CATALOGO DE VENTOSAS
www.macla.es Vulkollan® m.r.Bayer‐Leverkusen
Flachsauger Flat suction cups Ventosas planas
APLangzeitsauger aus ACLATHAN® werden überwiegend als Vakuumsauger für die Manipulation von Werkstücken in horizontaler Lage eingesetzt. Durch ihre elastischen Dichtlippen und leichte Adaptermontage sind sie für ein schonendes Heben von Werkstücken bei niedrigen Montagekosten Bestandteil vieler Vakuum-Systeme. Biegesteife Artikel mit glatter bis leicht unebener Oberfläche sind sowohl horizontal als auch vertikal bei entsprechender Haltekraftkorrektur transportierbar. Näherungswerte aus Laborversuchen sind in den Tabellen für die gängigen Abmessungen angegeben und dienen der Vorauswahl. Praxisversuche in System- und Materialkombination sind für optimale Auswahl der Geometrie- und Materialausführung erforderlich. AP-Longlife Suction Cups of ACLATHAN® are mostly used as vacuum cups for the handling of workpieces in horizontal position.
On account of their elastic sealing lips and easy mounting of the adapters they are part of many vacuum systems for a gentle lifting of workpieces at low cost.
Bending-resistant articles with smooth or slightly uneven surface can be transported horizontally as well as vertically with corresponding correction of cohesion.
Approximate values based on lab tests are indicated in the tables for the bestselling sizes and serve as preselection. For an optimum selection of geometry and material type practical tests in system and material combination are necessary.
Ventosas de larga duración en VULKOLLAN® utilizadas principalmente para manipulation de piezas en el eje horizontal.
Gracias a la elasticidad y adaptabilidad de sus labios y la facilidad de montaje de los adaptadores pueden emplearse para manipular piezas delicadas a costes reducidos.
Modificando la intensidad de aspiración pueden también ser transportadas piezas indeformables dotadas de superficie lisa o ligeramente rugosa, tanto en posición vertical como horizontal.
Los valores indicados se han obtenido en ensayos de laboratorio y se dan a título orientativo para poder facilitar una preselección dimensional. Para obtener los resultados en la práctica es absolutamente necesario efectuar los ensayos atendiendo al sistema y a los materiales utilizados, así como la geometría y la dureza de las ventosas.
Index für Typenbezeichnung: Sauger rund = Sr Sauger rund mit Noppen = SrN Sauger rund mit Profil = SrP Sauger rund mit Noppen und Profil = SrNP
Index für Adapter: Aa = Aussengewinde Ai = Innengewinde L = Lang L.L = Überlang K = Kurz
Index for type designation: Suction Cup round = Sr Suction Cup round with knubs = SrN Suction Cup round with profile = SrP Suction Cup round with knubs and Profile = SrNP
Index for adapter: Aa = external thread Ai = internal thread L = long L.L = extra long K = short
Explicación de las abreviaturas: ventosa redonda =Sr ventosa redonda con tetones = SrN ventosa redonda perfilada =SrP ventosa redonda tetones y perfilada =SrNP
Abreviatura de los adaptadores: Aa = inserto metálico rosca "macho" Ai = inserto metálico rosca "hembra" L = largo L.L = extra largoK = corto
1.0
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
371 012
1,5 N 2 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø5
ø3
ø8
12
ø6
3
2,3
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: CD CD CD
max. Eingefedert max. compressed max. compresión
11,5 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
371 016
3 N 4,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø4,7
ø3,5
ø12
12
ø8
5,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: CD CD CD
max. Eingefedert max. compressed max. compresión
10,5 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0206WN
370 914
4 N 5,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø7,3
ø4,7
ø13
14
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Papier paper papel
max. Eingefedert max. compressed max. compresión
12,5 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0244WN
370 663
5 N 7 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal
Material: material: material:
ø6
ø14,5
ø9
ø14,5
6
14
3
ø5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Papier paper papel Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
11,5 mm
Type: Sr
Type: Sr
Type: SrP
1.1
Type: Sr
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0237WN
370 611
5 N 7,4 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø4,5
ø9
ø3
ø15
3
11
ø7
2
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Papier paper papel
max. Eingefedert max. compressed max. compresión
9 mm
E 3302609 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0227WN
370 424
5 N 7,4 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø4,5
ø9
ø3
ø15
3
11
ø7
2
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
10 mm
E 3302609 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE. 0145WN
370 749
5,4 N 7,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø8
ø4
ø15
11,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Glass glass vidrio
max. Eingefedert max. compressed max. compresión
9 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 716
6 N 8 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø7
ø3
ø16
13,5
0,9
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas Papier paper papel
max. Eingefedert max. compressed max. compresión
11,5 mm
Type: SrP
Type: SrP
1.2
Type: Sr
Type: Sr
max. Haltekraft max. lifting power max. fuerza elevación
Adapter adapter
adaptador
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0123WN
370 716.01
6 N 8 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: matrial:
ø7
ø3
ø16
13,5
0,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas Papier paper papel
max. Eingefedert max. compressed max. compresión
11,5 mm
max. Haltekraft max. lifting power max. fuerza elevación
Adapter adapter
adaptador
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0003WN
370 268
7 N 9,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø16
ø3
ø17
12
ø11
22
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. comprimé
21 mm
Adapter adapter
adaptador
max. Haltekraftmax. lifting powermax. fuerza de elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0612WN
370 612
9,4 N 13 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø4,5
ø11
ø3
ø20
3
13
ø7
2
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
9,5 mm
E 3302609 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraftmax. lifting powermax. fuerza de elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0108WN
370 685
9,5 N 13 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø9
ø6
ø20
7
ø11,5
11,
7
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
4,5 mm
1.3
Type: Sr
Type: Sr
Type: SrP
Type: SrP
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0159WN
370 835
9 N 12,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø6
ø12
ø8
ø20
6
13,6
3
ø5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
11 mm
E 3310052 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0012WN
370 316
9,5 N 13,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø6
ø14
ø9
ø20
6
13,6
3
ø3
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
10 mm
E 3310052 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0054WN
370 427
9,5 N 13,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø6
ø14
ø9
ø20
6
14
3
ø5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
11 mm
E 3310052 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0047WN
370 320
10,4 N 14,5 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø10,5
ø3
ø21
10
ø16
22,
5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
6 mm
Type: Sr
Type: Sr
Type: Sr
1.4
Type: Sr
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0058WN
370 457
14 N 20 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø6
ø14
ø8
ø24,5
2,5
14,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
11 mm
E 3310052 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.:
Código: PVE.0081WN
14 N 20,5 NE-no.: t:
:
material:
370 569 E-Nr.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nurosca tuerca exagonal
Material: material:
ø6
ø14
ø8
ø24,5
2,5
14,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Ve
rpackung packing embalaje
d max. compresión
E 3310052 Aa G 1/8“; SW 14 Aluminiomax. Eingefedert max. compresse
10 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.:
Código: PVE.0007WN
14,7 N 21 NE-no.: t:
rosca tuerca exagonal:
material:
370 332 E-Nr.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nu
Material: material:
ø16
ø3
ø25
12
ø11
22
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Ve
rpackung packing embalaje
d max. compresión
max. Eingefedert max. compresse
19,5 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0011WN
370 333
17 N 24 NE-no.: t:
e
material:
E-Nr.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nurosca tuerca exagonal:
Material: material:
ø12
ø6
ø27
20
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por exemplo: Ve
rpackung packing embalaje
d max. compresión
19 mm
max. Eingefedert max. compresse
Type: Sr
Type: Sr
Type: SrN
Type: SrN
1.5
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0001WN
370 157
18,5 N 26 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø14
ø6,5
ø28
71,7
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
4 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0002WN
370 267
38 N 43 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø16
ø3
ø30
12
ø11
22
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
19 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0613WN
370 613
25 N 35 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø4,5
ø16,5
ø6
ø30
5
17
2
ø4,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
14 mm
E 3302609 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0033WN
370 327
32 N 39 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø8
ø16
ø11
ø30
7
13
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
9,5 mm
E 3311541
E 3306432
E 3317624
E 3316522
Aa G 1/4“; SW 19
Ai G 1/4“ K; SW 19
Aa G 1/8“; SW 19
Aa M10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Type: Sr
Type: SrP
Type: SrN
Type: SrN
1.6
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0076WN
370 539
34 N 41 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø8
ø16
ø11
ø30
7
13,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
9 mm
E 3311541
E 3306432
E 3317624
E 3316522
Aa G 1/4“; SW 19
Ai G 1/4“ K; SW 19
Aa G 1/8“; SW 19
Aa M10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0045WN
370 410
34 N 49 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø8
ø16
ø11
ø30
7
17
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
11 mm
E 3311541
E 3306432
E 3317624
E 3316522
Aa G 1/4“; SW 19
Ai G 1/4“ K; SW 19
Aa G 1/8“; SW 19
Aa M10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0139WN
370 744
34 N 43 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø14
ø22
ø17,7
ø30
14,5
25
2,5
ø3
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
22,5 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0026WN
370 349
34 N 51 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: matériau:
ø7
ø13
ø9
ø35
3,5
11
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
6 mm
E 3317517
Aa G 1/8“; SW 17
Aluminio
Type: Sr
Type: SrN
Type: SrP
Type: Sr
1.7
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0614WN
370 614
45 N 68 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø10,3
ø17
ø12,85
ø40
8
17
2
ø6,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
11 mm
E 3302610
E 3313067
E 3319659
Aa G 1/4“; SW 17
Ai G 1/4“; SW 19
Ai G 3/8“; SW 22
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 983
39 N 49 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø20,5
ø12
ø41
28
Einsatzgebiet z.B.: field of application, for example: ecampos de aplicación, por ejemplo: Säcke bags sacos/bolsas
max. Eingefedert max. compressed max. compresión
22 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
371 009
35 N 49 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø20,5
ø13,3
ø41
28
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Säcke bags sacos/bolsas
max. Eingefedert max. compressed max. compresión
22 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0176WN
370 982
34 N 45 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø20,5
ø14,5
ø41
28
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Säcke bags sacos/bolsas
max. Eingefedert max. compressed max. compresión
22,5 mm
Type: SrN
Type: Sr
Type: Sr
Type: Sr
1.8
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
371 008
41 N 51 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø20,5
ø15
ø41
28Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Säcke bags sacos/bolsas
max. Eingefedert max. compressed max. compresión
22,5 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0032WN
370 328
81 N 110 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: matériau:
ø8
ø16
ø11
ø50
10
1717
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
13 mm
E 3310561
E 3305015
E 3312809
E 3317591
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aa M 10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0615WN
370 616
58 N 63 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø10,3
ø19
ø12,8
ø50
8
22
2
ø6
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
16 mm
E 3302610
E 3313067
E 3319659
Aa G 1/4“; SW 17
Ai G 1/4“; SW 19
Ai G 3/8“; SW 22
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0046WN
370 411
54 N 75 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø8
ø16
ø11
ø50
10
25
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
17 mm
E 3310561
E 3305015
E 3312809
E 3317591
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aa M 10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Type: Sr
Type: SrN
Type: SrN
1.9
Type: SrN
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0008WN
370 339
56 N 105 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø28
ø54
20
ø24
9
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
15 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0009WN
370 260
72 N 110 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø8
ø18
ø12
ø55
10
21
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
15 mm
E 3310561
E 3305015
E 3312809
E 3317591
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aa M 10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0617WN
370 617
70 N 90 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø10,3
ø19
ø12,85
ø55
8
27
2
ø10
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas de plástico
max. Eingefedert max. compressed max. compresión
20 mm
E 3302610
E 3313067
E 3319659
Aa G 1/4“; SW 17
Ai G 1/4“; SW 19
Ai G 3/8“; SW 22
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0618WN
370 618
68 N 100 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø10,3
ø19
ø12,8
ø60
8
27
2
ø8
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Anlagen material handling plants manipulación industrial
max. Eingefedert max. compressed max. compresión
20 mm
E 3302610
E 3313067
E 3319659
Aa G 1/4“; SW 17
Ai G 1/4“; SW 19
Ai G 3/8“; SW 22
Aluminio
Aluminio
Aluminio
Type: Sr
1.10
Type: Sr
Type: SrP
Type: SrN
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0064WN
370 479
120 N 140 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø9
ø19
ø12,5
ø61,5
12
33
ø9
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
26 mm
E 3310561
E 3305015
E 3312809
E 3317591
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aa M 10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0619WN
370 619
110 N 135 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø10,3
ø18,5
ø12,8
ø70
8
27
2
ø6
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Glas glass vidrio
max. Eingefedert max. compressed max. compresión
18 mm
E 3302610
E 3313067
E 3319659
Aa G 1/4“; SW 17
Ai G 1/4“; SW 19
Ai G 3/8“; SW 22
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0116WN
370 585
172 N 216 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø14
ø26
ø18
ø80
11
23
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
16 mm
E 3309167
E 3309166
Aa G 1/4“; SW 19
Ai G 1/4“; SW 19
Aluminio
Aluminio
max. Haltekraft max. lifting power max. fuerza elevación
Adapter adapter
adaptador
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0031WN
370 329
161 N 209 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca tuerca exagonal:
Material: material: material:
ø14
ø26
ø18
ø80
14
26
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Keramik ceramics ceramica
Kunstoffteile plastic parts piezas plastico
Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
19 mm
1.11
Type: SrN
Type: SrN
Type: SrNP
Type: SrN
max. Haltekraft max. lifting power max. fuerza elevación
Adapter adapter
adaptador
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0621WN
370 621
186 N 233 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal
Material: material: material:
ø10,3
ø22
ø12,8
ø90
8
30
2
ø6
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Keramik ceramics ceramica
Kunstoffteile plastic parts piezas plastico
Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
23 mm
E 3302610
E 3313067
E 3319659
Aa G 1/4“; SW 17
Ai G 1/4“; SW 19
Ai G 3/8“; SW 22
Aluminio
Aluminio
Aluminio
max. Haltekraft max. lifting power max. fuerza elevación
Adapter adapter
adaptador
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0138WN
370 743
147 N 150 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø9
ø24
ø13
ø100
20
32
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Keramik ceramics ceramica
Kunstoffteile plastic parts piezas plastico
Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
22 mm
E 3314346
Aa G 1/4“ L; SW 19
Aluminio
max. Haltekraft max. lifting power max. fuerza elevación
Adapter adapter
adaptador
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0622WN
370 622
147 N 150 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca tuerca exagonal:
Material: material: material:
ø10,4
ø24
ø6
ø100
8
32
ø12,8
2
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Keramik ceramics ceramica
Kunstoffteile plastic parts piezas plastico
Bleche metal sheets chapa/fleje
max. Eingefedert max. compressed max. compresión
22 mm
E 3302610
E 3313067
E 3319659
Aa G 1/4“; SW 17
Ai G 1/4“; SW 19
Ai G 3/8“; SW 22
Aluminio
Aluminio
Aluminio
Type: SrNP
Type: SrNP
Type: SrNP
1.12
- 1.14 -
- 1.15 -
Flachsauger mit Metallteil „Aussengewinde“ Flat suction cups with metal part „external thread“
Ventosas planas con inserto metálico "macho"
APLangzeitsauger aus ACLATHAN® bilden eine kompakte Baueinheit, um stabile Hebevorgänge durchzuführen und höhere Lasten ohne Abreißrisiko übernehmen zu können. Je nach Einsatzgebiet sind die Metalle in Messing, Aluminium oder Stahl ausgeführt – sowohl Innengewinde als auch Außengewinde sind herstellbar. Näherungswerte aus Laborversuchen sind in den Tabellen für die gängigen Abmessungen angegeben und dienen der Vorauswahl. Praxisversuche in System- und Materialkombination sind für optimale Auswahl der Geometrie- und Materialausführung erforderlich.
AP-Longlife Suction Cups of ACLATHAN® form a compact building unit in order to carry out stable lifting actions and take over higher loads without breakaway risk. Depending on the field of application the metal parts are made of brass, aluminium or steel and can be supplied with internal or external thread.
Approximate values based on lab tests are indicated in the tables for the bestselling sizes and serve as preselection. For an optimum selection of geometry and material type practical tests in system and material combination are necessary.
Las ventosas de larga duración en VULKOLLAN® con inserto metálico son conjuntos muy estables y compactos asegurando una elevación de piezas pesadas sin riesgo de rotura. Los insertos pueden fabricarse, según la utilización, en latón, en aluminio o en aciero. Pueden suministrarse en ejécución de rosca "macho" o "hembra".
Los valores indicados se han obtenido en ensayos de laboratorio y se dan a título orientativo para poder facilitar una preselección dimensional. Para obtener los resultados en la práctica es absolutamente necesario efectuar los ensayos atendiendo al sistema y a los materiales utilizados así como a la geometría.
Index für Typenbezeichnung: Sauger rund mit Metallteil = SrmM WN=VULKOLLAN®,Bayer-LeverkusenSauger rund mit Metallteil und Noppen = SrmMP
Index for type designation: Suction Cup round with metal = SrmM Suction Cup round with metal and profile = SrmMP
Explicación de las abreviaturas: ventosa redonda + inserto metalico = SrmM ventosa redonda perfilada + inserto metalico = SrmMP
2.0
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0109WN
370 691
50 N 64 N
ø23,5
ø10
40,5
2317
,5
M10
ø10
ø42
40,5
2317
,5
Einsatzgebiet z.B.: field of application, for example: campos de aplication, por ejemplo: Kunstoffteile plastic parts piezas plástico Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
34,5 mm
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0037WN
370 336
55 N 71 N
ø23,5
ø10
40,5
2317
,5
M10
ø42
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
32,5 mm
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0149WN
370 756
94 N 113 N
ø26
43,5
2617
,5
ø10
ø60
M10
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
32,5 mm
Adaptermaterial: Aluminium adapter material: aluminium material del adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0223WN
370 951
89 N 118 N
ø30
1011
M8x1
ø5
ø60
21
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
29 mm
Type: SrmM
2.1
Type: SrmMP
Type: SrmMP
Type: SrmMP
Adaptermaterial: Aluminium adapter material: aluminium material del adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 984
200 N 250 N
ø60
1110
G1/4”
ø9
ø75
30
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
26,5 mm
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código. PVE.0209WN
370 920
140 N 169 N
ø30
49,5
35,5
14
ø12
ø80
M14x1,5
Einsatzgebiet z.B.: field of application, for example: camos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
33 mm
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0086WN
370 555
140 N 169 N
ø30
49,5
35,5
14
ø12
ø80
M10
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
33 mm
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0137WN
370 742
203 N 225 N
ø46
49,5
35,5
14
ø8
ø98,5
M10
Einsatzgebiet z.B.: field of application, for example: ecampos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
31 mm
2.2
Type: SrmMP
Type: SrmMP
Type: SrmMP
Type: SrmMP
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0103WN
370 662
310 N 350 N
ø65
40
2113
ø100
M14x1,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
34 mm
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0006WN
370 235
310 N 350 N
ø65
40
2113
ø100
G3/8”
G1/8”
8
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
34 mm
Adaptermaterial: Stahl adapter material: steel material del adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0136WN
370 741
306 N 321 N
ø66
49,5
35,5
14
ø8
ø120
M10
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa o flejes
max. Eingefedert max. compressed max. compresión
29 mm
Type: SrmMP
2.3
Type: SrmMP
Type: SrmMP
Flachsauger mit Metallteil „Innengewinde“ Flat suction cups with metal part „internal thread“
Ventosas planas con inserto metalico "hembra"
APLangzeitsauger aus ACLATHAN® bilden eine kompakte Baueinheit, um stabile Hebevorgänge durchzuführen und höhere Lasten ohne Abreißrisiko übernehmen zu können. Je nach Einsatzgebiet sind die Metalle in Messing, Aluminium oder Stahl ausgeführt – sowohl Innengewinde als auch Außengewinde sind herstellbar. Näherungswerte aus Laborversuchen sind in den Tabellen für die gängigen Abmessungen angegeben und dienen der Vorauswahl. Praxisversuche in System- und Materialkombination sind für optimale Auswahl der Geometrie- und Materialausführung erforderlich.
AP-Longlife Suction Cups of ACLATHAN® form a compact building unit in order to carry out stable lifting actions and take over higher loads without breakaway risk. Depending on the field of application the metal parts are made of brass, aluminium or steel and can be supplied with internal or external thread.
Approximate values based on lab tests are indicated in the tables for the bestselling sizes and serve as preselection. For an optimum selection of geometry and material type practical tests in system and material combination are necessary.
Las ventosas de larga duración en VULKOLLAN® con inserto metálico son conjuntos muy estables y compactos asegurando una elevación de piezas pesadas sin riesgo de rotura. Los insertos pueden fabricarse, según la utilización, en latón, en aluminio o en acero. Pueden suministrarse en ejecución de rosca "macho" o "hembra".
Los valores indicados se han obtenido en ensayos de laboratorio y se dan a título orientativo para poder facilitar una preselección dimensional. Para obtener los resultados en la práctica es absolutamente necesario efectuar los ensayos atendiendo al sistema y a los materiales utilizados así como la geometría de las ventosas.
Index für Typenbezeichnung: WN=VULKOLLAN® Bayer-Leverkusen Sauger rund mit Metallteil = SrmM Sauger rund mit Metallteil und Noppen = SrmMP
Index for type designation: Suction Cup round with metal = SrmM Suction Cup round with metal and profile = SrmMP
Explicación de las abreviaturas: ventosa redonda + inserto metálico = SrmM ventosa redonda perfilada + inserto metálico = SrmMP
3.0
Adaptermaterial: Messing adapter material: brass material adaptador: latón
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 991
91 N 103 N
ø35
36
2610
ø18
ø50
G3/8”
SW22
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
31 mm
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 994
104 N 124 N
ø36,5
26
206
ø20
ø57
3/8-18NPT
ø25
Einsatzgebiet z.B.: field of application, for example: exemples d`application, par exemple: Kunstoffteile plastic parts piezas plástico Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. comprimé
18 mm
Adaptermaterial: Messing adapter material: brass material adaptador: latón
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 992
180 N 208 N
ø35
36
2610
ø18
ø75
G3/8”
SW22
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
26 mm
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 341
171 N 241 N
ø35
41,5
35,5
6
ø20
ø80
G3/8”
ø21
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
32 mm
Type: SrmM
Type: SrmMP
Type: SrmMP
Type: SrmMP
Adaptermaterial: Messing adapter material: brass material adaptador: latón
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 993
306 N 385 N
ø42
40
3010
ø20
ø100
G3/8”
SW22
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
31 mm
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0006WN
370 235
310 N 350 N
ø65
40
2113
ø100
G3/8”
G1/8”
8
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
34 mm
Type: SrmMP
Type: SrmMP
3.2
Langhalssauger Long-necked suction cups
Ventosas de caña larga
APLangzeitsauger aus ACLATHAN® werden überwiegend als Vakuumsauger für die Manipulation von Werkstücken in horizontaler Lage eingesetzt. Die Langhalsausführung ist für die Rohrmontage mittels Rohrschelle und geringfügigem kardanschen Ausgleich bei unebenen Teilen verwendbar. Durch ihre elastischen Dichtlippen und leichte Adaptermontage sind sie für ein schonendes Heben von Werkstücken bei niedrigen Montagekosten Bestandteil vieler Vakuum-Systeme. Biegesteife Artikel mit glatter bis leicht unebener Oberfläche sind sowohl horizontal als auch vertikal bei entsprechender Haltekraftkorrektur transportierbar. Näherungswerte aus Laborversuchen sind in den Tabellen für die gängigen Abmessungen angegeben und dienen der Vorauswahl. Praxisversuche in System- und Materialkombination sind für optimale Auswahl der Geometrie- und Materialausführung erforderlich. AP-Longlife Suction Cups of ACLATHAN® are mostly used as vacuum cups for the handling of workpieces in horizontal position.
The long-necked execution is used with uneven parts for tube mounting by means of a wall clamp and slight cardanic compensation.
On account of their elastic sealing lips and easy mounting of the adapters they are part of many vacuum systems for a gentle lifting of workpieces at low cost.
Bending-resistant articles with smooth or slightly uneven surface can be transported horizontally as well as vertically with corresponding correction of cohesion.
Approximate values based on lab tests are indicated in the tables for the bestselling sizes and serve as preselection. For an optimum selection of geometry and material type practical tests in system and material combination are necessary.
Ventosas de larga duración en VULKOLLAN® utilizadas principalmente para manipular piezas en el eje horizontal.
La ejecución de cuello o caña alta se utiliza para fijación por tubular y presenta la ventaja de poder igualar los movimientos cuando la pieza a elevar no está completamente lisa.
Solo con modificar la intensidad de la aspiración pueden transportarse piezas indeformables con superficies lisas o rugosas en posición vertical o horizontal.
Los valores indicados se han obtenido en ensayos de laboratorio y se dan a título orientativo para poder facilitar una preselección dimensional. Para obtener los resultados en la prática es absolutamente necesario efectuar los ensayos atendiendo al sistema y a los materiales utilizados así como a la geometría y la dureza de las ventosas.
4.0
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1006WN
370 600
1 N 1,5 N
ø1,2
ø4ø2
ø6,3
8
12
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Optik optical industry óptica
max. Eingefedert max. compressed max. compresión
10,5 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1010WN
370 601
2 N 3 N
ø2
ø5ø3
ø10
9
13
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Optik optical industry óptica
max. Eingefedert max. compressed max. compresión
11,5 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1016WN
370 602
6 N 8 N
ø3
ø8ø5
ø16
13
20
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Optik optical industry óptica
max. Eingefedert max. compressed max. compresión
17,5 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1025WN
370 603
18 N 22 N
ø4
ø12ø8
ø25
21
30
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
26 mm
4.1
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1030WN
370 604
27 N 35 N
ø5
ø16ø10
ø30
21,5
35
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
31 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1040WN
370 605
44 N 54 N
ø6
ø20ø12
ø40
29
45
ø6
ø20ø12
ø40
29
45
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Druckindustrie printing industry imprentass
Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
40 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0154WN
370 334
42 N 53 N
ø6
ø24ø17
ø40
26
45
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Bleche metal sheets chapa/flejes Karton cardboard cartonaje
max. Eingefedert max. compressed max. compresión
45 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1055WN
370 609
75 N 100 N
ø8
ø28ø18
ø55
38
60
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Bleche metal sheets chapa/flejes Karton cardboard cartonaje
max. Eingefedert max. compressed max. compresión
52,5 mm
4.2
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.1063WN
370 610
95 N 131 N
ø8
ø32ø20
ø63
31,5
60
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Bleche metal sheets chapa/flejes Karton cardboard cartonaje
max. Eingefedert max. compressed max. compresión
52 mm
4.3
Faltensauger 1,5 fach Bellows-type suction cups 1,5 fold
Ventosas de fuelle ( x 1,5 )
APLangzeitsauger aus ACLATHAN® sind entsprechend ihrer Faltenzahl und Geometrie sehr anpassungsfähig an Hubweg und Unebenheiten. Die in Saugrichtung hohe Flexibilität erlaubt auch den Einsatz auf unebenen oder gebogenen Oberflächen. Näherungswerte aus Laborversuchen sind in den Tabellen für die gängigen Abmessungen angegeben und dienen der Vorauswahl. Praxisversuche in System- und Materialkombination sind für optimale Auswahl der Geometrie- und Materialausführung erforderlich.
AP-Longlife Suction Cups are adaptable to the lift height and unevenness of surface depending on the number of folds. The high flexibility in the vacuum direction allows the use also on uneven or curved surfaces.
Approximate values based on lab tests are indicated in the tables for the bestselling sizes and serve as preselection. For an optimum selection of geometry and material type practical tests in system and material combination are necessary.
Las ventosas de larga duración en VULKOLLAN® con fuelle se adaptan particularmente bien a la altura precisa y a la forma de las piezas a manipular. La geometria y la cantidad de fuelles se elijen en función de la forma y del estado superficial de las piezas a manipular, conservando siempre una gran flexibilidad respecto del eje de aspiración.
Les valores indicados se han obtenido en ensayos de laboratorio y se dan a título orientativo para poder facilitar una preselección dimensional. Para obtener los resultados en la práctica es absolutamente necesario efectuar los ensayos atendiendo al sistema y a los materiales utilizados, así como la geometría de las ventosas.
Index für Typenbezeichnung: Sauger mit Falten 1,5 = SF 15 Sauger mit Falten und Nuten = SFN 15 Sauger mit Falten und Noppen = SFNN 15
Index für Adapter: Aa = Aussengewinde Ai = Innengewinde L = Lang L.L = Überlang K = Kurz
Index for type designation: Suction Cup with 1,5 folds = SF 15 Suction Cup with folds and grooves = SFN 15 Suction Cup with folds and knubs = SFNN 15
Index for adapter: Aa = external thread Ai = internal thread L = long L.L = extra long K = short
Explicación de las abreviaturas: ventosa con 1,5 fuelles = SF 15 ventosa con fuelles y ranuras = SFN 15 ventosa con fuelles y tetones = SFNN 15
Abreviatura de los adaptadores: Aa = inserto metálico "macho" Ai = inserto metálico "hembra"L = largo L.L = extra largo K = corto
5.0
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
371 002
5 N 8 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: matériau:
ø12
19
ø14
ø9
ø6
6
3
ø4,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
12 mm
E 3310052 Aa G 1/8“; SW 14 Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
371 014
7 N 10 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø6,6
ø13
15
ø8
ø4
6,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: CD CD CD
max. Eingefedert max. compressed max. compresión
7,5 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 731
17 N 20 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø8
ø20
18
ø16
ø12
ø9
7
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: CD CD CD
max. Eingefedert max. compressed max. compresión
13 mm
E 3317624
Aa R 1/8“; SW 19
Aluminium
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
371 000
22 N 24 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø12
ø20
22
ø15
ø12
ø6
7
ø22
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
13 mm
1.9
Type: SF 15
1.9
Type: SF 15
5.1
Type: SF 15
Type: SF 15
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0055WN
370 625
22 N 23 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø9
ø24,5
36
ø15,5
ø10,5
ø7,6
15Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
24 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0128WN
370 730
15 N 20 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø7,5
ø24,5
28
ø15,5
ø10,5
ø7,65
6,7
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
12 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0143WN
370 748
25 N 30 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø15
13
ø26
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Druckindustrie printing industry imprentas
max. Eingefedert max. compressed max. compresión
4 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0163WN
370 699
32 N 37 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø15
ø30
22
ø16
ø11
ø8
7
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
13 mm
E 3311541
E 3306432
E 3317624
E 3316522
Aa G 1/4“; SW 19
Ai G 1/4“ K; SW 19
Aa G 1/8“; SW 19
Aa M10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Type: SF 15
5.2
Type: SF 15
Type: SF 15
Type: SF 15
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 998
34 N 41 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø17
ø30
30
ø20
ø12
ø6
7
ø34
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por exemplo: Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
19 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0193WN
370 889
49 N 65 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø16
30
ø23
ø12,5
12
ø9
9,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
17 mm
E 3310561
E 3305015
E 3312809
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0180WN
370 588
31 N 47 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø29
ø48,5
41,2
ø20,5
ø12,8
ø10
8,5
2,5
ø51,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemple: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
24 mm
E 3302610
E 3317517
Aa G 1/4“; SW 17
Aa G 1/8“; SW 17
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0179WN
370 391
68 N 84 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø28
41,2
ø20,5
ø10
ø51,5
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
26 mm
Type: SFNN 15
Type: SF NN15
1.9 5.3
Type: SF 15
Type: SFNN 15
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0091WN
370 587
96 N 154 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø25
ø54,5
42
ø20,5
ø12,8
ø10
8,5
2,5 Einsatzgebiet z.B.:
field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
26 mm
E 3310561
E 3305015
E 3312809
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.
370 999
78 N 105 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø33
36,5
ø28,5
ø20
ø9
7
ø56
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
23 mm
E 3306432
E 3317624
Ai G 1/4“ K; SW 14
Aa G 1/8“; SW 19
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0192WN
370 888
97 N 125 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø26
40
ø23
ø9
20
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
28 mm
E 3314346
E 3312147
Aa G 1/4“ L; SW 19
Ai G 1/4“ L; SW 19
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0184WN
370 878
145 N 166 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
ø26
ø85
57
ø21
ø12,5
ø8,5
12
2,5 Einsatzgebiet z.B.:
field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
28 mm
E 3314346
E 3312147
Aa G 1/4“ L; SW 19
Ai G 1/4“ L; SW 19
Aluminio
Aluminio
Type: SF 15
Type: SFNN 15
5.4
Type: SFN 15
Type: SFN 15
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: Código: PVE.0106WN
370 676
180 N 210 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
ø26
57
ø21
ø9
20ø12,5
12 2
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
31 mm
E 3314346
E 3312147
Aa G 1/4“ L; SW 19
Ai G 1/4“ L; SW 19
Aluminio
Aluminio
Type: SF 15
1.9 5.5
- 6.0 -
Faltensauger 2,5 fach Bellows-type suction cups 2,5 fold
Ventosas de fuelle ( x 2,5 )
APLangzeitsauger aus ACLATHAN® sind entsprechend ihrer Faltenzahl und Geometrie sehr anpassungsfähig an Hubweg und Unebenheiten. Die in Saugrichtung hohe Flexibilität erlaubt auch den Einsatz auf unebenen oder gebogenen Oberflächen.
Näherungswerte aus Laborversuchen sind in den Tabellen für die gängigen Abmessungen angegeben und dienen der Vorauswahl. Praxisversuche in System- und Materialkombination sind für optimale Auswahl der Geometrie- und Materialausführung erforderlich.
AP-Longlife Suction Cups are adaptable to the lift height and unevenness of surface depending on the number of folds. The high flexibility in the vacuum direction allows the use also on uneven or curved surfaces.
Approximate values based on lab tests are indicated in the tables for the bestselling sizes and serve as preselection. For an optimum selection of geometry and material type practical tests in system and material combination are necessary.
Las ventosas de larga duración en VULKOLLAN® con fuelle se adaptan particularmente bien a la alturaprecisa y a la forma de las piezas a manipular. La geometria y el número de fuelles se elijen enfunción de la forme y del estado superficial de las piezas a manipular, conservando siempre gran flexibilidadrespecto al eje de aspiración.
Los valores indicados se han obtenido en ensayos de laboratorio y se dan a título orientativo para poder facilitar una preselección dimensional. Para obtener los resultados en la práctica es absolutamente necesario efectuar los ensayos atendiendo al sistema y a los materiales utilizados, así como la geometría.
Index für Typenbezeichnung: Sauger mit Falten 2,5 = SF 25 Sauger mit Falten und Nuten = SFN 25 Sauger mit Falten und Noppen = SFNN 25
Index für Adapter: Aa = Aussengewinde Ai = Innengewinde L = Lang L.L = Überlang K = Kurz
Index for type designation: Suction Cup with 2,5 folds = SF 25 Suction Cup with folds and grooves = SFN 25 Suction Cup with folds and knubs = SFNN 25
Index for adapter: Aa = external thread Ai = internal thread L = long L.L = extra long K = short
Explicación de las abreviaturas: ventosa con 2,5 fuellets = SF 25 ventosa con fuelles y ranuras = SFN 25 ventosa con fuelle,ranuras y botones= SFNN 25
Abreviatura de los adaptadores: Aa = inserto metálico "macho" Ai = inserto metálico "hembra" L = largo L.L = extra largo K = corto
- 6.1 -
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.
371 013
Type: SF 25
2 N 3 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: CD CD CD
max. Eingefedert max. compressed max. compresión
11 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.
370 986
Type: SF 25
14 N 18 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
13 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0115WN
370 698
Type: SF 25
14 N 19 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Papier paper papel
max. Eingefedert max. compressed max. compresión
16 mm
E 3317624
E 3306432
E 3333037
Aa R 1/8“; SW 19
Ai G 1/4“ K; SW 14
Aa M 5; SW 14
Aluminio
Aluminio
PA
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0044WN
370 401
Type: SF 25
22 N 30 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
16 mm
E 3311541
E 3306432
E 3317624
E 3316522
Aa G 1/4“; SW 19
Ai G 1/4“ K; SW 19
Aa G 1/8“; SW 19
Aa M10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
- 6.2 -
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.
370 985
Type: SF 25
32 N 36 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
22 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0014WN
370 335
Type: SF 25
42 N 52 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Glas glass vidrio Säcke bags sacos/bolsas
max. Eingefedert max. compressed max. compresión
13 mm
E 3311541
E 3306432
E 3317624
E 3316522
Aa G 1/4“; SW 19
Ai G 1/4“ K; SW 19
Aa G 1/8“; SW 19
Aa M10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0042WN
370 398
Type: SF 25
61 N 86 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalage Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
20 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0087WN
370 583
Type: SF 25
61 N 86 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut:rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje Kunstoffteile plastic parts piezas plástico
Glas glass vidrio
max. Eingefedert max. compressed max. compresión
20 mm
E 3310561
E 3305015
E 3312809
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aluminio
Aluminio
Aluminio
- 6.3 -
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.
370 987
Type: SFNN 25
85 N 120 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico
max. Eingefedert max. compressed max. compresión
27 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0088WN
370 577
Type: SF 25
84 N 118 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
31 mm
E 3310561
E 3305015
E 3312809
E 3317591
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aa M10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0080WN
370 533
Type: SF 25
170 N 230 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
47,5 mm
E 3310561
E 3305015
E 3312809
E 3312148
E 3312149
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aa G 1/4“ LL; SW 19
Ai G 1/4“ LL; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Aluminio
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0178WN
370 858
Type: SFN 25
173 N 240 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
41,5 mm
E 3314346
E 3326629
Aa G 1/4“ L; SW 19
Ai G 1/4“ L; SW 19
Aluminio
Aluminio
- 7.0 -
Oval- und Sondersauger Oval and Special suction cups Ventosas ovaladas y especiales
APLangzeitsauger aus ACLATHAN® sind durch besondere Geometrien und Materialeinstellungen als Vakuumsauger vielseitig einsetzbar. Besondere Ausführungen, nach Zeichnung, Muster oder in Absprache, sind durch die Formgebung und Lippenausbildung dem Verwendungszweck anpaßbar. Die Adapter sind, falls erforderlich, auch durch zusätzliche Metalleinlagen im festen Verbund mit dem elastischen Material. Dadurch ergeben sich bei hochelastischen Lippen großflächige biegesteife Sauger. Doppelanschlüsse oder Arretierungsstifte sowie Montagehilfen sind so einplanbar.
Näherungswerte aus Laborversuchen sind in den Tabellen für die gängigen Abmessungen angegeben und dienen der Vorauswahl. Praxisversuche in System- und Materialkombination sind für optimale Auswahl der Geometrie- und Materialausführung erforderlich.
AP-Longlife Suction Cups of ACLATHAN® can be used as vacuum suckers for a variety of applications on account of special geometries and material types.
Special executions as per drawing or samples can be adapted to the requirements by the shape and lip configuration. If required the adapters are firmly adhered to the elastic material by additional metal inserts. Thus large-surface and bending resistant suckers can be offered with highly elastic lips.
Therefore double connections or stopping pins as well as mounting aids can be planned.
Approximate values based on lab tests are indicated in the tables for the bestselling sizes and serve as preselection. For an optimum selection of geometry and material type practical tests in system and material combination are necessary.
Las ventosas de larga duracción en VULKOLLAN® pueden utilizarse de forma polivalente gracias a lasdiferentes formes, geometrías y materiales en que pueden fabricarse.
Cualquier forma puede obtenerse, bien sea según plano, muestras o después de efectuar un estudio para hallar una solución efectiva. Los adaptadores pueden integrarse ya en la fabricación o posteriormente . Se obtienen así ventosas rígidas, de gran surperficie y dotadas de labios con una gran elasticidad.
Insertos de doble efecto, pernos de guía y topes que puedan facilitar el montaje son tenidos previamente en cuenta en el diseño y ejecución de la ventosa.
Los valores indicados se han obtenido en ensayos de laboratorio y se dan a título orientativo para poder facilitar una preselección dimensional. Para obtener los resultados en la práctica es absolutamente necesario efectuar los ensayos atendiendo al sistema y a los materialers utilizados, así como la geometría y la dureza de las ventosas Index für Typenbezeichnung: Sauger rund = Sr Sauger rund mit Metall = SrmM Sauger oval = So Sauger oval mit Noppen = SomN Sauger oval mit Metall = SomM Sauger oval mit Metall und Noppen = SomMN
Index für Adapter: Aa = Aussengewinde Ai = Innengewinde L = Lang L.L = Überlang K = Kurz
Index for type designation: Suction Cup round = Sr Suction Cup round with metal = SrmN Suction Cup oval = So Suction Cup oval with knubs = SomN Suction Cup oval with metal = SomM Suction Cup oval with metal and knubs = SomMN
Index for adapter: Aa = external thread Ai = internal thread L = long L.L = extra long K = short
Explicación de las abreviaturas: ventosa redonda =Sr ventosa redonda coc inserto metálico = SrmM ventosa ovalada = So ventosa ovalada con tetones = SomN ventosa ovalada con inserto metálico = SomM ventosa ovalada con inserto metálco y con tetones = SomMN
Abreviatura de los adaptadores: Aa = inserto metálico "macho" Ai = inserto metálico "hembra" L = largo L.L = extra largo K = corto
- 7.1 -
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0029WN
370 467
Type: SoN
11 N 15 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
21 mm
Adapter adapter
adaptador
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0004WN
370 302
Type: So
46 N 68 N
E-Nr.: E-no.: E-no.:
Gewinde und SW thread and width over flats of hexagonal nut: rosca/tuerca exagonal:
Material: material: material:
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Verpackung packing embalaje
max. Eingefedert max. compressed max. compresión
14 mm
E 3310561
E 3305015
E 3312809
E 3317591
Aa G 1/4“ K; SW 19
Ai G 1/4“; SW 19
Aa G 1/8“; SW 19
Aa M 10; SW 19
Aluminio
Aluminio
Aluminio
Aluminio
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0177WN
370 829
Type: SomMN
46 N 62 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación por ejemplo: Kunstoffteile plastic parts piezas plástico
Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
32 mm
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0111WN
370 692
Type: SomMN
72 N 96 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Kunstoffteile plastic parts piezas plástico
Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
35 mm
- 7.2 -
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0205WN
370 913
Type: SomM
79 N 100 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
14 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0266WN(13)
370 842
Type: SomMN
84 N 102 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
32 mm
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0211WN
370 922
Type: SomM
255 N 300 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
23 mm
Adaptermaterial: Aluminium adapter material: aluminium matrial adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0212WN
370 923
Type: SomM
255 N 300 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
23 mm
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
Gewindestift: Stahl threaded pin: steel espiga roscada: acero
- 7.3 -
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0092WN
370 627
Type: SomM
261 N 310 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
23 mm
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
Gewindestift: Stahl threaded pin: steel espiga roscada: acero
- 8.1 -
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0234WN
370 948
Type: SrP
40 N 65 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Wellpappe
corrugated paper cartón ondulado
max. Eingefedert max. compressed max. compresión
18 mm
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0242WN
370 997
Type: SrmM
45 N 70 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
18 mm
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0199WN
370 899
Type: SrmM
54 N 75 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
18 mm
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0200WN
370 900
Type: SrNmM
___ N ___ N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
21 mm
- 8.2 -
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0028WN
370 361
Type: Sr
152 N 210 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Wellpappe
corrugated paper cartón ondulado
max. Eingefedert max. compressed max. compresión
28 mm
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0020WN
370 314
Type: SrmM
154 N 215 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
27 mm
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0241WN
370 996
Type: SFmMP 15
___ N ___ N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
23 mm
Adaptermaterial: Stahl adapter material: steel material adaptador: acero
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0201WN
370 901
Type: SrNmM
___ N ___ N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
23 mm
- 8.3 -
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.0240WN
370 995
Type: SFmMP 15
___ N ___ N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
25 mm
Adaptermaterial: Aluminium adapter material: aluminium material adaptador: aluminio
max. Haltekraft max. lifting power max. fuerza elevación
-0,5 bar -0,7 bar
Art.-Nr.: art.no.: PVE.
371 065
Type: SrmMP
350 N 530 N
Einsatzgebiet z.B.: field of application, for example: campos de aplicación, por ejemplo: Bleche metal sheets chapa/flejes
max. Eingefedert max. compressed max. compresión
32,5 mm
- 9.1 -
Scheibensauger Disk type Sucker Ventosas planas
APLangzeitscheibensauger aus ACLATHAN® werden aus Flachmaterial mechanisch in die gewünschte Dimension gebracht. Das Lippenprofil ist parallel gleichmäßig dick. Die Form der Saugglocke wird durch die umgebenden Bauteile bestimmt. Vorspannung und Geometrie des Adapters sowie die Materialdicke bestimmen die konische Form und Funktion des Saugers. Haltekraft und Verformweg ist dadurch nur am Artikel empirisch bestimmbar und kann im Zusammenwirken mit der Haftfläche ermittelt werden. Diese Saugerart ist überwiegend für leichte empfindliche Teile, kurzfristige provisorische Tests oder Sonderabmessungen mit geringen Bedarfszahlen vorgesehen.
AP-Longlife Disk-type Suckers are mechanically made from sheet material. The lip profile has got a uniform thickness. The shape of the sucker is determined by the surrounding components. Prestressing and geometry of the adapter as well as material thickness determine the conical shape and function of the sucker. Therefore lifting power and deformation can only be calculated empirically in interaction with the contact surface. This kind of sucker is mainly used for light and delicate parts, provisional tests or special dimensions with low quantities.
Las ventosas planas se fabrican en las dimensiones solicitadas a partir de placas semi-acabadas en material MACLATAN® AP y VULKOLLAN®. Las surperficies de las ventosas planas son perfectamente paralelas y del mismo espesor. La form obtenida después del montaje depende del adaptador. La fuerza de succión y la deformación de la ventosa plana dependerá de su superficie. Este tipo de ventosas se utiliza para la manipulación de piezas ligeras y frágiles, con dimensiones especiales y prototipos disponibles en cantidades reducidas.
øD von ø20 bis ø50 øD from ø20 to ø50 øD de ø20 a ø50
Einsatzbeispiel: Example of application:Ejemplo de utilización:
Adapter adapter adaptador
Scheibensauger Disk type Sucker Ventosa plana
ød angepaßt an Aufnahme ød1/ød2 ød executed for adapter ød1/ød2 ød ejecución para adaptador ød1/ød2
s von 0,7 bis 5 s from 0,7 to 5 s de 0,7 a 5