31
ICS 79.040; 79.060.99; 91.080.20 Timber structures Structural timber and glued laminated timber Determination of some physical and mechanical properties English version of DIN EN 408 Holzbauwerke – Bauholz für tragende Zwecke und Brettschichtholz – Bestimmung einiger physikalischer und mechanischer Eigenschaften European Standard EN 408 : 2003 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 124 ‘Structural timber’ (Secretariat: Denmark). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee). Amendments This standard differs from the April 1996 edition in that the test methods previously given in DIN EN 1193 have been included and the determination of a global modulus of elasticity in bending has been specified. Previous editions DIN EN 408: 1996-04; DIN EN 1193: 1998-06. DEUTSCHE NORM August 2004 DIN EN 408 { © No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Normenausschuss Bauwesen (NABau) im DIN English price group 14 www.din.de www.beuth.de 12.04 9587431 Continued overleaf. Document comprises 30 pages. Supersedes April 1996 edition and DIN EN 1193, June 1998 edition.

DIN EN 408-2004

Embed Size (px)

Citation preview

Page 1: DIN EN 408-2004

ICS 79.040; 79.060.99; 91.080.20

Timber structures

Structural timber and glued laminated timberDetermination of some physical and mechanical properties

English version of DIN EN 408

Holzbauwerke – Bauholz für tragende Zwecke und Brettschichtholz – Bestimmung einiger physikalischerund mechanischer Eigenschaften

European Standard EN 408 : 2003 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by CEN/TC 124 ‘Structural timber’ (Secretariat: Denmark).The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Buildingand Civil Engineering Standards Committee).

AmendmentsThis standard differs from the April 1996 edition in that the test methods previously given in DIN EN 1193have been included and the determination of a global modulus of elasticity in bending has been specified.

Previous editionsDIN EN 408: 1996-04; DIN EN 1193: 1998-06.

DEUTSCHE NORM August 2004

DIN EN 408 {

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Normenausschuss Bauwesen (NABau) im DIN

English price group 14www.din.de

www.beuth.de 12.04 9587431

Continued overleaf.Document comprises 30 pages.

Supersedes April 1996 editionand DIN EN 1193, June 1998edition.

Page 2: DIN EN 408-2004
Page 3: DIN EN 408-2004

English version

ICS 91.080.20; 79.040; 79.060.99 Supersedes EN 408 : 1995 andEN 1193 : 1997.

Management Centre: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

Timber structures

Structural timber and glued laminated timberDetermination of some physical and mechanical properties

© 2003. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN 408 : 2003 E

Structures en bois – Bois de struc-ture et bois lamellé collé – Détermina-tion de certaines propriétés physi-ques et mécaniques

Holzbauwerke – Bauholz für tragendeZwecke und Brettschichtholz – Be-stimmung einiger physikalischer undmechanischer Eigenschaften

This European Standard was approved by CEN on 2003-06-20.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË

EN 408

August 2003

Page 4: DIN EN 408-2004

Page 2EN 408 : 2003

3

4

4

4

5

5

6

6

6

6

7778

999

10

1011111111111212

1313131313131314

15151515

15151516

16161617

Page 5: DIN EN 408-2004

Page 3EN 408 : 2003

17171717

18181818

1818181919212121

212121222223

232323232425

2525252626

27

29

29

Page 6: DIN EN 408-2004

Page 4EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 7: DIN EN 408-2004

Page 5EN 408 : 2003

Page 8: DIN EN 408-2004

Page 6EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 9: DIN EN 408-2004

Page 7EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 10: DIN EN 408-2004

Page 8EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 11: DIN EN 408-2004

Page 9EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 12: DIN EN 408-2004

Page 10EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 13: DIN EN 408-2004

Page 11EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 14: DIN EN 408-2004

Page 12EN 408 : 2003

Page 15: DIN EN 408-2004

Page 13EN 408 : 2003

Page 16: DIN EN 408-2004

Page 14EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 17: DIN EN 408-2004

Page 15EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 18: DIN EN 408-2004

Page 16EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 19: DIN EN 408-2004

Page 17EN 408 : 2003

Page 20: DIN EN 408-2004

Page 18EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 21: DIN EN 408-2004

Page 19EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 22: DIN EN 408-2004

Page 20EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 23: DIN EN 408-2004

Page 21EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 24: DIN EN 408-2004

Page 22EN 408 : 2003

Page 25: DIN EN 408-2004

Page 23EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 26: DIN EN 408-2004

Page 24EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 27: DIN EN 408-2004

Page 25EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 28: DIN EN 408-2004

Page 26EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 29: DIN EN 408-2004

Page 27EN 408 : 2003

Page 30: DIN EN 408-2004

Page 28EN 408 : 2003

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

Page 31: DIN EN 408-2004

Page 29EN 408 : 2003