIN A4 (210 mm × 297 mm)

6 Volume: 141th Volume 2020

7 Subscription Rates: Subscription (1 year) € 163.00* Single issue € 11.90*

8 Organ: Organ of the VDE, the GMA and the ETG

9 Memberships: IVW, AMF, Media Database of the German Trade Press

10 Publishing House: VDE VERLAG GMBH Kaiserleistraße 8 A · 63067 Offenbach · Germany www.vde-verlag.de

11 Publisher: VDE Verband der Elektrotechnik Elektronik Informations-technik e. V. (German Association for Electrical, Electronic and Information Technologies)

12 Advertising: Ronny Schumann, Advertising ManagerPhone +49-69-84 00 06-13 40, Fax -13 98Email [email protected]

13 Editors: Dipl.-Ing. Ronald Heinze, Editor-in-ChiefDipl.-Ing. Frank Nolte, Deputy Editor-in-ChiefDipl.-Ing. Inge HübnerDipl.-Ing. Markus HohlPhone +49-69-84 00 06-13 31, Fax -13 98Email [email protected]

14 Content Analysis 2018 = 16 IssuesTotal Volume 1,627 pages = 100 %Editorial Part 1,279 pages = 77.3 %Advertisements 345 pages = 22.7 % thereof: Publisher‘s own ads 15 pages = 1.6 % Inserts 5

15 Content Analysis of the Editorial Part 2018 = 1,279 pages

According to the type of the articles:Technical and application-oriented articles 46 %Product information,Market and sector information 19 %Notifi cations of Standards and Miscellaneous 35 %

*= plus postage

1

Profi le

Media Kit Journal2

2020 Table of Contents

Journal 1 Profi le Page 3

T Editorial Calendar Page 4P Rate Card Page 12P Product-Advertorial-PLUS Page 14F Formats and Technical Information Page 152 Circulation and Geographical Analysis Page 193-E Structural Analysis of Recipients Page 21

Website 1 Profi le Page 24

P Advertising Rates Page 25N Metrics Page 25F Formats and Technical Information Page 26

Newsletter 1 Profi le Page 27

P Advertising Rates Page 28N Metrics Page 28F Formats and Technical Information Page 29

Content Marketing Page 30

Your Contacts Page 34General Terms and Conditions Page 35

The brand etz includes the following products:– the professional journal etz as technology and practice-oriented magazine

for automation and electrical engineering with the topics: “Discrete Manufacturing & Machine Automation”, “Process Automation & Energy Automation”, “Drive Engineering & Switching Technology”, and “Components & Periphery”,

– the special editions “Hanover Fair”, “Electro mechanical Components”, and “SPS smart production solutions”,

– the etz-Report,– the portal www.etz.de,– the monthly published etz-newsletter (+ special editions),– the etz@tour, and– the etz Business Talk (Premium Webinar.




7/2019www.etz.de

A810

0

DURCHGÄNGIG BIS ZUR CLOUD

newsletter 8/2019

Anzeige

ULTRA FAST AUTOMATION1µs REAKTIONSZEIT



Anzeige


Anzeige

AB SOFORTLIEFERBAR!


AB SOFORTLIEFERBAR!

ASi-5AUTOMATISIERUNG

NEU GEDACHT.

BW_Transformer_ASi_5_190x30.indd 1 12.12.18 10:32














50 Jahre evg

3Publication Date: 02.03.20

Advertisements: 11.02.20

Editorial Submissions: 16.01.20

Safety-Oriented Automation

Operating and Monitoring/IPC and HMI

Compact PLC

MES and Industrie 4.0

Industrial Image Processing

Robotics

Industrial Bus Systems and Industrial Ethernet

Position and Rotary Encoders

Data Analytics

Control Systems and Engineering Systems

M2M, Teleservice, Remote Control, and Remote Maintenance

Datalogger

Modular Automation

Energy Management and Measurement Technology

Process Sensors (pressure, filling level, temperature, humidity, mass flow)

Industrial Security

Servo, Step and Linear Drives

Integrated Safetyfor Drive Technology

Middle Voltage Switchgear

Small and Compact Drives

Recording of Electrical Values

UPS, Power Supplies, Batteries, and Transformers

Cables, Wires, and Screwed Cable Glands

Light Barriers and Light Grids

Displays, and Control Units

Power Distribution Systems

Light+Building Frankfurt/M., 08.03. – 13.03.20

LogimatStuttgart, 10.03. – 12.03.20

Metav Düsseldorf, 10.03. – 13.03.20

EMVKöln, 17.03. – 19.03.20

MSR-Spezialmesse Rhein-MainFrankfurt/M., 25.03.20

AutomatisierungstreffBöblingen, 24.03. – 26.03.20

Special: Digital Transformation and Automation Solutions for Intralogistics and Logistics




Smart Sensors

Integrated Automation Solutions for Machine Engineering

Wireless Communication

Condition Monitoring and Predictive Maintenance

Logic Modules and Compact Controllers

Quality Assurance

IO-Link, Automation ML, MQTT and OPC UA

Big Data and Cloud- Applications

Control and Monitoring Systems

Asset Management

Process Data Communications

Cloud Solutions

Energy Management and Energy Measuting Technology

Grid Quality and Monitoring

Converter Technology and Circuit Feedback

Power Quality and Reactive Current Compensation

Soft Starter and Motor Protection Equipment

Switches, Contactors, Fuses, and Relays

Smart IO Components

Push-Buttons, Keyboards, Displays, and Terminals

Testing and Measuring

Interface Technology, Connectors, and Connection Technology

Portable Measurement Equipment

Hannver FairHanover, 20.04. – 24.04.20

IFAT MUnich, 04.05. – 08.05.20

PCIMNuremberg, 05.05. – 07.05.20

ControlStuttgart, 05.05. – 08.05.20

InterpackDüsseldorf, 07.05. – 13.05.20

Smart Automation Austria Vienna/Austria, 12.05. – 14.05.20

Special: Automation in the Packing Industry

S2Publication Date: 09.04.20



Special Issue

HANNOVER MESSE: Industrial TransformationWith focus on:

Automation; Motion & Drive; Digital Ecosystems; Energy Solutions

Hannver FairHanover, 20.04. – 24.04.20

Media Kit Journal4

2020

Issues and Deadlines

Discrete Manufacturing and Machine Automation

Process Automation and Energy Automation

Drive Engineering and Switching Technology

Components and Periphery

Fairs and Events

1-2Publication Date:18.02.20



IoT-Gateways and IoT-Controllers

Decentralized Automation Components

Identifying Systems (RFID, Barcode, Scanner, Traceability)

Field Busses, Industrial Ethernet, TSN and OPC UA

Optical and Vision Sensors

Interdisciplinary Engineering

Process Control Technique for Power Stations and Networks

IT Solutions for Power Transmission

M2M and Remote Maintenance

Industrial Bus Systems and Remote IO

Scada and Process Control Systems

Diagnosis and Predictive Maintenance

Switches, Contactors, and Relays

Frequency Converters, Drive Control, and Motion Control

Peripheral Drives

AC-, DC- and Gear Motors

Cables, Insulated Cords, and Fiber-Optic Cables


Smart IO Components

Housings and Cabinets for Decentralized Automation

Data Collection, Measurement Processing and Recording

CAD/CAE and Engineering Tools

EMC, Lightning and Overvoltage Protection

MaintenanceDortmund, 12.02. – 13.02.20

Embedded WorldNuremberg, 25.02. – 27.02.20

VDE Tec Summit Berlin, 26.02. – 27.02.20

All About AutomationFriedrichshafen, 04.03. – 05.03.20

Special: Embedded Systems, Embedded Computing, IoT




Special Issue

Components for the Control CabinetIndustrial Housings and Cabinets, CAD/CAE, Climatisation, Switching Power Supplies,

Switches, Relays, Push-Buttons, Contactors and Fuses, Drive Protection,Cables and Wires, Cable Assemblies, Busbar Connection Systems,

Interface Technology, Connectors and Clamps, Multimeters, Infrared Measuring Equipment, Tools, Engineering, Labeling Systems,

Panel Meters, Measuring InstrumentsType-Approved Switchgear and Accessories, Energy Sorage Solutions

Light+Building Frankfurt/M., 08.03. – 13.03.20

Energy Storage EuropeDüsseldorf, 10.03. – 12.03.20

T

Editorial Calendar




PLC, Controller, and PC-Based Control Systems

Industrial Communication and Interfaces

MES and IT-Supported Optimization of Production

Digital Transformation in the Field

Smart Sensors in the Production

Energy Automation, Virtual Power Plants and Grid Stability

Energy Management

M2M, Remote Control, and Remote Maintenance

Industrial Security

Electric Safety Technology

Small and Compact Drive Systems

Safety Solutions of Drive Technologies

Frequency Converters and Servo Drives

Safety Relays and Safety Components


Testing and Measuring

Push Buttons



AutomaticaMunich, 16.06. – 19.06.20

DrupaDüsseldorf, 16.06. – 26.06.20

Sensor + TestNuremberg, 23.06. – 25.06.20

ZellchemingFrankfurt/M., 23.06. – 25.06.20

Automation Baden-Baden, 30.06. – 01.07.20

Special: Robotics, Assistance Systems & Handling Automation




Panel-, Rack-, Box- and Embedded-PC

Position and Rotary Encoders

Mobile Operating Systems

Condition Monitoring and Stateful Maintenance

S7 Compatible Control Solutions

Safety-Engineered Automation

Industrial Ethernet

Scada Systems, Process control and Visualization Systems

Components for Hazardous Areas

Life Cycle Management


Energy-Efficient Drive Technologies

AC-, DC- and Gearbox Motors

Switchboard Plants and Periphery

Connectors and Clamps

Cooling Systems and Climate Control

Cables, Insulated Cords, and Fiber-Optic Cables

Industrial Ethernet Infrastructure Components

Signalling Devices

Special: IoT Controllers and Cloud Solutions




Decentralized Automation Components

Compact Controllers

Data Acquisition and Processing

Optical and Color Sensors

IO-Link, Automation ML, MQTT and OPC UA

Codesys Products for Automation

Industrial Security

Remote IO Systems

Measurement and Regulation of Temperature

Industrial Bus Systems and Remote IO

Smart Measurement Technologies

Web and Cloud Technologies

Soft Starter and Motor Protection Equipment

Servo Drives



Cabinets, Industrial Housings, and Electronical Packaging

Lightning and Overvoltage Protection, EMC


Measuring Systems in the Cabinet

Labeling Systems

Components for the DC Industry

Husum WindHusum, 10.09. – 13.09.19

MSR-SpezialmesseLudwigshafen, 18.09.19

EMOHanover, 16.09. – 21.09.19

All About AutomationLeipzig/Schkeuditz, 11.09. –12.09.19

efaLeipzig, 18.09.-20.09.19

Special: Electrical Engineering and Automation in Maritime and Mobile Applications

Media Kit Journal6

2020






Fairs and Events




Safety-Engineered Automation

Industrial Bus Systems, Industrial Ether net, TSN, and OPC UA


IoT Gateways and IoT Controllers

Visualisation Systems

Industrial Vision Systems

Digital Twins

Augmented Reality


Scada and Process Control Systems

Supply Isolators, Measurement Transducers, and Isolation Amplifiers

Remote IO Systems andModular Automation

Controllers

Drive Control Systems

Linear Drives and Compact Drive Systems

Peripheral Drives


Cables, Wires, and Screwed Cable Glands


Lightning and Overvoltage Protection,EMC



Energy Storage

Materials, Insulation Material

The Smarter E Europe/Intersolar Munich, 17.05. – 19.05.20

All About AutomationEssen, 27.05. – 28.05.20

MSR-Spezialmesse RheinlandLeverkusen, 27.05.20

SPS Italia – smart production solutionsParma/Italy Servparc

Frankfurt/M., 17.06. – 18.06.20

Servparc

Frankfurt/M., 17.06. – 18.06.20

Servparc

Frankfurt/M., 17.06. – 18.06.20

, 26.05. – 28.05.20

CWIEMEBerlin, 26.05. – 28.05.20




Special Issue



Interface Technology, Connectors and Clamps, Multimeters, Infrared Measuring Equipment, Tools, Engineering, Labeling Systems, Panel Meters, Measuring Instruments

Type-Approved Switchgear and Accessories

Ligna Hanover, 27.05. – 31.05.19

Cired Madrid/Spain, 03.06. – 06.06.19

All About Automation Essen, 05.06. – 06.06.19

MSR-Spezialmesse Hamburg, 19.06.19

T

Editorial Calendar




Integrated Automation Systems

Industrial Computing and Panel-PC

Industrial Bus Systems and Industrial Ethernet

Integrated Engineering and Simulation Software

Operating, Monitoring, and HMI

Big Datat and Cloud Applications

Industrial Security




Energy Measurement Technologies

Seamless Communication for the Energy Automation

Energy-Efficient Drive Technologies

Direct Drives

Special and Compact Drive Systems

Drive Control Systems

Drives with Integrated Safety Functions

Low Voltage and Protection Technologies

Signalling Lamps and Indicator Lights

Cables, Wires, and Power Supply Systems

Components for Power Electronics

Data Collection, Measurement Processing and Recording

Push Buttons

Industrial Ethernet Infrastructure Components

K MesseDüsseldorf, 16.10. – 23.10.19

MSR-SpezialmesseLandshut, 23.10.19

Special: 140 Years etz – Anniversary Edition




Special Issue



Interface Technology, Connectors and Clamps, Multimeters, Infrared Measuring Equipment, Tools, Engineering, Labeling Systems, Panel Meters,

Type-Approved Switchgear and Accessories

EnergyDecentralHanover, 17.11. – 20.11.20

SPS smart production solutionsNuremberg, 24.11. – 26.11.20

Media Kit Journal8

2020






Fairs and Events





IoT-Gateways and IoT-Controller

Wireless Automation and 5G


Human-Robot-Cooperation

Vibration Measurement and Monitoring

Artificial Intelligence and Data Analytics

M2M, Remote Control and Remote Maintenance

Supply Isolators, Measurement Transducers, and Isolation Amplifiers

Energy Management

Modular Automation


Integrated Drive Solutions

Linear Drives

Motion Control

Safety Relais and Components

Smart IO Komponents

Energy Supply Systems

Cabinets, Industrial Housings, and Electronical Packaging for Distributed Automation


WindEnergyHamburg, 22.09. – 25.09.20

Powtech Nuremberg, 29.09.-01.10.20

MotekStuttgart, 05.10. – 08.10.20

Special: Smart EnergyEnergy Automation, Energy Measuring Equipment,

Energy Management and Renewable Power Generation

T

Editorial Calendar

The Transmedia Concept

S5Publication Date: 17.11.20Advertisements: 28.10.20Editorial Submissions: 01.10.20

Special Issue

Innovations at the SPS IPC DRIVESAll about Electrical Automation and Drive Technology as well as Digitization Solutions

in Engineering and Plant Manufacturing with a lot of Practical Stories

SPS IPC DrivesNuremberg, 26.11. – 28.11.19

Special: Digital Ecosystems, Industrie 4.0, and IoT

12Publication Date:11.12.20


Editorial Submissions:02.11.20


LPC and PC-Based Control Systems

Rotary Encoders

Integrated Engineering and Simulation Software

Modular Automation for Batch Size 1

S7-PLC Periphery

Artificial Intelligenceand Data Analytics

Process Sensors (pressure, mass flow, and filling level)

Scada Systems, Process Visualization Systems, Control and Monitoring Systems

Energy Automation, Smart Grid and Smart Metering

Grid Quality and Monitoring

Energy Management

Motion Control

Safety Technology


Small and Compact Drive Systems


Interface Technology

Cabinets, Industrial Housings, and Electronical Packaging for Distributed Automation

Special: Best of Automation 2020




7/2019www.etz.de

A810

0

newsletter 8/2019

Anzeige

ULTRA FAST AUTOMATION1µs REAKTIONSZEIT



AnzeigeEinstieg in die Highend-Messtechnik:Präzise, schnell, robust

Anzeige

AB SOFORTLIEFERBAR!


ASi-5AUTOMATISIERUNGNEU GEDACHT.

BW_Transformer_ASi_5_190x30.indd 1

12.12.18 10:32





den Distributor im „Atrium Plaza“ (Bild) in der Mainzer Landstraße 180. Als Schrittmacher des B2B eCommerce findet RS Components in Frankfurt am Main nicht nur das Umfeld für zukünftiges Wachstum, der Umzug steht auch im Zeichen einer geistigkreativen Erneuerung.mehr ...



zeichnis ermöglicht Interessierten die Suche nach Messgrößen, nach Schlagwörtern oder die gezielte Suche nach AMAMitgliedern, die in alphabetischer Reihenfolge mit Kontaktdaten und Sortiment abgebildet werden.mehr ...



rige Erfolgsgeschichte zurück. Aktuell beliefert evg rund 5.000 Kunden mit einem Sortiment von über 60.000 Produkten mar k t f üh rende r Hersteller. Zu den Meilensteinen seit der Jahrtausendwende zählen der Neubau eines Logistikzentrums sowie die Inbetriebnahme eigener Spritzgießanlagen nebst Werkzeugbau.mehr ...

50 Jahre evg

8/8/8 2019

Mehr darüber und zu dem was sich sonst noch in der Welt der Automa


IHR WEGDIE DIGITALE ZUKUNFT.

-5AUTOMATISIERUNGNEU GEDACHT.


Der AMA Verband für Sensorik und Messtechnik (AMA) hat seinen Branchenführer 2019/20 veröffentlicht. Die Broschüre (135 Seiten in mehr als 1.000 verschiedenen Kategorien über die Sensoren, Messtechnik und Dienstleitungen der 450 Mitglieder aus Industrie und Wissenschaft. Das Verbandsver


Media Kit Journal10

2020

T

Editorial Calendar






Fairs and Events

11Publication Date:03.11.20


Editorial Submissions:18.09.20

Sensors and Proximity Switches

Operating and Monitoring/HMI

LPC and PC-Based Control Systems

IoT-Gatewaysand IoT Controller

Industrial Ethernet and Industrial Bus Systems


Panel- and Embedded PC

MES and IT-Supported Optimization of Production

Codesys Products

Digital Transformation in the Field

Scada Systems and Process Control Systems

Process Data Communications

Energy Management

Condition Monitoring and Diagnostics

Industrial Security


Integrated Drive Solutions

Peripheral Drives


Displays, Monitors, and Control Units

Testing and Calibrating


Power Semiconductors


Connectors and Clamps

Vision Stuttgart, 10.11. – 12.11.2020

electronicaMunich, 10.11. – 13.11.20

Brau BevialeNuremberg, 10.11. – 12.11.20

FormnextFrankfurt/M., 10.11. – 13.11.20

SPS smart production solutionsNuremberg, 24.11. – 26.11.20

PMR expoCologne, 24.11. – 26.11.20

Special: Safety & Security in Automation

Media Kit Journal13

2020

P

Rate Card No. 68valid from January 1st, 2020

Average of actually distributed circulation:23,816 copies

2 Preferential PlacementsTitle Page: (1/1 page 4c) € 8,250.–Four-colored only. The price includes a 4c picture repetition and a legend in the table of contents. No discounts can be given. Size of the picture 200 mm width and 190 mm height. Please be aware that the address label will be pasted at the bottom on the left-hand side. Closing date and binding closing day for printing material (electronic fi le): 5 weeks before publication date.

Inside Front Cover: (Format: 185 mm × 175 mm) € 4,350.–Advertorial: (1/2 page 4c) € 2,550,– (1/1 page 4c) € 3,600.–Page 2., Inside Back Cover and Back Cover: (1/1 Seite 4c) € 7 850.–Binding Placement: € 235.–

The Title Page image and the Inside Front Cover must fi t into the journal‘s editorial standard. Please contact the editorial staff in case of queries.

3 Discounts: On purchase within one year, starting with the publication of the fi rst advertisement. Only one discount scale can be applied.

Frequency Scale: 2 × 3 % 3 × 6 % 5 × 10 % Volume Scale: 2 pages 5 % 3 pages 10 % 5 pages 12 % 4 Recruitment and Classifi ed Advertisements:

Discounts refer to the basic b/w price. (No additional discounts can be given.) Classifi ed Advertisements 15 %* Job Advertisements 50 %* Box Number Charge € 9.00 5 Special Advertisements: (Technical Information on pages 17and 18) Bound-In Inserts: Discount: 1 sheet = 1 advertisement page.

Paper Weight 2-sided 4-sided 6-sidedup to 100 g/m2 € 5,740.– € 8,565.– € 11,485.– up to 140 g/m2 € 6,790.– € 9,490.– € 12,875.– up to 180 g/m2 € 7,040.– € 10,325.– € 13,860.–

Multiple pages and more than 180 g/m² upon request.

Loose Inserts: Inserts up to 25 g (no discounts): € 300.00 ‰Inserts with a higher weight upon request.Prices include postage. Inserts with a thickness of 3 mm up to 30 mm require additional postage.

Affi xed Reply Postcards/Samples, etc.: Affi xed Reply Postcards are charged as inserts.

We charge up to 25 g € 102.50 ‰(higher weights on request) Charge for gluing € 91.50 ‰

6 Contact for Advice, Booking:Ronny Schumann, Advertising ManagerPhone + 49-69-84 00 06-13 40, Email [email protected]

7 Terms of Payment/Bank Accounts:Weberbank Actiengesellschaft, Berlin, Acc. No. 6 123 549 039, BIC 101 201 00, IBAN DE36 1012 0100 6123 5490 39,SWIFT/BIC WELADED1WBB

UniCredit Bank AG, Berlin, Acc. No. 2 668 386, BIC 100 208 90, IBAN DE 78 1002 0890 0002 6683 86, SWIFT/BIC HYVEDEMM488

Payments are due in full within 30 days. The Publisher reserves the right to demand advances from new customers.

*= on delivery of electronic advertising fi les only

Media Kit Journal12

2020

P

Rate Card No. 68valid from January 1st, 2020

Average of actually distributed circulation:23,816 copies

1 Advertising Sizes and Prices: (Please add the appropriate value added tax to all prices, if applicable)

Format Width × Height in mm Price b/w Price 2c Price 4cBleed

(add 3 mm bleed size on all four rims)

Type Area(column spacing: 6 mm)

2/1 pages (Spread A4) 420 × 297 € 9,815.– € 10,465.– € 11,615.–

1/1 page (A4) 210 × 297 170 × 248 € 5,320.– € 5,975.– € 7,125.–

Juniorpage 150 × 210 125 × 186 € 3,335.– € 3,990.– € 5,155.–

1/2 page vertical 107 × 297 82 × 248 € 2,755.– € 3,415.– € 4,570.–

1/2 page horizontal 210 × 148 170 × 121 € 2,755.– € 3,415.– € 4,570.–

1/3 page vertical 78 × 297 53 × 248 € 1,810.– € 2,475.– € 3,630.–

1/3 page horizontal 210 × 103 170 × 78 € 1,810.– € 2,475.– € 3,630.–

1/4 page 107 × 146 82 × 121 € 1,410.– € 1,730.– € 2,320.–

1/4 page vertical 52 × 297 38 × 248 € 1,410.– € 1,730.– € 2,320.–

1/4 page horizontal 210 × 82 170 × 57 € 1,410.– € 1,730.– € 2,320.–

1/8 page 107 × 82 82 × 57 € 720.– € 1,030.– € 1,600.–

1/8 page vertical 52 × 146 38 × 121 € 720.– € 1,030.– € 1,600.–

1/8 page horizontal 210 × 40 170 × 26 € 720.– € 1,030.– € 1,600.–

price per mm for special sizes € 5.36 € 6.25 € 8.14

Media Kit Journal15

2020 Formats and Technical Information

F

1 Size of Journal: 210 mm wide, 297 mm high, DIN A4Full Page Type Area: 170 mm wide, 248 mm high

4 columns each 38 mm wide

2 Printing and Binding: Offset printing (sheets or rolls), saddle stitch or glue binding is used.

3 Electronic Data Submission: For digital media please use our email address [email protected] or send a CD-ROM/DVD. Please remark on Delivery Note:– order name/name and issue of publication– fi nal output format (specify a bleed of 3 mm, if applicable).

4 Data File Formats: We recommend the delivery of PDF data fi les. In addition, the following programs are supported: – Adobe Indesign/Photoshop/Illustrator up to Version CC– Microsoft Word up to Version 2016At least the fi le must be ready to be printed: all fonts needed have to be in-cluded, contiunuos-tone pictures require a resolution of 300 dpi and line art pictures at least of 600 dpi. No password protection.

5 Color Processing: Process colors (CMYK) according to ISO 12647-2 (PSO), special colors on request. Our standard offset profi le is „Coated FOGRA39 (ISO 12647-2:2004)“ of ECI.

6 Proof: Color proofs for “standard print media” (bvdm). Digital proofs need to have the Fogra media wedge included to verify the color accuracy (availa-ble for purchase at the www.fogra.org). Proofs must have an offi cial print control strip.

7 Data Archiving: Data will be archived, therefore unchanged repetitions are possible. However, a guarantee on data archiving is not provided.

8 Guarantee: Upon delivery of incomplete or incorrect data (text, colors, images), we assume no liability for printing results. Exposure errors due to incomplete or corrupted data fi les, incorrect preferences or incomplete information will be charged. This also applies to additional composition or reproduction work and for the consequences of incorrect proofs.

9 Contact: Leonie Ströver, Order ManagementPhone + 49-69-84 00 06-13 42 Email [email protected]

Requirements for a Smooth Production FlowIf not delivering a PDF/X-3 data fi le:Please make sure that all fi les and data necessary for reproduction are included. All TIFF or EPS picture fi les (including logos) have to be supplied. Do not save fi les in JPEG or GIF Format.Please make sure that all fonts used (in EPS fi les as well) are included or supplied additionally as printer and screen fonts.We are not able to modify or correct any Postscript fi les.

For color advertisements you may only use the process colors cyan, magenta, yellow and black (CMYK), no RGB colors. If you are using special spot colors it must be denoted clearly as they have to be printed in a seperate form and they are charged seperately.

Please include a binding proof/laser printout.

Media Kit Journal14

2020

P

Product Advertorial PLUSThe smart solution for your company advertisement (print and newsletter ad)

Your Advantages with Product Advertorial PLUS + 1/4 product ad in etz + 1/4 online ad in etz-newsletter + thematic positioning + far reach for your product advertisement

We create print- and online-compatible product advertisements in a basic layout (format: 1/4 page, 4c within typing area, 82 mm × 121 mm) for € 940.–.

We Design Your AdvertisementWe only need your company logo, an image and a short description of your product (max. 500 characters) as well as a link for the newsletter ad. Of course, you‘ll get a galley proof before printing. If you want to design your ad yourself, please provide the print fi les in the format 82 mm × 105 mm (w × h) and we will incorporate them in the basic layout. The ads will be published in the etz in the following thematic areas. They will also be published in the next newsletter as well (format: 82 mm × 121 mm).

Issue PublicationDate

Advertise-ments

EditorialSubmissions

Topics

1-2 18.02.20 29.01.20 02.01.20 Embedded Systems & IoT Cables, Wires, and Plug Connections

3 02.03.20 11.02.20 16.01.20 Industrial Bus & IO Link Components Power Supply/UPS/Power Units

4 09.04.20 13.03.20 18.02.20 Industrial Ethernet Products Displays, Monitors, and Control Units

S2 09.04.20 20.03.20 25.02.20 Industrial Computers & Panel PC Components for the Control Cabinet

5 15.05.20 24.04.20 30.03.20 Rotary Encoders Cables, Wires, and Plug Connections

6 05.06.20 14.05.20 17.04.20 Industrial PC Smart Sensors

7 10.07.20 22.06.20 28.05.20 CAD/CAE & Engineering Tools LPC & Controllers

8 28.08.20 10.08.20 15.07.20 Smart Sensors IoT Gateways & IoT Controllers

9 16.09.20 27.08.20 03.08.20 Safety Components Industrial Ethernet Products

10 13.10.20 23.09.20 28.08.20Drive Technology

Operating and Moderating/Process Visualization

11 03.11.20 14.10.20 18.09.20 Frequency Converters & Servo Drives HMI/Scada

S5 17.11.20 28.10.20 01.10.20 IoT Gateways Industrial Bus & IO Link Components

12 11.12.20 26.11.20 02.11.20 LPC & Controllers Industrial Computers & Panel PC

MANAGED & UNMANAGED · 10/100/1000TX | 4-, 8-, 16-Port | 24 VDC | Hutschiene

POE & LWL · Full Gigabit | max. 60 W PoE | Splitter, Injector, Extender

WALL MOUNT · 10/100/1000TX, Gigabit-SFP | managed per LCD Touch | flach

www.spectra.de/Planet

INDUSTRIAL SWITCHES

Spectra GmbH & Co. KG Mahdenstraße 3D-72768 Reutlingen

Tel. +49-71 21-14 32-10 Fax +49-71 21-14 32-190 [email protected]

Gateways für Industrie und Gebäudeautomatisierung

• Kompakte Bauweise• Flexibel einsetzbar durch großen Temperaturbereich

von -40 °C bis +85 °C• Einfachste Anbindung an Ihre GLT• Galvanische 3-Wege-Trennung• Software: einfach, intuitiv, kostenlos!

wachendorff-prozesstechnik.de/gatewaysWachendorff Prozesstechnik GmbH & Co. KG

Industriestrasse 7, 65366 Geisenheim

Tel. +49-67 22-99 65-5 44, E-Mail: [email protected]

www.wachendorff-prozesstechnik.de

Media Kit Journal17

2020 Formats and Technical Specifi cations Bound-In Inserts

F

3 mm

6 mm

Bound-In Inserts: Prior to the fi nal acceptance we need a sample (or at least a dummy with the expected weight and dimensions) of the planned bound-in inserts. Bound-in inserts are only allowed if they promote the sales program of one company only. According to postal regulations they must be designed in such a way, that they cannot be misinterpreted as editorial pages. The placement of bound-in inserts is constrained to the technical possibilities. Bound-in inserts printed on a non-paper material are only allowed if the publisher has the consent of the postal authorities.

Formats: Each sheet 306 mm high, 213/216 mm wide(including bleed: 6 mm at the head, 3 mm at the foot, 3 mm at inner and outer edge with adhesive binding or 3 mm at outer rim only with wire stitching.

Copies required: 24,200 copies

Technical Specifi cations: The bound-in inserts are to be delivered untrimmed (and folded, if applicable). The front page of the inserts have to be clearly marked. They have to be ready for insertion without the need of further work. If any additional folding and/or gluing work is necessary, it will be charged seperately. If the insert consists of several pages, it has to be folded in such a way, that it is closed in the direction of the fold (direction of the insertion). Otherwise extra costs have to be charged.

Delivery Address: Prepaid delivery, untrimmed and ready for insertion, with delivery note “For ‘etz‘ Edition … (No.)” to:

Druckerei Heenemann GmbH & Co. KGBessemerstr. 83 – 91 · 12103 Berlin ∙ Germany

432 mm untrimmed**

426 mm untrimmed*

213 untrimmed*

216 untrimmed**

306

mm

unt

rim

med

4 pages

Fold with 3 + 3 mm**/without* grind off

210 trimmed

297

mm

tri

mm

ed

3 mm

6 mm

213 mm untrimmed*

216 mm untrimmed**

210 trimmed

2 pages

306

mm

unt

rim

med

297

mm

tri

mm

ed

3 mm grind off**

6 mm

620 mm untrimmed**

614 mm untrimmed*

206 untrimmed

Fold with 3 + 3 mm**/without* grind off

195 mm

3 mm

6 mm

Fold

297

mm

tri

mm

ed

306

mm

unt

rim

med

6 pages parallel fold

* wire stitching only ** adhesive binding only

Media Kit Journal16

2020

F

Formats and Technical Information

Type Area:170 × 248 mmBleed:210 × 297 mm

Type Area:53 × 248 mm

Bleed:78 × 297 mm

1/2 page

vertical


Bleed:107 × 297 mm


Bleed:210 × 103 mm


Bleed:210 × 148 mm


Bleed:52 × 297 mm

Juniorpage


Bleed:150 × 210 mm


Bleed:107 × 146 mm


Bleed:107 × 82 mm


Bleed:210 × 82 mm

Bleed:420 × 297 mm

Spread A4 1/1 page A4

1/2 pagehorizontal

1/3 pagever-tical

1/3 pagehorizontal

1/4 page ver-tical

1/4 page 1/4 page

horizontal1/8

page

Media Kit Journal19

2020

1 Circulation Monitoring:

2 Circulation Analysis: Average number of copies (July 1st, 2018 – June 30th, 2019

(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/2019

Copies Printed: 24,000

Actual Distributed Circulation (ADC): 23,816 thereof abroad: 498 thereof late entries

from previous reporting periods: 0

Sold Copies*: 1,296 thereof abroad: 112 – by subscription*: 1 227 – other sales*: 173 thereof member-copies: 159 – individual copies sold: –

Free Copies*: 22,501

Surplus, Archive, and Specimen Copies*: 184

3 Geographical Distribution Analysis:

Economic Area Percentage of actual distribution

% Copies

Federal Republic of Germany 97.91 23,318 Foreign countries (mainly Austria and Switzerland) 2.09 498

Actual Distributed Circulation (ADC) 100 23,816

Circulation and Geographical AnalysisAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/20192

* Source: IVW quarterly reports 2nd Quarter 2019

Media Kit Journal18

2020 Formats and Technical Specifi cations Loose Inserts, Affi xed Advertising Media

F

Loose Inserts: Prior to the fi nal acceptance we need a sample (or at least a dummy with the expected weight and dimensions) of the planned inserts. Loose inserts are only allowed if they promote the sales program of one company only. According to postal regulations they must be designed in such a way, that they cannot be misinterpreted as editorial pages. The placement of loose inserts is constrained to the technical possibilities.

Insertion Note: A free note is included in the table of contents.

Copies Required: 24,200 copies.

Delivery Date: Up to 10 days after the deadline for advertisements, see schedule and editorial calendar.

Format: Maximum 205 mm wide × 292 mm high

Delivery Address:Delivery of the inserts by trucks with tail-lift only, freight paid and ready for insertion, with delivery note “For ‘etz’ Edition … (No.)” to::

Scholz | Direct · Kundenmanagement · Richard Scholz GmbHBessemerstr. 38 – 42 · 12103 Berlin ∙ Germany

Technical Specifi cations: Loose inserts have to be composed of one piece and must be ready for insertion without further treatment. If any additional work (e. g. folding) is necessary, it will be charged seperately. Inserts printed on a non-paper material are only accepted after presentation of a fi nal sample and if the publisher has the consent of the printing shop and the postal authorities. If the insert consists of several pages, it has to be folded in such a way, that it is closed in the direction of the fold (direction of insertion).

Affi xed Advertising Media: Affi xed Reply Postcards are charged as inserts: We charge up to 25 g € 102.50 ‰(heigher weights on request) Charge for gluing € 91.50 ‰

Other advertising material (samples, CD/DVD, etc.) is charged as loose insert.

Copies Required: 24,200 copies

Delivery Address for Affi xed Advertising Media:Prepaid delivery and ready for insertion, with delivery note “For ‘etz‘ Edition … (No.)” to:

Druckerei Heenemann GmbH & Co. KGBessemerstr. 83 – 91 · 12103 Berlin ∙ Germany

Glu

ed E

dge

Direction of Insertion

70 mm

Media Kit Journal21

2020

3-E

Structural Analysis of RecipientsAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/2019

1 Economic Branches

WZ 2008 Code Branches Percentage

35, 36 Energy Supply, Water Supply, Mining 4.20 %

20, 21 Chemical and Pharmaceutical Industry 2.70 %

24, 25 Metal Production and Processing 3.10 %

26, 26.1, 27, 27.1, 27.3 Electrical Engineering, Electronics 17.60 %

26.5 Measurement and Control Technology, Automation Technology 23.30 %

28 Mechanical and Plant Engineering 21.30 %

29 Automotive Industry 2.80 %

62, 71 Engineering Consultants, Software Companies, Systems Houses, Systems Integrators 7.20 %

10, 11 Food and Beverage Industry 2.00 %

85, Sonstige (Others) Other, Education and Training, Universities 5.50 %

99999 Branches according to EDA not collected 2.20 %

Other Branches e. g. Self-Employed Persons 8.00 %

Rounding-off Difference 0.10 %

Actually Distributed Circulation 100.00 %

Media Kit Journal20

2020 Circulation and Geographical AnalysisAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/20192

Classifi cation of the Copies per Region:

Federal States Percentage ofactual distribution

Percentage Copies

Baden-Württemberg 21.50 % 5,124

Bavaria 14.40 % 3,429

Berlin 2.20 % 525

Brandenburg 1.40 % 335

Bremen 0.60 % 146

Hamburg 1.20 % 292

Hesse 10.00 % 2,373

Mecklenburg-Western Pomerania 0.70 % 162

Lower Saxony 6.80 % 1,622

North-Rhine Westphalia 19.20 % 4,567

Rhineland-Palatinate 4.70 % 1,109

Saarland 1.40 % 335

Saxony 3.50 % 839

Saxony-Anhalt 1.20 % 294

Schleswig-Holstein 2.20 % 530

Thuringia 1.80 % 439

Abroad 2.10 % 498

Others*) 5.00 % 1,196

Rounding Difference 0.10 % 1

ADC (annual average) 100.00 % 23,816

Nielsen Area Percentage ofactual distribution

Percentage Copies

Nielsen Area 1 11.00 % 2,610

Nielsen Area 2 19.10 % 4,548

Nielsen Area 3 A 16.00 % 3,816

Nielsen Area 3 B 21.50 % 5,121

Nielsen Area 4 14.40 % 3,433

Nielsen Area 5 2.20 % 523

Nielsen Area 6 3.30 % 797

Nielsen Area 7 5.30 % 1,272

Abroad 2.10 % 498

Others *) 5.00 % 1,196

Rounding Difference 0.10 % 2

ADC (annual average) 100.00 % 23,816

*) Others = not analysed copies (e. g.: copies for fairs and events. book stores. individual copies sold. Postbox ZIP code in conjunction with federal states. etc.)

Media Kit Journal23

2020

3-E


Field of Acitivity

2.1 %

33.4 %

1.1 %

17.1 %

38.8 %

2.4 %

5.0 %

No Personal Data

Senior Management

Management of Branches, Plants, etc.

Department Head, Divisional Head

Professionals

Department (w/o Personal Address)

Others**)

Media Kit Journal22

2020

3-E


2 Position of the Recipients

WZ 2008 Code Function of the Personal Recipients Percentage

11 Senior Management 33.8 %

161, 33, 34 Planning, Consulting, Development 34.7 %

44, 51, 54, 56 Production & Quality Control 6.6 %

6, 72 Purchase, Sales 3.6 %

111 Technical Management 2.4 %

53 Automation, Process Measuring and Control Technology 0.4 %

97 Private Persons/Self-Employed Persons 1.4 %

99 Functions according to EDA not collected 5.0 %

Other Functions 7.2 %

Others 5.0 %

Rounding-off Difference – 0.1 %

Actually Distributed Circulation 100.0 %

25

2020

Media Kit Website

1 Advertising Sizes and Prices

Format Width × Height Pricein Pixel per month

Ad Layer (run of Site) as per agreement € 4,615.–

Billboard Banner (run of Site) 960 × 250 € 3,025.–

Wallpaper (Super Banner + Wide Skyscraper) (run of Site)

728 × 90 +160 × 600

€ 2,490.–

Page Peel (run of Site) 500 × 500 € 1,365.–

Wide Skyscraper (run of Site) 160 × 600 € 1,365.–Skyscraper (run of Site) 120 × 600 € 1,130.–

Super Banner (run of Site) 728 × 90 € 1,190.–

Full Banner Premium (run of Site)

468 × 60€ 915.–

Full Banner Top (on Homepage) € 620.–Full Banner Base (on Homepage) € 520.–

Medium Rectangle I(on Homepage)

300 × 250

€ 965.–

Medium Rectangle II (run of Site) € 1,130.–

Webcast/Whitepaper 3 months 6 months12 months

€ 830.– € 1,335.–€ 1,865.–

Advertorial – € 1,880.–

All banners are placed exclusively without rotation! On www.etz.de you can place, besides common ad formats, all ad formats of the “Universal Ad Package,” which is adopted by the Interactive Advertising Bureau (IAB) and the European Interactive Advertising Associa-tion (EIAA) for Europe.Ad Layers are designed in consent with the publisher. By appropriate click buttons they dont‘t interfere with the user experience when reading the web site.

2 Discounts: –

3 Sections: News Web-StoreProducts Market Surveys

Technical Articles Media Branches Newsletter etz@tour Glossary

4 Special Topics: Wind Energy, Photovoltaic, Shipbuilding,Smart Energy, E-Mobility, Packaging

5 Terms of Payment/Bank Accounts: Weberbank Actiengesellschaft, Berlin, Acc. No. 6 123 549 039, BIC 101 201 00,

IBAN DE36 1012 0100 6123 5490 39, SWIFT/BIC WELADED1WBB



Metrics

1 Control: –

2 Metrics: 174,454 Visitors; 232,881 Page impressions per yearSource: Google Analytics (October 2018 – September 2019)

Advertising Rates/Metrics

P - N

24

2020

1 Web Address: www.etz.de

2 Short Summary: The technology and practice based orientation of the journal etz is refl ected in its

website. On a daily basis the newest products in the fi elds of industrial electrical engineering, automation and drive industry as well as test and inspection techniques are published in a contemporary way. The information portal is replenished with business news related to electrical engineering, energy and automation industry as well as a calendar with important events and market surveys. In the section “Branchen” (branches) all branch-specifi c product news and in-depth articles are found related to photovoltaics, wind energy, shipbuilding, smart grids and packaging.

3 Target Group: www.etz.de provides engineers and technicians in the fi eld of discrete manufacturing &

machine automation, electrotechnical and supply industry valued information as a basis for the decision making process in their professional fi eld.

4 Publishing House: VDE VERLAG GMBHKaiserleistraße 8 A · 63067 Offenbach · Germanywww.vde-verlag.de

Editors: Dipl.-Ing. Ronald Heinze, Editor-in-ChiefDipl.-Ing. Frank Nolte, Deputy Editor-in-ChiefPhone +49-69-84 00 06-13 31, Fax -13 98Email [email protected]

Online Advertising: Ronny Schumann, Advertising ManagerPhone +49-69-84 00 06-13 40, Fax -13 98Email [email protected]

Media Kit Website

Profi leSubhead

1Super Banner728 × 90 Pixel

Page Peel500 × 500 Pixel

Wide Skyscraper160 × 600 Pixelor Skyscraper120 × 600 Pixel

Medium Rectangle II300 × 250 Pixel

Full Banner Premium468 × 60 Pixel

Billboard Banner960 × 250 Pixel

Full Banner Top468 × 60 Pixel

Medium Rectangle I300 × 250 Pixel

Full Banner Base468 × 60 Pixel

Media Kit Newsletter27

2020

1 Name: etz Newsletter

2 Short Summary:

The PDF Newsletter gives its readers short informations on brand-new products, technical articles, news and events in the industry sectors Electrical Engineering, Automation and drive technology, Process and Electric Power Industry as well as Test and Inspection Techniques. Each information is linked to more detailed information on our website giving a fast in-depth approach to the subject.

3 Target group:

The etz Newsletter provides engineers and technicians in the fi eld of discrete manufacturing & machine automation, electrotechnical and supply industry valued information as a basis for the decision making process.

4 Frequency: monthly

Publication Dates:• 1/2020: 29.01.2020• 2/2020: 26.02.2020• 3/2020: 25.03.2020• 4/2020: 29.04.2020• 5/2020: 27.05.2020• 6/2020: 24.06.2020• 7/2020: 29.07.2020• 8/2020: 26.08.2020• 9/2020: 30.09.2020• 10/2020: 28.10.2020• 11/2020: 18.11.2020• 12/2020: 16.12.2020

5 Publishing House: VDE VERLAG GMBHKaiserleistraße 8 A · 63067 Offenbach · Germanywww.vde-verlag.de

Editors: Dipl.-Ing. Ronald Heinze, Editor-in-Chief Dipl.-Ing. Frank Nolte, Deputy Editor-in-Chief Phone +49-69-84 00 06-13 31, Fax -13 98 Email [email protected]

Online-Advertising: Ronny Schumann, Advertising Manager Phone +49-69-84 00 06-13 40, Fax -13 98 Email [email protected]

newsletter 8/2019

Anzeige

Liebe newsletter-Leserinnen und -Leser,

die Zeit ist reif für einen Wandel. Das

scheinen sich jedenfalls einige Unter

nehmen in den letzten Monaten ge

dacht zu haben und sind dabei sich

zu ändern, beispielhaft sei hier nur

die neue Unternehmensstruktur von

Turck oder die neue Zentrale von RS

Components genannt.

Mehr darüber und zu dem was sich

sonst noch in der Welt der Automa

tion und Elektrotechnik im vergange

nen Monat ereignet hat sowie anste

henden Veranstaltungen, erfahren

Sie wieder in diesem etznewsletter.

Bei der Lektüre wünschen wir Ihnen

wieder viel Vergnügen, Ihr etzTeam Anzeige

Anzeige

IoT Analytics, Spezialist für Studien

und Marktübersichten rund um die

Themen Internet of Things (IoT),

M2M und Industry 4.0, hat Endan

wender nach ihren Erfahrungen mit

IoTPlattformen gefragt. Die Ergebnis

se wurden jetzt in dem 184Seiten

umfassenden IoT Platforms End User

Satisfaction Report 2019 veröffent

licht. Der Report will die Transparenz

in dem Markt für IoTPlattformen ver

bessern und ranked die Plattformen

(sowohl für die Telekommunikation

als auch für die Industrie) nach der

Kundenzufriedenheit basierend auf

über 800 Datenpunkten. mehr ...


Der globale Multi

ChannelAnbieter

von Produkten und

Lösungen aus dem

Bereich Industrie

und Elektronik, RS

Components (RS)

verlässt nach über

20 Jahren Mörfelden und zieht vom

Frankfurter Stadtrand in das pulsie

rende Herz der Mainmetropole. Ab

dem 1. September 2019 findet man

den Distributor im

„Atrium Plaza“

(Bild) in der Mainzer

Landstraße 180.

Als Schrittmacher

des B2B eCommer

ce findet RS Compo

nents in Frankfurt

am Main nicht nur das Umfeld für

zukünftiges Wachstum, der Umzug

steht auch im Zeichen einer geistig

kreativen Erneuerung. mehr ...


Der AMA Verband für Sensorik und

Messtechnik (AMA) hat seinen Bran

chenführer 2019/20 veröffentlicht.

Die Broschüre (Bild) informiert auf

135 Seiten in mehr als 1.000 ver

schiedenen Kategorien über die Sen

soren, Messtechnik und Dienstleitun

gen der 450 Mitglieder aus Industrie

und Wissenschaft. Das Verbandsver

zeichnis ermöglicht In

teressierten die Suche

nach Messgrößen,

nach Schlagwörtern

oder die gezielte Suche

nach AMAMitgliedern,

die in alphabetischer Reihenfolge mit

Kontaktdaten und Sortiment abgebil

det werden. mehr ...


Im September 1969

gründeten Jörg R.

Martens und Fried

rich Hamacher die

ElektroVer triebs

Gesellschaft als In

dustrievertretung.

Kurz darauf stiegen

sie in das Distributionsgeschäft mit

Steckverbindern und elektromechani

schen Bauelementen ein. In diesem

Jahr blickt der ElektromechanikDis

tributor evg mit Stammsitz in Mön

chengladbach (Bild) auf eine 50jäh

rige Erfolgsge

schichte zurück.

Aktuell beliefert evg

rund 5.000 Kunden

mit einem Sorti

ment von über

60.000 Produkten

mar k t f üh rende r

Hersteller. Zu den Meilensteinen seit

der Jahrtausendwende zählen der

Neubau eines Logistikzentrums so

wie die Inbetriebnahme eigener

Spritzgießanlagen nebst Werkzeug

bau.mehr ...

50 Jahre evg

Title Ad (Head): 190 mm × 30 mm

1/8 page: 93 mm × 60 mm

Deadline for Ads: 7 days prior to publication date

1

Profi le

26

2020

Media Kit Website

1 File Formats: GIF, JPG, Flash (.swf), incl. fallback-GIF, max. 40 kB per fi le

2 Delivery Address: Please send your advertising material/fi les for your campaign to the following address: [email protected]

3 Delivery Deadline: 7 days before start of campaign

With this lead, we have enough time to test your fi les and to ensure a correct delivery of your campaign. Delays are otherwise not at our expense.

On delivering your fi les we need the following data:– customer name– campaign name– contact for questions/check back– Target-URL/Click-URL (not embedded in the .swf fi le)– Alt-Text/Title-Text (optional)

For Flash versions, we also need a GIF or JPG fi le as fallback of your advertising for users, who have no Flash installed.

Reporting: You can request an evaluation of ad impressions and ad clicks.

4 Contact: Leonie Ströver, Order ManagementPhone +49-69-84 00 06-13 42Email [email protected]

F

Formats and Technical Specifi cations

Super Banner728 × 90 Pixel

Page Peel500 × 500 Pixel

Wide Skyscraper160 × 600 Pixelor Skyscraper120 × 600 Pixel

Medium Rectangle II300 × 250 Pixel

Full Banner Premium468 × 60 Pixel

Billboard Banner960 × 250 Pixel

Full Banner Top468 × 60 Pixel

Medium Rectangle I300 × 250 Pixel

Full Banner Base468 × 60 Pixel


2020

1 File Formats: – Advertising for PDF newsletter: PDF fi les (Acrobat 8, all fonts

included, with at least 150 dpi CMYK pictures, no password protection) – Advertising for HTML Email: JPG, GIF (not animated),

max. 40 kB (72 dpi RGB picture fi les)

Please specifi y your target URL/link on delivery (e. g. your website)!

2 Format of the Newsletter: HTML, Text or PDF

3 Delivery Address: Please send your advertising material/fi les for your campaign to the following address: [email protected]

4 Delivery Deadline: 7 days before start of campaign

With this lead, we have enough time to test your fi les and to ensure a correct delivery of your campaign. Delays are otherwise not at our expense.

On delivering your fi les we need the following data:– customer name,– campaign name,– contact for questions/check back,– Target-URL/Click-URL,– Alt text/Title text (optional, only for the html email)

5 Contact: Leonie Ströver, Order Management Phone +49-69-84 00 06-13 42Email [email protected]

F

Formats and Technical Specifi cations

Title Ad (Head): 190 mm × 30 mm

Anzeige

Anzeige

Seit dem 1. August 2019 zeichnet der Ge-schäftsführer in der VDE-Gruppe, Wolfgang Niedziella (57) auch für das neu geschaffene Kompetenzcenter „Digitale Sicher-heit“ im VDE verantwortlich. In sei-ner Position führt der Elektroingeni-eur die in der VDE-Gruppe verteilten Kernkompetenzen – CERT@VDE von VDE/DKE, Smart Technologies vom VDE-Institut sowie Corporate Securi-ty vom VDE – zu einem organisa-tionsübergreifenden Geschäftsfeld zusammen. mehr ...

Neuer VDE-Leiter „Digitale Sicherheit“

Mit einer stärkeren Trennung der Gruppe in die Sparten Automati-sierungstechnik sowie Entwicklungs- und Pro-duktionsdienstleistun-gen will Turck sein Wachstum nach-haltig stärken. So sollen die Entwick-lungs- und Produktionskapazitäten mit der Fokussierung auf Technolo-gie-Schwerpunkte an bestimmten Standorten international ausgebaut werden. Christian Wolf (Bild), Ge-schäftsführer der Turck-Holding: „Wir wollen in Europa, Asien und Amerika optimale Strukturen für Produktion, Logistik und Vertrieb schaffen, um die lokalen Kundenbedürfnisse ideal abdecken zu können.” mehr ...

Neue Struktur bei Turck

Auf der Fachmesse Husum Wind ver-anstaltet der VDE VERLAG am 11. September 2019 in Halle 1 (1E16) das Forum „Innovative Steuerungs-technik und Predictive Maintenance für Windkraftanlagen“. Hier berich-ten hochkarätige Referenten aus Wirtschaft und Wissenschaft über die Themen Digitalisierung, Big Data und Cloudlösungen für Windkraftan-lagen. Das Themenfeld spannt den Bogen von intelligenter Rotorblatt-überwachung über steuerungsinte-griertes Condition Monitoring bis zu digitalen Services und datengestütz-ten Wartungskonzepten. mehr ...

Forum auf der Husum Wind

Vom 7. bis 10. Okto-ber 2019 zeigt die Section Factory Au-tomation von Yama-ha Motor Europe auf der Motek in Stuttgart Technologien zur Beschleunigung von Robotik-Pro-zessen, einschließlich der visuellen On-the-Fly-Inspektion und -Ausrich-tung. Auf dem Stand 7328 in Halle 7 können sich die Besucher u.a. über die Linear-, Mehrachs- und Scara-Roboter sowie die kartesischen Ro-

boter informieren, die es in vielen Grö-ßen und Konfigura-tionen gibt. Die auf der Messe ausge-

stellte Demonstration (Bild) läuft auf dem preisgünstigen Scara-Roboter YK-400XR und zeigt die Unterschiede des Hochgeschwindigkeitssystems gegenüber konventioneller Bildverar-beitung auf, durch die Zeiteinsparun-gen und Produktivitätsvorteile reali-siert werden. mehr ...

Yamaha zeigt Visionsystem auf der Motek

Die Harmonic Drive AG in Limburg hat mit den Hohlwellenservoantrieben der Baureihe Canis Drive den Spagat zwischen Kompaktheit und Perfor-mance erfolgreich gemeistert. Auf der etz@Tour erfuhr Frank Nolte von Ekrem Sirman Präsident und CEO der

Harmonic Drive AG was den Spezia-listen für Wellgetriebe auszeichnet sowie mehr über die Eigenschaften dieser besonderen Getriebe und über den Wandel vom Komponentenliefe-ranten zum Lösungsanbieter für hoch-präzise Antriebstechnik. mehr ...

etz@Tour bei Harmonic Drive in Limburg

Der Verwaltungsrat von ABB hat Björn Rosen-gren (Bild) einstimmig zum Chief Executive Officer ernannt. Er wird am 1. Februar 2020 bei ABB eintreten und CEO Peter Voser in dieser Funktion am 1. März 2020 ablösen. P. Voser wird ab die-sem Zeitpunkt bei ABB wieder aus-schließlich das Amt des Verwaltungs-ratspräsidenten ausüben. B. Rosen-gren: „Ich fühle mich sehr geehrt, bei ABB als einem echten globalen Tech-nologieführer diese faszinierende Aufgabe übernehmen zu dürfen. In einer für die Fertigungsindustrie so entscheidenden Zeit muss ABB auch künftig die Bedürfnisse globaler Kun-den bedienen.“ mehr ...

Neuer CEO bei ABB

Die Eltefa findet ab 2021 in der Ta-gesfolge von Dienstag bis Donners-tag statt. Auf Wunsch von Ausstellern und Besuchern rückt der Veranstalter den Branchentreff für das baden-württembergische Elektrohandwerk vom Freitag in die Wochenmitte. Zu-dem findet die Eltefa 2021 vom 20.

bis 22. April und damit vier Wochen später als bisher statt. Grund ist die komplette Auslastung des Stuttgar-ter Messegeländes im Jahr 2021 in den messestarken Monaten Februar und März. Ab 2023 ist der gewohnte Termin in der zweiten Märzhälfte ga-rantiert. mehr ...

Eltefa wechselt ab 2021 die TagesfolgeAnzeige

1/8 page horizontal: 190 mm × 30 mm

1/8 page:93 mm × 60 mm

1/4 page:93 mm × 120 mm

Mit einer stärkeren Trennung der Gruppe in die Sparten Automatisierungstechnik sowie Entwicklungs- und Produktionsdienstleistungen will Turck sein Wachstum nachhaltig stärken. So sollen die Entwicklungs- und Produktionskapazitäten mit der Fokussierung auf Technologie-Schwerpunkte an bestimmten Standorten international ausgebaut werden. Christian Wolf (schäftsführer der Turck-Holding: „Wir wollen in Europa, Asien und Amerika optimale Strukturen für Produktion, Logistik und Vertrieb schaffen, um die lokalen Kundenbedürfnisse ideal abdecken zu können.”

Neue Struktur bei Turck


93 mm × 60 mm

newsletter 8/2019

Anzeige



Anzeige

Anzeige














50 Jahre evg


1/8 page:93 mm × 60 mm




Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroVer triebsGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der Elektromechaniktributor evg mit Stammsitz in Mönchengladbach (

50 Jahre evg


468 × 60 Pixel or Advertorial

468 × 250 Pixelor

468 × 60 Pixel

468 × 60 Pixel

468 × 60 Pixel


2020

1 Advertising Sizes and Prices

Newsletter Announcement (HTML email)

Format Width × Height in pixel

Price

Premium Banner 468 × 250 € 2,950.–

Full Banner 468 × 60 € 1,125.–

Advertorial* max. 250 char. + picture + link € 1,340.–

Title Page of the PDF Newsletter

Format Width × Height in pixel

Price

Title Ad (Head) 190 × 30 € 790.–

1/8 page (center) 93 × 60 € 710.–

1/8 page (bottom) 190 × 30 € 710.–

Metrics

1 Subscribers: users, planers and suppliers of innovative solutions for the industry automation and persons responsible in the Management of industrial IT and industrial production.

2 Distribution: 11,882 recipients (as of September 2019)

On the Following Pages of the PDF Newsletter

Format Breite × Höhe in mm

Preis

1/4 page 93 × 120 € 680.–

1/8 page 93 × 60 € 460.–

1/8 page horizontal 190 × 30 € 460.–

Advertorial*

1/8 page (max. 630 char. + picture)

1/4 page (max. 1.350 char. + picture)

1/2 page (max. 2.200 char. + picture)

1/1 page (max. 5.700 char. + 2 pictures)

€ 520,–€ 925,–€ 1,630.–€ 2,715.–

* We only need your text, the picture(s), and the web link. We will then take care of the layout of the advertorial. A detailed information sheet is available upon request.

2 Discounts: –

3 Terms of Payment Weberbank Actiengesellschaft, Berlin, Acc. No. 6 123 549 039,

BIC 101 201 00, IBAN DE 36 1012 0100 6123 5490 39,SWIFT/BIC WELADED1WBB



P - N

Advertising Rates/ Metrics

Professional Journals

139 years of media expertise at your service

We know your company, your products and the target market. That makes the real difference in successful marketing. We provide a fi rst-class editorial environments for your advertisements (print & online) and achieve effective positioning for you in the market.

The ReportCorporate Publishing

Tell your clients about your products and solutions with the report

Advantages:

• independent title• medium in a neutral design creates confi dence• high-quality editorial staff• complete project development through the VDE VERLAG• image transfer• new: digital valorization• plus extensive promotion package

1

E4BR01Zap Titel Seite 1

etz-Report 39 www.etz.de

A810

0

STRATEGIEINTERVIEW

Immer ein bisschen Mehr bieten

DAS M1-SYSTEM

Hoch integriert, robust und

leistungsfähig

APPLIKATIONEN

Rund um Wind, Industry, Maritime

und Erneuerbare Energien

etz-Report 39www.etz.de

Eine Publikation in Zusammenarbeit mit Bachmann electronic

Engineeringzeiten

reduzieren

PartnerSpecialCorporate Publishing

Show editorial strength with the partner special

Advantages:

• your own editorial spread• inside title page• layout handled by the VDE VERLAG• no advertisement/no competition• interview appointment• high reach through additional e-paper

App Design

Additional media channel via content app

• content: e. g. etz report • additional benefi t: rich media content like videos

picture galleries, web links• We develop the entire project for you• promotion package

Advantages:

• additional channel for the report• increased distribution• reaching further user groups• ideal medium for sales support

Note: Your clients can get the app free of charge for iPad, iPhone, iPod touch and Android.

Distribution:

– as bound-in insert in a professional journal

– offprint for your company (500 issues)

– e-paper on our online platforms

– editorial notice for the e-paper

in our newsletters

Social Media

Your news and information in social media

As professional partners, we create the right content, and place news and up-to-date information on social media channels. Thus, you and your products generate more attention.

Advantages:

• outsourcing the topic of social media maintenance

• professional partner• more attention

SPECIAL: SMART ENERGY

Special Smart Energy

ENERGIEMESSGERÄTEWerkzeuge des Instandhalters NAHTLOSE INTEGRATIONElektrische Energieverteilung im Internet der Dinge

MODULARES SYSTEMIntelligenz in das Verteilnetz bringen

Bild

: PQ-

Plus

FERTIGUNGS- & MASCHINENAUTOMATION

24

www.etz.de 6/2018

Weltweite Bereitstellung der relevanten Daten

Ein cleveres Motormanagement setzten die Geräte der

EMM-Serie um. Sie bieten alle Vorteile einer modernen

Wirkleistungsüberwachung, schützen angeschlossene Lasten

wie Pumpen oder Stell- und Regelantriebe zuverlässig vor

Über- oder Unterlast und kontrollieren den Zustand konti-

nuierlich. Das eigentliche Schalten der Last führen die

Hybrid-Motorstarter aus, die bis zu vier Funktionen in

einem Gerät vereinen: Motorstart- und Wendefunktion bis

3 kW, Motorschutz gegen Überlast sowie einen Not-Halt bis

Performance Level PL e (Bild 6). Neben den Standardkom-

ponenten für die Parallelverdrahtung sind vernetzbare Vari-

anten erhältlich, die sich in Feldbusumgebun-

gen integrieren lassen. Die Vernetzung erfolgt

entweder über das sogenannte Interface-System

(IFS), das die jeweiligen Geräte über den Trag-

schienenbusverbinder (T-Bus) koppelt, oder

direkt über eine eingebaute IO-Link-Schnitt-

stelle. Beim Interface-System werden die Motor-

starter über ein Gateway, das beispielsweise für

Profinet, Profibus, Modbus/TCP, Ethernet/IP

und CANopen verfügbar ist, an die Steuerung

angeschlossen. Dabei lassen sich mehrere Mo-

torstarter über den T-Bus an das entsprechende

Gateway anbinden. Die Ansteuerung der Mo-

torstarter geschieht direkt über die Busleitung,

sodass digitale Ausgänge sowie die aufwendige

Parallelverdrahtung eingespart werden. Bei Be-

darf erhält der Anwender außerdem eindeutige

Zustandsmeldungen der Motorstarter, zum

Beispiel hinsichtlich des Ausfalls einer oder

mehrerer Phasen, einer Überlastwarnung und

-meldung, Unterlastmeldung, der Schaltspiel-

zahl oder des ak-tuell fließenden Motorstroms.

Eine Vernetzung über IO-Link beinhaltet die

gleichen Funktionen. In Zeiten von Industrie

4.0 werden so relevante Daten bereitgestellt und

Informationen über die in vernetzten Anlagen

eingesetzten Motoren weltweit zugänglich ge-

macht. Daraus ergeben sich Vorteile für die

Wartung, zumal die platzraubende Messtechnik

entfällt.

FazitSignale zwischen Steuerung und Feld entkop-

peln, Motoren, Pumpen und Ventile schalten,

Beleuchtungen aktivieren und deaktivieren,

Sensorsignale an die Steuerungen weiterleiten,

Sollwerte überwachen: Die Arbeitsfelder elektri-

scher Schaltgeräte sind vielfältig. Technologische

Entwicklungen in diesem Bereich, die Phoenix

Contact vorantreibt, werden dem Anwender

auch zukünftig einen Mehrwert bieten und den

Übergang in das digitale Zeitalter unterstützen.

Schon heute ist es möglich, die Schaltzustände

der weltweit verbauten einfachen Koppelrelais

über PLC Logic und die IoT-Plattform Profi-

cloud von Phoenix Contact zu erfassen. (mh)

Literatur[1] Phoenix Contact Electronics GmbH, Bad Pyrmont:

www.phoenixcontact.de/schaltenAutor

Dipl.-Ing. Udo Haumersen ist als Produkt-manager im Bereich Interface Components

für die Phoenix Contact Electronics GmbH

in Bad Pyrmont tä[email protected]

05 Mit seinem umfangreichen Zubehör erweist sich die Relais-Familie Rifline

Complete als passende Lösung für den industriellen Anwendungsbereich

06 Die Hybrid-Motorstarter Contactron vereinen bis zu vier Funktionen in

einem Gerät

Sour

ce: F

otol

ia

For Your Leadership in Communication: Content MarketingEstablished Brands and Media Modules

Tailored Information for Potential Clients

The Report

PartnerSpecial

Research

ProfessionalJournals

Corporate Publishing

App Design

Social Media

Business Talks /Webinars

Online Advisor

Microsite

Stand-Alone Newsletter

E-Paper

Digital Publishing

DIGITALFACTORYJOURNALopen

automationDas Fachmagazin für das Management

DAS FACHMEDIUM FÜR DEN ELEKTRO-PROFI

SPECIAL SECTION FOR RENEWABLE ENERGIESincluding

Your Contact:Ronny SchumannAdvertising Manager

Phone +49-69-84 00 06-13 40Fax +49-69-84 00 06-13 [email protected]

Content Marketing

Research

Customized Survey

• a customized survey developed in cooperation with your company

• execution of the survey with a renowned market research organization

• data is gathered in telephone interviews with etz readers (CATI interviews)

• evaluated and transmitted results

For example: level of product and brand awareness, competitive environment

Examples:– Do you know this company?

– Do you know this product?

– Which product do you associate with

this company?

Short Survey

Getting attention and gathering feedback, that is what you get out of our short surveys. You can ask our readers/users up to fi ve questions via our online platforms and newsletters.

Advantages:

• short-term survey • quick feedback• potential decision-making tool

Research ResearchCorporatePublishing

App Design Webinars Digital Publishing

Content media modules

Analysis of the current status

Performancemeasurement

Sample Campaign

Step 1 Step 2 Step 3

Complete Coverage of Automation and Electrical Engineering

Benefi t from Our Effective Media Modules

SONDERTEIL FÜR ERNEUERBARE ENERGIENinklusive

Elektroingenieure in der Projektierung, Planung,

Konstruktion und Entwicklung

Elektro-Handwerk

Planung undLeitung in der

Industrie

Produktions-leiter und

IT-Management

Technisches Managementund Unternehmensführung

Fertigungs-und Prozess-automation

Energie-verteilung

Gebäudeauto-mation

Electricalengineering

Electrical engineers in project development, planning, and construction

Technical management and corporate management

Assembly and process auto-

mation

Energy distribution

Buildingautomation

Production and IT Management

Planning and controlling

in industrial production

Online Advisor

The way important leads are generated

• continued development of market overviews in interactive online advisors (Pilot: IP20 IO Modules)

• guided navigation within product segments• guidance solutions according to changing needs• registration with request for contacting

Advantages:

• generating leads all throughout the year• reduced time and labor costs• ideal benefi t-cost-ratio (CPL)

Online advising for your own products

With an customized, qualifi ed online product guidance, you will generate a real added value for your clients. As experienced content producers for the automation industry, we know the market, your company and your products. We will take over content management for you, and, together with our strong partners, recognize to the technical implementation. That way, we will create an ideal guidance solution for your clients’ needs and open up new potentials for your sales and distribution.

Stand-AloneNewsletterDigital Publishing

irect information transfer to the key target group

• onely editorial news about your company• brief and concise overview:

new components, systems and solutions • special newsletter design (HTML)

of the respective professional journal

Advantages:

• editorial processing by our team• ideal for fast and direct marketing messages

MicrositeDigital Publishing

All information in one place on the microsite

• interviews• professional articles• editorial news• product videos• whitepapers• sample requests

Availability: up to 12 months online.

E-PaperDigital Publishing

We move your content into the spotlight

Apart from publishing your article in one of our professional journals, we will turn it into an optimized e-paper and we will also distribute your article via our newsletters and online platforms.

Business Talks / Webinars

We professionally organize your business talks

• professional production• presentation by independent editorial staff• live feed into the studio for the Q&A session• participation only after registration• view directly in the browser• no additional software required• extensive promotion package

General Terms of Business of VDE VERLAG GMBH for advertisements and third party inserts in magazines and books and for online advertising1. Area of ApplicationInsofar as nothing else is expressly confi rmed in writing by VDE VERLAG GMBH (“the Publisher”) all contractual relationships of each of the Publisher’s customers with the Publisher are governed solely by the following General Terms of Business. They are also solely binding when confl icting general terms of business of the Customer’s have not been explicitly rejected by the Publisher.

2. Defi nitions2.1. An advertisement is any promotional publication in printed materials or online offers of the Publisher.

2.2. An advertising order is a contract for publication of one or more advertisements of an advertiser or other person placing them on an online offer or in printed materials of the Publisher for the purpose of distribution. To become effective, such a contract must be confi rmed in writing by the Publisher.

2.3. A standard advertising contract is one with a term of 12 months.

2.4. Online advertising is, for example, advertising banners, pop-ups, white papers, webcasts, microsites, webinars, special interest and/or keyword placements on the Publisher’s online offers and in its electronic newsletters.

3. RebatesRebates on contracts with term of 12 months are based on the actual published scope of the advertisements during the 12 month period, insofar as the Publisher is not responsible for deviations from the agreed scope. In such a case the Customer shall pay the difference between the rebate granted in advance and the rebate as based on the actual scope of advertising.

4. Placement4.1. The Customer shall notify the Publisher in good time before the closing time for advertisements in the event that advertisements, inserts and other supplements are to be published in particular numbers, particular editions or in particular places of printed matter.

4.2. Such a notifi cation is made in good time if, assuming a normal course of business, the Customer can still be notifi ed in writing in the event that the Customer’s request cannot be carried out.

4.3. Placement requests for which a separate surcharge is not agreed are honoured solely at the Publisher’s free discretion.

4.4. If the Customer decides that contrary to the original order an advertisement is not to appear in a preferred location, then the Customer must notify the Publisher of this in writing at least 6 weeks before closing time for advertisements.

4.5. Online advertising is placed by the Publisher at its equitable discretion with due consideration given to the interests of the Customer. Insofar as nothing else is agreed, the Customer does not have a right to a particular placement within the Publisher’s online offers or newsletters.

5. Contents and Arrangement5.1. The Publisher is entitled to refuse to publish advertisements, inserts or other supplements, as well as online advertising, because of its contents, its origin or its technical form, insofar as its contents violate applicable law or public morals or publication would be unreasonable for the Publisher. A publication is unreasonable for the Publisher if, for example, inserts or other supplements can give readers the impression, through their form or design, that these are parts of the printed matter for which the Publisher is responsible, or, if they contain advertising from any third party. The Customer will be notifi ed of any such refusal to publish.

5.2. The publication of inserts and other supplements presupposes in principle that a sample has been submitted in advance.

5.3. Online advertising must be delivered by the Customer in accordance with the technical requirements of the Publisher no later than the deadline agreed in the order. The Publisher does not check whether or to what extent the advertising materials provided by the Customer are suitable for the Customer’s advertising purpose and are in keeping with the Customer’s needs. In the case of online advertising which due to its technical design allows collection and storage of usage data, the Customer assures that all such collection and storage of data is done in accordance with the statutory requirements (particularly those of the EU’s General Data Protection Regulation (GDPR)).

5.4. Advertisements and online advertising which due to their editorial design cannot be recognized as such can be made recogniz-able as such by a clear notice such as “Advertisement” that is added by the Publisher.

5.5. The Customer warrants that the advertising materials supplied by the Customer as well as any linked target sites do not violate applicable law, and do not compromise or violate any rights of any type of any third party. In particular, the Customer warrants that the advertising materials are designed so that (a) the impression of a system message cannot arise and (b) all functional elements (e. g. search screens, pop-up menus, selection boxes) can actually be activated.

5.6. The Customer is responsible for timely delivery of printing materials. The Publisher’s obligation to keep printing materials expires three months after the advertisement was published.

5.7. If the Customer does not notify the publisher of any dimensions for the advertisement, the Publisher will execute it in the smallest format that is possible.

5.8. The Customer assures that it is the holder of all required usage and exploitation rights to the advertisements and grants the Publisher a usage right to the advertising materials that is simple, non-exclusive, non-transferable, worldwide, and limited in time to the period and in contents to the purpose of the contract. The Customer agrees to indemnify the Publisher upon fi rst demand of all claims of third parties that assert a violation of rights and to render the Publisher compensation for all disadvantages and damages the Publisher sustains in this connection.

6. Publisher’s Warranty and Liability6.1. The Publisher warrants the print quality customary for orders of the type in question, in the context of the possibilities prescribed by the printing materials. If the printed advertisement is entirely or partially illegible, incorrect or incomplete, and if the Publisher is responsible for this, then the Customer shall have a right, as the Customer may choose, to a reduction in the price of the adver-tisement or to a replacement advertisement unless a replacement advertisement would be possible only at disproportionate costs.

6.2. The Publisher shall place online advertisements during the agreed period of time and keep the relevant websites available. The Publisher warrants that the website(s) on which online advertisements appear are available at least 161 hours per week. If, during the period of the contract, this availability stays behind what is contractually agreed, then the Customer shall be entitled to a reasonable reduction of the price. This does not apply if the inferiority of performance is insignifi cant.

6.3. The liability of the Publisher for compensation for damages is limited to intention and gross negligence, insofar as there is no loss of human life, bodily injury or damage to health and insofar as there is no violation of essential contractual obligations. In cases of slightly negligence violations of essential contractual obligations, the Publisher is liable only for the amount of damages that are typical of this type of contract and that could be foreseen when the contract was concluded. Liability of the Publisher for slightly negligent violations of non-essential obligations is barred.

6.4. The Publisher is liable for damages which arise from malfunctions of internet lines, servers or other facilities only to the extent that such malfunctions lie within the Publisher’s sphere of responsibility.

7. ProofsProofs are delivered only at the express request of the Customer. The Customer bears the risk that proofs are not delivered in time and that returned corrected proofs are not correct. If the corrected proofs are not received by the Publisher within the period of time specifi ed by the Publisher, then permission to print will be deemed to have been granted when this period of time for receiving corrected proofs has expired.

8. Specimen CopiesAfter publication, the Customer shall receive a complete copy as documentary evidence. With job and occasional advertisements, the page on which the advertisement appeared will be sent as documentary evidence. If it is no longer to procure a specimen copy, the Publisher will certify in writing that the advertisement was published.

9. Prices9.1. All prices are stated as net prices in addition to which the applicable statutory value added tax is to be paid.

9.2. Price changes that occur during the period of a 12 month contract with a company go into effect immediately, insofar as nothing else was already agreed.

9.3. The preparation of drawings, printing materials and signifi cant changes in submitted printing materials are charged at cost.

9.4. Insofar as nothing else is agreed, online advertising is offered at monthly fi xed prices. The Publisher does not guarantee parti-cular levels of click rates, ad impressions, leads or other access statistics.

10. Review of Online AdvertisingWhen online advertising is broadcast for the fi rst time, the Customer will review it without delay for proper placement and report any errors to the provider within three working days. Online advertising to which no objections are raised within this period is deemed to have been accepted.

11. Cancellation of Online Advertising11.1. Online advertising which has been ordered can be cancelled before the agreed date of fi rst broadcast. Cancellation must be made in writing.

11.2. Cancellations received more than 8 weeks before the date of fi rst broadcast are free of charge. Otherwise, the Publisher is entitled to invoice cancellation fees as follows:

– cancellation between 8 weeks and 4 weeks plus 1 day before fi rst broadcast: 50 % of the net order value,

– cancellation between 4 weeks and 1 week plus 1 day before fi rst broadcast: 75 % of the net order value,

– cancellation 1 week or less before fi rst broadcast: 100 % of the net order value.

12. Reduced Print RunsA reduced print run constitutes a defect that justifi es a price reduction only if the shortfall is 20 % or more with a print run of up to 50,000 copies. Then the price reduction is proportional to the shortfall.

13. Payment ConditionsPayments are due in full within 30 days. The Publisher reserves the right to demand advances from new customers.

14. Payment Default14.1. If payment is not received within 30 days after the date of fi rst appearance, then the Customer enters payment default even if there is no reminder. In a case of payment default by a customer which is an entrepreneur, the Publisher is entitled to charge a standard fee in the amount of 40 euros. This amount will be credited to compensation for damages in the event that the damages are based on the costs of collection. During the period of payment default, customers which are entrepreneurs are also charged default interest in the amount of 9 % above the base interest rate.

14.2. If the Customer is in payment default, the Publisher reserves the right to make further appearances of advertisements depen-dent on payment of advances even during an ongoing standard advertising contract.

15. Applicable Law and Place of Jurisdiction15.1. This contract is governed by the law of the Federal Republic of Germany.

15.2. The place of fulfi lment and jurisdiction for business with merchants, legal entities of public law and public law special funds is the legal domicile of the Publisher. If the place of residence or usual abode of the Customer is not known when litigation is fi led or if the Customer has moved his, her or its residence or place of usual abode to a location outside the area of applicability of the ZPO (German Code of Civil Procedure), then it is agreed that the place of jurisdiction is the legal domicile of the publisher.

16. Data ProcessingDuring the course of its business activity the Publisher uses a data processing system to process customer data in the framework prescribed by the EU’s General Data Protection Regulation (GDPR) as permissible. A data protection offi cer has been appointed by the Publisher.

17. Other RegulationsThe publisher does not take part in alternative dispute resolutions in front of consumer concilation boards.

AGB

34

2020

Media Kit

Your Contacts

Frank Nolte

Deputy Editor-in-Chief

Phone +49-69-84 00 06-13 20

Fax +49-69-84 00 06-13 98

[email protected]

Markus Hohl

Editor

Phone +49-69-84 00 06-13 22

Fax +49-69-84 00 06-13 98

[email protected]

Ronald Heinze

Editor-in-Chief

Phone +49-69-4 00 06-13 00

Fax +49-69-4 00 06-13 98

[email protected]

Inge Hübner

Editor

Phone +49-69-84 00 06-13 21

Fax +49-69-84 00 06-13 98

[email protected]

Ronny Schumann

Head of Advertising Department

Phone +49-69-84 00 06-13 40

Fax +49-69-84 00 06-13 98

[email protected]

Susanne Ney

Key-Account Manager

Phone +49-69-84 00 06-13 44

Fax +49-69-4 00 06-13 98

[email protected]

Kristina Lippmann

Order Management

Phone +49-69-84 00 06-13 43

Fax +49-69-84 00 06-13 98

[email protected]

Leonie Ströver

Order Management

Phone +49-69-84 00 06-13 42

Fax +49-69-84 00 06-13 98

[email protected]

Katja Hanel

Media Consulting

Phone +49-69-84 00 06-13 41

Fax +49-69-84 00 06-13 98

[email protected]

www.vde-verlag.de

VDE VERLAG GMBHKaiserleistraße 8 A63067 Offenbach · Germany

Phone +49 -69-84 00 06 -13 40, -13 41 or -13 42Fax +49 - 69-84 00 06 -13 98Email [email protected]

Subject to changes of prices and errors.The General Terms of Business of VDE VERLAG GMBH apply.

V1/

2020

Documents

The Technology and Practice Oriented Brand for Automation ... · Engineering Systems M2M, Teleservice, Remote Control, and Remote Maintenance Datalogger Modular Automation Energy